circuitpython

Author	SHA1	Message	Date
Jeff Epler	5729097bc4	atmel-samd: enable build error for implicit fallthrough If any diagnostics occur, we will want to either add `/* FALLTHROUGH */` or `break;` as appropriate. I only tested a few builds (trinket m0 and metro m4 express)	2020-09-12 15:11:29 -05:00
Jeff Epler	cacb0124ac	feather_m4_express: Use quad data mode on flash Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed. Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.	2020-09-10 20:20:21 -05:00
Scott Shawcroft	9e722c8c99	Merge pull request #3375 from DavePutz/issue3296 Correction for Issue #3296 - ble hanging on nrf52840	2020-09-10 12:36:17 -07:00
Jerry Needell	2529ee2359	freeze rfm69 and bus_device libraries int feather_m0_rfm69	2020-09-09 14:54:20 -04:00
Jeff Epler	b49099c8f3	additional asf4 updates	2020-09-08 15:31:13 -05:00
Jeff Epler	e066448e36	atmel-samd: add same51, feather_m4_can This is compile-tested, and requires updates in the related submodules: https://github.com/adafruit/samd-peripherals/pull/35 https://github.com/adafruit/asf4/pull/37 This should not be merged until those can also be merged.	2020-09-08 13:06:45 -05:00
root	2690faec43	Moved checks for invalid pin to common-hal/microcontroller/Pin.c	2020-09-05 11:42:06 -05:00
Dan Halbert	42df254683	Merge pull request #3373 from dhalbert/trellis-m4-board-i2c fix pins for trellis_m4 board.I2C()	2020-09-04 11:15:18 -04:00
Dan Halbert	960888a3bd	fix pins for trellis_m4 board.I2C()	2020-09-03 14:22:18 -04:00
Scott Shawcroft	786f4ed114	Merge pull request #3344 from jepler/issue-3184 Fix RGBMatrix, FrameBufferDisplay bugs	2020-09-02 15:32:30 -07:00
Scott Shawcroft	f0e60da51f	Merge pull request #3310 from dhalbert/ble_hci _bleio HCI implementation	2020-09-01 11:28:05 -07:00
Jeff Epler	952d9bbb4a	samd: Ignore a maybe-uninitialized diagnostic in asf4 I encountered this when changing optimization flags for debugging purposes. The diagnostic appears spurious and unrelated to what I'm debugging.	2020-09-01 10:55:45 -05:00
Jeff Epler	ad4bf75367	samd: only set NDEBUG for non-debug builds	2020-09-01 10:55:45 -05:00
Dan Halbert	4ac7650f22	matrix portal board	2020-08-31 23:56:38 -04:00
Dan Halbert	6dbd369272	merge from upstream	2020-08-30 14:39:03 -04:00
lady ada	81870413af	add default I2C	2020-08-28 19:08:36 -04:00
Lucian Copeland	8021da08d3	Fix problematic whitespace on pulseout parameter errors	2020-08-27 11:07:47 -04:00
Scott Shawcroft	0cc438e6b9	Fix pycubed pwm use	2020-08-24 18:29:34 -07:00
root	fe0f79adce	Making requested modifications	2020-08-21 20:38:19 -05:00
Scott Shawcroft	a5b01f7361	Merge remote-tracking branch 'adafruit/main' into add_pwmio	2020-08-21 11:13:53 -07:00
Dan Halbert	58573a70e1	bring submodules up to date	2020-08-21 11:10:33 -04:00
Dan Halbert	f714f53552	Merge remote-tracking branch 'adafruit/main' into ble_hci	2020-08-21 10:45:05 -04:00
Dan Halbert	0e30dd8bcc	merge from upstream; working; includes debug_out code for debugging via Saleae for posterity	2020-08-20 20:29:57 -04:00
Jeff Epler	ba2db853a4	Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory Update mini sam m4 memory	2020-08-20 19:05:39 -05:00
root	6eae7ce78f	Requested changes to pulsein	2020-08-20 16:57:00 -05:00
Benjamin Shockley	135626a038	Update mpconfigboard.mk Added support for second type of memory chip.	2020-08-20 13:50:52 -05:00
Scott Shawcroft	400701004b	Merge pull request #3279 from hierophect/esp32-pulseinout ESP32-S2: Add PulseOut and PulseIn	2020-08-20 11:24:08 -07:00
Scott Shawcroft	31a3d0e815	Merge pull request #3304 from jepler/count-usb-descriptors Add usb-endpoint-count checking	2020-08-20 11:21:01 -07:00
Scott Shawcroft	a86d6aeac4	Merge pull request #3303 from jepler/samd-tinyusb-family SAM E54: Use correct CFG_TUSB_MCU	2020-08-20 11:13:05 -07:00
Jeff Epler	23aefe9509	Add usb-endpoint-count checking .. however, the number of endpoints is only set for SAMD (8). Other ports need to set the value. Otherwise, the build will show the message ``` Unable to check whether maximum number of endpoints is respected ```	2020-08-19 16:47:40 -05:00
Jeff Epler	6ae5bedf3b	SAM E54: Use correct CFG_TUSB_MCU This doesn't actually change the code that is built, but it is "more correct".	2020-08-19 11:27:52 -05:00
Scott Shawcroft	6857f98426	Split pulseio.PWMOut into pwmio This gives us better granularity when implementing new ports because PWMOut is commonly implemented before PulseIn and PulseOut. Fixes #3211	2020-08-18 13:08:33 -07:00
Lucian Copeland	da75445cd5	Style changes, reposition runtime errors	2020-08-18 11:42:06 -04:00
Scott Shawcroft	d01f5dc0bd	Turn off terminalio for ja and ko The font is missing many characters and the build needs the space. We can optimize font storage when we get a good font. The serial output will work as usual.	2020-08-17 17:17:59 -07:00
Brent Rubell	b1a8fb83fa	Merge pull request #3251 from jerryneedell/jerryn_rfm9x RFM9x -- freeze library into build	2020-08-17 17:11:35 -04:00
Dan Halbert	16ff7b167c	bdmicro_vina_m0: inline limit 60 -> 50 The ja translation was not fitting.	2020-08-17 10:05:25 -04:00
Lucian Copeland	0fc730bc5a	Expand PulseOut API, debug cleanup	2020-08-14 16:36:02 -04:00
Dan Halbert	a28d0f6c80	Merge pull request #3273 from jepler/ja-firmware-size Squeeze firmwares to fit the new ja translation	2020-08-13 12:19:28 -04:00
Jeff Epler	239c8ff87f	metro_m0_express: put back audiobusio this now fits locally (though it's very close to capacity); let's see what the CI says. ``` make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja ... 253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB). ```	2020-08-12 19:11:33 -05:00
Scott Shawcroft	7ffa2a103c	Merge pull request #3269 from jepler/sharpdisplay-v2 Sharp Memory Display displayio support (v2)	2020-08-12 16:53:09 -07:00
Jeff Epler	aa0b4f7045	cpx_display: Put back AUDIOBUSIO, take away ROTARYIO AUDIOBUSIO is needed for the on-board mic using PDMIn	2020-08-12 16:17:48 -05:00
Jeff Epler	ea8e9b8cef	metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO Dan notes that this is more frequently the solution we've chosen	2020-08-12 16:17:13 -05:00
Jeff Epler	299894025a	stringcar_m0_express: make ja translation fit	2020-08-12 13:47:10 -05:00
Jeff Epler	f08ee0db20	itsybitsy_m0_express: make ja translation fit again	2020-08-12 13:44:00 -05:00
Jeff Epler	7bd42244c9	snekboard: make ja translation fit	2020-08-12 13:34:36 -05:00
Jeff Epler	45f6bc1f3e	serpente: make ja translation fit	2020-08-12 13:32:08 -05:00
Jeff Epler	36bfbaae69	feather_radiofruit_zigbee: make ja translation fit	2020-08-12 13:28:30 -05:00
Jeff Epler	58a1361d3e	Merge remote-tracking branch 'origin/main' into ja-firmware-size	2020-08-12 13:26:12 -05:00
Jeff Epler	813dcd1b73	trinket_m0_haxpress: make ja translation fit	2020-08-12 12:44:17 -05:00
Jeff Epler	88f222f1a1	metro_m0_express: make ja translation fit	2020-08-12 12:38:17 -05:00
Jeff Epler	ba91023fff	itsybitsy_m0_express: make ja translation fit	2020-08-12 12:35:29 -05:00
Jeff Epler	6b9f7c9047	hallowing_m0_express: make ja translation fit	2020-08-12 12:29:30 -05:00
Jeff Epler	58afda342d	feather_m0_supersized: make ja translation fit	2020-08-12 11:53:34 -05:00
Jeff Epler	27c2eb1869	feather_m0_express: make ja translation fit	2020-08-12 11:51:56 -05:00
Jeff Epler	8865e4ca97	circuitplayground_express_displayio: make ja translation fit	2020-08-12 11:46:52 -05:00
Jeff Epler	f3748fe20d	circuitbrains_basic_m0: Use optimization flags to let ja translation fit	2020-08-12 11:46:31 -05:00
Jeff Epler	f9d1d9d114	atmel-samd: disable FRAMEBUFFERIO on samd21 .. this disables SHARPMEMORY as well.	2020-08-12 11:15:34 -05:00
Jeff Epler	454e616d13	atmel-samd: disable FRAMEBUFFERIO on samd21 .. this disables SHARPMEMORY as well.	2020-08-12 10:46:56 -05:00
bleeptrack	49407b6c06	trailing spaces fix	2020-08-12 13:42:45 +02:00
bleeptrack	e34fac6645	Whitespace and Newline fix	2020-08-11 23:59:32 +02:00
bleeptrack	228d9b5a12	Fixing indentation	2020-08-11 22:18:15 +02:00
bleeptrack	22ae1dbac8	Removing unnecessary pin ignored	2020-08-11 22:17:17 +02:00
bleeptrack	00676ff5a9	PicoPlanet	2020-08-11 21:49:52 +02:00
Jeff Epler	1cf3762392	Merge remote-tracking branch 'origin/main' into stm32-sdioio	2020-08-10 12:54:12 -05:00
Jerry Needell	1d980d527e	Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x	2020-08-07 12:48:41 -04:00
Jerry Needell	f7961b96a9	update comment	2020-08-06 10:05:18 -04:00
Jerry Needell	c42ffb8f3d	remove usb_hid	2020-08-06 05:44:26 -04:00
Jerry Needell	432f43a472	freeze rfm9x and BusDevice, remove many built-in modules	2020-08-05 11:37:57 -04:00
root	c7b6e66426	Fixes for pulsein tick handling	2020-08-05 10:03:20 -05:00
Jeff Epler	93b373d617	"pop from empty %q" Saves 12 bytes code on trinket m0	2020-08-04 18:42:09 -05:00
Dan Halbert	ac95106b88	service discovery works; need to work on char and descriptor discovery	2020-08-04 18:24:37 -04:00
Jeff Epler	c849b781c0	Combine 'index out of range' messages	2020-08-04 14:45:45 -05:00
Jeff Epler	dddd25a776	Combine similar strings to reduce size of translations This is a slight trade-off with code size, in places where a "_varg" mp_raise variant is now used. The net savings on trinket_m0 is just 32 bytes. It also means that the translation will include the original English text, and cannot be translated. These are usually names of Python types such as int, set, or dict or special values such as "inf" or "Nan".	2020-08-04 13:34:29 -05:00
Jeff Epler	0e2d231445	Merge remote-tracking branch 'origin/main' into stm32-sdioio	2020-08-03 21:01:53 -05:00
Dan Halbert	a995a5c58f	wip: partial discovery responses; compiles; not tested	2020-08-03 21:02:57 -04:00
DavePutz	d7eedc5e38	Merge pull request #20 from adafruit/main Update from main	2020-08-03 13:14:01 -05:00
root	9203a77804	Turn off interrupts while in handler	2020-08-03 11:31:12 -05:00
Dan Halbert	0a60aee3e4	wip: compiles	2020-08-02 11:36:38 -04:00
root	12b81618a3	Changes for getting supervisor ticks	2020-08-01 13:27:02 -05:00
Dan Halbert	1771858f4a	add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes	2020-08-01 13:20:46 -04:00
Dan Halbert	4b71831d8b	SUPEROPT_VM = 0 for de_DE	2020-08-01 12:36:20 -04:00
