djsundog
/
circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

SAMD: configurable brownout, separate the variables

This commit is contained in:
Radomir Dopieralski 2020-07-08 20:59:00 +02:00
parent 83a27edd20
commit e0733d153e
4 changed files with 16 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ports/atmel-samd/boards/pewpew10/mpconfigboard.h
View File

@ -44,4 +44,4 @@
#define DEFAULT_UART_BUS_RX (&pin_PA01)
#define DEFAULT_UART_BUS_TX (&pin_PA00)
#define BOARD_BROWNOUT_LEVEL (6)
#define SAMD21_BOD33_LEVEL (6)

3
ports/atmel-samd/boards/pewpew_m4/mpconfigboard.h
View File

@ -41,5 +41,4 @@
#define IGNORE_PIN_PB10 1
#define IGNORE_PIN_PB11 1
#define BOARD_BROWNOUT_LEVEL (6)
// 1.6V
#define SAMD5x_E5x_BOD33_LEVEL (100)

14
ports/atmel-samd/mpconfigport.h
View File

@ -112,8 +112,11 @@
#define CIRCUITPY_DEFAULT_STACK_SIZE 4096
#endif
#ifndef BOARD_BROWNOUT_LEVEL (
#define BOARD_BROWNLOUT_LEVEL (39)
#ifndef SAMD21_BOD33_LEVEL
// Set brownout detection to ~2.7V. Default from factory is 1.7V,
// which is too low for proper operation of external SPI flash chips
// (they are 2.7-3.6V).
#define SAMD21_BOD33_LEVEL (39)
// 2.77V with hysteresis off. Table 37.20 in datasheet.
#endif
@ -134,8 +137,11 @@
#define CIRCUITPY_DEFAULT_STACK_SIZE (24*1024)
#endif
#ifndef BOARD_BROWNOUT_LEVEL (
#define BOARD_BROWNLOUT_LEVEL (200)
#ifndef SAMD5x_E5x_BOD33_LEVEL
// Set brownout detection to ~2.7V. Default from factory is 1.7V,
// which is too low for proper operation of external SPI flash chips
// (they are 2.7-3.6V).
#define SAMD5x_E5x_BOD33_LEVEL (200)
// 2.7V: 1.5V + LEVEL * 6mV.
#endif

10
ports/atmel-samd/supervisor/port.c
View File

@ -206,11 +206,10 @@ static void rtc_init(void) {
safe_mode_t port_init(void) {
#if defined(SAMD21)
// Set brownout detection. Default from factory is 1.7V,
// which is too low for proper operation of external SPI flash chips (they are 2.7-3.6V).
// Set brownout detection.
// Disable while changing level.
SYSCTRL->BOD33.bit.ENABLE = 0;
SYSCTRL->BOD33.bit.LEVEL = BOARD_BROWNOUT_LEVEL;
SYSCTRL->BOD33.bit.LEVEL = SAMD21_BOD33_LEVEL;
SYSCTRL->BOD33.bit.ENABLE = 1;
#ifdef ENABLE_MICRO_TRACE_BUFFER
@ -225,11 +224,10 @@ safe_mode_t port_init(void) {
#endif
#if defined(SAM_D5X_E5X)
// Set brownout detection to ~2.7V. Default from factory is 1.7V,
// which is too low for proper operation of external SPI flash chips (they are 2.7-3.6V).
// Set brownout detection.
// Disable while changing level.
SUPC->BOD33.bit.ENABLE = 0;
SUPC->BOD33.bit.LEVEL = BOARD_BROWNOUT_LEVEL;
SUPC->BOD33.bit.LEVEL = SAMD5x_E5x_BOD33_LEVEL;
SUPC->BOD33.bit.ENABLE = 1;
// MPU (Memory Protection Unit) setup.