circuitpython

Author	SHA1	Message	Date
Jeff Epler	493679da3b	CAN.listen: block until a message comes in or timeout is reached	2020-09-21 16:44:26 -05:00
Jeff Epler	9e8f1820c8	canio.CAN: switch rx/tx, make both mandatory, move declarations around	2020-09-21 16:44:26 -05:00
Jeff Epler	fd9df164c0	canio: Message: remove size property This is just duplicating what len(message.data) gives you.	2020-09-21 16:44:26 -05:00
Jeff Epler	7fd6cab2ac	canio: Make both tx and rx (but not both) optional .. loopback and silent come from the (optional) constructor parameters not guessing based on the pin specification .. docstring & comment improvements	2020-09-21 16:44:26 -05:00
Jeff Epler	c39ec1581e	_canio: Message: setting data clears rtr, and vice versa	2020-09-21 16:44:26 -05:00
Jeff Epler	44c5b2bbb1	Respond to review comments Thanks @tannewt!	2020-09-21 16:44:26 -05:00
Jeff Epler	a69b298aed	Whitespace	2020-09-21 16:44:26 -05:00
Jeff Epler	27cbb690e5	_canio: Add listener matching Lightly tested: * no matches (catch-all) * standard address single address matches (even and odd positions) * standard address mask matches * only tested that extended doesn't match non-extended	2020-09-21 16:44:26 -05:00
Jeff Epler	2cb4707f92	Message: add extended address flag	2020-09-21 16:44:26 -05:00
Jeff Epler	40d4a69133	more doc improvements	2020-09-21 16:44:26 -05:00
Jeff Epler	1eb0587917	correct docstring	2020-09-21 16:44:26 -05:00
Jeff Epler	635fcadb59	_canio.CAN: add error handling & bus state	2020-09-21 16:44:26 -05:00
Jeff Epler	f8dcf2118e	_canio: Add _canio.State enum-like class	2020-09-21 16:44:26 -05:00
Jeff Epler	37af9dde90	Listener: fix doc markup, include in globals of its module	2020-09-21 16:44:26 -05:00
Jeff Epler	a2e1867f69	_canio: Minimal implementation for SAM E5x MCUs Tested & working: * Send standard packets * Receive standard packets (1 FIFO, no filter) Interoperation between SAM E54 Xplained running this tree and MicroPython running on STM32F405 Feather with an external transceiver was also tested. Many other aspects of a full implementation are not yet present, such as error detection and recovery.	2020-09-21 16:44:26 -05:00
Ryan T. Hamilton	04ffd0dca0	Add gateway, subnet, and rssi info for current connected AP ap_rssi is a bound method, which I'm not keen on, but it works	2020-09-19 13:38:04 -07:00
Dan Halbert	dfd09bba57	Merge pull request #3433 from astrobokonon/esp32s2-bssid ESP32S2: Allow connecting to specific bssid	2020-09-18 21:31:15 -04:00
Jeff Epler	28043c94b5	supervisor: Improve serial connection detection These changes remove the caveat from supervisor.runtime.serial_connected. It appears that _tud_cdc_connected() only tracks explicit changes to the "DTR" bit, which leads to disconnects not being registered. Instead: * when line state is changed explicitly, track the dtr value in _serial_connected * when the USB bus is suspended, set _serial_connected to False Testing performed (using sam e54 xplained): Run a program to show the state of `serial_connected` on the LED: ``` import digitalio import supervisor import board led = digitalio.DigitalInOut(board.LED) while True: led.switch_to_output(not supervisor.runtime.serial_connected) ``` Try all the following: * open, close serial terminal program - LED status tracks whether terminal is open * turn on/off data lines using the switchable charge-only cable - LED turns off when switch is in "charger" position - LED turns back on when switch is in Data position and terminal is opened (but doesn't turn back on just because switch position is changed)	2020-09-17 18:32:06 -05:00
Ryan T. Hamilton	1e3241ec6d	Merge branch 'main' into esp32s2-bssid	2020-09-16 17:15:01 -07:00
Ryan T. Hamilton	daa1dd278d	connect now accepts bssid	2020-09-16 16:25:17 -07:00
Dan Halbert	d774678a0f	Merge pull request #3369 from kamtom480/camera Add camera module	2020-09-16 12:29:58 -04:00
Kamil Tomaszewski	61687c81d8	camera: Pass width and height to take_picture()	2020-09-16 13:55:57 +02:00
Ryan T. Hamilton	fead60d2d8	Add BSSID to Network	2020-09-15 23:32:53 -07:00
Scott Shawcroft	3d8bac50e4	Merge pull request #3397 from tannewt/fix_size_0_bug Fix bug with socket.recv_into size == 0.	2020-09-14 14:47:28 -07:00
Kamil Tomaszewski	ce7ee58e92	camera: Update camera module	2020-09-14 13:12:20 +02:00
Kamil Tomaszewski	c2fc592c2c	camera: Change API	2020-09-14 13:11:15 +02:00
Kamil Tomaszewski	064c597b60	camera: Implement new library for camera	2020-09-14 13:11:15 +02:00
Jeff Epler	a81a2cff02	Merge pull request #3411 from jepler/ble-doc-typo _bleio: fix markup typo	2020-09-13 12:50:12 -05:00
Jeff Epler	e5122b1acf	_bleio: fix markup typo	2020-09-13 11:56:34 -05:00
Carl Karsten	2f058029e9	doc fix: remove the text about the non-existing clock specification	2020-09-12 15:25:04 -05:00
Scott Shawcroft	8f58669ddd	Fix bug with socket.recv_into size == 0. It returned 0 when it should have filled the buffer. Python reference: https://docs.python.org/3/library/socket.html#socket.socket.recv_into	2020-09-11 16:17:20 -07:00
Scott Shawcroft	9256e6b376	Merge pull request #3302 from xiongyihui/main support to get HID OUT report	2020-09-10 17:35:04 -07:00
Dan Halbert	f0bb9635bf	MIssed one change for .last_received_report	2020-09-10 14:21:36 -04:00
Dan Halbert	40f3cd3615	Change `.report` to `.last_received_report`	2020-09-10 13:26:51 -04:00
Scott Shawcroft	96cf60fbbd	Merge remote-tracking branch 'adafruit/main' into native_wifi	2020-09-03 16:34:56 -07:00
Scott Shawcroft	0b94638aeb	Changes based on Dan's feedback	2020-09-03 16:32:12 -07:00
Scott Shawcroft	5d17d6402d	Merge pull request #3366 from kmatch98/refresh_now Update refresh to force immediate redraw with `display.refresh()`	2020-09-02 16:37:46 -07:00
Scott Shawcroft	786f4ed114	Merge pull request #3344 from jepler/issue-3184 Fix RGBMatrix, FrameBufferDisplay bugs	2020-09-02 15:32:30 -07:00
Jeff Epler	17a5a85528	rgbmatrix: Move struct definition to shared-module, rename 'core' member	2020-09-02 13:34:16 -05:00
Kevin Matocha	d224183a7e	Delete trailing whitespace	2020-09-02 11:26:37 -05:00
Kevin Matocha	8256bf7ea6	Add backticks to function references in docs	2020-09-02 11:20:30 -05:00
Kevin Matocha	4b9306aa7c	Cleanup for sphinx	2020-09-01 18:10:40 -05:00
Kevin Matocha	554cc356db	Delete trailing whitespace	2020-09-01 15:43:18 -05:00
Kevin Matocha	7b6d805580	Add Optional[int] to docs string	2020-09-01 15:40:55 -05:00
Kevin Matocha	649a955a74	Modified docs to try to pass sphinx build	2020-09-01 15:02:37 -05:00
Kevin Matocha	c6529daac5	Added some backticks to clarify the docs	2020-09-01 14:44:32 -05:00
Kevin Matocha	f5015e4485	Add hanging tab to doc	2020-09-01 14:36:43 -05:00
Kevin Matocha	e14de38528	Revise .refresh input default value for target_frames_per_second to None	2020-09-01 13:57:19 -05:00
Dan Halbert	4e3cb55ce7	share more of _bleio dict; fix one doc error	2020-09-01 12:41:58 -04:00
Kevin Matocha	8be862e644	Remove trailing whitespace	2020-09-01 10:26:48 -05:00
Kevin Matocha	c4b1db006f	delete unnecessary comment	2020-09-01 09:38:57 -05:00
Kevin Matocha	fc513956be	Update refresh to force immediate redraw with display.refresh() or display.refresh(target_frames_per_second=None), even with auto_refresh=False	2020-09-01 09:36:29 -05:00
Dan Halbert	f5a5fc4c84	Fix stub; mismatched triple quotes	2020-08-30 14:59:03 -04:00
Dan Halbert	6dbd369272	merge from upstream	2020-08-30 14:39:03 -04:00
Dan Halbert	b27d511251	address review; use constructor for HCI Adapter	2020-08-30 14:06:48 -04:00
Scott Shawcroft	46dc133d04	Fix stub and doc builds	2020-08-26 17:18:16 -07:00
Scott Shawcroft	8b71e26abd	Merge remote-tracking branch 'adafruit/main' into native_wifi	2020-08-25 16:39:23 -07:00
Scott Shawcroft	380cbfba55	Add hash to Socket so it can be used in dicts	2020-08-25 16:15:45 -07:00
Scott Shawcroft	f3bc712539	Fix SocketPool radio check	2020-08-25 16:15:00 -07:00
Scott Shawcroft	1527a3ce92	Merge remote-tracking branch 'adafruit/main' into add_pwmio	2020-08-24 18:25:18 -07:00
Scott Shawcroft	5b1a1c773f	Merge pull request #3275 from kmatch98/bitmap_v2 Add `bitmap.blit` command for bitmap copy	2020-08-24 17:58:53 -07:00
Kevin Matocha	f55f2bfee1	shorten error strings	2020-08-21 21:40:46 -05:00
Kevin Matocha	7f629624db	Added hanging indents to docs per @sommersoft's suggestion	2020-08-21 20:50:15 -05:00
Kevin Matocha	983e1af33d	remove other extraneous files	2020-08-21 19:10:13 -05:00
Kevin Matocha	dc502a5f26	remove extraneous files	2020-08-21 19:08:25 -05:00
Kevin Matocha	5b6313e642	More tweaks to try to fix documentation failing	2020-08-21 16:13:18 -05:00
Kevin Matocha	f1fb2cde17	Minor tweaks to try to fix documentation failing	2020-08-21 16:12:40 -05:00
Dan Halbert	770c204d5a	sphinx fixes	2020-08-21 17:03:45 -04:00
Kevin Matocha	9a6a156512	Update documentation string with blank line	2020-08-21 15:26:50 -05:00
Scott Shawcroft	644d2ba7a2	Add more "extern" declarations for gcc10 compat gcc has tightened the restrictions on forward declarations that lack "extern". Fix them up.	2020-08-21 14:39:37 -05:00
Kevin Matocha	a9f6d147c4	Merge adafruit/main latest	2020-08-21 14:37:32 -05:00
Kevin Matocha	7e529ed4c5	Merge with latest adafruit/main	2020-08-21 14:28:24 -05:00
Kevin Matocha	3753ea3cd8	Merge remote-tracking branch 'source/main' into main	2020-08-21 14:19:58 -05:00
Kevin Matocha	24ca133396	Updating main to adafruit/main	2020-08-21 14:19:28 -05:00
Kevin Matocha	3747ea29c2	Merge remote-tracking branch 'source/main' into main	2020-08-21 14:14:38 -05:00
Scott Shawcroft	9a8b4e98bf	Add empty lines	2020-08-21 11:36:50 -07:00
Scott Shawcroft	83deea0e03	Fix copy pasta and stub build	2020-08-21 11:17:42 -07:00
Scott Shawcroft	a5b01f7361	Merge remote-tracking branch 'adafruit/main' into add_pwmio	2020-08-21 11:13:53 -07:00
Scott Shawcroft	701e80a025	Make socket reads interruptable	2020-08-21 11:00:02 -07:00
Dan Halbert	8d785cbbe5	fix stubs; make translate	2020-08-21 11:37:15 -04:00
Dan Halbert	f714f53552	Merge remote-tracking branch 'adafruit/main' into ble_hci	2020-08-21 10:45:05 -04:00
Dan Halbert	0e30dd8bcc	merge from upstream; working; includes debug_out code for debugging via Saleae for posterity	2020-08-20 20:29:57 -04:00
Scott Shawcroft	400701004b	Merge pull request #3279 from hierophect/esp32-pulseinout ESP32-S2: Add PulseOut and PulseIn	2020-08-20 11:24:08 -07:00
Scott Shawcroft	80b15f6b3b	Add error handling w/temp debug logs	2020-08-19 17:51:33 -07:00
Scott Shawcroft	eb8b42aff1	Add basic error handling	2020-08-19 14:23:28 -07:00
Scott Shawcroft	dcc42f6281	Remove debug prints	2020-08-19 14:23:28 -07:00
Scott Shawcroft	b3a449c276	Turn on json and enable socket.close	2020-08-19 14:23:28 -07:00
Scott Shawcroft	430530c74b	SSL works until it runs out of memory	2020-08-19 14:23:28 -07:00
Scott Shawcroft	eb2c38825e	HTTP works with my adafruit_requests	2020-08-19 14:23:18 -07:00
Scott Shawcroft	c9ece21c28	SocketPool stubbed out	2020-08-19 14:22:13 -07:00
Scott Shawcroft	7bdd243bf6	Ping works!	2020-08-19 14:22:13 -07:00
Scott Shawcroft	3860991111	Ping work and start to add socketpool	2020-08-19 14:22:13 -07:00
Scott Shawcroft	c53a72d3f5	Fix ipaddress import and parse ipv4 strings	2020-08-19 14:22:13 -07:00
Scott Shawcroft	c62ab6e09a	Add ipaddress	2020-08-19 14:22:12 -07:00
Scott Shawcroft	ddcff85fa2	Add debugging. Scanning doesn't crash but returns no results. Need to config station.	2020-08-19 14:22:12 -07:00
Scott Shawcroft	1a6f4e0fe0	Scanning WIP. Need to sort out supervisor memory	2020-08-19 14:22:12 -07:00
Scott Shawcroft	c5b8401a15	First crack at native wifi API	2020-08-19 14:21:59 -07:00
Yihui Xiong	9aca580195	fix	2020-08-19 21:33:51 +08:00
Yihui Xiong	8bab7b664c	support to get HID OUT report	2020-08-19 20:18:17 +08:00
Scott Shawcroft	6857f98426	Split pulseio.PWMOut into pwmio This gives us better granularity when implementing new ports because PWMOut is commonly implemented before PulseIn and PulseOut. Fixes #3211	2020-08-18 13:08:33 -07:00
Lucian Copeland	da75445cd5	Style changes, reposition runtime errors	2020-08-18 11:42:06 -04:00
Dan Halbert	6e5c2b3fe2	Merge pull request #3260 from rhooper/pixelbuf-iterable Make pixelbuf support iterables and floats	2020-08-17 11:56:31 -04:00
Kevin Matocha	6c199c5d69	Update documentation to remove whitespaces	2020-08-15 15:58:04 -05:00
Dan Halbert	1c8e11b2cb	bug in char get_value; raise NotImpl; better arg validation	2020-08-14 23:38:58 -04:00
Lucian Copeland	0fc730bc5a	Expand PulseOut API, debug cleanup	2020-08-14 16:36:02 -04:00
Kevin Matocha	bfa9904f3e	Corrected erroneous edit to fill description to -> None	2020-08-14 14:28:06 -05:00
Kevin Matocha	e84723abba	Bug fixes related to input parameter handling x1,y1. Update comments	2020-08-14 14:22:34 -05:00
Kevin Matocha	b1fce9e933	Deleted trailing whitespace	2020-08-14 13:36:59 -05:00
Kevin Matocha	a66ef32da2	Added inclusive indexing for x2,y2, fixed default value handling for x1,y1, added bitmap palette comparison	2020-08-14 13:15:01 -05:00
Margaret Matocha	824f47d6e9	Added bitmap.blit function for bitmap slice copy	2020-08-14 12:59:57 -05:00
Margaret Matocha	4ba9ff892c	Added bitmap.blit function for copying slices of bitmaps	2020-08-14 12:59:48 -05:00
Lucian Copeland	f9512983ff	Add PulseOut	2020-08-14 12:21:41 -04:00
Yihui Xiong	52990a332d	fix	2020-08-14 17:48:15 +08:00
Kevin Matocha	14f5d03b6d	bringing up to date	2020-08-13 18:59:00 -05:00
Scott Shawcroft	ff5902f9f8	Merge branch 'main' into pixelbuf-iterable	2020-08-13 11:55:51 -07:00