Jeff Epler	27c6ffb9a2	atmel-samd: gemma, trinket: Make space for de_DE translation	2020-07-30 11:29:47 -05:00
Jeff Epler	d69f081c04	Merge remote-tracking branch 'origin/main' into blm_badge	2020-07-30 07:24:48 -05:00
Jeff Epler	af135a7560	atmel-samd: move samd-specific script	2020-07-30 07:18:02 -05:00
Joey Castillo	8acec2ca35	add descriptive pin names	2020-07-29 13:49:08 -04:00
Joey Castillo	ea9bc9b4b6	set screen orientation to portrait	2020-07-29 13:46:10 -04:00
Dan Halbert	ca9eae8eea	Merge pull request #3209 from pewpew-game/fluff-m0-pins fluff_m0: add pin aliases	2020-07-28 15:15:15 -04:00
Dan Halbert	824a57c6f4	Merge pull request #3218 from tannewt/use_gcc10_peripherals Use samd peripherals fixed for gcc 10	2020-07-28 15:14:20 -04:00
Scott Shawcroft	b30d89131b	Merge pull request #3215 from ansonhe97/main Added display QSTR to Wio Terminal	2020-07-28 11:53:17 -07:00
Dan Halbert	aa97ea2501	Merge remote-tracking branch 'adafruit/main' into blm_badge	2020-07-28 14:15:02 -04:00
Scott Shawcroft	92216d6417	Use samd peripherals fixed for gcc 10	2020-07-28 11:14:25 -07:00
Dan Halbert	e5e132a364	add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT	2020-07-28 11:49:54 -04:00
ansonhe97	e15bcebb6e	Added display QSTR to Wio Terminal	2020-07-28 17:31:17 +08:00
Jerry Needell	945736e9bb	add adjustments for crickit and displayio variants of CPX	2020-07-27 22:13:04 -04:00
Jerry Needell	2bdd62220e	adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice	2020-07-27 21:50:36 -04:00
Scott Shawcroft	f4f2018952	Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2 ndgGarage ndbit6 v2	2020-07-27 15:51:23 -07:00
Scott Shawcroft	7be9837f73	Merge pull request #3193 from ciscorn/type-annotations More type hints	2020-07-27 14:26:54 -07:00
Taku Fukada	d356581651	Fix several type hints	2020-07-27 18:05:13 +09:00
Radomir Dopieralski	b2c4b0bcfa	fluff_m0: don't exclude portb pins explicitly	2020-07-26 17:26:32 +02:00
Radomir Dopieralski	b1b253c012	fluff_m0: add pin aliases Add aliases for SDI, SDO and EN, so that pin names match the text on the PCB to avoid confusion. Also disable all pins from port B, because that package of SAMD21 doesn't have port B.	2020-07-26 13:39:42 +02:00
Dan Halbert	7ab5c520e6	Merge pull request #3190 from DavePutz/opt-test Changes to allow different compiler optimizations per board	2020-07-25 17:03:10 -04:00
Dan Halbert	b7e6bf959e	Merge pull request #3205 from burtyb/commander-2 Add GamePad to Commander board	2020-07-25 16:57:58 -04:00
Chris Burton	c4a5297ee2	Add GamePad to Commander	2020-07-25 17:53:27 +00:00
ikigaisense	6696915801	fix-ndbit6-for-ndbit6_v2	2020-07-25 10:07:33 -06:00
root	c4817968ee	Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test	2020-07-24 23:28:41 -05:00
DavePutz	3dfed3c4aa	Merge pull request #15 from adafruit/main update from main	2020-07-24 20:29:53 -05:00
root	739981b34e	update for pewpew	2020-07-24 17:27:25 -05:00
DavePutz	a14101cd13	Use current mpconfigboard.mk with optimization change	2020-07-24 14:09:09 -05:00
root	b9cdf195e2	board mk file changes	2020-07-24 10:00:42 -05:00
Taku Fukada	54a342a7f5	Add and correct some type hints	2020-07-24 18:20:03 +09:00
root	c937fa1760	fix formatting	2020-07-23 19:29:57 -05:00
root	778e8bfda9	Changes to optimization option	2020-07-23 19:27:02 -05:00
ikigaisense	703fb9d4a1	update-ndGarage_ndbit6_v2	2020-07-23 16:08:30 -06:00
Scott Shawcroft	2bd6d05663	Add externs. GCC10 complains about duplicate defines	2020-07-22 16:26:46 -07:00
root	d83a4ac72d	Changes to add compiler optimization option	2020-07-22 12:44:41 -05:00
DavePutz	39e01c3938	Merge pull request #14 from adafruit/main update from main	2020-07-22 11:30:49 -05:00
Scott Shawcroft	8ff2846bb2	Disable countio on circuitbrains basic	2020-07-21 16:21:49 -07:00
Scott Shawcroft	cb7df2e1ed	Merge pull request #3160 from tannewt/enable_pystack Enable PYSTACK to keep function state out of the heap	2020-07-21 13:38:52 -07:00
Scott Shawcroft	5e3a853db4	Turn off GC opt on uchip board	2020-07-21 12:51:59 -07:00
Scott Shawcroft	678faff464	Be more aggressive with uChip build	2020-07-21 11:02:23 -07:00
root	49decf90c9	Add option for higher optimization levels	2020-07-21 10:11:08 -05:00
Scott Shawcroft	0c6935e336	Merge branch 'main' into disable_network	2020-07-20 16:28:22 -07:00
Scott Shawcroft	12edb57aac	Merge pull request #3166 from theacodes/bhb-adc Add _bhb user module for Big Honking Button	2020-07-20 16:24:36 -07:00
Thea Flowers	7ba89f5330	Add _bhb user module for Big Honking Button BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.	2020-07-18 22:45:08 -07:00
Radomir Dopieralski	11ef43b071	pewpew_m4: Disable USB_HID back German translation fails to build, so I have to disabled USB_HID after all.	2020-07-18 20:09:30 +02:00
Radomir Dopieralski	8d692f33a8	pewpew_m4: Enable analogio and usb_hid The newest version for the Stage library for PewPewM4 no longer contains embedded graphics, which frees enough space in flash to enabled back AnalogIO and also add USB_HID. There is still ~192 bytes left free. If new additions to CircuitPython make it grow further, we can disable USB_HID again.	2020-07-18 19:30:40 +02:00
Scott Shawcroft	610e0171aa	Disable existing native networking. We're moving towards a co-processor model and a Wiznet library is already available. New native APIs will replace these for chips with networking like the ESP32S2 but they won't be these.	2020-07-17 17:43:02 -07:00
Jeff Epler	6912d31560	uchip: reclaim some flash space	2020-07-17 14:32:05 -05:00
Jeff Epler	1df48176ce	supervisor: factor supervisor_background_tasks from sundry ports	2020-07-15 11:49:44 -05:00
Jeff Epler	6160d11c5a	supervisor: factor out, Handle USB via background callback	2020-07-15 11:49:44 -05:00
Jeff Epler	742aa740f6	samd: audio: Move to background callback Testing performed: Played half of the Bartlebeats album :) :)	2020-07-15 09:26:47 -05:00
Scott Shawcroft	51c888d4be	Merge pull request #3003 from Flameeyes/master License tagging according to REUSE specifications.	2020-07-13 16:28:49 -07:00
Dan Halbert	3fcd999130	Merge pull request #3130 from pewpew-game/brownout-level SAMD: make the brownout detection level configurable per board	2020-07-13 16:26:11 -04:00
Dan Halbert	f6869c69c5	wip: advertising; not tested	2020-07-12 19:45:23 -04:00
Radomir Dopieralski	742f9cfdb0	Fluff M0: additional pins on version 1.3 of the board	2020-07-10 20:40:58 +02:00
Radomir Dopieralski	e0733d153e	SAMD: configurable brownout, separate the variables	2020-07-09 12:17:07 +02:00
Radomir Dopieralski	83a27edd20	SAMD: make the brownout detection level configurable per board Not all boards have external flash or other components that make them require 2.7V -- sometimes we can get considerably longer battery life by decreasing this requirement. In particular, pewpew10 and pewpew_m4 are powered directly from battery, with no LDO, and should work fine down to 1.6V.	2020-07-08 19:59:53 +02:00
Scott Shawcroft	965a4961ce	Merge pull request #3120 from DavePutz/issue#3049 Issue#3049 -PulseIn not working in CP5.4	2020-07-07 08:59:22 -07:00
DavePutz	0932b64ae7	Correct for SAMD51 build	2020-07-06 23:25:33 -05:00
DavePutz	1b3cb17abd	Corrected file for SAMD51 build	2020-07-06 21:47:11 -05:00
DavePutz	ab4a453006	Made requested changes	2020-07-06 21:40:38 -05:00
Scott Shawcroft	846f01b2c8	Merge pull request #3113 from ansonhe97/main ADD: Added Wio Terminal's functional pins and LCD driver to board init	2020-07-06 14:50:47 -07:00
Diego Elio Pettenò	34b4993d63	Add license to some obvious files.	2020-07-06 19:16:25 +01:00
Radomir Dopieralski	2f80460a2f	Fluff M0: additional pins on version 1.3 of the board	2020-07-06 19:15:41 +01:00
DavePutz	ac33c3fe2c	Implementation of continuous synchronization of RTC during pulsein Flags and code to implement continuous synchronization of RTC during pulsein	2020-07-04 21:17:19 -05:00
DavePutz	94d90742dd	Implementation of RTC continuous synchronization during pulsein Flags and code to implement RTC continuous synchronization during pulsein	2020-07-04 21:15:38 -05:00
ndgarage	e514782cc6	update-with-new-usb-PID	2020-07-04 10:39:21 -06:00
ansonhe97	36ef3476de	Fix depreciate terminology	2020-07-04 11:21:58 +08:00
ansonhe97	2ecb46f192	Fix CI	2020-07-03 13:42:27 +08:00
ansonhe97	2a92cf8d8b	ADD: Added LCD driver to board init	2020-07-03 12:44:20 +08:00
ansonhe97	49aacc8596	ADD: Fixed wrong SPI pins and added more functional pins	2020-07-03 12:43:21 +08:00
Scott Shawcroft	4d7b9cde33	Merge pull request #3109 from pewpew-game/fluff_m0 Fluff M0: additional pins on version 1.3 of the board	2020-07-02 15:43:32 -07:00
Radomir Dopieralski	fce35c3481	Fluff M0: additional pins on version 1.3 of the board	2020-07-02 22:57:58 +02:00
Jeff Epler	fcddfd0f39	Merge pull request #3083 from tannewt/esp32s2_busio Add busio support for the ESP32-S2	2020-07-01 21:02:08 -05:00
ndgarage	0537f4e775	restore-ndgarage_ndbit6-to-original	2020-07-01 14:12:52 -06:00
ndgarage	c759c9a2aa	add-ndgarage_ndbit6_v2-update	2020-07-01 13:58:07 -06:00
svgops	b80dbb4b2c	add-ndgarage_ndbit6_v2	2020-07-01 12:06:59 -06:00
ansonhe97	d4e28dd233	ADD: added more special pins on Wio Terminal	2020-07-01 17:06:26 +08:00
Dan Halbert	11cb3e3b4b	hci skeleton done; not working yet	2020-06-30 23:19:40 -04:00
Scott Shawcroft	74ad5e80ce	Merge pull request #3089 from ansonhe97/main Add: added Seeed's Wio Terminal Board Support	2020-06-30 10:58:24 -07:00
ansonhe97	4613f80d7a	Fix end of line	2020-06-29 17:41:48 +08:00
ansonhe97	0dd17f4418	Add: Added Seeed Wio Terminal board support	2020-06-29 16:22:41 +08:00
Jeff Epler	c5db97c50f	atmel-sam: sdio: disable debug prints by default	2020-06-26 13:16:16 -05:00
Jeff Epler	f496c0b58d	atmel-samd: Add SDIO SD card interface	2020-06-26 11:50:42 -05:00
Jeff Epler	d4b9458512	samd: sdio: Add needed files from atmel start	2020-06-26 11:50:41 -05:00
Jeff Epler	57fde2e07b	sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.	2020-06-26 11:50:23 -05:00
Dan Halbert	3e616ccead	update submodules	2020-06-26 12:21:57 -04:00
Dan Halbert	759929c24a	hci early wip; refactor supervisor bluetooth.c for nrf: tested	2020-06-25 20:57:17 -04:00
