circuitpython

Author	SHA1	Message	Date
Scott Shawcroft	377503e61c	Merge pull request #3284 from dhalbert/fix-3171-evt-handler Remove event handler before setting it to NULL	2020-08-17 15:02:29 -07:00
Brent Rubell	b1a8fb83fa	Merge pull request #3251 from jerryneedell/jerryn_rfm9x RFM9x -- freeze library into build	2020-08-17 17:11:35 -04:00
Dan Halbert	6e5c2b3fe2	Merge pull request #3260 from rhooper/pixelbuf-iterable Make pixelbuf support iterables and floats	2020-08-17 11:56:31 -04:00
Dan Halbert	16ff7b167c	bdmicro_vina_m0: inline limit 60 -> 50 The ja translation was not fitting.	2020-08-17 10:05:25 -04:00
Dan Halbert	ef40f83f99	Remove event handler before setting it to NULL	2020-08-15 14:39:53 -04:00
Dan Halbert	cf0f3d70b5	SPIM3 buffer must be in first 64kB of RAM	2020-08-15 10:31:56 -04:00
Lucian Copeland	7078c63062	Add missing Neopixel pin definition	2020-08-14 16:58:24 -04:00
Lucian Copeland	0fc730bc5a	Expand PulseOut API, debug cleanup	2020-08-14 16:36:02 -04:00
Lucian Copeland	88fcc19e24	Add PulseIn	2020-08-14 15:30:48 -04:00
Lucian Copeland	f9512983ff	Add PulseOut	2020-08-14 12:21:41 -04:00
Dan Halbert	98469322b7	Merge pull request #3276 from xiongyihui/main support to change ble mac address	2020-08-14 11:14:36 -04:00
Yihui Xiong	52990a332d	fix	2020-08-14 17:48:15 +08:00
Dan Halbert	a28d0f6c80	Merge pull request #3273 from jepler/ja-firmware-size Squeeze firmwares to fit the new ja translation	2020-08-13 12:19:28 -04:00
Dan Halbert	329f4fb2e6	Update mpconfigboard.mk The stm boards default to `-O2`. Changing to `-Os` brings it back to ~43kB (!) free even for ja.	2020-08-13 10:09:46 -04:00
Jeff Epler	42b860e91a	stm: meowbit_v121: remove _pixelbuf to fit ja translation	2020-08-13 07:49:45 -05:00
Yihui Xiong	e7da652711	able to change ble mac address	2020-08-13 16:54:29 +08:00
Dan Halbert	44c9c43cd1	ble_uart_echo_test works	2020-08-13 00:03:39 -04:00
Jeff Epler	239c8ff87f	metro_m0_express: put back audiobusio this now fits locally (though it's very close to capacity); let's see what the CI says. ``` make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja ... 253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB). ```	2020-08-12 19:11:33 -05:00
Scott Shawcroft	7ffa2a103c	Merge pull request #3269 from jepler/sharpdisplay-v2 Sharp Memory Display displayio support (v2)	2020-08-12 16:53:09 -07:00
Jeff Epler	aa0b4f7045	cpx_display: Put back AUDIOBUSIO, take away ROTARYIO AUDIOBUSIO is needed for the on-board mic using PDMIn	2020-08-12 16:17:48 -05:00
Jeff Epler	ea8e9b8cef	metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO Dan notes that this is more frequently the solution we've chosen	2020-08-12 16:17:13 -05:00
Jeff Epler	299894025a	stringcar_m0_express: make ja translation fit	2020-08-12 13:47:10 -05:00
Jeff Epler	f08ee0db20	itsybitsy_m0_express: make ja translation fit again	2020-08-12 13:44:00 -05:00
Jeff Epler	7bd42244c9	snekboard: make ja translation fit	2020-08-12 13:34:36 -05:00
Jeff Epler	45f6bc1f3e	serpente: make ja translation fit	2020-08-12 13:32:08 -05:00
Jeff Epler	36bfbaae69	feather_radiofruit_zigbee: make ja translation fit	2020-08-12 13:28:30 -05:00
Jeff Epler	58a1361d3e	Merge remote-tracking branch 'origin/main' into ja-firmware-size	2020-08-12 13:26:12 -05:00
Jeff Epler	06f6cd067d	nrf: Improve commenting about disabled warnings	2020-08-12 12:59:48 -05:00
Jeff Epler	813dcd1b73	trinket_m0_haxpress: make ja translation fit	2020-08-12 12:44:17 -05:00
Jeff Epler	88f222f1a1	metro_m0_express: make ja translation fit	2020-08-12 12:38:17 -05:00
Jeff Epler	ba91023fff	itsybitsy_m0_express: make ja translation fit	2020-08-12 12:35:29 -05:00
Jeff Epler	6b9f7c9047	hallowing_m0_express: make ja translation fit	2020-08-12 12:29:30 -05:00
Jeff Epler	58afda342d	feather_m0_supersized: make ja translation fit	2020-08-12 11:53:34 -05:00
Jeff Epler	27c2eb1869	feather_m0_express: make ja translation fit	2020-08-12 11:51:56 -05:00
Jeff Epler	8865e4ca97	circuitplayground_express_displayio: make ja translation fit	2020-08-12 11:46:52 -05:00
Jeff Epler	f3748fe20d	circuitbrains_basic_m0: Use optimization flags to let ja translation fit	2020-08-12 11:46:31 -05:00
Jeff Epler	f9d1d9d114	atmel-samd: disable FRAMEBUFFERIO on samd21 .. this disables SHARPMEMORY as well.	2020-08-12 11:15:34 -05:00
Jeff Epler	454e616d13	atmel-samd: disable FRAMEBUFFERIO on samd21 .. this disables SHARPMEMORY as well.	2020-08-12 10:46:56 -05:00
Scott Shawcroft	3197c579e0	Merge pull request #3262 from tannewt/fix_fs_corruption Fix writing sector 0 as the first write.	2020-08-12 08:14:55 -07:00
Jeff Epler	32fc8b0676	nrf: reset_pin_number: reset pin clears never-reset, mirroring samd	2020-08-12 07:32:18 -05:00
Jeff Epler	760a171903	nrf: Make port build with -Werror=undef .. build-tested on particle_xenon	2020-08-12 07:32:18 -05:00
bleeptrack	49407b6c06	trailing spaces fix	2020-08-12 13:42:45 +02:00
bleeptrack	e34fac6645	Whitespace and Newline fix	2020-08-11 23:59:32 +02:00
Dan Halbert	06f3b4048a	fix #3228 for nrf; still needs to be fixed for HCI; tested	2020-08-11 16:21:16 -04:00
bleeptrack	228d9b5a12	Fixing indentation	2020-08-11 22:18:15 +02:00
bleeptrack	22ae1dbac8	Removing unnecessary pin ignored	2020-08-11 22:17:17 +02:00
bleeptrack	00676ff5a9	PicoPlanet	2020-08-11 21:49:52 +02:00
Scott Shawcroft	8488b31aa0	Init directly	2020-08-11 11:19:40 -07:00
Scott Shawcroft	bbac68e77c	Merge pull request #3232 from hierophect/esp32-neopixel ESP32-S2: Add Neopixel support	2020-08-11 11:04:39 -07:00
Scott Shawcroft	87c78be8f4	Fix writing sector 0 as the first write. This was the FS issue I saw when debugging wifi and only happens when the first write is to sector 0. It causes issues because it blanks all of sector 0 after the first block. Fixes #3133	2020-08-10 17:14:49 -07:00
Jeff Epler	807f049dc3	Merge pull request #3244 from xiongyihui/main add an option to turn off QSPI when sleep	2020-08-10 16:06:57 -05:00
Jeff Epler	1cf3762392	Merge remote-tracking branch 'origin/main' into stm32-sdioio	2020-08-10 12:54:12 -05:00
Lucian Copeland	d47bd5529c	Fix neopixel macro issue, set default neopixel color	2020-08-10 13:16:20 -04:00
Dan Halbert	0f4b969d62	discovery of Nordic UART service working	2020-08-08 00:29:37 -04:00
Jerry Needell	1d980d527e	Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x	2020-08-07 12:48:41 -04:00
Yihui Xiong	af1291ec28	dynamically enable or disable QSPI by default	2020-08-07 16:23:42 +08:00
Jerry Needell	f7961b96a9	update comment	2020-08-06 10:05:18 -04:00
Jerry Needell	c42ffb8f3d	remove usb_hid	2020-08-06 05:44:26 -04:00
Yihui Xiong	d8257380d7	add qspi_disable()	2020-08-06 09:56:05 +08:00
Lucian Copeland	78d049d0f1	Fix pwm reset spew, protect against null reference in led status	2020-08-05 14:05:53 -04:00
Jerry Needell	432f43a472	freeze rfm9x and BusDevice, remove many built-in modules	2020-08-05 11:37:57 -04:00
root	c7b6e66426	Fixes for pulsein tick handling	2020-08-05 10:03:20 -05:00
Yihui Xiong	7854625c4e	avoid using the RGB LEDs to save energy	2020-08-05 16:08:13 +08:00
Yihui Xiong	dbe47a6a2a	adjust	2020-08-05 16:07:18 +08:00
Jeff Epler	93b373d617	"pop from empty %q" Saves 12 bytes code on trinket m0	2020-08-04 18:42:09 -05:00
Lucian Copeland	14b3b51c58	Rework build flags, prevent idf errors	2020-08-04 18:40:24 -04:00
Dan Halbert	ac95106b88	service discovery works; need to work on char and descriptor discovery	2020-08-04 18:24:37 -04:00
Jeff Epler	c849b781c0	Combine 'index out of range' messages	2020-08-04 14:45:45 -05:00
Jeff Epler	89797fd3f9	various: Use mp_obj_get_type_qstr more widely This removes runtime allocations of the cstring version of the qstring. It is not a size improvement	2020-08-04 14:45:45 -05:00
Jeff Epler	dddd25a776	Combine similar strings to reduce size of translations This is a slight trade-off with code size, in places where a "_varg" mp_raise variant is now used. The net savings on trinket_m0 is just 32 bytes. It also means that the translation will include the original English text, and cannot be translated. These are usually names of Python types such as int, set, or dict or special values such as "inf" or "Nan".	2020-08-04 13:34:29 -05:00
Yihui Xiong	6dc0f4f1b6	add an option to turn off QSPI when sleep	2020-08-05 01:10:58 +08:00
Jeff Epler	0e2d231445	Merge remote-tracking branch 'origin/main' into stm32-sdioio	2020-08-03 21:01:53 -05:00
Dan Halbert	a995a5c58f	wip: partial discovery responses; compiles; not tested	2020-08-03 21:02:57 -04:00
DavePutz	d7eedc5e38	Merge pull request #20 from adafruit/main Update from main	2020-08-03 13:14:01 -05:00
root	9203a77804	Turn off interrupts while in handler	2020-08-03 11:31:12 -05:00
Lucian Copeland	4900668778	Merge remote-tracking branch 'upstream/main' into esp32-neopixel	2020-08-03 12:26:37 -04:00
sabas1080	0e30fe1cc5	Update VID & PID codes	2020-08-02 19:54:11 -05:00
Dan Halbert	0a60aee3e4	wip: compiles	2020-08-02 11:36:38 -04:00
sabas1080	b074f8a161	update for build test	2020-08-02 00:42:36 -05:00
sabas1080	fea1cad02c	add support for Bast Wifi Electronic Cats	2020-08-01 17:51:45 -05:00
root	12b81618a3	Changes for getting supervisor ticks	2020-08-01 13:27:02 -05:00
Dan Halbert	1771858f4a	add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes	2020-08-01 13:20:46 -04:00
Dan Halbert	4b71831d8b	SUPEROPT_VM = 0 for de_DE	2020-08-01 12:36:20 -04:00
Lucian Copeland	94b2561860	Fix include error	2020-08-01 09:22:18 -04:00
Lucian Copeland	1c1df053d5	Add neopixel support	2020-07-31 15:34:12 -04:00
Jeff Epler	27c6ffb9a2	atmel-samd: gemma, trinket: Make space for de_DE translation	2020-07-30 11:29:47 -05:00
Jeff Epler	d69f081c04	Merge remote-tracking branch 'origin/main' into blm_badge	2020-07-30 07:24:48 -05:00
Jeff Epler	531c1e046c	Merge pull request #3226 from joeycastillo/main Small updates to Open Book board	2020-07-30 07:21:50 -05:00
Jeff Epler	f175a49444	stm: sdioio: include header for common_hal_mcu_pin_claim	2020-07-30 07:18:12 -05:00
Jeff Epler	b57e6e9856	stm: sdioio: call common_hal_mcu_pin_claim	2020-07-30 07:18:12 -05:00
Jeff Epler	d73505a027	stm: fix if-guard of conditional code	2020-07-30 07:18:12 -05:00
Jeff Epler	60dd5a8d7d	stm: sdioio: remove unused code related to "SD Card detect pin" .. this probably came from the examples that I studied at the beginning of implementation. The card detection feature is unused. As a "detect pin" is not sent from the shared-bindings, there is no way to get the correct pin anyway. Instead, if code needs to detect the insertion state it can directly use the pin as GPIO in Python code.	2020-07-30 07:18:02 -05:00
Jeff Epler	ccd3013396	stm: stioio: correctly claim pins	2020-07-30 07:18:02 -05:00
Jeff Epler	3cf1258c87	stm: sdioio: Get rid of debug code and useless comments	2020-07-30 07:18:02 -05:00
Jeff Epler	6a99a7b551	stm: Use 'Invalid %q pin selection' more places	2020-07-30 07:18:02 -05:00
Jeff Epler	92d2f47503	feather_stm32f405_express: sdio_data_tuple should be static	2020-07-30 07:18:02 -05:00
Jeff Epler	4adbd23b75	stm: Add sdioio support for feather_stm32f405_express Currently, only the bus specs of the stm32f405xx have been coded. Other stm-family chips need (at a minimum) the specs added in their periph.[ch] files.	2020-07-30 07:18:02 -05:00
Jeff Epler	d30f11163c	stm: enable SD module in HAL	2020-07-30 07:18:02 -05:00
Jeff Epler	af135a7560	atmel-samd: move samd-specific script	2020-07-30 07:18:02 -05:00
Joey Castillo	8acec2ca35	add descriptive pin names	2020-07-29 13:49:08 -04:00
Joey Castillo	ea9bc9b4b6	set screen orientation to portrait	2020-07-29 13:46:10 -04:00
hathach	b2ec77e554	Merge remote-tracking branch 'adafruit/main' into improve-highspeed-usb	2020-07-29 23:14:52 +07:00
hathach	b6724e843c	update CDC/MIDI bufsize to at least 512 for highspeed port	2020-07-29 16:22:27 +07:00
hathach	6063828279	replace USB_MSC_MAX_PACKET_SIZE with USB_HIGHSPEED in descriptor gen tool	2020-07-29 15:38:55 +07:00
Dan Halbert	ca9eae8eea	Merge pull request #3209 from pewpew-game/fluff-m0-pins fluff_m0: add pin aliases	2020-07-28 15:15:15 -04:00
Dan Halbert	824a57c6f4	Merge pull request #3218 from tannewt/use_gcc10_peripherals Use samd peripherals fixed for gcc 10	2020-07-28 15:14:20 -04:00
Scott Shawcroft	b30d89131b	Merge pull request #3215 from ansonhe97/main Added display QSTR to Wio Terminal	2020-07-28 11:53:17 -07:00
Dan Halbert	aa97ea2501	Merge remote-tracking branch 'adafruit/main' into blm_badge	2020-07-28 14:15:02 -04:00
Scott Shawcroft	92216d6417	Use samd peripherals fixed for gcc 10	2020-07-28 11:14:25 -07:00
