Merge pull request #2046 from brentru/add-pyportal-titano
Add PyPortal Titano
This commit is contained in:
Scott Shawcroft
GitHub
commit
583392a5c6
@ -25,7 +25,7 @@ env:
|
||||
- TRAVIS_BOARDS="metro_m0_express metro_m4_express metro_m4_airlift_lite pirkey_m0 trellis_m4_express trinket_m0 sparkfun_lumidrive sparkfun_redboard_turbo bast_pro_mini_m0 datum_distance pyruler" TRAVIS_SDK=arm
|
||||
- TRAVIS_BOARDS="cp32-m4 feather_radiofruit_zigbee gemma_m0 hallowing_m0_express itsybitsy_m0_express itsybitsy_m4_express meowmeow sam32 uchip escornabot_makech pygamer_advance datum_imu snekboard" TRAVIS_SDK=arm
|
||||
- TRAVIS_BOARDS="feather_m0_supersized feather_m0_express_crickit feather_m0_rfm69 feather_m0_rfm9x feather_m4_express arduino_zero arduino_mkr1300 arduino_mkrzero pewpew10 kicksat-sprite ugame10 robohatmm1_m0 robohatmm1_m4 datum_light" TRAVIS_SDK=arm
|
||||
- TRAVIS_BOARDS="datalore_ip_m4 circuitplayground_express_crickit feather_m0_adalogger feather_m0_basic feather_m0_express catwan_usbstick pyportal sparkfun_samd21_mini sparkfun_samd21_dev pybadge pybadge_airlift datum_weather" TRAVIS_SDK=arm
|
||||
- TRAVIS_BOARDS="datalore_ip_m4 circuitplayground_express_crickit feather_m0_adalogger feather_m0_basic feather_m0_express catwan_usbstick pyportal sparkfun_samd21_mini sparkfun_samd21_dev pybadge pybadge_airlift datum_weather pyportal_titano" TRAVIS_SDK=arm
|
||||
|
||||
addons:
|
||||
artifacts:
|
||||
|
||||
129
ports/atmel-samd/boards/pyportal_titano/board.c
Normal file
129
ports/atmel-samd/boards/pyportal_titano/board.c
Normal file
@ -0,0 +1,129 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "boards/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "hal/include/hal_gpio.h"
|
||||
|
||||
#include "shared-bindings/busio/SPI.h"
|
||||
#include "shared-bindings/displayio/FourWire.h"
|
||||
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
#include "shared-module/displayio/mipi_constants.h"
|
||||
|
||||
#include "tick.h"
|
||||
|
||||
#define DELAY 0x80
|
||||
|
||||
uint8_t display_init_sequence[] = {
|
||||
0x01, DELAY, 100/5, // Soft reset, then delay 10 ms
|
||||
0xB9, 3, 0xFF, 0x83, 0x57, // Extension command set
|
||||
0xFF, DELAY, 500/5,
|
||||
0xB3, 4, 0x80, 0x00, 0x06, 0x06, // 0x80 enables SDO pin (0x00 disables)
|
||||
0xB6, 2, 0x01, 0x25, // -1.52V
|
||||
0xB0, 1, 0x68, // Normal mode 70Hz, Idle mode 55 Hz
|
||||
0xCC, 1, 0x05,
|
||||
0xB1, 6,
|
||||
0x00, // Not deep standby
|
||||
0x15, // BT
|
||||
0x1C, // VSPR
|
||||
0x1C, // VSNR
|
||||
0x83, // AP
|
||||
0xAA, // FS
|
||||
0xC0, 6,
|
||||
0x50, // OPON normal
|
||||
0x50, // OPON idle
|
||||
0x01, // STBA
|
||||
0x3C, // STBA
|
||||
0x1E, // STBA
|
||||
0x08, // GEN
|
||||
0xB4, 7,
|
||||
0x02, // NW 0x02
|
||||
0x40, // RTN
|
||||
0x00, // DIV
|
||||
0x2A, // DUM
|
||||
0x2A, // DUM
|
||||
0x0D, // GDON
|
||||
0x78, // GDOFF
|
||||
0xE0, 34,
|
||||
0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b,
|
||||
0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x02, 0x0A,
|
||||
0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A,
|
||||
0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01,
|
||||
0x3a, 1, 0x55,
|
||||
0x36, 1, 0x00,
|
||||
0x11, DELAY, 150/5, // Exit Sleep, then delay 150 ms
|
||||
0x29, DELAY, 50/5
|
||||
};
|
||||
|
||||
void board_init(void) {
|
||||
busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
|
||||
common_hal_busio_spi_construct(spi, &pin_PA13, &pin_PA12, &pin_PA14);
|
||||
common_hal_busio_spi_never_reset(spi);
|
||||
|
||||
displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
|
||||
bus->base.type = &displayio_fourwire_type;
|
||||
common_hal_displayio_fourwire_construct(bus,
|
||||
spi,
|
||||
&pin_PB05, // TFT_DC Command or data
|
||||
&pin_PB06, // TFT_CS Chip select
|
||||
&pin_PA00, // TFT_RST Reset
|
||||
24000000);
|
||||
|
||||
