Rework build flags, prevent idf errors

ports/esp32s2/common-hal/microcontroller/Pin.c

@@ -98,6 +98,10 @@ void claim_pin(const mcu_pin_obj_t* pin) {
     #endif
 }
 
+void common_hal_mcu_pin_claim(const mcu_pin_obj_t* pin) {
+    claim_pin(pin);
+}
+
 bool pin_number_is_free(gpio_num_t pin_number) {
     #ifdef MICROPY_HW_NEOPIXEL
     if (pin_number == MICROPY_HW_NEOPIXEL->number) {

ports/esp32s2/common-hal/pulseio/PWMOut.c

@@ -39,13 +39,17 @@ STATIC bool never_reset_chan[LEDC_CHANNEL_MAX];
 
 void pwmout_reset(void) {
     for (size_t i = 0; i < LEDC_CHANNEL_MAX; i++ ) {
-        ledc_stop(LEDC_LOW_SPEED_MODE, i, 0);
+        if (reserved_channels[i] != INDEX_EMPTY) {
+            ledc_stop(LEDC_LOW_SPEED_MODE, i, 0);
+        }
         if (!never_reset_chan[i]) {
             reserved_channels[i] = INDEX_EMPTY;
         }
     }
     for (size_t i = 0; i < LEDC_TIMER_MAX; i++ ) {
-        ledc_timer_rst(LEDC_LOW_SPEED_MODE, i);
+        if (reserved_timer_freq[i]) {
+            ledc_timer_rst(LEDC_LOW_SPEED_MODE, i);
+        }
         if (!never_reset_tim[i]) {
             reserved_timer_freq[i] = 0;
         }
@@ -157,7 +161,10 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) {
     if (common_hal_pulseio_pwmout_deinited(self)) {
         return;
     }
-    ledc_stop(LEDC_LOW_SPEED_MODE, self->chan_handle.channel, 0);
+
+    if (reserved_channels[self->chan_handle.channel] != INDEX_EMPTY) {
+        ledc_stop(LEDC_LOW_SPEED_MODE, self->chan_handle.channel, 0);
+    }
     // Search if any other channel is using the timer
     bool taken = false;
     for (size_t i =0; i < LEDC_CHANNEL_MAX; i++) {
@@ -167,7 +174,9 @@ void common_hal_pulseio_pwmout_deinit(pulseio_pwmout_obj_t* self) {
     }
     // Variable frequency means there's only one channel on the timer
     if (!taken || self->variable_frequency) {
-        ledc_timer_rst(LEDC_LOW_SPEED_MODE, self->tim_handle.timer_num);
+        if (reserved_timer_freq[self->tim_handle.timer_num] != 0) {
+            ledc_timer_rst(LEDC_LOW_SPEED_MODE, self->tim_handle.timer_num);
+        }
         reserved_timer_freq[self->tim_handle.timer_num] = 0;
     }
     reset_pin_number(self->pin_number);

ports/esp32s2/mpconfigport.mk

@@ -14,26 +14,21 @@ LONGINT_IMPL = MPZ
 
 CIRCUITPY_NEOPIXEL_WRITE = 1
 
-CIRCUITPY_FULL_BUILD = 0
+# These modules are implemented in ports/<port>/common-hal:
 CIRCUITPY_ANALOGIO = 0
+CIRCUITPY_NVM = 0
 CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_AUDIOIO = 0
-CIRCUITPY_BITBANGIO = 1
-CIRCUITPY_BOARD = 1
-CIRCUITPY_DIGITALIO = 1
-CIRCUITPY_BUSIO = 1
-CIRCUITPY_DISPLAYIO = 1
-CIRCUITPY_FREQUENCYIO = 0
-CIRCUITPY_I2CPERIPHERAL = 0
-CIRCUITPY_MICROCONTROLLER = 1
-CIRCUITPY_NVM = 0
-CIRCUITPY_PULSEIO = 1
 CIRCUITPY_ROTARYIO = 0
 CIRCUITPY_RTC = 0
-CIRCUITPY_TOUCHIO = 0
+CIRCUITPY_FREQUENCYIO = 0
+CIRCUITPY_I2CPERIPHERAL = 0
+CIRCUITPY_COUNTIO = 0
 
-# Enable USB HID support
-CIRCUITPY_USB_HID = 1
-CIRCUITPY_USB_MIDI = 0
+# These modules are implemented in shared-module/ - they can be included in
+# any port once their prerequisites in common-hal are complete.
+CIRCUITPY_RANDOM = 0          # Requires OS
+CIRCUITPY_USB_MIDI = 0        # Requires USB
+CIRCUITPY_ULAB = 0            # No requirements, but takes extra flash
 
 CIRCUITPY_MODULE ?= none

ports/esp32s2/peripherals/rmt.c

@@ -42,4 +42,5 @@ rmt_channel_t esp32s2_peripherals_find_and_reserve_rmt(void) {
 
 void esp32s2_peripherals_free_rmt(rmt_channel_t chan) {
     rmt_reserved_channels[chan] = false;
+    rmt_driver_uninstall(chan);
 }

supervisor/shared/rgb_led_status.c

@@ -28,6 +28,7 @@
 #include "shared-bindings/microcontroller/Pin.h"
 #include "rgb_led_status.h"
 #include "supervisor/shared/tick.h"
+#include "py/obj.h"
 
 #ifdef MICROPY_HW_NEOPIXEL
 uint8_t rgb_status_brightness = 63;