Jeff Epler	1d2cc0b968	I2CPeripheral: Rename class and its module This is an incompatible change.	2020-06-25 11:44:19 -05:00
Jeff Epler	076a96ccc6	Merge pull request #3046 from jepler/same51 Add basic SAM E54 support and SAM E54 Xplained board	2020-06-25 06:55:27 -05:00
Scott Shawcroft	c5fa9730a8	Compiles!	2020-06-24 12:47:59 -07:00
Scott Shawcroft	a26102607e	Add UART support	2020-06-24 12:47:58 -07:00
Jeff Epler	87835c77e8	Merge pull request #3038 from jepler/compute-usb-devices Compute USB_DEVICES instead of requiring it to be specified	2020-06-24 13:31:56 -05:00
Jeff Epler	f232aef786	supervisor.mk: Compute USB_DEVICES; remove from boards and ports Since Actions passed on the previous commit, where this computed value was checked against the specified value (if any), this is no net change, except that we no longer need to specify it for particular boards or ports.	2020-06-23 12:59:01 -05:00
Jeff Epler	38659b566c	atmel-samd: Finish disabling USB MIDI and/or HID on certain boards	2020-06-23 10:56:27 -05:00
Jeff Epler	d5074220a8	atmel-samd: Add SAM E54 Xplained board Few peripherals are actually tested. However, USB, I2C and GPIO seem to work. Most pins are silkscreened with the "PX00" style, so the board module only includes the small number that are screened differently. The default SPI, I2C, and UART are the ones on the EXT2 header. This is arbitrary, but the I2C on this connector is shared with the on-board I2C devices and the PCC header, making it the most versatile.	2020-06-23 10:41:48 -05:00
Jeff Epler	da733c01da	atmel-samd: Add support for SAM E54 family MCUs This introduces the new macro SAM_D5X_E5X. This is mostly the same as SAMD51 before, except in a few places where a special case for SAME54 is required	2020-06-23 10:41:48 -05:00
Scott Shawcroft	0b99baccb8	Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board PID request for a new board configuration	2020-06-22 15:09:42 -07:00
Scott Shawcroft	54b66d9484	Merge pull request #3052 from dhalbert/samd51-voltage-check-delay delay 1ms on SAMD51 when reading processor voltage	2020-06-22 14:29:43 -07:00
Jeff Epler	d43449a6d6	sparkfun samd51 thing plus: Fix board.I2C() This had the SDA and SCL pins transposed, so nothing worked.	2020-06-22 10:45:27 -05:00
Jeff Epler	a770b5a919	never_reset_pin: Move pin validity check before first use of pin number	2020-06-22 10:45:27 -05:00
Jeff Epler	6638bc32c3	samd: Makefile: Regularize whitespace	2020-06-22 10:45:27 -05:00
Jeff Epler	a580f0f1c4	_pew: move to common-hal I noticed that this code was referring to samd-specific functionality, and isn't enabled except in one samd board (pewpew10). Move it. There is incomplte support for _pew in mimxrt10xx which then caused build errors; adding a #if guard to check for _pew being enabled fixes it. The _pew module is not likely to be important on mimxrt but I'll leave the choice to remove it to someone else.	2020-06-22 10:45:27 -05:00
Dan Halbert	1687c8b1e3	delay 1ms on SAMD51 when reading processor voltage	2020-06-19 15:25:04 -04:00
Florin Trutiu	b316549590	Added the new assigned VID/PID pair	2020-06-19 19:26:29 +03:00
Florin Trutiu	178be2e3c9	loc_ber_m4_base_board	2020-06-19 18:56:20 +03:00
Jeff Epler	3c3cad5ae6	docs: Improve 5.0.x <-> main branch doc linkrot This improves, but does not entirely fix, the broken links that result from the autoapi change. It fixes module-level links, but class links still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x) is now just /shared-bindings/displayio/#displayio.Palette).	2020-06-14 11:12:35 -05:00
Diego Elio Pettenò	dd5d7c86d2	Fix up end of file and trailing whitespace. This can be enforced by pre-commit, but correct it separately to make it easier to review.	2020-06-03 10:56:35 +01:00
Scott Shawcroft	796373b8be	A number of small ESP32S2 fixes: * Fix flash writes that don't end on a sector boundary. Fixes #2944 * Fix enum incompatibility with IDF. * Fix printf output so it goes out debug UART. * Increase stack size to 8k. * Fix sleep of less than a tick so it doesn't crash.	2020-05-28 15:43:55 -07:00
Dan Halbert	3574670226	Merge pull request #2931 from tannewt/esp32s2_digitalio Finish digitalio and pin use tracking for ESP32S2	2020-05-26 19:18:45 -04:00
Scott Shawcroft	c917270da7	Merge pull request #2956 from hathach/fix-samd-wfi fix racing issue for SAMD when executing WFI	2020-05-26 14:54:24 -07:00
Scott Shawcroft	ffe0e0edc3	Merge pull request #2938 from DavePutz/issue2894 Add an increment to tcc_refcount to allow deinit to work correctly	2020-05-26 14:39:59 -07:00
Scott Shawcroft	665fe7a839	Merge pull request #2945 from pewpew-game/fluff_m0 Add support for Fluff M0	2020-05-26 13:18:55 -07:00
Scott Shawcroft	2ffd70417d	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-26 13:09:57 -07:00
Radomir Dopieralski	4974c933b1	Fix swapped SCK and MISO in Fluff M0	2020-05-26 03:29:05 +02:00
hathach	e79340601f	fix racing issue for SAMD when executing WFI	2020-05-25 20:51:02 +07:00
Jeff Epler	5cffd7e88d	trinket_m0_haxpress: disable RTC to make build fit with upcoming translations	2020-05-23 20:48:38 -05:00
Jeff Epler	eb85304d04	escornabot: disable RTC to make build fit with upcoming translations	2020-05-23 20:48:38 -05:00
Jeff Epler	03866c0598	meowmeow: disable modules to make build fit with upcoming translations	2020-05-23 20:41:25 -05:00
Jeff Epler	2ed40075a5	pyruler: disable RTC to make build fit with upcoming translations	2020-05-23 20:36:33 -05:00
Radomir Dopieralski	4c01ddcbab	Add support for Fluff M0	2020-05-22 18:51:12 +02:00
DavePutz	2e05f628f0	Add an increment to tcc_refcount to allow deinits to work properly	2020-05-21 11:08:26 -05:00
Scott Shawcroft	3bb6a32a20	Merge branch 'master' into esp32s2_digitalio	2020-05-21 08:52:39 -07:00
jason	4f54514be4	Initial version	2020-05-20 21:11:06 -05:00
Scott Shawcroft	ba724fffb4	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-20 10:48:27 -07:00
Scott Shawcroft	fd0420d432	Update digitalio api for other ports	2020-05-20 09:23:42 -07:00
Scott Shawcroft	916ca9f8a6	Merge pull request #2910 from tannewt/esp32s2 Add initial ESP32S2 support	2020-05-19 12:53:23 -07:00
Scott Shawcroft	acf4b1bede	Remove reverse methods from per-board defs	2020-05-19 11:43:57 -07:00
Scott Shawcroft	9eb85a5feb	shrink Xinabox CS11 by turning off unused pins	2020-05-19 10:55:02 -07:00
Scott Shawcroft	2c2b53303d	Merge pull request #2837 from k0d/serial-debug Add support for a debug console, such as ST-Link VCP.	2020-05-18 18:13:31 -07:00
Mark Olsson	007c92ee6a	Enable showing the console on a debug uart	2020-05-19 02:02:52 +02:00
Scott Shawcroft	cf690bd390	Merge remote-tracking branch 'adafruit/master' into esp32s2	2020-05-18 16:46:41 -07:00
Scott Shawcroft	9811c1fe4b	Merge pull request #2896 from theacodes/add-bytearray-decode Add bytearray.decode() for CPython compatibility	2020-05-18 14:38:45 -07:00
Dan Halbert	e175a64036	disable rotaryio in CPX crickit	2020-05-15 20:35:12 -04:00
Scott Shawcroft	8edb8e87c8	Turn reverse methods off for trinket haxpress	2020-05-15 17:22:22 -07:00
Scott Shawcroft	86f865afe0	Turn reverse methods off for cpx_crickit	2020-05-15 16:42:22 -07:00
Scott Shawcroft	6aaab005c5	Initial ESP32S2 port. Basic blinky works but doesn't check pins.	2020-05-15 15:36:16 -07:00
Dan Halbert	a3ca9401b4	Shrink crickit build	2020-05-15 18:29:37 -04:00
Scott Shawcroft	0d8bca92e2	Merge pull request #2810 from dherrada/master Pyi integration	2020-05-15 10:31:05 -07:00
Scott Shawcroft	db4dbe0752	Merge pull request #2889 from jepler/gamepad-tick Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick	2020-05-13 11:53:23 -07:00
Jeff Epler	adef45403b	samd: audio dma: enable/disable supervisor tick as needed	2020-05-13 10:29:36 -05:00
Scott Shawcroft	7546d47f77	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-13 08:23:55 -07:00
Scott Shawcroft	80129c5a21	Disable countio on trinket haxpress	2020-05-12 18:55:49 -07:00
Scott Shawcroft	cde6651721	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-12 18:23:59 -07:00
Scott Shawcroft	277e8d528b	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 18:22:57 -07:00
Scott Shawcroft	4e8de3c554	Swap sphinx to autoapi and the inline stubs	2020-05-12 17:28:24 -07:00
warriorofwire	5a80f5e606	nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size	2020-05-12 15:23:00 -07:00
Scott Shawcroft	d274074f01	Merge remote-tracking branch 'adafruit/master' into vectorio	2020-05-12 12:29:05 -07:00
Scott Shawcroft	bc40034a08	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 12:12:51 -07:00
Scott Shawcroft	f7303e6bd0	Merge pull request #2754 from maholli/non-standard-nvm Add non-standard nvm to QSPI for external flash support	2020-05-12 11:56:33 -07:00
Daniel Pollard	62bdfb74e3	removed lib from catwan_usbstick - updated transalations overflowed	2020-05-12 16:40:23 +10:00
Daniel Pollard	5e5461e77e	removed countio from catwan_usbstick build	2020-05-12 16:32:35 +10:00
Daniel Pollard	ee2cb703c8	merged master	2020-05-12 14:41:28 +10:00
Scott Shawcroft	55f78bfb70	Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol ujson: work with mp stream protocol for fast & easy read	2020-05-11 15:40:27 -07:00
DavePutz	407938bf3a	Added a check for platforms supporting RTC before calling rtc_reset() Added an #if CIRCUITPY_RTC check for platforms supporting RTC	2020-05-11 12:03:44 -05:00
DavePutz	2ddfab315c	Added call to rtc_reset() in rtc_init() Fix for issue #2872. The rtc_time_source had not been initialized; causing a time.time() call to fail.	2020-05-11 11:31:18 -05:00
warriorofwire	eb3d5fa453	ujson: do not eat trailing whitespace Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers. When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout. Fixes: - Waiting for a timeout after you have completed reading a correct and complete JSON off the input. - Raising an OSError after reading a correct and complete JSON off the input. - Eating more data than semantically owned off the input buffer. - Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object. Code you would write before: ``` line = board_busio_uart_port.read_line() json_dict = json.loads(line) ``` or reaching for fixed buffers and swapping them around in Python. Code that did not work before that does now: ``` json_dict = json.load(board_busio_uart_port) ``` - This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs. - It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA. - It simplifies code that users write while improving their apps.	2020-05-10 20:45:42 -07:00