Dan Halbert	e5e132a364	add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT	2020-07-28 11:49:54 -04:00
ansonhe97	e15bcebb6e	Added display QSTR to Wio Terminal	2020-07-28 17:31:17 +08:00
sabas1080	d37326326d	init bastwifi	2020-07-28 00:56:37 -05:00
Jerry Needell	945736e9bb	add adjustments for crickit and displayio variants of CPX	2020-07-27 22:13:04 -04:00
Jerry Needell	2bdd62220e	adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice	2020-07-27 21:50:36 -04:00
Scott Shawcroft	debbf1028a	Merge pull request #3196 from IkigaiSense/ikigaisense_vita add-ikigaisense_vita-nRF52840	2020-07-27 16:10:57 -07:00
Scott Shawcroft	f4f2018952	Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2 ndgGarage ndbit6 v2	2020-07-27 15:51:23 -07:00
Scott Shawcroft	7be9837f73	Merge pull request #3193 from ciscorn/type-annotations More type hints	2020-07-27 14:26:54 -07:00
Taku Fukada	d356581651	Fix several type hints	2020-07-27 18:05:13 +09:00
Radomir Dopieralski	b2c4b0bcfa	fluff_m0: don't exclude portb pins explicitly	2020-07-26 17:26:32 +02:00
Radomir Dopieralski	b1b253c012	fluff_m0: add pin aliases Add aliases for SDI, SDO and EN, so that pin names match the text on the PCB to avoid confusion. Also disable all pins from port B, because that package of SAMD21 doesn't have port B.	2020-07-26 13:39:42 +02:00
Dan Halbert	7ab5c520e6	Merge pull request #3190 from DavePutz/opt-test Changes to allow different compiler optimizations per board	2020-07-25 17:03:10 -04:00
Dan Halbert	b7e6bf959e	Merge pull request #3205 from burtyb/commander-2 Add GamePad to Commander board	2020-07-25 16:57:58 -04:00
Chris Burton	c4a5297ee2	Add GamePad to Commander	2020-07-25 17:53:27 +00:00
ikigaisense	6696915801	fix-ndbit6-for-ndbit6_v2	2020-07-25 10:07:33 -06:00
root	c4817968ee	Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test	2020-07-24 23:28:41 -05:00
DavePutz	3dfed3c4aa	Merge pull request #15 from adafruit/main update from main	2020-07-24 20:29:53 -05:00
root	739981b34e	update for pewpew	2020-07-24 17:27:25 -05:00
DavePutz	a14101cd13	Use current mpconfigboard.mk with optimization change	2020-07-24 14:09:09 -05:00
Lucian Copeland	356b1a8d6d	Finish common-hal pin API	2020-07-24 12:29:18 -04:00
hierophect	c735dceed5	Merge pull request #3099 from hierophect/stm32-timer-allocator STM32: Add timer allocator, PulseIO adjustments	2020-07-24 11:16:39 -04:00
root	b9cdf195e2	board mk file changes	2020-07-24 10:00:42 -05:00
root	204cdada7c	remove unnecessary mk files parameters	2020-07-24 09:53:40 -05:00
Taku Fukada	54a342a7f5	Add and correct some type hints	2020-07-24 18:20:03 +09:00
root	ce37a442e8	format fix	2020-07-23 19:35:04 -05:00
root	c937fa1760	fix formatting	2020-07-23 19:29:57 -05:00
root	778e8bfda9	Changes to optimization option	2020-07-23 19:27:02 -05:00
ikigaisense	703fb9d4a1	update-ndGarage_ndbit6_v2	2020-07-23 16:08:30 -06:00
Scott Shawcroft	060ab8a1f0	Merge pull request #3194 from tannewt/gcc10 Prep for GCC10	2020-07-23 14:39:21 -07:00
ikigaisense	1ee8a09da2	add-ikigaisense_vita-nRF52840	2020-07-23 14:39:59 -06:00
Scott Shawcroft	6a46fd5b91	Merge pull request #3185 from hierophect/esp32-pulseio ESP32-S2: PWMOut	2020-07-23 13:11:33 -07:00
Lucian Copeland	cf0a4d208e	Fix unintended timer reset, style changes	2020-07-23 14:01:10 -04:00
Scott Shawcroft	2bd6d05663	Add externs. GCC10 complains about duplicate defines	2020-07-22 16:26:46 -07:00
Lucian Copeland	61a2e4f94b	Add PWMOut	2020-07-22 16:34:18 -04:00
Lucian Copeland	c1f731d62e	Claim USB pins at startup to prevent overwrites	2020-07-22 14:22:05 -04:00
hierophect	e232ec10ce	Merge branch 'main' into stm32-timer-allocator	2020-07-22 13:59:39 -04:00
Lucian Copeland	138189bad1	Free timers when modules de-init	2020-07-22 13:58:57 -04:00
root	d83a4ac72d	Changes to add compiler optimization option	2020-07-22 12:44:41 -05:00
DavePutz	39e01c3938	Merge pull request #14 from adafruit/main update from main	2020-07-22 11:30:49 -05:00
Scott Shawcroft	8ff2846bb2	Disable countio on circuitbrains basic	2020-07-21 16:21:49 -07:00
root	db5c3c9676	dded optimization for esp32s2	2020-07-21 17:54:47 -05:00
Scott Shawcroft	cb7df2e1ed	Merge pull request #3160 from tannewt/enable_pystack Enable PYSTACK to keep function state out of the heap	2020-07-21 13:38:52 -07:00
Scott Shawcroft	5e3a853db4	Turn off GC opt on uchip board	2020-07-21 12:51:59 -07:00
Scott Shawcroft	678faff464	Be more aggressive with uChip build	2020-07-21 11:02:23 -07:00
root	49decf90c9	Add option for higher optimization levels	2020-07-21 10:11:08 -05:00
Scott Shawcroft	0c6935e336	Merge branch 'main' into disable_network	2020-07-20 16:28:22 -07:00
Scott Shawcroft	12edb57aac	Merge pull request #3166 from theacodes/bhb-adc Add _bhb user module for Big Honking Button	2020-07-20 16:24:36 -07:00
Thea Flowers	7ba89f5330	Add _bhb user module for Big Honking Button BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.	2020-07-18 22:45:08 -07:00
Radomir Dopieralski	11ef43b071	pewpew_m4: Disable USB_HID back German translation fails to build, so I have to disabled USB_HID after all.	2020-07-18 20:09:30 +02:00
Radomir Dopieralski	8d692f33a8	pewpew_m4: Enable analogio and usb_hid The newest version for the Stage library for PewPewM4 no longer contains embedded graphics, which frees enough space in flash to enabled back AnalogIO and also add USB_HID. There is still ~192 bytes left free. If new additions to CircuitPython make it grow further, we can disable USB_HID again.	2020-07-18 19:30:40 +02:00
Scott Shawcroft	610e0171aa	Disable existing native networking. We're moving towards a co-processor model and a Wiznet library is already available. New native APIs will replace these for chips with networking like the ESP32S2 but they won't be these.	2020-07-17 17:43:02 -07:00
Lucian Copeland	207369ec09	Add boilerplate, create basic PWMOut test	2020-07-17 17:28:23 -04:00
Jeff Epler	9cdf5e148a	Merge pull request #2879 from jepler/background-callback Use a linked list of background tasks to perform	2020-07-17 15:46:03 -05:00
Jeff Epler	6912d31560	uchip: reclaim some flash space	2020-07-17 14:32:05 -05:00
Dan Halbert	6494bbdc64	snapshot	2020-07-16 23:14:49 -04:00
Lucian Copeland	dc6902a33e	Exclude timers from H7 builds	2020-07-16 17:11:24 -04:00
Lucian Copeland	6a49766df0	Fix pulseIO reset and frequency issues, remove IRQ conflict	2020-07-16 15:45:18 -04:00
Scott Shawcroft	72f6d7ee21	Merge pull request #3155 from jepler/esp32s2-parallel-build esp32s2: Take care to invoke the sub-build-system only once	2020-07-16 11:26:53 -07:00
Scott Shawcroft	7bb508bf43	Merge pull request #3157 from tinkeringtech/tinkeringtech-scoutmakes-azul Addition of Tinkeringtech ScoutMakes Azul nRF52840 based platform to CircuitPython	2020-07-16 11:03:31 -07:00
TinkeringTech	49fcfd14d2	Added the TinkeringTech ScoutMakes Azul platform to CircuitPython	2020-07-15 21:49:34 -04:00
Jeff Epler	1df48176ce	supervisor: factor supervisor_background_tasks from sundry ports	2020-07-15 11:49:44 -05:00
Jeff Epler	6160d11c5a	supervisor: factor out, Handle USB via background callback	2020-07-15 11:49:44 -05:00
Jeff Epler	a2919a6fb2	esp32s2: Use the device's EUI-48 address as unique ID On my hardware, esptool reports MAC: 7c:df:a1:02:6c:b8 after this change, the USB descriptor says SerialNumber: 7CDFA1026CB8 and microcontroller.cpu.id has >>> "".join("%02x" % byte for byte in microcontroller.cpu.uid) 'c7fd1a20c68b' Note that the nibble-swapping between USB and cpu.uid is typical. For instance, an stm32 board has USB SerialNumber 24002500F005D42445632302 but hex-converted microcontroller.cpu.id 420052000f504d4254363220.	2020-07-15 11:45:13 -05:00
Jeff Epler	910f69c42b	esp32s2: Take care to invoke the sub-build-system only once This allows "make -j" in the outer build system to function properly, with a potentially large decrease in build times on high end desktop systems.	2020-07-15 10:30:07 -05:00
Jeff Epler	742aa740f6	samd: audio: Move to background callback Testing performed: Played half of the Bartlebeats album :) :)	2020-07-15 09:26:47 -05:00
Jeff Epler	dc74ae83da	nRF: Always use sd_nvic_critical_region calls The motivation for doing this is so that we can allow common_hal_mcu_disable_interrupts in IRQ context, something that works on other ports, but not on nRF with SD enabled. This is because when SD is enabled, calling sd_softdevice_is_enabled in the context of an interrupt with priority 2 or 3 causes a HardFault. We have chosen to give the USB interrupt priority 2 on nRF, the highest priority that is compatible with SD. Since at least SoftDevice s130 v2.0.1, sd_nvic_critical_region_enter/exit have been implemented as inline functions and are safe to call even if softdevice is not enabled. Reference kindly provided by danh: https://devzone.nordicsemi.com/f/nordic-q-a/29553/sd_nvic_critical_region_enter-exit-missing-in-s130-v2 Switching to these as the default/only way to enable/disable interrupts simplifies things, and fixes several problems and potential problems: * Interrupts at priority 2 or 3 could not call common_hal_mcu_disable_interrupts because the call to sd_softdevice_is_enabled would HardFault * Hypothetically, the state of sd_softdevice_is_enabled could change from the disable to the enable call, meaning the calls would not match (__disable_irq() could be balanced with sd_nvic_critical_region_exit). This also fixes a problem I believe would exist if disable() were called twice when SD is enabled. There is a single "is_nested_critical_region" flag, and the second call would set it to 1. Both of the enable() calls that followed would call critical_region_exit(1), and interrupts would not properly be reenabled. In the new version of the code, we use our own nesting_count value to track the intended state, so now nested disable()s only call critical_region_enter() once, only updating is_nested_critical_region once; and only the second enable() call will call critical_region_exit, with the right value of i_n_c_r. Finally, in port_sleep_until_interrupt, if !sd_enabled, we really do need to __disable_irq, rather than using the common_hal_mcu routines; the reason why is documented in a comment.	2020-07-15 09:26:47 -05:00
Lucian Copeland	818b96ae61	Fix IRQ enum protections	2020-07-14 16:33:36 -04:00
Scott Shawcroft	90ad9beff5	Merge pull request #3136 from xiongyihui/master Add 2 boards nRF52840 M.2 devkit and M60 Keyboard	2020-07-13 17:14:18 -07:00
Scott Shawcroft	51c888d4be	Merge pull request #3003 from Flameeyes/master License tagging according to REUSE specifications.	2020-07-13 16:28:49 -07:00
Scott Shawcroft	d712d1281c	Merge branch 'main' into master	2020-07-13 15:53:44 -07:00
Dan Halbert	3fcd999130	Merge pull request #3130 from pewpew-game/brownout-level SAMD: make the brownout detection level configurable per board	2020-07-13 16:26:11 -04:00
Lucian Copeland	b8910676db	Add missing enum preprocessor protection	2020-07-13 11:52:30 -04:00
Dan Halbert	f6869c69c5	wip: advertising; not tested	2020-07-12 19:45:23 -04:00
Yihui Xiong	c8752ff93e	use RGB LEDs as status indicators	2020-07-11 21:25:32 +08:00
Yihui Xiong	8e26fdc0e9	add LED status, remove unused macros	2020-07-11 10:51:31 +08:00
Radomir Dopieralski	742f9cfdb0	Fluff M0: additional pins on version 1.3 of the board	2020-07-10 20:40:58 +02:00
Yihui Xiong	7ff499046b	use VID & PIDs granted by Seeed	2020-07-11 00:37:45 +08:00
Lucian Copeland	eb86010176	Enable RGB Matrix	2020-07-10 11:06:12 -04:00
Scott Shawcroft	0068c76fa6	Merge pull request #3135 from arms22/bless_dev_board_multi_sensor Add new board BLE-SS dev board Multi Sensor	2020-07-09 10:29:57 -07:00
Lucian Copeland	edc48a505f	Complete F405 pin and periph definitions	2020-07-09 13:10:18 -04:00
Lucian Copeland	2bcc5c06c2	Fix advanced claimed pin/package timer search	2020-07-09 11:42:37 -04:00
Yihui Xiong	678f266394	fix pre-commit check	2020-07-09 10:25:46 +00:00
Radomir Dopieralski	e0733d153e	SAMD: configurable brownout, separate the variables	2020-07-09 12:17:07 +02:00
Yihui Xiong	96f6ce222c	add makerdiary m60 keyboard Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>	2020-07-09 10:02:27 +00:00
Yihui Xiong	e81d22cd67	add makerdiary nrf52840 m.2 devkit Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>	2020-07-09 10:01:04 +00:00
arms22	bb5cdcf954	Add new board BLE-SS dev board Multi Sensor	2020-07-09 11:26:45 +09:00
Lucian Copeland	9c38f5dcb1	Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator	2020-07-08 16:03:12 -04:00
