Add F405 support

This commit is contained in:
Hierophect 2019-09-23 11:59:14 -04:00
parent fd1a257df3
commit 60bb6acf38
17 changed files with 1361 additions and 250 deletions

View File

@ -88,22 +88,7 @@ else
### CFLAGS += -flto
endif
# C defines and other board specifics
ifeq ($(MCU_SUB_VARIANT), stm32f412zx)
C_DEFS = \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DSTM32F412Zx
endif
ifeq ($(MCU_SUB_VARIANT), stm32f411xe)
C_DEFS = \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DSTM32F411xE
endif
C_DEFS += -DMCU_PACKAGE=$(MCU_PACKAGE)
C_DEFS += -DMCU_PACKAGE=$(MCU_PACKAGE) -DUSE_HAL_DRIVER -DUSE_FULL_LL_DRIVER -D$(MCU_SUB_VARIANT)
CFLAGS += $(INC) -Werror -Wall -std=gnu11 -nostdlib $(BASE_CFLAGS) $(C_DEFS) $(CFLAGS_MOD) $(COPT)

View File

@ -0,0 +1,109 @@
/*
GNU linker script for STM32F405 via Micropython
*/
/* Specify the memory areas */
MEMORY
{
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K /* entire flash */
FLASH_ISR (rx) : ORIGIN = 0x08000000, LENGTH = 16K /* sector 0 */
FLASH_FS (rx) : ORIGIN = 0x08004000, LENGTH = 48K /* sectors 1,2,3 are 16K */
FLASH_TEXT (rx) : ORIGIN = 0x08010000, LENGTH = 960K /* sector 4 is 64K, sectors 5,6,7 are 128K */
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
}
/* produce a link error if there is not this amount of RAM for these sections */
_minimum_stack_size = 2K;
_minimum_heap_size = 16K;
/* Define tho top end of the stack. The stack is full descending so begins just
above last byte of RAM. Note that EABI requires the stack to be 8-byte
aligned for a call. */
_estack = ORIGIN(RAM) + LENGTH(RAM);
/* RAM extents for the garbage collector */
_ram_start = ORIGIN(RAM);
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
_heap_start = _ebss; /* heap starts just after statically allocated memory */
_heap_end = 0x2001c000; /* tunable */
ENTRY(Reset_Handler)
/* define output sections */
SECTIONS
{
/* The startup code goes first into FLASH */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
/* This first flash block is 16K annd the isr vectors only take up
about 400 bytes. Micropython pads this with files, but this didn't
work with the size of Circuitpython's ff object. */
. = ALIGN(4);
} >FLASH_ISR
/* The program code and other data goes into FLASH */
.text :
{
. = ALIGN(4);
*(.text*) /* .text* sections (code) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
/* *(.glue_7) */ /* glue arm to thumb code */
/* *(.glue_7t) */ /* glue thumb to arm code */
. = ALIGN(4);
_etext = .; /* define a global symbol at end of code */
} >FLASH_TEXT
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* This is the initialized data section
The program executes knowing that the data is in the RAM
but the loader puts the initial values in the FLASH (inidata).
It is one task of the startup to copy the initial values from FLASH to RAM. */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start; used by startup code in order to initialise the .data section in RAM */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end; used by startup code in order to initialise the .data section in RAM */
} >RAM AT> FLASH_TEXT
/* Uninitialized data section */
.bss :
{
. = ALIGN(4);
_sbss = .; /* define a global symbol at bss start; used by startup code */
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end; used by startup code and GC */
} >RAM
/* this is to define the start of the heap, and make sure we have a minimum size */
.heap :
{
. = ALIGN(4);
. = . + _minimum_heap_size;
. = ALIGN(4);
} >RAM
/* this just checks there is enough RAM for the stack */
.stack :
{
. = ALIGN(4);
. = . + _minimum_stack_size;
. = ALIGN(4);
} >RAM
.ARM.attributes 0 : { *(.ARM.attributes) }
}

View File

@ -0,0 +1,38 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "boards/board.h"
void board_init(void) {
}
bool board_requests_safe_mode(void) {
return false;
}
void reset_board(void) {
}

View File

@ -0,0 +1,37 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Glenn Ruben Bakke
* Copyright (c) 2018 Dan Halbert for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
//Micropython setup
#define MICROPY_HW_BOARD_NAME "PyboardV1_1"
#define MICROPY_HW_MCU_NAME "STM32F405RG"
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (0x4000)
#define AUTORESET_DELAY_MS 500
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000)

View File

@ -0,0 +1,17 @@
USB_VID = 0x239A
USB_PID = 0x8056
USB_PRODUCT = "Pyboard Version 1.1"
USB_MANUFACTURER = "STMicroelectronics"
INTERNAL_FLASH_FILESYSTEM = 1
LONGINT_IMPL = NONE
MCU_SERIES = m4
MCU_VARIANT = stm32f4
MCU_SUB_VARIANT = stm32f405xx
MCU_PACKAGE = 64
CMSIS_MCU = STM32F405xx
LD_FILE = boards/STM32F405.ld
TEXT0_ADDR = 0x08000000
TEXT1_ADDR = 0x08020000