Yihui Xiong	e7da652711	able to change ble mac address	2020-08-13 16:54:29 +08:00
Jeff Epler	c1400bae9b	sharpmemory: Implement support for Sharp Memory Displays in framebufferio	2020-08-12 07:32:18 -05:00
Jeff Epler	9c4f644641	framebufferio: add dirty row tracking	2020-08-12 07:32:18 -05:00
Dan Halbert	06f3b4048a	fix #3228 for nrf; still needs to be fixed for HCI; tested	2020-08-11 16:21:16 -04:00
Roy Hooper	1b7709f325	use the stack	2020-08-10 18:42:05 -04:00
Roy Hooper	ef1782f85e	fix trailing whitespace	2020-08-10 12:04:44 -04:00
Roy Hooper	00a3a25b94	revert error to avoid translation changes	2020-08-08 18:40:45 -04:00
sommersoft	ce9bc1258a	support_matrix.rst: pre-process space chars in internal link names; would cause a no-id situation when names like 'ndGarage[n°] Bit6: FeatherSnow-v2' were parsed.	2020-08-08 11:37:49 -05:00
Dan Halbert	0f4b969d62	discovery of Nordic UART service working	2020-08-08 00:29:37 -04:00
sommersoft	c374368053	support_matrix.rst: add internal links to boards in the table	2020-08-07 22:52:34 -05:00
Roy Hooper	e73dba21d2	make pixelbuf handle floats and iterables	2020-08-07 18:42:06 -04:00
Margaret Matocha	64c9baa6aa	Added bitmap.insert function for slice copy into a bitmap from another bitmap	2020-08-07 15:46:00 -05:00
Jeff Epler	354edd9431	Merge pull request #3252 from ciscorn/pyi Some improvements to the core module docs	2020-08-07 10:11:40 -05:00
Taku Fukada	56c898da80	Modify some Python stubs	2020-08-07 01:01:28 +09:00
Taku Fukada	887eb3b6d9	Apply a Sphinx transform to make the core module docs look better	2020-08-07 00:01:31 +09:00
Jeff Epler	93b373d617	"pop from empty %q" Saves 12 bytes code on trinket m0	2020-08-04 18:42:09 -05:00
Jeff Epler	c37a25f0e5	Use qstrs to save an additional 4 bytes	2020-08-04 14:45:45 -05:00
Jeff Epler	dddd25a776	Combine similar strings to reduce size of translations This is a slight trade-off with code size, in places where a "_varg" mp_raise variant is now used. The net savings on trinket_m0 is just 32 bytes. It also means that the translation will include the original English text, and cannot be translated. These are usually names of Python types such as int, set, or dict or special values such as "inf" or "Nan".	2020-08-04 13:34:29 -05:00
Dan Halbert	0a60aee3e4	wip: compiles	2020-08-02 11:36:38 -04:00
Jeff Epler	d69f081c04	Merge remote-tracking branch 'origin/main' into blm_badge	2020-07-30 07:24:48 -05:00
Christian Walther	8498e7f2cd	Fix inability to set values in 32-bit Bitmap.	2020-07-30 00:35:25 +02:00
Scott Shawcroft	5e86262694	Merge pull request #3187 from jepler/ulab-restructure-document Upgrade ulab	2020-07-29 10:48:27 -07:00
Scott Shawcroft	05a1519e5d	Merge pull request #3214 from kmatch98/bitmap_write Updated Group.c to correct bug with insert into displayio.Group	2020-07-29 10:46:33 -07:00
Jeff Epler	9b8df7f635	Upgrade ulab This version * moves source files to reflect module structure * adds inline documentation suitable for extract_pyi * incompatibly moves spectrogram to fft * incompatibly removes "extras" There are some remaining markup errors in the specific revision of extmod/ulab but they do not prevent the doc building process from completing.	2020-07-28 16:57:48 -05:00
Margaret Matocha	0887bc2112	Updated to remove else statment, attempt to remove excess mpy-cross... file	2020-07-28 15:03:51 -05:00
Margaret Matocha	076c5f946f	Updated to remove unnecessary else statement	2020-07-28 14:53:50 -05:00
Margaret Matocha	fd7801415a	Deleted mpy-cross file	2020-07-28 14:53:09 -05:00
Dan Halbert	aa97ea2501	Merge remote-tracking branch 'adafruit/main' into blm_badge	2020-07-28 14:15:02 -04:00
Dan Halbert	e5e132a364	add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT	2020-07-28 11:49:54 -04:00
Margaret Matocha	db26e894fb	Updated Group.c to correct bug with insert into groups	2020-07-27 22:25:21 -05:00
Taku Fukada	d356581651	Fix several type hints	2020-07-27 18:05:13 +09:00
Taku Fukada	54a342a7f5	Add and correct some type hints	2020-07-24 18:20:03 +09:00
Scott Shawcroft	543708416b	Merge pull request #3195 from tannewt/remove_i2c_stop Remove stop kwarg from I2C writeto.	2020-07-23 14:39:51 -07:00
Scott Shawcroft	4b6e02949d	Remove stop kwarg from I2C writeto. Fixes #2082	2020-07-23 11:06:14 -07:00
Scott Shawcroft	2bd6d05663	Add externs. GCC10 complains about duplicate defines	2020-07-22 16:26:46 -07:00
Scott Shawcroft	049921fec8	Merge branch 'main' into memmonitor	2020-07-22 14:00:28 -07:00
Scott Shawcroft	1ec3580946	Merge branch 'main' into memmonitor	2020-07-22 12:24:19 -07:00
Scott Shawcroft	eb24653d3f	Fix BluetoothError doc typo we copied	2020-07-21 18:30:29 -07:00
Scott Shawcroft	ee019a96ba	Updates based on review	2020-07-21 16:08:41 -07:00
dherrada	9e3fa863f1	Merge branch 'main' into type_hints	2020-07-21 16:18:51 -04:00
Scott Shawcroft	0c6935e336	Merge branch 'main' into disable_network	2020-07-20 16:28:22 -07:00
Kenny	efeae0d84f	fix 3169: Polygon.points property The getter for vectorio.Polygon#points was not updated with the data type change of the stored points list. This moves the implementation to shared_module and updates the data type to reflect the actual state.	2020-07-19 12:27:35 -07:00
Scott Shawcroft	610e0171aa	Disable existing native networking. We're moving towards a co-processor model and a Wiznet library is already available. New native APIs will replace these for chips with networking like the ESP32S2 but they won't be these.	2020-07-17 17:43:02 -07:00
Scott Shawcroft	07f031c708	Add ignore() and fix docs	2020-07-17 17:15:04 -07:00
Scott Shawcroft	a1e4814a27	Get AllocationAlarm working	2020-07-17 17:15:03 -07:00
Scott Shawcroft	518d909b2c	Add memorymonitor module	2020-07-17 17:15:03 -07:00
dherrada	612c6bb86b	Merge branch 'main' into type_hints	2020-07-17 14:55:30 -04:00
dherrada	d64b4e3059	Made more requested changes	2020-07-17 14:53:51 -04:00
Dan Halbert	6494bbdc64	snapshot	2020-07-16 23:14:49 -04:00
dherrada	bfcaa4b2b4	Made requested changes in displayio	2020-07-16 16:11:22 -04:00
Dan Halbert	b08b0264cc	back to working; check for extended advertising support	2020-07-15 09:46:13 -04:00
Scott Shawcroft	08375c7930	Merge pull request #2780 from AndrewR-L/patch-1 busio/UART: Correct and clarify readline() return.	2020-07-13 16:29:58 -07:00
Scott Shawcroft	51c888d4be	Merge pull request #3003 from Flameeyes/master License tagging according to REUSE specifications.	2020-07-13 16:28:49 -07:00
Dan Halbert	f6869c69c5	wip: advertising; not tested	2020-07-12 19:45:23 -04:00
Dan Halbert	f03045b97e	address working; improved pkt dump	2020-07-08 23:15:48 -04:00
Jeff Epler	6d97f6fccc	audioio: Remove compatibility code These items were aliased from audiocore to audioio for compatibility with 4.x, but according to our deprecation schedule can be removed in 6.0.	2020-07-08 20:31:35 -05:00
Dan Halbert	a5ab2829eb	use zephyr include files; wip: compiles	2020-07-08 09:33:41 -04:00
Diego Elio Pettenò	34b4993d63	Add license to some obvious files.	2020-07-06 19:16:25 +01:00
dherrada	bce77adecd	Added type hints previously missed	2020-07-03 16:03:19 -04:00
dherrada	9911b64fa1	Added type hints to ustack	2020-07-03 15:52:53 -04:00
dherrada	657c651e0e	Added type hints to uheap	2020-07-03 15:51:39 -04:00
dherrada	4c5a9d1e3a	Added type hints to time	2020-07-03 15:49:51 -04:00
dherrada	4758081e10	Added type hints to struct	2020-07-03 15:45:29 -04:00
dherrada	45b6e0174e	Added type hints to storage	2020-07-03 15:38:40 -04:00
dherrada	a88004e509	Added type hints to rtc	2020-07-03 15:27:11 -04:00
dherrada	97d405e109	Added type hints to random	2020-07-03 15:25:58 -04:00
dherrada	e237dfe3c5	Added type hints to os	2020-07-03 15:18:44 -04:00
dherrada	aaa550b33e	Added type hints to network	2020-07-03 15:10:56 -04:00
dherrada	9122d0b9f4	Added type hints to multiterminal	2020-07-03 15:08:16 -04:00
dherrada	591cc1a243	Added type hints to math	2020-07-03 15:04:43 -04:00
dherrada	f56deb60c6	Added type hints to _eve	2020-07-03 14:48:16 -04:00
dherrada	d0d949cd24	Made every init return None	2020-07-03 14:23:34 -04:00
dherrada	d358c915c3	Fixed init formatting	2020-07-03 14:00:06 -04:00
dherrada	3df03a5650	Made most of the requested changes	2020-07-03 13:49:00 -04:00
dherrada	843ff5d302	Added type hints to wiznet	2020-07-03 11:44:16 -04:00
dherrada	5163618d23	Added type hints to watchdog	2020-07-03 11:42:07 -04:00
dherrada	9c842c5a67	Added type hints to usb_midi	2020-07-03 11:40:20 -04:00
dherrada	e089862a6c	Added type hints to usb_hid	2020-07-03 11:38:02 -04:00
dherrada	0a657091c6	Added type hints to touchio	2020-07-03 11:34:45 -04:00
dherrada	f8229372bd	Added type hints to terminalio	2020-07-03 11:31:57 -04:00
dherrada	6e4c76a926	Added type hints to _stage	2020-07-03 11:26:48 -04:00
dherrada	9116470fd7	Added type hints to socket	2020-07-03 11:24:53 -04:00
dherrada	71ec419da6	Added type hints to sdioio	2020-07-03 11:16:41 -04:00
dherrada	48443ce02b	Added type hints to sdcardio	2020-07-03 11:15:22 -04:00
dherrada	d9a98bd05c	Added type hints to rotaryio	2020-07-03 11:13:16 -04:00
dherrada	c8437e6595	Added type hints to rgbmatrix	2020-07-03 11:10:13 -04:00
dherrada	93d20077cc	Added type hints to pulseio	2020-07-03 11:04:03 -04:00
dherrada	a2c7e2795b	Added type hints to ps2io	2020-07-03 10:51:39 -04:00
dherrada	41f12a7a6c	Added type hints to pixelbuf	2020-07-03 10:47:44 -04:00
dherrada	e273b9a11f	Added type hints to _pew	2020-07-03 10:42:57 -04:00
dherrada	0abf45a446	Added type hints to nvm	2020-07-03 10:37:55 -04:00
dherrada	0a8d9eed45	Added type hints to microcontroller	2020-07-03 10:33:28 -04:00
dherrada	2e8b8c7b95	Added type hints to i2cperipheral	2020-07-03 10:29:39 -04:00
dherrada	6a3968d805	Added type hints to gnss	2020-07-03 10:26:31 -04:00
dherrada	d73348f673	Added type hints to gamepadshift	2020-07-03 10:19:34 -04:00
dherrada	ff8604bb82	Added type hints to gamepad	2020-07-03 10:17:35 -04:00
dherrada	51841447be	Added type hints to frequencyio	2020-07-03 10:14:40 -04:00
dherrada	ca0e8ea1eb	Added type hints to framebufferio	2020-07-03 10:12:04 -04:00
dherrada	48ea2271b7	Added type hints to fontio	2020-07-03 10:08:25 -04:00
dherrada	783cc4de39	Added type hints to displayio	2020-07-03 10:05:14 -04:00
Scott Shawcroft	70fdde4aaa	Remove trailing space	2020-07-02 15:11:40 -07:00
dherrada	9b4ffc0571	Changed unions to ReadableBuffer and WriteableBuffer	2020-07-02 17:47:52 -04:00
Scott Shawcroft	c33542f978	Merge branch 'main' into patch-1	2020-07-02 13:56:09 -07:00
dherrada	dd27fdfbe3	Added type hints to countio	2020-07-02 14:15:43 -04:00
dherrada	51fd286cbf	Added type hints to board	2020-07-02 14:14:05 -04:00
dherrada	26f1fd0071	Added type hints to _bleio	2020-07-02 14:11:25 -04:00
dherrada	54cb1feea0	Removed all 'self, )'	2020-07-02 13:28:36 -04:00
dherrada	522b17ca93	Made suggested changes	2020-07-02 13:25:07 -04:00
dherrada	ac113fdc81	Changed bytearray to a union	2020-07-02 12:39:17 -04:00
dherrada	ffc5f0c338	Added type hints to bitbangio	2020-07-02 12:37:03 -04:00
dherrada	ed476a417c	Added type hints to audiopwmio	2020-07-02 12:07:03 -04:00
dherrada	e114b31a7a	Added type hints to audiomp3	2020-07-02 12:02:21 -04:00
dherrada	24bca06db0	Added type hints to audiomixer	2020-07-02 12:02:13 -04:00
dherrada	3d1e0051e6	Added type hints to audioio	2020-07-02 12:02:07 -04:00
dherrada	b26ee6c1f6	Added type hints to audiocore	2020-07-02 12:02:02 -04:00
dherrada	2681bd52b5	Did audiobusio	2020-07-02 11:33:18 -04:00
dherrada	627ecadb3f	Did aesio	2020-07-02 11:10:53 -04:00
dherrada	cb259de5ef	Did busio, fixed up analogio	2020-07-02 10:23:17 -04:00
dherrada	6fd6747e9e	Added type hints for analogio	2020-07-02 09:36:22 -04:00
Jeff Epler	fcddfd0f39	Merge pull request #3083 from tannewt/esp32s2_busio Add busio support for the ESP32-S2	2020-07-01 21:02:08 -05:00
Jeff Epler	e33accae4d	ulab: document sosfilt	2020-07-01 10:15:09 -05:00
Dan Halbert	11cb3e3b4b	hci skeleton done; not working yet	2020-06-30 23:19:40 -04:00
Dan Halbert	f879114c43	do HCI pin init in Python, not here	2020-06-26 19:27:05 -04:00
Dan Halbert	1bc2e979eb	wip; compiles; much commented out	2020-06-26 17:23:20 -04:00
Jeff Epler	472a04ba4b	sdioio: Remove junk in comments	2020-06-26 13:17:00 -05:00
Jeff Epler	0f2fb93d14	Update shared-bindings/sdcardio/SDCard.c Co-authored-by: Scott Shawcroft <scott@tannewt.org>	2020-06-26 13:15:30 -05:00
Jeff Epler	05837b2841	sdioio: Add shared-bindings There is no implementation yet.	2020-06-26 11:50:25 -05:00
Jeff Epler	159728b550	shared-bindings: Factor out validate_list_is_free_pins This will ultimately be used by SDIO, where a variable length list of data lines is called for.	2020-06-26 11:50:24 -05:00
Jeff Epler	57fde2e07b	sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.	2020-06-26 11:50:23 -05:00
Dan Halbert	759929c24a	hci early wip; refactor supervisor bluetooth.c for nrf: tested	2020-06-25 20:57:17 -04:00
Jeff Epler	1d2cc0b968	I2CPeripheral: Rename class and its module This is an incompatible change.	2020-06-25 11:44:19 -05:00
Jeff Epler	9110e36636	Use main/selected terminology in docstrings Also copy some notes from busio docstrings to bitbangio docstrings	2020-06-25 11:42:23 -05:00
Scott Shawcroft	c5fa9730a8	Compiles!	2020-06-24 12:47:59 -07:00
Scott Shawcroft	a26102607e	Add UART support	2020-06-24 12:47:58 -07:00
Kamil Tomaszewski	ab4c09cea7	gnss: Add timestamp	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	3509dad5b3	gnss: Remove start and stop	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	c49f4bcc85	gnss: add a comment about the units	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	84f424f631	gnss: Implement new library for GNSS	2020-06-24 11:14:44 +02:00
