Szymon Klause
c9aa50817c
add UARTLogger2 board support for CircuitPython
2020-03-13 21:39:17 +01:00
Scott Shawcroft
4fba4eb133
Switch from 1k RTC input to 32k output
2020-03-13 11:16:41 -07:00
Scott Shawcroft
48b5f2a384
Initial work on SAMD
2020-03-13 11:16:41 -07:00
Dan Halbert
6363b5ad06
Merge pull request #2693 from jepler/ulab-enable
...
ulab: enable on most builds
2020-03-10 09:48:46 -04:00
Jeff Epler
03a2b2faf1
ulab: don't enable on m0 boards
2020-03-09 23:00:21 -05:00
Dan Halbert
210c3274e5
Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup
2020-03-05 17:47:01 -05:00
Thea Flowers
409a4a9490
Disable the HID USB descriptor for Sol
...
It's not used and ends up being confusing for folks.
2020-03-04 23:22:46 -08:00
Dan Halbert
8435935429
update uses of assert_pin_free; remove redundant checks
2020-02-29 15:37:32 -05:00
Dan Halbert
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
Jeff Epler
fa3b9eba92
ulab: Incorporate it
2020-02-27 11:03:03 -06:00
jepler
f20255813f
samd51 thing plus: new port
...
testing performed:
* successfully store and retrieve a 500kB file on the flash
* square wave output on each pin appears on o'scope
* board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
Dan Halbert
dcc8abf74e
Merge pull request #2638 from fgallaire/master
...
Arduino Nano 33 IoT support
2020-02-22 00:12:06 -05:00
Florent Gallaire
96db16a7a2
Last NINA pins
2020-02-22 04:30:18 +01:00
Florent Gallaire
39ec5d0e51
Add NINA pins
2020-02-21 01:34:52 +01:00
Scott Shawcroft
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485
...
Addition of RTS/CTS/RS485 capability
2020-02-19 10:35:57 -08:00
Florent Gallaire
fba0b302ff
Add Arduino Nano 33 IoT support
2020-02-19 08:56:06 +01:00
Florent Gallaire
63bcd52a5a
Add Arduino Nano 33 IoT documentation
2020-02-19 08:50:27 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master
...
New board: PyCubed + updates to SAM32 board
2020-02-18 22:01:41 -05:00
Dave Marples
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
Max Holliday
2b79d8ffe9
adding PWM to board.c for external WDT
2020-02-18 14:16:54 -08:00
Max Holliday
93760042fa
no current need for NVM
2020-02-16 11:43:19 -08:00
Dan Halbert
dc97b0d844
correct chec^Cfor flash erase boundaries
2020-02-13 17:41:05 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
Max Holliday
b91c4e66cb
adding Adafruit_CircuitPython_Register to frozen + updating SAM32
2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e
adding new board - PyCubed
...
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
2020-02-08 15:33:25 -08:00
Scott Shawcroft
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement
...
Monotonic ns improvement; time.sleep rounds to nearest msec
2020-02-07 11:03:37 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master
...
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-07 12:59:30 -05:00
Dan Halbert
005c4caf8c
fix function defs for compiler
2020-02-07 10:32:37 -05:00
Dan Halbert
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
Lady Ada
789e311b63
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-06 16:28:02 -05:00
neubauek
d93d491a61
Cleaned up CircuitBrains Basic and Deluxe board definitions
2020-02-06 14:47:22 -06:00
James Bowman
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
neubauek
f3188669e4
Added CircuitBrains Basic and Deluxe Boards
2020-02-05 14:52:47 -06:00
Dan Halbert
a4ebd2f7c1
allow tuple or list for Palette color
2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
Dan Halbert
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
Dan Halbert
3b95d7c16a
add gamepad to specialty cpx builds; update frozen libs
2020-01-30 21:00:47 -05:00
Scott Shawcroft
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf
2020-01-30 10:59:21 -08:00
Scott Shawcroft
5d24ade5c9
Tweak error messages to reduce code size.
2020-01-29 17:32:07 -08:00
hierophect
898f4e1f72
Merge branch 'master' into stm32-meowbit
2020-01-29 16:32:08 -05:00
Lucian Copeland
100409961a
Move board_init to main.c
2020-01-29 16:29:43 -05:00
Scott Shawcroft
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma
...
samd: When possible, use one DMA channel for stereo AudioOut
2020-01-27 14:15:26 -08:00
Scott Shawcroft
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev
...
Refine iMX RT memory layout and add three boards
2020-01-27 14:11:08 -08:00
Jeff Epler
c8f969feb5
samd: audio-dma: avoid memory allocations
...
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations. This was
enough to cause MemoryErrors with regularity.
By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
2020-01-27 08:49:41 -06:00
Jeff Epler
cb6193bbc7
samd: When possible, use one DMA channel for stereo AudioOut
...
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time. This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half. (the number of bytes transferred
remains the same, though)
In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values. However, this is the
case that matters for stereo mp3 playback on PyGamer.
Testing performed: Listened to some tracks with good stereo separation.
2020-01-26 15:36:24 -06:00
Dan Halbert
6f13979c9b
pygamer and pybadge boards were not resetting neopixels
2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992
reset NeoPixels on CPB on soft reload
2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6
2020-01-23 12:32:19 -05:00
ndgarage
4675783545
change-name-to-ndgarage_ndbit6
2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc
init nfc copy
2020-01-22 20:30:33 -06:00
Dan Halbert
4923caf85e
Increase CPX stack size by 256
2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8
Merge remote-tracking branch 'origin/master' into capablerobot-usbhub
2020-01-20 13:11:57 -05:00
Scott Shawcroft
1c39606345
Fix other builds missing new heap bounds functions
2020-01-18 18:06:56 -08:00
Scott Shawcroft
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm
...
nrf: Add bonding to BLE pairing support
2020-01-15 16:11:09 -08:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed
...
CircuitPython support for the Open Book
2020-01-15 17:21:19 -05:00
dalegrover
d6e657b593
Initial commit.
2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247
add support for the Open Book
2020-01-14 16:34:46 -05:00
scs217
50e718be99
second revision to line breaks for visibility per dhalbert
2020-01-13 22:13:39 -05:00
scs217
18957786f2
inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert
2020-01-13 22:00:42 -05:00
scs217
c735289ddf
Added Dxx names to analog pins on Feather M4 Express pins.c file
2020-01-13 21:19:17 -05:00
Dan Halbert
2a75196aa3
merge from adafruit/circuitpython
2020-01-13 18:15:32 -05:00
Dan Halbert
189f2d5f07
Make requiring I2C pullups be optional
2020-01-09 17:31:50 -05:00
Scott Shawcroft
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes
...
Fixes for JEplayer
2020-01-08 12:50:13 -08:00
Scott Shawcroft
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2
...
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
2020-01-07 12:08:59 -08:00
Radomir Dopieralski
59ded1131f
Take display offsets for PewPew M4 from the bootloader config
...
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
2020-01-06 14:24:30 +01:00
Marius-450
3ad3d49959
changes only for monster m4sk
2020-01-04 12:32:49 -05:00
Dan Halbert
242d572470
wip
2020-01-03 10:24:07 -05:00
Jeff Epler
bd8650d35b
samd/peripherals: take upstream update
2020-01-02 17:55:50 -06:00
Dan Halbert
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update
...
Update the PewPew M4 board and circuitpython-stage
2020-01-01 13:59:02 -05:00
Scott Shawcroft
0223589e6c
Fix default UART too
2019-12-30 11:34:51 -08:00
Scott Shawcroft
e1d026f815
Update pins.c
2019-12-30 11:33:04 -08:00
hathach
62c4028cde
sync with https://github.com/hathach/tinyusb/pull/246
...
should fix slow enumeration
2019-12-26 23:04:16 +07:00
Jeff Epler
5aa3e3eabb
samd/peripherals: update
2019-12-24 09:36:19 -06:00
Radomir Dopieralski
b06057395b
Update PewPew M4
...
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
2019-12-23 18:37:36 +01:00
Scott Shawcroft
f60b6481e0
Turn off gamepad on cpx crickit
2019-12-20 12:14:27 -08:00
Scott Shawcroft
b859e2b710
Remove re from CPX Displayio build to make space.
2019-12-20 11:43:56 -08:00
Jeff Epler
d31a387ace
circuitplayground_express_displayio: reduce inlining to make .ko translation fit
2019-12-19 16:11:29 -06:00
ndgarage
16688180c6
add-ndbit6
2019-12-19 07:17:43 -07:00
Dan Halbert
81581b345c
Increase CPX stack size slightly
2019-12-16 17:25:22 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master
2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk
2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk
2019-12-16 12:18:16 +05:00
Dan Halbert
e11fabd5e0
moved nrf internal filesystem to just below bootloader
2019-12-12 14:57:23 -05:00
Dan Halbert
ae64a669dd
address review comments
2019-12-11 15:43:06 -05:00
Dan Halbert
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
Jeff Epler
a08d9e6d8e
audiocore: Add MP3File using Adafruit_MP3 library
2019-12-10 14:03:06 -06:00
Jeff Epler
1905d0746d
samd: neopixel: Fix neopixels after #2297
...
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.
This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)
Testing performed on a Metro M4:
* measured timings using o'scope and found all values within
datasheet tolerance.
* Drove a string of 96 neopixels without visible glitches
* on-board neopixel worked
Testing performed on a Circuit Playground Express (M0):
* Color wheel code works on built-in neopixels
* Color wheel code works on 96 neopixel strip
As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)
Closes : #2297
2019-12-07 19:19:45 -06:00
Dan Halbert
d628d2a261
atmel-samd working
2019-12-06 15:18:20 -05:00
Dan Halbert
40434d6919
wip
2019-12-05 22:45:53 -05:00
Scott Shawcroft
fce81e6868
Merge pull request #2297 from jepler/tick-refactor
...
Call background tasks only once per ms
2019-12-02 16:45:51 -08:00
Jeff Epler
002f5c0f1c
samd: trinket_m0: make board fit again
2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9
2019-12-02 07:27:03 -06:00
Jeff Epler
95d9c49e43
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-29 11:27:09 -06:00
Jeff Epler
d843156a5e
samd: Consolidate small build optimization flags
...
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a
Squeeze pyruler zh_Latn_pinyin
2019-11-27 14:47:35 -05:00
Dan Halbert
b32a9192df
make UART.write be blocking on SAMD; add timeout property
2019-11-27 13:05:29 -05:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master
...
Add shIRtty board
2019-11-26 15:23:56 -05:00
Dan Halbert
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name
...
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 15:17:14 -05:00
Thea Flowers
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol
2019-11-26 10:59:12 -08:00
Thomas Sarlandie
2647ea0754
fix: disable touchio to save some space
2019-11-26 19:26:18 +01:00
Scott Shawcroft
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space
...
Once we use PixelBuf, the library will be much smaller.
2019-11-26 09:31:44 -08:00
Jeff Epler
82f55dc046
atmel-samd: reduce inlining on constrained boards again
...
pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0
now has just 76 bytes flash available.
2019-11-26 08:50:55 -06:00
Jeff Epler
3ed6de7baf
atmel-samd: reduce inlining on pyruler again
...
By tweaking the optimizer flags further, this build also fits
2019-11-26 08:50:55 -06:00
Jeff Epler
2e4a6b94e7
atmel-samd: get most constrained m0 builds to work again
...