View File

@ -0,0 +1,53 @@
#include "shared-bindings/board/__init__.h"
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_Y1), MP_ROM_PTR(&pin_PC06) },
{ MP_ROM_QSTR(MP_QSTR_Y2), MP_ROM_PTR(&pin_PC07) },
{ MP_ROM_QSTR(MP_QSTR_Y3), MP_ROM_PTR(&pin_PB08) },
{ MP_ROM_QSTR(MP_QSTR_Y4), MP_ROM_PTR(&pin_PB09) },
{ MP_ROM_QSTR(MP_QSTR_Y5), MP_ROM_PTR(&pin_PB12) },
{ MP_ROM_QSTR(MP_QSTR_Y6), MP_ROM_PTR(&pin_PB13) },
{ MP_ROM_QSTR(MP_QSTR_Y7), MP_ROM_PTR(&pin_PB14) },
{ MP_ROM_QSTR(MP_QSTR_Y8), MP_ROM_PTR(&pin_PB15) },
{ MP_ROM_QSTR(MP_QSTR_Y9), MP_ROM_PTR(&pin_PB10) },
{ MP_ROM_QSTR(MP_QSTR_Y10), MP_ROM_PTR(&pin_PB11) },
{ MP_ROM_QSTR(MP_QSTR_Y11), MP_ROM_PTR(&pin_PB00) },
{ MP_ROM_QSTR(MP_QSTR_Y12), MP_ROM_PTR(&pin_PB01) },
{ MP_ROM_QSTR(MP_QSTR_X1), MP_ROM_PTR(&pin_PA00) },
{ MP_ROM_QSTR(MP_QSTR_X2), MP_ROM_PTR(&pin_PA01) },
{ MP_ROM_QSTR(MP_QSTR_X3), MP_ROM_PTR(&pin_PA02) },
{ MP_ROM_QSTR(MP_QSTR_X4), MP_ROM_PTR(&pin_PA03) },
{ MP_ROM_QSTR(MP_QSTR_X5), MP_ROM_PTR(&pin_PA04) },
{ MP_ROM_QSTR(MP_QSTR_X6), MP_ROM_PTR(&pin_PA05) },
{ MP_ROM_QSTR(MP_QSTR_X7), MP_ROM_PTR(&pin_PA06) },
{ MP_ROM_QSTR(MP_QSTR_X8), MP_ROM_PTR(&pin_PA07) },
{ MP_ROM_QSTR(MP_QSTR_X9), MP_ROM_PTR(&pin_PB06) },
{ MP_ROM_QSTR(MP_QSTR_X10), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_X11), MP_ROM_PTR(&pin_PC04) },
{ MP_ROM_QSTR(MP_QSTR_X12), MP_ROM_PTR(&pin_PC05) },
{ MP_ROM_QSTR(MP_QSTR_X17), MP_ROM_PTR(&pin_PB03) },
{ MP_ROM_QSTR(MP_QSTR_X18), MP_ROM_PTR(&pin_PC13) },
{ MP_ROM_QSTR(MP_QSTR_X19), MP_ROM_PTR(&pin_PC00) },
{ MP_ROM_QSTR(MP_QSTR_X20), MP_ROM_PTR(&pin_PC01) },
{ MP_ROM_QSTR(MP_QSTR_X21), MP_ROM_PTR(&pin_PC02) },
{ MP_ROM_QSTR(MP_QSTR_X22), MP_ROM_PTR(&pin_PC03) },
{ MP_ROM_QSTR(MP_QSTR_P2), MP_ROM_PTR(&pin_PB04) },
{ MP_ROM_QSTR(MP_QSTR_P3), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_P4), MP_ROM_PTR(&pin_PA14) },
{ MP_ROM_QSTR(MP_QSTR_P5), MP_ROM_PTR(&pin_PA13) },
{ MP_ROM_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PB04) },
{ MP_ROM_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PA15) },
{ MP_ROM_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PA14) },
{ MP_ROM_QSTR(MP_QSTR_LED4), MP_ROM_PTR(&pin_PA13) },
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB06) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB07) },
};
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

