nrf: bluetooth: add s140 v7.0.1
This is the first version with official support for nRF52833. Signed-off-by: Sean Cross <sean@xobs.io>
This commit is contained in:
Sean Cross
parent
51dbe9109f
commit
09bef7b0e1
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,678 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2020, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON BLE SoftDevice Common
|
||||
@{
|
||||
@defgroup ble_api Events, type definitions and API calls
|
||||
@{
|
||||
|
||||
@brief Module independent events, type definitions and API calls for the BLE SoftDevice.
|
||||
|
||||
*/
|
||||
|
||||
#ifndef BLE_H__
|
||||
#define BLE_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "ble_err.h"
|
||||
#include "ble_gap.h"
|
||||
#include "ble_l2cap.h"
|
||||
#include "ble_gatt.h"
|
||||
#include "ble_gattc.h"
|
||||
#include "ble_gatts.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_COMMON_ENUMERATIONS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief Common API SVC numbers.
|
||||
*/
|
||||
enum BLE_COMMON_SVCS
|
||||
{
|
||||
SD_BLE_ENABLE = BLE_SVC_BASE, /**< Enable and initialize the BLE stack */
|
||||
SD_BLE_EVT_GET, /**< Get an event from the pending events queue. */
|
||||
SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific base UUID. */
|
||||
SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */
|
||||
SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */
|
||||
SD_BLE_VERSION_GET, /**< Get the local version information (company ID, Link Layer Version, Link Layer Subversion). */
|
||||
SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */
|
||||
SD_BLE_OPT_SET, /**< Set a BLE option. */
|
||||
SD_BLE_OPT_GET, /**< Get a BLE option. */
|
||||
SD_BLE_CFG_SET, /**< Add a configuration to the BLE stack. */
|
||||
SD_BLE_UUID_VS_REMOVE, /**< Remove a Vendor Specific base UUID. */
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief BLE Module Independent Event IDs.
|
||||
*/
|
||||
enum BLE_COMMON_EVTS
|
||||
{
|
||||
BLE_EVT_USER_MEM_REQUEST = BLE_EVT_BASE + 0, /**< User Memory request. See @ref ble_evt_user_mem_request_t
|
||||
\n Reply with @ref sd_ble_user_mem_reply. */
|
||||
BLE_EVT_USER_MEM_RELEASE = BLE_EVT_BASE + 1, /**< User Memory release. See @ref ble_evt_user_mem_release_t */
|
||||
};
|
||||
|
||||
/**@brief BLE Connection Configuration IDs.
|
||||
*
|
||||
* IDs that uniquely identify a connection configuration.
|
||||
*/
|
||||
enum BLE_CONN_CFGS
|
||||
{
|
||||
BLE_CONN_CFG_GAP = BLE_CONN_CFG_BASE + 0, /**< BLE GAP specific connection configuration. */
|
||||
BLE_CONN_CFG_GATTC = BLE_CONN_CFG_BASE + 1, /**< BLE GATTC specific connection configuration. */
|
||||
BLE_CONN_CFG_GATTS = BLE_CONN_CFG_BASE + 2, /**< BLE GATTS specific connection configuration. */
|
||||
BLE_CONN_CFG_GATT = BLE_CONN_CFG_BASE + 3, /**< BLE GATT specific connection configuration. */
|
||||
BLE_CONN_CFG_L2CAP = BLE_CONN_CFG_BASE + 4, /**< BLE L2CAP specific connection configuration. */
|
||||
};
|
||||
|
||||
/**@brief BLE Common Configuration IDs.
|
||||
*
|
||||
* IDs that uniquely identify a common configuration.
|
||||
*/
|
||||
enum BLE_COMMON_CFGS
|
||||
{
|
||||
BLE_COMMON_CFG_VS_UUID = BLE_CFG_BASE, /**< Vendor specific base UUID configuration */
|
||||
};
|
||||
|
||||
/**@brief Common Option IDs.
|
||||
* IDs that uniquely identify a common option.
|
||||
*/
|
||||
enum BLE_COMMON_OPTS
|
||||
{
|
||||
BLE_COMMON_OPT_PA_LNA = BLE_OPT_BASE + 0, /**< PA and LNA options */
|
||||
BLE_COMMON_OPT_CONN_EVT_EXT = BLE_OPT_BASE + 1, /**< Extended connection events option */
|
||||
BLE_COMMON_OPT_EXTENDED_RC_CAL = BLE_OPT_BASE + 2, /**< Extended RC calibration option */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_COMMON_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @brief Required pointer alignment for BLE Events.
|
||||
*/
|
||||
#define BLE_EVT_PTR_ALIGNMENT 4
|
||||
|
||||
/** @brief Leaves the maximum of the two arguments.
|
||||
*/
|
||||
#define BLE_MAX(a, b) ((a) < (b) ? (b) : (a))
|
||||
|
||||
/** @brief Maximum possible length for BLE Events.
|
||||
* @note The highest value used for @ref ble_gatt_conn_cfg_t::att_mtu in any connection configuration shall be used as a parameter.
|
||||
* If that value has not been configured for any connections then @ref BLE_GATT_ATT_MTU_DEFAULT must be used instead.
|
||||
*/
|
||||
#define BLE_EVT_LEN_MAX(ATT_MTU) ( \
|
||||
offsetof(ble_evt_t, evt.gattc_evt.params.prim_srvc_disc_rsp.services) + ((ATT_MTU) - 1) / 4 * sizeof(ble_gattc_service_t) \
|
||||
)
|
||||
|
||||
/** @defgroup BLE_USER_MEM_TYPES User Memory Types
|
||||
* @{ */
|
||||
#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */
|
||||
#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_UUID_VS_COUNTS Vendor Specific base UUID counts
|
||||
* @{
|
||||
*/
|
||||
#define BLE_UUID_VS_COUNT_DEFAULT 10 /**< Default VS UUID count. */
|
||||
#define BLE_UUID_VS_COUNT_MAX 254 /**< Maximum VS UUID count. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_COMMON_CFG_DEFAULTS Configuration defaults.
|
||||
* @{
|
||||
*/
|
||||
#define BLE_CONN_CFG_TAG_DEFAULT 0 /**< Default configuration tag, SoftDevice default connection configuration. */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_COMMON_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**@brief User Memory Block. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t *p_mem; /**< Pointer to the start of the user memory block. */
|
||||
uint16_t len; /**< Length in bytes of the user memory block. */
|
||||
} ble_user_mem_block_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_EVT_USER_MEM_REQUEST. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
|
||||
} ble_evt_user_mem_request_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_EVT_USER_MEM_RELEASE. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
|
||||
ble_user_mem_block_t mem_block; /**< User memory block */
|
||||
} ble_evt_user_mem_release_t;
|
||||
|
||||
/**@brief Event structure for events not associated with a specific function module. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t conn_handle; /**< Connection Handle on which this event occurred. */
|
||||
union
|
||||
{
|
||||
ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */
|
||||
ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */
|
||||
} params; /**< Event parameter union. */
|
||||
} ble_common_evt_t;
|
||||
|
||||
/**@brief BLE Event header. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t evt_id; /**< Value from a BLE_<module>_EVT series. */
|
||||
uint16_t evt_len; /**< Length in octets including this header. */
|
||||
} ble_evt_hdr_t;
|
||||
|
||||
/**@brief Common BLE Event type, wrapping the module specific event reports. */
|
||||
typedef struct
|
||||
{
|
||||
ble_evt_hdr_t header; /**< Event header. */
|
||||
union
|
||||
{
|
||||
ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */
|
||||
ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */
|
||||
ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */
|
||||
ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */
|
||||
ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */
|
||||
} evt; /**< Event union. */
|
||||
} ble_evt_t;
|
||||
|
||||
|
||||
/**
|
||||
* @brief Version Information.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t version_number; /**< Link Layer Version number. See https://www.bluetooth.org/en-us/specification/assigned-numbers/link-layer for assigned values. */
|
||||
uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */
|
||||
uint16_t subversion_number; /**< Link Layer Sub Version number, corresponds to the SoftDevice Config ID or Firmware ID (FWID). */
|
||||
} ble_version_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration parameters for the PA and LNA.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t enable :1; /**< Enable toggling for this amplifier */
|
||||
uint8_t active_high :1; /**< Set the pin to be active high */
|
||||
uint8_t gpio_pin :6; /**< The GPIO pin to toggle for this amplifier */
|
||||
} ble_pa_lna_cfg_t;
|
||||
|
||||
/**
|
||||
* @brief PA & LNA GPIO toggle configuration
|
||||
*
|
||||
* This option configures the SoftDevice to toggle pins when the radio is active for use with a power amplifier and/or
|
||||
* a low noise amplifier.
|
||||
*
|
||||
* Toggling the pins is achieved by using two PPI channels and a GPIOTE channel. The hardware channel IDs are provided
|
||||
* by the application and should be regarded as reserved as long as any PA/LNA toggling is enabled.
|
||||
*
|
||||
* @note @ref sd_ble_opt_get is not supported for this option.
|
||||
* @note Setting this option while the radio is in use (i.e. any of the roles are active) may have undefined consequences
|
||||
* and must be avoided by the application.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
ble_pa_lna_cfg_t pa_cfg; /**< Power Amplifier configuration */
|
||||
ble_pa_lna_cfg_t lna_cfg; /**< Low Noise Amplifier configuration */
|
||||
|
||||
uint8_t ppi_ch_id_set; /**< PPI channel used for radio pin setting */
|
||||
uint8_t ppi_ch_id_clr; /**< PPI channel used for radio pin clearing */
|
||||
uint8_t gpiote_ch_id; /**< GPIOTE channel used for radio pin toggling */
|
||||
} ble_common_opt_pa_lna_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration of extended BLE connection events.
|
||||
*
|
||||
* When enabled the SoftDevice will dynamically extend the connection event when possible.
|
||||
*
|
||||
* The connection event length is controlled by the connection configuration as set by @ref ble_gap_conn_cfg_t::event_length.
|
||||
* The connection event can be extended if there is time to send another packet pair before the start of the next connection interval,
|
||||
* and if there are no conflicts with other BLE roles requesting radio time.
|
||||
*
|
||||
* @note @ref sd_ble_opt_get is not supported for this option.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t enable : 1; /**< Enable extended BLE connection events, disabled by default. */
|
||||
} ble_common_opt_conn_evt_ext_t;
|
||||
|
||||
/**
|
||||
* @brief Enable/disable extended RC calibration.
|
||||
*
|
||||
* If extended RC calibration is enabled and the internal RC oscillator (@ref NRF_CLOCK_LF_SRC_RC) is used as the SoftDevice
|
||||
* LFCLK source, the SoftDevice as a peripheral will by default try to increase the receive window if two consecutive packets
|
||||
* are not received. If it turns out that the packets were not received due to clock drift, the RC calibration is started.
|
||||
* This calibration comes in addition to the periodic calibration that is configured by @ref sd_softdevice_enable(). When
|
||||
* using only peripheral connections, the periodic calibration can therefore be configured with a much longer interval as the
|
||||
* peripheral will be able to detect and adjust automatically to clock drift, and calibrate on demand.
|
||||
*
|
||||
* If extended RC calibration is disabled and the internal RC oscillator is used as the SoftDevice LFCLK source, the
|
||||
* RC oscillator is calibrated periodically as configured by @ref sd_softdevice_enable().
|
||||
*
|
||||
* @note @ref sd_ble_opt_get is not supported for this option.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t enable : 1; /**< Enable extended RC calibration, enabled by default. */
|
||||
} ble_common_opt_extended_rc_cal_t;
|
||||
|
||||
/**@brief Option structure for common options. */
|
||||
typedef union
|
||||
{
|
||||
ble_common_opt_pa_lna_t pa_lna; /**< Parameters for controlling PA and LNA pin toggling. */
|
||||
ble_common_opt_conn_evt_ext_t conn_evt_ext; /**< Parameters for enabling extended connection events. */
|
||||
ble_common_opt_extended_rc_cal_t extended_rc_cal; /**< Parameters for enabling extended RC calibration. */
|
||||
} ble_common_opt_t;
|
||||
|
||||
/**@brief Common BLE Option type, wrapping the module specific options. */
|
||||
typedef union
|
||||
{
|
||||
ble_common_opt_t common_opt; /**< COMMON options, opt_id in @ref BLE_COMMON_OPTS series. */
|
||||
ble_gap_opt_t gap_opt; /**< GAP option, opt_id in @ref BLE_GAP_OPTS series. */
|
||||
} ble_opt_t;
|
||||
|
||||
/**@brief BLE connection configuration type, wrapping the module specific configurations, set with
|
||||
* @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @note Connection configurations don't have to be set.
|
||||
* In the case that no configurations has been set, or fewer connection configurations has been set than enabled connections,
|
||||
* the default connection configuration will be automatically added for the remaining connections.
|
||||
* When creating connections with the default configuration, @ref BLE_CONN_CFG_TAG_DEFAULT should be used in
|
||||
* place of @ref ble_conn_cfg_t::conn_cfg_tag.
|
||||
*
|
||||
* @sa sd_ble_gap_adv_start()
|
||||
* @sa sd_ble_gap_connect()
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_CONN_CFG}
|
||||
* @endmscs
|
||||
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t conn_cfg_tag; /**< The application chosen tag it can use with the
|
||||
@ref sd_ble_gap_adv_start() and @ref sd_ble_gap_connect() calls
|
||||
to select this configuration when creating a connection.
|
||||
Must be different for all connection configurations added and not @ref BLE_CONN_CFG_TAG_DEFAULT. */
|
||||
union {
|
||||
ble_gap_conn_cfg_t gap_conn_cfg; /**< GAP connection configuration, cfg_id is @ref BLE_CONN_CFG_GAP. */
|
||||
ble_gattc_conn_cfg_t gattc_conn_cfg; /**< GATTC connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTC. */
|
||||
ble_gatts_conn_cfg_t gatts_conn_cfg; /**< GATTS connection configuration, cfg_id is @ref BLE_CONN_CFG_GATTS. */
|
||||
ble_gatt_conn_cfg_t gatt_conn_cfg; /**< GATT connection configuration, cfg_id is @ref BLE_CONN_CFG_GATT. */
|
||||
ble_l2cap_conn_cfg_t l2cap_conn_cfg; /**< L2CAP connection configuration, cfg_id is @ref BLE_CONN_CFG_L2CAP. */
|
||||
} params; /**< Connection configuration union. */
|
||||
} ble_conn_cfg_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration of Vendor Specific base UUIDs, set with @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Too many UUIDs configured.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t vs_uuid_count; /**< Number of 128-bit Vendor Specific base UUID bases to allocate memory for.
|
||||
Default value is @ref BLE_UUID_VS_COUNT_DEFAULT. Maximum value is
|
||||
@ref BLE_UUID_VS_COUNT_MAX. */
|
||||
} ble_common_cfg_vs_uuid_t;
|
||||
|
||||
/**@brief Common BLE Configuration type, wrapping the common configurations. */
|
||||
typedef union
|
||||
{
|
||||
ble_common_cfg_vs_uuid_t vs_uuid_cfg; /**< Vendor Specific base UUID configuration, cfg_id is @ref BLE_COMMON_CFG_VS_UUID. */
|
||||
} ble_common_cfg_t;
|
||||
|
||||
/**@brief BLE Configuration type, wrapping the module specific configurations. */
|
||||
typedef union
|
||||
{
|
||||
ble_conn_cfg_t conn_cfg; /**< Connection specific configurations, cfg_id in @ref BLE_CONN_CFGS series. */
|
||||
ble_common_cfg_t common_cfg; /**< Global common configurations, cfg_id in @ref BLE_COMMON_CFGS series. */
|
||||
ble_gap_cfg_t gap_cfg; /**< Global GAP configurations, cfg_id in @ref BLE_GAP_CFGS series. */
|
||||
ble_gatts_cfg_t gatts_cfg; /**< Global GATTS configuration, cfg_id in @ref BLE_GATTS_CFGS series. */
|
||||
} ble_cfg_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_COMMON_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Enable the BLE stack
|
||||
*
|
||||
* @param[in, out] p_app_ram_base Pointer to a variable containing the start address of the
|
||||
* application RAM region (APP_RAM_BASE). On return, this will
|
||||
* contain the minimum start address of the application RAM region
|
||||
* required by the SoftDevice for this configuration.
|
||||
* @warning After this call, the SoftDevice may generate several events. The list of events provided
|
||||
* below require the application to initiate a SoftDevice API call. The corresponding API call
|
||||
* is referenced in the event documentation.
|
||||
* If the application fails to do so, the BLE connection may timeout, or the SoftDevice may stop
|
||||
* communicating with the peer device.
|
||||
* - @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST
|
||||
* - @ref BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST
|
||||
* - @ref BLE_GAP_EVT_PHY_UPDATE_REQUEST
|
||||
* - @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST
|
||||
* - @ref BLE_GAP_EVT_SEC_INFO_REQUEST
|
||||
* - @ref BLE_GAP_EVT_SEC_REQUEST
|
||||
* - @ref BLE_GAP_EVT_AUTH_KEY_REQUEST
|
||||
* - @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST
|
||||
* - @ref BLE_EVT_USER_MEM_REQUEST
|
||||
* - @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST
|
||||
*
|
||||
* @note The memory requirement for a specific configuration will not increase between SoftDevices
|
||||
* with the same major version number.
|
||||
*
|
||||
* @note At runtime the IC's RAM is split into 2 regions: The SoftDevice RAM region is located
|
||||
* between 0x20000000 and APP_RAM_BASE-1 and the application's RAM region is located between
|
||||
* APP_RAM_BASE and the start of the call stack.
|
||||
*
|
||||
* @details This call initializes the BLE stack, no BLE related function other than @ref
|
||||
* sd_ble_cfg_set can be called before this one.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_COMMON_ENABLE}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The BLE stack has been initialized successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized and cannot be reinitialized.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
|
||||
* @retval ::NRF_ERROR_NO_MEM One or more of the following is true:
|
||||
* - The amount of memory assigned to the SoftDevice by *p_app_ram_base is not
|
||||
* large enough to fit this configuration's memory requirement. Check *p_app_ram_base
|
||||
* and set the start address of the application RAM region accordingly.
|
||||
* - Dynamic part of the SoftDevice RAM region is larger then 64 kB which
|
||||
* is currently not supported.
|
||||
* @retval ::NRF_ERROR_RESOURCES The total number of L2CAP Channels configured using @ref sd_ble_cfg_set is too large.
|
||||
*/
|
||||
SVCALL(SD_BLE_ENABLE, uint32_t, sd_ble_enable(uint32_t * p_app_ram_base));
|
||||
|
||||
/**@brief Add configurations for the BLE stack
|
||||
*
|
||||
* @param[in] cfg_id Config ID, see @ref BLE_CONN_CFGS, @ref BLE_COMMON_CFGS, @ref
|
||||
* BLE_GAP_CFGS or @ref BLE_GATTS_CFGS.
|
||||
* @param[in] p_cfg Pointer to a ble_cfg_t structure containing the configuration value.
|
||||
* @param[in] app_ram_base The start address of the application RAM region (APP_RAM_BASE).
|
||||
* See @ref sd_ble_enable for details about APP_RAM_BASE.
|
||||
*
|
||||
* @note The memory requirement for a specific configuration will not increase between SoftDevices
|
||||
* with the same major version number.
|
||||
*
|
||||
* @note If a configuration is set more than once, the last one set is the one that takes effect on
|
||||
* @ref sd_ble_enable.
|
||||
*
|
||||
* @note Any part of the BLE stack that is NOT configured with @ref sd_ble_cfg_set will have default
|
||||
* configuration.
|
||||
*
|
||||
* @note @ref sd_ble_cfg_set may be called at any time when the SoftDevice is enabled (see @ref
|
||||
* sd_softdevice_enable) while the BLE part of the SoftDevice is not enabled (see @ref
|
||||
* sd_ble_enable).
|
||||
*
|
||||
* @note Error codes for the configurations are described in the configuration structs.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_COMMON_ENABLE}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The configuration has been added successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE The BLE stack had already been initialized.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid cfg_id supplied.
|
||||
* @retval ::NRF_ERROR_NO_MEM The amount of memory assigned to the SoftDevice by app_ram_base is not
|
||||
* large enough to fit this configuration's memory requirement.
|
||||
*/
|
||||
SVCALL(SD_BLE_CFG_SET, uint32_t, sd_ble_cfg_set(uint32_t cfg_id, ble_cfg_t const * p_cfg, uint32_t app_ram_base));
|
||||
|
||||
/**@brief Get an event from the pending events queue.
|
||||
*
|
||||
* @param[out] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length.
|
||||
* This buffer <b>must be aligned to the extend defined by @ref BLE_EVT_PTR_ALIGNMENT</b>.
|
||||
* The buffer should be interpreted as a @ref ble_evt_t struct.
|
||||
* @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length.
|
||||
*
|
||||
* @details This call allows the application to pull a BLE event from the BLE stack. The application is signaled that
|
||||
* an event is available from the BLE stack by the triggering of the SD_EVT_IRQn interrupt.
|
||||
* The application is free to choose whether to call this function from thread mode (main context) or directly from the
|
||||
* Interrupt Service Routine that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher
|
||||
* priority than the application, this function should be called in a loop (until @ref NRF_ERROR_NOT_FOUND is returned)
|
||||
* every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the BLE stack. Failure to do so
|
||||
* could potentially leave events in the internal queue without the application being aware of this fact.
|
||||
*
|
||||
* Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to
|
||||
* be copied into application memory. If the buffer provided is not large enough to fit the entire contents of the event,
|
||||
* @ref NRF_ERROR_DATA_SIZE will be returned and the application can then call again with a larger buffer size.
