djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

WIP

Browse Source
This commit is contained in:
Hierophect 2019-09-18 16:49:15 -04:00
parent 72fa4e250d
commit 12cd009bb9
7 changed files with 26 additions and 1273 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
ports/stm32f4/Makefile
View File

@ -143,7 +143,6 @@ CFLAGS += -DHSE_VALUE=8000000 -DCFG_TUSB_MCU=OPT_MCU_STM32F4 -DCFG_TUD_CDC_RX_BU
######################################
SRC_STM32 = \
boards/$(BOARD)/stm32f4xx_hal_msp.c \
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_gpio.c \
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_adc.c \
stm32f4/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c \

427
ports/stm32f4/boards/stm32f411ve_discovery/stm32f4xx_hal_msp.c
View File

@ -1,427 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* File Name : stm32f4xx_hal_msp.c
* Description : This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "stm32f4xx_hal.h"
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
#define DATA_Ready_Pin GPIO_PIN_2
#define DATA_Ready_GPIO_Port GPIOE
#define CS_I2C_SPI_Pin GPIO_PIN_3
#define CS_I2C_SPI_GPIO_Port GPIOE
#define INT1_Pin GPIO_PIN_4
#define INT1_GPIO_Port GPIOE
#define INT2_Pin GPIO_PIN_5
#define INT2_GPIO_Port GPIOE
#define PC14_OSC32_IN_Pin GPIO_PIN_14
#define PC14_OSC32_IN_GPIO_Port GPIOC
#define PC15_OSC32_OUT_Pin GPIO_PIN_15
#define PC15_OSC32_OUT_GPIO_Port GPIOC
#define PH0_OSC_IN_Pin GPIO_PIN_0
#define PH0_OSC_IN_GPIO_Port GPIOH
#define PH1_OSC_OUT_Pin GPIO_PIN_1
#define PH1_OSC_OUT_GPIO_Port GPIOH
#define OTG_FS_PowerSwitchOn_Pin GPIO_PIN_0
#define OTG_FS_PowerSwitchOn_GPIO_Port GPIOC
#define PDM_OUT_Pin GPIO_PIN_3
#define PDM_OUT_GPIO_Port GPIOC
#define I2S3_WS_Pin GPIO_PIN_4
#define I2S3_WS_GPIO_Port GPIOA
#define SPI1_SCK_Pin GPIO_PIN_5
#define SPI1_SCK_GPIO_Port GPIOA
#define SPI1_MISO_Pin GPIO_PIN_6
#define SPI1_MISO_GPIO_Port GPIOA
#define SPI1_MOSI_Pin GPIO_PIN_7
#define SPI1_MOSI_GPIO_Port GPIOA
#define CLK_IN_Pin GPIO_PIN_10
#define CLK_IN_GPIO_Port GPIOB
#define LD4_Pin GPIO_PIN_12
#define LD4_GPIO_Port GPIOD
#define LD3_Pin GPIO_PIN_13
#define LD3_GPIO_Port GPIOD
#define LD5_Pin GPIO_PIN_14
#define LD5_GPIO_Port GPIOD
#define LD6_Pin GPIO_PIN_15
#define LD6_GPIO_Port GPIOD
#define I2S3_MCK_Pin GPIO_PIN_7
#define I2S3_MCK_GPIO_Port GPIOC
#define VBUS_FS_Pin GPIO_PIN_9
#define VBUS_FS_GPIO_Port GPIOA
#define OTG_FS_ID_Pin GPIO_PIN_10
#define OTG_FS_ID_GPIO_Port GPIOA
#define OTG_FS_DM_Pin GPIO_PIN_11
#define OTG_FS_DM_GPIO_Port GPIOA
#define OTG_FS_DP_Pin GPIO_PIN_12
#define OTG_FS_DP_GPIO_Port GPIOA
#define SWDIO_Pin GPIO_PIN_13
#define SWDIO_GPIO_Port GPIOA
#define SWCLK_Pin GPIO_PIN_14
#define SWCLK_GPIO_Port GPIOA
#define I2S3_SCK_Pin GPIO_PIN_10
#define I2S3_SCK_GPIO_Port GPIOC
#define I2S3_SD_Pin GPIO_PIN_12
#define I2S3_SD_GPIO_Port GPIOC
#define Audio_RST_Pin GPIO_PIN_4
#define Audio_RST_GPIO_Port GPIOD
#define OTG_FS_OverCurrent_Pin GPIO_PIN_5
#define OTG_FS_OverCurrent_GPIO_Port GPIOD
#define SWO_Pin GPIO_PIN_3
#define SWO_GPIO_Port GPIOB
#define Audio_SCL_Pin GPIO_PIN_6
#define Audio_SCL_GPIO_Port GPIOB
#define Audio_SDA_Pin GPIO_PIN_9
#define Audio_SDA_GPIO_Port GPIOB
#define MEMS_INT2_Pin GPIO_PIN_1
#define MEMS_INT2_GPIO_Port GPIOE
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0);
/* System interrupt init*/
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/**
* @brief I2C MSP Initialization
* This function configures the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hi2c->Instance==I2C1)
{
/* USER CODE BEGIN I2C1_MspInit 0 */
/* USER CODE END I2C1_MspInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
/**I2C1 GPIO Configuration
PB6 ------> I2C1_SCL
PB9 ------> I2C1_SDA
*/
GPIO_InitStruct.Pin = Audio_SCL_Pin|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_I2C1_CLK_ENABLE();
/* USER CODE BEGIN I2C1_MspInit 1 */
/* USER CODE END I2C1_MspInit 1 */
}
}
/**
