7b9dfc9952
nrf: i2s: tune audio buffering
...
.. based on some tasks I found that caused stuttering:
# Test SD and printing
while True: os.listdir('.')
# Test bulk I/O
while True: len(open('somefile.wav', 'rb').read())
Each of these tasks *WAS* worse and I am improving them in a separate
PR by adding RUN_BACKGROUND_TASKS to them.
2019-09-09 20:13:12 -05:00
c66f5a8536
nrf: i2s: rewrite without 'goto'
2019-09-09 19:26:18 -05:00
fe9605a6a3
nrf: i2s: Comment this slightly tricksy code
2019-09-09 19:25:52 -05:00
c438468a82
Updated VID and PID
2019-09-09 17:05:18 -04:00
d8251ae4ab
Include full descriptor list
2019-09-09 15:01:04 -04:00
129615a724
text fixes
2019-09-09 11:58:27 -04:00
426ddb356e
Add support for F412 via latest tinyusb update
2019-09-09 11:42:55 -04:00
ccf08aa3df
nrf: I2SOut: deal more gracefully with errors from the sample
2019-09-08 21:59:07 -05:00
e890bc8efe
nrf: Makefile: sensible flags for debugging
...
This enables the highest level of debug symbols, and all optimizations
except lto that do NOT interfere with debugging, in the view of the gcc
maintainers.
2019-09-08 21:07:00 -05:00
f38ee42874
nrf: Add i2s audio output
...
Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC.
I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal
bit rates. With this setup, all the 11025Hz samples sound good.
I tested play, pause, and loop functionality.
During some runs with 22050Hz samples, there were glitches. However,
these may have only occurred during runs where I had set breakpoints
and watchpoints in gdb.
I also tested with a MAX98357A I2S amplifier. On this device, everything
sounded "scratchy". I was powering it from 5V and the 5V rail seemed
steady, so I don't have an explanation for this. However, I haven't
tried it with a SAMD board.
2019-09-08 16:46:35 -05:00
bd7b03fc7e
Merge pull request #2124 from dhalbert/cpb-fixes
...
Fix Circuit Playground Bluefruit pin errors
2019-09-08 12:07:16 -04:00
0d2e9c3762
WIP
2019-09-07 15:54:16 -04:00
beb40a62a7
Fix missed shift replacement
2019-09-07 13:19:50 -04:00
642f4535f4
text fixes
2019-09-06 19:44:57 -04:00
4490fb196d
delete analogio for now
2019-09-06 19:42:03 -04:00
a3ed5ec27b
Add latest USB support
2019-09-06 18:02:57 -04:00
589b502bfc
Merge branch 'master' into stm32-analogio
2019-09-06 17:55:33 -04:00
a932d2c4a1
Minor fixes
2019-09-06 17:40:45 -04:00
8c0be5fbe2
Pack pin numbers, add ADC to pin structure, support DigitalIO
2019-09-06 17:30:52 -04:00
cf6fbcbf2d
Merge pull request #2123 from hierophect/stm32-flashstub-fix
...
Fix stm32f412zg compile warning
2019-09-06 14:56:24 -04:00
3c22c690c8
CPB A1 pin mapping wrong; remove A7
2019-09-06 14:17:11 -04:00
3156ee1acb
Re-apply warning as error
2019-09-06 11:28:57 -04:00
ba45f98073
Add basic analogio files
2019-09-06 11:26:20 -04:00
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking
...
Samd dma tracking
2019-09-05 11:27:59 -07:00
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4
...
Add support for PewPew M4 board
2019-09-05 11:26:47 -07:00
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
f3af2a6fb7
Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac
2019-09-04 21:56:13 -04:00
195de97c67
use only one endpoint pair for MSC except on SAMD21
2019-09-04 21:45:16 -04:00
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden
...
Add .hidden to TileGrid and Group
2019-09-04 15:48:00 -04:00
321b57a5d2
Merge pull request #2080 from sommersoft/mixer_voice
...
Add audiocore.MixerVoice
2019-09-04 12:46:59 -07:00
b46c8dcc62
Merge pull request #2065 from hierophect/f411re-feature-buildout
...
F411re feature buildout
2019-09-04 15:45:54 -04:00
7951646b9a
Disable bitbangio on uGame10
2019-09-04 11:49:47 -07:00
479b047618
Reverted descriptor changes pending HID restructuring
2019-09-04 13:58:18 -04:00
b1c3d47413
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-09-01 21:16:12 -05:00
c4d6f4f536
disable 'audiomixer' for all M0 boards
2019-09-01 17:39:20 -05:00
b954b2f5df
Merge pull request #2092 from dhalbert/bleio-api-revamp
...
Bleio attribute api revamp
2019-08-29 21:48:31 -07:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
7a64af9280
rename bleio module to _bleio
2019-08-29 18:44:27 -04:00
b11b7916fd
address minor issues: typos, make translate, and sphinx
2019-08-29 17:58:21 -04:00
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
f17059b10b
another API rework: less abstraction leakage
2019-08-28 23:15:22 -04:00
30a9346373
samd: audio_dma: Track channel allocation
...
Previously, we depended on allocated channels to always be
"dma_channel_enabled". However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.
((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)
Therefore,
* Add audio_dma_{allocate,free}_channel.
* audio_dma_free_channel implies audio_dma_disable_channel
* track via a new array audio_dma_allocated[]
* clear all allocated flags on soft-reboot
* Convert find_free_audio_dma_channel to audio_dma_allocate_channel
* use audio_dma_allocated[] instead of dma_channel_enabled() to check
availability
* remove find_free_audio_dma_channel
* For each one, find a matching audio_dma_disable_channel to convert
to audio_dma_free_channel
Closes : #2058
2019-08-28 17:00:22 -05:00
0b00787b4d
samd: AudioOut: ensure stopped before deinit
...
.. otherwise, a sequence like
>>> a = audioio.AudioOut(board.A0)
>>> a.play(sample, loop=True)
>>> a.deinit()
would potentially leave related DMA channel(s) active.
2019-08-28 16:43:55 -05:00
19c59b41ed
bleio: API change to create and connect related objects simulatenously: no orphan bleio objects
2019-08-28 16:15:09 -04:00
a72bcab0fd
Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp
2019-08-28 16:09:18 -04:00
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
0364f1dc85
remove some debugging prints
2019-08-26 08:17:59 -04:00
76446f634b
BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding
2019-08-25 21:38:13 -04:00
696117b048
disable audiomixer on boards it doesn't fit on
2019-08-25 14:53:34 -05:00
2e4b687ba5
enable audiomixer on nrf
2019-08-25 07:32:48 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
2497cbe186
Fix nrf builds
2019-08-22 14:23:33 -07:00
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
d37dd4d758
Updated ParallelBus implementation in nrf port
2019-08-22 14:08:33 -07:00
70680d5b22
EPaper displays work mostly.
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
18f441ae35
Merge pull request #2083 from dhalbert/no-32khz-xtal
...
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 13:14:40 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area
...
To displayio.Display: expose fill_area and add a property for rotation
2019-08-21 23:48:21 -07:00
acc6df4959
merge similar fix in
2019-08-22 01:29:34 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
524fa82092
Merge pull request #2081 from dhalbert/rotaryio-pin-check-fix
...
typo in IncrementalEncoder.c
2019-08-21 13:02:06 -07:00
389e7cc35d
Merge pull request #2072 from bmeisels/nrf-no-crystal-support
...
Add support for nrf boards that don't have an external crystal
2019-08-21 13:01:26 -07:00
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
fe2ec6c887
Add support for nrf boards that don't have an external crystal
2019-08-20 23:30:21 +03:00
6e3a6d0ac5
typo in IncrementalEncoder.c
2019-08-20 16:23:17 -04:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
44b28d1187
update tinyusb to 00c440cb
2019-08-19 19:42:45 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
e490e6361f
Add warnings, cosmetic fixes, remove vestigial modules
2019-08-19 10:47:18 -04:00
26a05d01dc
Merge remote-tracking branch 'origin/master' into nrf-pdm-audioin
2019-08-18 21:30:14 -05:00
95411a62b3
Cosmetic fixes
2019-08-18 19:08:27 -04:00
912fd7759d
nrf: PDMIn: Implement
...
So far, this supports only 16kHz and 16-bit samples with a fixed gain.
This is enough to support the basic functionality of e.g., sensing
ambient audio levels.
2019-08-18 15:58:04 -05:00
79f8a85786
nrf: stub out audiobusio.PDMIn, audiobusio.I2SOut
2019-08-18 15:55:57 -05:00
3f7321af00
Merge pull request #2031 from jepler/nrf-lto
...