View File

@ -0,0 +1,439 @@
/**
******************************************************************************
* @file stm32f4xx_hal_conf_template.h
* @author MCD Application Team
* @brief HAL configuration template file.
* This file should be copied to the application folder and renamed
* to stm32f4xx_hal_conf.h.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_HAL_CONF_H
#define __STM32F4xx_HAL_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* ########################## Module Selection ############################## */
/**
* @brief This is the list of modules to be used in the HAL driver
*/
#define HAL_MODULE_ENABLED
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_CAN_MODULE_ENABLED */
/* #define HAL_CRC_MODULE_ENABLED */
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_PCCARD_MODULE_ENABLED */
#define HAL_SRAM_MODULE_ENABLED
/* #define HAL_SDRAM_MODULE_ENABLED */
/* #define HAL_HASH_MODULE_ENABLED */
#define HAL_I2C_MODULE_ENABLED
#define HAL_I2S_MODULE_ENABLED
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_RNG_MODULE_ENABLED */
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
#define HAL_SD_MODULE_ENABLED
/* #define HAL_MMC_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
/* #define HAL_SMARTCARD_MODULE_ENABLED */
/* #define HAL_WWDG_MODULE_ENABLED */
#define HAL_PCD_MODULE_ENABLED
/* #define HAL_HCD_MODULE_ENABLED */
/* #define HAL_DSI_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
#define HAL_QSPI_MODULE_ENABLED
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_FMPI2C_MODULE_ENABLED */
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_DFSDM_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_EXTI_MODULE_ENABLED */
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED
/* ########################## HSE/HSI Values adaptation ##################### */
/**
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSE is used as system clock source, directly or through the PLL).
*/
#if !defined (HSE_VALUE)
#define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */
#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */
/**
* @brief Internal High Speed oscillator (HSI) value.
* This value is used by the RCC HAL module to compute the system frequency
* (when HSI is used as system clock source, directly or through the PLL).
*/
#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */
/**
* @brief Internal Low Speed oscillator (LSI) value.
*/
#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature.*/
/**
* @brief External Low Speed oscillator (LSE) value.
*/
#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */
#endif /* LSE_VALUE */
#if !defined (LSE_STARTUP_TIMEOUT)
#define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */
/**
* @brief External clock source for I2S peripheral
* This value is used by the I2S HAL module to compute the I2S clock source
* frequency, this source is inserted directly through I2S_CKIN pad.
*/
#if !defined (EXTERNAL_CLOCK_VALUE)
#define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
/* ########################### System Configuration ######################### */
/**
* @brief This is the HAL system configuration section
*/
#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */
#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */
#define USE_RTOS 0U
#define PREFETCH_ENABLE 1U
#define INSTRUCTION_CACHE_ENABLE 1U
#define DATA_CACHE_ENABLE 1U
/* ########################## Assert Selection ############################## */
/**
* @brief Uncomment the line below to expanse the "assert_param" macro in the
* HAL drivers code
*/
/* #define USE_FULL_ASSERT 1U */
/* ################## Ethernet peripheral configuration ##################### */
/* Section 1 : Ethernet peripheral configuration */
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
#define MAC_ADDR0 2U
#define MAC_ADDR1 0U
#define MAC_ADDR2 0U
#define MAC_ADDR3 0U
#define MAC_ADDR4 0U
#define MAC_ADDR5 0U
/* Definition of the Ethernet driver buffers size and count */
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
/* Section 2: PHY configuration section */
/* DP83848_PHY_ADDRESS Address*/
#define DP83848_PHY_ADDRESS 0x01U
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
#define PHY_RESET_DELAY ((uint32_t)0x000000FFU)
/* PHY Configuration delay */
#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU)
#define PHY_READ_TO ((uint32_t)0x0000FFFFU)
#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU)
/* Section 3: Common PHY Registers */
#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */
#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */
#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */
#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */
#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */
#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */
#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */
#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */
/* Section 4: Extended PHY Registers */
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
/* ################## SPI peripheral configuration ########################## */
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
* Activated: CRC code is present inside driver
* Deactivated: CRC code cleaned from driver
*/
#define USE_SPI_CRC 0U
/* Includes ------------------------------------------------------------------*/
/**
* @brief Include module's header file
*/
#ifdef HAL_RCC_MODULE_ENABLED
#include "stm32f4xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */
#ifdef HAL_EXTI_MODULE_ENABLED
#include "stm32f4xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm32f4xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */
#ifdef HAL_DMA_MODULE_ENABLED
#include "stm32f4xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */
#ifdef HAL_CORTEX_MODULE_ENABLED
#include "stm32f4xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */
#ifdef HAL_ADC_MODULE_ENABLED
#include "stm32f4xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */
#ifdef HAL_CAN_MODULE_ENABLED
#include "stm32f4xx_hal_can.h"
#endif /* HAL_CAN_MODULE_ENABLED */
#ifdef HAL_CRC_MODULE_ENABLED
#include "stm32f4xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */
#ifdef HAL_CRYP_MODULE_ENABLED
#include "stm32f4xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */
#ifdef HAL_DMA2D_MODULE_ENABLED
#include "stm32f4xx_hal_dma2d.h"
#endif /* HAL_DMA2D_MODULE_ENABLED */
#ifdef HAL_DAC_MODULE_ENABLED
#include "stm32f4xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */
#ifdef HAL_DCMI_MODULE_ENABLED
#include "stm32f4xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */
#ifdef HAL_ETH_MODULE_ENABLED
#include "stm32f4xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */
#ifdef HAL_FLASH_MODULE_ENABLED
#include "stm32f4xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */
#ifdef HAL_NOR_MODULE_ENABLED
#include "stm32f4xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */
#ifdef HAL_NAND_MODULE_ENABLED
#include "stm32f4xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */
#ifdef HAL_PCCARD_MODULE_ENABLED
#include "stm32f4xx_hal_pccard.h"
#endif /* HAL_PCCARD_MODULE_ENABLED */
#ifdef HAL_SDRAM_MODULE_ENABLED
#include "stm32f4xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */
#ifdef HAL_HASH_MODULE_ENABLED
#include "stm32f4xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */
#ifdef HAL_I2C_MODULE_ENABLED
#include "stm32f4xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */
#ifdef HAL_I2S_MODULE_ENABLED
#include "stm32f4xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */
#ifdef HAL_IWDG_MODULE_ENABLED
#include "stm32f4xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */
#ifdef HAL_LTDC_MODULE_ENABLED
#include "stm32f4xx_hal_ltdc.h"
#endif /* HAL_LTDC_MODULE_ENABLED */
#ifdef HAL_PWR_MODULE_ENABLED
#include "stm32f4xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */
#ifdef HAL_RNG_MODULE_ENABLED
#include "stm32f4xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */
#ifdef HAL_RTC_MODULE_ENABLED
#include "stm32f4xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */
#ifdef HAL_SAI_MODULE_ENABLED
#include "stm32f4xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */
#ifdef HAL_SD_MODULE_ENABLED
#include "stm32f4xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */
#ifdef HAL_MMC_MODULE_ENABLED
#include "stm32f4xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */
#ifdef HAL_SPI_MODULE_ENABLED
#include "stm32f4xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */
#ifdef HAL_TIM_MODULE_ENABLED
#include "stm32f4xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */
#ifdef HAL_UART_MODULE_ENABLED
#include "stm32f4xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */
#ifdef HAL_USART_MODULE_ENABLED
#include "stm32f4xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */
#ifdef HAL_IRDA_MODULE_ENABLED
#include "stm32f4xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */
#ifdef HAL_SMARTCARD_MODULE_ENABLED
#include "stm32f4xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
#ifdef HAL_WWDG_MODULE_ENABLED
#include "stm32f4xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */
#ifdef HAL_PCD_MODULE_ENABLED
#include "stm32f4xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */
#ifdef HAL_HCD_MODULE_ENABLED
#include "stm32f4xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */
#ifdef HAL_DSI_MODULE_ENABLED
#include "stm32f4xx_hal_dsi.h"
#endif /* HAL_DSI_MODULE_ENABLED */
#ifdef HAL_QSPI_MODULE_ENABLED
#include "stm32f4xx_hal_qspi.h"
#endif /* HAL_QSPI_MODULE_ENABLED */
#ifdef HAL_CEC_MODULE_ENABLED
#include "stm32f4xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */
#ifdef HAL_FMPI2C_MODULE_ENABLED
#include "stm32f4xx_hal_fmpi2c.h"