* @brief I2C MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{
if(hi2c->Instance==I2C1)
{
/* USER CODE BEGIN I2C1_MspDeInit 0 */
/* USER CODE END I2C1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_I2C1_CLK_DISABLE();
/**I2C1 GPIO Configuration
PB6 ------> I2C1_SCL
PB9 ------> I2C1_SDA
*/
HAL_GPIO_DeInit(GPIOB, Audio_SCL_Pin|Audio_SDA_Pin);
/* USER CODE BEGIN I2C1_MspDeInit 1 */
/* USER CODE END I2C1_MspDeInit 1 */
}
}
/**
* @brief I2S MSP Initialization
* This function configures the hardware resources used in this example
* @param hi2s: I2S handle pointer
* @retval None
*/
void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hi2s->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspInit 0 */
/* USER CODE END SPI2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI2_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**I2S2 GPIO Configuration
PC2 ------> I2S2_ext_SD
PC3 ------> I2S2_SD
PB10 ------> I2S2_CK
PB12 ------> I2S2_WS
*/
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_I2S2ext;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = PDM_OUT_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(PDM_OUT_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = CLK_IN_Pin|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN SPI2_MspInit 1 */
/* USER CODE END SPI2_MspInit 1 */
}
else if(hi2s->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspInit 0 */
/* USER CODE END SPI3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI3_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**I2S3 GPIO Configuration
PA4 ------> I2S3_WS
PC7 ------> I2S3_MCK
PC10 ------> I2S3_CK
PC12 ------> I2S3_SD
*/
GPIO_InitStruct.Pin = I2S3_WS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(I2S3_WS_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = I2S3_MCK_Pin|I2S3_SCK_Pin|I2S3_SD_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* USER CODE BEGIN SPI3_MspInit 1 */
/* USER CODE END SPI3_MspInit 1 */
}
}
/**
* @brief I2S MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hi2s: I2S handle pointer
* @retval None
*/
void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
{
if(hi2s->Instance==SPI2)
{
/* USER CODE BEGIN SPI2_MspDeInit 0 */
/* USER CODE END SPI2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI2_CLK_DISABLE();
/**I2S2 GPIO Configuration
PC2 ------> I2S2_ext_SD
PC3 ------> I2S2_SD
PB10 ------> I2S2_CK
PB12 ------> I2S2_WS
*/
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|PDM_OUT_Pin);
HAL_GPIO_DeInit(GPIOB, CLK_IN_Pin|GPIO_PIN_12);
/* USER CODE BEGIN SPI2_MspDeInit 1 */
/* USER CODE END SPI2_MspDeInit 1 */
}
else if(hi2s->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspDeInit 0 */
/* USER CODE END SPI3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI3_CLK_DISABLE();
/**I2S3 GPIO Configuration
PA4 ------> I2S3_WS
PC7 ------> I2S3_MCK
PC10 ------> I2S3_CK
PC12 ------> I2S3_SD
*/
HAL_GPIO_DeInit(I2S3_WS_GPIO_Port, I2S3_WS_Pin);
HAL_GPIO_DeInit(GPIOC, I2S3_MCK_Pin|I2S3_SCK_Pin|I2S3_SD_Pin);
/* USER CODE BEGIN SPI3_MspDeInit 1 */
/* USER CODE END SPI3_MspDeInit 1 */
}
}
/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspInit 0 */
/* USER CODE END SPI1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI1_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
GPIO_InitStruct.Pin = SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN SPI1_MspInit 1 */
/* USER CODE END SPI1_MspInit 1 */
}
}
/**
* @brief SPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
{
if(hspi->Instance==SPI1)
{
/* USER CODE BEGIN SPI1_MspDeInit 0 */
/* USER CODE END SPI1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI1_CLK_DISABLE();
/**SPI1 GPIO Configuration
PA5 ------> SPI1_SCK
PA6 ------> SPI1_MISO
PA7 ------> SPI1_MOSI
*/
HAL_GPIO_DeInit(GPIOA, SPI1_SCK_Pin|SPI1_MISO_Pin|SPI1_MOSI_Pin);
/* USER CODE BEGIN SPI1_MspDeInit 1 */
/* USER CODE END SPI1_MspDeInit 1 */
}
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