Scott Shawcroft	ce214e82a5	Merge pull request #3127 from Arudinne/Raytac_MDBT50Q-DB-40 Add new board Raytac MDBT50Q-DB-40	2020-07-08 11:34:56 -07:00
Radomir Dopieralski	83a27edd20	SAMD: make the brownout detection level configurable per board Not all boards have external flash or other components that make them require 2.7V -- sometimes we can get considerably longer battery life by decreasing this requirement. In particular, pewpew10 and pewpew_m4 are powered directly from battery, with no LDO, and should work fine down to 1.6V.	2020-07-08 19:59:53 +02:00
Arudinne	768149fb01	modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c	2020-07-08 10:36:41 -05:00
Arudinne	5a9aac472a	modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c	2020-07-07 14:37:59 -05:00
Jeff Epler	57ab4f1329	stm: SPI: revamp pin search code I discussed with Hierophect on Discord about how to "de-nest" the code for configuring SPI objects on STM, because the problems with one nesting level per pin becomes unmanageable with the up to 10 pins of SDIO. This code (which is only compile-tested so far) demonstrates the concept we discussed. The SCK pin is always required. Loop over all possibilities of the SCK pin. When we are considering a particular item in the mcu_spi_sck_list we have now become committed to using a particular periph_index. If all the other pins can be satisfied by that periph_index, then we have a working combination. Once we have a working combination that is not reserved, we can return that combination. On reaching the end, we have checked all the possible possibilities and can give the same errors as before: One if there was a possibility that worked but was reserved; and another if no possibility worked.	2020-07-07 14:37:50 -05:00
Arudinne	dc2f729d19	modified: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.mk modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c	2020-07-07 14:37:08 -05:00
Arudinne	b5af05cd31	new file: ports/nrf/boards/raytac_mdbt50q-db-40/board.c new file: ports/nrf/boards/raytac_mdbt50q-db-40/bootloader/6.0.0/pca10056_bootloader_6.0.0_s140.zip new file: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.h new file: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.mk new file: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c	2020-07-07 12:27:23 -05:00
Scott Shawcroft	965a4961ce	Merge pull request #3120 from DavePutz/issue#3049 Issue#3049 -PulseIn not working in CP5.4	2020-07-07 08:59:22 -07:00
DavePutz	0932b64ae7	Correct for SAMD51 build	2020-07-06 23:25:33 -05:00
DavePutz	1b3cb17abd	Corrected file for SAMD51 build	2020-07-06 21:47:11 -05:00
DavePutz	ab4a453006	Made requested changes	2020-07-06 21:40:38 -05:00
Scott Shawcroft	a7844205bd	Merge pull request #3123 from kamtom480/sdk2.0 spresense: update SDK to 2.0.1	2020-07-06 15:09:46 -07:00
Scott Shawcroft	846f01b2c8	Merge pull request #3113 from ansonhe97/main ADD: Added Wio Terminal's functional pins and LCD driver to board init	2020-07-06 14:50:47 -07:00
Diego Elio Pettenò	34b4993d63	Add license to some obvious files.	2020-07-06 19:16:25 +01:00
Radomir Dopieralski	2f80460a2f	Fluff M0: additional pins on version 1.3 of the board	2020-07-06 19:15:41 +01:00
Kamil Tomaszewski	97355f8fb7	spresense: update SDK to 2.0.1	2020-07-06 17:13:28 +02:00
DavePutz	ac33c3fe2c	Implementation of continuous synchronization of RTC during pulsein Flags and code to implement continuous synchronization of RTC during pulsein	2020-07-04 21:17:19 -05:00
DavePutz	94d90742dd	Implementation of RTC continuous synchronization during pulsein Flags and code to implement RTC continuous synchronization during pulsein	2020-07-04 21:15:38 -05:00
ndgarage	e514782cc6	update-with-new-usb-PID	2020-07-04 10:39:21 -06:00
ansonhe97	36ef3476de	Fix depreciate terminology	2020-07-04 11:21:58 +08:00
Lucian Copeland	c72e3536f1	Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator	2020-07-03 09:50:05 -04:00
ansonhe97	2ecb46f192	Fix CI	2020-07-03 13:42:27 +08:00
ansonhe97	2a92cf8d8b	ADD: Added LCD driver to board init	2020-07-03 12:44:20 +08:00
ansonhe97	49aacc8596	ADD: Fixed wrong SPI pins and added more functional pins	2020-07-03 12:43:21 +08:00
Scott Shawcroft	4d7b9cde33	Merge pull request #3109 from pewpew-game/fluff_m0 Fluff M0: additional pins on version 1.3 of the board	2020-07-02 15:43:32 -07:00
Radomir Dopieralski	fce35c3481	Fluff M0: additional pins on version 1.3 of the board	2020-07-02 22:57:58 +02:00
Scott Shawcroft	4a21426377	Merge pull request #3103 from hierophect/stm32-simplex-spi-fix STM32: add debug flags, fix hang in simplex SPI	2020-07-02 13:42:08 -07:00
Lucian Copeland	4b66483757	Update submodule, revert direction change	2020-07-02 15:38:37 -04:00
Kamil Tomaszewski	f4a2474447	spresense: Add support for sdioio	2020-07-02 15:26:59 +02:00
Jeff Epler	fcddfd0f39	Merge pull request #3083 from tannewt/esp32s2_busio Add busio support for the ESP32-S2	2020-07-01 21:02:08 -05:00
Lucian Copeland	87d58b3b0a	STM32: add debug flags, fix hang in simplex SPI	2020-07-01 17:48:10 -04:00
Scott Shawcroft	367d3800fc	Return false if we already have the lock	2020-07-01 14:35:25 -07:00
ndgarage	0537f4e775	restore-ndgarage_ndbit6-to-original	2020-07-01 14:12:52 -06:00
ndgarage	c759c9a2aa	add-ndgarage_ndbit6_v2-update	2020-07-01 13:58:07 -06:00
svgops	b80dbb4b2c	add-ndgarage_ndbit6_v2	2020-07-01 12:06:59 -06:00
Lucian Copeland	ab9a64eafa	Add timer allocator, adjust pulsio to use general purpose timers	2020-07-01 10:35:49 -04:00
Jeff Epler	3a17a79bf2	Merge pull request #3094 from kamtom480/mkspk spresense: add elf32.h for mkspk	2020-07-01 06:58:40 -05:00
ansonhe97	d4e28dd233	ADD: added more special pins on Wio Terminal	2020-07-01 17:06:26 +08:00
Dan Halbert	11cb3e3b4b	hci skeleton done; not working yet	2020-06-30 23:19:40 -04:00
Scott Shawcroft	5028804878	Remove fixed pointers and check UART return	2020-06-30 15:29:42 -07:00
Scott Shawcroft	74ad5e80ce	Merge pull request #3089 from ansonhe97/main Add: added Seeed's Wio Terminal Board Support	2020-06-30 10:58:24 -07:00
Scott Shawcroft	69b3d47564	Fix other esp builds	2020-06-29 18:21:53 -07:00
Scott Shawcroft	965a40b6a1	Fix cxd56 function signature	2020-06-29 17:17:46 -07:00
Scott Shawcroft	111f7ddf69	Merge pull request #2863 from jepler/sdcard-in-core Sdcard in core	2020-06-29 16:49:58 -07:00
ansonhe97	4613f80d7a	Fix end of line	2020-06-29 17:41:48 +08:00
ansonhe97	0dd17f4418	Add: Added Seeed Wio Terminal board support	2020-06-29 16:22:41 +08:00
jerryneedell	bbedd43273	change CMake verision requirement	2020-06-27 13:27:42 -04:00
Scott Shawcroft	7f6bef3251	Remove debug prints	2020-06-26 16:56:17 -07:00
Scott Shawcroft	08749630a2	Fix SPI RX and remove debug prints	2020-06-26 16:30:24 -07:00
Scott Shawcroft	2d579cc995	Use NULL for deinited DigitalInOut This fixes a Display issue where no backlight pin is given but it's still deinitialized.	2020-06-26 12:33:50 -07:00
Scott Shawcroft	a9f257bcd6	Store host_id so that never reset works	2020-06-26 12:32:56 -07:00
Jeff Epler	c5db97c50f	atmel-sam: sdio: disable debug prints by default	2020-06-26 13:16:16 -05:00
Scott Shawcroft	0f074fb956	Merge pull request #3072 from PTS93/patch-2 Update minimum required cmake to 3.16	2020-06-26 10:02:24 -07:00
Jeff Epler	f496c0b58d	atmel-samd: Add SDIO SD card interface	2020-06-26 11:50:42 -05:00
Jeff Epler	d4b9458512	samd: sdio: Add needed files from atmel start	2020-06-26 11:50:41 -05:00
Jeff Epler	57fde2e07b	sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.	2020-06-26 11:50:23 -05:00
Scott Shawcroft	9ec9644928	Merge pull request #3071 from jgillick/jeremy/stm-nvm-flash STM32 (ThunderPack) - Move NVM sector to increase program size.	2020-06-26 09:45:26 -07:00
Dan Halbert	3e616ccead	update submodules	2020-06-26 12:21:57 -04:00
jgillick	017c188ab5	Move NVM block to increase program size.	2020-06-25 21:46:15 -07:00
Dan Halbert	759929c24a	hci early wip; refactor supervisor bluetooth.c for nrf: tested	2020-06-25 20:57:17 -04:00
Timon	a80d7479d0	Update minimum required cmake to 3.16 Earliest tested version that compiles. Failed with version 3.10	2020-06-26 02:04:14 +02:00
Timon	0a41b86f6b	Fix typo inserting IDF_PATH variable	2020-06-26 01:36:03 +02:00
Lucian Copeland	6c91af7d56	WIP	2020-06-25 17:27:01 -04:00
Jeff Epler	103ad9966a	remove machine_i2c, machine_spi This micropython code is not used in circuitpython	2020-06-25 11:44:21 -05:00
Jeff Epler	1d2cc0b968	I2CPeripheral: Rename class and its module This is an incompatible change.	2020-06-25 11:44:19 -05:00
Jeff Epler	07eb7d653c	Merge pull request #3042 from kamtom480/gnss Add gnss module	2020-06-25 11:08:40 -05:00
Jeff Epler	076a96ccc6	Merge pull request #3046 from jepler/same51 Add basic SAM E54 support and SAM E54 Xplained board	2020-06-25 06:55:27 -05:00
Kamil Tomaszewski	436b15e558	spresense: add elf32.h for mkspk	2020-06-25 10:26:33 +02:00
Scott Shawcroft	d768d4d37a	Merge branch 'main' into gnss	2020-06-24 17:17:43 -07:00
Scott Shawcroft	03e5043af4	Turn off Idle WDT and speed up CPU	2020-06-24 13:10:31 -07:00
Scott Shawcroft	ed6e81d688	Switch SPI to polling DMA and enable displayio	2020-06-24 13:10:08 -07:00
Scott Shawcroft	496e16d99b	Handle memory (hopefully). Short TX works	2020-06-24 12:47:59 -07:00
Scott Shawcroft	c5fa9730a8	Compiles!	2020-06-24 12:47:59 -07:00
Scott Shawcroft	fc9c0ba573	Initial SPI implementation. Almost certainly doesn't compile	2020-06-24 12:47:59 -07:00
Scott Shawcroft	f52f60b17d	Add UF2 build target	2020-06-24 12:47:59 -07:00
Scott Shawcroft	7b56617f8e	Turn off stub so flash works over native usb	2020-06-24 12:47:58 -07:00
Scott Shawcroft	a26102607e	Add UART support	2020-06-24 12:47:58 -07:00
Scott Shawcroft	6f050d7af3	Add pull up testing, proper us delay and stop supporting 45 and 46 for I2C	2020-06-24 12:47:58 -07:00
Scott Shawcroft	ae52d052cb	Fix I2C thanks to Mark!	2020-06-24 12:47:58 -07:00
Scott Shawcroft	d0401f02a9	Add initial I2C support, not quite working fully though	2020-06-24 12:47:58 -07:00
Jeff Epler	87835c77e8	Merge pull request #3038 from jepler/compute-usb-devices Compute USB_DEVICES instead of requiring it to be specified	2020-06-24 13:31:56 -05:00
Kamil Tomaszewski	ab4c09cea7	gnss: Add timestamp	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	3509dad5b3	gnss: Remove start and stop	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	343f093ead	spresense: Add support for GNSS	2020-06-24 11:14:44 +02:00
Jeff Epler	f232aef786	supervisor.mk: Compute USB_DEVICES; remove from boards and ports Since Actions passed on the previous commit, where this computed value was checked against the specified value (if any), this is no net change, except that we no longer need to specify it for particular boards or ports.	2020-06-23 12:59:01 -05:00
Scott Shawcroft	f67b307371	Merge pull request #3045 from k0d/stm32_alignment_issue Fixes issue with memory alignment in STM32	2020-06-23 10:54:08 -07:00
Jeff Epler	93d3629da2	stm: Sort configuration options and make them all conditional This makes them all overridable on the board level, tersely	2020-06-23 11:02:38 -05:00
Jeff Epler	0110463811	stm: Disable USB MIDI and most USB HID .. it was not in the USB descriptors anyway (lack of enough endpoints?)	2020-06-23 11:01:36 -05:00
Jeff Epler	3f112d28e3	mimxrt10xx: Disable USB MIDI .. it was not in the USB descriptors anyway (lack of enough endpoints?)	2020-06-23 10:57:32 -05:00
Jeff Epler	458eef052e	esp32s2: Disable USB MIDI .. it was not in the USB descriptors anyway (lack of enough endpoints?)	2020-06-23 10:57:25 -05:00
Jeff Epler	38659b566c	atmel-samd: Finish disabling USB MIDI and/or HID on certain boards	2020-06-23 10:56:27 -05:00
Jeff Epler	d5074220a8	atmel-samd: Add SAM E54 Xplained board Few peripherals are actually tested. However, USB, I2C and GPIO seem to work. Most pins are silkscreened with the "PX00" style, so the board module only includes the small number that are screened differently. The default SPI, I2C, and UART are the ones on the EXT2 header. This is arbitrary, but the I2C on this connector is shared with the on-board I2C devices and the PCC header, making it the most versatile.	2020-06-23 10:41:48 -05:00
Jeff Epler	da733c01da	atmel-samd: Add support for SAM E54 family MCUs This introduces the new macro SAM_D5X_E5X. This is mostly the same as SAMD51 before, except in a few places where a special case for SAME54 is required	2020-06-23 10:41:48 -05:00
Scott Shawcroft	0b99baccb8	Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board PID request for a new board configuration	2020-06-22 15:09:42 -07:00
