circuitpython/locale/fr.po

# SPDX-FileCopyrightText: 2018 Pierrick Couturier <arofarn@arofarn.info>
# SPDX-FileCopyrightText: 2018 Olivier Deveault <odeevee@outlook.com>
# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors)
#
# SPDX-License-Identifier: MIT
msgid ""
msgstr ""
"Project-Id-Version: 0.1\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-11-27 23:57-0500\n"
"PO-Revision-Date: 2020-11-24 22:45+0000\n"
"Last-Translator: Antonin ENFRUN <antonin.e@me.com>\n"
"Language: fr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n > 1;\n"
"X-Generator: Weblate 4.4-dev\n"

#: main.c
msgid ""
"\n"
"Code done running. Waiting for reload.\n"
msgstr ""
"\n"
"Fin d'exécution du code. En attente de rechargement.\n"

#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with the contents of your CIRCUITPY drive at \n"
"https://github.com/adafruit/circuitpython/issues\n"
msgstr ""
"\n"
"Veuillez signaler un problème avec le contenu de votre lecteur CIRCUITPY à "
"l'adresse\n"
"https://github.com/adafruit/circuitpython/issues\n"

#: py/obj.c
msgid "  File \"%q\""
msgstr "  Fichier \"%q\""

#: py/obj.c
msgid "  File \"%q\", line %d"
msgstr "  Fichier \"%q\", ligne %d"

#: main.c
msgid " output:\n"
msgstr " sortie :\n"

#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c nécessite un entier 'int' ou un caractère 'char'"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
msgstr ""
"Les broches d'adresse %d et les broches RVB %d indiquent une hauteur de %d, "
"pas %d"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr "Échec de %q : %d"

#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q utilisé"

#: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c
#: py/objstrunicode.c
msgid "%q index out of range"
msgstr "index %q hors gamme"

#: py/obj.c
msgid "%q indices must be integers, not %q"
msgstr "indices %q doivent être des chiffres entier, et non %q"

#: shared-bindings/vectorio/Polygon.c
msgid "%q list must be a list"
msgstr "La liste %q doit être une liste"

#: shared-bindings/memorymonitor/AllocationAlarm.c
msgid "%q must be >= 0"
msgstr "%q doit être >= 0"

#: shared-bindings/_bleio/CharacteristicBuffer.c
#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/Shape.c
#: shared-bindings/memorymonitor/AllocationAlarm.c
#: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c
msgid "%q must be >= 1"
msgstr "%q doit être >=1"

#: shared-module/vectorio/Polygon.c
msgid "%q must be a tuple of length 2"
msgstr "%q doit être un tuple de longueur 2"

#: shared-bindings/canio/Match.c
msgid "%q out of range"
msgstr "%q est hors de porté"

#: ports/atmel-samd/common-hal/microcontroller/Pin.c
msgid "%q pin invalid"
msgstr "PIN %q invalide"

#: shared-bindings/fontio/BuiltinFont.c
msgid "%q should be an int"
msgstr "%q doit être un entier (int)"

#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() prend %d arguments positionnels mais %d ont été donnés"

#: py/argcheck.c
msgid "'%q' argument required"
msgstr "'%q' argument requis"

#: py/runtime.c
msgid "'%q' object cannot assign attribute '%q'"
msgstr "l'objet '%q' ne peut avoir l'attribut '%q'"

#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr "l'objet '%q' ne supporte pas '%q'"

#: py/obj.c
msgid "'%q' object does not support item assignment"
msgstr "l'objet '%q' ne supporte pas l'assignement d'objets"

#: py/obj.c
msgid "'%q' object does not support item deletion"
msgstr "l'objet '%q' ne supporte pas la suppression d'objet"

#: py/runtime.c
msgid "'%q' object has no attribute '%q'"
msgstr "l'objet '%q' n'as pas d'attribut '%q'"

#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr "l'objet '%q' n'est pas un itérateur"

#: py/objtype.c py/runtime.c
msgid "'%q' object is not callable"
msgstr "l'objet '%q' ne peut pas être appelé"

#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr "l'objet '%q' n'est pas itérable"

#: py/obj.c
msgid "'%q' object is not subscriptable"
msgstr "l'objet '%q' n'est pas souscriptable"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' attend un label"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' attend un registre"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' attend un registre spécial"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' attend un registre FPU"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' attend une adresse de la forme [a, b]"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' attend un entier"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' s'attend au plus à r%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' attend {r0, r1, ...}"

#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d is not within range %d..%d"
msgstr "'%s' l'entier %d n'est pas dans la gamme %d..%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x does not fit in mask 0x%x"
msgstr "'%s' l'entier 0x%x ne correspond pas au masque 0x%x"

#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr "'=' alignement non autorisé dans la spéc. de format de chaîne"

#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "'S' et 'O' ne sont pas des types de format supportés"

#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' nécessite 1 argument"

#: py/compile.c
msgid "'await' outside function"
msgstr "'await' en dehors d'une fonction"

#: py/compile.c
msgid "'await', 'async for' or 'async with' outside async function"
msgstr "'await', 'async for' ou 'async with' au dehors d'une fonction async"

#: py/compile.c
msgid "'break' outside loop"
msgstr "'break' en dehors d'une boucle"

#: py/compile.c
msgid "'continue' outside loop"
msgstr "'continue' en dehors d'une boucle"

#: py/objgenerator.c
msgid "'coroutine' object is not an iterator"
msgstr "L'objet « coroutine » n'est pas un itérateur"

#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' nécessite au moins 2 arguments"

#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' nécessite des arguments entiers"

#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' nécessite 1 argument"

#: py/compile.c
msgid "'return' outside function"
msgstr "'return' en dehors d'une fonction"

#: py/compile.c
msgid "'yield from' inside async function"
msgstr "'yield from' dans une fonction async"

#: py/compile.c
msgid "'yield' outside function"
msgstr "'yield' en dehors d'une fonction"

#: py/compile.c
msgid "*x must be assignment target"
msgstr "*x doit être la cible de l'assignement"

#: py/obj.c
msgid ", in %q\n"
msgstr ", dans %q\n"

#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr "0.0 à une puissance complexe"

#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "pow() non supporté avec 3 arguments"

#: ports/atmel-samd/common-hal/countio/Counter.c
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "Un canal d'interruptions matérielles est déjà utilisé"

#: ports/esp32s2/common-hal/analogio/AnalogIn.c
msgid "ADC2 is being used by WiFi"
msgstr "ADC2 est utilisé pars le Wifi"

#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
#, c-format
msgid "Address must be %d bytes long"
msgstr "L'adresse doit être longue de %d octets"

#: shared-bindings/_bleio/Address.c
msgid "Address type out of range"
msgstr "Type d'adresse hors plage"

#: ports/esp32s2/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
msgstr "Tous les périphériques CAN sont utilisés"

#: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Tous les périphériques I2C sont utilisés"

#: ports/esp32s2/common-hal/countio/Counter.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr "Toutes les unités PCNT sont utilisées"

#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/esp32s2/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "All RX FIFOs in use"
msgstr "Tout les RX FIFOs sont utilisé"

#: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Tous les périphériques SPI sont utilisés"

#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "All UART peripherals are in use"
msgstr "Tous les périphériques UART sont utilisés"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Tous les canaux d'événements sont utilisés"

#: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "All sync event channels in use"
msgstr "Tous les canaux d'événements de synchro sont utilisés"

#: shared-bindings/pwmio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Tous les timers pour cette broche sont utilisés"

#: ports/atmel-samd/common-hal/_pew/PewPew.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/neopixel_write/__init__.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
msgid "All timers in use"
msgstr "Tous les timers sont utilisés"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr "S'annonce déjà."

#: ports/atmel-samd/common-hal/canio/Listener.c
msgid "Already have all-matches listener"
msgstr "Il y a déjà un auditeur all-matches"

#: shared-module/memorymonitor/AllocationAlarm.c
#: shared-module/memorymonitor/AllocationSize.c
msgid "Already running"
msgstr "Déjà en cours d'exécution"

#: ports/esp32s2/common-hal/wifi/Radio.c
msgid "Already scanning for wifi networks"
msgstr "Déjà à la recherche des réseaux wifi"

#: ports/cxd56/common-hal/analogio/AnalogIn.c
msgid "AnalogIn not supported on given pin"
msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée"

#: ports/cxd56/common-hal/analogio/AnalogOut.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
#: ports/nrf/common-hal/analogio/AnalogOut.c
msgid "AnalogOut functionality not supported"
msgstr "Fonctionnalité AnalogOut non supportée"

#: shared-bindings/analogio/AnalogOut.c
msgid "AnalogOut is only 16 bits. Value must be less than 65536."
msgstr ""
"AnalogOut est seulement 16 bits. Les valeurs doivent être inf. à 65536."

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
msgid "AnalogOut not supported on given pin"
msgstr "'AnalogOut' n'est pas supporté sur la broche indiquée"

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Un autre envoi est déjà actif"

#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr "Le tableau doit contenir des demi-mots (type 'H')"

#: shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Les valeurs du tableau doivent être des octets simples 'bytes'."

#: shared-bindings/microcontroller/Pin.c
msgid "At most %d %q may be specified (not %d)"
msgstr "Au plus %d %q peut être spécifié (pas %d)"

#: shared-module/memorymonitor/AllocationAlarm.c
#, c-format
msgid "Attempt to allocate %d blocks"
msgstr "Tentative d'allocation de %d blocs"

#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when MicroPython VM not running."
msgstr ""
"Tentative d'allocation de segments lorsque la machine virtuelle MicroPython "
"n'est pas en cours d'exécution."

#: shared-bindings/wifi/Radio.c
msgid "Authentication failure"
msgstr "Échec d'authentification"

#: main.c
msgid "Auto-reload is off.\n"
msgstr "L'auto-chargement est désactivé.\n"

#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Auto-chargement activé. Copiez simplement les fichiers en USB pour les "
"lancer ou entrez sur REPL pour le désactiver.\n"

#: ports/esp32s2/common-hal/canio/CAN.c
msgid "Baudrate not supported by peripheral"
msgstr "Baudrate non prise en charge par le périphérique"

#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr "Inférieur à la fréquence d'images minimale"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr "'bit clock' et 'word select' doivent partager une horloge"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Bit depth must be from 1 to 6 inclusive, not %d"
msgstr "Bit depth doit être compris entre 1 et 6 inclus, et non %d"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "La profondeur de bit doit être un multiple de 8."

#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Both RX and TX required for flow control"
msgstr "RX et TX requis pour le contrôle de flux"

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Les deux entrées doivent supporter les interruptions matérielles"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "Brightness must be 0-1.0"
msgstr "La luminosité doit être de 0 à 1.0"

#: shared-bindings/supervisor/__init__.c
msgid "Brightness must be between 0 and 255"
msgstr "La luminosité doit être entre 0 et 255"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Brightness not adjustable"
msgstr "Luminosité non-ajustable"

#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr "Tampon + décalage trop petit %d %d %d"

#: shared-module/usb_hid/Device.c
#, c-format
msgid "Buffer incorrect size. Should be %d bytes."
msgstr "Tampon de taille incorrect. Devrait être de %d octets."

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is not a bytearray."
msgstr "Le tampon n'est pas un 'bytearray'."

#: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is too small"
msgstr "Le tampon est trop petit"

#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr "La longueur du tampon %d est trop grande. Il doit être inférieur à %d"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
msgid "Buffer length must be a multiple of 512"
msgstr "La longueur de la mémoire tampon doit être un multiple de 512"

#: ports/stm/common-hal/sdioio/SDCard.c
msgid "Buffer must be a multiple of 512 bytes"
msgstr "La mémoire tampon doit être un multiple de 512"

#: shared-bindings/bitbangio/I2C.c shared-bindings/busdevice/I2CDevice.c
#: shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Le tampon doit être de longueur au moins 1"

#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Buffer too large and unable to allocate"
msgstr "Tampon trop volumineux et impossible à allouer"

#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr "Tampon trop court de %d octets"

#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
#, c-format
msgid "Bus pin %d is already in use"
msgstr "La broche %d du bus est déjà utilisée"

#: shared-bindings/_bleio/UUID.c
msgid "Byte buffer must be 16 bytes."
msgstr "Le tampon doit être de 16 octets."

#: shared-bindings/nvm/ByteArray.c
msgid "Bytes must be between 0 and 255."
msgstr "Les octets 'bytes' doivent être entre 0 et 255."

#: shared-bindings/aesio/aes.c
msgid "CBC blocks must be multiples of 16 bytes"
msgstr "Les blocs CBC doivent être des multiples de 16 octets"

#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr "Appelez super () .__ init __ () avant d'accéder à l'objet natif."

#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "Can't set CCCD on local Characteristic"
msgstr "Impossible de définir CCCD sur une caractéristique locale"

#: shared-bindings/_bleio/Adapter.c
msgid "Cannot create a new Adapter; use _bleio.adapter;"
msgstr ""
"Un nouveau Adapter ne peut être créé ; Adapter; utilisez _bleio.adapter;"

#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "Impossible de supprimer les valeurs"

#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "Ne peut être tiré ('pull') en mode 'output'"

#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr "Impossible de lire la température"

#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""
"Impossible d'avoir des réponses d'analyse pour les publicités étendues et "
"connectables."

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Cannot output both channels on the same pin"
msgstr "Les 2 canaux de sortie ne peuvent être sur la même broche"

#: shared-module/bitbangio/SPI.c
msgid "Cannot read without MISO pin."
msgstr "Impossible de lire sans broche MISO."

#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "Impossible d'enregistrer vers un fichier"

#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when USB is active."
msgstr "'/' ne peut être remonté quand l'USB est actif."

#: ports/atmel-samd/common-hal/microcontroller/__init__.c
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present."
msgstr ""
"Ne peut être redémarré vers le bootloader car il n'y a pas de bootloader."

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "Impossible d'affecter une valeur quand la direction est 'input'."

#: ports/esp32s2/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr "Impossible de spécifier RTS ou CTS en mode RS485"

#: py/objslice.c
msgid "Cannot subclass slice"
msgstr "On ne peut faire de sous-classes de tranches"

#: shared-module/bitbangio/SPI.c
msgid "Cannot transfer without MOSI and MISO pins."
msgstr "Pas de transfert sans broches MOSI et MISO."

#: extmod/moductypes.c
msgid "Cannot unambiguously get sizeof scalar"
msgstr "Impossible d'obtenir la taille du scalaire sans ambigüité"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
"Impossible de faire varier la fréquence sur une minuterie déjà utilisée"

#: shared-module/bitbangio/SPI.c
msgid "Cannot write without MOSI pin."
msgstr "Impossible d'écrire sans broche MOSI."

