759fdffda5
Update ports/atmel-samd/boards/pyportal_titano/board.c
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-04-14 18:24:58 -05:00
1d8a073c05
nrf: protomatter port
2020-04-14 18:24:58 -05:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
a51d4f7a45
pycubed: add trailing newline to file
...
POSIX specifies that text files end in a trailing newline
2020-04-14 18:24:54 -05:00
db01f88cc3
enable MICROPY_PY_REVERSE_SPECIAL_METHODS where ulab is enabled
2020-04-13 19:58:52 -05:00
83a55f65a4
Implement cache-based reads
2020-04-13 15:14:38 -04:00
426d2afe28
Fix pin mapping for the H7 Nucleo
2020-04-13 14:36:49 -04:00
6227e63cc5
Merge remote-tracking branch 'upstream/master' into stm32x7-setup
2020-04-13 12:03:56 -04:00
5ac38c95cc
Various requested fixes
2020-04-13 12:03:05 -04:00
cac4fb0318
Merge branch 'master' into nfc_copy
2020-04-09 17:05:11 -05:00
49771b4d7f
Update to v1.3
2020-04-09 14:27:51 -05:00
92a0621e59
Add busio support, cleanup
2020-04-09 13:43:19 -04:00
01941c027b
Fix up STM
...
Enable the Alarm IRQ earlier and correct bit clearing.
2020-04-08 14:41:57 -07:00
d0a25ca9ac
Tweaks based on dhalberts feedback
2020-04-08 10:49:46 -07:00
181ecf4a9b
fixing my goofy CROSS_COMPILE fix
2020-04-07 21:54:46 -07:00
a53a26be70
missed a debug flag
2020-04-07 18:24:53 -07:00
826837186c
adds standard (non-queued) SPI support to QSPI for external flash
2020-04-07 18:17:25 -07:00
6544bf52fb
Enable SNVS interrupt
...
The iMX RT has a separate wake up controller, the GPC, that replaces
the NVIC when asleep. It adds the ability to only wake up on certain
interrupts. It seems that it requires at least one enabled interrupt
in the NVIC to turn on it's wake up circuitry. It doesn't need to
be the same interrupt as the wake up signal. For example, the RTC
in the SNVS can wake us up if a USB interrupt is enabled. Before
then it won't work. So, we enable the SNVS interrupt on start up
so it can wake us up.
2020-04-07 17:15:18 -07:00
aae0ce6bad
Fix autoreload and ticks on IMX RT
2020-04-07 14:16:07 -07:00
a8dfba235c
Fix alarm so that it is correctly set.
2020-04-07 13:07:29 -07:00
c0ba2a839f
Updates based on feedback from jepler
2020-04-06 16:03:31 -07:00
08f369ea96
mimxrt1011: Only re-init SPI when it's actually needed
...
If some crazy code (*cough* FourWire) decides to reconfigure the bus
before every transfer, it might get a bit slow...
2020-04-06 22:10:12 +02:00
e99cf6e441
Rework sleep timing
...
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
2020-04-03 18:07:56 -07:00
7e69d30c02
Fix nRF PulseIn
2020-04-03 14:22:56 -07:00
9761672d42
Linker file restructure, TCM and MPU additions
2020-04-03 16:33:18 -04:00
46af4bdd0e
Fix SAMD21 PulseIn
2020-04-02 17:35:52 -07:00
47a5d83267
Implement F7 Nucleo
2020-04-02 11:47:16 -04:00
9845a064ad
ports: fomu: move more functions into ram for stability
...
The SPI flash on current Fomu firmware is slow. Circuitpython runs
XIP from SPI flash, and so execution time can also be slow. Ordinarily
this isn't a problem, however certain operations are time-sensitive.
In particular, USB function needs to be handled quickly in order to
prevent the host from re-enumerating the device.
Place several critical TinyUSB structures into RAM, as well as several
hot functions that are frequently called. This reduces execution time
at the expense of system memory, and greatly improves system stability.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-02 11:21:22 +08:00
2f764ded63
merge and docs
2020-04-01 13:52:53 -04:00
a89928c13c
Implement requested changes
2020-04-01 13:02:05 -04:00
77562a2acd
Update the supported ports
2020-03-31 18:27:55 -07:00
75b7f583d2
Update LiteX APIs for new tick
2020-03-31 17:52:23 -07:00
1071924701
Fix thunderpack build
2020-03-31 17:05:37 -07:00
317b96e93a
Fix iMX builds
2020-03-31 17:00:30 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
4b063aeb29
Hack up STM32 PulseIn so it builds
2020-03-31 15:12:11 -07:00
f47b964c5f
Merge pull request #2726 from xobs/fomu-circuitpython
...
ports: litex: add port and fomu board
2020-03-31 13:51:09 -07:00
cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server
...
Fix PacketBuffer server support
2020-03-31 13:39:34 -07:00
c69f7f8657
ports: litex: use dfu.py instead of dfu-suffix.py
...
dfu.py now generates proper dfu suffixes without the nonstandard prefix.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 13:04:59 +08:00
34ea140783
ports: fomu: build dfu as part of Makefile
...
Now that we have a replacement for `dfu-suffix`, construct a dfu
image rather than a UF2 image.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 11:42:55 +08:00
065441e58c
ports: litex: enable itcm region for fomu
...
This adds a new command line flag -DFOMU to indicate we're building
for a Fomu board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 09:40:38 +08:00
786e79ebc9
ports: litex: add port and fomu board
...
This adds support for Litex, along with support for the Fomu FPGA board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 09:40:38 +08:00
e8cffcf978
Merge pull request #2740 from arturo182/mimxrt10xx_neopixel
...
mimxrt10xx: Fix neopixel_write
2020-03-30 17:49:14 -07:00
13022be299
mimxrt10xx: Fix neopixel_write
2020-03-31 01:05:03 +02:00
7cfa8e1a68
board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.
2020-03-29 18:59:00 -04:00
e2be069686
Support cached internal flash on the H743
2020-03-28 18:30:46 -04:00
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
a4a458943d
Correct MIMXRT sdk version
2020-03-27 15:40:17 -07:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
e4c4a4a3de
Swap to committed dependencies
2020-03-27 14:39:59 -07:00
b043384949
Update built in display init
2020-03-27 14:35:29 -07:00
7995bcac40
Flash additions
2020-03-27 14:15:33 -04:00
7fa38e8725
Update board name to bdmicro_vina_m0 to eliminate hyphens.
2020-03-27 13:37:59 -04:00
14a1e5756e
Merge branch 'master' of https://github.com/adafruit/circuitpython
2020-03-26 20:28:54 -04:00
2ae9edcbff
Add new board BDMICRO 'Vina M0'.
...
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.
Has been extensively tested with CircuitPython and works well.
2020-03-26 20:15:54 -04:00
348df4be2b
Merge remote-tracking branch 'upstream/master' into stm32x7-setup
2020-03-26 18:16:11 -04:00
c4db8b87e2
Add F7 and H7 Support to the STM32 port
...
Restructures the STM port of Circuitpython to be more generic about the STM32 chip lines to support
the F7 and H7 series of chips. Adds the new Packages directory to organize different chip layouts
between lines. Makes general changes to the Makefile to condense board-level flags to the minimum
and support the new chip series. Adds the new chip line to the Peripherals directory, along with
new python tools used to generate peripheral text automatically in the tools/ directory.
2020-03-26 18:01:17 -04:00
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight
...
Add backlight polarity flag to Display
2020-03-26 14:00:47 -07:00
3959548054
Merge pull request #2734 from theacodes/add-flash-for-sol
...
Add GD25Q64C as a flash chip for Sol
2020-03-26 13:27:56 -07:00
ff67571e9a
Add GD25Q64C as a flash chip for Sol
2020-03-26 12:33:27 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
7bba79363a
allowing backlight change
2020-03-25 22:41:23 -07:00
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling
2020-03-25 17:41:47 -07:00
18c12e7822
mimxrt10xx: Return proper UART read length when everything was read
2020-03-26 00:15:48 +01:00
3551b769a2
Fix connection handle tracking in PacketBuffer when a server.
2020-03-25 13:31:18 -07:00
59eb35da30
Merge pull request #2727 from burtyb/commander-1
...
Add support for Commander
2020-03-25 11:00:11 -07:00
ea0ce39962
Simplify STM a bit.
2020-03-24 15:49:24 -07:00
5e1e4d32db
Get basic sleep going on the iMX RT 1011
2020-03-24 15:46:10 -07:00
5e559be9b5
Remove Adafruit_CircuitPython_CircuitPlayground
2020-03-24 21:10:34 +00:00
f414f2b588
Merge pull request #2723 from jgillick/jgillick/circuitpython/stm32f411
...
Add new STM board: Thunderpack
2020-03-24 12:27:20 -07:00
c961ed9025
Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files
2020-03-24 13:25:02 -04:00
8ed4deee9d
Rename pins
2020-03-23 23:06:55 -07:00
a8ed6d993c
Switch iMX RT to RTC. Untested.
2020-03-23 18:20:58 -07:00
653b7619ec
Add back microsecond delay to STM32
2020-03-23 16:09:50 -07:00
c0c4c4403a
Factor out stm32f4xx_hal_conf.h
2020-03-23 14:46:25 -07:00
29ce756709
PR feedback.
2020-03-22 18:41:19 -07:00
a79ac35173
Rename NVM_BYTEARRAY_BUFFER_SIZE
2020-03-22 15:20:58 -07:00
68195a8dfe
Update NVM_BYTEARRAY_BUFFER_LEN
2020-03-22 15:19:53 -07:00
39a19d54c2
Add support for Commander
2020-03-22 16:23:56 +00:00
d76b76cb1d
Add non-volatile memory support to STM
2020-03-22 02:22:59 -07:00
c62b724b24
Merge remote-tracking branch 'circuitpython/master' into jgillick/circuitpython/stm32f412c
2020-03-21 23:36:15 -07:00
2623022c84
Initial work for STM32. Need to fix us delay and PulseIn still.
2020-03-20 12:58:34 -07:00
d9e491a9e8
Remove unnecessary change
2020-03-19 00:02:23 -07:00
284073584a
Cleanup
2020-03-19 00:01:32 -07:00
9be2ab6008
Change the board to use an STM32F411 chip.
2020-03-18 23:55:18 -07:00
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button
...
Add board support for Winterbloom Big Honking Button
2020-03-18 17:37:59 -07:00
e027aaf433
Remove some build options, fix order of boards in build.yml
2020-03-18 16:49:10 -07:00
7332adfa21
Add board support for Winterbloom Big Honking Button
2020-03-18 16:29:44 -07:00
679314a22e
Fix disable VBUS sensing.
2020-03-18 00:35:20 -07:00
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab
...
update ulab
2020-03-17 15:33:08 -07:00
6db11cf68b
Fix up Spresense build. It doesn't sleep.
2020-03-17 14:21:45 -07:00
d9e68156b2
fix up SAMD21 sleep
2020-03-17 12:10:35 -07:00
d6342af980
ulab: rename enable macro so it appears in the support matrix
2020-03-17 09:33:03 -05:00
24d1fd2bf1
PR Cleanup.
2020-03-17 00:48:19 -07:00
d41ef45a9b
Update clock.
2020-03-17 00:36:18 -07:00
cbc0e0344d
Revert changes to system_stm32f4xx.c
2020-03-17 00:36:12 -07:00
07549b7fd9
Bring back trimmed spaces.
2020-03-17 00:27:04 -07:00
c8d9edd939
Merge pull request #2705 from NightSkySK/UARTlogger2
...
add UARTLogger2 board support for CircuitPython
2020-03-16 16:28:42 -07:00
bb3ed3a827
Merge branch 'master' into stm32x7-setup
2020-03-16 12:37:53 -04:00
8a93a81a26
Chip specific code.
2020-03-15 22:31:36 -07:00
5dbdf72472
Fix LED port.
2020-03-15 19:36:16 -07:00
f884c2b9b6
Incremental update
2020-03-15 19:34:41 -07:00
6f153804da
Add initial thunderpack port files.
2020-03-14 00:03:14 -07:00
76ca13b6ed
Fix SAMD51 pulsein
2020-03-13 17:21:15 -07:00
7100d5e485
Fix autoreload and ticks in general
2020-03-13 16:13:24 -07:00
df5be65423
Update FrequencyIn for new clock API.
2020-03-13 16:12:52 -07:00
c9aa50817c
add UARTLogger2 board support for CircuitPython
2020-03-13 21:39:17 +01:00
4fba4eb133
Switch from 1k RTC input to 32k output
2020-03-13 11:16:41 -07:00
48b5f2a384
Initial work on SAMD
2020-03-13 11:16:41 -07:00
affd3fcc2a
Clear the pending IRQ in the NVIC as well.
2020-03-13 11:16:38 -07:00
00d5f63e7c
Hopefully fix PulseIn
2020-03-13 11:12:31 -07:00
ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well.
2020-03-13 11:12:31 -07:00
418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD
2020-03-13 11:12:31 -07:00
6f60afe8c5
First try at lowering the power consumption
2020-03-13 11:12:30 -07:00
3a5f79acef
Merge pull request #2701 from hierophect/stm32-submodule-swap
...
STM32: Change ST drivers submodule to match TinyUSB
2020-03-13 10:47:54 -07:00
85f44e20cb
Merge pull request #2695 from TG-Techie/master
...
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
ef7370d023
Change ST drivers submodule to match TinyUSB
2020-03-12 17:14:09 -04:00
18442c5b00
Merge remote-tracking branch 'upstream/master' into stm32-port-namechange
2020-03-12 15:40:44 -04:00
0155fab356
Revise style on interrupt handler functions
2020-03-12 15:03:47 -04:00
bb167f04fa
WIP
2020-03-12 14:54:43 -04:00
ead32ea6e6
Comment change for CI
2020-03-12 11:21:32 -04:00
197dc344af
fix requested changes
2020-03-12 02:31:13 -04:00
127e531271
remove old directory
2020-03-11 18:16:52 -04:00
be7def128a
submodule move and sync
2020-03-11 18:16:16 -04:00
53b1544f41
create copy
2020-03-11 18:13:06 -04:00
38064750f9
Merge remote-tracking branch 'upstream/master' into stm32-pulsein
2020-03-11 16:39:11 -04:00
2b161d37df
stm32: add PulseIn module
2020-03-11 16:37:40 -04:00
b967a2071f
changed TG-Watch02A HW_BOARD_NAME
2020-03-10 23:07:25 -04:00
50b451ae0c
add TG-Watch02A board def
2020-03-10 22:40:55 -04:00
6363b5ad06
Merge pull request #2693 from jepler/ulab-enable
...
ulab: enable on most builds
2020-03-10 09:48:46 -04:00
03a2b2faf1
ulab: don't enable on m0 boards
2020-03-09 23:00:21 -05:00
66aa0dec60
stm32: enable ulab
...
This is needed because stm32 defines CIRCUITPY_MINIMAL_BUILD "for early
port".
2020-03-09 15:54:40 -05:00
e128d770f1
cdx56: prepare to enable ulab
...
This involves fixing support for SRC_MOD and enabling INTERNAL_LIBM
including adding support for SRC_LIBM.
2020-03-09 15:54:40 -05:00
fec84054d9
ah
2020-03-06 15:03:37 -05:00
7198056bc3
Merge pull request #2 from adafruit/5.0.x
...
5.0.x
2020-03-06 13:57:31 -05:00
03dfd28121
trying to pull 5.0.x
2020-03-06 13:52:47 -05:00
210c3274e5
Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup
2020-03-05 17:47:01 -05:00
409a4a9490
Disable the HID USB descriptor for Sol
...
It's not used and ends up being confusing for folks.
2020-03-04 23:22:46 -08:00
b4e1955526
Merge pull request #2583 from jepler/ulab
...
Add 'ulab' as an extmod; enable on nrf and most samd51 boards
2020-03-04 11:46:17 -08:00
4aec5d1e83
Merge pull request #2680 from hierophect/stm32-clock-hotfix
...