Scott Shawcroft	54b66d9484	Merge pull request #3052 from dhalbert/samd51-voltage-check-delay delay 1ms on SAMD51 when reading processor voltage	2020-06-22 14:29:43 -07:00
Jeff Epler	d43449a6d6	sparkfun samd51 thing plus: Fix board.I2C() This had the SDA and SCL pins transposed, so nothing worked.	2020-06-22 10:45:27 -05:00
Jeff Epler	a770b5a919	never_reset_pin: Move pin validity check before first use of pin number	2020-06-22 10:45:27 -05:00
Jeff Epler	6638bc32c3	samd: Makefile: Regularize whitespace	2020-06-22 10:45:27 -05:00
Jeff Epler	8a760b0657	stm: Pin.c: Compute GPIO_PORT_COUNT instead of specifying manually	2020-06-22 10:45:27 -05:00
Jeff Epler	a580f0f1c4	_pew: move to common-hal I noticed that this code was referring to samd-specific functionality, and isn't enabled except in one samd board (pewpew10). Move it. There is incomplte support for _pew in mimxrt10xx which then caused build errors; adding a #if guard to check for _pew being enabled fixes it. The _pew module is not likely to be important on mimxrt but I'll leave the choice to remove it to someone else.	2020-06-22 10:45:27 -05:00
Jeff Epler	5a3a0a5092	stm: Makefile: sort files in SRC_STM32	2020-06-22 10:45:23 -05:00
Dan Halbert	1687c8b1e3	delay 1ms on SAMD51 when reading processor voltage	2020-06-19 15:25:04 -04:00
Florin Trutiu	b316549590	Added the new assigned VID/PID pair	2020-06-19 19:26:29 +03:00
Florin Trutiu	178be2e3c9	loc_ber_m4_base_board	2020-06-19 18:56:20 +03:00
Mark Olsson	23da0fa99c	Fixes issue with memory alignment in STM32 When compiling with optimizations on, an issue occurs where the claimed_pins/never_reset_pins memory location is shared with another variable. This causes some bad memory read, so the USB pins ended up being reset. Setting these to have an alignment of 4 bytes resolves this. Tested on nucleo_f746zg	2020-06-18 00:51:04 +02:00
Scott Shawcroft	a345223dac	Merge pull request #3031 from jepler/improve-shared-bindings-links docs: Improve 5.0.x <-> main branch doc linkrot	2020-06-16 11:49:27 -07:00
Lucian Copeland	fd4aafacbe	Add port D to LQFP64	2020-06-16 12:33:15 -04:00
Jeff Epler	9d5ccccf7d	cxd56: Disable HID and MIDI These are already disabled via the USB_DEVICES setting, but the code is included anyway.	2020-06-15 15:22:45 -05:00
Jeff Epler	a9614bb964	cxd56: Sort the configuration settings	2020-06-15 15:22:45 -05:00
Lucian Copeland	2aac3cbdce	Revert I2C timing overrides, reduce scope to module only	2020-06-15 13:51:09 -04:00
Jeff Epler	3c3cad5ae6	docs: Improve 5.0.x <-> main branch doc linkrot This improves, but does not entirely fix, the broken links that result from the autoapi change. It fixes module-level links, but class links still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x) is now just /shared-bindings/displayio/#displayio.Palette).	2020-06-14 11:12:35 -05:00
Scott Shawcroft	e27f68ffe7	Merge pull request #3025 from hierophect/stm32-f7-startup STM32: Add DTCM and ITCM support to F7 series	2020-06-11 11:03:48 -07:00
Lucian Copeland	724637faa3	Move I2C speed to clock-style definition	2020-06-11 11:17:51 -04:00
Lucian Copeland	c08702414e	Add macros for setting correct F7 and H7 I2C timing	2020-06-10 16:36:44 -04:00
Lucian Copeland	bf3a5afca1	Merge branch 'stm32-f7-startup' into stm32-i2cspeed	2020-06-10 16:16:15 -04:00
Lucian Copeland	c88a8e66c6	Minor comment fix	2020-06-10 13:22:21 -04:00
Lucian Copeland	7cc8b784c3	Add missing openmv definitions	2020-06-10 10:31:24 -04:00
Lucian Copeland	b414f82669	Add DTCM and ITCM support to F7 series	2020-06-09 18:01:52 -04:00
Scott Shawcroft	9b8d648986	Merge pull request #3020 from DavePutz/issue2958 Issue #2958 Correct calculation of subticks being returned from port_get_raw_ticks() for esp32s2	2020-06-09 12:41:18 -07:00
DavePutz	ec7a3feeba	Redid formula for calculating subticks changed subticks calculation to give a range from 0 to 32767.	2020-06-09 10:08:49 -05:00
Scott Shawcroft	0ba541d498	Merge pull request #3017 from Nicell/nice_nano Add nice!nano board support	2020-06-08 14:47:22 -07:00
DavePutz	d8bb2d7c6d	Correct ticks being returned from port_get_raw_ticks() Issue #2958 . Correct calculation of usec back to ticks in port_get_raw_ticks().	2020-06-08 10:52:27 -05:00
Scott Shawcroft	004d644184	Merge pull request #3009 from hierophect/stm32-LSE-startup-fix STM32: Rework LSE clock init, allow clock overrides	2020-06-07 22:37:53 -07:00
Nick	33496e9c68	Add nice!nano board support	2020-06-05 19:58:54 -05:00
Lucian Copeland	93cffaa87e	Fix pin macros typo, add extra flash protection	2020-06-05 16:43:08 -04:00
Lucian Copeland	ad0971fb25	Override HAL_Delay and HAL_GetTick	2020-06-05 13:56:32 -04:00
Scott Shawcroft	6400113bb9	Merge pull request #3001 from hierophect/mimxrt-teensy-boot mimxrt10xx: Disable pin_reset on 1060 boards	2020-06-05 10:28:53 -07:00
Lucian Copeland	a0977cac7b	Merge remote-tracking branch 'upstream/master' into stm32-LSE-startup-fix	2020-06-04 16:15:38 -04:00
Lucian Copeland	74effeeefd	Add temporary fix warning	2020-06-04 13:30:07 -04:00
Lucian Copeland	d14e34449b	Rework LSE clock init, allow clock overrides	2020-06-04 13:21:29 -04:00
Lucian Copeland	c93ccd1e91	Disable pin resets on the 1060	2020-06-03 12:07:08 -04:00
Diego Elio Pettenò	dd5d7c86d2	Fix up end of file and trailing whitespace. This can be enforced by pre-commit, but correct it separately to make it easier to review.	2020-06-03 10:56:35 +01:00
Lucian Copeland	b5b9a56918	Update teensy 4.0/4.1 pin protections	2020-06-02 18:05:59 -04:00
Scott Shawcroft	db04fd1725	Merge pull request #2933 from simmel-project/wdt-nrf Add Watchdog timer and add support for NRF watchdog	2020-06-02 10:33:24 -07:00
Sean Cross	ed8a52d1db	litex: remove call to `board_init()` These calls were all moved into `main.c`, however this call was not removed from litex. As a result, litex was calling `board_init()` twice. This is currently not a problem, as `fomu` is able to be initialized twice without issue, however future boards may have issue with this. This fixes #2991. Signed-off-by: Sean Cross <sean@xobs.io>	2020-06-02 10:19:40 +08:00
Scott Shawcroft	959f7297da	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-06-01 17:01:16 -07:00
Scott Shawcroft	4146d6f872	Merge pull request #2890 from jepler/nrf-audio-tick nrf: put supervisor enable/disable tick in place	2020-06-01 15:51:22 -07:00
Scott Shawcroft	dd2cd6f002	Merge pull request #2979 from hierophect/stm32-remove-crystals STM32: Set correct crystal settings on Discovery boards	2020-06-01 15:21:39 -07:00
Scott Shawcroft	323cca8910	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-06-01 15:18:12 -07:00
Lucian Copeland	75eb44f234	Note temporary issue with Nucleo boards	2020-06-01 12:26:08 -04:00
Kamil Tomaszewski	ce337eaa27	Fix port_get_raw_ticks	2020-06-01 11:35:46 +02:00
Dan Halbert	4667d4de8c	Merge pull request #2975 from dhalbert/aesio-nrf52840 enable aesio on all nRF52840 boards	2020-05-29 14:07:30 -04:00
Lucian Copeland	0fe7efdf36	Set correct crystal settings on Discovery boards	2020-05-29 14:01:34 -04:00
Scott Shawcroft	ddcae19254	Merge pull request #2964 from hierophect/mimxrt-busio-cleanup mimxrt10xx: Busio cleanup and bugfixes	2020-05-29 10:42:16 -07:00
Scott Shawcroft	2fd7a43f2f	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-05-29 10:16:24 -07:00
Lucian Copeland	fe75c7793c	Fix SWO/Analog overlap, style changes	2020-05-29 12:19:37 -04:00
Dan Halbert	0d2fee95e2	enable aesio on all nRF52840 boards	2020-05-29 11:06:30 -04:00
Scott Shawcroft	2fb4fa3289	Spill registers before scanning the stack. From the change: // xtensa has more registers than an instruction can address. The 16 that // can be addressed are called the "window". When a function is called or // returns the window rotates. This allows for more efficient function calls // because ram doesn't need to be used. It's only used if the window wraps // around onto itself. At that point values are "spilled" to empty spots in // the stack that were set aside. When the window rotates back around (on // function return), the values are restored into the register from ram. // So, in order to read the values in the stack scan we must make sure all // of the register values we care about have been spilled to RAM. Luckily, // there is a HAL call to do it. There is a bit of a race condition here // because the register value could change after it's been restored but that // is unlikely to happen with a heap pointer while we do a GC. Fixes #2907	2020-05-28 18:34:14 -07:00
Scott Shawcroft	796373b8be	A number of small ESP32S2 fixes: * Fix flash writes that don't end on a sector boundary. Fixes #2944 * Fix enum incompatibility with IDF. * Fix printf output so it goes out debug UART. * Increase stack size to 8k. * Fix sleep of less than a tick so it doesn't crash.	2020-05-28 15:43:55 -07:00
Scott Shawcroft	a9419b5d46	Update ESP IDF	2020-05-28 15:38:48 -07:00
Lucian Copeland	9ee278d2ac	Merge remote-tracking branch 'upstream/master' into mimxrt-busio-cleanup	2020-05-28 12:24:37 -04:00
Lucian Copeland	fd00bb8b7f	Fix pin reset flash conflict error	2020-05-28 12:15:21 -04:00
Scott Shawcroft	9380c34cf7	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-05-27 10:47:08 -07:00
Scott Shawcroft	0db8b888d3	Merge pull request #2934 from hierophect/mimxrt-uart-oneway mimxrt10xx: add one-directional UART	2020-05-27 10:38:00 -07:00
Lucian Copeland	a59798ed49	Merge branch 'mimxrt-uart-oneway' into mimxrt-busio-cleanup	2020-05-27 12:31:16 -04:00
Lucian Copeland	9f5520135c	translations	2020-05-27 11:54:52 -04:00
Lucian Copeland	a25e10ed59	Merge branch 'mimxrt-uart-oneway' of https://github.com/hierophect/circuitpython into mimxrt-uart-oneway	2020-05-27 11:49:11 -04:00
Lucian Copeland	1e914ac2b0	Change exception text and type	2020-05-27 11:48:52 -04:00
Dan Halbert	d06a7c4671	Correct HiiBot BlueFi USB_PID Donated a PID set for HiiBot BlueFi.	2020-05-27 11:47:15 -04:00
Lucian Copeland	53fb699436	Add pin resetting across boards, fix array size detection issue	2020-05-27 11:45:15 -04:00
arturo182	ad988013f0	Merge pull request #2961 from arturo182/i2c-exception mimxrt10xx: Change exception type to match other ports	2020-05-27 11:24:46 +02:00
Sean Cross	aac5a4f178	watchdog: use common_hal_watchdog_* pattern This pulls all common functionality into `shared-bindings` and keeps platform-specific code inside `nrf`. Additionally, this performs most validation in the `shared-bindings` site. The only validation that occurs inside platform-specific `common-hal` code is related to timeout limits that are platform-specific. Additionally, all documentation is now inside the `shared-bindings` directory. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:38:29 +08:00
Sean Cross	e470376c12	nrf: add ticks (not subticks) to overflow count during reset Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:50 +08:00
Sean Cross	296ba101ec	nrf: set WDT priority to 2 The previous setting of `1` meant that the bluetooth system couldn't be used when the watchdog timer was enabled. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:50 +08:00
Sean Cross	d0f1b59be5	nrf: pca10100: disable some unused features to shrink image This removes some features that are largely unused in order to get the image to fit. Recommended in https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632859678 Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:50 +08:00
Sean Cross	33001f4e19	nrf: simmel: shrink filesystem to fit watchdog timer The watchdog timer has increased the amount of code and text that's required. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:50 +08:00
Sean Cross	daf7c2857d	nrf: port: save rtc value across reboots As part of the reset process, save the current tick count to an uninitialized memory location. That way, the current tick value will be preserved across reboots. A reboot will cause us to lose a certain number of ticks, depending on how long a reboot takes, however if reboots are infrequent then this will not be a large amount of time lost. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	5edc29c6a5	nrf: microcontroller: use port reset path For `microcontroller.reset()`, don't manually call NVIC_SystemReset(). Instead, call the `port_reset()` in case the port wants to do any cleanup. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	c7efc94a33	watchdog: move timeout exception to shared-bindings Make this exception globally available to all platforms that have enabled the watchdog timer. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	c5c13a8ba1	nrf: reset watchdog as part of port_reset() Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	108409c6cd	nrf: common-hal: finish reworking exceptions This finishes the rework of the exception handler, which is once again stored inside the watchdog timer module. This also implements a `watchdog_reset()` that is used to disable the RAISE watchdog, if one is enabled. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	bd086a102e	Revert "add WatchDogTimeout exception" This reverts commit 561e7e619095869f58fc728d428f3ff20e8bfc40.	2020-05-27 11:28:49 +08:00