|
||||
* The maximum possible event length is defined by @ref BLE_EVT_LEN_MAX. The application may also "peek" the event length
|
||||
* by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return:
|
||||
*
|
||||
* \code
|
||||
* uint16_t len;
|
||||
* errcode = sd_ble_evt_get(NULL, &len);
|
||||
* \endcode
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_COMMON_IRQ_EVT_MSC}
|
||||
* @mmsc{@ref BLE_COMMON_THREAD_EVT_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Event pulled and stored into the supplied buffer.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND No events ready to be pulled.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer.
|
||||
*/
|
||||
SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t *p_dest, uint16_t *p_len));
|
||||
|
||||
|
||||
/**@brief Add a Vendor Specific base UUID.
|
||||
*
|
||||
* @details This call enables the application to add a Vendor Specific base UUID to the BLE stack's table, for later
|
||||
* use with all other modules and APIs. This then allows the application to use the shorter, 24-bit @ref ble_uuid_t
|
||||
* format when dealing with both 16-bit and 128-bit UUIDs without having to check for lengths and having split code
|
||||
* paths. This is accomplished by extending the grouping mechanism that the Bluetooth SIG standard base UUID uses
|
||||
* for all other 128-bit UUIDs. The type field in the @ref ble_uuid_t structure is an index (relative to
|
||||
* @ref BLE_UUID_TYPE_VENDOR_BEGIN) to the table populated by multiple calls to this function, and the UUID field
|
||||
* in the same structure contains the 2 bytes at indexes 12 and 13. The number of possible 128-bit UUIDs available to
|
||||
* the application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,
|
||||
* although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array.
|
||||
*
|
||||
* @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by
|
||||
* the 16-bit uuid field in @ref ble_uuid_t.
|
||||
*
|
||||
* @note If a UUID is already present in the BLE stack's internal table, the corresponding index will be returned in
|
||||
* p_uuid_type along with an @ref NRF_SUCCESS error code.
|
||||
*
|
||||
* @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific base UUID disregarding
|
||||
* bytes 12 and 13.
|
||||
* @param[out] p_uuid_type Pointer to a uint8_t where the type field in @ref ble_uuid_t corresponding to this UUID will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully added the Vendor Specific base UUID.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid.
|
||||
* @retval ::NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_vs_uuid, uint8_t *p_uuid_type));
|
||||
|
||||
|
||||
/**@brief Remove a Vendor Specific base UUID.
|
||||
*
|
||||
* @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows
|
||||
* the application to reuse memory allocated for Vendor Specific base UUIDs.
|
||||
*
|
||||
* @note Currently this function can only be called with a p_uuid_type set to @ref BLE_UUID_TYPE_UNKNOWN or the last added UUID type.
|
||||
*
|
||||
* @param[inout] p_uuid_type Pointer to a uint8_t where its value matches the UUID type in @ref ble_uuid_t::type to be removed.
|
||||
* If the type is set to @ref BLE_UUID_TYPE_UNKNOWN, or the pointer is NULL, the last Vendor Specific
|
||||
* base UUID will be removed. If the function returns successfully, the UUID type that was removed will
|
||||
* be written back to @p p_uuid_type. If function returns with a failure, it contains the last type that
|
||||
* is in use by the ATT Server.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully removed the Vendor Specific base UUID.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR If p_uuid_type is invalid.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM If p_uuid_type points to a non-valid UUID type.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN If the Vendor Specific base UUID is in use by the ATT Server.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_VS_REMOVE, uint32_t, sd_ble_uuid_vs_remove(uint8_t *p_uuid_type));
|
||||
|
||||
|
||||
/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure.
|
||||
*
|
||||
* @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared
|
||||
* to the corresponding ones in each entry of the table of Vendor Specific base UUIDs populated with @ref sd_ble_uuid_vs_add
|
||||
* to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index
|
||||
* relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type.
|
||||
*
|
||||
* @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE.
|
||||
*
|
||||
* @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes).
|
||||
* @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes.
|
||||
* @param[out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH Invalid UUID length.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const *p_uuid_le, ble_uuid_t *p_uuid));
|
||||
|
||||
|
||||
/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit).
|
||||
*
|
||||
* @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validity and size of p_uuid is computed.
|
||||
*
|
||||
* @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes.
|
||||
* @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes).
|
||||
* @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully encoded into the buffer.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid UUID type.
|
||||
*/
|
||||
SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const *p_uuid, uint8_t *p_uuid_le_len, uint8_t *p_uuid_le));
|
||||
|
||||
|
||||
/**@brief Get Version Information.
|
||||
*
|
||||
* @details This call allows the application to get the BLE stack version information.
|
||||
*
|
||||
* @param[out] p_version Pointer to a ble_version_t structure to be filled in.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Version information stored successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY The BLE stack is busy (typically doing a locally-initiated disconnection procedure).
|
||||
*/
|
||||
SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t *p_version));
|
||||
|
||||
|
||||
/**@brief Provide a user memory block.
|
||||
*
|
||||
* @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application.
|
||||
*
|
||||
* @param[in] conn_handle Connection handle.
|
||||
* @param[in] p_block Pointer to a user memory block structure or NULL if memory is managed by the application.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued a response to the peer.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH Invalid user memory block length supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection state or no user memory request pending.
|
||||
*/
|
||||
SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t const *p_block));
|
||||
|
||||
/**@brief Set a BLE option.
|
||||
*
|
||||
* @details This call allows the application to set the value of an option.
|
||||
*
|
||||
* @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS.
|
||||
* @param[in] p_opt Pointer to a ble_opt_t structure containing the option value.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Option set successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time.
|
||||
* @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed.
|
||||
*/
|
||||
SVCALL(SD_BLE_OPT_SET, uint32_t, sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt));
|
||||
|
||||
|
||||
/**@brief Get a BLE option.
|
||||
*
|
||||
* @details This call allows the application to retrieve the value of an option.
|
||||
*
|
||||
* @param[in] opt_id Option ID, see @ref BLE_COMMON_OPTS and @ref BLE_GAP_OPTS.
|
||||
* @param[out] p_opt Pointer to a ble_opt_t structure to be filled in.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Option retrieved successfully.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time.
|
||||
* @retval ::NRF_ERROR_BUSY The BLE stack is busy or the previous procedure has not completed.
|
||||
* @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported.
|
||||
*
|
||||
*/
|
||||
SVCALL(SD_BLE_OPT_GET, uint32_t, sd_ble_opt_get(uint32_t opt_id, ble_opt_t *p_opt));
|
||||
|
||||
/** @} */
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* BLE_H__ */
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,93 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2018, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON
|
||||
@{
|
||||
@addtogroup nrf_error
|
||||
@{
|
||||
@ingroup BLE_COMMON
|
||||
@}
|
||||
|
||||
@defgroup ble_err General error codes
|
||||
@{
|
||||
|
||||
@brief General error code definitions for the BLE API.
|
||||
|
||||
@ingroup BLE_COMMON
|
||||
*/
|
||||
#ifndef NRF_BLE_ERR_H__
|
||||
#define NRF_BLE_ERR_H__
|
||||
|
||||
#include "nrf_error.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* @defgroup BLE_ERRORS Error Codes
|
||||
* @{ */
|
||||
#define BLE_ERROR_NOT_ENABLED (NRF_ERROR_STK_BASE_NUM+0x001) /**< @ref sd_ble_enable has not been called. */
|
||||
#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid connection handle. */
|
||||
#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x003) /**< Invalid attribute handle. */
|
||||
#define BLE_ERROR_INVALID_ADV_HANDLE (NRF_ERROR_STK_BASE_NUM+0x004) /**< Invalid advertising handle. */
|
||||
#define BLE_ERROR_INVALID_ROLE (NRF_ERROR_STK_BASE_NUM+0x005) /**< Invalid role. */
|
||||
#define BLE_ERROR_BLOCKED_BY_OTHER_LINKS (NRF_ERROR_STK_BASE_NUM+0x006) /**< The attempt to change link settings failed due to the scheduling of other links. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges
|
||||
* @brief Assignment of subranges for module specific error codes.
|
||||
* @note For specific error codes, see ble_<module>.h or ble_error_<module>.h.
|
||||
* @{ */
|
||||
#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */
|
||||
#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */
|
||||
#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */
|
||||
#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
||||
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,229 @@
|
||||
/*
|
||||
* Copyright (c) 2013 - 2018, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_GATT Generic Attribute Profile (GATT) Common
|
||||
@{
|
||||
@brief Common definitions and prototypes for the GATT interfaces.
|
||||
*/
|
||||
|
||||
#ifndef BLE_GATT_H__
|
||||
#define BLE_GATT_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "ble_hci.h"
|
||||
#include "ble_ranges.h"
|
||||
#include "ble_types.h"
|
||||
#include "ble_err.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_GATT_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @brief Default ATT MTU, in bytes. */
|
||||
#define BLE_GATT_ATT_MTU_DEFAULT 23
|
||||
|
||||
/**@brief Invalid Attribute Handle. */
|
||||
#define BLE_GATT_HANDLE_INVALID 0x0000
|
||||
|
||||
/**@brief First Attribute Handle. */
|
||||
#define BLE_GATT_HANDLE_START 0x0001
|
||||
|
||||
/**@brief Last Attribute Handle. */
|
||||
#define BLE_GATT_HANDLE_END 0xFFFF
|
||||
|
||||
/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources
|
||||
* @{ */
|
||||
#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations
|
||||
* @{ */
|
||||
#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */
|
||||
#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */
|
||||
#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */
|
||||
#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
|
||||
#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
|
||||
#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags
|
||||
* @{ */
|
||||
#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00 /**< Cancel prepared write. */
|
||||
#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01 /**< Execute prepared write. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations
|
||||
* @{ */
|
||||
#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */
|
||||
#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */
|
||||
#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes
|
||||
* @{ */
|
||||
#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */
|
||||
#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */
|
||||
#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */
|
||||
#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */
|
||||
#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorization. */
|
||||
#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */
|
||||
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */
|
||||
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */
|
||||
#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */
|
||||
#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */
|
||||
#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Insufficient resources. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */
|
||||
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_WRITE_REQ_REJECTED 0x01FC /**< ATT Common Profile and Service Error: Write request rejected. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */
|
||||
#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats
|
||||
* @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
|
||||
* @{ */
|
||||
#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */
|
||||
#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */
|
||||
#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */
|
||||
#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */
|
||||
#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */
|
||||
#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */
|
||||
#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */
|
||||
#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */
|
||||
#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */
|
||||
#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */
|
||||
#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces
|
||||
* @{
|
||||
*/
|
||||
#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01 /**< Bluetooth SIG defined Namespace. */
|
||||
#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000 /**< Namespace Description Unknown. */
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATT_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief BLE GATT connection configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM att_mtu is smaller than @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint16_t att_mtu; /**< Maximum size of ATT packet the SoftDevice can send or receive.
|
||||
The default and minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
@mscs
|
||||
@mmsc{@ref BLE_GATTC_MTU_EXCHANGE}
|
||||
@mmsc{@ref BLE_GATTS_MTU_EXCHANGE}
|
||||
@endmscs
|
||||
*/
|
||||
} ble_gatt_conn_cfg_t;
|
||||
|
||||
/**@brief GATT Characteristic Properties. */
|
||||
typedef struct
|
||||
{
|
||||
/* Standard properties */
|
||||
uint8_t broadcast :1; /**< Broadcasting of the value permitted. */
|
||||
uint8_t read :1; /**< Reading the value permitted. */
|
||||
uint8_t write_wo_resp :1; /**< Writing the value with Write Command permitted. */
|
||||
uint8_t write :1; /**< Writing the value with Write Request permitted. */
|
||||
uint8_t notify :1; /**< Notification of the value permitted. */
|
||||
uint8_t indicate :1; /**< Indications of the value permitted. */
|
||||
uint8_t auth_signed_wr :1; /**< Writing the value with Signed Write Command permitted. */
|
||||
} ble_gatt_char_props_t;
|
||||
|
||||
/**@brief GATT Characteristic Extended Properties. */
|
||||
typedef struct
|
||||
{
|
||||
/* Extended properties */
|
||||
uint8_t reliable_wr :1; /**< Writing the value with Queued Write operations permitted. */
|
||||
uint8_t wr_aux :1; /**< Writing the Characteristic User Description descriptor permitted. */
|
||||
} ble_gatt_char_ext_props_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // BLE_GATT_H__
|
||||
|
||||
/** @} */
|
||||
@ -0,0 +1,715 @@
|
||||
/*
|
||||
* Copyright (c) 2011 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
|
||||
@{
|
||||
@brief Definitions and prototypes for the GATT Client interface.
|
||||
*/
|
||||
|
||||
#ifndef BLE_GATTC_H__
|
||||
#define BLE_GATTC_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf.h"
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "ble_ranges.h"
|
||||
#include "ble_types.h"
|
||||
#include "ble_err.h"
|
||||
#include "ble_gatt.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**@brief GATTC API SVC numbers. */
|
||||
enum BLE_GATTC_SVCS
|
||||
{
|
||||
SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
|
||||
SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */
|
||||
SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */
|
||||
SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */
|
||||
SD_BLE_GATTC_ATTR_INFO_DISCOVER, /**< Attribute Information Discovery. */
|
||||
SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */
|
||||
SD_BLE_GATTC_READ, /**< Generic read. */
|
||||
SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */
|
||||
SD_BLE_GATTC_WRITE, /**< Generic write. */
|
||||
SD_BLE_GATTC_HV_CONFIRM, /**< Handle Value Confirmation. */
|
||||
SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. */
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief GATT Client Event IDs.
|
||||
*/
|
||||
enum BLE_GATTC_EVTS
|
||||
{
|
||||
BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. \n See @ref ble_gattc_evt_prim_srvc_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. \n See @ref ble_gattc_evt_rel_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. \n See @ref ble_gattc_evt_char_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. \n See @ref ble_gattc_evt_desc_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, /**< Attribute Information Response event. \n See @ref ble_gattc_evt_attr_info_disc_rsp_t. */
|
||||
BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. \n See @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t. */
|
||||
BLE_GATTC_EVT_READ_RSP, /**< Read Response event. \n See @ref ble_gattc_evt_read_rsp_t. */
|
||||
BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. \n See @ref ble_gattc_evt_char_vals_read_rsp_t. */
|
||||
BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. \n See @ref ble_gattc_evt_write_rsp_t. */
|
||||
BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. \n Confirm indication with @ref sd_ble_gattc_hv_confirm. \n See @ref ble_gattc_evt_hvx_t. */
|
||||
BLE_GATTC_EVT_EXCHANGE_MTU_RSP, /**< Exchange MTU Response event. \n See @ref ble_gattc_evt_exchange_mtu_rsp_t. */
|
||||
BLE_GATTC_EVT_TIMEOUT, /**< Timeout event. \n See @ref ble_gattc_evt_timeout_t. */
|
||||
BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE /**< Write without Response transmission complete. \n See @ref ble_gattc_evt_write_cmd_tx_complete_t. */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTC_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
|
||||
* @{ */
|
||||
#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000) /**< Procedure not Permitted. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTC_ATTR_INFO_FORMAT Attribute Information Formats
|
||||
* @{ */
|
||||
#define BLE_GATTC_ATTR_INFO_FORMAT_16BIT 1 /**< 16-bit Attribute Information Format. */
|
||||
#define BLE_GATTC_ATTR_INFO_FORMAT_128BIT 2 /**< 128-bit Attribute Information Format. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTC_DEFAULTS GATT Client defaults
|
||||
* @{ */
|
||||
#define BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Write without Response that can be queued for transmission. */
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTC_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief BLE GATTC connection configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t write_cmd_tx_queue_size; /**< The guaranteed minimum number of Write without Response that can be queued for transmission.
|
||||
The default value is @ref BLE_GATTC_WRITE_CMD_TX_QUEUE_SIZE_DEFAULT */
|
||||
} ble_gattc_conn_cfg_t;
|
||||
|
||||
/**@brief Operation Handle Range. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t start_handle; /**< Start Handle. */
|
||||
uint16_t end_handle; /**< End Handle. */
|
||||
} ble_gattc_handle_range_t;
|
||||
|
||||
|
||||
/**@brief GATT service. */
|
||||
typedef struct
|
||||
{
|
||||
ble_uuid_t uuid; /**< Service UUID. */
|
||||
ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */
|
||||
} ble_gattc_service_t;
|
||||
|
||||
|
||||
/**@brief GATT include. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Include Handle. */
|
||||
ble_gattc_service_t included_srvc; /**< Handle of the included service. */
|
||||
} ble_gattc_include_t;
|
||||
|
||||
|
||||
/**@brief GATT characteristic. */
|
||||
typedef struct
|
||||
{
|
||||
ble_uuid_t uuid; /**< Characteristic UUID. */
|
||||
ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
|
||||
uint8_t char_ext_props : 1; /**< Extended properties present. */
|
||||
uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */
|
||||
uint16_t handle_value; /**< Handle of the Characteristic Value. */
|
||||
} ble_gattc_char_t;
|
||||
|
||||
|
||||
/**@brief GATT descriptor. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Descriptor Handle. */
|
||||
ble_uuid_t uuid; /**< Descriptor UUID. */
|
||||
} ble_gattc_desc_t;
|
||||
|
||||
|
||||
/**@brief Write Parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t write_op; /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */
|
||||
uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
|
||||
uint16_t handle; /**< Handle to the attribute to be written. */
|
||||
uint16_t offset; /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */
|
||||
uint16_t len; /**< Length of data in bytes. */
|
||||
uint8_t const *p_value; /**< Pointer to the value data. */
|
||||
} ble_gattc_write_params_t;
|
||||
|
||||
/**@brief Attribute Information for 16-bit Attribute UUID. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute handle. */
|
||||
ble_uuid_t uuid; /**< 16-bit Attribute UUID. */
|
||||
} ble_gattc_attr_info16_t;
|
||||
|
||||
/**@brief Attribute Information for 128-bit Attribute UUID. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute handle. */
|
||||
ble_uuid128_t uuid; /**< 128-bit Attribute UUID. */
|
||||
} ble_gattc_attr_info128_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Service count. */
|
||||
ble_gattc_service_t services[1]; /**< Service data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_prim_srvc_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_REL_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Include count. */
|
||||
ble_gattc_include_t includes[1]; /**< Include data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_rel_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Characteristic count. */
|
||||
ble_gattc_char_t chars[1]; /**< Characteristic data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_char_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_DESC_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Descriptor count. */
|
||||
ble_gattc_desc_t descs[1]; /**< Descriptor data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_desc_disc_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Attribute count. */
|
||||
uint8_t format; /**< Attribute information format, see @ref BLE_GATTC_ATTR_INFO_FORMAT. */
|
||||
union {
|
||||
ble_gattc_attr_info16_t attr_info16[1]; /**< Attribute information for 16-bit Attribute UUID.
|
||||
@note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
ble_gattc_attr_info128_t attr_info128[1]; /**< Attribute information for 128-bit Attribute UUID.
|
||||
@note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} info; /**< Attribute information union. */
|
||||
} ble_gattc_evt_attr_info_disc_rsp_t;
|
||||
|
||||
/**@brief GATT read by UUID handle value pair. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
uint8_t *p_value; /**< Pointer to the Attribute Value, length is available in @ref ble_gattc_evt_char_val_by_uuid_read_rsp_t::value_len. */
|
||||
} ble_gattc_handle_value_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t count; /**< Handle-Value Pair Count. */
|
||||
uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */
|
||||
uint8_t handle_value[1]; /**< Handle-Value(s) list. To iterate through the list use @ref sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter.
|
||||
@note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_char_val_by_uuid_read_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_READ_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
uint16_t offset; /**< Offset of the attribute data. */
|
||||
uint16_t len; /**< Attribute data length. */
|
||||
uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_read_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t len; /**< Concatenated Attribute values length. */
|
||||
uint8_t values[1]; /**< Attribute values. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_char_vals_read_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
|
||||
uint16_t offset; /**< Data offset. */
|
||||
uint16_t len; /**< Data length. */
|
||||
uint8_t data[1]; /**< Data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_write_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_HVX. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Handle to which the HVx operation applies. */
|
||||
uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
|
||||
uint16_t len; /**< Attribute data length. */
|
||||
uint8_t data[1]; /**< Attribute data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gattc_evt_hvx_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t server_rx_mtu; /**< Server RX MTU size. */
|
||||
} ble_gattc_evt_exchange_mtu_rsp_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_TIMEOUT. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
|
||||
} ble_gattc_evt_timeout_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t count; /**< Number of write without response transmissions completed. */
|
||||
} ble_gattc_evt_write_cmd_tx_complete_t;
|
||||
|
||||
/**@brief GATTC event structure. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t conn_handle; /**< Connection Handle on which event occurred. */
|
||||
uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
|
||||
uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases @ref BLE_GATT_HANDLE_INVALID. */
|
||||
union
|
||||
{
|
||||
ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */
|
||||
ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */
|
||||
ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */
|
||||
ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */
|
||||
ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */
|
||||
ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */
|
||||
ble_gattc_evt_exchange_mtu_rsp_t exchange_mtu_rsp; /**< Exchange MTU Response Event Parameters. */
|
||||
ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */
|
||||
ble_gattc_evt_attr_info_disc_rsp_t attr_info_disc_rsp; /**< Attribute Information Discovery Event Parameters. */
|
||||
ble_gattc_evt_write_cmd_tx_complete_t write_cmd_tx_complete; /**< Write without Response transmission complete Event Parameters. */
|
||||
} params; /**< Event Parameters. @note Only valid if @ref gatt_status == @ref BLE_GATT_STATUS_SUCCESS. */
|
||||
} ble_gattc_evt_t;
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTC_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
|
||||
*
|
||||
* @details This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle.
|
||||
* If the last service has not been reached, this function must be called again with an updated start handle value to continue the search.
|
||||
*
|
||||
* @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
|
||||
* type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_PRIM_SRVC_DISC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] start_handle Handle to start searching from.
