3077 Commits

Author	SHA1	Message	Date
Hierophect	9b43d5ced4	Merge remote-tracking branch 'upstream/master' into stm32-blackpill	2019-12-05 14:25:39 -05:00
Hierophect	c53496a55e	remove redundant NOPs	2019-12-05 12:45:09 -05:00
Hierophect	f3f2c7f5de	change default phase for SPI	2019-12-05 11:38:20 -05:00
Scott Shawcroft	17c8356b8c	Add connection interval and debugging ... This also sets TinyUSB to master and to not include its submodules. It also fixes an old displayio example comment and retries gattc reads.	2019-12-04 14:39:02 -08:00
Scott Shawcroft	19dc219ff7	Merge pull request #2351 from hierophect/stm32-i2c-never-reset ... STM32: Add I2C never reset	2019-12-04 10:26:51 -08:00
Hierophect	3de1b9edbe	Merge remote-tracking branch 'upstream/master' into stm32-displayio	2019-12-04 10:50:14 -05:00
Jeff Epler	238e121236	protocols: Allow them to be (optionally) type-safe ... Protocols are nice, but there is no way for C code to verify whether a type's "protocol" structure actually implements some particular protocol. As a result, you can pass an object that implements the "vfs" protocol to one that expects the "stream" protocol, and the opposite of awesomeness ensues. This patch adds an OPTIONAL (but enabled by default) protocol identifier as the first member of any protocol structure. This identifier is simply a unique QSTR chosen by the protocol designer and used by each protocol implementer. When checking for protocol support, instead of just checking whether the object's type has a non-NULL protocol field, use `mp_proto_get` which implements the protocol check when possible. The existing protocols are now named: protocol_framebuf protocol_i2c protocol_pin protocol_stream protocol_spi protocol_vfs (most of these are unused in CP and are just inherited from MP; vfs and stream are definitely used though) I did not find any crashing examples, but here's one to give a flavor of what is improved, using `micropython_coverage`. Before the change, the vfs "ioctl" protocol is invoked, and the result is not intelligible as json (but it could have resulted in a hard fault, potentially): >>> import uos, ujson >>> u = uos.VfsPosix('/tmp') >>> ujson.load(u) Traceback (most recent call last): File "<stdin>", line 1, in <module> ValueError: syntax error in JSON After the change, the vfs object is correctly detected as not supporting the stream protocol: >>> ujson.load(p) Traceback (most recent call last): File "<stdin>", line 1, in <module> OSError: stream operation not supported	2019-12-04 09:29:57 -06:00
Hierophect	e6b45656f9	Add module and empty parallelbus	2019-12-03 17:18:42 -05:00
Hierophect	012b3bdf18	Add I2C never reset, SPI bugfix	2019-12-03 16:18:49 -05:00
Hierophect	45a6b03d40	copy from busted branch	2019-12-03 15:30:12 -05:00
Scott Shawcroft	fce81e6868	Merge pull request #2297 from jepler/tick-refactor ... Call background tasks only once per ms	2019-12-02 16:45:51 -08:00
Hierophect	12737e2821	remove F401 additions to streamline	2019-12-02 12:28:48 -05:00
Jeff Epler	002f5c0f1c	samd: trinket_m0: make board fit again	2019-12-02 08:25:48 -06:00
Jeff Epler	899202aca7	Merge branch 'master' into gcc9	2019-12-02 07:27:03 -06:00
Jeff Epler	95d9c49e43	Merge remote-tracking branch 'origin/master' into tick-refactor	2019-11-29 11:27:09 -06:00
Jeff Epler	d843156a5e	samd: Consolidate small build optimization flags ... .. inline-unit-growth was the same across all boards, and the highest max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's worth a little work to follow the DRY principle	2019-11-29 10:51:16 -06:00
Dan Halbert	dd6dfeb30a	Squeeze pyruler zh_Latn_pinyin	2019-11-27 14:47:35 -05:00
Dan Halbert	b32a9192df	make UART.write be blocking on SAMD; add timeout property	2019-11-27 13:05:29 -05:00
Scott Shawcroft	3fc58cee38	Merge remote-tracking branch 'adafruit/master' into support_extended_advertising	2019-11-26 13:12:43 -08:00
Dan Halbert	e560b419f8	Merge pull request #2325 from sarfata/sarfata/add-shirtty-master ... Add shIRtty board	2019-11-26 15:23:56 -05:00
Dan Halbert	97d90c6039	Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name ... Set USB_INTERFACE_NAME for winterbloom_sol	2019-11-26 15:17:14 -05:00
Thea Flowers	e77046d49b	Set USB_INTERFACE_NAME for winterbloom_sol	2019-11-26 10:59:12 -08:00
Thomas Sarlandie	2647ea0754	fix: disable touchio to save some space	2019-11-26 19:26:18 +01:00
Scott Shawcroft	58ad38a88e	Remove DotStar from pIRkey M0 for now to free up space ... Once we use PixelBuf, the library will be much smaller.	2019-11-26 09:31:44 -08:00
Jeff Epler	82f55dc046	atmel-samd: reduce inlining on constrained boards again ... pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0 now has just 76 bytes flash available.	2019-11-26 08:50:55 -06:00
Jeff Epler	3ed6de7baf	atmel-samd: reduce inlining on pyruler again ... By tweaking the optimizer flags further, this build also fits	2019-11-26 08:50:55 -06:00
Jeff Epler	2e4a6b94e7	atmel-samd: get most constrained m0 builds to work again ... By tweaking the optimizer flags, we can get back a few hundred bytes and allow these builds to work with the gcc9 compiler.	2019-11-26 08:50:45 -06:00
Scott Shawcroft	e5dd78d393	Merge pull request #2324 from jepler/nrf-i2s-channels-widths ... nrf: assign channel width and count correctly	2019-11-25 16:59:08 -08:00
Scott Shawcroft	2653455ded	Merge pull request #2321 from jepler/nrf-i2s-buglets ... Nrf i2s buglets	2019-11-25 16:11:43 -08:00
Thomas Sarlandie	11dc572bce	feature: our own PID - thanks @ladyada	2019-11-25 21:56:42 +01:00
Jeff Epler	1ee35fd6fd	nrf: i2sout: move register settings closer together ... .. just for consistency's sake	2019-11-25 11:43:51 -06:00
Jeff Epler	47a6eaa297	nrf: i2sout: Assign SWIDTH ... The sample width register was never set, so all samples were played as though they were 16 bit. After this change, 8-bit samples no longer produce audio on the MAX 98357A BOB, because only 16-, 24-, and 32-bit samples are supported by the hardware. This will be addressed by a future change to pad samples to 16 bits; see #2323 and the 98357A datasheet page 6.	2019-11-25 11:43:29 -06:00
Jeff Epler	8f4bab2d24	i2sout: Correctly retrieve channel_count ... The meaning of the "single channel" parameter is not well-documented, but in fact it seems that "true" must be passed or else the returned channel_count is always 1. This caused stereo samples to be played incorrectly.	2019-11-25 10:59:59 -06:00
Thomas Sarlandie	fc71ed9789	add shirtty board - hackaday supercon 2019 addon	2019-11-25 17:44:41 +01:00
Dan Halbert	d154d11911	Merge pull request #2320 from jepler/nrf-unsigned-audio-crash ... nrf: i2sout: Fix double-increment when copying samples	2019-11-25 11:42:16 -05:00
Jeff Epler	c9946dfd63	nrf: i2sout: Use <, not !=, for loop condition ... This is good C style, h/t @danh	2019-11-25 09:35:57 -06:00
Jeff Epler	19d122e546	nrf: i2sout: Fix double-increment when copying samples ... This caused two problems when playing unsigned samples: * When an even number of samples were present, it "worked" but only every other sample was copied into the output, changing the waveform * When an odd number of samples were present, the copy continued beyond the end of the buffers and caused a hard fault	2019-11-25 09:07:20 -06:00
Dan Halbert	1ccb7b4c5e	cosmetic commit, mostly to re-run	2019-11-22 16:30:10 -05:00
Dan Halbert	13375d16f1	change mpconfigport.mk files so they can be overriden by mpconfigboard.mk	2019-11-22 15:44:51 -05:00
Jeff Epler	bfdfe0e681	stm32: fix uses of ticks_ms global	2019-11-22 14:30:08 -06:00
Jeff Epler	77b78d7fb9	Merge remote-tracking branch 'origin/master' into tick-refactor	2019-11-22 14:28:51 -06:00
Jeff Epler	1c6c9a3e1f	nrf: i2sout: Ensure hardware I2S is stopped at deinit ... .. otherwise, it may be possible under some scenario, for the background task to continue and overwrite unrelated memory.	2019-11-22 14:15:07 -06:00
Dan Halbert	e18d3e0f76	Merge branch 'master' into m4-network-ps2io	2019-11-22 15:02:52 -05:00
Jeff Epler	aabb56c840	nrf: i2sout: Only update hold_value when appropriate ... If we put no samples into the buffer, then there is no last sample to fill out hold_value with. (and, in fact, the expression such as *(uint32_t*)(buffer-4) is outside an allocated region) Detect this condition, and leave the prior value in place. This improves clicks heard when pausing and resuming a waveform.	2019-11-22 13:54:37 -06:00
Dan Halbert	1a62a9cb17	remove network from kicksat_sprite	2019-11-22 14:02:44 -05:00
Dan Halbert	2e9aa38700	turn off network in pewpew_m4	2019-11-22 13:49:33 -05:00
Dan Halbert	1d411d2874	Merge remote-tracking branch 'adafruit/master' into testing-fixes	2019-11-22 11:55:34 -05:00
Hierophect	352bd95f5a	remove blackpill	2019-11-22 11:19:39 -05:00
Dan Halbert	228a619af5	enable network, wiznet5k, and ps2io by default on M4	2019-11-22 10:59:27 -05:00
Hierophect	0d8eb3cfb4	add correct VID/PID pairs	2019-11-22 10:54:35 -05:00
Hierophect	6a7c8d6341	minor fix	2019-11-21 20:56:05 -05:00
Scott Shawcroft	743bc829ab	Clean up debug changes	2019-11-21 16:39:57 -08:00
Scott Shawcroft	e63796c7bc	Special exception message for when pairing prompt is ignored.	2019-11-21 16:32:42 -08:00
Scott Shawcroft	39f4046f70	Fix pairing when peripheral. Central untested.	2019-11-21 16:32:42 -08:00
Hierophect	b5ff9684bb	remove misplaced status LED definitions	2019-11-21 17:09:28 -05:00
Hierophect	4e4ecafd97	Add definitions for PYB Nano and blackpill	2019-11-21 16:53:06 -05:00
Dan Halbert	2adecda5eb	Merge pull request #2311 from tannewt/redo_bleio_errors ... Use BluetoothError in _bleio	2019-11-21 16:44:26 -05:00
Dan Halbert	e06dc72359	Merge pull request #2307 from hierophect/stm32-spi-cleanup ... STM32: SPI clock rate fix and cleanup	2019-11-21 16:12:06 -05:00
Hierophect	a96317d566	requested style changes	2019-11-21 14:30:07 -05:00
Hierophect	13d786b2ef	added pin defs	2019-11-21 14:27:59 -05:00
Scott Shawcroft	5e857fdb67	Use BluetoothError in _bleio ... This better differentiates errors than using OSError everywhere.	2019-11-20 14:02:15 -08:00
Hierophect	006182f4e8	Remove meowbit for now	2019-11-20 15:56:00 -05:00
Hierophect	d8d95d9998	Minor meowbit changes	2019-11-20 15:55:13 -05:00
Hierophect	cf4a3237e7	Merge remote-tracking branch 'upstream/master' into stm32-meowbit-etc	2019-11-20 15:31:55 -05:00
Hierophect	9764006f81	add F401 pin definition	2019-11-20 15:30:31 -05:00
Hierophect	3d1b6d9fc8	fix typo	2019-11-20 12:07:12 -05:00
Hierophect	bd9893ab98	clean up SPI module readability	2019-11-20 12:00:45 -05:00
Hierophect	0b558e8714	fix error in SPI busclock selection	2019-11-20 11:34:49 -05:00
wallarug	fce7b89087	removed Robo HAT MM1 M0 board.	2019-11-20 21:34:24 +11:00
Scott Shawcroft	11c2c3443f	Add support for extended (>31 byte) BLE advertisements.	2019-11-19 13:55:58 -08:00
ndgarage	b3d7467719	add-ndbit6	2019-11-19 14:52:09 -07:00
Dan Halbert	1a22d8a0f2	Merge pull request #2291 from hierophect/stm32-neopixel ... STM32: Neopixel support	2019-11-18 23:45:09 -05:00
