djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
18,403 Commits 21 Branches 274 Tags 785 MiB
3d5c77c601
Commit Graph

1492 Commits

Author SHA1 Message Date
Scott Shawcroft
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev 
Refine iMX RT memory layout and add three boards
 2020-01-27 14:11:08 -08:00
Jeff Epler
c8f969feb5 samd: audio-dma: avoid memory allocations 
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations.  This was
enough to cause MemoryErrors with regularity.

By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
 2020-01-27 08:49:41 -06:00
Jeff Epler
cb6193bbc7 samd: When possible, use one DMA channel for stereo AudioOut 
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time.  This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half.  (the number of bytes transferred
remains the same, though)

In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values.  However, this is the
case that matters for stereo mp3 playback on PyGamer.

Testing performed: Listened to some tracks with good stereo separation.
 2020-01-26 15:36:24 -06:00
Dan Halbert
6f13979c9b pygamer and pybadge boards were not resetting neopixels 2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6 2020-01-23 12:32:19 -05:00
ndgarage
4675783545 change-name-to-ndgarage_ndbit6 2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc init nfc copy 2020-01-22 20:30:33 -06:00
Dan Halbert
4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8 Merge remote-tracking branch 'origin/master' into capablerobot-usbhub 2020-01-20 13:11:57 -05:00
Scott Shawcroft
1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Scott Shawcroft
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm 
nrf: Add bonding to BLE pairing support
 2020-01-15 16:11:09 -08:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed 
CircuitPython support for the Open Book
 2020-01-15 17:21:19 -05:00
dalegrover
d6e657b593 Initial commit. 2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247 add support for the Open Book 2020-01-14 16:34:46 -05:00
scs217
50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217
18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217
c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Dan Halbert
2a75196aa3 merge from adafruit/circuitpython 2020-01-13 18:15:32 -05:00
Dan Halbert
189f2d5f07 Make requiring I2C pullups be optional 2020-01-09 17:31:50 -05:00
Scott Shawcroft
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes 
Fixes for JEplayer
 2020-01-08 12:50:13 -08:00
Scott Shawcroft
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2 
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
 2020-01-07 12:08:59 -08:00
Radomir Dopieralski
59ded1131f Take display offsets for PewPew M4 from the bootloader config 
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
 2020-01-06 14:24:30 +01:00
Marius-450
3ad3d49959 changes only for monster m4sk 2020-01-04 12:32:49 -05:00
Dan Halbert
242d572470 wip 2020-01-03 10:24:07 -05:00
Jeff Epler
bd8650d35b samd/peripherals: take upstream update 2020-01-02 17:55:50 -06:00
Dan Halbert
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update 
Update the PewPew M4 board and circuitpython-stage
 2020-01-01 13:59:02 -05:00
Scott Shawcroft
0223589e6c
Fix default UART too 2019-12-30 11:34:51 -08:00
Scott Shawcroft
e1d026f815
Update pins.c 2019-12-30 11:33:04 -08:00
hathach
62c4028cde
sync with https://github.com/hathach/tinyusb/pull/246 
should fix slow enumeration
 2019-12-26 23:04:16 +07:00
Jeff Epler
5aa3e3eabb samd/peripherals: update 2019-12-24 09:36:19 -06:00
Radomir Dopieralski
b06057395b Update PewPew M4 
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
 2019-12-23 18:37:36 +01:00
Scott Shawcroft
f60b6481e0
Turn off gamepad on cpx crickit 2019-12-20 12:14:27 -08:00
Scott Shawcroft
b859e2b710
Remove re from CPX Displayio build to make space. 2019-12-20 11:43:56 -08:00
Jeff Epler
d31a387ace circuitplayground_express_displayio: reduce inlining to make .ko translation fit 2019-12-19 16:11:29 -06:00
ndgarage
16688180c6 add-ndbit6 2019-12-19 07:17:43 -07:00
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk 2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk 2019-12-16 12:18:16 +05:00
Dan Halbert
e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
Dan Halbert
ae64a669dd address review comments 2019-12-11 15:43:06 -05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Jeff Epler
a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Jeff Epler
1905d0746d samd: neopixel: Fix neopixels after #2297 
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.

This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)

Testing performed on a Metro M4:
 * measured timings using o'scope and found all values within
   datasheet tolerance.
 * Drove a string of 96 neopixels without visible glitches
 * on-board neopixel worked

Testing performed on a Circuit Playground Express (M0):
 * Color wheel code works on built-in neopixels
 * Color wheel code works on 96 neopixel strip

As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)

Closes: #2297
 2019-12-07 19:19:45 -06:00
Dan Halbert
d628d2a261 atmel-samd working 2019-12-06 15:18:20 -05:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Scott Shawcroft
fce81e6868
Merge pull request #2297 from jepler/tick-refactor 
Call background tasks only once per ms
 2019-12-02 16:45:51 -08:00
Jeff Epler
002f5c0f1c samd: trinket_m0: make board fit again 2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9 2019-12-02 07:27:03 -06:00
Jeff Epler
95d9c49e43 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-29 11:27:09 -06:00
Jeff Epler
d843156a5e samd: Consolidate small build optimization flags 
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
 2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a Squeeze pyruler zh_Latn_pinyin 2019-11-27 14:47:35 -05:00
Dan Halbert
b32a9192df make UART.write be blocking on SAMD; add timeout property 2019-11-27 13:05:29 -05:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master 
Add shIRtty board
 2019-11-26 15:23:56 -05:00
Dan Halbert
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name 
Set USB_INTERFACE_NAME for winterbloom_sol
 2019-11-26 15:17:14 -05:00
Thea Flowers
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol 2019-11-26 10:59:12 -08:00
Thomas Sarlandie
2647ea0754 fix: disable touchio to save some space 2019-11-26 19:26:18 +01:00
Scott Shawcroft
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space 
Once we use PixelBuf, the library will be much smaller.
 2019-11-26 09:31:44 -08:00
Jeff Epler
82f55dc046 atmel-samd: reduce inlining on constrained boards again 
pewpew10, pirkey_m0, and uchip all fit now.  However, pirkey_m0
now has just 76 bytes flash available.
 2019-11-26 08:50:55 -06:00
Jeff Epler
3ed6de7baf atmel-samd: reduce inlining on pyruler again 
By tweaking the optimizer flags further, this build also fits
 2019-11-26 08:50:55 -06:00
Jeff Epler
2e4a6b94e7 atmel-samd: get most constrained m0 builds to work again 
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
 2019-11-26 08:50:45 -06:00
Thomas Sarlandie
11dc572bce feature: our own PID - thanks @ladyada 2019-11-25 21:56:42 +01:00
Thomas Sarlandie
fc71ed9789 add shirtty board - hackaday supercon 2019 addon 2019-11-25 17:44:41 +01:00
Dan Halbert
1ccb7b4c5e cosmetic commit, mostly to re-run 2019-11-22 16:30:10 -05:00
Dan Halbert
13375d16f1 change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
Jeff Epler
77b78d7fb9 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-22 14:28:51 -06:00
Dan Halbert
e18d3e0f76 Merge branch 'master' into m4-network-ps2io 2019-11-22 15:02:52 -05:00
Dan Halbert
1a62a9cb17 remove network from kicksat_sprite 2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700 turn off network in pewpew_m4 2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874 Merge remote-tracking branch 'adafruit/master' into testing-fixes 2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5 enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00
wallarug
fce7b89087 removed Robo HAT MM1 M0 board. 2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719 add-ndbit6 2019-11-19 14:52:09 -07:00
Jeff Epler
40a47d41df samd: background: Allow monitoring time taken in background task 
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
 2019-11-18 11:01:24 -06:00
Jeff Epler
7f744a2369 Supervisor: move most of systick to the supervisor 
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports.  This mostly would
have broken gamepad tick support on non-samd ports.

The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read.  Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).

Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.

Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
 2019-11-18 11:01:23 -06:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description 
... to "StringCarM0Ex"
 2019-11-16 16:40:40 -08:00
Hierophect
81223c76bd revert error 2019-11-15 13:04:25 -05:00
Hierophect
2c6781f74d move neopixel_in_use flag to shared-bindings 2019-11-15 12:59:52 -05:00
Hierophect
de5691acf5 Add never_reset and reset to pin common hal, adjust files 2019-11-15 12:47:00 -05:00
KalbeAbbas
8134ceec83
Update pins.c 2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c 2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c 2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f updated 2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11 
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. 
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
 2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator 
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
 2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf Add board configuration for Winterbloom Sol 2019-11-04 23:11:42 -08:00
Scott Shawcroft
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c 
nrf: allocate two I2C on CPB
 2019-11-03 13:15:36 -08:00
Dan Halbert
85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
brentru
2f04c5891f flip it around 2019-10-31 14:11:50 -04:00
brentru
ab3da3071c flip MADCTL BGR bit to reflect RGB colors 2019-10-31 10:11:47 -04:00
ladyada
d2b613134d we should use native rotation, and tweak madctl (not done yet) 2019-10-29 22:53:44 -04:00
ladyada
1e869d1334 switch to 8-bit mode - tested on hardware! 2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f wip 2019-10-28 18:15:02 -04:00
Dan Halbert
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086 
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
 2019-10-28 14:50:01 -04:00
Thea Flowers
4b742f88d9
Fix spelling 2019-10-25 10:50:27 -07:00
Thea Flowers
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors 
Fixes #2086

When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
 2019-10-23 14:34:14 -07:00
ProductDev
4cd5571203 Adds builds for sparkfun_qwiic_micro with and without flash 2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Kamil Tomaszewski
96756b3945 Add functions to get top and limit stack 2019-10-18 11:04:45 +02:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX 2019-10-17 18:02:05 +11:00
Scott Shawcroft
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master 
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
 2019-10-15 09:46:39 -07:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder 2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs 2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions 2019-10-14 11:55:22 -07:00
Dan Halbert
c1ab2486f9 return chip vcc value 2019-10-12 15:42:15 -04:00
Chris Osterwood
137a4f8a5d Added new flash SKU for production hardware 2019-10-07 14:50:39 -04:00
Kamil Tomaszewski
7aefcc449a Add an alternative way to number the USB endpoints 
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
 2019-10-07 12:31:42 +02:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production 
Robo HAT MM1 - Fixes after testing
 2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a serpente: Update PID and enable as many modules as we can fit 2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb fix spi 2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3 fixed SPI on M4 2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0 updated robohatmm1_m0 2019-09-26 20:02:09 +10:00
wallarug
39265fccf3 included a version number 2019-09-26 19:22:51 +10:00
wallarug
db9495b04b updated board name 2019-09-26 19:21:53 +10:00
wallarug
08b0f80879 updated board name 2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0 remove frozen busio library 2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682 updated pins.c 2019-09-26 19:18:50 +10:00
wallarug
70860e1352 robohatmm1 removed uart and put in correct order 2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b Added TFT pins to HalloWing M4 for code compatibility 2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
b7598f7058 Merge branch 'master' of https://github.com/adafruit/circuitpython 2019-09-19 14:20:28 -07:00
Scott Shawcroft
0fed65e7d2
Merge remote-tracking branch 'adafruit/master' into dac51 2019-09-19 12:21:54 -07:00
Melissa LeBlanc-Williams
341428b4da Added SPEAKER pin to HalloWing M4 for code compatibility 2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9 Added TOUCH pins to HalloWing M4 for code compatibility 2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support 2019-09-17 10:40:07 -07:00
jepler
dffedd7c86 samd: peripherals: update submodule reference 2019-09-16 21:48:31 -05:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master 
Add support for Serpente boards
 2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language 2019-09-16 11:51:46 +02:00
jepler
61698eb5d8 AnalogOut / AudioOut: Copy settings from Arduino 
Make changes in asf4_conf even though I think in these cases the
"peripherals" submodule is running the show.

Arduino clocks the DAC at 12MHz but uses the CCTRL setting for
clocking < 1.2MHz (100kSPS).

A fresh clock (6) is allocated for the new 12MHz clock.  This matches
the Arduino value, though not the GCLK index.

Modify other settings to more closely resemble Arduino.

In AudioOut, actually clock the waveform data from the timer we set up
for this purpose.

This gives good waveforms when setting AnalogOut full-scale in a loop,
but the rise/fall of waveforms that come from AudioOut are still erratic.
Weirdly, if AudioOut limits its range even slightly (e.g., to 1000..64000)
then the erratic

Note that this will require https://github.com/adafruit/samd-peripherals/pull/26
to be accepted for the submodule update here to work.
 2019-09-15 11:30:49 -05:00
Kattni Rembor
c94310411b Update board def, enable touchio 2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e Add support for Serpente boards 2019-09-14 16:06:28 +02:00
Dan Halbert
b8200d7295 fix atmel-samd filesystem_tick'ing; clear_temp_status() should check for status indicator in use 2019-09-09 23:17:52 -04:00
Scott Shawcroft
8066810abb
Merge pull request #2091 from jepler/samd-dma-tracking 
Samd dma tracking
 2019-09-05 11:27:59 -07:00
Scott Shawcroft
c5caacafdd
Merge pull request #2100 from pewpew-game/pewpew_m4 
Add support for PewPew M4 board
 2019-09-05 11:26:47 -07:00
Radomir Dopieralski
d50ed3b6e7 Add support for PewPew M4 board 2019-09-05 10:50:33 +02:00
Dan Halbert
f3af2a6fb7 Merge remote-tracking branch 'adafruit/master' into choose-usb-devices-xac 2019-09-04 21:56:13 -04:00
Dan Halbert
195de97c67 use only one endpoint pair for MSC except on SAMD21 2019-09-04 21:45:16 -04:00
Dan Halbert
fca440fb66
Merge pull request #2113 from tannewt/displayio_hidden 
Add .hidden to TileGrid and Group
 2019-09-04 15:48:00 -04:00
Scott Shawcroft
7951646b9a
Disable bitbangio on uGame10 2019-09-04 11:49:47 -07:00
sommersoft
c4d6f4f536 disable 'audiomixer' for all M0 boards 2019-09-01 17:39:20 -05:00
sommersoft
8120f5cdad Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice 2019-08-29 22:14:53 -05:00
Scott Shawcroft
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x 2019-08-29 14:38:16 -07:00
Scott Shawcroft
0aa5507c4c
add additional pin aliases 2019-08-29 13:41:28 -07:00
Scott Shawcroft
84839de56f
Hallowing M4 2019-08-29 10:34:46 -07:00
jepler
30a9346373 samd: audio_dma: Track channel allocation 
Previously, we depended on allocated channels to always be
"dma_channel_enabled".  However, (A) sometimes, many operations
would take place between find_free_audio_dma_channel and
audio_dma_enable_channel, and (B) some debugging I did led me to believe
that "dma_channel_enabled" would become false when the hardware ended
a scheduled DMA transaction, but while a CP object would still think it
owned the DMA channel.

((B) is not documented in the datasheet and I am not 100% convinced that
my debugging session was not simply missing where we were disabling the
channel, but in either case, it shows a need to directly track allocated
separately from enabled)

Therefore,
 * Add audio_dma_{allocate,free}_channel.
   * audio_dma_free_channel implies audio_dma_disable_channel
   * track via a new array audio_dma_allocated[]
 * clear all allocated flags on soft-reboot
 * Convert find_free_audio_dma_channel to audio_dma_allocate_channel
   * use audio_dma_allocated[] instead of dma_channel_enabled() to check
     availability
 * remove find_free_audio_dma_channel
 * For each one, find a matching audio_dma_disable_channel to convert
   to audio_dma_free_channel

Closes: #2058
 2019-08-28 17:00:22 -05:00
jepler
0b00787b4d samd: AudioOut: ensure stopped before deinit 
.. otherwise, a sequence like
    >>> a = audioio.AudioOut(board.A0)
    >>> a.play(sample, loop=True)
    >>> a.deinit()
would potentially leave related DMA channel(s) active.
 2019-08-28 16:43:55 -05:00
Scott Shawcroft
0876d5c4ad
Disable bitbangio on Itsy M0 
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
 2019-08-27 15:21:47 -07:00
sommersoft
696117b048 disable audiomixer on boards it doesn't fit on 2019-08-25 14:53:34 -05:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review 2019-08-23 15:27:21 -07:00
Scott Shawcroft
b992ca80e7
Rejigger builds to fit under 50 minute limit 2019-08-22 20:29:58 -07:00
Scott Shawcroft
72e7ffa324
More cleanup 2019-08-22 16:16:09 -07:00
Scott Shawcroft
fd8050b369
Turn off features to make room for ePaper 2019-08-22 15:19:45 -07:00
Scott Shawcroft
9993a99906
Add initial Monster M4SK build 2019-08-22 14:24:32 -07:00
Scott Shawcroft
3a98de1236
Add reset() to display busses to detect whether it works 2019-08-22 14:23:33 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out 
NOT TESTED! Just compiles