STM32: Fix restriction on GPIO clock enables for F407 Discovery board
2020-03-04 11:43:33 -08:00
da31acfcc4
Merge remote-tracking branch 'origin/master' into ulab
2020-03-03 20:13:53 -06:00
55e13715a9
Expand GPIO clock enables for F405 and F407
2020-03-03 17:21:47 -05:00
3178462218
Merge branch 'master' into stm32-pulseout
2020-03-03 15:03:19 -05:00
2fea811c30
Merge pull request #2672 from jepler/fuzz
...
Makefiles: add targets to build unix port, mpy-cross for fuzzing
2020-03-03 11:36:53 -08:00
17458ad81a
Merge pull request #2662 from jepler/issue2332
...
Fix unaligned disk reads properly
2020-03-03 11:27:50 -08:00
eb71bfe9d3
Exclude SoCs without basic timers
2020-03-02 11:22:40 -05:00
74bf17bb0d
Makefiles: add targets to build unix port, mpy-cross for fuzzing
...
This assumes you have properly install afl-fuzz with afl-clang-fast.
Tested with AFLplusplus 2.60c-75-g2c6847b.
2020-03-01 11:48:33 -06:00
dc64857a7d
Merge branch 'master' into ulab
2020-02-29 21:54:39 -06:00
8435935429
update uses of assert_pin_free; remove redundant checks
2020-02-29 15:37:32 -05:00
611ef27ac2
stm32: Add PulseOut support
...
Matches the implementations of the NRF and Atmel ports. TIM7 is used as it does not have a tied pin. Contains some register micromanagement since HAL support for the TIM7 timer is limited.
2020-02-29 14:47:47 -05:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
0af00cf914
Freeze adafruit_requests and adafruit_esp32spi into feather_m7_1011
2020-02-29 00:39:22 +01:00
3f26a0b06b
Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011
2020-02-29 00:26:39 +01:00
eef742bf45
oofatfs: Remove _FS_DISK_READ_ALIGNED
...
This workaround is no longer needed, so it can be removed.
Closes : #2332
2020-02-28 10:04:28 -06:00
1e6c08fc30
nrf: sqpi_flash: Handle unaligned reads
2020-02-28 10:03:37 -06:00
527eb2444c
added TG-Watch02A pins
2020-02-28 04:11:54 -05:00
6d4ffc69fd
add TG-Watch02A
2020-02-28 02:52:46 -05:00
fa3b9eba92
ulab: Incorporate it
2020-02-27 11:03:03 -06:00
4c710cf13b
unix port: add help(), help('modules')
2020-02-27 08:31:01 -06:00
09a3153bf4
Fix I2C clock divider
2020-02-27 14:08:39 +00:00
1b33cd11fc
Merge pull request #2658 from mubes/spi_fixes
...
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixups
2020-02-26 16:37:05 +01:00
aadb0bfc1e
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixup
2020-02-26 14:28:54 +00:00
86e9fd170a
move red LED to D13 and make D3 lsm6ds IRQ
2020-02-25 18:00:23 -05:00
f20255813f
samd51 thing plus: new port
...
testing performed:
* successfully store and retrieve a 500kB file on the flash
* square wave output on each pin appears on o'scope
* board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
28c7a1e9c3
Fix crash after empty REPL session
...
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
dcc8abf74e
Merge pull request #2638 from fgallaire/master
...
Arduino Nano 33 IoT support
2020-02-22 00:12:06 -05:00
96db16a7a2
Last NINA pins
2020-02-22 04:30:18 +01:00
f63b2c0d0c
use realloc instead
2020-02-21 17:36:15 -05:00
9cf46ec947
put neopixel_write buffer in root pointers
2020-02-21 08:44:25 -05:00
23d6a3dc1f
merge from upstream
2020-02-20 22:27:16 -05:00
39ec5d0e51
Add NINA pins
2020-02-21 01:34:52 +01:00
634d246910
relicense nrf SPI.c to MIT
2020-02-20 16:00:21 -05:00
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011
...
mimxrt10xx: Add Feather M7 1011 board config
2020-02-20 10:15:57 -08:00
feac87901a
mimxrt10xx: Enable displayio
...
Closes #2466
2020-02-19 22:26:00 +01:00
aa0cf38084
mimxrt10xx: Add Feather M7 1011 board config
2020-02-19 22:08:08 +01:00
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485
...
Addition of RTS/CTS/RS485 capability
2020-02-19 10:35:57 -08:00
fba0b302ff
Add Arduino Nano 33 IoT support
2020-02-19 08:56:06 +01:00
63bcd52a5a
Add Arduino Nano 33 IoT documentation
2020-02-19 08:50:27 +01:00
1f148242db
Merge pull request #2605 from maholli/master
...
New board: PyCubed + updates to SAM32 board
2020-02-18 22:01:41 -05:00
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
f0e5341b0f
Addition of support for imxt1010, 1050 and 1060 families
2020-02-18 23:16:40 +00:00
d388899985
Addition of RS485 support
2020-02-18 23:16:40 +00:00
84ad3d8393
Addition of RTS/CTS/RS485 UART functionality
2020-02-18 23:16:40 +00:00
2b79d8ffe9
adding PWM to board.c for external WDT
2020-02-18 14:16:54 -08:00
2063867899
Merge pull request #2618 from mubes/alignment-warning
...
Fix alignment warning
2020-02-18 13:54:24 -08:00
93760042fa
no current need for NVM
2020-02-16 11:43:19 -08:00
77ad9aff3c
Formatting updates
2020-02-16 00:40:04 +00:00
d13f04f953
Updated formatting
2020-02-14 23:02:02 +00:00
dc97b0d844
correct chec^Cfor flash erase boundaries
2020-02-13 17:41:05 -05:00
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
a0760206c6
Merge pull request #2597 from hierophect/stm32-espruino-wifi
...
STM32: Espruino Wifi
2020-02-13 11:17:59 -08:00
a65ca3ab19
Merge pull request #2617 from dhalbert/nrf-large-spi-transactions
...
use properly-sized SPI transactions
2020-02-12 23:29:29 -05:00
4de2a1eb62
Fix alignment warning
2020-02-12 22:36:34 +00:00
afc1c88046
remove bad define
2020-02-12 15:56:24 -05:00
fd2982f5c9
revert cross-board flag strategy
2020-02-12 15:12:05 -05:00
e00b3269fe
use properly-sized SPI transactions
2020-02-12 15:04:19 -05:00
6d91ed2156
move defaults to avoid conflict
2020-02-12 14:38:27 -05:00
b248486c3b
cleanup flag changes
2020-02-12 14:32:50 -05:00
b7bb85a4da
Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi
2020-02-12 14:31:08 -05:00
7831c475b9
change flag styling
2020-02-12 14:30:29 -05:00
35abc48a65
Merge pull request #2589 from hierophect/stm32-temperature-us
...
STM32: Core temperature and voltage
2020-02-12 10:55:00 -08:00
01507a91db
Merge pull request #2612 from mubes/loadable-binary
...
Add directly loadable binary target for imxrt family
2020-02-12 10:41:59 -08:00
4bc093675c
Merge branch 'master' into stm32-temperature-us
2020-02-12 12:13:56 -05:00
d0870ce484
Update main .bin output file to be bootable artefact
2020-02-12 09:03:11 +00:00
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
f3e4fbd7ba
Add directly loadable binary target
2020-02-11 23:01:08 +00:00
8364c60eb2
Merge pull request #2570 from hierophect/stm32-f407-disco
...
STM32: Add STM32F4Discovery support
2020-02-10 17:19:00 -08:00
c4436910c3
create F407 specific files
2020-02-10 12:44:23 -05:00
80ba4c8661
Merge pull request #2 from adafruit/master
...
merging from upstream
2020-02-10 09:41:16 -08:00
3f700e7e68
fix missing parameter
2020-02-10 12:16:00 -05:00
b4c60c3355
Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi
2020-02-10 11:52:32 -05:00
baf8d9ef5f
Merge remote-tracking branch 'upstream/master' into stm32-temperature-us
2020-02-10 11:45:49 -05:00
3bf4b42e2e
change OH20 badge pin defs to use SWn for buttons
...
Rather than use A, B, C and D
Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
0a54f88751
add pin defs for buttons on the OHS2020 badge
2020-02-10 00:32:16 +01:00
b91c4e66cb
adding Adafruit_CircuitPython_Register to frozen + updating SAM32
2020-02-08 16:09:47 -08:00
84fa0c187e
adding new board - PyCubed
...
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
2020-02-08 15:33:25 -08:00
b93d6e861b
Merge pull request #2596 from hierophect/stm32-espruino-pico
...
STM32: Espruino Pico
2020-02-07 14:14:49 -05:00
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement
...
Monotonic ns improvement; time.sleep rounds to nearest msec
2020-02-07 11:03:37 -08:00
71672fd244
Merge pull request #2599 from ladyada/master
...
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-07 12:59:30 -05:00
b245f9ca5b
Merge pull request #2591 from neubauek/master
...
Added CircuitBrains Basic and Deluxe Boards
2020-02-07 12:47:20 -05:00
005c4caf8c
fix function defs for compiler
2020-02-07 10:32:37 -05:00
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
41b5f73785
revert mixed up linkers
2020-02-06 18:47:06 -05:00
789e311b63
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-06 16:28:02 -05:00
d93d491a61
Cleaned up CircuitBrains Basic and Deluxe board definitions
2020-02-06 14:47:22 -06:00
848577e830
Update PID
2020-02-06 12:55:36 -05:00
aee26b1c79
Add proper PID
2020-02-06 12:25:17 -05:00
4122f85888
Create board definitions, add to board list
2020-02-06 12:19:19 -05:00
383854ac50
Add espruino pico to board list
2020-02-06 11:25:07 -05:00
08cf152aa8
Document flashing process
2020-02-06 11:11:51 -05:00
698ad745f6
Fix oscillator issue, add button and LED pins
2020-02-06 10:49:03 -05:00
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error
...
Add another error message to BLE
2020-02-05 23:39:17 -05:00
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
72a1bdab30
Add another error message for extended advertisements at the same
...
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
cdd1622350
Fix oscillator oversight in clocks.c
2020-02-05 18:12:48 -05:00
e28d244a0d
Add espruino pico pinout
2020-02-05 18:03:54 -05:00
f3188669e4
Added CircuitBrains Basic and Deluxe Boards
2020-02-05 14:52:47 -06:00
788464a594
board uses VBUS
2020-02-05 15:45:27 -05:00
cedf6489f7
Add voltage ADC, standardize mphalport
2020-02-05 12:39:12 -05:00
b6da2fa173
nrf: fix i2c frequency setting
2020-02-05 11:25:31 -05:00
4ba050d46d
Add ADC for temp sensor
2020-02-04 16:26:24 -05:00
65045eb3bc
Merge pull request #2568 from hierophect/stm32-loader-linkers
...
STM32: UF2 build option for STM32F405
2020-02-04 12:21:45 -08:00
6f73126756
add correct PID
2020-02-04 10:46:44 -05:00
c1fded5062
Merge branch 'stm32-loader-linkers' into stm32-f407-disco
2020-02-04 10:40:19 -05:00
3ce6fc89a4
Implement new linker for external flash only
2020-02-04 10:38:45 -05:00
a4ebd2f7c1
allow tuple or list for Palette color
2020-02-03 22:09:53 -05:00
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
5a29b222eb
add bluefruit sense - tested
2020-02-03 13:52:30 -05:00
64cafe82bc
Adjust OHS2020 madctl for default rotation
...
Make to go faster I guess.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
6804b2a7fd
Add I2C pin definitions for interoperability with Adafruit libraries
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
33dcdd7c03
Updates to enable working SPI TFT
...
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.
As fixed the improper SPI bus pins definitions and it works!
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
d99c2ffe4f
QSPI flash fixes
...
We had the pin names swapped on the schematic and a different flash was populated.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
dc964b346c
adjust CLUE madctl so rotation 0 is 'right'
2020-01-31 20:17:39 -05:00
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
fa11912b9b
New configuration values
2020-01-31 17:28:42 -05:00
61944ef08e
Merge branch 'stm32-loader-linkers' into stm32-f407-disco
2020-01-31 16:38:17 -05:00
8258cb851e
Merge pull request #2569 from dhalbert/nrf-increase-connections
...
increase max BLE connections from 2 to 5
2020-01-31 15:59:27 -05:00
4abd5f1f7b
increase max connections from 2 to 5
2020-01-31 14:58:23 -05:00
cabc3aa90e
Merge branch 'stm32-loader-linkers' of https://github.com/hierophect/circuitpython into stm32-loader-linkers
2020-01-31 14:36:03 -05:00
41aefc819b
Fix pyboard
2020-01-31 14:35:54 -05:00
19553b8f7c
WIP
2020-01-31 14:33:10 -05:00
c1cf80180d
Merge branch 'stm32-loader-linkers' into stm32-f407-disco
2020-01-31 14:10:21 -05:00
ab031bc25f
Create basic board profile
2020-01-31 14:04:54 -05:00
f38e12f0ab
Update ports/stm32f4/boards/STM32F405_boot.ld
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-01-31 13:56:08 -05:00
a10e5d1da2
text fixes
2020-01-31 13:17:43 -05:00
7085d91278
dangling edit
2020-01-31 13:13:51 -05:00
b4dcecb266
Add build option for UF2 flash offset
2020-01-31 13:12:58 -05:00
d8016bd52b
Merge branch 'master' into stm32-loader-linkers
2020-01-31 12:21:46 -05:00
3b95d7c16a
add gamepad to specialty cpx builds; update frozen libs
2020-01-30 21:00:47 -05:00
b6358182d3
Update CLUE to Rev C
2020-01-30 15:22:26 -05:00
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf
2020-01-30 10:59:21 -08:00
298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes
...
nrf: track vm_used_ble better
2020-01-30 10:33:19 -08:00
87f73e2729
track vm_used_ble better
2020-01-30 09:52:06 -05:00
5d24ade5c9
Tweak error messages to reduce code size.
2020-01-29 17:32:07 -08:00
1a25d3ca83
fix merge issue
2020-01-29 18:46:14 -05:00
898f4e1f72
Merge branch 'master' into stm32-meowbit
2020-01-29 16:32:08 -05:00
100409961a
Move board_init to main.c
2020-01-29 16:29:43 -05:00
b9bed98538
Merge stm32-meowbit
2020-01-29 16:05:19 -05:00
8a9c3097e3
Add port-specific requested changes
2020-01-29 16:00:38 -05:00
947c2243bd
add feather bootloader settings, cleanup
2020-01-29 15:30:35 -05:00
3c86005546
Implement requested changes
2020-01-28 17:11:25 -05:00
ab9483b7fb
Add internal display definitions, fails at startup
2020-01-28 16:00:34 -05:00
df5e58fc6e
Add support for the Particle Ethernet FeatherWing
2020-01-28 10:53:50 +01:00
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma
...
samd: When possible, use one DMA channel for stereo AudioOut
2020-01-27 14:15:26 -08:00
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev
...
Refine iMX RT memory layout and add three boards
2020-01-27 14:11:08 -08:00
c8f969feb5
samd: audio-dma: avoid memory allocations
...
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations. This was
enough to cause MemoryErrors with regularity.
By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
2020-01-27 08:49:41 -06:00
f2dfcee042
add missing displayref
2020-01-26 20:10:20 -05:00
cb6193bbc7
samd: When possible, use one DMA channel for stereo AudioOut
...
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time. This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half. (the number of bytes transferred
remains the same, though)
In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values. However, this is the
case that matters for stereo mp3 playback on PyGamer.
Testing performed: Listened to some tracks with good stereo separation.