|
||||
* @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid));
|
||||
|
||||
|
||||
/**@brief Initiate or continue a GATT Relationship Discovery procedure.
|
||||
*
|
||||
* @details This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached,
|
||||
* this must be called again with an updated handle range to continue the search.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_REL_DISC_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_REL_DISC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));
|
||||
|
||||
|
||||
/**@brief Initiate or continue a GATT Characteristic Discovery procedure.
|
||||
*
|
||||
* @details This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached,
|
||||
* this must be called again with an updated handle range to continue the discovery.
|
||||
*
|
||||
* @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
|
||||
* type @ref BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_CHAR_DISC_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_CHAR_DISC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));
|
||||
|
||||
|
||||
/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure.
|
||||
*
|
||||
* @details This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,
|
||||
* this must be called again with an updated handle range to continue the discovery.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_DESC_DISC_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_DESC_DISC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range));
|
||||
|
||||
|
||||
/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure.
|
||||
*
|
||||
* @details This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached,
|
||||
* this must be called again with an updated handle range to continue the discovery.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_READ_UUID_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_uuid Pointer to a Characteristic value UUID to read.
|
||||
* @param[in] p_handle_range A pointer to the range of handles to perform this procedure on.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const *p_uuid, ble_gattc_handle_range_t const *p_handle_range));
|
||||
|
||||
|
||||
/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.
|
||||
*
|
||||
* @details This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor
|
||||
* to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the
|
||||
* complete value.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_READ_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_VALUE_READ_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] handle The handle of the attribute to be read.
|
||||
* @param[in] offset Offset into the attribute value to be read.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset));
|
||||
|
||||
|
||||
/**@brief Initiate a GATT Read Multiple Characteristic Values procedure.
|
||||
*
|
||||
* @details This function initiates a GATT Read Multiple Characteristic Values procedure.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_CHAR_VALS_READ_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_READ_MULT_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read.
|
||||
* @param[in] handle_count The number of handles in p_handles.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count));
|
||||
|
||||
|
||||
/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.
|
||||
*
|
||||
* @details This function can perform all write procedures described in GATT.
|
||||
*
|
||||
* @note Only one write with response procedure can be ongoing per connection at a time.
|
||||
* If the application tries to write with response while another write with response procedure is ongoing,
|
||||
* the function call will return @ref NRF_ERROR_BUSY.
|
||||
* A @ref BLE_GATTC_EVT_WRITE_RSP event will be issued as soon as the write response arrives from the peer.
|
||||
*
|
||||
* @note The number of Write without Response that can be queued is configured by @ref ble_gattc_conn_cfg_t::write_cmd_tx_queue_size
|
||||
* When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES.
|
||||
* A @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event will be issued as soon as the transmission of the write without response is complete.
|
||||
*
|
||||
* @note The application can keep track of the available queue element count for writes without responses by following the procedure below:
|
||||
* - Store initial queue element count in a variable.
|
||||
* - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS.
|
||||
* - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE, Write without response transmission complete.}
|
||||
* @event{@ref BLE_GATTC_EVT_WRITE_RSP, Write response received from the peer.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_VALUE_WRITE_WITHOUT_RESP_MSC}
|
||||
* @mmsc{@ref BLE_GATTC_VALUE_WRITE_MSC}
|
||||
* @mmsc{@ref BLE_GATTC_VALUE_LONG_WRITE_MSC}
|
||||
* @mmsc{@ref BLE_GATTC_VALUE_RELIABLE_WRITE_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_write_params A pointer to a write parameters structure.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started the Write procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
|
||||
* @retval ::NRF_ERROR_BUSY For write with response, procedure already in progress. Wait for a @ref BLE_GATTC_EVT_WRITE_RSP event and retry.
|
||||
* @retval ::NRF_ERROR_RESOURCES Too many writes without responses queued.
|
||||
* Wait for a @ref BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE event and retry.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params));
|
||||
|
||||
|
||||
/**@brief Send a Handle Value Confirmation to the GATT Server.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_HVI_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] handle The handle of the attribute in the indication.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no Indication pending to be confirmed.
|
||||
* @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle));
|
||||
|
||||
/**@brief Discovers information about a range of attributes on a GATT server.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_ATTR_INFO_DISC_RSP, Generated when information about a range of attributes has been received.}
|
||||
* @endevents
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] p_handle_range The range of handles to request information about.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully started an attribute information discovery procedure.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid connection state
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_ATTR_INFO_DISCOVER, uint32_t, sd_ble_gattc_attr_info_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * p_handle_range));
|
||||
|
||||
/**@brief Start an ATT_MTU exchange by sending an Exchange MTU Request to the server.
|
||||
*
|
||||
* @details The SoftDevice sets ATT_MTU to the minimum of:
|
||||
* - The Client RX MTU value, and
|
||||
* - The Server RX MTU value from @ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP.
|
||||
*
|
||||
* However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTC_EVT_EXCHANGE_MTU_RSP}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTC_MTU_EXCHANGE}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] client_rx_mtu Client RX MTU size.
|
||||
* - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
* - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration
|
||||
used for this connection.
|
||||
* - The value must be equal to Server RX MTU size given in @ref sd_ble_gatts_exchange_mtu_reply
|
||||
* if an ATT_MTU exchange has already been performed in the other direction.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully sent request to the server.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid connection state or an ATT_MTU exchange was already requested once.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid Client RX MTU size supplied.
|
||||
* @retval ::NRF_ERROR_BUSY Client procedure already in progress.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTC_EXCHANGE_MTU_REQUEST, uint32_t, sd_ble_gattc_exchange_mtu_request(uint16_t conn_handle, uint16_t client_rx_mtu));
|
||||
|
||||
/**@brief Iterate through Handle-Value(s) list in @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event.
|
||||
*
|
||||
* @param[in] p_gattc_evt Pointer to event buffer containing @ref BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP event.
|
||||
* @note If the buffer contains different event, behavior is undefined.
|
||||
* @param[in,out] p_iter Iterator, points to @ref ble_gattc_handle_value_t structure that will be filled in with
|
||||
* the next Handle-Value pair in each iteration. If the function returns other than
|
||||
* @ref NRF_SUCCESS, it will not be changed.
|
||||
* - To start iteration, initialize the structure to zero.
|
||||
* - To continue, pass the value from previous iteration.
|
||||
*
|
||||
* \code
|
||||
* ble_gattc_handle_value_t iter;
|
||||
* memset(&iter, 0, sizeof(ble_gattc_handle_value_t));
|
||||
* while (sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(&ble_evt.evt.gattc_evt, &iter) == NRF_SUCCESS)
|
||||
* {
|
||||
* app_handle = iter.handle;
|
||||
* memcpy(app_value, iter.p_value, ble_evt.evt.gattc_evt.params.char_val_by_uuid_read_rsp.value_len);
|
||||
* }
|
||||
* \endcode
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully retrieved the next Handle-Value pair.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND No more Handle-Value pairs available in the list.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter);
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifndef SUPPRESS_INLINE_IMPLEMENTATION
|
||||
|
||||
__STATIC_INLINE uint32_t sd_ble_gattc_evt_char_val_by_uuid_read_rsp_iter(ble_gattc_evt_t *p_gattc_evt, ble_gattc_handle_value_t *p_iter)
|
||||
{
|
||||
uint32_t value_len = p_gattc_evt->params.char_val_by_uuid_read_rsp.value_len;
|
||||
uint8_t *p_first = p_gattc_evt->params.char_val_by_uuid_read_rsp.handle_value;
|
||||
uint8_t *p_next = p_iter->p_value ? p_iter->p_value + value_len : p_first;
|
||||
|
||||
if ((p_next - p_first) / (sizeof(uint16_t) + value_len) < p_gattc_evt->params.char_val_by_uuid_read_rsp.count)
|
||||
{
|
||||
p_iter->handle = (uint16_t)p_next[1] << 8 | p_next[0];
|
||||
p_iter->p_value = p_next + sizeof(uint16_t);
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
else
|
||||
{
|
||||
return NRF_ERROR_NOT_FOUND;
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* SUPPRESS_INLINE_IMPLEMENTATION */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* BLE_GATTC_H__ */
|
||||
|
||||
/**
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,845 @@
|
||||
/*
|
||||
* Copyright (c) 2011 - 2018, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server
|
||||
@{
|
||||
@brief Definitions and prototypes for the GATTS interface.
|
||||
*/
|
||||
|
||||
#ifndef BLE_GATTS_H__
|
||||
#define BLE_GATTS_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "ble_hci.h"
|
||||
#include "ble_ranges.h"
|
||||
#include "ble_types.h"
|
||||
#include "ble_err.h"
|
||||
#include "ble_gatt.h"
|
||||
#include "ble_gap.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief GATTS API SVC numbers.
|
||||
*/
|
||||
enum BLE_GATTS_SVCS
|
||||
{
|
||||
SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */
|
||||
SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */
|
||||
SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */
|
||||
SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */
|
||||
SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */
|
||||
SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */
|
||||
SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */
|
||||
SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */
|
||||
SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */
|
||||
SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */
|
||||
SD_BLE_GATTS_SYS_ATTR_GET, /**< Retrieve the persistent system attributes. */
|
||||
SD_BLE_GATTS_INITIAL_USER_HANDLE_GET, /**< Retrieve the first valid user handle. */
|
||||
SD_BLE_GATTS_ATTR_GET, /**< Retrieve the UUID and/or metadata of an attribute. */
|
||||
SD_BLE_GATTS_EXCHANGE_MTU_REPLY /**< Reply to Exchange MTU Request. */
|
||||
};
|
||||
|
||||
/**
|
||||
* @brief GATT Server Event IDs.
|
||||
*/
|
||||
enum BLE_GATTS_EVTS
|
||||
{
|
||||
BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. \n See @ref ble_gatts_evt_write_t. */
|
||||
BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. \n Reply with @ref sd_ble_gatts_rw_authorize_reply. \n See @ref ble_gatts_evt_rw_authorize_request_t. */
|
||||
BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending. \n Respond with @ref sd_ble_gatts_sys_attr_set. \n See @ref ble_gatts_evt_sys_attr_missing_t. */
|
||||
BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. \n See @ref ble_gatts_evt_hvc_t. */
|
||||
BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. \n No additional event structure applies. */
|
||||
BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, /**< Exchange MTU Request. \n Reply with @ref sd_ble_gatts_exchange_mtu_reply. \n See @ref ble_gatts_evt_exchange_mtu_request_t. */
|
||||
BLE_GATTS_EVT_TIMEOUT, /**< Peer failed to respond to an ATT request in time. \n See @ref ble_gatts_evt_timeout_t. */
|
||||
BLE_GATTS_EVT_HVN_TX_COMPLETE /**< Handle Value Notification transmission complete. \n See @ref ble_gatts_evt_hvn_tx_complete_t. */
|
||||
};
|
||||
|
||||
/**@brief GATTS Configuration IDs.
|
||||
*
|
||||
* IDs that uniquely identify a GATTS configuration.
|
||||
*/
|
||||
enum BLE_GATTS_CFGS
|
||||
{
|
||||
BLE_GATTS_CFG_SERVICE_CHANGED = BLE_GATTS_CFG_BASE, /**< Service changed configuration. */
|
||||
BLE_GATTS_CFG_ATTR_TAB_SIZE, /**< Attribute table size configuration. */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTS_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS
|
||||
* @{ */
|
||||
#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */
|
||||
#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths
|
||||
* @{ */
|
||||
#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */
|
||||
#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types
|
||||
* @{ */
|
||||
#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */
|
||||
#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */
|
||||
#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types
|
||||
* @{ */
|
||||
#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */
|
||||
#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */
|
||||
#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */
|
||||
#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */
|
||||
#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */
|
||||
#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */
|
||||
#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */
|
||||
#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_GATTS_OPS GATT Server Operations
|
||||
* @{ */
|
||||
#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */
|
||||
#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */
|
||||
#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */
|
||||
#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
|
||||
#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
|
||||
#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */
|
||||
#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_VLOCS GATT Value Locations
|
||||
* @{ */
|
||||
#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */
|
||||
#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */
|
||||
#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack
|
||||
will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types
|
||||
* @{ */
|
||||
#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */
|
||||
#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */
|
||||
#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_SYS_ATTR_FLAGS System Attribute Flags
|
||||
* @{ */
|
||||
#define BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS (1 << 0) /**< Restrict system attributes to system services only. */
|
||||
#define BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS (1 << 1) /**< Restrict system attributes to user services only. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_SERVICE_CHANGED Service Changed Inclusion Values
|
||||
* @{
|
||||
*/
|
||||
#define BLE_GATTS_SERVICE_CHANGED_DEFAULT (1) /**< Default is to include the Service Changed characteristic in the Attribute Table. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_ATTR_TAB_SIZE Attribute Table size
|
||||
* @{
|
||||
*/
|
||||
#define BLE_GATTS_ATTR_TAB_SIZE_MIN (248) /**< Minimum Attribute Table size */
|
||||
#define BLE_GATTS_ATTR_TAB_SIZE_DEFAULT (1408) /**< Default Attribute Table size. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_GATTS_DEFAULTS GATT Server defaults
|
||||
* @{
|
||||
*/
|
||||
#define BLE_GATTS_HVN_TX_QUEUE_SIZE_DEFAULT 1 /**< Default number of Handle Value Notifications that can be queued for transmission. */
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTS_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief BLE GATTS connection configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint8_t hvn_tx_queue_size; /**< Minimum guaranteed number of Handle Value Notifications that can be queued for transmission.
|
||||
The default value is @ref BLE_GATTS_HVN_TX_QUEUE_SIZE_DEFAULT */
|
||||
} ble_gatts_conn_cfg_t;
|
||||
|
||||
/**@brief Attribute metadata. */
|
||||
typedef struct
|
||||
{
|
||||
ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
|
||||
ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
|
||||
uint8_t vlen :1; /**< Variable length attribute. */
|
||||
uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/
|
||||
uint8_t rd_auth :1; /**< Read authorization and value will be requested from the application on every read operation. */
|
||||
uint8_t wr_auth :1; /**< Write authorization will be requested from the application on every Write Request operation (but not Write Command). */
|
||||
} ble_gatts_attr_md_t;
|
||||
|
||||
|
||||
/**@brief GATT Attribute. */
|
||||
typedef struct
|
||||
{
|
||||
ble_uuid_t const *p_uuid; /**< Pointer to the attribute UUID. */
|
||||
ble_gatts_attr_md_t const *p_attr_md; /**< Pointer to the attribute metadata structure. */
|
||||
uint16_t init_len; /**< Initial attribute value length in bytes. */
|
||||
uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */
|
||||
uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */
|
||||
uint8_t *p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer
|
||||
that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location.
|
||||
The stack may access that memory directly without the application's knowledge. For writable characteristics, this value must not be a location in flash memory.*/
|
||||
} ble_gatts_attr_t;
|
||||
|
||||
/**@brief GATT Attribute Value. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t len; /**< Length in bytes to be written or read. Length in bytes written or read after successful return.*/
|
||||
uint16_t offset; /**< Attribute value offset. */
|
||||
uint8_t *p_value; /**< Pointer to where value is stored or will be stored.
|
||||
If value is stored in user memory, only the attribute length is updated when p_value == NULL.
|
||||
Set to NULL when reading to obtain the complete length of the attribute value */
|
||||
} ble_gatts_value_t;
|
||||
|
||||
|
||||
/**@brief GATT Characteristic Presentation Format. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */
|
||||
int8_t exponent; /**< Exponent for integer data types. */
|
||||
uint16_t unit; /**< Unit from Bluetooth Assigned Numbers. */
|
||||
uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
|
||||
uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
|
||||
} ble_gatts_char_pf_t;
|
||||
|
||||
|
||||
/**@brief GATT Characteristic metadata. */
|
||||
typedef struct
|
||||
{
|
||||
ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
|
||||
ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */
|
||||
uint8_t const *p_char_user_desc; /**< Pointer to a UTF-8 encoded string (non-NULL terminated), NULL if the descriptor is not required. */
|
||||
uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */
|
||||
uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */
|
||||
ble_gatts_char_pf_t const *p_char_pf; /**< Pointer to a presentation format structure or NULL if the CPF descriptor is not required. */
|
||||
ble_gatts_attr_md_t const *p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */
|
||||
ble_gatts_attr_md_t const *p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */
|
||||
ble_gatts_attr_md_t const *p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */
|
||||
} ble_gatts_char_md_t;
|
||||
|
||||
|
||||
/**@brief GATT Characteristic Definition Handles. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t value_handle; /**< Handle to the characteristic value. */
|
||||
uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */
|
||||
uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */
|
||||
uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or @ref BLE_GATT_HANDLE_INVALID if not present. */
|
||||
} ble_gatts_char_handles_t;
|
||||
|
||||
|
||||
/**@brief GATT HVx parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Characteristic Value Handle. */
|
||||
uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
|
||||
uint16_t offset; /**< Offset within the attribute value. */
|
||||
uint16_t *p_len; /**< Length in bytes to be written, length in bytes written after return. */
|
||||
uint8_t const *p_data; /**< Actual data content, use NULL to use the current attribute value. */
|
||||
} ble_gatts_hvx_params_t;
|
||||
|
||||
/**@brief GATT Authorization parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
|
||||
uint8_t update : 1; /**< If set, data supplied in p_data will be used to update the attribute value.
|
||||
Please note that for @ref BLE_GATTS_AUTHORIZE_TYPE_WRITE operations this bit must always be set,
|
||||
as the data to be written needs to be stored and later provided by the application. */
|
||||
uint16_t offset; /**< Offset of the attribute value being updated. */
|
||||
uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */
|
||||
uint8_t const *p_data; /**< Pointer to new value used to update the attribute value. */
|
||||
} ble_gatts_authorize_params_t;
|
||||
|
||||
/**@brief GATT Read or Write Authorize Reply parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
|
||||
union {
|
||||
ble_gatts_authorize_params_t read; /**< Read authorization parameters. */
|
||||
ble_gatts_authorize_params_t write; /**< Write authorization parameters. */
|
||||
} params; /**< Reply Parameters. */
|
||||
} ble_gatts_rw_authorize_reply_params_t;
|
||||
|
||||
/**@brief Service Changed Inclusion configuration parameters, set with @ref sd_ble_cfg_set. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t service_changed : 1; /**< If 1, include the Service Changed characteristic in the Attribute Table. Default is @ref BLE_GATTS_SERVICE_CHANGED_DEFAULT. */
|
||||
} ble_gatts_cfg_service_changed_t;
|
||||
|
||||
/**@brief Attribute table size configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH One or more of the following is true:
|
||||
* - The specified Attribute Table size is too small.
|
||||
* The minimum acceptable size is defined by @ref BLE_GATTS_ATTR_TAB_SIZE_MIN.
|
||||
* - The specified Attribute Table size is not a multiple of 4.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t attr_tab_size; /**< Attribute table size. Default is @ref BLE_GATTS_ATTR_TAB_SIZE_DEFAULT, minimum is @ref BLE_GATTS_ATTR_TAB_SIZE_MIN. */
|
||||
} ble_gatts_cfg_attr_tab_size_t;
|
||||
|
||||
/**@brief Config structure for GATTS configurations. */
|
||||
typedef union
|
||||
{
|
||||
ble_gatts_cfg_service_changed_t service_changed; /**< Include service changed characteristic, cfg_id is @ref BLE_GATTS_CFG_SERVICE_CHANGED. */
|
||||
ble_gatts_cfg_attr_tab_size_t attr_tab_size; /**< Attribute table size, cfg_id is @ref BLE_GATTS_CFG_ATTR_TAB_SIZE. */
|
||||
} ble_gatts_cfg_t;
|
||||
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_WRITE. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
ble_uuid_t uuid; /**< Attribute UUID. */
|
||||
uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */
|
||||
uint8_t auth_required; /**< Writing operation deferred due to authorization requirement. Application may use @ref sd_ble_gatts_value_set to finalize the writing operation. */
|
||||
uint16_t offset; /**< Offset for the write operation. */
|
||||
uint16_t len; /**< Length of the received data. */
|
||||
uint8_t data[1]; /**< Received data. @note This is a variable length array. The size of 1 indicated is only a placeholder for compilation.
|
||||
See @ref sd_ble_evt_get for more information on how to use event structures with variable length array members. */
|
||||
} ble_gatts_evt_write_t;
|
||||
|
||||
/**@brief Event substructure for authorized read requests, see @ref ble_gatts_evt_rw_authorize_request_t. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
ble_uuid_t uuid; /**< Attribute UUID. */
|
||||
uint16_t offset; /**< Offset for the read operation. */
|
||||
} ble_gatts_evt_read_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
|
||||
union {
|
||||
ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */
|
||||
ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */
|
||||
} request; /**< Request Parameters. */
|
||||
} ble_gatts_evt_rw_authorize_request_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_SYS_ATTR_MISSING. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t hint; /**< Hint (currently unused). */
|
||||
} ble_gatts_evt_sys_attr_missing_t;
|
||||
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_HVC. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t handle; /**< Attribute Handle. */
|
||||
} ble_gatts_evt_hvc_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t client_rx_mtu; /**< Client RX MTU size. */
|
||||
} ble_gatts_evt_exchange_mtu_request_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_TIMEOUT. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
|
||||
} ble_gatts_evt_timeout_t;
|
||||
|
||||
/**@brief Event structure for @ref BLE_GATTS_EVT_HVN_TX_COMPLETE. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t count; /**< Number of notification transmissions completed. */
|
||||
} ble_gatts_evt_hvn_tx_complete_t;
|
||||
|
||||
/**@brief GATTS event structure. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t conn_handle; /**< Connection Handle on which the event occurred. */
|
||||
union
|
||||
{
|
||||
ble_gatts_evt_write_t write; /**< Write Event Parameters. */
|
||||
ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */
|
||||
ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */
|
||||
ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */
|
||||
ble_gatts_evt_exchange_mtu_request_t exchange_mtu_request; /**< Exchange MTU Request Event Parameters. */
|
||||
ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */
|
||||
ble_gatts_evt_hvn_tx_complete_t hvn_tx_complete; /**< Handle Value Notification transmission complete Event Parameters. */
|
||||
} params; /**< Event Parameters. */
|
||||
} ble_gatts_evt_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_GATTS_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Add a service declaration to the Attribute Table.
|
||||
*
|
||||
* @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to
|
||||
* add a secondary service declaration that is not referenced by another service later in the Attribute Table.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES.
|
||||
* @param[in] p_uuid Pointer to service UUID.
|
||||
* @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully added a service declaration.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
|
||||
* @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const *p_uuid, uint16_t *p_handle));
|
||||
|
||||
|
||||
/**@brief Add an include declaration to the Attribute Table.
|
||||
*
|
||||
* @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time).
|
||||
*
|
||||
* @note The included service must already be present in the Attribute Table prior to this call.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] service_handle Handle of the service where the included service is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
|
||||
* @param[in] inc_srvc_handle Handle of the included service.
|
||||
* @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully added an include declaration.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
|
||||
* @retval ::NRF_ERROR_NOT_SUPPORTED Feature is not supported, service_handle must be that of the last added service.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed.
|
||||
* @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND Attribute not found.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *p_include_handle));
|
||||
|
||||
|
||||
/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table.
|
||||
*
|
||||
* @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time).
|
||||
*
|
||||
* @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writable auxiliaries bits,
|
||||
* readable (no security) and writable (selectable) CCCDs and SCCDs and valid presentation format values.
|
||||
*
|
||||
* @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] service_handle Handle of the service where the characteristic is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
|
||||
* @param[in] p_char_md Characteristic metadata.
|
||||
* @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value.
|
||||
* @param[out] p_handles Pointer to the structure where the assigned handles will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully added a characteristic.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
|
||||
* @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const *p_char_md, ble_gatts_attr_t const *p_attr_char_value, ble_gatts_char_handles_t *p_handles));
|
||||
|
||||
|
||||
/**@brief Add a descriptor to the Attribute Table.
|
||||
*
|
||||
* @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time).