#endif /* HAL_FMPI2C_MODULE_ENABLED */
#ifdef HAL_SPDIFRX_MODULE_ENABLED
#include "stm32f4xx_hal_spdifrx.h"
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
#ifdef HAL_DFSDM_MODULE_ENABLED
#include "stm32f4xx_hal_dfsdm.h"
#endif /* HAL_DFSDM_MODULE_ENABLED */
#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32f4xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */
/* Exported macro ------------------------------------------------------------*/
#ifdef USE_FULL_ASSERT
/**
* @brief The assert_param macro is used for function's parameters check.
* @param expr: If expr is false, it calls assert_failed function
* which reports the name of the source file and the source
* line number of the call that failed.
* If expr is true, it returns no value.
* @retval None
*/
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ------------------------------------------------------- */
void assert_failed(uint8_t* file, uint32_t line);
#else
#define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_HAL_CONF_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -0,0 +1,516 @@
/**
******************************************************************************
* @file startup_stm32f405xx.s
* @author MCD Application Team
* @brief STM32F405xx Devices vector table for GCC based toolchains.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M4 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2017 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
.syntax unified
.cpu cortex-m4
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
ldr sp, =_estack /* set stack pointer */
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the clock system intitialization function.*/
bl SystemInit
/* Call static constructors */
bl __libc_init_array
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
* @param None
* @retval None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
*******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word _estack
.word Reset_Handler
.word NMI_Handler
.word HardFault_Handler
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word PendSV_Handler
.word SysTick_Handler
/* External Interrupts */
.word WWDG_IRQHandler /* Window WatchDog */
.word PVD_IRQHandler /* PVD through EXTI Line detection */
.word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */
.word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */
.word FLASH_IRQHandler /* FLASH */
.word RCC_IRQHandler /* RCC */
.word EXTI0_IRQHandler /* EXTI Line0 */
.word EXTI1_IRQHandler /* EXTI Line1 */
.word EXTI2_IRQHandler /* EXTI Line2 */
.word EXTI3_IRQHandler /* EXTI Line3 */
.word EXTI4_IRQHandler /* EXTI Line4 */
.word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */
.word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */
.word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */
.word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */
.word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */
.word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */
.word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */
.word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */
.word CAN1_TX_IRQHandler /* CAN1 TX */
.word CAN1_RX0_IRQHandler /* CAN1 RX0 */
.word CAN1_RX1_IRQHandler /* CAN1 RX1 */
.word CAN1_SCE_IRQHandler /* CAN1 SCE */
.word EXTI9_5_IRQHandler /* External Line[9:5]s */
.word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */
.word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */
.word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */
.word TIM1_CC_IRQHandler /* TIM1 Capture Compare */
.word TIM2_IRQHandler /* TIM2 */
.word TIM3_IRQHandler /* TIM3 */
.word TIM4_IRQHandler /* TIM4 */
.word I2C1_EV_IRQHandler /* I2C1 Event */
.word I2C1_ER_IRQHandler /* I2C1 Error */
.word I2C2_EV_IRQHandler /* I2C2 Event */
.word I2C2_ER_IRQHandler /* I2C2 Error */
.word SPI1_IRQHandler /* SPI1 */
.word SPI2_IRQHandler /* SPI2 */
.word USART1_IRQHandler /* USART1 */
.word USART2_IRQHandler /* USART2 */
.word USART3_IRQHandler /* USART3 */
.word EXTI15_10_IRQHandler /* External Line[15:10]s */
.word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */
.word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */
.word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */
.word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */
.word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */
.word TIM8_CC_IRQHandler /* TIM8 Capture Compare */
.word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */
.word FSMC_IRQHandler /* FSMC */
.word SDIO_IRQHandler /* SDIO */
.word TIM5_IRQHandler /* TIM5 */
.word SPI3_IRQHandler /* SPI3 */
.word UART4_IRQHandler /* UART4 */
.word UART5_IRQHandler /* UART5 */
.word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */
.word TIM7_IRQHandler /* TIM7 */
.word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */
.word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */
.word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */
.word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */
.word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word CAN2_TX_IRQHandler /* CAN2 TX */
.word CAN2_RX0_IRQHandler /* CAN2 RX0 */
.word CAN2_RX1_IRQHandler /* CAN2 RX1 */
.word CAN2_SCE_IRQHandler /* CAN2 SCE */
.word OTG_FS_IRQHandler /* USB OTG FS */
.word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */
.word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */
.word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */
.word USART6_IRQHandler /* USART6 */
.word I2C3_EV_IRQHandler /* I2C3 event */
.word I2C3_ER_IRQHandler /* I2C3 error */
.word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */
.word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */
.word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */
.word OTG_HS_IRQHandler /* USB OTG HS */
.word 0 /* Reserved */
.word 0 /* Reserved */
.word HASH_RNG_IRQHandler /* Hash and Rng */
.word FPU_IRQHandler /* FPU */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak HardFault_Handler
.thumb_set HardFault_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak PendSV_Handler
.thumb_set PendSV_Handler,Default_Handler
.weak SysTick_Handler
.thumb_set SysTick_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMP_STAMP_IRQHandler
.thumb_set TAMP_STAMP_IRQHandler,Default_Handler
.weak RTC_WKUP_IRQHandler
.thumb_set RTC_WKUP_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Stream0_IRQHandler
.thumb_set DMA1_Stream0_IRQHandler,Default_Handler
.weak DMA1_Stream1_IRQHandler
.thumb_set DMA1_Stream1_IRQHandler,Default_Handler
.weak DMA1_Stream2_IRQHandler
.thumb_set DMA1_Stream2_IRQHandler,Default_Handler
.weak DMA1_Stream3_IRQHandler
.thumb_set DMA1_Stream3_IRQHandler,Default_Handler
.weak DMA1_Stream4_IRQHandler
.thumb_set DMA1_Stream4_IRQHandler,Default_Handler
.weak DMA1_Stream5_IRQHandler
.thumb_set DMA1_Stream5_IRQHandler,Default_Handler
.weak DMA1_Stream6_IRQHandler
.thumb_set DMA1_Stream6_IRQHandler,Default_Handler
.weak ADC_IRQHandler
.thumb_set ADC_IRQHandler,Default_Handler
.weak CAN1_TX_IRQHandler
.thumb_set CAN1_TX_IRQHandler,Default_Handler
.weak CAN1_RX0_IRQHandler
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_TIM9_IRQHandler
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
.weak TIM1_UP_TIM10_IRQHandler
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_TIM11_IRQHandler
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTC_Alarm_IRQHandler
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
.weak OTG_FS_WKUP_IRQHandler
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
.weak TIM8_BRK_TIM12_IRQHandler
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
.weak TIM8_UP_TIM13_IRQHandler
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_TIM14_IRQHandler
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak DMA1_Stream7_IRQHandler
.thumb_set DMA1_Stream7_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_DAC_IRQHandler
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Stream0_IRQHandler
.thumb_set DMA2_Stream0_IRQHandler,Default_Handler
.weak DMA2_Stream1_IRQHandler
.thumb_set DMA2_Stream1_IRQHandler,Default_Handler
.weak DMA2_Stream2_IRQHandler
.thumb_set DMA2_Stream2_IRQHandler,Default_Handler
.weak DMA2_Stream3_IRQHandler
.thumb_set DMA2_Stream3_IRQHandler,Default_Handler
.weak DMA2_Stream4_IRQHandler
.thumb_set DMA2_Stream4_IRQHandler,Default_Handler
.weak CAN2_TX_IRQHandler
.thumb_set CAN2_TX_IRQHandler,Default_Handler
.weak CAN2_RX0_IRQHandler
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
.weak CAN2_RX1_IRQHandler
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
.weak CAN2_SCE_IRQHandler
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
.weak OTG_FS_IRQHandler
.thumb_set OTG_FS_IRQHandler,Default_Handler
.weak DMA2_Stream5_IRQHandler
.thumb_set DMA2_Stream5_IRQHandler,Default_Handler
.weak DMA2_Stream6_IRQHandler
.thumb_set DMA2_Stream6_IRQHandler,Default_Handler
.weak DMA2_Stream7_IRQHandler
.thumb_set DMA2_Stream7_IRQHandler,Default_Handler
.weak USART6_IRQHandler
.thumb_set USART6_IRQHandler,Default_Handler
.weak I2C3_EV_IRQHandler
.thumb_set I2C3_EV_IRQHandler,Default_Handler
.weak I2C3_ER_IRQHandler
.thumb_set I2C3_ER_IRQHandler,Default_Handler
.weak OTG_HS_EP1_OUT_IRQHandler
.thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
.weak OTG_HS_EP1_IN_IRQHandler
.thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
.weak OTG_HS_WKUP_IRQHandler
.thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
.weak OTG_HS_IRQHandler
.thumb_set OTG_HS_IRQHandler,Default_Handler
.weak HASH_RNG_IRQHandler
.thumb_set HASH_RNG_IRQHandler,Default_Handler
.weak FPU_IRQHandler
.thumb_set FPU_IRQHandler,Default_Handler
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