Hierophect	4a25c2344e	implement os urandom	2019-11-18 18:27:25 -05:00
Hierophect	256abf5505	Add board folders	2019-11-18 16:13:27 -05:00
Hierophect	a4797327cd	add microcontroller toggles for status LED	2019-11-18 13:51:59 -05:00
Jeff Epler	40a47d41df	samd: background: Allow monitoring time taken in background task ... If you define MONITOR_BACKGROUND_TASK, then a physical output pin (Metro M4 Express's "SCL" pin by default) will be set HIGH while in the background task and LOW at other times	2019-11-18 11:01:24 -06:00
Jeff Epler	7f744a2369	Supervisor: move most of systick to the supervisor ... This code is shared by most parts, except where not all the #ifdefs inside the tick function were present in all ports. This mostly would have broken gamepad tick support on non-samd ports. The "ms32" and "ms64" variants of the tick functions are introduced because there is no 64-bit atomic read. Disabling interrupts avoids a low probability bug where milliseconds could be off by ~49.5 days once every ~49.5 days (2^32 ms). Avoiding disabling interrupts when only the low 32 bits are needed is a minor optimization. Testing performed: on metro m4 express, USB still works and time.monotonic_ns() still counts up	2019-11-18 11:01:23 -06:00
Cedar Grove Maker Studios	e7df288a34	add USB interface description ... ... to "StringCarM0Ex"	2019-11-16 16:40:40 -08:00
Hierophect	51078cc38f	timing tweaks with testing	2019-11-15 17:17:05 -05:00
Hierophect	98fd372d5b	Add missing define	2019-11-15 13:19:37 -05:00
Hierophect	ee1559b921	Merge branch 'pin-commonhal-additions' into stm32-neopixel	2019-11-15 13:09:59 -05:00
Hierophect	81223c76bd	revert error	2019-11-15 13:04:25 -05:00
Hierophect	5f290d091e	Merge branch 'pin-commonhal-additions' into stm32-neopixel	2019-11-15 13:00:11 -05:00
Hierophect	2c6781f74d	move neopixel_in_use flag to shared-bindings	2019-11-15 12:59:52 -05:00
Hierophect	e1579a1cc5	Merge branch 'pin-commonhal-additions' into stm32-neopixel	2019-11-15 12:47:23 -05:00
Hierophect	de5691acf5	Add never_reset and reset to pin common hal, adjust files	2019-11-15 12:47:00 -05:00
Hierophect	6cce2d6d14	Implement Neopixel write, add defaults to f405	2019-11-15 12:28:16 -05:00
KalbeAbbas	8134ceec83	Update pins.c	2019-11-14 23:16:55 +05:00
KalbeAbbas	799770926b	Update pins.c	2019-11-14 18:51:01 +05:00
KalbeAbbas	949f87fd25	Update pins.c	2019-11-14 18:50:26 +05:00
KalbeAbbas	3db7f2798f	updated	2019-11-14 16:34:08 +05:00
Hierophect	6e96b1945e	Raise clock speed, adjust divisors	2019-11-13 13:18:43 -05:00
Dan Halbert	166518fc9b	Merge pull request #2272 from hierophect/stm32-microcontroller-fillout ... STM32: add us delay	2019-11-12 18:03:55 -05:00
Hierophect	e40bd07fcf	fix conflicting definitions on discovery boards	2019-11-12 13:03:13 -05:00
Hierophect	bbc366b85b	Style overhaul, extra error checks	2019-11-12 11:26:14 -05:00
Hierophect	ed3e377390	Merge remote-tracking branch 'upstream/master' into stm32-uart	2019-11-12 09:49:17 -05:00
☒ Bjarke Gotfredsen	d745c1023e	Support for XinaBox CC03 and CS11 ... CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. https://xinabox.cc/products/cc03 https://xinabox.cc/products/cs11	2019-11-12 12:48:31 +02:00
Hierophect	14b70806a5	de-init check	2019-11-11 15:47:47 -05:00
Hierophect	e076f14ea3	text fixes	2019-11-11 15:32:47 -05:00
Hierophect	c38086fc4a	fix typo	2019-11-11 15:04:22 -05:00
Hierophect	3f8b4727f5	Revise us delay to include interrupt/non-interrupt versions	2019-11-11 14:58:45 -05:00
Dan Halbert	91156670e9	Merge pull request #2271 from theacodes/enable-micropython-native ... Allow boards to enable the `micropython.native` decorator	2019-11-08 13:42:17 -05:00
Hierophect	d42c4b082d	revert sublime being a dumb	2019-11-06 14:55:16 -05:00
Hierophect	39dbcb529a	revert git being a dumb	2019-11-06 14:54:07 -05:00
Hierophect	adfef8b520	Merge remote-tracking branch 'upstream/master' into stm32-dac-deinit	2019-11-06 14:46:56 -05:00
Dan Halbert	b8373aca0c	Merge pull request #2266 from hierophect/stm32-defaults ... STM32: Add board defaults	2019-11-06 14:29:29 -05:00
Thea Flowers	c7195c4bc5	Allow boards to enable the micropython.native decorator ... Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables the `micropython.native` decorator.	2019-11-05 14:27:53 -08:00
Hierophect	e66fcb5e1f	add missing newline	2019-11-05 16:32:34 -05:00
Hierophect	8a098c154d	Fix unsaved file	2019-11-05 16:25:30 -05:00
Hierophect	1a7060af25	Add us delay	2019-11-05 16:23:59 -05:00
Joe Bakalor	ba83a4a2ac	Merge pull request #1 from adafruit/master ... Update base	2019-11-05 11:06:18 -05:00
Hierophect	0b85c4bb20	Merge remote-tracking branch 'upstream/master' into stm32-uart	2019-11-05 10:56:57 -05:00
JoeBakalor	8ab3ef44dd	add bluebird template files	2019-11-05 10:52:25 -05:00
Hierophect	dfe73a063d	Fix error that would carry past python exception	2019-11-05 10:50:57 -05:00
Thea Flowers	73989dbcaf	Add board configuration for Winterbloom Sol	2019-11-04 23:11:42 -08:00
Dan Halbert	8cd2f87e99	Merge pull request #2236 from tannewt/bleio_tweaks ... Refine _bleio	2019-11-04 22:27:54 -05:00
Dan Halbert	c87d6cc6a5	Merge pull request #2248 from hierophect/stm32-PWM ... STM32: PWMOut	2019-11-04 22:08:01 -05:00
Dan Halbert	f185b30d71	Update PWMOut.h	2019-11-04 20:41:54 -05:00
Hierophect	38e38b9f8d	remove redundant comment	2019-11-04 17:20:10 -05:00
Hierophect	632b3267dc	Add auto-shutoff of DAC when channels de-inited	2019-11-04 17:08:00 -05:00
Hierophect	40f920fbdf	complete attribution edits	2019-11-04 14:39:41 -05:00
Hierophect	ca1eb4def1	Add other board globals	2019-11-04 14:35:23 -05:00
Hierophect	2111a7c4cf	Merge branch 'master' into stm32-defaults	2019-11-04 14:32:00 -05:00
Hierophect	3526fed611	add board global	2019-11-04 14:31:57 -05:00
Hierophect	15d8d88950	Add default defines	2019-11-04 14:15:26 -05:00
Hierophect	ccff7e70ca	Style changes and refactors	2019-11-04 11:30:49 -05:00
Dan Halbert	e3638ffaad	Merge pull request #2262 from jepler/cpb-speaker-disable ... cpb: Disable the onboard speaker until request	2019-11-03 18:34:29 -05:00
Hierophect	1c4f49bb83	attribution changes	2019-11-03 16:33:01 -05:00
Scott Shawcroft	cd3fcc87ab	Merge pull request #2252 from dhalbert/cpb-two-i2c ... nrf: allocate two I2C on CPB	2019-11-03 13:15:36 -08:00
Dan Halbert	85a648224f	Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices	2019-11-02 22:47:03 -04:00
jepler	2bdccf03a7	cpb: define the SPEAKER_ENABLE_PIN ... This allows the board to disable the onboard speaker until explicitly enabled in user code. Testing performed on a CPB: * Touching the AUDIO pin with a fingertip no longer generates noise/buzz * Generating a waveform with `simpleio.tone` produces no sound by default * When the board.SPEAKER_ENABLE is configured as a digital output and set True, `simpleio.tone` does produce sound Note that while guides should include information about SPEAKER_ENABLE, it's possible that some users who omitted it could view this as a breaking change. They can fix it by simply adding code similar to speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE) speaker_enable.direction = digitalio.Direction.OUTPUT speaker_enable.value = True before using the internal speaker. Closes: #2258	2019-11-01 16:26:03 -05:00
jepler	fe47eba97f	nRF: Handle SPEAKER_ENABLE_PIN ... .. the existing code, which was never activated by the preprocessor, wasn't quite right.	2019-11-01 16:23:35 -05:00
Hierophect	8d0cc71aee	Add write protections, fix edge case read halt	2019-11-01 17:00:01 -04:00
Scott Shawcroft	47e50e5659	Merge remote-tracking branch 'adafruit/master' into bleio_tweaks	2019-11-01 13:20:58 -07:00
Hierophect	e605ce6317	Debugging additions	2019-11-01 14:30:28 -04:00
Hierophect	0a1a12b867	Revise PWM period generation algorithm to match other ports	2019-10-31 16:59:44 -04:00
brentru	2f04c5891f	flip it around	2019-10-31 14:11:50 -04:00
brentru	ab3da3071c	flip MADCTL BGR bit to reflect RGB colors	2019-10-31 10:11:47 -04:00
Hierophect	c78d79938d	remove debug output	2019-10-30 17:07:16 -04:00
Hierophect	a8070a4185	Revise IRQ managment, add restart on failure	2019-10-30 16:59:53 -04:00
Hierophect	bb8046dbb3	remove debug messages	2019-10-30 10:00:50 -04:00
ladyada	d2b613134d	we should use native rotation, and tweak madctl (not done yet)	2019-10-29 22:53:44 -04:00
ladyada	1e869d1334	switch to 8-bit mode - tested on hardware!	2019-10-29 21:14:45 -04:00
Hierophect	6b0cb87cbf	Dynamic prescaler adjustment, adjust pulse resolution	2019-10-29 17:17:26 -04:00
Hierophect	4de5a33a43	Style changes	2019-10-29 10:24:26 -04:00
Hierophect	33deb6752b	Add harder resets to UART	2019-10-29 09:41:52 -04:00
Dan Halbert	e35eb08f1d	nrf: allocate two I2C on CPB	2019-10-28 21:08:53 -04:00
Dan Halbert	1505da784f	wip	2019-10-28 18:15:02 -04:00
Dan Halbert	56ac41fabf	Merge pull request #2240 from theacodes/fix-2086 ... Track unadjusted PWM duty cycle to avoid accumulating conversion errors	2019-10-28 14:50:01 -04:00
Hierophect	3034cfc82f	Merge remote-tracking branch 'upstream/master' into stm32-uart	2019-10-28 12:16:01 -04:00
Hierophect	69bf926211	Merge remote-tracking branch 'upstream/master' into stm32-PWM	2019-10-28 12:01:28 -04:00
Dan Halbert	1d7d9043c1	CXD56 is a better platform name	2019-10-28 10:47:09 -04:00
Dan Halbert	358920db0e	Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only	2019-10-28 10:40:10 -04:00
Hierophect	c0f1ce590e	Add support across dev boards	2019-10-27 20:17:10 -04:00
Hierophect	7fd5e9b867	Fix issue with changing frequency	2019-10-27 19:41:01 -04:00
Hierophect	0cd8c3d5a8	Add all basic functions, never reset, dynamic pulse changes	2019-10-27 19:17:01 -04:00
Jeff Epler	1103490223	Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express ... Initial Itsy nRF52840 defn	2019-10-27 16:46:28 -05:00
Hierophect	cb491e855c	WIP	2019-10-27 14:31:25 -04:00
Dan Halbert	76817eaa10	Merge remote-tracking branch 'adafruit/master' into nano-33-ble	2019-10-25 22:41:26 -04:00
Dan Halbert	ab6fd34828	add object types to rgb status objects;mark spi rgb objects as never_reset	2019-10-25 22:32:43 -04:00
Dan Halbert	7d04d9109e	use bitbang SPI for DotStar; still need to fix hw SPI for dotstar	2019-10-25 15:37:27 -04:00
Thea Flowers	4b742f88d9	Fix spelling	2019-10-25 10:50:27 -07:00
Dan Halbert	cdeb0857a9	Initial Itsy nRF52840 defn	2019-10-25 11:15:34 -04:00
Hierophect	cf7efee0d3	Add f405 pindefs	2019-10-24 18:00:50 -04:00
Hierophect	7f769580bd	Merge remote-tracking branch 'upstream/master' into stm32-PWM	2019-10-24 14:11:51 -04:00
hierophect	3683ee3ffa	Merge pull request #2243 from hierophect/f405-rename-and-fixes ... STM32: rename feather_stm32f405_express, fix makefile defs issue	2019-10-24 14:11:17 -04:00
Hierophect	511071e1ba	Rename feather across folders and config, fix makefile def issue	2019-10-24 12:51:40 -04:00
Hierophect	64337775f8	PWM Base functionality testing for F405	2019-10-24 12:43:34 -04:00