#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr "Ecriture sur 'CharacteristicBuffer' non fournie"

#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr "Le code principal de CircuitPython s'est écrasé durement. Oups !\n"

#: supervisor/shared/safe_mode.c
msgid ""
"CircuitPython is in safe mode because you pressed the reset button during "
"boot. Press again to exit safe mode.\n"
msgstr ""
"CircuitPython est en mode sans échec car vous avez appuyé sur le bouton de "
"réinitialisation pendant le démarrage. Appuyez à nouveau pour quitter le "
"mode sans échec.\n"

#: supervisor/shared/safe_mode.c
msgid "CircuitPython was unable to allocate the heap.\n"
msgstr "CircuitPython n'as pu faire l'allocation de la pile\n"

#: shared-module/bitbangio/SPI.c
msgid "Clock pin init failed."
msgstr "Echec de l'init. de la broche d'horloge."

#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr "Période de l'horloge trop longue"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Horloge en cours d'utilisation"

#: shared-bindings/_pew/PewPew.c
msgid "Column entry must be digitalio.DigitalInOut"
msgstr "L'entrée 'Column' doit être un digitalio.DigitalInOut"

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/displayio/ParallelBus.c
msgid "Command must be an int between 0 and 255"
msgstr "La commande doit être un entier entre 0 et 255"

#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
"La connexion a été déconnectée et ne peut plus être utilisée. Créez une "
"nouvelle connexion."

#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Fichier .mpy corrompu"

#: py/emitglue.c
msgid "Corrupt raw code"
msgstr "Code brut corrompu"

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Could not initialize Camera"
msgstr "Impossible d'initialisé la Camera"

#: ports/cxd56/common-hal/gnss/GNSS.c
msgid "Could not initialize GNSS"
msgstr "Impossible d'initialiser GNSS"

#: ports/cxd56/common-hal/sdioio/SDCard.c
msgid "Could not initialize SDCard"
msgstr "Impossible d'initialiser la carte SD"

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c
msgid "Could not initialize UART"
msgstr "L'UART n'a pu être initialisé"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not initialize channel"
msgstr "Impossible d'initialiser la chaîne"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not initialize timer"
msgstr "Impossible d'initialiser la minuterie"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not re-init channel"
msgstr "Impossible de réinitialiser la chaîne"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not re-init timer"
msgstr "Impossible de réinitialiser le minuteur"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not restart PWM"
msgstr "Impossible de redémarrer PWM"

#: ports/esp32s2/common-hal/neopixel_write/__init__.c
msgid "Could not retrieve clock"
msgstr "Impossible d’obtenir l’horloge"

#: shared-bindings/_bleio/Adapter.c
msgid "Could not set address"
msgstr "Impossible de définir l’adresse"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Could not start PWM"
msgstr "Impossible de démarrer PWM"

#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr "Impossible de démarrer l'interruption, RX occupé"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr "Impossible d'allouer le décodeur"

#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate first buffer"
msgstr "Impossible d'allouer le 1er tampon"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate input buffer"
msgstr "Impossible d'allouer le tampon d'entrée"

#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate second buffer"
msgstr "Impossible d'allouer le 2e tampon"

#: supervisor/shared/safe_mode.c
msgid "Crash into the HardFault_Handler."
msgstr "Crash dans le HardFault_Handler."

#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr "Erreur d'initialisation du canal DAC"

#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr "Erreur d'initialisation du périphérique DAC"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC déjà utilisé"

#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
msgid "Data 0 pin must be byte aligned"
msgstr "La broche 'Data 0' doit être aligné sur l'octet"

#: shared-module/audiocore/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr "Un bloc de données doit suivre un bloc de format"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data too large for advertisement packet"
msgstr "Données trop volumineuses pour un paquet de diffusion"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr "La capacité de destination est plus petite que 'destination_length'."

#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr "Appareil utilisé"

#: ports/cxd56/common-hal/digitalio/DigitalInOut.c
msgid "DigitalInOut not supported on given pin"
msgstr "DigitalInOut non pris en charge sur la broche donnée"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display must have a 16 bit colorspace."
msgstr "L'affichage doit avoir un espace colorimétrique de 16 bits."

#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display rotation must be in 90 degree increments"
msgstr "La rotation d'affichage doit se faire par incréments de 90 degrés"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr "Le mode Drive n'est pas utilisé quand la direction est 'input'."

#: shared-bindings/aesio/aes.c
msgid "ECB only operates on 16 bytes at a time"
msgstr "La BCE ne fonctionne que sur 16 octets à la fois"

#: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c
msgid "ESP-IDF memory allocation failed"
msgstr "ESP-IDF échec d'allocation de la mémoire"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr "Canal EXTINT déjà utilisé"

#: extmod/modure.c
msgid "Error in regex"
msgstr "Erreur dans l'expression régulière"

#: py/enum.c shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
#: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
#: shared-bindings/neopixel_write/__init__.c
#: shared-bindings/terminalio/Terminal.c
msgid "Expected a %q"
msgstr "Attendu un %q"

#: shared-bindings/_bleio/CharacteristicBuffer.c
#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
msgid "Expected a Characteristic"
msgstr "Une 'Characteristic' est attendue"

#: shared-bindings/_bleio/Adapter.c
msgid "Expected a DigitalInOut"
msgstr "Un 'DigitalInOut' est attendu"

#: shared-bindings/_bleio/Characteristic.c
msgid "Expected a Service"
msgstr "Attendu un service"

#: shared-bindings/_bleio/Adapter.c
msgid "Expected a UART"
msgstr "Un 'UART' est attendu"

#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
#: shared-bindings/_bleio/Service.c
msgid "Expected a UUID"
msgstr "Un UUID est attendu"

#: shared-bindings/_bleio/Adapter.c
msgid "Expected an Address"
msgstr "Attendu une adresse"

#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr ""

#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
msgstr "Tuple de longueur %d attendu, obtenu %d"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
msgstr ""
"Les publicités étendues avec réponse d'analyse ne sont pas prises en charge."

#: extmod/ulab/code/fft/fft.c
msgid "FFT is defined for ndarrays only"
msgstr "La FFT est définie pour les ndarrays uniquement"

#: extmod/ulab/code/fft/fft.c
msgid "FFT is implemented for linear arrays only"
msgstr "FFT n'est implémenté que pour les tableaux linéaires"

#: ports/esp32s2/common-hal/socketpool/Socket.c
msgid "Failed SSL handshake"
msgstr "Échec du handshake SSL"

#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr "Échec de l'envoi de la commande."

#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr "Echec de l'obtention de mutex, err 0x%04x"

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "Failed to allocate RX buffer"
msgstr "Echec de l'allocation du tampon RX"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr "Echec de l'allocation de %d octets du tampon RX"

#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Failed to allocate Wifi memory"
msgstr "Impossible d’allouer la mémoire pour Wifi"

#: ports/esp32s2/common-hal/wifi/ScannedNetworks.c
msgid "Failed to allocate wifi scan memory"
msgstr "Impossible d'allouer la mémoire pour le scan wifi"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: internal error"
msgstr "Impossible de se connecter : erreur interne"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: timeout"
msgstr "Impossible de se connecter : délai d'expiration"

#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Failed to init wifi"
msgstr "Echec de l'initialisation du Wifi"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Failed to parse MP3 file"
msgstr "Impossible d'analyser le fichier MP3"

#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr "Impossible de libérer mutex, err 0x%04x"

#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr "Échec de l'écriture du flash interne."

#: py/moduerrno.c
msgid "File exists"
msgstr "Le fichier existe"

#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/esp32s2/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "Filters too complex"
msgstr "Filtre trop complexe"

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Format not supported"
msgstr "Format non supporté"

#: shared-module/framebufferio/FramebufferDisplay.c
#, c-format
msgid "Framebuffer requires %d bytes"
msgstr "Le framebuffer nécessite %d octets"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "Frequency captured is above capability. Capture Paused."
msgstr "La fréquence capturée est au delà des capacités. Capture en pause."

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
"La fréquence doit correspondre à PWMOut existant à l'aide de cette minuterie"

#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr "La fonction nécessite un verrou"

#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr "Groupe déjà utilisé"

#: shared-module/displayio/Group.c
msgid "Group full"
msgstr "Groupe plein"

#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
#: ports/stm/common-hal/sdioio/SDCard.c
msgid "Hardware busy, try alternative pins"
msgstr "Matériel occupé, essayez d'autres broches"

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr "Matériel utilisé, essayez d'autres broches"

#: shared-bindings/wifi/Radio.c
msgid "Hostname must be between 1 and 253 characters"
msgstr "Hostname doit faire entre 1 et 253 caractères"

#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "opération d'E/S sur un fichier fermé"

#: ports/stm/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr "Erreur d'initialisation I2C"

#: shared-bindings/audiobusio/I2SOut.c
msgid "I2SOut not available"
msgstr "I2SOut n'est pas disponible"

#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "IOs 0, 2 & 4 do not support internal pullup in sleep"
msgstr ""

#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
msgstr "IV doit être long de %d octets"

#: py/persistentcode.c
msgid ""
"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
"mpy-update for more info."
msgstr ""
"Fichier .mpy incompatible. Merci de mettre à jour tous les fichiers .mpy."
"Voir http://adafru.it/mpy-update pour plus d'informations."

#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr "Taille de tampon incorrecte"

#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "L'initialisation a échoué par manque de mémoire"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "L'entrée prend trop de temps"

#: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c
msgid "Input/output error"
msgstr "Erreur d'entrée/sortie"

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr "Authentification insuffisante"

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr "Chiffrement insuffisant"

#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr "Erreur de définition interne"

#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr "Erreur interne #%d"

#: shared-bindings/sdioio/SDCard.c
msgid "Invalid %q"
msgstr "%q invalide"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid %q pin"
msgstr "Broche invalide pour '%q'"

#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c
#: ports/stm/common-hal/sdioio/SDCard.c
msgid "Invalid %q pin selection"
msgstr "Sélection de pin %q invalide"

#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr "Valeur d'unité ADC non valide"

#: shared-module/displayio/OnDiskBitmap.c
msgid "Invalid BMP file"
msgstr "Fichier BMP invalide"

#: shared-bindings/wifi/Radio.c
msgid "Invalid BSSID"
msgstr "BSSID Invalide"

#: ports/esp32s2/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "Invalid DAC pin supplied"
msgstr "Broche DAC non valide fournie"

#: ports/atmel-samd/common-hal/pwmio/PWMOut.c
#: ports/cxd56/common-hal/pwmio/PWMOut.c ports/nrf/common-hal/pwmio/PWMOut.c
#: shared-bindings/pwmio/PWMOut.c
msgid "Invalid PWM frequency"
msgstr "Fréquence de PWM invalide"

#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid argument"
msgstr "Argument invalide"

#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr "Bits par valeur invalides"

#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr "Longueur de tampon invalide"

#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "Invalid byteorder string"
msgstr "Chaîne d'octets non valide"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Période de capture invalide. Gamme valide : 1 à 500"

#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid channel count"
msgstr "Nombre de canaux invalide"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Invalid direction."
msgstr "Direction invalide."

#: shared-module/audiocore/WaveFile.c
msgid "Invalid file"
msgstr "Fichier invalide"

#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr "Taille de bloc de formatage invalide"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c
msgid "Invalid frequency"
msgstr "fréquence non Valide"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Invalid frequency supplied"
msgstr "Fréquence invalide fournie"

#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr "Accès mémoire invalide."

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid number of bits"
msgstr "Nombre de bits invalide"

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
#: shared-bindings/displayio/FourWire.c
msgid "Invalid phase"
msgstr "Phase invalide"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin"
msgstr "Broche invalide"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Invalid pin for left channel"
msgstr "Broche invalide pour le canal gauche"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Invalid pin for right channel"
msgstr "Broche invalide pour le canal droit"

#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/atmel-samd/common-hal/busio/SPI.c
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c
#: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
#: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c
#: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c
#: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
msgid "Invalid pins"
msgstr "Broches invalides"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "Invalid pins for PWMOut"
msgstr "Broches non valides pour PWMOut"

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
#: shared-bindings/displayio/FourWire.c
msgid "Invalid polarity"
msgstr "Polarité invalide"

#: shared-bindings/_bleio/Characteristic.c
msgid "Invalid properties"
msgstr "Propriétés non valides"

#: shared-bindings/microcontroller/__init__.c
msgid "Invalid run mode."
msgstr "Mode de lancement invalide."

#: shared-module/_bleio/Attribute.c
msgid "Invalid security_mode"
msgstr "'mode_security' non valide"

#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid voice"
msgstr "Voix invalide"

#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid voice count"
msgstr "Nombre de voix invalide"

#: shared-module/audiocore/WaveFile.c
msgid "Invalid wave file"
msgstr "Fichier WAVE invalide"

#: ports/stm/common-hal/busio/UART.c
msgid "Invalid word/bit length"
msgstr "Longueur de mot / bit non valide"

#: shared-bindings/aesio/aes.c
msgid "Key must be 16, 24, or 32 bytes long"
msgstr "La clé doit comporter 16, 24 ou 32 octets"

#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "La partie gauche de l'argument nommé doit être un identifiant"

#: shared-module/displayio/Group.c
msgid "Layer already in a group."
msgstr "Couche déjà dans un groupe."

#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass."
msgstr "'Layer' doit être un 'Group' ou une sous-classe 'TileGrid'."

#: py/objslice.c
msgid "Length must be an int"
msgstr "La longueur doit être un nombre entier"

#: py/objslice.c
msgid "Length must be non-negative"
msgstr "La longueur ne doit pas être négative"

#: shared-module/bitbangio/SPI.c
msgid "MISO pin init failed."
msgstr "Echec de l'init. de la broche MISO."

#: shared-module/bitbangio/SPI.c
msgid "MOSI pin init failed."
msgstr "Echec de l'init. de la broche MOSI."

#: shared-module/displayio/Shape.c
#, c-format
msgid "Maximum x value when mirrored is %d"
msgstr "La valeur max. de x est %d lors d'une opération miroir"

#: shared-bindings/canio/Message.c
msgid "Messages limited to 8 bytes"
msgstr "Message limité a 8 bytes"

#: supervisor/shared/safe_mode.c
msgid "MicroPython NLR jump failed. Likely memory corruption."
msgstr "Le saut MicroPython NLR a échoué. Altération probable de la mémoire."

#: supervisor/shared/safe_mode.c
msgid "MicroPython fatal error."
msgstr "Erreur fatale MicroPython."

#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr "Le délais au démarrage du micro doit être entre 0.0 et 1.0"

#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr "Broche MISO ou MOSI manquante"

#: shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr "Doit être une sous-classe de %q."

