98469322b7
Merge pull request #3276 from xiongyihui/main
...
support to change ble mac address
2020-08-14 11:14:36 -04:00
52990a332d
fix
2020-08-14 17:48:15 +08:00
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size
...
Squeeze firmwares to fit the new ja translation
2020-08-13 12:19:28 -04:00
329f4fb2e6
Update mpconfigboard.mk
...
The stm boards default to `-O2`. Changing to `-Os` brings it back to ~43kB (!) free even for ja.
2020-08-13 10:09:46 -04:00
42b860e91a
stm: meowbit_v121: remove _pixelbuf to fit ja translation
2020-08-13 07:49:45 -05:00
e7da652711
able to change ble mac address
2020-08-13 16:54:29 +08:00
44c9c43cd1
ble_uart_echo_test works
2020-08-13 00:03:39 -04:00
239c8ff87f
metro_m0_express: put back audiobusio
...
this now fits locally (though it's very close to capacity);
let's see what the CI says.
```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
2020-08-12 19:11:33 -05:00
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2
...
Sharp Memory Display displayio support (v2)
2020-08-12 16:53:09 -07:00
aa0b4f7045
cpx_display: Put back AUDIOBUSIO, take away ROTARYIO
...
AUDIOBUSIO is needed for the on-board mic using PDMIn
2020-08-12 16:17:48 -05:00
ea8e9b8cef
metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO
...
Dan notes that this is more frequently the solution we've chosen
2020-08-12 16:17:13 -05:00
299894025a
stringcar_m0_express: make ja translation fit
2020-08-12 13:47:10 -05:00
f08ee0db20
itsybitsy_m0_express: make ja translation fit again
2020-08-12 13:44:00 -05:00
7bd42244c9
snekboard: make ja translation fit
2020-08-12 13:34:36 -05:00
45f6bc1f3e
serpente: make ja translation fit
2020-08-12 13:32:08 -05:00
36bfbaae69
feather_radiofruit_zigbee: make ja translation fit
2020-08-12 13:28:30 -05:00
58a1361d3e
Merge remote-tracking branch 'origin/main' into ja-firmware-size
2020-08-12 13:26:12 -05:00
06f6cd067d
nrf: Improve commenting about disabled warnings
2020-08-12 12:59:48 -05:00
813dcd1b73
trinket_m0_haxpress: make ja translation fit
2020-08-12 12:44:17 -05:00
88f222f1a1
metro_m0_express: make ja translation fit
2020-08-12 12:38:17 -05:00
ba91023fff
itsybitsy_m0_express: make ja translation fit
2020-08-12 12:35:29 -05:00
6b9f7c9047
hallowing_m0_express: make ja translation fit
2020-08-12 12:29:30 -05:00
58afda342d
feather_m0_supersized: make ja translation fit
2020-08-12 11:53:34 -05:00
27c2eb1869
feather_m0_express: make ja translation fit
2020-08-12 11:51:56 -05:00
8865e4ca97
circuitplayground_express_displayio: make ja translation fit
2020-08-12 11:46:52 -05:00
f3748fe20d
circuitbrains_basic_m0: Use optimization flags to let ja translation fit
2020-08-12 11:46:31 -05:00
f9d1d9d114
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 11:15:34 -05:00
454e616d13
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 10:46:56 -05:00
3197c579e0
Merge pull request #3262 from tannewt/fix_fs_corruption
...
Fix writing sector 0 as the first write.
2020-08-12 08:14:55 -07:00
32fc8b0676
nrf: reset_pin_number: reset pin clears never-reset, mirroring samd
2020-08-12 07:32:18 -05:00
760a171903
nrf: Make port build with -Werror=undef
...
.. build-tested on particle_xenon
2020-08-12 07:32:18 -05:00
49407b6c06
trailing spaces fix
2020-08-12 13:42:45 +02:00
e34fac6645
Whitespace and Newline fix
2020-08-11 23:59:32 +02:00
06f3b4048a
fix #3228 for nrf; still needs to be fixed for HCI; tested
2020-08-11 16:21:16 -04:00
228d9b5a12
Fixing indentation
2020-08-11 22:18:15 +02:00
22ae1dbac8
Removing unnecessary pin ignored
2020-08-11 22:17:17 +02:00
00676ff5a9
PicoPlanet
2020-08-11 21:49:52 +02:00
8488b31aa0
Init directly
2020-08-11 11:19:40 -07:00
bbac68e77c
Merge pull request #3232 from hierophect/esp32-neopixel
...
ESP32-S2: Add Neopixel support
2020-08-11 11:04:39 -07:00
87c78be8f4
Fix writing sector 0 as the first write.
...
This was the FS issue I saw when debugging wifi and only happens
when the first write is to sector 0. It causes issues because it
blanks all of sector 0 after the first block.