warriorofwire	206d0e598a	Add vectorio: for drawing shapes vectorio builds on m4 express feather Concrete shapes are composed into a VectorShape which is put into a displayio Group for display. VectorShape provides transpose and x/y positioning for shape implementations. Included Shapes: * Circle - A radius; Circle is positioned at its axis in the VectorShape. - You can freely modify the radius to grow and shrink the circle in-place. * Polygon - An ordered list of points. - Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last point and the first point. - You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape x and y properties will position the rectangle relative to its top center point * Rectangle A width and a height.	2020-05-09 15:38:22 -07:00
Dan Halbert	8d00d99ca0	Shrink hallowing_m0_express to fit ko build	2020-05-08 22:51:21 -04:00
Daniel Pollard	7f1be814c8	changed build variables as per advice	2020-05-06 09:04:15 +10:00
Daniel Pollard	f63ee9fb9b	excluded countio from other smaller boards	2020-05-05 16:15:57 +10:00
Daniel Pollard	d5c24b99b8	hallowing m0 - exclude countio	2020-05-05 16:04:28 +10:00
Daniel Pollard	bfa5cd9c13	refactor countio based on feedback	2020-05-05 15:23:38 +10:00
Dan Halbert	602eabe668	Squeeze hallowing_m0_express build slightly ko build is a little too big.	2020-05-04 17:18:53 -04:00
Dan Halbert	c377d4bea7	Merge branch 'master' into non-standard-nvm	2020-05-04 16:08:45 -04:00
Scott Shawcroft	3799c34564	Disable bitbangio on CPX Crickit so we have room for lower_power. Enable pixelbuf in its place because we'll need it soon.	2020-04-29 13:57:09 -07:00
Max Holliday	b2de5a9df9	fixing my goofy gcc-arm local stuff	2020-04-28 12:24:10 -07:00
Max Holliday	6c4decd4e2	decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE	2020-04-28 11:51:07 -07:00
Scott Shawcroft	755d404edf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-27 16:45:10 -07:00
Max Holliday	86943ca8a1	Merge remote-tracking branch 'adafruit/master'	2020-04-27 13:51:51 -07:00
Scott Shawcroft	9e4b94f466	Merge pull request #2805 from tannewt/update_tinyusb Update tinyusb	2020-04-26 20:55:36 -07:00
Lucian Copeland	bd0df9e3bc	Minor redundancy fix	2020-04-23 17:43:35 -04:00
Lucian Copeland	c6c77726e7	Merge remote-tracking branch 'upstream/master' into stm32-docfix	2020-04-23 13:39:48 -04:00
Lucian Copeland	8791ca6af3	implement requested changes	2020-04-23 13:33:41 -04:00
Scott Shawcroft	dcb0e50f04	Fix USB midi and hid disable.	2020-04-21 14:15:44 -07:00
Scott Shawcroft	bebf27e733	Merge remote-tracking branch 'adafruit/master' into lower_power This isn't perfect and needs a bit more testing.	2020-04-20 18:25:13 -07:00
Scott Shawcroft	a4d86b96fd	Merge pull request #2777 from pewpew-game/master Fix RGB/BGR colors in Stage	2020-04-20 15:25:29 -07:00
Jeff Epler	5fcc6d6286	RGBMatrix: finish renaming from Protomatter This gets all the purely internal references. Some uses of protomatter/Protomatter/PROTOMATTER remain, as they are references to symbols in the Protomatter C library itself.	2020-04-17 18:44:07 -05:00
Jeff Epler	3d6258f63d	Rename Protomatter -> RGBMatrix This is a quick rename, it changes the user-facing names but not the internal names of things.	2020-04-17 18:43:57 -05:00
Jeff Epler	a32337718d	Rename _protomatter -> protomatter I originally believed that there would be a wrapper library around it, like with _pixelbuf; but this proves not to be the case, as there's too little for the library to do.	2020-04-17 18:43:57 -05:00
Scott Shawcroft	7e3d4c61b5	Update TinyUSB and add interrupt hooks.	2020-04-17 14:16:49 -07:00
Radomir Dopieralski	43022d8294	Add copyrights to pewpew m4 and ugame board.c	2020-04-17 09:50:11 +02:00
Scott Shawcroft	b3552efc76	Remove accidental file	2020-04-16 11:28:01 -07:00
Radomir Dopieralski	f39ca6052e	Fix RGB/BGR colors in Stage This makes the colors used by the stage library compatible with those used by the displayio library.	2020-04-15 23:41:38 +02:00
Scott Shawcroft	b580b34cbf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-14 17:14:44 -07:00
Jeff Epler	23bced26da	samd: actually disable protomatter timer Just setting the timer handler to NO_INTERRUPT doesn't stop the interrupt from occurring.	2020-04-14 18:24:58 -05:00
Jeff Epler	759fdffda5	Update ports/atmel-samd/boards/pyportal_titano/board.c Co-Authored-By: Scott Shawcroft <scott@tannewt.org>	2020-04-14 18:24:58 -05:00
Jeff Epler	09dc46a984	Add Protomatter and FramebufferDisplay	2020-04-14 18:24:54 -05:00
Jeff Epler	a51d4f7a45	pycubed: add trailing newline to file POSIX specifies that text files end in a trailing newline	2020-04-14 18:24:54 -05:00
Sabas	cac4fb0318	Merge branch 'master' into nfc_copy	2020-04-09 17:05:11 -05:00
sabas1080	49771b4d7f	Update to v1.3	2020-04-09 14:27:51 -05:00
Scott Shawcroft	d0a25ca9ac	Tweaks based on dhalberts feedback	2020-04-08 10:49:46 -07:00
Max Holliday	181ecf4a9b	fixing my goofy CROSS_COMPILE fix	2020-04-07 21:54:46 -07:00
Max Holliday	a53a26be70	missed a debug flag	2020-04-07 18:24:53 -07:00
Max Holliday	826837186c	adds standard (non-queued) SPI support to QSPI for external flash	2020-04-07 18:17:25 -07:00
Scott Shawcroft	c0ba2a839f	Updates based on feedback from jepler	2020-04-06 16:03:31 -07:00
Scott Shawcroft	e99cf6e441	Rework sleep timing It didn't account for background task time and could end up sleeping for way longer than it should because the RTC compare time had already passed.	2020-04-03 18:07:56 -07:00
Scott Shawcroft	46af4bdd0e	Fix SAMD21 PulseIn	2020-04-02 17:35:52 -07:00
Scott Shawcroft	77562a2acd	Update the supported ports	2020-03-31 18:27:55 -07:00
Scott Shawcroft	8fe512c7e9	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-03-31 15:13:58 -07:00
Brian Dean	7cfa8e1a68	board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.	2020-03-29 18:59:00 -04:00
Jeff Epler	54e8c63b4f	Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity Add polarity and phase to FourWire.	2020-03-28 07:28:37 -05:00
Scott Shawcroft	798118b74f	Update board.c's to remove remaining tick.h	2020-03-27 14:52:35 -07:00
Scott Shawcroft	e4c4a4a3de	Swap to committed dependencies	2020-03-27 14:39:59 -07:00
Scott Shawcroft	b043384949	Update built in display init	2020-03-27 14:35:29 -07:00
Brian Dean	7fa38e8725	Update board name to bdmicro_vina_m0 to eliminate hyphens.	2020-03-27 13:37:59 -04:00
Brian Dean	14a1e5756e	Merge branch 'master' of https://github.com/adafruit/circuitpython	2020-03-26 20:28:54 -04:00
Brian Dean	2ae9edcbff	Add new board BDMICRO 'Vina M0'. ports/atmel-samd/boards/bdmicro_vina_m0/board.c ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk ports/atmel-samd/boards/bdmicro_vina_m0/board.c This board includes the newly added MX25L51245G 64MB SPI flash chip for the CircuitPython file system. Also included is the PCF2129T/2,518 high accuracy, battery backed, RTC. Also includes an independent USB HOST connector in addition to USB DEVICE making it easy to connect USB peripherals. Designed mainly as a general purpose module to piggy back onto application-specific boards, it can also run low power standalone in harsh environments for data logging and other control applications using an appropriate enclosure. Has been extensively tested with CircuitPython and works well.	2020-03-26 20:15:54 -04:00
Scott Shawcroft	aec3b2419b	Merge pull request #2733 from oshwabadge2020/change_backlight Add backlight polarity flag to Display	2020-03-26 14:00:47 -07:00
Thea Flowers	ff67571e9a	Add GD25Q64C as a flash chip for Sol	2020-03-26 12:33:27 -07:00
siddacious	9e0c00dfd4	adding a backlight polarity flag to Display	2020-03-25 22:51:20 -07:00
Chris Burton	5e559be9b5	Remove Adafruit_CircuitPython_CircuitPlayground	2020-03-24 21:10:34 +00:00
Chris Burton	39a19d54c2	Add support for Commander	2020-03-22 16:23:56 +00:00
Scott Shawcroft	5dc3a8960b	Merge pull request #2719 from theacodes/add-honking-button Add board support for Winterbloom Big Honking Button	2020-03-18 17:37:59 -07:00
Thea Flowers	e027aaf433	Remove some build options, fix order of boards in build.yml	2020-03-18 16:49:10 -07:00
Thea Flowers	7332adfa21	Add board support for Winterbloom Big Honking Button	2020-03-18 16:29:44 -07:00
Scott Shawcroft	4603c6ddd7	Merge pull request #2711 from jepler/update-ulab update ulab	2020-03-17 15:33:08 -07:00
Scott Shawcroft	6db11cf68b	Fix up Spresense build. It doesn't sleep.	2020-03-17 14:21:45 -07:00
Scott Shawcroft	d9e68156b2	fix up SAMD21 sleep	2020-03-17 12:10:35 -07:00
Jeff Epler	d6342af980	ulab: rename enable macro so it appears in the support matrix	2020-03-17 09:33:03 -05:00
Scott Shawcroft	76ca13b6ed	Fix SAMD51 pulsein	2020-03-13 17:21:15 -07:00
Scott Shawcroft	7100d5e485	Fix autoreload and ticks in general	2020-03-13 16:13:24 -07:00
Scott Shawcroft	df5be65423	Update FrequencyIn for new clock API.	2020-03-13 16:12:52 -07:00
Szymon Klause	c9aa50817c	add UARTLogger2 board support for CircuitPython	2020-03-13 21:39:17 +01:00
Scott Shawcroft	4fba4eb133	Switch from 1k RTC input to 32k output	2020-03-13 11:16:41 -07:00
Scott Shawcroft	48b5f2a384	Initial work on SAMD	2020-03-13 11:16:41 -07:00
Dan Halbert	6363b5ad06	Merge pull request #2693 from jepler/ulab-enable ulab: enable on most builds	2020-03-10 09:48:46 -04:00
Jeff Epler	03a2b2faf1	ulab: don't enable on m0 boards	2020-03-09 23:00:21 -05:00
Dan Halbert	210c3274e5	Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup	2020-03-05 17:47:01 -05:00
Thea Flowers	409a4a9490	Disable the HID USB descriptor for Sol It's not used and ends up being confusing for folks.	2020-03-04 23:22:46 -08:00
Dan Halbert	8435935429	update uses of assert_pin_free; remove redundant checks	2020-02-29 15:37:32 -05:00
Dan Halbert	b6206406de	new pin validation routines; don't use mp_const_none if NULL will do	2020-02-28 23:43:04 -05:00