Enable link-time optimization for nrf targets
2019-08-18 12:35:26 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
...
BLE: more features
2019-08-16 14:50:00 -07:00
630c92392a
address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings
2019-08-16 15:18:53 -04:00
7dbf1a8caa
text fixes
2019-08-15 17:56:15 -04:00
1f42ce5f40
QOL fixes, compatibility fixes, attribution
2019-08-15 17:45:40 -04:00
bc7ba33892
Add uid fetch, revert USB hacks
2019-08-15 16:35:01 -04:00
a9d3ad86e5
Fix flash size, add filesystem disable flag
2019-08-15 15:55:33 -04:00
0fdb5a032f
Text fixes
2019-08-15 15:12:50 -04:00
620d3d14dd
Add conditional endpoints to descriptor script
2019-08-15 13:41:51 -04:00
1539dca7f0
Add reset support, minor fixes
2019-08-14 13:14:42 -04:00
5877bd6036
CPblue initial definition
2019-08-13 22:12:36 -04:00
c4c55fffb1
Fixed remaining issues with flash organization and writing
2019-08-13 18:05:40 -04:00
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano
...
Add PyPortal Titano
2019-08-12 16:01:10 -07:00
11dd3a260e
nrf: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
d9ee2d28a0
atmel-samd: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
300dc68955
Further non-functional flash changes
2019-08-10 18:00:09 -04:00
294d6dc867
Add flash functions and setup, fix msc descriptor bug
2019-08-09 19:58:54 -04:00
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
1570ef2dd4
specifying attribute length; fix up value setting
2019-08-07 23:49:09 -04:00
33b949abfa
samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines
...
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background(). This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
2019-08-07 21:29:24 -05:00
500d1bb168
samd: audio_dma.c: Remove exceptions, just return early
...
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
2019-08-07 20:20:36 -05:00
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
c375a5d37f
Add pin and module support for F411
2019-08-07 18:12:13 -04:00
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
d047b73a9c
fix newly-introduced bugs; UART client/server working again
2019-08-07 11:10:21 -04:00
39c64bf83c
samd: audio_dma_stop: don't free invalid channel
...
audio_dma_stop can be reached twice in normal usage of AudioOut.
This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number. This also prevents
the event channel from being disabled twice.
The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
2019-08-06 22:00:31 -05:00
8b717955ba
samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking
...
It turns out the "disable" error will fire in practice, we'll fix that
next.
2019-08-06 22:00:31 -05:00
d74c8b9425
WIP: more Descriptor work; refactor gattc/gatts read/write
2019-08-06 22:55:25 -04:00
6253f11503
samd: audio_dma_stop: Clear out audio_dma_state[]
...
As identified in #1908 , when both AudioOut and PDMIn are used, hard
locks can occur. Because audio_dma_stop didn't clear audio_dma_state[],
a future call to audio_dma_load_next_block could occur using a DMA
object which belongs to PDMIn.
I believe that this Closes : #1908 though perhaps it is still not the full
story.
Testing performed: Loaded a sketch similar to the one on #1908 that
tends to reproduce the bug within ~30s. Ran for >300s without hard
lock. HOWEVER, while my cpx is no longer hard locking, it occasionally
(<1 / 200s) announces
Code done running. Waiting for reload.
(and does so), even though my main loop is surrounded by a 'while True:'
condition, so there are still gremlins nearby.
2019-08-06 21:34:21 -05:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
59efce3035
Merge pull request #2039 from dhalbert/metro-52840
...
Metro nRF52840 rev A defn; remove '#define FEATHER52840' from mpconfigboard.h
2019-08-05 18:48:36 -07:00
b675a27e16
Merge pull request #2000 from jepler/nrf-pwm-audio
...
Implement PWM audio out for the nrf port
2019-08-05 17:26:27 -07:00
c56566179a
Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files
2019-08-05 18:10:27 -04:00
b67d04a5b1
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 16:35:44 -04:00
2489c09b44
Merge i2c implementation
2019-08-04 17:24:07 -04:00
a635d46b1a
Fix merge related issues
2019-08-04 17:19:38 -04:00
0c43bae01d
Merge branch 'master' into f411re-feature-buildout
2019-08-04 16:37:49 -04:00
268cf0a3cc
Quick fix for incorrect MCU package type
2019-08-04 16:31:03 -04:00
77bc1ba03e
nrf: PWMAudioOut: Remove the need to wait in "pause"
...
The original formulation was because I saw the need to avoid a transition
from playing to stopped exactly when a resume was taking place. However,
@tannewt was concerned about this pause causing trouble, because it could
be relatively lengthy (several ms even in a typical case).
After reflection, I've convinced myself that updating the registers
in this order in resume avoids a window where a "stopped" event can
be missed as long as the shortcut is updated first.
Testing re-performed: pause/resume testing of looped RawSample and
WaveFile audio sources.
2019-08-03 08:19:25 -05:00
4bae29b925
nrf: enable link-time optimization
...
Testing performed: installed freshly built .uf2 on a Particle Xenon.
Checked that circuitpython still starts.
Checked that the size of all .uf2 files for nrf builds are plausible.
Aside from memory savings, the performance of Python code (pystone)
increased by about +14%.
However, this adds about 12-16 seconds to each nrf build.
Timings & Sizes (build system: i5-3320M, -j5 parallelism on 4 threads):
Before:
$ make -j5 BOARD=particle_xenon
765004 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232076 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
68.54user 11.83system 0:34.34elapsed 234%CPU
pystones before: 570
After:
$ make -j5 BOARD=particle_xenon
804284 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232072 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
71.06user 11.77system 0:46.91elapsed 176%CPU
pystones after: 650
Timings on travis:
Before:
Build feather_nrf52840_express for pl took 55.79s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 3.18s and succeeded
After:
Build feather_nrf52840_express for pl took 62.72s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 19.10s
Closes : #1396
2019-08-02 20:59:47 -05:00
7ce3776b80
WIP: rework of Characteristic properties; enhance Descriptor; not tested
2019-08-02 17:57:31 -04:00
28b7cbfca6
nrf: Mark interrupt vectors as used
2019-08-02 07:53:35 -05:00
34e2bab96a
nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE
2019-08-01 18:53:07 -05:00
76f65ac694
Implement play/pause
...
.. and also incidentally fix a problem where a RawSample could only
be looped 131070 times.
2019-07-31 20:02:56 -05:00
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
b0f7c7bc4c
Merge remote-tracking branch 'origin/master' into nrf-pwm-audio
2019-07-31 16:32:54 -05:00
06d53ef8a7
minor debugging changes
2019-07-31 17:06:44 -04:00
e2fc55f829
Add baseline HAL I2C support
2019-07-31 14:58:55 -04:00
ee518b9141
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-07-31 11:22:48 -04:00
91d791afd0
cleanup adapter.address; add uniquish suffix to BLE device name
2019-07-31 00:30:24 -04:00
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
83129b8c63
BLE: peripheral client pairing (not yet bonding); fix time doc formatting
2019-07-30 14:26:26 -04:00
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
b72352949b
PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_
2019-07-29 18:39:00 -04:00
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
6c7723905c
Add temp status LEDs
2019-07-29 11:21:35 -04:00
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
343d5aa0ac
Delete redundant file
2019-07-26 16:48:23 -04:00
90b1701b6c
Add CDC REPL access
2019-07-26 14:06:27 -04:00
a183425e00
ports/nrf: Implement audioio.AudioOut using PWM
...
This implements AudioOut, with known caveats:
* pause/resume are not yet implemented (this is just a bug)
* at best, the sample fidelity is 8 bits (this is a hardware limitation)
Testing performed:
My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected. It is powered from
VUSB.
I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive. This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270
Nothing about the code I've written should limit the usable pins.
All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
2019-07-26 07:57:11 -05:00
2bc704fe07
ports/nrf: factor out routines for allocating, freeing pwm channels
2019-07-26 07:52:37 -05:00
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
d99d3bd471
Merge pull request #2010 from jepler/audiocore
...
audiocore: Factor from audioio
2019-07-25 13:52:30 -07:00
6b44e40ee8
audiocore: Factor from audioio
...
When nrf pwm audio is introduced, it will be called `audiopwmio`. To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.
INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
2019-07-25 06:44:26 -05:00
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup
...