Fixes #3133
2020-08-10 17:14:49 -07:00
807f049dc3
Merge pull request #3244 from xiongyihui/main
...
add an option to turn off QSPI when sleep
2020-08-10 16:06:57 -05:00
1cf3762392
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-10 12:54:12 -05:00
d47bd5529c
Fix neopixel macro issue, set default neopixel color
2020-08-10 13:16:20 -04:00
0f4b969d62
discovery of Nordic UART service working
2020-08-08 00:29:37 -04:00
1d980d527e
Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x
2020-08-07 12:48:41 -04:00
af1291ec28
dynamically enable or disable QSPI by default
2020-08-07 16:23:42 +08:00
f7961b96a9
update comment
2020-08-06 10:05:18 -04:00
c42ffb8f3d
remove usb_hid
2020-08-06 05:44:26 -04:00
d8257380d7
add qspi_disable()
2020-08-06 09:56:05 +08:00
78d049d0f1
Fix pwm reset spew, protect against null reference in led status
2020-08-05 14:05:53 -04:00
432f43a472
freeze rfm9x and BusDevice, remove many built-in modules
2020-08-05 11:37:57 -04:00
c7b6e66426
Fixes for pulsein tick handling
2020-08-05 10:03:20 -05:00
7854625c4e
avoid using the RGB LEDs to save energy
2020-08-05 16:08:13 +08:00
dbe47a6a2a
adjust
2020-08-05 16:07:18 +08:00
93b373d617
"pop from empty %q"
...
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
14b3b51c58
Rework build flags, prevent idf errors
2020-08-04 18:40:24 -04:00
ac95106b88
service discovery works; need to work on char and descriptor discovery
2020-08-04 18:24:37 -04:00
c849b781c0
Combine 'index out of range' messages
2020-08-04 14:45:45 -05:00
89797fd3f9
various: Use mp_obj_get_type_qstr more widely
...
This removes runtime allocations of the cstring version of the qstring.
It is not a size improvement
2020-08-04 14:45:45 -05:00
dddd25a776
Combine similar strings to reduce size of translations
...
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used. The net savings on trinket_m0 is
just 32 bytes.
It also means that the translation will include the original English
text, and cannot be translated. These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
6dc0f4f1b6
add an option to turn off QSPI when sleep
2020-08-05 01:10:58 +08:00
0e2d231445
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-03 21:01:53 -05:00
a995a5c58f
wip: partial discovery responses; compiles; not tested
2020-08-03 21:02:57 -04:00
d7eedc5e38
Merge pull request #20 from adafruit/main
...
Update from main
2020-08-03 13:14:01 -05:00
9203a77804
Turn off interrupts while in handler
2020-08-03 11:31:12 -05:00
4900668778
Merge remote-tracking branch 'upstream/main' into esp32-neopixel
2020-08-03 12:26:37 -04:00
0e30fe1cc5
Update VID & PID codes
2020-08-02 19:54:11 -05:00
0a60aee3e4
wip: compiles
2020-08-02 11:36:38 -04:00
b074f8a161
update for build test
2020-08-02 00:42:36 -05:00
fea1cad02c
add support for Bast Wifi Electronic Cats
2020-08-01 17:51:45 -05:00
12b81618a3
Changes for getting supervisor ticks
2020-08-01 13:27:02 -05:00
1771858f4a
add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes
2020-08-01 13:20:46 -04:00
4b71831d8b
SUPEROPT_VM = 0 for de_DE
2020-08-01 12:36:20 -04:00
94b2561860
Fix include error
2020-08-01 09:22:18 -04:00
1c1df053d5
Add neopixel support
2020-07-31 15:34:12 -04:00
27c6ffb9a2
atmel-samd: gemma, trinket: Make space for de_DE translation
2020-07-30 11:29:47 -05:00
d69f081c04
Merge remote-tracking branch 'origin/main' into blm_badge
2020-07-30 07:24:48 -05:00
531c1e046c
Merge pull request #3226 from joeycastillo/main
...
Small updates to Open Book board
2020-07-30 07:21:50 -05:00
f175a49444
stm: sdioio: include header for common_hal_mcu_pin_claim
2020-07-30 07:18:12 -05:00
b57e6e9856
stm: sdioio: call common_hal_mcu_pin_claim
2020-07-30 07:18:12 -05:00
d73505a027
stm: fix if-guard of conditional code
2020-07-30 07:18:12 -05:00
60dd5a8d7d
stm: sdioio: remove unused code related to "SD Card detect pin"
...
.. this probably came from the examples that I studied at the beginning
of implementation.
The card detection feature is unused. As a "detect pin" is not
sent from the shared-bindings, there is no way to get the correct pin
anyway. Instead, if code needs to detect the insertion state it can
directly use the pin as GPIO in Python code.
2020-07-30 07:18:02 -05:00
ccd3013396
stm: stioio: correctly claim pins
2020-07-30 07:18:02 -05:00
3cf1258c87
stm: sdioio: Get rid of debug code and useless comments
2020-07-30 07:18:02 -05:00
6a99a7b551
stm: Use 'Invalid %q pin selection' more places
2020-07-30 07:18:02 -05:00
92d2f47503
feather_stm32f405_express: sdio_data_tuple should be static
2020-07-30 07:18:02 -05:00
4adbd23b75
stm: Add sdioio support for feather_stm32f405_express
...
Currently, only the bus specs of the stm32f405xx have been coded.
Other stm-family chips need (at a minimum) the specs added in their
periph.[ch] files.