Jeff Epler	fa3b9eba92	ulab: Incorporate it	2020-02-27 11:03:03 -06:00
jepler	f20255813f	samd51 thing plus: new port testing performed: * successfully store and retrieve a 500kB file on the flash * square wave output on each pin appears on o'scope * board.SPI(), board.SERIAL(), board.I2C() all construct	2020-02-25 11:52:23 -06:00
Dan Halbert	dcc8abf74e	Merge pull request #2638 from fgallaire/master Arduino Nano 33 IoT support	2020-02-22 00:12:06 -05:00
Florent Gallaire	96db16a7a2	Last NINA pins	2020-02-22 04:30:18 +01:00
Florent Gallaire	39ec5d0e51	Add NINA pins	2020-02-21 01:34:52 +01:00
Scott Shawcroft	4552aff125	Merge pull request #2629 from mubes/rtsctsrs485 Addition of RTS/CTS/RS485 capability	2020-02-19 10:35:57 -08:00
Florent Gallaire	fba0b302ff	Add Arduino Nano 33 IoT support	2020-02-19 08:56:06 +01:00
Florent Gallaire	63bcd52a5a	Add Arduino Nano 33 IoT documentation	2020-02-19 08:50:27 +01:00
Dan Halbert	1f148242db	Merge pull request #2605 from maholli/master New board: PyCubed + updates to SAM32 board	2020-02-18 22:01:41 -05:00
Dave Marples	24405cabaf	Edits as a result of review	2020-02-19 00:07:01 +00:00
Dave Marples	490a808bf6	Addition of stubs for rs485/CTS/RTS handling on non-implemented chips	2020-02-18 23:16:40 +00:00
Max Holliday	2b79d8ffe9	adding PWM to board.c for external WDT	2020-02-18 14:16:54 -08:00
Max Holliday	93760042fa	no current need for NVM	2020-02-16 11:43:19 -08:00
Dan Halbert	dc97b0d844	correct chec^Cfor flash erase boundaries	2020-02-13 17:41:05 -05:00
Scott Shawcroft	e97b0cfc61	Merge pull request #2581 from jamesbowman/master First draft of eveL, the low-level module of the Gameduino bindings	2020-02-13 11:21:32 -08:00
Max Holliday	b91c4e66cb	adding Adafruit_CircuitPython_Register to frozen + updating SAM32	2020-02-08 16:09:47 -08:00
Max Holliday	84fa0c187e	adding new board - PyCubed open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples	2020-02-08 15:33:25 -08:00
Scott Shawcroft	51004f8336	Merge pull request #2601 from dhalbert/monotonic_ns-improvement Monotonic ns improvement; time.sleep rounds to nearest msec	2020-02-07 11:03:37 -08:00
Limor "Ladyada" Fried	71672fd244	Merge pull request #2599 from ladyada/master update rotation so 0 is the default, for much faster ondiskbitmaps	2020-02-07 12:59:30 -05:00
Dan Halbert	005c4caf8c	fix function defs for compiler	2020-02-07 10:32:37 -05:00
Dan Halbert	857d8ab40a	improve time.monotonic_ns() accuracy from ms to us	2020-02-07 10:02:50 -05:00
Lady Ada	789e311b63	update rotation so 0 is the default, for much faster ondiskbitmaps	2020-02-06 16:28:02 -05:00
neubauek	d93d491a61	Cleaned up CircuitBrains Basic and Deluxe board definitions	2020-02-06 14:47:22 -06:00
James Bowman	acef93a253	Rename eveL to _eve, EVEL to _EVE	2020-02-05 18:17:58 -08:00
neubauek	f3188669e4	Added CircuitBrains Basic and Deluxe Boards	2020-02-05 14:52:47 -06:00
Dan Halbert	a4ebd2f7c1	allow tuple or list for Palette color	2020-02-03 22:09:53 -05:00
James Bowman	7fd30e7d20	First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. [adafruit/circuitpython#2578]	2020-02-03 16:46:14 -08:00
Dan Halbert	be4e681d07	fix UICR check; do not use NULL for no MISO	2020-01-31 18:57:41 -05:00
Dan Halbert	3b95d7c16a	add gamepad to specialty cpx builds; update frozen libs	2020-01-30 21:00:47 -05:00
Scott Shawcroft	55eb1730b8	Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf	2020-01-30 10:59:21 -08:00
Scott Shawcroft	5d24ade5c9	Tweak error messages to reduce code size.	2020-01-29 17:32:07 -08:00
hierophect	898f4e1f72	Merge branch 'master' into stm32-meowbit	2020-01-29 16:32:08 -05:00
Lucian Copeland	100409961a	Move board_init to main.c	2020-01-29 16:29:43 -05:00
Scott Shawcroft	eb0ef3726f	Merge pull request #2552 from jepler/samd-stereo-single-dma samd: When possible, use one DMA channel for stereo AudioOut	2020-01-27 14:15:26 -08:00
Scott Shawcroft	b36b2493bc	Merge pull request #2532 from tannewt/teensy4-dev Refine iMX RT memory layout and add three boards	2020-01-27 14:11:08 -08:00
Jeff Epler	c8f969feb5	samd: audio-dma: avoid memory allocations With the previous change, stereo mp3 playback changed from needing 4 2304-byte allocations to needing 2 4604-byte allocations. This was enough to cause MemoryErrors with regularity. By using m_realloc() here, the existing memory region can be used. m_realloc() also works on the first invocation, because m_realloc(NULL, sz) just calls m_malloc of sz.	2020-01-27 08:49:41 -06:00
Jeff Epler	cb6193bbc7	samd: When possible, use one DMA channel for stereo AudioOut .. the documentation doesn't make this clear, but in practice it works to write both of the DATABUF registers at the same time. This should also reduce the amount of wear and tear DMA puts on the system, as the number of transfers is cut in half. (the number of bytes transferred remains the same, though) In principle, this could cover all stereo cases if audio_dma_convert_signed also learned to 16-bit extend and swap values. However, this is the case that matters for stereo mp3 playback on PyGamer. Testing performed: Listened to some tracks with good stereo separation.	2020-01-26 15:36:24 -06:00
Dan Halbert	6f13979c9b	pygamer and pybadge boards were not resetting neopixels	2020-01-24 09:32:28 -05:00
Dan Halbert	68f9aee992	reset NeoPixels on CPB on soft reload	2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried	fe70072d68	Merge branch 'master' into ndbit6	2020-01-23 12:32:19 -05:00
ndgarage	4675783545	change-name-to-ndgarage_ndbit6	2020-01-23 09:55:17 -07:00
Sabas	41a85b71fc	init nfc copy	2020-01-22 20:30:33 -06:00
Dan Halbert	4923caf85e	Increase CPX stack size by 256	2020-01-21 18:53:55 -05:00
Chris Osterwood	97420994e8	Merge remote-tracking branch 'origin/master' into capablerobot-usbhub	2020-01-20 13:11:57 -05:00
Scott Shawcroft	1c39606345	Fix other builds missing new heap bounds functions	2020-01-18 18:06:56 -08:00
Scott Shawcroft	8b61333937	Merge pull request #2510 from dhalbert/bonding-nvm nrf: Add bonding to BLE pairing support	2020-01-15 16:11:09 -08:00
Dan Halbert	f496b6cdc8	Merge pull request #2520 from joeycastillo/openbook-squashed CircuitPython support for the Open Book	2020-01-15 17:21:19 -05:00
dalegrover	d6e657b593	Initial commit.	2020-01-14 16:51:27 -05:00
Joey Castillo	eb481c9247	add support for the Open Book	2020-01-14 16:34:46 -05:00
scs217	50e718be99	second revision to line breaks for visibility per dhalbert	2020-01-13 22:13:39 -05:00
scs217	18957786f2	inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert	2020-01-13 22:00:42 -05:00
scs217	c735289ddf	Added Dxx names to analog pins on Feather M4 Express pins.c file	2020-01-13 21:19:17 -05:00
Dan Halbert	2a75196aa3	merge from adafruit/circuitpython	2020-01-13 18:15:32 -05:00
Dan Halbert	189f2d5f07	Make requiring I2C pullups be optional	2020-01-09 17:31:50 -05:00
Scott Shawcroft	a10cd8580c	Merge pull request #2445 from jepler/mp3-jeplayer-fixes Fixes for JEplayer	2020-01-08 12:50:13 -08:00
Scott Shawcroft	866ac13405	Merge pull request #2450 from Marius-450/marius-display-limit-2 CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk	2020-01-07 12:08:59 -08:00
Radomir Dopieralski	59ded1131f	Take display offsets for PewPew M4 from the bootloader config The PewPew M4 devices come with different displays, which require different offsets. Since the information about offsets is saved in the bootloader, we can take it from there.	2020-01-06 14:24:30 +01:00
Marius-450	3ad3d49959	changes only for monster m4sk	2020-01-04 12:32:49 -05:00
Dan Halbert	242d572470	wip	2020-01-03 10:24:07 -05:00
Jeff Epler	bd8650d35b	samd/peripherals: take upstream update	2020-01-02 17:55:50 -06:00
Dan Halbert	32b82032a1	Merge pull request #2423 from pewpew-game/pewpew-m4-update Update the PewPew M4 board and circuitpython-stage	2020-01-01 13:59:02 -05:00
Scott Shawcroft	0223589e6c	Fix default UART too	2019-12-30 11:34:51 -08:00
Scott Shawcroft	e1d026f815	Update pins.c	2019-12-30 11:33:04 -08:00
hathach	62c4028cde	sync with https://github.com/hathach/tinyusb/pull/246 should fix slow enumeration	2019-12-26 23:04:16 +07:00
Jeff Epler	5aa3e3eabb	samd/peripherals: update	2019-12-24 09:36:19 -06:00
Radomir Dopieralski	b06057395b	Update PewPew M4 PewPew M4 now has the pew.py added to its frozen libraries. Some features needed to be disabled to make room for that.	2019-12-23 18:37:36 +01:00
Scott Shawcroft	f60b6481e0	Turn off `gamepad` on cpx crickit	2019-12-20 12:14:27 -08:00
Scott Shawcroft	b859e2b710	Remove `re` from CPX Displayio build to make space.	2019-12-20 11:43:56 -08:00
Jeff Epler	d31a387ace	circuitplayground_express_displayio: reduce inlining to make .ko translation fit	2019-12-19 16:11:29 -06:00
ndgarage	16688180c6	add-ndbit6	2019-12-19 07:17:43 -07:00
Dan Halbert	81581b345c	Increase CPX stack size slightly	2019-12-16 17:25:22 -05:00
KalbeAbbas	89ed64157d	Merge branch 'master' into master	2019-12-16 13:25:44 +05:00
KalbeAbbas	87dc9bee8b	Update mpconfigboard.mk	2019-12-16 12:25:51 +05:00
KalbeAbbas	6f6d6c01ab	Update mpconfigboard.mk	2019-12-16 12:18:16 +05:00
Dan Halbert	e11fabd5e0	moved nrf internal filesystem to just below bootloader	2019-12-12 14:57:23 -05:00
Dan Halbert	ae64a669dd	address review comments	2019-12-11 15:43:06 -05:00
Dan Halbert	d9ca4c9a60	fix build failures	2019-12-10 22:39:44 -05:00
Dan Halbert	c6221c5956	Remove no-longer-used nrf and atmel-samd .ld files	2019-12-10 21:22:17 -05:00
Dan Halbert	68ae47907c	merge from upstream	2019-12-10 21:04:46 -05:00
Dan Halbert	013c840862	working on all ports	2019-12-10 20:27:30 -05:00
Jeff Epler	a08d9e6d8e	audiocore: Add MP3File using Adafruit_MP3 library	2019-12-10 14:03:06 -06:00
Jeff Epler	1905d0746d	samd: neopixel: Fix neopixels after #2297 This adapts the "inline assembler" code from the UF2 bootloader, which in turn is said to be adapted from the arduino neopixel library. This requires the cache remain ON when using M0, and be turned OFF on M4 (determined by trial and error) Testing performed on a Metro M4: * measured timings using o'scope and found all values within datasheet tolerance. * Drove a string of 96 neopixels without visible glitches * on-board neopixel worked Testing performed on a Circuit Playground Express (M0): * Color wheel code works on built-in neopixels * Color wheel code works on 96 neopixel strip As a bonus, this may have freed up a bit of flash on M0 targets. (2988 -> 3068 bytes free on Trinket M0) Closes: #2297	2019-12-07 19:19:45 -06:00