Add STM32 Discovery F412ZG and F411RE support
2019-07-24 18:49:48 -07:00
295afaaf6c
Update SystemCoreClock macro
2019-07-24 16:31:25 -04:00
981398406c
Implement working (if useless) USB on F411
2019-07-24 16:23:35 -04:00
21f1ae51df
Merge in PR edits
2019-07-24 15:02:26 -04:00
d66c9590af
Merge tinyusb changes from upstream
2019-07-24 14:54:22 -04:00
a63df51893
Requested changes, general cleanup
2019-07-24 14:21:27 -04:00
c921f6637f
update tinyusb lib to 0.5.x
2019-07-24 16:46:31 +07:00
267468834d
Pin down some TUSB issues
2019-07-23 19:40:26 -04:00
0dee1a1646
Setup for changes
2019-07-23 17:04:03 -04:00
f9b5a9af4e
Merge branch 'F3xx-port-setup' into f411re-tinyusb
2019-07-23 15:17:18 -04:00
5cfde7b6ea
Switch to submodule for cube files
2019-07-23 14:37:30 -04:00
9c1487cff6
Python doc generator fixes
2019-07-23 13:48:59 -04:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1
...
Update Arch Linux ARM compiler installation instructions
2019-07-22 19:29:53 -07:00
a3673cc79b
Set up for new tinyusb integration. Not yet functional.
2019-07-22 17:16:33 -04:00
58630a844a
Add feature conditionals and clean up
2019-07-22 12:58:28 -04:00
e4d92a3aad
Fix incorrect preprocessor define NRFX_TIMER3/4
...
Should be NRF_TIMER3 and NRF_TIMER4
2019-07-22 20:07:05 +05:30
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.
2019-07-19 16:10:32 -07:00
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
10b9ca5a92
pin selection cleanup, tinyUSB update
2019-07-19 15:09:45 -04:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
734012aa8b
Makefile cleanup
2019-07-18 17:55:57 -04:00
755b86e38b
Deinit-capable USB on 411
2019-07-18 17:17:46 -04:00
43e8a4110f
Add missing files for DigitalIO
2019-07-17 14:18:01 -04:00
45e73c414a
fix gitignore
2019-07-17 14:14:03 -04:00
c588cc6db0
first pass of DigitalIO
2019-07-17 14:07:33 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
f31a0d9cf5
Serial REPL support
2019-07-11 13:41:10 -04:00
d12e1a8d74
Merge pull request #1990 from kattni/pyruler
...
Adding PyRuler to CircuitPython.
2019-07-10 12:28:43 -07:00
a0e6975b9d
Add some usb reference material, non functional
2019-07-10 14:26:57 -04:00
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
7742a97c22
Add STM32F412-DISCO support, cleanup
2019-07-09 13:03:22 -04:00
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
040acc3a32
remove dependencies for stable build
2019-07-01 19:47:10 -04:00
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
94a2eff05c
remove build, fix link issues)
2019-06-28 19:22:23 -04:00
04a9bc0d35
case changes
2019-06-28 16:45:07 -04:00
b93f93f174
name change but actually
2019-06-28 16:34:27 -04:00
caed59ec64
name change
2019-06-28 16:21:13 -04:00
16ba035ba7
first commit, very crude
2019-06-28 15:36:08 -04:00
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
d3adfde22a
Merge pull request #1968 from adafruit/4.0.x
...
Merge in nrf neopixel fix
2019-06-25 11:35:58 -07:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
1356819de1
Handle None for BLE name; fix ScanEntry bug; compile issue
2019-06-17 23:16:40 -04:00
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
608bf5076b
Merge pull request #1804 from ITACAInnovation/master
...
Merging updates
2019-04-16 13:54:40 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
7822d013cd
Merge pull request #1798 from ntavish/papyr
...
Add support for Electronut Labs Papyr.
2019-04-16 10:13:19 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
7573da03f6
Merge pull request #1779 from dhalbert/nrf-nvm-2
...
nrf nvm: touchups to nickzoic PR #1768
2019-04-15 14:23:35 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
19278e0284
Merge pull request #1736 from nickzoic/circuitpython-nickzoic-1046-nrf-rtc-2
...
Circuitpython nickzoic 1046 nrf rtc 2
2019-04-02 17:38:24 -04:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
e254597c24
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-28 17:27:59 -07:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
54a41e0812
Merge branch 'master' into circuitpython-nickzoic-1046-nrf-rtc
2019-03-28 14:48:10 +11:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
7bac10ab6e
Merge pull request #1700 from ITACAInnovation/master
...
uChip board support for Circuitpython environment
2019-03-25 14:05:12 -04:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
8543695f9d
Merge pull request #1653 from python-ugame/master
...
Add frozen stage module to ugame10 board
2019-03-19 09:42:20 -07:00
9cceea0d68
nrf: fix internal flash writes
2019-03-18 09:11:40 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
3f6713abc1
Fix unix build by using safe mode stub
2019-03-12 11:56:35 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
cfb54f0263
Merge pull request #1638 from dhalbert/disable-SPIM3
...
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 10:57:56 -07:00
c4586c0531
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 08:31:03 -04:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
e3606461c5
Merge pull request #1558 from siddacious/bmp_bitdepths
...
initial support for additional bitdepths in OnDiskBitmap
2019-02-24 13:21:54 -05:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
d218069f03
Merge pull request #1584 from tannewt/disable_concurrent_write_protection
...
Add option to disable the concurrent write protection
2019-02-21 17:15:50 -05:00
ed1ace09e9
Fix unix build by using filesystem stub
2019-02-21 13:23:28 -08:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
5ec92415b0
fix module weak links; add missing nrf features
2019-02-17 17:29:28 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
72c03268a4
remove circuitpy_rules.mk; not used
2019-02-15 19:24:34 -05:00
5a32c88db3
merge from upstream and move ure options;make translate
2019-02-15 19:19:52 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
77ff17cc8d
atmel-samd: Enable extra ure functionality on Express boards
...
This enables ure.sub(), Match.span/start/end() and the
ure.Compile.search/match() pos/endpos arguments.
2019-02-14 15:42:46 +01:00
9cdffe5e8c
atmel-samd: Remove samd module from SAMD21 builds
...
Remove the samd module which has representations of the clocks.
This is done to save on precious flash.
2019-02-14 15:42:32 +01:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
a1a4959071
Merge pull request #1541 from dhalbert/nrf-two-uarts
...
nrf: Add second UARTE to busio.UART. Init uarts on startup.
2019-02-13 17:31:55 -08:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd.
2019-02-11 20:55:06 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
63d456127b
Merge pull request #1508 from adafruit/tannewt-patch-8
...
Fix up board build
2019-01-31 14:22:32 -05:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
323108e2ba
Merge pull request #1503 from hathach/nrf-tinyusb-sd
...
update tinyusb, work better with sd
2019-01-31 10:36:12 -05:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
a51f2b0716
refactor nrfx from supervisor/usb.c
2019-01-30 22:30:23 +07:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
d1fb384a4a
update tinyusb, work better with sd
2019-01-29 21:03:18 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
f46ec0253d
Merge pull request #1484 from larsks/issue/1483
...
tell people that esp8266 is no longer supported
2019-01-22 13:24:51 -08:00
3d3c50f927
tell people that esp8266 is no longer supported
...
Closes #1483
2019-01-22 15:40:00 -05:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
58a2009cc1
Fix unix build
2019-01-18 12:52:27 -08:00
0318a9a9bc
More make_new fixes for unix build
2019-01-18 11:53:09 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
076ddfd66b
Merge pull request #1474 from ladyada/master
...
more pyportal pins
2019-01-16 11:11:56 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
91452ec9cb
Mention the MDK USB Dongle.
2019-01-15 21:24:36 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
a14762a16c
Add support for rendering a shape.
...
Fixes #1171
2019-01-14 17:29:15 -08:00
f667d4d887
Update mpconfigboard.mk
...
oops, forgot to change those when i copied the folder
2019-01-14 14:43:34 -05:00
ffe734edf7
Fresh combined checkin of _pixelbuf library.
2019-01-13 23:51:13 -05:00
ef6c9e7df6
removed commented code
2019-01-12 23:19:40 -05:00
309a02efa1
added datalore ip m4 to boards
2019-01-12 23:06:12 -05:00
5f9980fb6b
support winbond 8MB chips on all boards that might use them
2019-01-12 13:24:35 -05:00
6eecf96710
Use correct SERCOM for SDA/SCL on Grand Central
2019-01-11 19:06:46 -05:00
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal
...
