circuitpython/locale/cs.po

# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
#
# SPDX-License-Identifier: MIT
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2022-06-11 10:17+0000\n"
"Last-Translator: Matěj Soukup <matej@locuboard.cz>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
"X-Generator: Weblate 4.13-dev\n"

#: main.c
msgid ""
"\n"
"Code done running.\n"
msgstr ""
"\n"
"Program byl dokončen.\n"

#: main.c
msgid ""
"\n"
"Code stopped by auto-reload. Reloading soon.\n"
msgstr ""
"\n"
"Kód byl zastaven kvůli automatickému načtení. K načtení dojde brzy.\n"

#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with your program at https://github.com/adafruit/"
"circuitpython/issues."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Press reset to exit safe mode.\n"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"You are in safe mode because:\n"
msgstr ""

#: py/obj.c
msgid "  File \"%q\""
msgstr "  Soubor \"%q\""

#: py/obj.c
msgid "  File \"%q\", line %d"
msgstr "  Soubor \"%q\", řádek %d"

#: py/builtinhelp.c
msgid " is of type %q\n"
msgstr " je typu %q\n"

#: main.c
msgid " not found.\n"
msgstr " nenalezen\n"

#: main.c
msgid " output:\n"
msgstr " výstup:\n"

#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c vyžaduje int nebo char"

#: main.c
#, c-format
msgid "%02X"
msgstr ""

#: shared-module/os/getenv.c
#, c-format
msgid "%S"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"
msgstr "%d adresní pin, %d rgb pin a %d dlaždice indikuje výšku %d, ne %d"

#: ports/atmel-samd/common-hal/alarm/__init__.c
#: ports/cxd56/common-hal/analogio/AnalogOut.c ports/cxd56/common-hal/rtc/RTC.c
#: ports/espressif/common-hal/rtc/RTC.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/alarm/__init__.c
#: ports/nrf/common-hal/analogio/AnalogOut.c ports/nrf/common-hal/rtc/RTC.c
#: ports/raspberrypi/common-hal/alarm/__init__.c
#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
#: ports/raspberrypi/common-hal/rtc/RTC.c ports/stm/common-hal/alarm/__init__.c
#: ports/stm/common-hal/canio/Listener.c ports/stm/common-hal/rtc/RTC.c
msgid "%q"
msgstr "%q"

#: shared-bindings/microcontroller/Pin.c
msgid "%q and %q contain duplicate pins"
msgstr "%q a %q obsahují duplicitní piny"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "%q and %q must be different"
msgstr "%q a %q musí být rozdílné"

#: shared-bindings/microcontroller/Pin.c
msgid "%q contains duplicate pins"
msgstr "%q obsahuje duplicitní piny"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr "%q: selhání %d"

#: py/argcheck.c
msgid "%q in %q must be of type %q, not %q"
msgstr ""

#: ports/espressif/common-hal/espulp/ULP.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: shared-bindings/digitalio/DigitalInOut.c
#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q se právě používá"

#: py/objstr.c py/objstrunicode.c
msgid "%q index out of range"
msgstr "Index %q je mimo rozsah"

#: shared-module/bitbangio/SPI.c
msgid "%q init failed"
msgstr "Inicializace %q selhala"

#: shared-bindings/dualbank/__init__.c
msgid "%q is %q"
msgstr ""

#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "%q is read-only for this board"
msgstr ""

#: py/argcheck.c shared-bindings/usb_hid/Device.c
msgid "%q length must be %d"
msgstr "Délka %q musí být %d"

#: py/argcheck.c
msgid "%q length must be %d-%d"
msgstr "%q délka musí být %d-%d"

#: py/argcheck.c
msgid "%q length must be <= %d"
msgstr "Délka %q musí být <= %d"

#: py/argcheck.c
msgid "%q length must be >= %d"
msgstr "Délka %q musí být >= %d"

#: py/argcheck.c
msgid "%q must be %d"
msgstr "%q musí být %d"

#: py/argcheck.c
msgid "%q must be %d-%d"
msgstr "%q musí být %d-%d"

#: shared-bindings/displayio/Display.c
msgid "%q must be 1 when %q is True"
msgstr "%q musí být 1, pokud %q je True"

#: py/argcheck.c shared-bindings/gifio/GifWriter.c
msgid "%q must be <= %d"
msgstr "%q musí být <= %d"

#: py/argcheck.c
msgid "%q must be >= %d"
msgstr "%q musí být >= %d"

#: shared-bindings/analogbufio/BufferedIn.c
msgid "%q must be a bytearray or array of type 'H' or 'B'"
msgstr ""

#: shared-bindings/audiocore/RawSample.c
msgid "%q must be a bytearray or array of type 'h', 'H', 'b', or 'B'"
msgstr ""

#: ports/raspberrypi/bindings/cyw43/__init__.c py/argcheck.c py/objexcept.c
#: shared-bindings/canio/CAN.c shared-bindings/digitalio/Pull.c
msgid "%q must be of type %q or %q, not %q"
msgstr ""

#: py/argcheck.c py/obj.c py/objstrunicode.c
msgid "%q must be of type %q, not %q"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
msgid "%q must be power of 2"
msgstr "%q musí být mocnina 2"

#: shared-bindings/wifi/Monitor.c
msgid "%q out of bounds"
msgstr "%q je mimo hranice"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
#: shared-bindings/canio/Match.c
msgid "%q out of range"
msgstr "%q je mimo rozsah"

#: ports/atmel-samd/common-hal/microcontroller/Pin.c
msgid "%q pin invalid"
msgstr "pin %q není platný"

#: py/objrange.c py/objslice.c shared-bindings/random/__init__.c
msgid "%q step cannot be zero"
msgstr ""

#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() vyžaduje %d pozičních argumentů, ale %d jich bylo zadáno"

#: shared-bindings/usb_hid/Device.c
msgid "%q, %q, and %q must all be the same length"
msgstr "%q, %q, a %q musí mít všechny shodnou délku"

#: py/objint.c shared-bindings/storage/__init__.c
msgid "%q=%q"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
#, c-format
msgid "%s error 0x%x"
msgstr "%s chyba 0x%x"

#: py/argcheck.c
msgid "'%q' argument required"
msgstr "Je vyžadován argument '%q'"

#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr "Objekt '%q' nepodporuje '%q'"

#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr "Objekt '%q' není iterátor"

#: py/objtype.c py/runtime.c shared-module/atexit/__init__.c
msgid "'%q' object is not callable"
msgstr "Objekt '%q' nelze zavolat"

#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr "Objekt '%q' není iterovatelný"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' očekává popisek"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' očekává registr"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' očekává speciální registr"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' očekává registr FPU"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' očekává adresu ve formátu [a, b]"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' očekává integer (celé číslo)"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' očekává nejvíce r%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' očekává {r0, r1, ...}"

#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d isn't within range %d..%d"
msgstr "'%s' integer %d není v rozsahu %d..%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x doesn't fit in mask 0x%x"
msgstr "'%s' integer 0x%x nepatří do masky 0x%x"

#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item assignment"
msgstr "'%s' objekt nepodporuje přiřazení položky"

#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item deletion"
msgstr "'%s' objekt nepodporuje smazání položky"

#: py/runtime.c
msgid "'%s' object has no attribute '%q'"
msgstr "'%s' objekt nemá žádný atribut '%q'"

#: py/obj.c
#, c-format
msgid "'%s' object isn't subscriptable"
msgstr "'%s' objekt není vložitelný"

#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr ""

#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "'S' a 'O' nejsou podporované typy formátů"

#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' vyžaduje 1 argument"

#: py/compile.c
msgid "'await' outside function"
msgstr "'await' je volán mimo funkci"

#: py/compile.c
msgid "'await', 'async for' or 'async with' outside async function"
msgstr "'await', 'async for' nebo 'async' je volán mimo async"

#: py/compile.c
msgid "'break' outside loop"
msgstr "'break' je volán vně cyklu"

#: py/compile.c
msgid "'continue' outside loop"
msgstr "'continue' je volán vně cyklu"

#: py/objgenerator.c
msgid "'coroutine' object is not an iterator"
msgstr "Objekt 'coroutine' není iterátor"

#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' vyžaduje nejméně 2 argumenty"

#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' vyžaduje celočíselné argumenty"

#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' vyžaduje 1 argument"

#: py/compile.c
msgid "'return' outside function"
msgstr "'return' je volán mimo funkci"

#: py/compile.c
msgid "'yield from' inside async function"
msgstr "'yield from' volán uvnitř funkce async"