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
2019-11-26 08:50:45 -06:00
Thomas Sarlandie
11dc572bce
feature: our own PID - thanks @ladyada
2019-11-25 21:56:42 +01:00
Thomas Sarlandie
fc71ed9789
add shirtty board - hackaday supercon 2019 addon
2019-11-25 17:44:41 +01:00
Dan Halbert
1ccb7b4c5e
cosmetic commit, mostly to re-run
2019-11-22 16:30:10 -05:00
Dan Halbert
13375d16f1
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk
2019-11-22 15:44:51 -05:00
Jeff Epler
77b78d7fb9
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-22 14:28:51 -06:00
Dan Halbert
e18d3e0f76
Merge branch 'master' into m4-network-ps2io
2019-11-22 15:02:52 -05:00
Dan Halbert
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
wallarug
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
Jeff Epler
40a47d41df
samd: background: Allow monitoring time taken in background task
...
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
2019-11-18 11:01:24 -06:00
Jeff Epler
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
Hierophect
81223c76bd
revert error
2019-11-15 13:04:25 -05:00
Hierophect
2c6781f74d
move neopixel_in_use flag to shared-bindings
2019-11-15 12:59:52 -05:00
Hierophect
de5691acf5
Add never_reset and reset to pin common hal, adjust files
2019-11-15 12:47:00 -05:00
KalbeAbbas
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
Scott Shawcroft
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c
...
nrf: allocate two I2C on CPB
2019-11-03 13:15:36 -08:00
Dan Halbert
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
brentru
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
brentru
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
ladyada
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
ladyada
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f
wip
2019-10-28 18:15:02 -04:00
Dan Halbert
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086
...
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
2019-10-28 14:50:01 -04:00
Thea Flowers
4b742f88d9
Fix spelling
2019-10-25 10:50:27 -07:00
Thea Flowers
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
...
Fixes #2086
When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
2019-10-23 14:34:14 -07:00
ProductDev
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
Kamil Tomaszewski
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
Scott Shawcroft
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
Dan Halbert
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
Chris Osterwood
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
Kamil Tomaszewski
7aefcc449a
Add an alternative way to number the USB endpoints
...
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
2019-10-07 12:31:42 +02:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
wallarug
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
wallarug
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
wallarug
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
wallarug
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
b7598f7058
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-09-19 14:20:28 -07:00
Scott Shawcroft
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51
2019-09-19 12:21:54 -07:00
Melissa LeBlanc-Williams
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
jepler
dffedd7c86
samd: peripherals: update submodule reference
2019-09-16 21:48:31 -05:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
jepler
61698eb5d8
AnalogOut / AudioOut: Copy settings from Arduino
...
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.
Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).
A fresh clock (6) is allocated for the new 12MHz clock. This matches
the Arduino value, though not the GCLK index.
Modify other settings to more closely resemble Arduino.
In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.
This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic
Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
2019-09-15 11:30:49 -05:00
Kattni Rembor
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
Dan Halbert
b8200d7295
fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use
2019-09-09 23:17:52 -04:00
Scott Shawcroft
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking
...
Samd dma tracking
2019-09-05 11:27:59 -07:00
Scott Shawcroft
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4
...
Add support for PewPew M4 board
2019-09-05 11:26:47 -07:00
Radomir Dopieralski
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
Dan Halbert
f3af2a6fb7
Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac
2019-09-04 21:56:13 -04:00
Dan Halbert
195de97c67
use only one endpoint pair for MSC except on SAMD21
2019-09-04 21:45:16 -04:00
Dan Halbert
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden
...
Add .hidden to TileGrid and Group
2019-09-04 15:48:00 -04:00
Scott Shawcroft
7951646b9a
Disable bitbangio on uGame10
2019-09-04 11:49:47 -07:00
sommersoft
c4d6f4f536
disable 'audiomixer' for all M0 boards
2019-09-01 17:39:20 -05:00
sommersoft
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
Scott Shawcroft
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
Scott Shawcroft
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
Scott Shawcroft
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
jepler
30a9346373
samd: audio_dma: Track channel allocation
...
Previously, we depended on allocated channels to always be
"dma_channel_enabled". However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.
((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)
Therefore,
* Add audio_dma_{allocate,free}_channel.
* audio_dma_free_channel implies audio_dma_disable_channel
* track via a new array audio_dma_allocated[]
* clear all allocated flags on soft-reboot
* Convert find_free_audio_dma_channel to audio_dma_allocate_channel
* use audio_dma_allocated[] instead of dma_channel_enabled() to check
availability
* remove find_free_audio_dma_channel
* For each one, find a matching audio_dma_disable_channel to convert
to audio_dma_free_channel
Closes : #2058
2019-08-28 17:00:22 -05:00
jepler
0b00787b4d
samd: AudioOut: ensure stopped before deinit
...
.. otherwise, a sequence like
>>> a = audioio.AudioOut(board.A0)
>>> a.play(sample, loop=True)
>>> a.deinit()
would potentially leave related DMA channel(s) active.
2019-08-28 16:43:55 -05:00
Scott Shawcroft
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
sommersoft
696117b048
disable audiomixer on boards it doesn't fit on
2019-08-25 14:53:34 -05:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
Scott Shawcroft
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
Scott Shawcroft
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
Scott Shawcroft
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
Scott Shawcroft
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
Scott Shawcroft
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
Scott Shawcroft
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
Scott Shawcroft
70680d5b22
EPaper displays work mostly.
2019-08-22 14:08:33 -07:00
Dan Halbert
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
Scott Shawcroft
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area
...
To displayio.Display: expose fill_area and add a property for rotation
2019-08-21 23:48:21 -07:00
Dave Astels
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
Dan Halbert
6e3a6d0ac5
typo in IncrementalEncoder.c
2019-08-20 16:23:17 -04:00
Dan Halbert
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
Dan Halbert
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
Dan Halbert
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
Scott Shawcroft
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano
...
Add PyPortal Titano
2019-08-12 16:01:10 -07:00
Jeff Epler
d9ee2d28a0
atmel-samd: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
brentru
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
brentru
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
Chris Osterwood
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
Jeff Epler
33b949abfa
samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines
...
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background(). This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
2019-08-07 21:29:24 -05:00
Jeff Epler
500d1bb168
samd: audio_dma.c: Remove exceptions, just return early
...
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
2019-08-07 20:20:36 -05:00
brentru
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
brentru
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
Jeff Epler
39c64bf83c
samd: audio_dma_stop: don't free invalid channel
...
audio_dma_stop can be reached twice in normal usage of AudioOut.
This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number. This also prevents
the event channel from being disabled twice.
The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
2019-08-06 22:00:31 -05:00
Jeff Epler
8b717955ba
samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking
...
It turns out the "disable" error will fire in practice, we'll fix that
next.
2019-08-06 22:00:31 -05:00
Jeff Epler
6253f11503
samd: audio_dma_stop: Clear out audio_dma_state[]
...
As identified in #1908 , when both AudioOut and PDMIn are used, hard
locks can occur. Because audio_dma_stop didn't clear audio_dma_state[],
a future call to audio_dma_load_next_block could occur using a DMA
object which belongs to PDMIn.
I believe that this Closes : #1908 though perhaps it is still not the full
story.
Testing performed: Loaded a sketch similar to the one on #1908 that
tends to reproduce the bug within ~30s. Ran for >300s without hard
lock. HOWEVER, while my cpx is no longer hard locking, it occasionally
(<1 / 200s) announces
Code done running. Waiting for reload.
(and does so), even though my main loop is surrounded by a 'while True:'
condition, so there are still gremlins nearby.
2019-08-06 21:34:21 -05:00
Scott Shawcroft
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
Scott Shawcroft
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
Scott Shawcroft
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
wallarug
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
wallarug
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
Keith Packard
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
Keith Packard
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
Keith Packard
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
Keith Packard
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
Keith Packard
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
wallarug
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
wallarug
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
wallarug
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
wallarug
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
wallarug
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
sommersoft
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
wallarug
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
wallarug
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
wallarug
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
wallarug
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
wallarug
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
wallarug
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
wallarug
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
Scott Shawcroft
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
Scott Shawcroft
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
Scott Shawcroft
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
Jeff Epler
6b44e40ee8
audiocore: Factor from audioio
...
When nrf pwm audio is introduced, it will be called `audiopwmio`. To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.
INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
2019-07-25 06:44:26 -05:00
Dan Halbert
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
Scott Shawcroft
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1
...
Update Arch Linux ARM compiler installation instructions
2019-07-22 19:29:53 -07:00
Scott Shawcroft
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
Scott Shawcroft
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
Scott Shawcroft
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.