Sean Cross	589cb1af6d	nrf: watchdog: use nrfx_wdt driver Instead of directly poking registers, use `nrfx_wdt`. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	e738f5eaa1	nrf: boot into safe mode sometimes for watchdog reset If the watchdog resets the system and we're plugged into USB, boot into safe mode. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	08362c9cab	watchdogtimer: refactor to new api This refactors the WatchDogTimer API to use the format proposed in https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632268227 Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	ae950bc050	add WatchDogTimeout exception This adds an exception to be raised when the WatchDogTimer times out. Note that this currently causes a HardFault, and it's not clear why it's not behaving properly. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	0169ea5155	nrf: discard arm exception sections Since these exceptions are unused, don't include them in the output binary. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	8f46133917	nrf: watchdog: implement software watchdogtimer This adds a software WatchDogTimer implementation that can be used for testing. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	595f6387c2	watchdog: rename module from `wdt` and move to `microcontroller` This also places it under the `microcontroller` object. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	c23f151b6b	nrf: enable wdt for all platforms Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:48 +08:00
Sean Cross	fbe1c05832	nrf: simmel: enable wdt support This enables WDT support for Simmel. Other platforms cannot yet use WDT because it overflows their flash storage. Enable CIRCUITPY_WDT support for the nrf target. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:48 +08:00
Sean Cross	abd01c5fbb	nrf: add watchdog module Add common-hal bindings to allow the watchdog module to be used on nrf platforms. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:48 +08:00
Sean Cross	17ef2df2ca	nrf: ld: add ARM.exidx to output image With the WDT changes, building Circuit Python results in the following error: /opt/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx LMA [00000000000621c8,00000000000621cf] overlaps section .data LMA [00000000000621c8,0000000000062383] This is because unwinding data is getting generated, but has nowhere to go. Re-enable this data in the linker script so it is saved. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:48 +08:00
Dan Halbert	3574670226	Merge pull request #2931 from tannewt/esp32s2_digitalio Finish digitalio and pin use tracking for ESP32S2	2020-05-26 19:18:45 -04:00
Scott Shawcroft	c917270da7	Merge pull request #2956 from hathach/fix-samd-wfi fix racing issue for SAMD when executing WFI	2020-05-26 14:54:24 -07:00
Scott Shawcroft	ffe0e0edc3	Merge pull request #2938 from DavePutz/issue2894 Add an increment to tcc_refcount to allow deinit to work correctly	2020-05-26 14:39:59 -07:00
arturo182	d6c59c4de0	mimxrt10xx: Change exception type to match other ports	2020-05-26 22:36:30 +02:00
Scott Shawcroft	665fe7a839	Merge pull request #2945 from pewpew-game/fluff_m0 Add support for Fluff M0	2020-05-26 13:18:55 -07:00
Scott Shawcroft	2ffd70417d	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-26 13:09:57 -07:00
Dan Halbert	19f0d82048	Merge pull request #2955 from BradChan/master Add hiibot_bluefi board definitions	2020-05-26 15:37:35 -04:00
Radomir Dopieralski	4974c933b1	Fix swapped SCK and MISO in Fluff M0	2020-05-26 03:29:05 +02:00
Dan Halbert	f1436410bd	Merge pull request #2951 from jepler/remove-modules-to-fit-translations Remove modules to fit translations	2020-05-25 09:51:57 -04:00
hathach	e79340601f	fix racing issue for SAMD when executing WFI	2020-05-25 20:51:02 +07:00
Jeff Epler	5cffd7e88d	trinket_m0_haxpress: disable RTC to make build fit with upcoming translations	2020-05-23 20:48:38 -05:00
Jeff Epler	eb85304d04	escornabot: disable RTC to make build fit with upcoming translations	2020-05-23 20:48:38 -05:00
Jeff Epler	03866c0598	meowmeow: disable modules to make build fit with upcoming translations	2020-05-23 20:41:25 -05:00
Jeff Epler	2ed40075a5	pyruler: disable RTC to make build fit with upcoming translations	2020-05-23 20:36:33 -05:00
Lucian Copeland	d95022f7bb	Merge remote-tracking branch 'upstream/master' into mimxrt-busio-cleanup	2020-05-22 13:33:08 -04:00
Radomir Dopieralski	4c01ddcbab	Add support for Fluff M0	2020-05-22 18:51:12 +02:00
hierophect	fe10a45533	Merge branch 'master' into mimxrt-uart-oneway	2020-05-22 11:32:41 -04:00
Lucian Copeland	75b5142954	Minor style changes and translations	2020-05-22 11:31:52 -04:00
jerryneedell	93df3b89e8	allow PORT specifcation for esp32s2 flashing	2020-05-22 09:54:29 -04:00
DavePutz	2e05f628f0	Add an increment to tcc_refcount to allow deinits to work properly	2020-05-21 11:08:26 -05:00
Scott Shawcroft	3bb6a32a20	Merge branch 'master' into esp32s2_digitalio	2020-05-21 08:52:39 -07:00
Sean Cross	67cf005ee5	nrf: nvm: assume sd is not enabled if interrupts are off If interrupts are disabled, then calling sd_* functions will hardfault. Instead, assume that it's safe to write if interrupts are disabled. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-21 22:04:20 +08:00
Sean Cross	fd4ef233c6	nrf: port: add memory barrier before wfi ARM recommends issuing a DSB instruction propr to issuing WFI, as it is required on many parts suchas Cortex-M7. This is effectively a no-op on the Cortex-M4 used in most NRF parts, however it ensures that we won't be surprised when new parts come out. See http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0321a/BIHICBGB.html for more information. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-21 21:46:37 +08:00
Sean Cross	77cf4dce8f	nrf: disable interrupts before running wfi In order to ensure we don't have any outstanding requests, disable interrupts prior to issuing `WFI`. As part of this process, check to see if there are any pending USB requests, and only execute the `WFI` if there is no pending data. This fixes #2855 on NRF. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-21 21:43:52 +08:00
jason	4f54514be4	Initial version	2020-05-20 21:11:06 -05:00
Scott Shawcroft	c32214ccc7	Merge pull request #2932 from simmel-project/nrf-rtc-reset nrf: reset rtc as part of port_reset()	2020-05-20 11:39:16 -07:00
Scott Shawcroft	a43876ad1e	Fix esp wrover	2020-05-20 11:37:29 -07:00
Scott Shawcroft	0af5dd59f2	Merge pull request #2898 from hierophect/mimxrt-claiming MIMXRT: Implement pin claiming, pin reset, and pin protections	2020-05-20 11:32:22 -07:00
Scott Shawcroft	ba724fffb4	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-20 10:48:27 -07:00
Lucian Copeland	66c09efae2	Add UART one-way instance search, fix bugs in stm32 implementation	2020-05-20 12:48:01 -04:00
Scott Shawcroft	fd0420d432	Update digitalio api for other ports	2020-05-20 09:23:42 -07:00
Sean Cross	4cca455c9b	nrf: reset rtc as part of port_reset() On NRF, the `rtc_reset()` function is never called. As a result, calls to `time.time()` return a cryptic error> ``` >>> import time >>> time.time() '' object has no attribute 'datetime' >>> ``` This is because `MP_STATE_VM(rtc_time_source)` is not initialized due to `rtc_reset()` never being called. If `CIRCUITPY_RTC` is enabled, call `rtc_reset()` as part of the `reset_port()` call. This ensures that `time.time()` works as expected. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-20 16:44:18 +08:00
Scott Shawcroft	80517c4cf6	First try at critical section support	2020-05-19 17:49:17 -07:00
Scott Shawcroft	49090d1378	Fully implement digitalio and pin-in-use tracking. Fixes #2901	2020-05-19 17:46:29 -07:00
Scott Shawcroft	916ca9f8a6	Merge pull request #2910 from tannewt/esp32s2 Add initial ESP32S2 support	2020-05-19 12:53:23 -07:00
Lucian Copeland	38fd9c25f2	Re-add APA102	2020-05-19 15:33:34 -04:00
Scott Shawcroft	acf4b1bede	Remove reverse methods from per-board defs	2020-05-19 11:43:57 -07:00
Lucian Copeland	b310b04007	Remove pin/port distinction	2020-05-19 14:20:07 -04:00
Scott Shawcroft	9eb85a5feb	shrink Xinabox CS11 by turning off unused pins	2020-05-19 10:55:02 -07:00
Lucian Copeland	2acd173e14	Implement core requested changes	2020-05-19 13:54:47 -04:00
Sean Cross	c1bcc25b88	nrf: _bleio: clean up timeout calculation The timeout value is calculated by the common-hal layer now, so we don't need to be quite so clever about calculating it here. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 21:56:39 +08:00
Sean Cross	34f91f01c6	bleio: adapter: add advertising timeout and status Add a field to allow specifying a timeout when initiating advertising. As part of this, add a new property to determine if the device is still advertising. Additionally, have the `anonymous` property require a timeout, and set the timeout to the maximum possible value if no timeout is specified. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 15:01:19 +08:00
Sean Cross	cfe65742a3	_bleio: support anonymous advertising Add a new parameter to the `start_advertising()` function to enable anonymous advertising. This forces a call to `sd_ble_gap_privacy_set()` with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and `private_addr_type` set to `BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`. With this, addresses will cycle at a predefined rate (currently once every 15 minutes). Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 15:01:18 +08:00
Scott Shawcroft	2c2b53303d	Merge pull request #2837 from k0d/serial-debug Add support for a debug console, such as ST-Link VCP.	2020-05-18 18:13:31 -07:00
Scott Shawcroft	03b6f7b87b	Add commend about FreeRTOS stack canary	2020-05-18 17:28:13 -07:00
Scott Shawcroft	164628282d	Update TinyUSB and shorten USB task delay	2020-05-18 17:27:49 -07:00
Mark Olsson	007c92ee6a	Enable showing the console on a debug uart	2020-05-19 02:02:52 +02:00
Scott Shawcroft	cf690bd390	Merge remote-tracking branch 'adafruit/master' into esp32s2	2020-05-18 16:46:41 -07:00
Scott Shawcroft	32617d5f2f	Merge pull request #2925 from arturo182/imx-spi mimxrt1010: Increase max SPI speed	2020-05-18 15:22:42 -07:00
Scott Shawcroft	ebfc1f2599	Merge pull request #2926 from arturo182/imx-temperature-fix mimxrt10xx: Fix cpu.temperature crash	2020-05-18 15:20:21 -07:00
Scott Shawcroft	af68ddebef	Merge pull request #2924 from simmel-project/nrf-rtc-persist NRF: Persist RTC offset across reboots	2020-05-18 15:06:42 -07:00
Scott Shawcroft	9811c1fe4b	Merge pull request #2896 from theacodes/add-bytearray-decode Add bytearray.decode() for CPython compatibility	2020-05-18 14:38:45 -07:00
arturo182	058a73128c	mimxrt10xx: Fix cpu.temperature crash Fixes #2514	2020-05-18 22:30:50 +02:00
arturo182	f92d53eaab	mimxrt1010: Increase max SPI speed	2020-05-18 22:07:38 +02:00
Sean Cross	9f7c26c60d	nrf: port: call common_hal_rtc_init() during init Call the new function to set the RTC, or reset it if the offset is not valid. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-18 11:52:30 +08:00
Sean Cross	83680c41db	nrf: rtc: persist rtc offset across reboots Store the RTC value in the .uninitialized section, but make sure to flank it with some known values. That way we can determine if the RTC value has been initialized, or if it's random uninitialized garbage. As part of this, add a `common_hal_rtc_init()` routine to determine if the value is correct, or reset it to 0 if it is not valid. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-18 11:52:27 +08:00