832
ports/stm32f4/boards/stm32f412zg_discovery/stm32f4xx_hal_msp.c
View File

@ -1,832 +0,0 @@
/* USER CODE BEGIN Header */
/**
******************************************************************************
* File Name : stm32f4xx_hal_msp.c
* Description : This file provides code for the MSP Initialization
* and de-Initialization codes.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/* USER CODE BEGIN Includes */
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */
/* USER CODE END TD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */
#define LED3_Pin GPIO_PIN_2
#define LED3_GPIO_Port GPIOE
#define LED4_Pin GPIO_PIN_3
#define LED4_GPIO_Port GPIOE
#define DFSDM_DATIN3_Pin GPIO_PIN_4
#define DFSDM_DATIN3_GPIO_Port GPIOE
#define A0_Pin GPIO_PIN_0
#define A0_GPIO_Port GPIOF
#define LCD_BLCTRL_Pin GPIO_PIN_5
#define LCD_BLCTRL_GPIO_Port GPIOF
#define QSPI_BK1_IO3_Pin GPIO_PIN_6
#define QSPI_BK1_IO3_GPIO_Port GPIOF
#define QSPI_BK1_IO2_Pin GPIO_PIN_7
#define QSPI_BK1_IO2_GPIO_Port GPIOF
#define QSPI_BK1_IO0_Pin GPIO_PIN_8
#define QSPI_BK1_IO0_GPIO_Port GPIOF
#define QSPI_BK1_IO1_Pin GPIO_PIN_9
#define QSPI_BK1_IO1_GPIO_Port GPIOF
#define STLK_MCO_Pin GPIO_PIN_0
#define STLK_MCO_GPIO_Port GPIOH
#define DFSDM_CKOUT_Pin GPIO_PIN_2
#define DFSDM_CKOUT_GPIO_Port GPIOC
#define JOY_SEL_Pin GPIO_PIN_0
#define JOY_SEL_GPIO_Port GPIOA
#define STLINK_RX_Pin GPIO_PIN_2
#define STLINK_RX_GPIO_Port GPIOA
#define STLINK_TX_Pin GPIO_PIN_3
#define STLINK_TX_GPIO_Port GPIOA
#define CODEC_I2S3_WS_Pin GPIO_PIN_4
#define CODEC_I2S3_WS_GPIO_Port GPIOA
#define DFSDM_DATIN0_Pin GPIO_PIN_1
#define DFSDM_DATIN0_GPIO_Port GPIOB
#define QSPI_CLK_Pin GPIO_PIN_2
#define QSPI_CLK_GPIO_Port GPIOB
#define EXT_RESET_Pin GPIO_PIN_11
#define EXT_RESET_GPIO_Port GPIOF
#define CTP_RST_Pin GPIO_PIN_12
#define CTP_RST_GPIO_Port GPIOF
#define JOY_RIGHT_Pin GPIO_PIN_14
#define JOY_RIGHT_GPIO_Port GPIOF
#define JOY_LEFT_Pin GPIO_PIN_15
#define JOY_LEFT_GPIO_Port GPIOF
#define JOY_UP_Pin GPIO_PIN_0
#define JOY_UP_GPIO_Port GPIOG
#define JOY_DOWN_Pin GPIO_PIN_1
#define JOY_DOWN_GPIO_Port GPIOG
#define D4_Pin GPIO_PIN_7
#define D4_GPIO_Port GPIOE
#define D5_Pin GPIO_PIN_8
#define D5_GPIO_Port GPIOE
#define D6_Pin GPIO_PIN_9
#define D6_GPIO_Port GPIOE
#define D7_Pin GPIO_PIN_10
#define D7_GPIO_Port GPIOE
#define D8_Pin GPIO_PIN_11
#define D8_GPIO_Port GPIOE
#define D9_Pin GPIO_PIN_12
#define D9_GPIO_Port GPIOE
#define D10_Pin GPIO_PIN_13
#define D10_GPIO_Port GPIOE
#define D11_Pin GPIO_PIN_14
#define D11_GPIO_Port GPIOE
#define D12_Pin GPIO_PIN_15
#define D12_GPIO_Port GPIOE
#define I2C2_SCL_Pin GPIO_PIN_10
#define I2C2_SCL_GPIO_Port GPIOB
#define M2_CKIN_Pin GPIO_PIN_11
#define M2_CKIN_GPIO_Port GPIOB
#define CODEC_I2S3_SCK_Pin GPIO_PIN_12
#define CODEC_I2S3_SCK_GPIO_Port GPIOB
#define D13_Pin GPIO_PIN_8
#define D13_GPIO_Port GPIOD
#define D14_Pin GPIO_PIN_9
#define D14_GPIO_Port GPIOD
#define D15_Pin GPIO_PIN_10
#define D15_GPIO_Port GPIOD
#define LCD_RESET_Pin GPIO_PIN_11
#define LCD_RESET_GPIO_Port GPIOD
#define D0_Pin GPIO_PIN_14
#define D0_GPIO_Port GPIOD
#define D1_Pin GPIO_PIN_15
#define D1_GPIO_Port GPIOD
#define CODEC_INT_Pin GPIO_PIN_2
#define CODEC_INT_GPIO_Port GPIOG
#define LCD_TE_Pin GPIO_PIN_4
#define LCD_TE_GPIO_Port GPIOG
#define CTP_INT_Pin GPIO_PIN_5
#define CTP_INT_GPIO_Port GPIOG
#define QSPI_BK1_NCS_Pin GPIO_PIN_6
#define QSPI_BK1_NCS_GPIO_Port GPIOG
#define USB_OTGFS_OVRCR_Pin GPIO_PIN_7