2019-07-19 16:10:32 -07:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
Kattni Rembor
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
Kattni Rembor
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
Scott Shawcroft
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
Scott Shawcroft
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
Carl Elkins
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
jandjstudios
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
iot49
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
Anthony DiGirolamo
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
Chris Osterwood
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
Chris Osterwood
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
Radomir Dopieralski
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
Scott Shawcroft
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
Scott Shawcroft
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
Scott Shawcroft
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
Scott Shawcroft
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
Scott Shawcroft
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
Radomir Dopieralski
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
Scott Shawcroft
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
brentru
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
brentru
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
brentru
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
brentru
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
Scott Shawcroft
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
Scott Shawcroft
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
Scott Shawcroft
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
Dan Halbert
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
Dan Halbert
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
Dan Halbert
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
Dan Halbert
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
shazz
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
Dan Halbert
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
Dan Halbert
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
Dan Halbert
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
Scott Shawcroft
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
Dan Halbert
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
Dan Halbert
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
Scott Shawcroft
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
Chris Osterwood
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
Chris Osterwood
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
sabas1080
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
Scott Shawcroft
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
sabas1080
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
Scott Shawcroft
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
Scott Shawcroft
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
sabas1080
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
Scott Shawcroft
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
sabas1080
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
Dan Halbert
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ladyada
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
ladyada
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
wallarug
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
wallarug
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
wallarug
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
ladyada
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
ladyada
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
Scott Shawcroft
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
Dan Halbert
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
Scott Shawcroft
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
Carlos
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
Carlos
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
Carlos
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
Carlos
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
Dan Halbert
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
Scott Shawcroft
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
Scott Shawcroft
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
Scott Shawcroft
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
Scott Shawcroft
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
ITACA Innovation S.R.L
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
Scott Shawcroft
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
Scott Shawcroft
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
Radomir Dopieralski
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
siddacious
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
Radomir Dopieralski
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
Dan Halbert
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
Scott Shawcroft
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
Scott Shawcroft
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
Scott Shawcroft
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
Scott Shawcroft
7161038d6b
Turn off displayio because it is a satellite
2019-04-12 11:54:32 -07:00
Radomir Dopieralski
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
Radomir Dopieralski
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
Max Holliday
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
Max Holliday
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
Radomir Dopieralski
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
Radomir Dopieralski
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
Radomir Dopieralski
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
Scott Shawcroft
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
ladyada
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
Dan Halbert
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
Scott Shawcroft
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
Dan Halbert
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
Scott Shawcroft
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
Dan Halbert
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
Dan Halbert
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
Dan Halbert
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
Scott Shawcroft
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
Scott Shawcroft
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
Scott Shawcroft
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
Scott Shawcroft
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
Radomir Dopieralski
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
Scott Shawcroft
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
Melissa LeBlanc-Williams
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
Melissa LeBlanc-Williams
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
Dan Halbert
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
Melissa LeBlanc-Williams
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
Dan Halbert
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
Dan Halbert
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
Dan Halbert
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
Dan Halbert
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
Dan Halbert
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
Scott Shawcroft
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
Sabas
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
Dan Halbert
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
Dan Halbert
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
ladyada
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
ladyada
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
sabas1080
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
Melissa LeBlanc-Williams
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
Dan Halbert
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
Dan Halbert
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
Dan Halbert
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
Melissa LeBlanc-Williams
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
Melissa LeBlanc-Williams
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
Melissa LeBlanc-Williams
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
Melissa LeBlanc-Williams
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
Scott Shawcroft
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
ITACA Innovation S.R.L
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
ITACA Innovation S.R.L
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
ITACA Innovation S.R.L
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
ITACA Innovation S.R.L
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
ITACA Innovation S.R.L
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
ITACA Innovation S.R.L
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
Melissa LeBlanc-Williams
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
Justin R. Cutler
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
Justin R. Cutler
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
Melissa LeBlanc-Williams
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
Melissa LeBlanc-Williams
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
Dan Halbert
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
Dan Halbert
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
Dan Halbert
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
Radomir Dopieralski
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
Scott Shawcroft
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
Scott Shawcroft
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
Dan Halbert
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
Dan Halbert
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
Scott Shawcroft
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
Scott Shawcroft
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
Scott Shawcroft
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
Scott Shawcroft
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
John Reese
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
Scott Shawcroft
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
caternuson
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
caternuson
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
Radomir Dopieralski
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
Dan Halbert
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
sommersoft
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
sommersoft
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
sommersoft
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
sommersoft
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
sommersoft
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
sommersoft
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
Dan Halbert
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
Radomir Dopieralski
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
Dan Halbert
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
Radomir Dopieralski
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
Radomir Dopieralski
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
Radomir Dopieralski
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
Radomir Dopieralski
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
Radomir Dopieralski
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
Radomir Dopieralski
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
Dan Halbert
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
Radomir Dopieralski
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
Dan Halbert
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
Dan Halbert
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
Radomir Dopieralski
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
Radomir Dopieralski
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
Radomir Dopieralski
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
Radomir Dopieralski
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
Radomir Dopieralski
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
Radomir Dopieralski
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
Radomir Dopieralski
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
sommersoft
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
sommersoft
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
sommersoft
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
sommersoft
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
sommersoft
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
Bryan Siepert
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
Bryan Siepert
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
Bryan Siepert
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
ladyada
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
sommersoft
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
sommersoft
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
Scott Shawcroft
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
sommersoft
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
sommersoft
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
Kattni
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
Dan Halbert
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
sommersoft
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
Dan Halbert
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
Scott Shawcroft
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
Scott Shawcroft
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
Dan Halbert
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
Dan Halbert
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
TG-Techie
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
Dan Halbert
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
Dan Halbert
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
sommersoft
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
sommersoft
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
Dan Halbert
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
Dan Halbert
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
Dan Halbert
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
Dan Halbert
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
Dan Halbert
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
Scott Shawcroft
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
Scott Shawcroft
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
Dan Halbert
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
TG-Techie
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
Scott Shawcroft
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
Scott Shawcroft
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
Scott Shawcroft
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
Scott Shawcroft
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
Max Holliday
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
Max Holliday
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
Max Holliday
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
Max Holliday
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
Scott Shawcroft
844c20106b
Turn off micropython.mem_info on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
Scott Shawcroft
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
Scott Shawcroft
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
Scott Shawcroft
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
Scott Shawcroft
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
Scott Shawcroft
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
Scott Shawcroft
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
Scott Shawcroft
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
Scott Shawcroft
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
Scott Shawcroft
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
Scott Shawcroft
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
Scott Shawcroft
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
Elias Santistevan
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
Elias Santistevan
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
Scott Shawcroft
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
Scott Shawcroft
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
ShawnHymel
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
TG-Techie
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
ShawnHymel
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
TG-Techie
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
ShawnHymel
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
ShawnHymel
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
Scott Shawcroft
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
Scott Shawcroft
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
Scott Shawcroft
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
Scott Shawcroft
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
Roy Hooper
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
Scott Shawcroft
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
Scott Shawcroft
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
Scott Shawcroft
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
Scott Shawcroft
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
Scott Shawcroft
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
Scott Shawcroft
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
Scott Shawcroft
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
Scott Shawcroft
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
Scott Shawcroft
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
Scott Shawcroft
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
ladyada
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
Scott Shawcroft
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
Scott Shawcroft
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
TG-Techie
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
Roy Hooper
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
TG-Techie
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
TG-Techie
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
Dan Halbert
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
Dan Halbert
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
Scott Shawcroft
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
Scott Shawcroft
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
Dan Halbert
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
Scott Shawcroft
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
Dan Halbert
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
Shawn Hymel
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
ShawnHymel
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
Scott Shawcroft
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
Dan Halbert
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
ShawnHymel
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
Scott Shawcroft
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
ShawnHymel
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
ShawnHymel
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
ShawnHymel
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
ShawnHymel
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
Dan Halbert
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
Limor "Ladyada" Fried
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
Scott Shawcroft
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
Scott Shawcroft
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
ShawnHymel
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
ShawnHymel
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
Scott Shawcroft
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
Scott Shawcroft
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
Scott Shawcroft
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
Scott Shawcroft
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
Scott Shawcroft
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
Scott Shawcroft
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
Dan Halbert
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
Dan Halbert
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
Dan Halbert
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
ShawnHymel
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
Scott Shawcroft
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
Scott Shawcroft
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
Scott Shawcroft
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
Scott Shawcroft
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
Scott Shawcroft
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
Scott Shawcroft
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
Scott Shawcroft
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
Scott Shawcroft
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
sabas1080
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
Scott Shawcroft
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
Jeff Epler
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
Benjamin Shockley
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
Scott Shawcroft
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
Benjamin Shockley
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
Benjamin Shockley
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
Dan Halbert
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
Scott Shawcroft
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
Noralf Trønnes
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
Dan Halbert
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
Scott Shawcroft
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
Scott Shawcroft
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
Scott Shawcroft
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
Scott Shawcroft
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
Scott Shawcroft
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
Scott Shawcroft
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
Scott Shawcroft
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
Scott Shawcroft
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
Scott Shawcroft
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
Dan Halbert
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
ATMakersBill
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
ATMakersBill
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
Dan Halbert
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
Bryan Siepert
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
Bryan Siepert
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
Dan Halbert
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
Benjamin Shockley
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
Nick Moore
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
Nick Moore
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
Scott Shawcroft
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
Noralf Trønnes
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
Noralf Trønnes
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
Noralf Trønnes
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
sabas1080
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
Benjamin Shockley
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
Benjamin Shockley
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
Benjamin Shockley
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
Benjamin Shockley
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
Benjamin Shockley
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
Scott Shawcroft
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
Dan Halbert
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
Scott Shawcroft
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
Scott Shawcroft
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
Paul Sajna
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
Nick Moore
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
sabas1080
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
Paul Sajna
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
Paul Sajna
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
Nick Moore
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
Nick Moore
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
Scott Shawcroft
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
Scott Shawcroft
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
ATMakersBill
9f94712ad1
replacing change to input() with separate method to check for USB Serial input
2018-10-09 18:37:52 -04:00
Nick Moore
a60700b1c5
Get DHCP working ...
2018-10-09 16:28:30 +11:00
Nick Moore
6e624b9c6a
Split wiznet.WIZNET5K off into its own file
2018-10-09 13:05:58 +11:00
Scott Shawcroft
2b0356c61f
Disable framebuf by default on express builds.
2018-10-05 15:19:09 -07:00
Scott Shawcroft
76008ce304
Introduce audioio.Mixer which can mix multiple audio samples
...
to produce a single sample.
Only works with 16 bit samples on the M4.
Fixes #987
2018-10-05 15:12:23 -07:00
Benjamin Shockley
091c5106ef
Cleanup Files
2018-10-04 21:26:28 -05:00
Benjamin Shockley
62d316bffb
W25Q16JV IQ and IM
...
Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.
2018-10-04 21:26:05 -05:00
Benjamin Shockley
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
Benjamin Shockley
f6b9f101dc
Added W25Q16JV_IM
...
Added new flash module: W25Q16JV_IM
2018-10-04 21:13:05 -05:00
Nick Moore
15b59bee1b
change initialization method + mod_network names
2018-10-04 22:31:47 +10:00
Nick Moore
f9bda0ff93
Makefile & mpconfigport for atmel-samd with wiznet
2018-10-04 22:02:25 +10:00
Scott Shawcroft
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
Benjamin Shockley
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
Benjamin Shockley
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
Benjamin Shockley
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
Benjamin Shockley
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
Benjamin Shockley
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
Benjamin Shockley
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
Scott Shawcroft
a9d094ab74
Fix translations
2018-09-21 12:24:04 -04:00
Scott Shawcroft
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x
2018-09-21 12:22:26 -04:00
Scott Shawcroft
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
Dan Halbert
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
Scott Shawcroft
655f223916
Clock the SAMD21 much faster so it can actually convert at its max
...
sample rate of 350ksps.
Also added an error check of sample rate.
Fixes #1196
2018-09-18 15:29:46 -07:00
Dan Halbert
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
Dan Halbert
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
Pierrick C
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
ladyada
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
ladyada
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
ladyada
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
ladyada
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
Pierrick C
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
Scott Shawcroft
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements
...
UART enhancements
2018-09-12 16:23:28 -07:00
Scott Shawcroft
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk.
...
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.
Fixes #1182
2018-09-12 15:25:59 -07:00
Dan Halbert
6a046f55c4
UART fixes and enhancements; default board object fix
2018-09-12 17:19:43 -04:00
Dan Halbert
2bd7040fe0
usb_write() output_len was uint8_t instead of uint32_t
2018-09-12 17:16:52 -04:00
Paul Kierstead
02b3f62460
When UART timeout of zero is given, make read() return data already available
2018-09-12 13:25:49 -04:00
Benjamin Shockley
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
Dan Halbert
c3918bae57
PWMOut was not claming channels on shared TCCs
2018-09-11 19:46:47 -04:00
Benjamin Shockley
2138b04e45
Update to IS25LP016D
...
Changed .supports_qspi_write to true.
2018-09-11 07:52:23 -05:00
Benjamin Shockley
c7cf38186d
Added IS25LP016D
2018-09-10 14:55:18 -05:00
Benjamin Shockley
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
Benjamin Shockley
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
Benjamin Shockley
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
Dan Halbert
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
Scott Shawcroft
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
Scott Shawcroft
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
Scott Shawcroft
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
Scott Shawcroft
1683eb913d
Minor tweaks based on feedback
2018-09-06 14:49:49 -07:00
Dan Halbert
4c3b4cacfa
Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming
2018-09-05 13:15:22 -04:00
Paul Kierstead
2d3f1a10bf
When UART timeout of zero is given, make read() return data already available
2018-09-01 17:07:30 +00:00
Dan Halbert
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
Dan Halbert
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
Scott Shawcroft
121903b6ee
Tweaks based on feedback
2018-08-31 14:21:48 -07:00
Scott Shawcroft
6697544cdf
Introduce displayio to render graphics to displays.
...
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.
This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
2018-08-31 12:31:52 -07:00
Noralf Trønnes
b61cf8d81f
samd: Use RTC to set file timestamp
...
Use RTC to set file timestamp for file operations done on the board.