View File

@ -37,6 +37,9 @@
#elif MCU_PACKAGE == 100
#define GPIO_PORT_COUNT 5
GPIO_TypeDef * ports[GPIO_PORT_COUNT] = {GPIOA, GPIOB, GPIOC, GPIOD, GPIOE};
#elif MCU_PACKAGE == 64
#define GPIO_PORT_COUNT 3
GPIO_TypeDef * ports[GPIO_PORT_COUNT] = {GPIOA, GPIOB, GPIOC};
#endif
STATIC uint16_t claimed_pins[GPIO_PORT_COUNT];

View File

@ -71,13 +71,15 @@ const mcu_processor_obj_t common_hal_mcu_processor_obj = {
};
STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
#if MCU_PACKAGE <= 100
{ MP_ROM_QSTR(MP_QSTR_PE02), MP_ROM_PTR(&pin_PE02) },
{ MP_ROM_QSTR(MP_QSTR_PE03), MP_ROM_PTR(&pin_PE03) },
{ MP_ROM_QSTR(MP_QSTR_PE04), MP_ROM_PTR(&pin_PE04) },
{ MP_ROM_QSTR(MP_QSTR_PE05), MP_ROM_PTR(&pin_PE05) },
{ MP_ROM_QSTR(MP_QSTR_PE06), MP_ROM_PTR(&pin_PE06) },
#endif
{ MP_ROM_QSTR(MP_QSTR_PC13), MP_ROM_PTR(&pin_PC13) },
#if MCU_PACKAGE == LQFP144
#if MCU_PACKAGE <= 144
{ MP_ROM_QSTR(MP_QSTR_PF00), MP_ROM_PTR(&pin_PF00) },
{ MP_ROM_QSTR(MP_QSTR_PF01), MP_ROM_PTR(&pin_PF01) },
{ MP_ROM_QSTR(MP_QSTR_PF02), MP_ROM_PTR(&pin_PF02) },
@ -107,7 +109,7 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PB00), MP_ROM_PTR(&pin_PB00) },
{ MP_ROM_QSTR(MP_QSTR_PB01), MP_ROM_PTR(&pin_PB01) },
{ MP_ROM_QSTR(MP_QSTR_PB02), MP_ROM_PTR(&pin_PB02) },
#if MCU_PACKAGE == LQFP144
#if MCU_PACKAGE == 144
{ MP_ROM_QSTR(MP_QSTR_PF11), MP_ROM_PTR(&pin_PF11) },
{ MP_ROM_QSTR(MP_QSTR_PF12), MP_ROM_PTR(&pin_PF12) },
{ MP_ROM_QSTR(MP_QSTR_PF13), MP_ROM_PTR(&pin_PF13) },
@ -116,6 +118,7 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PG00), MP_ROM_PTR(&pin_PG00) },
{ MP_ROM_QSTR(MP_QSTR_PG01), MP_ROM_PTR(&pin_PG01) },
#endif
#if MCU_PACKAGE <= 100
{ MP_ROM_QSTR(MP_QSTR_PE07), MP_ROM_PTR(&pin_PE07) },
{ MP_ROM_QSTR(MP_QSTR_PE08), MP_ROM_PTR(&pin_PE08) },
{ MP_ROM_QSTR(MP_QSTR_PE09), MP_ROM_PTR(&pin_PE09) },
@ -125,14 +128,16 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PE13), MP_ROM_PTR(&pin_PE13) },
{ MP_ROM_QSTR(MP_QSTR_PE14), MP_ROM_PTR(&pin_PE14) },
{ MP_ROM_QSTR(MP_QSTR_PE15), MP_ROM_PTR(&pin_PE15) },
#endif
{ MP_ROM_QSTR(MP_QSTR_PB10), MP_ROM_PTR(&pin_PB10) },
#if MCU_PACKAGE == LQFP144
#if MCU_PACKAGE != 144
{ MP_ROM_QSTR(MP_QSTR_PB11), MP_ROM_PTR(&pin_PB11) },
#endif
{ MP_ROM_QSTR(MP_QSTR_PB12), MP_ROM_PTR(&pin_PB12) },
{ MP_ROM_QSTR(MP_QSTR_PB13), MP_ROM_PTR(&pin_PB13) },
{ MP_ROM_QSTR(MP_QSTR_PB14), MP_ROM_PTR(&pin_PB14) },
{ MP_ROM_QSTR(MP_QSTR_PB15), MP_ROM_PTR(&pin_PB15) },
#if MCU_PACKAGE <= 100
{ MP_ROM_QSTR(MP_QSTR_PD08), MP_ROM_PTR(&pin_PD08) },
{ MP_ROM_QSTR(MP_QSTR_PD09), MP_ROM_PTR(&pin_PD09) },
{ MP_ROM_QSTR(MP_QSTR_PD10), MP_ROM_PTR(&pin_PD10) },
@ -141,7 +146,8 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PD13), MP_ROM_PTR(&pin_PD13) },
{ MP_ROM_QSTR(MP_QSTR_PD14), MP_ROM_PTR(&pin_PD14) },
{ MP_ROM_QSTR(MP_QSTR_PD15), MP_ROM_PTR(&pin_PD15) },
#if MCU_PACKAGE == LQFP144
#endif
#if MCU_PACKAGE == 144
{ MP_ROM_QSTR(MP_QSTR_PG02), MP_ROM_PTR(&pin_PG02) },
{ MP_ROM_QSTR(MP_QSTR_PG03), MP_ROM_PTR(&pin_PG03) },
{ MP_ROM_QSTR(MP_QSTR_PG04), MP_ROM_PTR(&pin_PG04) },
@ -165,6 +171,7 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PC10), MP_ROM_PTR(&pin_PC10) },
{ MP_ROM_QSTR(MP_QSTR_PC11), MP_ROM_PTR(&pin_PC11) },
{ MP_ROM_QSTR(MP_QSTR_PC12), MP_ROM_PTR(&pin_PC12) },
#if MCU_PACKAGE <= 100
{ MP_ROM_QSTR(MP_QSTR_PD00), MP_ROM_PTR(&pin_PD00) },
{ MP_ROM_QSTR(MP_QSTR_PD01), MP_ROM_PTR(&pin_PD01) },
{ MP_ROM_QSTR(MP_QSTR_PD02), MP_ROM_PTR(&pin_PD02) },
@ -173,7 +180,8 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PD05), MP_ROM_PTR(&pin_PD05) },
{ MP_ROM_QSTR(MP_QSTR_PD06), MP_ROM_PTR(&pin_PD06) },
{ MP_ROM_QSTR(MP_QSTR_PD07), MP_ROM_PTR(&pin_PD07) },
#if MCU_PACKAGE == LQFP144
#endif
#if MCU_PACKAGE == 144
{ MP_ROM_QSTR(MP_QSTR_PG09), MP_ROM_PTR(&pin_PG09) },
{ MP_ROM_QSTR(MP_QSTR_PG10), MP_ROM_PTR(&pin_PG10) },
{ MP_ROM_QSTR(MP_QSTR_PG11), MP_ROM_PTR(&pin_PG11) },
@ -189,7 +197,9 @@ STATIC const mp_rom_map_elem_t mcu_pin_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_PB07), MP_ROM_PTR(&pin_PB07) },
{ MP_ROM_QSTR(MP_QSTR_PB08), MP_ROM_PTR(&pin_PB08) },
{ MP_ROM_QSTR(MP_QSTR_PB09), MP_ROM_PTR(&pin_PB09) },
#if MCU_PACKAGE <= 100
{ MP_ROM_QSTR(MP_QSTR_PE00), MP_ROM_PTR(&pin_PE00) },
{ MP_ROM_QSTR(MP_QSTR_PE01), MP_ROM_PTR(&pin_PE01) },
#endif
};
MP_DEFINE_CONST_DICT(mcu_pin_globals, mcu_pin_globals_table);