Thea Flowers	4fdf518251	Track unadjusted PWM duty cycle to avoid accumulating conversion errors ... Fixes #2086 When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as well, since the registers have to be re-calculated based on the new frequency. Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle` will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified without the calling code also re-setting the duty cycle then the duty cycle will decay over time. This fixes that problem by tracking the unadjusted duty cycle and re-setting the duty cycle to that value when the frequency is changed.	2019-10-23 14:34:14 -07:00
ProductDev	4cd5571203	Adds builds for sparkfun_qwiic_micro with and without flash	2019-10-23 15:05:46 -06:00
Dan Halbert	af1fab1915	Merge pull request #2226 from kamtom480/circuitpython-device-open ... Do not open the same PWM device if it is already open	2019-10-23 15:08:40 -04:00
Scott Shawcroft	91c9d519ae	Refine comments and switch prefix_len to size_t	2019-10-22 23:09:56 -07:00
Hierophect	1d8a75fa3f	minor WIP	2019-10-22 13:11:45 -04:00
Hierophect	ca4b7f81e5	Initial template setup	2019-10-22 11:09:46 -04:00
Scott Shawcroft	ae30a1e5aa	Refine _bleio ... This PR refines the _bleio API. It was originally motivated by the addition of a new CircuitPython service that enables reading and modifying files on the device. Moving the BLE lifecycle outside of the VM motivated a number of changes to remove heap allocations in some APIs. It also motivated unifying connection initiation to the Adapter class rather than the Central and Peripheral classes which have been removed. Adapter now handles the GAP portion of BLE including advertising, which has moved but is largely unchanged, and scanning, which has been enhanced to return an iterator of filtered results. Once a connection is created (either by us (aka Central) or a remote device (aka Peripheral)) it is represented by a new Connection class. This class knows the current connection state and can discover and instantiate remote Services along with their Characteristics and Descriptors. Relates to #586	2019-10-21 18:57:03 -07:00
Hierophect	a596213526	non-functional WIP	2019-10-21 17:06:40 -04:00
Kamil Tomaszewski	e4574fa3bf	Clean UART on reset	2019-10-21 13:17:51 +02:00
Dan Halbert	7b79ac3739	Parameterize linker script	2019-10-20 23:50:12 -04:00
Hierophect	af28474b06	IRQ priority and port clearing scratchwork	2019-10-18 14:10:41 -04:00
Kamil Tomaszewski	e2cb29f2a0	Change default stack size to 64kiB for Spresense	2019-10-18 15:43:06 +02:00
Kamil Tomaszewski	3ad13e14d8	Do not open the same UART device again	2019-10-18 12:39:52 +02:00
Kamil Tomaszewski	b39ca3f8be	Do not open the same PWM device again	2019-10-18 12:39:22 +02:00
Kamil Tomaszewski	1decd111d5	Do not open the same ADC device again	2019-10-18 12:38:39 +02:00
Kamil Tomaszewski	4338511b28	Add get top and limit functions for Spresense	2019-10-18 11:10:22 +02:00
Kamil Tomaszewski	96756b3945	Add functions to get top and limit stack	2019-10-18 11:04:45 +02:00
Kamil Tomaszewski	30c9ad2b2a	Update Spresense SDK to 1.4.1	2019-10-18 10:29:32 +02:00
wallarug	8f2e5990db	Changed to follow standard that Pad 0 is always TX	2019-10-17 18:02:05 +11:00
Hierophect	14c64159c8	Implement requested changes, refactors	2019-10-16 13:50:54 -04:00
Hierophect	323fe418f7	Add support for other F4 MCUs	2019-10-16 13:14:57 -04:00
Hierophect	552900f18e	Merge remote-tracking branch 'upstream/master' into stm32-uart	2019-10-16 12:33:31 -04:00
Hierophect	b4a6246e30	Cleanup	2019-10-16 12:32:34 -04:00
Hierophect	14eefaafee	Hack in interrupt support	2019-10-16 11:33:55 -04:00
Dan Halbert	be8136dc6d	Merge remote-tracking branch 'adafruit/master' into bonding1	2019-10-15 15:55:21 -04:00
Scott Shawcroft	63790f01f8	Merge pull request #2218 from CedarGroveStudios/master ... Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip	2019-10-15 09:46:39 -07:00
Scott Shawcroft	6f2e2faff2	Merge pull request #2214 from dhalbert/remove-unused-ports ... Remove non-CircuitPython ports	2019-10-15 09:45:53 -07:00
Dan Halbert	a0d18ac4e6	add dummy common_hal_mcu_processor_get_voltage() for spresense	2019-10-15 09:07:12 -04:00
Dan Halbert	eca73436c9	Merge remote-tracking branch 'adafruit/master' into cpu-voltage	2019-10-15 09:03:24 -04:00
Dan Halbert	fdd7ebef2d	change calibration from analogin_reset() to analogin_init()	2019-10-14 23:38:41 -04:00
Scott Shawcroft	1a7c787d3c	Merge branch 'master' into master	2019-10-14 19:47:46 -07:00
Dan Halbert	615ec7f74d	merge from upstream	2019-10-14 18:12:58 -04:00
Scott Shawcroft	51582abc87	Merge pull request #2207 from kamtom480/circuitpython-spresense ... Add Spresense board	2019-10-14 14:19:09 -07:00
Cedar Grove Maker Studios	bd608e0807	remove placeholder	2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios	b04a218bbc	initial load of stringcar m0 express defs	2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios	44ebc4c95d	establish stringcar m0 express definitions	2019-10-14 11:55:22 -07:00
Kamil Tomaszewski	b750ed3a0f	Change Spresense firmware download link	2019-10-14 08:42:10 +02:00
Kamil Tomaszewski	8dfc8b584f	Change Spresense reference_voltage to 0.0 (None)	2019-10-14 08:22:14 +02:00
Dan Halbert	9c8f969b34	remove ports/zephyr	2019-10-13 11:09:55 -04:00
Dan Halbert	0bed5f490a	remove ports/windows	2019-10-13 11:09:43 -04:00
Dan Halbert	8f792127da	remove ports/teensy	2019-10-13 11:09:03 -04:00
Dan Halbert	fc033bd954	remove ports/stm32	2019-10-13 11:08:52 -04:00
Dan Halbert	7bc02ad3ba	remove ports/qemu-arm	2019-10-13 11:08:35 -04:00
Dan Halbert	6dcaeae8c7	remove ports/pic16bit	2019-10-13 11:08:08 -04:00
Dan Halbert	c575cd7bc7	remove ports/minimal	2019-10-13 11:07:40 -04:00
Dan Halbert	7692e06230	remove ports/esp8266	2019-10-13 11:07:07 -04:00
Dan Halbert	41ef2ab591	remove ports/esp32	2019-10-13 11:06:54 -04:00
Dan Halbert	b0d656683b	remove ports/cc3200	2019-10-13 11:06:33 -04:00
Dan Halbert	3d17e1d418	remove ports/bare-arm	2019-10-13 11:06:17 -04:00
Dan Halbert	c1ab2486f9	return chip vcc value	2019-10-12 15:42:15 -04:00
Jeff Epler	fae6e29546	nrf: PWMAudioOut: deactivate PWM when deinitting self ... .. otherwise, when an AudioPWMOut object was deinitted without being explicitly stop()ped, it would use up a slot in active_audio[]; the 5th iteration would create a non-working audio object which would just buzz instead of playing the right thing. Closes: #2203	2019-10-12 14:01:35 +09:00
Jeff Epler	ef459326cb	nrf: PWMAudioOut: coding style	2019-10-12 13:57:31 +09:00
Hierophect	1140ff5cd5	WIP	2019-10-11 15:47:55 -04:00
Kamil Tomaszewski	6b9375804c	Rename circuitpython.spk to firmware.spk	2019-10-11 17:15:25 +02:00
Kamil Tomaszewski	771f43591a	Add links to serial drivers	2019-10-11 12:57:43 +02:00
Kamil Tomaszewski	eb1dfd2312	Add .gitignore	2019-10-11 12:11:48 +02:00
Kamil Tomaszewski	0d139e4eca	Add a way to change serial device name	2019-10-11 12:09:51 +02:00
Kamil Tomaszewski	c062990830	Make Makefile work across OS	2019-10-11 12:09:51 +02:00
Kamil Tomaszewski	8f653d6238	Use CXD56 pin names	2019-10-11 12:09:51 +02:00
Kamil Tomaszewski	5f09609d41	Add Spresense board folder	2019-10-11 12:09:51 +02:00
Kamil Tomaszewski	1fa8841d20	Change port name to cxd56	2019-10-11 08:23:51 +02:00
Hierophect	bfebbaee32	Merge remote-tracking branch 'upstream/master' into stm32-uart	2019-10-10 14:28:19 -04:00
Hierophect	06b2fed518	improve macro readability	2019-10-09 16:06:23 -04:00
hierophect	4ce7a4cfdb	Merge branch 'master' into stm32-DAC	2019-10-09 15:47:43 -04:00
Hierophect	5f33c542b4	Fix include issues	2019-10-09 14:52:30 -04:00
Hierophect	8a94f25181	Text fixes	2019-10-09 13:54:40 -04:00
Hierophect	cb0ed264c4	Implement DAC	2019-10-09 13:34:20 -04:00
Kamil Tomaszewski	6d1748fd59	Add spresense-exported-sdk submodule	2019-10-09 08:38:50 +02:00
Kamil Tomaszewski	526925f1c6	Add Spresense board	2019-10-09 08:27:08 +02:00
Hierophect	f58d54cd22	Preliminary read system, not buffered	2019-10-08 16:03:51 -04:00
kamtom480	f6e553f89f	Merge branch 'master' into circuitpython-number-endpoint	2019-10-08 09:41:29 +02:00
Chris Osterwood	137a4f8a5d	Added new flash SKU for production hardware	2019-10-07 14:50:39 -04:00
Hierophect	cc3a17845c	Fix USB issues, frequency macro, F412 tests	2019-10-07 14:22:12 -04:00
hierophect	59ed879c8f	Merge pull request #2197 from hierophect/always-build-modules ... Sort some modules into ALWAYS-BUILD in mpconfig	2019-10-07 09:09:28 -04:00
Kamil Tomaszewski	7aefcc449a	Add an alternative way to number the USB endpoints ... Two options available: - relative numbering (USB_RELATIVE_EP_NUM = 1) - default - absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!	2019-10-07 12:31:42 +02:00
Dan Halbert	fc19e03128	WIP: bonding	2019-10-06 21:30:26 -04:00
Hierophect	0b85172ba6	WIP	2019-10-04 14:37:18 -04:00
Hierophect	51901f7de0	Add peripheral definitions	2019-10-04 11:42:38 -04:00
Hierophect	dc4abb922b	Revert accidental OS delete	2019-10-03 15:40:46 -04:00
hierophect	f4922a530a	Merge pull request #2186 from hierophect/stm32-spi-flash ... STM32: SPI Flash	2019-10-03 15:32:56 -04:00
Hierophect	7a2f60c43d	Add Always Build flag, remove redundancy	2019-10-03 15:23:45 -04:00
Hierophect	eacdb1da6e	Disable timeout, remove redundancy	2019-10-03 14:43:25 -04:00
Dan Halbert	463415a7ef	update stm32f4 port to use tinyusb synopsys tree	2019-10-03 13:26:03 -04:00
Hierophect	83c49a5c80	Increase SPI timeout duration	2019-10-03 09:14:54 -04:00
Hierophect	5a6194839b	Timeout fix for I2C device testing	2019-10-02 17:59:42 -04:00
Hierophect	86305bfdfe	Make all errors value errors	2019-10-02 17:32:54 -04:00
Hierophect	9aa6d215fd	Add some definitions for when F412 can be implemented	2019-10-02 16:03:22 -04:00
Hierophect	5a2f82095a	Implement SPI flash settings, bugfix for SPI pin assignment	2019-10-02 15:17:49 -04:00
Scott Shawcroft	d6e987e587	Merge pull request #2182 from hierophect/stm32-spi ... STM32: SPI Support	2019-09-30 20:00:23 -07:00
Hierophect	b66700720b	improve error readability	2019-09-30 18:05:07 -04:00
Hierophect	1f90cffc89	protect against edge case	2019-09-30 13:33:20 -04:00
Hierophect	56eb9666ea	Implement never-reset, fix F412	2019-09-30 11:35:40 -04:00
Hierophect	a475b667b5	Clean up debugging messages, remove shortcuts	2019-09-30 11:04:09 -04:00
Hierophect	492bc3eedc	Expand pin definitions for all boards	2019-09-30 10:45:02 -04:00
Hierophect	e2d0ad6adc	Add settings reconfiguration	2019-09-29 15:01:32 -04:00
Hierophect	bf7b841020	Further reversion	2019-09-29 13:22:12 -04:00
Hierophect	89315999e2	Fix bad returns, revert flash changes	2019-09-29 13:18:43 -04:00
Hierophect	270396a882	Refine SPI settings for testing	2019-09-29 13:01:27 -04:00
Hierophect	d7443fce54	First implementation of read write	2019-09-27 17:59:55 -04:00
Hierophect	ad33950966	Flash memory changes - non functional	2019-09-27 11:00:09 -04:00
Dan Halbert	aa1eed3bd3	initial Arduino Nano 33 BLE board definition	2019-09-26 15:28:57 -04:00
Scott Shawcroft	cdc116291b	Merge pull request #2177 from wallarug/walla/robohatmm1-production ... Robo HAT MM1 - Fixes after testing	2019-09-26 10:44:55 -07:00