2018-08-25 20:43:09 +02:00
Jerry Needell
e8b94d0024
adjust SAMD51 neopixel_write timing
2018-08-24 07:01:50 -04:00
Scott Shawcroft
182a8d7120
Merge pull request #1131 from tannewt/hallowing3
...
Support Hallowing in 3.x
2018-08-20 18:26:07 -07:00
Scott Shawcroft
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff.
2018-08-20 18:04:35 -07:00
Scott Shawcroft
44de3d49a8
Speed up zero neopixel pulses.
...
SK6812 on 5v is pickier than WS2812 on 5v.
Hopefully fixes #1083 .
2018-08-20 17:04:46 -07:00
ladyada
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-20 10:52:33 -07:00
Dan Halbert
1768057e87
add HalloWing
2018-08-20 10:52:24 -07:00
Noralf Trønnes
eefb6842a0
i2cslave: Fix missing translate() when raising exceptions
...
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
2018-08-18 16:00:06 +02:00
Scott Shawcroft
4a4d84ba42
Merge pull request #1064 from notro/i2cslave
...
Add busio.I2CSlave
2018-08-17 16:51:45 -07:00
Scott Shawcroft
e8cf6a9072
Update to merged peripheral change.
2018-08-16 18:05:53 -07:00
Scott Shawcroft
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
Scott Shawcroft
de5a9d72dc
Compress all translated strings with Huffman coding.
...
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.
Builds without LTO work as well but include both untranslated
strings and compressed strings.
This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531 .
2018-08-16 17:40:57 -07:00
Noralf Trønnes
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
Noralf Trønnes
b6822b86ac
busio/I2C: Split out samd_i2c_get_sercom()
...
It will be shared with I2CSlave.
2018-08-16 17:06:40 +02:00
ladyada
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
Dan Halbert
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings
...
Fixes and translate more strings.
2018-08-09 20:00:18 -04:00
Scott Shawcroft
24e53ad591
Rework escaping and fix ESP build.
2018-08-09 15:58:45 -07:00
Scott Shawcroft
86d2154d71
Change file mode back.
2018-08-09 09:14:14 -07:00
Scott Shawcroft
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
Jeff Epler
b0e33f6a11
atmel-samd: UART: allocate rx buffer in long-lived region
...
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.
However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
2018-08-08 19:21:57 -05:00
Dan Halbert
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel
...
Retune neopixel timings on SAMD51. They were too slow.
2018-08-07 21:33:12 -04:00
Scott Shawcroft
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow.
...
Fixes #1083
2018-08-07 16:58:37 -07:00
Scott Shawcroft
933add6cd8
Support internationalisation.
2018-08-07 14:58:57 -07:00
Dan Halbert
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
Dan Halbert
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
Scott Shawcroft
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
Scott Shawcroft
64e5691fe7
Update to peripherals merge.
2018-08-02 13:59:12 -07:00
Scott Shawcroft
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
Scott Shawcroft
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity.
2018-08-02 11:07:22 -07:00
Scott Shawcroft
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing.
2018-08-02 00:51:52 -07:00
hathach
533d8dda96
fix samd usb hid typo
2018-08-01 08:40:04 +07:00
Scott Shawcroft
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-)
2018-07-31 12:42:21 -07:00
Scott Shawcroft
b334289669
Reenable LTO for debug.
2018-07-31 05:18:23 -07:00
Scott Shawcroft
12cf5e51c2
Allow for resizing the stack area.
2018-07-31 05:18:23 -07:00
Scott Shawcroft
777542c716
Add basic memory allocation outside Python runtime
...
This allows for the heap to fill all space but the stack. It also
allows us to designate space for memory outside the runtime for
things such as USB descriptors, flash cache and main filename.
Fixes #754
2018-07-31 05:18:03 -07:00
Scott Shawcroft
a6d94b6845
Merge pull request #1068 from dhalbert/micropython-25ae98f-merge
...
Micropython 25ae98f
2018-07-30 12:33:44 -07:00
Dan Halbert
fbe98ff9a9
Merge pull request #1071 from dhalbert/3.x-hallowing
...
add HalloWing
2018-07-29 20:24:47 -04:00
Dan Halbert
680597547c
add HalloWing
2018-07-29 19:22:16 -04:00
Dan Halbert
f48b70050e
merge finished
2018-07-28 13:29:47 -04:00
Dan Halbert
2809b4f9dd
Merge branch 'master' into micropython-25ae98f-merge
2018-07-16 19:36:40 -04:00
Dan Halbert
a20ab40ed2
Merge 3.0.0 final bugfixes and changes to master
2018-07-16 09:01:46 -04:00
Dan Halbert
e2e01efa84
compiles and runs; hangs on import storage;storage.VfsFat.<tab>
2018-07-13 22:51:10 -04:00
Dan Halbert
8bb363f7c4
must set pull after setting direction with gpio_set_pin routines
2018-07-09 17:18:06 -04:00
Scott Shawcroft
54179a0189
Use .s in samd Makefile too.
2018-07-05 04:44:00 -07:00
mrmcwethy
d9723bb613
include RTC fix for SAMd51 in circuitpython build
2018-07-03 06:52:05 -07:00
Scott Shawcroft
074c5ea144
Merge pull request #977 from dhalbert/update_crickit_libs-2
...
update crickit-related libs
2018-07-03 12:04:05 -07:00
Dan Halbert
bf9981e8db
bring all frozen libraries up to date
2018-07-03 14:39:21 -04:00
Scott Shawcroft
ec78d3cefd
Mark pointers in cpu registers as in use.
...
This prevents bugs where gc_collect is called from C code that did
a recent allocation.
2018-07-03 05:45:50 -07:00
Scott Shawcroft
bf00cde37d
Comment tweak after board change
2018-07-02 14:51:06 -07:00
Dan Halbert
2a0b857643
implement mp_hal_delay_us() to not need interrupts, and use it
2018-06-29 16:01:46 -04:00
mrmcwethy
df4469f92b
Test the BOARD parameter for nullness; display a error if nothing provided
2018-06-29 12:22:31 -07:00
mrmcwethy
d392f01f2c
include RTC fix for SAMd51 in circuitpython build
2018-06-29 05:45:38 -07:00
Dan Halbert
b4fd77bb7c
fix nrf and esp8266 builds for OneWire fix
2018-06-29 00:00:05 -04:00
Dan Halbert
52a11547cb
fix OneWire timing and DigitalInOut.switch_to_input()
2018-06-28 23:32:20 -04:00
Dan Halbert
1f3de5174e
Freeze Adafruit_CircuitPython_Crickit into crickit builds
2018-06-26 19:49:55 -04:00
jerryneedell
de4cd1ee73
add pins D3/D4 to pins.c
...
fixes #948
2018-06-20 22:26:59 -04:00
jerryneedell
80d16cb7df
add pins D3/D4 to pins.c
...
fixes #948
2018-06-19 22:34:29 -04:00
Scott Shawcroft
a5e03b76a6
Split out the peripherals library in preparation of sharing with MakeCode.
2018-06-15 16:16:21 -07:00
Dan Halbert
fa814a32ce
Make Trinket M0 build fit; make RAMFS in vfs_fat_* tests be compliant with expected API
2018-06-14 21:02:12 -04:00
Dan Halbert
e724bc1c4e
Fix playing audio from SD card
2018-06-14 18:47:40 -04:00
Scott Shawcroft
ee817a2fa8
Correct UART reads to return error on timeout.
...
This causes read to correctly return None instead of b''.
Fixes #874
2018-06-12 14:03:27 -07:00
Dan Halbert
4691b30c02
PDMIn: turn serializer on when starting DMA
2018-06-12 12:35:51 -04:00
Scott Shawcroft
73dadb0669
Update to the latest ASF4 which includes an I2C timeout extension while waiting for clock stretching.
...
Fixes #778
2018-06-11 18:37:48 -07:00
Dan Halbert
b2d98edb4e
Merge pull request #901 from tannewt/pulseio_too_fast
...
Prevent freezing USB during high frequency PulseIn.
2018-06-08 17:59:06 -04:00
Scott Shawcroft
8fb34a5846
Use bool not int.
2018-06-08 14:57:20 -07:00
Scott Shawcroft
66b79723b6
Add code size analysis tool and shrink samd.clock a smidge.
2018-06-08 12:56:32 -07:00
Scott Shawcroft
769788d3c7
Turn off USB pin objects since they are always used for USB.
2018-06-08 12:56:32 -07:00
Scott Shawcroft
383bf9a59e
Wait for the DFLL to be stable.
2018-06-08 12:56:32 -07:00
Scott Shawcroft
07a8899c72
Support M4
2018-06-08 12:56:32 -07:00
Scott Shawcroft
2fbab8067a
Prevent freezing USB during high frequency PulseIn.
...
We now track the last time the background task ran and bail on the
PulseIn if it starves the background work. In practice, this
happens after the numbers from pulsein are no longer accurate.
This also adjusts interrupt priorities so most are the lowest level
except for the tick and USB interrupts.
Fixes #516 and #876
2018-06-08 12:56:32 -07:00
Dan Halbert
218930d18b
Check for PDMIn DMA getting stuck.
2018-06-08 08:23:52 -04:00
Kattni Rembor
ba7e0e2f86
Add Adafruit to other M4 board name strings
2018-06-07 13:39:04 -04:00
Kattni Rembor
7b2875d54a
Add Adafruit to board name string
2018-06-07 13:33:13 -04:00
Kattni Rembor
0ab2a60dcd
Update ItsyBitsy board name to one word
2018-06-07 13:12:44 -04:00
Dan Halbert
9ba6990228
Feather M0 Express build with Crickit libraries
2018-06-05 18:21:47 -04:00
Dan Halbert
74ced174ce
Merge pull request #898 from dhalbert/feather_m4_d4
...
add PA14 as D4 to Feather M4 Express
2018-06-05 11:41:31 -04:00
Dan Halbert
7e7e33e460
add PA14 as D4 to Feather M4 Exprses
2018-06-05 08:15:34 -04:00
Scott Shawcroft
0c7c0821fc
Merge pull request #891 from godlygeek/low_flash_errno_fixes
...
Human readable OSError messages for low flash devices
2018-06-04 17:22:57 -07:00
Scott Shawcroft
e580d22f4a
Use the external crystal on SAMD21 again.
...
Also, re-enable calibration storage for CircuitPlayground Express.
Tested with a 500hz PWMOut on Metro M0 with Saleae:
* with crystal 500hz
* with usb 500hz +- 0.1hz
* without either 487hz += 0.1hz
SAMD51 is skipped due to DFLL errata and the fact it defaults to a
factory calibrated 48mhz that works fine for USB.
Fixes #648
2018-06-01 18:01:42 -07:00
Matt Wozniski
22f4438787
Prune atmel-samd errno list
...
Remove errnos that are only raised by modules that aren't linked into
the atmel-samd port.
2018-06-01 19:04:14 -04:00
Matt Wozniski
e798b67ca2
Begin a custom list of errnos for atmel-samd
...
The uerrno module was written to allow boards to customize the list of
errnos they can raise. Start by copying the default list.
2018-06-01 19:04:04 -04:00
Scott Shawcroft
717199018b
Adapt for feedback and hack around pIRkey size constraint.
2018-06-01 15:08:52 -07:00
Dan Halbert
f386144428
redo state algorithm
2018-06-01 15:08:52 -07:00
Scott Shawcroft
9920f0a5de
atmel-samd: Make ticks more atomic.