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_ATT_TABLE_POP_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if @ref BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
|
||||
* @param[in] p_attr Pointer to the attribute structure.
|
||||
* @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully added a descriptor.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
|
||||
* @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const *p_attr, uint16_t *p_handle));
|
||||
|
||||
/**@brief Set the value of a given attribute.
|
||||
*
|
||||
* @note Values other than system attributes can be set at any time, regardless of whether any active connections exist.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute.
|
||||
* @param[in] handle Attribute handle.
|
||||
* @param[in,out] p_value Attribute value information.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully set the value of the attribute.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND Attribute not found.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value));
|
||||
|
||||
/**@brief Get the value of a given attribute.
|
||||
*
|
||||
* @note If the attribute value is longer than the size of the supplied buffer,
|
||||
* @ref ble_gatts_value_t::len will return the total attribute value length (excluding offset),
|
||||
* and not the number of bytes actually returned in @ref ble_gatts_value_t::p_value.
|
||||
* The application may use this information to allocate a suitable buffer size.
|
||||
*
|
||||
* @note When retrieving system attribute values with this function, the connection handle
|
||||
* may refer to an already disconnected connection. Refer to the documentation of
|
||||
* @ref sd_ble_gatts_sys_attr_get for further information.
|
||||
*
|
||||
* @param[in] conn_handle Connection handle. Ignored if the value does not belong to a system attribute.
|
||||
* @param[in] handle Attribute handle.
|
||||
* @param[in,out] p_value Attribute value information.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully retrieved the value of the attribute.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND Attribute not found.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid attribute offset supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied on a system attribute.
|
||||
* @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value));
|
||||
|
||||
/**@brief Notify or Indicate an attribute value.
|
||||
*
|
||||
* @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation
|
||||
* (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that
|
||||
* the application can atomically perform a value update and a server initiated transaction with a single API call.
|
||||
*
|
||||
* @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution.
|
||||
* The Attribute Table has been updated if one of the following error codes is returned: @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY,
|
||||
* @ref NRF_ERROR_FORBIDDEN, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and @ref NRF_ERROR_RESOURCES.
|
||||
* The caller can check whether the value has been updated by looking at the contents of *(@ref ble_gatts_hvx_params_t::p_len).
|
||||
*
|
||||
* @note Only one indication procedure can be ongoing per connection at a time.
|
||||
* If the application tries to indicate an attribute value while another indication procedure is ongoing,
|
||||
* the function call will return @ref NRF_ERROR_BUSY.
|
||||
* A @ref BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from the peer.
|
||||
*
|
||||
* @note The number of Handle Value Notifications that can be queued is configured by @ref ble_gatts_conn_cfg_t::hvn_tx_queue_size
|
||||
* When the queue is full, the function call will return @ref NRF_ERROR_RESOURCES.
|
||||
* A @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event will be issued as soon as the transmission of the notification is complete.
|
||||
*
|
||||
* @note The application can keep track of the available queue element count for notifications by following the procedure below:
|
||||
* - Store initial queue element count in a variable.
|
||||
* - Decrement the variable, which stores the currently available queue element count, by one when a call to this function returns @ref NRF_SUCCESS.
|
||||
* - Increment the variable, which stores the current available queue element count, by the count variable in @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTS_EVT_HVN_TX_COMPLETE, Notification transmission complete.}
|
||||
* @event{@ref BLE_GATTS_EVT_HVC, Confirmation received from the peer.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_HVN_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_HVI_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_HVX_DISABLED_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection handle.
|
||||
* @param[in,out] p_hvx_params Pointer to an HVx parameters structure. If @ref ble_gatts_hvx_params_t::p_data
|
||||
* contains a non-NULL pointer the attribute value will be updated with the contents
|
||||
* pointed by it before sending the notification or indication. If the attribute value
|
||||
* is updated, @ref ble_gatts_hvx_params_t::p_len is updated by the SoftDevice to
|
||||
* contain the number of actual bytes written, else it will be set to 0.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true:
|
||||
* - Invalid Connection State
|
||||
* - Notifications and/or indications not enabled in the CCCD
|
||||
* - An ATT_MTU exchange is ongoing
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
|
||||
* @retval ::BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND Attribute not found.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN The connection's current security level is lower than the one required by the write permissions of the CCCD associated with this characteristic.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
|
||||
* @retval ::NRF_ERROR_BUSY For @ref BLE_GATT_HVX_INDICATION Procedure already in progress. Wait for a @ref BLE_GATTS_EVT_HVC event and retry.
|
||||
* @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
|
||||
* @retval ::NRF_ERROR_RESOURCES Too many notifications queued.
|
||||
* Wait for a @ref BLE_GATTS_EVT_HVN_TX_COMPLETE event and retry.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const *p_hvx_params));
|
||||
|
||||
/**@brief Indicate the Service Changed attribute value.
|
||||
*
|
||||
* @details This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute
|
||||
* Table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will
|
||||
* be issued.
|
||||
*
|
||||
* @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_GATTS_EVT_SC_CONFIRM, Confirmation of attribute table change received from peer.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_SC_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection handle.
|
||||
* @param[in] start_handle Start of affected attribute handle range.
|
||||
* @param[in] end_handle End of affected attribute handle range.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued the Service Changed indication for transmission.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_NOT_SUPPORTED Service Changed not enabled at initialization. See @ref
|
||||
* sd_ble_cfg_set and @ref ble_gatts_cfg_service_changed_t.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE One or more of the following is true:
|
||||
* - Invalid Connection State
|
||||
* - Notifications and/or indications not enabled in the CCCD
|
||||
* - An ATT_MTU exchange is ongoing
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
|
||||
* @retval ::NRF_ERROR_BUSY Procedure already in progress.
|
||||
* @retval ::BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle));
|
||||
|
||||
/**@brief Respond to a Read/Write authorization request.
|
||||
*
|
||||
* @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_READ_REQ_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_WRITE_REQ_AUTH_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_QUEUED_WRITE_PEER_CANCEL_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection handle.
|
||||
* @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application.
|
||||
*
|
||||
* @note @ref ble_gatts_authorize_params_t::p_data is ignored when this function is used to respond
|
||||
* to a @ref BLE_GATTS_AUTHORIZE_TYPE_READ event if @ref ble_gatts_authorize_params_t::update
|
||||
* is set to 0.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no authorization request pending.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Authorization op invalid,
|
||||
* handle supplied does not match requested handle,
|
||||
* or invalid data to be written provided by the application.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const *p_rw_authorize_reply_params));
|
||||
|
||||
|
||||
/**@brief Update persistent system attribute information.
|
||||
*
|
||||
* @details Supply information about persistent system attributes to the stack,
|
||||
* previously obtained using @ref sd_ble_gatts_sys_attr_get.
|
||||
* This call is only allowed for active connections, and is usually
|
||||
* made immediately after a connection is established with an known bonded device,
|
||||
* often as a response to a @ref BLE_GATTS_EVT_SYS_ATTR_MISSING.
|
||||
*
|
||||
* p_sysattrs may point directly to the application's stored copy of the system attributes
|
||||
* obtained using @ref sd_ble_gatts_sys_attr_get.
|
||||
* If the pointer is NULL, the system attribute info is initialized, assuming that
|
||||
* the application does not have any previously saved system attribute data for this device.
|
||||
*
|
||||
* @note The state of persistent system attributes is reset upon connection establishment and then remembered for its duration.
|
||||
*
|
||||
* @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially.
|
||||
* This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or
|
||||
* reset the SoftDevice to return to a known state.
|
||||
*
|
||||
* @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified.
|
||||
* @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC}
|
||||
* @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection handle.
|
||||
* @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL.
|
||||
* @param[in] len Size of data pointed by p_sys_attr_data, in octets.
|
||||
* @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully set the system attribute information.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get.
|
||||
* @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const *p_sys_attr_data, uint16_t len, uint32_t flags));
|
||||
|
||||
|
||||
/**@brief Retrieve persistent system attribute information from the stack.
|
||||
*
|
||||
* @details This call is used to retrieve information about values to be stored persistently by the application
|
||||
* during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device,
|
||||
* the system attribute information retrieved with this function should be restored using using @ref sd_ble_gatts_sys_attr_set.
|
||||
* If retrieved after disconnection, the data should be read before a new connection established. The connection handle for
|
||||
* the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it.
|
||||
* Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes
|
||||
* may be written to at any time by the peer during a connection's lifetime.
|
||||
*
|
||||
* @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned.
|
||||
* @note When the @ref BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection handle of the recently terminated connection.
|
||||
* @param[out] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. The format of the data is described
|
||||
* in @ref BLE_GATTS_SYS_ATTRS_FORMAT. NULL can be provided to obtain the length of the data.
|
||||
* @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditionally updated to actual length of system attribute data.
|
||||
* @param[in] flags Optional additional flags, see @ref BLE_GATTS_SYS_ATTR_FLAGS
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully retrieved the system attribute information.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid flags supplied.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND No system attributes found.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t *p_sys_attr_data, uint16_t *p_len, uint32_t flags));
|
||||
|
||||
|
||||
/**@brief Retrieve the first valid user attribute handle.
|
||||
*
|
||||
* @param[out] p_handle Pointer to an integer where the handle will be stored.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully retrieved the handle.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_INITIAL_USER_HANDLE_GET, uint32_t, sd_ble_gatts_initial_user_handle_get(uint16_t *p_handle));
|
||||
|
||||
/**@brief Retrieve the attribute UUID and/or metadata.
|
||||
*
|
||||
* @param[in] handle Attribute handle
|
||||
* @param[out] p_uuid UUID of the attribute. Use NULL to omit this field.
|
||||
* @param[out] p_md Metadata of the attribute. Use NULL to omit this field.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully retrieved the attribute metadata,
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters supplied. Returned when both @c p_uuid and @c p_md are NULL.
|
||||
* @retval ::NRF_ERROR_NOT_FOUND Attribute was not found.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_ATTR_GET, uint32_t, sd_ble_gatts_attr_get(uint16_t handle, ble_uuid_t * p_uuid, ble_gatts_attr_md_t * p_md));
|
||||
|
||||
/**@brief Reply to an ATT_MTU exchange request by sending an Exchange MTU Response to the client.
|
||||
*
|
||||
* @details This function is only used to reply to a @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST event.
|
||||
*
|
||||
* @details The SoftDevice sets ATT_MTU to the minimum of:
|
||||
* - The Client RX MTU value from @ref BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST, and
|
||||
* - The Server RX MTU value.
|
||||
*
|
||||
* However, the SoftDevice never sets ATT_MTU lower than @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_GATTS_MTU_EXCHANGE}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
|
||||
* @param[in] server_rx_mtu Server RX MTU size.
|
||||
* - The minimum value is @ref BLE_GATT_ATT_MTU_DEFAULT.
|
||||
* - The maximum value is @ref ble_gatt_conn_cfg_t::att_mtu in the connection configuration
|
||||
* used for this connection.
|
||||
* - The value must be equal to Client RX MTU size given in @ref sd_ble_gattc_exchange_mtu_request
|
||||
* if an ATT_MTU exchange has already been performed in the other direction.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully sent response to the client.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid Connection State or no ATT_MTU exchange request pending.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid Server RX MTU size supplied.
|
||||
* @retval ::NRF_ERROR_TIMEOUT There has been a GATT procedure timeout. No new GATT procedure can be performed without reestablishing the connection.
|
||||
*/
|
||||
SVCALL(SD_BLE_GATTS_EXCHANGE_MTU_REPLY, uint32_t, sd_ble_gatts_exchange_mtu_reply(uint16_t conn_handle, uint16_t server_rx_mtu));
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // BLE_GATTS_H__
|
||||
|
||||
/**
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,135 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON
|
||||
@{
|
||||
*/
|
||||
|
||||
|
||||
#ifndef BLE_HCI_H__
|
||||
#define BLE_HCI_H__
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
|
||||
* @{ */
|
||||
|
||||
#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 /**< Success. */
|
||||
#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 /**< Unknown BLE Command. */
|
||||
#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /**< Unknown Connection Identifier. */
|
||||
/*0x03 Hardware Failure
|
||||
0x04 Page Timeout
|
||||
*/
|
||||
#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 /**< Authentication Failure. */
|
||||
#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 /**< Pin or Key missing. */
|
||||
#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 /**< Memory Capacity Exceeded. */
|
||||
#define BLE_HCI_CONNECTION_TIMEOUT 0x08 /**< Connection Timeout. */
|
||||
/*0x09 Connection Limit Exceeded
|
||||
0x0A Synchronous Connection Limit To A Device Exceeded
|
||||
0x0B ACL Connection Already Exists*/
|
||||
#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /**< Command Disallowed. */
|
||||
/*0x0D Connection Rejected due to Limited Resources
|
||||
0x0E Connection Rejected Due To Security Reasons
|
||||
0x0F Connection Rejected due to Unacceptable BD_ADDR
|
||||
0x10 Connection Accept Timeout Exceeded
|
||||
0x11 Unsupported Feature or Parameter Value*/
|
||||
#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 /**< Invalid BLE Command Parameters. */
|
||||
#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 /**< Remote User Terminated Connection. */
|
||||
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 /**< Remote Device Terminated Connection due to low resources.*/
|
||||
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 /**< Remote Device Terminated Connection due to power off. */
|
||||
#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /**< Local Host Terminated Connection. */
|
||||
/*
|
||||
0x17 Repeated Attempts
|
||||
0x18 Pairing Not Allowed
|
||||
0x19 Unknown LMP PDU
|
||||
*/
|
||||
#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /**< Unsupported Remote Feature. */
|
||||
/*
|
||||
0x1B SCO Offset Rejected
|
||||
0x1C SCO Interval Rejected
|
||||
0x1D SCO Air Mode Rejected*/
|
||||
#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E /**< Invalid LMP Parameters. */
|
||||
#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /**< Unspecified Error. */
|
||||
/*0x20 Unsupported LMP Parameter Value
|
||||
0x21 Role Change Not Allowed
|
||||
*/
|
||||
#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /**< LMP Response Timeout. */
|
||||
#define BLE_HCI_STATUS_CODE_LMP_ERROR_TRANSACTION_COLLISION 0x23 /**< LMP Error Transaction Collision/LL Procedure Collision. */
|
||||
#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /**< LMP PDU Not Allowed. */
|
||||
/*0x25 Encryption Mode Not Acceptable
|
||||
0x26 Link Key Can Not be Changed
|
||||
0x27 Requested QoS Not Supported
|
||||
*/
|
||||
#define BLE_HCI_INSTANT_PASSED 0x28 /**< Instant Passed. */
|
||||
#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 /**< Pairing with Unit Key Unsupported. */
|
||||
#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /**< Different Transaction Collision. */
|
||||
/*
|
||||
0x2B Reserved
|
||||
0x2C QoS Unacceptable Parameter
|
||||
0x2D QoS Rejected
|
||||
0x2E Channel Classification Not Supported
|
||||
0x2F Insufficient Security
|
||||
*/
|
||||
#define BLE_HCI_PARAMETER_OUT_OF_MANDATORY_RANGE 0x30 /**< Parameter Out Of Mandatory Range. */
|
||||
/*
|
||||
0x31 Reserved
|
||||
0x32 Role Switch Pending
|
||||
0x33 Reserved
|
||||
0x34 Reserved Slot Violation
|
||||
0x35 Role Switch Failed
|
||||
0x36 Extended Inquiry Response Too Large
|
||||
0x37 Secure Simple Pairing Not Supported By Host.
|
||||
0x38 Host Busy - Pairing
|
||||
0x39 Connection Rejected due to No Suitable Channel Found*/
|
||||
#define BLE_HCI_CONTROLLER_BUSY 0x3A /**< Controller Busy. */
|
||||
#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B /**< Connection Interval Unacceptable. */
|
||||
#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C /**< Directed Advertisement Timeout. */
|
||||
#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D /**< Connection Terminated due to MIC Failure. */
|
||||
#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /**< Connection Failed to be Established. */
|
||||
|
||||
/** @} */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // BLE_HCI_H__
|
||||
|
||||
/** @} */
|
||||
@ -0,0 +1,507 @@
|
||||
/*
|
||||
* Copyright (c) 2011 - 2020, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
|
||||
@{
|
||||
@brief Definitions and prototypes for the L2CAP interface.
|
||||
*/
|
||||
|
||||
#ifndef BLE_L2CAP_H__
|
||||
#define BLE_L2CAP_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "ble_ranges.h"
|
||||
#include "ble_types.h"
|
||||
#include "ble_err.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**@addtogroup BLE_L2CAP_TERMINOLOGY Terminology
|
||||
* @{
|
||||
* @details
|
||||
*
|
||||
* L2CAP SDU
|
||||
* - A data unit that the application can send/receive to/from a peer.
|
||||
*
|
||||
* L2CAP PDU
|
||||
* - A data unit that is exchanged between local and remote L2CAP entities.
|
||||
* It consists of L2CAP protocol control information and payload fields.
|
||||
* The payload field can contain an L2CAP SDU or a part of an L2CAP SDU.
|
||||
*
|
||||
* L2CAP MTU
|
||||
* - The maximum length of an L2CAP SDU.
|
||||
*
|
||||
* L2CAP MPS
|
||||
* - The maximum length of an L2CAP PDU payload field.
|
||||
*
|
||||
* Credits
|
||||
* - A value indicating the number of L2CAP PDUs that the receiver of the credit can send to the peer.
|
||||
* @} */
|
||||
|
||||
/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**@brief L2CAP API SVC numbers. */
|
||||
enum BLE_L2CAP_SVCS
|
||||
{
|
||||
SD_BLE_L2CAP_CH_SETUP = BLE_L2CAP_SVC_BASE + 0, /**< Set up an L2CAP channel. */
|
||||
SD_BLE_L2CAP_CH_RELEASE = BLE_L2CAP_SVC_BASE + 1, /**< Release an L2CAP channel. */
|
||||
SD_BLE_L2CAP_CH_RX = BLE_L2CAP_SVC_BASE + 2, /**< Receive an SDU on an L2CAP channel. */
|
||||
SD_BLE_L2CAP_CH_TX = BLE_L2CAP_SVC_BASE + 3, /**< Transmit an SDU on an L2CAP channel. */
|
||||
SD_BLE_L2CAP_CH_FLOW_CONTROL = BLE_L2CAP_SVC_BASE + 4, /**< Advanced SDU reception flow control. */
|
||||
};
|
||||
|
||||
/**@brief L2CAP Event IDs. */
|
||||
enum BLE_L2CAP_EVTS
|
||||
{
|
||||
BLE_L2CAP_EVT_CH_SETUP_REQUEST = BLE_L2CAP_EVT_BASE + 0, /**< L2CAP Channel Setup Request event.
|
||||
\n Reply with @ref sd_ble_l2cap_ch_setup.
|
||||
\n See @ref ble_l2cap_evt_ch_setup_request_t. */
|
||||
BLE_L2CAP_EVT_CH_SETUP_REFUSED = BLE_L2CAP_EVT_BASE + 1, /**< L2CAP Channel Setup Refused event.
|
||||
\n See @ref ble_l2cap_evt_ch_setup_refused_t. */
|
||||
BLE_L2CAP_EVT_CH_SETUP = BLE_L2CAP_EVT_BASE + 2, /**< L2CAP Channel Setup Completed event.
|
||||
\n See @ref ble_l2cap_evt_ch_setup_t. */
|
||||
BLE_L2CAP_EVT_CH_RELEASED = BLE_L2CAP_EVT_BASE + 3, /**< L2CAP Channel Released event.
|
||||
\n No additional event structure applies. */
|
||||
BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED = BLE_L2CAP_EVT_BASE + 4, /**< L2CAP Channel SDU data buffer released event.