Enable the display on pyportal
2019-01-11 10:33:16 -08:00
b2cec6275c
Fix screen rotation and reset pin
2019-01-11 00:10:41 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
19db886645
Support the display on the pyportal.
...
Also fix #1390 , reload during sleep broken.
2019-01-10 17:29:34 -08:00
516d7da641
Merge pull request #1449 from tannewt/midi
...
Add USB MIDI support for SAMD and nRF.
2019-01-10 19:49:33 -05:00
bbf77a7efb
Merge branch 'master' into master
2019-01-10 12:50:05 -06:00
ee410b2cf1
Merge branch 'master' into nrf52_pulsein
2019-01-10 10:54:40 +07:00
d3b8581ce0
fix merge conflicts; address some comments
2019-01-09 19:59:48 -05:00
5c15a19c32
Added SparkFun SAMD21 Mini port
2019-01-09 16:12:43 -06:00
b5e40f52c2
Add USB MIDI support for SAMD and nRF.
...
The API should be identical to using a UART for MIDI.
Fixes #672
2019-01-09 14:02:11 -08:00
d41ed768dc
Fix sphinx build issues; add better travis fold reporting; update author info
2019-01-09 16:22:19 -05:00
89af666093
fix sphinx complaint; more travis fold status reporting
2019-01-09 10:36:38 -05:00
f366e3feea
Merge branch 'master' into nrf52_pulsein
2019-01-09 20:39:35 +07:00
cfc4c8cbfa
minor clean up
2019-01-09 15:43:54 +07:00
db82160eef
fix pulsein incorrect compute
2019-01-09 15:15:30 +07:00
0599fbf7d8
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2019-01-08 16:40:12 -05:00
13d607698e
m_tx_in_progress might underflow (check on this)
2019-01-08 16:37:14 -05:00
50641c4152
remove debugging printf's
2019-01-08 15:52:21 -05:00
f66f55b4ed
add CharacteristicBuffer; UART seems to work!
2019-01-07 22:46:20 -05:00
a00420bafd
Added pinout for SparkFun SAMD21 Mini Breakout on README.
2019-01-07 17:26:38 -06:00
d3aeca104e
Initial pass at pyportal board define.
2019-01-07 14:56:54 -08:00
180c7b4b79
Trying iframe in rst again^3.
2019-01-07 16:35:47 -06:00
4d3ae04e2b
Trying iframe in rst again again.
2019-01-07 16:31:52 -06:00
04b9a789ff
Trying iframe in rst again.
2019-01-07 16:28:14 -06:00
2df3e7b0fc
Updated README with embedded spreadsheet
2019-01-07 16:25:34 -06:00
215008f78c
clean up neopixel write !!
2019-01-08 00:21:31 +07:00
a77b2363ef
evt handler list bugs; unique evt handler names; remove uuid128_reference
2019-01-03 21:42:42 -05:00
8dea6f53bb
forgot to store data when reading a gatts value
2019-01-03 14:16:41 -05:00
87c6f33bcc
Broadcaster now takes whole packet. Also should be scannable
2019-01-01 14:11:59 -05:00
941ccf87c8
don't free event handler list manually; let gc do it
2018-12-31 09:02:43 -05:00
b6b5ed9c89
Remove nRF52832 support
2018-12-30 22:49:20 -05:00
1dc3957e72
LocalPeripheral is now Peripheral; more work on basic GATTS support; UART not working yet
2018-12-30 22:33:49 -05:00
ef39e72c7c
free event handlers on reset; fix typo in Broadcaster
2018-12-29 13:55:10 -05:00
de7cadb9b2
fix typos in internal_flash.c
2018-12-29 00:08:04 -05:00
145e110915
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-29 00:00:39 -05:00
4d1f0ec07b
Add Broadcaster. Reset correctly on reload.
2018-12-28 23:34:23 -05:00
6b0d93cea3
correct i2c max len
2018-12-28 21:14:27 +07:00
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits)
2018-12-28 16:30:11 +07:00
3ee766bc01
put received bytes to fifo when error
2018-12-28 01:05:30 +07:00
d092722ae8
fix #1407 keep receiving in case of error
2018-12-28 00:40:29 +07:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
4167bf5b24
wip: advertising works, but not connection
2018-12-27 00:04:04 -05:00
f5b15c9b4d
Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev
2018-12-21 21:28:24 -05:00
0dfe2dbff0
return error status on more routines; minor simplification of freq setting
2018-12-21 12:30:54 -05:00
bce6d124af
Don't check for corrupt heap too early; Fix QSPI timing
2018-12-20 21:28:36 -05:00
a9f0b31a15
Update README.rst
...
https://github.com/adafruit/circuitpython/issues/1410
2018-12-19 13:25:18 -05:00
6752266673
added pulsein using gpiote (gpio interrupt)
2018-12-18 22:05:17 +07:00
bfa66861ef
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-13 16:33:15 -05:00
b37b2fa7e7
overwrite old data if fifo is full
2018-12-13 23:56:06 +07:00
e136222ae2
use rbuf for busio uart
2018-12-13 23:48:53 +07:00
69bb4ae670
Merge pull request #1397 from ShawnHymel/master
...
Added board support for Arduino MKR Zero
2018-12-11 13:09:27 -08:00
29f9794dcf
Curly brace change to make it more consistent
...
And to queue Travis
2018-12-11 11:57:52 -08:00
70939ad517
Merge pull request #1395 from jerryneedell/jerryn_cpython
...
enable MICROPY_CPYTHON_COMPAT
2018-12-11 10:54:17 -08:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
1dc4c4757e
touchio.TouchIn sensing working on a single pin! adafruit/circuitpython#1048
2018-12-11 14:33:35 +11:00
a90343022a
enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds
2018-12-10 16:35:40 -05:00
901db4797e
progress on NRF touchio.TouchIn #1048
2018-12-09 16:48:33 +11:00
f8ded46ad6
Merged field in pin table in README.
2018-12-08 17:42:42 -06:00
4c81d9a9ac
Added SD_CD pin definition
2018-12-08 17:40:46 -06:00
801d9a5abc
Fix running the USB task on nRF.
...
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
2018-12-07 16:11:21 -08:00
a7a24096f4
bleio WIP: redo for more immutability; use sd_* routines for internal flash write
2018-12-07 16:52:47 -05:00
df84da5913
Stub out serial_write as well
2018-12-07 09:32:37 -08:00
808ca676b6
Fix unix
2018-12-06 17:12:30 -08:00
332ea8853f
Macro guard VDDH inclusion.
2018-12-06 16:38:14 -08:00
817766acdc
Use the stub for ESP8266 as well.
2018-12-06 15:47:16 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
125901e4e2
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-12-06 12:41:38 -05:00
7ad2e6ace3
Add stack validity check and raise an error when it happens.
...
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.
In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.
This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
2018-12-04 23:26:04 -08:00
f59c3bd726
Add flag comment
2018-12-04 18:22:23 -08:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
3f5d917b39
Update submodules to merge commits
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
452a622459
Set up structure for touchio adafruit/circuitpython#1048 (does nothing yet)
2018-12-04 17:12:02 +11:00
7f6da78be3
Merge pull request #1344 from bwshockley/master
...
Add Mini SAM M4 board.
2018-12-03 17:37:23 -05:00
80db2cec99
UART changes: timeout in secs, write bytes, etc.
2018-12-03 12:04:32 -05:00
3d597aae92
Added MKR Zero board definition.
2018-12-02 18:07:19 -06:00
9aebe2f1ef
Merge branch 'master' into master
2018-11-30 20:49:55 -08:00
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b
2018-11-30 15:09:15 -08:00
48928d4b25
Auto build and a couple pin fixes
2018-11-30 15:08:06 -08:00
3fa8796668
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 15:01:03 -08:00
77760090e2
Fix up spi flash define
2018-11-30 14:55:06 -08:00
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam
2018-11-30 14:40:01 -08:00
09316b35d7
remove non-broken-out nrf pins. re-organize pins.c list.
2018-11-30 14:58:36 -07:00
6e15ab6385
Stop ignoring SD hex files and improve the error when its missing.
2018-11-30 13:26:12 -08:00
df18d22a93
Capture stderr as well and work on nRF build
2018-11-30 12:59:05 -08:00
f67814fc97
Adding SparkFun nRF52840 Mini board support.
2018-11-30 13:57:22 -07:00
cf70dc4f1c
Fix BLE build
2018-11-30 11:53:33 -08:00
56345ff997
A few tweaks based on review feedback
2018-11-30 10:58:27 -08:00
9d07e95351
Add support for adding release info into adafruit/circuitpython-org
...