Jeff Epler	a580f0f1c4	_pew: move to common-hal I noticed that this code was referring to samd-specific functionality, and isn't enabled except in one samd board (pewpew10). Move it. There is incomplte support for _pew in mimxrt10xx which then caused build errors; adding a #if guard to check for _pew being enabled fixes it. The _pew module is not likely to be important on mimxrt but I'll leave the choice to remove it to someone else.	2020-06-22 10:45:27 -05:00
Jeff Epler	32a29ffdff	shared-bindings: Change docstrings with '\x...' chars to raw strings Closes: #3032	2020-06-14 13:05:08 -05:00
Jeff Epler	3c3cad5ae6	docs: Improve 5.0.x <-> main branch doc linkrot This improves, but does not entirely fix, the broken links that result from the autoapi change. It fixes module-level links, but class links still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x) is now just /shared-bindings/displayio/#displayio.Palette).	2020-06-14 11:12:35 -05:00
Diego Elio Pettenò	dd5d7c86d2	Fix up end of file and trailing whitespace. This can be enforced by pre-commit, but correct it separately to make it easier to review.	2020-06-03 10:56:35 +01:00
Scott Shawcroft	959f7297da	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-06-01 17:01:16 -07:00
Scott Shawcroft	a170c5e13a	Merge branch 'master' into update-ulab	2020-06-01 15:19:21 -07:00
Scott Shawcroft	323cca8910	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-06-01 15:18:12 -07:00
Jeff Epler	8af77cb91f	ulab: docs: Fix markup error	2020-06-01 11:02:51 -05:00
Jeff Epler	5061405eb3	fix spelling	2020-06-01 09:16:55 -05:00
Jeff Epler	18c659780e	ulab: update .. add new modules and functions to our shared-bindings stubs	2020-06-01 09:02:29 -05:00
Jeff Epler	89bd87d9fc	shared-bindings: Fix docs of storage.VfsFat This is almost, but not entirely, a whitespace change. "..." was missing or mis-placed in several places The invalid syntax 'def f(self, ):' was used in several places.	2020-05-31 10:35:42 -05:00
Scott Shawcroft	2fd7a43f2f	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-05-29 10:16:24 -07:00
Jeff Epler	90571e7b7f	Various doc examples: Fix the "/ 18" copypasta bug	2020-05-27 16:43:35 -05:00
Scott Shawcroft	1ed4978620	Remove NONE from mode enum and doc tweaks	2020-05-27 10:58:21 -07:00
Sean Cross	aac5a4f178	watchdog: use common_hal_watchdog_* pattern This pulls all common functionality into `shared-bindings` and keeps platform-specific code inside `nrf`. Additionally, this performs most validation in the `shared-bindings` site. The only validation that occurs inside platform-specific `common-hal` code is related to timeout limits that are platform-specific. Additionally, all documentation is now inside the `shared-bindings` directory. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:38:29 +08:00
Sean Cross	dbf1bef56a	watchdog: support catching the timeout With this patch, the exception can now be caught: import microcontroller import watchdog import time wdt = microcontroller.watchdog wdt.timeout = 5 while True: wdt.mode = watchdog.WatchDogMode.RAISE print("Starting loop -- should exit after five seconds") try: while True: time.sleep(10) # pass # This also works for a spinloop except watchdog.WatchDogTimeout as e: print("Watchdog Expired (PASS)") except Exception as e: print("Other exception (FAIL)") print("Exited loop") This prints: Starting loop -- should exit after five seconds Watchdog Expired (PASS) Starting loop -- should exit after five seconds Watchdog Expired (PASS) Starting loop -- should exit after five seconds Watchdog Expired (PASS) Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:50 +08:00
Sean Cross	c7efc94a33	watchdog: move timeout exception to shared-bindings Make this exception globally available to all platforms that have enabled the watchdog timer. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	08362c9cab	watchdogtimer: refactor to new api This refactors the WatchDogTimer API to use the format proposed in https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632268227 Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	87737fb50a	watchdog: fix documentation build error Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	595f6387c2	watchdog: rename module from `wdt` and move to `microcontroller` This also places it under the `microcontroller` object. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	f4719609f7	wdt: add watchdog support This adds shared bindings for a watchdog timer, based on the API provided by micropython. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:48 +08:00
Dan Halbert	3574670226	Merge pull request #2931 from tannewt/esp32s2_digitalio Finish digitalio and pin use tracking for ESP32S2	2020-05-26 19:18:45 -04:00
Scott Shawcroft	2ffd70417d	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-26 13:09:57 -07:00
Roy Hooper	d13d0244ec	Adjust docs to reflect behaviour.	2020-05-24 20:39:53 -04:00
George Waters	c592a2b4db	Simplify pixelbuf set_pixels function	2020-05-22 21:19:17 -04:00
George Waters	f078055f59	Use mp_int_t for setting pixelbuf slice indices When handling negative steps, start and stop need to be mp_int_t so they can be checked against a potential negative value during the for loop used to set the slice values.	2020-05-22 16:28:09 -04:00
George Waters	16ffc731f3	Implement negative step for pixelbuf slices	2020-05-21 21:57:45 -04:00
Scott Shawcroft	3bb6a32a20	Merge branch 'master' into esp32s2_digitalio	2020-05-21 08:52:39 -07:00
George Waters	02d0881fca	Fix error when getting a pixelbuf slice	2020-05-20 17:56:08 -04:00
Scott Shawcroft	ba724fffb4	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-20 10:48:27 -07:00
Scott Shawcroft	49090d1378	Fully implement digitalio and pin-in-use tracking. Fixes #2901	2020-05-19 17:46:29 -07:00
Sean Cross	34f91f01c6	bleio: adapter: add advertising timeout and status Add a field to allow specifying a timeout when initiating advertising. As part of this, add a new property to determine if the device is still advertising. Additionally, have the `anonymous` property require a timeout, and set the timeout to the maximum possible value if no timeout is specified. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 15:01:19 +08:00
Sean Cross	cfe65742a3	_bleio: support anonymous advertising Add a new parameter to the `start_advertising()` function to enable anonymous advertising. This forces a call to `sd_ble_gap_privacy_set()` with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and `private_addr_type` set to `BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`. With this, addresses will cycle at a predefined rate (currently once every 15 minutes). Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 15:01:18 +08:00
Scott Shawcroft	2c2b53303d	Merge pull request #2837 from k0d/serial-debug Add support for a debug console, such as ST-Link VCP.	2020-05-18 18:13:31 -07:00
Mark Olsson	007c92ee6a	Enable showing the console on a debug uart	2020-05-19 02:02:52 +02:00
warriorofwire	dde66cadde	remove a duplication in polygon.c	2020-05-18 13:32:06 -07:00
warriorofwire	4bbb80e31a	vectorio: speed up polygon This change takes polygon from 126k pixels per second fill to 240k pps fill on a reference 5 point star 50x66px polygon, updating both location and shape at 10hz. Tested on an m4 express feather. As a curiosity, the flat-out fill rate of a shape whose get_pixel is `return 0;` fills just shy of 375k pixels per second.	2020-05-18 13:32:06 -07:00
ppolk-nocimed	c6406c74ec	Added DigitalInOut suggestion	2020-05-16 13:21:34 -07:00
ppolk-nocimed	f76ff1eb69	Fixed Optional[Pull]	2020-05-16 13:14:50 -07:00
ppolk-nocimed	db924fb01e	Digital In Out Type Hints	2020-05-16 12:47:49 -07:00
Thea Flowers	7d167560af	Note that nvm.ByteArray is available at microcontroller.nvm Fixes #2766	2020-05-15 14:53:14 -07:00
Scott Shawcroft	0d8bca92e2	Merge pull request #2810 from dherrada/master Pyi integration	2020-05-15 10:31:05 -07:00
Sean Cross	f9ed3acf6d	aesio: specify writable buffers for destination buffers When calling `AES.decrypt_into()` or `AES.encrypt_into()`, the destination buffers may be any buffer kind. However, we currently aren't checking to make sure the destination buffer is actually writable. Specify `MP_BUFFER_WRITE` for the destination buffers of both of these objects so we don't inadvertently write to immutable data. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-15 10:22:42 +08:00
Sean Cross	aba36e4abf	aesio: use bufinfo rather than mp_str_bytes In order to accept both `bytes` objects and `bytearray` objects, use a `bufinfo` construct to retrieve the data rather than `mp_obj_str_get_data()`. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-15 10:16:00 +08:00
Scott Shawcroft	15c2d16bf9	Fix help doc	2020-05-14 16:06:13 -07:00
Scott Shawcroft	afc84c2fd1	Fix ulab, math and template.	2020-05-14 15:58:36 -07:00
dherrada	b477c4812d	Fixed minor indentation issue	2020-05-14 16:58:25 -04:00
Scott Shawcroft	db4dbe0752	Merge pull request #2889 from jepler/gamepad-tick Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick	2020-05-13 11:53:23 -07:00
Scott Shawcroft	3ffa5604fc	Update countio to python stub docs	2020-05-13 08:36:16 -07:00
Scott Shawcroft	7546d47f77	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-13 08:23:55 -07:00
Jeff Epler	23ba58bbf5	Gamepad & GamepadShift: Initially allocate as long-lived This makes less heap churn and decreases code size a tiny bit	2020-05-13 10:14:37 -05:00
Jeff Epler	fbf052bb27	Gamepad & GamepadShift: Enable ticks while object exists Otherwise, button presses might not be noticed.	2020-05-13 10:14:37 -05:00
Scott Shawcroft	4e646ee6e4	Move vectorio to stubs	2020-05-12 18:40:02 -07:00
Scott Shawcroft	cde6651721	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-12 18:23:59 -07:00
Scott Shawcroft	277e8d528b	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 18:22:57 -07:00
Scott Shawcroft	4e8de3c554	Swap sphinx to autoapi and the inline stubs	2020-05-12 17:28:24 -07:00
Scott Shawcroft	d274074f01	Merge remote-tracking branch 'adafruit/master' into vectorio	2020-05-12 12:29:05 -07:00
Scott Shawcroft	bc40034a08	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 12:12:51 -07:00
Scott Shawcroft	a1091bbfbb	Merge pull request #2871 from DavePutz/Issue2812 Throw a NotImplementedError for time functions on boards without long ints	2020-05-12 11:40:49 -07:00
dherrada	c534a872a2	Merge branch 'master' into master	2020-05-12 12:26:02 -04:00
dherrada	6490137812	Did usb_hid, usb_midi, ustack, wiznet	2020-05-12 12:08:46 -04:00
dherrada	e4589543fb	Did time, touchio, uheap	2020-05-12 11:43:24 -04:00
dherrada	991045b9ce	Did struct, supervisor, terminalio	2020-05-12 11:28:33 -04:00
Daniel Pollard	22bf99ccc4	Fixed underline in documentation	2020-05-12 14:52:48 +10:00
Daniel Pollard	ee2cb703c8	merged master	2020-05-12 14:41:28 +10:00
warriorofwire	78444a1018	fix VectorShape on_dirty callback registration being set for the wrong type	2020-05-11 21:21:05 -07:00
warriorofwire	040beb0577	Clean up circle documentation	2020-05-11 21:15:40 -07:00
DavePutz	4712f9f104	Merge branch 'master' into Issue2812	2020-05-11 21:48:54 -05:00
Scott Shawcroft	1b0c52c8ca	Merge pull request #2877 from rhooper/pixelbuf-doc-fix Pixelbuf doc fix	2020-05-11 15:42:33 -07:00
dherrada	603df58f97	Did stage, socket, storage	2020-05-11 13:40:02 -04:00
dherrada	c7a9d49cba	Did rgbmatrix, rotaryio, and RTC	2020-05-11 13:00:19 -04:00
dherrada	838b6c5685	Did ps2io, pulseio, random	2020-05-11 10:48:11 -04:00
warriorofwire	eb3d5fa453	ujson: do not eat trailing whitespace Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers. When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout. Fixes: - Waiting for a timeout after you have completed reading a correct and complete JSON off the input. - Raising an OSError after reading a correct and complete JSON off the input. - Eating more data than semantically owned off the input buffer. - Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object. Code you would write before: ``` line = board_busio_uart_port.read_line() json_dict = json.loads(line) ``` or reaching for fixed buffers and swapping them around in Python. Code that did not work before that does now: ``` json_dict = json.load(board_busio_uart_port) ``` - This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs. - It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA. - It simplifies code that users write while improving their apps.	2020-05-10 20:45:42 -07:00
Roy Hooper	09fedb3fd5	fix another doc error (pixelsx - thanks @theacodes)	2020-05-10 21:35:37 -04:00
Roy Hooper	70f2ef3f8e	Fix docs some more	2020-05-10 19:50:10 -04:00
Roy Hooper	2f7c0ec8e4	Minor fixes to _pixelbuf.PixelBuf docs	2020-05-10 16:22:01 -04:00
warriorofwire	4086600b61	vectorio: switch per-shape transform to Display Rather than maintain a transform per-shape, we'll just use whatever settings are on the Display. Currently only transpose is done.	2020-05-09 22:15:51 -07:00