displayio_display_obj_t* display = &displays[0].display;
|
||||
display->base.type = &displayio_display_type;
|
||||
common_hal_displayio_display_construct(display,
|
||||
bus,
|
||||
480, // Width
|
||||
320, // Height
|
||||
0, // column start
|
||||
0, // row start
|
||||
270, // rotation
|
||||
16, // Color depth
|
||||
false, // grayscale
|
||||
false, // pixels_in_byte_share_row (unused for depths > 8)
|
||||
1, // bytes per cell. Only valid for depths < 8
|
||||
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
||||
MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
|
||||
MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
|
||||
MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
|
||||
0x37, // Set vertical scroll command
|
||||
display_init_sequence,
|
||||
sizeof(display_init_sequence),
|
||||
&pin_PB31, // Backlight pin
|
||||
NO_BRIGHTNESS_COMMAND,
|
||||
1.0f, // brightness (ignored)
|
||||
true, // auto_brightness
|
||||
false, // single_byte_bounds
|
||||
false); // data_as_commands
|
||||
}
|
||||
|
||||
bool board_requests_safe_mode(void) {
|
||||
return false;
|
||||
}
|
||||
|
||||
void reset_board(void) {
|
||||
}
|
||||
39
ports/atmel-samd/boards/pyportal_titano/mpconfigboard.h
Normal file
39
ports/atmel-samd/boards/pyportal_titano/mpconfigboard.h
Normal file
@ -0,0 +1,39 @@
|
||||
#define MICROPY_HW_BOARD_NAME "Adafruit PyPortal Titano"
|
||||
#define MICROPY_HW_MCU_NAME "samd51j20"
|
||||
|
||||
#define CIRCUITPY_MCU_FAMILY samd51
|
||||
|
||||
|
||||
#define MICROPY_HW_LED_STATUS (&pin_PA27)
|
||||
|
||||
#define MICROPY_HW_NEOPIXEL (&pin_PB22)
|
||||
|
||||
// These are pins not to reset.
|
||||
// QSPI Data pins
|
||||
#define MICROPY_PORT_A ( PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11 )
|
||||
// QSPI CS, and QSPI SCK
|
||||
#define MICROPY_PORT_B ( PORT_PB10 | PORT_PB11 | PORT_PB22 )
|
||||
#define MICROPY_PORT_C ( 0 )
|
||||
#define MICROPY_PORT_D (0)
|
||||
|
||||
#define AUTORESET_DELAY_MS 500
|
||||
|
||||
// If you change this, then make sure to update the linker scripts as well to
|
||||
// make sure you don't overwrite code
|
||||
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
|
||||
|
||||
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
|
||||
|
||||
#define DEFAULT_I2C_BUS_SCL (&pin_PB03)
|
||||
#define DEFAULT_I2C_BUS_SDA (&pin_PB02)
|
||||
|
||||
#define DEFAULT_SPI_BUS_SCK (&pin_PA13)
|
||||
#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
|
||||
#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_PB13)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_PB12)
|
||||
|
||||
// USB is always used internally so skip the pin objects for it.
|
||||
#define IGNORE_PIN_PA24 1
|
||||
#define IGNORE_PIN_PA25 1
|
||||
16
ports/atmel-samd/boards/pyportal_titano/mpconfigboard.mk
Normal file
16
ports/atmel-samd/boards/pyportal_titano/mpconfigboard.mk
Normal file
@ -0,0 +1,16 @@
|
||||
LD_FILE = boards/samd51x20-bootloader-external-flash.ld
|
||||
USB_VID = 0x239A
|
||||
USB_PID = 0x8054
|
||||
USB_PRODUCT = "PyPortal Titano"
|
||||
USB_MANUFACTURER = "Adafruit Industries LLC"
|
||||
|
||||
CHIP_VARIANT = SAMD51J20A
|
||||
CHIP_FAMILY = samd51
|
||||
|
||||
QSPI_FLASH_FILESYSTEM = 1
|
||||
EXTERNAL_FLASH_DEVICE_COUNT = 2
|
||||
EXTERNAL_FLASH_DEVICES = "W25Q64JV_IQ, GD25Q64C"
|
||||
LONGINT_IMPL = MPZ
|
||||
|
||||
# No touch on SAMD51 yet
|
||||
CIRCUITPY_TOUCHIO = 0
|
||||
94
ports/atmel-samd/boards/pyportal_titano/pins.c
Normal file
94
ports/atmel-samd/boards/pyportal_titano/pins.c
Normal file
@ -0,0 +1,94 @@
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
#include "boards/board.h"
|
||||
#include "shared-module/displayio/__init__.h"
|
||||
|
||||
// This mapping only includes functional names because pins broken
|
||||
// out on connectors are labeled with their MCU name available from
|
||||
// microcontroller.pin.