...
Always use current_tick when sub millisecond precision is required.
Otherwise getting the ms/us to correspond is tricky.
2018-06-01 15:08:52 -07:00
Scott Shawcroft
d0fb6e7a2f
atmel-samd: Add rotary encoder support.
...
Fixes #283
2018-06-01 15:08:48 -07:00
Scott Shawcroft
fd71e56891
atmel-samd: Re-org helper peripheral files into their own subdirectory.
...
Ideally in the future they won't depend on ASF4 or MicroPython.
2018-06-01 15:07:31 -07:00
Dan Halbert
ae31c4ac18
Merge pull request #889 from tannewt/audioio_timers_in_use
...
Turn off timer on AudioOut deinit.
2018-06-01 18:03:29 -04:00
Dan Halbert
ea95eb730a
Merge pull request #890 from tannewt/brownout3
...
Support brownout to safe mode. Fixes #870
2018-06-01 18:02:13 -04:00
Scott Shawcroft
f38ce1060c
Support brownout to safe mode. Fixes #870
2018-06-01 13:45:28 -07:00
Scott Shawcroft
bf1f0b3d11
Turn off timer on AudioOut deinit.
...
Thanks to @sommersoft for spotting the error.
Fixes #850
2018-06-01 13:32:45 -07:00
Noralf Trønnes
e158702a68
atmel-samd/samd51: Use crystal for RTC
...
This uses the crystal to clock the RTC on boards which have a crystal.
Disable clock generator 2 which was enabled in commit
8e2080411f
2018-06-01 18:03:23 +02:00
Noralf Trønnes
ab7ddfddd5
atmel-samd/samd51: Refactor clock setup
...
Refactor the convoluted asf4 clock setup into something more readable.
enable_clock_generator() has 2 changes:
- Set 'Output enabled' to match the current clock setup
- Handle divisors above 511
Add an enable_clock_generator_sync() version which makes it possible to setup
clocks without waiting for syncing. The bootup would hang without this.
I have checked these registers:
NVMCTRL->CTRLA = 0x00000004
Peripheral clocks (only non-zero shown):
PCHCTRL[1]=0x00000045
PCHCTRL[10]=0x00000041
Generator clocks (only non-zero shown):
GENCTRL[0] = 0x00010907
GENCTRL[1] = 0x00010906
-GENCTRL[2] = 0x00041104
+GENCTRL[2] = 0x00200904
GENCTRL[4] = 0x00010907
GENCTRL[5] = 0x00180906
DFLL clock:
OSCCTRL->DFLLCTRLA = 0x00000082
OSCCTRL->DFLLCTRLB = 0x00000000
OSCCTRL->DFLLVAL = 0x00008082
OSCCTRL->DFLLMUL = 0x00000000
DPLL clocks:
OSCCTRL->Dpll[0].DPLLCTRLA=0x00000002
OSCCTRL->Dpll[0].DPLLCTRLB=0x00000000
OSCCTRL->Dpll[0].DPLLRATIO=0x0000003b
OSCCTRL->Dpll[1].DPLLCTRLA=0x00000080
OSCCTRL->Dpll[1].DPLLCTRLB=0x00000020
OSCCTRL->Dpll[1].DPLLRATIO=0x00000000
OSC32KCTRL clock:
OSC32KCTRL->RTCCTRL = 0x00000000
OSC32KCTRL->XOSC32K = 0x00002082
OSC32KCTRL->CFDCTRL = 0x00000000
OSC32KCTRL->EVCTRL = 0x00000000
OSC32KCTRL->OSCULP32K = 0x00002300
Only gen2 changed which is due to samd51 having more bits in the simple
division register so DIVSEL wasn't necessary, and it didn't have OE set.
2018-06-01 18:02:35 +02:00
Noralf Trønnes
5c6aea9fd8
atmel-samd/samd51: Implement samd.clock
...
Fill out the dummy implementation.
2018-06-01 18:01:08 +02:00
Radomir Dopieralski
b219ce6d37
Add gamepad_singleton to root pointers
2018-05-30 23:11:22 +02:00
Dan Halbert
eab8e43188
rev E feather M4 express; remove named AREF pins
2018-05-29 20:25:28 -04:00
Dan Halbert
754c36bb37
Merge pull request #867 from dhalbert/fix_pirkey_apa102
...
3.0 pirkey build including appropriate frozen modules
2018-05-24 22:07:14 -04:00
Dan Halbert
ee896cdd41
restore I2C and UART. Don't do port.c resets and inits for modules that are not available.
2018-05-24 20:20:18 -04:00
Scott Shawcroft
42bf3a1306
Remove asf3 nvm code.
2018-05-24 13:14:40 -07:00
Dan Halbert
b9f36184f5
refine pirkey build
2018-05-24 13:28:03 -04:00
Dan Halbert
083f91363a
pirkey APA102 defs were commented out in mpconfigboard.h
2018-05-23 18:21:07 -04:00
Scott Shawcroft
aa86a1457f
Use merged in FreeTouch
2018-05-23 11:57:35 -07:00
Dan Halbert
6af5fc2796
Merge pull request #861 from tannewt/touchio3
...
Turn on touchio for M0 boards.
2018-05-23 14:20:15 -04:00
Scott Shawcroft
641caaa6dd
Gain space back in non-Express builds by using -finline-limit
2018-05-23 10:36:59 -07:00
Scott Shawcroft
3607d3ba2c
Correctly reset the PTC
2018-05-22 14:20:35 -07:00
Scott Shawcroft
31bcd1c45c
Fixup gclk init
2018-05-22 13:56:12 -07:00
Scott Shawcroft
99123a8621
Turn on touchio for M0 boards. M4 will come later once its supported
...
by FreeTouch.
Fixes #670
2018-05-22 13:49:08 -07:00
Dan Halbert
22405d6bdb
Merge pull request #860 from dhalbert/3.0-cpx-crickit
...
turn off longint on cpx crickit; update frozen libs
2018-05-22 16:28:42 -04:00
Scott Shawcroft
165b28438a
Merge pull request #854 from python-ugame/extra-override
...
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
2018-05-22 10:22:35 -07:00
Dan Halbert
0d7db29630
turn off longint on cpx crickit; update frozen libs
2018-05-22 13:03:13 -04:00
Dan Halbert
49a81d5c4b
LONGLONG typo
2018-05-22 09:35:29 -04:00
Dan Halbert
45db48bbaa
make longint choice mechanism more readable
2018-05-22 08:04:14 -04:00
Dan Halbert
5680933483
refactor longint settings; make crickit cpx build
2018-05-21 23:58:03 -04:00
Radomir Dopieralski
6a6ab2b0ec
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
...
Some boards (like the uGame10) may want to have their own set of extra
modules. This change lets them override EXTRA_BUILTIN_MODULES in their
mpconfigboard.h and makes the ugame10 board do that.
2018-05-21 09:23:58 +02:00
Noralf Trønnes
cf33ad9a54
atmel-samd/samd21: Enable long int on Express boards
...
This is necessary for using 1970 epoch in the time module.
2018-05-18 12:35:26 +02:00
Matt Land
06b293af29
pirkey, trinket, ugame
2018-05-17 13:56:10 -04:00
Matt Land
a84845c0ae
itsbitsy, metro
2018-05-17 13:48:33 -04:00
Matt Land
173a0a5faa
arduino, circuitplayground, feather boards
2018-05-17 13:42:08 -04:00
Matt Land
fc2b4526d3
worked
2018-05-17 13:33:26 -04:00
Matt Land
e1cccd3dac
rename to UART
2018-05-17 13:21:15 -04:00
Matt Land
2210fc60b1
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-default-serial
2018-05-17 13:08:43 -04:00
Matt Land
c846f4bdae
remove newline
2018-05-17 12:17:06 -04:00
Matt Land
4fd4adf974
not working
2018-05-17 12:14:51 -04:00
Matt Land
30c625ff46
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 17:58:03 -04:00
Matt Land
0511becd55
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-i2c-gemma
2018-05-16 17:55:43 -04:00
Scott Shawcroft
6a8db03ade
Merge pull request #838 from rhooper/master
...
add supervisor.reload() to soft reboot from code
2018-05-16 17:52:16 -04:00
Matt Land
b9b742cc69
add spi def to all boards pins file
2018-05-16 17:43:14 -04:00
Matt Land
c2fa892a02
fix formatting
2018-05-16 17:38:44 -04:00
Matt Land
cc52f8efd9
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 17:32:50 -04:00
Matt Land
0a185c4d2d
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-i2c-gemma
2018-05-16 17:07:58 -04:00
Matt Land
e8e75c056a
For the two boards without SCL and SDA can you still add the board global entry for I2C? That way they'll raise the NotImplementedError with the better message instead of a NameError.
2018-05-16 17:02:41 -04:00
Matt Land
de885e81b1
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 16:07:55 -04:00
Matt Land
8a351595ef
formatting, trailing newlines
2018-05-16 15:57:25 -04:00
Matt Land
2c067edf54
used pins.c instead of README.rst
2018-05-16 15:54:01 -04:00
Matt Land
3144654854
SPI for all boards
2018-05-16 15:36:36 -04:00
Matt Land
244866c2c3
spi on much
2018-05-16 15:25:24 -04:00
Matt Land
10888be8e8
fixed pins
2018-05-16 15:07:12 -04:00
Matt Land
8d1d821876
pin issue
2018-05-16 14:58:57 -04:00
Scott Shawcroft
99e34e38eb
Merge pull request #829 from jerryneedell/jerryn_i2c
...
add keyword timeout to I2C -- only used for bitbangioi
2018-05-16 14:52:11 -04:00
Matt Land
fbb57f902d
better error message
2018-05-15 15:37:48 -04:00
Matt Land
ff6e6b5155
best effort
2018-05-15 15:33:27 -04:00
Matt Land
4e65752d6e
feather m0 boards
2018-05-15 15:28:23 -04:00
Roy Hooper
90a09dba59
Merge branch 'master' of github.com:adafruit/circuitpython
2018-05-15 14:54:54 -04:00
Matt Land
cdeb7ddff8
fix non- builds
2018-05-15 14:27:05 -04:00
Matt Land
cd1f6627e4
formatting
2018-05-15 14:09:00 -04:00
Matt Land
bd7f603748
zero + feather logger
2018-05-15 14:06:01 -04:00
Roy Hooper
7d443c87b3
Add gemma_m0 pin exclusions
2018-05-15 14:03:39 -04:00
Matt Land
a10f04ad6e
support for 2
2018-05-15 13:53:53 -04:00
Matt Land
b0bacd9b0b
review code
2018-05-15 13:15:24 -04:00
Roy Hooper
3fd9900ea7
disable pins on trinket_m0 so that we can free a fair bit of flash - Issue #840
2018-05-15 13:13:59 -04:00
Dan Halbert
54293397c5
Merge pull request #837 from godlygeek/human_readable_oserror
...
Human readable OSError messages
2018-05-15 10:12:09 -04:00
Roy Hooper
698912633f
Rename reload_next_character to reload_requested to make it match it's intended use
2018-05-14 17:00:38 -04:00
Matt Wozniski
0518cc1d94
Include uerrno for boards with external SPI flash
...
Signed-off-by: Matt Wozniski <mwozniski@bloomberg.net>
2018-05-14 15:12:35 -04:00
Roy Hooper
a0954b9e11
Fix for Issue #770 - Provide a better error message when timers are still available.