#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr "Doit fournir une broche MISO ou MOSI"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Doit utiliser un multiple de 6 broches RVB, pas %d"

#: ports/esp32s2/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""

#: py/parse.c
msgid "Name too long"
msgstr "Nom trop long"

#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "No CCCD for this Characteristic"
msgstr "Pas de CCCD pour cette caractéristique"

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "Pas de DAC sur la puce"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "No DMA channel found"
msgstr "Aucun canal DMA trouvé"

#: shared-module/busdevice/I2CDevice.c
#, c-format
msgid "No I2C device at address: %x"
msgstr ""

#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr "Pas de broche MISO"

#: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr "Pas de broche MOSI"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Pas de broche RX"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Pas de broche TX"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr "Pas d'horloge disponible"

#: shared-bindings/_bleio/PacketBuffer.c
msgid "No connection: length cannot be determined"
msgstr "Pas de connexion : la longueur ne peut pas être déterminée"

#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr "Pas de bus %q par défaut"

#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr "Pas de GCLK libre"

#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr "Pas de source matérielle d'aléa disponible"

#: ports/atmel-samd/common-hal/ps2io/Ps2.c
msgid "No hardware support on clk pin"
msgstr "Pas de support matériel sur la broche clk"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "No hardware support on pin"
msgstr "Pas de support matériel pour cette broche"

#: shared-bindings/aesio/aes.c
msgid "No key was specified"
msgstr "Aucune clé n'a été spécifiée"

#: shared-bindings/time/__init__.c
msgid "No long integer support"
msgstr "Pas de support entier long"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c
msgid "No more channels available"
msgstr "Pas de canal supplémentaire disponible"

#: ports/esp32s2/common-hal/pwmio/PWMOut.c
msgid "No more timers available"
msgstr "Pas d'horloge supplémentaire disponible"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "No more timers available on this pin."
msgstr "Plus de minuteurs disponibles sur cette broche."

#: shared-bindings/wifi/Radio.c
msgid "No network with that ssid"
msgstr "Aucun réseau avec ce ssid"

#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr "Pas de pulldown sur la broche ; 1Mohm recommandé"

#: py/moduerrno.c
msgid "No space left on device"
msgstr "Il n'y a plus d'espace libre sur le périphérique"

#: py/moduerrno.c
msgid "No such file/directory"
msgstr "Fichier/dossier introuvable"

#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr "Pas de minuterie disponible"

#: supervisor/shared/safe_mode.c
msgid "Nordic Soft Device failure assertion."
msgstr "Affirmation de défaillance du Nordic Soft Device."

#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
msgid "Not a valid IP string"
msgstr "Chaîne IP non valide"

#: ports/nrf/common-hal/_bleio/__init__.c
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "Not connected"
msgstr "Non connecté"

#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
#: shared-bindings/audiopwmio/PWMAudioOut.c
msgid "Not playing"
msgstr "Ne joue pas"

#: main.c
msgid "Not running saved code.\n"
msgstr "N'exécute pas le code sauvegardé.\n"

#: shared-bindings/_bleio/__init__.c
msgid "Not settable"
msgstr "Non réglable"

#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
"L'objet a été désinitialisé et ne peut plus être utilisé. Créez un nouvel "
"objet."

#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr "Parité impaire non supportée"

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Only 8 or 16 bit mono with "
msgstr "Uniquement 8 ou 16 bit mono avec "

#: ports/esp32s2/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Seules les adresses IPv4 sont prises en charge"

#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Only IPv4 sockets supported"
msgstr ""

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""
"Seul le format BMP Windows, non compressé est supporté : la taille de "
"l'entête fournie est %d"

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
msgstr ""
"Prise en charge uniquement des monochromes, 4 bpp ou 8 bpp indexés et 16 bpp "
"ou plus : %d bpp fournis"

#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "Only one alarm.time alarm can be set."
msgstr ""

#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr "Une seule couleur peut être transparente à la fois"

#: shared-bindings/ipaddress/__init__.c
msgid "Only raw int supported for ip"
msgstr "IP n'accepte que les entiers bruts"

#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "Out of sockets"
msgstr "Plus de sockets"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr "Le sur-échantillonage doit être un multiple de 8."

#: shared-bindings/pwmio/PWMOut.c
msgid ""
"PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
msgstr ""
"La valeur de cycle PWM doit être entre 0 et 65535 inclus (résolution de 16 "
"bits)"

#: shared-bindings/pwmio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""
"La fréquence de PWM n'est pas modifiable quand variable_frequency est False "
"à la construction."

#: ports/esp32s2/common-hal/displayio/ParallelBus.c
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
#: ports/stm/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr "ParallelBus pas encore pris en charge"

#: py/moduerrno.c
msgid "Permission denied"
msgstr "Permission refusée"

#: ports/atmel-samd/common-hal/analogio/AnalogIn.c
#: ports/cxd56/common-hal/analogio/AnalogIn.c
#: ports/esp32s2/common-hal/analogio/AnalogIn.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr "La broche ne peut être utilisée pour l'ADC"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pin is input only"
msgstr "La broche est entrée uniquement"

#: ports/atmel-samd/common-hal/countio/Counter.c
msgid "Pin must support hardware interrupts"
msgstr "La broche doit prendre en charge les interruptions matérielles"

#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin number already reserved by EXTI"
msgstr "Numéro de broche déjà réservé par EXTI"

#: ports/esp32s2/common-hal/alarm/__init__.c
msgid "PinAlarm not yet implemented"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
"Le brochage utilise %d octets par élément, ce qui consomme plus que le %d "
"octets idéal. Si cela ne peut pas être évité, transmettez allow_inefficient "
"= True au constructeur"

#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr "Ainsi que tout autre module présent sur le système de fichiers\n"

#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr "Polygone a besoin d’au moins 3 points"

#: ports/esp32s2/common-hal/pulseio/PulseOut.c
msgid ""
"Port does not accept PWM carrier. Pass a pin, frequency and duty cycle "
"instead"
msgstr ""
"Ce portage n'accepte pas de PWM carrier. Précisez plutôt pin, frequency et "
"duty cycle"

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/pulseio/PulseOut.c
#: ports/stm/common-hal/pulseio/PulseOut.c
msgid ""
"Port does not accept pins or frequency. Construct and pass a PWMOut Carrier "
"instead"
msgstr ""
"Ce portage n'accepte pas pins ou frequency. Construisez et passez un PWMOut "
"Carrier à la place"

#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr "Le tampon de préfixe doit être sur le tas"

#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload."
msgstr "Appuyez sur une touche pour entrer sur REPL ou CTRL-D pour recharger."

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr "Le tirage 'pull' n'est pas utilisé quand la direction est 'output'."

#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr "Erreur RNG DeInit"

#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr "Erreur d'initialisation RNG"

#: ports/esp32s2/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr "Inversion RS485 spécifiée lorsqu'elle n'est pas en mode RS485"

#: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c
#: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c
msgid "RTC calibration is not supported on this board"
msgstr "étalonnage de la RTC non supportée sur cette carte"

#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC non supportée sur cette carte"

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RTS/CTS/RS485 Not yet supported on this device"
msgstr "RTS / CTS / RS485 Pas encore pris en charge sur cet appareil"

#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr "Erreur de génération de nombres aléatoires"

#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr "Lecture seule"

#: extmod/vfs_fat.c py/moduerrno.c
msgid "Read-only filesystem"
msgstr "Système de fichier en lecture seule"

#: shared-module/displayio/Bitmap.c
msgid "Read-only object"
msgstr "Objet en lecture seule"

#: shared-bindings/displayio/EPaperDisplay.c
msgid "Refresh too soon"
msgstr "Rafraîchissez trop tôt"

#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
msgstr "RemoteTransmissionRequests limité à 8 octets"

#: shared-bindings/aesio/aes.c
msgid "Requested AES mode is unsupported"
msgstr "Le mode AES demandé n'est pas pris en charge"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr "Canal droit non supporté"

#: shared-bindings/_pew/PewPew.c
msgid "Row entry must be digitalio.DigitalInOut"
msgstr "L'entrée de ligne 'Row' doit être un digitalio.DigitalInOut"

#: main.c
msgid "Running in safe mode! "
msgstr "Tourne en mode sécurisé "

#: shared-module/sdcardio/SDCard.c
msgid "SD card CSD format not supported"
msgstr "Le format de carte SD CSD n'est pas pris en charge"

#: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "SDA or SCL needs a pull up"
msgstr "SDA ou SCL a besoin d'une résistance de tirage ('pull up')"

#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO GetCardInfo Error %d"
msgstr "SDIO GetCardInfo erreur %d"

#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO Init Error %d"
msgstr "SDIO Init erreur %d"

#: ports/stm/common-hal/busio/SPI.c
msgid "SPI Init Error"
msgstr "Erreur d'initialisation SPI"

#: ports/stm/common-hal/busio/SPI.c
msgid "SPI Re-initialization error"
msgstr "Erreur de réinitialisation SPI"

#: shared-bindings/audiomixer/Mixer.c
msgid "Sample rate must be positive"
msgstr "Le taux d'échantillonage doit être positif"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#, c-format
msgid "Sample rate too high. It must be less than %d"
msgstr "Taux d'échantillonage trop élevé. Doit être inf. à %d"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progess. Stop with stop_scan."
msgstr "Scan déjà en cours. Arrêtez avec stop_scan."

#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected CTS pin not valid"
msgstr "Broche CTS sélectionnée non valide"

#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected RTS pin not valid"
msgstr "Broche RTS sélectionnée non valide"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr "Sérialiseur en cours d'utilisation"

#: shared-bindings/ssl/SSLContext.c
msgid "Server side context cannot have hostname"
msgstr "Un contexte niveau serveur ne peut avoir de hostname"

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Size not supported"
msgstr "Taille non prise en charge"

#: shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr "Tranche et valeur de tailles différentes."

#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/TileGrid.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr "Tranches non supportées"

#: ports/esp32s2/common-hal/socketpool/SocketPool.c
msgid "SocketPool can only be used with wifi.radio"
msgstr "SocketPool ne s'utilise qu'avec wifi.radio"

#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr "Les tampons source et de destination doivent être de la même longueur"

#: extmod/modure.c
msgid "Splitting with sub-captures"
msgstr "Fractionnement avec des sous-captures"

#: shared-bindings/supervisor/__init__.c
msgid "Stack size must be at least 256"
msgstr "La pile doit être au moins de 256"

#: shared-bindings/multiterminal/__init__.c
msgid "Stream missing readinto() or write() method."
msgstr "Il manque une méthode readinto() ou write() au flux."

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr "Fournissez au moins une broche UART"

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""

#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr "L'entrée du système doit être gnss.SatelliteSystem"

#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr "Temporisation de lecture dépassée"

#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Please increase the stack size if you know how, or if not:"
msgstr ""
"Le tas CircuitPython a été corrompu car la pile était trop petite.\n"
"Veuillez augmenter la taille de la pile si vous savez comment, ou sinon :"

#: supervisor/shared/safe_mode.c
msgid ""
"The `microcontroller` module was used to boot into safe mode. Press reset to "
"exit safe mode.\n"
msgstr ""
"Le module `microcontrôleur` a été utilisé pour démarrer en mode sans échec. "
"Appuyez sur reset pour quitter le mode sans échec.\n"

#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr "La taille de rgb_pins doit être 6, 12, 18, 24 ou 30"

#: supervisor/shared/safe_mode.c
msgid ""
"The microcontroller's power dipped. Make sure your power supply provides\n"
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY).\n"
msgstr ""
"La puissance du microcontrôleur a baissé. Assurez-vous que votre "
"alimentation\n"
"assez de puissance pour tout le circuit et appuyez sur reset (après avoir "
"éjecté CIRCUITPY).\n"

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr ""
"Le 'bits_per_sample' de l'échantillon ne correspond pas à celui du mixer"

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's channel count does not match the mixer's"
msgstr "Le canal de l'échantillon ne correspond pas à celui du mixer"

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's sample rate does not match the mixer's"
msgstr "L'échantillonage de l'échantillon ne correspond pas à celui du mixer"

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's signedness does not match the mixer's"
msgstr "Le signe de l'échantillon ne correspond pas à celui du mixer"

#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr "La hauteur de la tuile doit diviser exactement la hauteur de l'image"

#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
msgid "Tile index out of bounds"
msgstr "Index des tuiles hors limites"

#: shared-bindings/displayio/TileGrid.c
msgid "Tile value out of bounds"
msgstr "Valeur de tuile hors limites"

#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr "La largeur de la tuile doit diviser exactement la largeur de l'image"

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""

#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
msgstr "Le délai est trop long : le délai maximal est de %d secondes"

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid ""
"Timer was reserved for internal use - declare PWM pins earlier in the program"
msgstr ""
"Timer est reservé pour un usage interne - déclarez la broche PWM plus tôt "
"dans le programme"

#: supervisor/shared/safe_mode.c
msgid "To exit, please reset the board without "
msgstr "Pour quitter, redémarrez la carte SVP sans "

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr "Trop de canaux dans l'échantillon."

#: shared-module/displayio/__init__.c
msgid "Too many display busses"
msgstr "Trop de bus d'affichage"

#: shared-module/displayio/__init__.c
msgid "Too many displays"
msgstr "Trop d'affichages"

#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Total data to write is larger than outgoing_packet_length"
msgstr ""
"Le nombre total de données à écrire est supérieur à outgoing_packet_length"

#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr "Trace (appels les plus récents en dernier) :\n"

#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr "Argument de type tuple ou struct_time nécessaire"

#: ports/stm/common-hal/busio/UART.c
msgid "UART Buffer allocation error"
msgstr "Erreur d'allocation de tampon UART"

#: ports/stm/common-hal/busio/UART.c
msgid "UART De-init error"
msgstr "Erreur de désactivation UART"

#: ports/stm/common-hal/busio/UART.c
msgid "UART Init Error"
msgstr "Erreur d'initialisation UART"

#: ports/stm/common-hal/busio/UART.c
msgid "UART Re-init error"
msgstr "Erreur de réinitialisation UART"

#: ports/stm/common-hal/busio/UART.c
msgid "UART write error"
msgstr "Erreur d'écriture UART"

#: shared-module/usb_hid/Device.c
msgid "USB Busy"
msgstr "USB occupé"

#: shared-module/usb_hid/Device.c
msgid "USB Error"
msgstr "Erreur USB"

#: shared-bindings/_bleio/UUID.c
msgid "UUID integer value must be 0-0xffff"
msgstr "La valeur entière UUID doit être 0-0xffff"

#: shared-bindings/_bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""
"La chaîne UUID n'est pas au format 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"

#: shared-bindings/_bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr ""
"la valeur de l'UUID n'est pas une chaîne de caractères, un entier ou un "
"tampon d'octets"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr "Impossible d'allouer des tampons pour une conversion signée"

#: ports/esp32s2/common-hal/busio/I2C.c
msgid "Unable to create lock"
msgstr "Impossible de créer un verrou"

#: shared-module/displayio/I2CDisplay.c
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr "Impossible de trouver l'affichage I2C à %x"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr "Impossible de trouver un GCLK libre"

#: py/parse.c
msgid "Unable to init parser"
msgstr "Impossible d'initialiser le parser"

#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr "Impossible de lire les données de la palette de couleurs"

#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr "Impossible d'écrire sur la mémoire non-volatile."