warriorofwire	206d0e598a	Add vectorio: for drawing shapes vectorio builds on m4 express feather Concrete shapes are composed into a VectorShape which is put into a displayio Group for display. VectorShape provides transpose and x/y positioning for shape implementations. Included Shapes: * Circle - A radius; Circle is positioned at its axis in the VectorShape. - You can freely modify the radius to grow and shrink the circle in-place. * Polygon - An ordered list of points. - Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last point and the first point. - You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape x and y properties will position the rectangle relative to its top center point * Rectangle A width and a height.	2020-05-09 15:38:22 -07:00
DavePutz	e7fc806034	Throw a NotImplementedError for time functions on boards without long ints Fix for Issue #2812. Instead of reporting a missing attribute for functions such as time.time() and time.mktime(); platforms that do not have long integer support will raise a NotImplementedError	2020-05-08 16:33:26 -05:00
dherrada	09530e5dc3	Did os, _pixelbuf, _pew	2020-05-08 16:03:39 -04:00
Kattni Rembor	a83d1d7b4b	Update wheel to colorwheel and fix RGB order.	2020-05-08 14:44:41 -04:00
Kattni Rembor	37e5ff7757	Update colorwheel from GRB to RGB.	2020-05-08 13:25:52 -04:00
dherrada	d750096bef	Did neopixel, network, nvm	2020-05-07 18:40:46 -04:00
dherrada	e31e9eeaa1	Did math, microcontroller, and multiterminal	2020-05-07 15:59:52 -04:00
dherrada	4f33a20d17	Added gamepad, gamepadshift, and i2cslave	2020-05-07 15:10:44 -04:00
dherrada	a3d5adb43c	Did _eve, fontio, framebufferio, and frequencyio	2020-05-07 11:56:46 -04:00
dherrada	2ebe3035df	Did board, digitalio, displayio	2020-05-07 10:54:09 -04:00
Daniel Pollard	84c806a4be	updated descriptions and build variable	2020-05-07 12:42:46 +10:00
spkuehl	af55af216a	Fix type in RTC documentation.	2020-05-06 14:11:11 -05:00
Sean Cross	b168784fa0	aesio: add basic AES encryption and decryption This adds initial support for an AES module named aesio. This implementation supports only a subset of AES modes, namely ECB, CBC, and CTR modes. Example usage: ``` >>> import aesio >>> >>> key = b'Sixteen byte key' >>> cipher = aesio.AES(key, aesio.MODE_ECB) >>> output = bytearray(16) >>> cipher.encrypt_into(b'Circuit Python!!', output) >>> output bytearray(b'E\x14\x85\x18\x9a\x9c\r\x95>\xa7kV\xa2`\x8b\n') >>> ``` This key is 16-bytes, so it uses AES128. If your key is 24- or 32- bytes long, it will switch to AES192 or AES256 respectively. This has been tested with many of the official NIST test vectors, such as those used in `pycryptodome` at `39626a5b01/lib/Crypto/SelfTest/Cipher/test_vectors/AES` CTR has not been tested as NIST does not provide test vectors for it. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-06 17:40:06 +08:00
Daniel Pollard	8961dd9fe7	changed build variables as per advice	2020-05-06 09:05:14 +10:00
Daniel Pollard	bfa5cd9c13	refactor countio based on feedback	2020-05-05 15:23:38 +10:00
Dan Halbert	e1366d78b1	trivial change to force rebuild	2020-05-04 23:05:47 -04:00
Dan Halbert	b7836aeac6	address review comments	2020-05-04 19:51:08 -04:00
Dan Halbert	bae7a5e433	make translate again	2020-05-04 17:26:59 -04:00
Dan Halbert	d6c6f9f4f0	add PacketBuffer .incoming_ and .outgoing_packet_length	2020-05-04 15:59:45 -04:00
dherrada	0e465e63b9	Did audiopwmio, bitbangio, and _bleio	2020-05-01 18:23:27 -04:00
Scott Shawcroft	242063e1d0	Merge pull request #2838 from spkuehl/UART_sharedbinding_fix Fix #2814 Corrected UART output.	2020-05-01 11:05:24 -07:00
spkuehl	a3a2dd0f70	Corrected UART output.	2020-04-30 19:14:51 -05:00
dherrada	d65e851044	Did audioio, audiomixer, audiomp3	2020-04-30 13:06:09 -04:00
Dan Halbert	46298ddcb4	PacketBuffer doc fixes	2020-04-30 00:36:01 -04:00
Dan Halbert	f3078511a6	further cleanup and bug fixing	2020-04-29 23:18:08 -04:00
Dan Halbert	180f5c6a94	Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes	2020-04-29 22:11:22 -04:00
Dan Halbert	3d62f87e29	back to '.packet_size' for compatiblity	2020-04-29 22:10:56 -04:00
Dan Halbert	84cee1ab8d	rename and improve PacketBuffer packet length property	2020-04-29 17:49:31 -04:00
dherrada	7ff9b9bc80	Did first 3	2020-04-29 17:36:28 -04:00
dherrada	a2a32fea1a	Added newlines after every ellipsis	2020-04-29 15:55:06 -04:00
dherrada	093461e816	Fixed indentation	2020-04-29 15:45:19 -04:00
dherrada	deccdcc1d6	Did the same for the rest of busio	2020-04-29 15:20:05 -04:00
dherrada	93d1e53c66	Hopefully fixed whitespace issues	2020-04-29 14:19:04 -04:00
dherrada	c7b721f4f1	Fixed some more whitespace	2020-04-28 19:22:03 -04:00
dherrada	aacca61598	Fixed whitespace on audiocore	2020-04-28 18:56:19 -04:00
dherrada	c3897d0add	Fixed whitespace in analogio	2020-04-28 18:43:40 -04:00
dherrada	724dcda3ec	Fixed whitespace in busio	2020-04-28 18:39:58 -04:00
Scott Shawcroft	755d404edf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-27 16:45:10 -07:00
dherrada	829da5c127	Added inline pyi to audiomp3	2020-04-27 17:29:50 -04:00
dherrada	8330471068	Added inline pyi to audiomixer	2020-04-27 17:20:40 -04:00
dherrada	1363e6e724	Added inline pyi to audiocore	2020-04-27 17:02:48 -04:00
dherrada	088b5b1785	Added inline pyi to audiocore	2020-04-27 16:49:12 -04:00
dherrada	e96235d0cf	Added inline pyi to audiobusio	2020-04-27 16:35:03 -04:00
dherrada	8344fce994	Added inline pyi to analogio	2020-04-27 13:06:47 -04:00
dherrada	27e085ec36	Added pyi to OneWire.c	2020-04-25 15:36:16 -04:00
dherrada	e7874277ab	Fixed empty lines	2020-04-25 15:35:24 -04:00
dherrada	7070fe1995	Added inline pyi to UART.c	2020-04-25 15:25:31 -04:00
dherrada	28430a9919	Added inline pyi to I2C.c	2020-04-25 15:07:58 -04:00
dherrada	55bdee688f	Reorganized pyi again	2020-04-23 16:14:17 -04:00
dherrada	855c2033b5	Reogranized pyi in spi.c	2020-04-23 15:35:20 -04:00
dherrada	a18b991ca9	Added pyi to SPI.c	2020-04-22 15:22:34 -04:00
Jeff Epler	b87af3b071	ulab: Update from upstream Closes: #2787	2020-04-22 09:04:12 -05:00
Dan Halbert	77cd93ac2d	merge from adafruit	2020-04-21 17:47:51 -04:00
Dan Halbert	38ec3bc574	further ringbuf cleanup	2020-04-21 17:38:20 -04:00
Jeff Epler	507e17fbf1	displayio: Fix "bus type" problem introduced at `8cba145c90` When allocate_display_bus_or_raise was factored out, the assignment of the bus's Python type was lost. Restore it. This would have affected displays of any type other than RGBMatrix, when they were created dynamically. Boards with displays configured in flash were unaffected. Closes: #2792	2020-04-21 13:48:34 -05:00
Scott Shawcroft	bebf27e733	Merge remote-tracking branch 'adafruit/master' into lower_power This isn't perfect and needs a bit more testing.	2020-04-20 18:25:13 -07:00
Jeff Epler	898c09c35e	RGBMatrix: nonessential change to kick Actions	2020-04-19 09:10:08 -05:00
Jeff Epler	9bfe6b7197	framebufferio: update copyright information	2020-04-17 18:44:07 -05:00
Jeff Epler	8c455f24bf	RGBMatrix: this comment no longer describes the code ... allocate_display_bus_or_raise() uses fixed storage, not heap storage.	2020-04-17 18:44:07 -05:00
Jeff Epler	37cb6bafa8	RGBMatrix: documentation got behind the code	2020-04-17 18:44:07 -05:00
Jeff Epler	5fcc6d6286	RGBMatrix: finish renaming from Protomatter This gets all the purely internal references. Some uses of protomatter/Protomatter/PROTOMATTER remain, as they are references to symbols in the Protomatter C library itself.	2020-04-17 18:44:07 -05:00
Jeff Epler	1b478bbae6	RGBMatrix: remove unneeded properties	2020-04-17 18:43:57 -05:00
Jeff Epler	57ce2d1f41	framebufferio: get width, etc., from protocol, not object property	2020-04-17 18:43:57 -05:00
Jeff Epler	3d6258f63d	Rename Protomatter -> RGBMatrix This is a quick rename, it changes the user-facing names but not the internal names of things.	2020-04-17 18:43:57 -05:00
Jeff Epler	64c3968a2e	protomatter: move get_width/height to common_hal	2020-04-17 18:43:57 -05:00
Jeff Epler	545b6e560a	fix doc build	2020-04-17 18:43:57 -05:00
Jeff Epler	1a91a75b9c	framebufferio: get more properties direct from underlying framebuffer	2020-04-17 18:43:57 -05:00
Jeff Epler	a32337718d	Rename _protomatter -> protomatter I originally believed that there would be a wrapper library around it, like with _pixelbuf; but this proves not to be the case, as there's too little for the library to do.	2020-04-17 18:43:57 -05:00
Jeff Epler	d1ff23e004	framebufferio: get width, height from framebuffer properties	2020-04-17 18:43:57 -05:00
Jeff Epler	d2aac7a754	Protomatter: add width, height properties	2020-04-17 18:43:57 -05:00
AndrewR-L	f572b72306	busio/UART: Correct and clarify readline() return. Surely readline() "rtype" is string not int as stated (and not bytes as some might expect). Also it is not totally unambiguous what happens on a timeout so it would help to clarify in docs that on a timeout it does NOT return with what it has read so far, rather it leaves all that in the buffer ready for a future read and returns nothing. Likewise clarify that if timeout=0 but there is no newline it DOES return what it has read so far (NOT None). At least this is what I think it does and/or is supposed to do! Python docs are generally not too explicit about what is the proper treatment, so perhaps all the more reason to clarify the interpretation adopted?	2020-04-17 15:10:36 +01:00
Scott Shawcroft	b580b34cbf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-14 17:14:44 -07:00
Jeff Epler	0ce9c008c5	Protomatter: Make all arguments kw-only, add rgb count and optional height checking They're not readily distinguishable by type. I also added the requested height optional parameter; this is checked against the computed one. It's not feasible to use this parameter to artificailly reduce the number of used rows, because changes in the underlying C protomatter library would be required. Finally, I added a better error message when the number of RGB pins was not what was expected.	2020-04-14 18:24:59 -05:00
Jeff Epler	880fff80e9	protomatter: Respond to review comments - rename oe_pin -> output_enable_pin - improve and reorganize docstrings - rename swapbuffers->refresh - rename "paused" -> "brightness", change semantics slightly - common_hal several functions - clarify why the common_hal routines can't be used directly in the protocol's function pointers - whitespace cleanups - remove prototypes for nonexistent functions	2020-04-14 18:24:59 -05:00
Jeff Epler	5d328c3b44	protomatter: clarify by comment why these functions exist	2020-04-14 18:24:58 -05:00
Jeff Epler	ba20bc8b43	framebufferio: move backlight down to the underlying framebuffer	2020-04-14 18:24:58 -05:00
Jeff Epler	129c6369cf	protomatter: code style	2020-04-14 18:24:58 -05:00
Jeff Epler	4a05e938ed	protomatter: validate pins to give better error message The numbered error from the underlying library is not helpful for beginning users	2020-04-14 18:24:58 -05:00
Jeff Epler	9019710a1e	protomatter: improve an error message	2020-04-14 18:24:58 -05:00
Jeff Epler	baf04b7738	FramebufferDisplay: remove probably not needed constructor arguments	2020-04-14 18:24:58 -05:00
Jeff Epler	50219862e1	protomatter: make docstring match implementation	2020-04-14 18:24:58 -05:00
Jeff Epler	a663a7dd30	_protomatter: move get/set paused into shared-module	2020-04-14 18:24:58 -05:00
Jeff Epler	5fcba97a51	Make function name more descriptive	2020-04-14 18:24:58 -05:00
Jeff Epler	89eb45a13c	use floor division in docstring Co-Authored-By: Scott Shawcroft <scott@tannewt.org>	2020-04-14 18:24:58 -05:00
Jeff Epler	09dc46a984	Add Protomatter and FramebufferDisplay	2020-04-14 18:24:54 -05:00
Jeff Epler	8cba145c90	displayio: implement, use allocate_new_display_bus_or_raise	2020-04-14 18:24:54 -05:00
Jeff Epler	6378d600c4	displayio: implement, use allocate_display_or_raise	2020-04-14 18:24:54 -05:00
Scott Shawcroft	ada102dd98	Merge pull request #2767 from jepler/update-ulab ulab: Get updates from upstream	2020-04-14 15:59:33 -07:00
Scott Shawcroft	e063b066f0	Merge pull request #2756 from caternuson/bitmap_fill Add fill method to displayio.Bitmap	2020-04-14 12:54:44 -07:00
Jeff Epler	693928d201	doc updates	2020-04-13 20:10:02 -05:00
caternuson	dc75746842	add docstring, clean up	2020-04-09 08:59:26 -07:00
caternuson	49fff2d9b4	initial working fill	2020-04-09 08:43:50 -07:00
sommersoft	61bab8e62e	ulab/__init__.rst: fix attribute name; uint8 -> uint16	2020-04-09 08:45:26 -05:00
Scott Shawcroft	317b96e93a	Fix iMX builds	2020-03-31 17:00:30 -07:00
Scott Shawcroft	cbe9512691	Merge pull request #2741 from tannewt/fix_packetbuffer_server Fix PacketBuffer server support	2020-03-31 13:39:34 -07:00
Jeff Epler	54e8c63b4f	Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity Add polarity and phase to FourWire.	2020-03-28 07:28:37 -05:00
Scott Shawcroft	a870908718	Don't break the function signature	2020-03-26 14:11:20 -07:00
siddacious	9e0c00dfd4	adding a backlight polarity flag to Display	2020-03-25 22:51:20 -07:00
Scott Shawcroft	8a5d3cd6c4	Add exception on small buffer and fix Connecion WRITE handling	2020-03-25 17:41:47 -07:00
Scott Shawcroft	6b7acc65b6	Add polarity and phase to FourWire. It was fixed as 0/0 even though it used to get it from the current SPI state. This makes it more explicit with kwargs. Thanks to magpie_lark and kmatocha on the Adafruit Support forum for finding the issue: https://forums.adafruit.com/viewtopic.php?f=60&t=162515	2020-03-25 11:22:46 -07:00
Jeff Epler	aaf07ce72f	Update shared-bindings/ulab/__init__.rst Co-Authored-By: Scott Shawcroft <scott@tannewt.org>	2020-03-17 16:37:16 -05:00
Jeff Epler	aa54a7e76e	ulab: update documentation	2020-03-17 09:25:33 -05:00
Dale Hawkins	8ae103e07c	Fix documentation typo: tm_minute should be tm_min	2020-03-16 09:07:10 -06:00