2018-05-14 13:52:32 -04:00
Roy Hooper
1661cbb6e1
Make python detection more robust and allow setting PYTHON2 and PYTHON3 to override python executables during build.
2018-05-14 11:19:19 -04:00
Jerry Needell
d6c26942a5
add timeout keyword to I2C - for bitbangio - ignored for busio
2018-05-13 21:54:44 -04:00
Dan Halbert
240659da0e
PBxx pins were not setting DRVSTR or reporting PULL properly
2018-05-10 23:09:51 -04:00
Scott Shawcroft
50fc90bc5f
Add pause/resume control to AudioOut and I2SOut
...
Fixes #808
2018-05-08 11:53:13 -07:00
Scott Shawcroft
d3a5d40374
Merge pull request #785 from notro/rtc_calibration
...
atmel-samd/samd21: Rework clock setup + calibration
2018-05-08 10:55:51 -07:00
Dan Halbert
e82f37c60e
enable cache in SAMD51
2018-05-07 21:55:37 -04:00
Noralf Trønnes
5d5d14709f
Add clock representation with calibration
...
Add a python representation of the clocks with the possibility to change
the calbration of clock sources.
2018-05-07 23:04:02 +02:00
Noralf Trønnes
2893e795fc
atmel-samd/samd21: Use XOSC32K on boards with a crystal
...
Use XOSC32K on boards that have BOARD_HAS_CRYSTAL defined and set to 1.
2018-05-05 18:45:15 +02:00
Noralf Trønnes
4adba51569
atmel-samd/samd21: Rework clock setup
...
Make clock setup explicit instead of using the convoluted asf4 macro setup.
enable_clock_generator():
- Add GCLK_GENCTRL_OE to stick with the current setup.
- Handle divisor larger than 31 for generator 2
- Change the source argument so it can take the GCLK_GENCTRL_SRC_XXXX_Val
macros without casting to uint8_t.
This patch should not introduce any functional changes except keeping
GCLK_GENCTRL_OE enabled when the I2S clock is enabled.
2018-05-05 18:01:13 +02:00
Scott Shawcroft
d32349cee8
Merge pull request #804 from dhalbert/boot_out_fixes
...
3.0: Handle bad power on reset.
2018-05-04 10:06:35 -07:00
Dan Halbert
32363b801b
3.0: add CircuitPlayground and HID to CPX frozen modules
2018-05-04 08:44:33 -04:00
Noralf Trønnes
f21c2494cb
atmel-samd/samd21: Enable OSC32K
...
Enable OSC32K which is used by the RTC.
For some reason the RTC worked without enabling it.
2018-05-04 13:34:30 +02:00
Noralf Trønnes
4a2a553647
atmel-samd/clocks: Split out samd21_clocks.c and samd51_clocks.c
...
Enhance readability by separating the samd21 and samd51 clock code.
This patch should not introduce any functional changes.
2018-05-04 13:32:56 +02:00
Dan Halbert
f486ead84a
Handle bad power on reset.
2018-05-03 23:43:02 -04:00
Dan Halbert
9d484c4935
Merge pull request #789 from tannewt/pdmin3
...
Re-enable PDMIn without ASF
2018-05-02 19:59:20 -04:00
Scott Shawcroft
04f75b8903
Reduce the buffer size back to what 2.x has. Increase was leftover
...
from debugging.
2018-05-02 15:21:43 -07:00
Scott Shawcroft
22b7cd3d51
Fix 8 bit recordings on CPX.
...
The DMA trigger source was incorrect when using serializer 1 on
the SAMD21.
Playback register was incorrect for 8 bit as well. Now fixed.
2018-05-02 15:15:25 -07:00
Dan Halbert
33b9c39f58
peripherals.c should include peripherals.h
2018-05-02 13:50:34 -04:00
Dan Halbert
e565282da9
fix minor comment typos
2018-05-01 22:04:11 -04:00
Dan Halbert
3a2b4af830
Implement microcontroller.cpu.temperature on '21 and '51.
2018-05-01 21:35:55 -04:00
Noralf Trønnes
681399f8db
atmel-samd: RTC: Improve precision when setting datetime
...
The prescaler is not reset when setting the counter so we can be off by
as much as 1023/1024 seconds. Fix this by resetting the RTC module.
2018-05-01 21:35:24 -04:00
Scott Shawcroft
cfea51ec68
Re-enable PDMIn without ASF and using the helpers added with
...
I2SOut.
The API is almost the same except the frequency attribute has been
renamed to sample_rate so that its less likely to be confused with
frequencies within the audio itself.
Fixes #263 .
2018-05-01 14:35:43 -07:00
Noralf Trønnes
62d7a800d7
atmel-samd: RTC: Improve precision when setting datetime
...
The prescaler is not reset when setting the counter so we can be off by
as much as 1023/1024 seconds. Fix this by resetting the RTC module.
2018-04-29 20:43:07 +02:00
Dan Halbert
48f595ee13
convert wrapper class to just a module
2018-04-24 13:28:26 -04:00
Dan Halbert
9daa1a68d8
HID gamepad support
2018-04-23 23:51:23 -04:00
Scott Shawcroft
58ba74194e
Merge pull request #765 from jerryneedell/jerryn_tick
...
modify tick_delay to handle SysTick->VAL rollover
2018-04-20 15:40:00 -04:00
Jerry Needell
bef05ffbf1
cleanup in tick.c
2018-04-20 15:23:03 -04:00
Jerry Needell
fe738598da
modify tick.c to simplify - remove interupt disable from common_hal_pulseio_pulsein_resume
2018-04-20 11:59:33 -04:00
Jerry Needell
16bb40b110
modify tic.c to chec if interrupts are enabled, rename us_between_ticks to us until_next_tick
2018-04-19 22:25:48 -04:00
Jerry Needell
3399d541c3
Merge remote-tracking branch 'origin/master' into jerryn_tick
2018-04-19 20:54:47 -04:00
Scott Shawcroft
898a7d92e3
atmel-samd: Fix M4 RTC and ItsyBitsy M4 definition
2018-04-19 14:42:03 -04:00
sommersoft
a0eb51cc97
updated asf4_config: reverted oscillators to use internal vs external for RTC
2018-04-18 03:35:58 +00:00
Jerry Needell
e09d95067c
update tick.c (fix LOAD value) update PulseIn.c (do not enable interrupts for trigger_duration > 1000
2018-04-17 21:46:15 -04:00
Scott Shawcroft
81d395d825
Merge pull request #745 from notro/time_rtc
...
RFC: Add rtc module
2018-04-16 15:26:54 -07:00
Jerry Needell
e55e06d501
modify tick.c to work when interrupts disabled - modify PulseIn.c to cast argument to common_hal_delay_us
2018-04-16 08:11:14 -04:00
Noralf Trønnes
8e2080411f
atmel-samd: Add rtc module support
...
Support the rtc module by using hal_calendar.
2018-04-16 13:15:08 +02:00
Scott Shawcroft
812fe0c93f
Turn on nvm in 3.0.
...
Its 256b on M0 and 8k on M4 to match flash erase sizes.
Fixes #758
2018-04-13 16:22:28 -07:00
Scott Shawcroft
22194d5977
Tweaks based on dhalbert's feedback.
2018-04-13 10:51:01 -07:00
Scott Shawcroft
8dcfeb6240
Fix Makefile
2018-04-12 18:17:46 -07:00
Scott Shawcroft
28642ab10d
Add audio output support!
...
This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.
Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.
Fixes #652 . Fixes #522 . Huge progress on #263
2018-04-12 16:35:13 -07:00
Scott Shawcroft
2a26dac2bc
Add initial ItsyBitsy M4 support
2018-04-12 11:16:52 -07:00
Dan Halbert
eaa9923a8f
force_create rename got lost due to editing error
2018-04-10 12:24:27 -04:00
Dan Halbert
5f98953ed8
esp8266 and nrf: raise NotImplementedError
2018-04-10 12:08:41 -04:00
Jeff Epler
eb7d0e317a
Create genhdr/ directory in time
2018-04-09 22:23:39 -04:00
Dan Halbert
aa8c262d14
add storage.erase_filesystem() to erase and reformat CIRCUITPY
2018-04-09 12:52:42 -04:00
Scott Shawcroft
4e053cea0d
Merge pull request #628 from sommersoft/super_status
...
Added Function To Check the Serial Connection From CircuitPython Layer
2018-04-08 22:06:09 -07:00
Dan Halbert
1e87a785b9
Move CDC Comm back to Interface 0 for compat with Win7 drivers.
2018-04-08 15:59:19 -04:00
Dan Halbert
726d5e52a3
Merge branch 'master' into 3.0_hid
2018-04-08 09:52:29 -04:00
Dan Halbert
a159b85340
Reorder composite device interfaces; fix report length bug
2018-04-08 09:33:02 -04:00
Jeff Epler
fe6f5aaa70
atmel-samd: reset: reset() was always entering bootloader mode
...
.. set the dbl_tap word to a different special value unless
RUNMODE_BOOTLOADER was selected
2018-04-05 08:16:53 -05:00
Jeff Epler
5eb9f9d060
atmel-samd: Fix rebooting to bootloader
...
Commit efbf08266badafruit/circuitpython@efbf08266b . However, I only tested on
trinket_m0.
Closes : #739
2018-04-03 21:40:10 -05:00
Dan Halbert
beb6ad2e40
Add USB HID support, including Consumer Control
2018-04-02 21:37:44 -04:00
Dan Halbert
435e894fa0
Merge branch 'master' into 3.0_hid
2018-04-02 19:19:43 -04:00
Dan Halbert
d005b12326
WIP: seems to be done
2018-04-02 19:08:18 -04:00
Dan Halbert
c00b25ec45
WIP: HID works with MSC interfaces removed
2018-03-30 23:31:28 -04:00
Dan Halbert
df91878d2e
WIP: works with just keyboard but not complex report descriptor
2018-03-30 23:24:00 -04:00
sommersoft
8af98d0dc9
ambiguized directory paths
2018-03-30 22:44:16 +00:00
sommersoft
a5b60647be
improved arrangement
2018-03-30 22:26:21 +00:00
sommersoft
7c0be04696
verbiage cleanup
2018-03-30 22:21:35 +00:00
sommersoft
c70acab8b3
updated README; added git submodule info
2018-03-30 22:16:36 +00:00
sommersoft
6ee573c7c9
Merge branch 'master' into super_status
2018-03-30 14:27:39 -05:00
Scott Shawcroft
676ed4e199
Merge pull request #724 from tannewt/fix_freetouch_submodule
...
Remove freetouch files that were accidentally checked in and
2018-03-28 14:24:32 -07:00
Scott Shawcroft
19b0b414e6
Remove freetouch files that were accidentally checked in and
...
readd the submodule.
2018-03-28 14:04:53 -07:00
Jeff Epler
abec199c19
Enable high-quality float hash
...
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.
Closes : #704
2018-03-27 21:56:30 -05:00
Dan Halbert
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis
...
Allow building on gcc 5.4, while preserving ability to build with 7.2
2018-03-27 09:28:41 -04:00
Kattni
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang
...
Fix I2C init hang when the SCL pin is pulled low.
2018-03-26 20:08:14 -04:00
Dan Halbert
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis
...
Remove 'O', 'P' support in arrays
2018-03-26 20:01:34 -04:00
Scott Shawcroft
cebcec5e63
Check for floating pins by pulling them low briefly before testing their values.