#: py/compile.c
msgid "'yield' outside function"
msgstr "'yield' je volán mimo funkci"

#: py/compile.c
msgid "*x must be assignment target"
msgstr ""

#: py/obj.c
msgid ", in %q\n"
msgstr ", v% q\n"

#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr ""

#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "pow() nepodporuje 3 argumenty"

#: shared-module/msgpack/__init__.c
msgid "64 bit types"
msgstr "64 bit typy"

#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: ports/atmel-samd/common-hal/countio/Counter.c
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "Kanál hardwarového přerušení je již používán"

#: ports/espressif/common-hal/analogio/AnalogIn.c
msgid "ADC2 is being used by WiFi"
msgstr "WiFi používá ADC2"

#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
#, c-format
msgid "Address must be %d bytes long"
msgstr "Adresa musí být %d bajtů dlouhá"

#: ports/espressif/common-hal/memorymap/AddressRange.c
msgid "Address range not allowed"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
msgstr "Všechny CAN periferie jsou používány"

#: ports/espressif/common-hal/busio/I2C.c
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
#: ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Všechny I2C periferie jsou používány"

#: ports/espressif/common-hal/countio/Counter.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr "Všechny PCNT jednotky jsou používány"

#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "All RX FIFOs in use"
msgstr "Všechny RX FIFO jsou používány"

#: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Všechny SPI periferie jsou používány"

#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c
msgid "All UART peripherals are in use"
msgstr "Všechny UART periferie jsou používány"

#: ports/nrf/common-hal/countio/Counter.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c
#: shared-bindings/pwmio/PWMOut.c
msgid "All channels in use"
msgstr "Všechny kanály jsou používány"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Všechny kanály událostí jsou již používány"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "All state machines in use"
msgstr ""

#: ports/atmel-samd/audio_dma.c
msgid "All sync event channels in use"
msgstr ""

#: shared-bindings/pwmio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Všechny časovače pro tento pin jsou používány"

#: ports/atmel-samd/common-hal/_pew/PewPew.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/neopixel_write/__init__.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: ports/espressif/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
msgid "All timers in use"
msgstr "Všechny časovače jsou použity"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr "Již propagujeme."

#: ports/atmel-samd/common-hal/canio/Listener.c
msgid "Already have all-matches listener"
msgstr ""

#: ports/espressif/common-hal/espulp/ULP.c
#: shared-module/memorymonitor/AllocationAlarm.c
#: shared-module/memorymonitor/AllocationSize.c
msgid "Already running"
msgstr "Již běží"

#: ports/espressif/common-hal/wifi/Radio.c
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Already scanning for wifi networks"
msgstr "Již skenuje wifi sítě"

#: shared-module/os/getenv.c
#, c-format
msgid "An error occurred while retrieving '%s':\n"
msgstr ""

#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Another PWMAudioOut is already active"
msgstr "Jiný PWMAudioOut je již aktivní"

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Další odesílání je již aktivní"

#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr "Pole musí obsahovat poloviční slova (typ „H“)"

#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
#: shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Hodnoty pole by měly být jednoduché bajty."

#: shared-module/memorymonitor/AllocationAlarm.c
#, c-format
msgid "Attempt to allocate %d blocks"
msgstr "Pokus o alokování %d bloků"

#: ports/raspberrypi/audio_dma.c
msgid "Audio conversion not implemented"
msgstr "Konverze audia není implementována"

#: shared-bindings/wifi/Radio.c
msgid "AuthMode.OPEN is not used with password"
msgstr "AuthMode.OPEN nepoužívá heslo"

#: shared-bindings/wifi/Radio.c supervisor/shared/web_workflow/web_workflow.c
msgid "Authentication failure"
msgstr "Autentizace selhala"

#: main.c
msgid "Auto-reload is off.\n"
msgstr "Automatické načtení je vypnuto.\n"

#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Automatické opětovné načtení je zapnuto. Jednoduše uložte soubory přes USB a "
"spusťte je, nebo vypněte REPL.\n"

#: ports/espressif/common-hal/canio/CAN.c
msgid "Baudrate not supported by peripheral"
msgstr "Baudrate není podporován periférií"

#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr "Pod minimální obnovovací frekvencí"

#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must be sequential pins"
msgstr "Bitové hodiny a výběr slov musí být sekvenční piny"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr "Výběr bitových hodin a slov musí sdílet jednotku hodin"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Bitová hloubka musí být násobkem 8."

#: shared-bindings/bitmaptools/__init__.c
msgid "Bitmap size and bits per value must match"
msgstr "Velikost bitmapy a počet bitů na hodnotu se musí shodovat"

#: supervisor/shared/safe_mode.c
msgid "Boot device must be first (interface #0)."
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Both RX and TX required for flow control"
msgstr "RX a TX jsou vyžadovány pro kontrolu toku"

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Oba piny musí podporovat hardwarové přerušení"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/is31fl3741/FrameBuffer.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "Brightness must be 0-1.0"
msgstr "Jas musí být 0-1,0"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Brightness not adjustable"
msgstr "Jas není nastavitelný"

#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr "Vyrovnávací paměť + offset je příliš malý %d %d %d"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Buffer elements must be 4 bytes long or less"
msgstr "Prvky bufferu musí být 4 bajty dlouhé nebo méně"

#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is not a bytearray."
msgstr "Buffer není bytearray."

#: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is too small"
msgstr "Vyrovnávací paměť je příliš malá"

#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr "Délka vyrovnávací paměti %d je příliš velká. Musí být menší než %d"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
msgid "Buffer length must be a multiple of 512"
msgstr "Délka vyrovnávací paměti musí být násobkem 512"

#: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Buffer musí být násobkem 512 bajtů"

#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr "Buffer je příliš krátký o %d bajtů"

#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "Buffers must be same size"
msgstr "Buffery musí mít stejnou velikost"

#: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
#: ports/raspberrypi/common-hal/paralleldisplay/ParallelBus.c
#, c-format
msgid "Bus pin %d is already in use"
msgstr "Sběrnicový pin %d je již používán"

#: shared-bindings/_bleio/UUID.c
msgid "Byte buffer must be 16 bytes."
msgstr "Bajtový buffer musí být 16 bajtů."

#: shared-bindings/aesio/aes.c
msgid "CBC blocks must be multiples of 16 bytes"
msgstr "Bloky CBC musí být násobky 16 bajtů"

#: supervisor/shared/safe_mode.c
msgid "CIRCUITPY drive could not be found or created."
msgstr "Disk CIRCUITPY nelze nalézt nebo vytvořit."

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "CRC or checksum was invalid"
msgstr ""

#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr "Volání super().__init__() před přístupem k nativnímu objektu."

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Camera init"
msgstr "Inizializace kamery"

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on RTC IO from deep sleep."
msgstr ""

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on one low pin while others alarm high from deep sleep."
msgstr ""

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on two low pins from deep sleep."
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "Can't set CCCD on local Characteristic"
msgstr "Nelze nastavit CCCD na místní charakteristiku"

#: shared-bindings/storage/__init__.c shared-bindings/usb_cdc/__init__.c
#: shared-bindings/usb_hid/__init__.c shared-bindings/usb_midi/__init__.c
msgid "Cannot change USB devices now"
msgstr "Nelze změnit USB zařízení"

#: shared-bindings/_bleio/Adapter.c
msgid "Cannot create a new Adapter; use _bleio.adapter;"
msgstr "Není možné vytvořit nový adaptér; použití _bleio.adapter;"

#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "Nelze odstranit hodnoty"

#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "Nelze získat ve výstupním režimu"

#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr "Nelze získat teplotu"

#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot pull on input-only pin."
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "Nelze nahrávat do souboru"

#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when visible via USB."
msgstr "Není možné znovu připojit '/', pokud je viditelné pomocí USB."

#: ports/atmel-samd/common-hal/microcontroller/__init__.c
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present"
msgstr ""
"Reset do bootloaderu není možný, protože žádný bootloader není přítomen"

#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Cannot set socket options"
msgstr ""

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "Nelze nastavit hodnotu, když směr je vstup."

#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr "Nelze určit RTS nebo CTS v režimu RS485"

#: py/objslice.c
msgid "Cannot subclass slice"
msgstr "Nelze použít řez podtřídy"

#: shared-module/bitbangio/SPI.c
msgid "Cannot transfer without MOSI and MISO pins"
msgstr ""

#: shared-bindings/pwmio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Nelze měnit frekvenci časovače, který je již používán"

#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge, only level"
msgstr ""

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level."
msgstr ""

#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr "CharacteristicBuffer psaní není poskytováno"

#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr "Jádro kódu CircuitPython tvrdě havarovalo. Jejda!\n"

#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr "Hodiny jsou příliš dlouhé"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Jednotka hodin je používána"

#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
"Připojení bylo odpojeno a nelze jej dále používat. Vytvořte nové připojení."