Dan Halbert	fdcdc1320b	Make ParallelBus reset ping arg required	2020-03-06 14:30:30 -05:00
Dan Halbert	210c3274e5	Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup	2020-03-05 17:47:01 -05:00
Dan Halbert	817b5be320	rename routines to be clearer; fix wiznet arg types	2020-03-05 16:35:31 -05:00
Dan Halbert	e30b1d3121	missing semicolon	2020-02-29 22:48:11 -05:00
Dan Halbert	8435935429	update uses of assert_pin_free; remove redundant checks	2020-02-29 15:37:32 -05:00
Dan Halbert	b6206406de	new pin validation routines; don't use mp_const_none if NULL will do	2020-02-28 23:43:04 -05:00
Jeff Epler	39cfe32c34	Update ulab from upstream again	2020-02-27 14:14:05 -06:00
Jeff Epler	645df931ae	typos	2020-02-27 11:07:37 -06:00
Jeff Epler	fa3b9eba92	ulab: Incorporate it	2020-02-27 11:03:03 -06:00
Dan Halbert	e31ac710be	Enable _bleio adapter when _bleio is imported	2020-02-20 21:55:04 -05:00
Dave Marples	d388899985	Addition of RS485 support	2020-02-18 23:16:40 +00:00
Dave Marples	84ad3d8393	Addition of RTS/CTS/RS485 UART functionality	2020-02-18 23:16:40 +00:00
Scott Shawcroft	52d96ca151	Merge pull request #2626 from dhalbert/stat-for-shortint avoid os.stat() int overflow on smallint-only builds	2020-02-18 13:40:52 -08:00
Dan Halbert	e0753c4ad2	avoid os.stat() int overflow on smallint-only builds	2020-02-14 18:33:37 -05:00
Melissa LeBlanc-Williams	33774e790c	Updated OnDiskBitmap RTD example for 5.x	2020-02-14 10:23:23 -08:00
Scott Shawcroft	e97b0cfc61	Merge pull request #2581 from jamesbowman/master First draft of eveL, the low-level module of the Gameduino bindings	2020-02-13 11:21:32 -08:00
James Bowman	b02937d1a7	Split ROMDECLS for readability	2020-02-13 07:28:21 -08:00
Dan Halbert	c57ccd5eb4	doc typo	2020-02-11 20:03:47 -05:00
Dan Halbert	f73b58a2c6	fix doc indentation	2020-02-11 19:57:48 -05:00
Dan Halbert	2e029d55fc	nrf: add SPIM3 support	2020-02-11 19:22:14 -05:00
James Bowman	a87dee2f66	Correct the BitmapTransform operations. Correct argument order better argument naming fix copypaste bug on C and F arguments	2020-02-10 19:34:38 -08:00
James Bowman	1f44029c56	Remove unused code	2020-02-10 18:57:04 -08:00
James Bowman	f101ff60c5	Move _eve module declarations into shared-bindings header	2020-02-07 17:10:19 -08:00
James Bowman	c631b4d60e	Add doc strings, inline mod_eve-gen.h and remove it	2020-02-07 16:44:48 -08:00
James Bowman	5c6d94d3e5	Split into shared-module and shared-bindings	2020-02-07 10:30:49 -08:00
Dan Halbert	cbd519bfa6	time.sleep() rounds to nearest msec	2020-02-07 10:24:11 -05:00
Dan Halbert	857d8ab40a	improve time.monotonic_ns() accuracy from ms to us	2020-02-07 10:02:50 -05:00
James Bowman	a20490c0b3	Add method VertexFormat() and variable fixed-point scaling in Vertex2f()	2020-02-06 08:49:07 -08:00
James Bowman	acef93a253	Rename eveL to _eve, EVEL to _EVE	2020-02-05 18:17:58 -08:00
James Bowman	a9b34f45dc	My name	2020-02-05 18:01:25 -08:00
James Bowman	53f7e2be4f	Use mp_instance_cast_to_native_base() throughout	2020-02-05 17:58:59 -08:00
Dan Halbert	a4ebd2f7c1	allow tuple or list for Palette color	2020-02-03 22:09:53 -05:00
James Bowman	0bcfabbc87	Add header for module eveL explaining what it is. Exclude modeveL-gen.h from Sphinx build	2020-02-03 18:41:32 -08:00
James Bowman	7fd30e7d20	First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. [adafruit/circuitpython#2578]	2020-02-03 16:46:14 -08:00
Scott Shawcroft	55eb1730b8	Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf	2020-01-30 10:59:21 -08:00
Radomir Dopieralski	27c36eea2b	circuitpython-stage: allow choosing background color	2020-01-30 15:24:04 +01:00
Scott Shawcroft	5d24ade5c9	Tweak error messages to reduce code size.	2020-01-29 17:32:07 -08:00
Dan Halbert	e21580b67f	PacketBuffer.packet_size was returning bool instead of int	2020-01-27 17:10:56 -05:00
Scott Shawcroft	39971794dd	Encapsulate buffers inside PixelBuf and refactor it.	2020-01-24 18:23:07 -08:00
Dan Halbert	2a75196aa3	merge from adafruit/circuitpython	2020-01-13 18:15:32 -05:00
Dan Halbert	9e7f8743c2	fix CCCD bonding store; avoid excessive bonding writes	2020-01-12 23:32:51 -05:00
Dan Halbert	346ce3b73b	wip: HID bonding works!	2020-01-10 23:55:45 -05:00
Scott Shawcroft	8708d3dc45	Merge pull request #2461 from jepler/urandom-hardfaults Urandom hardfaults	2020-01-10 11:37:59 -08:00
Dan Halbert	9c167af17a	wip; redid flash writing to be compatible with SD	2020-01-09 17:40:02 -05:00
Scott Shawcroft	a10cd8580c	Merge pull request #2445 from jepler/mp3-jeplayer-fixes Fixes for JEplayer	2020-01-08 12:50:13 -08:00
Jeff Epler	6735283d8f	os: Don't require an on-stack buffer This allows urandom requests of even 100k bytes to succeed on a fresh VM session on a Metro M4 express.	2020-01-08 09:43:13 -06:00
Jeff Epler	b1b4a9e842	fix doc build error	2020-01-06 09:26:32 -06:00
Jeff Epler	dc729718eb	audiomp3: rename to MP3Decoder	2020-01-06 07:51:41 -06:00
Scott Shawcroft	82fb761c0f	Add PacketBuffer and MTU negotiation support. PacketBuffer facilitates packet oriented BLE protocols such as BLE MIDI and the Apple Media Service. This also adds PHY, MTU and connection event extension negotiation to speed up data transfer when possible.	2020-01-03 17:29:54 -08:00
Dan Halbert	fc5f776429	Merge pull request #2034 from rhooper/new-pixelbuf-api Updates to pixelbuf API - Addresses #884	2020-01-03 17:19:02 -05:00
Roy Hooper	767ce1cdf8	remove unnecessary GCC pragmas	2020-01-02 18:03:18 -05:00
Roy Hooper	ccf158b030	raise mp_raise_NotImplementedError	2020-01-02 18:00:36 -05:00
Roy Hooper	fdddb54db4	rename call_show to pixelbuf_call_show	2020-01-02 17:56:04 -05:00
Jeff Epler	ec22520992	MP3File: Add rms_level property This lets a music player show it vu-meter style	2020-01-02 15:23:42 -06:00
Roy Hooper	4e1996856f	Fix docstring for byteorder	2020-01-01 19:25:44 -05:00
Roy Hooper	12193913a8	move native fill to a helper to work around being unable to call a subclass show method from the native superclass	2020-01-01 17:30:17 -05:00
Roy Hooper	8129a8503a	Revert "try a property with a callable static class" This reverts commit `ca5b2770cf`.	2020-01-01 16:10:22 -05:00
Roy Hooper	ca5b2770cf	try a property with a callable static class	2020-01-01 16:10:01 -05:00
David Glaude	01d49eb0a7	Update Shape.c Make no sense to say this is experimental and will change in 4.0.0 when we are already above 4.0.0. This should be removed, or updated to say it will not be in x.0.0	2019-12-30 16:54:16 +01:00
Roy Hooper	023d64fe4a	Merge branch 'pixelbuf-subscr-change' into new-pixelbuf-api	2019-12-29 13:56:47 -05:00
Roy Hooper	f1a9039632	Merge branch 'master' into pixelbuf-subscr-change	2019-12-29 13:56:31 -05:00
Jeff Epler	02154caf24	MP3File: Add a settable ".file" property This enables jeplayer to allocate just one MP3File at startup, rather than have to make repeated large allocations while the application is running. The buffers have to be allocated their theoretical maximum, but that doesn't matter much as all the real-life MP3 files I checked needed that much allocation anyway.	2019-12-23 09:36:46 -06:00
Roy Hooper	09d4fe0324	Merge branch 'master' into new-pixelbuf-api	2019-12-20 19:22:27 -05:00
Scott Shawcroft	5fc20145d1	Merge pull request #2390 from jepler/displayio-set-rotation displayio: make 'rotation' property settable	2019-12-20 09:34:25 -08:00
albang	00c226738d	Typo in doc	2019-12-19 23:16:51 +01:00
Jeff Epler	a63da7a6c0	displayio: make 'rotation' property settable	2019-12-16 15:23:41 -06:00
Roy Hooper	ef2a8906dd	move call to show outside loop	2019-12-16 15:05:09 -05:00
Roy Hooper	dc8dd6df20	Revert subscr signature change	2019-12-13 14:29:15 -05:00
Roy Hooper	72ad2e9259	Merge branch 'master' into new-pixelbuf-api	2019-12-13 13:45:16 -05:00
Scott Shawcroft	9a3d45e7d0	Add extended, connectable and scannable error. Related to https://github.com/adafruit/Adafruit_CircuitPython_BLE/issues/44	2019-12-12 13:46:59 -08:00
Roy Hooper	0326c98fd5	Merge branch 'master' into new-pixelbuf-api	2019-12-10 20:44:43 -05:00
Roy Hooper	222dd29a14	Fix slice step.	2019-12-10 20:43:00 -05:00
Jeff Epler	a08d9e6d8e	audiocore: Add MP3File using Adafruit_MP3 library	2019-12-10 14:03:06 -06:00
Scott Shawcroft	19ac8aea8c	Merge pull request #2353 from jepler/audiosample-protocol Convert audiosamples to use micropython "protocols" (safely)	2019-12-09 14:50:16 -08:00
Roy Hooper	dd7ac68fb0	fix slice anf fill bugs	2019-12-08 16:53:08 -05:00
Dan Halbert	f5e913101c	Merge pull request #2301 from tannewt/support_extended_advertising Add support for extended (>31 byte) BLE advertisements.	2019-12-06 23:51:05 -05:00
Scott Shawcroft	da0ea979ff	Check connection validity after service discovery. Fixes #2347	2019-12-06 16:03:14 -08:00
Dan Halbert	559ce6a949	Merge pull request #2356 from tannewt/central_pairing Add connection interval and debugging	2019-12-06 15:19:40 -05:00
Dan Halbert	e30dde0afc	Make _bleio.Connection.disconnect() idempotent	2019-12-05 08:40:53 -05:00
Scott Shawcroft	17c8356b8c	Add connection interval and debugging This also sets TinyUSB to master and to not include its submodules. It also fixes an old displayio example comment and retries gattc reads.	2019-12-04 14:39:02 -08:00
Jeff Epler	feb8eb935b	audiosample: convert to use a protocol This eases addition of new sample sources, since the manual virtual function dispatch functions are just calls via a protocol	2019-12-04 09:31:52 -06:00
Jeff Epler	238e121236	protocols: Allow them to be (optionally) type-safe Protocols are nice, but there is no way for C code to verify whether a type's "protocol" structure actually implements some particular protocol. As a result, you can pass an object that implements the "vfs" protocol to one that expects the "stream" protocol, and the opposite of awesomeness ensues. This patch adds an OPTIONAL (but enabled by default) protocol identifier as the first member of any protocol structure. This identifier is simply a unique QSTR chosen by the protocol designer and used by each protocol implementer. When checking for protocol support, instead of just checking whether the object's type has a non-NULL protocol field, use `mp_proto_get` which implements the protocol check when possible. The existing protocols are now named: protocol_framebuf protocol_i2c protocol_pin protocol_stream protocol_spi protocol_vfs (most of these are unused in CP and are just inherited from MP; vfs and stream are definitely used though) I did not find any crashing examples, but here's one to give a flavor of what is improved, using `micropython_coverage`. Before the change, the vfs "ioctl" protocol is invoked, and the result is not intelligible as json (but it could have resulted in a hard fault, potentially): >>> import uos, ujson >>> u = uos.VfsPosix('/tmp') >>> ujson.load(u) Traceback (most recent call last): File "<stdin>", line 1, in <module> ValueError: syntax error in JSON After the change, the vfs object is correctly detected as not supporting the stream protocol: >>> ujson.load(p) Traceback (most recent call last): File "<stdin>", line 1, in <module> OSError: stream operation not supported	2019-12-04 09:29:57 -06:00
Roy Hooper	0d267eaee1	fix compile fails	2019-12-02 14:25:57 -05:00
Roy Hooper	a4bbf35092	Merge branch 'master' into new-pixelbuf-api	2019-12-02 14:06:33 -05:00
Dan Halbert	d089f16656	'seconds'	2019-11-27 14:49:39 -05:00
Dan Halbert	dd6dfeb30a	Squeeze pyruler zh_Latn_pinyin	2019-11-27 14:47:35 -05:00
Dan Halbert	b32a9192df	make UART.write be blocking on SAMD; add timeout property	2019-11-27 13:05:29 -05:00
Roy Hooper	a9624fff25	add show	2019-11-26 21:28:41 -05:00
Roy Hooper	56720eae0a	remove unnecessary intermediate mp_obj_subscr wrapper	2019-11-26 18:39:08 -05:00
Scott Shawcroft	3fc58cee38	Merge remote-tracking branch 'adafruit/master' into support_extended_advertising	2019-11-26 13:12:43 -08:00
Jeff Epler	e188ae8b23	time: struct_time: allow construction like a namedtuple, too Whenever there is more than one argument, delegate the operation to namedtuple_make_new. This allows other circuitpython-compatible idioms, like with keywords time.struct_time(tm_year=2000, tm_mon=1, tm_mday=1, tm_hour=0, tm_min=0, tm_sec=14, tm_wday=5, tm_yday=5, tm_isdst=-1) with 9 positional arguments, etc. The only vaguely plausible CPython behavior still not permitted in CircuitPython that I found is constructing a timetuple from a length-9 list, a la time.struct_time(list(time.localtime()) Even better, by getting rid of an error message, the build shrinks a tiny bit.	2019-11-26 08:45:44 -06:00
Jeff Epler	8f24ea48fb	time: struct_time: allow construction from another struct_time This doesn't cover ALL the cases that CPython permits for construction of a struct_time, but it at least makes constructing from any namedtuple work. Closes: #2326	2019-11-26 08:45:40 -06:00
Roy Hooper	0ef9344c17	make pixelbuf iterable	2019-11-25 20:21:00 -05:00
Roy Hooper	d4ed258b74	remove unnecessary qstrs	2019-11-25 20:20:51 -05:00
Jeff Epler	5115fdaa6f	shared-bindings: I2SOut: Ensure object is deinitialised (or deinitialized, for those of us on this side of the pond) Otherwise, a sequence like ``` audio = audiobusio.I2SOut(bit_clock=board.D6, word_select=board.D9, data=board.D10) sine_wave_sample = audiocore.RawSample(sine_wave) audio.play(sine_wave_sample, loop=True) del audio ``` could free the memory associated with audio without stopping the related background task. Later, when fresh objects are allocated within a now-freed memory region, they can get overwritten in the background task, leading to a hard crash. This presumably can affect multiple I2S implementations, but it was reported against the nRF one.	2019-11-25 09:53:55 -06:00
