c588cc6db0
first pass of DigitalIO
2019-07-17 14:07:33 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
f31a0d9cf5
Serial REPL support
2019-07-11 13:41:10 -04:00
d12e1a8d74
Merge pull request #1990 from kattni/pyruler
...
Adding PyRuler to CircuitPython.
2019-07-10 12:28:43 -07:00
a0e6975b9d
Add some usb reference material, non functional
2019-07-10 14:26:57 -04:00
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
7742a97c22
Add STM32F412-DISCO support, cleanup
2019-07-09 13:03:22 -04:00
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
040acc3a32
remove dependencies for stable build
2019-07-01 19:47:10 -04:00
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
94a2eff05c
remove build, fix link issues)
2019-06-28 19:22:23 -04:00
04a9bc0d35
case changes
2019-06-28 16:45:07 -04:00
b93f93f174
name change but actually
2019-06-28 16:34:27 -04:00
caed59ec64
name change
2019-06-28 16:21:13 -04:00
16ba035ba7
first commit, very crude
2019-06-28 15:36:08 -04:00
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
d3adfde22a
Merge pull request #1968 from adafruit/4.0.x
...
Merge in nrf neopixel fix
2019-06-25 11:35:58 -07:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
1356819de1
Handle None for BLE name; fix ScanEntry bug; compile issue
2019-06-17 23:16:40 -04:00
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
608bf5076b
Merge pull request #1804 from ITACAInnovation/master
...
Merging updates
2019-04-16 13:54:40 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
7822d013cd
Merge pull request #1798 from ntavish/papyr
...
Add support for Electronut Labs Papyr.
2019-04-16 10:13:19 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
7573da03f6
Merge pull request #1779 from dhalbert/nrf-nvm-2
...
nrf nvm: touchups to nickzoic PR #1768
2019-04-15 14:23:35 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
19278e0284
Merge pull request #1736 from nickzoic/circuitpython-nickzoic-1046-nrf-rtc-2
...
Circuitpython nickzoic 1046 nrf rtc 2
2019-04-02 17:38:24 -04:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
e254597c24
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-28 17:27:59 -07:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
54a41e0812
Merge branch 'master' into circuitpython-nickzoic-1046-nrf-rtc
2019-03-28 14:48:10 +11:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
7bac10ab6e
Merge pull request #1700 from ITACAInnovation/master
...
uChip board support for Circuitpython environment
2019-03-25 14:05:12 -04:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
8543695f9d
Merge pull request #1653 from python-ugame/master
...
Add frozen stage module to ugame10 board
2019-03-19 09:42:20 -07:00
9cceea0d68
nrf: fix internal flash writes
2019-03-18 09:11:40 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
3f6713abc1
Fix unix build by using safe mode stub
2019-03-12 11:56:35 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
cfb54f0263
Merge pull request #1638 from dhalbert/disable-SPIM3
...
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 10:57:56 -07:00
c4586c0531
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 08:31:03 -04:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
e3606461c5
Merge pull request #1558 from siddacious/bmp_bitdepths
...
initial support for additional bitdepths in OnDiskBitmap
2019-02-24 13:21:54 -05:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
d218069f03
Merge pull request #1584 from tannewt/disable_concurrent_write_protection
...
Add option to disable the concurrent write protection
2019-02-21 17:15:50 -05:00
ed1ace09e9
Fix unix build by using filesystem stub
2019-02-21 13:23:28 -08:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
5ec92415b0
fix module weak links; add missing nrf features
2019-02-17 17:29:28 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
72c03268a4
remove circuitpy_rules.mk; not used
2019-02-15 19:24:34 -05:00
5a32c88db3
merge from upstream and move ure options;make translate
2019-02-15 19:19:52 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
77ff17cc8d
atmel-samd: Enable extra ure functionality on Express boards
...
This enables ure.sub(), Match.span/start/end() and the
ure.Compile.search/match() pos/endpos arguments.
2019-02-14 15:42:46 +01:00
9cdffe5e8c
atmel-samd: Remove samd module from SAMD21 builds
...
Remove the samd module which has representations of the clocks.
This is done to save on precious flash.
2019-02-14 15:42:32 +01:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
a1a4959071
Merge pull request #1541 from dhalbert/nrf-two-uarts
...
nrf: Add second UARTE to busio.UART. Init uarts on startup.
2019-02-13 17:31:55 -08:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd.
2019-02-11 20:55:06 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
63d456127b
Merge pull request #1508 from adafruit/tannewt-patch-8
...
Fix up board build
2019-01-31 14:22:32 -05:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
323108e2ba
Merge pull request #1503 from hathach/nrf-tinyusb-sd
...
update tinyusb, work better with sd
2019-01-31 10:36:12 -05:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
a51f2b0716
refactor nrfx from supervisor/usb.c
2019-01-30 22:30:23 +07:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
d1fb384a4a
update tinyusb, work better with sd
2019-01-29 21:03:18 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
f46ec0253d
Merge pull request #1484 from larsks/issue/1483
...
tell people that esp8266 is no longer supported
2019-01-22 13:24:51 -08:00
3d3c50f927
tell people that esp8266 is no longer supported
...
Closes #1483
2019-01-22 15:40:00 -05:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
58a2009cc1
Fix unix build
2019-01-18 12:52:27 -08:00
0318a9a9bc
More make_new fixes for unix build
2019-01-18 11:53:09 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
076ddfd66b
Merge pull request #1474 from ladyada/master
...
more pyportal pins
2019-01-16 11:11:56 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
91452ec9cb
Mention the MDK USB Dongle.
2019-01-15 21:24:36 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
ee410b2cf1
Merge branch 'master' into nrf52_pulsein
2019-01-10 10:54:40 +07:00
d3b8581ce0
fix merge conflicts; address some comments
2019-01-09 19:59:48 -05:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
d41ed768dc
Fix sphinx build issues; add better travis fold reporting; update author info
2019-01-09 16:22:19 -05:00
89af666093
fix sphinx complaint; more travis fold status reporting
2019-01-09 10:36:38 -05:00
f366e3feea
Merge branch 'master' into nrf52_pulsein
2019-01-09 20:39:35 +07:00
cfc4c8cbfa
minor clean up
2019-01-09 15:43:54 +07:00
db82160eef
fix pulsein incorrect compute
2019-01-09 15:15:30 +07:00
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
13d607698e
m_tx_in_progress might underflow (check on this)
2019-01-08 16:37:14 -05:00
50641c4152
remove debugging printf's
2019-01-08 15:52:21 -05:00
f66f55b4ed
add CharacteristicBuffer; UART seems to work!
2019-01-07 22:46:20 -05:00
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
215008f78c
clean up neopixel write !!
2019-01-08 00:21:31 +07:00
a77b2363ef
evt handler list bugs; unique evt handler names; remove uuid128_reference
2019-01-03 21:42:42 -05:00
8dea6f53bb
forgot to store data when reading a gatts value
2019-01-03 14:16:41 -05:00
87c6f33bcc
Broadcaster now takes whole packet. Also should be scannable
2019-01-01 14:11:59 -05:00
941ccf87c8
don't free event handler list manually; let gc do it
2018-12-31 09:02:43 -05:00
b6b5ed9c89
Remove nRF52832 support
2018-12-30 22:49:20 -05:00
1dc3957e72
LocalPeripheral is now Peripheral; more work on basic GATTS support; UART not working yet
2018-12-30 22:33:49 -05:00
ef39e72c7c
free event handlers on reset; fix typo in Broadcaster
2018-12-29 13:55:10 -05:00
de7cadb9b2
fix typos in internal_flash.c
2018-12-29 00:08:04 -05:00
145e110915
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-29 00:00:39 -05:00
4d1f0ec07b
Add Broadcaster. Reset correctly on reload.
2018-12-28 23:34:23 -05:00
6b0d93cea3
correct i2c max len
2018-12-28 21:14:27 +07:00
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits)
2018-12-28 16:30:11 +07:00
3ee766bc01
put received bytes to fifo when error
2018-12-28 01:05:30 +07:00
d092722ae8
fix #1407 keep receiving in case of error
2018-12-28 00:40:29 +07:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
f5b15c9b4d
Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev
2018-12-21 21:28:24 -05:00
0dfe2dbff0
return error status on more routines; minor simplification of freq setting
2018-12-21 12:30:54 -05:00
bce6d124af
Don't check for corrupt heap too early; Fix QSPI timing
2018-12-20 21:28:36 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
6752266673
added pulsein using gpiote (gpio interrupt)
2018-12-18 22:05:17 +07:00
bfa66861ef
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-13 16:33:15 -05:00
b37b2fa7e7
overwrite old data if fifo is full
2018-12-13 23:56:06 +07:00
e136222ae2
use rbuf for busio uart
2018-12-13 23:48:53 +07:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
70939ad517
Merge pull request #1395 from jerryneedell/jerryn_cpython
...
enable MICROPY_CPYTHON_COMPAT
2018-12-11 10:54:17 -08:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
1dc4c4757e
touchio.TouchIn sensing working on a single pin! adafruit/circuitpython#1048
2018-12-11 14:33:35 +11:00
a90343022a
enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds
2018-12-10 16:35:40 -05:00
901db4797e
progress on NRF touchio.TouchIn #1048
2018-12-09 16:48:33 +11:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
a7a24096f4
bleio WIP: redo for more immutability; use sd_* routines for internal flash write
2018-12-07 16:52:47 -05:00
df84da5913
Stub out serial_write as well
2018-12-07 09:32:37 -08:00
808ca676b6
Fix unix
2018-12-06 17:12:30 -08:00
332ea8853f
Macro guard VDDH inclusion.
2018-12-06 16:38:14 -08:00
817766acdc
Use the stub for ESP8266 as well.
2018-12-06 15:47:16 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
125901e4e2
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-06 12:41:38 -05:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
452a622459
Set up structure for touchio adafruit/circuitpython#1048 (does nothing yet)
2018-12-04 17:12:02 +11:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
3fa8796668
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 15:01:03 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
09316b35d7
remove non-broken-out nrf pins. re-organize pins.c list.
2018-11-30 14:58:36 -07:00
6e15ab6385
Stop ignoring SD hex files and improve the error when its missing.
2018-11-30 13:26:12 -08:00
df18d22a93
Capture stderr as well and work on nRF build
2018-11-30 12:59:05 -08:00
f67814fc97
Adding SparkFun nRF52840 Mini board support.
2018-11-30 13:57:22 -07:00
cf70dc4f1c
Fix BLE build
2018-11-30 11:53:33 -08:00
56345ff997
A few tweaks based on review feedback
2018-11-30 10:58:27 -08:00
9d07e95351
Add support for adding release info into adafruit/circuitpython-org
...
This also changes the build script to python with better output.
2018-11-30 00:30:57 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
3164b16196
WIP: debug; add hash and __eq__ to UUID
2018-11-26 21:09:17 -05:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
6fb7590280
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-11-26 10:16:29 -05:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
52fd151c9c
ports/nrf: enable json module on nrf boards generally
2018-11-22 10:35:57 -06:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
1763ffe245
More UUID work; use mp_raise for exceptions
2018-11-20 23:04:58 -05:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
31cc71f7fb
WIP: bleio revisions
2018-11-20 09:36:45 -05:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
b67c53edfa
Factor out of external flash as well.
...
Plus some cleanup.
Fixes #1324
2018-11-14 18:30:47 -08:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
47212ee31e
start debug
2018-11-14 17:21:48 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
f24c225664
Merge pull request #1312 from dhalbert/adafruit_nrfx
...
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-11-04 11:42:12 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
e203ce9ce5
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-10-31 23:18:59 -04:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
554f82fe9b
Merge pull request #1286 from klardotsh/topic-nrf52840-mdk
...
Add support for MakerDiary nRF52840 MDK board
2018-10-22 17:47:14 -07:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
4bc24c4f60
bleio: Fix errors after rebase
2018-10-21 17:15:27 +02:00
eceb21a017
bleio: Don't register the services until needed
...
Because of the very specific way nRF requires service registration
(characteristics can be added only to last added service), we would
have to write the Python code in a specific way. With this patch the
user has more freedom.
2018-10-21 16:00:04 +02:00
19fab4af5a
bleio: Remove deep copy constructor for UUID
2018-10-21 15:59:50 +02:00
b5e5805bb4
bleio: Remove redundant struct field
2018-10-21 15:59:46 +02:00
c7b42d80b3
bleio: A bit of cleanup
2018-10-21 15:59:42 +02:00
cf79316002
nrf: Fix ble uart using the new API
2018-10-21 15:59:36 +02:00
d5a71a4b8a
nrf: Move bluetooth driver to the 'bluetooth' folder
2018-10-21 15:55:25 +02:00
17f13ecc2c
nrf: Cleanup of the ble driver
...