#: ports/nrf/common-hal/_bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr "Type inattendu pour l'uuid nrfx"

#: ports/esp32s2/common-hal/socketpool/Socket.c
#, c-format
msgid "Unhandled ESP TLS error %d %d %x %d"
msgstr "Erreur ESP TLS non gérée %d %d %x %d"

#: shared-bindings/wifi/Radio.c
msgid "Unknown failure"
msgstr "Echec inconnu"

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr "Erreur gatt inconnue : 0x%04x"

#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr "Raison inconnue."

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr "Erreur de sécurité inconnue : 0x%04x"

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown soft device error: %04x"
msgstr "Erreur de périphérique logiciel inconnue : %04x"

#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""
"Pas de correspondance du nombres d'éléments à droite (attendu %d, obtenu %d)."

#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""
"Problème non spécifié. Il se peut que l'invite d'association sur l'autre "
"appareil ait été refusée ou ignorée."

#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
#: ports/esp32s2/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
msgid "Unsupported baudrate"
msgstr "Débit non supporté"

#: shared-module/displayio/display_core.c
msgid "Unsupported display bus type"
msgstr "Type de bus d'affichage non supporté"

#: shared-module/audiocore/WaveFile.c
msgid "Unsupported format"
msgstr "Format non supporté"

#: py/moduerrno.c
msgid "Unsupported operation"
msgstr "Opération non supportée"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Unsupported pull value."
msgstr "Valeur de tirage 'pull' non supportée."

#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length != required fixed length"
msgstr "Longueur de valeur != Longueur fixe requise"

#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length > max_length"
msgstr "Longueur de la valeur > max_length"

#: py/emitnative.c
msgid "Viper functions don't currently support more than 4 arguments"
msgstr ""
"les fonctions de Viper ne supportent pas plus de 4 arguments actuellement"

#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr "La lecture de la tension a expiré"

#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr "ATTENTION : le nom de fichier de votre code a deux extensions\n"

#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
"WatchDogTimer ne peut pas être désinitialisé une fois que le mode est réglé "
"sur RESET"

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer is not currently running"
msgstr "WatchDogTimer n'est pas en cours d'exécution"

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
msgstr ""
"WatchDogTimer.mode ne peut pas être changé une fois réglé pour WatchDogMode."
"RESET"

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.timeout must be greater than 0"
msgstr "WatchDogTimer.timeout doit être supérieur à 0"

#: supervisor/shared/safe_mode.c
msgid "Watchdog timer expired."
msgstr "Le minuteur Watchdog a expiré."

#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Please visit learn.adafruit.com/category/circuitpython for project guides.\n"
"\n"
"To list built-in modules please do `help(\"modules\")`.\n"
msgstr ""
"Bienvenue sur Adafruit CircuitPython %s !\n"
"\n"
"Visitez learn.adafruit.com/category/circuitpython pour les guides.\n"
"\n"
"Pour lister les modules inclus, tapez `help(\"modules\")`.\n"

#: shared-bindings/wifi/Radio.c
msgid "WiFi password must be between 8 and 63 characters"
msgstr "Le mot de passe WiFi doit faire entre 8 et 63 caractères"

#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr "Écritures non prises en charge sur la caractéristique"

#: supervisor/shared/safe_mode.c
msgid "You are in safe mode: something unanticipated happened.\n"
msgstr "Vous êtes en mode sans échec : quelque chose d'imprévu s'est passé.\n"

#: supervisor/shared/safe_mode.c
msgid "You requested starting safe mode by "
msgstr "Vous avez demandé à démarrer en mode sans-échec par "

#: py/objtype.c
msgid "__init__() should return None"
msgstr "__init__() doit retourner None"

#: py/objtype.c
msgid "__init__() should return None, not '%q'"
msgstr "__init__() doit retourner None, pas '%q'"

#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr "l'argument __new__ doit être d'un type défini par l'utilisateur"

#: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c
msgid "a bytes-like object is required"
msgstr "un objet 'bytes-like' est requis"

#: lib/embed/abort_.c
msgid "abort() called"
msgstr "abort() appelé"

#: extmod/machine_mem.c
#, c-format
msgid "address %08x is not aligned to %d bytes"
msgstr "l'adresse %08x n'est pas alignée sur %d octets"

#: shared-bindings/i2cperipheral/I2CPeripheral.c
msgid "address out of bounds"
msgstr "adresse hors limites"

#: shared-bindings/i2cperipheral/I2CPeripheral.c
msgid "addresses is empty"
msgstr "adresses vides"

#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "l'argument est une séquence vide"

#: extmod/ulab/code/numerical/numerical.c
msgid "argsort argument must be an ndarray"
msgstr "L'argument argsort doit être un ndarray"

#: extmod/ulab/code/numerical/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr "argsort n'est pas mis en œuvre pour les tableaux aplatis"

#: py/runtime.c
msgid "argument has wrong type"
msgstr "l'argument est d'un mauvais type"

#: extmod/ulab/code/linalg/linalg.c
msgid "argument must be ndarray"
msgstr "l'argument doit être un ndarray"

#: py/argcheck.c shared-bindings/_stage/__init__.c
#: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c
msgid "argument num/types mismatch"
msgstr "argument num/types ne correspond pas"

#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr "l'argument devrait être un(e) '%q', pas '%q'"

#: extmod/ulab/code/linalg/linalg.c extmod/ulab/code/numerical/numerical.c
msgid "arguments must be ndarrays"
msgstr "les arguments doivent être des ndarrays"

#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr "la longueur du tableau et de l'index doit être égale"

#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "tableau/octets requis à droite"

#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr "tentative d’obtenir (arg)min/(arg)max d'une séquence vide"

#: extmod/ulab/code/numerical/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr "tenter d'obtenir argmin / argmax d'une séquence vide"

#: py/objstr.c
msgid "attributes not supported yet"
msgstr "attribut pas encore supporté"

#: extmod/ulab/code/numerical/numerical.c
msgid "axis is out of bounds"
msgstr "axis est hors limites"

#: extmod/ulab/code/numerical/numerical.c
msgid "axis must be None, or an integer"
msgstr "axis doit être None ou un entier"

#: extmod/ulab/code/numerical/numerical.c
msgid "axis too long"
msgstr "axis trop long"

#: py/builtinevex.c
msgid "bad compile mode"
msgstr "mauvais mode de compilation"

#: py/objstr.c
msgid "bad conversion specifier"
msgstr "mauvaise spécification de conversion"

#: py/objstr.c
msgid "bad format string"
msgstr "chaîne mal-formée"

#: py/binary.c py/objarray.c
msgid "bad typecode"
msgstr "mauvais code type"

#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr "opération binaire '%q' non implémentée"

#: shared-bindings/busio/UART.c
msgid "bits must be 7, 8 or 9"
msgstr "bits doivent être 7, 8 ou 9"

#: shared-bindings/audiomixer/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr "'bits_per_sample' doivent être 8 ou 16"

#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr "branche hors-bornes"

#: shared-bindings/audiocore/RawSample.c
msgid "buffer must be a bytes-like object"
msgstr "le tampon doit être un objet bytes-like"

#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr "la taille du tampon doit correspondre au format"

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr "les tranches de tampon doivent être de longueurs égales"

#: py/modstruct.c shared-bindings/struct/__init__.c
#: shared-module/struct/__init__.c
msgid "buffer too small"
msgstr "tampon trop petit"

#: shared-bindings/socketpool/Socket.c
msgid "buffer too small for requested bytes"
msgstr "tampon trop petit pour le nombre d'octets demandé"

#: shared-bindings/_pew/PewPew.c
msgid "buttons must be digitalio.DigitalInOut"
msgstr "les boutons doivent être des digitalio.DigitalInOut"

#: py/vm.c
msgid "byte code not implemented"
msgstr "bytecode non implémenté"

#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "byteorder is not a string"
msgstr "byteorder n'est pas une chaîne"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c
msgid "bytes > 8 bits not supported"
msgstr "octets > 8 bits non supporté"

#: py/objarray.c
msgid "bytes length not a multiple of item size"
msgstr "bytes length n'est pas un multiple de la taille d'un élément"

#: py/objstr.c
msgid "bytes value out of range"
msgstr "valeur des octets hors bornes"

#: ports/atmel-samd/bindings/samd/Clock.c ports/atmel-samd/common-hal/rtc/RTC.c
msgid "calibration is out of range"
msgstr "étalonnage hors bornes"

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr "étalonnage en lecture seule"

#: ports/atmel-samd/common-hal/rtc/RTC.c
msgid "calibration value out of range +/-127"
msgstr "valeur de étalonnage hors bornes +/-127"

#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr "il peut y avoir jusqu'à 4 paramètres pour l'assemblage Thumb"

#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "maximum 4 paramètres pour l'assembleur Xtensa"

#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "ne peut sauvegarder que du bytecode"

#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr ""
"impossible d'ajouter une méthode spéciale à une classe déjà sous-classée"

#: py/compile.c
msgid "can't assign to expression"
msgstr "ne peut pas assigner à une expression"

#: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c
#: shared-module/_pixelbuf/PixelBuf.c
msgid "can't convert %q to %q"
msgstr "impossible de convertir %q en %q"

#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr "impossible de convertir l'objet '%q' en '%q' implicitement"

#: py/obj.c
msgid "can't convert to %q"
msgstr "impossible de convertir en %q"

#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr "impossible de convertir en chaine 'str' implicitement"

#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr "ne peut déclarer de 'nonlocal' dans un code externe"

#: py/compile.c
msgid "can't delete expression"
msgstr "ne peut pas supprimer l'expression"

#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr "opération binaire impossible entre '%q' et '%q'"

#: py/objcomplex.c
msgid "can't do truncated division of a complex number"
msgstr "on ne peut pas faire de division tronquée de nombres complexes"

#: py/compile.c
msgid "can't have multiple **x"
msgstr "il ne peut y avoir de **x multiples"

#: py/compile.c
msgid "can't have multiple *x"
msgstr "il ne peut y avoir de *x multiples"

#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr "impossible de convertir implicitement '%q' en 'bool'"

#: py/emitnative.c
msgid "can't load from '%q'"
msgstr "impossible de charger depuis '%q'"

#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr "impossible de charger avec l'indice '%q'"

#: py/objgenerator.c
msgid "can't pend throw to just-started generator"
msgstr ""
"on ne peut effectuer une action de type 'pend throw' sur un générateur "
"fraîchement démarré"

#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""
"on ne peut envoyer une valeur autre que 'None' à un générateur fraîchement "
"démarré"

#: shared-module/sdcardio/SDCard.c
msgid "can't set 512 block size"
msgstr "impossible de définir une taille de bloc de 512"

#: py/objnamedtuple.c
msgid "can't set attribute"
msgstr "attribut non modifiable"

#: py/emitnative.c
msgid "can't store '%q'"
msgstr "impossible de stocker '%q'"

#: py/emitnative.c
msgid "can't store to '%q'"
msgstr "impossible de stocker vers '%q'"

#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr "impossible de stocker avec un indice '%q'"

#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""
"impossible de passer d'une énumération auto des champs à une spécification "
"manuelle"

#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
"impossible de passer d'une spécification manuelle des champs à une "
"énumération auto"

#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""

#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "ne peut pas créer une instance de '%q'"

#: py/objtype.c
msgid "cannot create instance"
msgstr "ne peut pas créer une instance"

#: py/runtime.c
msgid "cannot import name %q"
msgstr "ne peut pas importer le nom %q"

#: py/builtinimport.c
msgid "cannot perform relative import"
msgstr "ne peut pas réaliser un import relatif"

#: py/emitnative.c
msgid "casting"
msgstr "typage"

#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr "tampon de caractères trop petit"

#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr "argument de chr() hors de la gamme range(0x11000)"

#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr "argument de chr() hors de la gamme range(256)"

#: shared-module/vectorio/Circle.c
msgid "circle can only be registered in one parent"
msgstr "le cercle ne peut être enregistré que dans un seul parent"

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr "le tampon de couleur doit faire 3 octets (RVB) ou 4 (RVB + pad byte)"

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer, tuple, list, or int"
msgstr ""
"le tampon de couleur doit être un tampon, un tuple, une liste ou un entier"

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr ""
"le tampon de couleur doit être un bytearray ou un tableau de type 'b' ou 'B'"

#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr "la couleur doit être entre 0x000000 et 0xffffff"

#: shared-bindings/displayio/ColorConverter.c
msgid "color should be an int"
msgstr "la couleur doit être un entier 'int'"

#: py/objcomplex.c
msgid "complex division by zero"
msgstr "division complexe par zéro"

#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr "valeurs complexes non supportées"

#: extmod/moduzlib.c
msgid "compression header"
msgstr "entête de compression"

#: py/parse.c
msgid "constant must be an integer"
msgstr "constante doit être un entier"

#: py/emitnative.c
msgid "conversion to object"
msgstr "conversion en objet"

#: extmod/ulab/code/filter/filter.c
msgid "convolve arguments must be linear arrays"
msgstr "les arguments convolve doivent être des tableaux linéaires"

#: extmod/ulab/code/filter/filter.c
msgid "convolve arguments must be ndarrays"
msgstr "les arguments convolve doivent être des ndarrays"

#: extmod/ulab/code/filter/filter.c
msgid "convolve arguments must not be empty"
msgstr "les arguments convolve ne doivent pas être vides"

#: extmod/ulab/code/poly/poly.c
msgid "could not invert Vandermonde matrix"
msgstr "n'a pas pu inverser la matrice Vandermonde"

#: shared-module/sdcardio/SDCard.c
msgid "couldn't determine SD card version"
msgstr "impossible de déterminer la version de la carte SD"

#: extmod/ulab/code/numerical/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr "cross est défini pour les tableaux 1D de longueur 3"

#: extmod/ulab/code/approx/approx.c
msgid "data must be iterable"
msgstr "les données doivent être les objets iterables"