Sean Cross	3b5f5ddaa6	nrf: port: move saved word into .uninitialized section Circuit Python supports saving a single word of data across reboots. Previously, this data was placed immediately following the .bss. However, this appeared to not work, as Circuit Python zeroes out the heap when it starts up, and the heap begins immediately after the .bss. Switch to using the new .uninitialized section in order to store this word across resets. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-18 11:52:25 +08:00
Sean Cross	192bb155fa	nrf: port: move the heap after .uninitialized Previously, it was placed following .bss. However, now that there is a new section after .bss, the heap must be moved forward. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-18 11:52:20 +08:00
Sean Cross	f002c784c0	nrf: linker: add a new .uninitialized section This section immediately follows the .bss section, and is designed to contain uninitialized variables that should persist across reboots. The section is placed directly after .bss, under the theory that the size of Circuit Python's .bss + .data is bigger than the bootloader's .bss + .data, so there is less likely to be a conflict. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-18 11:52:17 +08:00
cyz	4f7b4241a2	add hiibot_bluefi	2020-05-18 09:42:37 +08:00
Dan Halbert	e175a64036	disable rotaryio in CPX crickit	2020-05-15 20:35:12 -04:00
Scott Shawcroft	a57da6b808	Add port_fixed_stack for more spresence	2020-05-15 17:22:41 -07:00
Scott Shawcroft	8edb8e87c8	Turn reverse methods off for trinket haxpress	2020-05-15 17:22:22 -07:00
Scott Shawcroft	86f865afe0	Turn reverse methods off for cpx_crickit	2020-05-15 16:42:22 -07:00
Scott Shawcroft	3c1469b0a5	Add port_fixed_stack for more builds	2020-05-15 16:22:33 -07:00
Scott Shawcroft	6aaab005c5	Initial ESP32S2 port. Basic blinky works but doesn't check pins.	2020-05-15 15:36:16 -07:00
Dan Halbert	a3ca9401b4	Shrink crickit build	2020-05-15 18:29:37 -04:00
Lucian Copeland	99538c2414	Implement pin claiming, pin reset, and pin protections	2020-05-15 15:16:51 -04:00
Scott Shawcroft	0d8bca92e2	Merge pull request #2810 from dherrada/master Pyi integration	2020-05-15 10:31:05 -07:00
Scott Shawcroft	db4dbe0752	Merge pull request #2889 from jepler/gamepad-tick Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick	2020-05-13 11:53:23 -07:00
Jeff Epler	eb876e21c3	nrf: code style	2020-05-13 10:40:41 -05:00
Jeff Epler	011acf41c0	nrf: Ensure ticks enabled while playing audio	2020-05-13 10:40:36 -05:00
Jeff Epler	adef45403b	samd: audio dma: enable/disable supervisor tick as needed	2020-05-13 10:29:36 -05:00
Scott Shawcroft	7546d47f77	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-13 08:23:55 -07:00
Scott Shawcroft	80129c5a21	Disable countio on trinket haxpress	2020-05-12 18:55:49 -07:00
Scott Shawcroft	cde6651721	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-12 18:23:59 -07:00
Scott Shawcroft	277e8d528b	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 18:22:57 -07:00
Scott Shawcroft	4e8de3c554	Swap sphinx to autoapi and the inline stubs	2020-05-12 17:28:24 -07:00
warriorofwire	5a80f5e606	nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size	2020-05-12 15:23:00 -07:00
Scott Shawcroft	d274074f01	Merge remote-tracking branch 'adafruit/master' into vectorio	2020-05-12 12:29:05 -07:00
Scott Shawcroft	bc40034a08	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 12:12:51 -07:00
Scott Shawcroft	f7303e6bd0	Merge pull request #2754 from maholli/non-standard-nvm Add non-standard nvm to QSPI for external flash support	2020-05-12 11:56:33 -07:00
Daniel Pollard	62bdfb74e3	removed lib from catwan_usbstick - updated transalations overflowed	2020-05-12 16:40:23 +10:00
Daniel Pollard	5e5461e77e	removed countio from catwan_usbstick build	2020-05-12 16:32:35 +10:00
Daniel Pollard	ee2cb703c8	merged master	2020-05-12 14:41:28 +10:00
Sean Cross	ffaeeda749	nrf: simmel: decrease flash filesystem size The flash filesystem must be reduced in order to allow the current build to fit. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-12 09:31:51 +08:00
Sean Cross	f7fcd43516	nrf: simmel: disable SPIM3 Disable the SPIM3 controller to avoid needing to dedicate 8 kB to the SPIM3 block. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-12 09:31:51 +08:00
Sean Cross	370fc7293a	nrf: support disabling SPIM3 SPIM3 is faster than all other SPI blocks, and is capable of generating a 32 MHz clock. However, it cannot be used at the same time as the BLE radio without dedicating an additional 8 kB of RAM to it. Therefore, some boards may want to disable this. Support pre-defining NRFX_SPIM3_ENABLED on the command line to disable it on some bords. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-12 09:31:51 +08:00
Sean Cross	79c055f958	nrf: simmel: enable aesio This adds AES support to simmel. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-12 09:31:51 +08:00
Sean Cross	235098efb8	nrf: simmel: correct CSn pin The CSn pin is pin 6 on bank 1, not bank 0. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-12 09:31:51 +08:00
Scott Shawcroft	62b835ad76	Merge pull request #2833 from xiongyihui/pitaya-go add nRF52840 based Makerdiary Pitaya Go	2020-05-11 16:34:27 -07:00
Scott Shawcroft	4937d5f1ca	Merge pull request #2866 from hierophect/stm32-lsetimeout STM32: Fix LSE hang at startup	2020-05-11 16:23:09 -07:00
Scott Shawcroft	55f78bfb70	Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol ujson: work with mp stream protocol for fast & easy read	2020-05-11 15:40:27 -07:00
Scott Shawcroft	801d9655e5	Merge pull request #2881 from DavePutz/Issue2872 Added call to rtc_reset() to fix Issue #2872	2020-05-11 15:30:32 -07:00
Lucian Copeland	94949fb46f	Add recovery domain write access, adjust stack	2020-05-11 18:02:40 -04:00
Scott Shawcroft	61450cbd56	Add Teensy 4.1 board definition	2020-05-11 13:58:58 -07:00
Lucian Copeland	248704b262	Merge remote-tracking branch 'upstream/master' into stm32-lsetimeout	2020-05-11 14:18:37 -04:00
DavePutz	407938bf3a	Added a check for platforms supporting RTC before calling rtc_reset() Added an #if CIRCUITPY_RTC check for platforms supporting RTC	2020-05-11 12:03:44 -05:00
DavePutz	2ddfab315c	Added call to rtc_reset() in rtc_init() Fix for issue #2872. The rtc_time_source had not been initialized; causing a time.time() call to fail.	2020-05-11 11:31:18 -05:00
warriorofwire	eb3d5fa453	ujson: do not eat trailing whitespace Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers. When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout. Fixes: - Waiting for a timeout after you have completed reading a correct and complete JSON off the input. - Raising an OSError after reading a correct and complete JSON off the input. - Eating more data than semantically owned off the input buffer. - Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object. Code you would write before: ``` line = board_busio_uart_port.read_line() json_dict = json.loads(line) ``` or reaching for fixed buffers and swapping them around in Python. Code that did not work before that does now: ``` json_dict = json.load(board_busio_uart_port) ``` - This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs. - It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA. - It simplifies code that users write while improving their apps.	2020-05-10 20:45:42 -07:00
warriorofwire	206d0e598a	Add vectorio: for drawing shapes vectorio builds on m4 express feather Concrete shapes are composed into a VectorShape which is put into a displayio Group for display. VectorShape provides transpose and x/y positioning for shape implementations. Included Shapes: * Circle - A radius; Circle is positioned at its axis in the VectorShape. - You can freely modify the radius to grow and shrink the circle in-place. * Polygon - An ordered list of points. - Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last point and the first point. - You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape x and y properties will position the rectangle relative to its top center point * Rectangle A width and a height.	2020-05-09 15:38:22 -07:00
Max Holliday	e6df8e0989	Merge branch 'master' into non-standard-nvm	2020-05-09 12:22:50 -07:00
Dan Halbert	8d00d99ca0	Shrink hallowing_m0_express to fit ko build	2020-05-08 22:51:21 -04:00
Lucian Copeland	5249a7b02c	Add timeout and adjustment to LSI	2020-05-08 12:36:39 -04:00
Jeff Epler	182ae10080	Fix build after #2831 (stm32f4xx rgbmatrix) broke it	2020-05-07 18:32:50 -05:00
Scott Shawcroft	c3b3eb4c21	Merge pull request #2831 from jepler/rgbmatrix-stm stm: enable RGBMatrix	2020-05-06 08:35:25 -07:00
Scott Shawcroft	4519ddebeb	Merge pull request #2841 from hierophect/mimxrt-spi-oneway mimxrt10xx: add one-directional SPI	2020-05-06 08:32:21 -07:00
Daniel Pollard	7f1be814c8	changed build variables as per advice	2020-05-06 09:04:15 +10:00
Lucian Copeland	a1330747e8	text fixes, postpone warning disable	2020-05-05 12:46:30 -04:00
hierophect	c311b5c002	Merge pull request #2842 from hierophect/stm32-h7-displayio STM32: Add displayio to F7/H7	2020-05-05 12:37:08 -04:00
Daniel Pollard	f63ee9fb9b	excluded countio from other smaller boards	2020-05-05 16:15:57 +10:00
Daniel Pollard	d5c24b99b8	hallowing m0 - exclude countio	2020-05-05 16:04:28 +10:00
Daniel Pollard	bfa5cd9c13	refactor countio based on feedback	2020-05-05 15:23:38 +10:00
Dan Halbert	b7836aeac6	address review comments	2020-05-04 19:51:08 -04:00
Dan Halbert	bae7a5e433	make translate again	2020-05-04 17:26:59 -04:00
Dan Halbert	602eabe668	Squeeze hallowing_m0_express build slightly ko build is a little too big.	2020-05-04 17:18:53 -04:00
Dan Halbert	c377d4bea7	Merge branch 'master' into non-standard-nvm	2020-05-04 16:08:45 -04:00
Dan Halbert	d6c6f9f4f0	add PacketBuffer .incoming_ and .outgoing_packet_length	2020-05-04 15:59:45 -04:00
Dan Halbert	4d7e341e44	Merge pull request #2844 from xobs/add-nrf-pca10100 nrf: add pca10100	2020-05-04 10:51:01 -04:00
Sean Cross	b128399d1e	nrf: simmel: enable CIRCUITPY_USB_HID Simmel had USB HID disabled in order to save space. However, the board configuration did not set USB_DEVICES, causing it to inherit the default device bouquet of MSC,CDC,MIDI,HID. This in turn caused HID to be included in the USB Configuration Descriptor. For some reason, this was not a problem in an earlier version of tinyusb or circuitpython. However, in the most recent version this has rightfully caused asserts to appear during configuration. Re-enable USB_HID for now, as it doesn't add too much in terms of space. We may disable it again later on if we become pressed for space. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-04 15:37:53 +08:00
Sean Cross	cb4fc894d7	nrf: add pca10100 This is the nRF52833-DK board. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-04 15:07:49 +08:00
Lucian Copeland	61b0994631	Fix flag typo	2020-05-01 14:46:06 -04:00
Lucian Copeland	bc581fbdfb	Add-unidirectional-SPI	2020-05-01 13:15:38 -04:00
Yihui Xiong	7dd3ddc06b	use Nordic's VID which seems to be allowed https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840	2020-05-01 06:10:43 +00:00
Scott Shawcroft	a863b0a349	Fix openmv_h7 build	2020-04-30 13:46:12 -07:00
Scott Shawcroft	1ca90572f1	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-30 13:25:31 -07:00
hierophect	10c5bf666e	Merge pull request #2836 from hierophect/stm32-openmv-pid STM32: Add correct PID for the OpenMV	2020-04-30 16:07:34 -04:00
Lucian Copeland	06b62721b3	Increase H7 filesystem size	2020-04-30 15:49:17 -04:00
Scott Shawcroft	74a2d0944a	Merge pull request #2834 from Teknikio/fix/bluebird_pinout Update teknikio bluebird pin assignments	2020-04-30 11:50:02 -07:00
Lucian Copeland	435aa3d055	Add correct PID for the OpenMV	2020-04-30 14:49:47 -04:00
Lucian Copeland	4f71bd295d	Make PulseIO optional within DisplayIO	2020-04-30 14:47:50 -04:00
Scott Shawcroft	f44e1d6a8d	Merge pull request #2828 from simmel-project/add-simmel WIP: add simmel board	2020-04-30 11:40:34 -07:00
Lucian Copeland	89ff5589c4	Add the OpenMV-H7 R1 board	2020-04-30 12:39:20 -04:00
Jeff Epler	e5be728c1c	stm: enable protomatter Testing performed: on stm32f405 feather, all pins change in plausible ways on a logic probe. Didn't actually drive a display yet.	2020-04-30 08:58:58 -05:00
JoeBakalor	36a71560c2	update teknikio bluebird pin assignments	2020-04-30 09:58:27 -04:00
Yihui Xiong	4393a88fb6	add nRF52840 based Makerdiary Pitaya Go	2020-04-30 07:38:20 +00:00
Dan Halbert	241d7e2ae6	change many ifndefs to ?=	2020-04-29 23:31:34 -04:00
Dan Halbert	f3078511a6	further cleanup and bug fixing	2020-04-29 23:18:08 -04:00