|
||||
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER), MP_ROM_PTR(&pin_PA02) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_AUDIO_OUT), MP_ROM_PTR(&pin_PA02) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_PA02) }, // analog out/in
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SPEAKER_ENABLE), MP_ROM_PTR(&pin_PA27) },
|
||||
|
||||
// Light sensor
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LIGHT), MP_ROM_PTR(&pin_PA07) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_PA07) },
|
||||
|
||||
// STEMMA connectors
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_PA04) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_PA04) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_PA05) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_PA05) },
|
||||
|
||||
// Indicator LED
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_PB23) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_PB23) },
|
||||
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL),MP_ROM_PTR(&pin_PB22) },
|
||||
|
||||
// LCD pins
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RESET), MP_ROM_PTR(&pin_PA00) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RD), MP_ROM_PTR(&pin_PB04) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RS), MP_ROM_PTR(&pin_PB05) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB06) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_TE), MP_ROM_PTR(&pin_PB07) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_WR), MP_ROM_PTR(&pin_PB09) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB09) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TFT_BACKLIGHT), MP_ROM_PTR(&pin_PB31) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA0), MP_ROM_PTR(&pin_PA16) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA1), MP_ROM_PTR(&pin_PA17) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA2), MP_ROM_PTR(&pin_PA18) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA3), MP_ROM_PTR(&pin_PA19) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA4), MP_ROM_PTR(&pin_PA20) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA5), MP_ROM_PTR(&pin_PA21) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA6), MP_ROM_PTR(&pin_PA22) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_LCD_DATA7), MP_ROM_PTR(&pin_PA23) },
|
||||
|
||||
// Touch pins
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_YD), MP_ROM_PTR(&pin_PB00) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_XL), MP_ROM_PTR(&pin_PB01) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_YU), MP_ROM_PTR(&pin_PA06) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TOUCH_XR), MP_ROM_PTR(&pin_PB08) },
|
||||
|
||||
// ESP control
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_CS), MP_ROM_PTR(&pin_PB14) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_GPIO0), MP_ROM_PTR(&pin_PB15) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_BUSY), MP_ROM_PTR(&pin_PB16) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RESET), MP_ROM_PTR(&pin_PB17) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_ESP_RTS), MP_ROM_PTR(&pin_PA15) },
|
||||
|
||||
// UART
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB12) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB13) },
|
||||
|
||||
// SPI
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),MP_ROM_PTR(&pin_PA12) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCK),MP_ROM_PTR(&pin_PA13) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_MISO),MP_ROM_PTR(&pin_PA14) },
|
||||
|
||||
// I2C
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA),MP_ROM_PTR(&pin_PB02) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL),MP_ROM_PTR(&pin_PB03) },
|
||||
|
||||
// SD Card
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SD_CS),MP_ROM_PTR(&pin_PB30) },
|
||||
{ MP_OBJ_NEW_QSTR(MP_QSTR_SD_CARD_DETECT),MP_ROM_PTR(&pin_PA01) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
|
||||
|
||||
// TFT control pins
|
||||
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_LITE), MP_ROM_PTR(&pin_PB31)},
|
||||
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MOSI), MP_ROM_PTR(&pin_PA12)},
|
||||
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_SCK), MP_ROM_PTR(&pin_PA13)},
|
||||
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_MISO), MP_ROM_PTR(&pin_PA14)},
|
||||
{MP_OBJ_NEW_QSTR(MP_QSTR_TFT_RST), MP_ROM_PTR(&pin_PA00)},
|
||||
{MP_ROM_QSTR(MP_QSTR_TFT_CS), MP_ROM_PTR(&pin_PB06)},
|
||||
{MP_ROM_QSTR(MP_QSTR_TFT_DC), MP_ROM_PTR(&pin_PB05)},
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].display) },
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);
|
||||
Loading…
Reference in New Issue
Block a user