Moved the functions to classes that they belong to.
2018-10-21 15:54:13 +02:00
77eeecbfd9
nrf: BLE driver cleanup
2018-10-21 15:52:36 +02:00
6545aa99a9
nrf: Remove the ble drv specific characteristic struct
2018-10-21 15:51:04 +02:00
98aa8c5923
nrf: Remove the ble drv specific service struct
2018-10-21 15:51:01 +02:00
3df7dea2cc
nrf: Remove the ble drv specific advertisement data struct
2018-10-21 15:50:59 +02:00
4b344812bf
nrf: Remove the ble drv specific address struct
2018-10-21 15:50:56 +02:00
3bd65fbae5
nrf: Move the Peripheral class to bleio as Device
...
This was the last class from ubluepy and so that module is now gone.
The Device class offers both Peripheral and Central functionality.
See the inline docs for more info.
2018-10-21 15:50:45 +02:00
bda734223e
nrf: Move the Service class from ubluepy to the shared bleio module
2018-10-21 15:43:51 +02:00
cc78249226
nrf: Move the Characteristic class from ubluepy to the shared bleio module
2018-10-21 15:43:48 +02:00
61bf4a16a7
nrf: Remove unused ubluepy classes
2018-10-21 15:43:39 +02:00
1c6bf9a150
bleio: Move the Scanner class to a shared module
2018-10-21 15:43:29 +02:00
7390dc7dab
bleio: Move ScanEntry to shared module and add a new AdvertisementData class
2018-10-21 15:43:24 +02:00
345334aaf1
bleio: Add a new Address class
...
Use the new in the Adapter singleton.
2018-10-21 15:43:21 +02:00
d5f942a971
bleio: Add a AddressType enum-like class
2018-10-21 15:43:17 +02:00
20b8d5169d
nrf: Move the Descriptor class from ubluepy to the shared bleio module
2018-10-21 15:43:13 +02:00
f4940c9aec
nrf: Move the UUID class from ubluepy to the shared bleio module
...
Also added a UUIDType enum-like class for determining UUID type.
2018-10-21 15:43:08 +02:00
aefabc5353
Update docs to reflect proper size of device
2018-10-20 03:29:20 -07:00
4c75a60bd3
Declobber a DEFINE
2018-10-20 02:57:17 -07:00
16ca9c8c7c
Makefile fixes and some docs
2018-10-20 02:43:13 -07:00
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK
2018-10-20 02:43:12 -07:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
8161178415
Merge pull request #1275 from ElectronicCats/board-meowmeow
...
Added board Meow Meow by Electronic Cats
2018-10-17 11:41:57 -07:00
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
c69b67f453
Merge pull request #1277 from dhalbert/nrf-pulseout
...
PulseOut working
2018-10-16 10:19:55 -07:00
b3c7746a7f
fix copyright notice
2018-10-16 11:09:37 -04:00
2262efc311
PulseOut working
2018-10-16 11:05:02 -04:00
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
8b531f3fba
Merge pull request #1263 from tannewt/trellis_m4_revD
...
Support rev D for the Trellis M4 Express
2018-10-10 23:34:59 -04:00
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
e5d2fae801
Merge pull request #1261 from jepler/esp8266-prebuilt-sdk
...
esp8266/README: comment on the specific binary SDK used
2018-10-10 12:03:12 -07:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
8d58093328
Merge pull request #1259 from dhalbert/nrf-pwmout
...
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-10 12:27:27 -04:00
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
ca737e6f7c
Don't disable tempoarily in deinit().
2018-10-09 21:23:47 -04:00
012cc466a4
esp8266/README: comment on the specific binary SDK used
2018-10-09 20:17:38 -05:00
91a88cf568
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-09 20:52:55 -04:00
9f94712ad1
replacing change to input() with separate method to check for USB Serial input
2018-10-09 18:37:52 -04:00
a647ab83df
Merge remote-tracking branch 'adafruit/master' into mixer
2018-10-09 13:31:17 -07:00
a60700b1c5
Get DHCP working ...
2018-10-09 16:28:30 +11:00
6e624b9c6a
Split wiznet.WIZNET5K off into its own file
2018-10-09 13:05:58 +11:00
fd0ea85549
add force_create to nrf filesystem_init()
2018-10-06 08:03:27 -04:00
2b0356c61f
Disable framebuf by default on express builds.
2018-10-05 15:19:09 -07:00
76008ce304
Introduce audioio.Mixer which can mix multiple audio samples
...
to produce a single sample.
Only works with 16 bit samples on the M4.
Fixes #987
2018-10-05 15:12:23 -07:00
21ddb6b9b9
fix tinyusb cdc issue
2018-10-05 21:37:16 +07:00
091c5106ef
Cleanup Files
2018-10-04 21:26:28 -05:00
62d316bffb
W25Q16JV IQ and IM
...
Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.
2018-10-04 21:26:05 -05:00
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
f6b9f101dc
Added W25Q16JV_IM
...
Added new flash module: W25Q16JV_IM
2018-10-04 21:13:05 -05:00
15b59bee1b
change initialization method + mod_network names
2018-10-04 22:31:47 +10:00
f9bda0ff93
Makefile & mpconfigport for atmel-samd with wiznet
2018-10-04 22:02:25 +10:00
6049776b26
Merge branch 'master' into nrf52_uart_io
2018-10-03 13:31:48 -04:00
86ae707b08
Merge pull request #1223 from dhalbert/spi-baudrate
...
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
2018-10-03 10:11:44 -07:00
b8884ccc8b
Merge branch 'master' into nrf52_uart_io
2018-10-03 23:13:56 +07:00
d79b0a6b17
Merge pull request #1232 from platipo/master
...
Fix 'advertisement' typo
2018-10-03 09:14:28 -04:00
4b9099358f
Fix 'advertisement' typo
2018-10-03 09:56:30 +02:00
08cbb03bdd
implement common_hal_busio_uart_clear_rx_buffer
2018-10-03 11:39:01 +07:00
f543c8415d
"busio.UART not yet implemented -> not available
2018-10-03 11:30:31 +07:00
21d331c8cc
round SPI freq down; check max freq
2018-10-02 21:06:40 -04:00
036a1490e3
Merge pull request #1227 from tannewt/trellis_m4
...
Update Trellis M4 Express for Rev C
2018-10-02 20:33:27 -04:00
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
aa95526428
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
2018-10-01 18:54:13 -04:00
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
48a3aafdd2
reset I2C and SPI on ctrl-D
2018-09-25 15:12:10 -04:00
76d6fb03f0
more clean up
2018-09-26 02:12:06 +07:00
eba80f7a99
update translate string
2018-09-26 02:10:44 +07:00
52328c88cd
remove space
2018-09-26 02:06:32 +07:00
74cc55b107
change error type to runtime
2018-09-25 17:31:53 +07:00
f724647a45
fix feather nrf52840 build error
2018-09-25 17:09:54 +07:00
dec5c50c45
clean up
2018-09-25 16:22:14 +07:00
2f0e0bdcaf
migrate serial from uart to uarte
2018-09-25 16:14:44 +07:00
9017c9d29a
clean up
2018-09-25 14:29:45 +07:00
d3e5ba83eb
update nrfx to 1.3.0
2018-09-25 13:00:57 +07:00
d714479924
clean up
2018-09-25 12:48:48 +07:00
01c1296197
nrf52 uart io rx work reliably
2018-09-25 12:37:31 +07:00
1782ceab35
uarte malloc if buffer is not in SRAM
2018-09-24 16:18:49 +07:00
4015023e01
clean up uart io
2018-09-24 16:12:05 +07:00
7bbd449f06
uarte rx work fine
2018-09-24 15:54:32 +07:00
fdd3e91753
changing to nrf uarte, tx works fine
2018-09-24 14:56:52 +07:00
7a1b4ccc9b
Merge branch 'master' into nrf52_uart_io
2018-09-24 12:50:48 +07:00
f2c960e89b
Merge pull request #1205 from hathach/nrf52_autoreload
...
add autoreload for nrf52
2018-09-21 16:48:21 -04:00
e1fe7e71a1
add autoreload
2018-09-22 02:08:00 +07:00
a9d094ab74
Fix translations
2018-09-21 12:24:04 -04:00
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x
2018-09-21 12:22:26 -04:00
2c15d12f2f
allow multiple I2C and SPI; improve nrfx_config.h
2018-09-20 20:45:30 -04:00
816ff05253
clean up
2018-09-21 03:53:35 +07:00
dddc437ea7
got rx working finally
2018-09-21 03:48:13 +07:00
fe1a297889
still have issue with initial uart rx
2018-09-21 01:27:52 +07:00
2309e60c0d
WIP; problem with staticly allocated IRQ handlers
2018-09-19 21:59:04 -04:00
9c25306877
uart rx got some issue with irq
2018-09-20 02:12:21 +07:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
655f223916
Clock the SAMD21 much faster so it can actually convert at its max
...
sample rate of 350ksps.
Also added an error check of sample rate.
Fixes #1196
2018-09-18 15:29:46 -07:00
56b7f3ba64
fix translate omission; pca10059 fix in .travis.yml
2018-09-18 16:28:27 -04:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
7e8816ad6f
Add VOLTAGE_MONITOR alias to pin D31/A7
2018-09-13 23:46:47 +02:00
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements
...
UART enhancements
2018-09-12 16:23:28 -07:00
6a72084198
fix nrf builds; sphinx 1.8.0 crashing: use lower version
2018-09-12 18:37:03 -04:00
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk.
...
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.
Fixes #1182
2018-09-12 15:25:59 -07:00
6a046f55c4
UART fixes and enhancements; default board object fix
2018-09-12 17:19:43 -04:00
2bd7040fe0
usb_write() output_len was uint8_t instead of uint32_t
2018-09-12 17:16:52 -04:00
02b3f62460
When UART timeout of zero is given, make read() return data already available
2018-09-12 13:25:49 -04:00
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
c3918bae57
PWMOut was not claming channels on shared TCCs
2018-09-11 19:46:47 -04:00
2138b04e45
Update to IS25LP016D
...
Changed .supports_qspi_write to true.
2018-09-11 07:52:23 -05:00
c7cf38186d
Added IS25LP016D
2018-09-10 14:55:18 -05:00
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
1683eb913d
Minor tweaks based on feedback
2018-09-06 14:49:49 -07:00
100603a60b
neopixel_write merge; alphabetize stuff in Makefile
2018-09-05 17:38:59 -04:00
4c3b4cacfa
Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming
2018-09-05 13:15:22 -04:00
a0872e8761
Merge pull request #1161 from hathach/nrf52_neopixel
...
Nrf52 neopixel
2018-09-05 08:09:07 -04:00
ccd87a33b6
use nrf_pwm instead of direct registers
2018-09-05 13:18:36 +07:00
b5c03a7085
generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t
2018-09-04 16:43:21 -04:00
f4a98e909c
fix nrf52832 build 2
2018-09-04 23:25:08 +07:00
b9e8e3cd1f
fix nrf52832 build
2018-09-04 20:54:36 +07:00
1fe3ed87eb
run background job while waiting for neopixel write seqend
2018-09-04 19:24:45 +07:00
0d92c65829
correct disconnection check to only dtr
2018-09-04 18:36:08 +07:00
3ae24d9f9a
add neopixel_write implementation, work ok
2018-09-04 18:33:08 +07:00
e17253071e
adding neopixel write
2018-09-04 15:51:49 +07:00
2d3f1a10bf
When UART timeout of zero is given, make read() return data already available
2018-09-01 17:07:30 +00:00
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
0e8d146184
wip
2018-08-31 18:05:55 -04:00
121903b6ee
Tweaks based on feedback
2018-08-31 14:21:48 -07:00
6697544cdf
Introduce displayio to render graphics to displays.
...
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.
This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
2018-08-31 12:31:52 -07:00
93100a7517
Merge pull request #1146 from hathach/nrf52_usb_serial_bug
...
update tinyusb to fix #1007 serial issue
2018-08-28 15:39:34 -04:00
87811ec3a0
update readme board name feather_nrf52832
2018-08-28 16:15:20 +07:00
569a050e82
Merge pull request #1143 from notro/stat_epoch_fix
...
Fix os.stat() epoch and use RTC for file timestamp
2018-08-26 22:22:45 -07:00
ded38d30b6
rename pin.h to nrf_pin.h to avoid conflict with Pin.h
2018-08-26 20:37:12 -04:00
b61cf8d81f
samd: Use RTC to set file timestamp
...
Use RTC to set file timestamp for file operations done on the board.