2020-07-30 07:18:02 -05:00
d30f11163c
stm: enable SD module in HAL
2020-07-30 07:18:02 -05:00
af135a7560
atmel-samd: move samd-specific script
2020-07-30 07:18:02 -05:00
8acec2ca35
add descriptive pin names
2020-07-29 13:49:08 -04:00
ea9bc9b4b6
set screen orientation to portrait
2020-07-29 13:46:10 -04:00
b2ec77e554
Merge remote-tracking branch 'adafruit/main' into improve-highspeed-usb
2020-07-29 23:14:52 +07:00
b6724e843c
update CDC/MIDI bufsize to at least 512 for highspeed port
2020-07-29 16:22:27 +07:00
6063828279
replace USB_MSC_MAX_PACKET_SIZE with USB_HIGHSPEED in descriptor gen tool
2020-07-29 15:38:55 +07:00
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins
...
fluff_m0: add pin aliases
2020-07-28 15:15:15 -04:00
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals
...
Use samd peripherals fixed for gcc 10
2020-07-28 15:14:20 -04:00
b30d89131b
Merge pull request #3215 from ansonhe97/main
...
Added display QSTR to Wio Terminal
2020-07-28 11:53:17 -07:00
aa97ea2501
Merge remote-tracking branch 'adafruit/main' into blm_badge
2020-07-28 14:15:02 -04:00
92216d6417
Use samd peripherals fixed for gcc 10
2020-07-28 11:14:25 -07:00
e5e132a364
add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT
2020-07-28 11:49:54 -04:00
e15bcebb6e
Added display QSTR to Wio Terminal
2020-07-28 17:31:17 +08:00
d37326326d
init bastwifi
2020-07-28 00:56:37 -05:00
945736e9bb
add adjustments for crickit and displayio variants of CPX
2020-07-27 22:13:04 -04:00
2bdd62220e
adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice
2020-07-27 21:50:36 -04:00
debbf1028a
Merge pull request #3196 from IkigaiSense/ikigaisense_vita
...
add-ikigaisense_vita-nRF52840
2020-07-27 16:10:57 -07:00
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2
...
ndgGarage ndbit6 v2
2020-07-27 15:51:23 -07:00
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations
...
More type hints
2020-07-27 14:26:54 -07:00
d356581651
Fix several type hints
2020-07-27 18:05:13 +09:00
b2c4b0bcfa
fluff_m0: don't exclude portb pins explicitly
2020-07-26 17:26:32 +02:00
b1b253c012
fluff_m0: add pin aliases
...
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.
Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
2020-07-26 13:39:42 +02:00
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test
...
Changes to allow different compiler optimizations per board
2020-07-25 17:03:10 -04:00
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2
...
Add GamePad to Commander board
2020-07-25 16:57:58 -04:00
c4a5297ee2
Add GamePad to Commander
2020-07-25 17:53:27 +00:00
6696915801
fix-ndbit6-for-ndbit6_v2
2020-07-25 10:07:33 -06:00
c4817968ee
Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test
2020-07-24 23:28:41 -05:00
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
739981b34e
update for pewpew
2020-07-24 17:27:25 -05:00
a14101cd13
Use current mpconfigboard.mk with optimization change
2020-07-24 14:09:09 -05:00
356b1a8d6d
Finish common-hal pin API
2020-07-24 12:29:18 -04:00
c735dceed5
Merge pull request #3099 from hierophect/stm32-timer-allocator
...
STM32: Add timer allocator, PulseIO adjustments
2020-07-24 11:16:39 -04:00
b9cdf195e2
board mk file changes
2020-07-24 10:00:42 -05:00
204cdada7c
remove unnecessary mk files parameters
2020-07-24 09:53:40 -05:00
54a342a7f5
Add and correct some type hints
2020-07-24 18:20:03 +09:00
ce37a442e8
format fix
2020-07-23 19:35:04 -05:00
c937fa1760
fix formatting
2020-07-23 19:29:57 -05:00
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
703fb9d4a1
update-ndGarage_ndbit6_v2
2020-07-23 16:08:30 -06:00
060ab8a1f0
Merge pull request #3194 from tannewt/gcc10
...
Prep for GCC10
2020-07-23 14:39:21 -07:00
1ee8a09da2
add-ikigaisense_vita-nRF52840
2020-07-23 14:39:59 -06:00
6a46fd5b91
Merge pull request #3185 from hierophect/esp32-pulseio
...
ESP32-S2: PWMOut
2020-07-23 13:11:33 -07:00
cf0a4d208e
Fix unintended timer reset, style changes
2020-07-23 14:01:10 -04:00
2bd6d05663
Add externs. GCC10 complains about duplicate defines
2020-07-22 16:26:46 -07:00
61a2e4f94b
Add PWMOut
2020-07-22 16:34:18 -04:00
c1f731d62e
Claim USB pins at startup to prevent overwrites
2020-07-22 14:22:05 -04:00
e232ec10ce
Merge branch 'main' into stm32-timer-allocator
2020-07-22 13:59:39 -04:00
138189bad1
Free timers when modules de-init
2020-07-22 13:58:57 -04:00
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
39e01c3938
Merge pull request #14 from adafruit/main
...
update from main
2020-07-22 11:30:49 -05:00
8ff2846bb2
Disable countio on circuitbrains basic
2020-07-21 16:21:49 -07:00
db5c3c9676
dded optimization for esp32s2
2020-07-21 17:54:47 -05:00
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack
...