View File

@ -65,10 +65,13 @@ typedef struct {
// TODO: SPI, UART, etc
// Choose based on chip
#ifdef STM32F412Zx
#ifdef stm32f412zx
#include "stm32f412zx/periph.h"
#endif
#ifdef STM32F411xE
#ifdef stm32f411xe
#include "stm32f411xe/periph.h"
#endif
#ifdef stm32f405xx
#include "stm32f405xx/periph.h"
#endif
#endif // __MICROPY_INCLUDED_STM32F4_PERIPHERALS_PERIPH_H__

View File

@ -77,10 +77,13 @@ extern const mp_obj_type_t mcu_pin_type;
#define NO_PIN 0xff
// Choose based on chip
#ifdef STM32F412Zx
#ifdef stm32f412zx
#include "stm32f412zx/pins.h"
#endif
#ifdef STM32F411xE
#ifdef stm32f411xe
#include "stm32f411xe/pins.h"
#endif
#ifdef stm32f405xx
#include "stm32f405xx/pins.h"
#endif
#endif // __MICROPY_INCLUDED_STM32F4_PERIPHERALS_PINS_H__

View File

@ -28,17 +28,15 @@
void stm32f4_peripherals_clocks_init(void) {
//System clock init
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* The voltage scaling allows optimizing the power consumption when the
* device is clocked below the maximum system frequency, to update the
* voltage scaling value regarding system frequency refer to product
* datasheet. */
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE Oscillator and activate PLL with HSE as source */
@ -47,28 +45,17 @@ void stm32f4_peripherals_clocks_init(void) {
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLN = 200;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
RCC_OscInitStruct.PLL.PLLR = 2;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/* Select PLLSAI output as USB clock source */
PeriphClkInitStruct.PLLI2S.PLLI2SM = 8;
PeriphClkInitStruct.PLLI2S.PLLI2SQ = 4;
PeriphClkInitStruct.PLLI2S.PLLI2SN = 192;
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CK48;
PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLI2SQ;
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
* clocks dividers */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
}