2018-08-25 20:43:09 +02:00
e8b94d0024
adjust SAMD51 neopixel_write timing
2018-08-24 07:01:50 -04:00
4cc33f8de6
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
2018-08-23 16:25:57 -04:00
728622f09d
Merge pull request #1139 from hathach/nrf52_usb_serial
...
use unique DevicID for usb serial
2018-08-23 09:30:31 -04:00
4a8cd03de1
use unique DevicID for usb serial
2018-08-23 14:00:54 +07:00
fed1960424
remove s140 6.0.0 and s132 6.1.0 (not supported yet)
2018-08-23 00:27:39 +07:00
0c0ac06fc7
add SD 6.1.0 to download all
2018-08-22 23:09:09 +07:00
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
05ea9fd296
remove stray underscore
2018-08-22 10:26:52 -04:00
eaf4d19dbb
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
...
Merge #1137
2018-08-22 10:24:10 -04:00
a516d1123f
fix typos
2018-08-22 19:42:41 +07:00
02b1b53153
Merge branch 'master' into nrf52_dfu_touch1200
2018-08-22 15:24:12 +07:00
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
c503cf990b
forgot to change .travis.yml
2018-08-21 20:35:58 -04:00
85df32907f
rename nrf boards to feather_nrf52832 and feather_nrf52840_express
2018-08-21 18:45:37 -04:00
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
1c4accfa39
Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200
2018-08-21 15:17:03 +07:00
b7dd33b76e
add touch 1200 for dfu-flash
2018-08-21 15:15:44 +07:00
182a8d7120
Merge pull request #1131 from tannewt/hallowing3
...
Support Hallowing in 3.x
2018-08-20 18:26:07 -07:00
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff.
2018-08-20 18:04:35 -07:00
44de3d49a8
Speed up zero neopixel pulses.
...
SK6812 on 5v is pickier than WS2812 on 5v.
Hopefully fixes #1083 .
2018-08-20 17:04:46 -07:00
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-20 10:52:33 -07:00
1768057e87
add HalloWing
2018-08-20 10:52:24 -07:00
eefb6842a0
i2cslave: Fix missing translate() when raising exceptions
...
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
2018-08-18 16:00:06 +02:00
1a6f6ff8e4
Merge pull request #1122 from Jahor/patch-1
...
Fix PWM Support on port 1 of NRF52840
2018-08-17 16:54:03 -07:00
4a4d84ba42
Merge pull request #1064 from notro/i2cslave
...
Add busio.I2CSlave
2018-08-17 16:51:45 -07:00
18e9f74738
Fix PWM Support on NRF52840
...
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
2018-08-17 19:34:03 +12:00
e8cf6a9072
Update to merged peripheral change.
2018-08-16 18:05:53 -07:00
96534e598e
Fix unix coverage and update translations.
2018-08-16 17:41:53 -07:00
76e0373576
Fix nrf and unix
2018-08-16 17:41:38 -07:00
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
de5a9d72dc
Compress all translated strings with Huffman coding.
...
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.
Builds without LTO work as well but include both untranslated
strings and compressed strings.
This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531 .
2018-08-16 17:40:57 -07:00
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
b6822b86ac
busio/I2C: Split out samd_i2c_get_sercom()
...
It will be shared with I2CSlave.
2018-08-16 17:06:40 +02:00
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings
...
Fixes and translate more strings.
2018-08-09 20:00:18 -04:00
24e53ad591
Rework escaping and fix ESP build.
2018-08-09 15:58:45 -07:00
86d2154d71
Change file mode back.
2018-08-09 09:14:14 -07:00
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
b0e33f6a11
atmel-samd: UART: allocate rx buffer in long-lived region
...
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.
However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
2018-08-08 19:21:57 -05:00
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel
...
Retune neopixel timings on SAMD51. They were too slow.
2018-08-07 21:33:12 -04:00
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow.
...
Fixes #1083
2018-08-07 16:58:37 -07:00
933add6cd8
Support internationalisation.
2018-08-07 14:58:57 -07:00
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
64e5691fe7
Update to peripherals merge.
2018-08-02 13:59:12 -07:00
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity.
2018-08-02 11:07:22 -07:00
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing.
2018-08-02 00:51:52 -07:00
0bc3432106
Merge branch 'master' into nrf52_sys_module
2018-08-01 11:53:12 +07:00
65bd07bb0b
Merge pull request #1074 from hathach/nrf52840_usb_hid
...
Nrf52840 usb hid
2018-08-01 00:47:50 -04:00
592c190069
PR review clean up
2018-08-01 11:31:32 +07:00
8640d37149
try to address sys module, compile ok
2018-08-01 10:19:20 +07:00
200669216e
more clean up
2018-08-01 08:52:07 +07:00
bac233e99b
clean up
2018-08-01 08:47:41 +07:00
533d8dda96
fix samd usb hid typo
2018-08-01 08:40:04 +07:00
6ddd8583da
clean up
2018-08-01 08:20:20 +07:00
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-)
2018-07-31 12:42:21 -07:00
1e524f1b98
Merge branch 'master' into nrf52840_usb_hid
2018-08-01 00:58:23 +07:00
85bd46a4e1
enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS
2018-07-31 23:09:39 +07:00
4bece22c92
add hid keyboard LED indicator stub
2018-07-31 23:02:15 +07:00
05139e2aee
all hid devices seems to be ok
2018-07-31 22:54:26 +07:00
2c85f42330
add usb hid syscontrol
2018-07-31 21:57:00 +07:00
ef58adacd3
usb hid consumer control works
2018-07-31 21:19:02 +07:00
fd661c1d57
improve usb hid
2018-07-31 21:06:24 +07:00
b334289669
Reenable LTO for debug.
2018-07-31 05:18:23 -07:00
12cf5e51c2
Allow for resizing the stack area.
2018-07-31 05:18:23 -07:00
777542c716
Add basic memory allocation outside Python runtime
...
This allows for the heap to fill all space but the stack. It also
allows us to designate space for memory outside the runtime for
things such as USB descriptors, flash cache and main filename.
Fixes #754
2018-07-31 05:18:03 -07:00
27b2a9fe59
add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO
2018-07-31 17:50:32 +07:00
d15caf0dbd
hid keyboard and mouse work well
2018-07-31 16:42:04 +07:00
221d54a595
workaround to use lib/utils/interrupt_char.c
2018-07-31 14:28:34 +07:00
ae783b0b1a
update tinyusb, set scsi sense key for unsupported commands
2018-07-31 13:54:58 +07:00
a6d94b6845
Merge pull request #1068 from dhalbert/micropython-25ae98f-merge
...
Micropython 25ae98f
2018-07-30 12:33:44 -07:00
fbe98ff9a9
Merge pull request #1071 from dhalbert/3.x-hallowing
...
add HalloWing
2018-07-29 20:24:47 -04:00
680597547c
add HalloWing
2018-07-29 19:22:16 -04:00
bfbb5cde5a
put back test in qemu-arm build
2018-07-28 23:40:17 -04:00
2e260a0eab
Merge remote-tracking branch 'adafruit/master' into micropython-25ae98f-merge
2018-07-28 14:13:54 -04:00
f48b70050e
merge finished
2018-07-28 13:29:47 -04:00
368d59796f
adding usb_hid
...
compiled with undefined ref
2018-07-27 17:36:41 +07:00
21339c4155
house keeping
2018-07-27 17:22:21 +07:00
e86f7d0b88
add usb msc callback description
2018-07-27 00:17:14 +07:00
5bdf40901f
update tusb lib
2018-07-26 17:16:41 +07:00
bc760dd341
WIP: complete manual inspection of all significant changes
2018-07-23 21:34:25 -04:00
bb28faf39c
arturo182 review
2018-07-17 23:57:49 +07:00
a0b9871ba9
use seperate interrupt_char.c for nrf
...
move usb descriptors into usb.c
2018-07-17 21:52:20 +07:00
d4e84a9bd4
Merge branch 'master' into fix_nrf52840_serial
2018-07-17 21:27:16 +07:00
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
2809b4f9dd
Merge branch 'master' into micropython-25ae98f-merge
2018-07-16 19:36:40 -04:00
a20ab40ed2
Merge 3.0.0 final bugfixes and changes to master
2018-07-16 09:01:46 -04:00
e2e01efa84
compiles and runs; hangs on import storage;storage.VfsFat.<tab>
2018-07-13 22:51:10 -04:00
bfe14ff824
Merge pull request #1014 from arturo182/nrf_shared_ble
...
nrf: Split the ble module into a shared part and the port implementation
2018-07-13 10:23:37 -04:00
414267388d
Merge pull request #1023 from arturo182/nrf_pyocd
...
nrf: Fix flashing with pyocd
2018-07-13 10:02:20 -04:00
05c1384b67
nrf: Split the ble module into a shared part and the port implementation
...
This allows other ports to implement these shared bindings.
2018-07-13 16:01:15 +02:00
883ca21321
nrf: Fix flashing with pyocd
2018-07-13 15:22:46 +02:00
9729fc3d31
nrf: Fix BLE on nRF52840 after adding the USB functionality
2018-07-13 14:55:02 +02:00
7c219600a2
WIP: after merge; before testing
2018-07-11 16:45:30 -04:00
873e20273e
fix travis build
2018-07-12 02:17:55 +07:00
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
4962468fff
Merge pull request #1011 from arturo182/nrf_cleanup
...
nrf: More cleanup and porting
2018-07-10 15:44:30 -04:00
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
eab00ff140
nrf: Remove even more unused files
2018-07-10 14:59:22 +02:00
2c63fb2a94
nrf: Remove the random hal and module
...
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
2018-07-10 14:59:22 +02:00
1163462635
nrf: Remove the old time hal and replace with nRFx
2018-07-10 14:59:10 +02:00
e875f4e52e
Merge pull request #1002 from arturo182/nrfx_gpio
...
nrf: Rewrite the DigitalInOut hal using nRFx
2018-07-09 17:54:38 -07:00
8bb363f7c4
must set pull after setting direction with gpio_set_pin routines
2018-07-09 17:18:06 -04:00
0e819599e7
Merge branch 'master' into nrf52840_usbboot
2018-07-10 02:02:52 +07:00
7715d19efe
update bootloader hex
2018-07-10 01:20:37 +07:00
97a1ae911e
add family option for uf2
2018-07-10 01:18:14 +07:00
f199e87085
add ARRAY_SIZE
...
which is missing when building with debug mode
2018-07-10 01:06:57 +07:00
c5089d7274
generate uf2 by default
...
update tusb
2018-07-10 01:02:33 +07:00
64b9ee9c74
Merge pull request #985 from tannewt/heap_tweaks3
...
A few heap related tweaks
2018-07-08 23:21:38 -04:00
a45659c59a
Merge pull request #1000 from arturo182/nrfx_uart
...
nrf: Rewrite the UART HAL using nRFx
2018-07-08 20:17:47 -07:00
133b99b6f2
Merge pull request #999 from arturo182/nrf_mphalport
...
nrf: mphalport cleanup
2018-07-08 20:13:21 -07:00
fd5634e4aa
Merge pull request #992 from arturo182/nrf_i2c_fix
...
nrf: Fix I2C transfers with data larger than HW allows
2018-07-08 20:12:09 -07:00
388f554ff6
nrf: Rewrite the DigitalInOut hal using nRFx
2018-07-08 17:48:32 +02:00
25ece8fb3d
nrf: Rewrite the UART HAL using nrfx
2018-07-08 16:42:04 +02:00
c6a2a55bc9
nrf: Cleanup mpconfigboard files
...
All the removed defines were used by legacy modules that are now
removed.
2018-07-08 15:18:11 +02:00
887486582e
nrf: Remove port-specific help
...
It contains mentions to the pyb module which was removed.
The ble-specific help will be re-added later when the API
is stabilized.
2018-07-08 15:18:11 +02:00
1ea633c484
nrf: mphalport cleanup
2018-07-08 14:39:30 +02:00
da27253693
nrf: Fix I2C transfers with data larger than HW allows
2018-07-06 21:12:24 +02:00
ac74edb4e4
nrf: Fix SPI transfers with data larger than HW allows
2018-07-06 21:10:25 +02:00
baf68a936e
remove hal_time files
2018-07-06 15:59:20 +07:00
3e319694aa
mp_hal_delay_ms() to call background task
...
remove hal_time.c
2018-07-06 15:48:01 +07:00
948ddf8463
make SD default to s140 and s132 for nrf52840 and nrf52832
...
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
2018-07-06 14:39:49 +07:00
6ef3a0b181
implement filesystem_writable_by_python()
2018-07-06 13:01:07 +07:00
54179a0189
Use .s in samd Makefile too.