#: extmod/ulab/code/approx/approx.c
msgid "data must be of equal length"
msgstr "les données doivent être de longueur égale"

#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "nombres décimaux non supportés"

#: py/compile.c
msgid "default 'except' must be last"
msgstr "l''except' par défaut doit être en dernier"

#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""
"le tampon de destination doit être un tableau de type 'B' pour bit_depth = 8"

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr ""
"le tampon de destination doit être un tableau de type 'H' pour bit_depth = 16"

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination_length must be an int >= 0"
msgstr "destination_length doit être un entier >= 0"

#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr "la séquence de mise à jour de dict a une mauvaise longueur"

#: extmod/ulab/code/numerical/numerical.c
msgid "diff argument must be an ndarray"
msgstr "l'argument diff doit être un ndarray"

#: extmod/ulab/code/numerical/numerical.c
msgid "differentiation order out of range"
msgstr "differentiation order hors plage"

#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
msgstr "division par zéro"

#: py/objdeque.c
msgid "empty"
msgstr "vide"

#: extmod/moduheapq.c extmod/modutimeq.c
msgid "empty heap"
msgstr "tas vide"

#: py/objstr.c
msgid "empty separator"
msgstr "séparateur vide"

#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr "séquence vide"

#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr "fin de format en cherchant une spécification de conversion"

#: shared-bindings/displayio/Shape.c
msgid "end_x should be an int"
msgstr "end_x doit être un entier 'int'"

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""

#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr "erreur = 0x%08lX"

#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr "les exceptions doivent dériver de 'BaseException'"

#: shared-bindings/canio/CAN.c
msgid "expected '%q' but got '%q'"
msgstr "'%q' était attendu, mais reçu '%q'"

#: shared-bindings/canio/CAN.c
msgid "expected '%q' or '%q' but got '%q'"
msgstr "'%q' ou '%q' était attendu, mais reçu '%q'"

#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr "':' attendu après la spécification de format"

#: py/obj.c
msgid "expected tuple/list"
msgstr "un tuple ou une liste est attendu"

#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr "un dict est attendu pour les arguments nommés"

#: py/compile.c
msgid "expecting an assembler instruction"
msgstr "une instruction assembleur est attendue"

#: py/compile.c
msgid "expecting just a value for set"
msgstr "une simple valeur est attendue pour l'ensemble 'set'"

#: py/compile.c
msgid "expecting key:value for dict"
msgstr "couple clef:valeur attendu pour un dictionnaire 'dict'"

#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr "argument(s) nommé(s) supplémentaire(s) donné(s)"

#: py/argcheck.c
msgid "extra positional arguments given"
msgstr "argument(s) positionnel(s) supplémentaire(s) donné(s)"

#: py/parse.c
msgid "f-string expression part cannot include a '#'"
msgstr "La partie d'expression de chaîne f ne peut pas inclure de '#'"

#: py/parse.c
msgid "f-string expression part cannot include a backslash"
msgstr ""
"La partie d'expression de chaîne f ne peut pas inclure de barre oblique "
"inverse"

#: py/parse.c
msgid "f-string: empty expression not allowed"
msgstr "f-string : expression vide non autorisée"

#: py/parse.c
msgid "f-string: expecting '}'"
msgstr "f-string : attend '}'"

#: py/parse.c
msgid "f-string: single '}' is not allowed"
msgstr "f-string : single '}' n'est pas autorisé"

#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
#: shared-bindings/displayio/OnDiskBitmap.c
msgid "file must be a file opened in byte mode"
msgstr "le fichier doit être un fichier ouvert en mode 'byte'"

#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr "le system de fichier doit fournir une méthode 'mount'"

#: extmod/ulab/code/vector/vectorise.c
msgid "first argument must be a callable"
msgstr "le premier argument doit être un appelable"

#: extmod/ulab/code/approx/approx.c
msgid "first argument must be a function"
msgstr "le premier argument doit être une fonction"

#: extmod/ulab/code/ulab_create.c
msgid "first argument must be a tuple of ndarrays"
msgstr "le premier argument doit être un tuple de ndarrays"

#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr "le premier argument doit être un itérable"

#: extmod/ulab/code/vector/vectorise.c
msgid "first argument must be an ndarray"
msgstr "le premier argument doit être un ndarray"

#: py/objtype.c
msgid "first argument to super() must be type"
msgstr "le premier argument de super() doit être un type"

#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr "l'ordre d'aplatissement doit être «C» ou «F»"

#: extmod/ulab/code/numerical/numerical.c
msgid "flip argument must be an ndarray"
msgstr "l'argument flip doit être un ndarray"

#: py/objint.c
msgid "float too big"
msgstr "nombre à virgule flottante trop grand"

#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr "la police doit être longue de 2048 octets"

#: py/objstr.c
msgid "format requires a dict"
msgstr "le format nécessite un dict"

#: py/objdeque.c
msgid "full"
msgstr "plein"

#: py/argcheck.c
msgid "function does not take keyword arguments"
msgstr "la fonction ne prend pas d'arguments nommés"

#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr "la fonction attendait au plus %d arguments, reçu %d"

#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr "la fonction a reçu plusieurs valeurs pour l'argument '%q'"

#: extmod/ulab/code/approx/approx.c
msgid "function has the same sign at the ends of interval"
msgstr "la fonction a le même signe aux extrémités de l’intervalle"

#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr "La fonction n'est définie que pour les ndarrays"

#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr "il manque %d arguments obligatoires à la fonction"

#: py/bc.c
msgid "function missing keyword-only argument"
msgstr "il manque un argument nommé obligatoire"

#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr "il manque l'argument nommé obligatoire '%q'"

#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr "il manque l'argument positionnel obligatoire #%d"

#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr "la fonction prend %d argument(s) positionnels mais %d ont été donné(s)"

#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr "la fonction prend exactement 9 arguments"

#: py/objgenerator.c
msgid "generator already executing"
msgstr "générateur déjà en cours d'exécution"

#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr "le générateur a ignoré GeneratorExit"

#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr "graphic doit être long de 2048 octets"

#: extmod/moduheapq.c
msgid "heap must be a list"
msgstr "le tas doit être une liste"

#: py/compile.c
msgid "identifier redefined as global"
msgstr "identifiant redéfini comme global"

#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr "identifiant redéfini comme nonlocal"

#: py/objstr.c
msgid "incomplete format"
msgstr "format incomplet"

#: py/objstr.c
msgid "incomplete format key"
msgstr "clé de format incomplète"

#: extmod/modubinascii.c
msgid "incorrect padding"
msgstr "espacement incorrect"

#: extmod/ulab/code/ndarray.c
msgid "index is out of bounds"
msgstr "l'index est hors limites"

#: extmod/ulab/code/numerical/numerical.c
#: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index hors gamme"

#: py/obj.c
msgid "indices must be integers"
msgstr "les indices doivent être des entiers"

#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""
"les indices doivent être des entiers, des tranches ou des listes booléennes"

#: extmod/ulab/code/approx/approx.c
msgid "initial values must be iterable"
msgstr "les valeurs initiales doivent être itérables"

#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "initial_value length is wrong"
msgstr "la longueur de initial_value est incorrecte"

#: py/compile.c
msgid "inline assembler must be a function"
msgstr "l'assembleur doit être une fonction"

#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr "les formes d'entrée et de sortie ne sont pas compatibles"

#: extmod/ulab/code/ulab_create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr "l'argument d'entrée doit être un entier ou un tuple 2"

#: extmod/ulab/code/fft/fft.c
msgid "input array length must be power of 2"
msgstr "la longueur du tableau d'entrée doit être une puissance de 2"

#: extmod/ulab/code/ulab_create.c
msgid "input arrays are not compatible"
msgstr "les tableaux d'entrée ne sont pas compatibles"

#: extmod/ulab/code/poly/poly.c
msgid "input data must be an iterable"
msgstr "les données d'entrée doivent être un itérable"

#: extmod/ulab/code/linalg/linalg.c
msgid "input matrix is asymmetric"
msgstr "la matrice d'entrée est asymétrique"

#: extmod/ulab/code/linalg/linalg.c
msgid "input matrix is singular"
msgstr "la matrice d'entrée est singulière"

#: extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr "l'entrée doit être un tableau dense"

#: extmod/ulab/code/ulab_create.c
msgid "input must be a tensor of rank 2"
msgstr "l'entrée doit être un tenseur de rang 2"

#: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""

#: extmod/ulab/code/filter/filter.c
msgid "input must be one-dimensional"
msgstr ""

#: extmod/ulab/code/linalg/linalg.c
msgid "input must be square matrix"
msgstr "l'entrée doit être une matrice carrée"

#: extmod/ulab/code/numerical/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr "l'entrée doit être tuple, list, range ou ndarray"

#: extmod/ulab/code/poly/poly.c
msgid "input vectors must be of equal length"
msgstr "les vecteurs d'entrée doivent être de longueur égale"

#: extmod/ulab/code/poly/poly.c
msgid "inputs are not iterable"
msgstr ""

#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "l'argument 2 de int() doit être >=2 et <=36"

#: py/objstr.c
msgid "integer required"
msgstr "entier requis"

#: extmod/ulab/code/approx/approx.c
msgid "interp is defined for 1D arrays of equal length"
msgstr "interp est défini pour les tableaux 1D de longueur égale"

#: shared-bindings/_bleio/Adapter.c
#, c-format
msgid "interval must be in range %s-%s"
msgstr "l'intervalle doit être dans la plage %s-%s"

#: lib/netutils/netutils.c
msgid "invalid arguments"
msgstr "arguments invalides"

#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "certificat invalide"

#: extmod/uos_dupterm.c
msgid "invalid dupterm index"
msgstr "index invalide pour dupterm"

#: extmod/modframebuf.c
msgid "invalid format"
msgstr "format invalide"

#: py/objstr.c
msgid "invalid format specifier"
msgstr "spécification de format invalide"

#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr "hostname incorrect"

#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "clé invalide"

#: py/compile.c
msgid "invalid micropython decorator"
msgstr "décorateur micropython invalide"

#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr "pas invalide"

#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr "syntaxe invalide"

#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr "syntaxe invalide pour un entier"

#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr "syntaxe invalide pour un entier de base %d"

#: py/parsenum.c
msgid "invalid syntax for number"
msgstr "syntaxe invalide pour un nombre"

#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "io must be rtc io"
msgstr ""

#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "l'argument 1 de issubclass() doit être une classe"

#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr ""
"l'argument 2 de issubclass() doit être une classe ou un tuple de classes"

#: extmod/ulab/code/ndarray.c
msgid "iterables are not of the same length"
msgstr "les itérables ne sont pas de la même longueur"

#: extmod/ulab/code/linalg/linalg.c
msgid "iterations did not converge"
msgstr "les itérations n'ont pas convergé"

#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""
"'join' s'attend à une liste d'objets str/bytes cohérents avec l'objet self"

#: py/argcheck.c
msgid "keyword argument(s) not yet implemented - use normal args instead"
msgstr ""
"argument(s) nommé(s) pas encore implémenté(s) - utilisez les arguments "
"normaux"

#: py/bc.c
msgid "keywords must be strings"
msgstr "les noms doivent être des chaînes de caractères"

#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr "label '%q' non supporté"

#: py/compile.c
msgid "label redefined"
msgstr "label redéfini"

#: py/stream.c
msgid "length argument not allowed for this type"
msgstr "argument 'length' non-permis pour ce type"

#: shared-bindings/audiomixer/MixerVoice.c
msgid "level must be between 0 and 1"
msgstr "le niveau doit être compris entre 0 et 1"

#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr "Les parties gauches et droites doivent être compatibles"

#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr "la variable locale '%q' a le type '%q' mais la source est '%q'"

#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr "variable locale '%q' utilisée avant d'en connaitre le type"

#: py/vm.c
msgid "local variable referenced before assignment"
msgstr "variable locale référencée avant d'être assignée"

#: py/objint.c
msgid "long int not supported in this build"
msgstr "entiers longs non supportés dans cette build"

#: ports/esp32s2/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr "loopback + silent mode non pris en charge par le périphérique"

#: py/parse.c
msgid "malformed f-string"
msgstr "f-string mal formé"

#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr "tampon trop petit"

#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr "erreur de domaine math"

#: extmod/ulab/code/linalg/linalg.c
msgid "matrix dimensions do not match"
msgstr "les dimensions de la matrice ne correspondent pas"

#: extmod/ulab/code/linalg/linalg.c
msgid "matrix is not positive definite"
msgstr "la matrice n'est pas définie positive"

#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr "max_length doit être 0-%d lorsque fixed_length est %s"

#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "max_length must be > 0"
msgstr "max_length doit être > 0"

#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is 4"
msgstr ""

#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "profondeur maximale de récursivité dépassée"

#: extmod/ulab/code/approx/approx.c
msgid "maxiter must be > 0"
msgstr "maxiter doit être > 0"

#: extmod/ulab/code/approx/approx.c
msgid "maxiter should be > 0"
msgstr "maxiter devrait être > 0"

#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr "l'allocation de mémoire a échoué en allouant %u octets"

#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr "l'allocation de mémoire a échoué, le tas est vérrouillé"

#: py/builtinimport.c
msgid "module not found"
msgstr "module introuvable"

#: extmod/ulab/code/poly/poly.c
msgid "more degrees of freedom than data points"
msgstr "plus de degrés de liberté que de points de données"

#: py/compile.c
msgid "multiple *x in assignment"
msgstr "*x multiple dans l'assignement"

#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr "de multiples bases ont un conflit de lay-out d'instance"

#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr "héritages multiples non supportés"

#: py/emitnative.c
msgid "must raise an object"
msgstr "doit lever un objet"

#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr "doit utiliser un argument nommé pour une fonction key"

#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "nom '%q' non défini"

#: py/runtime.c
msgid "name not defined"
msgstr "nom non défini"

#: py/compile.c
msgid "name reused for argument"
msgstr "nom réutilisé comme argument"

#: py/emitnative.c
msgid "native yield"
msgstr "'yield' natif"

#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr "nécessite plus de %d valeurs à dégrouper"

#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
msgstr "puissance négative sans support des nombres à virgule flottante"

#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
msgstr "compte de décalage négatif"

#: shared-module/sdcardio/SDCard.c
msgid "no SD card"
msgstr "pas de carte SD"

#: py/vm.c
msgid "no active exception to reraise"
msgstr "aucune exception active à relever"

#: shared-bindings/socket/__init__.c shared-module/network/__init__.c
msgid "no available NIC"
msgstr "adapteur réseau non disponible"

#: py/compile.c
msgid "no binding for nonlocal found"
msgstr "pas de lien trouvé pour nonlocal"