Enable PYSTACK to keep function state out of the heap
2020-07-21 13:38:52 -07:00
5e3a853db4
Turn off GC opt on uchip board
2020-07-21 12:51:59 -07:00
678faff464
Be more aggressive with uChip build
2020-07-21 11:02:23 -07:00
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
0c6935e336
Merge branch 'main' into disable_network
2020-07-20 16:28:22 -07:00
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc
...
Add _bhb user module for Big Honking Button
2020-07-20 16:24:36 -07:00
7ba89f5330
Add _bhb user module for Big Honking Button
...
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
2020-07-18 22:45:08 -07:00
11ef43b071
pewpew_m4: Disable USB_HID back
...
German translation fails to build, so I have to disabled USB_HID after
all.
2020-07-18 20:09:30 +02:00
8d692f33a8
pewpew_m4: Enable analogio and usb_hid
...
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.
If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
2020-07-18 19:30:40 +02:00
610e0171aa
Disable existing native networking.
...
We're moving towards a co-processor model and a Wiznet library is
already available.
New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
2020-07-17 17:43:02 -07:00
207369ec09
Add boilerplate, create basic PWMOut test
2020-07-17 17:28:23 -04:00
9cdf5e148a
Merge pull request #2879 from jepler/background-callback
...
Use a linked list of background tasks to perform
2020-07-17 15:46:03 -05:00
6912d31560
uchip: reclaim some flash space
2020-07-17 14:32:05 -05:00
6494bbdc64
snapshot
2020-07-16 23:14:49 -04:00
dc6902a33e
Exclude timers from H7 builds
2020-07-16 17:11:24 -04:00
6a49766df0
Fix pulseIO reset and frequency issues, remove IRQ conflict
2020-07-16 15:45:18 -04:00
72f6d7ee21
Merge pull request #3155 from jepler/esp32s2-parallel-build
...
esp32s2: Take care to invoke the sub-build-system only once
2020-07-16 11:26:53 -07:00
7bb508bf43
Merge pull request #3157 from tinkeringtech/tinkeringtech-scoutmakes-azul
...
Addition of Tinkeringtech ScoutMakes Azul nRF52840 based platform to CircuitPython
2020-07-16 11:03:31 -07:00
49fcfd14d2
Added the TinkeringTech ScoutMakes Azul platform to CircuitPython
2020-07-15 21:49:34 -04:00
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
6160d11c5a
supervisor: factor out, Handle USB via background callback
2020-07-15 11:49:44 -05:00
a2919a6fb2
esp32s2: Use the device's EUI-48 address as unique ID
...
On my hardware, esptool reports
MAC: 7c:df:a1:02:6c:b8
after this change, the USB descriptor says SerialNumber: 7CDFA1026CB8
and microcontroller.cpu.id has
>>> "".join("%02x" % byte for byte in microcontroller.cpu.uid)
'c7fd1a20c68b'
Note that the nibble-swapping between USB and cpu.uid is typical.
For instance, an stm32 board has USB SerialNumber
24002500F005D42445632302 but hex-converted microcontroller.cpu.id
420052000f504d4254363220.
2020-07-15 11:45:13 -05:00
910f69c42b
esp32s2: Take care to invoke the sub-build-system only once
...
This allows "make -j" in the outer build system to function properly,
with a potentially large decrease in build times on high end desktop
systems.
2020-07-15 10:30:07 -05:00
742aa740f6
samd: audio: Move to background callback
...
Testing performed: Played half of the Bartlebeats album :) :)
2020-07-15 09:26:47 -05:00
dc74ae83da
nRF: Always use sd_nvic_critical_region calls
...
The motivation for doing this is so that we can allow
common_hal_mcu_disable_interrupts in IRQ context, something that works
on other ports, but not on nRF with SD enabled. This is because
when SD is enabled, calling sd_softdevice_is_enabled in the context
of an interrupt with priority 2 or 3 causes a HardFault. We have chosen
to give the USB interrupt priority 2 on nRF, the highest priority that
is compatible with SD.
Since at least SoftDevice s130 v2.0.1, sd_nvic_critical_region_enter/exit
have been implemented as inline functions and are safe to call even if
softdevice is not enabled. Reference kindly provided by danh:
https://devzone.nordicsemi.com/f/nordic-q-a/29553/sd_nvic_critical_region_enter-exit-missing-in-s130-v2
Switching to these as the default/only way to enable/disable interrupts
simplifies things, and fixes several problems and potential problems:
* Interrupts at priority 2 or 3 could not call common_hal_mcu_disable_interrupts
because the call to sd_softdevice_is_enabled would HardFault
* Hypothetically, the state of sd_softdevice_is_enabled
could change from the disable to the enable call, meaning the calls
would not match (__disable_irq() could be balanced with
sd_nvic_critical_region_exit).
This also fixes a problem I believe would exist if disable() were called
twice when SD is enabled. There is a single "is_nested_critical_region"
flag, and the second call would set it to 1. Both of the enable()
calls that followed would call critical_region_exit(1), and interrupts
would not properly be reenabled. In the new version of the code,
we use our own nesting_count value to track the intended state, so
now nested disable()s only call critical_region_enter() once, only
updating is_nested_critical_region once; and only the second enable()
call will call critical_region_exit, with the right value of i_n_c_r.