This also changes the build script to python with better output.
2018-11-30 00:30:57 -08:00
c47c495aca
Merge pull request #1329 from notro/oserror_errno
...
Support OSError subclasses and attributes
2018-11-27 22:35:54 -08:00
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick
...
Added board Electronic Cats CatWAN USB Stick
2018-11-27 11:58:26 -08:00
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson
...
json: enable on nrf boards and "large flash" M4 samd boards
2018-11-27 11:29:29 -08:00
d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
3164b16196
WIP: debug; add hash and __eq__ to UUID
2018-11-26 21:09:17 -05:00
1da2425612
Add Electronic Cats CatWAN USB Stick
2018-11-26 14:39:58 -06:00
6fb7590280
Merge remote-tracking branch 'adafruit/master' into bleio-rev
2018-11-26 10:16:29 -05:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
324301e3bc
Update tinyusb to include control fixes.
2018-11-23 13:28:10 -08:00
52fd151c9c
ports/nrf: enable json module on nrf boards generally
2018-11-22 10:35:57 -06:00
78972cc879
ports/atmel-samd: enable json module on M4 boards with lots of flash
2018-11-22 10:35:44 -06:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
1763ffe245
More UUID work; use mp_raise for exceptions
2018-11-20 23:04:58 -05:00
69eb2efced
Update devices.h
2018-11-20 13:21:43 -06:00
7d1a62e4ba
Update for Grand Central Rev B
2018-11-20 10:54:13 -08:00
c344d48840
Update devices.h
2018-11-20 12:44:12 -06:00
31cc71f7fb
WIP: bleio revisions
2018-11-20 09:36:45 -05:00
acb9bd7618
Cleanup for Mini SAM M4 Only
...
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
2018-11-16 09:46:08 -06:00
11de8fdca7
merge 3.x swap of /lib and .frozen; update frozen libs
2018-11-15 15:00:23 -05:00
b67c53edfa
Factor out of external flash as well.
...
Plus some cleanup.
Fixes #1324
2018-11-14 18:30:47 -08:00
87ddd64481
Factor out fake partition
2018-11-14 17:59:11 -08:00
47212ee31e
start debug
2018-11-14 17:21:48 -08:00
704d0c606b
samd51: Support more uerrno errno values
...
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
2018-11-13 22:07:05 +01:00
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels
...
Clear Trellis NeoPixels on board reset.
2018-11-13 15:03:25 -05:00
4ae4cc11e0
Clear Trellis NeoPixels on board reset.
...
This makes it easier to change code in cases where the pixels may
cause a brownout.
2018-11-13 11:27:18 -08:00
a3a690dc01
Add pragma to ensure neopixel_write is always -Os
2018-11-13 10:56:00 -08:00
ed9db80760
Switch SAMD51 back to -Os
...
It messes up neopixel timing otherwise.
Fixes #1326
2018-11-13 10:43:18 -08:00
355abc835e
Fix output overflow and make help translatable
2018-11-09 16:41:08 -08:00
43f7ca7985
Incorporate feedback:
...
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
2018-11-09 11:33:56 -08:00
688f0e388b
Update MKR1300 board definition too
2018-11-09 00:49:02 -08:00
be6b49c712
Add back internal flash header and slim it down.
2018-11-09 00:27:18 -08:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
f24c225664
Merge pull request #1312 from dhalbert/adafruit_nrfx
...
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-11-04 11:42:12 -08:00
6aca9762c9
Merge pull request #1313 from siddacious/master
...
adding support for the CP32-M4
2018-11-04 11:26:14 -08:00
a15ed0b912
Fix Trellis M4 DotStar pin assignments.
2018-11-04 00:07:42 -04:00
bd4188a092
adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh
2018-11-03 14:42:27 -04:00
4f2f571536
Adding the serial_bytes_available() method to the 3.x branch
2018-11-03 14:01:30 -04:00
4dfba2f8ac
put .frozen before /lib in sys.path; update frozen libraries
2018-11-01 19:57:10 -04:00
844b674a1e
adding support for the CP32-M4
2018-11-01 09:42:48 -07:00
e203ce9ce5
Use adafruit/nrfx fork of NordicSemiconductor/nrfx
2018-10-31 23:18:59 -04:00
dc82fd556b
Updating devices.h to add new devices, fix a typo and address #1239
2018-10-31 01:54:09 -07:00
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300
...
Add board MKR1300 by Arduino
2018-10-26 20:15:20 -04:00
aec39fd027
Updated to new D21G18 MCU
...
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
2018-10-26 12:09:59 -05:00
bbf8334166
Fix build without network code
2018-10-25 13:14:27 +11:00
f6482699a0
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-25 12:20:50 +11:00
dc9d338612
Merge pull request #1167 from notro/cpython_stdlib
...
Support CPython standard library
2018-10-24 12:57:41 -07:00
d882ff6328
samd51: Set stack size to 8k
...
This is necessary in order to run unittest.
Heavy tests like those in the stdlib need 12-14k.
2018-10-24 19:33:01 +02:00
1b86e5fc83
samd51: Enable functionality to support CPython stdlib
...
This enables various things in order to support the CPython standard library.
MICROPY_PY_BUILTINS_NOTIMPLEMENTED:
Support NotImplemented for easy conversion of stdlib.
It doesn't do fallbacks though, only raises TypeError.
MICROPY_PY_COLLECTIONS_ORDEREDDICT:
collections.OrderedDict
MICROPY_PY_FUNCTION_ATTRS:
Support function.__name__ for use as key in the function attribute workaround.
MICROPY_PY_IO:
uio module: BytesIO, FileIO, StringIO, TextIOWrapper
Also add 'io' alias.
MICROPY_PY_REVERSE_SPECIAL_METHODS:
Support the __r*__ special methods.
MICROPY_PY_SYS_EXC_INFO:
sys.exc_info() used by unittest when collecting exceptions.
MICROPY_CPYTHON_COMPAT:
Some of the things it adds:
>>> object.__init__
<function>
>>> object.__new__
<function>
>>> object.__class__
<class 'type'>
>>> object().__class__
<class 'object'>
>>> object.__name__
'object'
>>> 'Hello'.encode()
b'Hello'
>>> b'Hello'.decode()
'Hello'
Named tuple field names from string:
namedtuple('Point', 'x y')
2018-10-24 19:33:01 +02:00
cec9a69a15
samd51: Make errno, os, and time module aliases
...
Add alias for uerrno so the user doesn't have to know about the
CircuitPython special names for the module.
Make os and time weak modules (aliases) making it possible to add
functionality to those modules written in python.
Example:
'import os' will now look in the path for an os module and if not found
it will import the builtin module. An os module written in python will
import the builtin module through its name prefixed with an underscore
(_os) following the C module naming practice in CPython.
Also right align the macro values to increase readability making it
easier to compare the values for samd21 and samd51. Even the longest
macro from py/mpconfig.h will fit with this alignment.
2018-10-24 19:31:53 +02:00
554f82fe9b
Merge pull request #1286 from klardotsh/topic-nrf52840-mdk
...
Add support for MakerDiary nRF52840 MDK board
2018-10-22 17:47:14 -07:00
f0d7073a12
Add Arduino MKR1300
2018-10-22 19:38:24 -05:00
4bc24c4f60
bleio: Fix errors after rebase
2018-10-21 17:15:27 +02:00
eceb21a017
bleio: Don't register the services until needed
...
Because of the very specific way nRF requires service registration
(characteristics can be added only to last added service), we would
have to write the Python code in a specific way. With this patch the
user has more freedom.
2018-10-21 16:00:04 +02:00
19fab4af5a
bleio: Remove deep copy constructor for UUID
2018-10-21 15:59:50 +02:00
b5e5805bb4
bleio: Remove redundant struct field
2018-10-21 15:59:46 +02:00
c7b42d80b3
bleio: A bit of cleanup
2018-10-21 15:59:42 +02:00
cf79316002
nrf: Fix ble uart using the new API
2018-10-21 15:59:36 +02:00
d5a71a4b8a
nrf: Move bluetooth driver to the 'bluetooth' folder
2018-10-21 15:55:25 +02:00
17f13ecc2c
nrf: Cleanup of the ble driver
...
Moved the functions to classes that they belong to.