2018-07-05 04:44:00 -07:00
0806c0a38b
update fatfs cached sector when running write10
2018-07-05 17:43:38 +07:00
4e5d9a029d
clean up
2018-07-05 17:26:07 +07:00
0365912e28
implement msc with internal_flash api
...
Note: only work with SD is disabled.
2018-07-05 16:19:04 +07:00
3564e98181
implement msc flash, seems to work
2018-07-05 15:22:23 +07:00
1745e20391
replace jlink with native usb cdc for serial REPL
2018-07-05 11:30:12 +07:00
be2ff20e42
enable usb cdc interface
...
not handle anything yet.
2018-07-04 17:15:49 +07:00
7fff7f5e70
add usb msc support for nrf52840
2018-07-04 16:40:53 +07:00
8fb976f0bd
Split out assembly source files.
2018-07-03 07:25:54 -07:00
d9723bb613
include RTC fix for SAMd51 in circuitpython build
2018-07-03 06:52:05 -07:00
074c5ea144
Merge pull request #977 from dhalbert/update_crickit_libs-2
...
update crickit-related libs
2018-07-03 12:04:05 -07:00
bf9981e8db
bring all frozen libraries up to date
2018-07-03 14:39:21 -04:00
dbc977485c
Support gathering register values on nrf.
2018-07-03 06:31:07 -07:00
ec78d3cefd
Mark pointers in cpu registers as in use.
...
This prevents bugs where gc_collect is called from C code that did
a recent allocation.
2018-07-03 05:45:50 -07:00
46c453cf0a
add tinyusb as submodule
2018-07-03 17:46:08 +07:00
b14b28067e
Merge branch 'master' into nrf52840_usbboot
2018-07-03 17:29:28 +07:00
bf00cde37d
Comment tweak after board change
2018-07-02 14:51:06 -07:00
b91202969a
Merge pull request #982 from arturo182/nrf_makefile
...
nrf: Save some flash bytes by using extra compile flags
2018-07-02 14:33:47 -07:00
05a088b369
Merge pull request #972 from arturo182/nrf_i2c
...
nrf: Rewrite the I2C common-hal using nrfx
2018-07-02 14:33:06 -07:00
da491ec961
nrf: Save some flash bytes by using extra compile flags
...
Both of these are used in the atsamd port as well.
2018-07-02 22:00:04 +02:00
7c9a0e2996
remove unnecessary extern in nrf/mphalport.c
2018-06-29 16:06:51 -04:00
7028a399c2
remove previously added esp8266/mphalport.{c,h}
2018-06-29 16:04:18 -04:00
2a0b857643
implement mp_hal_delay_us() to not need interrupts, and use it
2018-06-29 16:01:46 -04:00
df4469f92b
Test the BOARD parameter for nullness; display a error if nothing provided
2018-06-29 12:22:31 -07:00
d392f01f2c
include RTC fix for SAMd51 in circuitpython build
2018-06-29 05:45:38 -07:00
b4fd77bb7c
fix nrf and esp8266 builds for OneWire fix
2018-06-29 00:00:05 -04:00
52a11547cb
fix OneWire timing and DigitalInOut.switch_to_input()
2018-06-28 23:32:20 -04:00
429168d4ac
Merge pull request #970 from arturo182/nrf_softdev
...
nrf: Remove unsupported softdevice defines
2018-06-28 14:01:19 -07:00
007155276a
Merge pull request #969 from arturo182/nrf_more_commonhal
...
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
2018-06-28 14:00:45 -07:00
039b4dc00a
Merge pull request #968 from arturo182/nrf_qstr
...
nrf: Remove old qstr defines
2018-06-28 13:57:46 -07:00
ae82a93b56
Merge pull request #967 from arturo182/nrf_os
...
nrf: Rewrite the os common-hal using nrfx
2018-06-28 13:55:34 -07:00
178c089045
nrf: Rewrite the I2C common-hal using nrfx
2018-06-28 22:45:02 +02:00
6e6a500801
nrf: Rewrite the os common-hal using nrfx
2018-06-27 21:01:07 +02:00
af5cb9c492
nrf: Remove unneeded hal files
2018-06-27 21:00:34 +02:00
b87bba8a28
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
2018-06-27 20:55:29 +02:00
1fa8fac5d7
nrf: Remove old qstr defines
...
These were used by the microbit music module, which was removed.
2018-06-27 20:52:13 +02:00
b9f02ca3c5
nrf: Remove unsupported softdevice defines
2018-06-27 20:48:57 +02:00
2a12fcd18b
nrf: Rewrite the AnalogIn common-hal using nrfx
2018-06-27 20:41:30 +02:00
c4f11dfd32
flash target update bootloader setting to skip crc checksum
2018-06-27 15:22:44 +07:00
8fbe1d73e9
clean up makefile
2018-06-27 15:13:20 +07:00
4920cc47ca
move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it
2018-06-27 14:31:08 +07:00
bed7310fd7
update bin files
2018-06-27 14:13:18 +07:00
ecd3993d43
update pin map for feather52840
2018-06-27 14:06:15 +07:00
1f3de5174e
Freeze Adafruit_CircuitPython_Crickit into crickit builds
2018-06-26 19:49:55 -04:00
91427b0b23
Merge pull request #959 from arturo182/nrf_spim
...
nrf: Rewrite the SPI common-hal using nrfx
2018-06-26 11:00:12 -07:00
d7d132d5a3
Merge pull request #960 from arturo182/nrf_stm_cleanup
...
nrf: Remove leftovers from stm32 code copy
2018-06-26 10:52:04 -07:00
16973d0559
nrf: Remove unused hal files
...
Makes it easier to keep track of what's left to rewrite.
2018-06-26 00:13:41 +02:00
2f1e678d60
nrf: Rewrite the SPI common-hal using nrfx
...
Use SPIM2 on nRF52832 and SPIM3 on nRF52840. SPIM3 is able to go
up to 32MHz!
2018-06-25 23:46:34 +02:00
b14d13e318
nrf: Remove leftovers from stm32 code copy
2018-06-25 23:38:10 +02:00
8d065fe0e6
update reamde
2018-06-26 00:16:58 +07:00
54547683f9
add uf2, bootloader target
2018-06-25 23:31:14 +07:00
4722371be9
update bootloader hex with uf2
2018-06-25 23:27:00 +07:00
f5be5ed6ee
Merge branch 'master' into nrf52840_usbboot
2018-06-25 17:12:24 +07:00
596a1d8843
nrf: Rename feather52 to feather52832 in readme files
2018-06-22 10:04:39 +02:00
a2ac7e4fc9
stm32/boards: Add .ld and af.csv files for STM32F722.
...
These files can also be used for F723, F732 and F733 MCUs.
2018-06-22 15:39:10 +10:00
ec7982ec6d
stm32/mboot: Add support for erase/read/write of external SPI flash.
...
This patch adds support to mboot for programming external SPI flash. It
allows SPI flash to be programmed via a USB DFU utility in the same way
that internal MCU flash is programmed.
2018-06-22 15:30:34 +10:00
7f41f73f0f
stm32/qspi: Don't require data reads and writes to be a multiple of 4.
...
Prior to this patch the QSPI driver assumed that the length of all data
reads and writes was a multiple of 4. This patch allows any length. Reads
are optimised for speed by using 32-bit transfers when possible, but writes
always use a byte transfer because they only use a single data IO line and
are relatively slow.
2018-06-22 15:07:01 +10:00
de4cd1ee73
add pins D3/D4 to pins.c
...
fixes #948
2018-06-20 22:26:59 -04:00
25e71a56d4
nrf: Update the PCA10056 example to use new pin naming
2018-06-20 23:39:36 +02:00
deec17e4fe
nrf: Remove really old examples
...
These examples rely on machine and pyb modules, so they have to get.
Leaving 3 BLE examples that also rely on those modules, but can be
fixed to use CP's modules.
2018-06-20 23:38:18 +02:00
9c08db55ff
nrf: Cleanup machine and microbit leftovers
...
The music module was useful when this port had support for the
microbit, now that it was removed, it's not so useful.
2018-06-20 23:30:34 +02:00
c2d4d0a10b
nrf: Simplify pin generation and definition
...
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
2018-06-20 23:26:32 +02:00
ff918556cd
nrf: Simplify the board makefiles
...
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
2018-06-20 21:21:45 +02:00
5509f394dc
nrf: Add a nrfx submodule and prepare for using the new drivers
2018-06-20 20:43:59 +02:00
7cd34f2a94
nrf: Cleanup Makefile after nrf51 removal
2018-06-20 18:21:18 +02:00
97f10241f9
nrf: Fix default board after feather52 rename
2018-06-20 18:21:18 +02:00
b47a67d566
nrf: Remove machine, pyb and utime modules
...
Micropython legacy, keeping it consistent with atsam port.
2018-06-20 18:21:18 +02:00
80d16cb7df
add pins D3/D4 to pins.c
...
fixes #948
2018-06-19 22:34:29 -04:00
561ae9a91b
stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio.
...
Fixes issue #3880 .
2018-06-20 12:24:18 +10:00
5962c210c5
stm32/mboot: Define constants for reset mode cycling and timeout.
...
And fix timeout value so that it does actually finish with reset_mode=1.
2018-06-19 23:23:17 +10:00
61437106e7
update bootloader for feather nrf52840
2018-06-19 15:27:07 +07:00
6d2702ed98
Merge branch 'master' into nrf52840_usbboot
2018-06-19 14:50:17 +07:00
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6
...
nrf: Use the production version of s140 6.0.0
2018-06-18 16:29:41 -07:00
feee808955
nrf: Use the production version of s140 6.0.0
2018-06-18 23:12:28 +02:00
05547b72ac
Switch to Feather52s full name to avoid confusion with the nrf52840 later.
...
Fixes #940
2018-06-18 10:51:04 -07:00
e49cd106b4
stm32/spi: Fix SPI driver so it can send/recv more than 65535 bytes.
...
The DMA peripheral is limited to transferring 65535 elements at a time so
in order to send more than that the SPI driver must split the transfers up.
The user must be aware of this limit if they are relying on precise timing
of the entire SPI transfer, because there might be a small delay between
the split transfers.
Fixes issue #3851 , and thanks to @kwagyeman for the original fix.
2018-06-18 17:41:14 +10:00
338af99a7f
stm32/can: Use MP_OBJ_ARRAY_TYPECODE_FLAG_RW where appropriate.
2018-06-18 13:42:05 +10:00
ca2b1d6b36
stm32/boards/NUCLEO_F091RC: Add Arduino-named pins and rename CPU pins.
...
To match pin labels on other NUCLEO 64 boards.
2018-06-18 13:06:27 +10:00
0d3de68669
stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs.
2018-06-18 13:05:24 +10:00
a5f5552a0a
tests/unix/extra_coverage: Don't test stream objs with NULL write fun.
...
This behaviour of a NULL write C method on a stream that uses the write
adaptor objects is no longer supported. It was only ever used by the
coverage build for testing the fail path of mp_get_stream_raise().
2018-06-18 12:35:56 +10:00
ceff433fcc
stm32/mboot: Adjust user-reset-mode timeout so it ends with mode=1.
...
If the user button is held down indefinitely (eg unintenionally, or because
the GPIO signal of the user button is connected to some external device)
then it makes sense to end the reset mode cycle with the default mode of
1, which executes code as normal.
2018-06-18 12:23:27 +10:00
be5eb91df8
Merge pull request #938 from sommersoft/esp_busio_fix
...
ESP8266: Fix pin locking during busio.SPI.configure
2018-06-16 11:49:20 -04:00
a5e03b76a6
Split out the peripherals library in preparation of sharing with MakeCode.
2018-06-15 16:16:21 -07:00
9fc0ec6af8
Merge pull request #934 from microbuilder/usbboot
...
[WIP] nRF52840 USB Bootloader
2018-06-15 09:35:30 -07:00
34b2f6b6fc
esp32/modules: Include umqtt library in frozen modules.
2018-06-15 16:39:49 +10:00
d61d119c94
esp32: Update to latest ESP IDF.
2018-06-15 16:23:53 +10:00
23b6d33455
fixes #642 ; spi_init_gpio() is now bypassed for both construct and configure
2018-06-15 05:03:52 +00:00
7be4a23c0c
stm32/i2cslave: Fix ordering of event callbacks in slave IRQ handler.
...
It's possible (at least on F4 MCU's) to have RXNE and STOPF set at the same
time during a call to the slave IRQ handler. In such cases RXNE should be
handled before STOPF so that all bytes are processed before
i2c_slave_process_rx_end() is called.
2018-06-15 14:15:31 +10:00
bc5e8a2cb6
stm32/i2c: Fix num_acks calculation in i2c_write for F0 and F7 MCU's.
...