#: py/builtinimport.c
msgid "no module named '%q'"
msgstr "pas de module '%q'"

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/displayio/ParallelBus.c
msgid "no reset pin available"
msgstr "pas de broche de réinitialisation disponible"

#: shared-module/sdcardio/SDCard.c
msgid "no response from SD card"
msgstr "pas de réponse de la carte SD"

#: py/runtime.c
msgid "no such attribute"
msgstr "pas de tel attribut"

#: ports/nrf/common-hal/_bleio/Connection.c
msgid "non-UUID found in service_uuids_whitelist"
msgstr "non UUID trouvé dans service_uuids_whitelist"

#: py/compile.c
msgid "non-default argument follows default argument"
msgstr ""
"un argument sans valeur par défaut suit un argument avec valeur par défaut"

#: extmod/modubinascii.c
msgid "non-hex digit found"
msgstr "chiffre non-héxadécimale trouvé"

#: py/compile.c
msgid "non-keyword arg after */**"
msgstr "argument non-nommé après */**"

#: py/compile.c
msgid "non-keyword arg after keyword arg"
msgstr "argument non-nommé après argument nommé"

#: extmod/ulab/code/linalg/linalg.c
msgid "norm is defined for 1D and 2D arrays"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "n'est pas un UUID 128 bits"

#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr ""
"tous les arguments n'ont pas été convertis pendant le formatage de la chaîne"

#: py/objstr.c
msgid "not enough arguments for format string"
msgstr "pas assez d'arguments pour la chaîne de format"

#: extmod/ulab/code/ulab_create.c
msgid "number of points must be at least 2"
msgstr "le nombre de points doit être d'au moins 2"

#: py/obj.c
msgid "object '%q' is not a tuple or list"
msgstr "l'objet '%q' n'est pas un tuple ou une list"

#: py/obj.c
msgid "object does not support item assignment"
msgstr "l'objet ne supporte pas l'assignation d'éléments"

#: py/obj.c
msgid "object does not support item deletion"
msgstr "l'objet ne supporte pas la suppression d'éléments"

#: py/obj.c
msgid "object has no len"
msgstr "l'objet n'a pas de 'len'"

#: py/obj.c
msgid "object is not subscriptable"
msgstr "l'objet n'est pas sous-scriptable"

#: py/runtime.c
msgid "object not an iterator"
msgstr "l'objet n'est pas un itérateur"

#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr "objet non appelable"

#: py/sequence.c shared-bindings/displayio/Group.c
msgid "object not in sequence"
msgstr "l'objet n'est pas dans la séquence"

#: py/runtime.c
msgid "object not iterable"
msgstr "objet non itérable"

#: py/obj.c
msgid "object of type '%q' has no len()"
msgstr "len() indéfinie pour un objet de type '%q'"

#: py/obj.c
msgid "object with buffer protocol required"
msgstr "un objet avec un protocole de tampon est nécessaire"

#: extmod/modubinascii.c
msgid "odd-length string"
msgstr "chaîne de longueur impaire"

#: extmod/ulab/code/ulab_create.c
msgid "offset is too large"
msgstr ""

#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "décalage hors limites"

#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only bit_depth=16 is supported"
msgstr "seul bit_depth = 16 est pris en charge"

#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only sample_rate=16000 is supported"
msgstr "seul sample_rate = 16000 est pris en charge"

#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
#: shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr "seules les tranches avec 'step=1' (cad None) sont supportées"

#: extmod/ulab/code/compare/compare.c extmod/ulab/code/ndarray.c
#: extmod/ulab/code/vector/vectorise.c
msgid "operands could not be broadcast together"
msgstr "les opérandes ne pouvaient pas être diffusés ensemble"

#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""

#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented for flattened array"
msgstr ""

#: extmod/ulab/code/numerical/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr "l'opération n'est pas implémentée sur les ndarrays"

#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr "l'opération n'est pas prise en charge pour un type donné"

#: py/modbuiltins.c
msgid "ord expects a character"
msgstr "ord attend un caractère"

#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr ""
"ord() attend un caractère mais une chaîne de caractère de longueur %d a été "
"trouvée"

#: shared-bindings/displayio/Bitmap.c
msgid "out of range of source"
msgstr "dépassement des bornes de source"

#: shared-bindings/displayio/Bitmap.c
msgid "out of range of target"
msgstr "dépassement des bornes de target"

#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr "dépassement de capacité en convertissant un entier long en mot machine"

#: py/modstruct.c
#, c-format
msgid "pack expected %d items for packing (got %d)"
msgstr "pack attend %d element(s) (%d reçu)"

#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr "la palette doit être longue de 32 octets"

#: shared-bindings/displayio/Palette.c
msgid "palette_index should be an int"
msgstr "palette_index devrait être un entier 'int'"

#: py/compile.c
msgid "parameter annotation must be an identifier"
msgstr "l'annotation du paramètre doit être un identifiant"

#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr "les paramètres doivent être des registres dans la séquence a2 à a5"

#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr "les paramètres doivent être des registres dans la séquence r0 à r3"

#: shared-bindings/displayio/Bitmap.c
msgid "pixel coordinates out of bounds"
msgstr "coordonnées de pixel hors limites"

#: shared-bindings/displayio/Bitmap.c
msgid "pixel value requires too many bits"
msgstr "la valeur du pixel requiet trop de bits"

#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
msgstr ""
"pixel_shader doit être un objet displayio.Palette ou displayio.ColorConverter"

#: shared-module/vectorio/Polygon.c
msgid "polygon can only be registered in one parent"
msgstr "le polygone ne peut être enregistré que dans un parent"

#: ports/esp32s2/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr "'pop' d'une entrée PulseIn vide"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c
#: shared-bindings/ps2io/Ps2.c
msgid "pop from empty %q"
msgstr "pop sur %q vide"

#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr "le 3e argument de pow() ne peut être 0"

#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr "pow() avec 3 arguments nécessite des entiers"

#: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h
#: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h
#: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h
#: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h
#: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h
#: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h
#: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h
#: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h
#: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h
#: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h
#: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h
#: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h
msgid "pressing boot button at start up.\n"
msgstr "bouton boot appuyé lors du démarrage.\n"

#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
msgid "pressing both buttons at start up.\n"
msgstr "les deux boutons appuyés lors du démarrage.\n"

#: extmod/modutimeq.c
msgid "queue overflow"
msgstr "dépassement de file"

#: py/parse.c
msgid "raw f-strings are not implemented"
msgstr "les chaînes f brutes ne sont pas implémentées"

#: extmod/ulab/code/fft/fft.c
msgid "real and imaginary parts must be of equal length"
msgstr "les parties réelles et imaginaires doivent être de longueur égale"

#: py/builtinimport.c
msgid "relative import"
msgstr "import relatif"

#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr "la longueur requise est %d mais l'objet est long de %d"

#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""

#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "l'annotation de return doit être un identifiant"

#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr "return attendait '%q' mais a reçu '%q'"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr "rgb_pins[%d] duplique une autre affectation de broches"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] n'est pas sur le même port que l'horloge"

#: extmod/ulab/code/numerical/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""

#: py/objstr.c
msgid "rsplit(None,n)"
msgstr "rsplit(None, n)"

#: shared-bindings/audiocore/RawSample.c
msgid ""
"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
"'B'"
msgstr ""
"le tampon de sample_source doit être un bytearray ou un tableau de type "
"'h','H', 'b' ou 'B'"

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr "taux d'échantillonage hors gamme"

#: py/modmicropython.c
msgid "schedule stack full"
msgstr "pile de planification pleine"

#: lib/utils/pyexec.c py/builtinimport.c
msgid "script compilation not supported"
msgstr "compilation de script non supportée"

#: extmod/ulab/code/ndarray.c
msgid "shape must be a tuple"
msgstr ""

#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr "signe non autorisé dans les spéc. de formats de chaînes de caractères"

#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr "signe non autorisé avec la spéc. de format d'entier 'c'"

#: py/objstr.c
msgid "single '}' encountered in format string"
msgstr "'}' seule rencontrée dans une chaîne de format"

#: extmod/ulab/code/linalg/linalg.c
msgid "size is defined for ndarrays only"
msgstr "la taille est définie pour les ndarrays uniquement"

#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr "la longueur de sleep ne doit pas être négative"

#: extmod/ulab/code/ndarray.c
msgid "slice step can't be zero"
msgstr "le pas 'step' de la tranche ne peut être zéro"

#: py/objslice.c py/sequence.c
msgid "slice step cannot be zero"
msgstr "le pas 'step' de la tranche ne peut être zéro"

#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr "dépassement de capacité d'un entier court"

#: main.c
msgid "soft reboot\n"
msgstr "redémarrage logiciel\n"

#: extmod/ulab/code/numerical/numerical.c
msgid "sort argument must be an ndarray"
msgstr "l'argument de «sort» doit être un ndarray"

#: extmod/ulab/code/filter/filter.c
msgid "sos array must be of shape (n_section, 6)"
msgstr "le tableau sos doit être de forme (n_section, 6)"

#: extmod/ulab/code/filter/filter.c
msgid "sos[:, 3] should be all ones"
msgstr "sos[:, 3] doivent tous être à un"

#: extmod/ulab/code/filter/filter.c
msgid "sosfilt requires iterable arguments"
msgstr "sosfilt nécessite des argument itératifs"

#: shared-bindings/displayio/Bitmap.c
msgid "source palette too large"
msgstr "la palette source est trop grande"

#: py/objstr.c
msgid "start/end indices"
msgstr "indices de début/fin"

#: shared-bindings/displayio/Shape.c
msgid "start_x should be an int"
msgstr "'start_x' doit être un entier 'int'"

#: shared-bindings/random/__init__.c
msgid "step must be non-zero"
msgstr "le pas 'step' doit être non nul"

#: shared-bindings/busio/UART.c
msgid "stop must be 1 or 2"
msgstr "stop doit être 1 ou 2"

#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr "stop n'est pas accessible au démarrage"

#: py/stream.c
msgid "stream operation not supported"
msgstr "opération de flux non supportée"

#: py/objstrunicode.c
msgid "string indices must be integers, not %q"
msgstr "les indices d'une chaîne doivent être des entiers, pas %q"

#: py/stream.c
msgid "string not supported; use bytes or bytearray"
msgstr ""
"chaîne de carac. non supportée ; utilisez des bytes ou un tableau de bytes"

#: extmod/moductypes.c
msgid "struct: cannot index"
msgstr "struct : indexage impossible"

#: extmod/moductypes.c
msgid "struct: no fields"
msgstr "struct : aucun champs"

#: py/objarray.c py/objstr.c
msgid "substring not found"
msgstr "sous-chaîne non trouvée"

#: py/compile.c
msgid "super() can't find self"
msgstr "super() ne peut pas trouver self"

#: extmod/modujson.c
msgid "syntax error in JSON"
msgstr "erreur de syntaxe JSON"

#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr "erreur de syntaxe dans le descripteur d'uctypes"

#: shared-bindings/touchio/TouchIn.c
msgid "threshold must be in the range 0-65536"
msgstr "le seuil doit être dans la gamme 0-65536"

#: shared-bindings/time/__init__.c
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() prend une séquence de longueur 9"

#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr "le délai d'expiration a dépassé la valeur maximale prise en charge"

#: shared-bindings/busio/UART.c
msgid "timeout must be 0.0-100.0 seconds"
msgstr "le délai doit être compris entre 0.0 et 100.0 secondes"

#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "timeout must be >= 0.0"
msgstr "'timeout' doit être >= 0.0"

#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v1 card"
msgstr "Délai d’expiration dépassé en attendant une carte v1"

#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v2 card"
msgstr "Délai d’expiration dépassé en attendant une carte v2"

#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr "'timestamp' hors bornes pour 'time_t' de la plateforme"

#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""

#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "trop d'arguments fournis avec ce format"

#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr "trop d'indices"

#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr "trop de valeur à dégrouper (%d attendues)"

#: extmod/ulab/code/approx/approx.c
msgid "trapz is defined for 1D arrays of equal length"
msgstr "trapz n'est défini que pour des tableaux 1D de longueur égale"

#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "trigger level must be 0 or 1"
msgstr ""

#: extmod/ulab/code/linalg/linalg.c
msgid "tuple index out of range"
msgstr "index du tuple hors gamme"

#: py/obj.c
msgid "tuple/list has wrong length"
msgstr "tuple/liste a une mauvaise longueur"

#: ports/esp32s2/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr "twai_driver_install a renvoyé l'erreur esp-idf #%d"

#: ports/esp32s2/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr "twai_start a renvoyé l'erreur esp-idf #%d"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
msgid "tx and rx cannot both be None"
msgstr "tx et rx ne peuvent être 'None' tous les deux"

#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr "le type '%q' n'est pas un type de base accepté"

#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr "le type n'est pas un type de base accepté"

#: py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr "l'objet de type '%q' n'a pas d'attribut '%q'"

#: py/objgenerator.c
msgid "type object 'generator' has no attribute '__await__'"
msgstr "le type 'generator' n'a pas d'attribut '__await__'"

#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr "le type prend 1 ou 3 arguments"

#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr "ulonglong trop grand"

#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr "opération unaire '%q' non implémentée"

#: py/parse.c
msgid "unexpected indent"
msgstr "indentation inattendue"

#: py/bc.c
msgid "unexpected keyword argument"
msgstr "argument nommé inattendu"

#: py/bc.c py/objnamedtuple.c
msgid "unexpected keyword argument '%q'"
msgstr "argument nommé '%q' inattendu"

#: py/lexer.c
msgid "unicode name escapes"
msgstr "échappements de nom unicode"

#: py/parse.c
msgid "unindent does not match any outer indentation level"
msgstr "la désindentation ne correspond à aucune indentation précédente"

#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr "spécification %c de conversion inconnue"

#: py/objstr.c
msgid "unknown format code '%c' for object of type '%q'"
msgstr "code de formatage inconnu '%c' pour objet de type '%q'"

#: py/compile.c
msgid "unknown type"
msgstr "type inconnu"

#: py/emitnative.c
msgid "unknown type '%q'"
msgstr "type '%q' inconnu"

#: py/objstr.c
msgid "unmatched '{' in format"
msgstr "'{' sans correspondance dans le format"

#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr "attribut illisible"

#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
#: shared-module/vectorio/Polygon.c
msgid "unsupported %q type"
msgstr "type %q non pris on charge"

#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr "instruction Thumb '%s' non supportée avec %d arguments"

#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr "instruction Xtensa '%s' non supportée avec %d arguments"

#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr "caractère de format '%c' (0x%x) non supporté à l'index %d"