Fixes #1691
 2019-08-22 14:23:27 -07:00
Scott Shawcroft
c247e7df9c
Begin refresh rework. 2019-08-22 14:08:33 -07:00
Scott Shawcroft
70680d5b22
EPaper displays work mostly. 2019-08-22 14:08:33 -07:00
Dan Halbert
7cc15e56c8 make translate 2019-08-22 15:20:23 -04:00
Scott Shawcroft
6aa311aabd
Merge pull request #2027 from dastels/displayio_fill_area 
To displayio.Display: expose fill_area and add a property for rotation
 2019-08-21 23:48:21 -07:00
Dave Astels
d547d59cba Merge remote-tracking branch 'adafruit/master' into displayio_fill_area 2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263 Make room 2019-08-21 14:46:10 -04:00
Dan Halbert
6e3a6d0ac5 typo in IncrementalEncoder.c 2019-08-20 16:23:17 -04:00
Dan Halbert
e00696de7f merge from upstream and make translate 2019-08-20 13:06:23 -04:00
Dan Halbert
e3dc5e3a66 Merge remote-tracking branch 'adafruit/master' into run-background-tasks 
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
 2019-08-19 12:41:20 -04:00
Dan Halbert
e2a4c76a37 make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00
Scott Shawcroft
583392a5c6
Merge pull request #2046 from brentru/add-pyportal-titano 
Add PyPortal Titano
 2019-08-12 16:01:10 -07:00
Jeff Epler
d9ee2d28a0 atmel-samd: Use RUN_BACKGROUND_TASKS 2019-08-11 08:53:02 -05:00
brentru
5a8846d33c remove cruft from prv board 2019-08-08 15:12:01 -04:00
brentru
f87f48ab88 adding pyportal titano board definition 2019-08-08 14:56:28 -04:00
Chris Osterwood
d5658860aa Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping. 2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e Merge branch 'master' into capablerobot-usbhub 2019-08-08 14:14:23 -04:00
Jeff Epler
33b949abfa samd: audio_dma, audio_background: Gate with CIRCUITPY_ defines 
Some ports which actually don't have audioio or audiobusio were still
calling into audio_dma_background().  This wasn't an error until
the assignment to audio_dma_state in audio_dma_stop was added, though
it's not clear why.
 2019-08-07 21:29:24 -05:00
Jeff Epler
500d1bb168 samd: audio_dma.c: Remove exceptions, just return early 
These were most useful debugging, but because this code can be reached
"outside of the VM", it's not actually permitted to throw exceptions here.
 2019-08-07 20:20:36 -05:00
brentru
1d4700cb6c add pindefs for tft and tft control 2019-08-07 18:29:20 -04:00
brentru
8f6eac98f3 add defs for pyportal titano 2019-08-07 17:10:31 -04:00
Jeff Epler
39c64bf83c samd: audio_dma_stop: don't free invalid channel 
audio_dma_stop can be reached twice in normal usage of AudioOut.

This may bear further investigation, but stop it here, by making the
function check for a previously freed channel number.  This also prevents
the event channel from being disabled twice.

The first stop location is from audio_dma_get_playing, when the buffers
are exhausted; the second is from common_hal_audioio_audioout_stop when
checking the 'playing' flag.
 2019-08-06 22:00:31 -05:00
Jeff Epler
8b717955ba samd: audio_dma: wrap dma_{en,dis}able_channel and add error checking 
It turns out the "disable" error will fire in practice, we'll fix that
next.
 2019-08-06 22:00:31 -05:00
Jeff Epler
6253f11503 samd: audio_dma_stop: Clear out audio_dma_state[] 
As identified in #1908, when both AudioOut and PDMIn are used, hard
locks can occur.  Because audio_dma_stop didn't clear audio_dma_state[],
a future call to audio_dma_load_next_block could occur using a DMA
object which belongs to PDMIn.

I believe that this Closes: #1908 though perhaps it is still not the full
story.

Testing performed: Loaded a sketch similar to the one on #1908 that
tends to reproduce the bug within ~30s.  Ran for >300s without hard
lock.  HOWEVER, while my cpx is no longer hard locking, it occasionally
(<1 / 200s) announces
    Code done running. Waiting for reload.
(and does so), even though my main loop is surrounded by a 'while True:'
condition, so there are still gremlins nearby.
 2019-08-06 21:34:21 -05:00
Scott Shawcroft
eee759455a
Merge pull request #2018 from keith-packard/snekboard 
Add board support for keithp.com SnekBoard
 2019-07-31 16:38:51 -07:00
Scott Shawcroft
366fdcce18
Merge pull request #2011 from tannewt/ssd1322 
Add knobs for SSD1322 and two displayio fixes.
 2019-07-30 14:15:37 -07:00
Scott Shawcroft
9dd56b1566
Merge branch 'master' into snekboard 2019-07-30 14:12:08 -07:00
wallarug
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld 2019-07-30 19:48:35 +10:00
wallarug
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file 2019-07-30 19:13:33 +10:00
Keith Packard
c6e4ddc88a boards/snekboard: Delete SPI object reference 
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:45:52 -07:00
Keith Packard
9a37c8a4b3 boards/snekboard: Add pin aliases for UART and I2C 
Allow users to use TX/RX and SDA/SCL names.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:45:06 -07:00
Keith Packard
4387ecfdfb Update snekboard PID to official value 
Snekboard has been assigned the following PIDs:

	PID 0x004D  # bootloader
	PID 0x804D  # arduino
	PID 0x804E  # circuitpython

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:15:18 -07:00
Keith Packard
326df70ac2 Fix snekboard names 
Manufacturer -- keithp.com
Product -- snekboard

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:15:18 -07:00
Keith Packard
56f710f64f Add board support for keithp.com SnekBoard 
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:14:37 -07:00
wallarug
dc1eb73ee7
Merge branch 'master' into wallarug-robohat 2019-07-29 21:53:49 +10:00
wallarug
8974c7e843
Added BUTTON to pins.c 2019-07-29 16:37:53 +10:00
wallarug
9e0bea405d
Added BUTTON to pins.c 2019-07-29 16:37:21 +10:00
wallarug
4d30efdc2a
Updated pins.c for GROVE. 2019-07-29 16:29:48 +10:00
wallarug
8838e25cb2
Update pins.c 2019-07-29 16:28:35 +10:00
sommersoft
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards 
Add check to travis to make sure new boards are built, fix #1886
 2019-07-28 22:41:59 -05:00
wallarug
0f30070d58 updated naming schema to match other boards 2019-07-27 17:44:42 +10:00
wallarug
b06fa48735 updated a few files 2019-07-27 16:59:07 +10:00
wallarug
9c57f52d1e updated pins.c for robohat 2019-07-27 16:56:03 +10:00
wallarug
24e84adc6d further robohat cleanups 2019-07-27 16:38:47 +10:00
wallarug
e2b83e2dd9 minor changes robohat d21 2019-07-27 16:36:13 +10:00
wallarug
36008de2ed added custom ld file for samd51 no crystal, ext flash 2019-07-27 16:29:30 +10:00
wallarug
eda3423e35 updated to v1.7 board (samd51) 2019-07-27 16:27:41 +10:00
Scott Shawcroft
c61c874a6d
Reduce feather_m0_supersized build size 
Make it match feather_m0_express
 2019-07-26 00:31:41 -07:00
Scott Shawcroft
a87094e01f
Turn off GC opt to save space on Trinket Haxpress 2019-07-25 22:56:46 -07:00
Scott Shawcroft
4e7de436b4
Update constructors of boards with displays 2019-07-25 22:48:11 -07:00
Jeff Epler
6b44e40ee8 audiocore: Factor from audioio 
When nrf pwm audio is introduced, it will be called `audiopwmio`.  To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.

INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
 2019-07-25 06:44:26 -05:00
Dan Halbert
82ab998cd5
Merge pull request #1998 from tannewt/monocolor 
Add support for grayscale displays
 2019-07-22 22:30:28 -04:00
Scott Shawcroft
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1 
Update Arch Linux ARM compiler installation instructions
 2019-07-22 19:29:53 -07:00
Scott Shawcroft
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro 2019-07-19 16:11:13 -07:00
Scott Shawcroft
b9b9ef227f
Turn off bitbanging on Hallowing to save code space. 2019-07-19 16:10:33 -07:00
Scott Shawcroft
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space. 2019-07-19 16:10:32 -07:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth. 
This also improves Palette so it stores the original RGB888 colors.

Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.