|
||||
\n See @ref ble_l2cap_evt_ch_sdu_buf_released_t. */
|
||||
BLE_L2CAP_EVT_CH_CREDIT = BLE_L2CAP_EVT_BASE + 5, /**< L2CAP Channel Credit received.
|
||||
\n See @ref ble_l2cap_evt_ch_credit_t. */
|
||||
BLE_L2CAP_EVT_CH_RX = BLE_L2CAP_EVT_BASE + 6, /**< L2CAP Channel SDU received.
|
||||
\n See @ref ble_l2cap_evt_ch_rx_t. */
|
||||
BLE_L2CAP_EVT_CH_TX = BLE_L2CAP_EVT_BASE + 7, /**< L2CAP Channel SDU transmitted.
|
||||
\n See @ref ble_l2cap_evt_ch_tx_t. */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/**@addtogroup BLE_L2CAP_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/**@brief Maximum number of L2CAP channels per connection. */
|
||||
#define BLE_L2CAP_CH_COUNT_MAX (64)
|
||||
|
||||
/**@brief Minimum L2CAP MTU, in bytes. */
|
||||
#define BLE_L2CAP_MTU_MIN (23)
|
||||
|
||||
/**@brief Minimum L2CAP MPS, in bytes. */
|
||||
#define BLE_L2CAP_MPS_MIN (23)
|
||||
|
||||
/**@brief Invalid CID. */
|
||||
#define BLE_L2CAP_CID_INVALID (0x0000)
|
||||
|
||||
/**@brief Default number of credits for @ref sd_ble_l2cap_ch_flow_control. */
|
||||
#define BLE_L2CAP_CREDITS_DEFAULT (1)
|
||||
|
||||
/**@defgroup BLE_L2CAP_CH_SETUP_REFUSED_SRCS L2CAP channel setup refused sources
|
||||
* @{ */
|
||||
#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_LOCAL (0x01) /**< Local. */
|
||||
#define BLE_L2CAP_CH_SETUP_REFUSED_SRC_REMOTE (0x02) /**< Remote. */
|
||||
/** @} */
|
||||
|
||||
/** @defgroup BLE_L2CAP_CH_STATUS_CODES L2CAP channel status codes
|
||||
* @{ */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_SUCCESS (0x0000) /**< Success. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_LE_PSM_NOT_SUPPORTED (0x0002) /**< LE_PSM not supported. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_NO_RESOURCES (0x0004) /**< No resources available. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHENTICATION (0x0005) /**< Insufficient authentication. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_AUTHORIZATION (0x0006) /**< Insufficient authorization. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC_KEY_SIZE (0x0007) /**< Insufficient encryption key size. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_INSUFF_ENC (0x0008) /**< Insufficient encryption. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_INVALID_SCID (0x0009) /**< Invalid Source CID. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_SCID_ALLOCATED (0x000A) /**< Source CID already allocated. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_UNACCEPTABLE_PARAMS (0x000B) /**< Unacceptable parameters. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_NOT_UNDERSTOOD (0x8000) /**< Command Reject received instead of LE Credit Based Connection Response. */
|
||||
#define BLE_L2CAP_CH_STATUS_CODE_TIMEOUT (0xC000) /**< Operation timed out. */
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/**@addtogroup BLE_L2CAP_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/**
|
||||
* @brief BLE L2CAP connection configuration parameters, set with @ref sd_ble_cfg_set.
|
||||
*
|
||||
* @note These parameters are set per connection, so all L2CAP channels created on this connection
|
||||
* will have the same parameters.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM One or more of the following is true:
|
||||
* - rx_mps is smaller than @ref BLE_L2CAP_MPS_MIN.
|
||||
* - tx_mps is smaller than @ref BLE_L2CAP_MPS_MIN.
|
||||
* - ch_count is greater than @ref BLE_L2CAP_CH_COUNT_MAX.
|
||||
* @retval ::NRF_ERROR_NO_MEM rx_mps or tx_mps is set too high.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall
|
||||
be able to receive on L2CAP channels on connections with this
|
||||
configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */
|
||||
uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall
|
||||
be able to transmit on L2CAP channels on connections with this
|
||||
configuration. The minimum value is @ref BLE_L2CAP_MPS_MIN. */
|
||||
uint8_t rx_queue_size; /**< Number of SDU data buffers that can be queued for reception per
|
||||
L2CAP channel. The minimum value is one. */
|
||||
uint8_t tx_queue_size; /**< Number of SDU data buffers that can be queued for transmission
|
||||
per L2CAP channel. The minimum value is one. */
|
||||
uint8_t ch_count; /**< Number of L2CAP channels the application can create per connection
|
||||
with this configuration. The default value is zero, the maximum
|
||||
value is @ref BLE_L2CAP_CH_COUNT_MAX.
|
||||
@note if this parameter is set to zero, all other parameters in
|
||||
@ref ble_l2cap_conn_cfg_t are ignored. */
|
||||
} ble_l2cap_conn_cfg_t;
|
||||
|
||||
/**@brief L2CAP channel RX parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t rx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP shall be able to
|
||||
receive on this L2CAP channel.
|
||||
- Must be equal to or greater than @ref BLE_L2CAP_MTU_MIN. */
|
||||
uint16_t rx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP shall be
|
||||
able to receive on this L2CAP channel.
|
||||
- Must be equal to or greater than @ref BLE_L2CAP_MPS_MIN.
|
||||
- Must be equal to or less than @ref ble_l2cap_conn_cfg_t::rx_mps. */
|
||||
ble_data_t sdu_buf; /**< SDU data buffer for reception.
|
||||
- If @ref ble_data_t::p_data is non-NULL, initial credits are
|
||||
issued to the peer.
|
||||
- If @ref ble_data_t::p_data is NULL, no initial credits are
|
||||
issued to the peer. */
|
||||
} ble_l2cap_ch_rx_params_t;
|
||||
|
||||
/**@brief L2CAP channel setup parameters. */
|
||||
typedef struct
|
||||
{
|
||||
ble_l2cap_ch_rx_params_t rx_params; /**< L2CAP channel RX parameters. */
|
||||
uint16_t le_psm; /**< LE Protocol/Service Multiplexer. Used when requesting
|
||||
setup of an L2CAP channel, ignored otherwise. */
|
||||
uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES.
|
||||
Used when replying to a setup request of an L2CAP
|
||||
channel, ignored otherwise. */
|
||||
} ble_l2cap_ch_setup_params_t;
|
||||
|
||||
/**@brief L2CAP channel TX parameters. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t tx_mtu; /**< The maximum L2CAP SDU size, in bytes, that L2CAP is able to
|
||||
transmit on this L2CAP channel. */
|
||||
uint16_t peer_mps; /**< The maximum L2CAP PDU payload size, in bytes, that the peer is
|
||||
able to receive on this L2CAP channel. */
|
||||
uint16_t tx_mps; /**< The maximum L2CAP PDU payload size, in bytes, that L2CAP is able
|
||||
to transmit on this L2CAP channel. This is effective tx_mps,
|
||||
selected by the SoftDevice as
|
||||
MIN( @ref ble_l2cap_ch_tx_params_t::peer_mps, @ref ble_l2cap_conn_cfg_t::tx_mps ) */
|
||||
uint16_t credits; /**< Initial credits given by the peer. */
|
||||
} ble_l2cap_ch_tx_params_t;
|
||||
|
||||
/**@brief L2CAP Channel Setup Request event. */
|
||||
typedef struct
|
||||
{
|
||||
ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */
|
||||
uint16_t le_psm; /**< LE Protocol/Service Multiplexer. */
|
||||
} ble_l2cap_evt_ch_setup_request_t;
|
||||
|
||||
/**@brief L2CAP Channel Setup Refused event. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t source; /**< Source, see @ref BLE_L2CAP_CH_SETUP_REFUSED_SRCS */
|
||||
uint16_t status; /**< Status code, see @ref BLE_L2CAP_CH_STATUS_CODES */
|
||||
} ble_l2cap_evt_ch_setup_refused_t;
|
||||
|
||||
/**@brief L2CAP Channel Setup Completed event. */
|
||||
typedef struct
|
||||
{
|
||||
ble_l2cap_ch_tx_params_t tx_params; /**< L2CAP channel TX parameters. */
|
||||
} ble_l2cap_evt_ch_setup_t;
|
||||
|
||||
/**@brief L2CAP Channel SDU Data Buffer Released event. */
|
||||
typedef struct
|
||||
{
|
||||
ble_data_t sdu_buf; /**< Returned reception or transmission SDU data buffer. The SoftDevice
|
||||
returns SDU data buffers supplied by the application, which have
|
||||
not yet been returned previously via a @ref BLE_L2CAP_EVT_CH_RX or
|
||||
@ref BLE_L2CAP_EVT_CH_TX event. */
|
||||
} ble_l2cap_evt_ch_sdu_buf_released_t;
|
||||
|
||||
/**@brief L2CAP Channel Credit received event. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t credits; /**< Additional credits given by the peer. */
|
||||
} ble_l2cap_evt_ch_credit_t;
|
||||
|
||||
/**@brief L2CAP Channel received SDU event. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t sdu_len; /**< Total SDU length, in bytes. */
|
||||
ble_data_t sdu_buf; /**< SDU data buffer.
|
||||
@note If there is not enough space in the buffer
|
||||
(sdu_buf.len < sdu_len) then the rest of the SDU will be
|
||||
silently discarded by the SoftDevice. */
|
||||
} ble_l2cap_evt_ch_rx_t;
|
||||
|
||||
/**@brief L2CAP Channel transmitted SDU event. */
|
||||
typedef struct
|
||||
{
|
||||
ble_data_t sdu_buf; /**< SDU data buffer. */
|
||||
} ble_l2cap_evt_ch_tx_t;
|
||||
|
||||
/**@brief L2CAP event structure. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t conn_handle; /**< Connection Handle on which the event occured. */
|
||||
uint16_t local_cid; /**< Local Channel ID of the L2CAP channel, or
|
||||
@ref BLE_L2CAP_CID_INVALID if not present. */
|
||||
union
|
||||
{
|
||||
ble_l2cap_evt_ch_setup_request_t ch_setup_request; /**< L2CAP Channel Setup Request Event Parameters. */
|
||||
ble_l2cap_evt_ch_setup_refused_t ch_setup_refused; /**< L2CAP Channel Setup Refused Event Parameters. */
|
||||
ble_l2cap_evt_ch_setup_t ch_setup; /**< L2CAP Channel Setup Completed Event Parameters. */
|
||||
ble_l2cap_evt_ch_sdu_buf_released_t ch_sdu_buf_released;/**< L2CAP Channel SDU Data Buffer Released Event Parameters. */
|
||||
ble_l2cap_evt_ch_credit_t credit; /**< L2CAP Channel Credit Received Event Parameters. */
|
||||
ble_l2cap_evt_ch_rx_t rx; /**< L2CAP Channel SDU Received Event Parameters. */
|
||||
ble_l2cap_evt_ch_tx_t tx; /**< L2CAP Channel SDU Transmitted Event Parameters. */
|
||||
} params; /**< Event Parameters. */
|
||||
} ble_l2cap_evt_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
/**@addtogroup BLE_L2CAP_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Set up an L2CAP channel.
|
||||
*
|
||||
* @details This function is used to:
|
||||
* - Request setup of an L2CAP channel: sends an LE Credit Based Connection Request packet to a peer.
|
||||
* - Reply to a setup request of an L2CAP channel (if called in response to a
|
||||
* @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST event): sends an LE Credit Based Connection
|
||||
* Response packet to a peer.
|
||||
*
|
||||
* @note A call to this function will require the application to keep the SDU data buffer alive
|
||||
* until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX or
|
||||
* @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_L2CAP_EVT_CH_SETUP, Setup successful.}
|
||||
* @event{@ref BLE_L2CAP_EVT_CH_SETUP_REFUSED, Setup failed.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_L2CAP_CH_SETUP_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection Handle.
|
||||
* @param[in,out] p_local_cid Pointer to a uint16_t containing Local Channel ID of the L2CAP channel:
|
||||
* - As input: @ref BLE_L2CAP_CID_INVALID when requesting setup of an L2CAP
|
||||
* channel or local_cid provided in the @ref BLE_L2CAP_EVT_CH_SETUP_REQUEST
|
||||
* event when replying to a setup request of an L2CAP channel.
|
||||
* - As output: local_cid for this channel.
|
||||
* @param[in] p_params L2CAP channel parameters.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued request or response for transmission.
|
||||
* @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH Supplied higher rx_mps than has been configured on this link.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (L2CAP channel already set up).
|
||||
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
|
||||
* @retval ::NRF_ERROR_RESOURCES The limit has been reached for available L2CAP channels,
|
||||
* see @ref ble_l2cap_conn_cfg_t::ch_count.
|
||||
*/
|
||||
SVCALL(SD_BLE_L2CAP_CH_SETUP, uint32_t, sd_ble_l2cap_ch_setup(uint16_t conn_handle, uint16_t *p_local_cid, ble_l2cap_ch_setup_params_t const *p_params));
|
||||
|
||||
/**@brief Release an L2CAP channel.
|
||||
*
|
||||
* @details This sends a Disconnection Request packet to a peer.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_L2CAP_EVT_CH_RELEASED, Release complete.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_L2CAP_CH_RELEASE_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection Handle.
|
||||
* @param[in] local_cid Local Channel ID of the L2CAP channel.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued request for transmission.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
|
||||
* in progress for the L2CAP channel).
|
||||
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
|
||||
*/
|
||||
SVCALL(SD_BLE_L2CAP_CH_RELEASE, uint32_t, sd_ble_l2cap_ch_release(uint16_t conn_handle, uint16_t local_cid));
|
||||
|
||||
/**@brief Receive an SDU on an L2CAP channel.
|
||||
*
|
||||
* @details This may issue additional credits to the peer using an LE Flow Control Credit packet.
|
||||
*
|
||||
* @note A call to this function will require the application to keep the memory pointed by
|
||||
* @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_RX
|
||||
* or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event.
|
||||
*
|
||||
* @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::rx_queue_size SDU data buffers
|
||||
* for reception per L2CAP channel.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_L2CAP_EVT_CH_RX, The SDU is received.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_L2CAP_CH_RX_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection Handle.
|
||||
* @param[in] local_cid Local Channel ID of the L2CAP channel.
|
||||
* @param[in] p_sdu_buf Pointer to the SDU data buffer.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Buffer accepted.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
|
||||
* in progress for an L2CAP channel).
|
||||
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
|
||||
* @retval ::NRF_ERROR_RESOURCES Too many SDU data buffers supplied. Wait for a
|
||||
* @ref BLE_L2CAP_EVT_CH_RX event and retry.
|
||||
*/
|
||||
SVCALL(SD_BLE_L2CAP_CH_RX, uint32_t, sd_ble_l2cap_ch_rx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf));
|
||||
|
||||
/**@brief Transmit an SDU on an L2CAP channel.
|
||||
*
|
||||
* @note A call to this function will require the application to keep the memory pointed by
|
||||
* @ref ble_data_t::p_data alive until the SDU data buffer is returned in @ref BLE_L2CAP_EVT_CH_TX
|
||||
* or @ref BLE_L2CAP_EVT_CH_SDU_BUF_RELEASED event.
|
||||
*
|
||||
* @note The SoftDevice can queue up to @ref ble_l2cap_conn_cfg_t::tx_queue_size SDUs for
|
||||
* transmission per L2CAP channel.
|
||||
*
|
||||
* @note The application can keep track of the available credits for transmission by following
|
||||
* the procedure below:
|
||||
* - Store initial credits given by the peer in a variable.
|
||||
* (Initial credits are provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)
|
||||
* - Decrement the variable, which stores the currently available credits, by
|
||||
* ceiling((@ref ble_data_t::len + 2) / tx_mps) when a call to this function returns
|
||||
* @ref NRF_SUCCESS. (tx_mps is provided in a @ref BLE_L2CAP_EVT_CH_SETUP event.)
|
||||
* - Increment the variable, which stores the currently available credits, by additional
|
||||
* credits given by the peer in a @ref BLE_L2CAP_EVT_CH_CREDIT event.
|
||||
*
|
||||
* @events
|
||||
* @event{@ref BLE_L2CAP_EVT_CH_TX, The SDU is transmitted.}
|
||||
* @endevents
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_L2CAP_CH_TX_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection Handle.
|
||||
* @param[in] local_cid Local Channel ID of the L2CAP channel.
|
||||
* @param[in] p_sdu_buf Pointer to the SDU data buffer.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Successfully queued L2CAP SDU for transmission.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
|
||||
* in progress for the L2CAP channel).
|
||||
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
|
||||
* @retval ::NRF_ERROR_DATA_SIZE Invalid SDU length supplied, must not be more than
|
||||
* @ref ble_l2cap_ch_tx_params_t::tx_mtu provided in
|
||||
* @ref BLE_L2CAP_EVT_CH_SETUP event.
|
||||
* @retval ::NRF_ERROR_RESOURCES Too many SDUs queued for transmission. Wait for a
|
||||
* @ref BLE_L2CAP_EVT_CH_TX event and retry.
|
||||
*/
|
||||
SVCALL(SD_BLE_L2CAP_CH_TX, uint32_t, sd_ble_l2cap_ch_tx(uint16_t conn_handle, uint16_t local_cid, ble_data_t const *p_sdu_buf));
|
||||
|
||||
/**@brief Advanced SDU reception flow control.
|
||||
*
|
||||
* @details Adjust the way the SoftDevice issues credits to the peer.
|
||||
* This may issue additional credits to the peer using an LE Flow Control Credit packet.
|
||||
*
|
||||
* @mscs
|
||||
* @mmsc{@ref BLE_L2CAP_CH_FLOW_CONTROL_MSC}
|
||||
* @endmscs
|
||||
*
|
||||
* @param[in] conn_handle Connection Handle.
|
||||
* @param[in] local_cid Local Channel ID of the L2CAP channel or @ref BLE_L2CAP_CID_INVALID to set
|
||||
* the value that will be used for newly created channels.
|
||||
* @param[in] credits Number of credits that the SoftDevice will make sure the peer has every
|
||||
* time it starts using a new reception buffer.
|
||||
* - @ref BLE_L2CAP_CREDITS_DEFAULT is the default value the SoftDevice will
|
||||
* use if this function is not called.
|
||||
* - If set to zero, the SoftDevice will stop issuing credits for new reception
|
||||
* buffers the application provides or has provided. SDU reception that is
|
||||
* currently ongoing will be allowed to complete.
|
||||
* @param[out] p_credits NULL or pointer to a uint16_t. If a valid pointer is provided, it will be
|
||||
* written by the SoftDevice with the number of credits that is or will be
|
||||
* available to the peer. If the value written by the SoftDevice is 0 when
|
||||
* credits parameter was set to 0, the peer will not be able to send more
|
||||
* data until more credits are provided by calling this function again with
|
||||
* credits > 0. This parameter is ignored when local_cid is set to
|
||||
* @ref BLE_L2CAP_CID_INVALID.
|
||||
*
|
||||
* @note Application should take care when setting number of credits higher than default value. In
|
||||
* this case the application must make sure that the SoftDevice always has reception buffers
|
||||
* available (see @ref sd_ble_l2cap_ch_rx) for that channel. If the SoftDevice does not have
|
||||
* such buffers available, packets may be NACKed on the Link Layer and all Bluetooth traffic
|
||||
* on the connection handle may be stalled until the SoftDevice again has an available
|
||||
* reception buffer. This applies even if the application has used this call to set the
|
||||
* credits back to default, or zero.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS Flow control parameters accepted.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
|
||||
* @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE Invalid State to perform operation (Setup or release is
|
||||
* in progress for an L2CAP channel).
|
||||
* @retval ::NRF_ERROR_NOT_FOUND CID not found.
|
||||
*/
|
||||
SVCALL(SD_BLE_L2CAP_CH_FLOW_CONTROL, uint32_t, sd_ble_l2cap_ch_flow_control(uint16_t conn_handle, uint16_t local_cid, uint16_t credits, uint16_t *p_credits));
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // BLE_L2CAP_H__
|
||||
|
||||
/**
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,156 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2018, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON
|
||||
@{
|
||||
@defgroup ble_ranges Module specific SVC, event and option number subranges
|
||||
@{
|
||||
|
||||
@brief Definition of SVC, event and option number subranges for each API module.
|
||||
|
||||
@note
|
||||
SVCs, event and option numbers are split into subranges for each API module.
|
||||
Each module receives its entire allocated range of SVC calls, whether implemented or not,
|
||||
but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range.
|
||||
|
||||
Note that the symbols BLE_<module>_SVC_LAST is the end of the allocated SVC range,
|
||||
rather than the last SVC function call actually defined and implemented.
|
||||
|
||||
Specific SVC, event and option values are defined in each module's ble_<module>.h file,
|
||||
which defines names of each individual SVC code based on the range start value.