Roy Hooper	a9baa441c9	disable -Wunused-parameter on subscr functions	2019-11-23 13:52:14 -05:00
Roy Hooper	6108fa3766	Merge branch 'master' into new-pixelbuf-api	2019-11-23 12:22:04 -05:00
Roy Hooper	c770ccd939	make ->subscr take an instance to pass when instance_subscr is called from subscr.	2019-11-23 12:09:26 -05:00
Scott Shawcroft	743bc829ab	Clean up debug changes	2019-11-21 16:39:57 -08:00
Scott Shawcroft	39f4046f70	Fix pairing when peripheral. Central untested.	2019-11-21 16:32:42 -08:00
Scott Shawcroft	98e55eb577	Only add module when printing exception.	2019-11-21 12:26:25 -08:00
Scott Shawcroft	521c7531bc	Improve printing to include _bleio. prefix for type.	2019-11-21 11:04:17 -08:00
Scott Shawcroft	5e857fdb67	Use BluetoothError in _bleio This better differentiates errors than using OSError everywhere.	2019-11-20 14:02:15 -08:00
Scott Shawcroft	11c2c3443f	Add support for extended (>31 byte) BLE advertisements.	2019-11-19 13:55:58 -08:00
Hierophect	81223c76bd	revert error	2019-11-15 13:04:25 -05:00
Hierophect	2c6781f74d	move neopixel_in_use flag to shared-bindings	2019-11-15 12:59:52 -05:00
Hierophect	de5691acf5	Add never_reset and reset to pin common hal, adjust files	2019-11-15 12:47:00 -05:00
Dan Halbert	8584c1e824	Fix start_scan timeout default value	2019-11-13 21:34:20 -05:00
Dan Halbert	8cd2f87e99	Merge pull request #2236 from tannewt/bleio_tweaks Refine _bleio	2019-11-04 22:27:54 -05:00
Scott Shawcroft	47e50e5659	Merge remote-tracking branch 'adafruit/master' into bleio_tweaks	2019-11-01 13:20:58 -07:00
Dan Halbert	43b8d5e8ab	Update I2C and SPI documentation	2019-10-29 09:58:44 -04:00
Dan Halbert	56ac41fabf	Merge pull request #2240 from theacodes/fix-2086 Track unadjusted PWM duty cycle to avoid accumulating conversion errors	2019-10-28 14:50:01 -04:00
Dan Halbert	cc13fc3433	Merge pull request #2247 from jepler/comment-doc-typos Comment doc typos	2019-10-28 14:47:52 -04:00
Jeff Epler	c208586bf1	audioio: correct trivial typo	2019-10-27 16:42:18 -05:00
Jeff Epler	0657884fca	audiobus: correct trivial typo	2019-10-27 16:42:04 -05:00
Jeff Epler	978cec0316	pixelbuf: correct trivial typos	2019-10-27 16:41:56 -05:00
Thea Flowers	6782948751	Note behavior in documentation	2019-10-25 10:56:41 -07:00
Thea Flowers	4a55c48dbf	Improve documentation for `rtc`. - Add examples for `rtc.RTC.datetime`. - Add type for `rtc.RTC.calibration`. - Expand on use cases for `rtc.set_time_source`.	2019-10-23 15:48:34 -07:00
Scott Shawcroft	91c9d519ae	Refine comments and switch prefix_len to size_t	2019-10-22 23:09:56 -07:00
Scott Shawcroft	ae30a1e5aa	Refine _bleio This PR refines the _bleio API. It was originally motivated by the addition of a new CircuitPython service that enables reading and modifying files on the device. Moving the BLE lifecycle outside of the VM motivated a number of changes to remove heap allocations in some APIs. It also motivated unifying connection initiation to the Adapter class rather than the Central and Peripheral classes which have been removed. Adapter now handles the GAP portion of BLE including advertising, which has moved but is largely unchanged, and scanning, which has been enhanced to return an iterator of filtered results. Once a connection is created (either by us (aka Central) or a remote device (aka Peripheral)) it is represented by a new Connection class. This class knows the current connection state and can discover and instantiate remote Services along with their Characteristics and Descriptors. Relates to #586	2019-10-21 18:57:03 -07:00
Roy Hooper	2970680e6a	fix show and fix step > 1	2019-10-20 19:54:25 -04:00
Dan Halbert	eca73436c9	Merge remote-tracking branch 'adafruit/master' into cpu-voltage	2019-10-15 09:03:24 -04:00
Kamil Tomaszewski	150f9041e3	Fix unsafe floating point comparison	2019-10-14 09:13:35 +02:00
Kamil Tomaszewski	c67b2c1661	Return None if reference_voltage is 0.0	2019-10-14 08:22:14 +02:00
Dan Halbert	c1ab2486f9	return chip vcc value	2019-10-12 15:42:15 -04:00
Roy Hooper	dc8c27d129	make dotstar byteorder constants start with P. fix small bugs.	2019-10-06 22:44:00 -04:00
Roy Hooper	55c688cbeb	restructure to be subclassable	2019-10-05 15:53:53 -04:00
Roy Hooper	000ae6bf17	support subclasses	2019-10-05 13:47:40 -04:00
Roy Hooper	1051001495	Merge branch 'master' into new-pixelbuf-api	2019-10-03 19:06:55 -04:00
Scott Shawcroft	6ad860a963	Merge pull request #2101 from matthewnewberg/display_io_dither Add random dithering to ColorConverter	2019-09-09 10:11:07 -07:00
Scott Shawcroft	d9e0641606	Set dither default to False and document it	2019-09-08 21:30:52 -07:00
Matthew Newberg	8e55232492	Use kwargs for dither in ColorConverter constructor	2019-09-06 16:23:24 -04:00
Matthew Newberg	b2fb5ac1c1	Fix comment on color converter	2019-09-06 16:11:15 -04:00
Matthew Newberg	4604a69498	Move dither parameter to ColorConverter constructor and parameter	2019-09-05 21:55:45 -04:00
Dan Halbert	fca440fb66	Merge pull request #2113 from tannewt/displayio_hidden Add .hidden to TileGrid and Group	2019-09-04 15:48:00 -04:00
Scott Shawcroft	321b57a5d2	Merge pull request #2080 from sommersoft/mixer_voice Add audiocore.MixerVoice	2019-09-04 12:46:59 -07:00
Radomir Dopieralski	5f6228b6f0	Fix transactions in _stage after displayio changes Also, move the rendering setup code to shared-module from shared-bindings. In CP 5.0, displayio_display_core_set_region_to_update now starts its own transaction, so it has to be moved outside of the transaction started by the render call.	2019-09-04 16:41:58 +02:00
sommersoft	da912e8c74	doc cleanup	2019-09-03 22:44:43 -05:00
Scott Shawcroft	949f8761b8	Add .hidden to TileGrid and Group This allows for one to preserve ordering within a Group while hiding something temporarily. Fixes #1688	2019-09-03 16:15:27 -07:00
sommersoft	b1c3d47413	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-09-01 21:16:12 -05:00
Matthew Newberg	d87bfaf480	Add random dithering to ColorConverter	2019-08-31 22:07:09 -04:00
sommersoft	398e7ff6d3	doc update	2019-08-31 16:06:41 -05:00
sommersoft	f82c61732a	enable Mixer backwards compatibility (when audiomixer is available)	2019-08-31 16:06:16 -05:00
sommersoft	8120f5cdad	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-08-29 22:14:53 -05:00
sommersoft	6a68d0b4d0	bring back 'mixer.play()' & 'mixer.stop_voice()'	2019-08-29 22:12:12 -05:00
sommersoft	e618441e18	eval the expression vs [un]defined	2019-08-29 22:09:45 -05:00
Dan Halbert	7a64af9280	rename bleio module to _bleio	2019-08-29 18:44:27 -04:00
Dan Halbert	b11b7916fd	address minor issues: typos, make translate, and sphinx	2019-08-29 17:58:21 -04:00
Dan Halbert	f17059b10b	another API rework: less abstraction leakage	2019-08-28 23:15:22 -04:00
Dan Halbert	19c59b41ed	bleio: API change to create and connect related objects simulatenously: no orphan bleio objects	2019-08-28 16:15:09 -04:00
Dan Halbert	a72bcab0fd	Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp	2019-08-28 16:09:18 -04:00
Scott Shawcroft	966a48b23a	More size_t usage	2019-08-27 12:49:46 -07:00
Scott Shawcroft	d956b3b359	Merge remote-tracking branch 'adafruit/master' into remove_i2c_stop_kwarg	2019-08-27 11:23:30 -07:00
Scott Shawcroft	bea77c651a	Minor renames	2019-08-26 16:37:59 -07:00
Dan Halbert	76446f634b	BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding	2019-08-25 21:38:13 -04:00
sommersoft	750ffcc81a	docs: correct audiomixer refs	2019-08-25 14:57:29 -05:00
sommersoft	df5568d993	move Mixer & MixerVoice from 'audiocore' to 'audiomixer'	2019-08-24 23:36:18 -05:00
sommersoft	b54fd961cb	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-08-24 17:14:05 -05:00
sommersoft	db32a79596	comment clean up	2019-08-24 16:21:30 -05:00
sommersoft	d02d474cac	fix MixerVoice 'get_playing'	2019-08-24 08:20:26 -05:00
sommersoft	93e557e167	docs: make MixerVoice.level a property	2019-08-24 07:57:55 -05:00
sommersoft	2c55b40a53	use a MixerVoice constructor	2019-08-24 07:56:12 -05:00
Scott Shawcroft	7324b70a7c	Rework based on Dan's review	2019-08-23 15:27:21 -07:00
Scott Shawcroft	5662b5813e	Use size_t and document buffers can be the same.	2019-08-23 12:13:11 -07:00
Scott Shawcroft	72e7ffa324	More cleanup	2019-08-22 16:16:09 -07:00
sommersoft	1ec4faee55	remove MixerVoice deinit & context managers	2019-08-22 17:59:19 -05:00
Scott Shawcroft	f2a1972ba8	Add refresh_time to use if busy_pin is not given	2019-08-22 14:23:33 -07:00
Scott Shawcroft	3a98de1236	Add reset() to display busses to detect whether it works	2019-08-22 14:23:33 -07:00
Scott Shawcroft	24b30965c4	Refresh ePaper displays once code.py is done running	2019-08-22 14:23:32 -07:00
Scott Shawcroft	36a23e0fe3	Rework refresh API and factor common display stuff out NOT TESTED! Just compiles Fixes #1691	2019-08-22 14:23:27 -07:00
Scott Shawcroft	c247e7df9c	Begin refresh rework.	2019-08-22 14:08:33 -07:00
Scott Shawcroft	70680d5b22	EPaper displays work mostly.	2019-08-22 14:08:33 -07:00
Scott Shawcroft	8fa8737465	Initial ePaper work	2019-08-22 14:08:32 -07:00
Scott Shawcroft	82d436d05e	Add writeto_then_readfrom to I2C API. Deprecate stop kwarg. writeto_then_readfrom has been added to do a write -> no stop -> repeated start -> read sequence. This is done to match the capabilities of Blinka on Linux. Code that uses stop=False will not work correctly on Blinka. To fix, if stop=False then use writeto_then_readfrom otherwise use writeto then readfrom_into. First step in #2082	2019-08-22 12:34:46 -07:00
Dan Halbert	7cc15e56c8	make translate	2019-08-22 15:20:23 -04:00
Dave Astels	99a3da3b60	Get rid of the last bits of array dependancy	2019-08-21 15:24:39 -04:00
Dave Astels	d547d59cba	Merge remote-tracking branch 'adafruit/master' into displayio_fill_area	2019-08-21 15:02:51 -04:00
Dave Astels	8bbab01316	Remove unneeded lines	2019-08-21 13:57:52 -04:00
sommersoft	5cd04366fe	remove 'if float' pre-processor checks	2019-08-20 22:39:26 -05:00
Dave Astels	56aad056da	getting the buffer info should happen first (due to its check)	2019-08-20 17:00:24 -04:00
Dave Astels	eb0a8cc0bf	Move the get_buffer call earlier	2019-08-20 13:48:12 -04:00
Dave Astels	0fd886fa7f	Remove array cast	2019-08-20 13:45:58 -04:00
Dan Halbert	e00696de7f	merge from upstream and make translate	2019-08-20 13:06:23 -04:00
Dave Astels	f3d476aad8	Remove temporarily comments code	2019-08-20 12:25:56 -04:00
Dave Astels	53bb95a023	Rework to simplify	2019-08-20 10:05:41 -04:00
Dave Astels	10bc0d29d1	Switch to positional parameters	2019-08-20 10:05:09 -04:00
Dave Astels	2b7897cded	Fix typo	2019-08-20 10:03:36 -04:00
sommersoft	e9efc2fe25	fix one more doc ref to audiocore	2019-08-20 08:32:20 -05:00
Dan Halbert	cccbbd956d	Detect lack of pulldown; check for pin in use	2019-08-19 23:40:34 -04:00
sommersoft	e92ef7b018	fix doc refs for audiocore	2019-08-19 22:04:06 -05:00
Scott Shawcroft	bd4d3c6393	Merge pull request #2068 from jepler/audioio-compat audioio: By default, be compatible with 4.x	2019-08-19 19:43:52 -07:00
sommersoft	1b2996a75e	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-08-19 21:23:27 -05:00
Dan Halbert	e3dc5e3a66	Merge remote-tracking branch 'adafruit/master' into run-background-tasks Restore dependencies indicated by indentation in circuitpy_mpconfig.h.	2019-08-19 12:41:20 -04:00
Dan Halbert	6b54e6749e	Merge pull request #2032 from pewpew-game/audiocore-buffer Allow to specify pre-allocated buffer in audicore.WaveFile	2019-08-19 11:54:19 -04:00
Jeff Epler	f384d2dd80	shared-bindings/time: style	2019-08-18 08:11:14 -05:00
Dan Halbert	e2a4c76a37	make nrf touchio be generic: now available for SAMD51 too	2019-08-18 08:44:10 -04:00
Jeff Epler	9d164965c9	localtime: don't hard-fault on argument type errors; handle localtime(float) It turns out `mp_obj_int_get_checked` is not appropriate to call when the argument is not of int or long type--the "checked" refers to guarding against overflow/underflow, not type checking. For compatibility with CPython, handle float arguments. Closes: #2069	2019-08-17 20:49:25 -05:00
Jeff Epler	47d6dd843e	audioio: By default, be compatible with 4.x Testing performed: That the shipped .mpy files on a PyPortal (CP 4.x) still work (play audio) with this branch, instead of erroring because `WaveFile` can't be found in `audioio`. Flash usage grew by 28 bytes. (I expected 24, there must be some other effect on size/alignment that I didn't predict)	2019-08-17 13:54:06 -05:00
Radomir Dopieralski	58b4cd4956	Improve docs for WaveFile buffer	2019-08-17 11:31:45 +02:00
Dave Astels	7a235f3746	Simplify to only extracting one line Since this was the usecase, doing so simplifies the function significantly.	2019-08-16 21:10:09 -04:00
Dan Halbert	630c92392a	address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings	2019-08-16 15:18:53 -04:00
Dan Halbert	af29fc3ea8	make translate and fix sphinx issues	2019-08-15 21:54:52 -04:00
Jeff Epler	32a6d36405	shared-bindings: Use RUN_BACKGROUND_TASKS	2019-08-11 08:53:02 -05:00
Dan Halbert	1570ef2dd4	specifying attribute length; fix up value setting	2019-08-07 23:49:09 -04:00
Dave Astels	239ad19765	Pass in preallocated result buffer	2019-08-07 15:27:43 -04:00
Dave Astels	263f6f439b	Remove obsolete experimental property	2019-08-07 15:27:04 -04:00
Dan Halbert	d047b73a9c	fix newly-introduced bugs; UART client/server working again	2019-08-07 11:10:21 -04:00