#define USB_OTGFS_OVRCR_GPIO_Port GPIOG
#define USB_OTGFS_PPWR_EN_Pin GPIO_PIN_8
#define USB_OTGFS_PPWR_EN_GPIO_Port GPIOG
#define CODEC_I2S3_MCK_Pin GPIO_PIN_7
#define CODEC_I2S3_MCK_GPIO_Port GPIOC
#define uSD_D0_Pin GPIO_PIN_8
#define uSD_D0_GPIO_Port GPIOC
#define uSD_D1_Pin GPIO_PIN_9
#define uSD_D1_GPIO_Port GPIOC
#define M2_CKINA8_Pin GPIO_PIN_8
#define M2_CKINA8_GPIO_Port GPIOA
#define USB_OTGFS_VBUS_Pin GPIO_PIN_9
#define USB_OTGFS_VBUS_GPIO_Port GPIOA
#define USB_OTGFS_ID_Pin GPIO_PIN_10
#define USB_OTGFS_ID_GPIO_Port GPIOA
#define USB_OTGFS_DM_Pin GPIO_PIN_11
#define USB_OTGFS_DM_GPIO_Port GPIOA
#define USB_OTGFS_DP_Pin GPIO_PIN_12
#define USB_OTGFS_DP_GPIO_Port GPIOA
#define SWDIO_Pin GPIO_PIN_13
#define SWDIO_GPIO_Port GPIOA
#define SWCLK_Pin GPIO_PIN_14
#define SWCLK_GPIO_Port GPIOA
#define uSD_D2_Pin GPIO_PIN_10
#define uSD_D2_GPIO_Port GPIOC
#define uSD_D3_Pin GPIO_PIN_11
#define uSD_D3_GPIO_Port GPIOC
#define uSD_CLK_Pin GPIO_PIN_12
#define uSD_CLK_GPIO_Port GPIOC
#define D2_Pin GPIO_PIN_0
#define D2_GPIO_Port GPIOD
#define D3_Pin GPIO_PIN_1
#define D3_GPIO_Port GPIOD
#define uSD_CMD_Pin GPIO_PIN_2
#define uSD_CMD_GPIO_Port GPIOD
#define uSD_DETECT_Pin GPIO_PIN_3
#define uSD_DETECT_GPIO_Port GPIOD
#define FMC_NOE_Pin GPIO_PIN_4
#define FMC_NOE_GPIO_Port GPIOD
#define FMC_NWE_Pin GPIO_PIN_5
#define FMC_NWE_GPIO_Port GPIOD
#define FMC_NE1_Pin GPIO_PIN_7
#define FMC_NE1_GPIO_Port GPIOD
#define SWO_Pin GPIO_PIN_3
#define SWO_GPIO_Port GPIOB
#define CODEC_I2S3ext_SD_Pin GPIO_PIN_4
#define CODEC_I2S3ext_SD_GPIO_Port GPIOB
#define CODEC_I2S3_SD_Pin GPIO_PIN_5
#define CODEC_I2S3_SD_GPIO_Port GPIOB
#define I2C1_SCL_Pin GPIO_PIN_6
#define I2C1_SCL_GPIO_Port GPIOB
#define I2C1_SDA_Pin GPIO_PIN_7
#define I2C1_SDA_GPIO_Port GPIOB
#define I2C2_SDA_Pin GPIO_PIN_9
#define I2C2_SDA_GPIO_Port GPIOB
#define LED1_Pin GPIO_PIN_0
#define LED1_GPIO_Port GPIOE
#define LED2_Pin GPIO_PIN_1
#define LED2_GPIO_Port GPIOE
/* USER CODE END Define */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */
/* USER CODE END Macro */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */
/* USER CODE END ExternalFunctions */
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
{
/* USER CODE BEGIN MspInit 0 */
/* USER CODE END MspInit 0 */
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
/* System interrupt init*/
/* USER CODE BEGIN MspInit 1 */
/* USER CODE END MspInit 1 */
}
/**
* @brief I2C MSP Initialization
* This function configures the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hi2c->Instance==I2C1)
{
/* USER CODE BEGIN I2C1_MspInit 0 */
/* USER CODE END I2C1_MspInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
/**I2C1 GPIO Configuration
PB6 ------> I2C1_SCL
PB7 ------> I2C1_SDA
*/
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_I2C1_CLK_ENABLE();
/* USER CODE BEGIN I2C1_MspInit 1 */
/* USER CODE END I2C1_MspInit 1 */
}
else if(hi2c->Instance==I2C2)
{
/* USER CODE BEGIN I2C2_MspInit 0 */
/* USER CODE END I2C2_MspInit 0 */
__HAL_RCC_GPIOB_CLK_ENABLE();
/**I2C2 GPIO Configuration
PB10 ------> I2C2_SCL
PB9 ------> I2C2_SDA
*/
GPIO_InitStruct.Pin = I2C2_SCL_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;//GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
HAL_GPIO_Init(I2C2_SCL_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = I2C2_SDA_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_NOPULL;//GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_I2C2;
