add TG-Watch02A board def

This commit is contained in:
TG-Techie 2020-03-10 22:40:55 -04:00
parent fec84054d9
commit 50b451ae0c
3 changed files with 30 additions and 40 deletions

View File

@ -27,21 +27,16 @@
#include "nrfx/hal/nrf_gpio.h"
<<<<<<< HEAD
#define MICROPY_HW_BOARD_NAME "TG-Techie's TG-Watch02A"
#define MICROPY_HW_BOARD_NAME "TG-Techie's TG-Watch02A Rev:00"
#define MICROPY_HW_MCU_NAME "nRF52840"
=======
#define MICROPY_HW_BOARD_NAME "TG-Watch02A-rev00"
#define MICROPY_HW_MCU_NAME "nRF52840"
//#define FLASH_SIZE (0x100000)
//#define FLASH_PAGE_SIZE (4096)
#define FLASH_SIZE (0x100000)
#define FLASH_PAGE_SIZE (4096)
>>>>>>> 7198056bc31ebae22337af119c07c7dca03e85d5
#define MICROPY_HW_NEOPIXEL (&pin_P0_16)
#define MICROPY_HW_LED_STATUS (&pin_P1_15)
#define MICROPY_HW_LED_STATUS (&pin_P0_07)
#if QSPI_FLASH_FILESYSTEM
#define MICROPY_QSPI_DATA0 NRF_GPIO_PIN_MAP(0, 17)
@ -59,15 +54,14 @@
#define SPI_FLASH_CS_PIN &pin_P0_20
#endif
<<<<<<< HEAD
=======
/*
#define CIRCUITPY_AUTORELOAD_DELAY_MS 500
#define CIRCUITPY_INTERNAL_NVM_SIZE (4096)
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
*/
>>>>>>> 7198056bc31ebae22337af119c07c7dca03e85d5
#define BOARD_HAS_CRYSTAL 0
#define DEFAULT_I2C_BUS_SCL (&pin_P0_11)

View File

@ -1,6 +1,6 @@
USB_VID = 0x239A
USB_PID = 0x802A
<<<<<<< HEAD
USB_PRODUCT = "TG-Watch02A"
USB_MANUFACTURER = "TG-Tech"
@ -9,29 +9,29 @@ MCU_CHIP = nrf52840
QSPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 2
EXTERNAL_FLASH_DEVICES = "GD25Q16C, W25Q128JV_SQ"
=======
USB_PRODUCT = "TG-Watch02"
USB_MANUFACTURER = "TG-Tech
MCU_SERIES = m4
MCU_VARIANT = nrf52
MCU_SUB_VARIANT = nrf52840
MCU_CHIP = nrf52840
SD ?= s140
SOFTDEV_VERSION ?= 6.1.0
BOOT_SETTING_ADDR = 0xFF000
#USB_PRODUCT = "TG-Watch02"
#USB_MANUFACTURER = "TG-Tech
ifeq ($(SD),)
LD_FILE = boards/nrf52840_1M_256k.ld
else
LD_FILE = boards/adafruit_$(MCU_SUB_VARIANT)_$(SD_LOWER)_v$(firstword $(subst ., ,$(SOFTDEV_VERSION))).ld
CIRCUITPY_BLEIO = 1
endif
#MCU_SERIES = m4
#MCU_VARIANT = nrf52
#MCU_SUB_VARIANT = nrf52840
#MCU_CHIP = nrf52840
#SD ?= s140
#SOFTDEV_VERSION ?= 6.1.0
NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
#BOOT_SETTING_ADDR = 0xFF000
QSPI_FLASH_FILESYSTEM = 1
EXTERNAL_FLASH_DEVICE_COUNT = 1
EXTERNAL_FLASH_DEVICES = "GD25Q16C"
>>>>>>> 7198056bc31ebae22337af119c07c7dca03e85d5
#ifeq ($(SD),)
# LD_FILE = boards/nrf52840_1M_256k.ld
#else
# LD_FILE = boards/adafruit_$(MCU_SUB_VARIANT)_$(SD_LOWER)_v$(firstword $(subst ., ,$(SOFTDEV_VERSION))).ld
# CIRCUITPY_BLEIO = 1
#endif
#NRF_DEFINES += -DNRF52840_XXAA -DNRF52840
#QSPI_FLASH_FILESYSTEM = 1
#EXTERNAL_FLASH_DEVICE_COUNT = 1
#EXTERNAL_FLASH_DEVICES = "GD25Q16C"

View File

@ -48,8 +48,6 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
<<<<<<< HEAD
/*TG-Watch02A specific pins*/
//tft / display pins
@ -74,7 +72,7 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_ACCEL_INT1), MP_ROM_PTR(&pin_P1_11) },
{ MP_ROM_QSTR(MP_QSTR_ACCEL_INT2), MP_ROM_PTR(&pin_P1_10) },
{ MP_ROM_QSTR(MP_QSTR_HAPTIC_INT), MP_ROM_PTR(&pin_P1_07) },
{ MP_ROM_QSTR(MP_QSTR_HAPTIC_ENABLE), MP_ROM_PTR(&pin_P1_06) },
@ -82,8 +80,6 @@ STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR_SMC_RESET), MP_ROM_PTR(&pin_P0_08) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON0), MP_ROM_PTR(&pin_P1_08) },
{ MP_ROM_QSTR(MP_QSTR_BUTTON1), MP_ROM_PTR(&pin_P1_09) },
=======
>>>>>>> 7198056bc31ebae22337af119c07c7dca03e85d5
};
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);