2020-01-26 15:36:24 -06:00
b5b94b72c1
Return to bootloader options
2020-01-24 14:47:13 -05:00
70932cab42
Simplify the flash-display conflict fix
2020-01-24 14:33:28 -05:00
2afca4e942
Fix flash-display conflict error
2020-01-24 14:25:36 -05:00
6f13979c9b
pygamer and pybadge boards were not resetting neopixels
2020-01-24 09:32:28 -05:00
68f9aee992
reset NeoPixels on CPB on soft reload
2020-01-23 20:16:31 -05:00
d8bc57c1dc
Flash and display control
2020-01-23 17:17:02 -05:00
fe70072d68
Merge branch 'master' into ndbit6
2020-01-23 12:32:19 -05:00
4675783545
change-name-to-ndgarage_ndbit6
2020-01-23 09:55:17 -07:00
41a85b71fc
init nfc copy
2020-01-22 20:30:33 -06:00
e9f9cee4d6
Invert duty cycle intensity
2020-01-22 18:47:41 -05:00
36792926d2
Revert dangling pointer issue in PWMOut
2020-01-22 14:41:37 -05:00
b326ee0a3d
fix microcontroller pin ommission
2020-01-22 12:12:27 -05:00
085242bf5c
Use new USB PIDs that aren't used yet.
2020-01-21 18:45:00 -08:00
87344ff53a
Disable the DCache when USB is initialized. There are still issues enabling it.
2020-01-21 18:32:19 -08:00
4923caf85e
Increase CPX stack size by 256
2020-01-21 18:53:55 -05:00
97420994e8
Merge remote-tracking branch 'origin/master' into capablerobot-usbhub
2020-01-20 13:11:57 -05:00
1c39606345
Fix other builds missing new heap bounds functions
2020-01-18 18:06:56 -08:00
9d5742ebd1
Fix start on power up by providing Reset_Handler ourselves.
...
On power up the FlexRAM banks are in an unknown config so we can't
rely on the stack until after we configure FlexRAM.
2020-01-18 11:54:01 -08:00
9f4ea2122a
teensy fixes
2020-01-17 18:35:09 -08:00
7d8dac9211
Refine iMX RT memory layout and add three boards
...
Introduces a way to place CircuitPython code and data into
tightly coupled memory (TCM) which is accessible by the CPU in a
single cycle. It also frees up room in the corresponding cache for
intermittent data. Loading from external flash is slow!
The data cache is also now enabled.
Adds support for the iMX RT 1021 chip. Adds three new boards:
* iMX RT 1020 EVK
* iMX RT 1060 EVK
* Teensy 4.0
Related to #2492 , #2472 and #2477 . Fixes #2475 .
2020-01-17 17:36:08 -08:00
3f43155b63
Meowbit bus conflict WIP
2020-01-17 13:31:12 -05:00
69785cccfe
mimxrt1011: Fix pin definition
2020-01-17 14:45:29 +01:00
cc77e86408
Update the VID and USB company string
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 15:43:49 -08:00
cc03d68984
Fix backlight pin registration
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 14:53:07 -08:00
86d454adf3
Initial board support for OHS2020 Badge
...
Not tested but builds.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 13:46:56 -08:00
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm
...
nrf: Add bonding to BLE pairing support
2020-01-15 16:11:09 -08:00
765a54afb5
Merge pull request #2525 from aramcon-badge/badge_2019_upstream
...
Add board definition files for AramCon Badge 2019
2020-01-15 18:29:36 -05:00
4bf10a75c7
Add board definition files for AramCon Badge 2019
2020-01-16 00:44:18 +02:00
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed
...
CircuitPython support for the Open Book
2020-01-15 17:21:19 -05:00
85dc4089b9
address review comments
2020-01-14 17:23:16 -05:00
d6e657b593
Initial commit.
2020-01-14 16:51:27 -05:00
eb481c9247
add support for the Open Book
2020-01-14 16:34:46 -05:00
1070f2c853
Merge remote-tracking branch 'upstream/master' into stm32-meowbit
2020-01-14 16:11:59 -05:00
05093f7f54
Fix VTOR relocate, add bootloader makefile handling
2020-01-14 15:50:00 -05:00
7775513a5b
Merge pull request #2463 from hierophect/stm32-i2c-rework
...
STM32: I2C fix & general busio cleanup
2020-01-14 15:06:31 -05:00
b5df5ce1ce
Merge pull request #2507 from kamtom480/circuitpython-mkspk
...
Add mkspk source files
2020-01-14 12:05:36 -08:00
5aae8df5d7
style changes, fix i2c typo
2020-01-14 13:30:16 -05:00
c0dacba80f
remove comment confusing py tools
2020-01-14 13:06:10 -05:00
50e718be99
second revision to line breaks for visibility per dhalbert
2020-01-13 22:13:39 -05:00
18957786f2
inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert
2020-01-13 22:00:42 -05:00
c735289ddf
Added Dxx names to analog pins on Feather M4 Express pins.c file
2020-01-13 21:19:17 -05:00
0367ba7495
fix some typos and leftovers
2020-01-13 18:29:34 -05:00
2a75196aa3
merge from adafruit/circuitpython
2020-01-13 18:15:32 -05:00
4ad004f24e
put bonding to-do flags into Connection objects instead of using a heap-allocated queue
2020-01-13 17:52:32 -05:00
de2379bc30
minor WIP debug edits
2020-01-13 17:24:52 -05:00
2eb26a6d0b
Merge pull request #2457 from hierophect/stm32-cpython-compat
...
STM32: Cpython compatibility flag 2
2020-01-13 13:47:55 -08:00
402f6f66bd
Add mkspk source files
2020-01-13 07:53:24 +01:00
9e7f8743c2
fix CCCD bonding store; avoid excessive bonding writes
2020-01-12 23:32:51 -05:00
346ce3b73b
wip: HID bonding works!
2020-01-10 23:55:45 -05:00
6ea1785457
Merge pull request #2501 from kamtom480/timerhook
...
Fix board_timerhook
2020-01-10 11:57:54 -08:00
6ea8d8a6c2
Merge pull request #2498 from dhalbert/optional-i2c-pullup-checking
...
Make requiring I2C pullups be optional
2020-01-10 11:42:44 -08:00
8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults
...
Urandom hardfaults
2020-01-10 11:37:59 -08:00
1544d60000
working control
2020-01-10 13:09:14 -05:00
1229de4499
attempt to get control going again
2020-01-10 12:56:22 -05:00
360c876be4
add flag to i.mx port
2020-01-10 09:20:21 -05:00
357506dd9a
Fix board_timerhook
2020-01-10 13:59:52 +01:00
9c167af17a
wip; redid flash writing to be compatible with SD
2020-01-09 17:40:02 -05:00
189f2d5f07
Make requiring I2C pullups be optional
2020-01-09 17:31:50 -05:00
4ec588bb37
spacing changes and text fix
2020-01-09 16:17:57 -05:00
e509115630
Merge branch 'master' into stm32-i2c-rework
2020-01-09 16:01:31 -05:00
d7c6d9cabd
Merge pull request #2459 from hierophect/stm32-spi-oneline
...
STM32: Allow simplex SPI
2020-01-09 10:03:44 -06:00
1c6efb9e66
os.urandom: remove unneeded sleep
2020-01-08 16:48:17 -06:00
10eed78dd8
use CFLAG to properly set define
2020-01-08 17:37:20 -05:00
b74e78d2c0
Merge remote-tracking branch 'upstream/master' into stm32-cpython-compat
2020-01-08 17:11:50 -05:00
270f0dfc7c
text fix
2020-01-08 15:58:20 -05:00
ae22305869
Corrections to I2C, style
2020-01-08 15:55:53 -05:00
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes
...
Fixes for JEplayer
2020-01-08 12:50:13 -08:00
a9633a3c94
Reorganize I2C workaround, style changes
2020-01-08 15:33:35 -05:00
1caf6bd8d3
add missing .h file
2020-01-08 15:23:38 -05:00
e1c1e32ceb
address code review
2020-01-08 15:17:54 -05:00
4e040b0152
add reset of heap to board reset for nrf port
2020-01-08 15:15:27 -05:00
34c9e00f08
try (re)using the buffer in neopixel_write
2020-01-08 15:14:53 -05:00
7a94940c89
Replace magic number and add comment.
2020-01-08 11:01:43 -08:00
d4492aaed0
Merge remote-tracking branch 'adafruit/master' into packet_buffer
2020-01-08 10:44:37 -08:00
d222c64538
Merge branch 'stm32-spi-oneline' into stm32-i2c-rework
2020-01-08 13:03:38 -05:00
90613aa5fb
more cleanup and style syncing
2020-01-08 13:03:25 -05:00
b0f08ba465
Close algorithm edge case to match SPI
2020-01-08 12:32:43 -05:00
b3fb024301
nrf: Call into sd as many times as necessary to fill urandom request
...
Generating 51200 bytes in one go takes 4.966s, so that's a rate of about
10KiB/s.
2020-01-08 10:06:55 -06:00
3d5528b88f
style edits
2020-01-08 10:53:53 -05:00
8d629a957d
Merge pull request #2367 from iot49/mtime
...
fix mtime on file creation
2020-01-07 17:19:40 -05:00
817c4af60c
Merge pull request #2456 from arturo182/mimxrt10xx
...
Add initial MIMXRT10XX port implementation
2020-01-07 13:58:09 -08:00
cc7b57c8d4
mimxrt10xx: Add license for NXP code
2020-01-07 22:07:27 +01:00
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2
...
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
2020-01-07 12:08:59 -08:00
19803c664f
mimxrt10xx: Add info on clock config source
2020-01-07 20:05:57 +01:00
d645ea222d
Text fixes for consistency
2020-01-07 13:25:24 -05:00
6ab75fe8c5
Allow MOSI/MISO exclusion
2020-01-07 13:19:00 -05:00
ff6d9d8a52
mimxrt10xx: Use the correct error for not implemented functionality
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-01-07 09:29:47 +01:00
b778aee21d
Make inclusion non-conditional
2020-01-06 17:08:52 -05:00
0bbeae1786
WIP edits
2020-01-06 15:37:37 -05:00
13e0cba6f1
Add initial MIMXRT10XX port
2020-01-06 21:08:49 +01:00
fff5f8eb65
Merge remote-tracking branch 'upstream/master' into stm32-meowbit
2020-01-06 11:31:25 -05:00
7198cc8ed6
Changes to UF2 settings, reboot working, no usb
2020-01-06 11:30:23 -05:00
59ded1131f
Take display offsets for PewPew M4 from the bootloader config
...
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
2020-01-06 14:24:30 +01:00
390337b9a5
wip; compiles
2020-01-05 23:33:42 -05:00
f355642eab
Boot linker edits
2020-01-04 16:29:31 -05:00
d0fab1c728
Clean up debugging edits
2020-01-04 13:53:31 -05:00
36088becc9
PWM Fix, plus debugging
2020-01-04 13:35:53 -05:00
3ad3d49959
changes only for monster m4sk
2020-01-04 12:32:49 -05:00
82fb761c0f
Add PacketBuffer and MTU negotiation support.
...
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.
This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
776c9b011c
Merge pull request #2432 from tannewt/fix_nrf_uart
...
Fix nRF UART reset
2020-01-03 16:57:59 -08:00
f6ec1ea172
Throw an error when we cannot allocate PWM pixel buffer
2020-01-03 15:15:36 -08:00
6afb8dadbc
Change SPI and I2C in the same way.
2020-01-03 15:14:37 -08:00
242d572470
wip
2020-01-03 10:24:07 -05:00
bd8650d35b
samd/peripherals: take upstream update
2020-01-02 17:55:50 -06:00
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update
...
Update the PewPew M4 board and circuitpython-stage
2020-01-01 13:59:02 -05:00
c7d68fc3bc
Merge pull request #2440 from adafruit/tannewt-hwm4-uart-pins
...
Fix Hallowing M4 Express UART pin mapping
2019-12-30 23:45:14 -05:00
f0d34da556
add display support; rotation 270
2019-12-30 17:39:39 -05:00
3f9ebd2fed
initial CLUE board defn
2019-12-30 17:10:42 -05:00
28b1d718a3
Tests for PWM issues, style changes
2019-12-30 15:15:55 -05:00
0223589e6c
Fix default UART too
2019-12-30 11:34:51 -08:00
e1d026f815
Update pins.c
2019-12-30 11:33:04 -08:00
264abd4741
Merge pull request #2428 from hathach/samd-improve-usb
...
improve usb dcd samd51
2019-12-30 13:39:17 -05:00
e9dbc34d80
add cypthon compat setting
2019-12-30 11:35:02 -05:00
5b9209aa02
Merge remote-tracking branch 'upstream/master' into stm32-meowbit
2019-12-30 11:17:12 -05:00
cfd71d9023
Fix nRF UART reset
...
disable only turns off ENABLE but doesn't set the init tracking that
nrfx uses. uninit hangs if ENABLE is off and is called because it
waits forever for TX to stop.
2019-12-27 20:18:07 -08:00
62c4028cde
sync with https://github.com/hathach/tinyusb/pull/246
...
should fix slow enumeration
2019-12-26 23:04:16 +07:00
d38a0007f1
define board.VOLTAGE_MONITOR for feather_stm32f405_express
2019-12-26 08:46:27 -05:00
5aa3e3eabb
samd/peripherals: update
2019-12-24 09:36:19 -06:00
b49ecc52b9
text fixes
2019-12-23 14:55:26 -05:00
b06057395b
Update PewPew M4
...
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
2019-12-23 18:37:36 +01:00
21cbd5ce96
Merge pull request #2379 from hierophect/update-tusb
...
Update Tinyusb
2019-12-23 17:58:26 +07:00
f60b6481e0
Turn off `gamepad` on cpx crickit
2019-12-20 12:14:27 -08:00
b859e2b710
Remove `re` from CPX Displayio build to make space.
2019-12-20 11:43:56 -08:00
f08c7d470d
Merge pull request #2410 from jepler/nrf-extended-samplerate
...
nrf: PWMAudioOut: 62500Hz limitation is not needed
2019-12-20 09:31:02 -08:00
d31a387ace
circuitplayground_express_displayio: reduce inlining to make .ko translation fit
2019-12-19 16:11:29 -06:00
51af8aadb7
nrf: PWMAudioOut: 62500Hz limitation is not needed
...
.. and it gets in the way of some example programs, due to the way
circuitplayground library generates different frequency sine waves
2019-12-19 10:34:56 -06:00
16688180c6
add-ndbit6
2019-12-19 07:17:43 -07:00
902e242237
Revert "enable internal SPI intercepts. can brick USB"
...
This reverts commit 5b70fa0a64
2019-12-18 17:17:06 -05:00
5b70fa0a64
enable internal SPI intercepts. can brick USB
2019-12-18 15:40:08 -05:00
3a5de7effd
Remove merge overflow
2019-12-18 14:46:12 -05:00
d1f045880d
Merge branch 'master' into hierophect-update-tusb
2019-12-18 16:52:04 +07:00
25df6e613a
Merge pull request #2395 from hathach/nrfx-v2
...
upgrade nrfx API to v2
2019-12-18 16:14:25 +07:00
dad2663337
update nrfx submodule to v2
2019-12-18 15:39:11 +07:00
e9cb47ffbd
Merge pull request #2393 from dhalbert/increase-cpx-stack
...
Increase CPX stack size slightly
2019-12-17 14:35:37 -08:00
ba19cd9ecb
Internal filesystem displayIO test
2019-12-17 17:33:49 -05:00
f136ef2b91
add most remaining pindefs
2019-12-17 14:00:35 -05:00
4bfb255a1c
merge Thach's suggestion
2019-12-17 12:58:16 -05:00
8137ac4c49
nRF: PWMAudioOut: handle non-looping rawsamples
2019-12-17 08:59:08 -06:00
894cad2e17
upgrade nrfx API to v2
2019-12-17 21:39:52 +07:00
ebc21144b8
stm32 explicitily enable/disable vbus sense, fix warning
2019-12-17 10:55:19 +07:00
81581b345c
Increase CPX stack size slightly
2019-12-16 17:25:22 -05:00
03ea9ff66e
reset atmel-samd submodule to correct commit
2019-12-16 16:31:44 -05:00
822828b9a4
Merge pull request #6 from adafruit/master
...