Hierophect	51df8d18b4	Merge remote-tracking branch 'upstream/master' into stm32-spi	2019-09-26 13:44:24 -04:00
Scott Shawcroft	8221553600	Merge pull request #2175 from hierophect/stm32-f405-support ... STM32 F405 support	2019-09-26 10:38:03 -07:00
hierophect	f4a31a7843	Update PID to suggestion ... USB_PID = 0x805C (Pyboard Co-Authored-By: Scott Shawcroft <scott@tannewt.org>	2019-09-26 11:38:08 -04:00
Hierophect	f08127bfcc	WIP	2019-09-26 11:35:08 -04:00
arturo182	21f8c3e40a	serpente: Update PID and enable as many modules as we can fit	2019-09-26 17:22:18 +02:00
wallarug	3c99a23adb	fix spi	2019-09-26 21:47:36 +10:00
wallarug	533a5bc7a3	fixed SPI on M4	2019-09-26 21:43:52 +10:00
wallarug	5cd10b3ba0	updated robohatmm1_m0	2019-09-26 20:02:09 +10:00
wallarug	39265fccf3	included a version number	2019-09-26 19:22:51 +10:00
wallarug	db9495b04b	updated board name	2019-09-26 19:21:53 +10:00
wallarug	08b0f80879	updated board name	2019-09-26 19:21:24 +10:00
wallarug	b7e8a031d0	remove frozen busio library	2019-09-26 19:19:54 +10:00
wallarug	ff13b6f682	updated pins.c	2019-09-26 19:18:50 +10:00
Hierophect	a926d01509	reorganize pins	2019-09-25 11:53:49 -04:00
Hierophect	f286737868	add peripheral definitions	2019-09-25 11:37:27 -04:00
Hierophect	6058677979	whitespace fix	2019-09-24 16:10:43 -04:00
Hierophect	742e747609	Implement another USB ID	2019-09-24 14:53:56 -04:00
Hierophect	c3baf286c1	Implement correct USB IDs	2019-09-24 14:51:57 -04:00
Hierophect	d597410330	implement suggested changes	2019-09-24 14:15:04 -04:00
Hierophect	dc1109dba7	add feather support	2019-09-24 14:07:03 -04:00
Hierophect	61a45cdaed	clock fixes	2019-09-24 13:17:46 -04:00
Hierophect	31a22858d5	text fixes	2019-09-24 10:05:40 -04:00
Hierophect	2b65a0e95f	WIP	2019-09-23 17:40:28 -04:00
Hierophect	f1cd1c5d4d	minor edits	2019-09-23 13:30:37 -04:00
Hierophect	19cf716461	Fix missing items	2019-09-23 12:14:27 -04:00
Hierophect	60bb6acf38	Add F405 support	2019-09-23 11:59:14 -04:00
Hierophect	fd1a257df3	Merge branch 'master' into stm32-f405-support	2019-09-23 09:36:03 -04:00
wallarug	70860e1352	robohatmm1 removed uart and put in correct order	2019-09-22 19:47:44 +10:00
Limor "Ladyada" Fried	7f1bc48a88	Merge pull request #2173 from hierophect/stm32-os ... STM32: Add OS and Struct support	2019-09-20 16:42:31 -04:00
Hierophect	200c474a13	correct typo	2019-09-20 15:55:11 -04:00
Hierophect	00f1e4f1ad	WIP	2019-09-20 15:54:34 -04:00
Limor "Ladyada" Fried	8d16379634	Merge pull request #2151 from hierophect/stm32-peripherals ... STM32: peripheral management	2019-09-20 15:40:25 -04:00
Hierophect	9af5f3a7a7	Add OS and struct support	2019-09-20 14:51:23 -04:00
Hierophect	ef15ebe8c7	Repeated initialization protection, cleanup	2019-09-20 14:33:37 -04:00
Scott Shawcroft	13a9c446ee	Merge pull request #2171 from hierophect/stm32-find-fix ... STM32: fix illegal option error on mac builds	2019-09-20 10:19:58 -07:00
Scott Shawcroft	19c6c96929	Merge pull request #2130 from jepler/nrf-debugflags ... nrf: Makefile: sensible flags for debugging	2019-09-20 10:18:00 -07:00
Hierophect	7cea078494	Added existance check	2019-09-20 12:39:48 -04:00
Melissa LeBlanc-Williams	9a74bf929b	Added TFT pins to HalloWing M4 for code compatibility	2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams	b7598f7058	Merge branch 'master' of https://github.com/adafruit/circuitpython	2019-09-19 14:20:28 -07:00
Hierophect	18c5be8835	QOL pin adds	2019-09-19 17:01:25 -04:00
Hierophect	9da5723c59	F412 support, cleanup	2019-09-19 16:32:38 -04:00
Hierophect	c12860ff7d	the code equivalent of smacking something really hard with a wrench	2019-09-19 16:10:26 -04:00
Hierophect	b325eadc33	various failed attempts to get I2C to reset	2019-09-19 16:02:52 -04:00
Scott Shawcroft	0fed65e7d2	Merge remote-tracking branch 'adafruit/master' into dac51	2019-09-19 12:21:54 -07:00
Melissa LeBlanc-Williams	341428b4da	Added SPEAKER pin to HalloWing M4 for code compatibility	2019-09-19 11:23:37 -07:00
Hierophect	d56b62e44c	Fix crash related to improper instance assignment	2019-09-19 14:15:12 -04:00
Melissa LeBlanc-Williams	8dfb2237d9	Added TOUCH pins to HalloWing M4 for code compatibility	2019-09-19 10:40:13 -07:00
Hierophect	c85873e4e6	index fix	2019-09-19 12:45:47 -04:00
Hierophect	60985968a8	Reorganize storage to per-pin	2019-09-19 12:18:18 -04:00
Hierophect	12cd009bb9	WIP	2019-09-18 16:49:15 -04:00
Hierophect	bf62477ff9	Merge branch 'stm32-analogio' into stm32-peripherals	2019-09-18 13:45:22 -04:00
Hierophect	cd5ec365d3	Cleanup	2019-09-18 13:44:08 -04:00
Hierophect	d60ecc5e3d	Rework I2C peripheral check	2019-09-18 13:42:54 -04:00
Hierophect	69a0bfaf34	Merge branch 'stm32-analogio' into stm32-peripherals	2019-09-18 12:15:44 -04:00
Hierophect	c9b86111f4	text fix	2019-09-18 11:45:21 -04:00
Hierophect	601c3ea8dc	minor HAL swap	2019-09-17 17:54:29 -04:00
Hierophect	97b1208829	Merge remote-tracking branch 'upstream/master' into stm32-analogio	2019-09-17 17:47:15 -04:00
Hierophect	48ae684c6e	Adjust settings to support F412	2019-09-17 17:46:44 -04:00
Limor "Ladyada" Fried	69234cc8d6	Merge pull request #2163 from tannewt/cpx_displayio ... Add custom CPX build for display support	2019-09-17 16:55:42 -04:00
Hierophect	863655044e	Re-expand pin reset	2019-09-17 16:52:44 -04:00
Hierophect	71531dd4d1	Fix out of date HAL inputs in DigitalIO	2019-09-17 16:15:39 -04:00
Hierophect	7c713b9e3b	Fix crash related to ADC timeout	2019-09-17 15:45:15 -04:00
Hierophect	168823e096	Retract pin resets, revert to HAL, QOL changes	2019-09-17 15:07:08 -04:00
Scott Shawcroft	fc90c942f5	Add custom CPX build for display support	2019-09-17 10:40:07 -07:00
Scott Shawcroft	b5a9ed3688	Merge pull request #2161 from jepler/nrf-analog-reference ... nRF: Change analog reference voltage	2019-09-17 09:41:52 -07:00
jepler	dffedd7c86	samd: peripherals: update submodule reference	2019-09-16 21:48:31 -05:00
jepler	d39c85e3f5	nRF: Change analog reference to VCC(/4) ... @ladyada says: "having this be adjustable (reference) would be ideal cause you can get absolute voltages but for now, VCC/4 + 4x matches every other chip :)" ... and indeed doing it this way happens to give a much more steady reading when using a VCC-referenced resistance, and so many of the simple things you'd wire up are actually VCC-referenced anyway.	2019-09-16 21:43:07 -05:00
Jeff Epler	c56186da8c	nRF: Change analog reference voltage ... Datasheet reading explains one reason why readings might have been 10% low.	2019-09-16 18:35:48 -05:00
Scott Shawcroft	aa9b57fc81	Merge pull request #2154 from arturo182/master ... Add support for Serpente boards	2019-09-16 09:20:17 -07:00
arturo182	e1679acaec	Set as small build regardless of language	2019-09-16 11:51:46 +02:00
jepler	61698eb5d8	AnalogOut / AudioOut: Copy settings from Arduino ... Make changes in asf4_conf even though I think in these cases the "peripherals" submodule is running the show. Arduino clocks the DAC at 12MHz but uses the CCTRL setting for clocking < 1.2MHz (100kSPS). A fresh clock (6) is allocated for the new 12MHz clock. This matches the Arduino value, though not the GCLK index. Modify other settings to more closely resemble Arduino. In AudioOut, actually clock the waveform data from the timer we set up for this purpose. This gives good waveforms when setting AnalogOut full-scale in a loop, but the rise/fall of waveforms that come from AudioOut are still erratic. Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000) then the erratic Note that this will require https://github.com/adafruit/samd-peripherals/pull/26 to be accepted for the submodule update here to work.	2019-09-15 11:30:49 -05:00
Kattni Rembor	c94310411b	Update board def, enable touchio	2019-09-14 21:19:35 -04:00
arturo182	28bb901d1e	Add support for Serpente boards	2019-09-14 16:06:28 +02:00
Hierophect	78de4b70ed	Implemented working I2C on F412.	2019-09-13 14:00:53 -04:00
Scott Shawcroft	3422e53bd1	Merge pull request #2147 from jepler/issue2146 ... nRF: PWMOut: At deinit, make pin available again	2019-09-13 09:32:28 -07:00
Hierophect	d96aa8dac4	Merge branch 'stm32-analogio' into stm32-peripherals	2019-09-13 12:10:54 -04:00
Hierophect	f5cb2cc14e	First pass at I2C pin authentication	2019-09-12 19:00:02 -04:00
Hierophect	e445e7930e	Merge remote-tracking branch 'upstream/master' into stm32-pin-remap	2019-09-12 16:00:41 -04:00
Hierophect	6b6178613d	WIP	2019-09-12 16:00:01 -04:00
Hierophect	1fda6d4a48	Merge branch 'stm32-pin-remap' into stm32-peripherals	2019-09-12 14:27:24 -04:00
Hierophect	55eb8dcfa0	ADC unit select, reset bugfix	2019-09-12 13:47:01 -04:00
jepler	df48312ce7	nRF: PWMOut: At deinit, make pin available again ... Closes: #2146	2019-09-11 20:09:38 -05:00
Hierophect	57ce381bcd	disable claim pin for debug	2019-09-11 17:26:33 -04:00
Hierophect	4b3796a303	Merge remote-tracking branch 'upstream/master' into stm32-analogio	2019-09-11 14:12:01 -04:00
Hierophect	a59a8e7a19	Merge branch 'stm32-pin-remap' into stm32-analogio	2019-09-11 14:11:47 -04:00
Hierophect	6e007f4e8c	text fixes	2019-09-11 14:09:57 -04:00
Hierophect	d888922db6	minor text fix	2019-09-11 13:55:48 -04:00
Hierophect	3d2a4d4165	Merge branch 'stm32-f412-tinyusb' into stm32-analogio	2019-09-11 13:47:20 -04:00
Hierophect	9e25d9a9be	Support for F412	2019-09-11 13:45:36 -04:00
Hierophect	9f8c8c6504	Compiler level bit packing	2019-09-11 13:12:49 -04:00
Hierophect	37248037d7	Alternative implementation via HAL for readability comparison	2019-09-11 11:35:37 -04:00
Hierophect	99c3cab00f	text fixes	2019-09-10 19:51:26 -04:00
Hierophect	500b21c236	First pass at full LL implementation	2019-09-10 19:48:24 -04:00
Hierophect	49b04f4b77	Minor text fix	2019-09-10 17:52:07 -04:00
Scott Shawcroft	89fed709ad	Merge pull request #2127 from jepler/nrf-i2s ... nrf: Add i2s audio output	2019-09-10 11:00:26 -07:00
Dan Halbert	b8200d7295	fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use	2019-09-09 23:17:52 -04:00
jepler	7b9dfc9952	nrf: i2s: tune audio buffering ... .. based on some tasks I found that caused stuttering: # Test SD and printing while True: os.listdir('.') # Test bulk I/O while True: len(open('somefile.wav', 'rb').read()) Each of these tasks *WAS* worse and I am improving them in a separate PR by adding RUN_BACKGROUND_TASKS to them.	2019-09-09 20:13:12 -05:00
jepler	c66f5a8536	nrf: i2s: rewrite without 'goto'	2019-09-09 19:26:18 -05:00
jepler	fe9605a6a3	nrf: i2s: Comment this slightly tricksy code	2019-09-09 19:25:52 -05:00
Hierophect	c438468a82	Updated VID and PID	2019-09-09 17:05:18 -04:00
Hierophect	d8251ae4ab	Include full descriptor list	2019-09-09 15:01:04 -04:00
Hierophect	129615a724	text fixes	2019-09-09 11:58:27 -04:00
Hierophect	426ddb356e	Add support for F412 via latest tinyusb update	2019-09-09 11:42:55 -04:00
jepler	ccf08aa3df	nrf: I2SOut: deal more gracefully with errors from the sample	2019-09-08 21:59:07 -05:00