2018-03-26 16:32:16 -07:00
Jeff Epler
355bf8b553
Conditionally compile out nonstandard array/struct typecodes
...
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
2018-03-26 18:13:49 -05:00
Scott Shawcroft
25ba8ee489
Add an s because grammar.
2018-03-26 15:21:08 -07:00
Scott Shawcroft
37538fc0e7
Fix I2C init hang when the SCL pin is pulled low.
...
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
2018-03-26 15:13:52 -07:00
Scott Shawcroft
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix
...
Fix 128 Character Max Paste Into REPL
2018-03-26 13:02:43 -07:00
sommersoft
9bd55cf4c7
minor cleanup
2018-03-26 08:14:37 -05:00
sommersoft
23009fdd63
future-proof for buffer size changes
2018-03-26 06:25:04 +00:00
Dan Halbert
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis
...
correct typo in filename
2018-03-25 23:58:00 -04:00
Jeff Epler
d57397f9c8
Remove an unneeded -Wno-error=lto-type-mismtach
2018-03-25 22:04:15 -05:00
Jeff Epler
c0029e1d97
Don't lose half of the processor's serial number
...
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
2018-03-25 13:01:04 -05:00
Dan Halbert
31f5b6a238
WIP: simple working HID
2018-03-24 18:29:12 -04:00
Jeff Epler
d80e54458d
correct typo in filename
2018-03-24 10:44:24 -05:00
sommersoft
6205ed9a0c
updated cdc_enabled; now more dynamic status return
2018-03-24 03:42:58 +00:00
sommersoft
ef16109c5d
updated with requested changes
2018-03-24 00:55:48 +00:00
sommersoft
f237657e5e
extended buffer check to usb_cdc_background
2018-03-23 18:41:27 +00:00
Scott Shawcroft
63d826a52a
Update USB PID
2018-03-23 09:34:02 -07:00
sommersoft
ccbe557e30
removed leftover debugging bits
2018-03-23 15:45:30 +00:00
sommersoft
d434635822
add buffer check before triggering new usb read
2018-03-23 15:07:02 +00:00
Scott Shawcroft
fd7dcff4e9
Add Feather M4 Express support.
...
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
2018-03-23 00:00:13 -07:00
Scott Shawcroft
06b4c83f59
Add reminder to remove Saleae when going fast.
2018-03-22 17:44:44 -07:00
Scott Shawcroft
3bf4d69f67
Update Metro M4 to rev F and make flash reset on start.
2018-03-22 16:42:47 -07:00
Jeff Epler
a7e3c74fed
Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive
...
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.
It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.
These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.
Closes : #689
2018-03-22 08:07:32 -05:00
Scott Shawcroft
9ab39eb2d2
Merge pull request #688 from jepler/atsamd-build-reqs
...
Better document build requirements and steps
2018-03-20 10:03:01 -07:00
Scott Shawcroft
0f90f35606
Merge pull request #685 from jepler/uart-diagnostic
...
UART: Fix maybe-uninitialized diagnostic
2018-03-20 09:59:31 -07:00
Jeff Epler
3f82fe8da9
README.rst: document mpy-cross gotcha
...
This was biting me, leading to an odd error later on.
2018-03-20 07:53:30 -05:00
Jeff Epler
fa491b4c32
README.rst: spell out gcc version requirements
...
.. the text was adapted from ports/stm32 and a conversation with
Dan Halbert.
2018-03-20 07:53:30 -05:00
Jeff Epler
dddfad6594
UART: Fix maybe-uninitialized diagnostic
...
The following error occurs when building with gcc 5.4.1 (debian stretch):
common-hal/busio/UART.c:104:83: error: 'sercom_index' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sercom_insts[rx->sercom[j].index]->USART.CTRLA.bit.ENABLE == 0) ||
It may be related to the addition of rx-only UARTs; gcc is unable
to infer the intended relationship between have_tx and sercom_index
being set (I am still not entirely confident of it myself)
2018-03-19 20:40:04 -05:00
Kattni
05e2a7d1ac
Added digital pin assignments
2018-03-15 20:28:09 -04:00
jerryneedell
04b4026666
fix dotstar for Gemma_M0 in CP3.0
...
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access. same issue as #514 for trinket_m0
2018-03-14 21:28:56 -04:00
Dan Halbert
f173d45941
Merge pull request #678 from tannewt/m0_no_timer_fix
...
Correct NO_TIMER index value for SAMD21.
2018-03-14 15:04:39 -04:00
Scott Shawcroft
88aa0e2660
Remove SERCOM pointers from pin data structure because index is
...
enough.
This saves 380 bytes on the Arduino Zero build. (More pins ==
more savings.)
2018-03-14 11:14:32 -07:00
Scott Shawcroft
7a3f86d184
Check usb_busy up front in usb background function.
...
Waiting to do so risks accidentally queueing another response.
Hopefully fixes #655 but we'll let @jerryneedell confirm.
2018-03-14 10:32:41 -07:00
Scott Shawcroft
c37ade9aeb
Correct NO_TIMER index value for SAMD21.
...
We check validity by ensuring it's lower than the total number of
timers. 0 is a terrible number for the NO_TIMER value because its
valid even though it shouldn't be.
Fixes https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO/issues/29
2018-03-13 12:44:00 -07:00
Dan Halbert
b64d568267
Merge pull request #677 from tannewt/usb_active_read
...
Move usb read finish into interrupt.
2018-03-13 15:16:40 -04:00
Scott Shawcroft
8157248189
Move usb read finish into interrupt.
...
Having the `active_read = false` in the background function left
a chance that a new_write occurs before active_read is set to false.
In that case, we'll read the appropriate data rather than write it
and never clear the active write.
Hopefully fixes #655 .
2018-03-13 11:29:29 -07:00
vesperk38
945f2f5aa1
line 172 has a typo correct 2MB to 4MB
2018-03-13 13:42:29 -04:00
Radomir Dopieralski
81ab2526e4
gamepad: Enable the gamepad module for express boards in 3.x
2018-03-11 13:39:54 +01:00
Scott Shawcroft
e7fc0b6aa7
Use DMA for long SPI transactions including those to the SPI Flash.
...
QSPI is not currently working so its commented out.
This is progress on #652 .
2018-03-09 12:45:46 -08:00
Bryan Siepert
942b7ffbe0
fixes hardware dotstar support for 3.0 and addresses issue #514
2018-03-08 20:39:47 -08:00
sommersoft
c1c3a79ec4
atmel-samd: changed Status to Runtime; instituted runtime singleton
2018-03-09 02:19:51 +00:00
Scott Shawcroft
01aceaae50
Support all boards and remove erase and page sizes because they never change.
2018-03-01 12:45:12 -08:00
Scott Shawcroft
2ab923862b
Structify flash device definitions.
2018-02-28 19:15:54 -08:00
Dan Halbert
568c04e6af
Merge pull request #650 from tannewt/merge_2x
...
Merge in commits from 2.x branch.
2018-02-27 22:03:52 -05:00
Scott Shawcroft
bf05183158
Merge remote-tracking branch 'adafruit/2.x' into merge_2x
2018-02-27 15:24:16 -08:00
Dan Halbert
5c24023240
use CONF_GCLK_DAC_SRC and refactor a bit
2018-02-27 17:21:03 -05:00
Dan Halbert
4895a9d1d8
Use safe clock freqs for AnalogOut; use DAC REFRESH on SAMD51.
2018-02-27 15:44:27 -05:00
Bryan Siepert
e42209a6b2
fixes timer number assumptions for samd51s for issue #646
2018-02-27 00:42:40 -08:00
Dan Halbert
cc7acfd491
consistently brand Itsy Bitsy M0 as 'Express'
2018-02-26 17:37:03 -05:00
Dan Halbert
957a82b592
add board.RX and .TX pins to metro_m4_express_revb
2018-02-23 09:54:39 -05:00
Kattni
7399a1a5c7
Merge pull request #634 from dhalbert/3.0_UART
...
Implement UART for 3.0 + related fixes.
2018-02-21 23:07:27 -05:00
Dan Halbert
9b4477e1dc
Implement UART for 3.0 + related fixes.
...
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.
2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
a. async USART driver
b. bringing Atmel START configuration closer to what we use
c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
2018-02-21 17:18:49 -05:00
James Devine
9c5a9e3411
Update boards URL in README.rst
...
Corrected a (probably) old URL in the read me.
2018-02-21 16:14:46 +00:00
Scott Shawcroft
d02251f8cd
Add a new board for Metro M4 Express Rev B. This is the board
...
send to community members for testing.
Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
2018-02-20 12:34:07 -08:00
Scott Shawcroft
653fc8877d
Remove breakpoint instruction used for debugging.
2018-02-19 21:38:14 -08:00
sommersoft
60d6ccc731
changed spaced supervisor/Status.c line to tabbed
2018-02-20 03:44:45 +00:00
Scott Shawcroft
15f626be58
m4 qspi works. m0 compiles
2018-02-19 14:02:04 -08:00
Scott Shawcroft
f20d5723aa
Reorganize things. Reading jdec works.
2018-02-19 14:02:04 -08:00
Scott Shawcroft
4710a2adba
Compiles for m4. Untested on m0.
...
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
2018-02-19 14:02:04 -08:00
Scott Shawcroft
a2bd772d5c
Begin rework to add qspi support.
2018-02-19 14:02:04 -08:00
sommersoft
9ee4d13756
added Status submodule to ports/atmel-samd/common-hal/supervisor; issue #544
2018-02-19 20:49:18 +00:00
Scott Shawcroft
a2b18b75d4
Fix loops and comma style.
2018-02-16 10:05:28 -08:00
Scott Shawcroft
eb2b41810a
Turn on lto
2018-02-15 16:12:58 -08:00
Scott Shawcroft
538081528d
pulsein works on m0
2018-02-15 16:04:39 -08:00
Scott Shawcroft
fcde138ea3
pulsein works on m4
2018-02-15 15:12:58 -08:00
Scott Shawcroft
07230f2637
pulsein compiles but doesn't work
2018-02-14 16:59:04 -08:00
Scott Shawcroft
c7af17525b
m4 pulseout works
2018-02-14 11:38:52 -08:00
Scott Shawcroft
6a7d889dd4
m0 pulseout works. Factored out shared timer code.
2018-02-13 18:17:20 -08:00
Scott Shawcroft
8479eef578
m0 tc and tcc work
2018-02-13 16:44:04 -08:00
Scott Shawcroft
6c3075bec6
m4 tc and tcc works. multi-tcc channels ok too.
2018-02-13 14:22:55 -08:00
Scott Shawcroft
cc616aea4e
m4 tc output works. Watch out for the PAC!
2018-02-12 23:41:26 -08:00
Scott Shawcroft
0397202288
m4 compiles, pwmout implemented but TC0 (A1) doesn't run
2018-02-09 17:21:06 -08:00
Scott Shawcroft
0398f308fa
m4 compiles, pwmout implemented
2018-02-09 16:37:27 -08:00
Scott Shawcroft
190e7d629e
WIP
2018-02-09 16:37:27 -08:00
Dan Halbert
b001c0711b
Correct _etext location; clean up .ld files
...
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
2018-02-09 11:31:18 -05:00
Dan Halbert
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio
...
Enable bitbangio now that we have digitalio.
2018-02-08 21:24:32 -05:00
Scott Shawcroft
3e63f59867
Use write instead of set because it clears the bits before setting them.