|
||||
*/
|
||||
|
||||
#ifndef BLE_RANGES_H__
|
||||
#define BLE_RANGES_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define BLE_SVC_BASE 0x60 /**< Common BLE SVC base. */
|
||||
#define BLE_SVC_LAST 0x6B /**< Common BLE SVC last. */
|
||||
|
||||
#define BLE_GAP_SVC_BASE 0x6C /**< GAP BLE SVC base. */
|
||||
#define BLE_GAP_SVC_LAST 0x9A /**< GAP BLE SVC last. */
|
||||
|
||||
#define BLE_GATTC_SVC_BASE 0x9B /**< GATTC BLE SVC base. */
|
||||
#define BLE_GATTC_SVC_LAST 0xA7 /**< GATTC BLE SVC last. */
|
||||
|
||||
#define BLE_GATTS_SVC_BASE 0xA8 /**< GATTS BLE SVC base. */
|
||||
#define BLE_GATTS_SVC_LAST 0xB7 /**< GATTS BLE SVC last. */
|
||||
|
||||
#define BLE_L2CAP_SVC_BASE 0xB8 /**< L2CAP BLE SVC base. */
|
||||
#define BLE_L2CAP_SVC_LAST 0xBF /**< L2CAP BLE SVC last. */
|
||||
|
||||
|
||||
#define BLE_EVT_INVALID 0x00 /**< Invalid BLE Event. */
|
||||
|
||||
#define BLE_EVT_BASE 0x01 /**< Common BLE Event base. */
|
||||
#define BLE_EVT_LAST 0x0F /**< Common BLE Event last. */
|
||||
|
||||
#define BLE_GAP_EVT_BASE 0x10 /**< GAP BLE Event base. */
|
||||
#define BLE_GAP_EVT_LAST 0x2F /**< GAP BLE Event last. */
|
||||
|
||||
#define BLE_GATTC_EVT_BASE 0x30 /**< GATTC BLE Event base. */
|
||||
#define BLE_GATTC_EVT_LAST 0x4F /**< GATTC BLE Event last. */
|
||||
|
||||
#define BLE_GATTS_EVT_BASE 0x50 /**< GATTS BLE Event base. */
|
||||
#define BLE_GATTS_EVT_LAST 0x6F /**< GATTS BLE Event last. */
|
||||
|
||||
#define BLE_L2CAP_EVT_BASE 0x70 /**< L2CAP BLE Event base. */
|
||||
#define BLE_L2CAP_EVT_LAST 0x8F /**< L2CAP BLE Event last. */
|
||||
|
||||
|
||||
#define BLE_OPT_INVALID 0x00 /**< Invalid BLE Option. */
|
||||
|
||||
#define BLE_OPT_BASE 0x01 /**< Common BLE Option base. */
|
||||
#define BLE_OPT_LAST 0x1F /**< Common BLE Option last. */
|
||||
|
||||
#define BLE_GAP_OPT_BASE 0x20 /**< GAP BLE Option base. */
|
||||
#define BLE_GAP_OPT_LAST 0x3F /**< GAP BLE Option last. */
|
||||
|
||||
#define BLE_GATT_OPT_BASE 0x40 /**< GATT BLE Option base. */
|
||||
#define BLE_GATT_OPT_LAST 0x5F /**< GATT BLE Option last. */
|
||||
|
||||
#define BLE_GATTC_OPT_BASE 0x60 /**< GATTC BLE Option base. */
|
||||
#define BLE_GATTC_OPT_LAST 0x7F /**< GATTC BLE Option last. */
|
||||
|
||||
#define BLE_GATTS_OPT_BASE 0x80 /**< GATTS BLE Option base. */
|
||||
#define BLE_GATTS_OPT_LAST 0x9F /**< GATTS BLE Option last. */
|
||||
|
||||
#define BLE_L2CAP_OPT_BASE 0xA0 /**< L2CAP BLE Option base. */
|
||||
#define BLE_L2CAP_OPT_LAST 0xBF /**< L2CAP BLE Option last. */
|
||||
|
||||
|
||||
#define BLE_CFG_INVALID 0x00 /**< Invalid BLE configuration. */
|
||||
|
||||
#define BLE_CFG_BASE 0x01 /**< Common BLE configuration base. */
|
||||
#define BLE_CFG_LAST 0x1F /**< Common BLE configuration last. */
|
||||
|
||||
#define BLE_CONN_CFG_BASE 0x20 /**< BLE connection configuration base. */
|
||||
#define BLE_CONN_CFG_LAST 0x3F /**< BLE connection configuration last. */
|
||||
|
||||
#define BLE_GAP_CFG_BASE 0x40 /**< GAP BLE configuration base. */
|
||||
#define BLE_GAP_CFG_LAST 0x5F /**< GAP BLE configuration last. */
|
||||
|
||||
#define BLE_GATT_CFG_BASE 0x60 /**< GATT BLE configuration base. */
|
||||
#define BLE_GATT_CFG_LAST 0x7F /**< GATT BLE configuration last. */
|
||||
|
||||
#define BLE_GATTC_CFG_BASE 0x80 /**< GATTC BLE configuration base. */
|
||||
#define BLE_GATTC_CFG_LAST 0x9F /**< GATTC BLE configuration last. */
|
||||
|
||||
#define BLE_GATTS_CFG_BASE 0xA0 /**< GATTS BLE configuration base. */
|
||||
#define BLE_GATTS_CFG_LAST 0xBF /**< GATTS BLE configuration last. */
|
||||
|
||||
#define BLE_L2CAP_CFG_BASE 0xC0 /**< L2CAP BLE configuration base. */
|
||||
#define BLE_L2CAP_CFG_LAST 0xDF /**< L2CAP BLE configuration last. */
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* BLE_RANGES_H__ */
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,215 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup BLE_COMMON
|
||||
@{
|
||||
@defgroup ble_types Common types and macro definitions
|
||||
@{
|
||||
|
||||
@brief Common types and macro definitions for the BLE SoftDevice.
|
||||
*/
|
||||
|
||||
#ifndef BLE_TYPES_H__
|
||||
#define BLE_TYPES_H__
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup BLE_TYPES_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/** @defgroup BLE_CONN_HANDLES BLE Connection Handles
|
||||
* @{ */
|
||||
#define BLE_CONN_HANDLE_INVALID 0xFFFF /**< Invalid Connection Handle. */
|
||||
#define BLE_CONN_HANDLE_ALL 0xFFFE /**< Applies to all Connection Handles. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_UUID_VALUES Assigned Values for BLE UUIDs
|
||||
* @{ */
|
||||
/* Generic UUIDs, applicable to all services */
|
||||
#define BLE_UUID_UNKNOWN 0x0000 /**< Reserved UUID. */
|
||||
#define BLE_UUID_SERVICE_PRIMARY 0x2800 /**< Primary Service. */
|
||||
#define BLE_UUID_SERVICE_SECONDARY 0x2801 /**< Secondary Service. */
|
||||
#define BLE_UUID_SERVICE_INCLUDE 0x2802 /**< Include. */
|
||||
#define BLE_UUID_CHARACTERISTIC 0x2803 /**< Characteristic. */
|
||||
#define BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP 0x2900 /**< Characteristic Extended Properties Descriptor. */
|
||||
#define BLE_UUID_DESCRIPTOR_CHAR_USER_DESC 0x2901 /**< Characteristic User Description Descriptor. */
|
||||
#define BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG 0x2902 /**< Client Characteristic Configuration Descriptor. */
|
||||
#define BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG 0x2903 /**< Server Characteristic Configuration Descriptor. */
|
||||
#define BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT 0x2904 /**< Characteristic Presentation Format Descriptor. */
|
||||
#define BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT 0x2905 /**< Characteristic Aggregate Format Descriptor. */
|
||||
/* GATT specific UUIDs */
|
||||
#define BLE_UUID_GATT 0x1801 /**< Generic Attribute Profile. */
|
||||
#define BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED 0x2A05 /**< Service Changed Characteristic. */
|
||||
/* GAP specific UUIDs */
|
||||
#define BLE_UUID_GAP 0x1800 /**< Generic Access Profile. */
|
||||
#define BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME 0x2A00 /**< Device Name Characteristic. */
|
||||
#define BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE 0x2A01 /**< Appearance Characteristic. */
|
||||
#define BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR 0x2A03 /**< Reconnection Address Characteristic. */
|
||||
#define BLE_UUID_GAP_CHARACTERISTIC_PPCP 0x2A04 /**< Peripheral Preferred Connection Parameters Characteristic. */
|
||||
#define BLE_UUID_GAP_CHARACTERISTIC_CAR 0x2AA6 /**< Central Address Resolution Characteristic. */
|
||||
#define BLE_UUID_GAP_CHARACTERISTIC_RPA_ONLY 0x2AC9 /**< Resolvable Private Address Only Characteristic. */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_UUID_TYPES Types of UUID
|
||||
* @{ */
|
||||
#define BLE_UUID_TYPE_UNKNOWN 0x00 /**< Invalid UUID type. */
|
||||
#define BLE_UUID_TYPE_BLE 0x01 /**< Bluetooth SIG UUID (16-bit). */
|
||||
#define BLE_UUID_TYPE_VENDOR_BEGIN 0x02 /**< Vendor UUID types start at this index (128-bit). */
|
||||
/** @} */
|
||||
|
||||
|
||||
/** @defgroup BLE_APPEARANCES Bluetooth Appearance values
|
||||
* @note Retrieved from http://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
|
||||
* @{ */
|
||||
#define BLE_APPEARANCE_UNKNOWN 0 /**< Unknown. */
|
||||
#define BLE_APPEARANCE_GENERIC_PHONE 64 /**< Generic Phone. */
|
||||
#define BLE_APPEARANCE_GENERIC_COMPUTER 128 /**< Generic Computer. */
|
||||
#define BLE_APPEARANCE_GENERIC_WATCH 192 /**< Generic Watch. */
|
||||
#define BLE_APPEARANCE_WATCH_SPORTS_WATCH 193 /**< Watch: Sports Watch. */
|
||||
#define BLE_APPEARANCE_GENERIC_CLOCK 256 /**< Generic Clock. */
|
||||
#define BLE_APPEARANCE_GENERIC_DISPLAY 320 /**< Generic Display. */
|
||||
#define BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384 /**< Generic Remote Control. */
|
||||
#define BLE_APPEARANCE_GENERIC_EYE_GLASSES 448 /**< Generic Eye-glasses. */
|
||||
#define BLE_APPEARANCE_GENERIC_TAG 512 /**< Generic Tag. */
|
||||
#define BLE_APPEARANCE_GENERIC_KEYRING 576 /**< Generic Keyring. */
|
||||
#define BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640 /**< Generic Media Player. */
|
||||
#define BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704 /**< Generic Barcode Scanner. */
|
||||
#define BLE_APPEARANCE_GENERIC_THERMOMETER 768 /**< Generic Thermometer. */
|
||||
#define BLE_APPEARANCE_THERMOMETER_EAR 769 /**< Thermometer: Ear. */
|
||||
#define BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832 /**< Generic Heart rate Sensor. */
|
||||
#define BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833 /**< Heart Rate Sensor: Heart Rate Belt. */
|
||||
#define BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896 /**< Generic Blood Pressure. */
|
||||
#define BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897 /**< Blood Pressure: Arm. */
|
||||
#define BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898 /**< Blood Pressure: Wrist. */
|
||||
#define BLE_APPEARANCE_GENERIC_HID 960 /**< Human Interface Device (HID). */
|
||||
#define BLE_APPEARANCE_HID_KEYBOARD 961 /**< Keyboard (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_MOUSE 962 /**< Mouse (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_JOYSTICK 963 /**< Joystick (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_GAMEPAD 964 /**< Gamepad (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965 /**< Digitizer Tablet (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_CARD_READER 966 /**< Card Reader (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_DIGITAL_PEN 967 /**< Digital Pen (HID Subtype). */
|
||||
#define BLE_APPEARANCE_HID_BARCODE 968 /**< Barcode Scanner (HID Subtype). */
|
||||
#define BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024 /**< Generic Glucose Meter. */
|
||||
#define BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088 /**< Generic Running Walking Sensor. */
|
||||
#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089 /**< Running Walking Sensor: In-Shoe. */
|
||||
#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090 /**< Running Walking Sensor: On-Shoe. */
|
||||
#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091 /**< Running Walking Sensor: On-Hip. */
|
||||
#define BLE_APPEARANCE_GENERIC_CYCLING 1152 /**< Generic Cycling. */
|
||||
#define BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153 /**< Cycling: Cycling Computer. */
|
||||
#define BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154 /**< Cycling: Speed Sensor. */
|
||||
#define BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155 /**< Cycling: Cadence Sensor. */
|
||||
#define BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156 /**< Cycling: Power Sensor. */
|
||||
#define BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157 /**< Cycling: Speed and Cadence Sensor. */
|
||||
#define BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 3136 /**< Generic Pulse Oximeter. */
|
||||
#define BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 3137 /**< Fingertip (Pulse Oximeter subtype). */
|
||||
#define BLE_APPEARANCE_PULSE_OXIMETER_WRIST_WORN 3138 /**< Wrist Worn(Pulse Oximeter subtype). */
|
||||
#define BLE_APPEARANCE_GENERIC_WEIGHT_SCALE 3200 /**< Generic Weight Scale. */
|
||||
#define BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS_ACT 5184 /**< Generic Outdoor Sports Activity. */
|
||||
#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_DISP 5185 /**< Location Display Device (Outdoor Sports Activity subtype). */
|
||||
#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_DISP 5186 /**< Location and Navigation Display Device (Outdoor Sports Activity subtype). */
|
||||
#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_POD 5187 /**< Location Pod (Outdoor Sports Activity subtype). */
|
||||
#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_POD 5188 /**< Location and Navigation Pod (Outdoor Sports Activity subtype). */
|
||||
/** @} */
|
||||
|
||||
/** @brief Set .type and .uuid fields of ble_uuid_struct to specified UUID value. */
|
||||
#define BLE_UUID_BLE_ASSIGN(instance, value) do {\
|
||||
instance.type = BLE_UUID_TYPE_BLE; \
|
||||
instance.uuid = value;} while(0)
|
||||
|
||||
/** @brief Copy type and uuid members from src to dst ble_uuid_t pointer. Both pointers must be valid/non-null. */
|
||||
#define BLE_UUID_COPY_PTR(dst, src) do {\
|
||||
(dst)->type = (src)->type; \
|
||||
(dst)->uuid = (src)->uuid;} while(0)
|
||||
|
||||
/** @brief Copy type and uuid members from src to dst ble_uuid_t struct. */
|
||||
#define BLE_UUID_COPY_INST(dst, src) do {\
|
||||
(dst).type = (src).type; \
|
||||
(dst).uuid = (src).uuid;} while(0)
|
||||
|
||||
/** @brief Compare for equality both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
|
||||
#define BLE_UUID_EQ(p_uuid1, p_uuid2) \
|
||||
(((p_uuid1)->type == (p_uuid2)->type) && ((p_uuid1)->uuid == (p_uuid2)->uuid))
|
||||
|
||||
/** @brief Compare for difference both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
|
||||
#define BLE_UUID_NEQ(p_uuid1, p_uuid2) \
|
||||
(((p_uuid1)->type != (p_uuid2)->type) || ((p_uuid1)->uuid != (p_uuid2)->uuid))
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup BLE_TYPES_STRUCTURES Structures
|
||||
* @{ */
|
||||
|
||||
/** @brief 128 bit UUID values. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t uuid128[16]; /**< Little-Endian UUID bytes. */
|
||||
} ble_uuid128_t;
|
||||
|
||||
/** @brief Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs. */
|
||||
typedef struct
|
||||
{
|
||||
uint16_t uuid; /**< 16-bit UUID value or octets 12-13 of 128-bit UUID. */
|
||||
uint8_t type; /**< UUID type, see @ref BLE_UUID_TYPES. If type is @ref BLE_UUID_TYPE_UNKNOWN, the value of uuid is undefined. */
|
||||
} ble_uuid_t;
|
||||
|
||||
/**@brief Data structure. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t *p_data; /**< Pointer to the data buffer provided to/from the application. */
|
||||
uint16_t len; /**< Length of the data buffer, in bytes. */
|
||||
} ble_data_t;
|
||||
|
||||
/** @} */
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BLE_TYPES_H__ */
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,268 @@
|
||||
/*
|
||||
* Copyright (c) 2014 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@defgroup nrf_mbr_api Master Boot Record API
|
||||
@{
|
||||
|
||||
@brief APIs for updating SoftDevice and BootLoader
|
||||
|
||||
*/
|
||||
|
||||
#ifndef NRF_MBR_H__
|
||||
#define NRF_MBR_H__
|
||||
|
||||
#include "nrf_svc.h"
|
||||
#include <stdint.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup NRF_MBR_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/**@brief MBR SVC Base number. */
|
||||
#define MBR_SVC_BASE (0x18)
|
||||
|
||||
/**@brief Page size in words. */
|
||||
#define MBR_PAGE_SIZE_IN_WORDS (1024)
|
||||
|
||||
/** @brief The size that must be reserved for the MBR when a SoftDevice is written to flash.
|
||||
This is the offset where the first byte of the SoftDevice hex file is written. */
|
||||
#define MBR_SIZE (0x1000)
|
||||
|
||||
/** @brief Location (in the flash memory) of the bootloader address. */
|
||||
#define MBR_BOOTLOADER_ADDR (0xFF8)
|
||||
|
||||
/** @brief Location (in UICR) of the bootloader address. */
|
||||
#define MBR_UICR_BOOTLOADER_ADDR (&(NRF_UICR->NRFFW[0]))
|
||||
|
||||
/** @brief Location (in the flash memory) of the address of the MBR parameter page. */
|
||||
#define MBR_PARAM_PAGE_ADDR (0xFFC)
|
||||
|
||||
/** @brief Location (in UICR) of the address of the MBR parameter page. */
|
||||
#define MBR_UICR_PARAM_PAGE_ADDR (&(NRF_UICR->NRFFW[1]))
|
||||
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_MBR_ENUMS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**@brief nRF Master Boot Record API SVC numbers. */
|
||||
enum NRF_MBR_SVCS
|
||||
{
|
||||
SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */
|
||||
};
|
||||
|
||||
/**@brief Possible values for ::sd_mbr_command_t.command */
|
||||
enum NRF_MBR_COMMANDS
|
||||
{
|
||||
SD_MBR_COMMAND_COPY_BL, /**< Copy a new BootLoader. @see ::sd_mbr_command_copy_bl_t*/
|
||||
SD_MBR_COMMAND_COPY_SD, /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/
|
||||
SD_MBR_COMMAND_INIT_SD, /**< Initialize forwarding interrupts to SD, and run reset function in SD. Does not require any parameters in ::sd_mbr_command_t params.*/
|
||||
SD_MBR_COMMAND_COMPARE, /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/
|
||||
SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Change the address the MBR starts after a reset. @see ::sd_mbr_command_vector_table_base_set_t*/
|
||||
SD_MBR_COMMAND_RESERVED,
|
||||
SD_MBR_COMMAND_IRQ_FORWARD_ADDRESS_SET, /**< Start forwarding all interrupts to this address. @see ::sd_mbr_command_irq_forward_address_set_t*/
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_MBR_TYPES Types
|
||||
* @{ */
|
||||
|
||||
/**@brief This command copies part of a new SoftDevice
|
||||
*
|
||||
* The destination area is erased before copying.
|
||||
* If dst is in the middle of a flash page, that whole flash page will be erased.
|
||||
* If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
|
||||
*
|
||||
* The user of this function is responsible for setting the BPROT registers.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly.
|
||||
* @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t *src; /**< Pointer to the source of data to be copied.*/
|
||||
uint32_t *dst; /**< Pointer to the destination where the content is to be copied.*/
|
||||
uint32_t len; /**< Number of 32 bit words to copy. Must be a multiple of @ref MBR_PAGE_SIZE_IN_WORDS words.*/
|
||||
} sd_mbr_command_copy_sd_t;
|
||||
|
||||
|
||||
/**@brief This command works like memcmp, but takes the length in words.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal.
|
||||
* @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t *ptr1; /**< Pointer to block of memory. */
|
||||
uint32_t *ptr2; /**< Pointer to block of memory. */
|
||||
uint32_t len; /**< Number of 32 bit words to compare.*/
|
||||
} sd_mbr_command_compare_t;
|
||||
|
||||
|
||||
/**@brief This command copies a new BootLoader.
|
||||
*
|
||||
* The MBR assumes that either @ref MBR_BOOTLOADER_ADDR or @ref MBR_UICR_BOOTLOADER_ADDR is set to
|
||||
* the address where the bootloader will be copied. If both addresses are set, the MBR will prioritize
|
||||
* @ref MBR_BOOTLOADER_ADDR.
|
||||
*
|
||||
* The bootloader destination is erased by this function.
|
||||
* If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased.
|
||||
*
|
||||
* This command requires that @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR is set,
|
||||
* see @ref sd_mbr_command.
|
||||
*
|
||||
* This command will use the flash protect peripheral (BPROT or ACL) to protect the flash that is
|
||||
* not intended to be written.
|
||||
*
|
||||
* On success, this function will not return. It will start the new bootloader from reset-vector as normal.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
|
||||
* @retval ::NRF_ERROR_FORBIDDEN if the bootloader address is not set.
|
||||
* @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area.
|
||||
* @retval ::NRF_ERROR_NO_MEM No MBR parameter page is provided. See @ref sd_mbr_command.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t *bl_src; /**< Pointer to the source of the bootloader to be be copied.*/
|
||||
uint32_t bl_len; /**< Number of 32 bit words to copy for BootLoader. */
|
||||
} sd_mbr_command_copy_bl_t;
|
||||
|
||||
/**@brief Change the address the MBR starts after a reset
|
||||
*
|
||||
* Once this function has been called, this address is where the MBR will start to forward
|
||||
* interrupts to after a reset.
|
||||
*
|
||||
* To restore default forwarding, this function should be called with @ref address set to 0. If a
|
||||
* bootloader is present, interrupts will be forwarded to the bootloader. If not, interrupts will
|
||||
* be forwarded to the SoftDevice.
|
||||
*
|
||||
* The location of a bootloader can be specified in @ref MBR_BOOTLOADER_ADDR or
|
||||
* @ref MBR_UICR_BOOTLOADER_ADDR. If both addresses are set, the MBR will prioritize
|
||||
* @ref MBR_BOOTLOADER_ADDR.
|
||||
*
|
||||
* This command requires that @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR is set,
|
||||
* see @ref sd_mbr_command.
|
||||
*
|
||||
* On success, this function will not return. It will reset the device.
|
||||
*
|
||||
* @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size.