Finally, in port_sleep_until_interrupt, if !sd_enabled, we really do
need to __disable_irq, rather than using the common_hal_mcu routines;
the reason why is documented in a comment.
2020-07-15 09:26:47 -05:00
818b96ae61
Fix IRQ enum protections
2020-07-14 16:33:36 -04:00
90ad9beff5
Merge pull request #3136 from xiongyihui/master
...
Add 2 boards nRF52840 M.2 devkit and M60 Keyboard
2020-07-13 17:14:18 -07:00
51c888d4be
Merge pull request #3003 from Flameeyes/master
...
License tagging according to REUSE specifications.
2020-07-13 16:28:49 -07:00
d712d1281c
Merge branch 'main' into master
2020-07-13 15:53:44 -07:00
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level
...
SAMD: make the brownout detection level configurable per board
2020-07-13 16:26:11 -04:00
b8910676db
Add missing enum preprocessor protection
2020-07-13 11:52:30 -04:00
f6869c69c5
wip: advertising; not tested
2020-07-12 19:45:23 -04:00
c8752ff93e
use RGB LEDs as status indicators
2020-07-11 21:25:32 +08:00
8e26fdc0e9
add LED status, remove unused macros
2020-07-11 10:51:31 +08:00
742f9cfdb0
Fluff M0: additional pins on version 1.3 of the board
2020-07-10 20:40:58 +02:00
7ff499046b
use VID & PIDs granted by Seeed
2020-07-11 00:37:45 +08:00
eb86010176
Enable RGB Matrix
2020-07-10 11:06:12 -04:00
0068c76fa6
Merge pull request #3135 from arms22/bless_dev_board_multi_sensor
...
Add new board BLE-SS dev board Multi Sensor
2020-07-09 10:29:57 -07:00
edc48a505f
Complete F405 pin and periph definitions
2020-07-09 13:10:18 -04:00
2bcc5c06c2
Fix advanced claimed pin/package timer search
2020-07-09 11:42:37 -04:00
678f266394
fix pre-commit check
2020-07-09 10:25:46 +00:00
e0733d153e
SAMD: configurable brownout, separate the variables
2020-07-09 12:17:07 +02:00
96f6ce222c
add makerdiary m60 keyboard
...
Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>
2020-07-09 10:02:27 +00:00
e81d22cd67
add makerdiary nrf52840 m.2 devkit
...
Signed-off-by: Yihui Xiong <yihui.xiong@hotmail.com>
2020-07-09 10:01:04 +00:00
bb5cdcf954
Add new board BLE-SS dev board Multi Sensor
2020-07-09 11:26:45 +09:00
9c38f5dcb1
Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator
2020-07-08 16:03:12 -04:00
ce214e82a5
Merge pull request #3127 from Arudinne/Raytac_MDBT50Q-DB-40
...
Add new board Raytac MDBT50Q-DB-40
2020-07-08 11:34:56 -07:00
83a27edd20
SAMD: make the brownout detection level configurable per board
...
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.
In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
2020-07-08 19:59:53 +02:00
768149fb01
modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-08 10:36:41 -05:00
5a9aac472a
modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-07 14:37:59 -05:00
57ab4f1329
stm: SPI: revamp pin search code
...
I discussed with Hierophect on Discord about how to "de-nest" the code
for configuring SPI objects on STM, because the problems with one
nesting level per pin becomes unmanageable with the up to 10 pins of
SDIO.
This code (which is only compile-tested so far) demonstrates the concept
we discussed.
The SCK pin is always required. Loop over all possibilities of the SCK
pin. When we are considering a particular item in the mcu_spi_sck_list
we have now become committed to using a particular periph_index. If all
the other pins can be satisfied by that periph_index, then we have a
working combination. Once we have a working combination that is not
reserved, we can return that combination. On reaching the end, we have
checked all the possible possibilities and can give the same errors as
before: One if there was a possibility that worked but was reserved;
and another if no possibility worked.
2020-07-07 14:37:50 -05:00
dc2f729d19
modified: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.mk
...
modified: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-07 14:37:08 -05:00
b5af05cd31
new file: ports/nrf/boards/raytac_mdbt50q-db-40/board.c
...
new file: ports/nrf/boards/raytac_mdbt50q-db-40/bootloader/6.0.0/pca10056_bootloader_6.0.0_s140.zip
new file: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.h
new file: ports/nrf/boards/raytac_mdbt50q-db-40/mpconfigboard.mk
new file: ports/nrf/boards/raytac_mdbt50q-db-40/pins.c
2020-07-07 12:27:23 -05:00
965a4961ce
Merge pull request #3120 from DavePutz/issue#3049
...
Issue#3049 -PulseIn not working in CP5.4
2020-07-07 08:59:22 -07:00
0932b64ae7
Correct for SAMD51 build
2020-07-06 23:25:33 -05:00
1b3cb17abd
Corrected file for SAMD51 build
2020-07-06 21:47:11 -05:00
ab4a453006
Made requested changes
2020-07-06 21:40:38 -05:00
a7844205bd
Merge pull request #3123 from kamtom480/sdk2.0
...
spresense: update SDK to 2.0.1
2020-07-06 15:09:46 -07:00
846f01b2c8
Merge pull request #3113 from ansonhe97/main
...