2018-02-08 16:12:33 -08:00
Scott Shawcroft
aeae0090af
Enable bitbangio now that we have digitalio.
...
Also remove a rogue neopixel_write.
2018-02-08 16:03:05 -08:00
Scott Shawcroft
82bc11585e
ports/atmel-samd: Re-enable analogio
...
This introduces SAMD51 support and re-enables SAMD21 support.
Fixes #263
2018-02-08 14:48:08 -08:00
Bryan Siepert
dfc2b82ede
Added SAMD51G support as per issue #597
2018-02-07 21:23:25 -08:00
Dan Halbert
eb49359aec
CPX: typo in mpconfigboard.h broke CIRCUITPY
2018-01-30 15:48:22 -05:00
Dan Halbert
e550b024c5
atmel-samd: Correct computation of SPI baud rate.
...
all: Add .frequency read-only property for busio.SPI to return actual frequency.
Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
Dan Halbert
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0
...
Update ugame port for the final ugame10 version
2018-01-29 13:35:06 -08:00
Radomir Dopieralski
d595a03bbd
Update ugame port for the final ugame10 version
...
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
2018-01-29 22:19:09 +01:00
Radomir Dopieralski
189c62ac7d
Bring back the _stage library
...
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
2018-01-29 21:24:46 +01:00
Dan Halbert
efbf08266b
make _estack be double-word aligned
2018-01-24 19:24:36 -05:00
Scott Shawcroft
6560596864
Switch to m_malloc_maybe and m_free to reduce our dependence on gc_alloc.
...
gc_alloc's API is changing and we shouldn't need to care about it.
So, we switch to m_malloc which has the default behavior we expect.
2018-01-23 16:45:07 -08:00
brentrubell
ab1f133667
issue #536 CPX change SPI pin designations to externally available pins ( #540 )
...
* issue #536 CPX
* switched pin assignment
2018-01-22 19:31:55 -08:00
Tony DiCola
4bd1d09d74
Add missing Feather M0 RadioFruit boards: RFM69, RFM9x ( #539 )
2018-01-19 11:53:47 -08:00
sommersoft
44bc1711aa
Added Unique ID Functions/Updated Support Matrix ( #527 )
...
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448 .
shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes #462 .
2018-01-18 11:39:11 -08:00
Dan Halbert
01443a9619
Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf.
...
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
2018-01-16 18:11:54 -08:00
Dan Halbert
2d5483082d
Checked wrong RCAUSE bit for system_reset
2018-01-08 15:45:07 -08:00
Dan Halbert
1805bcac76
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge) ( #513 )
...
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge)
RCAUSE (reset cause) is fetched differently in SAMD21 vs SAMD51
2018-01-08 09:44:06 -08:00
Dan Halbert
d0cc8abd31
revise boards/ files for 3.0. All now compiled (but I don't have all to test).
2018-01-04 14:16:53 -05:00
Dan Halbert
d8686cc002
use correct LD_FILE in mpconfigboard.mk for boards with external flash
2018-01-03 16:49:38 -05:00
Dan Halbert
065e82015f
merge from 2.2.0 + fix up board defs
2018-01-02 21:25:41 -05:00
Dan Halbert
ce81c8dda9
Avoid gcc 7.2.1 compiler issues in nlr_push() ( #506 )
...
Avoid gcc 7.2.1 compiler issues in nlr_push()
2018-01-02 13:41:34 -08:00
Dan Halbert
72c911be97
Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now.
2017-11-27 21:00:24 -05:00
Stewart
fb1dcd326d
ports/atmel-samd: feather_m0_adalogger readme updates ( #460 )
...
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
- Added Setup information regarding arm complier packages
- README - Updated to reflect that feather_m0_adalogger microSD is supported
2017-11-26 21:10:01 -08:00
Stewart Colborne
5eb7958425
ports/atmel-samd/boards/feather_m0_adalogger/pins: Added missing pins
...
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
2017-11-25 22:00:32 -08:00
mrmcwethy
e0eae5cb2a
Enable the Neopixel status light on Metro M0 Express and Feather M0 Express boards
2017-11-21 14:39:56 -08:00
Dan Halbert
6f662e9bbc
samd51 peripheral clocks were defined as 12MHz, but were really 120MHz
2017-11-20 21:11:30 -08:00
Dan Halbert
a9f75a71c5
Merge pull request #443 from dhalbert/3.0_spi
...
non-DMA SPI working; adding this now for testing; will continue with DMA
2017-11-16 19:28:24 -05:00
Dan Halbert
312444bbd2
non-DMA SPI working; adding this now for testing; will continue with DMA
...
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5
Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
2017-11-16 19:09:35 -05:00
Scott Shawcroft
ecc47d5258
Create supervisor module.
...
It can control autoreload and the rgb status led.
2017-11-16 09:04:17 -08:00
Scott Shawcroft
ef9a7f262a
atmel-samd: Turn off nvmctl cache and rework active_read.
2017-11-08 16:01:38 -08:00
Scott Shawcroft
971bd7e9a6
atmel-samd: Improve MSC reliability.
...
* Be more liberal with critical sections to ensure ordering.
* Correct usb_busy so that it is busy when no errors occur on
transfer. I believe it worked before because it would be false
momentarily until a second transfer was attempted and a busy
error was returned, therefore setting usb_busy to true. That
risks the first "failed" transfer completing before a second one
is attempted.
2017-11-08 12:42:50 -08:00
Scott Shawcroft
7a901cfccd
atmel-samd: Align SCSI responses.
2017-11-08 10:47:22 -08:00
Scott Shawcroft
3cb5e7ea58
atmel-samd: Update Feather M0 Express USB PID
...
This makes it different from the bootloaders and Arduino.
2017-11-07 14:26:37 -08:00
Dan Halbert
9060df5af6
DigitalInOut: Use pin value % 32 to accomodate PORTB and up.
...
Fixes #407 .
2017-11-07 10:08:34 -08:00
Dan Halbert
7292984204
Implement busio.I2c.
...
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.
simpler reset of SERCOMs; remove unused routine
2017-11-07 09:59:54 -08:00
Scott Shawcroft
182a946b0e
atmel-samd: Tweak mass storage code to finish read sooner.
2017-11-06 16:30:11 -08:00
Scott Shawcroft
a8ee0012d7
atmel-samd: Enable -Os for SAMD51 and update neopixel accordingly.
2017-11-06 16:30:11 -08:00
Scott Shawcroft
4140b3b944
atmel-samd: Stop double CSW after MSC reads
...
This explicit zero length xfer leads to a second CSW packet. If
another read was started between the two CSWs then the host gets
confused and resets the device.
On reads, the CSW is automatically sent when we reply with the
total length. Writes must do it manually so they can wait for the
disk to flush the data.
2017-11-03 15:08:55 -07:00
Scott Shawcroft
c90a2d9b42
atmel-samd: Fix SAMD51 SWCLK reset so we can connect the JLink
...
while CircuitPython is running.
2017-11-02 14:00:38 -07:00
Scott Shawcroft
a49200d5cb
tools: Switch to using separate usb_descriptor repo.
2017-11-02 13:00:50 -07:00
Scott Shawcroft
3cfb06042e
atmel-samd: update to October 2017 ASF4.
2017-11-02 12:19:50 -07:00
Scott Shawcroft
a8dae22ae9
atmel-samd: Fix the neopixel delay method so it handles overflow better.
2017-11-01 11:56:54 -07:00
Dan Halbert
3b17980822
Merge pull request #391 from tannewt/longint_usb_fix
...
Enable LONGINT on M4 + usb fix
2017-11-01 14:19:17 -04:00
Scott Shawcroft
cfbb74ffe7
atmel-samd: Reorder mpconfigport.mk and mpconfigboard.mk includes.
...
This allows mpconfigport.mk to set this conditionally based on
$(CHIP_FAMILY).
2017-11-01 11:01:34 -07:00
Dan Halbert
0076a3c868
Merge pull request #393 from tannewt/m4_neopixel
...
Now with more blinky!!!
2017-11-01 08:17:41 -04:00
Scott Shawcroft
f4c8256345
atmel-samd: Add TX/RX led support for Metro M4.
2017-10-31 22:39:16 -07:00
Scott Shawcroft
54f2b698ce
atmel-samd: remove infinite loop if USB MSC read fails.
2017-10-31 22:38:52 -07:00
Scott Shawcroft
3177e10e9e
atmel-samd: Add samd21 neopixel support.
...
Also, fix and enable the status neopixel.
Fixes #264
2017-10-31 22:38:09 -07:00
Tony DiCola
d023879bea
atmel-samd: Update and enable neopixel_write for ASF4, tested on SAMD21 only.
2017-10-31 16:06:36 -07:00
Scott Shawcroft
15dcc7011c
atmel-samd: Turn on slice assignment in all builds.
...
This costs 376 bytes on a Trinket M0 leaving 33412 bytes free.
Fixes #193
2017-10-31 15:57:56 -07:00
Scott Shawcroft
9db321d505
atmel-samd: Enable longints for M4 builds.
...
Fixes #110
2017-10-31 15:46:42 -07:00
Scott Shawcroft
268bf6f99e
atmel-samd: Fix non-DEBUG USB cdc.
...
I believe the issue was that LTO exacerbates a problem where a CDC
read is initiated but fails and leaves pending_read true
preventing further reads.
2017-10-31 15:43:45 -07:00
Radomir Dopieralski
8c7571a75d
Create the build directory before running gen_usb_descriptor
...
Otherwise it fails to create the file in that directory.
2017-10-31 13:35:22 -07:00
Scott Shawcroft
4aeef100f6
atmel-samd: More USB polish
...
* Introduce a python script to generate the USB descriptor instead of
a bunch of C macros. In the future, we can use this dynamically in
CircuitPython.
* Add support for detecting read-only mass storage mounts.
Fixes #377
2017-10-30 18:29:20 -07:00
Dan Halbert
8e45dc041f
Read serial input as a background task so we can check for the interrupt character.
2017-10-27 17:32:13 -04:00
Dan Halbert
10b3a90189
Check INTERNAL_LIBM make flag in a safer way.
2017-10-27 17:32:13 -04:00
Dan Halbert
7f88ba3b26
Revert "Allow main.py to be interrupted by ctrl-C" ( #381 )
...
* Revert "Read serial input as a background task so we can check for the interrupt character."
This reverts commit 046092e8a22b80add22f
2017-10-27 17:32:13 -04:00
Dan Halbert
2487226dff
Read serial input as a background task so we can check for the interrupt character.
2017-10-27 17:32:13 -04:00
Dan Halbert
f0a12d9620
Check INTERNAL_LIBM make flag in a safer way.
2017-10-27 17:32:13 -04:00
Dan Halbert
4232a0a196
Sync with https://github.com/adafruit/asf4/pull/3
2017-10-26 09:30:59 -04:00
Scott Shawcroft
ee18b5cbab
Don't use ERR_ABORTED. ( #375 )
2017-10-26 09:08:29 -04:00
Scott Shawcroft
d613776f0d
atmel-samd: Add support for ERR_ABORTED to indicate medium not present.
2017-10-25 21:02:01 -04:00
Scott Shawcroft
ab7da9353a
atmel-samd: Stop hanging on usb write when a terminal isn't connected by checking DTR status.
2017-10-25 21:02:01 -04:00
Scott Shawcroft
73c15dcf8b
Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge
...
This is prep for merging in the NRF5 pull request.
2017-10-24 22:31:16 -07:00