Due to buffering of outgoing bytes on the I2C bus, detection of a NACK
using the ISR_NACKF flag needs to account for the case where ISR_NACKF
corresponds to the previous-to-previous byte.
2018-06-15 14:10:53 +10:00
fa814a32ce
Make Trinket M0 build fit; make RAMFS in vfs_fat_* tests be compliant with expected API
2018-06-14 21:02:12 -04:00
37a7257aff
stm32/timer: Support TIM1 on F0 MCUs.
2018-06-15 10:50:08 +10:00
e724bc1c4e
Fix playing audio from SD card
2018-06-14 18:47:40 -04:00
cc5a94044a
drivers/memory/spiflash: Rename functions to indicate they use cache.
...
This patch renames the existing SPI flash API functions to reflect the fact
that the go through the cache:
mp_spiflash_flush -> mp_spiflash_cache_flush
mp_spiflash_read -> mp_spiflash_cached_read
mp_spiflash_write -> mp_spiflash_cached_write
2018-06-14 16:52:56 +10:00
335d26b27d
stm32/boards/STM32L476DISC: Update SPI flash config for cache change.
2018-06-14 16:52:56 +10:00
35d38dbfed
update nrf52840 bootloader hex
2018-06-13 17:27:55 +07:00
cf1509c911
esp32/fatfs_port: Implement get_fattime so FAT files have a timestamp.
...
Fixes issue #3859 .
2018-06-13 14:13:34 +10:00
618943d90a
Merge pull request #926 from nickzoic/circuitpython-nickzoic-716-pulseio-esp8266
...
Implement pulseio.PulseIn and PulseOut for ESP8266 #716
2018-06-12 18:33:16 -07:00
ee817a2fa8
Correct UART reads to return error on timeout.
...
This causes read to correctly return None instead of b''.
Fixes #874
2018-06-12 14:03:27 -07:00
4691b30c02
PDMIn: turn serializer on when starting DMA
2018-06-12 12:35:51 -04:00
5042d98514
stm32/Makefile: Rebuild all qstrs when any board configuration changes.
2018-06-12 13:53:43 +10:00
0501427907
esp32: Remove port-specific uhashlib implementation and use common one.
...
Now that the common module has mbedtls support for both SHA1 and SHA256 it
can now be used on this port.
2018-06-12 13:50:11 +10:00
565f590586
ports: Enable IOBase on unix, stm32, esp8266 and esp32.
...
It's a core feature, in particular required for user-streams with uasyncio.
2018-06-12 12:29:26 +10:00
b2fa1b50ed
ports: Call gc_sweep_all() when doing a soft reset.
...
This calls finalisers of things like files and sockets to cleanly close
them.
2018-06-12 11:56:25 +10:00
73dadb0669
Update to the latest ASF4 which includes an I2C timeout extension while waiting for clock stretching.
...
Fixes #778
2018-06-11 18:37:48 -07:00
068ffd04a6
Merge pull request #919 from adafruit/jerryneedell-patch-2
...
fix #918
2018-06-10 09:17:49 -04:00
f72dcc64e6
Fixes #918 (PulseIn.get_paused) ...
2018-06-10 22:37:15 +10:00
b25cbd340b
Merge commit '2129bbe160278f7cd2cece939f81900a41f8aa86' into circuitpython-nickzoic-716-pulseio-esp8266
2018-06-10 22:08:58 +10:00
972b03850f
Merge branch 'master' into circuitpython-nickzoic-716-pulseio-esp8266
2018-06-10 22:01:35 +10:00
8150150a24
return "false" for stub call
...
See #918 for discussion
2018-06-10 07:11:44 -04:00
2129bbe160
Update PulseIn.c
2018-06-10 07:08:56 -04:00
5724fd795a
fix #918
...
Add stub for common_hal_pulseio_pulsein_get_paused to make ESP8266 build compatible with PR #901
2018-06-10 05:59:20 -04:00
b2d98edb4e
Merge pull request #901 from tannewt/pulseio_too_fast
...
Prevent freezing USB during high frequency PulseIn.
2018-06-08 17:59:06 -04:00
8fb34a5846
Use bool not int.
2018-06-08 14:57:20 -07:00
8195df1b55
Stub out get_paused in nrf builds.
2018-06-08 14:01:54 -07:00
66b79723b6
Add code size analysis tool and shrink samd.clock a smidge.
2018-06-08 12:56:32 -07:00
769788d3c7
Turn off USB pin objects since they are always used for USB.
2018-06-08 12:56:32 -07:00
383bf9a59e
Wait for the DFLL to be stable.
2018-06-08 12:56:32 -07:00
07a8899c72
Support M4
2018-06-08 12:56:32 -07:00
2fbab8067a
Prevent freezing USB during high frequency PulseIn.
...
We now track the last time the background task ran and bail on the
PulseIn if it starves the background work. In practice, this
happens after the numbers from pulsein are no longer accurate.
This also adjusts interrupt priorities so most are the lowest level
except for the tick and USB interrupts.
Fixes #516 and #876
2018-06-08 12:56:32 -07:00
218930d18b
Check for PDMIn DMA getting stuck.
2018-06-08 08:23:52 -04:00
418e28c7dc
update nrf52840 bootloader hex and target
2018-06-08 16:10:49 +07:00
2b3436e87c
add feather nrf52 uart rts, cts support
2018-06-08 15:59:38 +07:00
c10899d13f
allow to flash feather52 and feather52840 with jlink
...
add crc bypass magic to bootloader settting
2018-06-08 15:11:17 +07:00
6af1fbacc9
Work on pulseio.PulseOut for #716 ESP8266
...
Switch to ets_delay_us but the PWM is still way too slow to be useful.
2018-06-08 16:41:42 +10:00
011edf2472
Clean up interrupt handling for pulseio.PulseIn implementation for #716 ESP8266
2018-06-08 15:31:16 +10:00
24c416cc66
stm32/mboot: Increase USB rx_buf and DFU buf sizes to full 2048 bytes.
...
The DFU USB config descriptor returns 0x0800=2048 for the supported
transfer size, and this applies to both TX (IN) and RX (OUT). So increase
the rx_buf to support this size without having a buffer overflow on
received data.
With this patch mboot in USB DFU mode now works with dfu-util.
2018-06-08 15:29:52 +10:00
c4cf1c5221
Initial pulseio.PulseOut implementation for #716 ESP8266
2018-06-08 15:28:05 +10:00
7adc69baf9
Initial pulseio.PulseIn implmentation for #716 ESP8266
2018-06-08 15:27:59 +10:00
039f196c56
esp32/modnetwork: Fix isconnected() when using static IP config.
...
Currently <WLAN>.isconnected() always returns True if a static IP is set,
regardless of the state of the connection.
This patch introduces a new flag 'wifi_sta_connected' which is set in
event_handler() when GOT_IP event is received and reset when DISCONNECTED
event is received (unless re-connect is successful). isconnected() now
simply returns the status of this flag (for STA_IF).
The pre-existing flag misleadingly named 'wifi_sta_connected" is also
renamed to 'wifi_sta_connect_requested'.
Fixes issue #3837
2018-06-08 13:13:21 +10:00
190c7dba89
stm32/mpconfigport.h: Enable DELATTR_SETATTR and BUILTINS_NOTIMPLEMENTED
...
MICROPY_PY_DELATTR_SETATTR can now be enabled without a performance hit for
classes that don't use this feature.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED is a minor addition that improves
compatibility with CPython.
2018-06-08 12:55:18 +10:00
93150a0d40
ports: Enable descriptors on stm32, esp8266, esp32 ports.
...
They are now efficient (in runtime performance) and provide a useful
feature that's hard to obtain without them enabled.
See issue #3644 and PR #3826 for background.
2018-06-08 12:23:08 +10:00
ba7e0e2f86
Add Adafruit to other M4 board name strings
2018-06-07 13:39:04 -04:00
7b2875d54a
Add Adafruit to board name string
2018-06-07 13:33:13 -04:00
0ab2a60dcd
Update ItsyBitsy board name to one word
2018-06-07 13:12:44 -04:00
c854e2dc17
Merge branch 'master' into usbboot
2018-06-07 13:51:21 +07:00
9bb4ded5fa
Merge remote-tracking branch 'upstream/master'
2018-06-07 13:50:04 +07:00
fadd6bbe43
unix/moduos_vfs: Add missing uos functions from traditional uos module.
...
Now that the coverage build has fully switched to the VFS sub-system these
functions were no longer available, so add them to the uos_vfs module.
Also, vfs_open is no longer needed, it's available as the built-in open.
2018-06-06 14:28:23 +10:00
1d40f12e44
unix: Support MICROPY_VFS_POSIX and enable it in coverage build.
...
The unix coverage build is now switched fully to the VFS implementation, ie
the uos module is the uos_vfs module. For example, one can now sandbox uPy
to their home directory via:
$ ./micropython_coverage
>>> import uos
>>> uos.umount('/') # unmount existing root VFS
>>> vfs = uos.VfsPosix('/home/user') # create new POSIX VFS
>>> uos.mount(vfs, '/') # mount new POSIX VFS at root
Some filesystem/OS features may no longer work with the coverage build due
to this change, and these need to be gradually fixed.
The standard unix port remains unchanged, it still uses the traditional uos
module which directly accesses the underlying host filesystem.
2018-06-06 14:28:23 +10:00
f35aae366c
extmod/vfs_fat: Rename FileIO/TextIO types to mp_type_vfs_fat_XXX.
...
So they don't clash with other VFS implementations.
2018-06-06 14:28:23 +10:00
9ba6990228
Feather M0 Express build with Crickit libraries
2018-06-05 18:21:47 -04:00
74ced174ce
Merge pull request #898 from dhalbert/feather_m4_d4
...
add PA14 as D4 to Feather M4 Express
2018-06-05 11:41:31 -04:00
7e7e33e460
add PA14 as D4 to Feather M4 Exprses
2018-06-05 08:15:34 -04:00
aace60a75e
esp8266/modules/ntptime.py: Remove print of newly-set time.
...
It should be up to the user if they want to print the new time out or not.
Fixes issue #3766 .
2018-06-05 14:30:35 +10:00
a90124a9e2
esp32: Add support for building with external SPI RAM.
...
This patch adds support for building the firmware with external SPI RAM
enabled. It is disabled by default because it adds overhead (due to
silicon workarounds) and reduces performance (because it's slower to have
bytecode and objects stored in external RAM).
To enable it, either use "make CONFIG_SPIRAM_SUPPORT=1", or add this line
to you custom makefile/GNUmakefile (before "include Makefile"):
CONFIG_SPIRAM_SUPPORT = 1
When this option is enabled the MicroPython heap is automatically allocated
in external SPI RAM.
Thanks to Angus Gratton for help with the compiler and linker settings.
2018-06-05 13:57:59 +10:00
bc92206f89
esp32/Makefile: Extract common C & C++ flags for consistent compilation.
2018-06-05 13:05:12 +10:00
0c7c0821fc
Merge pull request #891 from godlygeek/low_flash_errno_fixes
...
Human readable OSError messages for low flash devices
2018-06-04 17:22:57 -07:00
df13ecde06
cc3200/mods: Include stream.h to get definition of mp_stream_p_t.
2018-06-04 16:58:45 +10:00
309fe39dbb
stm32/modnetwork: Fix arg indexing in generic ifconfig method.
2018-06-03 21:50:49 +10:00
d0e6bb269f
Use the system errno's on nrf
2018-06-02 12:55:07 -04:00
e580d22f4a
Use the external crystal on SAMD21 again.
...
Also, re-enable calibration storage for CircuitPlayground Express.
Tested with a 500hz PWMOut on Metro M0 with Saleae:
* with crystal 500hz
* with usb 500hz +- 0.1hz
* without either 487hz += 0.1hz
SAMD51 is skipped due to DFLL errata and the fact it defaults to a
factory calibrated 48mhz that works fine for USB.
Fixes #648
2018-06-01 18:01:42 -07:00
22f4438787
Prune atmel-samd errno list
...
Remove errnos that are only raised by modules that aren't linked into
the atmel-samd port.
2018-06-01 19:04:14 -04:00
e798b67ca2
Begin a custom list of errnos for atmel-samd
...
The uerrno module was written to allow boards to customize the list of
errnos they can raise. Start by copying the default list.
2018-06-01 19:04:04 -04:00
717199018b
Adapt for feedback and hack around pIRkey size constraint.
2018-06-01 15:08:52 -07:00
f386144428
redo state algorithm
2018-06-01 15:08:52 -07:00
9920f0a5de
atmel-samd: Make ticks more atomic.
...
Always use current_tick when sub millisecond precision is required.
Otherwise getting the ms/us to correspond is tricky.
2018-06-01 15:08:52 -07:00
d0fb6e7a2f
atmel-samd: Add rotary encoder support.