Pull master
2019-12-16 15:06:58 -05:00
2abccc1745
update vid and pid for teknikio_bluebird
2019-12-16 08:58:56 -05:00
89ed64157d
Merge branch 'master' into master
2019-12-16 13:25:44 +05:00
87dc9bee8b
Update mpconfigboard.mk
2019-12-16 12:25:51 +05:00
6f6d6c01ab
Update mpconfigboard.mk
2019-12-16 12:18:16 +05:00
32744a04e1
update bluebird make file
2019-12-13 09:08:21 -05:00
3992a870e5
Merge branch 'master' into teknikio/bluebird
2019-12-13 08:55:15 -05:00
4bee6536c9
updates to bluebird
2019-12-13 08:52:03 -05:00
b484c89b73
Merge pull request #4 from adafruit/master
...
Pull master
2019-12-13 08:51:06 -05:00
99c02b5afb
usb not working...
2019-12-12 17:53:04 -05:00
e4fb414b91
clean up definitions post merge
2019-12-12 17:17:29 -05:00
ab3762d8f5
Merge branch 'dumb-git-stuff' into stm32-meowbit
2019-12-12 16:34:11 -05:00
7e0719117b
Revert "remove F401 additions to streamline"
...
This reverts commit 12737e2821
2019-12-12 16:32:33 -05:00
2be18a7b53
revert dumb thing
2019-12-12 16:30:24 -05:00
842f8b2d3d
Revert "Remove meowbit for now"
...
This reverts commit 006182f4e8
2019-12-12 16:27:32 -05:00
ef2ef7a6b8
merge from master
2019-12-12 15:51:13 -05:00
e11fabd5e0
moved nrf internal filesystem to just below bootloader
2019-12-12 14:57:23 -05:00
7889b999cc
Fix flash write error handling; clean up safe mode message printing
2019-12-12 14:41:49 -05:00
9339903a30
Revert "delete old boards"
...
This reverts commit 00e953e86c
2019-12-12 13:24:46 -05:00
d44a758a2d
Add no VBUS option to blackpill
2019-12-12 12:48:37 -05:00
39f3063ed4
Merge remote-tracking branch 'upstream/master' into update-tusb
2019-12-12 12:47:48 -05:00
885a1415d0
Update stm32 usb.c
2019-12-12 12:47:40 -05:00
dde7c5e145
Merge branch 'master' of https://github.com/Teknikio/circuitpython
2019-12-12 08:59:37 -05:00
bf4138b0e4
Merge pull request #3 from adafruit/master
...
Pull master
2019-12-12 08:59:22 -05:00
fd03fd5e4f
sd_flash_operation_status should be volatile
2019-12-12 00:19:03 -05:00
8176325130
Merge remote-tracking branch 'adafruit/master' into ld-cleanup
2019-12-11 22:52:59 -05:00
70d899d354
WIP to successful USB test
2019-12-11 17:58:21 -05:00
ae64a669dd
address review comments
2019-12-11 15:43:06 -05:00
0da5dceccf
update bluebird makefile
2019-12-11 15:25:16 -05:00
a273a7c55e
add remaining peripheral pin maps and digital/analog pin definitions
2019-12-11 15:23:16 -05:00
006d85d5c2
add make file and board configuration, add accelerometer pin mappings
2019-12-11 14:49:59 -05:00
e5adf3c43f
Merge pull request #2361 from hierophect/stm32-blackpill
...
STM32: Blackpill Support
2019-12-11 11:07:23 -08:00
1e11f2708b
remove debugging leftovers
2019-12-11 09:34:56 -05:00
73b6e5d8e6
added correct include files
2019-12-10 19:44:11 -08:00
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
30aba46735
Merge branch 'master' into stm32-blackpill
2019-12-10 15:38:42 -05:00
33233934e9
text fix
2019-12-10 15:13:11 -05:00
0e2a03e3bd
revert usb.c additions
2019-12-10 15:07:39 -05:00
a08d9e6d8e
audiocore: Add MP3File using Adafruit_MP3 library
2019-12-10 14:03:06 -06:00
a484a93b29
nRF: disk_read must be 4-byte aligned
...
.. a requirement that oofatfs needs to be taught to respect.
This problem can be demonstrated with the following snippet, except
that the related file ("test.bin") must also be contiguous on the
filesystem. You can ensure this by reformatting your device's filesystem
before testing, then copying any single file bigger than 4kB to test.bin.
f = open("test.bin", "rb")
f.seek(2048)
b = bytearray(2048)
v = memoryview(b)
f.readinto(v[909:])
Closes : #2332
2019-12-10 14:03:06 -06:00
e328e9c106
minor text changes
2019-12-10 15:02:38 -05:00
387ab6c87e
Merge pull request #2315 from hierophect/stm32-pyb-nano
...
STM32: Add PYB Nano support
2019-12-10 11:25:07 -08:00
dda9ea09b1
Merge pull request #2363 from jepler/samd-neopixel
...
samd: neopixel: Fix neopixels after #2297
2019-12-10 11:23:18 -08:00
8497ea8aab
Merge pull request #2365 from dhalbert/cpb-power-switch
...
Add POWER_SWITCH pin to CPB
2019-12-10 10:53:45 -08:00
dbc28e35c5
Merge pull request #2 from adafruit/master
...
Pull master
2019-12-10 11:50:49 -05:00
0712c95225
fix mtime on file creation
2019-12-09 23:14:26 -08:00
60f399395a
Add POWER_SWITCH pin to CPB
2019-12-09 18:30:24 -05:00
19ac8aea8c
Merge pull request #2353 from jepler/audiosample-protocol
...
Convert audiosamples to use micropython "protocols" (safely)
2019-12-09 14:50:16 -08:00
b0a5e81c46
Merge remote-tracking branch 'upstream/master' into stm32-meowbit
2019-12-09 12:29:00 -05:00
00e953e86c
delete old boards
2019-12-09 12:28:25 -05:00
13620cc4db
nRF: PWMAudioOut: fix half-speed playback of stereo samples
...
The "spacing" of "buffer structure" is confusing, use the "channel count"
instead.
Testing performed on nrf52840 feather:
Play stereo and mono, 8- and 16-bit, 8kHz RawSamples representing 333.33Hz
square waves.
Use both mono and stereo PWMAudioOut instances.
Scope the RC-filtered signal and use the scope's frequency
measurement function, verify the frequency is 333 or 334Hz in all tested
cases.
In the "stereo output" cases, verify both the L and R channels. Verify
the output amplitude is the same in both channels.
In the "stereo output" cases, run a second test where the L channel's
amplitude is attenuated 50%. Verify the output amplitude is correct
in each channel.
2019-12-09 10:57:55 -06:00
1905d0746d
samd: neopixel: Fix neopixels after #2297
...
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.
This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)
Testing performed on a Metro M4:
* measured timings using o'scope and found all values within
datasheet tolerance.
* Drove a string of 96 neopixels without visible glitches
* on-board neopixel worked
Testing performed on a Circuit Playground Express (M0):
* Color wheel code works on built-in neopixels
* Color wheel code works on 96 neopixel strip
As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)
Closes : #2297
2019-12-07 19:19:45 -06:00
f5e913101c
Merge pull request #2301 from tannewt/support_extended_advertising
...
Add support for extended (>31 byte) BLE advertisements.
2019-12-06 23:51:05 -05:00
da0ea979ff
Check connection validity after service discovery.
...
Fixes #2347
2019-12-06 16:03:14 -08:00
dd4d3a662d
conditional for F412 register difference
2019-12-06 16:44:17 -05:00
252da17bc9
Create VBUS disable interface in shared supervisor
2019-12-06 15:55:00 -05:00
559ce6a949
Merge pull request #2356 from tannewt/central_pairing
...
Add connection interval and debugging
2019-12-06 15:19:40 -05:00
d628d2a261
atmel-samd working
2019-12-06 15:18:20 -05:00
840f88b8f0
Merge pull request #2350 from hierophect/stm32-neopixel-fix
...
Fix for neopixels on <100MHz STM32 boards
2019-12-06 10:40:50 -08:00
6c8503b3c6
VBUS fix actually doesn't work
2019-12-06 12:39:22 -05:00
2a01f0806e
text fixes
2019-12-06 11:58:26 -05:00
0ae08e275d
remove pyb nano folder
2019-12-06 11:54:01 -05:00
f6d0e912c9
remove old 401 files
2019-12-06 11:52:40 -05:00
2dcfc9d411
USB fixes and cleanup
2019-12-06 11:41:38 -05:00
a0721fc94a
Merge remote-tracking branch 'adafruit/master' into ld-cleanup
2019-12-05 22:46:38 -05:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
9b43d5ced4
Merge remote-tracking branch 'upstream/master' into stm32-blackpill
2019-12-05 14:25:39 -05:00
c53496a55e
remove redundant NOPs
2019-12-05 12:45:09 -05:00
f3f2c7f5de
change default phase for SPI
2019-12-05 11:38:20 -05:00
17c8356b8c
Add connection interval and debugging
...
This also sets TinyUSB to master and to not include its submodules.
It also fixes an old displayio example comment and retries gattc
reads.
2019-12-04 14:39:02 -08:00
19dc219ff7
Merge pull request #2351 from hierophect/stm32-i2c-never-reset
...
STM32: Add I2C never reset
2019-12-04 10:26:51 -08:00
3de1b9edbe
Merge remote-tracking branch 'upstream/master' into stm32-displayio
2019-12-04 10:50:14 -05:00
238e121236
protocols: Allow them to be (optionally) type-safe
...
Protocols are nice, but there is no way for C code to verify whether
a type's "protocol" structure actually implements some particular
protocol. As a result, you can pass an object that implements the
"vfs" protocol to one that expects the "stream" protocol, and the
opposite of awesomeness ensues.
This patch adds an OPTIONAL (but enabled by default) protocol identifier
as the first member of any protocol structure. This identifier is
simply a unique QSTR chosen by the protocol designer and used by each
protocol implementer. When checking for protocol support, instead of
just checking whether the object's type has a non-NULL protocol field,
use `mp_proto_get` which implements the protocol check when possible.
The existing protocols are now named:
protocol_framebuf
protocol_i2c
protocol_pin
protocol_stream
protocol_spi
protocol_vfs
(most of these are unused in CP and are just inherited from MP; vfs and
stream are definitely used though)
I did not find any crashing examples, but here's one to give a flavor of what
is improved, using `micropython_coverage`. Before the change,
the vfs "ioctl" protocol is invoked, and the result is not intelligible
as json (but it could have resulted in a hard fault, potentially):
>>> import uos, ujson
>>> u = uos.VfsPosix('/tmp')
>>> ujson.load(u)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: syntax error in JSON
After the change, the vfs object is correctly detected as not supporting
the stream protocol:
>>> ujson.load(p)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OSError: stream operation not supported
2019-12-04 09:29:57 -06:00
e6b45656f9
Add module and empty parallelbus
2019-12-03 17:18:42 -05:00
012b3bdf18
Add I2C never reset, SPI bugfix
2019-12-03 16:18:49 -05:00
45a6b03d40
copy from busted branch
2019-12-03 15:30:12 -05:00
fce81e6868
Merge pull request #2297 from jepler/tick-refactor
...
Call background tasks only once per ms
2019-12-02 16:45:51 -08:00
12737e2821
remove F401 additions to streamline
2019-12-02 12:28:48 -05:00
002f5c0f1c
samd: trinket_m0: make board fit again
2019-12-02 08:25:48 -06:00
899202aca7
Merge branch 'master' into gcc9
2019-12-02 07:27:03 -06:00
95d9c49e43
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-29 11:27:09 -06:00
d843156a5e
samd: Consolidate small build optimization flags
...
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
2019-11-29 10:51:16 -06:00
dd6dfeb30a
Squeeze pyruler zh_Latn_pinyin
2019-11-27 14:47:35 -05:00
b32a9192df
make UART.write be blocking on SAMD; add timeout property
2019-11-27 13:05:29 -05:00
3fc58cee38
Merge remote-tracking branch 'adafruit/master' into support_extended_advertising
2019-11-26 13:12:43 -08:00
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master
...
Add shIRtty board
2019-11-26 15:23:56 -05:00
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name
...
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 15:17:14 -05:00
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 10:59:12 -08:00
2647ea0754
fix: disable touchio to save some space
2019-11-26 19:26:18 +01:00
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space
...
Once we use PixelBuf, the library will be much smaller.
2019-11-26 09:31:44 -08:00
82f55dc046
atmel-samd: reduce inlining on constrained boards again
...
pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0
now has just 76 bytes flash available.
2019-11-26 08:50:55 -06:00
3ed6de7baf
atmel-samd: reduce inlining on pyruler again
...
By tweaking the optimizer flags further, this build also fits
2019-11-26 08:50:55 -06:00
2e4a6b94e7
atmel-samd: get most constrained m0 builds to work again
...
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
2019-11-26 08:50:45 -06:00
e5dd78d393
Merge pull request #2324 from jepler/nrf-i2s-channels-widths
...
nrf: assign channel width and count correctly
2019-11-25 16:59:08 -08:00
2653455ded
Merge pull request #2321 from jepler/nrf-i2s-buglets
...
Nrf i2s buglets
2019-11-25 16:11:43 -08:00
11dc572bce
feature: our own PID - thanks @ladyada
2019-11-25 21:56:42 +01:00
1ee35fd6fd
nrf: i2sout: move register settings closer together
...
.. just for consistency's sake
2019-11-25 11:43:51 -06:00
47a6eaa297
nrf: i2sout: Assign SWIDTH
...
The sample width register was never set, so all samples were played
as though they were 16 bit.
After this change, 8-bit samples no longer produce audio on the MAX 98357A
BOB, because only 16-, 24-, and 32-bit samples are supported by the
hardware. This will be addressed by a future change to pad samples to
16 bits; see #2323 and the 98357A datasheet page 6.
2019-11-25 11:43:29 -06:00
8f4bab2d24
i2sout: Correctly retrieve channel_count
...
The meaning of the "single channel" parameter is not well-documented,
but in fact it seems that "true" must be passed or else the returned
channel_count is always 1. This caused stereo samples to be played
incorrectly.
2019-11-25 10:59:59 -06:00
fc71ed9789
add shirtty board - hackaday supercon 2019 addon
2019-11-25 17:44:41 +01:00
d154d11911
Merge pull request #2320 from jepler/nrf-unsigned-audio-crash
...
nrf: i2sout: Fix double-increment when copying samples
2019-11-25 11:42:16 -05:00
c9946dfd63
nrf: i2sout: Use <, not !=, for loop condition
...
This is good C style, h/t @danh
2019-11-25 09:35:57 -06:00
19d122e546
nrf: i2sout: Fix double-increment when copying samples
...
This caused two problems when playing unsigned samples:
* When an even number of samples were present, it "worked" but only
every other sample was copied into the output, changing the waveform
* When an odd number of samples were present, the copy continued beyond
the end of the buffers and caused a hard fault
2019-11-25 09:07:20 -06:00
1ccb7b4c5e
cosmetic commit, mostly to re-run
2019-11-22 16:30:10 -05:00
13375d16f1
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk
2019-11-22 15:44:51 -05:00
bfdfe0e681
stm32: fix uses of ticks_ms global
2019-11-22 14:30:08 -06:00
77b78d7fb9
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-22 14:28:51 -06:00
1c6c9a3e1f
nrf: i2sout: Ensure hardware I2S is stopped at deinit
...
.. otherwise, it may be possible under some scenario, for the background
task to continue and overwrite unrelated memory.
2019-11-22 14:15:07 -06:00
e18d3e0f76
Merge branch 'master' into m4-network-ps2io
2019-11-22 15:02:52 -05:00
aabb56c840
nrf: i2sout: Only update hold_value when appropriate
...
If we put no samples into the buffer, then there is no last
sample to fill out hold_value with. (and, in fact, the expression such
as *(uint32_t*)(buffer-4) is outside an allocated region)
Detect this condition, and leave the prior value in place.
This improves clicks heard when pausing and resuming a waveform.