Sean Cross	6aac9233db	nrf: bluetooth: add s147 v7.0.1 softdevice hexfile This was not added as part of the initial v7.0.1 patchset because .hex files are in this project's .gitignore, and so git ignored it. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-30 10:43:46 +08:00
Dan Halbert	180f5c6a94	Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes	2020-04-29 22:11:22 -04:00
Dan Halbert	3d62f87e29	back to '.packet_size' for compatiblity	2020-04-29 22:10:56 -04:00
Dan Halbert	84cee1ab8d	rename and improve PacketBuffer packet length property	2020-04-29 17:49:31 -04:00
Scott Shawcroft	3799c34564	Disable bitbangio on CPX Crickit so we have room for lower_power. Enable pixelbuf in its place because we'll need it soon.	2020-04-29 13:57:09 -07:00
Scott Shawcroft	a30ff70b4e	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-29 10:51:21 -07:00
Sean Cross	1d0781bf12	nrf: add simmel board This adds support for Simmel, an nRF52833-based bluetooth tracking board designed to aid in pandemic tracing. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-29 11:40:00 +08:00
Scott Shawcroft	2d7cf4b792	Merge pull request #2819 from hierophect/stm32-readme STM32: Add port readme, make flash	2020-04-28 12:32:03 -07:00
Max Holliday	b2de5a9df9	fixing my goofy gcc-arm local stuff	2020-04-28 12:24:10 -07:00
Max Holliday	6c4decd4e2	decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE	2020-04-28 11:51:07 -07:00
Max Holliday	baad9c11df	Merge branch 'master' into non-standard-nvm_cleanup	2020-04-28 11:42:58 -07:00
TG-Techie	b9e494b85a	add submodule to TG-Watch02A	2020-04-28 00:03:02 -04:00
Scott Shawcroft	b7804f450b	Fix stm32746g_discovery Also, rename it so that matches the other board names.	2020-04-27 20:34:42 -07:00
Scott Shawcroft	e45de39998	Fix nucleo_f746zg build	2020-04-27 20:28:05 -07:00
TG-Techie	76b466a38a	add submodule to TG-Watch02A	2020-04-27 22:49:30 -04:00
Lucian Copeland	2a0e176a77	Add readme and dfu-flashing	2020-04-27 20:51:47 -04:00
Scott Shawcroft	de42e4af02	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-27 17:43:32 -07:00
Scott Shawcroft	40a1f3edbc	Merge pull request #2811 from jepler/update-ulab ulab: actually update the submodule	2020-04-27 17:41:43 -07:00
Scott Shawcroft	755d404edf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-27 16:45:10 -07:00
Dan Halbert	faa50df05f	Merge pull request #2817 from jepler/stm-linker-scripts Standardize on FLASH_FIRMWARE section name in linker scripts	2020-04-27 18:43:26 -04:00
Jeff Epler	7f0f0b30d3	linker scripts: Re-align at ":" With "git show -b" you can verify that this is a whitespace only change because the diff will be empty.	2020-04-27 17:17:42 -05:00
Max Holliday	86943ca8a1	Merge remote-tracking branch 'adafruit/master'	2020-04-27 13:51:51 -07:00
Jeff Epler	7eff89e9f9	linker scripts: Re-align at ":" With "git show -b" you can verify that this is a whitespace only change because the diff will be empty.	2020-04-27 12:47:52 -05:00
hierophect	d9e4155815	Merge branch 'master' into stm32f7_os	2020-04-27 12:58:15 -04:00
Mark Olsson	31d8e46063	Enables os on STM32F7 os.uname() works os.urandom() doesn't work yet, will enable in another PR	2020-04-27 18:18:43 +02:00
Mark Olsson	f9096d83ac	Enables PulseIO on STM32F7 Tested on nucleo_f746zg	2020-04-27 17:55:07 +02:00
Jeff Epler	6f6dc835d2	litex: Use FLASH_FIRMWARE instead of FLASH in linker scripts for compatibility with the build_memory_info script	2020-04-27 09:12:45 -05:00
Jeff Epler	808b456927	mimxrt10xx: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts for compatibility with the build_memory_info script This change was scripted: git grep -l FLASH_TEXT \| xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/	2020-04-27 08:07:47 -05:00
Jeff Epler	aff42defda	stm: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts for compatibility with the build_memory_info script This change was scripted: git grep -l FLASH_TEXT \| xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/	2020-04-27 08:07:28 -05:00
Jeff Epler	485f667141	ulab: disable on espruino pico this non-"express" board is nearly full. Right now it's actually possible just to disable the "compare" module, but as this leaves it packed pretty full I prefer to fully disable it in order to avoid the topic returning again soon.	2020-04-27 07:47:05 -05:00
Scott Shawcroft	9e4b94f466	Merge pull request #2805 from tannewt/update_tinyusb Update tinyusb	2020-04-26 20:55:36 -07:00
hierophect	652a5de242	Merge pull request #2809 from k0d/stm32f767xx_fix Adds missing declarations in periph.h for stm32f767xx	2020-04-25 14:16:34 -04:00
Mark Olsson	8814dd038e	Adds missing declarations in periph.h for stm32f767xx	2020-04-25 19:50:48 +02:00
Scott Shawcroft	67c053e9c4	Add USB include for LiteX	2020-04-24 17:24:05 -07:00
Scott Shawcroft	5c7f6e6211	Remove empty #if and add missing includes.	2020-04-24 11:48:55 -07:00
Mark Olsson	91fbbcab19	adds support for the stm32f746g_disco board	2020-04-24 16:43:39 +02:00
Dan Halbert	5a22a5d016	Merge pull request #2598 from hierophect/stm32-docfix Add stm to docs matrix	2020-04-24 10:07:15 -04:00
Dan Halbert	982a755eae	Merge pull request #2801 from simmel-project/nrf-s140-7.0.1 Add NRF S140 7.0.1	2020-04-23 21:59:51 -04:00
Lucian Copeland	bd0df9e3bc	Minor redundancy fix	2020-04-23 17:43:35 -04:00
Lucian Copeland	c6c77726e7	Merge remote-tracking branch 'upstream/master' into stm32-docfix	2020-04-23 13:39:48 -04:00
Lucian Copeland	8791ca6af3	implement requested changes	2020-04-23 13:33:41 -04:00
hierophect	ead7c6c887	Merge pull request #2785 from k0d/ports_nucleo_f746zg STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board	2020-04-23 12:32:44 -04:00
Mark Olsson	83cc9783cc	STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board	2020-04-23 10:48:27 +02:00
Scott Shawcroft	f13de32208	Add HSE_VALUE for STM feather.	2020-04-22 14:37:24 -07:00
Lucian Copeland	d0a2106547	Remove old build flags, add fixes for shared_matrix	2020-04-22 16:06:08 -04:00
Scott Shawcroft	b277944cf0	Fix STM so it matches the correct RTC fields.	2020-04-22 11:10:51 -07:00
Sean Cross	689dd61379	nrf: nrf52833: use s140 v7.0.1 Previously, we were using v6.1.1 which worked, but was unsupported. v7.0.1 is the first version of s140 that supports the nRF52833. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-22 13:34:11 +08:00
Sean Cross	09bef7b0e1	nrf: bluetooth: add s140 v7.0.1 This is the first version with official support for nRF52833. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-22 13:33:39 +08:00
Dan Halbert	2f86e31501	fix calculation of nrf firmware size	2020-04-22 00:52:54 -04:00
Dan Halbert	fbc8719fad	ringbuf tested	2020-04-21 22:40:12 -04:00
Dan Halbert	77cd93ac2d	merge from adafruit	2020-04-21 17:47:51 -04:00
Dan Halbert	38ec3bc574	further ringbuf cleanup	2020-04-21 17:38:20 -04:00
Scott Shawcroft	dcb0e50f04	Fix USB midi and hid disable.	2020-04-21 14:15:44 -07:00
Scott Shawcroft	5cc8a3ec82	Add back fake us delay.	2020-04-21 14:14:49 -07:00
Scott Shawcroft	17d038830d	Use our own flag for board crystal config.	2020-04-21 14:14:30 -07:00
Sean Cross	c04e6d6f52	nrf: bleio: parameterize softradio configuration Allow for setting various softradio memory settings as part of a board in order to support lower-memory configurations. If a parameter is unspecified then the previously-defined value is used. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 12:29:59 +08:00
Sean Cross	3537ad4059	nrf: mpconfigport: support configuration of various sizes Conditionally set variables such as the softdevice RAM size, bootloader size, and the spi m3 buffer size. This allows ports to adjust these values to suit their needs. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 12:29:58 +08:00
Sean Cross	33720af0c6	nrf: mpconfigport: subtract config size from firmware size The BLE Config area needs to be subtracted from the size of the firmware. THis is because the firmware is counted by walking backwards from the end of memory, and the BLE config area is placed lower in memory than the firmware. Subtracting the BLE config size ensures the internal flash filesystem doesn't try to use the firmware as storage. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 12:29:57 +08:00
Sean Cross	3ed5b87b8f	nrf: add support for nrf52833 This adds preliminary support for the nRF52833, which is a variant of the nRF52840 with half the RAM, half the flash, and fewer peripherals. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 12:29:56 +08:00
Sean Cross	4ad1cbeea3	nrf: make rgbmatrix and framebufferio optional Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0 in their .mk file in order to prevent these from being built. This is necessary for resource-constrained devices. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 10:44:21 +08:00
Sean Cross	066f486b28	nrf: supervisor: support building without BUSIO Only initialize i2c, spi, and uart if building with BUSIO. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 10:44:20 +08:00
Sean Cross	ac9d336f40	nrf: make neopixel support optional Add a conditional around the call to neopixel_write(), allowing us to build for nrf without neopixel support. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-21 09:56:27 +08:00
Scott Shawcroft	bebf27e733	Merge remote-tracking branch 'adafruit/master' into lower_power This isn't perfect and needs a bit more testing.	2020-04-20 18:25:13 -07:00
Scott Shawcroft	a4d86b96fd	Merge pull request #2777 from pewpew-game/master Fix RGB/BGR colors in Stage	2020-04-20 15:25:29 -07:00
Mark Olsson	506f340c7d	STM32: f767: Fixes linker settings.	2020-04-20 19:15:18 +02:00
Jeff Epler	5fcc6d6286	RGBMatrix: finish renaming from Protomatter This gets all the purely internal references. Some uses of protomatter/Protomatter/PROTOMATTER remain, as they are references to symbols in the Protomatter C library itself.	2020-04-17 18:44:07 -05:00
Jeff Epler	3d6258f63d	Rename Protomatter -> RGBMatrix This is a quick rename, it changes the user-facing names but not the internal names of things.	2020-04-17 18:43:57 -05:00
Jeff Epler	a32337718d	Rename _protomatter -> protomatter I originally believed that there would be a wrapper library around it, like with _pixelbuf; but this proves not to be the case, as there's too little for the library to do.	2020-04-17 18:43:57 -05:00
Scott Shawcroft	7e3d4c61b5	Update TinyUSB and add interrupt hooks.	2020-04-17 14:16:49 -07:00
hierophect	1a71c8c515	Merge pull request #2735 from hierophect/stm32x7-setup STM32: Add F7 and H7 Support	2020-04-17 13:02:09 -04:00
Radomir Dopieralski	43022d8294	Add copyrights to pewpew m4 and ugame board.c	2020-04-17 09:50:11 +02:00
Lucian Copeland	9e49fc13f4	startup file crash fix, H7 bin fix	2020-04-16 17:33:48 -04:00
Scott Shawcroft	5b0d9bdeb0	Update copyright to bump the CI	2020-04-16 14:21:26 -07:00
Scott Shawcroft	b3552efc76	Remove accidental file	2020-04-16 11:28:01 -07:00
Sean Cross	61f777c9c6	litex: enable binascii and ujson modules Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-16 10:02:08 +08:00
Sean Cross	bb527ac9ea	litex: disable minimal build Manually specify available modules and disable any modules that are currently unsupported on the litex target. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-16 09:26:08 +08:00
Sean Cross	db3933429a	litex: add os module Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-16 09:26:08 +08:00
Sean Cross	6885ffc9af	litex: mphalport: add fake mp_hal_delay_us Add a mp_hal_delay_us, which is required by some of the modules, that simply calls mp_hal_delay_ms / 1000. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-16 09:26:08 +08:00
Radomir Dopieralski	f39ca6052e	Fix RGB/BGR colors in Stage This makes the colors used by the stage library compatible with those used by the displayio library.	2020-04-15 23:41:38 +02:00
Lucian Copeland	00b2e6a1db	Fix korea translation error, minor submodule change	2020-04-15 13:11:14 -04:00
Lucian Copeland	54abfc2e8b	translations-merge	2020-04-15 10:29:05 -04:00
Lucian Copeland	6427994b14	Implement requested changes	2020-04-15 10:22:51 -04:00
Scott Shawcroft	b580b34cbf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-14 17:14:44 -07:00
Scott Shawcroft	7dfcae6067	Tweaks from jepler	2020-04-14 17:09:48 -07:00
Jeff Epler	23bced26da	samd: actually disable protomatter timer Just setting the timer handler to NO_INTERRUPT doesn't stop the interrupt from occurring.	2020-04-14 18:24:58 -05:00
Jeff Epler	759fdffda5	Update ports/atmel-samd/boards/pyportal_titano/board.c Co-Authored-By: Scott Shawcroft <scott@tannewt.org>	2020-04-14 18:24:58 -05:00