...
Fixes #283
2018-06-01 15:08:48 -07:00
fd71e56891
atmel-samd: Re-org helper peripheral files into their own subdirectory.
...
Ideally in the future they won't depend on ASF4 or MicroPython.
2018-06-01 15:07:31 -07:00
ae31c4ac18
Merge pull request #889 from tannewt/audioio_timers_in_use
...
Turn off timer on AudioOut deinit.
2018-06-01 18:03:29 -04:00
ea95eb730a
Merge pull request #890 from tannewt/brownout3
...
Support brownout to safe mode. Fixes #870
2018-06-01 18:02:13 -04:00
f38ce1060c
Support brownout to safe mode. Fixes #870
2018-06-01 13:45:28 -07:00
bf1f0b3d11
Turn off timer on AudioOut deinit.
...
Thanks to @sommersoft for spotting the error.
Fixes #850
2018-06-01 13:32:45 -07:00
e158702a68
atmel-samd/samd51: Use crystal for RTC
...
This uses the crystal to clock the RTC on boards which have a crystal.
Disable clock generator 2 which was enabled in commit
8e2080411f
2018-06-01 18:03:23 +02:00
ab7ddfddd5
atmel-samd/samd51: Refactor clock setup
...
Refactor the convoluted asf4 clock setup into something more readable.
enable_clock_generator() has 2 changes:
- Set 'Output enabled' to match the current clock setup
- Handle divisors above 511
Add an enable_clock_generator_sync() version which makes it possible to setup
clocks without waiting for syncing. The bootup would hang without this.
I have checked these registers:
NVMCTRL->CTRLA = 0x00000004
Peripheral clocks (only non-zero shown):
PCHCTRL[1]=0x00000045
PCHCTRL[10]=0x00000041
Generator clocks (only non-zero shown):
GENCTRL[0] = 0x00010907
GENCTRL[1] = 0x00010906
-GENCTRL[2] = 0x00041104
+GENCTRL[2] = 0x00200904
GENCTRL[4] = 0x00010907
GENCTRL[5] = 0x00180906
DFLL clock:
OSCCTRL->DFLLCTRLA = 0x00000082
OSCCTRL->DFLLCTRLB = 0x00000000
OSCCTRL->DFLLVAL = 0x00008082
OSCCTRL->DFLLMUL = 0x00000000
DPLL clocks:
OSCCTRL->Dpll[0].DPLLCTRLA=0x00000002
OSCCTRL->Dpll[0].DPLLCTRLB=0x00000000
OSCCTRL->Dpll[0].DPLLRATIO=0x0000003b
OSCCTRL->Dpll[1].DPLLCTRLA=0x00000080
OSCCTRL->Dpll[1].DPLLCTRLB=0x00000020
OSCCTRL->Dpll[1].DPLLRATIO=0x00000000
OSC32KCTRL clock:
OSC32KCTRL->RTCCTRL = 0x00000000
OSC32KCTRL->XOSC32K = 0x00002082
OSC32KCTRL->CFDCTRL = 0x00000000
OSC32KCTRL->EVCTRL = 0x00000000
OSC32KCTRL->OSCULP32K = 0x00002300
Only gen2 changed which is due to samd51 having more bits in the simple
division register so DIVSEL wasn't necessary, and it didn't have OE set.
2018-06-01 18:02:35 +02:00
5c6aea9fd8
atmel-samd/samd51: Implement samd.clock
...
Fill out the dummy implementation.
2018-06-01 18:01:08 +02:00
7d86ac6c01
stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP.
...
The Wiznet5k series of chips support a MACRAW mode which allows the host to
send and receive Ethernet frames directly. This can be hooked into the
lwIP stack to provide a full "socket" implementation using this Wiznet
Ethernet device. This patch adds support for this feature.
To enable the feature one must add the following to mpconfigboard.mk, or
mpconfigport.mk:
MICROPY_PY_WIZNET5K = 5500
and the following to mpconfigboard.h, or mpconfigport.h:
#define MICROPY_PY_LWIP (1)
After wiring up the module (X5=CS, X4=RST), usage on a pyboard is:
import time, network
nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
nic.active(1)
while not nic.isconnected():
time.sleep_ms(50) # needed to poll the NIC
print(nic.ifconfig())
Then use the socket module as usual.
Compared to using the built-in TCP/IP stack on the Wiznet module, some
performance is lost in MACRAW mode: with a lot of memory allocated to lwIP
buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared
with 1M/sec when using the TCP/IP stack on the Wiznet module.
2018-06-01 14:21:38 +10:00
d9f1ecece2
stm32/modnetwork: Provide generic implementation of ifconfig method.
...
All it needs is a lwIP netif to function.
2018-06-01 13:33:14 +10:00
7437215ad7
stm32/modnetwork: Change base entry of NIC object from type to base.
...
mod_network_nic_type_t doesn't need to be an actual uPy type, it just needs
to be an object.
2018-06-01 13:31:28 +10:00
6d87aa54d6
stm32/modnetwork: Don't take netif's down when network is deinited.
...
It should be up to the NIC itself to decide if the network interface is
removed upon soft reset. Some NICs can keep the interface up over a soft
reset, which improves usability of the network.
2018-06-01 13:27:06 +10:00
d02899f822
Add gamepad_singleto to root pointers for the nrf port
2018-05-30 23:11:23 +02:00
b219ce6d37
Add gamepad_singleton to root pointers
2018-05-30 23:11:22 +02:00
eab8e43188
rev E feather M4 express; remove named AREF pins
2018-05-29 20:25:28 -04:00
a1acbad27a
stm32/flash: Increase H7 flash size to full 2MiB.
2018-05-30 09:54:51 +10:00
958fa74521
stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI.
...
And update the GPIO init for NUCLEO_H743ZI to consistently use the mphal
functions.
2018-05-30 09:51:19 +10:00
50bc34d4a4
stm32/boards: Split combined alt-func labels and fix some other errors.
...
Pins with multiple alt-funcs for the same peripheral (eg USART_CTS_NSS)
need to be split into individual alt-funcs for make-pins.py to work
correctly.
This patch changes the following:
- Split `..._CTS_NSS` into `..._CTS/..._NSS`
- Split `..._RTS_DE` into `..._RTS/..._DE`
- Split `JTDO_SWO` into `JTDO/TRACESWO` for consistency
- Fixed `TRACECK` to `TRACECLK` for consistency
2018-05-29 21:37:49 +10:00
98d1609358
stm32/README: Update to include STM32F0 in list of supported MCUs.
2018-05-28 22:04:08 +10:00
e681372017
stm32/boards: Add NUCLEO_F091RC board configuration files.
2018-05-28 21:49:49 +10:00
1163400039
stm32/boards: Add alt-func CSV list and linker script for STM32F091.
2018-05-28 21:49:49 +10:00
ea7e747979
stm32: Add support for STM32F0 MCUs.
2018-05-28 21:49:49 +10:00
4a7d157a5b
stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs.
...
Sourced from STM32Cube_FW_F0_V1.9.0.
2018-05-28 21:49:49 +10:00
6d83468a30
stm32: Allow a board to disable MICROPY_VFS_FAT.
2018-05-28 21:46:20 +10:00
5c0685912f
stm32/timer: Make timer_get_source_freq more efficient by using regs.
...
Use direct register access to get the APB clock divider. This reduces code
size and makes the code more efficient.
2018-05-28 21:46:20 +10:00
070937fe93
stm32: Add support for Cortex-M0 CPUs.
2018-05-28 21:46:20 +10:00
f497723802
stm32: Allow to have no storage support if there are no block devices.
...
If no block devices are defined by a board then storage support will be
disabled. This means there is no filesystem provided by either the
internal flash or external SPI flash. But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
2018-05-28 21:45:46 +10:00
aa4a7a8732
stm32/usb: Guard USB device code with #if for whether USB is enabled.
...
With this change, all the USB source code can now be passed through the
compiler even if the MCU does not have a USB peripheral.
2018-05-28 21:45:46 +10:00
ef4c8e6e97
esp32: Silence ESP-IDF log messages when in raw REPL mode.
...
This prevents clients such as ampy, mpy-utils, etc getting confused by
extraneous data.
2018-05-28 20:15:08 +10:00
754c36bb37
Merge pull request #867 from dhalbert/fix_pirkey_apa102
...
3.0 pirkey build including appropriate frozen modules
2018-05-24 22:07:14 -04:00
ee896cdd41
restore I2C and UART. Don't do port.c resets and inits for modules that are not available.
2018-05-24 20:20:18 -04:00
42bf3a1306
Remove asf3 nvm code.
2018-05-24 13:14:40 -07:00
b9f36184f5
refine pirkey build
2018-05-24 13:28:03 -04:00
15ddc20436
stm32: Add new component, the mboot bootloader.
...
Mboot is a custom bootloader for STM32 MCUs. It can provide a USB DFU
interface on either the FS or HS peripherals, as well as a custom I2C
bootloader interface.
2018-05-24 23:21:19 +10:00
f47eeab0ad
stm32: Add low-level hardware I2C slave driver.
2018-05-24 23:11:13 +10:00
4200018a05
stm32: Remove unneeded HTML release notes from usbdev and usbhost dirs.
...
These files provide no additional information, all the version and license
information is captured in the relevant files in these subdirectories.
Thanks to @JoeSc for the original patch.
2018-05-24 11:28:54 +10:00
083f91363a
pirkey APA102 defs were commented out in mpconfigboard.h
2018-05-23 18:21:07 -04:00
aa86a1457f
Use merged in FreeTouch
2018-05-23 11:57:35 -07:00
6af5fc2796
Merge pull request #861 from tannewt/touchio3
...
Turn on touchio for M0 boards.
2018-05-23 14:20:15 -04:00
641caaa6dd
Gain space back in non-Express builds by using -finline-limit
2018-05-23 10:36:59 -07:00
df9b7e8f24
esp32/esp32.custom_common.ld: Put soc code in iram0.
...
This is what the IDF does, it must be done.
2018-05-23 12:57:50 +10:00
3607d3ba2c
Correctly reset the PTC
2018-05-22 14:20:35 -07:00
31bcd1c45c
Fixup gclk init
2018-05-22 13:56:12 -07:00
99123a8621
Turn on touchio for M0 boards. M4 will come later once its supported
...
by FreeTouch.
Fixes #670
2018-05-22 13:49:08 -07:00
22405d6bdb
Merge pull request #860 from dhalbert/3.0-cpx-crickit
...
turn off longint on cpx crickit; update frozen libs
2018-05-22 16:28:42 -04:00
165b28438a
Merge pull request #854 from python-ugame/extra-override
...
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
2018-05-22 10:22:35 -07:00
0d7db29630
turn off longint on cpx crickit; update frozen libs
2018-05-22 13:03:13 -04:00
49a81d5c4b
LONGLONG typo
2018-05-22 09:35:29 -04:00
45db48bbaa
make longint choice mechanism more readable
2018-05-22 08:04:14 -04:00
20b4b85f72
ports: Enable MICROPY_PY_BUILTINS_ROUND_INT on selected ports.
2018-05-22 14:18:16 +10:00
5680933483
refactor longint settings; make crickit cpx build
2018-05-21 23:58:03 -04:00
e773a2cdba
stm32/main: Use consistent indenting of macro #if's.
2018-05-22 13:17:03 +10:00
f68e722005
stm32/rng: Use Yasmarang for rng_get() if MCU doesn't have HW RNG.
2018-05-22 10:36:03 +10:00
cda964198a
stm32: Integrate lwIP as implementation of usocket module.
...
This patch allows to use lwIP as the implementation of the usocket module,
instead of the existing socket-multiplexer that delegates the entire TCP/IP
layer to the NIC itself.
This is disabled by default, and enabled by defining MICROPY_PY_LWIP to 1.
When enabled, the lwIP TCP/IP stack will be included in the build with
default settings for memory usage and performance (see
lwip_inc/lwipopts.h). It is then up to a particular NIC to register itself
with lwIP using the standard lwIP netif API.
2018-05-21 17:36:06 +10:00
6a6ab2b0ec
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
...
Some boards (like the uGame10) may want to have their own set of extra
modules. This change lets them override EXTRA_BUILTIN_MODULES in their
mpconfigboard.h and makes the ugame10 board do that.
2018-05-21 09:23:58 +02:00
6c955932f3
stm32/rtc: Don't try to set SubSeconds value on RTC.
...
The hardware doesn't allow it, instead the value is reset to 255 upon
setting the other calendar/time values.
2018-05-21 14:08:37 +10:00
cac2eddc16
minimal/main: Allow to compile without GC enabled.