#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Poškozený soubor .mpy"

#: ports/espressif/common-hal/neopixel_write/__init__.c
msgid "Could not retrieve clock"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "Could not set address"
msgstr "Není možné nastavit adresu"

#: shared-bindings/pwmio/PWMOut.c
msgid "Could not start PWM"
msgstr "Nelze spustit PWM"

#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr "Nelze začít přerušení, RX je zaneprázdněn"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr "Dekodér nelze přiřadit"

#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr "Chyba inicializace kanálu DAC"

#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr "Chyba inicializace zařízení DAC"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC se již používá"

#: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
msgid "Data 0 pin must be byte aligned"
msgstr "Datový pin 0 musí být zarovnán na bajty"

#: shared-module/audiocore/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr "Datový blok musí následovat fmt blok"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data not supported with directed advertising"
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data too large for advertisement packet"
msgstr "Data jsou příliš velká pro propagovaný paket"

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Deep sleep pins must use a rising edge with pulldown"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr "Cílová kapacita je menší než destination_length."

#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr "Zařízení je používáno"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display must have a 16 bit colorspace."
msgstr "Displej musí mít 16bitový barevný prostor."

#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display rotation must be in 90 degree increments"
msgstr "Otočení displeje musí být po 90 stupních"

#: main.c
msgid "Done"
msgstr ""

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr ""

#: py/obj.c
msgid "During handling of the above exception, another exception occurred:"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "ECB only operates on 16 bytes at a time"
msgstr "ECB operuje najednou pouze 16 bajtů"

#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/canio/CAN.c
msgid "ESP-IDF memory allocation failed"
msgstr ""

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr "EXTINT kanál se již používá"

#: shared-module/synthio/MidiTrack.c
#, c-format
msgid "Error in MIDI stream at position %d"
msgstr "Chyba v MIDI přenosu na pozici %d"

#: extmod/modure.c
msgid "Error in regex"
msgstr "Chyba v regulárním výrazu"

#: supervisor/shared/safe_mode.c
msgid "Error in safemode.py."
msgstr ""

#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "Error: Failure to bind"
msgstr ""

#: shared-bindings/alarm/__init__.c
msgid "Expected a kind of %q"
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
msgstr ""

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is defined for ndarrays only"
msgstr ""

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is implemented for linear arrays only"
msgstr "FFT je implementován pouze pro lineární pole"

#: ports/espressif/common-hal/ssl/SSLSocket.c
msgid "Failed SSL handshake"
msgstr ""

#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr "Nepodařilo se odeslat příkaz."

#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr ""

#: shared-module/rgbmatrix/RGBMatrix.c
msgid "Failed to allocate %q buffer"
msgstr "Chyba alokace %q bufferu"

#: ports/espressif/common-hal/wifi/__init__.c
msgid "Failed to allocate Wifi memory"
msgstr "Chyba alokace paměti WiFi"

#: ports/espressif/common-hal/wifi/ScannedNetworks.c
msgid "Failed to allocate wifi scan memory"
msgstr ""

#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Failed to buffer the sample"
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: internal error"
msgstr "Připojení se nezdařilo: interní chyba"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: timeout"
msgstr "Nepodařilo se připojit: časový limit"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Failed to parse MP3 file"
msgstr "Soubor MP3 se nepodařilo analyzovat"

#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr "Nepodařilo se zapsat do interní paměti."

#: supervisor/shared/safe_mode.c
msgid "Fault detected by hardware."
msgstr ""

#: py/moduerrno.c
msgid "File exists"
msgstr "soubor existuje"

#: shared-module/os/getenv.c
msgid "File not found"
msgstr ""

#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "Filters too complex"
msgstr ""

#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is duplicate"
msgstr ""

#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is invalid"
msgstr ""

#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is too big"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "For L8 colorspace, input bitmap must have 8 bits per pixel"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "For RGB colorspaces, input bitmap must have 16 bits per pixel"
msgstr ""

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Format not supported"
msgstr "Formát není podporován"

#: ports/mimxrt10xx/common-hal/microcontroller/Processor.c
msgid ""
"Frequency must be 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 or 1008 Mhz"
msgstr ""
"Frekvence musí být 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 nebo 1008 "
"Mhz"

#: shared-bindings/pwmio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""

#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr "Funkce vyžaduje zámek"

#: ports/cxd56/common-hal/gnss/GNSS.c
msgid "GNSS init"
msgstr "Inicializace GNSS"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Generic Failure"
msgstr "Základní chyba"

#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr "Skupina již byla použita"

#: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "Half duplex SPI is not implemented"
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
#: ports/stm/common-hal/sdioio/SDCard.c
msgid "Hardware busy, try alternative pins"
msgstr "Hardware je zaneprázdněn, zkuste alternativní piny"

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr "Hardware je používán, zkuste alternativní piny"

#: supervisor/shared/safe_mode.c
msgid "Heap allocation when VM not running."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"Heap was corrupted because the stack was too small. Increase stack size."
msgstr ""

#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr ""

#: ports/stm/common-hal/busio/I2C.c
msgid "I2C init error"
msgstr "Chyba inicializace I2C"

#: ports/raspberrypi/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
msgid "I2C peripheral in use"
msgstr "Periférie I2C je používána"

#: shared-bindings/audiobusio/I2SOut.c
msgid "I2SOut not available"
msgstr ""

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "In-buffer elements must be <= 4 bytes long"
msgstr ""

#: py/persistentcode.c
msgid ""
"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
"mpy-update for more info."
msgstr ""
"Nekompatibilní soubor .mpy. Aktualizujte prosím všechny soubory .mpy. Další "
"informace naleznete na adrese http://adafru.it/mpy-update."

#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr "Nesprávná velikost vyrovnávací paměti"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Init program size invalid"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin direction conflicts with initial out pin direction"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin state conflicts with initial out pin state"
msgstr ""

#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr ""

#: shared-bindings/bitops/__init__.c
#, c-format
msgid "Input buffer length (%d) must be a multiple of the strand count (%d)"
msgstr ""

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "Vstup trval příliš dlouho"

#: ports/espressif/common-hal/neopixel_write/__init__.c py/moduerrno.c
msgid "Input/output error"
msgstr "Vstupně/výstupní chyba"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d shifts in more bits than pin count"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d shifts out more bits than pin count"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d uses extra pin"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d waits on input outside of count"
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr "Nedostatečná autentizace"

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr "Nedostatečné šifrování"

#: ports/espressif/common-hal/wifi/Radio.c
msgid "Interface must be started"
msgstr ""

#: ports/atmel-samd/audio_dma.c ports/raspberrypi/audio_dma.c
msgid "Internal audio buffer too small"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""

#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#: shared-module/os/getenv.c
msgid "Internal error"
msgstr "Interní chyba"

#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr "Vnitřní chyba #%d"

#: supervisor/shared/safe_mode.c
msgid "Internal watchdog timer expired."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "Interrupt error."
msgstr ""

#: py/argcheck.c shared-bindings/digitalio/DigitalInOut.c
msgid "Invalid %q"
msgstr ""

#: shared-bindings/microcontroller/Pin.c
msgid "Invalid %q pin"
msgstr "Neplatný pin %q"

#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr "Neplatná hodnota jednotky ADC"

#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Invalid BLE parameter"
msgstr "Chybný BLE parametr"

#: shared-bindings/wifi/Radio.c
msgid "Invalid BSSID"
msgstr "Chybné BSSID"

#: shared-bindings/wifi/Radio.c
msgid "Invalid MAC address"
msgstr "Chybná MAC adresa"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
#: py/moduerrno.c
msgid "Invalid argument"
msgstr "Neplatný argument"

#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr ""

#: shared-module/os/getenv.c
#, c-format
msgid "Invalid byte %.*s"
msgstr ""

#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "Invalid data_pins[%d]"
msgstr "Chybný data_pin[%d]"

#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr "Neplatná velikost bloku"

#: ports/espressif/common-hal/wifi/Radio.c
msgid "Invalid multicast MAC address"
msgstr "Chybná multicastová MAC adresa"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Invalid size"
msgstr "Chybná velikost"

#: ports/espressif/common-hal/ssl/SSLContext.c
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "Invalid socket for TLS"
msgstr "Chybný soket pro TLS"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Invalid state"
msgstr "Chybný stav"