Fixes #1828. Fixes #1956
 2019-07-19 16:06:11 -07:00
Kattni Rembor
582acdaa0a Requested changes. 2019-07-09 16:12:24 -04:00
Kattni Rembor
d905958db1 Adding PyRuler to CircuitPython. 2019-07-09 16:02:39 -04:00
Scott Shawcroft
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum 
Add support for boards in the datum series.
 2019-07-09 09:33:13 -07:00
Scott Shawcroft
f4a64a2e80
Merge pull request #1989 from rce1086/master 
Added conditional compilation around selection of TX pad candidates
 2019-07-08 14:07:04 -07:00
Carl Elkins
64507207da Added conditional compilation around selection of TX pad candidates 
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
 2019-07-08 02:08:39 +01:00
jandjstudios
46b7575550 Initial commit to support boards in the datum series. 2019-07-06 13:41:03 -07:00
iot49
4c72a3991e updated samd and esp8266 ports 2019-07-05 10:01:51 -07:00
Anthony DiGirolamo
55f15e3c05
Update Arch Linux ARM compiler installation instructions 
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient

Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/) as an optional package. Without it users will get errors about missing header files like:

```
In file included from asf4/samd51/include/samd51j19a.h:49,
                 from asf4/samd51/include/sam.h:38,
                 from ./mpconfigport.h:31,
                 from ../../py/mpconfig.h:45,
                 from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
    9 | # include_next <stdint.h>
      |                ^~~~~~~~~~
compilation terminated.
```
 2019-07-04 11:14:50 -07:00
Chris Osterwood
97e7fea517 Change pin names to be more descriptive 2019-07-04 13:23:57 -04:00
Chris Osterwood
539502c891 Remove pin reservations. Prevents used from inside of CircuitPython code 2019-07-04 13:22:36 -04:00
Radomir Dopieralski
e45eac5016 Switch the terminal font for ugame10 
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).

It might make sense to also use that font in other boards.
 2019-07-01 23:05:07 +02:00
Scott Shawcroft
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402 2019-06-27 14:06:26 -07:00
Scott Shawcroft
fe507db45f
Shrink pIRkey build down. 
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
 2019-06-26 16:49:23 -07:00
Scott Shawcroft
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced 
Add PyGamer Advance and fix Joystick pins
 2019-06-19 12:32:36 -07:00
Scott Shawcroft
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage 
Add support for PyGamer to Stage library
 2019-06-18 18:23:08 -07:00
Scott Shawcroft
352bf7eaf5
Add PyGamer Advance and fix Joystick pins 2019-06-18 12:22:20 -07:00
Radomir Dopieralski
5803245009 Add support for PyGamer to Stage library 2019-06-18 19:05:51 +02:00
Scott Shawcroft
2dddccb99e
Update board inits for new api. 2019-06-17 18:03:30 -07:00
brentru
ea2c068e11 COLMOD is 1 param, remove CASET/RASET in CircuitPython 2019-06-17 11:20:25 -04:00
brentru
207dc885a6 removed incorrect gamma code, looks better now 2019-06-14 16:34:30 -04:00
brentru
4092294e7c tft working init. sequence, still undersaturated 2019-06-14 16:17:05 -04:00
brentru
0bc74172a2 Add pybadge airlift, sans-tft 2019-06-14 14:46:19 -04:00
Scott Shawcroft
0b1f605a9b
Turn off gc opt for more M0 boards 2019-06-12 13:20:21 -07:00
Scott Shawcroft
a91ad05774
Change to one lto partition for ultimate optimization. 2019-06-12 11:37:46 -07:00
Scott Shawcroft
eb21fc3e31
Add partial display update support. 
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.

Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.

This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.

Fixes #1169. Fixes #1705. Fixes #1923.
 2019-06-12 11:32:39 -07:00
Dan Halbert
ba1b36a800 Uncomment vm.c SUPEROPT (debugging typo); trim a few builds 2019-06-12 13:09:09 -04:00
Dan Halbert
1bb4fccc3b Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files 2019-06-12 11:08:22 -04:00
Dan Halbert
0b3f29780a shrink a bunch of builds to fit 2019-06-11 18:46:06 -04:00
Dan Halbert
4fc189b60c Merge latest 4.0.x fixes into master 2019-06-11 16:16:29 -04:00
shazz
9c49af0597 Added pin for SD CS 2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter
1da8d4b4da Add PS/2 support -- ps2io module 2019-06-04 18:05:46 -03:00
Dan Halbert
bcda5e133d
Merge pull request #1903 from tannewt/get_area 
Rework the pixel computation to use areas
 2019-05-31 21:27:06 -04:00
Dan Halbert
4e85c1ef91 Implement forced clean builds for boards so designated. 
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.

Fixes #1910.
 2019-05-24 15:32:24 -04:00
Dan Halbert
e84f3b1c6a make crickit cpx pinyin build fit 2019-05-23 21:22:50 -04:00
Scott Shawcroft
3fad7de8db
Rework the pixel computation to use areas 
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
 2019-05-21 17:41:06 -07:00
Dan Halbert
0199d9810b Make pinyin fit on cpx 2019-05-21 15:18:56 -04:00
Dan Halbert
008bbc944c correct USB PIDs for several boards 2019-05-16 10:54:15 -04:00
Scott Shawcroft
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub 
Added board definition for Capable Robot Programmable USB Hub
 2019-05-14 13:42:51 -07:00
Chris Osterwood
a0497553fc Fix to prevent critical pins from being reset when MCU restarts or enters REPL 2019-05-14 15:23:33 -04:00
Chris Osterwood
420dbafa9d Added board definition for Capable Robot Programmable USB Hub 2019-05-14 13:28:24 -04:00
sabas1080
9f082ba5cb Fix pin lost 2019-05-13 10:18:53 -05:00
Scott Shawcroft
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech 
Add Escornabot Makech of Electronic Cats
 2019-05-10 12:39:58 -07:00
sabas1080
d174ce8821 Update pins define 2019-05-10 13:34:02 -05:00
Scott Shawcroft
67007282c9
Tighten down inlining on the pIRkey 2019-05-10 11:19:27 -07:00
Scott Shawcroft
80a752da87
Merge latest adafruit/master in. 2019-05-10 10:09:56 -07:00
sabas1080
27ea1df710 Init escornabot 2019-05-08 15:48:17 -05:00
Scott Shawcroft
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith 
avoid double float arithmetic in FrequencyIn
 2019-05-08 14:40:18 -04:00
sabas1080
08a170388d fix VID and PID inverted 2019-05-08 10:09:49 -05:00
Dan Halbert
f59dadbb4f avoid double float arithmetic in FrequencyIn 2019-05-07 00:25:22 -04:00
ladyada
ed8e6e8f45 re-add i2s (its J not G!) 2019-04-29 20:30:53 -04:00
ladyada
fa3a52bc1e similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :) 2019-04-29 20:29:48 -04:00
wallarug
aa3c28787c removed problem libraries from frozen build. 2019-04-28 00:09:13 +10:00
wallarug
b4a70daf17 updated lots 2019-04-27 22:35:12 +10:00
wallarug
cd4aaa13a3 added robohatmm1 board defs. 2019-04-25 21:13:41 +10:00
ladyada
9b593cd154 update periph submodule 2019-04-23 18:20:13 -04:00
ladyada
a5697470e1 fix up pybadge for final release board (swap backlite and reset) 2019-04-23 16:43:20 -04:00
Scott Shawcroft
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker 
Turn off auto_brightness if brightness is set
 2019-04-18 15:48:39 -07:00
Dan Halbert
0113e0970e add Display.__init__() args for brightness and auto_brightness 2019-04-18 15:59:16 -04:00
Scott Shawcroft
f7c7904e2b
Correct call structure for throwing errors 2019-04-17 13:54:29 -07:00
Carlos
71c4f100de
Update translations and use same error for PDM too 2019-04-17 11:28:43 -07:00
Carlos
5865b28592
[audiobusio-I2SOut] Fix translation error 2019-04-17 11:12:38 -07:00
Carlos
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg 2019-04-17 11:12:38 -07:00
Carlos
9f63125345
Fix I2SOut message, fix #1765 2019-04-17 11:12:38 -07:00
Dan Halbert
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift 
Add GamePadShift for handling shift-register-based buttons
 2019-04-17 10:22:24 -04:00
Scott Shawcroft
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift 2019-04-16 11:23:41 -07:00
Scott Shawcroft
55782901d0
Actually call gamepadshift_tick 2019-04-16 11:15:42 -07:00
Scott Shawcroft
f58446e937
Merge branch 'master' into master 2019-04-16 10:32:38 -07:00
Scott Shawcroft
0e03a321e4
Fully split gamepadshift from gamepad 2019-04-16 10:11:54 -07:00
ITACA Innovation S.R.L
2d303213ed Add files via upload 2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L
4f5a7ffe46 Updates: VID&PID, pinout 
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
 2019-04-16 16:45:47 +02:00
Scott Shawcroft
c927e6b938
Split GamePadShift from GamePad to save space on most boards. 2019-04-15 15:40:06 -07:00
Scott Shawcroft
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage 
Enable _stage module and freeze stage library on the PyBadge
 2019-04-15 14:25:50 -07:00
Radomir Dopieralski
ade6bd8185 Enable _stage module and freeze stage library on the PyBadge 2019-04-15 14:38:02 +02:00
siddacious
5135ee52d9 Changing to support for CP32-M4 wrover 2019-04-14 19:45:44 -07:00
Radomir Dopieralski
eeef5359f9 Merge branch 'master' into gamepad-shift 2019-04-13 11:54:25 +02:00
Dan Halbert
f8473f4a39
Merge pull request #1788 from tannewt/pinyin 
Add Chinese (Pinyin) and slim down boards so it fits
 2019-04-12 20:36:59 -04:00
Scott Shawcroft
defc6dceb0
Slim down feather m0 express 2019-04-12 16:18:08 -07:00
Scott Shawcroft
796fc3f5ab
Update font location and shrink a bunch of builds 2019-04-12 15:25:48 -07:00
Scott Shawcroft
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio 
Enable displayio for the ugame10 board
 2019-04-12 13:26:51 -07:00
Scott Shawcroft
7161038d6b
Turn off displayio because it is a satellite 2019-04-12 11:54:32 -07:00
Radomir Dopieralski
0599286e32 Use never_reset in ugame10 2019-04-12 20:45:52 +02:00
Radomir Dopieralski
947662415c Disable gamepad for feather_m0_express_crickit 2019-04-12 20:43:29 +02:00
Max Holliday
41499ac315
No I2S on G19 2019-04-12 10:06:17 -07:00
Max Holliday
e85b6fb83c
adding kicksat-sprite board 
See https://github.com/RoboticExplorationLab/sprite for details
 2019-04-12 10:06:17 -07:00
Radomir Dopieralski
dabbded622 Got back to using Display object in the Stage library 2019-04-12 11:19:19 +02:00
Radomir Dopieralski
c3136f4f32 Enable displayio for uGame10 board 
Also, make the _stage library work with the fourwire bus, to re-use the
display.
 2019-04-12 01:10:57 +02:00
Radomir Dopieralski
5603d0cd38 Configure the TFT spi to 24MHz by default 
That is (slightly) out of spec for the display, but it works reliably.
 2019-04-11 15:47:26 +02:00
Scott Shawcroft
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline. 2019-04-10 14:09:14 -07:00
ladyada
894c1e9590 Rev D/E (beta) hardware! 2019-04-10 08:37:20 -04:00
Dan Halbert
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free 
Check that a never free pointer is on the heap.
 2019-04-10 08:26:37 -04:00
Scott Shawcroft
44e32506ed
Don't make Pins for those not connected on Itsy M0 2019-04-10 00:06:59 -07:00
Dan Halbert
c0c809ad4b Fix version skew for bast_pro_mini build 2019-04-09 22:52:53 -04:00
Scott Shawcroft
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks 
Don't let a background task call run_background_tasks()
 2019-04-09 18:39:28 -07:00
Dan Halbert
d8763debf5
shrink sparkfun_lumidrive build 2019-04-09 21:23:28 -04:00
Dan Halbert
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master 
Added Bast Pro Mini M0
 2019-04-09 20:53:05 -04:00
Dan Halbert
d633928a16 Don't let a background task call run_background_tasks() 2019-04-09 20:23:01 -04:00
Scott Shawcroft
129e725599
Merge branch 'master' into master 2019-04-09 14:40:36 -07:00
Scott Shawcroft
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi. 
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
 2019-04-09 12:36:14 -07:00
Scott Shawcroft
ef23ffe584
Turn off audiobusio on Hallowing to free rom 
It is about 5kb and the pins aren't broken out for it anyway.
 2019-04-09 12:01:00 -07:00
Scott Shawcroft
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display 2019-04-08 17:15:08 -07:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Radomir Dopieralski
8323721232 Stop hard-coding SPI frequency in FourWire 
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
 2019-04-06 15:15:29 +02:00
Scott Shawcroft
7686f93ef4
Fix crash when getting board.SPI outside the VM 
If one of the default pins was already in use it would crash.