2019-11-22 13:54:37 -06:00
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
352bd95f5a
remove blackpill
2019-11-22 11:19:39 -05:00
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
0d8eb3cfb4
add correct VID/PID pairs
2019-11-22 10:54:35 -05:00
6a7c8d6341
minor fix
2019-11-21 20:56:05 -05:00
743bc829ab
Clean up debug changes
2019-11-21 16:39:57 -08:00
e63796c7bc
Special exception message for when pairing prompt is ignored.
2019-11-21 16:32:42 -08:00
39f4046f70
Fix pairing when peripheral. Central untested.
2019-11-21 16:32:42 -08:00
b5ff9684bb
remove misplaced status LED definitions
2019-11-21 17:09:28 -05:00
4e4ecafd97
Add definitions for PYB Nano and blackpill
2019-11-21 16:53:06 -05:00
2adecda5eb
Merge pull request #2311 from tannewt/redo_bleio_errors
...
Use BluetoothError in _bleio
2019-11-21 16:44:26 -05:00
e06dc72359
Merge pull request #2307 from hierophect/stm32-spi-cleanup
...
STM32: SPI clock rate fix and cleanup
2019-11-21 16:12:06 -05:00
a96317d566
requested style changes
2019-11-21 14:30:07 -05:00
13d786b2ef
added pin defs
2019-11-21 14:27:59 -05:00
5e857fdb67
Use BluetoothError in _bleio
...
This better differentiates errors than using OSError everywhere.
2019-11-20 14:02:15 -08:00
006182f4e8
Remove meowbit for now
2019-11-20 15:56:00 -05:00
d8d95d9998
Minor meowbit changes
2019-11-20 15:55:13 -05:00
cf4a3237e7
Merge remote-tracking branch 'upstream/master' into stm32-meowbit-etc
2019-11-20 15:31:55 -05:00
9764006f81
add F401 pin definition
2019-11-20 15:30:31 -05:00
3d1b6d9fc8
fix typo
2019-11-20 12:07:12 -05:00
bd9893ab98
clean up SPI module readability
2019-11-20 12:00:45 -05:00
0b558e8714
fix error in SPI busclock selection
2019-11-20 11:34:49 -05:00
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
11c2c3443f
Add support for extended (>31 byte) BLE advertisements.
2019-11-19 13:55:58 -08:00
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
1a22d8a0f2
Merge pull request #2291 from hierophect/stm32-neopixel
...
STM32: Neopixel support
2019-11-18 23:45:09 -05:00
4a25c2344e
implement os urandom
2019-11-18 18:27:25 -05:00
256abf5505
Add board folders
2019-11-18 16:13:27 -05:00
a4797327cd
add microcontroller toggles for status LED
2019-11-18 13:51:59 -05:00
40a47d41df
samd: background: Allow monitoring time taken in background task
...
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
2019-11-18 11:01:24 -06:00
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
51078cc38f
timing tweaks with testing
2019-11-15 17:17:05 -05:00
98fd372d5b
Add missing define
2019-11-15 13:19:37 -05:00
ee1559b921
Merge branch 'pin-commonhal-additions' into stm32-neopixel
2019-11-15 13:09:59 -05:00
81223c76bd
revert error
2019-11-15 13:04:25 -05:00
5f290d091e
Merge branch 'pin-commonhal-additions' into stm32-neopixel
2019-11-15 13:00:11 -05:00
2c6781f74d
move neopixel_in_use flag to shared-bindings
2019-11-15 12:59:52 -05:00
e1579a1cc5
Merge branch 'pin-commonhal-additions' into stm32-neopixel
2019-11-15 12:47:23 -05:00
de5691acf5
Add never_reset and reset to pin common hal, adjust files
2019-11-15 12:47:00 -05:00
6cce2d6d14
Implement Neopixel write, add defaults to f405
2019-11-15 12:28:16 -05:00
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
6e96b1945e
Raise clock speed, adjust divisors
2019-11-13 13:18:43 -05:00
166518fc9b
Merge pull request #2272 from hierophect/stm32-microcontroller-fillout
...
STM32: add us delay
2019-11-12 18:03:55 -05:00
e40bd07fcf
fix conflicting definitions on discovery boards
2019-11-12 13:03:13 -05:00
bbc366b85b
Style overhaul, extra error checks
2019-11-12 11:26:14 -05:00
ed3e377390
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-11-12 09:49:17 -05:00
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
14b70806a5
de-init check
2019-11-11 15:47:47 -05:00
e076f14ea3
text fixes
2019-11-11 15:32:47 -05:00
c38086fc4a
fix typo
2019-11-11 15:04:22 -05:00
3f8b4727f5
Revise us delay to include interrupt/non-interrupt versions
2019-11-11 14:58:45 -05:00
91156670e9
Merge pull request #2271 from theacodes/enable-micropython-native
...
Allow boards to enable the `micropython.native` decorator
2019-11-08 13:42:17 -05:00
d42c4b082d
revert sublime being a dumb
2019-11-06 14:55:16 -05:00
39dbcb529a
revert git being a dumb
2019-11-06 14:54:07 -05:00
adfef8b520
Merge remote-tracking branch 'upstream/master' into stm32-dac-deinit
2019-11-06 14:46:56 -05:00
b8373aca0c
Merge pull request #2266 from hierophect/stm32-defaults
...
STM32: Add board defaults
2019-11-06 14:29:29 -05:00
c7195c4bc5
Allow boards to enable the `micropython.native` decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
e66fcb5e1f
add missing newline
2019-11-05 16:32:34 -05:00
8a098c154d
Fix unsaved file
2019-11-05 16:25:30 -05:00
1a7060af25
Add us delay
2019-11-05 16:23:59 -05:00
ba83a4a2ac
Merge pull request #1 from adafruit/master
...
Update base
2019-11-05 11:06:18 -05:00
0b85c4bb20
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-11-05 10:56:57 -05:00
8ab3ef44dd
add bluebird template files
2019-11-05 10:52:25 -05:00
dfe73a063d
Fix error that would carry past python exception
2019-11-05 10:50:57 -05:00
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
...
Refine _bleio
2019-11-04 22:27:54 -05:00
c87d6cc6a5
Merge pull request #2248 from hierophect/stm32-PWM
...
STM32: PWMOut
2019-11-04 22:08:01 -05:00
f185b30d71
Update PWMOut.h
2019-11-04 20:41:54 -05:00
38e38b9f8d
remove redundant comment
2019-11-04 17:20:10 -05:00
632b3267dc
Add auto-shutoff of DAC when channels de-inited
2019-11-04 17:08:00 -05:00
40f920fbdf
complete attribution edits
2019-11-04 14:39:41 -05:00
ca1eb4def1
Add other board globals
2019-11-04 14:35:23 -05:00
2111a7c4cf
Merge branch 'master' into stm32-defaults
2019-11-04 14:32:00 -05:00
3526fed611
add board global
2019-11-04 14:31:57 -05:00
15d8d88950
Add default defines
2019-11-04 14:15:26 -05:00
ccff7e70ca
Style changes and refactors
2019-11-04 11:30:49 -05:00
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
...
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
1c4f49bb83
attribution changes
2019-11-03 16:33:01 -05:00
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c
...
nrf: allocate two I2C on CPB
2019-11-03 13:15:36 -08:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2bdccf03a7
cpb: define the SPEAKER_ENABLE_PIN
...
This allows the board to disable the onboard speaker until explicitly
enabled in user code.
Testing performed on a CPB:
* Touching the AUDIO pin with a fingertip no longer generates noise/buzz
* Generating a waveform with `simpleio.tone` produces no sound by default
* When the board.SPEAKER_ENABLE is configured as a digital output and
set True, `simpleio.tone` does produce sound
Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to
speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
speaker_enable.direction = digitalio.Direction.OUTPUT
speaker_enable.value = True
before using the internal speaker.
Closes : #2258
2019-11-01 16:26:03 -05:00
fe47eba97f
nRF: Handle SPEAKER_ENABLE_PIN
...
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
2019-11-01 16:23:35 -05:00
8d0cc71aee
Add write protections, fix edge case read halt
2019-11-01 17:00:01 -04:00
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks
2019-11-01 13:20:58 -07:00
e605ce6317
Debugging additions
2019-11-01 14:30:28 -04:00
0a1a12b867
Revise PWM period generation algorithm to match other ports
2019-10-31 16:59:44 -04:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
c78d79938d
remove debug output
2019-10-30 17:07:16 -04:00
a8070a4185
Revise IRQ managment, add restart on failure
2019-10-30 16:59:53 -04:00
bb8046dbb3
remove debug messages
2019-10-30 10:00:50 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
6b0cb87cbf
Dynamic prescaler adjustment, adjust pulse resolution
2019-10-29 17:17:26 -04:00
4de5a33a43
Style changes
2019-10-29 10:24:26 -04:00
33deb6752b
Add harder resets to UART
2019-10-29 09:41:52 -04:00
e35eb08f1d
nrf: allocate two I2C on CPB
2019-10-28 21:08:53 -04:00
1505da784f
wip
2019-10-28 18:15:02 -04:00
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
3034cfc82f
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-28 12:16:01 -04:00
69bf926211
Merge remote-tracking branch 'upstream/master' into stm32-PWM
2019-10-28 12:01:28 -04:00
1d7d9043c1
CXD56 is a better platform name
2019-10-28 10:47:09 -04:00
358920db0e
Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only
2019-10-28 10:40:10 -04:00
c0f1ce590e
Add support across dev boards
2019-10-27 20:17:10 -04:00
7fd5e9b867
Fix issue with changing frequency
2019-10-27 19:41:01 -04:00
0cd8c3d5a8
Add all basic functions, never reset, dynamic pulse changes
2019-10-27 19:17:01 -04:00
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
...
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
cb491e855c
WIP
2019-10-27 14:31:25 -04:00
76817eaa10
Merge remote-tracking branch 'adafruit/master' into nano-33-ble
2019-10-25 22:41:26 -04:00
ab6fd34828
add object types to rgb status objects;mark spi rgb objects as never_reset
2019-10-25 22:32:43 -04:00
7d04d9109e
use bitbang SPI for DotStar; still need to fix hw SPI for dotstar
2019-10-25 15:37:27 -04:00
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
cdeb0857a9
Initial Itsy nRF52840 defn
2019-10-25 11:15:34 -04:00
cf7efee0d3
Add f405 pindefs
2019-10-24 18:00:50 -04:00
7f769580bd
Merge remote-tracking branch 'upstream/master' into stm32-PWM
2019-10-24 14:11:51 -04:00
3683ee3ffa
Merge pull request #2243 from hierophect/f405-rename-and-fixes
...
STM32: rename feather_stm32f405_express, fix makefile defs issue
2019-10-24 14:11:17 -04:00
511071e1ba
Rename feather across folders and config, fix makefile def issue
2019-10-24 12:51:40 -04:00
64337775f8
PWM Base functionality testing for F405
2019-10-24 12:43:34 -04:00
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
af1fab1915
Merge pull request #2226 from kamtom480/circuitpython-device-open
...
Do not open the same PWM device if it is already open
2019-10-23 15:08:40 -04:00
91c9d519ae
Refine comments and switch prefix_len to size_t
2019-10-22 23:09:56 -07:00
1d8a75fa3f
minor WIP
2019-10-22 13:11:45 -04:00
ca4b7f81e5
Initial template setup
2019-10-22 11:09:46 -04:00
ae30a1e5aa
Refine _bleio
...
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.
It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.
Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.
Relates to #586
2019-10-21 18:57:03 -07:00
a596213526
non-functional WIP
2019-10-21 17:06:40 -04:00
e4574fa3bf
Clean UART on reset
2019-10-21 13:17:51 +02:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
af28474b06
IRQ priority and port clearing scratchwork
2019-10-18 14:10:41 -04:00
e2cb29f2a0
Change default stack size to 64kiB for Spresense
2019-10-18 15:43:06 +02:00
3ad13e14d8
Do not open the same UART device again
2019-10-18 12:39:52 +02:00
b39ca3f8be
Do not open the same PWM device again
2019-10-18 12:39:22 +02:00
1decd111d5
Do not open the same ADC device again
2019-10-18 12:38:39 +02:00
4338511b28
Add get top and limit functions for Spresense
2019-10-18 11:10:22 +02:00
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
30c9ad2b2a
Update Spresense SDK to 1.4.1
2019-10-18 10:29:32 +02:00
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
14c64159c8
Implement requested changes, refactors
2019-10-16 13:50:54 -04:00
323fe418f7
Add support for other F4 MCUs
2019-10-16 13:14:57 -04:00
552900f18e
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-16 12:33:31 -04:00
b4a6246e30
Cleanup
2019-10-16 12:32:34 -04:00
14eefaafee
Hack in interrupt support
2019-10-16 11:33:55 -04:00
be8136dc6d
Merge remote-tracking branch 'adafruit/master' into bonding1
2019-10-15 15:55:21 -04:00
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
6f2e2faff2
Merge pull request #2214 from dhalbert/remove-unused-ports
...
Remove non-CircuitPython ports
2019-10-15 09:45:53 -07:00
a0d18ac4e6
add dummy common_hal_mcu_processor_get_voltage() for spresense
2019-10-15 09:07:12 -04:00
eca73436c9
Merge remote-tracking branch 'adafruit/master' into cpu-voltage
2019-10-15 09:03:24 -04:00
fdd7ebef2d
change calibration from analogin_reset() to analogin_init()
2019-10-14 23:38:41 -04:00
1a7c787d3c
Merge branch 'master' into master
2019-10-14 19:47:46 -07:00
615ec7f74d
merge from upstream
2019-10-14 18:12:58 -04:00
51582abc87
Merge pull request #2207 from kamtom480/circuitpython-spresense
...
Add Spresense board
2019-10-14 14:19:09 -07:00
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
b750ed3a0f
Change Spresense firmware download link
2019-10-14 08:42:10 +02:00
8dfc8b584f
Change Spresense reference_voltage to 0.0 (None)
2019-10-14 08:22:14 +02:00
9c8f969b34
remove ports/zephyr
2019-10-13 11:09:55 -04:00
0bed5f490a
remove ports/windows
2019-10-13 11:09:43 -04:00
8f792127da
remove ports/teensy
2019-10-13 11:09:03 -04:00
fc033bd954
remove ports/stm32
2019-10-13 11:08:52 -04:00
7bc02ad3ba
remove ports/qemu-arm
2019-10-13 11:08:35 -04:00
6dcaeae8c7
remove ports/pic16bit
2019-10-13 11:08:08 -04:00
c575cd7bc7
remove ports/minimal
2019-10-13 11:07:40 -04:00
7692e06230
remove ports/esp8266
2019-10-13 11:07:07 -04:00
41ef2ab591
remove ports/esp32
2019-10-13 11:06:54 -04:00
b0d656683b
remove ports/cc3200
2019-10-13 11:06:33 -04:00
3d17e1d418
remove ports/bare-arm
2019-10-13 11:06:17 -04:00
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
fae6e29546
nrf: PWMAudioOut: deactivate PWM when deinitting self
...
.. otherwise, when an AudioPWMOut object was deinitted without being
explicitly stop()ped, it would use up a slot in active_audio[]; the
5th iteration would create a non-working audio object which would just
buzz instead of playing the right thing.