HAL_GPIO_Init(I2C2_SDA_GPIO_Port, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_I2C2_CLK_ENABLE();
/* USER CODE BEGIN I2C2_MspInit 1 */
/* USER CODE END I2C2_MspInit 1 */
}
}
/**
* @brief I2C MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{
if(hi2c->Instance==I2C1)
{
/* USER CODE BEGIN I2C1_MspDeInit 0 */
/* USER CODE END I2C1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_I2C1_CLK_DISABLE();
/**I2C1 GPIO Configuration
PB6 ------> I2C1_SCL
PB7 ------> I2C1_SDA
*/
HAL_GPIO_DeInit(GPIOB, I2C1_SCL_Pin|I2C1_SDA_Pin);
/* USER CODE BEGIN I2C1_MspDeInit 1 */
/* USER CODE END I2C1_MspDeInit 1 */
}
else if(hi2c->Instance==I2C2)
{
/* USER CODE BEGIN I2C2_MspDeInit 0 */
/* USER CODE END I2C2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_I2C2_CLK_DISABLE();
/**I2C2 GPIO Configuration
PB10 ------> I2C2_SCL
PB9 ------> I2C2_SDA
*/
HAL_GPIO_DeInit(GPIOB, I2C2_SCL_Pin|I2C2_SDA_Pin);
/* USER CODE BEGIN I2C2_MspDeInit 1 */
/* USER CODE END I2C2_MspDeInit 1 */
}
}
/**
* @brief I2S MSP Initialization
* This function configures the hardware resources used in this example
* @param hi2s: I2S handle pointer
* @retval None
*/
void HAL_I2S_MspInit(I2S_HandleTypeDef* hi2s)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hi2s->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspInit 0 */
/* USER CODE END SPI3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SPI3_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
/**I2S3 GPIO Configuration
PA4 ------> I2S3_WS
PB12 ------> I2S3_CK
PC7 ------> I2S3_MCK
PB4 ------> I2S3_ext_SD
PB5 ------> I2S3_SD
*/
GPIO_InitStruct.Pin = CODEC_I2S3_WS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(CODEC_I2S3_WS_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = CODEC_I2S3_SCK_Pin|CODEC_I2S3ext_SD_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF7_SPI3;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = CODEC_I2S3_MCK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(CODEC_I2S3_MCK_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = CODEC_I2S3_SD_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
HAL_GPIO_Init(CODEC_I2S3_SD_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN SPI3_MspInit 1 */
/* USER CODE END SPI3_MspInit 1 */
}
}
/**
* @brief I2S MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hi2s: I2S handle pointer
* @retval None
*/
void HAL_I2S_MspDeInit(I2S_HandleTypeDef* hi2s)
{
if(hi2s->Instance==SPI3)
{
/* USER CODE BEGIN SPI3_MspDeInit 0 */
/* USER CODE END SPI3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SPI3_CLK_DISABLE();
/**I2S3 GPIO Configuration
PA4 ------> I2S3_WS
PB12 ------> I2S3_CK
PC7 ------> I2S3_MCK
PB4 ------> I2S3_ext_SD
PB5 ------> I2S3_SD
*/
HAL_GPIO_DeInit(CODEC_I2S3_WS_GPIO_Port, CODEC_I2S3_WS_Pin);
HAL_GPIO_DeInit(GPIOB, CODEC_I2S3_SCK_Pin|CODEC_I2S3ext_SD_Pin|CODEC_I2S3_SD_Pin);
HAL_GPIO_DeInit(CODEC_I2S3_MCK_GPIO_Port, CODEC_I2S3_MCK_Pin);
/* USER CODE BEGIN SPI3_MspDeInit 1 */
/* USER CODE END SPI3_MspDeInit 1 */
}
}
/**
* @brief QSPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hqspi: QSPI handle pointer
* @retval None
*/
void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hqspi->Instance==QUADSPI)
{
/* USER CODE BEGIN QUADSPI_MspInit 0 */
/* USER CODE END QUADSPI_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_QSPI_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
/**QUADSPI GPIO Configuration
PF6 ------> QUADSPI_BK1_IO3
PF7 ------> QUADSPI_BK1_IO2