View File

@ -24,159 +24,6 @@
* THE SOFTWARE.
*/
/* GPIO PIN REFERENCE
#define LED3_Pin GPIO_PIN_2
#define LED3_GPIO_Port GPIOE
#define LED4_Pin GPIO_PIN_3
#define LED4_GPIO_Port GPIOE
#define DFSDM_DATIN3_Pin GPIO_PIN_4
#define DFSDM_DATIN3_GPIO_Port GPIOE
#define A0_Pin GPIO_PIN_0
#define A0_GPIO_Port GPIOF
#define LCD_BLCTRL_Pin GPIO_PIN_5
#define LCD_BLCTRL_GPIO_Port GPIOF
#define QSPI_BK1_IO3_Pin GPIO_PIN_6
#define QSPI_BK1_IO3_GPIO_Port GPIOF
#define QSPI_BK1_IO2_Pin GPIO_PIN_7
#define QSPI_BK1_IO2_GPIO_Port GPIOF
#define QSPI_BK1_IO0_Pin GPIO_PIN_8
#define QSPI_BK1_IO0_GPIO_Port GPIOF
#define QSPI_BK1_IO1_Pin GPIO_PIN_9
#define QSPI_BK1_IO1_GPIO_Port GPIOF
#define STLK_MCO_Pin GPIO_PIN_0
#define STLK_MCO_GPIO_Port GPIOH
#define DFSDM_CKOUT_Pin GPIO_PIN_2
#define DFSDM_CKOUT_GPIO_Port GPIOC
#define JOY_SEL_Pin GPIO_PIN_0
#define JOY_SEL_GPIO_Port GPIOA
#define STLINK_RX_Pin GPIO_PIN_2
#define STLINK_RX_GPIO_Port GPIOA
#define STLINK_TX_Pin GPIO_PIN_3
#define STLINK_TX_GPIO_Port GPIOA
#define CODEC_I2S3_WS_Pin GPIO_PIN_4
#define CODEC_I2S3_WS_GPIO_Port GPIOA
#define DFSDM_DATIN0_Pin GPIO_PIN_1
#define DFSDM_DATIN0_GPIO_Port GPIOB
#define QSPI_CLK_Pin GPIO_PIN_2
#define QSPI_CLK_GPIO_Port GPIOB
#define EXT_RESET_Pin GPIO_PIN_11
#define EXT_RESET_GPIO_Port GPIOF
#define CTP_RST_Pin GPIO_PIN_12
#define CTP_RST_GPIO_Port GPIOF
#define JOY_RIGHT_Pin GPIO_PIN_14
#define JOY_RIGHT_GPIO_Port GPIOF
#define JOY_LEFT_Pin GPIO_PIN_15
#define JOY_LEFT_GPIO_Port GPIOF
#define JOY_UP_Pin GPIO_PIN_0
#define JOY_UP_GPIO_Port GPIOG
#define JOY_DOWN_Pin GPIO_PIN_1
#define JOY_DOWN_GPIO_Port GPIOG
#define D4_Pin GPIO_PIN_7
#define D4_GPIO_Port GPIOE
#define D5_Pin GPIO_PIN_8
#define D5_GPIO_Port GPIOE
#define D6_Pin GPIO_PIN_9
#define D6_GPIO_Port GPIOE
#define D7_Pin GPIO_PIN_10
#define D7_GPIO_Port GPIOE
#define D8_Pin GPIO_PIN_11
#define D8_GPIO_Port GPIOE
#define D9_Pin GPIO_PIN_12
#define D9_GPIO_Port GPIOE
#define D10_Pin GPIO_PIN_13
#define D10_GPIO_Port GPIOE
#define D11_Pin GPIO_PIN_14
#define D11_GPIO_Port GPIOE
#define D12_Pin GPIO_PIN_15
#define D12_GPIO_Port GPIOE
#define I2C2_SCL_Pin GPIO_PIN_10
#define I2C2_SCL_GPIO_Port GPIOB
#define M2_CKIN_Pin GPIO_PIN_11
#define M2_CKIN_GPIO_Port GPIOB
#define CODEC_I2S3_SCK_Pin GPIO_PIN_12
#define CODEC_I2S3_SCK_GPIO_Port GPIOB
#define D13_Pin GPIO_PIN_8
#define D13_GPIO_Port GPIOD
#define D14_Pin GPIO_PIN_9
#define D14_GPIO_Port GPIOD
#define D15_Pin GPIO_PIN_10
#define D15_GPIO_Port GPIOD
#define LCD_RESET_Pin GPIO_PIN_11
#define LCD_RESET_GPIO_Port GPIOD
#define D0_Pin GPIO_PIN_14
#define D0_GPIO_Port GPIOD
#define D1_Pin GPIO_PIN_15
#define D1_GPIO_Port GPIOD
#define CODEC_INT_Pin GPIO_PIN_2
#define CODEC_INT_GPIO_Port GPIOG
#define LCD_TE_Pin GPIO_PIN_4
#define LCD_TE_GPIO_Port GPIOG
#define CTP_INT_Pin GPIO_PIN_5
#define CTP_INT_GPIO_Port GPIOG
#define QSPI_BK1_NCS_Pin GPIO_PIN_6
#define QSPI_BK1_NCS_GPIO_Port GPIOG
#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7
#define USB_OTGFS_OVRCR_GPIO_Port GPIOG
#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8
#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG
#define CODEC_I2S3_MCK_Pin GPIO_PIN_7
#define CODEC_I2S3_MCK_GPIO_Port GPIOC
#define uSD_D0_Pin GPIO_PIN_8
#define uSD_D0_GPIO_Port GPIOC
#define uSD_D1_Pin GPIO_PIN_9
#define uSD_D1_GPIO_Port GPIOC
#define M2_CKINA8_Pin GPIO_PIN_8
#define M2_CKINA8_GPIO_Port GPIOA
#define USB_OTGFS_VBUS_Pin GPIO_PIN_9
#define USB_OTGFS_VBUS_GPIO_Port GPIOA
#define USB_OTGFS_ID_Pin GPIO_PIN_10
#define USB_OTGFS_ID_GPIO_Port GPIOA
#define USB_OTGFS_DM_Pin GPIO_PIN_11
#define USB_OTGFS_DM_GPIO_Port GPIOA
#define USB_OTGFS_DP_Pin GPIO_PIN_12
#define USB_OTGFS_DP_GPIO_Port GPIOA
#define SWDIO_Pin GPIO_PIN_13
#define SWDIO_GPIO_Port GPIOA
#define SWCLK_Pin GPIO_PIN_14
#define SWCLK_GPIO_Port GPIOA
#define uSD_D2_Pin GPIO_PIN_10
#define uSD_D2_GPIO_Port GPIOC
#define uSD_D3_Pin GPIO_PIN_11
#define uSD_D3_GPIO_Port GPIOC
#define uSD_CLK_Pin GPIO_PIN_12
#define uSD_CLK_GPIO_Port GPIOC
#define D2_Pin GPIO_PIN_0
#define D2_GPIO_Port GPIOD
#define D3_Pin GPIO_PIN_1
#define D3_GPIO_Port GPIOD
#define uSD_CMD_Pin GPIO_PIN_2
#define uSD_CMD_GPIO_Port GPIOD
#define uSD_DETECT_Pin GPIO_PIN_3
#define uSD_DETECT_GPIO_Port GPIOD
#define FMC_NOE_Pin GPIO_PIN_4
#define FMC_NOE_GPIO_Port GPIOD
#define FMC_NWE_Pin GPIO_PIN_5
#define FMC_NWE_GPIO_Port GPIOD
#define FMC_NE1_Pin GPIO_PIN_7
#define FMC_NE1_GPIO_Port GPIOD
#define SWO_Pin GPIO_PIN_3
#define SWO_GPIO_Port GPIOB
#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4
#define CODEC_I2S3ext_SD_GPIO_Port GPIOB
#define CODEC_I2S3_SD_Pin GPIO_PIN_5
#define CODEC_I2S3_SD_GPIO_Port GPIOB
#define I2C1_SCL_Pin GPIO_PIN_6
#define I2C1_SCL_GPIO_Port GPIOB
#define I2C1_SDA_Pin GPIO_PIN_7
#define I2C1_SDA_GPIO_Port GPIOB
#define I2C2_SDA_Pin GPIO_PIN_9
#define I2C2_SDA_GPIO_Port GPIOB
#define LED1_Pin GPIO_PIN_0
#define LED1_GPIO_Port GPIOE
#define LED2_Pin GPIO_PIN_1
#define LED2_GPIO_Port GPIOE
*/
#include "stm32f4xx_hal.h"
#include "stm32f4/gpio.h"
#include "common-hal/microcontroller/Pin.h"
@ -193,16 +40,6 @@ void stm32f4_peripherals_gpio_init(void) {
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
HAL_GPIO_WritePin(GPIOE, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3, GPIO_PIN_RESET);
//HAL_GPIO_WritePin(USB_OTGFS_PPWR_EN_GPIO_Port, USB_OTGFS_PPWR_EN_Pin, GPIO_PIN_SET);
//Configure LED pins
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
//Status LED chain
stm32f4_peripherals_status_led(0,1);
stm32f4_peripherals_status_led(1,0);
@ -224,20 +61,8 @@ void stm32f4_peripherals_gpio_init(void) {
// never_reset_pin_number(5,1); //PH1 JTRST
}
//LEDs are inverted on F411 DISCO
void stm32f4_peripherals_status_led(uint8_t led, uint8_t state) {
switch(led)
{
case 0: HAL_GPIO_WritePin(GPIOE, GPIO_PIN_0, (state ^ 1));
break;
case 1: HAL_GPIO_WritePin(GPIOE, GPIO_PIN_1, (state ^ 1));
break;
case 2: HAL_GPIO_WritePin(GPIOE, GPIO_PIN_2, (state ^ 1));
break;
case 3: HAL_GPIO_WritePin(GPIOE, GPIO_PIN_3, (state ^ 1));
break;
default: break;
}
}

View File

@ -0,0 +1,49 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/obj.h"
#include "py/mphal.h"
#include "stm32f4/pins.h"
#include "stm32f4/periph.h"
// I2C
I2C_TypeDef * mcu_i2c_banks[3] = {I2C1, I2C2, I2C3};
const mcu_i2c_sda_obj_t mcu_i2c_sda_list[4] = {
I2C_SDA(1, 4, &pin_PB07),
I2C_SDA(1, 4, &pin_PB09),
I2C_SDA(2, 4, &pin_PB11),
I2C_SDA(3, 4, &pin_PC09),
};
const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4] = {
I2C_SCL(1, 4, &pin_PB06),
I2C_SCL(1, 4, &pin_PB08),
I2C_SCL(2, 4, &pin_PB10),
I2C_SCL(3, 4, &pin_PA08)
};
//SPI, UART, Etc