2018-10-21 15:54:13 +02:00
77eeecbfd9
nrf: BLE driver cleanup
2018-10-21 15:52:36 +02:00
6545aa99a9
nrf: Remove the ble drv specific characteristic struct
2018-10-21 15:51:04 +02:00
98aa8c5923
nrf: Remove the ble drv specific service struct
2018-10-21 15:51:01 +02:00
3df7dea2cc
nrf: Remove the ble drv specific advertisement data struct
2018-10-21 15:50:59 +02:00
4b344812bf
nrf: Remove the ble drv specific address struct
2018-10-21 15:50:56 +02:00
3bd65fbae5
nrf: Move the Peripheral class to bleio as Device
...
This was the last class from ubluepy and so that module is now gone.
The Device class offers both Peripheral and Central functionality.
See the inline docs for more info.
2018-10-21 15:50:45 +02:00
bda734223e
nrf: Move the Service class from ubluepy to the shared bleio module
2018-10-21 15:43:51 +02:00
cc78249226
nrf: Move the Characteristic class from ubluepy to the shared bleio module
2018-10-21 15:43:48 +02:00
61bf4a16a7
nrf: Remove unused ubluepy classes
2018-10-21 15:43:39 +02:00
1c6bf9a150
bleio: Move the Scanner class to a shared module
2018-10-21 15:43:29 +02:00
7390dc7dab
bleio: Move ScanEntry to shared module and add a new AdvertisementData class
2018-10-21 15:43:24 +02:00
345334aaf1
bleio: Add a new Address class
...
Use the new in the Adapter singleton.
2018-10-21 15:43:21 +02:00
d5f942a971
bleio: Add a AddressType enum-like class
2018-10-21 15:43:17 +02:00
20b8d5169d
nrf: Move the Descriptor class from ubluepy to the shared bleio module
2018-10-21 15:43:13 +02:00
f4940c9aec
nrf: Move the UUID class from ubluepy to the shared bleio module
...
Also added a UUIDType enum-like class for determining UUID type.
2018-10-21 15:43:08 +02:00
aefabc5353
Update docs to reflect proper size of device
2018-10-20 03:29:20 -07:00
4c75a60bd3
Declobber a DEFINE
2018-10-20 02:57:17 -07:00
16ca9c8c7c
Makefile fixes and some docs
2018-10-20 02:43:13 -07:00
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK
2018-10-20 02:43:12 -07:00
5d190a5615
Update mpconfigboard.h
...
Corrected NVM size.
2018-10-19 21:18:19 -05:00
548e6893cd
Create pins.c
2018-10-19 21:16:21 -05:00
88fd5d7daa
Create mpconfigboard.mk
2018-10-19 21:15:50 -05:00
1593f4e3a8
Create mpconfigboard.h
2018-10-19 21:14:46 -05:00
6d974593c7
Create board.c
2018-10-19 20:52:23 -05:00
b436666e85
Merge pull request #1272 from sajattack/battery
...
add pin def for BAT
2018-10-17 12:15:38 -07:00
298756eef8
Merge pull request #1280 from tannewt/precondition_dac
...
Ramp values to and from a default value while active.
2018-10-17 15:00:11 -04:00
8161178415
Merge pull request #1275 from ElectronicCats/board-meowmeow
...
Added board Meow Meow by Electronic Cats
2018-10-17 11:41:57 -07:00
4eb1fe18e5
Tweaks from feedback:
...
* default_value is now quiescent_value
* Use step = -step format for sign switch
* Add note about analogout_reset being empty
2018-10-17 11:31:08 -07:00
c209165d43
Ramp values to and from a default value while active.
...
This reduces the popping sound on initial playback of an audio
sample.
The M4 DAC has a pop on startup that cannot be prevented. It also
does not allow readback so current values of the DAC are ignored.
Fixes #1090
2018-10-16 16:23:29 -07:00
089e2cc099
remove BATTERY from itsybitsy
2018-10-16 14:55:21 -07:00
c69b67f453
Merge pull request #1277 from dhalbert/nrf-pulseout
...
PulseOut working
2018-10-16 10:19:55 -07:00
b3c7746a7f
fix copyright notice
2018-10-16 11:09:37 -04:00
2262efc311
PulseOut working
2018-10-16 11:05:02 -04:00
a15f3361aa
add mechanism for timer ticks in NICs
2018-10-16 23:09:25 +11:00
c103a05579
Add board Meow Meow by Electronic Cats
...
https://github.com/ElectronicCats/MeowMeow
2018-10-15 19:17:04 -05:00
1447df3fa6
change BAT to BATTERY
2018-10-14 23:34:49 -07:00
f1028b5f96
add pin def for BAT
2018-10-13 15:53:22 -07:00
8b531f3fba
Merge pull request #1263 from tannewt/trellis_m4_revD
...
Support rev D for the Trellis M4 Express
2018-10-10 23:34:59 -04:00
aab28748bb
Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native
2018-10-11 14:19:10 +11:00
8d75c3d339
Changed to only build wiznet for {feather|metro}_m[04]_express
2018-10-11 13:42:26 +11:00
e5d2fae801
Merge pull request #1261 from jepler/esp8266-prebuilt-sdk
...
esp8266/README: comment on the specific binary SDK used
2018-10-10 12:03:12 -07:00
b5e26130d7
Support rev D for the Trellis M4 Express
2018-10-10 11:21:35 -07:00
8d58093328
Merge pull request #1259 from dhalbert/nrf-pwmout
...
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-10 12:27:27 -04:00
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master
...
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
2018-10-09 23:58:43 -07:00
ca737e6f7c
Don't disable tempoarily in deinit().
2018-10-09 21:23:47 -04:00
012cc466a4
esp8266/README: comment on the specific binary SDK used
2018-10-09 20:17:38 -05:00
91a88cf568
Allow variable freq PWMOut; use multiple channels if same freq
2018-10-09 20:52:55 -04:00
9f94712ad1
replacing change to input() with separate method to check for USB Serial input
2018-10-09 18:37:52 -04:00
a647ab83df
Merge remote-tracking branch 'adafruit/master' into mixer
2018-10-09 13:31:17 -07:00
a60700b1c5
Get DHCP working ...
2018-10-09 16:28:30 +11:00
6e624b9c6a
Split wiznet.WIZNET5K off into its own file
2018-10-09 13:05:58 +11:00
fd0ea85549
add force_create to nrf filesystem_init()
2018-10-06 08:03:27 -04:00
2b0356c61f
Disable framebuf by default on express builds.
2018-10-05 15:19:09 -07:00
76008ce304
Introduce audioio.Mixer which can mix multiple audio samples
...
to produce a single sample.
Only works with 16 bit samples on the M4.
Fixes #987
2018-10-05 15:12:23 -07:00
21ddb6b9b9
fix tinyusb cdc issue
2018-10-05 21:37:16 +07:00
091c5106ef
Cleanup Files
2018-10-04 21:26:28 -05:00
62d316bffb
W25Q16JV IQ and IM
...
Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.
2018-10-04 21:26:05 -05:00
2ef29c2cec
Changed FLASH DEVICE
...
Changed the flash device to W25Q16JV_IM - the type actually used.
2018-10-04 21:14:07 -05:00
f6b9f101dc
Added W25Q16JV_IM
...
Added new flash module: W25Q16JV_IM
2018-10-04 21:13:05 -05:00
15b59bee1b
change initialization method + mod_network names
2018-10-04 22:31:47 +10:00
f9bda0ff93
Makefile & mpconfigport for atmel-samd with wiznet
2018-10-04 22:02:25 +10:00
6049776b26
Merge branch 'master' into nrf52_uart_io
2018-10-03 13:31:48 -04:00
86ae707b08
Merge pull request #1223 from dhalbert/spi-baudrate
...
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
2018-10-03 10:11:44 -07:00
b8884ccc8b
Merge branch 'master' into nrf52_uart_io
2018-10-03 23:13:56 +07:00
d79b0a6b17
Merge pull request #1232 from platipo/master
...
Fix 'advertisement' typo
2018-10-03 09:14:28 -04:00
4b9099358f
Fix 'advertisement' typo
2018-10-03 09:56:30 +02:00
08cbb03bdd
implement common_hal_busio_uart_clear_rx_buffer
2018-10-03 11:39:01 +07:00
f543c8415d
"busio.UART not yet implemented -> not available
2018-10-03 11:30:31 +07:00
21d331c8cc
round SPI freq down; check max freq
2018-10-02 21:06:40 -04:00
036a1490e3
Merge pull request #1227 from tannewt/trellis_m4
...