The internal API has been refined to allow us to get the value
without causing an init of the singleton.

Fixes #1753
 2019-04-05 19:06:37 -07:00
Melissa LeBlanc-Williams
36b10104d6 Adjusted inline limit to fix Hallowing PL build 2019-04-05 12:17:16 -07:00
Melissa LeBlanc-Williams
7872a33f8b Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331 2019-04-05 11:10:02 -07:00
Dan Halbert
50d72ed993 shrink sparkfun_lumidrive to make room for large translations 2019-04-05 11:23:47 -04:00
Melissa LeBlanc-Williams
af3d809980 Updated boards files with displays 2019-04-04 23:18:15 -07:00
Dan Halbert
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor 
ROTARYIO_MODULE typo; EIC interrupt handler refactor
 2019-04-04 23:53:46 -04:00
Dan Halbert
682e83a63c Turn off rotaryio on pewpew10 so de_DE will fit 2019-04-04 20:28:32 -04:00
Dan Halbert
29df5930dd #if EIC handlers; turn off rotaryio in pirkey for space reasons 2019-04-04 16:48:38 -04:00
Dan Halbert
2528b67e77 update samd-peripherals 2019-04-04 16:36:14 -04:00
Dan Halbert
cdd77b5972 remove CPy-specific EIC handlers from samd-peripherals 2019-04-04 16:04:11 -04:00
Scott Shawcroft
ceb6f2e4fc
Rework flash flush so it preserves the cache 
This should make filesystem writes quicker and cause less heap
churn.
 2019-04-03 18:28:27 -07:00
Sabas
19c6b8aa0c
Merge branch 'master' into master 2019-04-02 23:15:56 -06:00
Dan Halbert
709de9ce9f
Merge pull request #1732 from ladyada/master 
add airlift lite - samd51j19 + 2MB QSPI
 2019-04-02 17:11:59 -04:00
Dan Halbert
10e35f30f0 shrink inline-limit to allow large Hallowing translation to fit 2019-04-01 12:18:25 -04:00
ladyada
8159272a8b remove old comment 2019-03-31 23:17:19 -04:00
ladyada
89cf60eac3 add airlift lite - samd51j19 + 2MB QSPI 2019-03-31 19:20:15 -04:00
sabas1080
bb7bb80b4a update bast pro mini m0 2019-03-30 15:28:23 -06:00
Melissa LeBlanc-Williams
8087cb41e5 Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix 2019-03-27 20:18:37 -07:00
Dan Halbert
f118aef283 copy/paste error 2019-03-27 18:19:39 -04:00
Dan Halbert
88068876ed turn off frequencyio for all SAMD21 builds 2019-03-27 17:54:36 -04:00
Dan Halbert
df79e9a732
Merge pull request #1687 from jrcutler/master 
Enable nvm storage for all samd21x18 boards
 2019-03-27 11:10:22 -04:00
Melissa LeBlanc-Williams
f4cede4747 Removed parameter so CS is always toggled 2019-03-26 18:46:13 -07:00
Melissa LeBlanc-Williams
b2ad16f5c8 Removed parameter so CS is always toggled 2019-03-26 18:34:07 -07:00
Melissa LeBlanc-Williams
5f0e71ccb4 Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix 2019-03-26 18:23:02 -07:00
Melissa LeBlanc-Williams
0df40534f3 Merge branch 'master' of https://github.com/adafruit/circuitpython 2019-03-26 18:22:30 -07:00
Scott Shawcroft
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush 
flush flash filesystem once a second
 2019-03-26 13:47:43 -07:00
ITACA Innovation S.R.L
74c5705a9a
Update mpconfigboard.mk 2019-03-25 17:19:40 +01:00
ITACA Innovation S.R.L
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c 2019-03-25 15:59:22 +01:00
ITACA Innovation S.R.L
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk 2019-03-25 15:59:00 +01:00
ITACA Innovation S.R.L
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h 2019-03-25 15:58:37 +01:00
ITACA Innovation S.R.L
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c 2019-03-25 15:57:35 +01:00
ITACA Innovation S.R.L
4886451000
Add files via upload 
This is a pull request to add support for uChip into the Circuitpython environment.

We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!