ADD: Added Wio Terminal's functional pins and LCD driver to board init
2020-07-06 14:50:47 -07:00
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
2f80460a2f
Fluff M0: additional pins on version 1.3 of the board
2020-07-06 19:15:41 +01:00
97355f8fb7
spresense: update SDK to 2.0.1
2020-07-06 17:13:28 +02:00
ac33c3fe2c
Implementation of continuous synchronization of RTC during pulsein
...
Flags and code to implement continuous synchronization of RTC during pulsein
2020-07-04 21:17:19 -05:00
94d90742dd
Implementation of RTC continuous synchronization during pulsein
...
Flags and code to implement RTC continuous synchronization during pulsein
2020-07-04 21:15:38 -05:00
e514782cc6
update-with-new-usb-PID
2020-07-04 10:39:21 -06:00
36ef3476de
Fix depreciate terminology
2020-07-04 11:21:58 +08:00
c72e3536f1
Merge remote-tracking branch 'upstream/main' into stm32-timer-allocator
2020-07-03 09:50:05 -04:00
2ecb46f192
Fix CI
2020-07-03 13:42:27 +08:00
2a92cf8d8b
ADD: Added LCD driver to board init
2020-07-03 12:44:20 +08:00
49aacc8596
ADD: Fixed wrong SPI pins and added more functional pins
2020-07-03 12:43:21 +08:00
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0
...
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 15:43:32 -07:00
fce35c3481
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 22:57:58 +02:00
4a21426377
Merge pull request #3103 from hierophect/stm32-simplex-spi-fix
...
STM32: add debug flags, fix hang in simplex SPI
2020-07-02 13:42:08 -07:00
4b66483757
Update submodule, revert direction change
2020-07-02 15:38:37 -04:00
f4a2474447
spresense: Add support for sdioio
2020-07-02 15:26:59 +02:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
87d58b3b0a
STM32: add debug flags, fix hang in simplex SPI
2020-07-01 17:48:10 -04:00
367d3800fc
Return false if we already have the lock
2020-07-01 14:35:25 -07:00
0537f4e775
restore-ndgarage_ndbit6-to-original
2020-07-01 14:12:52 -06:00
c759c9a2aa
add-ndgarage_ndbit6_v2-update
2020-07-01 13:58:07 -06:00
b80dbb4b2c
add-ndgarage_ndbit6_v2
2020-07-01 12:06:59 -06:00
ab9a64eafa
Add timer allocator, adjust pulsio to use general purpose timers
2020-07-01 10:35:49 -04:00
3a17a79bf2
Merge pull request #3094 from kamtom480/mkspk
...
spresense: add elf32.h for mkspk
2020-07-01 06:58:40 -05:00
d4e28dd233
ADD: added more special pins on Wio Terminal
2020-07-01 17:06:26 +08:00
11cb3e3b4b
hci skeleton done; not working yet
2020-06-30 23:19:40 -04:00
5028804878
Remove fixed pointers and check UART return
2020-06-30 15:29:42 -07:00
74ad5e80ce
Merge pull request #3089 from ansonhe97/main
...
Add: added Seeed's Wio Terminal Board Support
2020-06-30 10:58:24 -07:00
69b3d47564
Fix other esp builds
2020-06-29 18:21:53 -07:00
965a40b6a1
Fix cxd56 function signature
2020-06-29 17:17:46 -07:00
111f7ddf69
Merge pull request #2863 from jepler/sdcard-in-core
...
Sdcard in core
2020-06-29 16:49:58 -07:00
4613f80d7a
Fix end of line
2020-06-29 17:41:48 +08:00
0dd17f4418
Add: Added Seeed Wio Terminal board support
2020-06-29 16:22:41 +08:00
bbedd43273
change CMake verision requirement
2020-06-27 13:27:42 -04:00
7f6bef3251
Remove debug prints
2020-06-26 16:56:17 -07:00
08749630a2
Fix SPI RX and remove debug prints
2020-06-26 16:30:24 -07:00
2d579cc995
Use NULL for deinited DigitalInOut
...
This fixes a Display issue where no backlight pin is given but it's
still deinitialized.
2020-06-26 12:33:50 -07:00
a9f257bcd6
Store host_id so that never reset works
2020-06-26 12:32:56 -07:00
c5db97c50f
atmel-sam: sdio: disable debug prints by default
2020-06-26 13:16:16 -05:00
0f074fb956
Merge pull request #3072 from PTS93/patch-2
...
Update minimum required cmake to 3.16
2020-06-26 10:02:24 -07:00
f496c0b58d
atmel-samd: Add SDIO SD card interface
2020-06-26 11:50:42 -05:00
d4b9458512
samd: sdio: Add needed files from atmel start
2020-06-26 11:50:41 -05:00
57fde2e07b
sdcardio: implement new library for SD card I/O
...
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
9ec9644928
Merge pull request #3071 from jgillick/jeremy/stm-nvm-flash
...
STM32 (ThunderPack) - Move NVM sector to increase program size.