Update Trellis M4 Express for Rev C
2018-10-02 20:33:27 -04:00
3c743f2664
Update Trellis M4 Express for Rev C
2018-10-02 11:56:09 -07:00
aa95526428
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
2018-10-01 18:54:13 -04:00
1f3a3fe5a0
Merge remote-tracking branch 'upstream/master'
2018-10-01 12:28:42 -05:00
862d5a06fd
Create pins.c
2018-09-29 23:33:07 -05:00
8e52d922cc
Create mpconfigboard.mk
2018-09-29 23:26:15 -05:00
5ab4f09b2f
Create mpconfigboard.h
2018-09-29 23:24:32 -05:00
4acca8b90b
Update board.c
2018-09-29 23:17:24 -05:00
13364f90fe
Create board.c
2018-09-29 23:16:07 -05:00
48a3aafdd2
reset I2C and SPI on ctrl-D
2018-09-25 15:12:10 -04:00
76d6fb03f0
more clean up
2018-09-26 02:12:06 +07:00
eba80f7a99
update translate string
2018-09-26 02:10:44 +07:00
52328c88cd
remove space
2018-09-26 02:06:32 +07:00
74cc55b107
change error type to runtime
2018-09-25 17:31:53 +07:00
f724647a45
fix feather nrf52840 build error
2018-09-25 17:09:54 +07:00
dec5c50c45
clean up
2018-09-25 16:22:14 +07:00
2f0e0bdcaf
migrate serial from uart to uarte
2018-09-25 16:14:44 +07:00
9017c9d29a
clean up
2018-09-25 14:29:45 +07:00
d3e5ba83eb
update nrfx to 1.3.0
2018-09-25 13:00:57 +07:00
d714479924
clean up
2018-09-25 12:48:48 +07:00
01c1296197
nrf52 uart io rx work reliably
2018-09-25 12:37:31 +07:00
1782ceab35
uarte malloc if buffer is not in SRAM
2018-09-24 16:18:49 +07:00
4015023e01
clean up uart io
2018-09-24 16:12:05 +07:00
7bbd449f06
uarte rx work fine
2018-09-24 15:54:32 +07:00
fdd3e91753
changing to nrf uarte, tx works fine
2018-09-24 14:56:52 +07:00
7a1b4ccc9b
Merge branch 'master' into nrf52_uart_io
2018-09-24 12:50:48 +07:00
f2c960e89b
Merge pull request #1205 from hathach/nrf52_autoreload
...
add autoreload for nrf52
2018-09-21 16:48:21 -04:00
e1fe7e71a1
add autoreload
2018-09-22 02:08:00 +07:00
a9d094ab74
Fix translations
2018-09-21 12:24:04 -04:00
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x
2018-09-21 12:22:26 -04:00
2c15d12f2f
allow multiple I2C and SPI; improve nrfx_config.h
2018-09-20 20:45:30 -04:00
816ff05253
clean up
2018-09-21 03:53:35 +07:00
dddc437ea7
got rx working finally
2018-09-21 03:48:13 +07:00
fe1a297889
still have issue with initial uart rx
2018-09-21 01:27:52 +07:00
2309e60c0d
WIP; problem with staticly allocated IRQ handlers
2018-09-19 21:59:04 -04:00
9c25306877
uart rx got some issue with irq
2018-09-20 02:12:21 +07:00
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master
...
3.x master
2018-09-19 09:58:52 -07:00
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin
...
Add VOLTAGE_MONITOR pin to feather boards pins
2018-09-18 21:47:09 -04:00
655f223916
Clock the SAMD21 much faster so it can actually convert at its max
...
sample rate of 350ksps.
Also added an error check of sample rate.
Fixes #1196
2018-09-18 15:29:46 -07:00
56b7f3ba64
fix translate omission; pca10059 fix in .travis.yml
2018-09-18 16:28:27 -04:00
bc510e714f
merge 3.0.2 to master
2018-09-18 15:38:12 -04:00
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
aaa61d06e3
add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen
2018-09-17 22:22:23 -04:00
53853289eb
Move VOLTAGE_BATTERY line just under D9 line
2018-09-14 09:02:04 +02:00
521a14e942
add mic in / out
2018-09-13 21:50:43 -04:00
994c066b21
rev B (minus microphone)
2018-09-13 21:34:39 -04:00
bec42671b1
missin' reset pin for the radio. tested works.
2018-09-13 21:30:13 -04:00
28aabb4d5c
trellis m4 variant
2018-09-13 21:30:13 -04:00
7e8816ad6f
Add VOLTAGE_MONITOR alias to pin D31/A7
2018-09-13 23:46:47 +02:00
8eda4bb473
Add VOLTAGE_MONITOR alias for D9 pin to feather boards
2018-09-13 23:36:04 +02:00
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements
...
UART enhancements
2018-09-12 16:23:28 -07:00
6a72084198
fix nrf builds; sphinx 1.8.0 crashing: use lower version
2018-09-12 18:37:03 -04:00
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk.
...
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.
Fixes #1182
2018-09-12 15:25:59 -07:00
6a046f55c4
UART fixes and enhancements; default board object fix
2018-09-12 17:19:43 -04:00
2bd7040fe0
usb_write() output_len was uint8_t instead of uint32_t
2018-09-12 17:16:52 -04:00
02b3f62460
When UART timeout of zero is given, make read() return data already available
2018-09-12 13:25:49 -04:00
b923324e73
Added HW NEOPIXEL Definition
...
Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
2018-09-12 07:59:07 -05:00
c3918bae57
PWMOut was not claming channels on shared TCCs
2018-09-11 19:46:47 -04:00
2138b04e45
Update to IS25LP016D
...
Changed .supports_qspi_write to true.
2018-09-11 07:52:23 -05:00
c7cf38186d
Added IS25LP016D
2018-09-10 14:55:18 -05:00
08a2d962e3
Delete README.md
2018-09-10 17:01:31 +00:00
b2f5511de2
Initial Upload of Mini SAM M0
...
Initial Upload of Mini SAM M0
2018-09-10 17:01:00 +00:00
b03037e512
Create README.md
2018-09-10 16:55:55 +00:00
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral
...
Initial Grand Central definition
2018-09-07 15:00:13 -04:00
3ac03a31d8
Fix SDA/SCL
2018-09-07 10:39:18 -07:00
32c616b5dd
Initial Grand Central definition
...
It has a ton of pins in a Mega form-factor
This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
2018-09-06 16:54:13 -07:00
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing
2018-09-06 14:54:55 -07:00
1683eb913d
Minor tweaks based on feedback
2018-09-06 14:49:49 -07:00
100603a60b
neopixel_write merge; alphabetize stuff in Makefile
2018-09-05 17:38:59 -04:00
4c3b4cacfa
Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming
2018-09-05 13:15:22 -04:00
a0872e8761
Merge pull request #1161 from hathach/nrf52_neopixel
...
Nrf52 neopixel
2018-09-05 08:09:07 -04:00
ccd87a33b6
use nrf_pwm instead of direct registers
2018-09-05 13:18:36 +07:00
b5c03a7085
generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t
2018-09-04 16:43:21 -04:00
f4a98e909c
fix nrf52832 build 2
2018-09-04 23:25:08 +07:00
b9e8e3cd1f
fix nrf52832 build
2018-09-04 20:54:36 +07:00
1fe3ed87eb
run background job while waiting for neopixel write seqend
2018-09-04 19:24:45 +07:00
0d92c65829
correct disconnection check to only dtr
2018-09-04 18:36:08 +07:00
3ae24d9f9a
add neopixel_write implementation, work ok
2018-09-04 18:33:08 +07:00
e17253071e
adding neopixel write
2018-09-04 15:51:49 +07:00
2d3f1a10bf
When UART timeout of zero is given, make read() return data already available
2018-09-01 17:07:30 +00:00
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
0e8d146184
wip
2018-08-31 18:05:55 -04:00
121903b6ee
Tweaks based on feedback
2018-08-31 14:21:48 -07:00
6697544cdf
Introduce displayio to render graphics to displays.
...
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.
This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
2018-08-31 12:31:52 -07:00
93100a7517
Merge pull request #1146 from hathach/nrf52_usb_serial_bug
...
update tinyusb to fix #1007 serial issue
2018-08-28 15:39:34 -04:00
87811ec3a0
update readme board name feather_nrf52832
2018-08-28 16:15:20 +07:00
569a050e82
Merge pull request #1143 from notro/stat_epoch_fix
...
Fix os.stat() epoch and use RTC for file timestamp
2018-08-26 22:22:45 -07:00
ded38d30b6
rename pin.h to nrf_pin.h to avoid conflict with Pin.h
2018-08-26 20:37:12 -04:00
b61cf8d81f
samd: Use RTC to set file timestamp
...