Dan Halbert	d628d2a261	atmel-samd working	2019-12-06 15:18:20 -05:00
Dan Halbert	40434d6919	wip	2019-12-05 22:45:53 -05:00
Scott Shawcroft	fce81e6868	Merge pull request #2297 from jepler/tick-refactor Call background tasks only once per ms	2019-12-02 16:45:51 -08:00
Jeff Epler	002f5c0f1c	samd: trinket_m0: make board fit again	2019-12-02 08:25:48 -06:00
Jeff Epler	899202aca7	Merge branch 'master' into gcc9	2019-12-02 07:27:03 -06:00
Jeff Epler	95d9c49e43	Merge remote-tracking branch 'origin/master' into tick-refactor	2019-11-29 11:27:09 -06:00
Jeff Epler	d843156a5e	samd: Consolidate small build optimization flags .. inline-unit-growth was the same across all boards, and the highest max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's worth a little work to follow the DRY principle	2019-11-29 10:51:16 -06:00
Dan Halbert	dd6dfeb30a	Squeeze pyruler zh_Latn_pinyin	2019-11-27 14:47:35 -05:00
Dan Halbert	b32a9192df	make UART.write be blocking on SAMD; add timeout property	2019-11-27 13:05:29 -05:00
Dan Halbert	e560b419f8	Merge pull request #2325 from sarfata/sarfata/add-shirtty-master Add shIRtty board	2019-11-26 15:23:56 -05:00
Dan Halbert	97d90c6039	Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name Set USB_INTERFACE_NAME for winterbloom_sol	2019-11-26 15:17:14 -05:00
Thea Flowers	e77046d49b	Set USB_INTERFACE_NAME for winterbloom_sol	2019-11-26 10:59:12 -08:00
Thomas Sarlandie	2647ea0754	fix: disable touchio to save some space	2019-11-26 19:26:18 +01:00
Scott Shawcroft	58ad38a88e	Remove DotStar from pIRkey M0 for now to free up space Once we use PixelBuf, the library will be much smaller.	2019-11-26 09:31:44 -08:00
Jeff Epler	82f55dc046	atmel-samd: reduce inlining on constrained boards again pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0 now has just 76 bytes flash available.	2019-11-26 08:50:55 -06:00
Jeff Epler	3ed6de7baf	atmel-samd: reduce inlining on pyruler again By tweaking the optimizer flags further, this build also fits	2019-11-26 08:50:55 -06:00
Jeff Epler	2e4a6b94e7	atmel-samd: get most constrained m0 builds to work again By tweaking the optimizer flags, we can get back a few hundred bytes and allow these builds to work with the gcc9 compiler.	2019-11-26 08:50:45 -06:00
Thomas Sarlandie	11dc572bce	feature: our own PID - thanks @ladyada	2019-11-25 21:56:42 +01:00
Thomas Sarlandie	fc71ed9789	add shirtty board - hackaday supercon 2019 addon	2019-11-25 17:44:41 +01:00
Dan Halbert	1ccb7b4c5e	cosmetic commit, mostly to re-run	2019-11-22 16:30:10 -05:00
Dan Halbert	13375d16f1	change mpconfigport.mk files so they can be overriden by mpconfigboard.mk	2019-11-22 15:44:51 -05:00
Jeff Epler	77b78d7fb9	Merge remote-tracking branch 'origin/master' into tick-refactor	2019-11-22 14:28:51 -06:00
Dan Halbert	e18d3e0f76	Merge branch 'master' into m4-network-ps2io	2019-11-22 15:02:52 -05:00
Dan Halbert	1a62a9cb17	remove network from kicksat_sprite	2019-11-22 14:02:44 -05:00
Dan Halbert	2e9aa38700	turn off network in pewpew_m4	2019-11-22 13:49:33 -05:00
Dan Halbert	1d411d2874	Merge remote-tracking branch 'adafruit/master' into testing-fixes	2019-11-22 11:55:34 -05:00
Dan Halbert	228a619af5	enable network, wiznet5k, and ps2io by default on M4	2019-11-22 10:59:27 -05:00
wallarug	fce7b89087	removed Robo HAT MM1 M0 board.	2019-11-20 21:34:24 +11:00
ndgarage	b3d7467719	add-ndbit6	2019-11-19 14:52:09 -07:00
Jeff Epler	40a47d41df	samd: background: Allow monitoring time taken in background task If you define MONITOR_BACKGROUND_TASK, then a physical output pin (Metro M4 Express's "SCL" pin by default) will be set HIGH while in the background task and LOW at other times	2019-11-18 11:01:24 -06:00
Jeff Epler	7f744a2369	Supervisor: move most of systick to the supervisor This code is shared by most parts, except where not all the #ifdefs inside the tick function were present in all ports. This mostly would have broken gamepad tick support on non-samd ports. The "ms32" and "ms64" variants of the tick functions are introduced because there is no 64-bit atomic read. Disabling interrupts avoids a low probability bug where milliseconds could be off by ~49.5 days once every ~49.5 days (2^32 ms). Avoiding disabling interrupts when only the low 32 bits are needed is a minor optimization. Testing performed: on metro m4 express, USB still works and time.monotonic_ns() still counts up	2019-11-18 11:01:23 -06:00
Cedar Grove Maker Studios	e7df288a34	add USB interface description ... to "StringCarM0Ex"	2019-11-16 16:40:40 -08:00
Hierophect	81223c76bd	revert error	2019-11-15 13:04:25 -05:00
Hierophect	2c6781f74d	move neopixel_in_use flag to shared-bindings	2019-11-15 12:59:52 -05:00
Hierophect	de5691acf5	Add never_reset and reset to pin common hal, adjust files	2019-11-15 12:47:00 -05:00
KalbeAbbas	8134ceec83	Update pins.c	2019-11-14 23:16:55 +05:00
KalbeAbbas	799770926b	Update pins.c	2019-11-14 18:51:01 +05:00
KalbeAbbas	949f87fd25	Update pins.c	2019-11-14 18:50:26 +05:00
KalbeAbbas	3db7f2798f	updated	2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen	d745c1023e	Support for XinaBox CC03 and CS11 CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. https://xinabox.cc/products/cc03 https://xinabox.cc/products/cs11	2019-11-12 12:48:31 +02:00
Thea Flowers	c7195c4bc5	Allow boards to enable the `micropython.native` decorator Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables the `micropython.native` decorator.	2019-11-05 14:27:53 -08:00
Thea Flowers	73989dbcaf	Add board configuration for Winterbloom Sol	2019-11-04 23:11:42 -08:00
Scott Shawcroft	cd3fcc87ab	Merge pull request #2252 from dhalbert/cpb-two-i2c nrf: allocate two I2C on CPB	2019-11-03 13:15:36 -08:00
Dan Halbert	85a648224f	Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices	2019-11-02 22:47:03 -04:00
brentru	2f04c5891f	flip it around	2019-10-31 14:11:50 -04:00
brentru	ab3da3071c	flip MADCTL BGR bit to reflect RGB colors	2019-10-31 10:11:47 -04:00
ladyada	d2b613134d	we should use native rotation, and tweak madctl (not done yet)	2019-10-29 22:53:44 -04:00
ladyada	1e869d1334	switch to 8-bit mode - tested on hardware!	2019-10-29 21:14:45 -04:00
Dan Halbert	1505da784f	wip	2019-10-28 18:15:02 -04:00
Dan Halbert	56ac41fabf	Merge pull request #2240 from theacodes/fix-2086 Track unadjusted PWM duty cycle to avoid accumulating conversion errors	2019-10-28 14:50:01 -04:00
Thea Flowers	4b742f88d9	Fix spelling	2019-10-25 10:50:27 -07:00
Thea Flowers	4fdf518251	Track unadjusted PWM duty cycle to avoid accumulating conversion errors Fixes #2086 When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as well, since the registers have to be re-calculated based on the new frequency. Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle` will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified without the calling code also re-setting the duty cycle then the duty cycle will decay over time. This fixes that problem by tracking the unadjusted duty cycle and re-setting the duty cycle to that value when the frequency is changed.	2019-10-23 14:34:14 -07:00
ProductDev	4cd5571203	Adds builds for sparkfun_qwiic_micro with and without flash	2019-10-23 15:05:46 -06:00
Dan Halbert	7b79ac3739	Parameterize linker script	2019-10-20 23:50:12 -04:00
Kamil Tomaszewski	96756b3945	Add functions to get top and limit stack	2019-10-18 11:04:45 +02:00
wallarug	8f2e5990db	Changed to follow standard that Pad 0 is always TX	2019-10-17 18:02:05 +11:00
Scott Shawcroft	63790f01f8	Merge pull request #2218 from CedarGroveStudios/master Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip	2019-10-15 09:46:39 -07:00
Cedar Grove Maker Studios	bd608e0807	remove placeholder	2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios	b04a218bbc	initial load of stringcar m0 express defs	2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios	44ebc4c95d	establish stringcar m0 express definitions	2019-10-14 11:55:22 -07:00
Dan Halbert	c1ab2486f9	return chip vcc value	2019-10-12 15:42:15 -04:00
Chris Osterwood	137a4f8a5d	Added new flash SKU for production hardware	2019-10-07 14:50:39 -04:00
Kamil Tomaszewski	7aefcc449a	Add an alternative way to number the USB endpoints Two options available: - relative numbering (USB_RELATIVE_EP_NUM = 1) - default - absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!	2019-10-07 12:31:42 +02:00
Scott Shawcroft	cdc116291b	Merge pull request #2177 from wallarug/walla/robohatmm1-production Robo HAT MM1 - Fixes after testing	2019-09-26 10:44:55 -07:00
arturo182	21f8c3e40a	serpente: Update PID and enable as many modules as we can fit	2019-09-26 17:22:18 +02:00
wallarug	3c99a23adb	fix spi	2019-09-26 21:47:36 +10:00
wallarug	533a5bc7a3	fixed SPI on M4	2019-09-26 21:43:52 +10:00
wallarug	5cd10b3ba0	updated robohatmm1_m0	2019-09-26 20:02:09 +10:00
wallarug	39265fccf3	included a version number	2019-09-26 19:22:51 +10:00
wallarug	db9495b04b	updated board name	2019-09-26 19:21:53 +10:00
wallarug	08b0f80879	updated board name	2019-09-26 19:21:24 +10:00
wallarug	b7e8a031d0	remove frozen busio library	2019-09-26 19:19:54 +10:00
wallarug	ff13b6f682	updated pins.c	2019-09-26 19:18:50 +10:00
wallarug	70860e1352	robohatmm1 removed uart and put in correct order	2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams	9a74bf929b	Added TFT pins to HalloWing M4 for code compatibility	2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams	b7598f7058	Merge branch 'master' of https://github.com/adafruit/circuitpython	2019-09-19 14:20:28 -07:00
Scott Shawcroft	0fed65e7d2	Merge remote-tracking branch 'adafruit/master' into dac51	2019-09-19 12:21:54 -07:00
Melissa LeBlanc-Williams	341428b4da	Added SPEAKER pin to HalloWing M4 for code compatibility	2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams	8dfb2237d9	Added TOUCH pins to HalloWing M4 for code compatibility	2019-09-19 10:40:13 -07:00