2018-05-21 13:13:21 +10:00
afd0701bf7
esp8266: Change UART(0) to attach to REPL via uos.dupterm interface.
...
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function. Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch). UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this. For example, to attach use:
import uos, machine
uart = machine.UART(0, 115200)
uos.dupterm(uart, 1)
and to detach use:
uos.dupterm(None, 1)
When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None. Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach). When detached the UART(0) can be used for
other purposes.
If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
2018-05-21 11:31:59 +10:00
2923671a0c
esp32/Makefile: Update to latest ESP IDF version.
2018-05-21 11:28:36 +10:00
478410b409
zephyr/Makefile: Add kobj_types_h_target to Z_EXPORTS.
...
New generated Zephyr header file, without it build breaks.
2018-05-21 10:35:16 +10:00
5a023372df
zephyr: Add prj_disco_l475_iot1.conf with sensor drivers.
2018-05-21 10:35:16 +10:00
7afbc49863
zephyr/prj_base.conf: Enable DHCP and group static IPs together.
...
Add CONFIG_NET_DHCPV4, which, after
https://github.com/zephyrproject-rtos/zephyr/pull/5750 works as follows:
static addresses are configured after boot, and DHCP requests are sent
at the same time. If valid DHCP reply is received, it overrides static
addresses.
This setup works out of the box for both direct connection to a
workstation (DHCP server usually is not available) and for connection
to a router (DHCP is available and required).
2018-05-21 10:35:16 +10:00
0e52ee957d
zephyr/modzsensor: Zephyr sensor subsystem bindings.
2018-05-21 10:35:16 +10:00
080b0be1c8
zephyr/mpconfigport.h: Enable uhashlib and ubinascii modules.
...
To be able to use data integrity checks in various tests.
2018-05-21 10:35:16 +10:00
9480c188e8
zephyr/main: After builtin testsuite, drop to REPL.
...
It makes sense to make even testsuite-enabled builds be suitable for
interactive use.
2018-05-21 10:35:16 +10:00
1050045979
zephyr/README: Hint about existence of qemu_x86_nommu.
2018-05-21 10:35:16 +10:00
769e37b646
stm32/boards: Add config files for new board, STM32L496GDISC.
2018-05-18 22:39:49 +10:00
4005c63571
stm32/boards: Add board ld and af.csv files for STM32L496 MCU.
2018-05-18 22:39:44 +10:00
708cdb6276
stm32: Add support for STM32L496 MCU.
2018-05-18 22:37:30 +10:00
cf33ad9a54
atmel-samd/samd21: Enable long int on Express boards
...
This is necessary for using 1970 epoch in the time module.
2018-05-18 12:35:26 +02:00
06b293af29
pirkey, trinket, ugame
2018-05-17 13:56:10 -04:00
a84845c0ae
itsbitsy, metro
2018-05-17 13:48:33 -04:00
173a0a5faa
arduino, circuitplayground, feather boards
2018-05-17 13:42:08 -04:00
fc2b4526d3
worked
2018-05-17 13:33:26 -04:00
e1cccd3dac
rename to UART
2018-05-17 13:21:15 -04:00
2210fc60b1
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-default-serial
2018-05-17 13:08:43 -04:00
c846f4bdae
remove newline
2018-05-17 12:17:06 -04:00
4fd4adf974
not working
2018-05-17 12:14:51 -04:00
58331e3c28
esp8266/modmachine: Allow I2C and SPI to be configured out of the build.
...
I2C costs about 3000 bytes of code, and SPI costs about 4400 bytes.
2018-05-17 23:37:12 +10:00
dd13065843
esp8266/modnetwork: Raise ValueError when getting invalid WLAN id.
...
Instead of crashing due to out-of-bounds array access. Fixes #3348 .
2018-05-17 22:12:24 +10:00
f8a5cd24d8
esp8266/modnetwork: Return empty str for hostname if STA is inactive.
...
Instead of crashing due to NULL pointer dereference. Fixes issue #3341 .
2018-05-17 22:11:22 +10:00
6d4a2f5524
Merge branch 'master' into usbboot
2018-05-17 15:23:45 +07:00
52ebfd07a5
update nrfutil to 0.5.2d with singlebank option
2018-05-17 15:20:07 +07:00
94a79f340d
esp8266/mpconfigport.h: Add some weak links to common Python modules.
...
To make it easier/simpler to write code that can run under both CPython and
on an ESP8266 board.
2018-05-17 13:27:18 +10:00
30c625ff46
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 17:58:03 -04:00
0511becd55
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-i2c-gemma
2018-05-16 17:55:43 -04:00
6a8db03ade
Merge pull request #838 from rhooper/master
...
add supervisor.reload() to soft reboot from code
2018-05-16 17:52:16 -04:00
b9b742cc69
add spi def to all boards pins file
2018-05-16 17:43:14 -04:00
c2fa892a02
fix formatting
2018-05-16 17:38:44 -04:00
cc52f8efd9
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 17:32:50 -04:00
0a185c4d2d
Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-i2c-gemma
2018-05-16 17:07:58 -04:00
e8e75c056a
For the two boards without SCL and SDA can you still add the board global entry for I2C? That way they'll raise the NotImplementedError with the better message instead of a NameError.
2018-05-16 17:02:41 -04:00
4f93467841
set #define MICROPY_USE_INTERNAL_ERRNO (0) in mpconfigport for ESP8266 to fix compile error
2018-05-16 16:10:32 -04:00
de885e81b1
Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground
2018-05-16 16:07:55 -04:00
8a351595ef
formatting, trailing newlines
2018-05-16 15:57:25 -04:00
2c067edf54
used pins.c instead of README.rst
2018-05-16 15:54:01 -04:00
3144654854
SPI for all boards
2018-05-16 15:36:36 -04:00
244866c2c3
spi on much
2018-05-16 15:25:24 -04:00
10888be8e8
fixed pins
2018-05-16 15:07:12 -04:00
8d1d821876
pin issue
2018-05-16 14:58:57 -04:00
99e34e38eb
Merge pull request #829 from jerryneedell/jerryn_i2c
...
add keyword timeout to I2C -- only used for bitbangioi
2018-05-16 14:52:11 -04:00
b9ff46f1ed
stm32: Enable UART7/8 on F4 series that have these peripherals.
2018-05-16 11:55:07 +10:00
78f806c891
Added board specific READMEs
2018-05-15 22:42:27 +02:00
fbb57f902d
better error message
2018-05-15 15:37:48 -04:00
ff6e6b5155
best effort
2018-05-15 15:33:27 -04:00
4e65752d6e
feather m0 boards
2018-05-15 15:28:23 -04:00
90a09dba59
Merge branch 'master' of github.com:adafruit/circuitpython
2018-05-15 14:54:54 -04:00
cdeb7ddff8
fix non- builds
2018-05-15 14:27:05 -04:00
cd1f6627e4
formatting
2018-05-15 14:09:00 -04:00
bd7f603748
zero + feather logger
2018-05-15 14:06:01 -04:00
7d443c87b3
Add gemma_m0 pin exclusions
2018-05-15 14:03:39 -04:00
a10f04ad6e
support for 2
2018-05-15 13:53:53 -04:00
b0bacd9b0b
review code
2018-05-15 13:15:24 -04:00
3fd9900ea7
disable pins on trinket_m0 so that we can free a fair bit of flash - Issue #840
2018-05-15 13:13:59 -04:00
54293397c5
Merge pull request #837 from godlygeek/human_readable_oserror
...
Human readable OSError messages
2018-05-15 10:12:09 -04:00
53593d1315
fix #809
...
define CIRCUITPY_BOOT_OUTPUT_FILE will cause mp_hal_stdout_tx_strn() to
invoke before serial_init() is called. Solution is skipped output to
serial if it is not inited.
2018-05-15 18:40:49 +07:00
05f36ebeb1
update the bootloader hex for feather52840
2018-05-15 16:06:03 +07:00
dadf831fe9
Merge branch 'usbboot' of github.com:microbuilder/circuitpython into usbboot
2018-05-15 13:33:53 +07:00
5365e51e39
Merge branch 'master' into usbboot
2018-05-15 13:29:25 +07:00
cdaace1fdf
esp32/modnetwork: Fix STA/AP activate/deactivate for new IDF API.
...
WIFI_MODE_NULL is no longer supported by the ESP IDF, instead one must use
esp_wifi_start/esp_wifi_stop.
2018-05-15 11:50:37 +10:00
698912633f
Rename reload_next_character to reload_requested to make it match it's intended use
2018-05-14 17:00:38 -04:00
0518cc1d94
Include uerrno for boards with external SPI flash
...
Signed-off-by: Matt Wozniski <mwozniski@bloomberg.net>
2018-05-14 15:12:35 -04:00
a0954b9e11
Fix for Issue #770 - Provide a better error message when timers are still available.
2018-05-14 13:52:32 -04:00
1661cbb6e1
Make python detection more robust and allow setting PYTHON2 and PYTHON3 to override python executables during build.
2018-05-14 11:19:19 -04:00
e6b66f1092
stm32/usb: Initialise cdc variable to prevent compiler warnings.
...
Some compilers cannot deduce that cdc will always be written before being
used.
2018-05-15 00:18:03 +10:00
47ecbbbecb
stm32/usb: Add ability to have 2x VCP interfaces on the one USB device.
...
This patch adds the configuration MICROPY_HW_USB_ENABLE_CDC2 which enables
a new USB device configuration at runtime: VCP+VCP+MSC. It will give two
independent VCP interfaces available via pyb.USB_VCP(0) and pyb.USB_VCP(1).
The first one is the usual one and has the REPL on it. The second one is
available for general use.
This configuration is disabled by default because if the mode is not used
then it takes up about 2200 bytes of RAM. Also, F4 MCUs can't support this
mode on their USB FS peripheral (eg PYBv1.x) because they don't have enough
endpoints. The USB HS peripheral of an F4 supports it, as well as both the
USB FS and USB HS peripherals of F7 MCUs.
2018-05-14 23:44:45 +10:00
2e565cc0d4
stm32/usb: Change HID report funcs to take HID state, not usbdev state.
2018-05-14 17:04:43 +10:00
91bca340ec
stm32/usb: Change CDC tx/rx funcs to take CDC state, not usbdev state.
2018-05-14 16:55:04 +10:00
68271a27e6
stm32/usb: Make CDC endpoint definitions private to core usbdev driver.
2018-05-14 16:53:45 +10:00
ed92d62326
stm32/usb: Combine HID lower-layer and interface state into one struct.
2018-05-14 16:34:31 +10:00
bf08a99ccd
stm32/usb: Combine CDC lower-layer and interface state into one struct.
2018-05-14 16:15:58 +10:00
ed32284b70
stm32/usb: Use usbd_cdc_itf_t pointer directly in USB_VCP class.
2018-05-14 15:24:44 +10:00
fb25c81062
stm32/modpyb: Remove unused includes and clean up comments.
...
The documentation (including the examples) for elapsed_millis and
elapsed_micros can be found in docs/library/pyb.rst so doesn't need to be
written in full in the source code.
2018-05-14 14:01:50 +10:00
88c26a48b4
stm32/pyb_i2c: Put pyb.I2C under MICROPY_PY_PYB_LEGACY setting.
...
When disabled, the pyb.I2C class saves around 8k of code space and 172
bytes of RAM. The same functionality is now available in machine.I2C
(for F4 and F7 MCUs).
It is still enabled by default.
2018-05-14 13:53:46 +10:00
92c5e2708d
stm32/modpyb: Introduce MICROPY_PY_PYB_LEGACY config option for pyb mod.
...
This is enabled by default. When it is disabled all legacy functions and
classes in the pyb module are excluded from the build.
2018-05-14 13:49:22 +10:00
a0f7b4c678
stm32/accel: Switch pyb.Accel to use new C-level I2C API.
2018-05-14 13:23:18 +10:00
ce824bb67e
stm32/machine_i2c: Use new F4 hardware I2C driver for machine.I2C class.
...
And remove the old one based on ST code.
2018-05-14 13:22:12 +10:00
b21415ed4f
stm32/i2c: Add new hardware I2C driver for F4 MCUs.
...
This driver uses low-level register access to control the I2C peripheral
(ie it doesn't rely on the ST HAL) and provides the same C-level API as the
existing F7 hardware driver.
2018-05-14 13:19:03 +10:00
ca36645410
stm32/usbd_hid_interface: Address possible race condition vs. interrupt.
...
The USB IRQ may fire once USBD_HID_ClearNAK() is called and then change the
last_read_len value.
2018-05-14 12:08:34 +10:00
1f1623d3b7
stm32/usbdev: Be honest about data not being written to HID endpoint.
...
USB_HID.send() should now return 0 if it could not send the report to the
host.