Use RTC to set file timestamp for file operations done on the board.
2018-08-25 20:43:09 +02:00
e8b94d0024
adjust SAMD51 neopixel_write timing
2018-08-24 07:01:50 -04:00
4cc33f8de6
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
2018-08-23 16:25:57 -04:00
728622f09d
Merge pull request #1139 from hathach/nrf52_usb_serial
...
use unique DevicID for usb serial
2018-08-23 09:30:31 -04:00
4a8cd03de1
use unique DevicID for usb serial
2018-08-23 14:00:54 +07:00
fed1960424
remove s140 6.0.0 and s132 6.1.0 (not supported yet)
2018-08-23 00:27:39 +07:00
0c0ac06fc7
add SD 6.1.0 to download all
2018-08-22 23:09:09 +07:00
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
05ea9fd296
remove stray underscore
2018-08-22 10:26:52 -04:00
eaf4d19dbb
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
...
Merge #1137
2018-08-22 10:24:10 -04:00
a516d1123f
fix typos
2018-08-22 19:42:41 +07:00
02b1b53153
Merge branch 'master' into nrf52_dfu_touch1200
2018-08-22 15:24:12 +07:00
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
c503cf990b
forgot to change .travis.yml
2018-08-21 20:35:58 -04:00
85df32907f
rename nrf boards to feather_nrf52832 and feather_nrf52840_express
2018-08-21 18:45:37 -04:00
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
1c4accfa39
Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200
2018-08-21 15:17:03 +07:00
b7dd33b76e
add touch 1200 for dfu-flash
2018-08-21 15:15:44 +07:00
182a8d7120
Merge pull request #1131 from tannewt/hallowing3
...
Support Hallowing in 3.x
2018-08-20 18:26:07 -07:00
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff.
2018-08-20 18:04:35 -07:00
44de3d49a8
Speed up zero neopixel pulses.
...
SK6812 on 5v is pickier than WS2812 on 5v.
Hopefully fixes #1083 .
2018-08-20 17:04:46 -07:00
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-20 10:52:33 -07:00
1768057e87
add HalloWing
2018-08-20 10:52:24 -07:00
eefb6842a0
i2cslave: Fix missing translate() when raising exceptions
...
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
2018-08-18 16:00:06 +02:00
1a6f6ff8e4
Merge pull request #1122 from Jahor/patch-1
...
Fix PWM Support on port 1 of NRF52840
2018-08-17 16:54:03 -07:00
4a4d84ba42
Merge pull request #1064 from notro/i2cslave
...
Add busio.I2CSlave
2018-08-17 16:51:45 -07:00
18e9f74738
Fix PWM Support on NRF52840
...
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
2018-08-17 19:34:03 +12:00
e8cf6a9072
Update to merged peripheral change.
2018-08-16 18:05:53 -07:00
96534e598e
Fix unix coverage and update translations.
2018-08-16 17:41:53 -07:00
76e0373576
Fix nrf and unix
2018-08-16 17:41:38 -07:00
2cd166b573
Fix esp and samd
2018-08-16 17:41:35 -07:00
de5a9d72dc
Compress all translated strings with Huffman coding.
...
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.
Builds without LTO work as well but include both untranslated
strings and compressed strings.
This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531 .
2018-08-16 17:40:57 -07:00
11cbeb87ad
ports/atmel-samd: Implement i2cslave.I2CSlave
...
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
b6822b86ac
busio/I2C: Split out samd_i2c_get_sercom()
...
It will be shared with I2CSlave.
2018-08-16 17:06:40 +02:00
d8f2a61c39
Change hallowing to shipping flash type W25Q64JV-IQ. tested!
2018-08-14 13:04:33 -04:00
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings
...
Fixes and translate more strings.
2018-08-09 20:00:18 -04:00
24e53ad591
Rework escaping and fix ESP build.
2018-08-09 15:58:45 -07:00
86d2154d71
Change file mode back.
2018-08-09 09:14:14 -07:00
94c5ceab36
Initial SAMR board revision.
2018-08-09 05:36:46 -07:00
b0e33f6a11
atmel-samd: UART: allocate rx buffer in long-lived region
...
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.
However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
2018-08-08 19:21:57 -05:00
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel
...
Retune neopixel timings on SAMD51. They were too slow.
2018-08-07 21:33:12 -04:00
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow.
...
Fixes #1083
2018-08-07 16:58:37 -07:00
933add6cd8
Support internationalisation.
2018-08-07 14:58:57 -07:00
498fec64e2
increase new dynamic stack size to a comfortable value for now
2018-08-03 22:35:20 -04:00
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap
...
Add basic memory allocation outside Python runtime
2018-08-02 18:43:06 -04:00
5704bc8c93
Share memory.c and a bit of polish.
2018-08-02 14:35:46 -07:00
64e5691fe7
Update to peripherals merge.
2018-08-02 13:59:12 -07:00
168aa394db
Move pin struct to the peripherals library.
...
Its slimmed down by removing the qstr and bit packing TCC info.
The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
2018-08-02 13:59:05 -07:00
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity.
2018-08-02 11:07:22 -07:00
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing.
2018-08-02 00:51:52 -07:00
0bc3432106
Merge branch 'master' into nrf52_sys_module
2018-08-01 11:53:12 +07:00
65bd07bb0b
Merge pull request #1074 from hathach/nrf52840_usb_hid
...
Nrf52840 usb hid
2018-08-01 00:47:50 -04:00
592c190069
PR review clean up
2018-08-01 11:31:32 +07:00
8640d37149
try to address sys module, compile ok
2018-08-01 10:19:20 +07:00
200669216e
more clean up
2018-08-01 08:52:07 +07:00
bac233e99b
clean up
2018-08-01 08:47:41 +07:00
533d8dda96
fix samd usb hid typo
2018-08-01 08:40:04 +07:00
6ddd8583da
clean up
2018-08-01 08:20:20 +07:00
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-)
2018-07-31 12:42:21 -07:00
1e524f1b98
Merge branch 'master' into nrf52840_usb_hid
2018-08-01 00:58:23 +07:00
85bd46a4e1
enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS
2018-07-31 23:09:39 +07:00
4bece22c92
add hid keyboard LED indicator stub
2018-07-31 23:02:15 +07:00
05139e2aee
all hid devices seems to be ok
2018-07-31 22:54:26 +07:00
2c85f42330
add usb hid syscontrol
2018-07-31 21:57:00 +07:00
ef58adacd3
usb hid consumer control works
2018-07-31 21:19:02 +07:00
fd661c1d57
improve usb hid
2018-07-31 21:06:24 +07:00
b334289669
Reenable LTO for debug.
2018-07-31 05:18:23 -07:00
12cf5e51c2
Allow for resizing the stack area.
2018-07-31 05:18:23 -07:00
777542c716
Add basic memory allocation outside Python runtime
...
This allows for the heap to fill all space but the stack. It also
allows us to designate space for memory outside the runtime for
things such as USB descriptors, flash cache and main filename.
Fixes #754
2018-07-31 05:18:03 -07:00
27b2a9fe59
add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO
2018-07-31 17:50:32 +07:00
d15caf0dbd
hid keyboard and mouse work well
2018-07-31 16:42:04 +07:00
221d54a595
workaround to use lib/utils/interrupt_char.c
2018-07-31 14:28:34 +07:00
jepler
Hierophect
Dan Halbert
Dan Halbert
Scott Shawcroft
Radomir Dopieralski
Scott Shawcroft
sommersoft
Benny Meisels
Dave Astels
brentru
Chris Osterwood
jepler
wallarug
Keith Packard
sommersoft
hathach
Tavish Naruka
siddacious
Kattni Rembor
Carl Elkins
jandjstudios
iot49
Anthony DiGirolamo
shazz
Elvis Pfützenreuter
sabas1080
ladyada
ladyada
Carlos
ITACA Innovation S.R.L
Nick Moore
siddacious
Max Holliday
Damiano Mazzella
Melissa LeBlanc-Williams
Sabas
Justin R. Cutler
John Reese
caternuson
Jerry Needell
TG-Techie
Noralf Trønnes
Elias Santistevan
ShawnHymel
Lars Kellogg-Stedman
Roy Hooper
Gregory P. Smith
dsiee
TG-Techie
jimblom
Benjamin Shockley
ATMakersBill
arturo182
Josh Klar
Josh Klar
Paul Sajna
Jeff Epler
Enrico Paganin
Pierrick C
Paul Kierstead
Egor Leonenko
Scott Shawcroft