View File

@ -0,0 +1,37 @@
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2019 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
#define MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H
//I2C
extern I2C_TypeDef * mcu_i2c_banks[3];
extern const mcu_i2c_sda_obj_t mcu_i2c_sda_list[4];
extern const mcu_i2c_scl_obj_t mcu_i2c_scl_list[4];
#endif // MICROPY_INCLUDED_STM32F4_PERIPHERALS_STM32F411VE_PERIPH_H

View File

@ -41,35 +41,35 @@ const mcu_pin_obj_t pin_PC15 = PIN(2, 15, NO_ADC); //OSC32_OUT
const mcu_pin_obj_t pin_PF00 = PIN(5, 0, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF01 = PIN(5, 1, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF02 = PIN(5, 2, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF03 = PIN(5, 3, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF04 = PIN(5, 4, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF05 = PIN(5, 5, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF06 = PIN(5, 6, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF07 = PIN(5, 7, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF08 = PIN(5, 8, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF09 = PIN(5, 9, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF10 = PIN(5, 10, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF03 = PIN(5, 3, ADC_INPUT(ADC_3,9)); // 144 only
const mcu_pin_obj_t pin_PF04 = PIN(5, 4, ADC_INPUT(ADC_3,14)); // 144 only
const mcu_pin_obj_t pin_PF05 = PIN(5, 5, ADC_INPUT(ADC_3,15)); // 144 only
const mcu_pin_obj_t pin_PF06 = PIN(5, 6, ADC_INPUT(ADC_3,4)); // 144 only
const mcu_pin_obj_t pin_PF07 = PIN(5, 7, ADC_INPUT(ADC_3,5)); // 144 only
const mcu_pin_obj_t pin_PF08 = PIN(5, 8, ADC_INPUT(ADC_3,6)); // 144 only
const mcu_pin_obj_t pin_PF09 = PIN(5, 9, ADC_INPUT(ADC_3,7)); // 144 only
const mcu_pin_obj_t pin_PF10 = PIN(5, 10, ADC_INPUT(ADC_3,8)); // 144 only
const mcu_pin_obj_t pin_PC00 = PIN(2, 0, ADC_INPUT(ADC_1,10));
const mcu_pin_obj_t pin_PC01 = PIN(2, 1, ADC_INPUT(ADC_1,11));
const mcu_pin_obj_t pin_PC02 = PIN(2, 2, ADC_INPUT(ADC_1,12));
const mcu_pin_obj_t pin_PC03 = PIN(2, 3, ADC_INPUT(ADC_1,13));
const mcu_pin_obj_t pin_PC00 = PIN(2, 0, ADC_INPUT(ADC_123,10));
const mcu_pin_obj_t pin_PC01 = PIN(2, 1, ADC_INPUT(ADC_123,11));
const mcu_pin_obj_t pin_PC02 = PIN(2, 2, ADC_INPUT(ADC_123,12));
const mcu_pin_obj_t pin_PC03 = PIN(2, 3, ADC_INPUT(ADC_123,13));
const mcu_pin_obj_t pin_PA00 = PIN(0, 0, ADC_INPUT(ADC_1,0));
const mcu_pin_obj_t pin_PA01 = PIN(0, 1, ADC_INPUT(ADC_1,1));
const mcu_pin_obj_t pin_PA02 = PIN(0, 2, ADC_INPUT(ADC_1,2));
const mcu_pin_obj_t pin_PA03 = PIN(0, 3, ADC_INPUT(ADC_1,3));
const mcu_pin_obj_t pin_PA04 = PIN(0, 4, ADC_INPUT(ADC_1,4));
const mcu_pin_obj_t pin_PA05 = PIN(0, 5, ADC_INPUT(ADC_1,5));
const mcu_pin_obj_t pin_PA06 = PIN(0, 6, ADC_INPUT(ADC_1,6));
const mcu_pin_obj_t pin_PA07 = PIN(0, 7, ADC_INPUT(ADC_1,7));
const mcu_pin_obj_t pin_PA00 = PIN(0, 0, ADC_INPUT(ADC_123,0));
const mcu_pin_obj_t pin_PA01 = PIN(0, 1, ADC_INPUT(ADC_123,1));
const mcu_pin_obj_t pin_PA02 = PIN(0, 2, ADC_INPUT(ADC_123,2));
const mcu_pin_obj_t pin_PA03 = PIN(0, 3, ADC_INPUT(ADC_123,3));
const mcu_pin_obj_t pin_PA04 = PIN(0, 4, ADC_INPUT(ADC_12,4));
const mcu_pin_obj_t pin_PA05 = PIN(0, 5, ADC_INPUT(ADC_12,5));
const mcu_pin_obj_t pin_PA06 = PIN(0, 6, ADC_INPUT(ADC_12,6));
const mcu_pin_obj_t pin_PA07 = PIN(0, 7, ADC_INPUT(ADC_12,7));
const mcu_pin_obj_t pin_PC04 = PIN(2, 4, ADC_INPUT(ADC_1,14));
const mcu_pin_obj_t pin_PC05 = PIN(2, 5, ADC_INPUT(ADC_1,15));
const mcu_pin_obj_t pin_PC04 = PIN(2, 4, ADC_INPUT(ADC_12,14));
const mcu_pin_obj_t pin_PC05 = PIN(2, 5, ADC_INPUT(ADC_12,15));
const mcu_pin_obj_t pin_PB00 = PIN(1, 0, ADC_INPUT(ADC_1,8));
const mcu_pin_obj_t pin_PB01 = PIN(1, 1, ADC_INPUT(ADC_1,9));
const mcu_pin_obj_t pin_PB02 = PIN(1, 2, NO_ADC);
const mcu_pin_obj_t pin_PB00 = PIN(1, 0, ADC_INPUT(ADC_12,8));
const mcu_pin_obj_t pin_PB01 = PIN(1, 1, ADC_INPUT(ADC_12,9));
const mcu_pin_obj_t pin_PB02 = PIN(1, 2, NO_ADC); //BOOT1
const mcu_pin_obj_t pin_PF11 = PIN(5, 11, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PF12 = PIN(5, 12, NO_ADC); // 144 only
@ -91,7 +91,7 @@ const mcu_pin_obj_t pin_PE14 = PIN(4, 14, NO_ADC);
const mcu_pin_obj_t pin_PE15 = PIN(4, 15, NO_ADC);
const mcu_pin_obj_t pin_PB10 = PIN(1, 10, NO_ADC);
const mcu_pin_obj_t pin_PB11 = PIN(1, 11, NO_ADC); // 144 only
const mcu_pin_obj_t pin_PB11 = PIN(1, 11, NO_ADC);
const mcu_pin_obj_t pin_PB12 = PIN(1, 12, NO_ADC);
const mcu_pin_obj_t pin_PB13 = PIN(1, 13, NO_ADC);
const mcu_pin_obj_t pin_PB14 = PIN(1, 14, NO_ADC);