#: py/runtime.c
msgid "unsupported type for %q: '%q'"
msgstr "type non supporté pour %q : '%q'"

#: py/runtime.c
msgid "unsupported type for operator"
msgstr "type non supporté pour l'opérateur"

#: py/runtime.c
msgid "unsupported types for %q: '%q', '%q'"
msgstr "types non supportés pour %q: '%q', '%q'"

#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr "la valeur doit tenir dans %d octet(s)"

#: shared-bindings/displayio/Bitmap.c
msgid "value_count must be > 0"
msgstr "'value_count' doit être > 0"

#: extmod/ulab/code/linalg/linalg.c
msgid "vectors must have same lengths"
msgstr "les vecteurs doivent avoir la même longueur"

#: ports/esp32s2/common-hal/alarm/pin/__init__.c
msgid "wakeup conflict"
msgstr ""

#: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr "chien de garde non initialisé"

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr "watchdog timeout doit être supérieur à 0"

#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "width must be greater than zero"
msgstr "width doit être plus grand que zero"

#: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval"
msgstr "la fenêtre doit être <= intervalle"

#: extmod/ulab/code/numerical/numerical.c
msgid "wrong axis index"
msgstr ""

#: extmod/ulab/code/ulab_create.c
msgid "wrong axis specified"
msgstr ""

#: extmod/ulab/code/vector/vectorise.c
msgid "wrong input type"
msgstr "type d'entrée incorrect"

#: extmod/ulab/code/ulab_create.c py/objstr.c
msgid "wrong number of arguments"
msgstr "mauvais nombres d'arguments"

#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr "mauvais nombre de valeurs à dégrouper"

#: extmod/ulab/code/ndarray.c
msgid "wrong operand type"
msgstr "type d'opérande incorrect"

#: extmod/ulab/code/vector/vectorise.c
msgid "wrong output type"
msgstr "type de sortie incorrect"

#: shared-module/displayio/Shape.c
msgid "x value out of bounds"
msgstr "valeur x hors limites"

#: shared-bindings/displayio/Shape.c
msgid "y should be an int"
msgstr "'y' doit être un entier 'int'"

#: shared-module/displayio/Shape.c
msgid "y value out of bounds"
msgstr "valeur y hors limites"

#: py/objrange.c
msgid "zero step"
msgstr "'step' nul"

#: extmod/ulab/code/filter/filter.c
msgid "zi must be an ndarray"
msgstr "zi doit être ndarray"

#: extmod/ulab/code/filter/filter.c
msgid "zi must be of float type"
msgstr "zi doit être de type float"

#: extmod/ulab/code/filter/filter.c
msgid "zi must be of shape (n_section, 2)"
msgstr "zi doit être de forme (n_section, 2)"

#~ msgid "Only IPv4 SOCK_STREAM sockets supported"
#~ msgstr "Seules les sockets IPv4 SOCK_STREAM sont prises en charge"

#~ msgid "arctan2 is implemented for scalars and ndarrays only"
#~ msgstr ""
#~ "arctan2 est implémenté uniquement pour les scalaires et les ndarrays"

#~ msgid "axis must be -1, 0, None, or 1"
#~ msgstr "l'axe doit être -1, 0, None ou 1"

#~ msgid "axis must be -1, 0, or 1"
#~ msgstr "l'axe doit être -1, 0 ou 1"

#~ msgid "axis must be None, 0, or 1"
#~ msgstr "l'axe doit être None, 0 ou 1"

#~ msgid "cannot reshape array (incompatible input/output shape)"
#~ msgstr ""
#~ "ne peut pas remodeler le tableau (forme d'entrée / sortie incompatible)"

#~ msgid "could not broadast input array from shape"
#~ msgstr "n'a pas pu diffuser le tableau d'entrée à partir de la forme"

#~ msgid "ddof must be smaller than length of data set"
#~ msgstr "ddof doit être inférieur à la longueur de l'ensemble de données"

#~ msgid "function is implemented for scalars and ndarrays only"
#~ msgstr ""
#~ "la fonction est implémentée pour les scalaires et les ndarrays uniquement"

#~ msgid "n must be between 0, and 9"
#~ msgstr "n doit être compris entre 0 et 9"

#~ msgid "number of arguments must be 2, or 3"
#~ msgstr "le nombre d'arguments doit être 2 ou 3"

#~ msgid "right hand side must be an ndarray, or a scalar"
#~ msgstr "le côté droit doit être un ndarray ou un scalaire"

#~ msgid "shape must be a 2-tuple"
#~ msgstr "la forme doit être un tuple 2"

#~ msgid "sorted axis can't be longer than 65535"
#~ msgstr "sorted axis ne peut pas dépasser 65535"

#~ msgid "wrong argument type"
#~ msgstr "type d'argument incorrect"

#~ msgid "wrong index type"
#~ msgstr "type d'index incorrect"

#~ msgid "Must provide SCK pin"
#~ msgstr "Vous devez fournir un code PIN SCK"

#~ msgid ""
#~ "\n"
#~ "To exit, please reset the board without "
#~ msgstr ""
#~ "\n"
#~ "Pour quitter, veuillez réinitialiser la carte sans "

#~ msgid "PulseOut not supported on this chip"
#~ msgstr "PulseOut non pris en charge sur cette puce"

#~ msgid "tuple/list required on RHS"
#~ msgstr "tuple ou liste requis en partie droite"

#~ msgid "%q indices must be integers, not %s"
#~ msgstr "les indices %q doivent être des entiers, pas %s"

#~ msgid "'%s' object cannot assign attribute '%q'"
#~ msgstr "L'objet '%s' ne peut pas attribuer '%q'"

#~ msgid "'%s' object does not support '%q'"
#~ msgstr "L'objet '%s' ne prend pas en charge '%q'"

#~ msgid "'%s' object does not support item assignment"
#~ msgstr "l'objet '%s' ne supporte pas l'assignation d'éléments"

#~ msgid "'%s' object does not support item deletion"
#~ msgstr "l'objet '%s' ne supporte pas la suppression d'éléments"

#~ msgid "'%s' object has no attribute '%q'"
#~ msgstr "l'objet '%s' n'a pas d'attribut '%q'"

#~ msgid "'%s' object is not an iterator"
#~ msgstr "l'objet '%s' n'est pas un itérateur"

#~ msgid "'%s' object is not callable"
#~ msgstr "l'objet '%s' n'est pas appelable"

#~ msgid "'%s' object is not iterable"
#~ msgstr "l'objet '%s' n'est pas itérable"

#~ msgid "'%s' object is not subscriptable"
#~ msgstr "l'objet '%s' n'est pas sous-scriptable"

#~ msgid "Invalid I2C pin selection"
#~ msgstr "Sélection de broches I2C non valide"

#~ msgid "Invalid SPI pin selection"
#~ msgstr "Sélection de broches SPI non valide"

#~ msgid "Invalid UART pin selection"
#~ msgstr "Sélection de broches UART non valide"

#~ msgid "Pop from an empty Ps2 buffer"
#~ msgstr "Pop à partir d'un tampon Ps2 vide"

#~ msgid "Running in safe mode! Auto-reload is off.\n"
#~ msgstr "Mode sans-échec ! Auto-chargement désactivé.\n"

#~ msgid "Running in safe mode! Not running saved code.\n"
#~ msgstr "Mode sans-échec ! Le code sauvegardé n'est pas éxecuté.\n"

#~ msgid "__init__() should return None, not '%s'"
#~ msgstr "__init__() doit retourner None, pas '%s'"

#~ msgid "can't convert %s to complex"
#~ msgstr "ne peut convertir %s en nombre complexe"

#~ msgid "can't convert %s to float"
#~ msgstr "ne peut convertir %s en nombre à virgule flottante 'float'"

#~ msgid "can't convert %s to int"
#~ msgstr "ne peut convertir %s en entier 'int'"

#~ msgid "can't convert NaN to int"
#~ msgstr "on ne peut convertir NaN en entier 'int'"

#~ msgid "can't convert address to int"
#~ msgstr "ne peut convertir l'adresse en entier 'int'"

#~ msgid "can't convert inf to int"
#~ msgstr "on ne peut convertir l'infini 'inf' en entier 'int'"

#~ msgid "can't convert to complex"
#~ msgstr "ne peut convertir en nombre complexe"

#~ msgid "can't convert to float"
#~ msgstr "ne peut convertir en nombre à virgule flottante 'float'"

#~ msgid "can't convert to int"
#~ msgstr "ne peut convertir en entier 'int'"

#~ msgid "object '%s' is not a tuple or list"
#~ msgstr "l'objet '%s' n'est pas un tuple ou une liste"

#~ msgid "object of type '%s' has no len()"
#~ msgstr "l'objet de type '%s' n'a pas de len()"

#~ msgid "pop from an empty set"
#~ msgstr "'pop' d'un ensemble set vide"

#~ msgid "pop from empty list"
#~ msgstr "'pop' d'une liste vide"

#~ msgid "popitem(): dictionary is empty"
#~ msgstr "popitem() : dictionnaire vide"

#~ msgid "string index out of range"
#~ msgstr "index de chaîne hors gamme"

#~ msgid "string indices must be integers, not %s"
#~ msgstr ""
#~ "les indices de chaîne de caractères doivent être des entiers, pas %s"

#~ msgid "struct: index out of range"
#~ msgstr "struct : index hors limites"

#~ msgid "unknown format code '%c' for object of type '%s'"
#~ msgstr "code de format '%c' inconnu pour un objet de type '%s'"

#~ msgid "unsupported type for %q: '%s'"
#~ msgstr "type non supporté pour %q : '%s'"

#~ msgid "unsupported types for %q: '%s', '%s'"
#~ msgstr "type non supporté pour %q : '%s', '%s'"

#~ msgid "'async for' or 'async with' outside async function"
#~ msgstr "'async for' ou 'async with' sans fonction asynchrone extérieure"

#~ msgid "PulseIn not supported on this chip"
#~ msgstr "PulseIn non pris en charge sur cette puce"

#~ msgid "AP required"
#~ msgstr "'AP' requis"

#~ msgid "Address is not %d bytes long or is in wrong format"
#~ msgstr "L'adresse n'est pas longue de %d octets ou est d'un format erroné"

#~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
#~ msgstr ""
#~ "Tentative d'allocation de tas alors que la VM MicroPython ne tourne pas.\n"

#~ msgid "Can not use dotstar with %s"
#~ msgstr "Impossible d'utiliser 'dotstar' avec %s"

#~ msgid "Can't add services in Central mode"
#~ msgstr "Impossible d'ajouter des services en mode Central"

#~ msgid "Can't advertise in Central mode"
#~ msgstr "Impossible de publier en mode Central"

#~ msgid "Can't change the name in Central mode"
#~ msgstr "Modification du nom impossible en mode Central"

#~ msgid "Can't connect in Peripheral mode"
#~ msgstr "Impossible de se connecter en mode 'Peripheral'"

#~ msgid "Cannot connect to AP"
#~ msgstr "Impossible de se connecter à 'AP'"

#~ msgid "Cannot disconnect from AP"
#~ msgstr "Impossible de se déconnecter de 'AP'"

#~ msgid "Cannot set STA config"
#~ msgstr "Impossible de configurer STA"

#~ msgid "Cannot update i/f status"
#~ msgstr "le status i/f ne peut être mis à jour"

#~ msgid "Characteristic UUID doesn't match Service UUID"
#~ msgstr "L'UUID de 'Characteristic' ne correspond pas à l'UUID du Service"

#~ msgid "Characteristic already in use by another Service."
#~ msgstr "'Characteristic' déjà en utilisation par un autre service"

#~ msgid "Could not decode ble_uuid, err 0x%04x"
#~ msgstr "Impossible de décoder le 'ble_uuid', err 0x%04x"

#~ msgid "Crash into the HardFault_Handler.\n"
#~ msgstr "Plantage vers le 'HardFault_Handler'.\n"

#~ msgid "Data too large for the advertisement packet"
#~ msgstr "Données trop volumineuses pour le paquet de diffusion"

#~ msgid "Don't know how to pass object to native function"
#~ msgstr "Ne sais pas comment passer l'objet à une fonction native"

#~ msgid "ESP8226 does not support safe mode."
#~ msgstr "L'ESP8266 ne supporte pas le mode sans-échec"

#~ msgid "ESP8266 does not support pull down."
#~ msgstr "L'ESP8266 ne supporte pas le rappel (pull-down)"

#~ msgid "Error in ffi_prep_cif"
#~ msgstr "Erreur dans ffi_prep_cif"

#, fuzzy
#~ msgid "Failed to acquire mutex"
#~ msgstr "Echec de l'obtention de mutex"

#, fuzzy
#~ msgid "Failed to add characteristic, err 0x%04x"
#~ msgstr "Echec de l'ajout de caractéristique, err 0x%04x"

#, fuzzy
#~ msgid "Failed to add service"
#~ msgstr "Echec de l'ajout de service"

#, fuzzy
#~ msgid "Failed to add service, err 0x%04x"
#~ msgstr "Echec de l'ajout de service, err 0x%04x"

#, fuzzy
#~ msgid "Failed to change softdevice state"
#~ msgstr "Echec de la modification de l'état du périphérique"

#, fuzzy
#~ msgid "Failed to connect:"
#~ msgstr "Echec de connection:"

#, fuzzy
#~ msgid "Failed to continue scanning"
#~ msgstr "Impossible de poursuivre le scan"

#, fuzzy
#~ msgid "Failed to continue scanning, err 0x%04x"
#~ msgstr "Impossible de poursuivre le scan, err 0x%04x"

#, fuzzy
#~ msgid "Failed to create mutex"
#~ msgstr "Echec de la création de mutex"

#, fuzzy
#~ msgid "Failed to discover services"
#~ msgstr "Echec de la découverte de services"

#, fuzzy
#~ msgid "Failed to get local address"
#~ msgstr "Echec de l'obtention de l'adresse locale"

#, fuzzy
#~ msgid "Failed to get softdevice state"
#~ msgstr "Echec de l'obtention de l'état du périphérique"

#, fuzzy
#~ msgid "Failed to notify or indicate attribute value, err %0x04x"
#~ msgstr "Impossible de notifier la valeur de l'attribut. status: 0x%08lX"

#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
#~ msgstr ""
#~ "Impossible de notifier ou d'indiquer la valeur de l'attribut, err 0x%04x"

#, fuzzy
#~ msgid "Failed to read CCCD value, err 0x%04x"
#~ msgstr "Impossible de lire la valeur 'CCCD', err 0x%04x"

#, fuzzy
#~ msgid "Failed to read attribute value, err %0x04x"
#~ msgstr "Impossible de lire la valeur de l'attribut. status: 0x%08lX"