Closes : #2203
2019-10-12 14:01:35 +09:00
ef459326cb
nrf: PWMAudioOut: coding style
2019-10-12 13:57:31 +09:00
1140ff5cd5
WIP
2019-10-11 15:47:55 -04:00
6b9375804c
Rename circuitpython.spk to firmware.spk
2019-10-11 17:15:25 +02:00
771f43591a
Add links to serial drivers
2019-10-11 12:57:43 +02:00
eb1dfd2312
Add .gitignore
2019-10-11 12:11:48 +02:00
0d139e4eca
Add a way to change serial device name
2019-10-11 12:09:51 +02:00
c062990830
Make Makefile work across OS
2019-10-11 12:09:51 +02:00
8f653d6238
Use CXD56 pin names
2019-10-11 12:09:51 +02:00
5f09609d41
Add Spresense board folder
2019-10-11 12:09:51 +02:00
1fa8841d20
Change port name to cxd56
2019-10-11 08:23:51 +02:00
bfebbaee32
Merge remote-tracking branch 'upstream/master' into stm32-uart
2019-10-10 14:28:19 -04:00
06b2fed518
improve macro readability
2019-10-09 16:06:23 -04:00
4ce7a4cfdb
Merge branch 'master' into stm32-DAC
2019-10-09 15:47:43 -04:00
5f33c542b4
Fix include issues
2019-10-09 14:52:30 -04:00
8a94f25181
Text fixes
2019-10-09 13:54:40 -04:00
cb0ed264c4
Implement DAC
2019-10-09 13:34:20 -04:00
6d1748fd59
Add spresense-exported-sdk submodule
2019-10-09 08:38:50 +02:00
526925f1c6
Add Spresense board
2019-10-09 08:27:08 +02:00
f58d54cd22
Preliminary read system, not buffered
2019-10-08 16:03:51 -04:00
f6e553f89f
Merge branch 'master' into circuitpython-number-endpoint
2019-10-08 09:41:29 +02:00
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
cc3a17845c
Fix USB issues, frequency macro, F412 tests
2019-10-07 14:22:12 -04:00
59ed879c8f
Merge pull request #2197 from hierophect/always-build-modules
...
Sort some modules into ALWAYS-BUILD in mpconfig
2019-10-07 09:09:28 -04:00
7aefcc449a
Add an alternative way to number the USB endpoints
...
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
2019-10-07 12:31:42 +02:00
fc19e03128
WIP: bonding
2019-10-06 21:30:26 -04:00
0b85172ba6
WIP
2019-10-04 14:37:18 -04:00
51901f7de0
Add peripheral definitions
2019-10-04 11:42:38 -04:00
dc4abb922b
Revert accidental OS delete
2019-10-03 15:40:46 -04:00
f4922a530a
Merge pull request #2186 from hierophect/stm32-spi-flash
...
STM32: SPI Flash
2019-10-03 15:32:56 -04:00
7a2f60c43d
Add Always Build flag, remove redundancy
2019-10-03 15:23:45 -04:00
eacdb1da6e
Disable timeout, remove redundancy
2019-10-03 14:43:25 -04:00
463415a7ef
update stm32f4 port to use tinyusb synopsys tree
2019-10-03 13:26:03 -04:00
83c49a5c80
Increase SPI timeout duration
2019-10-03 09:14:54 -04:00
5a6194839b
Timeout fix for I2C device testing
2019-10-02 17:59:42 -04:00
86305bfdfe
Make all errors value errors
2019-10-02 17:32:54 -04:00
9aa6d215fd
Add some definitions for when F412 can be implemented
2019-10-02 16:03:22 -04:00
5a2f82095a
Implement SPI flash settings, bugfix for SPI pin assignment
2019-10-02 15:17:49 -04:00
d6e987e587
Merge pull request #2182 from hierophect/stm32-spi
...
STM32: SPI Support
2019-09-30 20:00:23 -07:00
b66700720b
improve error readability
2019-09-30 18:05:07 -04:00
1f90cffc89
protect against edge case
2019-09-30 13:33:20 -04:00
56eb9666ea
Implement never-reset, fix F412
2019-09-30 11:35:40 -04:00
a475b667b5
Clean up debugging messages, remove shortcuts
2019-09-30 11:04:09 -04:00
492bc3eedc
Expand pin definitions for all boards
2019-09-30 10:45:02 -04:00
e2d0ad6adc
Add settings reconfiguration
2019-09-29 15:01:32 -04:00
bf7b841020
Further reversion
2019-09-29 13:22:12 -04:00
89315999e2
Fix bad returns, revert flash changes
2019-09-29 13:18:43 -04:00
270396a882
Refine SPI settings for testing
2019-09-29 13:01:27 -04:00
d7443fce54
First implementation of read write
2019-09-27 17:59:55 -04:00
ad33950966
Flash memory changes - non functional
2019-09-27 11:00:09 -04:00
aa1eed3bd3
initial Arduino Nano 33 BLE board definition
2019-09-26 15:28:57 -04:00
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
51df8d18b4
Merge remote-tracking branch 'upstream/master' into stm32-spi
2019-09-26 13:44:24 -04:00
8221553600
Merge pull request #2175 from hierophect/stm32-f405-support
...
STM32 F405 support
2019-09-26 10:38:03 -07:00
f4a31a7843
Update PID to suggestion
...
USB_PID = 0x805C (Pyboard
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2019-09-26 11:38:08 -04:00
f08127bfcc
WIP
2019-09-26 11:35:08 -04:00
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
a926d01509
reorganize pins
2019-09-25 11:53:49 -04:00
f286737868
add peripheral definitions
2019-09-25 11:37:27 -04:00
6058677979
whitespace fix
2019-09-24 16:10:43 -04:00
742e747609
Implement another USB ID
2019-09-24 14:53:56 -04:00
c3baf286c1
Implement correct USB IDs
2019-09-24 14:51:57 -04:00
d597410330
implement suggested changes
2019-09-24 14:15:04 -04:00
dc1109dba7
add feather support
2019-09-24 14:07:03 -04:00
61a45cdaed
clock fixes
2019-09-24 13:17:46 -04:00
31a22858d5
text fixes
2019-09-24 10:05:40 -04:00
2b65a0e95f
WIP
2019-09-23 17:40:28 -04:00
f1cd1c5d4d
minor edits
2019-09-23 13:30:37 -04:00
19cf716461
Fix missing items
2019-09-23 12:14:27 -04:00
60bb6acf38
Add F405 support
2019-09-23 11:59:14 -04:00
fd1a257df3
Merge branch 'master' into stm32-f405-support
2019-09-23 09:36:03 -04:00
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
7f1bc48a88
Merge pull request #2173 from hierophect/stm32-os
...
STM32: Add OS and Struct support
2019-09-20 16:42:31 -04:00
200c474a13
correct typo
2019-09-20 15:55:11 -04:00
00f1e4f1ad
WIP
2019-09-20 15:54:34 -04:00
8d16379634
Merge pull request #2151 from hierophect/stm32-peripherals
...
STM32: peripheral management
2019-09-20 15:40:25 -04:00
9af5f3a7a7
Add OS and struct support
2019-09-20 14:51:23 -04:00
ef15ebe8c7
Repeated initialization protection, cleanup
2019-09-20 14:33:37 -04:00
13a9c446ee
Merge pull request #2171 from hierophect/stm32-find-fix
...
STM32: fix illegal option error on mac builds
2019-09-20 10:19:58 -07:00
19c6c96929
Merge pull request #2130 from jepler/nrf-debugflags
...
nrf: Makefile: sensible flags for debugging
2019-09-20 10:18:00 -07:00
7cea078494
Added existance check
2019-09-20 12:39:48 -04:00
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
b7598f7058
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-09-19 14:20:28 -07:00
18c5be8835
QOL pin adds
2019-09-19 17:01:25 -04:00
9da5723c59
F412 support, cleanup
2019-09-19 16:32:38 -04:00
c12860ff7d
the code equivalent of smacking something really hard with a wrench
2019-09-19 16:10:26 -04:00
b325eadc33
various failed attempts to get I2C to reset
2019-09-19 16:02:52 -04:00
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51
2019-09-19 12:21:54 -07:00
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
d56b62e44c
Fix crash related to improper instance assignment
2019-09-19 14:15:12 -04:00
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
c85873e4e6
index fix
2019-09-19 12:45:47 -04:00
60985968a8
Reorganize storage to per-pin
2019-09-19 12:18:18 -04:00
12cd009bb9
WIP
2019-09-18 16:49:15 -04:00
bf62477ff9
Merge branch 'stm32-analogio' into stm32-peripherals
2019-09-18 13:45:22 -04:00
cd5ec365d3
Cleanup
2019-09-18 13:44:08 -04:00
d60ecc5e3d
Rework I2C peripheral check
2019-09-18 13:42:54 -04:00
69a0bfaf34
Merge branch 'stm32-analogio' into stm32-peripherals
2019-09-18 12:15:44 -04:00
c9b86111f4
text fix
2019-09-18 11:45:21 -04:00
601c3ea8dc
minor HAL swap
2019-09-17 17:54:29 -04:00
97b1208829
Merge remote-tracking branch 'upstream/master' into stm32-analogio
2019-09-17 17:47:15 -04:00
48ae684c6e
Adjust settings to support F412
2019-09-17 17:46:44 -04:00
69234cc8d6
Merge pull request #2163 from tannewt/cpx_displayio
...
Add custom CPX build for display support
2019-09-17 16:55:42 -04:00
863655044e
Re-expand pin reset
2019-09-17 16:52:44 -04:00
71531dd4d1
Fix out of date HAL inputs in DigitalIO
2019-09-17 16:15:39 -04:00
7c713b9e3b
Fix crash related to ADC timeout
2019-09-17 15:45:15 -04:00
168823e096
Retract pin resets, revert to HAL, QOL changes
2019-09-17 15:07:08 -04:00
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
b5a9ed3688
Merge pull request #2161 from jepler/nrf-analog-reference
...
nRF: Change analog reference voltage
2019-09-17 09:41:52 -07:00
dffedd7c86
samd: peripherals: update submodule reference
2019-09-16 21:48:31 -05:00
d39c85e3f5
nRF: Change analog reference to VCC(/4)
...
@ladyada says:
"having this be adjustable (reference) would be ideal cause you can get
absolute voltages but for now, VCC/4 + 4x matches every other chip :)"
... and indeed doing it this way happens to give a much more steady
reading when using a VCC-referenced resistance, and so many of the simple
things you'd wire up are actually VCC-referenced anyway.
2019-09-16 21:43:07 -05:00
c56186da8c
nRF: Change analog reference voltage
...
Datasheet reading explains one reason why readings might have been 10% low.
2019-09-16 18:35:48 -05:00
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
61698eb5d8
AnalogOut / AudioOut: Copy settings from Arduino
...
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.
Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).
A fresh clock (6) is allocated for the new 12MHz clock. This matches
the Arduino value, though not the GCLK index.
Modify other settings to more closely resemble Arduino.
In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.
This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic
Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
2019-09-15 11:30:49 -05:00
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
78de4b70ed
Implemented working I2C on F412.
2019-09-13 14:00:53 -04:00
3422e53bd1
Merge pull request #2147 from jepler/issue2146
...
nRF: PWMOut: At deinit, make pin available again
2019-09-13 09:32:28 -07:00
d96aa8dac4
Merge branch 'stm32-analogio' into stm32-peripherals
2019-09-13 12:10:54 -04:00
f5cb2cc14e
First pass at I2C pin authentication
2019-09-12 19:00:02 -04:00
e445e7930e
Merge remote-tracking branch 'upstream/master' into stm32-pin-remap
2019-09-12 16:00:41 -04:00
6b6178613d
WIP
2019-09-12 16:00:01 -04:00
1fda6d4a48
Merge branch 'stm32-pin-remap' into stm32-peripherals
2019-09-12 14:27:24 -04:00
55eb8dcfa0
ADC unit select, reset bugfix
2019-09-12 13:47:01 -04:00
df48312ce7
nRF: PWMOut: At deinit, make pin available again
...
Closes : #2146
2019-09-11 20:09:38 -05:00
57ce381bcd
disable claim pin for debug
2019-09-11 17:26:33 -04:00
4b3796a303
Merge remote-tracking branch 'upstream/master' into stm32-analogio
2019-09-11 14:12:01 -04:00
a59a8e7a19
Merge branch 'stm32-pin-remap' into stm32-analogio
2019-09-11 14:11:47 -04:00
6e007f4e8c
text fixes
2019-09-11 14:09:57 -04:00
d888922db6
minor text fix
2019-09-11 13:55:48 -04:00
3d2a4d4165
Merge branch 'stm32-f412-tinyusb' into stm32-analogio
2019-09-11 13:47:20 -04:00
9e25d9a9be
Support for F412
2019-09-11 13:45:36 -04:00
9f8c8c6504
Compiler level bit packing
2019-09-11 13:12:49 -04:00
37248037d7
Alternative implementation via HAL for readability comparison
2019-09-11 11:35:37 -04:00
99c3cab00f
text fixes
2019-09-10 19:51:26 -04:00
500b21c236
First pass at full LL implementation
2019-09-10 19:48:24 -04:00
49b04f4b77
Minor text fix
2019-09-10 17:52:07 -04:00
89fed709ad
Merge pull request #2127 from jepler/nrf-i2s
...
nrf: Add i2s audio output
2019-09-10 11:00:26 -07:00
b8200d7295
fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use
2019-09-09 23:17:52 -04:00
7b9dfc9952
nrf: i2s: tune audio buffering
...
.. based on some tasks I found that caused stuttering:
# Test SD and printing
while True: os.listdir('.')
# Test bulk I/O
while True: len(open('somefile.wav', 'rb').read())
Each of these tasks *WAS* worse and I am improving them in a separate
PR by adding RUN_BACKGROUND_TASKS to them.
2019-09-09 20:13:12 -05:00
c66f5a8536
nrf: i2s: rewrite without 'goto'
2019-09-09 19:26:18 -05:00
fe9605a6a3
nrf: i2s: Comment this slightly tricksy code
2019-09-09 19:25:52 -05:00
c438468a82
Updated VID and PID
2019-09-09 17:05:18 -04:00
d8251ae4ab
Include full descriptor list
2019-09-09 15:01:04 -04:00
129615a724
text fixes
2019-09-09 11:58:27 -04:00
426ddb356e
Add support for F412 via latest tinyusb update
2019-09-09 11:42:55 -04:00
ccf08aa3df
nrf: I2SOut: deal more gracefully with errors from the sample
2019-09-08 21:59:07 -05:00
e890bc8efe
nrf: Makefile: sensible flags for debugging
...
This enables the highest level of debug symbols, and all optimizations
except lto that do NOT interfere with debugging, in the view of the gcc
maintainers.
2019-09-08 21:07:00 -05:00
f38ee42874
nrf: Add i2s audio output
...
Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC.
I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal
bit rates. With this setup, all the 11025Hz samples sound good.
I tested play, pause, and loop functionality.
During some runs with 22050Hz samples, there were glitches. However,
these may have only occurred during runs where I had set breakpoints
and watchpoints in gdb.
I also tested with a MAX98357A I2S amplifier. On this device, everything
sounded "scratchy". I was powering it from 5V and the 5V rail seemed
steady, so I don't have an explanation for this. However, I haven't
tried it with a SAMD board.
2019-09-08 16:46:35 -05:00
bd7b03fc7e
Merge pull request #2124 from dhalbert/cpb-fixes
...
Fix Circuit Playground Bluefruit pin errors
2019-09-08 12:07:16 -04:00
0d2e9c3762
WIP
2019-09-07 15:54:16 -04:00
beb40a62a7
Fix missed shift replacement
2019-09-07 13:19:50 -04:00
642f4535f4
text fixes
2019-09-06 19:44:57 -04:00
4490fb196d
delete analogio for now
2019-09-06 19:42:03 -04:00
a3ed5ec27b
Add latest USB support
2019-09-06 18:02:57 -04:00
589b502bfc
Merge branch 'master' into stm32-analogio
2019-09-06 17:55:33 -04:00
a932d2c4a1
Minor fixes
2019-09-06 17:40:45 -04:00
8c0be5fbe2
Pack pin numbers, add ADC to pin structure, support DigitalIO
2019-09-06 17:30:52 -04:00
cf6fbcbf2d
Merge pull request #2123 from hierophect/stm32-flashstub-fix
...
Fix stm32f412zg compile warning
2019-09-06 14:56:24 -04:00
3c22c690c8
CPB A1 pin mapping wrong; remove A7
2019-09-06 14:17:11 -04:00
3156ee1acb
Re-apply warning as error
2019-09-06 11:28:57 -04:00
ba45f98073
Add basic analogio files
2019-09-06 11:26:20 -04:00
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking
...
Samd dma tracking
2019-09-05 11:27:59 -07:00
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4
...
Add support for PewPew M4 board
2019-09-05 11:26:47 -07:00
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
f3af2a6fb7
Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac
2019-09-04 21:56:13 -04:00
195de97c67
use only one endpoint pair for MSC except on SAMD21
2019-09-04 21:45:16 -04:00
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden
...
