Merge remote-tracking branch 'adafruit/master' into fix_cpx_display

ports/atmel-samd/boards/hallowing_m0_express/board.c

@@ -26,9 +26,11 @@
 
 #include "boards/board.h"
 
+#include "shared-bindings/board/__init__.h"
 #include "shared-bindings/displayio/FourWire.h"
 #include "shared-module/displayio/__init__.h"
 #include "shared-module/displayio/mipi_constants.h"
+#include "shared-bindings/busio/SPI.h"
 
 #include "tick.h"
 
@@ -71,8 +73,10 @@ uint8_t display_init_sequence[] = {
 void board_init(void) {
     displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
     bus->base.type = &displayio_fourwire_type;
+    busio_spi_obj_t *spi = common_hal_board_create_spi();
+    common_hal_busio_spi_configure(spi, 12000000, 0, 0, 8);
     common_hal_displayio_fourwire_construct(bus,
-        common_hal_board_create_spi(),
+        spi,
         &pin_PA28, // Command or data
         &pin_PA01, // Chip select
         &pin_PA27); // Reset

ports/atmel-samd/common-hal/busio/SPI.c

@@ -361,3 +361,13 @@ bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, uint8_t *data_out, uin
 uint32_t common_hal_busio_spi_get_frequency(busio_spi_obj_t* self) {
     return samd_peripherals_spi_baud_reg_value_to_baudrate(hri_sercomspi_read_BAUD_reg(self->spi_desc.dev.prvt));
 }
+
+uint8_t common_hal_busio_spi_get_phase(busio_spi_obj_t* self) {
+    void * hw = self->spi_desc.dev.prvt;
+    return hri_sercomspi_get_CTRLA_CPHA_bit(hw);
+}
+
+uint8_t common_hal_busio_spi_get_polarity(busio_spi_obj_t* self) {
+    void * hw = self->spi_desc.dev.prvt;
+    return hri_sercomspi_get_CTRLA_CPOL_bit(hw);
+}

ports/nrf/common-hal/busio/SPI.c

@@ -327,3 +327,11 @@ uint32_t common_hal_busio_spi_get_frequency(busio_spi_obj_t* self) {
         return 0;
     }
 }
+
+uint8_t common_hal_busio_spi_get_phase(busio_spi_obj_t* self) {
+    return 0;
+}
+
+uint8_t common_hal_busio_spi_get_polarity(busio_spi_obj_t* self) {
+    return 0;
+}

shared-bindings/busio/SPI.h

@@ -61,6 +61,12 @@ extern bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, uint8_t *data_o
 // Return actual SPI bus frequency.
 uint32_t common_hal_busio_spi_get_frequency(busio_spi_obj_t* self);
 
+// Return SPI bus phase.
+uint8_t common_hal_busio_spi_get_phase(busio_spi_obj_t* self);
+
+// Return SPI bus polarity.
+uint8_t common_hal_busio_spi_get_polarity(busio_spi_obj_t* self);
+
 // This is used by the supervisor to claim SPI devices indefinitely.
 extern void common_hal_busio_spi_never_reset(busio_spi_obj_t *self);
 

shared-bindings/displayio/Display.c

@@ -295,6 +295,25 @@ const mp_obj_property_t displayio_display_height_obj = {
               (mp_obj_t)&mp_const_none_obj},
 };
 
+//|   .. attribute:: bus
+//|
+//|	The bus being used by the display
+//|
+//|
+STATIC mp_obj_t displayio_display_obj_get_bus(mp_obj_t self_in) {
+    displayio_display_obj_t *self = MP_OBJ_TO_PTR(self_in);
+    return self->bus;
+}
+MP_DEFINE_CONST_FUN_OBJ_1(displayio_display_get_bus_obj, displayio_display_obj_get_bus);
+
+const mp_obj_property_t displayio_display_bus_obj = {
+    .base.type = &mp_type_property,
+    .proxy = {(mp_obj_t)&displayio_display_get_bus_obj,
+              (mp_obj_t)&mp_const_none_obj,
+              (mp_obj_t)&mp_const_none_obj},
+};
+
+
 STATIC const mp_rom_map_elem_t displayio_display_locals_dict_table[] = {
     { MP_ROM_QSTR(MP_QSTR_show), MP_ROM_PTR(&displayio_display_show_obj) },
     { MP_ROM_QSTR(MP_QSTR_refresh_soon), MP_ROM_PTR(&displayio_display_refresh_soon_obj) },
@@ -305,6 +324,7 @@ STATIC const mp_rom_map_elem_t displayio_display_locals_dict_table[] = {
 
     { MP_ROM_QSTR(MP_QSTR_width), MP_ROM_PTR(&displayio_display_width_obj) },
     { MP_ROM_QSTR(MP_QSTR_height), MP_ROM_PTR(&displayio_display_height_obj) },
+    { MP_ROM_QSTR(MP_QSTR_bus), MP_ROM_PTR(&displayio_display_bus_obj) },
 };
 STATIC MP_DEFINE_CONST_DICT(displayio_display_locals_dict, displayio_display_locals_dict_table);
 

shared-module/displayio/FourWire.c

@@ -41,8 +41,14 @@ void common_hal_displayio_fourwire_construct(displayio_fourwire_obj_t* self,
 
     self->bus = spi;
     common_hal_busio_spi_never_reset(self->bus);
+    // Our object is statically allocated off the heap so make sure the bus object lives to the end
+    // of the heap as well.
     gc_never_free(self->bus);
 
+    self->frequency = common_hal_busio_spi_get_frequency(spi);
+    self->polarity = common_hal_busio_spi_get_polarity(spi);
+    self->phase = common_hal_busio_spi_get_phase(spi);
+
     common_hal_digitalio_digitalinout_construct(&self->command, command);
     common_hal_digitalio_digitalinout_switch_to_output(&self->command, true, DRIVE_MODE_PUSH_PULL);
     common_hal_digitalio_digitalinout_construct(&self->chip_select, chip_select);
@@ -73,8 +79,8 @@ bool common_hal_displayio_fourwire_begin_transaction(mp_obj_t obj) {
     if (!common_hal_busio_spi_try_lock(self->bus)) {
         return false;
     }
-    // TODO(tannewt): Stop hardcoding SPI frequency, polarity and phase.
-    common_hal_busio_spi_configure(self->bus, 12000000, 0, 0, 8);
+    common_hal_busio_spi_configure(self->bus, self->frequency, self->polarity,
+                                   self->phase, 8);
     common_hal_digitalio_digitalinout_set_value(&self->chip_select, false);
     return true;
 }

shared-module/displayio/FourWire.h

@@ -38,6 +38,9 @@ typedef struct {
     digitalio_digitalinout_obj_t command;
     digitalio_digitalinout_obj_t chip_select;
     digitalio_digitalinout_obj_t reset;
+    uint32_t frequency;
+    uint8_t polarity;
+    uint8_t phase;
 } displayio_fourwire_obj_t;
 
 #endif // MICROPY_INCLUDED_ATMEL_SAMD_COMMON_HAL_DISPLAYIO_FOURWIRE_H