Dan Halbert	d74c8b9425	WIP: more Descriptor work; refactor gattc/gatts read/write	2019-08-06 22:55:25 -04:00
Dan Halbert	243334da75	Merge remote-tracking branch 'adafruit/master' into ble-pairing	2019-08-05 23:06:24 -04:00
Scott Shawcroft	26f64dd8ec	Merge remote-tracking branch 'adafruit/4.1.x' into merge_in_410	2019-08-05 17:53:08 -07:00
Scott Shawcroft	b675a27e16	Merge pull request #2000 from jepler/nrf-pwm-audio Implement PWM audio out for the nrf port	2019-08-05 17:26:27 -07:00
Dan Halbert	b67d04a5b1	Merge remote-tracking branch 'adafruit/master' into ble-pairing	2019-08-05 16:35:44 -04:00
Roy Hooper	3cf9a475b9	fix 'white' byte for dotstars	2019-08-04 11:02:33 -04:00
Roy Hooper	5c08182c73	fix fix the byte order property.	2019-08-03 13:35:11 -04:00
sommersoft	065efb05b7	bring MixerVoice back to building state; update documentation	2019-08-03 11:20:06 -05:00
Radomir Dopieralski	9907e3fa28	Allow to specify pre-allocated buffer in audicore.WaveFile It lets us re-use the same buffer for playing multiple files. This also allows us to control the size of the buffer. Half of the buffer will be used for the fist, and half for the second internal buffer.	2019-08-03 14:15:19 +02:00
Dan Halbert	7ce3776b80	WIP: rework of Characteristic properties; enhance Descriptor; not tested	2019-08-02 17:57:31 -04:00
Radomir Dopieralski	c1e5247d51	Add support for scaling to _stage On high-resolution displays we can use 2x2 or even 3x3 pixels.	2019-08-02 22:55:55 +02:00
Roy Hooper	cff9c9bc95	Reuse error message	2019-08-01 20:24:39 -04:00
Dave Astels	cd092df9d8	Merge remote-tracking branch 'adafruit/master' into displayio_fill_area	2019-07-31 18:46:41 -04:00
sommersoft	9939d0c4f4	Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice	2019-07-31 16:44:43 -05:00
Jeff Epler	b0f7c7bc4c	Merge remote-tracking branch 'origin/master' into nrf-pwm-audio	2019-07-31 16:32:54 -05:00
Radomir Dopieralski	c4c5d8c5e7	Fix missing write_ram_command in _stage Since the changes in displayio, displayio_display_set_region_to_update no longer sends the write_ram_command, so we have to send it explicitly.	2019-07-31 23:32:42 +02:00
Dave Astels	1f9cb44fa3	Expose rotation with a property	2019-07-31 15:00:21 -04:00
Dave Astels	741cd9c40a	Get fill_area working	2019-07-31 12:47:32 -04:00
Dan Halbert	ee518b9141	Merge remote-tracking branch 'adafruit/master' into ble-pairing	2019-07-31 11:22:48 -04:00
Dan Halbert	91d791afd0	cleanup adapter.address; add uniquish suffix to BLE device name	2019-07-31 00:30:24 -04:00
Scott Shawcroft	366fdcce18	Merge pull request #2011 from tannewt/ssd1322 Add knobs for SSD1322 and two displayio fixes.	2019-07-30 14:15:37 -07:00
Dan Halbert	83129b8c63	BLE: peripheral client pairing (not yet bonding); fix time doc formatting	2019-07-30 14:26:26 -04:00
Scott Shawcroft	f9d314b263	Merge pull request #1985 from sommersoft/dynamic_support_matrix Docs: Dynamically Build Support Matrix Table	2019-07-29 18:08:16 -07:00
Scott Shawcroft	3b3a7bbd06	Update pwmaudioio module for PWMAudioOut	2019-07-29 17:45:06 -07:00
Scott Shawcroft	3961014a9e	Update doc comments for PWMAudioOut	2019-07-29 17:43:22 -07:00
Jeff Epler	b72352949b	PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_	2019-07-29 18:39:00 -04:00
sommersoft	bbc5255f04	update rST ref link for support matrix	2019-07-28 21:25:43 -05:00
Seth Itow	a2bab9f172	bleio: Fix typo in Peripheral example code.	2019-07-27 12:58:28 -07:00
Dan Halbert	28ca05ccdc	allow discovery from central or peripheral	2019-07-27 13:22:15 -04:00
sommersoft	cebdadd0f6	Merge branch 'master' into dynamic_support_matrix	2019-07-27 10:46:53 -05:00
sommersoft	c335f170d7	update 'Core Modules' description	2019-07-27 10:36:08 -05:00
sommersoft	c6ac0ba683	move the support matrix to its own page; add linking for modules	2019-07-27 10:03:18 -05:00
Roy Hooper	cf3bb7e118	fix bugs and inline the byteorder code	2019-07-26 18:52:22 -04:00
Jeff Epler	aa1398e696	support matrix: add audiopwmio, update audiocore, sort	2019-07-26 07:57:21 -05:00
Jeff Epler	91b7ba7dcc	docs: An `audiocore.Mixer` suffices where another audio source would	2019-07-26 07:57:21 -05:00
Jeff Epler	a53720810b	docs: corrections that stem from the "audiocore" rename	2019-07-26 07:57:21 -05:00
Jeff Epler	54cde56ec5	audiopwmio: Add the shared files for this new module	2019-07-26 07:52:37 -05:00
Scott Shawcroft	af8cfbedfb	Add knobs for SSD1322 and two fixes. * Fix terminal clear after first successful code.py run. * Fix transmitting too many bytes for column constraint with single byte bounds.	2019-07-25 15:41:12 -07:00
Dave Astels	b6178c9d85	WIP on exposing fill_area	2019-07-25 15:05:30 -04:00
Scott Shawcroft	485f06e36f	Remove unneeded headers	2019-07-25 11:58:27 -07:00
Jeff Epler	6b44e40ee8	audiocore: Factor from audioio When nrf pwm audio is introduced, it will be called `audiopwmio`. To enable code sharing with the existing (dac-based) `audioio`, factor the sample and mixer types to `audiocore`. INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must be imported from `audiocore`, not `audioio`.	2019-07-25 06:44:26 -05:00
sommersoft	7b67ef15c4	remove local copy of 'support_matrix.json'	2019-07-23 17:11:39 -05:00
Roy Hooper	31e4591691	WIP: refactor _pixelbuf to use strings instead of classes	2019-07-21 16:37:06 -04:00
Roy Hooper	a62a1ae2bd	WIP: refactor _pixelbuf to use strings instead of classes	2019-07-21 16:30:09 -04:00
Roy Hooper	db84445a62	WIP: refactor _pixelbuf to use strings instead of classes	2019-07-21 16:21:39 -04:00
Scott Shawcroft	1d1b8703b6	Review feedback including NO_BRIGHTNESS_COMMAND macro	2019-07-19 16:11:13 -07:00
Scott Shawcroft	6797ec6ed3	Add support for grayscale displays that are < 8 bit depth. This also improves Palette so it stores the original RGB888 colors. Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly useful for the SSD1306. Fixes #1828. Fixes #1956	2019-07-19 16:06:11 -07:00
Scott Shawcroft	4a6bdb6fe4	Track a dirty area for in-memory bitmaps This fixes the bug that bitmap changes do not cause screen updates and optimizes the refresh when the bitmap is simply shown on the screen. If the bitmap is used in tiles, then changing it will cause all TileGrids using it to do a full refresh. Fixes #1981	2019-07-18 16:47:28 -07:00
Dan Halbert	1c31cf5f6a	sphinx fix	2019-07-16 21:03:36 -04:00
Dan Halbert	364ee62d10	Address review comments.	2019-07-16 19:53:36 -04:00
Dan Halbert	514d4146d3	Fix sphinx warnings.	2019-07-11 18:23:45 -04:00
Dan Halbert	6a001786a9	merge from master	2019-07-09 08:58:49 -04:00
Dan Halbert	118b26b335	UARTClient now works both directions	2019-07-09 00:21:46 -04:00
Dan Halbert	09ddff8df1	WIP: Need descriptors for Central CCCD discovery; not done yet	2019-07-07 00:07:47 -04:00
sommersoft	4342383d95	add jinja extension; update shared-bindings/index.rst to use jinja	2019-07-04 01:19:56 -05:00
sommersoft	f1256c0b35	add script to gather module support matrix info; add initial json file	2019-07-04 01:18:16 -05:00
iot49	6e5d70fa19	changed type of receiver_buffer_size to uint16_t	2019-07-03 12:02:01 -07:00
Dan Halbert	bf8a35b2f8	WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service	2019-07-02 22:34:54 -04:00
Scott Shawcroft	745ff8f8c1	Fix Group subscr to detect delete correctly Fixes #1957	2019-07-02 18:15:23 -07:00
Dan Halbert	6ea01ea9b0	Central is connecting; characteristics can be read and written	2019-06-29 00:20:06 -04:00
Dan Halbert	140904ec84	getting Scanner to work	2019-06-22 22:10:15 -04:00
Dan Halbert	4881e1ff55	WIP: Central compiles; now will test	2019-06-21 18:04:04 -04:00
Dan Halbert	24ac1fdcab	WIP: backup only; not compiled	2019-06-19 21:54:28 -04:00
Dan Halbert	a1b5d800f3	Update copyrights; get ready for Central	2019-06-19 10:42:36 -04:00
Dan Halbert	35b9191857	Don't operate directly on bleio objects in shared-bindings: use common_hal routines instead. Changes made but not yet tested.	2019-06-18 23:46:20 -04:00
Craig Forbes	09e7f4db00	Fix reference to Bitmap in fontio.Glyph docs.	2019-06-18 18:44:50 -05:00
Craig Forbes	e442efbdec	Fix docs in digitalio.	2019-06-18 16:59:05 -05:00
Craig Forbes	db74b92e77	Fix displayio.Display docstring type for display_bus. Add docs for group parameter for Display.show.	2019-06-18 16:59:05 -05:00
Dan Halbert	1356819de1	Handle None for BLE name; fix ScanEntry bug; compile issue	2019-06-17 23:16:40 -04:00
Scott Shawcroft	4013bcde9e	Add baudrate to FourWire and shorten delay.	2019-06-17 17:48:05 -07:00
Dan Halbert	cfa8b4b5a9	Merge remote-tracking branch 'adafruit/master' into ble-scanner	2019-06-13 22:01:46 -04:00
Dan Halbert	bed6d43a76	merge from upstream; WIP redo Address; no more AddressType	2019-06-13 21:55:07 -04:00
Scott Shawcroft	6d388a34eb	Merge pull request #1943 from adafruit/4.0.x Merge in gamepadshift fix to master.	2019-06-13 12:26:04 -07:00
Scott Shawcroft	6f6dcafd90	Minor tweaks based on Dan's feedback	2019-06-13 00:34:19 -07:00
Radomir Dopieralski	5e265f4fbd	When clearing gamepad buffer, use the last button state, not 0 When reading the accumulated button presses in gamepad and gamepadshift, don't clear the buffer to "no buttons pressed", but instead set it to the current (last checked) state. This clears the accumulated presses, but retains any ongoing ones. This fixes #1935	2019-06-12 11:42:41 -07:00
Scott Shawcroft	a35d9b469d	Refactor deinit check to reduce code size.	2019-06-12 11:36:43 -07:00
Scott Shawcroft	eb21fc3e31	Add partial display update support. Different operations to the display tree have different costs. Be aware of these costs when optimizing your code. * Changing tiles indices in a TileGrid will update an area covering them all. * Changing a palette will refresh every object that references it. * Moving a TileGrid will update both where it was and where it moved to. * Adding something to a Group will refresh each individual area it covers. * Removing things from a Group will refresh one area that covers all previous locations. (Not separate areas like add.) * Setting a new top level Group will refresh the entire display. Only TileGrid moves are optimized for overlap. All other overlaps cause sending of duplicate pixels. This also adds flip_x, flip_y and transpose_xy to TileGrid. They change the direction of the pixels but not the location. Fixes #1169. Fixes #1705. Fixes #1923.	2019-06-12 11:32:39 -07:00
Dan Halbert	4fc189b60c	Merge latest 4.0.x fixes into master	2019-06-11 16:16:29 -04:00
Dan Halbert	6fed24e1b6	WIP	2019-06-10 07:18:28 -04:00
sommersoft	9e4396bdcd	Merge pull request #1920 from tannewt/fix_rst Improve rST consistency for rst2pyi use	2019-06-07 23:41:00 -05:00
Dan Halbert	62de2506e4	Include display objects in gc.	2019-06-06 17:49:32 -04:00
Scott Shawcroft	84e89146d0	Merge pull request #1893 from elvis-epx/ps2 Add PS/2 support with ps2io module	2019-06-06 10:24:04 -07:00
Baozhu Zuo	f45daae09c	This __init__.h should be redundant. I deleted it for you	2019-06-06 15:44:29 +08:00
Elvis Pfützenreuter	1da8d4b4da	Add PS/2 support -- ps2io module	2019-06-04 18:05:46 -03:00
Dan Halbert	613e12f99f	Replace Broadcaster with enhanced Peripheral	2019-06-03 20:40:05 -04:00
Dan Halbert	63ac37946d	1. Remove advertising data construction in C: it's all done in Python now 2. Add scan response capability to advertising.	2019-06-02 23:21:30 -04:00
Dan Halbert	12f1d9d30c	fix advertisement length check; add Service.secondary attribute	2019-05-31 18:03:05 -04:00
Scott Shawcroft	cfe24b8532	Improve rST consistency for rst2pyi use	2019-05-30 19:02:47 -07:00
Jason Pecor	a9a2227167	Removed warning box regarding SAMD21 builds The support matrix shows that pulseio is supported for all SAMD21/SAMD51 variants. Removing warning to avoid confusion.	2019-05-27 14:08:19 -05:00
Dan Halbert	6cec81bcb5	Need to enable ble before scanning	2019-05-23 22:05:16 -04:00
Dan Halbert	1639354e5f	Scanner working, but not very first time	2019-05-23 16:07:54 -04:00
Scott Shawcroft	3fad7de8db	Rework the pixel computation to use areas This changes the displayio pixel computation from per-pixel to per-area. This is precursor work to updating portions of the screen (#1169). It should provide mild speedups because bounds checks are done once per area rather than once per pixel. Filling by area also allows TileGrid to maintain a row-associative fill pattern even when the display's refresh is orthogonal to it.	2019-05-21 17:41:06 -07:00
Dan Halbert	b71f6c97ce	Merge remote-tracking branch 'adafruit/master' into ble-scanner	2019-05-21 15:33:48 -04:00
Dan Halbert	ee8119779e	WIP	2019-05-17 15:47:12 -04:00
Scott Shawcroft	5608e273a0	Add index and remove to Group.	2019-05-15 11:33:16 -07:00
Scott Shawcroft	b7b55e0c0a	Make Group iterable via a generic native iterator. Fixes #1694	2019-05-14 15:15:23 -07:00
Dan Halbert	d3ce9280e2	Merge pull request #1883 from tannewt/fix_1881 Check native object in case of early access	2019-05-14 15:30:44 -04:00
Scott Shawcroft	bf682d14b3	Remove native init check from stage. It isn't needed because the object is passed in, not self. To be passed in it must be inited.	2019-05-14 10:20:04 -07:00
Matt Land	0b1c1c1d92	Update Palette.c Remove None, add in byte and bytearray examples	2019-05-14 08:03:34 -05:00
Scott Shawcroft	f29de51325	Check native object in case of early access If a native displayio object is accessed before it's super().__init__() has been called, then a placeholder is given that will cause a crash if accessed. This is tricky to get right so we detect this case and raise a NotInplementedError instead of crashing. Fixes #1881	2019-05-13 17:31:30 -07:00