Add .hidden to TileGrid and Group
2019-09-04 15:48:00 -04:00
321b57a5d2
Merge pull request #2080 from sommersoft/mixer_voice
...
Add audiocore.MixerVoice
2019-09-04 12:46:59 -07:00
b46c8dcc62
Merge pull request #2065 from hierophect/f411re-feature-buildout
...
F411re feature buildout
2019-09-04 15:45:54 -04:00
7951646b9a
Disable bitbangio on uGame10
2019-09-04 11:49:47 -07:00
479b047618
Reverted descriptor changes pending HID restructuring
2019-09-04 13:58:18 -04:00
b1c3d47413
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-09-01 21:16:12 -05:00
c4d6f4f536
disable 'audiomixer' for all M0 boards
2019-09-01 17:39:20 -05:00
b954b2f5df
Merge pull request #2092 from dhalbert/bleio-api-revamp
...
Bleio attribute api revamp
2019-08-29 21:48:31 -07:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
7a64af9280
rename bleio module to _bleio
2019-08-29 18:44:27 -04:00
b11b7916fd
address minor issues: typos, make translate, and sphinx
2019-08-29 17:58:21 -04:00
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
f17059b10b
another API rework: less abstraction leakage
2019-08-28 23:15:22 -04:00
30a9346373
samd: audio_dma: Track channel allocation
...
Previously, we depended on allocated channels to always be
"dma_channel_enabled". However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.
((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)
Therefore,
* Add audio_dma_{allocate,free}_channel.
* audio_dma_free_channel implies audio_dma_disable_channel
* track via a new array audio_dma_allocated[]
* clear all allocated flags on soft-reboot
* Convert find_free_audio_dma_channel to audio_dma_allocate_channel
* use audio_dma_allocated[] instead of dma_channel_enabled() to check
availability
* remove find_free_audio_dma_channel
* For each one, find a matching audio_dma_disable_channel to convert
to audio_dma_free_channel
Closes : #2058
2019-08-28 17:00:22 -05:00
0b00787b4d
samd: AudioOut: ensure stopped before deinit
...
.. otherwise, a sequence like
>>> a = audioio.AudioOut(board.A0)
>>> a.play(sample, loop=True)
>>> a.deinit()
would potentially leave related DMA channel(s) active.
2019-08-28 16:43:55 -05:00
19c59b41ed
bleio: API change to create and connect related objects simulatenously: no orphan bleio objects
2019-08-28 16:15:09 -04:00
a72bcab0fd
Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp
2019-08-28 16:09:18 -04:00
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
0364f1dc85
remove some debugging prints
2019-08-26 08:17:59 -04:00
76446f634b
BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding
2019-08-25 21:38:13 -04:00
696117b048
disable audiomixer on boards it doesn't fit on
2019-08-25 14:53:34 -05:00
2e4b687ba5
enable audiomixer on nrf
2019-08-25 07:32:48 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
2497cbe186
Fix nrf builds
2019-08-22 14:23:33 -07:00
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
d37dd4d758
Updated ParallelBus implementation in nrf port
2019-08-22 14:08:33 -07:00
70680d5b22
EPaper displays work mostly.
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
18f441ae35
Merge pull request #2083 from dhalbert/no-32khz-xtal
...
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 13:14:40 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area
...
To displayio.Display: expose fill_area and add a property for rotation
2019-08-21 23:48:21 -07:00
acc6df4959
merge similar fix in
2019-08-22 01:29:34 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
524fa82092
Merge pull request #2081 from dhalbert/rotaryio-pin-check-fix
...
typo in IncrementalEncoder.c
2019-08-21 13:02:06 -07:00
389e7cc35d
Merge pull request #2072 from bmeisels/nrf-no-crystal-support
...
Add support for nrf boards that don't have an external crystal
2019-08-21 13:01:26 -07:00
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
fe2ec6c887
Add support for nrf boards that don't have an external crystal
2019-08-20 23:30:21 +03:00
6e3a6d0ac5
typo in IncrementalEncoder.c
2019-08-20 16:23:17 -04:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
44b28d1187
update tinyusb to 00c440cb
2019-08-19 19:42:45 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
e490e6361f
Add warnings, cosmetic fixes, remove vestigial modules
2019-08-19 10:47:18 -04:00
26a05d01dc
Merge remote-tracking branch 'origin/master' into nrf-pdm-audioin
2019-08-18 21:30:14 -05:00
95411a62b3
Cosmetic fixes
2019-08-18 19:08:27 -04:00
912fd7759d
nrf: PDMIn: Implement
...
So far, this supports only 16kHz and 16-bit samples with a fixed gain.
This is enough to support the basic functionality of e.g., sensing
ambient audio levels.
2019-08-18 15:58:04 -05:00
79f8a85786
nrf: stub out audiobusio.PDMIn, audiobusio.I2SOut
2019-08-18 15:55:57 -05:00
3f7321af00
Merge pull request #2031 from jepler/nrf-lto
...
Enable link-time optimization for nrf targets
2019-08-18 12:35:26 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
...
BLE: more features
2019-08-16 14:50:00 -07:00
630c92392a
address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings
2019-08-16 15:18:53 -04:00
7dbf1a8caa
text fixes
2019-08-15 17:56:15 -04:00
1f42ce5f40
QOL fixes, compatibility fixes, attribution
2019-08-15 17:45:40 -04:00
bc7ba33892
Add uid fetch, revert USB hacks
2019-08-15 16:35:01 -04:00
a9d3ad86e5
Fix flash size, add filesystem disable flag
2019-08-15 15:55:33 -04:00
0fdb5a032f
Text fixes
2019-08-15 15:12:50 -04:00
620d3d14dd
Add conditional endpoints to descriptor script
2019-08-15 13:41:51 -04:00
1539dca7f0
Add reset support, minor fixes
2019-08-14 13:14:42 -04:00
5877bd6036
CPblue initial definition
2019-08-13 22:12:36 -04:00
c4c55fffb1
Fixed remaining issues with flash organization and writing
2019-08-13 18:05:40 -04:00
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano
...
Add PyPortal Titano
2019-08-12 16:01:10 -07:00
11dd3a260e
nrf: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
d9ee2d28a0
atmel-samd: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
300dc68955
Further non-functional flash changes
2019-08-10 18:00:09 -04:00
294d6dc867
Add flash functions and setup, fix msc descriptor bug
2019-08-09 19:58:54 -04:00
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
1570ef2dd4
specifying attribute length; fix up value setting
2019-08-07 23:49:09 -04:00
33b949abfa
samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines
...
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background(). This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
2019-08-07 21:29:24 -05:00
500d1bb168
samd: audio_dma.c: Remove exceptions, just return early
...
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
2019-08-07 20:20:36 -05:00
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
c375a5d37f
Add pin and module support for F411
2019-08-07 18:12:13 -04:00
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
d047b73a9c
fix newly-introduced bugs; UART client/server working again
2019-08-07 11:10:21 -04:00
39c64bf83c
samd: audio_dma_stop: don't free invalid channel
...
audio_dma_stop can be reached twice in normal usage of AudioOut.
This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number. This also prevents
the event channel from being disabled twice.
The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
2019-08-06 22:00:31 -05:00
8b717955ba
samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking
...
It turns out the "disable" error will fire in practice, we'll fix that
next.
2019-08-06 22:00:31 -05:00
d74c8b9425
WIP: more Descriptor work; refactor gattc/gatts read/write
2019-08-06 22:55:25 -04:00
6253f11503
samd: audio_dma_stop: Clear out audio_dma_state[]
...
As identified in #1908 , when both AudioOut and PDMIn are used, hard
locks can occur. Because audio_dma_stop didn't clear audio_dma_state[],
a future call to audio_dma_load_next_block could occur using a DMA
object which belongs to PDMIn.
I believe that this Closes : #1908 though perhaps it is still not the full
story.
Testing performed: Loaded a sketch similar to the one on #1908 that
tends to reproduce the bug within ~30s. Ran for >300s without hard
lock. HOWEVER, while my cpx is no longer hard locking, it occasionally
(<1 / 200s) announces
Code done running. Waiting for reload.
(and does so), even though my main loop is surrounded by a 'while True:'
condition, so there are still gremlins nearby.
2019-08-06 21:34:21 -05:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
59efce3035
Merge pull request #2039 from dhalbert/metro-52840
...
Metro nRF52840 rev A defn; remove '#define FEATHER52840' from mpconfigboard.h
2019-08-05 18:48:36 -07:00
b675a27e16
Merge pull request #2000 from jepler/nrf-pwm-audio
...
Implement PWM audio out for the nrf port
2019-08-05 17:26:27 -07:00
c56566179a
Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files
2019-08-05 18:10:27 -04:00
b67d04a5b1
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 16:35:44 -04:00
2489c09b44
Merge i2c implementation
2019-08-04 17:24:07 -04:00
a635d46b1a
Fix merge related issues
2019-08-04 17:19:38 -04:00
0c43bae01d
Merge branch 'master' into f411re-feature-buildout
2019-08-04 16:37:49 -04:00
268cf0a3cc
Quick fix for incorrect MCU package type
2019-08-04 16:31:03 -04:00
77bc1ba03e
nrf: PWMAudioOut: Remove the need to wait in "pause"
...
The original formulation was because I saw the need to avoid a transition
from playing to stopped exactly when a resume was taking place. However,
@tannewt was concerned about this pause causing trouble, because it could
be relatively lengthy (several ms even in a typical case).
After reflection, I've convinced myself that updating the registers
in this order in resume avoids a window where a "stopped" event can
be missed as long as the shortcut is updated first.
Testing re-performed: pause/resume testing of looped RawSample and
WaveFile audio sources.
2019-08-03 08:19:25 -05:00
4bae29b925
nrf: enable link-time optimization
...
Testing performed: installed freshly built .uf2 on a Particle Xenon.
Checked that circuitpython still starts.
Checked that the size of all .uf2 files for nrf builds are plausible.
Aside from memory savings, the performance of Python code (pystone)
increased by about +14%.
However, this adds about 12-16 seconds to each nrf build.
Timings & Sizes (build system: i5-3320M, -j5 parallelism on 4 threads):
Before:
$ make -j5 BOARD=particle_xenon
765004 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232076 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
68.54user 11.83system 0:34.34elapsed 234%CPU
pystones before: 570
After:
$ make -j5 BOARD=particle_xenon
804284 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232072 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
71.06user 11.77system 0:46.91elapsed 176%CPU
pystones after: 650
Timings on travis:
Before:
Build feather_nrf52840_express for pl took 55.79s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 3.18s and succeeded
After:
Build feather_nrf52840_express for pl took 62.72s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 19.10s
Closes : #1396
2019-08-02 20:59:47 -05:00
7ce3776b80
WIP: rework of Characteristic properties; enhance Descriptor; not tested
2019-08-02 17:57:31 -04:00
28b7cbfca6
nrf: Mark interrupt vectors as used
2019-08-02 07:53:35 -05:00
34e2bab96a
nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE
2019-08-01 18:53:07 -05:00
76f65ac694
Implement play/pause
...
.. and also incidentally fix a problem where a RawSample could only
be looped 131070 times.
2019-07-31 20:02:56 -05:00
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
b0f7c7bc4c
Merge remote-tracking branch 'origin/master' into nrf-pwm-audio
2019-07-31 16:32:54 -05:00
06d53ef8a7
minor debugging changes
2019-07-31 17:06:44 -04:00
e2fc55f829
Add baseline HAL I2C support
2019-07-31 14:58:55 -04:00
ee518b9141
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-07-31 11:22:48 -04:00
91d791afd0
cleanup adapter.address; add uniquish suffix to BLE device name
2019-07-31 00:30:24 -04:00
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
83129b8c63
BLE: peripheral client pairing (not yet bonding); fix time doc formatting
2019-07-30 14:26:26 -04:00
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
b72352949b
PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_
2019-07-29 18:39:00 -04:00
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
6c7723905c
Add temp status LEDs
2019-07-29 11:21:35 -04:00
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
343d5aa0ac
Delete redundant file
2019-07-26 16:48:23 -04:00
90b1701b6c
Add CDC REPL access
2019-07-26 14:06:27 -04:00
a183425e00
ports/nrf: Implement audioio.AudioOut using PWM
...
This implements AudioOut, with known caveats:
* pause/resume are not yet implemented (this is just a bug)
* at best, the sample fidelity is 8 bits (this is a hardware limitation)
Testing performed:
My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected. It is powered from
VUSB.
I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive. This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270
Nothing about the code I've written should limit the usable pins.
All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
2019-07-26 07:57:11 -05:00
2bc704fe07
ports/nrf: factor out routines for allocating, freeing pwm channels
2019-07-26 07:52:37 -05:00
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
d99d3bd471
Merge pull request #2010 from jepler/audiocore
...
audiocore: Factor from audioio
2019-07-25 13:52:30 -07:00
6b44e40ee8
audiocore: Factor from audioio
...
When nrf pwm audio is introduced, it will be called `audiopwmio`. To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.
INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
2019-07-25 06:44:26 -05:00
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup
...
Add STM32 Discovery F412ZG and F411RE support
2019-07-24 18:49:48 -07:00
295afaaf6c
Update SystemCoreClock macro
2019-07-24 16:31:25 -04:00
981398406c
Implement working (if useless) USB on F411
2019-07-24 16:23:35 -04:00
21f1ae51df
Merge in PR edits
2019-07-24 15:02:26 -04:00
d66c9590af
Merge tinyusb changes from upstream
2019-07-24 14:54:22 -04:00
a63df51893
Requested changes, general cleanup
2019-07-24 14:21:27 -04:00
c921f6637f
update tinyusb lib to 0.5.x
2019-07-24 16:46:31 +07:00
267468834d
Pin down some TUSB issues
2019-07-23 19:40:26 -04:00
0dee1a1646
Setup for changes
2019-07-23 17:04:03 -04:00
f9b5a9af4e
Merge branch 'F3xx-port-setup' into f411re-tinyusb
2019-07-23 15:17:18 -04:00
5cfde7b6ea
Switch to submodule for cube files
2019-07-23 14:37:30 -04:00
9c1487cff6
Python doc generator fixes
2019-07-23 13:48:59 -04:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1
...
Update Arch Linux ARM compiler installation instructions
2019-07-22 19:29:53 -07:00
a3673cc79b
Set up for new tinyusb integration. Not yet functional.
2019-07-22 17:16:33 -04:00
58630a844a
Add feature conditionals and clean up
2019-07-22 12:58:28 -04:00
e4d92a3aad
Fix incorrect preprocessor define NRFX_TIMER3/4
...
Should be NRF_TIMER3 and NRF_TIMER4
2019-07-22 20:07:05 +05:30
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.
2019-07-19 16:10:32 -07:00
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
10b9ca5a92
pin selection cleanup, tinyUSB update
2019-07-19 15:09:45 -04:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
734012aa8b
Makefile cleanup
2019-07-18 17:55:57 -04:00
755b86e38b
Deinit-capable USB on 411
2019-07-18 17:17:46 -04:00
43e8a4110f
Add missing files for DigitalIO
2019-07-17 14:18:01 -04:00
45e73c414a
fix gitignore
2019-07-17 14:14:03 -04:00
c588cc6db0
first pass of DigitalIO
2019-07-17 14:07:33 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
f31a0d9cf5
Serial REPL support
2019-07-11 13:41:10 -04:00
d12e1a8d74
Merge pull request #1990 from kattni/pyruler
...
Adding PyRuler to CircuitPython.
2019-07-10 12:28:43 -07:00
a0e6975b9d
Add some usb reference material, non functional
2019-07-10 14:26:57 -04:00
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
7742a97c22
Add STM32F412-DISCO support, cleanup
2019-07-09 13:03:22 -04:00
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
040acc3a32
remove dependencies for stable build
2019-07-01 19:47:10 -04:00
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
94a2eff05c
remove build, fix link issues)
2019-06-28 19:22:23 -04:00
04a9bc0d35
case changes
2019-06-28 16:45:07 -04:00
b93f93f174
name change but actually
2019-06-28 16:34:27 -04:00
caed59ec64
name change
2019-06-28 16:21:13 -04:00
16ba035ba7
first commit, very crude
2019-06-28 15:36:08 -04:00
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
d3adfde22a
Merge pull request #1968 from adafruit/4.0.x
...