2020-06-26 09:45:26 -07:00
3e616ccead
update submodules
2020-06-26 12:21:57 -04:00
017c188ab5
Move NVM block to increase program size.
2020-06-25 21:46:15 -07:00
759929c24a
hci early wip; refactor supervisor bluetooth.c for nrf: tested
2020-06-25 20:57:17 -04:00
a80d7479d0
Update minimum required cmake to 3.16
...
Earliest tested version that compiles.
Failed with version 3.10
2020-06-26 02:04:14 +02:00
0a41b86f6b
Fix typo inserting IDF_PATH variable
2020-06-26 01:36:03 +02:00
6c91af7d56
WIP
2020-06-25 17:27:01 -04:00
103ad9966a
remove machine_i2c, machine_spi
...
This micropython code is not used in circuitpython
2020-06-25 11:44:21 -05:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
07eb7d653c
Merge pull request #3042 from kamtom480/gnss
...
Add gnss module
2020-06-25 11:08:40 -05:00
076a96ccc6
Merge pull request #3046 from jepler/same51
...
Add basic SAM E54 support and SAM E54 Xplained board
2020-06-25 06:55:27 -05:00
436b15e558
spresense: add elf32.h for mkspk
2020-06-25 10:26:33 +02:00
d768d4d37a
Merge branch 'main' into gnss
2020-06-24 17:17:43 -07:00
03e5043af4
Turn off Idle WDT and speed up CPU
2020-06-24 13:10:31 -07:00
ed6e81d688
Switch SPI to polling DMA and enable displayio
2020-06-24 13:10:08 -07:00
496e16d99b
Handle memory (hopefully). Short TX works
2020-06-24 12:47:59 -07:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
fc9c0ba573
Initial SPI implementation. Almost certainly doesn't compile
2020-06-24 12:47:59 -07:00
f52f60b17d
Add UF2 build target
2020-06-24 12:47:59 -07:00
7b56617f8e
Turn off stub so flash works over native usb
2020-06-24 12:47:58 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
6f050d7af3
Add pull up testing, proper us delay and stop supporting 45 and 46 for I2C
2020-06-24 12:47:58 -07:00
ae52d052cb
Fix I2C thanks to Mark!
2020-06-24 12:47:58 -07:00
d0401f02a9
Add initial I2C support, not quite working fully though
2020-06-24 12:47:58 -07:00
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices
...
Compute USB_DEVICES instead of requiring it to be specified
2020-06-24 13:31:56 -05:00
ab4c09cea7
gnss: Add timestamp
2020-06-24 11:14:44 +02:00
3509dad5b3
gnss: Remove start and stop
2020-06-24 11:14:44 +02:00
343f093ead
spresense: Add support for GNSS
2020-06-24 11:14:44 +02:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
f67b307371
Merge pull request #3045 from k0d/stm32_alignment_issue
...
Fixes issue with memory alignment in STM32
2020-06-23 10:54:08 -07:00
93d3629da2
stm: Sort configuration options and make them all conditional
...
This makes them all overridable on the board level, tersely
2020-06-23 11:02:38 -05:00
0110463811
stm: Disable USB MIDI and most USB HID
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 11:01:36 -05:00
3f112d28e3
mimxrt10xx: Disable USB MIDI
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 10:57:32 -05:00
458eef052e
esp32s2: Disable USB MIDI
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 10:57:25 -05:00
38659b566c
atmel-samd: Finish disabling USB MIDI and/or HID on certain boards
2020-06-23 10:56:27 -05:00
d5074220a8
atmel-samd: Add SAM E54 Xplained board
...
Few peripherals are actually tested. However, USB, I2C and GPIO seem to work.
Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.
The default SPI, I2C, and UART are the ones on the EXT2 header. This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00
da733c01da
atmel-samd: Add support for SAM E54 family MCUs
...
This introduces the new macro SAM_D5X_E5X. This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
2020-06-23 10:41:48 -05:00
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board
...
PID request for a new board configuration
2020-06-22 15:09:42 -07:00
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay
...
delay 1ms on SAMD51 when reading processor voltage
2020-06-22 14:29:43 -07:00
d43449a6d6
sparkfun samd51 thing plus: Fix board.I2C()
...
This had the SDA and SCL pins transposed, so nothing worked.
2020-06-22 10:45:27 -05:00
a770b5a919
never_reset_pin: Move pin validity check before first use of pin number
2020-06-22 10:45:27 -05:00
6638bc32c3
samd: Makefile: Regularize whitespace
2020-06-22 10:45:27 -05:00
8a760b0657
stm: Pin.c: Compute GPIO_PORT_COUNT instead of specifying manually
2020-06-22 10:45:27 -05:00
a580f0f1c4
_pew: move to common-hal
...
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10). Move it.
There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
5a3a0a5092
stm: Makefile: sort files in SRC_STM32
2020-06-22 10:45:23 -05:00
1687c8b1e3
delay 1ms on SAMD51 when reading processor voltage
2020-06-19 15:25:04 -04:00
b316549590
Added the new assigned VID/PID pair
2020-06-19 19:26:29 +03:00
178be2e3c9
loc_ber_m4_base_board
2020-06-19 18:56:20 +03:00
23da0fa99c
Fixes issue with memory alignment in STM32
...