#: shared-module/os/getenv.c
msgid "Invalid unicode escape"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "Key must be 16, 24, or 32 bytes long"
msgstr "Klíč musí být dlouhý 16, 24 nebo 32 bajtů"

#: shared-module/os/getenv.c
msgid "Key not found"
msgstr ""

#: shared-module/is31fl3741/FrameBuffer.c
msgid "LED mappings must match display size"
msgstr "Mapování LED musí korespondovat s velikostí displeje"

#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr ""

#: shared-module/displayio/Group.c
msgid "Layer already in a group"
msgstr ""

#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "MAC address was invalid"
msgstr "MAC adresa byla chybná"

#: shared-bindings/is31fl3741/IS31FL3741.c
msgid "Mapping must be a tuple"
msgstr ""

#: shared-module/displayio/Shape.c
#, c-format
msgid "Maximum x value when mirrored is %d"
msgstr "Maximální hodnota x při zrcadlení je %d"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched data size"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched swap flag"
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr "Chybí pin MISO nebo MOSI"

#: ports/stm/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI pin"
msgstr "Chybějící MISO nebo MOSI pin"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d reads pin(s)"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d waits based on pin"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_out_pin. Instruction %d writes pin(s)"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_set_pin. Instruction %d sets pin(s)"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing jmp_pin. Instruction %d jumps on pin"
msgstr ""

#: shared-bindings/busio/UART.c shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr "Musí být podtřída %q."

#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr "Musí poskytnout pin MISO nebo MOSI"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Je nutné použít několik kolíků 6 rgb, nikoli %d"

#: supervisor/shared/safe_mode.c
msgid "NLR jump failed. Likely memory corruption."
msgstr ""

#: ports/espressif/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr "Chyba NVS"

#: shared-bindings/socketpool/SocketPool.c
msgid "Name or service not known"
msgstr ""

#: py/qstr.c
msgid "Name too long"
msgstr "Jméno je příliš dlouhé"

#: shared-bindings/displayio/TileGrid.c
msgid "New bitmap must be same size as old bitmap"
msgstr "Nová bitmapa musí mít stejnou velikost jako původní bitmapa"

#: ports/espressif/common-hal/_bleio/__init__.c
msgid "Nimble out of memory"
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "No CCCD for this Characteristic"
msgstr "Žádné CCCD pro tuto charakteristiku"

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "Žádný DAC na čipu"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA channel found"
msgstr "Nebyl nalezen žádný kanál DMA"

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA pacing timer found"
msgstr ""

#: shared-module/adafruit_bus_device/i2c_device/I2CDevice.c
#, c-format
msgid "No I2C device at address: 0x%x"
msgstr "Žádné I2C zařízení na adrese: 0x%x"

#: supervisor/shared/web_workflow/web_workflow.c
msgid "No IP"
msgstr ""

#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr "Žádný pin MISO"

#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
msgid "No MISO pin"
msgstr "Žádný MISO pin"

#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr "Žádný pin MOSI"

#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
msgid "No MOSI pin"
msgstr "Žádný MOSI pin"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Žádný RX pin"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Žádný TX pin"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr "Žádné dostupné hodiny"

#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "No capture in progress"
msgstr ""

#: shared-bindings/_bleio/PacketBuffer.c
msgid "No connection: length cannot be determined"
msgstr "Žádné připojení: nelze určit délku"

#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr "Žádná výchozí sběrnice %q"

#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr "Žádné volné GCLK"

#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in in program"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in or out in program"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "No key was specified"
msgstr "Nebyl zadán klíč"

#: shared-bindings/time/__init__.c
msgid "No long integer support"
msgstr ""

#: shared-bindings/wifi/Radio.c
msgid "No network with that ssid"
msgstr "Žádná síť s takovým SSID"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No out in program"
msgstr ""

#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/espressif/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "No pull up found on SDA or SCL; check your wiring"
msgstr ""

#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr "Žádný pulldown na pinu; doporučeno 1Mohm"

#: py/moduerrno.c
msgid "No space left on device"
msgstr "Na zařízení nezůstal žádný prostor"

#: py/moduerrno.c
msgid "No such device"
msgstr "Žádné takové zařízení"

#: py/moduerrno.c
msgid "No such file/directory"
msgstr "Žádný takový soubor / adresář"

#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr "Není k dispozici žádný časovač"

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Nordic system firmware out of memory"
msgstr ""

#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
msgid "Not a valid IP string"
msgstr "Nevalidní IP string"

#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "Not connected"
msgstr "Nepřipojený"

#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
#: shared-bindings/audiopwmio/PWMAudioOut.c
msgid "Not playing"
msgstr "Nehraje"

#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#, c-format
msgid "Number of data_pins must be 8 or 16, not %d"
msgstr "Počet data_pins musí být 8 nebo 16, nikoli %d"

#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
"Objekt byl deinicializován a nelze jej dále používat. Vytvořte nový objekt."

#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr ""

#: supervisor/shared/bluetooth/bluetooth.c
msgid "Off"
msgstr ""

#: supervisor/shared/bluetooth/bluetooth.c
msgid "Ok"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "Only 8 or 16 bit mono with "
msgstr ""

#: ports/espressif/common-hal/wifi/__init__.c
#: ports/raspberrypi/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Pouze IPv4 adresy podporovány"

#: ports/espressif/common-hal/socketpool/Socket.c
#: ports/raspberrypi/common-hal/socketpool/Socket.c
msgid "Only IPv4 sockets supported"
msgstr "Pouze IPv4 sokety podporovány"

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "Only connectable advertisements can be directed"
msgstr ""

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Only edge detection is available on this hardware"
msgstr ""

#: shared-bindings/ipaddress/__init__.c
msgid "Only int or string supported for ip"
msgstr ""

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
msgstr ""

#: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
msgid "Only one %q can be set in deep sleep."
msgstr ""

#: ports/espressif/common-hal/espulp/ULPAlarm.c
msgid "Only one %q can be set."
msgstr ""

#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
#: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
msgid "Only one address is allowed"
msgstr ""

#: ports/atmel-samd/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
#: ports/stm/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set"
msgstr ""

#: ports/espressif/common-hal/alarm/time/TimeAlarm.c
#: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set."
msgstr ""

#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""

#: py/moduerrno.c
msgid "Operation not permitted"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Operation or feature not supported"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Operation timed out"
msgstr ""

#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Out of MDNS service slots"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Out of memory"
msgstr ""

#: ports/espressif/common-hal/socketpool/Socket.c
#: ports/raspberrypi/common-hal/socketpool/Socket.c
msgid "Out of sockets"
msgstr ""

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Out-buffer elements must be <= 4 bytes long"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "PDMIn not available"
msgstr ""

#: shared-bindings/pwmio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "PWM restart"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice already in use"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice channel A already in use"
msgstr ""

#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "Peripheral in use"
msgstr ""

#: py/moduerrno.c
msgid "Permission denied"
msgstr ""

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Pin cannot wake from Deep Sleep"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Pin count too large"
msgstr ""

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin interrupt already in use"
msgstr ""

#: shared-bindings/adafruit_bus_device/spi_device/SPIDevice.c
msgid "Pin is input only"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "Pin must be on PWM Channel B"
msgstr ""

#: ports/atmel-samd/common-hal/countio/Counter.c
msgid "Pin must support hardware interrupts"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""

#: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
msgid "Pins must be sequential"
msgstr ""

#: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
msgid "Pins must be sequential GPIO pins"
msgstr ""

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Pins must share PWM slice"
msgstr ""

#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr ""

#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr ""

#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
msgstr ""
"Zmáčkněte jakoukoli klávesu pro spuštění REPLu. Použijte CTRL-D pro opětovné "
"načtení.\n"

#: main.c
msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
msgstr "Předstírám hluboký spánek do alarmu, CTRL-C nebo zápisu souboru.\n"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does IN without loading ISR"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does OUT without loading OSR"
msgstr ""

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Program size invalid"
msgstr ""

#: ports/espressif/common-hal/espulp/ULP.c
msgid "Program too long"
msgstr ""

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr ""

#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "RAISE mode is not implemented"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "RISE_AND_FALL not available on this chip"
msgstr ""

#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""

#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RS485"
msgstr ""

#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""

#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""

#: shared-bindings/_bleio/__init__.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c shared-module/displayio/Bitmap.c
msgid "Read-only"
msgstr ""