Merge in nrf neopixel fix
2019-06-25 11:35:58 -07:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
1356819de1
Handle None for BLE name; fix ScanEntry bug; compile issue
2019-06-17 23:16:40 -04:00
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
608bf5076b
Merge pull request #1804 from ITACAInnovation/master
...
Merging updates
2019-04-16 13:54:40 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
7822d013cd
Merge pull request #1798 from ntavish/papyr
...
Add support for Electronut Labs Papyr.
2019-04-16 10:13:19 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
7573da03f6
Merge pull request #1779 from dhalbert/nrf-nvm-2
...
nrf nvm: touchups to nickzoic PR #1768
2019-04-15 14:23:35 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
19278e0284
Merge pull request #1736 from nickzoic/circuitpython-nickzoic-1046-nrf-rtc-2
...
Circuitpython nickzoic 1046 nrf rtc 2
2019-04-02 17:38:24 -04:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
e254597c24
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-28 17:27:59 -07:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
54a41e0812
Merge branch 'master' into circuitpython-nickzoic-1046-nrf-rtc
2019-03-28 14:48:10 +11:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
7bac10ab6e
Merge pull request #1700 from ITACAInnovation/master
...
uChip board support for Circuitpython environment
2019-03-25 14:05:12 -04:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
8543695f9d
Merge pull request #1653 from python-ugame/master
...
Add frozen stage module to ugame10 board
2019-03-19 09:42:20 -07:00
9cceea0d68
nrf: fix internal flash writes
2019-03-18 09:11:40 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
3f6713abc1
Fix unix build by using safe mode stub
2019-03-12 11:56:35 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
cfb54f0263
Merge pull request #1638 from dhalbert/disable-SPIM3
...
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 10:57:56 -07:00
c4586c0531
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 08:31:03 -04:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
e3606461c5
Merge pull request #1558 from siddacious/bmp_bitdepths
...
initial support for additional bitdepths in OnDiskBitmap
2019-02-24 13:21:54 -05:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
d218069f03
Merge pull request #1584 from tannewt/disable_concurrent_write_protection
...
Add option to disable the concurrent write protection
2019-02-21 17:15:50 -05:00
ed1ace09e9
Fix unix build by using filesystem stub
2019-02-21 13:23:28 -08:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
5ec92415b0
fix module weak links; add missing nrf features
2019-02-17 17:29:28 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
72c03268a4
remove circuitpy_rules.mk; not used
2019-02-15 19:24:34 -05:00
5a32c88db3
merge from upstream and move ure options;make translate
2019-02-15 19:19:52 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
77ff17cc8d
atmel-samd: Enable extra ure functionality on Express boards
...
This enables ure.sub(), Match.span/start/end() and the
ure.Compile.search/match() pos/endpos arguments.
2019-02-14 15:42:46 +01:00
9cdffe5e8c
atmel-samd: Remove samd module from SAMD21 builds
...
Remove the samd module which has representations of the clocks.
This is done to save on precious flash.
2019-02-14 15:42:32 +01:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
a1a4959071
Merge pull request #1541 from dhalbert/nrf-two-uarts
...
nrf: Add second UARTE to busio.UART. Init uarts on startup.
2019-02-13 17:31:55 -08:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd.
2019-02-11 20:55:06 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
63d456127b
Merge pull request #1508 from adafruit/tannewt-patch-8
...
Fix up board build
2019-01-31 14:22:32 -05:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
323108e2ba
Merge pull request #1503 from hathach/nrf-tinyusb-sd
...
update tinyusb, work better with sd
2019-01-31 10:36:12 -05:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
a51f2b0716
refactor nrfx from supervisor/usb.c
2019-01-30 22:30:23 +07:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
d1fb384a4a
update tinyusb, work better with sd
2019-01-29 21:03:18 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
f46ec0253d
Merge pull request #1484 from larsks/issue/1483
...
tell people that esp8266 is no longer supported
2019-01-22 13:24:51 -08:00
3d3c50f927
tell people that esp8266 is no longer supported
...
Closes #1483
2019-01-22 15:40:00 -05:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
58a2009cc1
Fix unix build
2019-01-18 12:52:27 -08:00
0318a9a9bc
More make_new fixes for unix build
2019-01-18 11:53:09 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
076ddfd66b
Merge pull request #1474 from ladyada/master
...
more pyportal pins
2019-01-16 11:11:56 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
91452ec9cb
Mention the MDK USB Dongle.
2019-01-15 21:24:36 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
ee410b2cf1
Merge branch 'master' into nrf52_pulsein
2019-01-10 10:54:40 +07:00
d3b8581ce0
fix merge conflicts; address some comments
2019-01-09 19:59:48 -05:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
d41ed768dc
Fix sphinx build issues; add better travis fold reporting; update author info
2019-01-09 16:22:19 -05:00
89af666093
fix sphinx complaint; more travis fold status reporting
2019-01-09 10:36:38 -05:00
f366e3feea
Merge branch 'master' into nrf52_pulsein
2019-01-09 20:39:35 +07:00
cfc4c8cbfa
minor clean up
2019-01-09 15:43:54 +07:00
db82160eef
fix pulsein incorrect compute
2019-01-09 15:15:30 +07:00
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
13d607698e
m_tx_in_progress might underflow (check on this)
2019-01-08 16:37:14 -05:00
50641c4152
remove debugging printf's
2019-01-08 15:52:21 -05:00
f66f55b4ed
add CharacteristicBuffer; UART seems to work!
2019-01-07 22:46:20 -05:00
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
215008f78c
clean up neopixel write !!
2019-01-08 00:21:31 +07:00
a77b2363ef
evt handler list bugs; unique evt handler names; remove uuid128_reference
2019-01-03 21:42:42 -05:00
8dea6f53bb
forgot to store data when reading a gatts value
2019-01-03 14:16:41 -05:00
87c6f33bcc
Broadcaster now takes whole packet. Also should be scannable
2019-01-01 14:11:59 -05:00
941ccf87c8
don't free event handler list manually; let gc do it
2018-12-31 09:02:43 -05:00
b6b5ed9c89
Remove nRF52832 support
2018-12-30 22:49:20 -05:00
1dc3957e72
LocalPeripheral is now Peripheral; more work on basic GATTS support; UART not working yet
2018-12-30 22:33:49 -05:00
ef39e72c7c
free event handlers on reset; fix typo in Broadcaster
2018-12-29 13:55:10 -05:00
de7cadb9b2
fix typos in internal_flash.c
2018-12-29 00:08:04 -05:00
145e110915
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-29 00:00:39 -05:00
4d1f0ec07b
Add Broadcaster. Reset correctly on reload.
2018-12-28 23:34:23 -05:00
6b0d93cea3
correct i2c max len
2018-12-28 21:14:27 +07:00
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits)
2018-12-28 16:30:11 +07:00
3ee766bc01
put received bytes to fifo when error
2018-12-28 01:05:30 +07:00
d092722ae8
fix #1407 keep receiving in case of error
2018-12-28 00:40:29 +07:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
f5b15c9b4d
Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev
2018-12-21 21:28:24 -05:00
0dfe2dbff0
return error status on more routines; minor simplification of freq setting
2018-12-21 12:30:54 -05:00
bce6d124af
Don't check for corrupt heap too early; Fix QSPI timing
2018-12-20 21:28:36 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
6752266673
added pulsein using gpiote (gpio interrupt)
2018-12-18 22:05:17 +07:00
bfa66861ef
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-13 16:33:15 -05:00
b37b2fa7e7
overwrite old data if fifo is full
2018-12-13 23:56:06 +07:00
e136222ae2
use rbuf for busio uart
2018-12-13 23:48:53 +07:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
70939ad517
Merge pull request #1395 from jerryneedell/jerryn_cpython
...
enable MICROPY_CPYTHON_COMPAT
2018-12-11 10:54:17 -08:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
1dc4c4757e
touchio.TouchIn sensing working on a single pin! adafruit/circuitpython#1048
2018-12-11 14:33:35 +11:00
a90343022a
enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds
2018-12-10 16:35:40 -05:00
901db4797e
progress on NRF touchio.TouchIn #1048
2018-12-09 16:48:33 +11:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
a7a24096f4
bleio WIP: redo for more immutability; use sd_* routines for internal flash write
2018-12-07 16:52:47 -05:00
df84da5913
Stub out serial_write as well
2018-12-07 09:32:37 -08:00
808ca676b6
Fix unix
2018-12-06 17:12:30 -08:00
332ea8853f
Macro guard VDDH inclusion.
2018-12-06 16:38:14 -08:00
817766acdc
Use the stub for ESP8266 as well.
2018-12-06 15:47:16 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
125901e4e2
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-06 12:41:38 -05:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
452a622459
Set up structure for touchio adafruit/circuitpython#1048 (does nothing yet)
2018-12-04 17:12:02 +11:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
3fa8796668
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 15:01:03 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
09316b35d7
remove non-broken-out nrf pins. re-organize pins.c list.
2018-11-30 14:58:36 -07:00
6e15ab6385
Stop ignoring SD hex files and improve the error when its missing.
2018-11-30 13:26:12 -08:00
df18d22a93
Capture stderr as well and work on nRF build
2018-11-30 12:59:05 -08:00
f67814fc97
Adding SparkFun nRF52840 Mini board support.
2018-11-30 13:57:22 -07:00
cf70dc4f1c
Fix BLE build
2018-11-30 11:53:33 -08:00
56345ff997
A few tweaks based on review feedback
2018-11-30 10:58:27 -08:00
9d07e95351
Add support for adding release info into adafruit/circuitpython-org
...
This also changes the build script to python with better output.
2018-11-30 00:30:57 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
3164b16196
WIP: debug; add hash and __eq__ to UUID
2018-11-26 21:09:17 -05:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
6fb7590280
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-11-26 10:16:29 -05:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
52fd151c9c
ports/nrf: enable json module on nrf boards generally
2018-11-22 10:35:57 -06:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
1763ffe245
More UUID work; use mp_raise for exceptions
2018-11-20 23:04:58 -05:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
31cc71f7fb
WIP: bleio revisions
2018-11-20 09:36:45 -05:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
b67c53edfa
Factor out of external flash as well.
...
Plus some cleanup.
Fixes #1324
2018-11-14 18:30:47 -08:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
47212ee31e
start debug
2018-11-14 17:21:48 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
f24c225664
Merge pull request #1312 from dhalbert/adafruit_nrfx
...
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-11-04 11:42:12 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
e203ce9ce5
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-10-31 23:18:59 -04:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
554f82fe9b
Merge pull request #1286 from klardotsh/topic-nrf52840-mdk
...
Add support for MakerDiary nRF52840 MDK board
2018-10-22 17:47:14 -07:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
4bc24c4f60
bleio: Fix errors after rebase
2018-10-21 17:15:27 +02:00
eceb21a017
bleio: Don't register the services until needed
...
Because of the very specific way nRF requires service registration
(characteristics can be added only to last added service), we would
have to write the Python code in a specific way. With this patch the
user has more freedom.
2018-10-21 16:00:04 +02:00
19fab4af5a
bleio: Remove deep copy constructor for UUID
2018-10-21 15:59:50 +02:00
b5e5805bb4
bleio: Remove redundant struct field
2018-10-21 15:59:46 +02:00
c7b42d80b3
bleio: A bit of cleanup
2018-10-21 15:59:42 +02:00
cf79316002
nrf: Fix ble uart using the new API
2018-10-21 15:59:36 +02:00
d5a71a4b8a
nrf: Move bluetooth driver to the 'bluetooth' folder
2018-10-21 15:55:25 +02:00
17f13ecc2c
nrf: Cleanup of the ble driver
...
Moved the functions to classes that they belong to.
2018-10-21 15:54:13 +02:00
77eeecbfd9
nrf: BLE driver cleanup
2018-10-21 15:52:36 +02:00
6545aa99a9
nrf: Remove the ble drv specific characteristic struct
2018-10-21 15:51:04 +02:00
98aa8c5923
nrf: Remove the ble drv specific service struct
2018-10-21 15:51:01 +02:00
3df7dea2cc
nrf: Remove the ble drv specific advertisement data struct
2018-10-21 15:50:59 +02:00
4b344812bf
nrf: Remove the ble drv specific address struct
2018-10-21 15:50:56 +02:00
3bd65fbae5
nrf: Move the Peripheral class to bleio as Device
...
This was the last class from ubluepy and so that module is now gone.
The Device class offers both Peripheral and Central functionality.
See the inline docs for more info.
2018-10-21 15:50:45 +02:00
bda734223e
nrf: Move the Service class from ubluepy to the shared bleio module
2018-10-21 15:43:51 +02:00
cc78249226
nrf: Move the Characteristic class from ubluepy to the shared bleio module
2018-10-21 15:43:48 +02:00
61bf4a16a7
nrf: Remove unused ubluepy classes
2018-10-21 15:43:39 +02:00
1c6bf9a150
bleio: Move the Scanner class to a shared module
2018-10-21 15:43:29 +02:00
7390dc7dab
bleio: Move ScanEntry to shared module and add a new AdvertisementData class
2018-10-21 15:43:24 +02:00
345334aaf1
bleio: Add a new Address class
...
Use the new in the Adapter singleton.
2018-10-21 15:43:21 +02:00
d5f942a971
bleio: Add a AddressType enum-like class
2018-10-21 15:43:17 +02:00
20b8d5169d
nrf: Move the Descriptor class from ubluepy to the shared bleio module
2018-10-21 15:43:13 +02:00
f4940c9aec
nrf: Move the UUID class from ubluepy to the shared bleio module
...
Also added a UUIDType enum-like class for determining UUID type.
2018-10-21 15:43:08 +02:00
aefabc5353
Update docs to reflect proper size of device
2018-10-20 03:29:20 -07:00
4c75a60bd3
Declobber a DEFINE
2018-10-20 02:57:17 -07:00
16ca9c8c7c
Makefile fixes and some docs
2018-10-20 02:43:13 -07:00
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK
2018-10-20 02:43:12 -07:00
Jeff Epler
Jeff Epler
Lucian Copeland
Sabas
sabas1080
Scott Shawcroft
Max Holliday
arturo182
Sean Cross
Scott Shawcroft
Brian Dean
Jeff Epler
Thea Flowers
siddacious
Chris Burton
William Moser
jgillick
Szymon Klause
TG-Techie
Dan Halbert
TG-Techie
Dan Halbert
Dave Marples
ladyada
Florent Gallaire
Drew Fustini
neubauek
James Bowman
Michael Welling
Wojtek Siudzinski
ndgarage
Lucian Copeland
Chris Osterwood
Benny Meisels
dalegrover
Joey Castillo
scs217
Kamil Tomaszewski
Roy Hooper
Radomir Dopieralski
Marius-450
hathach
Jerry Needell
JoeBakalor
KalbeAbbas
iot49
Thomas Sarlandie
wallarug
Cedar Grove Maker Studios
KalbeAbbas
☒ Bjarke Gotfredsen
brentru
Thea Flowers
ProductDev
kamtom480
Melissa LeBlanc-Williams
Kattni Rembor
sommersoft
Dave Astels
jepler
Keith Packard
sommersoft
Tavish Naruka
Carl Elkins
jandjstudios
Anthony DiGirolamo
shazz
Elvis Pfützenreuter
sabas1080
ladyada
Carlos
ITACA Innovation S.R.L
Nick Moore
siddacious
Damiano Mazzella
Melissa LeBlanc-Williams
Justin R. Cutler
John Reese
caternuson
Noralf Trønnes
Elias Santistevan
ShawnHymel
Lars Kellogg-Stedman
Gregory P. Smith
dsiee
jimblom
Benjamin Shockley
ATMakersBill
Josh Klar
Josh Klar