Scott Shawcroft	fc90c942f5	Add custom CPX build for display support	2019-09-17 10:40:07 -07:00
jepler	dffedd7c86	samd: peripherals: update submodule reference	2019-09-16 21:48:31 -05:00
Scott Shawcroft	aa9b57fc81	Merge pull request #2154 from arturo182/master Add support for Serpente boards	2019-09-16 09:20:17 -07:00
arturo182	e1679acaec	Set as small build regardless of language	2019-09-16 11:51:46 +02:00
jepler	61698eb5d8	AnalogOut / AudioOut: Copy settings from Arduino Make changes in asf4_conf even though I think in these cases the "peripherals" submodule is running the show. Arduino clocks the DAC at 12MHz but uses the CCTRL setting for clocking < 1.2MHz (100kSPS). A fresh clock (6) is allocated for the new 12MHz clock. This matches the Arduino value, though not the GCLK index. Modify other settings to more closely resemble Arduino. In AudioOut, actually clock the waveform data from the timer we set up for this purpose. This gives good waveforms when setting AnalogOut full-scale in a loop, but the rise/fall of waveforms that come from AudioOut are still erratic. Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000) then the erratic Note that this will require https://github.com/adafruit/samd-peripherals/pull/26 to be accepted for the submodule update here to work.	2019-09-15 11:30:49 -05:00
Kattni Rembor	c94310411b	Update board def, enable touchio	2019-09-14 21:19:35 -04:00
arturo182	28bb901d1e	Add support for Serpente boards	2019-09-14 16:06:28 +02:00
Dan Halbert	b8200d7295	fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use	2019-09-09 23:17:52 -04:00
Scott Shawcroft	8066810abb	Merge pull request #2091 from jepler/samd-dma-tracking Samd dma tracking	2019-09-05 11:27:59 -07:00
Scott Shawcroft	c5caacafdd	Merge pull request #2100 from pewpew-game/pewpew_m4 Add support for PewPew M4 board	2019-09-05 11:26:47 -07:00
Radomir Dopieralski	d50ed3b6e7	Add support for PewPew M4 board	2019-09-05 10:50:33 +02:00
Dan Halbert	f3af2a6fb7	Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac	2019-09-04 21:56:13 -04:00
Dan Halbert	195de97c67	use only one endpoint pair for MSC except on SAMD21	2019-09-04 21:45:16 -04:00
Dan Halbert	fca440fb66	Merge pull request #2113 from tannewt/displayio_hidden Add .hidden to TileGrid and Group	2019-09-04 15:48:00 -04:00
Scott Shawcroft	7951646b9a	Disable bitbangio on uGame10	2019-09-04 11:49:47 -07:00
sommersoft	c4d6f4f536	disable 'audiomixer' for all M0 boards	2019-09-01 17:39:20 -05:00
sommersoft	8120f5cdad	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-08-29 22:14:53 -05:00
Scott Shawcroft	9730d4aa1c	Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x	2019-08-29 14:38:16 -07:00
Scott Shawcroft	0aa5507c4c	add additional pin aliases	2019-08-29 13:41:28 -07:00
Scott Shawcroft	84839de56f	Hallowing M4	2019-08-29 10:34:46 -07:00
jepler	30a9346373	samd: audio_dma: Track channel allocation Previously, we depended on allocated channels to always be "dma_channel_enabled". However, (A) sometimes, many operations would take place between find_free_audio_dma_channel and audio_dma_enable_channel, and (B) some debugging I did led me to believe that "dma_channel_enabled" would become false when the hardware ended a scheduled DMA transaction, but while a CP object would still think it owned the DMA channel. ((B) is not documented in the datasheet and I am not 100% convinced that my debugging session was not simply missing where we were disabling the channel, but in either case, it shows a need to directly track allocated separately from enabled) Therefore, * Add audio_dma_{allocate,free}_channel. * audio_dma_free_channel implies audio_dma_disable_channel * track via a new array audio_dma_allocated[] * clear all allocated flags on soft-reboot * Convert find_free_audio_dma_channel to audio_dma_allocate_channel * use audio_dma_allocated[] instead of dma_channel_enabled() to check availability * remove find_free_audio_dma_channel * For each one, find a matching audio_dma_disable_channel to convert to audio_dma_free_channel Closes: #2058	2019-08-28 17:00:22 -05:00
jepler	0b00787b4d	samd: AudioOut: ensure stopped before deinit .. otherwise, a sequence like >>> a = audioio.AudioOut(board.A0) >>> a.play(sample, loop=True) >>> a.deinit() would potentially leave related DMA channel(s) active.	2019-08-28 16:43:55 -05:00
Scott Shawcroft	0876d5c4ad	Disable bitbangio on Itsy M0 Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files	2019-08-27 15:21:47 -07:00
sommersoft	696117b048	disable audiomixer on boards it doesn't fit on	2019-08-25 14:53:34 -05:00
Scott Shawcroft	7324b70a7c	Rework based on Dan's review	2019-08-23 15:27:21 -07:00
Scott Shawcroft	b992ca80e7	Rejigger builds to fit under 50 minute limit	2019-08-22 20:29:58 -07:00
Scott Shawcroft	72e7ffa324	More cleanup	2019-08-22 16:16:09 -07:00
Scott Shawcroft	fd8050b369	Turn off features to make room for ePaper	2019-08-22 15:19:45 -07:00
Scott Shawcroft	9993a99906	Add initial Monster M4SK build	2019-08-22 14:24:32 -07:00
Scott Shawcroft	3a98de1236	Add reset() to display busses to detect whether it works	2019-08-22 14:23:33 -07:00
Scott Shawcroft	36a23e0fe3	Rework refresh API and factor common display stuff out NOT TESTED! Just compiles Fixes #1691	2019-08-22 14:23:27 -07:00
Scott Shawcroft	c247e7df9c	Begin refresh rework.	2019-08-22 14:08:33 -07:00
Scott Shawcroft	70680d5b22	EPaper displays work mostly.	2019-08-22 14:08:33 -07:00
Dan Halbert	7cc15e56c8	make translate	2019-08-22 15:20:23 -04:00
Scott Shawcroft	6aa311aabd	Merge pull request #2027 from dastels/displayio_fill_area To displayio.Display: expose fill_area and add a property for rotation	2019-08-21 23:48:21 -07:00
Dave Astels	d547d59cba	Merge remote-tracking branch 'adafruit/master' into displayio_fill_area	2019-08-21 15:02:51 -04:00
Dave Astels	dcf36db263	Make room	2019-08-21 14:46:10 -04:00
Dan Halbert	6e3a6d0ac5	typo in IncrementalEncoder.c	2019-08-20 16:23:17 -04:00
Dan Halbert	e00696de7f	merge from upstream and make translate	2019-08-20 13:06:23 -04:00
Dan Halbert	e3dc5e3a66	Merge remote-tracking branch 'adafruit/master' into run-background-tasks Restore dependencies indicated by indentation in circuitpy_mpconfig.h.	2019-08-19 12:41:20 -04:00
Dan Halbert	e2a4c76a37	make nrf touchio be generic: now available for SAMD51 too	2019-08-18 08:44:10 -04:00
Scott Shawcroft	583392a5c6	Merge pull request #2046 from brentru/add-pyportal-titano Add PyPortal Titano	2019-08-12 16:01:10 -07:00
Jeff Epler	d9ee2d28a0	atmel-samd: Use RUN_BACKGROUND_TASKS	2019-08-11 08:53:02 -05:00
brentru	5a8846d33c	remove cruft from prv board	2019-08-08 15:12:01 -04:00
brentru	f87f48ab88	adding pyportal titano board definition	2019-08-08 14:56:28 -04:00
Chris Osterwood	d5658860aa	Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.	2019-08-08 14:39:50 -04:00
Chris Osterwood	fb2712410e	Merge branch 'master' into capablerobot-usbhub	2019-08-08 14:14:23 -04:00
Jeff Epler	33b949abfa	samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines Some ports which actually don't have audioio or audiobusio were still calling into audio_dma_background(). This wasn't an error until the assignment to audio_dma_state in audio_dma_stop was added, though it's not clear why.	2019-08-07 21:29:24 -05:00
Jeff Epler	500d1bb168	samd: audio_dma.c: Remove exceptions, just return early These were most useful debugging, but because this code can be reached "outside of the VM", it's not actually permitted to throw exceptions here.	2019-08-07 20:20:36 -05:00
brentru	1d4700cb6c	add pindefs for tft and tft control	2019-08-07 18:29:20 -04:00
brentru	8f6eac98f3	add defs for pyportal titano	2019-08-07 17:10:31 -04:00
Jeff Epler	39c64bf83c	samd: audio_dma_stop: don't free invalid channel audio_dma_stop can be reached twice in normal usage of AudioOut. This may bear further investigation, but stop it here, by making the function check for a previously freed channel number. This also prevents the event channel from being disabled twice. The first stop location is from audio_dma_get_playing, when the buffers are exhausted; the second is from common_hal_audioio_audioout_stop when checking the 'playing' flag.	2019-08-06 22:00:31 -05:00
Jeff Epler	8b717955ba	samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking It turns out the "disable" error will fire in practice, we'll fix that next.	2019-08-06 22:00:31 -05:00
Jeff Epler	6253f11503	samd: audio_dma_stop: Clear out audio_dma_state[] As identified in #1908, when both AudioOut and PDMIn are used, hard locks can occur. Because audio_dma_stop didn't clear audio_dma_state[], a future call to audio_dma_load_next_block could occur using a DMA object which belongs to PDMIn. I believe that this Closes: #1908 though perhaps it is still not the full story. Testing performed: Loaded a sketch similar to the one on #1908 that tends to reproduce the bug within ~30s. Ran for >300s without hard lock. HOWEVER, while my cpx is no longer hard locking, it occasionally (<1 / 200s) announces Code done running. Waiting for reload. (and does so), even though my main loop is surrounded by a 'while True:' condition, so there are still gremlins nearby.	2019-08-06 21:34:21 -05:00
Scott Shawcroft	eee759455a	Merge pull request #2018 from keith-packard/snekboard Add board support for keithp.com SnekBoard	2019-07-31 16:38:51 -07:00
Scott Shawcroft	366fdcce18	Merge pull request #2011 from tannewt/ssd1322 Add knobs for SSD1322 and two displayio fixes.	2019-07-30 14:15:37 -07:00
Scott Shawcroft	9dd56b1566	Merge branch 'master' into snekboard	2019-07-30 14:12:08 -07:00
wallarug	ecfffac3a8	Delete samd51x19-bootloader-external-flash-crystalless.ld	2019-07-30 19:48:35 +10:00
wallarug	ff6ae1aefb	Update mpconfigboard.mk to use standard linker file	2019-07-30 19:13:33 +10:00
Keith Packard	c6e4ddc88a	boards/snekboard: Delete SPI object reference Snekboard does not expose any pins for SPI to the user, so delete the SPI object reference as that won't work. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:45:52 -07:00