#: extmod/vfs_fat.c py/moduerrno.c
msgid "Read-only filesystem"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Received response was invalid"
msgstr ""

#: supervisor/shared/bluetooth/bluetooth.c
msgid "Reconnecting"
msgstr ""

#: shared-bindings/displayio/EPaperDisplay.c
msgid "Refresh too soon"
msgstr ""

#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "Requested AES mode is unsupported"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Requested resource not found"
msgstr ""

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr ""

#: main.c
msgid "Running in safe mode! Not running saved code.\n"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "SD card CSD format not supported"
msgstr ""

#: ports/cxd56/common-hal/sdioio/SDCard.c
msgid "SDCard init"
msgstr ""

#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO GetCardInfo Error %d"
msgstr ""

#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO Init Error %d"
msgstr ""

#: ports/espressif/common-hal/busio/SPI.c
msgid "SPI configuration failed"
msgstr ""

#: ports/stm/common-hal/busio/SPI.c
msgid "SPI init error"
msgstr ""

#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "SPI peripheral in use"
msgstr ""

#: ports/stm/common-hal/busio/SPI.c
msgid "SPI re-init"
msgstr ""

#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "Scale dimensions must divide by 3"
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progess. Stop with stop_scan."
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr ""

#: shared-bindings/ssl/SSLContext.c
msgid "Server side context cannot have hostname"
msgstr ""

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Size not supported"
msgstr ""

#: ports/raspberrypi/common-hal/alarm/SleepMemory.c
msgid "Sleep Memory not available"
msgstr ""

#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
#: shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr ""

#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/TileGrid.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr ""

#: ports/espressif/common-hal/socketpool/SocketPool.c
#: ports/raspberrypi/common-hal/socketpool/SocketPool.c
msgid "SocketPool can only be used with wifi.radio"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr ""

#: shared-bindings/paralleldisplay/ParallelBus.c
msgid "Specify exactly one of data0 or data_pins"
msgstr ""

#: extmod/modure.c
msgid "Splitting with sub-captures"
msgstr ""

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo left must be on PWM channel A"
msgstr ""

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo right must be on PWM channel B"
msgstr ""

#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Stopping AP is not supported."
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""

#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""

#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "The `microcontroller` module was used to boot into safe mode."
msgstr ""

#: py/obj.c
msgid "The above exception was the direct cause of the following exception:"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "The power dipped. Make sure you are providing enough power."
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's channel count does not match the mixer's"
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's sample rate does not match the mixer's"
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's signedness does not match the mixer's"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "Third-party firmware fatal error."
msgstr ""

#: shared-module/imagecapture/ParallelImageCapture.c
msgid "This microcontroller does not support continuous capture."
msgstr ""

#: shared-module/paralleldisplay/ParallelBus.c
msgid ""
"This microcontroller only supports data0=, not data_pins=, because it "
"requires contiguous pins."
msgstr ""

#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr ""

#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
msgid "Tile index out of bounds"
msgstr ""

#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample"
msgstr ""

#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr ""

#: shared-module/displayio/__init__.c
msgid "Too many display busses"
msgstr ""

#: shared-module/displayio/__init__.c
msgid "Too many displays"
msgstr ""

#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Total data to write is larger than %q"
msgstr ""

#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
#: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c
#: ports/stm/common-hal/alarm/touch/TouchAlarm.c
msgid "Touch alarms not available"
msgstr ""

#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "UART de-init"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "UART init"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "UART re-init"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "UART write"
msgstr ""

#: main.c
msgid "UID:"
msgstr ""

#: shared-module/usb_hid/Device.c
msgid "USB busy"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "USB devices need more endpoints than are available."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "USB devices specify too many interface names."
msgstr ""

#: shared-module/usb_hid/Device.c
msgid "USB error"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "UUID integer value must be 0-0xffff"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "Unable to allocate the heap."
msgstr ""

#: ports/espressif/common-hal/busio/I2C.c
msgid "Unable to create lock"
msgstr ""

#: shared-module/displayio/I2CDisplay.c shared-module/is31fl3741/IS31FL3741.c
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr ""

#: py/parse.c
msgid "Unable to init parser"
msgstr ""

#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr ""

#: ports/espressif/common-hal/mdns/Server.c
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Unable to start mDNS query"
msgstr ""

#: shared-bindings/memorymap/AddressRange.c
msgid "Unable to write to address."
msgstr ""

#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr ""

#: shared-bindings/alarm/SleepMemory.c
msgid "Unable to write to sleep_memory."
msgstr ""

#: ports/nrf/common-hal/_bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr ""

#: ports/espressif/common-hal/ssl/SSLSocket.c
#, c-format
msgid "Unhandled ESP TLS error %d %d %x %d"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error at %s:%d: %d"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error: %d"
msgstr ""

#: shared-bindings/wifi/Radio.c
#, c-format
msgid "Unknown failure %d"
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr ""

#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error at %s:%d: %d"
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %04x"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %d"
msgstr ""

#: ports/raspberrypi/common-hal/wifi/__init__.c
#, c-format
msgid "Unkown error code %d"
msgstr ""

#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
#: shared-module/_pixelmap/PixelMap.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "Unsupported colorspace"
msgstr ""

#: shared-module/displayio/display_core.c
msgid "Unsupported display bus type"
msgstr ""

#: shared-module/audiocore/WaveFile.c
msgid "Unsupported format"
msgstr ""

#: shared-bindings/hashlib/__init__.c
msgid "Unsupported hash algorithm"
msgstr ""

#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Update Failed"
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length != required fixed length"
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length > max_length"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Version was invalid"
msgstr ""

#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""

#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""

#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer is not currently running"
msgstr ""

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
msgstr ""

#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Visit circuitpython.org for more information.\n"
"\n"
"To list built-in modules type `help(\"modules\")`.\n"
msgstr ""

#: supervisor/shared/web_workflow/web_workflow.c
msgid "Wi-Fi: "
msgstr ""

#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Wifi is in access point mode."
msgstr ""

#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Wifi is in station mode."
msgstr ""

#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Wifi is not enabled"
msgstr ""

#: main.c
msgid "Woken up by alarm.\n"
msgstr ""

#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr ""

#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
msgid "You pressed both buttons at start up."
msgstr ""

#: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
#: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
#: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
msgid "You pressed button A at start up."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "You pressed the BOOT button at start up"
msgstr ""

#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
msgid "You pressed the SW38 button at start up."
msgstr ""

#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
msgid "You pressed the VOLUME button at start up."
msgstr ""

#: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
msgid "You pressed the central button at start up."
msgstr ""

#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
msgid "You pressed the left button at start up."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "You pressed the reset button during boot."
msgstr ""

#: supervisor/shared/micropython.c
msgid "[truncated due to length]"
msgstr ""

#: py/objtype.c
msgid "__init__() should return None"
msgstr ""

#: py/objtype.c
msgid "__init__() should return None, not '%q'"
msgstr ""

#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr ""

#: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c
msgid "a bytes-like object is required"
msgstr ""

#: shared-bindings/i2ctarget/I2CTarget.c
msgid "addresses is empty"
msgstr ""

#: py/compile.c
msgid "annotation must be an identifier"
msgstr ""

#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""

#: py/objobject.c
msgid "arg must be user-type"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "argsort argument must be an ndarray"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""

#: py/runtime.c shared-bindings/supervisor/__init__.c
msgid "argument has wrong type"
msgstr ""

#: py/compile.c
msgid "argument name reused"
msgstr ""

#: py/argcheck.c shared-bindings/_stage/__init__.c
#: shared-bindings/digitalio/DigitalInOut.c
msgid "argument num/types mismatch"
msgstr ""

#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/numpy/transform.c
msgid "arguments must be ndarrays"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "array has too many dimensions"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "array is too big"
msgstr ""

#: py/objarray.c shared-bindings/alarm/SleepMemory.c
#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""

#: py/objstr.c
msgid "attributes not supported yet"
msgstr ""

#: extmod/ulab/code/ulab_tools.c
msgid "axis is out of bounds"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
msgid "axis must be None, or an integer"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "axis too long"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "background value out of range of target"
msgstr ""

#: py/builtinevex.c
msgid "bad compile mode"
msgstr ""

#: py/objstr.c
msgid "bad conversion specifier"
msgstr ""

#: py/objstr.c
msgid "bad format string"
msgstr ""

#: py/binary.c py/objarray.c
msgid "bad typecode"
msgstr ""

#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "bitmap sizes must match"
msgstr ""

#: extmod/modurandom.c
msgid "bits must be 32 or less"
msgstr ""

