djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add port-specific requested changes

Browse Source
This commit is contained in:
Lucian Copeland 2020-01-29 16:00:38 -05:00
parent 3c86005546
commit 8a9c3097e3
2 changed files with 6 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ports/stm32f4/boards/meowbit_v121/pins.c
View File

@ -11,7 +11,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_DISP_CS), MP_ROM_PTR(&pin_PB12) },
{ MP_ROM_QSTR(MP_QSTR_DISP_DC), MP_ROM_PTR(&pin_PA08) },
{ MP_ROM_QSTR(MP_QSTR_DISP_RST), MP_ROM_PTR(&pin_PB10) },
{ MP_ROM_QSTR(MP_QSTR_DISP_BL), MP_ROM_PTR(&pin_PB03) }, //what is this, backlight?
{ MP_ROM_QSTR(MP_QSTR_DISP_BL), MP_ROM_PTR(&pin_PB03) },
{ MP_ROM_QSTR(MP_QSTR_BUZZ), MP_ROM_PTR(&pin_PB08) },
{ MP_ROM_QSTR(MP_QSTR_BTNA), MP_ROM_PTR(&pin_PB09) },

13
ports/stm32f4/common-hal/pulseio/PWMOut.c
View File

@ -69,7 +69,6 @@ STATIC uint32_t timer_get_source_freq(uint32_t tim_id) {
STATIC uint32_t timer_get_internal_duty(uint16_t duty, uint32_t period) {
//duty cycle is duty/0xFFFF fraction x (number of pulses per period)
//Note that pulses are inverted, so duty cycle is inverted
return (duty*period) / ((1 << 16) - 1);
}
@ -114,11 +113,12 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self,
bool first_time_setup = true;
for (uint i = 0; i < tim_num; i++) {
uint8_t l_tim_index = mcu_tim_pin_list[i].tim_index - 1;
uint8_t l_tim_channel = mcu_tim_pin_list[i].channel_index - 1;
const mcu_tim_pin_obj_t * l_tim = &mcu_tim_pin_list[i];
uint8_t l_tim_index = l_tim->tim_index - 1;
uint8_t l_tim_channel = l_tim->channel_index - 1;
//if pin is same
if (mcu_tim_pin_list[i].pin == pin) {
if (l_tim->pin == pin) {
//check if the timer has a channel active
if (reserved_tim[l_tim_index] != 0) {
//is it the same channel? (or all channels reserved by a var-freq)
@ -139,7 +139,7 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self,
first_time_setup = false; //skip setting up the timer
}
//No problems taken, so set it up
self->tim = &mcu_tim_pin_list[i];
self->tim = l_tim;
break;
}
}
@ -205,9 +205,6 @@ pwmout_result_t common_hal_pulseio_pwmout_construct(pulseio_pwmout_obj_t* self,
self->chan_handle.Pulse = timer_get_internal_duty(duty, period);
self->chan_handle.OCPolarity = TIM_OCPOLARITY_HIGH;
self->chan_handle.OCFastMode = TIM_OCFAST_DISABLE;
self->chan_handle.OCNPolarity = TIM_OCNPOLARITY_LOW; // needed for TIM1 and TIM8
self->chan_handle.OCIdleState = TIM_OCIDLESTATE_SET; // needed for TIM1 and TIM8
self->chan_handle.OCNIdleState = TIM_OCNIDLESTATE_SET; // needed for TIM1 and TIM8
if (HAL_TIM_PWM_ConfigChannel(&self->handle, &self->chan_handle, self->channel) != HAL_OK) {
mp_raise_ValueError(translate("Could not initialize channel"));
}