What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
 2019-03-25 13:06:31 +01:00
Melissa LeBlanc-Williams
c3329e224d Added Single Byte Boundaries option for certain displays 2019-03-24 23:59:28 -07:00
Justin R. Cutler
41f4f269f1 Disable frequencyio support for samd21-based catwan_usbstick target. 2019-03-24 14:22:23 -04:00
Justin R. Cutler
d6c7bda6d1 Enable 256b of nvm storage for all samd21x18-bootloader.ld boards. 2019-03-24 12:02:07 -04:00
Melissa LeBlanc-Williams
0c33f7fdb4 Enable CS toggle for displayio by default 2019-03-23 20:23:23 -07:00
Melissa LeBlanc-Williams
d2a0ec28a0 Fixed display init on boards with displays 2019-03-23 19:32:15 -07:00
Dan Halbert
eca23a7279 remove i2cslave from feather m0 crickit 2019-03-20 15:38:52 -04:00
Dan Halbert
fbf166af1a enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit 2019-03-20 14:36:24 -04:00
Dan Halbert
2459eabd66 flush flash filesystem once a second 2019-03-20 12:21:36 -04:00
Radomir Dopieralski
a50ee4f650 Add frozen stage module to ugame10 board 
And also ignore some more pins.

This is needed for the builds on the circuitpython.org to be functional.
 2019-03-17 14:03:50 +01:00
Scott Shawcroft
ff7e729032
Fix custom pin in use logic for SWD 
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.