jepler	e890bc8efe	nrf: Makefile: sensible flags for debugging ... This enables the highest level of debug symbols, and all optimizations except lto that do NOT interfere with debugging, in the view of the gcc maintainers.	2019-09-08 21:07:00 -05:00
jepler	f38ee42874	nrf: Add i2s audio output ... Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC. I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal bit rates. With this setup, all the 11025Hz samples sound good. I tested play, pause, and loop functionality. During some runs with 22050Hz samples, there were glitches. However, these may have only occurred during runs where I had set breakpoints and watchpoints in gdb. I also tested with a MAX98357A I2S amplifier. On this device, everything sounded "scratchy". I was powering it from 5V and the 5V rail seemed steady, so I don't have an explanation for this. However, I haven't tried it with a SAMD board.	2019-09-08 16:46:35 -05:00
Dan Halbert	bd7b03fc7e	Merge pull request #2124 from dhalbert/cpb-fixes ... Fix Circuit Playground Bluefruit pin errors	2019-09-08 12:07:16 -04:00
Hierophect	0d2e9c3762	WIP	2019-09-07 15:54:16 -04:00
Hierophect	beb40a62a7	Fix missed shift replacement	2019-09-07 13:19:50 -04:00
Hierophect	642f4535f4	text fixes	2019-09-06 19:44:57 -04:00
Hierophect	4490fb196d	delete analogio for now	2019-09-06 19:42:03 -04:00
Hierophect	a3ed5ec27b	Add latest USB support	2019-09-06 18:02:57 -04:00
Hierophect	589b502bfc	Merge branch 'master' into stm32-analogio	2019-09-06 17:55:33 -04:00
Hierophect	a932d2c4a1	Minor fixes	2019-09-06 17:40:45 -04:00
Hierophect	8c0be5fbe2	Pack pin numbers, add ADC to pin structure, support DigitalIO	2019-09-06 17:30:52 -04:00
Dan Halbert	cf6fbcbf2d	Merge pull request #2123 from hierophect/stm32-flashstub-fix ... Fix stm32f412zg compile warning	2019-09-06 14:56:24 -04:00
Dan Halbert	3c22c690c8	CPB A1 pin mapping wrong; remove A7	2019-09-06 14:17:11 -04:00
Hierophect	3156ee1acb	Re-apply warning as error	2019-09-06 11:28:57 -04:00
Hierophect	ba45f98073	Add basic analogio files	2019-09-06 11:26:20 -04:00
Scott Shawcroft	8066810abb	Merge pull request #2091 from jepler/samd-dma-tracking ... Samd dma tracking	2019-09-05 11:27:59 -07:00
Scott Shawcroft	c5caacafdd	Merge pull request #2100 from pewpew-game/pewpew_m4 ... Add support for PewPew M4 board	2019-09-05 11:26:47 -07:00
Radomir Dopieralski	d50ed3b6e7	Add support for PewPew M4 board	2019-09-05 10:50:33 +02:00
Dan Halbert	f3af2a6fb7	Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac	2019-09-04 21:56:13 -04:00
Dan Halbert	195de97c67	use only one endpoint pair for MSC except on SAMD21	2019-09-04 21:45:16 -04:00
Dan Halbert	fca440fb66	Merge pull request #2113 from tannewt/displayio_hidden ... Add .hidden to TileGrid and Group	2019-09-04 15:48:00 -04:00
Scott Shawcroft	321b57a5d2	Merge pull request #2080 from sommersoft/mixer_voice ... Add audiocore.MixerVoice	2019-09-04 12:46:59 -07:00
Dan Halbert	b46c8dcc62	Merge pull request #2065 from hierophect/f411re-feature-buildout ... F411re feature buildout	2019-09-04 15:45:54 -04:00
Scott Shawcroft	7951646b9a	Disable bitbangio on uGame10	2019-09-04 11:49:47 -07:00
Hierophect	479b047618	Reverted descriptor changes pending HID restructuring	2019-09-04 13:58:18 -04:00
sommersoft	b1c3d47413	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-09-01 21:16:12 -05:00
sommersoft	c4d6f4f536	disable 'audiomixer' for all M0 boards	2019-09-01 17:39:20 -05:00
Scott Shawcroft	b954b2f5df	Merge pull request #2092 from dhalbert/bleio-api-revamp ... Bleio attribute api revamp	2019-08-29 21:48:31 -07:00
sommersoft	8120f5cdad	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-08-29 22:14:53 -05:00
Dan Halbert	7a64af9280	rename bleio module to _bleio	2019-08-29 18:44:27 -04:00
Dan Halbert	b11b7916fd	address minor issues: typos, make translate, and sphinx	2019-08-29 17:58:21 -04:00
Scott Shawcroft	9730d4aa1c	Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x	2019-08-29 14:38:16 -07:00
Scott Shawcroft	0aa5507c4c	add additional pin aliases	2019-08-29 13:41:28 -07:00
Scott Shawcroft	84839de56f	Hallowing M4	2019-08-29 10:34:46 -07:00
Dan Halbert	f17059b10b	another API rework: less abstraction leakage	2019-08-28 23:15:22 -04:00
jepler	30a9346373	samd: audio_dma: Track channel allocation ... Previously, we depended on allocated channels to always be "dma_channel_enabled". However, (A) sometimes, many operations would take place between find_free_audio_dma_channel and audio_dma_enable_channel, and (B) some debugging I did led me to believe that "dma_channel_enabled" would become false when the hardware ended a scheduled DMA transaction, but while a CP object would still think it owned the DMA channel. ((B) is not documented in the datasheet and I am not 100% convinced that my debugging session was not simply missing where we were disabling the channel, but in either case, it shows a need to directly track allocated separately from enabled) Therefore, * Add audio_dma_{allocate,free}_channel. * audio_dma_free_channel implies audio_dma_disable_channel * track via a new array audio_dma_allocated[] * clear all allocated flags on soft-reboot * Convert find_free_audio_dma_channel to audio_dma_allocate_channel * use audio_dma_allocated[] instead of dma_channel_enabled() to check availability * remove find_free_audio_dma_channel * For each one, find a matching audio_dma_disable_channel to convert to audio_dma_free_channel Closes: #2058	2019-08-28 17:00:22 -05:00
jepler	0b00787b4d	samd: AudioOut: ensure stopped before deinit ... .. otherwise, a sequence like >>> a = audioio.AudioOut(board.A0) >>> a.play(sample, loop=True) >>> a.deinit() would potentially leave related DMA channel(s) active.	2019-08-28 16:43:55 -05:00
Dan Halbert	19c59b41ed	bleio: API change to create and connect related objects simulatenously: no orphan bleio objects	2019-08-28 16:15:09 -04:00
Dan Halbert	a72bcab0fd	Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp	2019-08-28 16:09:18 -04:00
Scott Shawcroft	0876d5c4ad	Disable bitbangio on Itsy M0 ... Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files	2019-08-27 15:21:47 -07:00
Dan Halbert	0364f1dc85	remove some debugging prints	2019-08-26 08:17:59 -04:00
Dan Halbert	76446f634b	BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding	2019-08-25 21:38:13 -04:00
sommersoft	696117b048	disable audiomixer on boards it doesn't fit on	2019-08-25 14:53:34 -05:00
sommersoft	2e4b687ba5	enable audiomixer on nrf	2019-08-25 07:32:48 -05:00
Scott Shawcroft	7324b70a7c	Rework based on Dan's review	2019-08-23 15:27:21 -07:00
Scott Shawcroft	b992ca80e7	Rejigger builds to fit under 50 minute limit	2019-08-22 20:29:58 -07:00
Scott Shawcroft	72e7ffa324	More cleanup	2019-08-22 16:16:09 -07:00
Scott Shawcroft	fd8050b369	Turn off features to make room for ePaper	2019-08-22 15:19:45 -07:00
Scott Shawcroft	9993a99906	Add initial Monster M4SK build	2019-08-22 14:24:32 -07:00
Scott Shawcroft	2497cbe186	Fix nrf builds	2019-08-22 14:23:33 -07:00
Scott Shawcroft	3a98de1236	Add reset() to display busses to detect whether it works	2019-08-22 14:23:33 -07:00
Scott Shawcroft	36a23e0fe3	Rework refresh API and factor common display stuff out ... NOT TESTED! Just compiles Fixes #1691	2019-08-22 14:23:27 -07:00
Scott Shawcroft	c247e7df9c	Begin refresh rework.	2019-08-22 14:08:33 -07:00
Benny Meisels	d37dd4d758	Updated ParallelBus implementation in nrf port	2019-08-22 14:08:33 -07:00
Scott Shawcroft	70680d5b22	EPaper displays work mostly.	2019-08-22 14:08:33 -07:00
Dan Halbert	7cc15e56c8	make translate	2019-08-22 15:20:23 -04:00
Dan Halbert	18f441ae35	Merge pull request #2083 from dhalbert/no-32khz-xtal ... Fix CPBlue LFCLKSRC; CPB has no status neopixel	2019-08-22 13:14:40 -04:00
Dan Halbert	0b7291d767	fix default crystal value; fix include order	2019-08-22 09:01:05 -04:00
Scott Shawcroft	6aa311aabd	Merge pull request #2027 from dastels/displayio_fill_area ... To displayio.Display: expose fill_area and add a property for rotation	2019-08-21 23:48:21 -07:00
Dan Halbert	acc6df4959	merge similar fix in	2019-08-22 01:29:34 -04:00
Dan Halbert	d94023e9b3	Fix CPBlue LFCLKSRC; CPB has no status neopixel	2019-08-22 01:04:00 -04:00
Scott Shawcroft	524fa82092	Merge pull request #2081 from dhalbert/rotaryio-pin-check-fix ... typo in IncrementalEncoder.c	2019-08-21 13:02:06 -07:00
Scott Shawcroft	389e7cc35d	Merge pull request #2072 from bmeisels/nrf-no-crystal-support ... Add support for nrf boards that don't have an external crystal	2019-08-21 13:01:26 -07:00
Dave Astels	d547d59cba	Merge remote-tracking branch 'adafruit/master' into displayio_fill_area	2019-08-21 15:02:51 -04:00
Dave Astels	dcf36db263	Make room	2019-08-21 14:46:10 -04:00
Benny Meisels	fe2ec6c887	Add support for nrf boards that don't have an external crystal	2019-08-20 23:30:21 +03:00
Dan Halbert	6e3a6d0ac5	typo in IncrementalEncoder.c	2019-08-20 16:23:17 -04:00
Dan Halbert	e00696de7f	merge from upstream and make translate	2019-08-20 13:06:23 -04:00
Dan Halbert	44b28d1187	update tinyusb to 00c440cb	2019-08-19 19:42:45 -04:00
Dan Halbert	e3dc5e3a66	Merge remote-tracking branch 'adafruit/master' into run-background-tasks ... Restore dependencies indicated by indentation in circuitpy_mpconfig.h.	2019-08-19 12:41:20 -04:00
Hierophect	e490e6361f	Add warnings, cosmetic fixes, remove vestigial modules	2019-08-19 10:47:18 -04:00
Jeff Epler	26a05d01dc	Merge remote-tracking branch 'origin/master' into nrf-pdm-audioin	2019-08-18 21:30:14 -05:00
Hierophect	95411a62b3	Cosmetic fixes	2019-08-18 19:08:27 -04:00
Jeff Epler	912fd7759d	nrf: PDMIn: Implement ... So far, this supports only 16kHz and 16-bit samples with a fixed gain. This is enough to support the basic functionality of e.g., sensing ambient audio levels.	2019-08-18 15:58:04 -05:00
Jeff Epler	79f8a85786	nrf: stub out audiobusio.PDMIn, audiobusio.I2SOut	2019-08-18 15:55:57 -05:00
Dan Halbert	3f7321af00	Merge pull request #2031 from jepler/nrf-lto ... Enable link-time optimization for nrf targets	2019-08-18 12:35:26 -04:00
Dan Halbert	e2a4c76a37	make nrf touchio be generic: now available for SAMD51 too	2019-08-18 08:44:10 -04:00
Scott Shawcroft	85d7398476	Merge pull request #2066 from dhalbert/ble-pairing ... BLE: more features	2019-08-16 14:50:00 -07:00
Dan Halbert	630c92392a	address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings	2019-08-16 15:18:53 -04:00
Hierophect	7dbf1a8caa	text fixes	2019-08-15 17:56:15 -04:00
Hierophect	1f42ce5f40	QOL fixes, compatibility fixes, attribution	2019-08-15 17:45:40 -04:00
Hierophect	bc7ba33892	Add uid fetch, revert USB hacks	2019-08-15 16:35:01 -04:00
Hierophect	a9d3ad86e5	Fix flash size, add filesystem disable flag	2019-08-15 15:55:33 -04:00
Hierophect	0fdb5a032f	Text fixes	2019-08-15 15:12:50 -04:00
Hierophect	620d3d14dd	Add conditional endpoints to descriptor script	2019-08-15 13:41:51 -04:00
Hierophect	1539dca7f0	Add reset support, minor fixes	2019-08-14 13:14:42 -04:00