PF8 ------> QUADSPI_BK1_IO0
PF9 ------> QUADSPI_BK1_IO1
PB2 ------> QUADSPI_CLK
PG6 ------> QUADSPI_BK1_NCS
*/
GPIO_InitStruct.Pin = QSPI_BK1_IO3_Pin|QSPI_BK1_IO2_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_QSPI;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = QSPI_BK1_IO0_Pin|QSPI_BK1_IO1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = QSPI_CLK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF9_QSPI;
HAL_GPIO_Init(QSPI_CLK_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = QSPI_BK1_NCS_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
HAL_GPIO_Init(QSPI_BK1_NCS_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN QUADSPI_MspInit 1 */
/* USER CODE END QUADSPI_MspInit 1 */
}
}
/**
* @brief QSPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hqspi: QSPI handle pointer
* @retval None
*/
void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
{
if(hqspi->Instance==QUADSPI)
{
/* USER CODE BEGIN QUADSPI_MspDeInit 0 */
/* USER CODE END QUADSPI_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_QSPI_CLK_DISABLE();
/**QUADSPI GPIO Configuration
PF6 ------> QUADSPI_BK1_IO3
PF7 ------> QUADSPI_BK1_IO2
PF8 ------> QUADSPI_BK1_IO0
PF9 ------> QUADSPI_BK1_IO1
PB2 ------> QUADSPI_CLK
PG6 ------> QUADSPI_BK1_NCS
*/
HAL_GPIO_DeInit(GPIOF, QSPI_BK1_IO3_Pin|QSPI_BK1_IO2_Pin|QSPI_BK1_IO0_Pin|QSPI_BK1_IO1_Pin);
HAL_GPIO_DeInit(QSPI_CLK_GPIO_Port, QSPI_CLK_Pin);
HAL_GPIO_DeInit(QSPI_BK1_NCS_GPIO_Port, QSPI_BK1_NCS_Pin);
/* USER CODE BEGIN QUADSPI_MspDeInit 1 */
/* USER CODE END QUADSPI_MspDeInit 1 */
}
}
/**
* @brief SD MSP Initialization
* This function configures the hardware resources used in this example
* @param hsd: SD handle pointer
* @retval None
*/
void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hsd->Instance==SDIO)
{
/* USER CODE BEGIN SDIO_MspInit 0 */
/* USER CODE END SDIO_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SDIO_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**SDIO GPIO Configuration
PC8 ------> SDIO_D0
PC9 ------> SDIO_D1
PC10 ------> SDIO_D2
PC11 ------> SDIO_D3
PC12 ------> SDIO_CK
PD2 ------> SDIO_CMD
*/
GPIO_InitStruct.Pin = uSD_D0_Pin|uSD_D1_Pin|uSD_D2_Pin|uSD_D3_Pin
|uSD_CLK_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = uSD_CMD_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
HAL_GPIO_Init(uSD_CMD_GPIO_Port, &GPIO_InitStruct);
/* USER CODE BEGIN SDIO_MspInit 1 */
/* USER CODE END SDIO_MspInit 1 */
}
}
/**
* @brief SD MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hsd: SD handle pointer
* @retval None
*/
void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
{
if(hsd->Instance==SDIO)
{
/* USER CODE BEGIN SDIO_MspDeInit 0 */
/* USER CODE END SDIO_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SDIO_CLK_DISABLE();
/**SDIO GPIO Configuration
PC8 ------> SDIO_D0
PC9 ------> SDIO_D1
PC10 ------> SDIO_D2
PC11 ------> SDIO_D3
PC12 ------> SDIO_CK
PD2 ------> SDIO_CMD
*/
HAL_GPIO_DeInit(GPIOC, uSD_D0_Pin|uSD_D1_Pin|uSD_D2_Pin|uSD_D3_Pin
|uSD_CLK_Pin);
HAL_GPIO_DeInit(uSD_CMD_GPIO_Port, uSD_CMD_Pin);
/* USER CODE BEGIN SDIO_MspDeInit 1 */
/* USER CODE END SDIO_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspInit 0 */
/* USER CODE END USART2_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_USART2_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USART2 GPIO Configuration
PA2 ------> USART2_TX
PA3 ------> USART2_RX
*/