Fixes #1633
 2019-03-14 11:11:35 -07:00
Scott Shawcroft
e05ab64398
Squeeze down the feather crickit build 2019-03-13 17:20:18 -07:00
Dan Halbert
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes 
Final displayio changes before 4.0.0
 2019-03-13 18:24:04 -04:00
Dan Halbert
97140e6a62 wrong arg type for PWMOut variable_frequency 2019-03-12 21:28:30 -04:00
Scott Shawcroft
96a924f5f0
Turn off networking on M0s. 
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
 2019-03-12 17:18:30 -07:00
Scott Shawcroft
2e500a8a29
Copy inline setting on feather m0 express that the metro has. 2019-03-12 14:06:01 -07:00
Scott Shawcroft
b1c572e82e
Fixup the pybadge definition so the screen works. 2019-03-12 11:18:29 -07:00
Scott Shawcroft
37e10d4a81
Be more careful when initing the board outside the VM. 2019-03-12 11:18:29 -07:00
John Reese
ef4a74e201
Add basic Pybadge board definition 
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:

```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
 with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
 2019-03-12 11:12:35 -07:00
Scott Shawcroft
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER 
add SPEAKER pin alias for PyPortal
 2019-03-11 19:16:01 -07:00
caternuson
46fc8a8a86 change order so SPEAKER is first 2019-03-11 17:45:27 -07:00
caternuson
53b7055283 add SPEAKER pin alias for PyPortal 2019-03-11 15:12:29 -07:00
Radomir Dopieralski
caf51cf4eb Add default devices and tweak brightness in boards/pewpew10 2019-03-11 19:09:21 +01:00
Dan Halbert
26ed411936 Shrink build so de_DE fits 2019-03-07 07:47:18 -05:00
sommersoft
b7b74d1f78 update translations 2019-03-02 18:17:58 -06:00
sommersoft
b2520f3147 using the correct name for things is important... 2019-03-02 16:17:23 -06:00
sommersoft
c9eb02d9d2 shore-up inclusion 2019-03-02 10:05:32 -06:00
sommersoft
2cd6a79016 better handle frequencyio inclusion 2019-03-01 22:46:57 -06:00
sommersoft
438eadd63a re-add frequencyin to 'timer_handler' after upstream merge 2019-03-01 21:47:23 -06:00
sommersoft
a44bfc2730 Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in 2019-03-01 21:24:30 -06:00
Dan Halbert
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x 
Add support for PewPew 10.x boards
 2019-03-01 14:07:32 -05:00
Radomir Dopieralski
263134dcd3 Add more guards for CIRCUITPYTHON_PEW 2019-03-01 18:50:00 +01:00
Dan Halbert
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb 
Use TCC LUPD lock when updating CCB
 2019-03-01 12:03:38 -05:00
Radomir Dopieralski
2bfafd1fc9 Enable math for pewpew10 2019-03-01 16:55:54 +01:00
Radomir Dopieralski
5d85d54026 Move the frozen pew.py into a submodule 2019-03-01 16:24:22 +01:00
Radomir Dopieralski
89b2788d11 Apply review fixes: 
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
 2019-03-01 16:05:15 +01:00
Radomir Dopieralski
3826ca4194 Rename internal pins to add underscore in front 2019-03-01 15:10:43 +01:00
Radomir Dopieralski
f5f4932220 Clean unused include from tick.c 2019-03-01 15:09:00 +01:00
Radomir Dopieralski
18870255ea Remove the pewpew70 board definition, leave only pewpew10 2019-03-01 15:06:24 +01:00
Dan Halbert
fb027f2024 Update PyPortal pins to rev C 2019-03-01 09:06:03 -05:00
Radomir Dopieralski
45fea86554 Rebase on top of CircuitPython 4.x 2019-03-01 14:59:21 +01:00
Dan Halbert
3c24e893e9 Fix SYNCBUSY loop typo. 2019-02-28 23:38:26 -05:00
Dan Halbert
808304e827 Use TCC LUPD lock when updating CCB 2019-02-28 19:53:35 -05:00
Radomir Dopieralski
59f63eaef6 Handle new buttons 2019-02-28 23:34:03 +01:00
Radomir Dopieralski
0a5c1c9402 Some cleanup 2019-02-28 23:34:03 +01:00
Radomir Dopieralski
55b511a5d8 Use a dedicated timer 2019-02-28 23:33:37 +01:00
Radomir Dopieralski
88e40193ae Add a _pew module 2019-02-28 23:32:58 +01:00
Radomir Dopieralski
7ac11ed8e1 Enlarge the usb disk 2019-02-28 23:25:18 +01:00
Radomir Dopieralski
5a1e69f5b8 Correct a typo in the pin name 2019-02-28 23:23:26 +01:00
Radomir Dopieralski
a41ea27596 Add pewpew70 board 2019-02-28 23:23:26 +01:00
sommersoft
4d47ce5c60 fixes set_timer_handler call 2019-02-27 19:28:59 -06:00
sommersoft
9d20380bd4 Merge branch 'master' into new_freq_in 2019-02-26 04:29:16 +00:00
sommersoft
4a9f05a44f final re-glue; compiles now. 2019-02-25 21:22:52 -06:00
sommersoft
a8204f1bf9 touchup adding frequencyin interrupt handling 2019-02-24 18:07:55 -06:00
sommersoft
f602fa3d9f fix init deps 2019-02-24 18:07:26 -06:00
Bryan Siepert
3afcd3f5bc another/different size tweak for the DE hallowing build 2019-02-23 20:18:22 -08:00
Bryan Siepert
2cb31ea546 Merge branch 'master' into bmp_bitdepths 2019-02-23 20:16:57 -08:00
Bryan Siepert
3843e96edc Tweaking German hallowing build for size 2019-02-23 19:47:58 -08:00
ladyada
85421f9766 final pin names, tested with final release 2019-02-23 15:40:28 -05:00
sommersoft
2437ab9605 update frequencyin interrupt handler 2019-02-22 17:19:09 -06:00
sommersoft
a1060747f8 Merge branch 'new_master' into new_freq_in 2019-02-22 23:12:11 +00:00
Scott Shawcroft
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler 
Move shared_timer_handler
 2019-02-22 11:04:27 -08:00
sommersoft
a3f387274f fix build issues 2019-02-21 20:46:42 -06:00
sommersoft
7a7f6638d2 update peripherals submodule 2019-02-21 18:44:51 -06:00
Kattni
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer 
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
 2019-02-21 12:28:41 -05:00
Dan Halbert
99da3b9646 Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list 2019-02-21 00:19:31 -05:00
sommersoft
55e7c5a41b handle 'set_timer_handler' on this side, vs samd-periphs. 2019-02-19 20:18:21 -06:00
Dan Halbert
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap 
Fix displaying images off of SD cards.
 2019-02-19 19:28:53 -05:00
Scott Shawcroft
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout 
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
 2019-02-19 16:14:33 -08:00
Scott Shawcroft
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation. 2019-02-19 14:51:39 -08:00
Dan Halbert
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7 
PYPORTAL:make it easier for people to hookup in spi mode
 2019-02-19 14:12:30 -05:00
Dan Halbert
9c24c804fb Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD. 2019-02-18 22:44:31 -05:00
TG-Techie
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic 2019-02-18 15:00:14 -05:00
Dan Halbert
339a22752b Remove rtc from pirkey_m0 to make TRANSLATION=fr fit 2019-02-18 09:02:26 -05:00
Dan Halbert
97aeb1953b correct weak module links; samd module only in m4 ports; update libraries 2019-02-17 23:48:08 -05:00
sommersoft
dafc370d22 moves 'shared_timer_handler' back to atmel-samd from samd-peripherals 2019-02-16 19:54:16 -06:00
sommersoft
ea9200a042 starting again; initial addition of 'frequencyio.FrequencyIn' 2019-02-16 19:26:24 -06:00
Dan Halbert
7b3f7605b8 address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE 2019-02-15 20:32:32 -05:00
Dan Halbert
a345ef28f2 finish Makefile refactoring; nrf builds work 2019-02-15 18:55:10 -05:00
Dan Halbert
cf545cd477 WIP: fix issues with remaining atmel-samd builds 2019-02-15 09:52:45 -05:00
Dan Halbert
5154e0581e WIP: atmel-samd trinket build works 2019-02-15 00:28:20 -05:00
Dan Halbert
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode 
A safe mode fix and displayio fixes
 2019-02-13 21:15:14 -05:00
Scott Shawcroft
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6 
PYPORTAL: pindefs incorrect
 2019-02-13 17:21:22 -08:00
Scott Shawcroft
473bdf48f6
A safe mode fix and displayio fixes 
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
 2019-02-13 15:31:06 -08:00
Dan Halbert
da5008f4d8 Fix atmel UART after ASF4 pruning. 2019-02-13 11:42:09 -05:00
TG-Techie
e901317fd7
PYPORTAL: pindefs incorrect 
@jerryneedell  suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works! 

used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
                                      board.TOUCH_YD, board.TOUCH_YU,
                                      calibration=((5200, 59000), (5800, 57000)),
                                      size=(320, 240))

while True:
    p = ts.touch_point
    if p:
        time.sleep(.5)
        print(p)
```
 2019-02-12 22:18:36 -05:00
Scott Shawcroft
70f40a03cb
Rotate pyportal screen to be correct 2019-02-12 13:53:27 -08:00
Scott Shawcroft
b4306314aa
Move terminal font to terminalio from board. 2019-02-12 10:10:02 -08:00
Scott Shawcroft
c17f147be9
A variety of displayio improvements 
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
  a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
 2019-02-11 20:55:05 -08:00
Scott Shawcroft
1a6ad20943
Get space back by using less ASF4 and combining register writes 2019-02-11 17:36:34 -08:00
Max Holliday
2e48739a4e standardizing on "BATTERY" pin; and load-leveling Travis 2019-02-06 10:50:57 -08:00
Max Holliday
4c1b85cdcd elaborating on include path for board_busses 2019-02-05 20:21:54 -08:00
Max Holliday
30fcb14017 correcting VID/PID and adding sam32 to travis 2019-02-05 19:20:43 -08:00
Max Holliday
a2936c4c20 adding SAM32 board 
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
 2019-02-05 17:22:34 -08:00
Scott Shawcroft
844c20106b
Turn off micropython.mem_info on SAMD to get ~1k back 2019-02-04 18:00:18 -08:00
Scott Shawcroft
90e5964703
Set auto brightness on by default for boards with displays built in. 2019-02-03 13:42:03 -08:00
Scott Shawcroft
03068a9388
Fix built-in inits and terminal allocate 2019-02-01 01:00:10 -08:00
Scott Shawcroft
ec03887040
Fix hallowing and nrf builds 2019-01-31 11:42:15 -08:00
Scott Shawcroft
601a910f4e
More improvements to Terminal: 
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
 2019-01-31 11:42:14 -08:00
Scott Shawcroft
69bc5e189b
Rudamentary backlight support 2019-01-31 11:42:14 -08:00
Scott Shawcroft
1a1dbef992
Hook up the terminal based on the first display. 2019-01-31 11:42:14 -08:00
Scott Shawcroft
fb0970ec6e
Add terminalio 2019-01-31 11:42:13 -08:00
Scott Shawcroft
73cf490635
Add TileGrid 2019-01-31 11:42:13 -08:00
Scott Shawcroft
39240516f3
Correct pin capitalization 2019-01-31 09:11:30 -08:00
Scott Shawcroft
3225878f63
for redboard turbo too 2019-01-30 22:55:36 -08:00
Scott Shawcroft
fe2a092f1c
Fix board_bus location 2019-01-30 22:54:26 -08:00
Elias Santistevan
b124071e10 Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml 2019-01-30 16:13:08 -07:00
Elias Santistevan
178cfc1623 Adds make config files for SparkFun LumiDrive and Redboard Turbo 2019-01-30 13:50:29 -07:00
Scott Shawcroft
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3 
fixed compiling error for datalore ip m4
 2019-01-27 14:07:16 -08:00
Scott Shawcroft
de2861969b
Merge pull request #1494 from TG-Techie/patch-2 
add displayio to TG-Techie's first board
 2019-01-27 14:06:47 -08:00
ShawnHymel
dd5165c92c Added support for SparkFun SAMD21 Dev 2019-01-25 12:27:31 -06:00
TG-Techie
468faf4e2b
fixed compiling error 2019-01-25 12:42:43 -05:00
ShawnHymel
65dc8d0c74 Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout 2019-01-25 11:08:19 -06:00
TG-Techie
e9538dbc7f
add displayio to TG-Techie's first board 2019-01-25 12:06:05 -05:00
ShawnHymel
d79615f96b Revert "Updated samd readme with SparkFun SAMD21 Dev pinout" 
This reverts commit d10fa4a8cb.
 2019-01-25 11:02:22 -06:00
ShawnHymel
d10fa4a8cb Updated samd readme with SparkFun SAMD21 Dev pinout 2019-01-25 10:14:53 -06:00
Scott Shawcroft
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space. 2019-01-22 18:49:37 -08:00
Scott Shawcroft
0cdbc004e6
Enable displayio on all Express boards. 2019-01-22 17:59:31 -08:00
Scott Shawcroft
f43379c771
No pixelbuf on Hallowing 2019-01-22 14:38:34 -08:00
Scott Shawcroft
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD 2019-01-22 14:02:07 -08:00
Roy Hooper
50af08a6f3 Merge branch 'master' into pixelbuf 2019-01-19 16:33:59 -05:00
Scott Shawcroft
edc8383e22
Improvements thanks to danh's review 2019-01-18 16:37:06 -08:00
Scott Shawcroft
ae52c964c2
Cleanup display rework for PR. 
Fixes #1465. Fixes #1337. Fixes #1168
 2019-01-18 13:47:40 -08:00
Scott Shawcroft
41dad1ea1e
Fix pin defs 2019-01-18 11:43:35 -08:00
Scott Shawcroft
96e2c717fc
Fix build 2019-01-17 22:10:11 -08:00
Scott Shawcroft
6404aaf411
Fix up nrf and using board.SPI in FourWire 2019-01-17 18:19:07 -08:00
Scott Shawcroft
760bd8d8a4
share fourwire and make nrf compile 2019-01-17 15:15:59 -08:00
Scott Shawcroft
2d136d58bf
Fix other builds and hallowing 2019-01-17 14:45:29 -08:00
Scott Shawcroft
5277138c99
pyportal compiles and tweak blinka colors 2019-01-17 10:57:05 -08:00
Scott Shawcroft
84292ad890
External fourwire works and blinka splash after 2019-01-17 00:20:16 -08:00
Scott Shawcroft
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel. 2019-01-16 12:05:20 -08:00
ladyada
19b6c5c802 more pins! 2019-01-16 01:49:12 -05:00
Scott Shawcroft
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1 
Update DLIPM4 mpconfigboard.mk
 2019-01-15 18:40:46 -08:00
Scott Shawcroft
a14762a16c
Add support for rendering a shape. 
Fixes #1171
 2019-01-14 17:29:15 -08:00
TG-Techie
f667d4d887
Update mpconfigboard.mk 
oops, forgot to change those when i copied the folder
 2019-01-14 14:43:34 -05:00
Roy Hooper
ffe734edf7 Fresh combined checkin of _pixelbuf library. 2019-01-13 23:51:13 -05:00
TG-Techie
ef6c9e7df6 removed commented code 2019-01-12 23:19:40 -05:00
TG-Techie
309a02efa1 added datalore ip m4 to boards 2019-01-12 23:06:12 -05:00
Dan Halbert
5f9980fb6b support winbond 8MB chips on all boards that might use them 2019-01-12 13:24:35 -05:00
Dan Halbert
6eecf96710 Use correct SERCOM for SDA/SCL on Grand Central 2019-01-11 19:06:46 -05:00
Scott Shawcroft
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal 
Enable the display on pyportal
 2019-01-11 10:33:16 -08:00
Scott Shawcroft
b2cec6275c
Fix screen rotation and reset pin 2019-01-11 00:10:41 -08:00
Dan Halbert
50ee5ef24c merge translations; add bleio comments; fix minor sphinx issues in midi 2019-01-10 21:12:17 -05:00
Scott Shawcroft
19db886645
Support the display on the pyportal. 
Also fix #1390, reload during sleep broken.
 2019-01-10 17:29:34 -08:00
Dan Halbert
516d7da641
Merge pull request #1449 from tannewt/midi 
Add USB MIDI support for SAMD and nRF.
 2019-01-10 19:49:33 -05:00
Shawn Hymel
bbf77a7efb
Merge branch 'master' into master 2019-01-10 12:50:05 -06:00
ShawnHymel
5c15a19c32 Added SparkFun SAMD21 Mini port 2019-01-09 16:12:43 -06:00
Scott Shawcroft
b5e40f52c2
Add USB MIDI support for SAMD and nRF. 
The API should be identical to using a UART for MIDI.