Matt Land	ad211b23be	add documentation of transparency	2019-05-10 17:35:51 -05:00
Matt Land	214dfed703	Add documentation for Palette shared binding Add documentation for the palette subscript operator and how to use it.	2019-05-10 16:41:13 -05:00
Nick Moore	af0bba0622	reset wiznet at network deinitialize adafruit/circuitpython#1800	2019-05-10 13:55:45 +10:00
Nick Moore	e00a702ce9	Stop DHCP when configuring IP address adafruit/circuitpython#1800	2019-05-10 09:20:57 +10:00
Nick Moore	832f07a6e9	Update docs for wiznet5k adafruit/circuitpython#1800	2019-05-07 21:48:44 +10:00
Nick Moore	264fc2b070	Make wiznet5k RST pin optional adafruit/circuitpython#1800	2019-05-07 18:41:53 +10:00
Nick Moore	d97c81b0c9	Update docs to include new 'dhcp' constructor parameter	2019-05-02 19:14:22 +10:00
Nick Moore	baa9c02c8b	Add a kw-only argument "dhcp" to wiznet5k object	2019-05-02 16:05:33 +10:00
Nick Moore	58d1d99701	Fix socket.recv() buffer length from `e23bad3a`	2019-05-02 13:13:56 +10:00
Dan Halbert	0113e0970e	add Display.__init__() args for brightness and auto_brightness	2019-04-18 15:59:16 -04:00
Dan Halbert	4fc0f8b25c	Turn off auto_brightness if brightness is set	2019-04-18 13:57:27 -04:00
Scott Shawcroft	bfbe9323ee	Merge pull request #1807 from pewpew-game/stage-cast-native Allow use of displayio.Display subclasses in _stage	2019-04-17 10:37:32 -07:00
Radomir Dopieralski	3a65ff970a	Allow use of displayio.Display subclasses in _stage	2019-04-17 17:21:34 +02:00
Dan Halbert	b5e283af68	Merge pull request #1808 from pewpew-game/gamepad-doc Update GamePad docs to include pull-downs	2019-04-17 11:06:19 -04:00
Dan Halbert	6684a3c723	Merge pull request #1778 from pewpew-game/gamepad-shift Add GamePadShift for handling shift-register-based buttons	2019-04-17 10:22:24 -04:00
Radomir Dopieralski	e46bf7e7c6	Update GamePad docs to include pull-downs	2019-04-17 11:18:30 +02:00
Scott Shawcroft	6132a05fd9	Include cleanup and style tweaks	2019-04-16 10:19:07 -07:00
Scott Shawcroft	0e03a321e4	Fully split gamepadshift from gamepad	2019-04-16 10:11:54 -07:00
Nick Moore	9c42a72275	Fix up single-byte access to nvm.ByteArray	2019-04-16 14:53:44 +10:00
Scott Shawcroft	c927e6b938	Split GamePadShift from GamePad to save space on most boards.	2019-04-15 15:40:06 -07:00
Radomir Dopieralski	eeef5359f9	Merge branch 'master' into gamepad-shift	2019-04-13 11:54:25 +02:00
Radomir Dopieralski	c0a553e90f	Add title to docs	2019-04-12 22:52:19 +02:00
Radomir Dopieralski	016efb5c68	Add GamePadShift to docs	2019-04-12 22:00:03 +02:00
Radomir Dopieralski	7aab3e8c93	Re-use an error message in _stage	2019-04-12 21:31:06 +02:00
Radomir Dopieralski	4dc286fa14	Reorganize the gamepad code	2019-04-12 20:43:29 +02:00
Radomir Dopieralski	049e80993d	Sync gampad_singleton with the long lived copy	2019-04-12 20:43:29 +02:00
Radomir Dopieralski	ae60968563	More refactoring	2019-04-12 20:43:29 +02:00
Radomir Dopieralski	7e89beeb31	Optimize the size of code for gamepad	2019-04-12 20:43:29 +02:00
Radomir Dopieralski	a7925930fa	Read one bit per system clock tick in GamePadShift	2019-04-12 20:43:29 +02:00
Radomir Dopieralski	6ff4e0ecb0	Add GamePadShift for handling shift-register-based buttons	2019-04-12 20:43:29 +02:00
Radomir Dopieralski	d39e7e7dd5	Use displayio.Display directly	2019-04-12 12:46:28 +02:00
Radomir Dopieralski	c3136f4f32	Enable displayio for uGame10 board Also, make the _stage library work with the fourwire bus, to re-use the display.	2019-04-12 01:10:57 +02:00
Scott Shawcroft	a152ac1cef	Merge remote-tracking branch 'adafruit/master' into pybadge_revd	2019-04-10 10:58:45 -07:00
Dan Halbert	c0c809ad4b	Fix version skew for bast_pro_mini build	2019-04-09 22:52:53 -04:00
Scott Shawcroft	5028f87b09	Tweak pybadge and fix display bugs * Update pybadge pins and flash for rev D * TileGrid now validates the type of the pixel_shader. * Display actually handles incoming subclass objects. * MicroPython will inspect native parents to see if special accessors are used.	2019-04-09 18:32:52 -07:00
Scott Shawcroft	72992070c5	Fix boards with no shared busses.	2019-04-09 11:36:10 -07:00
Scott Shawcroft	de48e4b262	Merge remote-tracking branch 'adafruit/master' into fix_cpx_display	2019-04-08 17:15:08 -07:00
Scott Shawcroft	5015036c06	Merge pull request #1758 from pewpew-game/fourwire-frequency Stop hard-coding SPI frequency in FourWire	2019-04-08 17:02:07 -07:00
Scott Shawcroft	0f003ac5b8	Reorganize board busses into shared-bindings and shared-module.	2019-04-08 16:58:50 -07:00
Radomir Dopieralski	8323721232	Stop hard-coding SPI frequency in FourWire Instead remember and use the frequency, polarity and phase that was set when the bus was first created.	2019-04-06 15:15:29 +02:00
Radomir Dopieralski	4b3cb7b6db	Expose displayio.Display.bus With the bus exposed, we can send custom commands to the display, to leverage advanced features specific to the display, which are not exposed by default.	2019-04-06 14:25:08 +02:00
Scott Shawcroft	7686f93ef4	Fix crash when getting board.SPI outside the VM If one of the default pins was already in use it would crash. The internal API has been refined to allow us to get the value without causing an init of the singleton. Fixes #1753	2019-04-05 19:06:37 -07:00
Scott Shawcroft	04a4e8a38d	Always check TileGrid's x, y When using an int index you could end up writing past the end of TileGrid's memory. Fixes #1747	2019-04-05 13:10:47 -07:00
Melissa LeBlanc-Williams	8f1fc6c07d	Added option to easily treat SPI parameter data as commands	2019-04-04 23:15:00 -07:00
Nick Moore	781d301bb6	Remove unnecessary MP_WEAK declarations	2019-04-02 13:33:22 +11:00
Nick Moore	f846fa109e	enable NRFX RTC adafruit/circuitpython#1046	2019-04-02 13:27:28 +11:00
Dan Halbert	0653bca323	Revert "Circuitpython nickzoic 1046 nrf rtc"	2019-03-29 16:41:29 -04:00
Melissa LeBlanc-Williams	e254597c24	Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix	2019-03-28 17:27:59 -07:00
Melissa LeBlanc-Williams	2e0268cb09	Simplified cs toggling into fourwire only	2019-03-27 20:17:22 -07:00
Melissa LeBlanc-Williams	f3ec0514cd	Simplified into fourwire only	2019-03-27 20:11:32 -07:00
Nick Moore	93684737eb	Fix up messages & wild stab at translations for adafruit/circuitpython#1046 The mysterious MP_WEAK linking bug still exists, thus the new message for 'set'.	2019-03-28 09:56:48 +11:00
Nick Moore	ff6395fa4e	workaround for problem with adafruit/circuitpython#1046 the __weak linking works fine so long as these functions are not identical. I have not yet worked out why.	2019-03-28 09:50:09 +11:00
Nick Moore	b09d2c3c62	enable NRFX RTC adafruit/circuitpython#1046	2019-03-28 09:50:09 +11:00
Melissa LeBlanc-Williams	2f7b338a4b	Comment Cleanup	2019-03-26 18:56:25 -07:00
Melissa LeBlanc-Williams	f4cede4747	Removed parameter so CS is always toggled	2019-03-26 18:46:13 -07:00
Melissa LeBlanc-Williams	b2ad16f5c8	Removed parameter so CS is always toggled	2019-03-26 18:34:07 -07:00
Melissa LeBlanc-Williams	5f0e71ccb4	Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix	2019-03-26 18:23:02 -07:00
Melissa LeBlanc-Williams	0df40534f3	Merge branch 'master' of https://github.com/adafruit/circuitpython	2019-03-26 18:22:30 -07:00
Scott Shawcroft	3f42a49a6b	Merge pull request #1674 from pewpew-game/bug1669 Properly calculate BPP for displayio.Bitmap	2019-03-26 15:49:42 -07:00
Scott Shawcroft	8ea5fedf19	Merge pull request #1682 from rhwlo/add-socket.recv_into shared-bindings/socket: add socket.recv_into	2019-03-26 14:28:07 -07:00
Radomir Dopieralski	d553df95b0	Reuse "Not connected" message in bleio	2019-03-25 21:41:40 +01:00
Radomir Dopieralski	81fe8060d7	Properly calculate BPP for displayio.Bitmap Fix #1669	2019-03-25 19:40:40 +01:00
Melissa LeBlanc-Williams	c3329e224d	Added Single Byte Boundaries option for certain displays	2019-03-24 23:59:28 -07:00
Radomir Dopieralski	cc6fb4595e	Reuse existing error message in busio.i2c Remove a period from the error message, so that the same message as in SPI and other places in I2C can be re-used.	2019-03-25 01:41:52 +01:00
Melissa LeBlanc-Williams	d9de1b9926	Updated RTD comment to reflect new param defaulting True	2019-03-24 08:23:46 -07:00
Melissa LeBlanc-Williams	0c33f7fdb4	Enable CS toggle for displayio by default	2019-03-23 20:23:23 -07:00
Melissa LeBlanc-Williams	2bb63cbeb3	Added new parameter description in displayio RTD comment	2019-03-23 18:53:04 -07:00
Melissa LeBlanc-Williams	fadb5a1024	Added option to toggle cs in displayio init sequence	2019-03-23 18:34:42 -07:00
Joshua Coats	e23bad3a3a	shared-bindings/socket: add socket_recv_into	2019-03-23 10:49:43 -07:00
Scott Shawcroft	4b0afc855d	Fix up sphinx	2019-03-19 18:37:41 -07:00
Scott Shawcroft	5e2fec714c	Move Glyph and BuiltinFont into fontio It was confusing in displayio. Fixes #1662	2019-03-19 16:22:09 -07:00
Dan Halbert	494a9d3825	Merge pull request #1640 from tannewt/final_displayio_changes Final displayio changes before 4.0.0	2019-03-13 18:24:04 -04:00
Dan Halbert	97140e6a62	wrong arg type for PWMOut variable_frequency	2019-03-12 21:28:30 -04:00
Scott Shawcroft	946790bfb5	Add better PewPew error messages and update translations	2019-03-12 17:21:15 -07:00
Scott Shawcroft	afbf59019e	Update displayio docs to add detail to display bus comments Fixes #1599	2019-03-12 17:18:33 -07:00
Scott Shawcroft	224e9b1009	Standardize TileGrid to x and y properties over position This brings it inline with Group. Also fixes #1613 This also includes a number of fixes for where a method is called through a subclass. We now correctly get the native object. Fixes #1567 Lastly, this adds subscript support to TileGrid for changing tile indices. Similar to Bitmap, it accepts ints or 2-tuples.	2019-03-12 17:18:33 -07:00
Scott Shawcroft	ea45877ca5	Accept x and y kwargs into Group for initial position.	2019-03-12 17:17:32 -07:00
sommersoft	a498bcd94d	add voice level getter	2019-03-12 16:10:54 -05:00
sommersoft	7aa0840b73	change voice 'gain' to 'level'	2019-03-12 10:24:54 -05:00
sommersoft	15a1647c5c	fix compilation with updated circuitpy_mpconfig and upstream changes	2019-03-11 18:30:56 -05:00
sommersoft	e2fd34d7cc	Merge branch 'dm-mixer' of https://github.com/adafruit/circuitpython into mixer_volume	2019-03-08 13:05:45 -06:00
Dan Halbert	1f31877d55	Rework background display task to allow reads from SPI SD card during display. Clarify code. Handle multiple displays better.	2019-03-07 00:08:16 -05:00
Dan Halbert	c854f6617a	check display-bus transaction status and act accordingly	2019-03-06 13:45:48 -05:00
Dan Halbert	2eaa98ad71	Merge pull request #1601 from penguindustin/master added height and width attributes for displayio	2019-03-06 12:43:55 -05:00
Dustin Mendoza	4145f87fcd	changed from mp_int_t to uint16_t	2019-03-05 21:25:09 -08:00
Dan Halbert	e6339656fc	Merge pull request #1614 from sommersoft/new_freq_in Add frequencyio.FrequencyIn	2019-03-04 15:56:48 -05:00
sommersoft	8de4cf6b10	update RTD documentation	2019-03-02 18:33:37 -06:00
Dustin Mendoza	9737a45b33	changed width and height to be properties	2019-03-02 14:50:10 -08:00
Bryan Siepert	945550f4bd	Fixed the OnDiskBitmap example to reflect code changes	2019-03-02 09:12:40 -08:00
sommersoft	a44bfc2730	Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in	2019-03-01 21:24:30 -06:00
Radomir Dopieralski	ea78417f7f	Improve documentation	2019-03-01 16:36:29 +01:00
Radomir Dopieralski	5d85d54026	Move the frozen pew.py into a submodule	2019-03-01 16:24:22 +01:00
Radomir Dopieralski	89b2788d11	Apply review fixes: * fix formatting * fix copyrights * fix CIRCUITPYTHON_GAMEPAD guards * add CIRCUITPYTHON_PEW guards to reset * fix module list order	2019-03-01 16:05:15 +01:00
Radomir Dopieralski	45fea86554	Rebase on top of CircuitPython 4.x	2019-03-01 14:59:21 +01:00
Radomir Dopieralski	59f63eaef6	Handle new buttons	2019-02-28 23:34:03 +01:00
Radomir Dopieralski	55b511a5d8	Use a dedicated timer	2019-02-28 23:33:37 +01:00
Radomir Dopieralski	88e40193ae	Add a _pew module	2019-02-28 23:32:58 +01:00
sommersoft	9d20380bd4	Merge branch 'master' into new_freq_in	2019-02-26 04:29:16 +00:00
sommersoft	4a9f05a44f	final re-glue; compiles now.	2019-02-25 21:22:52 -06:00
Dustin Mendoza	f127be4dd2	added height and width attributes for displayio	2019-02-25 16:39:20 -08:00
sommersoft	f602fa3d9f	fix init deps	2019-02-24 18:07:26 -06:00
Dan Halbert	8b6dc446d3	Remove bleio classes that aren't done yet.	2019-02-24 14:23:00 -05:00
sommersoft	a1060747f8	Merge branch 'new_master' into new_freq_in	2019-02-22 23:12:11 +00:00
Scott Shawcroft	daee83c10b	Fix mount doc	2019-02-21 13:23:02 -08:00
Scott Shawcroft	1a0596a2fb	Add option to disable the concurrent write protection This allows writing to the filesystem from the host computer and CircuitPython by increasing the risk of filesystem corruption.	2019-02-21 10:45:41 -08:00
Lionel Debroux	b0c2c3c756	A couple build fixes for mp_float_t = double (MICROPY_FLOAT_IMPL_DOUBLE). Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>	2019-02-17 11:21:48 +01:00
sommersoft	ea9200a042	starting again; initial addition of 'frequencyio.FrequencyIn'	2019-02-16 19:26:24 -06:00
Dan Halbert	a345ef28f2	finish Makefile refactoring; nrf builds work	2019-02-15 18:55:10 -05:00
Dan Halbert	5154e0581e	WIP: atmel-samd trinket build works	2019-02-15 00:28:20 -05:00
Dan Halbert	379258112a	Merge pull request #1548 from tannewt/shape_arg_check Arg check width and height into Shape.	2019-02-14 07:42:39 -05:00

... 15 16 17 18 19 ...

2021 Commits