GPIO_InitStruct.Pin = STLINK_RX_Pin|STLINK_TX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN USART2_MspInit 1 */
/* USER CODE END USART2_MspInit 1 */
}
}
/**
* @brief UART MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance==USART2)
{
/* USER CODE BEGIN USART2_MspDeInit 0 */
/* USER CODE END USART2_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_USART2_CLK_DISABLE();
/**USART2 GPIO Configuration
PA2 ------> USART2_TX
PA3 ------> USART2_RX
*/
HAL_GPIO_DeInit(GPIOA, STLINK_RX_Pin|STLINK_TX_Pin);
/* USER CODE BEGIN USART2_MspDeInit 1 */
/* USER CODE END USART2_MspDeInit 1 */
}
}
static uint32_t FSMC_Initialized = 0;
static void HAL_FSMC_MspInit(void){
/* USER CODE BEGIN FSMC_MspInit 0 */
/* USER CODE END FSMC_MspInit 0 */
GPIO_InitTypeDef GPIO_InitStruct ={0};
if (FSMC_Initialized) {
return;
}
FSMC_Initialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FSMC_CLK_ENABLE();
/** FSMC GPIO Configuration
PF0 ------> FSMC_A0
PE7 ------> FSMC_D4
PE8 ------> FSMC_D5
PE9 ------> FSMC_D6
PE10 ------> FSMC_D7
PE11 ------> FSMC_D8
PE12 ------> FSMC_D9
PE13 ------> FSMC_D10
PE14 ------> FSMC_D11
PE15 ------> FSMC_D12
PD8 ------> FSMC_D13
PD9 ------> FSMC_D14
PD10 ------> FSMC_D15
PD14 ------> FSMC_D0
PD15 ------> FSMC_D1
PD0 ------> FSMC_D2
PD1 ------> FSMC_D3
PD4 ------> FSMC_NOE
PD5 ------> FSMC_NWE
PD7 ------> FSMC_NE1
*/
GPIO_InitStruct.Pin = A0_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
HAL_GPIO_Init(A0_GPIO_Port, &GPIO_InitStruct);
GPIO_InitStruct.Pin = D4_Pin|D5_Pin|D6_Pin|D7_Pin
|D8_Pin|D9_Pin|D10_Pin|D11_Pin
|D12_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
GPIO_InitStruct.Pin = D13_Pin|D14_Pin|D15_Pin|D0_Pin
|D1_Pin|D2_Pin|D3_Pin|FMC_NOE_Pin
|FMC_NWE_Pin|FMC_NE1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_FSMC;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* USER CODE BEGIN FSMC_MspInit 1 */
/* USER CODE END FSMC_MspInit 1 */
}
void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram){
/* USER CODE BEGIN SRAM_MspInit 0 */
/* USER CODE END SRAM_MspInit 0 */
HAL_FSMC_MspInit();
/* USER CODE BEGIN SRAM_MspInit 1 */
/* USER CODE END SRAM_MspInit 1 */
}
static uint32_t FSMC_DeInitialized = 0;
static void HAL_FSMC_MspDeInit(void){
/* USER CODE BEGIN FSMC_MspDeInit 0 */
/* USER CODE END FSMC_MspDeInit 0 */
if (FSMC_DeInitialized) {
return;
}
FSMC_DeInitialized = 1;
/* Peripheral clock enable */
__HAL_RCC_FSMC_CLK_DISABLE();
/** FSMC GPIO Configuration
PF0 ------> FSMC_A0
PE7 ------> FSMC_D4
PE8 ------> FSMC_D5
PE9 ------> FSMC_D6
PE10 ------> FSMC_D7
PE11 ------> FSMC_D8
PE12 ------> FSMC_D9
PE13 ------> FSMC_D10
PE14 ------> FSMC_D11
PE15 ------> FSMC_D12
PD8 ------> FSMC_D13
PD9 ------> FSMC_D14
PD10 ------> FSMC_D15
PD14 ------> FSMC_D0
PD15 ------> FSMC_D1
PD0 ------> FSMC_D2
PD1 ------> FSMC_D3
PD4 ------> FSMC_NOE
PD5 ------> FSMC_NWE
PD7 ------> FSMC_NE1
*/
HAL_GPIO_DeInit(A0_GPIO_Port, A0_Pin);
HAL_GPIO_DeInit(GPIOE, D4_Pin|D5_Pin|D6_Pin|D7_Pin
|D8_Pin|D9_Pin|D10_Pin|D11_Pin
|D12_Pin);
HAL_GPIO_DeInit(GPIOD, D13_Pin|D14_Pin|D15_Pin|D0_Pin
|D1_Pin|D2_Pin|D3_Pin|FMC_NOE_Pin
|FMC_NWE_Pin|FMC_NE1_Pin);
/* USER CODE BEGIN FSMC_MspDeInit 1 */
/* USER CODE END FSMC_MspDeInit 1 */
}
void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram){
/* USER CODE BEGIN SRAM_MspDeInit 0 */
/* USER CODE END SRAM_MspDeInit 0 */
HAL_FSMC_MspDeInit();
/* USER CODE BEGIN SRAM_MspDeInit 1 */
/* USER CODE END SRAM_MspDeInit 1 */
}
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