|
||||
* @retval ::NRF_ERROR_NO_MEM No MBR parameter page is provided. See @ref sd_mbr_command.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
|
||||
} sd_mbr_command_vector_table_base_set_t;
|
||||
|
||||
/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR
|
||||
*
|
||||
* Unlike sd_mbr_command_vector_table_base_set_t, this function does not reset, and it does not
|
||||
* change where the MBR starts after reset.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
|
||||
} sd_mbr_command_irq_forward_address_set_t;
|
||||
|
||||
/**@brief Input structure containing data used when calling ::sd_mbr_command
|
||||
*
|
||||
* Depending on what command value that is set, the corresponding params value type must also be
|
||||
* set. See @ref NRF_MBR_COMMANDS for command types and corresponding params value type. If command
|
||||
* @ref SD_MBR_COMMAND_INIT_SD is set, it is not necessary to set any values under params.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t command; /**< Type of command to be issued. See @ref NRF_MBR_COMMANDS. */
|
||||
union
|
||||
{
|
||||
sd_mbr_command_copy_sd_t copy_sd; /**< Parameters for copy SoftDevice.*/
|
||||
sd_mbr_command_compare_t compare; /**< Parameters for verify.*/
|
||||
sd_mbr_command_copy_bl_t copy_bl; /**< Parameters for copy BootLoader. Requires parameter page. */
|
||||
sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set. Requires parameter page.*/
|
||||
sd_mbr_command_irq_forward_address_set_t irq_forward_address_set; /**< Parameters for irq forward address set*/
|
||||
} params; /**< Command parameters. */
|
||||
} sd_mbr_command_t;
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_MBR_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Issue Master Boot Record commands
|
||||
*
|
||||
* Commands used when updating a SoftDevice and bootloader.
|
||||
*
|
||||
* The @ref SD_MBR_COMMAND_COPY_BL and @ref SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires
|
||||
* parameters to be retained by the MBR when resetting the IC. This is done in a separate flash
|
||||
* page. The location of the flash page should be provided by the application in either
|
||||
* @ref MBR_PARAM_PAGE_ADDR or @ref MBR_UICR_PARAM_PAGE_ADDR. If both addresses are set, the MBR
|
||||
* will prioritize @ref MBR_PARAM_PAGE_ADDR. This page will be cleared by the MBR and is used to
|
||||
* store the command before reset. When an address is specified, the page it refers to must not be
|
||||
* used by the application. If no address is provided by the application, i.e. both
|
||||
* @ref MBR_PARAM_PAGE_ADDR and @ref MBR_UICR_PARAM_PAGE_ADDR is 0xFFFFFFFF, MBR commands which use
|
||||
* flash will be unavailable and return @ref NRF_ERROR_NO_MEM.
|
||||
*
|
||||
* @param[in] param Pointer to a struct describing the command.
|
||||
*
|
||||
* @note For a complete set of return values, see ::sd_mbr_command_copy_sd_t,
|
||||
* ::sd_mbr_command_copy_bl_t, ::sd_mbr_command_compare_t,
|
||||
* ::sd_mbr_command_vector_table_base_set_t, ::sd_mbr_command_irq_forward_address_set_t
|
||||
*
|
||||
* @retval ::NRF_ERROR_NO_MEM No MBR parameter page provided
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM if an invalid command is given.
|
||||
*/
|
||||
SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param));
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // NRF_MBR_H__
|
||||
|
||||
/**
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,90 @@
|
||||
/*
|
||||
* Copyright (c) 2014 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@defgroup nrf_error SoftDevice Global Error Codes
|
||||
@{
|
||||
|
||||
@brief Global Error definitions
|
||||
*/
|
||||
|
||||
/* Header guard */
|
||||
#ifndef NRF_ERROR_H__
|
||||
#define NRF_ERROR_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions
|
||||
* @{ */
|
||||
#define NRF_ERROR_BASE_NUM (0x0) ///< Global error base
|
||||
#define NRF_ERROR_SDM_BASE_NUM (0x1000) ///< SDM error base
|
||||
#define NRF_ERROR_SOC_BASE_NUM (0x2000) ///< SoC error base
|
||||
#define NRF_ERROR_STK_BASE_NUM (0x3000) ///< STK error base
|
||||
/** @} */
|
||||
|
||||
#define NRF_SUCCESS (NRF_ERROR_BASE_NUM + 0) ///< Successful command
|
||||
#define NRF_ERROR_SVC_HANDLER_MISSING (NRF_ERROR_BASE_NUM + 1) ///< SVC handler is missing
|
||||
#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED (NRF_ERROR_BASE_NUM + 2) ///< SoftDevice has not been enabled
|
||||
#define NRF_ERROR_INTERNAL (NRF_ERROR_BASE_NUM + 3) ///< Internal Error
|
||||
#define NRF_ERROR_NO_MEM (NRF_ERROR_BASE_NUM + 4) ///< No Memory for operation
|
||||
#define NRF_ERROR_NOT_FOUND (NRF_ERROR_BASE_NUM + 5) ///< Not found
|
||||
#define NRF_ERROR_NOT_SUPPORTED (NRF_ERROR_BASE_NUM + 6) ///< Not supported
|
||||
#define NRF_ERROR_INVALID_PARAM (NRF_ERROR_BASE_NUM + 7) ///< Invalid Parameter
|
||||
#define NRF_ERROR_INVALID_STATE (NRF_ERROR_BASE_NUM + 8) ///< Invalid state, operation disallowed in this state
|
||||
#define NRF_ERROR_INVALID_LENGTH (NRF_ERROR_BASE_NUM + 9) ///< Invalid Length
|
||||
#define NRF_ERROR_INVALID_FLAGS (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags
|
||||
#define NRF_ERROR_INVALID_DATA (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data
|
||||
#define NRF_ERROR_DATA_SIZE (NRF_ERROR_BASE_NUM + 12) ///< Invalid Data size
|
||||
#define NRF_ERROR_TIMEOUT (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out
|
||||
#define NRF_ERROR_NULL (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer
|
||||
#define NRF_ERROR_FORBIDDEN (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation
|
||||
#define NRF_ERROR_INVALID_ADDR (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address
|
||||
#define NRF_ERROR_BUSY (NRF_ERROR_BASE_NUM + 17) ///< Busy
|
||||
#define NRF_ERROR_CONN_COUNT (NRF_ERROR_BASE_NUM + 18) ///< Maximum connection count exceeded.
|
||||
#define NRF_ERROR_RESOURCES (NRF_ERROR_BASE_NUM + 19) ///< Not enough resources for operation
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // NRF_ERROR_H__
|
||||
|
||||
/**
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,70 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup nrf_sdm_api
|
||||
@{
|
||||
@defgroup nrf_sdm_error SoftDevice Manager Error Codes
|
||||
@{
|
||||
|
||||
@brief Error definitions for the SDM API
|
||||
*/
|
||||
|
||||
/* Header guard */
|
||||
#ifndef NRF_ERROR_SDM_H__
|
||||
#define NRF_ERROR_SDM_H__
|
||||
|
||||
#include "nrf_error.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN (NRF_ERROR_SDM_BASE_NUM + 0) ///< Unknown LFCLK source.
|
||||
#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1) ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts).
|
||||
#define NRF_ERROR_SDM_INCORRECT_CLENR0 (NRF_ERROR_SDM_BASE_NUM + 2) ///< Incorrect CLENR0 (can be caused by erroneous SoftDevice flashing).
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // NRF_ERROR_SDM_H__
|
||||
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,85 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@addtogroup nrf_soc_api
|
||||
@{
|
||||
@defgroup nrf_soc_error SoC Library Error Codes
|
||||
@{
|
||||
|
||||
@brief Error definitions for the SoC library
|
||||
|
||||
*/
|
||||
|
||||
/* Header guard */
|
||||
#ifndef NRF_ERROR_SOC_H__
|
||||
#define NRF_ERROR_SOC_H__
|
||||
|
||||
#include "nrf_error.h"
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Mutex Errors */
|
||||
#define NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN (NRF_ERROR_SOC_BASE_NUM + 0) ///< Mutex already taken
|
||||
|
||||
/* NVIC errors */
|
||||
#define NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE (NRF_ERROR_SOC_BASE_NUM + 1) ///< NVIC interrupt not available
|
||||
#define NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED (NRF_ERROR_SOC_BASE_NUM + 2) ///< NVIC interrupt priority not allowed
|
||||
#define NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 3) ///< NVIC should not return
|
||||
|
||||
/* Power errors */
|
||||
#define NRF_ERROR_SOC_POWER_MODE_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 4) ///< Power mode unknown
|
||||
#define NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 5) ///< Power POF threshold unknown
|
||||
#define NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 6) ///< Power off should not return
|
||||
|
||||
/* Rand errors */
|
||||
#define NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES (NRF_ERROR_SOC_BASE_NUM + 7) ///< RAND not enough values
|
||||
|
||||
/* PPI errors */
|
||||
#define NRF_ERROR_SOC_PPI_INVALID_CHANNEL (NRF_ERROR_SOC_BASE_NUM + 8) ///< Invalid PPI Channel
|
||||
#define NRF_ERROR_SOC_PPI_INVALID_GROUP (NRF_ERROR_SOC_BASE_NUM + 9) ///< Invalid PPI Group
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // NRF_ERROR_SOC_H__
|
||||
/**
|
||||
@}
|
||||
@}
|
||||
*/
|
||||
@ -0,0 +1,491 @@
|
||||
/*
|
||||
* Copyright (c) 2016 - 2018, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @defgroup nrf_nvic_api SoftDevice NVIC API
|
||||
* @{
|
||||
*
|
||||
* @note In order to use this module, the following code has to be added to a .c file:
|
||||
* \code
|
||||
* nrf_nvic_state_t nrf_nvic_state = {0};
|
||||
* \endcode
|
||||
*
|
||||
* @note Definitions and declarations starting with __ (double underscore) in this header file are
|
||||
* not intended for direct use by the application.
|
||||
*
|
||||
* @brief APIs for the accessing NVIC when using a SoftDevice.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef NRF_NVIC_H__
|
||||
#define NRF_NVIC_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf.h"
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "nrf_error_soc.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**@addtogroup NRF_NVIC_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/**@defgroup NRF_NVIC_ISER_DEFINES SoftDevice NVIC internal definitions
|
||||
* @{ */
|
||||
|
||||
#define __NRF_NVIC_NVMC_IRQn (30) /**< The peripheral ID of the NVMC. IRQ numbers are used to identify peripherals, but the NVMC doesn't have an IRQ number in the MDK. */
|
||||
|
||||
#define __NRF_NVIC_ISER_COUNT (2) /**< The number of ISER/ICER registers in the NVIC that are used. */
|
||||
|
||||
/**@brief Interrupt priority levels used by the SoftDevice. */
|
||||
#define __NRF_NVIC_SD_IRQ_PRIOS ((uint8_t)( \
|
||||
(1U << 0) /**< Priority level high .*/ \
|
||||
| (1U << 1) /**< Priority level medium. */ \
|
||||
| (1U << 4) /**< Priority level low. */ \
|
||||
))
|
||||
|
||||
/**@brief Interrupt priority levels available to the application. */
|
||||
#define __NRF_NVIC_APP_IRQ_PRIOS ((uint8_t)~__NRF_NVIC_SD_IRQ_PRIOS)
|
||||
|
||||
/**@brief Interrupts used by the SoftDevice, with IRQn in the range 0-31. */
|
||||
#define __NRF_NVIC_SD_IRQS_0 ((uint32_t)( \
|
||||
(1U << POWER_CLOCK_IRQn) \
|
||||
| (1U << RADIO_IRQn) \
|
||||
| (1U << RTC0_IRQn) \
|
||||
| (1U << TIMER0_IRQn) \
|
||||
| (1U << RNG_IRQn) \
|
||||
| (1U << ECB_IRQn) \
|
||||
| (1U << CCM_AAR_IRQn) \
|
||||
| (1U << TEMP_IRQn) \
|
||||
| (1U << __NRF_NVIC_NVMC_IRQn) \
|
||||
| (1U << (uint32_t)SWI5_IRQn) \
|
||||
))
|
||||
|
||||
/**@brief Interrupts used by the SoftDevice, with IRQn in the range 32-63. */
|
||||
#define __NRF_NVIC_SD_IRQS_1 ((uint32_t)0)
|
||||
|
||||
/**@brief Interrupts available for to application, with IRQn in the range 0-31. */
|
||||
#define __NRF_NVIC_APP_IRQS_0 (~__NRF_NVIC_SD_IRQS_0)
|
||||
|
||||
/**@brief Interrupts available for to application, with IRQn in the range 32-63. */
|
||||
#define __NRF_NVIC_APP_IRQS_1 (~__NRF_NVIC_SD_IRQS_1)
|
||||
|
||||
/**@} */
|
||||
|
||||
/**@} */
|
||||
|
||||
/**@addtogroup NRF_NVIC_VARIABLES Variables
|
||||
* @{ */
|
||||
|
||||
/**@brief Type representing the state struct for the SoftDevice NVIC module. */
|
||||
typedef struct
|
||||
{
|
||||
uint32_t volatile __irq_masks[__NRF_NVIC_ISER_COUNT]; /**< IRQs enabled by the application in the NVIC. */
|
||||
uint32_t volatile __cr_flag; /**< Non-zero if already in a critical region */
|
||||
} nrf_nvic_state_t;
|
||||
|
||||
/**@brief Variable keeping the state for the SoftDevice NVIC module. This must be declared in an
|
||||
* application source file. */
|
||||
extern nrf_nvic_state_t nrf_nvic_state;
|
||||
|
||||
/**@} */
|
||||
|
||||
/**@addtogroup NRF_NVIC_INTERNAL_FUNCTIONS SoftDevice NVIC internal functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Disables IRQ interrupts globally, including the SoftDevice's interrupts.
|
||||
*
|
||||
* @retval The value of PRIMASK prior to disabling the interrupts.
|
||||
*/
|
||||
__STATIC_INLINE int __sd_nvic_irq_disable(void);
|
||||
|
||||
/**@brief Enables IRQ interrupts globally, including the SoftDevice's interrupts.
|
||||
*/
|
||||
__STATIC_INLINE void __sd_nvic_irq_enable(void);
|
||||
|
||||
/**@brief Checks if IRQn is available to application
|
||||
* @param[in] IRQn IRQ to check
|
||||
*
|
||||
* @retval 1 (true) if the IRQ to check is available to the application
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn);
|
||||
|
||||
/**@brief Checks if priority is available to application
|
||||
* @param[in] priority priority to check
|
||||
*
|
||||
* @retval 1 (true) if the priority to check is available to the application
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __sd_nvic_is_app_accessible_priority(uint32_t priority);
|
||||
|
||||
/**@} */
|
||||
|
||||
/**@addtogroup NRF_NVIC_FUNCTIONS SoftDevice NVIC public functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Enable External Interrupt.
|
||||
* @note Corresponds to NVIC_EnableIRQ in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt was enabled.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn);
|
||||
|
||||
/**@brief Disable External Interrupt.
|
||||
* @note Corresponds to NVIC_DisableIRQ in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt was disabled.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn);
|
||||
|
||||
/**@brief Get Pending Interrupt.
|
||||
* @note Corresponds to NVIC_GetPendingIRQ in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_GetPendingIRQ documentation in CMSIS.
|
||||
* @param[out] p_pending_irq Return value from NVIC_GetPendingIRQ.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt is available for the application.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq);
|
||||
|
||||
/**@brief Set Pending Interrupt.
|
||||
* @note Corresponds to NVIC_SetPendingIRQ in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt is set pending.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn);
|
||||
|
||||
/**@brief Clear Pending Interrupt.
|
||||
* @note Corresponds to NVIC_ClearPendingIRQ in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt pending flag is cleared.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn);
|
||||
|
||||
/**@brief Set Interrupt Priority.
|
||||
* @note Corresponds to NVIC_SetPriority in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
* @pre Priority is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_SetPriority documentation in CMSIS.
|
||||
* @param[in] priority A valid IRQ priority for use by the application.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt and priority level is available for the application.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority);
|
||||
|
||||
/**@brief Get Interrupt Priority.
|
||||
* @note Corresponds to NVIC_GetPriority in CMSIS.
|
||||
*
|
||||
* @pre IRQn is valid and not reserved by the stack.
|
||||
*
|
||||
* @param[in] IRQn See the NVIC_GetPriority documentation in CMSIS.
|
||||
* @param[out] p_priority Return value from NVIC_GetPriority.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority.
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority);
|
||||
|
||||
/**@brief System Reset.
|
||||
* @note Corresponds to NVIC_SystemReset in CMSIS.
|
||||
*
|
||||
* @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_SystemReset(void);
|
||||
|
||||
/**@brief Enter critical region.
|
||||
*
|
||||
* @post Application interrupts will be disabled.
|
||||
* @note sd_nvic_critical_region_enter() and ::sd_nvic_critical_region_exit() must be called in matching pairs inside each
|
||||
* execution context
|
||||
* @sa sd_nvic_critical_region_exit
|
||||
*
|
||||
* @param[out] p_is_nested_critical_region If 1, the application is now in a nested critical region.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region);
|
||||
|
||||
/**@brief Exit critical region.
|
||||
*
|
||||
* @pre Application has entered a critical region using ::sd_nvic_critical_region_enter.
|
||||
* @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called.
|
||||
*
|
||||
* @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS
|
||||
*/
|
||||
__STATIC_INLINE uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region);
|
||||
|
||||
/**@} */
|
||||
|
||||
#ifndef SUPPRESS_INLINE_IMPLEMENTATION
|
||||
|
||||
__STATIC_INLINE int __sd_nvic_irq_disable(void)
|
||||
{
|
||||
int pm = __get_PRIMASK();
|
||||
__disable_irq();
|
||||
return pm;
|
||||
}
|
||||
|
||||
__STATIC_INLINE void __sd_nvic_irq_enable(void)
|
||||
{
|
||||
__enable_irq();
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn)
|
||||
{
|
||||
if (IRQn < 32)
|
||||
{
|
||||
return ((1UL<<IRQn) & __NRF_NVIC_APP_IRQS_0) != 0;
|
||||
}
|
||||
else if (IRQn < 64)
|
||||
{
|
||||
return ((1UL<<(IRQn-32)) & __NRF_NVIC_APP_IRQS_1) != 0;
|
||||
}
|
||||
else
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t __sd_nvic_is_app_accessible_priority(uint32_t priority)
|
||||
{
|
||||
if( (priority >= (1 << __NVIC_PRIO_BITS))
|
||||
|| (((1 << priority) & __NRF_NVIC_APP_IRQ_PRIOS) == 0)
|
||||
)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if (!__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
if (!__sd_nvic_is_app_accessible_priority(NVIC_GetPriority(IRQn)))
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED;
|
||||
}
|
||||
|
||||
if (nrf_nvic_state.__cr_flag)
|
||||
{
|
||||
nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] |= (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F));
|
||||
}
|
||||
else
|
||||
{
|
||||
NVIC_EnableIRQ(IRQn);
|
||||
}
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if (!__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
|
||||
if (nrf_nvic_state.__cr_flag)
|
||||
{
|
||||
nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] &= ~(1UL << ((uint32_t)(IRQn) & 0x1F));
|
||||
}
|
||||
else
|
||||
{
|
||||
NVIC_DisableIRQ(IRQn);
|
||||
}
|
||||
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq)
|
||||
{
|
||||
if (__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
*p_pending_irq = NVIC_GetPendingIRQ(IRQn);
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
else
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if (__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
NVIC_SetPendingIRQ(IRQn);
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
else
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if (__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
NVIC_ClearPendingIRQ(IRQn);
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
else
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority)
|
||||
{
|
||||
if (!__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
|
||||
if (!__sd_nvic_is_app_accessible_priority(priority))
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED;
|
||||
}
|
||||
|
||||
NVIC_SetPriority(IRQn, (uint32_t)priority);
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority)
|
||||
{
|
||||
if (__sd_nvic_app_accessible_irq(IRQn))
|
||||
{
|
||||
*p_priority = (NVIC_GetPriority(IRQn) & 0xFF);
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
else
|
||||
{
|
||||
return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
|
||||
}
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_SystemReset(void)
|
||||
{
|
||||
NVIC_SystemReset();
|
||||
return NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN;
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region)
|
||||
{
|
||||
int was_masked = __sd_nvic_irq_disable();
|
||||
if (!nrf_nvic_state.__cr_flag)
|
||||
{
|
||||
nrf_nvic_state.__cr_flag = 1;
|
||||
nrf_nvic_state.__irq_masks[0] = ( NVIC->ICER[0] & __NRF_NVIC_APP_IRQS_0 );
|
||||
NVIC->ICER[0] = __NRF_NVIC_APP_IRQS_0;
|
||||
nrf_nvic_state.__irq_masks[1] = ( NVIC->ICER[1] & __NRF_NVIC_APP_IRQS_1 );
|
||||
NVIC->ICER[1] = __NRF_NVIC_APP_IRQS_1;
|
||||
*p_is_nested_critical_region = 0;
|
||||
}
|
||||
else
|
||||
{
|
||||
*p_is_nested_critical_region = 1;
|
||||
}
|
||||
if (!was_masked)
|
||||
{
|
||||
__sd_nvic_irq_enable();
|
||||
}
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
|
||||
__STATIC_INLINE uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region)
|
||||
{
|
||||
if (nrf_nvic_state.__cr_flag && (is_nested_critical_region == 0))
|
||||
{
|
||||
int was_masked = __sd_nvic_irq_disable();
|
||||
NVIC->ISER[0] = nrf_nvic_state.__irq_masks[0];
|
||||
NVIC->ISER[1] = nrf_nvic_state.__irq_masks[1];
|
||||
nrf_nvic_state.__cr_flag = 0;
|
||||
if (!was_masked)
|
||||
{
|
||||
__sd_nvic_irq_enable();
|
||||
}
|
||||
}
|
||||
|
||||
return NRF_SUCCESS;
|
||||
}
|
||||
|
||||
#endif /* SUPPRESS_INLINE_IMPLEMENTATION */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // NRF_NVIC_H__
|
||||
|
||||
/**@} */
|
||||
@ -0,0 +1,371 @@
|
||||
/*
|
||||
* Copyright (c) 2015 - 2018, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/**
|
||||
@defgroup nrf_sdm_api SoftDevice Manager API
|
||||
@{
|
||||
|
||||
@brief APIs for SoftDevice management.