Dan Halbert	5877bd6036	CPblue initial definition	2019-08-13 22:12:36 -04:00
Hierophect	c4c55fffb1	Fixed remaining issues with flash organization and writing	2019-08-13 18:05:40 -04:00
Scott Shawcroft	583392a5c6	Merge pull request #2046 from brentru/add-pyportal-titano ... Add PyPortal Titano	2019-08-12 16:01:10 -07:00
Jeff Epler	11dd3a260e	nrf: Use RUN_BACKGROUND_TASKS	2019-08-11 08:53:02 -05:00
Jeff Epler	d9ee2d28a0	atmel-samd: Use RUN_BACKGROUND_TASKS	2019-08-11 08:53:02 -05:00
Hierophect	300dc68955	Further non-functional flash changes	2019-08-10 18:00:09 -04:00
Hierophect	294d6dc867	Add flash functions and setup, fix msc descriptor bug	2019-08-09 19:58:54 -04:00
brentru	5a8846d33c	remove cruft from prv board	2019-08-08 15:12:01 -04:00
brentru	f87f48ab88	adding pyportal titano board definition	2019-08-08 14:56:28 -04:00
Chris Osterwood	d5658860aa	Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.	2019-08-08 14:39:50 -04:00
Chris Osterwood	fb2712410e	Merge branch 'master' into capablerobot-usbhub	2019-08-08 14:14:23 -04:00
Dan Halbert	1570ef2dd4	specifying attribute length; fix up value setting	2019-08-07 23:49:09 -04:00
Jeff Epler	33b949abfa	samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines ... Some ports which actually don't have audioio or audiobusio were still calling into audio_dma_background(). This wasn't an error until the assignment to audio_dma_state in audio_dma_stop was added, though it's not clear why.	2019-08-07 21:29:24 -05:00
Jeff Epler	500d1bb168	samd: audio_dma.c: Remove exceptions, just return early ... These were most useful debugging, but because this code can be reached "outside of the VM", it's not actually permitted to throw exceptions here.	2019-08-07 20:20:36 -05:00
brentru	1d4700cb6c	add pindefs for tft and tft control	2019-08-07 18:29:20 -04:00
Hierophect	c375a5d37f	Add pin and module support for F411	2019-08-07 18:12:13 -04:00
brentru	8f6eac98f3	add defs for pyportal titano	2019-08-07 17:10:31 -04:00
Dan Halbert	d047b73a9c	fix newly-introduced bugs; UART client/server working again	2019-08-07 11:10:21 -04:00
Jeff Epler	39c64bf83c	samd: audio_dma_stop: don't free invalid channel ... audio_dma_stop can be reached twice in normal usage of AudioOut. This may bear further investigation, but stop it here, by making the function check for a previously freed channel number. This also prevents the event channel from being disabled twice. The first stop location is from audio_dma_get_playing, when the buffers are exhausted; the second is from common_hal_audioio_audioout_stop when checking the 'playing' flag.	2019-08-06 22:00:31 -05:00
Jeff Epler	8b717955ba	samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking ... It turns out the "disable" error will fire in practice, we'll fix that next.	2019-08-06 22:00:31 -05:00
Dan Halbert	d74c8b9425	WIP: more Descriptor work; refactor gattc/gatts read/write	2019-08-06 22:55:25 -04:00
Jeff Epler	6253f11503	samd: audio_dma_stop: Clear out audio_dma_state[] ... As identified in #1908, when both AudioOut and PDMIn are used, hard locks can occur. Because audio_dma_stop didn't clear audio_dma_state[], a future call to audio_dma_load_next_block could occur using a DMA object which belongs to PDMIn. I believe that this Closes: #1908 though perhaps it is still not the full story. Testing performed: Loaded a sketch similar to the one on #1908 that tends to reproduce the bug within ~30s. Ran for >300s without hard lock. HOWEVER, while my cpx is no longer hard locking, it occasionally (<1 / 200s) announces Code done running. Waiting for reload. (and does so), even though my main loop is surrounded by a 'while True:' condition, so there are still gremlins nearby.	2019-08-06 21:34:21 -05:00
Dan Halbert	243334da75	Merge remote-tracking branch 'adafruit/master' into ble-pairing	2019-08-05 23:06:24 -04:00
Scott Shawcroft	59efce3035	Merge pull request #2039 from dhalbert/metro-52840 ... Metro nRF52840 rev A defn; remove '#define FEATHER52840' from mpconfigboard.h	2019-08-05 18:48:36 -07:00
Scott Shawcroft	b675a27e16	Merge pull request #2000 from jepler/nrf-pwm-audio ... Implement PWM audio out for the nrf port	2019-08-05 17:26:27 -07:00
Dan Halbert	c56566179a	Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files	2019-08-05 18:10:27 -04:00
Dan Halbert	b67d04a5b1	Merge remote-tracking branch 'adafruit/master' into ble-pairing	2019-08-05 16:35:44 -04:00
Hierophect	2489c09b44	Merge i2c implementation	2019-08-04 17:24:07 -04:00
Hierophect	a635d46b1a	Fix merge related issues	2019-08-04 17:19:38 -04:00
Hierophect	0c43bae01d	Merge branch 'master' into f411re-feature-buildout	2019-08-04 16:37:49 -04:00
Hierophect	268cf0a3cc	Quick fix for incorrect MCU package type	2019-08-04 16:31:03 -04:00
Jeff Epler	77bc1ba03e	nrf: PWMAudioOut: Remove the need to wait in "pause" ... The original formulation was because I saw the need to avoid a transition from playing to stopped exactly when a resume was taking place. However, @tannewt was concerned about this pause causing trouble, because it could be relatively lengthy (several ms even in a typical case). After reflection, I've convinced myself that updating the registers in this order in resume avoids a window where a "stopped" event can be missed as long as the shortcut is updated first. Testing re-performed: pause/resume testing of looped RawSample and WaveFile audio sources.	2019-08-03 08:19:25 -05:00
Jeff Epler	4bae29b925	nrf: enable link-time optimization ... Testing performed: installed freshly built .uf2 on a Particle Xenon. Checked that circuitpython still starts. Checked that the size of all .uf2 files for nrf builds are plausible. Aside from memory savings, the performance of Python code (pystone) increased by about +14%. However, this adds about 12-16 seconds to each nrf build. Timings & Sizes (build system: i5-3320M, -j5 parallelism on 4 threads): Before: $ make -j5 BOARD=particle_xenon 765004 bytes free in flash out of 1048576 bytes ( 1024.0 kb ). 232076 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ). 68.54user 11.83system 0:34.34elapsed 234%CPU pystones before: 570 After: $ make -j5 BOARD=particle_xenon 804284 bytes free in flash out of 1048576 bytes ( 1024.0 kb ). 232072 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ). 71.06user 11.77system 0:46.91elapsed 176%CPU pystones after: 650 Timings on travis: Before: Build feather_nrf52840_express for pl took 55.79s and succeeded Build feather_nrf52840_express for zh_Latn_pinyin took 3.18s and succeeded After: Build feather_nrf52840_express for pl took 62.72s and succeeded Build feather_nrf52840_express for zh_Latn_pinyin took 19.10s Closes: #1396	2019-08-02 20:59:47 -05:00
Dan Halbert	7ce3776b80	WIP: rework of Characteristic properties; enhance Descriptor; not tested	2019-08-02 17:57:31 -04:00
Jeff Epler	28b7cbfca6	nrf: Mark interrupt vectors as used	2019-08-02 07:53:35 -05:00
jepler	34e2bab96a	nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE	2019-08-01 18:53:07 -05:00
Jeff Epler	76f65ac694	Implement play/pause ... .. and also incidentally fix a problem where a RawSample could only be looped 131070 times.	2019-07-31 20:02:56 -05:00
Scott Shawcroft	eee759455a	Merge pull request #2018 from keith-packard/snekboard ... Add board support for keithp.com SnekBoard	2019-07-31 16:38:51 -07:00
Jeff Epler	b0f7c7bc4c	Merge remote-tracking branch 'origin/master' into nrf-pwm-audio	2019-07-31 16:32:54 -05:00
Hierophect	06d53ef8a7	minor debugging changes	2019-07-31 17:06:44 -04:00
Hierophect	e2fc55f829	Add baseline HAL I2C support	2019-07-31 14:58:55 -04:00
Dan Halbert	ee518b9141	Merge remote-tracking branch 'adafruit/master' into ble-pairing	2019-07-31 11:22:48 -04:00
Dan Halbert	91d791afd0	cleanup adapter.address; add uniquish suffix to BLE device name	2019-07-31 00:30:24 -04:00
Scott Shawcroft	366fdcce18	Merge pull request #2011 from tannewt/ssd1322 ... Add knobs for SSD1322 and two displayio fixes.	2019-07-30 14:15:37 -07:00
Scott Shawcroft	9dd56b1566	Merge branch 'master' into snekboard	2019-07-30 14:12:08 -07:00
Dan Halbert	83129b8c63	BLE: peripheral client pairing (not yet bonding); fix time doc formatting	2019-07-30 14:26:26 -04:00
wallarug	ecfffac3a8	Delete samd51x19-bootloader-external-flash-crystalless.ld	2019-07-30 19:48:35 +10:00
wallarug	ff6ae1aefb	Update mpconfigboard.mk to use standard linker file	2019-07-30 19:13:33 +10:00
Jeff Epler	b72352949b	PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_	2019-07-29 18:39:00 -04:00
Keith Packard	c6e4ddc88a	boards/snekboard: Delete SPI object reference ... Snekboard does not expose any pins for SPI to the user, so delete the SPI object reference as that won't work. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:45:52 -07:00
Keith Packard	9a37c8a4b3	boards/snekboard: Add pin aliases for UART and I2C ... Allow users to use TX/RX and SDA/SCL names. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:45:06 -07:00
Keith Packard	4387ecfdfb	Update snekboard PID to official value ... Snekboard has been assigned the following PIDs: PID 0x004D # bootloader PID 0x804D # arduino PID 0x804E # circuitpython Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:15:18 -07:00
Keith Packard	326df70ac2	Fix snekboard names ... Manufacturer -- keithp.com Product -- snekboard Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:15:18 -07:00
Keith Packard	56f710f64f	Add board support for keithp.com SnekBoard ... This is another SAMDG2118A design with built-in 9V motor controllers that are designed to be used with Lego PowerFunctions devices. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:14:37 -07:00
Hierophect	6c7723905c	Add temp status LEDs	2019-07-29 11:21:35 -04:00
wallarug	dc1eb73ee7	Merge branch 'master' into wallarug-robohat	2019-07-29 21:53:49 +10:00
wallarug	8974c7e843	Added BUTTON to pins.c	2019-07-29 16:37:53 +10:00
wallarug	9e0bea405d	Added BUTTON to pins.c	2019-07-29 16:37:21 +10:00
wallarug	4d30efdc2a	Updated pins.c for GROVE.	2019-07-29 16:29:48 +10:00
wallarug	8838e25cb2	Update pins.c	2019-07-29 16:28:35 +10:00
sommersoft	8eab946c5b	Merge pull request #2003 from C47D/travis_check_new_boards ... Add check to travis to make sure new boards are built, fix #1886	2019-07-28 22:41:59 -05:00
Dan Halbert	28ca05ccdc	allow discovery from central or peripheral	2019-07-27 13:22:15 -04:00
wallarug	0f30070d58	updated naming schema to match other boards	2019-07-27 17:44:42 +10:00
wallarug	b06fa48735	updated a few files	2019-07-27 16:59:07 +10:00
wallarug	9c57f52d1e	updated pins.c for robohat	2019-07-27 16:56:03 +10:00
wallarug	24e84adc6d	further robohat cleanups	2019-07-27 16:38:47 +10:00
wallarug	e2b83e2dd9	minor changes robohat d21	2019-07-27 16:36:13 +10:00
wallarug	36008de2ed	added custom ld file for samd51 no crystal, ext flash	2019-07-27 16:29:30 +10:00
wallarug	eda3423e35	updated to v1.7 board (samd51)	2019-07-27 16:27:41 +10:00
Hierophect	343d5aa0ac	Delete redundant file	2019-07-26 16:48:23 -04:00