2018-05-14 12:01:27 +10:00
d6c26942a5
add timeout keyword to I2C - for bitbangio - ignored for busio
2018-05-13 21:54:44 -04:00
67e1a4f8be
esp32: Update to latest ESP IDF version.
...
- Updated supported git hash to current IDF version.
- Added missing targets and includes to Makefile.
- Updated error codes for networking module.
- Added required constant to sdkconfig configuration.
2018-05-14 11:42:46 +10:00
ce5eae1c76
Merge pull request #761 from jepler/nrf-modules
...
nrf: Enable binascii, hashlib modules
2018-05-11 19:40:45 -07:00
aeaace0737
stm32/usbdev: Remove unused RxState variable, and unused struct.
2018-05-11 23:20:59 +10:00
abde0fa226
stm32/usbdev: Convert files to unix line endings.
...
Also remove trailing whitespace and convert tabs to spaces.
2018-05-11 23:03:52 +10:00
471fdae993
nrf: Enable binascii, hashlib modules
...
These modules would be very handy to have in order to implement a
more robust replacement for ampy. It costs around 2KiB of text and
no data or bss.
'binascii' has base64 encoding, which can be used to create a fully
8-bit-clean transport above the slightly cooked serial connection of
these boards.
'hashlib' is a bit less critical, but I have found it handy to
be able to robustly checksum remote files.
I see this as only being useful on ports which don't have USB block
device support, so atmel-samd doesn't need it. These modules are
already on esp8266 so I think nrf52 seems like the only one that
needs it.
2018-05-11 07:41:09 -05:00
56a273ebff
stm32/usbd_conf: Changes files to unix line endings and apply styling.
...
This patch is only cosmetic and has no functional change.
2018-05-11 22:17:58 +10:00
9f4eda542a
stm32/usbd_conf.h: Remove unused macros and clean up header file.
2018-05-11 22:04:56 +10:00
51106db93d
Merge pull request #827 from dhalbert/3.0_pb_pins_digitalinout
...
PBxx pins were not setting DRVSTR or reporting PULL properly
2018-05-10 20:42:26 -07:00
240659da0e
PBxx pins were not setting DRVSTR or reporting PULL properly
2018-05-10 23:09:51 -04:00
b208aa189e
stm32/README: Update to reflect current MCU support.
2018-05-11 10:36:46 +10:00
2acd5d88b6
nrf52: enable framebuf module
...
Closes : #656
2018-05-10 18:37:08 -05:00
c1115d931f
stm32/usb: Use correct type for USB HID object.
2018-05-09 16:00:19 +10:00
e1bc85416a
stm32/usb: Fix broken pyb.have_cdc() so it works again.
2018-05-09 15:59:48 +10:00
e638defff4
stm32/i2c: Make sure stop condition is sent after receiving addr nack.
2018-05-09 15:53:09 +10:00
50fc90bc5f
Add pause/resume control to AudioOut and I2SOut
...
Fixes #808
2018-05-08 11:53:13 -07:00
d3a5d40374
Merge pull request #785 from notro/rtc_calibration
...
atmel-samd/samd21: Rework clock setup + calibration
2018-05-08 10:55:51 -07:00
e82f37c60e
enable cache in SAMD51
2018-05-07 21:55:37 -04:00
5d5d14709f
Add clock representation with calibration
...
Add a python representation of the clocks with the possibility to change
the calbration of clock sources.
2018-05-07 23:04:02 +02:00
56bf411d21
esp8266/modutime.c: remove symbol conflicts between time and utime modules
...
this renames symbols in modutime.c so that it no longer conflicts with
the time module. This commit does not enable the utime module; it
simply makes it easier for a local developer to do so.
2018-05-07 11:55:20 -04:00
b617271191
Update mpconfigport.h
...
comment out define of CIRCUITPYTHON_BOOT_OUTPUT_FILE for NRF52 -- it does not work properly
2018-05-07 08:59:24 -04:00
2893e795fc
atmel-samd/samd21: Use XOSC32K on boards with a crystal
...
Use XOSC32K on boards that have BOARD_HAS_CRYSTAL defined and set to 1.
2018-05-05 18:45:15 +02:00
4adba51569
atmel-samd/samd21: Rework clock setup
...
Make clock setup explicit instead of using the convoluted asf4 macro setup.
enable_clock_generator():
- Add GCLK_GENCTRL_OE to stick with the current setup.
- Handle divisor larger than 31 for generator 2
- Change the source argument so it can take the GCLK_GENCTRL_SRC_XXXX_Val
macros without casting to uint8_t.
This patch should not introduce any functional changes except keeping
GCLK_GENCTRL_OE enabled when the I2S clock is enabled.
2018-05-05 18:01:13 +02:00
d32349cee8
Merge pull request #804 from dhalbert/boot_out_fixes
...
3.0: Handle bad power on reset.
2018-05-04 10:06:35 -07:00
32363b801b
3.0: add CircuitPlayground and HID to CPX frozen modules
2018-05-04 08:44:33 -04:00
f21c2494cb
atmel-samd/samd21: Enable OSC32K
...
Enable OSC32K which is used by the RTC.
For some reason the RTC worked without enabling it.
2018-05-04 13:34:30 +02:00
4a2a553647
atmel-samd/clocks: Split out samd21_clocks.c and samd51_clocks.c
...
Enhance readability by separating the samd21 and samd51 clock code.
This patch should not introduce any functional changes.
2018-05-04 13:32:56 +02:00
aea71dbde0
stm32/Makefile: Use -O2 to optimise compilation of lib/libc/string0.c.
2018-05-04 15:53:51 +10:00
cb3456ddfe
stm32: Don't use %lu or %lx for formatting, use just %u or %x.
...
On this 32-bit arch there's no need to use the long version of the format
specifier. It's only there to appease the compiler which checks the type
of the args passed to printf. Removing the "l" saves a bit of code space.
2018-05-04 15:52:03 +10:00
b614dc73b0
stm32/dma: Fix duplicate typedef of struct, it's typedef'd in dma.h.
2018-05-04 15:35:43 +10:00
f486ead84a
Handle bad power on reset.
2018-05-03 23:43:02 -04:00
a8bd37f14d
Merge pull request #799 from larsks/feature/circuitpython/station-ssid
...
esp8266/modnetwork: Allow to get ESSID of AP that STA is connected to.
2018-05-03 10:12:50 -07:00
1e0353e2db
esp8266/modnetwork: Allow to get ESSID of AP that STA is connected to.
...
This patch enables iface.config('essid') to work for both AP and STA
interfaces.
(cherry picked from commit d8fdb77ac9
2018-05-03 11:49:37 -04:00
ad1b16a3ec
ports/esp8266: try both binascii and ubinascii in inisetup.py
...
in recent circuitpython builds, `ubinascii` is available as
`binascii`. This modifies `modules/inisetup.py` to use the same
import semantics as `modules/websocket_helper.py`: first try importing
`ubinascii`, and if that fails, fall back to importing `binascii`.
Closes adafruit/circuitpython#795
2018-05-03 09:23:54 -04:00
9d484c4935
Merge pull request #789 from tannewt/pdmin3
...
Re-enable PDMIn without ASF
2018-05-02 19:59:20 -04:00
04f75b8903
Reduce the buffer size back to what 2.x has. Increase was leftover
...
from debugging.
2018-05-02 15:21:43 -07:00
22b7cd3d51
Fix 8 bit recordings on CPX.
...
The DMA trigger source was incorrect when using serializer 1 on
the SAMD21.
Playback register was incorrect for 8 bit as well. Now fixed.
2018-05-02 15:15:25 -07:00
449385b250
Merge pull request #790 from dhalbert/cpu_temp
...
Implement microcontroller.cpu.temperature.
2018-05-02 12:23:03 -07:00
33b9c39f58
peripherals.c should include peripherals.h
2018-05-02 13:50:34 -04:00
12a3fccc7e
esp32/modsocket: Check for pending events during blocking socket calls.
2018-05-03 00:09:25 +10:00
3e35cbcd5b
allow esptool.py invocation to be set via make vars
...
This commit replaces the literal calls to `esptool.py` with the
`$(ESPTOOL)` Makefile variable. This allows one to set the esptool
invocation on the Make command line:
make ESPTOOL="python2 $(which esptool.py)"
(or via the environment, an include file, etc)
Closes #793
2018-05-02 09:47:01 -04:00
4fa7d36cee
esp32: Use mp_rom_map_elem_t and MP_ROM_xxx macros for const dicts.
2018-05-02 22:33:41 +10:00
6681eb809a
esp32/modsocket: Correctly handle reading from a peer-closed socket.
...
If a socket is cleanly shut down by the peer then reads on this socket
should continue to return zero bytes. The lwIP socket API does not have
this behaviour (it only returns zero once, then blocks on subsequent calls)
so this patch adds explicit checks and logic for peer closed sockets.
2018-05-02 22:31:00 +10:00
fb7dabb971
esp32/README: Add --init to submodule update command.
...
Add --init to the submodule update example, thus, all submodules get
initialised including the nested (--recursive) ones. Without it there
might not be a submodule init.
2018-05-02 17:24:17 +10:00
6410e174c5
esp8266: Disable DEBUG_PRINTERS for 512k build.
...
Disabling this saves around 6000 bytes of code space and gets the 512k
build fitting in the available flash again (it increased lately due to an
increase in the size of the ESP8266 SDK).
2018-05-02 15:51:19 +10:00
051686b0a8
stm32/main: Clean up and optimise initial start-up code of the MCU.
2018-05-02 15:20:24 +10:00
a03e6c1e05
stm32/irq: Define IRQ priorities directly as encoded hardware values.
...
For a given IRQn (eg UART) there's no need to carry around both a PRI and
SUBPRI value (eg IRQ_PRI_UART, IRQ_SUBPRI_UART). Instead, the IRQ_PRI_UART
value has been changed in this patch to be the encoded hardware value,
using NVIC_EncodePriority. This way the NVIC_SetPriority function can be
used directly, instead of going through HAL_NVIC_SetPriority which must do
extra processing to encode the PRI+SUBPRI.
For a priority grouping of 4 (4 bits for preempt priority, 0 bits for the
sub-priority), which is used in the stm32 port, the IRQ_PRI_xxx constants
remain unchanged in their value.
This patch also "fixes" the use of raise_irq_pri() which should be passed
the encoded value (but as mentioned above the unencoded value is the same
as the encoded value for priority grouping 4, so there was no bug from this
error).
2018-05-02 14:41:02 +10:00
266446624f
stm32/dma: Always deinit/reinit DMA channels on L4 MCUs.
...
The problem is the existing code which tries to optimise the
reinitialisation of the DMA breaks the abstraction of the HAL. For the
STM32L4 the HAL's DMA setup code maintains two private vars (ChannelIndex,
DmaBaseAddress) and updates a hardware register (CCR).
In HAL_DMA_Init(), the CCR is updated to set the direction of the DMA.
This is a problem because, when using the SD Card interface, the same DMA
channel is used in both directions, so the direction bit in the CCR must
follow that.
A quick and effective fix for the L4 is to simply call HAL_DMA_DeInit() and
HAL_DMA_Init() every time.
2018-05-02 13:41:23 +10:00
4c0f664b1a
stm32/flash: Remove unused src parameter from flash_erase().
2018-05-02 13:11:56 +10:00
Hierophect
Dan Halbert
siddacious
Kattni Rembor
Scott Shawcroft
Carl Elkins
jandjstudios
Scott Shawcroft
iot49
Anthony DiGirolamo
Chris Osterwood
Radomir Dopieralski
brentru
shazz
Elvis Pfützenreuter
Tavish Naruka
Dan Halbert
sabas1080
ladyada
wallarug
ladyada
Carlos
ITACA Innovation S.R.L
Nick Moore
siddacious
Max Holliday
Damiano Mazzella
Melissa LeBlanc-Williams
Sabas
Justin R. Cutler
John Reese
caternuson
sommersoft
Jerry Needell
TG-Techie
Noralf Trønnes
Elias Santistevan
hathach
ShawnHymel
Lars Kellogg-Stedman
Roy Hooper
Gregory P. Smith
dsiee
TG-Techie
jimblom
Jeff Epler
Benjamin Shockley
ATMakersBill
arturo182
Josh Klar
Josh Klar
Paul Sajna
Jeff Epler
Enrico Paganin
Pierrick C
Paul Kierstead
Egor Leonenko
Scott Shawcroft
mrmcwethy
Damien George
rolandvs
Glenn Moloney
Angus Gratton
Matt Wozniski
Daniel Shaulov
Paul Sokolovsky
Tobias Badertscher
Matt Land
Ryan Shaw
Kevin Townsend
Peter D. Gray
Bas Wijnen
Torwag