Merge pull request #2520 from joeycastillo/openbook-squashed

CircuitPython support for the Open Book
2020-01-15 17:21:19 -05:00 · 2020-01-15 17:21:19 -05:00 · f496b6cdc8
commit f496b6cdc8
parent c1ed78de79 eb481c9247
5 changed files with 221 additions and 0 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@ -125,6 +125,7 @@ jobs:
        - "metro_nrf52840_express"
        - "mini_sam_m4"
        - "monster_m4sk"
+        - "openbook_m4"
        - "particle_argon"
        - "particle_boron"
        - "particle_xenon"
--- a/ports/atmel-samd/boards/openbook_m4/board.c
+++ b/ports/atmel-samd/boards/openbook_m4/board.c
@ -0,0 +1,107 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Joey Castillo
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "boards/board.h"
+#include "mpconfigboard.h"
+#include "hal/include/hal_gpio.h"
+#include "shared-bindings/busio/SPI.h"
+#include "shared-bindings/displayio/FourWire.h"
+#include "shared-bindings/time/__init__.h"
+#include "shared-module/displayio/__init__.h"
+#include "shared-module/displayio/mipi_constants.h"
+#include "tick.h"
+
+displayio_fourwire_obj_t board_display_obj;
+
+#define DELAY 0x80
+#define HEIGHT 400
+#define WIDTH 300
+
+uint8_t start_sequence[] = {
+    0x01, 0x04, 0x03, 0x00, 0x2b, 0x2b, // power setting
+    0x06, 0x03, 0x17, 0x17, 0x17, // booster soft start
+    0x04, 0x80, 0xc8, // power on and wait 200 ms
+    0x00, 0x01, 0x0f, // panel setting
+    0x61, 0x04, (HEIGHT >> 8) & 0xFF, HEIGHT & 0xFF, (WIDTH >> 8) & 0xFF, WIDTH & 0xFF // Resolution
+};
+
+uint8_t stop_sequence[] = {
+    0x50, 0x01, 0xf7, // CDI setting
+    0x02, 0x80, 0xf0  // Power off
+};
+
+void board_init(void) {
+    busio_spi_obj_t* spi = &displays[0].fourwire_bus.inline_bus;
+    common_hal_busio_spi_construct(spi, &pin_PB13, &pin_PB15, NULL);
+    common_hal_busio_spi_never_reset(spi);
+
+    displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
+    bus->base.type = &displayio_fourwire_type;
+    common_hal_displayio_fourwire_construct(bus,
+        spi,
+        &pin_PB05, // EPD_DC Command or data
+        &pin_PB07, // EPD_CS Chip select
+        &pin_PA00, // EPD_RST Reset
+        1000000);
+
+    displayio_epaperdisplay_obj_t* display = &displays[0].epaper_display;
+    display->base.type = &displayio_epaperdisplay_type;
+    common_hal_displayio_epaperdisplay_construct(display,
+        bus,
+        start_sequence,
+        sizeof(start_sequence),
+        stop_sequence,
+        sizeof(stop_sequence),
+        400, // width
+        300, // height
+        400, // RAM width
+        300, // RAM height
+        0, // colstart
+        0, // rowstart
+        0, // rotation
+        NO_COMMAND, // set_column_window_command
+        NO_COMMAND, // set_row_window_command
+        NO_COMMAND, // set_current_column_command
+        NO_COMMAND, // set_current_row_command
+        0x13, // write_black_ram_command
+        false, // black_bits_inverted
+        NO_COMMAND, // write_color_ram_command (can add this for grayscale eventually)
+        false, // color_bits_inverted
+        0x000000, // highlight_color
+        0x12, // refresh_display_command
+        40, // refresh_time
+        &pin_PA01, // busy_pin
+        false, // busy_state
+        5, // seconds_per_frame
+        false); // chip_select (don't always toggle chip select)
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}
--- a/ports/atmel-samd/boards/openbook_m4/mpconfigboard.h
+++ b/ports/atmel-samd/boards/openbook_m4/mpconfigboard.h
@ -0,0 +1,28 @@
+#define MICROPY_HW_BOARD_NAME "The Open Book Feather"
+#define MICROPY_HW_MCU_NAME "samd51j19"
+
+#define CIRCUITPY_MCU_FAMILY samd51
+
+#define MICROPY_HW_LED_STATUS   (&pin_PA23)
+
+// These are pins not to reset.
+// QSPI Data pins
+#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
+// DotStar pins, QSPI CS, and QSPI SCK
+#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11)
+#define MICROPY_PORT_C (0)
+#define MICROPY_PORT_D (0)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_PA13)
+#define DEFAULT_I2C_BUS_SDA (&pin_PA12)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_PA17)
+#define DEFAULT_SPI_BUS_MOSI (&pin_PB23)
+#define DEFAULT_SPI_BUS_MISO (&pin_PB22)
+
+#define DEFAULT_UART_BUS_RX (&pin_PB17)
+#define DEFAULT_UART_BUS_TX (&pin_PB16)
+
+// USB is always used internally so skip the pin objects for it.