#: shared-bindings/audiomixer/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr ""

#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr ""

#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer is smaller than requested size"
msgstr ""

#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer size must be a multiple of element size"
msgstr ""

#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr ""

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr ""

#: py/modstruct.c shared-bindings/struct/__init__.c
#: shared-module/struct/__init__.c
msgid "buffer too small"
msgstr ""

#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "buffer too small for requested bytes"
msgstr ""

#: py/objarray.c
msgid "bytes length not a multiple of item size"
msgstr ""

#: py/objstr.c
msgid "bytes value out of range"
msgstr ""

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is out of range"
msgstr ""

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr ""

#: shared-module/vectorio/Circle.c shared-module/vectorio/Polygon.c
#: shared-module/vectorio/Rectangle.c
msgid "can only have one parent"
msgstr ""

#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr ""

#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr ""

#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr ""

#: py/compile.c
msgid "can't assign to expression"
msgstr ""

#: extmod/moduasyncio.c
msgid "can't cancel self"
msgstr ""

#: py/obj.c py/objint.c py/runtime.c shared-module/adafruit_pixelbuf/PixelBuf.c
msgid "can't convert %q to %q"
msgstr ""

#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr ""

#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "can't convert complex to float"
msgstr ""

#: py/obj.c
msgid "can't convert to %q"
msgstr ""

#: py/obj.c
msgid "can't convert to complex"
msgstr ""

#: py/runtime.c
msgid "can't convert to int"
msgstr ""

#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr ""

#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr ""

#: py/compile.c
msgid "can't delete expression"
msgstr ""

#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr ""

#: py/objcomplex.c
msgid "can't do truncated division of a complex number"
msgstr ""

#: py/compile.c
msgid "can't have multiple **x"
msgstr ""

#: py/compile.c
msgid "can't have multiple *x"
msgstr ""

#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr ""

#: py/emitnative.c
msgid "can't load from '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr ""

#: py/builtinimport.c
msgid "can't perform relative import"
msgstr ""

#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "can't set 512 block size"
msgstr ""

#: py/objexcept.c py/objnamedtuple.c
msgid "can't set attribute"
msgstr ""

#: py/runtime.c
msgid "can't set attribute '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't store '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't store to '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr ""

#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""

#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "cannot assign new shape"
msgstr ""

#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex to dtype"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex type"
msgstr ""

#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""

#: py/objtype.c
msgid "cannot create instance"
msgstr ""

#: py/runtime.c
msgid "cannot import name %q"
msgstr ""

#: extmod/moductypes.c
msgid "cannot unambiguously get sizeof scalar"
msgstr ""

#: py/emitnative.c
msgid "casting"
msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "channel re-init"
msgstr ""

#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr ""

#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr ""

#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "clip point must be (x,y) tuple"
msgstr ""

#: shared-bindings/msgpack/ExtType.c
msgid "code outside range 0~127"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer, tuple, list, or int"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr ""

#: py/emitnative.c
msgid "comparison of int and uint"
msgstr ""

#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr ""

#: extmod/moduzlib.c
msgid "compression header"
msgstr ""

#: py/parse.c
msgid "constant must be an integer"
msgstr ""

#: py/emitnative.c
msgid "conversion to object"
msgstr ""

#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be linear arrays"
msgstr ""

#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be ndarrays"
msgstr ""

#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must not be empty"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "corrupted file"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "couldn't determine SD card version"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be iterable"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be of equal length"
msgstr ""

#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "data pin #%d in use"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "data type not understood"
msgstr ""

#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""

#: py/compile.c
msgid "default 'except' must be last"
msgstr ""

#: shared-bindings/msgpack/__init__.c
msgid "default is not a function"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr ""

#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "diff argument must be an ndarray"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "differentiation order out of range"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "dimensions do not match"
msgstr ""

#: py/emitnative.c
msgid "div/mod not implemented for uint"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "divide by zero"
msgstr ""

#: py/runtime.c
msgid "division by zero"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "dtype must be float, or complex"
msgstr ""

#: py/objdeque.c
msgid "empty"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "empty file"
msgstr ""

#: extmod/moduasyncio.c extmod/moduheapq.c extmod/modutimeq.c
msgid "empty heap"
msgstr ""

#: py/objstr.c
msgid "empty separator"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr ""

#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""

#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr ""

#: ports/espressif/common-hal/espcamera/Camera.c
msgid ""
"espcamera.Camera requires reserved PSRAM to be configured. See the "
"documentation for instructions."
msgstr ""

#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr ""

#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr ""

#: py/obj.c
msgid "expected tuple/list"
msgstr ""

#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr ""

#: py/compile.c
msgid "expecting an assembler instruction"
msgstr ""

#: py/compile.c
msgid "expecting just a value for set"
msgstr ""

#: py/compile.c
msgid "expecting key:value for dict"
msgstr ""

#: shared-bindings/msgpack/__init__.c
msgid "ext_hook is not a function"
msgstr ""

#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr ""

#: py/argcheck.c
msgid "extra positional arguments given"
msgstr ""

#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
#: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/synthio/__init__.c
#: shared-module/gifio/GifWriter.c
msgid "file must be a file opened in byte mode"
msgstr ""

#: shared-bindings/traceback/__init__.c
msgid "file write is not available"
msgstr ""

#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "first argument must be a callable"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "first argument must be a function"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""

#: extmod/ulab/code/numpy/transform.c extmod/ulab/code/numpy/vector.c
msgid "first argument must be an ndarray"
msgstr ""

#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""

#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "first two arguments must be ndarrays"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "flip argument must be an ndarray"
msgstr ""

#: py/objint.c
msgid "float too big"
msgstr ""

#: py/nativeglue.c
msgid "float unsupported"
msgstr ""

#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr ""

#: py/objstr.c
msgid "format requires a dict"
msgstr ""

#: py/objdeque.c
msgid "full"
msgstr ""

#: py/argcheck.c
msgid "function doesn't take keyword arguments"
msgstr ""

#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr ""

#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "function has the same sign at the ends of interval"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray.c
msgid "function is implemented for ndarrays only"
msgstr ""

#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr ""

#: py/bc.c
msgid "function missing keyword-only argument"
msgstr ""

#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr ""

#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr ""

#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr ""

#: py/objgenerator.c
msgid "generator already executing"
msgstr ""

#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr ""

#: py/objgenerator.c py/runtime.c
msgid "generator raised StopIteration"
msgstr ""

#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr ""

#: extmod/moduhashlib.c
msgid "hash is final"
msgstr ""

#: extmod/moduheapq.c
msgid "heap must be a list"
msgstr ""

#: py/compile.c
msgid "identifier redefined as global"
msgstr ""

#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr ""

#: py/compile.c
msgid "import * not at module level"
msgstr ""

#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""

#: py/objstr.c
msgid "incomplete format"
msgstr ""

#: py/objstr.c
msgid "incomplete format key"
msgstr ""

#: extmod/modubinascii.c
msgid "incorrect padding"
msgstr ""

#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c
msgid "index is out of bounds"
msgstr ""

#: shared-bindings/_pixelmap/PixelMap.c
msgid "index must be tuple or int"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: shared-bindings/bitmaptools/__init__.c
msgid "index out of range"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""

#: ports/espressif/common-hal/busio/I2C.c
msgid "init I2C"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "initial values must be iterable"
msgstr ""

#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "initial_value length is wrong"
msgstr ""

#: py/compile.c
msgid "inline assembler must be a function"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "input argument must be an integer, a tuple, or a list"
msgstr ""

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "input array length must be power of 2"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "input arrays are not compatible"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "input data must be an iterable"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "input dtype must be float or complex"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "input matrix is asymmetric"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "input matrix is singular"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "input must be 1- or 2-d"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be a 1D ndarray"
msgstr ""

#: extmod/ulab/code/scipy/linalg/linalg.c extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""

#: extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be an ndarray, or a scalar"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "input must be one-dimensional"
msgstr ""

#: extmod/ulab/code/ulab_tools.c
msgid "input must be square matrix"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "input vectors must be of equal length"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "inputs are not iterable"
msgstr ""

#: extmod/ulab/code/numpy/approx.c
msgid "interp is defined for 1D iterables of equal length"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
#, c-format
msgid "interval must be in range %s-%s"
msgstr ""

#: py/compile.c
msgid "invalid architecture"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid bits_per_pixel %d, must be, 1, 2, 4, 8, 16, 24, or 32"
msgstr ""

#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "invalid cert"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element size %d for bits_per_pixel %d\n"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element_size %d, must be, 1, 2, or 4"
msgstr ""