#~ msgid "Failed to read attribute value, err 0x%04x"
#~ msgstr "Impossible de lire la valeur de l'attribut, err 0x%04x"

#, fuzzy
#~ msgid "Failed to read gatts value, err 0x%04x"
#~ msgstr "Impossible de lire la valeur de 'gatts', err 0x%04x"

#, fuzzy
#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
#~ msgstr "Echec de l'ajout de l'UUID du fournisseur, err 0x%04x"

#, fuzzy
#~ msgid "Failed to release mutex"
#~ msgstr "Impossible de libérer mutex"

#, fuzzy
#~ msgid "Failed to start advertising"
#~ msgstr "Echec du démarrage de la diffusion"

#, fuzzy
#~ msgid "Failed to start advertising, err 0x%04x"
#~ msgstr "Impossible de commencer à diffuser, err 0x%04x"

#, fuzzy
#~ msgid "Failed to start scanning"
#~ msgstr "Impossible de commencer à scanner"

#, fuzzy
#~ msgid "Failed to start scanning, err 0x%04x"
#~ msgstr "Impossible de commencer à scanner, err 0x%04x"

#, fuzzy
#~ msgid "Failed to stop advertising"
#~ msgstr "Echec de l'arrêt de diffusion"

#, fuzzy
#~ msgid "Failed to stop advertising, err 0x%04x"
#~ msgstr "Echec de l'arrêt de diffusion, err 0x%04x"

#, fuzzy
#~ msgid "Failed to write attribute value, err 0x%04x"
#~ msgstr "Impossible d'écrire la valeur de l'attribut, err 0x%04x"

#, fuzzy
#~ msgid "Failed to write gatts value, err 0x%04x"
#~ msgstr "Impossible d'écrire la valeur de 'gatts', err 0x%04x"

#~ msgid "Flash erase failed"
#~ msgstr "L'effacement de la flash a échoué"

#~ msgid "Flash erase failed to start, err 0x%04x"
#~ msgstr "Echec du démarrage de l'effacement de la flash, err 0x%04x"

#~ msgid "Flash write failed"
#~ msgstr "L'écriture de la flash échoué"

#~ msgid "Flash write failed to start, err 0x%04x"
#~ msgstr "Echec du démarrage de l'écriture de la flash, err 0x%04x"

#~ msgid "Function requires lock."
#~ msgstr "La fonction nécessite un verrou."

#~ msgid "GPIO16 does not support pull up."
#~ msgstr "Le GPIO16 ne supporte pas le tirage (pull-up)"

#~ msgid "I2C operation not supported"
#~ msgstr "opération sur I2C non supportée"

#~ msgid "Invalid bit clock pin"
#~ msgstr "Broche invalide pour 'bit clock'"

#~ msgid "Invalid clock pin"
#~ msgstr "Broche d'horloge invalide"

#~ msgid "Invalid data pin"
#~ msgstr "Broche de données invalide"

#~ msgid ""
#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
#~ " with the contents of your CIRCUITPY drive and this message:\n"
#~ msgstr ""
#~ "On dirait que notre code CircuitPython a durement planté. Oups !\n"
#~ "Merci de remplir un ticket sur https://github.com/adafruit/circuitpython/"
#~ "issues\n"
#~ "avec le contenu de votre lecteur CIRCUITPY et ce message:\n"

#~ msgid "Maximum PWM frequency is %dhz."
#~ msgstr "La fréquence de PWM maximale est %dHz"

#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
#~ msgstr "Saut MicroPython NLR a échoué. Corruption de mémoire possible.\n"

#~ msgid "MicroPython fatal error.\n"
#~ msgstr "Erreur fatale de MicroPython.\n"

#~ msgid "Minimum PWM frequency is 1hz."
#~ msgstr "La fréquence de PWM minimale est 1Hz"

#~ msgid "Multiple PWM frequencies not supported. PWM already set to %dhz."
#~ msgstr ""
#~ "Les fréquences de PWM multiples ne sont pas supportées. PWM réglé à %dHz"

#~ msgid "Must be a Group subclass."
#~ msgstr "Doit être une sous-classe de 'Group'"

#~ msgid "Negative step not supported"
#~ msgstr "Étape négative non prise en charge"

#~ msgid "No PulseIn support for %q"
#~ msgstr "Pas de support de PulseIn pour %q"

#~ msgid "No hardware support for analog out."
#~ msgstr "Pas de support matériel pour une sortie analogique"

#~ msgid "Only Windows format, uncompressed BMP supported %d"
#~ msgstr "Seul les BMP non-compressé au format Windows sont supportés %d"

#~ msgid "Only bit maps of 8 bit color or less are supported"
#~ msgstr "Seules les bitmaps de 8bits par couleur ou moins sont supportées"

#~ msgid ""
#~ "Only monochrome, indexed 8bpp, and 16bpp or greater BMPs supported: %d "
#~ "bpp given"
#~ msgstr ""
#~ "Seul les BMP monochromes, 8bit indexé et 16bit sont supportés: %d bpp "
#~ "fourni"

#, fuzzy
#~ msgid "Only slices with step=1 (aka None) are supported"
#~ msgstr "seuls les slices avec 'step=1' (cad 'None') sont supportées"

#~ msgid "Only true color (24 bpp or higher) BMP supported %x"
#~ msgstr "Seul les BMP 24bits ou plus sont supportés %x"

#~ msgid "Only tx supported on UART1 (GPIO2)."
#~ msgstr "Seul le tx est supporté sur l'UART1 (GPIO2)."

#~ msgid "PWM not supported on pin %d"
#~ msgstr "La broche %d ne supporte pas le PWM"

#~ msgid "Pin %q does not have ADC capabilities"
#~ msgstr "La broche %q n'a pas de convertisseur analogique-digital"

#~ msgid "Pin(16) doesn't support pull"
#~ msgstr "Pin(16) ne supporte pas le tirage (pull)"

#~ msgid "Pins not valid for SPI"
#~ msgstr "Broche invalide pour le SPI"

#~ msgid "Pixel beyond bounds of buffer"
#~ msgstr "Pixel au-delà des limites du tampon"

#, fuzzy
#~ msgid "Range out of bounds"
#~ msgstr "adresse hors limites"

#~ msgid "STA must be active"
#~ msgstr "'STA' doit être actif"

#~ msgid "STA required"
#~ msgstr "'STA' requis"

#~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
#~ msgstr "Assertion en mode 'soft-device', id: 0x%08lX, pc: 0x%08lX"

#~ msgid ""
#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
#~ "Please increase stack size limits and press reset (after ejecting "
#~ "CIRCUITPY).\n"
#~ "If you didn't change the stack, then file an issue here with the contents "
#~ "of your CIRCUITPY drive:\n"
#~ msgstr ""
#~ "Le tas (heap) de CircuitPython a été corrompu parce que la pile était "
#~ "trop petite.\n"
#~ "Augmentez la limite de taille de la pile et appuyez sur 'reset' (après "
#~ "avoir éjecté CIRCUITPY).\n"
#~ "Si vous n'avez pas modifié la pile, merci de remplir un ticket avec le "
#~ "contenu  de votre lecteur CIRCUITPY :\n"

#, fuzzy
#~ msgid ""
#~ "The microcontroller's power dipped. Please make sure your power supply "
#~ "provides\n"
#~ "enough power for the whole circuit and press reset (after ejecting "
#~ "CIRCUITPY).\n"
#~ msgstr ""
#~ "L'alimentation du microcontroleur a chuté. Merci de vérifier que votre "
#~ "alimentation fournit\n"
#~ "suffisamment de puissance pour l'ensemble du circuit et appuyez sur "
#~ "'reset' (après avoir éjecté CIRCUITPY).\n"

#~ msgid ""
#~ "The reset button was pressed while booting CircuitPython. Press again to "
#~ "exit safe mode.\n"
#~ msgstr ""
#~ "Le bouton 'reset' a été appuyé pendant le démarrage de CircuitPython. "
#~ "Appuyer de nouveau pour quitter de le mode sans-échec.\n"

#~ msgid "Tile indices must be 0 - 255"
#~ msgstr "Les indices des tuiles doivent être compris entre 0 et 255 "

#~ msgid "UART(%d) does not exist"
#~ msgstr "UART(%d) n'existe pas"

#~ msgid "UART(1) can't read"
#~ msgstr "UART(1) ne peut pas lire"

#~ msgid "UUID integer value not in range 0 to 0xffff"
#~ msgstr "valeur de l'entier UUID est hors-bornes 0 à 0xffff"

#~ msgid "Unable to remount filesystem"
#~ msgstr "Impossible de remonter le système de fichiers"

#~ msgid "Unknown type"
#~ msgstr "Type inconnu"

#~ msgid "Use esptool to erase flash and re-upload Python instead"
#~ msgstr ""
#~ "Utilisez 'esptool' pour effacer la flash et recharger Python à la place"

#~ msgid "Voice index too high"
#~ msgstr "Index de la voix trop grand"

#, fuzzy
#~ msgid ""
#~ "You are running in safe mode which means something unanticipated "
#~ "happened.\n"
#~ msgstr ""
#~ "Vous êtes en mode sans-échec ce qui signifie qu'un imprévu est survenu.\n"

#~ msgid "bad GATT role"
#~ msgstr "mauvais rôle GATT"

#~ msgid "bits must be 8"
#~ msgstr "les bits doivent être 8"

#~ msgid "buf is too small. need %d bytes"
#~ msgstr "'buf' est trop petit. Besoin de %d octets"

#~ msgid "buffer too long"
#~ msgstr "tampon trop long"

#~ msgid "buffers must be the same length"
#~ msgstr "les tampons doivent être de la même longueur"

#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
#~ msgstr "'byteorder' n'est pas une instance de ByteOrder (reçu un %s)"

#~ msgid "can query only one param"
#~ msgstr "ne peut demander qu'un seul paramètre"

#~ msgid "can't get AP config"
#~ msgstr "impossible de récupérer la config de 'AP'"

#~ msgid "can't get STA config"
#~ msgstr "impossible de récupérer la config de 'STA'"

#~ msgid "can't set AP config"
#~ msgstr "impossible de régler la config de 'AP'"

#~ msgid "can't set STA config"
#~ msgstr "impossible de régler la config de 'STA'"

#~ msgid "characteristics includes an object that is not a Characteristic"
#~ msgstr ""
#~ "'characteristics' inclut un objet qui n'est pas une 'Characteristic'"

#, fuzzy
#~ msgid "color buffer must be a buffer or int"
#~ msgstr "le tampon de couleur doit être un tampon ou un entier 'int'"

#~ msgid "either pos or kw args are allowed"
#~ msgstr "soit 'pos', soit 'kw' est permis en argument"

#~ msgid "empty %q list"
#~ msgstr "liste %q vide"

#~ msgid "expected a DigitalInOut"
#~ msgstr "objet DigitalInOut attendu"

#~ msgid "expecting a pin"
#~ msgstr "une broche (Pin) est attendue"

#~ msgid "firstbit must be MSB"
#~ msgstr "le 1er bit doit être le MSB"

#~ msgid "flash location must be below 1MByte"
#~ msgstr "l'emplacement en mémoire flash doit être inférieur à 1Mo"

#~ msgid "frequency can only be either 80Mhz or 160MHz"
#~ msgstr "la fréquence doit être soit 80MHz soit 160MHz"

#~ msgid "impossible baudrate"
#~ msgstr "débit impossible"

#~ msgid "interval not in range 0.0020 to 10.24"
#~ msgstr "intervalle hors bornes 0.0020 à 10.24"

#~ msgid "invalid I2C peripheral"
#~ msgstr "périphérique I2C invalide"

#~ msgid "invalid SPI peripheral"
#~ msgstr "périphérique SPI invalide"

#~ msgid "invalid alarm"
#~ msgstr "alarme invalide"

#~ msgid "invalid buffer length"
#~ msgstr "longueur de tampon invalide"

#~ msgid "invalid data bits"
#~ msgstr "bits de données invalides"

#~ msgid "invalid pin"
#~ msgstr "broche invalide"

#~ msgid "invalid stop bits"
#~ msgstr "bits d'arrêt invalides"

#~ msgid "len must be multiple of 4"
#~ msgstr "'len' doit être un multiple de 4"

#~ msgid "memory allocation failed, allocating %u bytes for native code"
#~ msgstr ""
#~ "l'allocation de mémoire a échoué en allouant %u octets pour un code natif"

#~ msgid "must specify all of sck/mosi/miso"
#~ msgstr "sck, mosi et miso doivent tous être spécifiés"

#, fuzzy
#~ msgid "name must be a string"
#~ msgstr "les noms doivent être des chaînes de caractère"

#~ msgid "not a valid ADC Channel: %d"
#~ msgstr "canal ADC non valide : %d"

#~ msgid "pin does not have IRQ capabilities"
#~ msgstr "la broche ne supporte pas les interruptions (IRQ)"

#, fuzzy
#~ msgid "position must be 2-tuple"
#~ msgstr "position doit être un 2-tuple"

#~ msgid "rawbuf is not the same size as buf"
#~ msgstr "'rawbuf' n'est pas de la même taille que 'buf'"

#, fuzzy
#~ msgid "readonly attribute"
#~ msgstr "attribut en lecture seule"

#~ msgid "scan failed"
#~ msgstr "échec du scan"

#~ msgid "services includes an object that is not a Service"
#~ msgstr "'services' inclut un object qui n'est pas un 'Service'"

#~ msgid "tile index out of bounds"
#~ msgstr "indice de tuile hors limites"

#~ msgid "time.struct_time() takes exactly 1 argument"
#~ msgstr "time.struct_time() prend exactement 1 argument"

#~ msgid "timeout >100 (units are now seconds, not msecs)"
#~ msgstr "timeout >100 (exprimé en secondes, pas en ms)"

#~ msgid "too many arguments"
#~ msgstr "trop d'arguments"

#~ msgid "unknown config param"
#~ msgstr "paramètre de config. inconnu"

#~ msgid "unknown format code '%c' for object of type 'float'"
#~ msgstr "code de format '%c' inconnu pour un objet de type 'float'"

#~ msgid "unknown format code '%c' for object of type 'str'"
#~ msgstr "code de format '%c' inconnu pour un objet de type 'str'"

#~ msgid "unknown status param"
#~ msgstr "paramètre de statut inconnu"

#~ msgid "wifi_set_ip_info() failed"
#~ msgstr "wifi_set_ip_info() a échoué"

#~ msgid "write_args must be a list, tuple, or None"
#~ msgstr "'write_args' doit être une liste, un tuple ou 'None'"