31
ports/stm32f4/common-hal/busio/I2C.c
View File

@ -32,6 +32,7 @@
#include "shared-bindings/microcontroller/__init__.h"
#include "supervisor/shared/translate.h"
#include "common-hal/microcontroller/Pin.h"
#include "stm32f4/periph.h"
STATIC I2C_HandleTypeDef hi2c;
@ -57,7 +58,8 @@ STATIC I2C_TypeDef * I2Cbanks[3] =
void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
const mcu_pin_obj_t* scl, const mcu_pin_obj_t* sda, uint32_t frequency, uint32_t timeout) {
I2C_TypeDef * I2Cx;
uint8_t i2cidx = 0;
uint8_t i2cidx_c = 0;
uint8_t len = sizeof(mcu_i2c_list)/sizeof(*mcu_i2c_list);
@ -66,18 +68,27 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
i2cidx = mcu_i2c_list[i]->i2c_index;
}
if (mcu_i2c_list[i]->scl_pin == scl) {
i2cidx_c = mcu_i2c_list[i]->i2c_index
i2cidx_c = mcu_i2c_list[i]->i2c_index;
}
}
if(idcidx == i2cidx_c) {
if(I2Cbanks[idcidx] == NULL || idcidx>=len) {
if(i2cidx == i2cidx_c) {
if(I2Cbanks[i2cidx] == NULL || i2cidx>=len) {
mp_raise_RuntimeError(translate("Bad I2C pin definition, check peripheral files"));
}
I2Cx = I2Cbanks[idcidx];
I2Cx = I2Cbanks[i2cidx];
} else {
mp_raise_RuntimeError(translate("Invalid I2C pin selection"));
}
GPIO_InitTypeDef GPIO_InitStruct = {0};
GPIO_InitStruct.Pin = pin_mask(sda->number)|pin_mask(scl->number);
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; //TODO; custom per pin? Or error if mixed is bad.
HAL_GPIO_Init(pin_port(sda->port), &GPIO_InitStruct);
__HAL_RCC_I2C1_CLK_ENABLE(); //TODO custom per periph
hi2c.Instance = I2Cx;
hi2c.Init.ClockSpeed = 100000;
hi2c.Init.DutyCycle = I2C_DUTYCYCLE_2;
@ -93,15 +104,15 @@ void common_hal_busio_i2c_construct(busio_i2c_obj_t *self,
mp_printf(&mp_plat_print, "I2C INIT OK");
}
self->sda_pin = sda->number;
self->scl_pin = scl->number;
self->sda_pin = sda;
self->scl_pin = scl;
claim_pin(sda);
claim_pin(scl);
}
bool common_hal_busio_i2c_deinited(busio_i2c_obj_t *self) {
return self->sda_pin == NO_PIN;
return self->sda_pin == NULL;
}
void common_hal_busio_i2c_deinit(busio_i2c_obj_t *self) {
@ -111,8 +122,8 @@ void common_hal_busio_i2c_deinit(busio_i2c_obj_t *self) {
HAL_I2C_MspDeInit(&hi2c);
self->sda_pin = NO_PIN;
self->scl_pin = NO_PIN;
self->sda_pin = NULL;
self->scl_pin = NULL;
}
bool common_hal_busio_i2c_probe(busio_i2c_obj_t *self, uint8_t addr) {

4
ports/stm32f4/common-hal/busio/I2C.h
View File

@ -38,8 +38,8 @@ typedef struct {
mp_obj_base_t base;
I2C_HandleTypeDef i2c_handle;
bool has_lock;
uint8_t scl_pin;
uint8_t sda_pin;
const mcu_pin_obj_t *scl_pin;
const mcu_pin_obj_t *sda_pin;
} busio_i2c_obj_t;
#endif // MICROPY_INCLUDED_STM32F4_COMMON_HAL_BUSIO_I2C_H

2
ports/stm32f4/peripherals/stm32f4/stm32f411xe/periph.c
View File

@ -36,7 +36,7 @@
const mcu_i2c_periph_obj_t periph_I2C1_0 = I2C(1, 0, &pin_PB07, &pin_PB06);
const mcu_i2c_periph_obj_t periph_I2C1_1 = I2C(1, 1, &pin_PB09, &pin_PB08);
//const mcu_i2c_periph_obj_t periph_I2C2 = I2C(1, NO_ALT, &pin_PB11, &pin_PB10); //not on LQFP100
//const mcu_i2c_periph_obj_t periph_I2C2 = I2C(1, NO_ALT, &pin_PB11, &pin_PB10); //AFN only
const mcu_i2c_periph_obj_t periph_I2C3 = I2C(1, NO_ALT, &pin_PB09, &pin_PB08);
const mcu_i2c_periph_obj_t* mcu_i2c_list[3] = {&periph_I2C1_0,&periph_I2C1_1,&periph_I2C3};

2
ports/stm32f4/supervisor/port.c
View File

@ -39,6 +39,8 @@
safe_mode_t port_init(void) {
HAL_Init();
__HAL_RCC_SYSCFG_CLK_ENABLE();
__HAL_RCC_PWR_CLK_ENABLE();
stm32f4_peripherals_clocks_init();
stm32f4_peripherals_gpio_init();