#: shared-bindings/traceback/__init__.c
msgid "invalid exception"
msgstr ""

#: extmod/modframebuf.c
msgid "invalid format"
msgstr ""

#: py/objstr.c
msgid "invalid format specifier"
msgstr ""

#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr ""

#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "invalid key"
msgstr ""

#: py/compile.c
msgid "invalid micropython decorator"
msgstr ""

#: ports/espressif/common-hal/espcamera/Camera.c
msgid "invalid setting"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr ""

#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr ""

#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr ""

#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr ""

#: py/parsenum.c
msgid "invalid syntax for number"
msgstr ""

#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""

#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "iterations did not converge"
msgstr ""

#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""

#: py/argcheck.c
msgid "keyword argument(s) not yet implemented - use normal args instead"
msgstr ""

#: py/bc.c
msgid "keywords must be strings"
msgstr ""

#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr ""

#: py/compile.c
msgid "label redefined"
msgstr ""

#: py/stream.c
msgid "length argument not allowed for this type"
msgstr ""

#: shared-bindings/audiomixer/MixerVoice.c
msgid "level must be between 0 and 1"
msgstr ""

#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr ""

#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr ""

#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr ""

#: py/vm.c
msgid "local variable referenced before assignment"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr ""

#: ports/espressif/common-hal/mdns/Server.c
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "mDNS already initialized"
msgstr ""

#: ports/espressif/common-hal/mdns/Server.c
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "mDNS only works with built-in WiFi"
msgstr ""

#: py/parse.c
msgid "malformed f-string"
msgstr ""

#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr ""

#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "matrix is not positive definite"
msgstr ""

#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is "
msgstr ""

#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter must be > 0"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter should be > 0"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "median argument must be an ndarray"
msgstr ""

#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr ""

#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr ""

#: py/objarray.c
msgid "memoryview: length is not a multiple of itemsize"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "mode must be complete, or reduced"
msgstr ""

#: py/builtinimport.c
msgid "module not found"
msgstr ""

#: ports/espressif/common-hal/wifi/Monitor.c
msgid "monitor init failed"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "more degrees of freedom than data points"
msgstr ""

#: py/compile.c
msgid "multiple *x in assignment"
msgstr ""

#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr ""

#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr ""

#: py/emitnative.c
msgid "must raise an object"
msgstr ""

#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr ""

#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""

#: py/runtime.c
msgid "name not defined"
msgstr ""

#: py/asmthumb.c
msgid "native method too big"
msgstr ""

#: py/emitnative.c
msgid "native yield"
msgstr ""

#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr ""

#: py/modmath.c
msgid "negative factorial"
msgstr ""

#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
msgstr ""

#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
msgstr ""

#: shared-bindings/_pixelmap/PixelMap.c
msgid "nested index must be int"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "no SD card"
msgstr ""

#: py/vm.c
msgid "no active exception to reraise"
msgstr ""

#: py/compile.c
msgid "no binding for nonlocal found"
msgstr ""

#: shared-module/msgpack/__init__.c
msgid "no default packer"
msgstr ""

#: extmod/modurandom.c
msgid "no default seed"
msgstr ""

#: py/builtinimport.c
msgid "no module named '%q'"
msgstr ""

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/paralleldisplay/ParallelBus.c
msgid "no reset pin available"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "no response from SD card"
msgstr ""

#: ports/espressif/common-hal/espcamera/Camera.c py/objobject.c py/runtime.c
msgid "no such attribute"
msgstr ""

#: ports/espressif/common-hal/_bleio/Connection.c
#: ports/nrf/common-hal/_bleio/Connection.c
msgid "non-UUID found in service_uuids_whitelist"
msgstr ""

#: py/compile.c
msgid "non-default argument follows default argument"
msgstr ""

#: extmod/modubinascii.c
msgid "non-hex digit found"
msgstr ""

#: py/compile.c
msgid "non-keyword arg after */**"
msgstr ""

#: py/compile.c
msgid "non-keyword arg after keyword arg"
msgstr ""

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "non-zero timeout must be > 0.01"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "non-zero timeout must be >= interval"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""

#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr ""

#: py/objstr.c
msgid "not enough arguments for format string"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray_tools.c
msgid "not implemented for complex dtype"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "number of points must be at least 2"
msgstr ""

#: py/builtinhelp.c
msgid "object "
msgstr ""

#: py/obj.c
#, c-format
msgid "object '%s' isn't a tuple or list"
msgstr ""

#: py/obj.c
msgid "object doesn't support item assignment"
msgstr ""

#: py/obj.c
msgid "object doesn't support item deletion"
msgstr ""

#: py/obj.c
msgid "object has no len"
msgstr ""

#: py/obj.c
msgid "object isn't subscriptable"
msgstr ""

#: py/runtime.c
msgid "object not an iterator"
msgstr ""

#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr ""

#: py/sequence.c shared-bindings/displayio/Group.c
msgid "object not in sequence"
msgstr ""

#: py/runtime.c
msgid "object not iterable"
msgstr ""

#: py/obj.c
#, c-format
msgid "object of type '%s' has no len()"
msgstr ""

#: py/obj.c
msgid "object with buffer protocol required"
msgstr ""

#: extmod/modubinascii.c
msgid "odd-length string"
msgstr ""

#: supervisor/shared/web_workflow/web_workflow.c
msgid "off"
msgstr ""

#: extmod/ulab/code/utils/utils.c
msgid "offset is too large"
msgstr ""

#: shared-bindings/dualbank/__init__.c
msgid "offset must be >= 0"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "offset must be non-negative and no greater than buffer length"
msgstr ""

#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""

#: ports/nrf/common-hal/audiobusio/PDMIn.c
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only bit_depth=16 is supported"
msgstr ""

#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only mono is supported"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "only ndarrays can be concatenated"
msgstr ""

#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only oversample=64 is supported"
msgstr ""

#: ports/nrf/common-hal/audiobusio/PDMIn.c
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only sample_rate=16000 is supported"
msgstr ""

#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
#: shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr ""

#: py/vm.c
msgid "opcode"
msgstr ""

#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/compare.c
#: extmod/ulab/code/numpy/vector.c
msgid "operands could not be broadcast together"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for 2D arrays only"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for ndarrays only"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr ""

#: py/modbuiltins.c
msgid "ord expects a character"
msgstr ""

#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr ""

#: extmod/ulab/code/utils/utils.c
msgid "out array is too small"
msgstr ""

#: extmod/ulab/code/utils/utils.c
msgid "out must be a float dense array"
msgstr ""

#: shared-bindings/displayio/Bitmap.c
msgid "out of range of source"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "out of range of target"
msgstr ""

#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr ""

#: py/modstruct.c
#, c-format
msgid "pack expected %d items for packing (got %d)"
msgstr ""

#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr ""

#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr ""

#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "pixel coordinates out of bounds"
msgstr ""

#: shared-bindings/displayio/Bitmap.c
msgid "pixel value requires too many bits"
msgstr ""

#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
msgstr ""

#: extmod/vfs_posix_file.c
msgid "poll on file not available on win32"
msgstr ""

#: ports/espressif/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr ""

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c
#: shared-bindings/ps2io/Ps2.c
msgid "pop from empty %q"
msgstr ""

#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "port must be >= 0"
msgstr ""

#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr ""

#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "pull masks conflict with direction masks"
msgstr ""

#: extmod/modutimeq.c
msgid "queue overflow"
msgstr ""

#: py/parse.c
msgid "raw f-strings are not supported"
msgstr ""

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "real and imaginary parts must be of equal length"
msgstr ""

#: py/builtinimport.c
msgid "relative import"
msgstr ""

#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""

#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""

#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""

#: py/objstr.c
msgid "rsplit(None,n)"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr ""

#: py/modmicropython.c
msgid "schedule queue full"
msgstr ""

#: py/builtinimport.c
msgid "script compilation not supported"
msgstr ""

#: py/nativeglue.c
msgid "set unsupported"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "shape must be a tuple"
msgstr ""

#: shared-module/msgpack/__init__.c
msgid "short read"
msgstr ""

#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr ""

#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr ""

#: extmod/ulab/code/ulab_tools.c
msgid "size is defined for ndarrays only"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "slice step can't be zero"
msgstr ""

#: py/nativeglue.c
msgid "slice unsupported"
msgstr ""

#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr ""

#: main.c
msgid "soft reboot\n"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos[:, 3] should be all ones"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "sosfilt requires iterable arguments"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "source palette too large"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 2 or 65536"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 65536"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 8"
msgstr ""