Fixes #672
 2019-01-09 14:02:11 -08:00
Dan Halbert
0599fbf7d8 Merge remote-tracking branch 'adafruit/master' into bleio-rev 2019-01-08 16:40:12 -05:00
ShawnHymel
a00420bafd Added pinout for SparkFun SAMD21 Mini Breakout on README. 2019-01-07 17:26:38 -06:00
Scott Shawcroft
d3aeca104e
Initial pass at pyportal board define. 2019-01-07 14:56:54 -08:00
ShawnHymel
180c7b4b79 Trying iframe in rst again^3. 2019-01-07 16:35:47 -06:00
ShawnHymel
4d3ae04e2b Trying iframe in rst again again. 2019-01-07 16:31:52 -06:00
ShawnHymel
04b9a789ff Trying iframe in rst again. 2019-01-07 16:28:14 -06:00
ShawnHymel
2df3e7b0fc Updated README with embedded spreadsheet 2019-01-07 16:25:34 -06:00
Dan Halbert
4167bf5b24 wip: advertising works, but not connection 2018-12-27 00:04:04 -05:00
Limor "Ladyada" Fried
a9f0b31a15
Update README.rst 
https://github.com/adafruit/circuitpython/issues/1410
 2018-12-19 13:25:18 -05:00
Scott Shawcroft
69bb4ae670
Merge pull request #1397 from ShawnHymel/master 
Added board support for Arduino MKR Zero
 2018-12-11 13:09:27 -08:00
Scott Shawcroft
29f9794dcf
Curly brace change to make it more consistent 
And to queue Travis
 2018-12-11 11:57:52 -08:00
ShawnHymel
f8ded46ad6 Merged field in pin table in README. 2018-12-08 17:42:42 -06:00
ShawnHymel
4c81d9a9ac Added SD_CD pin definition 2018-12-08 17:40:46 -06:00
Scott Shawcroft
801d9a5abc
Fix running the USB task on nRF. 
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
 2018-12-07 16:11:21 -08:00
Scott Shawcroft
6ef8639971
Rework safe mode and have heap overwrite trigger it. 
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.

The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.

A couple NeoPixel fixes are included for the nRF52 as well.

Fixes #1034. Fixes #990. Fixes #615.
 2018-12-06 14:24:20 -08:00
Scott Shawcroft
7ad2e6ace3
Add stack validity check and raise an error when it happens. 
The backtrace cannot be given because it relies on the validity
of the qstr data structures on the heap which may have been
corrupted.

In fact, it still can crash hard when the bytecode itself is
overwritten. To fix, we'd need a way to skip gathering the
backtrace completely.

This also increases the default stack size on M4s so it can
accomodate the stack needed by ASF4s nvm API.
 2018-12-04 23:26:04 -08:00
Scott Shawcroft
f59c3bd726
Add flag comment 2018-12-04 18:22:23 -08:00
Scott Shawcroft
3f5d917b39
Update submodules to merge commits 2018-12-04 18:20:51 -08:00
Scott Shawcroft
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build 2018-12-04 18:20:48 -08:00
Dan Halbert
63cd9209f1 allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins 2018-12-04 15:05:39 -05:00
Dan Halbert
7f6da78be3
Merge pull request #1344 from bwshockley/master 
Add Mini SAM M4 board.
 2018-12-03 17:37:23 -05:00
Dan Halbert
80db2cec99 UART changes: timeout in secs, write bytes, etc. 2018-12-03 12:04:32 -05:00
ShawnHymel
3d597aae92 Added MKR Zero board definition. 2018-12-02 18:07:19 -06:00
Scott Shawcroft
9aebe2f1ef
Merge branch 'master' into master 2018-11-30 20:49:55 -08:00
Scott Shawcroft
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b 2018-11-30 15:09:15 -08:00
Scott Shawcroft
48928d4b25
Auto build and a couple pin fixes 2018-11-30 15:08:06 -08:00
Scott Shawcroft
77760090e2
Fix up spi flash define 2018-11-30 14:55:06 -08:00
Scott Shawcroft
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam 2018-11-30 14:40:01 -08:00
Scott Shawcroft
c47c495aca
Merge pull request #1329 from notro/oserror_errno 
Support OSError subclasses and attributes
 2018-11-27 22:35:54 -08:00
Scott Shawcroft
913b513929
Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick 
Added board Electronic Cats CatWAN USB Stick
 2018-11-27 11:58:26 -08:00
Scott Shawcroft
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson 
json: enable on nrf boards and "large flash" M4 samd boards
 2018-11-27 11:29:29 -08:00
sabas1080
1da2425612 Add Electronic Cats CatWAN USB Stick 2018-11-26 14:39:58 -06:00
Scott Shawcroft
324301e3bc
Update tinyusb to include control fixes. 2018-11-23 13:28:10 -08:00
Jeff Epler
78972cc879 ports/atmel-samd: enable json module on M4 boards with lots of flash 2018-11-22 10:35:44 -06:00
Benjamin Shockley
69eb2efced
Update devices.h 2018-11-20 13:21:43 -06:00
Scott Shawcroft
7d1a62e4ba
Update for Grand Central Rev B 2018-11-20 10:54:13 -08:00
Benjamin Shockley
c344d48840
Update devices.h 2018-11-20 12:44:12 -06:00
Benjamin Shockley
acb9bd7618 Cleanup for Mini SAM M4 Only 
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
 2018-11-16 09:46:08 -06:00
Dan Halbert
11de8fdca7 merge 3.x swap of /lib and .frozen; update frozen libs 2018-11-15 15:00:23 -05:00
Scott Shawcroft
87ddd64481
Factor out fake partition 2018-11-14 17:59:11 -08:00
Noralf Trønnes
704d0c606b samd51: Support more uerrno errno values 
Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.
 2018-11-13 22:07:05 +01:00
Dan Halbert
f190bb2c26
Merge pull request #1332 from tannewt/clear_trellis_neopixels 
Clear Trellis NeoPixels on board reset.
 2018-11-13 15:03:25 -05:00
Scott Shawcroft
4ae4cc11e0
Clear Trellis NeoPixels on board reset. 
This makes it easier to change code in cases where the pixels may
cause a brownout.
 2018-11-13 11:27:18 -08:00
Scott Shawcroft
a3a690dc01
Add pragma to ensure neopixel_write is always -Os 2018-11-13 10:56:00 -08:00
Scott Shawcroft
ed9db80760
Switch SAMD51 back to -Os 
It messes up neopixel timing otherwise.

Fixes #1326
 2018-11-13 10:43:18 -08:00
Scott Shawcroft
355abc835e
Fix output overflow and make help translatable 2018-11-09 16:41:08 -08:00
Scott Shawcroft
43f7ca7985
Incorporate feedback: 
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
 2018-11-09 11:33:56 -08:00
Scott Shawcroft
688f0e388b
Update MKR1300 board definition too 2018-11-09 00:49:02 -08:00
Scott Shawcroft
be6b49c712
Add back internal flash header and slim it down. 2018-11-09 00:27:18 -08:00
Scott Shawcroft
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash. 
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
 2018-11-08 17:25:30 -08:00
Scott Shawcroft
6aca9762c9
Merge pull request #1313 from siddacious/master 
adding support for the CP32-M4
 2018-11-04 11:26:14 -08:00
Dan Halbert
a15ed0b912 Fix Trellis M4 DotStar pin assignments. 2018-11-04 00:07:42 -04:00
ATMakersBill
bd4188a092 adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh 2018-11-03 14:42:27 -04:00
ATMakersBill
4f2f571536 Adding the serial_bytes_available() method to the 3.x branch 2018-11-03 14:01:30 -04:00
Dan Halbert
4dfba2f8ac put .frozen before /lib in sys.path; update frozen libraries 2018-11-01 19:57:10 -04:00