Jeff Epler	1d8a073c05	nrf: protomatter port	2020-04-14 18:24:58 -05:00
Jeff Epler	09dc46a984	Add Protomatter and FramebufferDisplay	2020-04-14 18:24:54 -05:00
Jeff Epler	a51d4f7a45	pycubed: add trailing newline to file POSIX specifies that text files end in a trailing newline	2020-04-14 18:24:54 -05:00
Jeff Epler	db01f88cc3	enable MICROPY_PY_REVERSE_SPECIAL_METHODS where ulab is enabled	2020-04-13 19:58:52 -05:00
Lucian Copeland	83a55f65a4	Implement cache-based reads	2020-04-13 15:14:38 -04:00
Lucian Copeland	426d2afe28	Fix pin mapping for the H7 Nucleo	2020-04-13 14:36:49 -04:00
Lucian Copeland	6227e63cc5	Merge remote-tracking branch 'upstream/master' into stm32x7-setup	2020-04-13 12:03:56 -04:00
Lucian Copeland	5ac38c95cc	Various requested fixes	2020-04-13 12:03:05 -04:00
Sabas	cac4fb0318	Merge branch 'master' into nfc_copy	2020-04-09 17:05:11 -05:00
sabas1080	49771b4d7f	Update to v1.3	2020-04-09 14:27:51 -05:00
Lucian Copeland	92a0621e59	Add busio support, cleanup	2020-04-09 13:43:19 -04:00
Scott Shawcroft	01941c027b	Fix up STM Enable the Alarm IRQ earlier and correct bit clearing.	2020-04-08 14:41:57 -07:00
Scott Shawcroft	d0a25ca9ac	Tweaks based on dhalberts feedback	2020-04-08 10:49:46 -07:00
Max Holliday	181ecf4a9b	fixing my goofy CROSS_COMPILE fix	2020-04-07 21:54:46 -07:00
Max Holliday	a53a26be70	missed a debug flag	2020-04-07 18:24:53 -07:00
Max Holliday	826837186c	adds standard (non-queued) SPI support to QSPI for external flash	2020-04-07 18:17:25 -07:00
Scott Shawcroft	6544bf52fb	Enable SNVS interrupt The iMX RT has a separate wake up controller, the GPC, that replaces the NVIC when asleep. It adds the ability to only wake up on certain interrupts. It seems that it requires at least one enabled interrupt in the NVIC to turn on it's wake up circuitry. It doesn't need to be the same interrupt as the wake up signal. For example, the RTC in the SNVS can wake us up if a USB interrupt is enabled. Before then it won't work. So, we enable the SNVS interrupt on start up so it can wake us up.	2020-04-07 17:15:18 -07:00
Scott Shawcroft	aae0ce6bad	Fix autoreload and ticks on IMX RT	2020-04-07 14:16:07 -07:00
Scott Shawcroft	a8dfba235c	Fix alarm so that it is correctly set.	2020-04-07 13:07:29 -07:00
Scott Shawcroft	c0ba2a839f	Updates based on feedback from jepler	2020-04-06 16:03:31 -07:00
arturo182	08f369ea96	mimxrt1011: Only re-init SPI when it's actually needed If some crazy code (cough FourWire) decides to reconfigure the bus before every transfer, it might get a bit slow...	2020-04-06 22:10:12 +02:00
Scott Shawcroft	e99cf6e441	Rework sleep timing It didn't account for background task time and could end up sleeping for way longer than it should because the RTC compare time had already passed.	2020-04-03 18:07:56 -07:00
Scott Shawcroft	7e69d30c02	Fix nRF PulseIn	2020-04-03 14:22:56 -07:00
Lucian Copeland	9761672d42	Linker file restructure, TCM and MPU additions	2020-04-03 16:33:18 -04:00
Scott Shawcroft	46af4bdd0e	Fix SAMD21 PulseIn	2020-04-02 17:35:52 -07:00
Lucian Copeland	47a5d83267	Implement F7 Nucleo	2020-04-02 11:47:16 -04:00
Sean Cross	9845a064ad	ports: fomu: move more functions into ram for stability The SPI flash on current Fomu firmware is slow. Circuitpython runs XIP from SPI flash, and so execution time can also be slow. Ordinarily this isn't a problem, however certain operations are time-sensitive. In particular, USB function needs to be handled quickly in order to prevent the host from re-enumerating the device. Place several critical TinyUSB structures into RAM, as well as several hot functions that are frequently called. This reduces execution time at the expense of system memory, and greatly improves system stability. Signed-off-by: Sean Cross <sean@xobs.io>	2020-04-02 11:21:22 +08:00
Lucian Copeland	2f764ded63	merge and docs	2020-04-01 13:52:53 -04:00
Lucian Copeland	a89928c13c	Implement requested changes	2020-04-01 13:02:05 -04:00
Scott Shawcroft	77562a2acd	Update the supported ports	2020-03-31 18:27:55 -07:00
Scott Shawcroft	75b7f583d2	Update LiteX APIs for new tick	2020-03-31 17:52:23 -07:00
Scott Shawcroft	1071924701	Fix thunderpack build	2020-03-31 17:05:37 -07:00
Scott Shawcroft	317b96e93a	Fix iMX builds	2020-03-31 17:00:30 -07:00
Scott Shawcroft	8fe512c7e9	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-03-31 15:13:58 -07:00
Scott Shawcroft	4b063aeb29	Hack up STM32 PulseIn so it builds	2020-03-31 15:12:11 -07:00
Scott Shawcroft	f47b964c5f	Merge pull request #2726 from xobs/fomu-circuitpython ports: litex: add port and fomu board	2020-03-31 13:51:09 -07:00
Scott Shawcroft	cbe9512691	Merge pull request #2741 from tannewt/fix_packetbuffer_server Fix PacketBuffer server support	2020-03-31 13:39:34 -07:00
Sean Cross	c69f7f8657	ports: litex: use dfu.py instead of dfu-suffix.py dfu.py now generates proper dfu suffixes without the nonstandard prefix. Signed-off-by: Sean Cross <sean@xobs.io>	2020-03-31 13:04:59 +08:00
Sean Cross	34ea140783	ports: fomu: build dfu as part of Makefile Now that we have a replacement for `dfu-suffix`, construct a dfu image rather than a UF2 image. Signed-off-by: Sean Cross <sean@xobs.io>	2020-03-31 11:42:55 +08:00
Sean Cross	065441e58c	ports: litex: enable itcm region for fomu This adds a new command line flag -DFOMU to indicate we're building for a Fomu board. Signed-off-by: Sean Cross <sean@xobs.io>	2020-03-31 09:40:38 +08:00
Sean Cross	786e79ebc9	ports: litex: add port and fomu board This adds support for Litex, along with support for the Fomu FPGA board. Signed-off-by: Sean Cross <sean@xobs.io>	2020-03-31 09:40:38 +08:00
Scott Shawcroft	e8cffcf978	Merge pull request #2740 from arturo182/mimxrt10xx_neopixel mimxrt10xx: Fix neopixel_write	2020-03-30 17:49:14 -07:00
arturo182	13022be299	mimxrt10xx: Fix neopixel_write	2020-03-31 01:05:03 +02:00
Brian Dean	7cfa8e1a68	board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.	2020-03-29 18:59:00 -04:00
Lucian Copeland	e2be069686	Support cached internal flash on the H743	2020-03-28 18:30:46 -04:00
Jeff Epler	54e8c63b4f	Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity Add polarity and phase to FourWire.	2020-03-28 07:28:37 -05:00
Scott Shawcroft	a4a458943d	Correct MIMXRT sdk version	2020-03-27 15:40:17 -07:00
Scott Shawcroft	798118b74f	Update board.c's to remove remaining tick.h	2020-03-27 14:52:35 -07:00
Scott Shawcroft	e4c4a4a3de	Swap to committed dependencies	2020-03-27 14:39:59 -07:00
Scott Shawcroft	b043384949	Update built in display init	2020-03-27 14:35:29 -07:00
Lucian Copeland	7995bcac40	Flash additions	2020-03-27 14:15:33 -04:00
Brian Dean	7fa38e8725	Update board name to bdmicro_vina_m0 to eliminate hyphens.	2020-03-27 13:37:59 -04:00
Brian Dean	14a1e5756e	Merge branch 'master' of https://github.com/adafruit/circuitpython	2020-03-26 20:28:54 -04:00
Brian Dean	2ae9edcbff	Add new board BDMICRO 'Vina M0'. ports/atmel-samd/boards/bdmicro_vina_m0/board.c ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk ports/atmel-samd/boards/bdmicro_vina_m0/board.c This board includes the newly added MX25L51245G 64MB SPI flash chip for the CircuitPython file system. Also included is the PCF2129T/2,518 high accuracy, battery backed, RTC. Also includes an independent USB HOST connector in addition to USB DEVICE making it easy to connect USB peripherals. Designed mainly as a general purpose module to piggy back onto application-specific boards, it can also run low power standalone in harsh environments for data logging and other control applications using an appropriate enclosure. Has been extensively tested with CircuitPython and works well.	2020-03-26 20:15:54 -04:00
Lucian Copeland	348df4be2b	Merge remote-tracking branch 'upstream/master' into stm32x7-setup	2020-03-26 18:16:11 -04:00
Lucian Copeland	c4db8b87e2	Add F7 and H7 Support to the STM32 port Restructures the STM port of Circuitpython to be more generic about the STM32 chip lines to support the F7 and H7 series of chips. Adds the new Packages directory to organize different chip layouts between lines. Makes general changes to the Makefile to condense board-level flags to the minimum and support the new chip series. Adds the new chip line to the Peripherals directory, along with new python tools used to generate peripheral text automatically in the tools/ directory.	2020-03-26 18:01:17 -04:00
Scott Shawcroft	aec3b2419b	Merge pull request #2733 from oshwabadge2020/change_backlight Add backlight polarity flag to Display	2020-03-26 14:00:47 -07:00
Scott Shawcroft	3959548054	Merge pull request #2734 from theacodes/add-flash-for-sol Add GD25Q64C as a flash chip for Sol	2020-03-26 13:27:56 -07:00
Thea Flowers	ff67571e9a	Add GD25Q64C as a flash chip for Sol	2020-03-26 12:33:27 -07:00
siddacious	9e0c00dfd4	adding a backlight polarity flag to Display	2020-03-25 22:51:20 -07:00
siddacious	7bba79363a	allowing backlight change	2020-03-25 22:41:23 -07:00
Scott Shawcroft	8a5d3cd6c4	Add exception on small buffer and fix Connecion WRITE handling	2020-03-25 17:41:47 -07:00
arturo182	18c12e7822	mimxrt10xx: Return proper UART read length when everything was read	2020-03-26 00:15:48 +01:00
Scott Shawcroft	3551b769a2	Fix connection handle tracking in PacketBuffer when a server.	2020-03-25 13:31:18 -07:00
Scott Shawcroft	59eb35da30	Merge pull request #2727 from burtyb/commander-1 Add support for Commander	2020-03-25 11:00:11 -07:00
Scott Shawcroft	ea0ce39962	Simplify STM a bit.	2020-03-24 15:49:24 -07:00
Scott Shawcroft	5e1e4d32db	Get basic sleep going on the iMX RT 1011	2020-03-24 15:46:10 -07:00
Chris Burton	5e559be9b5	Remove Adafruit_CircuitPython_CircuitPlayground	2020-03-24 21:10:34 +00:00
Scott Shawcroft	f414f2b588	Merge pull request #2723 from jgillick/jgillick/circuitpython/stm32f411 Add new STM board: Thunderpack	2020-03-24 12:27:20 -07:00
William Moser	c961ed9025	Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files	2020-03-24 13:25:02 -04:00
jgillick	8ed4deee9d	Rename pins	2020-03-23 23:06:55 -07:00
Scott Shawcroft	a8ed6d993c	Switch iMX RT to RTC. Untested.	2020-03-23 18:20:58 -07:00
Scott Shawcroft	653b7619ec	Add back microsecond delay to STM32	2020-03-23 16:09:50 -07:00
Scott Shawcroft	c0c4c4403a	Factor out stm32f4xx_hal_conf.h	2020-03-23 14:46:25 -07:00
jgillick	29ce756709	PR feedback.	2020-03-22 18:41:19 -07:00
jgillick	a79ac35173	Rename NVM_BYTEARRAY_BUFFER_SIZE	2020-03-22 15:20:58 -07:00
jgillick	68195a8dfe	Update NVM_BYTEARRAY_BUFFER_LEN	2020-03-22 15:19:53 -07:00
Chris Burton	39a19d54c2	Add support for Commander	2020-03-22 16:23:56 +00:00
jgillick	d76b76cb1d	Add non-volatile memory support to STM	2020-03-22 02:22:59 -07:00
jgillick	c62b724b24	Merge remote-tracking branch 'circuitpython/master' into jgillick/circuitpython/stm32f412c	2020-03-21 23:36:15 -07:00
Scott Shawcroft	2623022c84	Initial work for STM32. Need to fix us delay and PulseIn still.	2020-03-20 12:58:34 -07:00
jgillick	d9e491a9e8	Remove unnecessary change	2020-03-19 00:02:23 -07:00
jgillick	284073584a	Cleanup	2020-03-19 00:01:32 -07:00
jgillick	9be2ab6008	Change the board to use an STM32F411 chip.	2020-03-18 23:55:18 -07:00
Scott Shawcroft	5dc3a8960b	Merge pull request #2719 from theacodes/add-honking-button Add board support for Winterbloom Big Honking Button	2020-03-18 17:37:59 -07:00
Thea Flowers	e027aaf433	Remove some build options, fix order of boards in build.yml	2020-03-18 16:49:10 -07:00
Thea Flowers	7332adfa21	Add board support for Winterbloom Big Honking Button	2020-03-18 16:29:44 -07:00
jgillick	679314a22e	Fix disable VBUS sensing.	2020-03-18 00:35:20 -07:00
Scott Shawcroft	4603c6ddd7	Merge pull request #2711 from jepler/update-ulab update ulab	2020-03-17 15:33:08 -07:00
Scott Shawcroft	6db11cf68b	Fix up Spresense build. It doesn't sleep.	2020-03-17 14:21:45 -07:00
Scott Shawcroft	d9e68156b2	fix up SAMD21 sleep	2020-03-17 12:10:35 -07:00
Jeff Epler	d6342af980	ulab: rename enable macro so it appears in the support matrix	2020-03-17 09:33:03 -05:00
jgillick	24d1fd2bf1	PR Cleanup.	2020-03-17 00:48:19 -07:00
jgillick	d41ef45a9b	Update clock.	2020-03-17 00:36:18 -07:00
jgillick	cbc0e0344d	Revert changes to system_stm32f4xx.c	2020-03-17 00:36:12 -07:00
jgillick	07549b7fd9	Bring back trimmed spaces.	2020-03-17 00:27:04 -07:00
Scott Shawcroft	c8d9edd939	Merge pull request #2705 from NightSkySK/UARTlogger2 add UARTLogger2 board support for CircuitPython	2020-03-16 16:28:42 -07:00

... 12 13 14 15 16 ...

4179 Commits