+#define IGNORE_PIN_PA24     1
+#define IGNORE_PIN_PA25     1
--- a/ports/atmel-samd/boards/openbook_m4/mpconfigboard.mk
+++ b/ports/atmel-samd/boards/openbook_m4/mpconfigboard.mk
@ -0,0 +1,14 @@
+USB_VID = 0x239A
+USB_PID = 0x807E
+USB_PRODUCT = "The Open Book Feather"
+USB_MANUFACTURER = "Oddly Specific Objects"
+
+CHIP_VARIANT = SAMD51J19A
+CHIP_FAMILY = samd51
+
+QSPI_FLASH_FILESYSTEM = 1
+EXTERNAL_FLASH_DEVICE_COUNT = 1
+EXTERNAL_FLASH_DEVICES = GD25Q16C
+LONGINT_IMPL = MPZ
+
+CIRCUITPY_GAMEPADSHIFT = 1
--- a/ports/atmel-samd/boards/openbook_m4/pins.c
+++ b/ports/atmel-samd/boards/openbook_m4/pins.c
@ -0,0 +1,71 @@
+#include "shared-bindings/board/__init__.h"
+
+#include "boards/board.h"
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A0),  MP_ROM_PTR(&pin_PA02) }, // A0 = audio right channel
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A1),  MP_ROM_PTR(&pin_PA05) }, // A1 = audio left channel
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A2),  MP_ROM_PTR(&pin_PB08) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A3),  MP_ROM_PTR(&pin_PB09) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A4),  MP_ROM_PTR(&pin_PA04) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A5),  MP_ROM_PTR(&pin_PA06) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A6),  MP_ROM_PTR(&pin_PB01) }, // A6 = VBAT Monitor
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A7),  MP_ROM_PTR(&pin_PB04) }, // A7 = Raw mic input
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A8),  MP_ROM_PTR(&pin_PB03) }, // A8 = Bottom STEMMA Port
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A9),  MP_ROM_PTR(&pin_PB02) }, // A9 = Top STEMMA Port
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A10),  MP_ROM_PTR(&pin_PA07) }, // A10 = Amplified mic input
+    { MP_OBJ_NEW_QSTR(MP_QSTR_A11),  MP_ROM_PTR(&pin_PB00) }, // A11 = VBUS Monitor
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D0),  MP_ROM_PTR(&pin_PB17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D1),  MP_ROM_PTR(&pin_PB16) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D2),  MP_ROM_PTR(&pin_PB03) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D3),  MP_ROM_PTR(&pin_PB02) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D5),  MP_ROM_PTR(&pin_PA16) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D6),  MP_ROM_PTR(&pin_PA18) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D9),  MP_ROM_PTR(&pin_PA19) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D10),  MP_ROM_PTR(&pin_PA20) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D11),  MP_ROM_PTR(&pin_PA21) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D12),  MP_ROM_PTR(&pin_PA22) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D13),  MP_ROM_PTR(&pin_PA23) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_D48),  MP_ROM_PTR(&pin_PB31) },
+
+    // UART
+    { MP_OBJ_NEW_QSTR(MP_QSTR_RX),  MP_ROM_PTR(&pin_PB17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_TX),  MP_ROM_PTR(&pin_PB16) },
+
+    // I2C
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SDA),  MP_ROM_PTR(&pin_PA12) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCL),  MP_ROM_PTR(&pin_PA13) },
+
+    // SPI
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCK),  MP_ROM_PTR(&pin_PA17) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MISO),  MP_ROM_PTR(&pin_PB22) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI),  MP_ROM_PTR(&pin_PB23) },
+
+    // e-paper SPI and control pins
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCK1),  MP_ROM_PTR(&pin_PB13) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MOSI1),  MP_ROM_PTR(&pin_PB15) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ECS),  MP_ROM_PTR(&pin_PB07) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_EDC),  MP_ROM_PTR(&pin_PB05) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_ERST),  MP_ROM_PTR(&pin_PA00) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_EBSY),  MP_ROM_PTR(&pin_PA01) },
+
+    // Special named pins
+    { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL),  MP_ROM_PTR(&pin_PA15) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LOCK_BUTTON),  MP_ROM_PTR(&pin_PA27) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_LATCH),  MP_ROM_PTR(&pin_PB12) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_OUT),  MP_ROM_PTR(&pin_PB30) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_BUTTON_CLOCK),  MP_ROM_PTR(&pin_PB14) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SDCS),  MP_ROM_PTR(&pin_PA14) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_MIC_SHUTDOWN),  MP_ROM_PTR(&pin_PB31) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_BCS),  MP_ROM_PTR(&pin_PB06) }, // BCS = Babel Chip Select, the second flash chip
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+
+    { MP_ROM_QSTR(MP_QSTR_DISPLAY), MP_ROM_PTR(&displays[0].epaper_display)}
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);