Keith Packard	9a37c8a4b3	boards/snekboard: Add pin aliases for UART and I2C Allow users to use TX/RX and SDA/SCL names. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:45:06 -07:00
Keith Packard	4387ecfdfb	Update snekboard PID to official value Snekboard has been assigned the following PIDs: PID 0x004D # bootloader PID 0x804D # arduino PID 0x804E # circuitpython Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:15:18 -07:00
Keith Packard	326df70ac2	Fix snekboard names Manufacturer -- keithp.com Product -- snekboard Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:15:18 -07:00
Keith Packard	56f710f64f	Add board support for keithp.com SnekBoard This is another SAMDG2118A design with built-in 9V motor controllers that are designed to be used with Lego PowerFunctions devices. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:14:37 -07:00
wallarug	dc1eb73ee7	Merge branch 'master' into wallarug-robohat	2019-07-29 21:53:49 +10:00
wallarug	8974c7e843	Added BUTTON to pins.c	2019-07-29 16:37:53 +10:00
wallarug	9e0bea405d	Added BUTTON to pins.c	2019-07-29 16:37:21 +10:00
wallarug	4d30efdc2a	Updated pins.c for GROVE.	2019-07-29 16:29:48 +10:00
wallarug	8838e25cb2	Update pins.c	2019-07-29 16:28:35 +10:00
sommersoft	8eab946c5b	Merge pull request #2003 from C47D/travis_check_new_boards Add check to travis to make sure new boards are built, fix #1886	2019-07-28 22:41:59 -05:00
wallarug	0f30070d58	updated naming schema to match other boards	2019-07-27 17:44:42 +10:00
wallarug	b06fa48735	updated a few files	2019-07-27 16:59:07 +10:00
wallarug	9c57f52d1e	updated pins.c for robohat	2019-07-27 16:56:03 +10:00
wallarug	24e84adc6d	further robohat cleanups	2019-07-27 16:38:47 +10:00
wallarug	e2b83e2dd9	minor changes robohat d21	2019-07-27 16:36:13 +10:00
wallarug	36008de2ed	added custom ld file for samd51 no crystal, ext flash	2019-07-27 16:29:30 +10:00
wallarug	eda3423e35	updated to v1.7 board (samd51)	2019-07-27 16:27:41 +10:00
Scott Shawcroft	c61c874a6d	Reduce feather_m0_supersized build size Make it match feather_m0_express	2019-07-26 00:31:41 -07:00
Scott Shawcroft	a87094e01f	Turn off GC opt to save space on Trinket Haxpress	2019-07-25 22:56:46 -07:00
Scott Shawcroft	4e7de436b4	Update constructors of boards with displays	2019-07-25 22:48:11 -07:00
Jeff Epler	6b44e40ee8	audiocore: Factor from audioio When nrf pwm audio is introduced, it will be called `audiopwmio`. To enable code sharing with the existing (dac-based) `audioio`, factor the sample and mixer types to `audiocore`. INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must be imported from `audiocore`, not `audioio`.	2019-07-25 06:44:26 -05:00
Dan Halbert	82ab998cd5	Merge pull request #1998 from tannewt/monocolor Add support for grayscale displays	2019-07-22 22:30:28 -04:00
Scott Shawcroft	7cb2aa2d62	Merge pull request #1986 from AnthonyDiGirolamo/patch-1 Update Arch Linux ARM compiler installation instructions	2019-07-22 19:29:53 -07:00
Scott Shawcroft	1d1b8703b6	Review feedback including NO_BRIGHTNESS_COMMAND macro	2019-07-19 16:11:13 -07:00
Scott Shawcroft	b9b9ef227f	Turn off bitbanging on Hallowing to save code space.	2019-07-19 16:10:33 -07:00
Scott Shawcroft	cdfc169ab6	Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.	2019-07-19 16:10:32 -07:00
Scott Shawcroft	6797ec6ed3	Add support for grayscale displays that are < 8 bit depth. This also improves Palette so it stores the original RGB888 colors. Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly useful for the SSD1306. Fixes #1828. Fixes #1956	2019-07-19 16:06:11 -07:00
Kattni Rembor	582acdaa0a	Requested changes.	2019-07-09 16:12:24 -04:00
Kattni Rembor	d905958db1	Adding PyRuler to CircuitPython.	2019-07-09 16:02:39 -04:00
Scott Shawcroft	f0cf9a4e75	Merge pull request #1988 from jandjstudios/datum Add support for boards in the datum series.	2019-07-09 09:33:13 -07:00
Scott Shawcroft	f4a64a2e80	Merge pull request #1989 from rce1086/master Added conditional compilation around selection of TX pad candidates	2019-07-08 14:07:04 -07:00
Carl Elkins	64507207da	Added conditional compilation around selection of TX pad candidates Original code was correct for SAMD21 New code for SAMD51 only permits pad-0 for TX	2019-07-08 02:08:39 +01:00
jandjstudios	46b7575550	Initial commit to support boards in the datum series.	2019-07-06 13:41:03 -07:00
iot49	4c72a3991e	updated samd and esp8266 ports	2019-07-05 10:01:51 -07:00
Anthony DiGirolamo	55f15e3c05	Update Arch Linux ARM compiler installation instructions - Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example - Add `arm-none-eabi-newlib` as a required package for Arch - Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/) as an optional package. Without it users will get errors about missing header files like: ``` In file included from asf4/samd51/include/samd51j19a.h:49, from asf4/samd51/include/sam.h:38, from ./mpconfigport.h:31, from ../../py/mpconfig.h:45, from ../../py/emitnx64.c:3: /usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory 9 \| # include_next <stdint.h> \| ^~~~~~~~~~ compilation terminated. ```	2019-07-04 11:14:50 -07:00
Chris Osterwood	97e7fea517	Change pin names to be more descriptive	2019-07-04 13:23:57 -04:00
Chris Osterwood	539502c891	Remove pin reservations. Prevents used from inside of CircuitPython code	2019-07-04 13:22:36 -04:00
Radomir Dopieralski	e45eac5016	Switch the terminal font for ugame10 I designed this really tiny, minimalist font for use on very small displays. On uGame it lets one see the whole text that CircuitPython prints on boot. The characters are 4x6 pixels each, and they are optimized for legibility (large x-height, right angles, blocky shapes). It might make sense to also use that font in other boards.	2019-07-01 23:05:07 +02:00
Scott Shawcroft	0cce7fcaa3	Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402	2019-06-27 14:06:26 -07:00
Scott Shawcroft	fe507db45f	Shrink pIRkey build down. Rollback HID to save string space and remove board mapping for default buses that don't exist.	2019-06-26 16:49:23 -07:00
Scott Shawcroft	7ad229ec27	Merge pull request #1958 from tannewt/pygamer_advanced Add PyGamer Advance and fix Joystick pins	2019-06-19 12:32:36 -07:00
Scott Shawcroft	5e5252ced0	Merge pull request #1955 from pewpew-game/pygamer-stage Add support for PyGamer to Stage library	2019-06-18 18:23:08 -07:00
Scott Shawcroft	352bf7eaf5	Add PyGamer Advance and fix Joystick pins	2019-06-18 12:22:20 -07:00
Radomir Dopieralski	5803245009	Add support for PyGamer to Stage library	2019-06-18 19:05:51 +02:00
Scott Shawcroft	2dddccb99e	Update board inits for new api.	2019-06-17 18:03:30 -07:00
brentru	ea2c068e11	COLMOD is 1 param, remove CASET/RASET in CircuitPython	2019-06-17 11:20:25 -04:00
brentru	207dc885a6	removed incorrect gamma code, looks better now	2019-06-14 16:34:30 -04:00
brentru	4092294e7c	tft working init. sequence, still undersaturated	2019-06-14 16:17:05 -04:00
brentru	0bc74172a2	Add pybadge airlift, sans-tft	2019-06-14 14:46:19 -04:00
Scott Shawcroft	0b1f605a9b	Turn off gc opt for more M0 boards	2019-06-12 13:20:21 -07:00
Scott Shawcroft	a91ad05774	Change to one lto partition for ultimate optimization.	2019-06-12 11:37:46 -07:00
Scott Shawcroft	eb21fc3e31	Add partial display update support. Different operations to the display tree have different costs. Be aware of these costs when optimizing your code. * Changing tiles indices in a TileGrid will update an area covering them all. * Changing a palette will refresh every object that references it. * Moving a TileGrid will update both where it was and where it moved to. * Adding something to a Group will refresh each individual area it covers. * Removing things from a Group will refresh one area that covers all previous locations. (Not separate areas like add.) * Setting a new top level Group will refresh the entire display. Only TileGrid moves are optimized for overlap. All other overlaps cause sending of duplicate pixels. This also adds flip_x, flip_y and transpose_xy to TileGrid. They change the direction of the pixels but not the location. Fixes #1169. Fixes #1705. Fixes #1923.	2019-06-12 11:32:39 -07:00
Dan Halbert	ba1b36a800	Uncomment vm.c SUPEROPT (debugging typo); trim a few builds	2019-06-12 13:09:09 -04:00
Dan Halbert	1bb4fccc3b	Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files	2019-06-12 11:08:22 -04:00
Dan Halbert	0b3f29780a	shrink a bunch of builds to fit	2019-06-11 18:46:06 -04:00
Dan Halbert	4fc189b60c	Merge latest 4.0.x fixes into master	2019-06-11 16:16:29 -04:00
shazz	9c49af0597	Added pin for SD CS	2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter	1da8d4b4da	Add PS/2 support -- ps2io module	2019-06-04 18:05:46 -03:00
Dan Halbert	bcda5e133d	Merge pull request #1903 from tannewt/get_area Rework the pixel computation to use areas	2019-05-31 21:27:06 -04:00
Dan Halbert	4e85c1ef91	Implement forced clean builds for boards so designated. Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds. Fixes #1910.	2019-05-24 15:32:24 -04:00
Dan Halbert	e84f3b1c6a	make crickit cpx pinyin build fit	2019-05-23 21:22:50 -04:00
Scott Shawcroft	3fad7de8db	Rework the pixel computation to use areas This changes the displayio pixel computation from per-pixel to per-area. This is precursor work to updating portions of the screen (#1169). It should provide mild speedups because bounds checks are done once per area rather than once per pixel. Filling by area also allows TileGrid to maintain a row-associative fill pattern even when the display's refresh is orthogonal to it.	2019-05-21 17:41:06 -07:00
Dan Halbert	0199d9810b	Make pinyin fit on cpx	2019-05-21 15:18:56 -04:00
Dan Halbert	008bbc944c	correct USB PIDs for several boards	2019-05-16 10:54:15 -04:00
Scott Shawcroft	f3ab820fc2	Merge pull request #1884 from CapableRobot/capablerobot-usbhub Added board definition for Capable Robot Programmable USB Hub	2019-05-14 13:42:51 -07:00
Chris Osterwood	a0497553fc	Fix to prevent critical pins from being reset when MCU restarts or enters REPL	2019-05-14 15:23:33 -04:00
Chris Osterwood	420dbafa9d	Added board definition for Capable Robot Programmable USB Hub	2019-05-14 13:28:24 -04:00

... 10 11 12 13 14 ...

1888 Commits