#: py/objstr.c
msgid "start/end indices"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr ""

#: py/stream.c shared-bindings/getpass/__init__.c
msgid "stream operation not supported"
msgstr ""

#: py/stream.c
msgid "string not supported; use bytes or bytearray"
msgstr ""

#: extmod/moductypes.c
msgid "struct: can't index"
msgstr ""

#: extmod/moductypes.c
msgid "struct: index out of range"
msgstr ""

#: extmod/moductypes.c
msgid "struct: no fields"
msgstr ""

#: py/objarray.c py/objstr.c
msgid "substring not found"
msgstr ""

#: py/compile.c
msgid "super() can't find self"
msgstr ""

#: extmod/modujson.c
msgid "syntax error in JSON"
msgstr ""

#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr ""

#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "timeout must be < 655.35 secs"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v1 card"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v2 card"
msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "timer re-init"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""

#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""

#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/create.c
msgid "too many dimensions"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr ""

#: py/asmthumb.c
msgid "too many locals for native method"
msgstr ""

#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr ""

#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""

#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D iterables"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
msgid "tx and rx cannot both be None"
msgstr ""

#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr ""

#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr ""

#: py/objgenerator.c py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr ""

#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr ""

#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr ""

#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr ""

#: py/parse.c
msgid "unexpected indent"
msgstr ""

#: py/bc.c
msgid "unexpected keyword argument"
msgstr ""

#: py/bc.c py/objnamedtuple.c shared-bindings/traceback/__init__.c
msgid "unexpected keyword argument '%q'"
msgstr ""

#: py/lexer.c
msgid "unicode name escapes"
msgstr ""

#: py/parse.c
msgid "unindent doesn't match any outer indent level"
msgstr ""

#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr ""

#: py/objstr.c
msgid "unknown format code '%c' for object of type '%q'"
msgstr ""

#: py/compile.c
msgid "unknown type"
msgstr ""

#: py/compile.c
msgid "unknown type '%q'"
msgstr ""

#: py/objstr.c
#, c-format
msgid "unmatched '%c' in format"
msgstr ""

#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr ""

#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
msgid "unsupported %q type"
msgstr ""

#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr ""

#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr ""

#: shared-module/gifio/GifWriter.c
msgid "unsupported colorspace for GifWriter"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "unsupported colorspace for dither"
msgstr ""

#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr ""

#: py/runtime.c
msgid "unsupported type for %q: '%q'"
msgstr ""

#: py/runtime.c
msgid "unsupported type for operator"
msgstr ""

#: py/runtime.c
msgid "unsupported types for %q: '%q', '%q'"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "usecols is too high"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "usecols keyword must be specified"
msgstr ""

#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "value out of range of target"
msgstr ""

#: shared-bindings/displayio/Bitmap.c
msgid "value_count must be > 0"
msgstr ""

#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""

#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "width must be greater than zero"
msgstr ""

#: ports/espressif/common-hal/wifi/Radio.c
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "wifi is not enabled"
msgstr ""

#: ports/raspberrypi/common-hal/wifi/Monitor.c
msgid "wifi.Monitor not available"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "wrong axis index"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "wrong axis specified"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "wrong dtype"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "wrong index type"
msgstr ""

#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/create.c
#: extmod/ulab/code/numpy/io/io.c extmod/ulab/code/numpy/transform.c
#: extmod/ulab/code/numpy/vector.c
msgid "wrong input type"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of condition array"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of index array"
msgstr ""

#: extmod/ulab/code/numpy/create.c py/objarray.c py/objstr.c
msgid "wrong number of arguments"
msgstr ""

#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "wrong output type"
msgstr ""

#: shared-module/displayio/Shape.c
msgid "x value out of bounds"
msgstr ""

#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "xTaskCreate failed"
msgstr ""

#: shared-module/displayio/Shape.c
msgid "y value out of bounds"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be an ndarray"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of float type"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of shape (n_section, 2)"
msgstr ""

#~ msgid ""
#~ "\n"
#~ "Please file an issue with the contents of your CIRCUITPY drive at \n"
#~ "https://github.com/adafruit/circuitpython/issues\n"
#~ msgstr ""
#~ "\n"
#~ "Prosím vytvořte tiket s obsahem vaší jednotky CIRCUITPY na adrese\n"
#~ "https://github.com/adafruit/circuitpython/issues\n"

#~ msgid "Attempted heap allocation when VM not running."
#~ msgstr "Pokus o alokaci haldy, když neběží VM."

#~ msgid "Boot device must be first device (interface #0)."
#~ msgstr "Bootovací zařízení musí být první (rozhraní #0)."

#~ msgid "CircuitPython was unable to allocate the heap."
#~ msgstr "CircuitPython nedokázal alokovat haldu."

#~ msgid "Crash into the HardFault_Handler."
#~ msgstr "Pád do HardFault_Handler."

#~ msgid "Fatal error."
#~ msgstr "Fatální chyba."

#~ msgid "Invalid memory access."
#~ msgstr "Neplatný přístup k paměti."

#~ msgid "%q must be of type %q"
#~ msgstr "%q musí být typu %q"

#~ msgid "%q must be of type %q or None"
#~ msgstr "%q musí být typu %q nebo None"

#~ msgid "Expected a %q"
#~ msgstr "Očekává se %q"

#, c-format
#~ msgid "IV must be %d bytes long"
#~ msgstr "IV musí být dlouhé %d bajtů"

#~ msgid "%q length must be >= 1"
#~ msgstr "%q délka musí být >= 1"

#~ msgid "%q must be a string"
#~ msgstr "%q musí být string"

#~ msgid "%q must be an int"
#~ msgstr "%q musí být int"

#~ msgid "%q with a report ID of 0 must be of length 1"
#~ msgstr "%q s ID 0 musím být délky 1"

#~ msgid "At most %d %q may be specified (not %d)"
#~ msgstr "Lze zadat maximálně %d %q (nikoli %d)"

#~ msgid "Invalid pins"
#~ msgstr "Neplatné piny"

#, c-format
#~ msgid "No more than %d HID devices allowed"
#~ msgstr "Ne více než %d HID zařízení je povoleno"

#~ msgid "%q indices must be integers, not %s"
#~ msgstr "Indexy %q musí být celá čísla, nikoli %s"

#~ msgid "Firmware image is invalid"
#~ msgstr "Obraz firmwaru je nevalidní"

#~ msgid "%q must be >= 0"
#~ msgstr "%q musí být >= 0"

#~ msgid "%q must be >= 1"
#~ msgstr "%q musí být > = 1"

#~ msgid "Failed to init wifi"
#~ msgstr "Chyba inicializace WiFi"

#~ msgid "%q must be a tuple of length 2"
#~ msgstr "%q musí být n-tice délky 2"

#~ msgid "%q must be between %d and %d"
#~ msgstr "%q musí být mezi %d a %d"

#~ msgid "%q should be an int"
#~ msgstr "%q by měl být int"

#~ msgid ""
#~ "\n"
#~ "Code stopped by auto-reload.\n"
#~ msgstr ""
#~ "\n"
#~ "Program byl zastaven automatickým načtením.\n"

#~ msgid "%q list must be a list"
#~ msgstr "Seznam %q musí být seznam"

#~ msgid "%q indices must be integers, not %q"
#~ msgstr "Indexy %q musí být celá čísla, ne %q"

#~ msgid "'%q' object cannot assign attribute '%q'"
#~ msgstr "'%q' nemůže přiřadit atribut '%q'"

#~ msgid "'%q' object does not support item assignment"
#~ msgstr "Objekt '%q' nepodporuje přiřazení položek"

#~ msgid "'%q' object does not support item deletion"
#~ msgstr "Objekt '%q' nepodporuje mazání položek"

#~ msgid "'%q' object has no attribute '%q'"
#~ msgstr "Objekt '%q' nemá žádný atribut"

#~ msgid "'%q' object is not subscriptable"
#~ msgstr "Objekt '%q' nelze zapsat"

#~ msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
#~ msgstr "%d adresní piny a %d rgb piny označují výšku %d, nikoli %d"

#~ msgid ""
#~ "\n"
#~ "Code done running. Waiting for reload.\n"
#~ msgstr ""
#~ "\n"
#~ "Kód byl dokončen. Čekám na opětovné nahrání.\n"

#~ msgid ""
#~ "\n"
#~ "To exit, please reset the board without "
#~ msgstr ""
#~ "\n"
#~ "Pro ukončení, prosím resetujte desku bez "