Hierophect	90b1701b6c	Add CDC REPL access	2019-07-26 14:06:27 -04:00
Jeff Epler	a183425e00	ports/nrf: Implement audioio.AudioOut using PWM ... This implements AudioOut, with known caveats: * pause/resume are not yet implemented (this is just a bug) * at best, the sample fidelity is 8 bits (this is a hardware limitation) Testing performed: My test system is a Particle Xenon with a PAM8302 op-amp https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no analog filtering between the Xenon's PWM pin and the "A+" input of the amplifier; the "A-" pin is disconnected. It is powered from VUSB. I used pin D4, which is *NOT* listed as a low-speed-only pin, but the code does NOT switch the pin to high drive. This is related to an open issue for general inability to set drive level for pins being used by a "special function" on nrf: https://github.com/adafruit/circuitpython/issues/1270 Nothing about the code I've written should limit the usable pins. All samples I played were 16-bit, generally monophonic at 11025Hz and 22050Hz from the Debian LibreOffice package.	2019-07-26 07:57:11 -05:00
Jeff Epler	2bc704fe07	ports/nrf: factor out routines for allocating, freeing pwm channels	2019-07-26 07:52:37 -05:00
Scott Shawcroft	c61c874a6d	Reduce feather_m0_supersized build size ... Make it match feather_m0_express	2019-07-26 00:31:41 -07:00
Scott Shawcroft	a87094e01f	Turn off GC opt to save space on Trinket Haxpress	2019-07-25 22:56:46 -07:00
Scott Shawcroft	4e7de436b4	Update constructors of boards with displays	2019-07-25 22:48:11 -07:00
Scott Shawcroft	d99d3bd471	Merge pull request #2010 from jepler/audiocore ... audiocore: Factor from audioio	2019-07-25 13:52:30 -07:00
Jeff Epler	6b44e40ee8	audiocore: Factor from audioio ... When nrf pwm audio is introduced, it will be called `audiopwmio`. To enable code sharing with the existing (dac-based) `audioio`, factor the sample and mixer types to `audiocore`. INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must be imported from `audiocore`, not `audioio`.	2019-07-25 06:44:26 -05:00
Scott Shawcroft	8ec2d6ce49	Merge pull request #2007 from hierophect/F4xx-port-setup ... Add STM32 Discovery F412ZG and F411RE support	2019-07-24 18:49:48 -07:00
Hierophect	295afaaf6c	Update SystemCoreClock macro	2019-07-24 16:31:25 -04:00
Hierophect	981398406c	Implement working (if useless) USB on F411	2019-07-24 16:23:35 -04:00
Hierophect	21f1ae51df	Merge in PR edits	2019-07-24 15:02:26 -04:00
Hierophect	d66c9590af	Merge tinyusb changes from upstream	2019-07-24 14:54:22 -04:00
Hierophect	a63df51893	Requested changes, general cleanup	2019-07-24 14:21:27 -04:00
hathach	c921f6637f	update tinyusb lib to 0.5.x	2019-07-24 16:46:31 +07:00
Hierophect	267468834d	Pin down some TUSB issues	2019-07-23 19:40:26 -04:00
Hierophect	0dee1a1646	Setup for changes	2019-07-23 17:04:03 -04:00
Hierophect	f9b5a9af4e	Merge branch 'F3xx-port-setup' into f411re-tinyusb	2019-07-23 15:17:18 -04:00
Hierophect	5cfde7b6ea	Switch to submodule for cube files	2019-07-23 14:37:30 -04:00
Hierophect	9c1487cff6	Python doc generator fixes	2019-07-23 13:48:59 -04:00
Dan Halbert	82ab998cd5	Merge pull request #1998 from tannewt/monocolor ... Add support for grayscale displays	2019-07-22 22:30:28 -04:00
Scott Shawcroft	7cb2aa2d62	Merge pull request #1986 from AnthonyDiGirolamo/patch-1 ... Update Arch Linux ARM compiler installation instructions	2019-07-22 19:29:53 -07:00
Hierophect	a3673cc79b	Set up for new tinyusb integration. Not yet functional.	2019-07-22 17:16:33 -04:00
Hierophect	58630a844a	Add feature conditionals and clean up	2019-07-22 12:58:28 -04:00
Tavish Naruka	e4d92a3aad	Fix incorrect preprocessor define NRFX_TIMER3/4 ... Should be NRF_TIMER3 and NRF_TIMER4	2019-07-22 20:07:05 +05:30
Scott Shawcroft	1d1b8703b6	Review feedback including NO_BRIGHTNESS_COMMAND macro	2019-07-19 16:11:13 -07:00
Scott Shawcroft	b9b9ef227f	Turn off bitbanging on Hallowing to save code space.	2019-07-19 16:10:33 -07:00
Scott Shawcroft	cdfc169ab6	Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.	2019-07-19 16:10:32 -07:00
Scott Shawcroft	6797ec6ed3	Add support for grayscale displays that are < 8 bit depth. ... This also improves Palette so it stores the original RGB888 colors. Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly useful for the SSD1306. Fixes #1828. Fixes #1956	2019-07-19 16:06:11 -07:00
Hierophect	10b9ca5a92	pin selection cleanup, tinyUSB update	2019-07-19 15:09:45 -04:00
Scott Shawcroft	a98bfa628e	Merge pull request #2002 from ntavish/blip_improvements ... Blip improvements	2019-07-19 10:52:08 -07:00
Tavish Naruka	724ce4acba	enable libraries needed by BlipBoy Shield	2019-07-19 18:48:08 +05:30
Hierophect	734012aa8b	Makefile cleanup	2019-07-18 17:55:57 -04:00
Hierophect	755b86e38b	Deinit-capable USB on 411	2019-07-18 17:17:46 -04:00
Hierophect	43e8a4110f	Add missing files for DigitalIO	2019-07-17 14:18:01 -04:00
Hierophect	45e73c414a	fix gitignore	2019-07-17 14:14:03 -04:00
Hierophect	c588cc6db0	first pass of DigitalIO	2019-07-17 14:07:33 -04:00
Dan Halbert	364ee62d10	Address review comments.	2019-07-16 19:53:36 -04:00
Dan Halbert	1cf8a3e8d8	Merge remote-tracking branch 'adafruit/master' into ble-scanner	2019-07-11 18:42:16 -04:00
Hierophect	f31a0d9cf5	Serial REPL support	2019-07-11 13:41:10 -04:00
siddacious	d12e1a8d74	Merge pull request #1990 from kattni/pyruler ... Adding PyRuler to CircuitPython.	2019-07-10 12:28:43 -07:00
Hierophect	a0e6975b9d	Add some usb reference material, non functional	2019-07-10 14:26:57 -04:00
Kattni Rembor	582acdaa0a	Requested changes.	2019-07-09 16:12:24 -04:00
Kattni Rembor	d905958db1	Adding PyRuler to CircuitPython.	2019-07-09 16:02:39 -04:00
Scott Shawcroft	6fad383367	Merge pull request #1925 from C47D/rgb_status ... Initial support for RGB led as Status indicator, fixes #1382	2019-07-09 10:31:34 -07:00
Hierophect	7742a97c22	Add STM32F412-DISCO support, cleanup	2019-07-09 13:03:22 -04:00
Scott Shawcroft	f0cf9a4e75	Merge pull request #1988 from jandjstudios/datum ... Add support for boards in the datum series.	2019-07-09 09:33:13 -07:00
Dan Halbert	6a001786a9	merge from master	2019-07-09 08:58:49 -04:00
Dan Halbert	118b26b335	UARTClient now works both directions	2019-07-09 00:21:46 -04:00
Scott Shawcroft	f4a64a2e80	Merge pull request #1989 from rce1086/master ... Added conditional compilation around selection of TX pad candidates	2019-07-08 14:07:04 -07:00
Carl Elkins	64507207da	Added conditional compilation around selection of TX pad candidates ... Original code was correct for SAMD21 New code for SAMD51 only permits pad-0 for TX	2019-07-08 02:08:39 +01:00
Dan Halbert	09ddff8df1	WIP: Need descriptors for Central CCCD discovery; not done yet	2019-07-07 00:07:47 -04:00
jandjstudios	46b7575550	Initial commit to support boards in the datum series.	2019-07-06 13:41:03 -07:00
Scott Shawcroft	5610e05b8c	Fix up nrf so that it is initialized properly. Also, do not reset ... it's pins.	2019-07-06 12:48:16 -07:00
iot49	4c72a3991e	updated samd and esp8266 ports	2019-07-05 10:01:51 -07:00
Anthony DiGirolamo	55f15e3c05	Update Arch Linux ARM compiler installation instructions ... - Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example - Add `arm-none-eabi-newlib` as a required package for Arch - Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/) as an optional package. Without it users will get errors about missing header files like: ``` In file included from asf4/samd51/include/samd51j19a.h:49, from asf4/samd51/include/sam.h:38, from ./mpconfigport.h:31, from ../../py/mpconfig.h:45, from ../../py/emitnx64.c:3: /usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory 9 | # include_next <stdint.h> | ^~~~~~~~~~ compilation terminated. ```	2019-07-04 11:14:50 -07:00
Chris Osterwood	97e7fea517	Change pin names to be more descriptive	2019-07-04 13:23:57 -04:00
Chris Osterwood	539502c891	Remove pin reservations. Prevents used from inside of CircuitPython code	2019-07-04 13:22:36 -04:00
iot49	6e5d70fa19	changed type of receiver_buffer_size to uint16_t	2019-07-03 12:02:01 -07:00
Dan Halbert	bf8a35b2f8	WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service	2019-07-02 22:34:54 -04:00
Hierophect	040acc3a32	remove dependencies for stable build	2019-07-01 19:47:10 -04:00
Radomir Dopieralski	e45eac5016	Switch the terminal font for ugame10 ... I designed this really tiny, minimalist font for use on very small displays. On uGame it lets one see the whole text that CircuitPython prints on boot. The characters are 4x6 pixels each, and they are optimized for legibility (large x-height, right angles, blocky shapes). It might make sense to also use that font in other boards.	2019-07-01 23:05:07 +02:00
Dan Halbert	6ea01ea9b0	Central is connecting; characteristics can be read and written	2019-06-29 00:20:06 -04:00
Hierophect	94a2eff05c	remove build, fix link issues)	2019-06-28 19:22:23 -04:00
Hierophect	04a9bc0d35	case changes	2019-06-28 16:45:07 -04:00
Hierophect	b93f93f174	name change but actually	2019-06-28 16:34:27 -04:00
Hierophect	caed59ec64	name change	2019-06-28 16:21:13 -04:00
Hierophect	16ba035ba7	first commit, very crude	2019-06-28 15:36:08 -04:00
Scott Shawcroft	0cce7fcaa3	Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402	2019-06-27 14:06:26 -07:00
Scott Shawcroft	fe507db45f	Shrink pIRkey build down. ... Rollback HID to save string space and remove board mapping for default buses that don't exist.	2019-06-26 16:49:23 -07:00
Scott Shawcroft	d3adfde22a	Merge pull request #1968 from adafruit/4.0.x ... Merge in nrf neopixel fix	2019-06-25 11:35:58 -07:00
Dan Halbert	140904ec84	getting Scanner to work	2019-06-22 22:10:15 -04:00
Dan Halbert	4881e1ff55	WIP: Central compiles; now will test	2019-06-21 18:04:04 -04:00
Dan Halbert	23bd861c9a	nrf: fix neopixel_write pwm buf size calc	2019-06-20 18:02:14 -04:00
Dan Halbert	24ac1fdcab	WIP: backup only; not compiled	2019-06-19 21:54:28 -04:00
Scott Shawcroft	7ad229ec27	Merge pull request #1958 from tannewt/pygamer_advanced ... Add PyGamer Advance and fix Joystick pins	2019-06-19 12:32:36 -07:00
Dan Halbert	a1b5d800f3	Update copyrights; get ready for Central	2019-06-19 10:42:36 -04:00
Dan Halbert	35b9191857	Don't operate directly on bleio objects in shared-bindings: use common_hal ... routines instead. Changes made but not yet tested.	2019-06-18 23:46:20 -04:00
Scott Shawcroft	5e5252ced0	Merge pull request #1955 from pewpew-game/pygamer-stage ... Add support for PyGamer to Stage library	2019-06-18 18:23:08 -07:00
Scott Shawcroft	352bf7eaf5	Add PyGamer Advance and fix Joystick pins	2019-06-18 12:22:20 -07:00
Radomir Dopieralski	5803245009	Add support for PyGamer to Stage library	2019-06-18 19:05:51 +02:00
Dan Halbert	1356819de1	Handle None for BLE name; fix ScanEntry bug; compile issue	2019-06-17 23:16:40 -04:00
Scott Shawcroft	2dddccb99e	Update board inits for new api.	2019-06-17 18:03:30 -07:00
brentru	ea2c068e11	COLMOD is 1 param, remove CASET/RASET in CircuitPython	2019-06-17 11:20:25 -04:00