|
||||
|
||||
*/
|
||||
|
||||
#ifndef NRF_SDM_H__
|
||||
#define NRF_SDM_H__
|
||||
|
||||
#include <stdint.h>
|
||||
#include "nrf.h"
|
||||
#include "nrf_svc.h"
|
||||
#include "nrf_error.h"
|
||||
#include "nrf_error_sdm.h"
|
||||
#include "nrf_soc.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup NRF_SDM_DEFINES Defines
|
||||
* @{ */
|
||||
#ifdef NRFSOC_DOXYGEN
|
||||
/// Declared in nrf_mbr.h
|
||||
#define MBR_SIZE 0
|
||||
#warning test
|
||||
#endif
|
||||
|
||||
/** @brief The major version for the SoftDevice binary distributed with this header file. */
|
||||
#define SD_MAJOR_VERSION (7)
|
||||
|
||||
/** @brief The minor version for the SoftDevice binary distributed with this header file. */
|
||||
#define SD_MINOR_VERSION (0)
|
||||
|
||||
/** @brief The bugfix version for the SoftDevice binary distributed with this header file. */
|
||||
#define SD_BUGFIX_VERSION (1)
|
||||
|
||||
/** @brief The SoftDevice variant of this firmware. */
|
||||
#define SD_VARIANT_ID 140
|
||||
|
||||
/** @brief The full version number for the SoftDevice binary this header file was distributed
|
||||
* with, as a decimal number in the form Mmmmbbb, where:
|
||||
* - M is major version (one or more digits)
|
||||
* - mmm is minor version (three digits)
|
||||
* - bbb is bugfix version (three digits). */
|
||||
#define SD_VERSION (SD_MAJOR_VERSION * 1000000 + SD_MINOR_VERSION * 1000 + SD_BUGFIX_VERSION)
|
||||
|
||||
/** @brief SoftDevice Manager SVC Base number. */
|
||||
#define SDM_SVC_BASE 0x10
|
||||
|
||||
/** @brief SoftDevice unique string size in bytes. */
|
||||
#define SD_UNIQUE_STR_SIZE 20
|
||||
|
||||
/** @brief Invalid info field. Returned when an info field does not exist. */
|
||||
#define SDM_INFO_FIELD_INVALID (0)
|
||||
|
||||
/** @brief Defines the SoftDevice Information Structure location (address) as an offset from
|
||||
the start of the SoftDevice (without MBR)*/
|
||||
#define SOFTDEVICE_INFO_STRUCT_OFFSET (0x2000)
|
||||
|
||||
/** @brief Defines the absolute SoftDevice Information Structure location (address) when the
|
||||
* SoftDevice is installed just above the MBR (the usual case). */
|
||||
#define SOFTDEVICE_INFO_STRUCT_ADDRESS (SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE)
|
||||
|
||||
/** @brief Defines the offset for the SoftDevice Information Structure size value relative to the
|
||||
* SoftDevice base address. The size value is of type uint8_t. */
|
||||
#define SD_INFO_STRUCT_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET)
|
||||
|
||||
/** @brief Defines the offset for the SoftDevice size value relative to the SoftDevice base address.
|
||||
* The size value is of type uint32_t. */
|
||||
#define SD_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x08)
|
||||
|
||||
/** @brief Defines the offset for FWID value relative to the SoftDevice base address. The FWID value
|
||||
* is of type uint16_t. */
|
||||
#define SD_FWID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x0C)
|
||||
|
||||
/** @brief Defines the offset for the SoftDevice ID relative to the SoftDevice base address. The ID
|
||||
* is of type uint32_t. */
|
||||
#define SD_ID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x10)
|
||||
|
||||
/** @brief Defines the offset for the SoftDevice version relative to the SoftDevice base address in
|
||||
* the same format as @ref SD_VERSION, stored as an uint32_t. */
|
||||
#define SD_VERSION_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x14)
|
||||
|
||||
/** @brief Defines the offset for the SoftDevice unique string relative to the SoftDevice base address.
|
||||
* The SD_UNIQUE_STR is stored as an array of uint8_t. The size of array is @ref SD_UNIQUE_STR_SIZE.
|
||||
*/
|
||||
#define SD_UNIQUE_STR_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x18)
|
||||
|
||||
/** @brief Defines a macro for retrieving the actual SoftDevice Information Structure size value
|
||||
* from a given base address. Use @ref MBR_SIZE as the argument when the SoftDevice is
|
||||
* installed just above the MBR (the usual case). */
|
||||
#define SD_INFO_STRUCT_SIZE_GET(baseaddr) (*((uint8_t *) ((baseaddr) + SD_INFO_STRUCT_SIZE_OFFSET)))
|
||||
|
||||
/** @brief Defines a macro for retrieving the actual SoftDevice size value from a given base
|
||||
* address. Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above
|
||||
* the MBR (the usual case). */
|
||||
#define SD_SIZE_GET(baseaddr) (*((uint32_t *) ((baseaddr) + SD_SIZE_OFFSET)))
|
||||
|
||||
/** @brief Defines the amount of flash that is used by the SoftDevice.
|
||||
* Add @ref MBR_SIZE to find the first available flash address when the SoftDevice is installed
|
||||
* just above the MBR (the usual case).
|
||||
*/
|
||||
#define SD_FLASH_SIZE 0x26000
|
||||
|
||||
/** @brief Defines a macro for retrieving the actual FWID value from a given base address. Use
|
||||
* @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR (the usual
|
||||
* case). */
|
||||
#define SD_FWID_GET(baseaddr) (*((uint16_t *) ((baseaddr) + SD_FWID_OFFSET)))
|
||||
|
||||
/** @brief Defines a macro for retrieving the actual SoftDevice ID from a given base address. Use
|
||||
* @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR (the
|
||||
* usual case). */
|
||||
#define SD_ID_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_ID_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \
|
||||
? (*((uint32_t *) ((baseaddr) + SD_ID_OFFSET))) : SDM_INFO_FIELD_INVALID)
|
||||
|
||||
/** @brief Defines a macro for retrieving the actual SoftDevice version from a given base address.
|
||||
* Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR
|
||||
* (the usual case). */
|
||||
#define SD_VERSION_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_VERSION_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \
|
||||
? (*((uint32_t *) ((baseaddr) + SD_VERSION_OFFSET))) : SDM_INFO_FIELD_INVALID)
|
||||
|
||||
/** @brief Defines a macro for retrieving the address of SoftDevice unique str based on a given base address.
|
||||
* Use @ref MBR_SIZE as the argument when the SoftDevice is installed just above the MBR
|
||||
* (the usual case). */
|
||||
#define SD_UNIQUE_STR_ADDR_GET(baseaddr) ((SD_INFO_STRUCT_SIZE_GET(baseaddr) > (SD_UNIQUE_STR_OFFSET - SOFTDEVICE_INFO_STRUCT_OFFSET)) \
|
||||
? (((uint8_t *) ((baseaddr) + SD_UNIQUE_STR_OFFSET))) : SDM_INFO_FIELD_INVALID)
|
||||
|
||||
/**@defgroup NRF_FAULT_ID_RANGES Fault ID ranges
|
||||
* @{ */
|
||||
#define NRF_FAULT_ID_SD_RANGE_START 0x00000000 /**< SoftDevice ID range start. */
|
||||
#define NRF_FAULT_ID_APP_RANGE_START 0x00001000 /**< Application ID range start. */
|
||||
/**@} */
|
||||
|
||||
/**@defgroup NRF_FAULT_IDS Fault ID types
|
||||
* @{ */
|
||||
#define NRF_FAULT_ID_SD_ASSERT (NRF_FAULT_ID_SD_RANGE_START + 1) /**< SoftDevice assertion. The info parameter is reserved for future used. */
|
||||
#define NRF_FAULT_ID_APP_MEMACC (NRF_FAULT_ID_APP_RANGE_START + 1) /**< Application invalid memory access. The info parameter will contain 0x00000000,
|
||||
in case of SoftDevice RAM access violation. In case of SoftDevice peripheral
|
||||
register violation the info parameter will contain the sub-region number of
|
||||
PREGION[0], on whose address range the disallowed write access caused the
|
||||
memory access fault. */
|
||||
/**@} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_SDM_ENUMS Enumerations
|
||||
* @{ */
|
||||
|
||||
/**@brief nRF SoftDevice Manager API SVC numbers. */
|
||||
enum NRF_SD_SVCS
|
||||
{
|
||||
SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */
|
||||
SD_SOFTDEVICE_DISABLE, /**< ::sd_softdevice_disable */
|
||||
SD_SOFTDEVICE_IS_ENABLED, /**< ::sd_softdevice_is_enabled */
|
||||
SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, /**< ::sd_softdevice_vector_table_base_set */
|
||||
SVC_SDM_LAST /**< Placeholder for last SDM SVC */
|
||||
};
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_SDM_DEFINES Defines
|
||||
* @{ */
|
||||
|
||||
/**@defgroup NRF_CLOCK_LF_ACCURACY Clock accuracy
|
||||
* @{ */
|
||||
|
||||
#define NRF_CLOCK_LF_ACCURACY_250_PPM (0) /**< Default: 250 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_500_PPM (1) /**< 500 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_150_PPM (2) /**< 150 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_100_PPM (3) /**< 100 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_75_PPM (4) /**< 75 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_50_PPM (5) /**< 50 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_30_PPM (6) /**< 30 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_20_PPM (7) /**< 20 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_10_PPM (8) /**< 10 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_5_PPM (9) /**< 5 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_2_PPM (10) /**< 2 ppm */
|
||||
#define NRF_CLOCK_LF_ACCURACY_1_PPM (11) /**< 1 ppm */
|
||||
|
||||
/** @} */
|
||||
|
||||
/**@defgroup NRF_CLOCK_LF_SRC Possible LFCLK oscillator sources
|
||||
* @{ */
|
||||
|
||||
#define NRF_CLOCK_LF_SRC_RC (0) /**< LFCLK RC oscillator. */
|
||||
#define NRF_CLOCK_LF_SRC_XTAL (1) /**< LFCLK crystal oscillator. */
|
||||
#define NRF_CLOCK_LF_SRC_SYNTH (2) /**< LFCLK Synthesized from HFCLK. */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_SDM_TYPES Types
|
||||
* @{ */
|
||||
|
||||
/**@brief Type representing LFCLK oscillator source. */
|
||||
typedef struct
|
||||
{
|
||||
uint8_t source; /**< LF oscillator clock source, see @ref NRF_CLOCK_LF_SRC. */
|
||||
uint8_t rc_ctiv; /**< Only for ::NRF_CLOCK_LF_SRC_RC: Calibration timer interval in 1/4 second
|
||||
units (nRF52: 1-32).
|
||||
@note To avoid excessive clock drift, 0.5 degrees Celsius is the
|
||||
maximum temperature change allowed in one calibration timer
|
||||
interval. The interval should be selected to ensure this.
|
||||
|
||||
@note Must be 0 if source is not ::NRF_CLOCK_LF_SRC_RC. */
|
||||
uint8_t rc_temp_ctiv; /**< Only for ::NRF_CLOCK_LF_SRC_RC: How often (in number of calibration
|
||||
intervals) the RC oscillator shall be calibrated if the temperature
|
||||
hasn't changed.
|
||||
0: Always calibrate even if the temperature hasn't changed.
|
||||
1: Only calibrate if the temperature has changed (legacy - nRF51 only).
|
||||
2-33: Check the temperature and only calibrate if it has changed,
|
||||
however calibration will take place every rc_temp_ctiv
|
||||
intervals in any case.
|
||||
|
||||
@note Must be 0 if source is not ::NRF_CLOCK_LF_SRC_RC.
|
||||
|
||||
@note For nRF52, the application must ensure calibration at least once
|
||||
every 8 seconds to ensure +/-500 ppm clock stability. The
|
||||
recommended configuration for ::NRF_CLOCK_LF_SRC_RC on nRF52 is
|
||||
rc_ctiv=16 and rc_temp_ctiv=2. This will ensure calibration at
|
||||
least once every 8 seconds and for temperature changes of 0.5
|
||||
degrees Celsius every 4 seconds. See the Product Specification
|
||||
for the nRF52 device being used for more information.*/
|
||||
uint8_t accuracy; /**< External clock accuracy used in the LL to compute timing
|
||||
windows, see @ref NRF_CLOCK_LF_ACCURACY.*/
|
||||
} nrf_clock_lf_cfg_t;
|
||||
|
||||
/**@brief Fault Handler type.
|
||||
*
|
||||
* When certain unrecoverable errors occur within the application or SoftDevice the fault handler will be called back.
|
||||
* The protocol stack will be in an undefined state when this happens and the only way to recover will be to
|
||||
* perform a reset, using e.g. CMSIS NVIC_SystemReset().
|
||||
* If the application returns from the fault handler the SoftDevice will call NVIC_SystemReset().
|
||||
*
|
||||
* @note It is recommended to either perform a reset in the fault handler or to let the SoftDevice reset the device.
|
||||
* Otherwise SoC peripherals may behave in an undefined way. For example, the RADIO peripherial may
|
||||
* continously transmit packets.
|
||||
*
|
||||
* @note This callback is executed in HardFault context, thus SVC functions cannot be called from the fault callback.
|
||||
*
|
||||
* @param[in] id Fault identifier. See @ref NRF_FAULT_IDS.
|
||||
* @param[in] pc The program counter of the instruction that triggered the fault.
|
||||
* @param[in] info Optional additional information regarding the fault. Refer to each Fault identifier for details.
|
||||
*
|
||||
* @note When id is set to @ref NRF_FAULT_ID_APP_MEMACC, pc will contain the address of the instruction being executed at the time when
|
||||
* the fault is detected by the CPU. The CPU program counter may have advanced up to 2 instructions (no branching) after the one that triggered the fault.
|
||||
*/
|
||||
typedef void (*nrf_fault_handler_t)(uint32_t id, uint32_t pc, uint32_t info);
|
||||
|
||||
/** @} */
|
||||
|
||||
/** @addtogroup NRF_SDM_FUNCTIONS Functions
|
||||
* @{ */
|
||||
|
||||
/**@brief Enables the SoftDevice and by extension the protocol stack.
|
||||
*
|
||||
* @note Some care must be taken if a low frequency clock source is already running when calling this function:
|
||||
* If the LF clock has a different source then the one currently running, it will be stopped. Then, the new
|
||||
* clock source will be started.
|
||||
*
|
||||
* @note This function has no effect when returning with an error.
|
||||
*
|
||||
* @post If return code is ::NRF_SUCCESS
|
||||
* - SoC library and protocol stack APIs are made available.
|
||||
* - A portion of RAM will be unavailable (see relevant SDS documentation).
|
||||
* - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation).
|
||||
* - Interrupts will not arrive from protected peripherals or interrupts.
|
||||
* - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the SoftDevice.
|
||||
* - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation).
|
||||
* - Chosen low frequency clock source will be running.
|
||||
*
|
||||
* @param p_clock_lf_cfg Low frequency clock source and accuracy.
|
||||
If NULL the clock will be configured as an RC source with rc_ctiv = 16 and .rc_temp_ctiv = 2
|
||||
In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock.
|
||||
* @param fault_handler Callback to be invoked in case of fault, cannot be NULL.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS
|
||||
* @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied.
|
||||
* @retval ::NRF_ERROR_INVALID_STATE SoftDevice is already enabled, and the clock source and fault handler cannot be updated.
|
||||
* @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDevice interrupt is already enabled, or an enabled interrupt has an illegal priority level.
|
||||
* @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected.
|
||||
* @retval ::NRF_ERROR_INVALID_PARAM Invalid clock source configuration supplied in p_clock_lf_cfg.
|
||||
*/
|
||||
SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lf_cfg_t const * p_clock_lf_cfg, nrf_fault_handler_t fault_handler));
|
||||
|
||||
|
||||
/**@brief Disables the SoftDevice and by extension the protocol stack.
|
||||
*
|
||||
* Idempotent function to disable the SoftDevice.
|
||||
*
|
||||
* @post SoC library and protocol stack APIs are made unavailable.
|
||||
* @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest).
|
||||
* @post All peripherals used by the SoftDevice will be reset to default values.
|
||||
* @post All of RAM become available.
|
||||
* @post All interrupts are forwarded to the application.
|
||||
* @post LFCLK source chosen in ::sd_softdevice_enable will be left running.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS
|
||||
*/
|
||||
SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void));
|
||||
|
||||
/**@brief Check if the SoftDevice is enabled.
|
||||
*
|
||||
* @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0.
|
||||
*
|
||||
* @retval ::NRF_SUCCESS
|
||||
*/
|
||||
SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled));
|
||||
|
||||
/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice
|
||||
*
|
||||
* This function is only intended to be called when a bootloader is enabled.
|
||||
*
|
||||
* @param[in] address The base address of the interrupt vector table for forwarded interrupts.
|
||||
|
||||
* @retval ::NRF_SUCCESS
|
||||
*/
|
||||
SVCALL(SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, uint32_t, sd_softdevice_vector_table_base_set(uint32_t address));
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // NRF_SDM_H__
|
||||
|
||||
/**
|
||||
@}
|
||||
*/
|
||||
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,100 @@
|
||||
/*
|
||||
* Copyright (c) 2012 - 2019, Nordic Semiconductor ASA
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without modification,
|
||||
* are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice, this
|
||||
* list of conditions and the following disclaimer.
|
||||
*
|
||||
* 2. Redistributions in binary form, except as embedded into a Nordic
|
||||
* Semiconductor ASA integrated circuit in a product or a software update for
|
||||
* such product, must reproduce the above copyright notice, this list of
|
||||
* conditions and the following disclaimer in the documentation and/or other
|
||||
* materials provided with the distribution.
|
||||
*
|
||||
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
* contributors may be used to endorse or promote products derived from this
|
||||
* software without specific prior written permission.
|
||||
*
|
||||
* 4. This software, with or without modification, must only be used with a
|
||||
* Nordic Semiconductor ASA integrated circuit.
|
||||
*
|
||||
* 5. Any software provided in binary form under this license must not be reverse
|
||||
* engineered, decompiled, modified and/or disassembled.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#ifndef NRF_SVC__
|
||||
#define NRF_SVC__
|
||||
|
||||
#include "stdint.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @brief Supervisor call declaration.
|
||||
*
|
||||
* A call to a function marked with @ref SVCALL, will trigger a Supervisor Call (SVC) Exception.
|
||||
* The SVCs with SVC numbers 0x00-0x0F are forwared to the application. All other SVCs are handled by the SoftDevice.
|
||||
*
|
||||
* @param[in] number The SVC number to be used.
|
||||
* @param[in] return_type The return type of the SVC function.
|
||||
* @param[in] signature Function signature. The function can have at most four arguments.
|
||||
*/
|
||||
|
||||
#ifdef SVCALL_AS_NORMAL_FUNCTION
|
||||
#define SVCALL(number, return_type, signature) return_type signature
|
||||
#else
|
||||
|
||||
#ifndef SVCALL
|
||||
#if defined (__CC_ARM)
|
||||
#define SVCALL(number, return_type, signature) return_type __svc(number) signature
|
||||
#elif defined (__GNUC__)
|
||||
#ifdef __cplusplus
|
||||
#define GCC_CAST_CPP (uint16_t)
|
||||
#else
|
||||
#define GCC_CAST_CPP
|
||||
#endif
|
||||
#define SVCALL(number, return_type, signature) \
|
||||
_Pragma("GCC diagnostic push") \
|
||||
_Pragma("GCC diagnostic ignored \"-Wreturn-type\"") \
|
||||
__attribute__((naked)) \
|
||||
__attribute__((unused)) \
|
||||
static return_type signature \
|
||||
{ \
|
||||
__asm( \
|
||||
"svc %0\n" \
|
||||
"bx r14" : : "I" (GCC_CAST_CPP number) : "r0" \
|
||||
); \
|
||||
} \
|
||||
_Pragma("GCC diagnostic pop")
|
||||
|
||||
#elif defined (__ICCARM__)
|
||||
#define PRAGMA(x) _Pragma(#x)
|
||||
#define SVCALL(number, return_type, signature) \
|
||||
PRAGMA(swi_number = (number)) \
|
||||
__swi return_type signature;
|
||||
#else
|
||||
#define SVCALL(number, return_type, signature) return_type signature
|
||||
#endif
|
||||
#endif // SVCALL
|
||||
|
||||
#endif // SVCALL_AS_NORMAL_FUNCTION
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif // NRF_SVC__
|
||||
@ -0,0 +1,35 @@
|
||||
Copyright (c) 2007 - 2019, Nordic Semiconductor ASA
|
||||
All rights reserved.
|
||||
|
||||
Redistribution and use in source and binary forms, with or without modification,
|
||||
are permitted provided that the following conditions are met:
|
||||
|
||||
1. Redistributions of source code must retain the above copyright notice, this
|
||||
list of conditions and the following disclaimer.
|
||||
|
||||
2. Redistributions in binary form, except as embedded into a Nordic
|
||||
Semiconductor ASA integrated circuit in a product or a software update for
|
||||
such product, must reproduce the above copyright notice, this list of
|
||||
conditions and the following disclaimer in the documentation and/or other
|
||||
materials provided with the distribution.
|
||||
|
||||
3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
||||
contributors may be used to endorse or promote products derived from this
|
||||
software without specific prior written permission.
|
||||
|
||||
4. This software, with or without modification, must only be used with a
|
||||
Nordic Semiconductor ASA integrated circuit.
|
||||
|
||||
5. Any software provided in binary form under this license must not be reverse
|
||||
engineered, decompiled, modified and/or disassembled.
|
||||
|
||||
THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
||||
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||||
OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
||||
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
||||
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
||||
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
Binary file not shown.
Binary file not shown.
Loading…
Reference in New Issue
Block a user