brentru	207dc885a6	removed incorrect gamma code, looks better now	2019-06-14 16:34:30 -04:00
brentru	4092294e7c	tft working init. sequence, still undersaturated	2019-06-14 16:17:05 -04:00
brentru	0bc74172a2	Add pybadge airlift, sans-tft	2019-06-14 14:46:19 -04:00
Dan Halbert	bed6d43a76	merge from upstream; WIP redo Address; no more AddressType	2019-06-13 21:55:07 -04:00
Scott Shawcroft	0b1f605a9b	Turn off gc opt for more M0 boards	2019-06-12 13:20:21 -07:00
Scott Shawcroft	a91ad05774	Change to one lto partition for ultimate optimization.	2019-06-12 11:37:46 -07:00
Scott Shawcroft	eb21fc3e31	Add partial display update support. ... Different operations to the display tree have different costs. Be aware of these costs when optimizing your code. * Changing tiles indices in a TileGrid will update an area covering them all. * Changing a palette will refresh every object that references it. * Moving a TileGrid will update both where it was and where it moved to. * Adding something to a Group will refresh each individual area it covers. * Removing things from a Group will refresh one area that covers all previous locations. (Not separate areas like add.) * Setting a new top level Group will refresh the entire display. Only TileGrid moves are optimized for overlap. All other overlaps cause sending of duplicate pixels. This also adds flip_x, flip_y and transpose_xy to TileGrid. They change the direction of the pixels but not the location. Fixes #1169. Fixes #1705. Fixes #1923.	2019-06-12 11:32:39 -07:00
Dan Halbert	ba1b36a800	Uncomment vm.c SUPEROPT (debugging typo); trim a few builds	2019-06-12 13:09:09 -04:00
Dan Halbert	1bb4fccc3b	Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files	2019-06-12 11:08:22 -04:00
Dan Halbert	0b3f29780a	shrink a bunch of builds to fit	2019-06-11 18:46:06 -04:00
Dan Halbert	4fc189b60c	Merge latest 4.0.x fixes into master	2019-06-11 16:16:29 -04:00
shazz	9c49af0597	Added pin for SD CS	2019-06-08 12:04:27 -04:00
Dan Halbert	62de2506e4	Include display objects in gc.	2019-06-06 17:49:32 -04:00
Dan Halbert	1905d90eaa	Make advertising data buffers long-lived	2019-06-05 20:08:53 -04:00
Elvis Pfützenreuter	1da8d4b4da	Add PS/2 support -- ps2io module	2019-06-04 18:05:46 -03:00
Tavish Naruka	4a7122d354	boards: add support for Electronut labs Blip ... Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>	2019-06-05 00:49:29 +05:30
Dan Halbert	613e12f99f	Replace Broadcaster with enhanced Peripheral	2019-06-03 20:40:05 -04:00
Dan Halbert	63ac37946d	1. Remove advertising data construction in C: it's all done in Python now ... 2. Add scan response capability to advertising.	2019-06-02 23:21:30 -04:00
Dan Halbert	bcda5e133d	Merge pull request #1903 from tannewt/get_area ... Rework the pixel computation to use areas	2019-05-31 21:27:06 -04:00
Dan Halbert	12f1d9d30c	fix advertisement length check; add Service.secondary attribute	2019-05-31 18:03:05 -04:00
Dan Halbert	4e85c1ef91	Implement forced clean builds for boards so designated. ... Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds. Fixes #1910.	2019-05-24 15:32:24 -04:00
Dan Halbert	6cec81bcb5	Need to enable ble before scanning	2019-05-23 22:05:16 -04:00
Dan Halbert	e84f3b1c6a	make crickit cpx pinyin build fit	2019-05-23 21:22:50 -04:00
Dan Halbert	1639354e5f	Scanner working, but not very first time	2019-05-23 16:07:54 -04:00
Scott Shawcroft	3fad7de8db	Rework the pixel computation to use areas ... This changes the displayio pixel computation from per-pixel to per-area. This is precursor work to updating portions of the screen (#1169). It should provide mild speedups because bounds checks are done once per area rather than once per pixel. Filling by area also allows TileGrid to maintain a row-associative fill pattern even when the display's refresh is orthogonal to it.	2019-05-21 17:41:06 -07:00
Dan Halbert	0199d9810b	Make pinyin fit on cpx	2019-05-21 15:18:56 -04:00
Dan Halbert	008bbc944c	correct USB PIDs for several boards	2019-05-16 10:54:15 -04:00
Scott Shawcroft	f3ab820fc2	Merge pull request #1884 from CapableRobot/capablerobot-usbhub ... Added board definition for Capable Robot Programmable USB Hub	2019-05-14 13:42:51 -07:00
Chris Osterwood	a0497553fc	Fix to prevent critical pins from being reset when MCU restarts or enters REPL	2019-05-14 15:23:33 -04:00
Chris Osterwood	420dbafa9d	Added board definition for Capable Robot Programmable USB Hub	2019-05-14 13:28:24 -04:00
sabas1080	9f082ba5cb	Fix pin lost	2019-05-13 10:18:53 -05:00
Scott Shawcroft	36e2faf8d2	Merge pull request #1873 from ElectronicCats/escornabot_makech ... Add Escornabot Makech of Electronic Cats	2019-05-10 12:39:58 -07:00
sabas1080	d174ce8821	Update pins define	2019-05-10 13:34:02 -05:00
Scott Shawcroft	67007282c9	Tighten down inlining on the pIRkey	2019-05-10 11:19:27 -07:00
Scott Shawcroft	80a752da87	Merge latest adafruit/master in.	2019-05-10 10:09:56 -07:00
Scott Shawcroft	9feb844b7e	Fix crash in internal filesystem on nrf ... Fixes #1842	2019-05-08 15:43:18 -07:00
sabas1080	27ea1df710	Init escornabot	2019-05-08 15:48:17 -05:00
Scott Shawcroft	9ba8191a04	Merge pull request #1855 from dhalbert/frequencyin-no-double-arith ... avoid double float arithmetic in FrequencyIn	2019-05-08 14:40:18 -04:00
sabas1080	08a170388d	fix VID and PID inverted	2019-05-08 10:09:49 -05:00
Dan Halbert	f59dadbb4f	avoid double float arithmetic in FrequencyIn	2019-05-07 00:25:22 -04:00
ladyada	ed8e6e8f45	re-add i2s (its J not G!)	2019-04-29 20:30:53 -04:00
ladyada	fa3a52bc1e	similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)	2019-04-29 20:29:48 -04:00
wallarug	aa3c28787c	removed problem libraries from frozen build.	2019-04-28 00:09:13 +10:00
wallarug	b4a70daf17	updated lots	2019-04-27 22:35:12 +10:00
wallarug	cd4aaa13a3	added robohatmm1 board defs.	2019-04-25 21:13:41 +10:00
ladyada	9b593cd154	update periph submodule	2019-04-23 18:20:13 -04:00
ladyada	a5697470e1	fix up pybadge for final release board (swap backlite and reset)	2019-04-23 16:43:20 -04:00
Dan Halbert	15b7946fc4	Off-by-one error for usage of MAX_TX_IN_PROGRESS	2019-04-22 22:07:48 -04:00
Scott Shawcroft	f548305c07	Merge pull request #1815 from dhalbert/stop-flicker ... Turn off auto_brightness if brightness is set	2019-04-18 15:48:39 -07:00
Dan Halbert	0113e0970e	add Display.__init__() args for brightness and auto_brightness	2019-04-18 15:59:16 -04:00
Scott Shawcroft	f7c7904e2b	Correct call structure for throwing errors	2019-04-17 13:54:29 -07:00
Carlos	71c4f100de	Update translations and use same error for PDM too	2019-04-17 11:28:43 -07:00
Carlos	5865b28592	[audiobusio-I2SOut] Fix translation error	2019-04-17 11:12:38 -07:00
Carlos	65cc366280	[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg	2019-04-17 11:12:38 -07:00
Carlos	9f63125345	Fix I2SOut message, fix #1765	2019-04-17 11:12:38 -07:00
Scott Shawcroft	713a38d1a2	Merge pull request #1754 from dmazzella/dmazzella-patch-1 ... add support for USER_C_MODULES	2019-04-17 09:41:20 -07:00
Dan Halbert	6684a3c723	Merge pull request #1778 from pewpew-game/gamepad-shift ... Add GamePadShift for handling shift-register-based buttons	2019-04-17 10:22:24 -04:00
Scott Shawcroft	608bf5076b	Merge pull request #1804 from ITACAInnovation/master ... Merging updates	2019-04-16 13:54:40 -07:00
Dan Halbert	c0ce820974	Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3 ... Circuitpython nickzoic 1042 nrf nvm bytearray 3	2019-04-16 15:05:18 -04:00
Scott Shawcroft	2fa1bf4351	Merge remote-tracking branch 'adafruit/master' into gamepadshift	2019-04-16 11:23:41 -07:00
Scott Shawcroft	55782901d0	Actually call gamepadshift_tick	2019-04-16 11:15:42 -07:00
Scott Shawcroft	f58446e937	Merge branch 'master' into master	2019-04-16 10:32:38 -07:00
Scott Shawcroft	7822d013cd	Merge pull request #1798 from ntavish/papyr ... Add support for Electronut Labs Papyr.	2019-04-16 10:13:19 -07:00
Scott Shawcroft	0e03a321e4	Fully split gamepadshift from gamepad	2019-04-16 10:11:54 -07:00
ITACA Innovation S.R.L	2d303213ed	Add files via upload	2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L	4f5a7ffe46	Updates: VID&PID, pinout ... Changed VID & PID to new ones. Changed the layout accordingly to the prototype version.	2019-04-16 16:45:47 +02:00
Tavish Naruka	32a0855d18	Add support for Electronut Labs Papyr. ... Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>	2019-04-16 12:59:42 +05:30
Nick Moore	9c42a72275	Fix up single-byte access to nvm.ByteArray	2019-04-16 14:53:44 +10:00
Nick Moore	83dad37562	Fixups for adafruit/circuitpython#1042	2019-04-16 14:53:44 +10:00
Nick Moore	02dd32da60	Make some space for NVM adafruit/circuitpython#1042	2019-04-16 14:53:44 +10:00
Nick Moore	f22c01a05e	Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write ... adafruit/circuitpython#1610	2019-04-16 14:53:44 +10:00
Nick Moore	66e8ceafad	switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write ... adafruit/circuitpython#1610	2019-04-16 14:53:44 +10:00
Nick Moore	fd83cf2048	Add a peripherals/nrf/nvm.c to wrap flash page writes safely	2019-04-16 14:53:44 +10:00
Nick Moore	d0e5af3b09	Working flash pages for nvm.ByteArray adafruit/circuitpython#1042 ... import microcontroller def dump(n = microcontroller.nvm): for i in range(0,len(n)): print ("%02X " % n[i], end="") if i % 16 == 15: print('') microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512 microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024 microcontroller.nvm[4090:4101] = b'thisisatest' microcontroller.nvm[100:105] = b'hello' microcontroller.nvm[8000:8007] = b'goodbye' dump()	2019-04-16 14:53:44 +10:00
Nick Moore	531cf7eb4c	switch CIRCUITPY_NVM on!	2019-04-16 14:53:44 +10:00
Nick Moore	933500c448	nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042	2019-04-16 14:53:44 +10:00
Nick Moore	df89156f2f	Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)	2019-04-16 14:53:44 +10:00
Scott Shawcroft	254d0a53ac	Revert "nrf nvm: touchups to nickzoic PR #1768"	2019-04-15 18:50:33 -07:00
Scott Shawcroft	c927e6b938	Split GamePadShift from GamePad to save space on most boards.	2019-04-15 15:40:06 -07:00
Scott Shawcroft	22889ca29a	Merge pull request #1790 from pewpew-game/pybadge-stage ... Enable _stage module and freeze stage library on the PyBadge	2019-04-15 14:25:50 -07:00
Scott Shawcroft	7573da03f6	Merge pull request #1779 from dhalbert/nrf-nvm-2 ... nrf nvm: touchups to nickzoic PR #1768	2019-04-15 14:23:35 -07:00
Radomir Dopieralski	ade6bd8185	Enable _stage module and freeze stage library on the PyBadge	2019-04-15 14:38:02 +02:00
siddacious	5135ee52d9	Changing to support for CP32-M4 wrover	2019-04-14 19:45:44 -07:00
Radomir Dopieralski	eeef5359f9	Merge branch 'master' into gamepad-shift	2019-04-13 11:54:25 +02:00
Dan Halbert	f8473f4a39	Merge pull request #1788 from tannewt/pinyin ... Add Chinese (Pinyin) and slim down boards so it fits	2019-04-12 20:36:59 -04:00
Scott Shawcroft	defc6dceb0	Slim down feather m0 express	2019-04-12 16:18:08 -07:00