When compiling with optimizations on, an issue occurs where the claimed_pins/never_reset_pins memory location is shared with another variable. This causes some bad memory read, so the USB pins ended up being reset. Setting these to have an alignment of 4 bytes resolves this.
Tested on nucleo_f746zg
2020-06-18 00:51:04 +02:00
a345223dac
Merge pull request #3031 from jepler/improve-shared-bindings-links
...
docs: Improve 5.0.x <-> main branch doc linkrot
2020-06-16 11:49:27 -07:00
fd4aafacbe
Add port D to LQFP64
2020-06-16 12:33:15 -04:00
9d5ccccf7d
cxd56: Disable HID and MIDI
...
These are already disabled via the USB_DEVICES setting, but the code is
included anyway.
2020-06-15 15:22:45 -05:00
a9614bb964
cxd56: Sort the configuration settings
2020-06-15 15:22:45 -05:00
2aac3cbdce
Revert I2C timing overrides, reduce scope to module only
2020-06-15 13:51:09 -04:00
3c3cad5ae6
docs: Improve 5.0.x <-> main branch doc linkrot
...
This improves, but does not entirely fix, the broken links that result
from the autoapi change. It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
2020-06-14 11:12:35 -05:00
e27f68ffe7
Merge pull request #3025 from hierophect/stm32-f7-startup
...
STM32: Add DTCM and ITCM support to F7 series
2020-06-11 11:03:48 -07:00
724637faa3
Move I2C speed to clock-style definition
2020-06-11 11:17:51 -04:00
c08702414e
Add macros for setting correct F7 and H7 I2C timing
2020-06-10 16:36:44 -04:00
bf3a5afca1
Merge branch 'stm32-f7-startup' into stm32-i2cspeed
2020-06-10 16:16:15 -04:00
c88a8e66c6
Minor comment fix
2020-06-10 13:22:21 -04:00
7cc8b784c3
Add missing openmv definitions
2020-06-10 10:31:24 -04:00
b414f82669
Add DTCM and ITCM support to F7 series
2020-06-09 18:01:52 -04:00
9b8d648986
Merge pull request #3020 from DavePutz/issue2958
...
Issue #2958 Correct calculation of subticks being returned from port_get_raw_ticks() for esp32s2
2020-06-09 12:41:18 -07:00
ec7a3feeba
Redid formula for calculating subticks
...
changed subticks calculation to give a range from 0 to 32767.
2020-06-09 10:08:49 -05:00
0ba541d498
Merge pull request #3017 from Nicell/nice_nano
...
Add nice!nano board support
2020-06-08 14:47:22 -07:00
d8bb2d7c6d
Correct ticks being returned from port_get_raw_ticks()
...
Issue #2958 . Correct calculation of usec back to ticks in port_get_raw_ticks().
2020-06-08 10:52:27 -05:00
004d644184
Merge pull request #3009 from hierophect/stm32-LSE-startup-fix
...
STM32: Rework LSE clock init, allow clock overrides
2020-06-07 22:37:53 -07:00
33496e9c68
Add nice!nano board support
2020-06-05 19:58:54 -05:00
93cffaa87e
Fix pin macros typo, add extra flash protection
2020-06-05 16:43:08 -04:00
ad0971fb25
Override HAL_Delay and HAL_GetTick
2020-06-05 13:56:32 -04:00
6400113bb9
Merge pull request #3001 from hierophect/mimxrt-teensy-boot
...
mimxrt10xx: Disable pin_reset on 1060 boards
2020-06-05 10:28:53 -07:00
a0977cac7b
Merge remote-tracking branch 'upstream/master' into stm32-LSE-startup-fix
2020-06-04 16:15:38 -04:00
74effeeefd
Add temporary fix warning
2020-06-04 13:30:07 -04:00
d14e34449b
Rework LSE clock init, allow clock overrides
2020-06-04 13:21:29 -04:00
c93ccd1e91
Disable pin resets on the 1060
2020-06-03 12:07:08 -04:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
b5b9a56918
Update teensy 4.0/4.1 pin protections
2020-06-02 18:05:59 -04:00
db04fd1725
Merge pull request #2933 from simmel-project/wdt-nrf
...
Add Watchdog timer and add support for NRF watchdog
2020-06-02 10:33:24 -07:00
ed8a52d1db
litex: remove call to `board_init()`
...
These calls were all moved into `main.c`, however this call was not
removed from litex. As a result, litex was calling `board_init()` twice.
This is currently not a problem, as `fomu` is able to be initialized
twice without issue, however future boards may have issue with this.
This fixes #2991 .
Signed-off-by: Sean Cross <sean@xobs.io>
2020-06-02 10:19:40 +08:00
959f7297da
Merge remote-tracking branch 'adafruit/master' into wdt-nrf
2020-06-01 17:01:16 -07:00
4146d6f872
Merge pull request #2890 from jepler/nrf-audio-tick
...
nrf: put supervisor enable/disable tick in place
2020-06-01 15:51:22 -07:00
dd2cd6f002
Merge pull request #2979 from hierophect/stm32-remove-crystals
...
STM32: Set correct crystal settings on Discovery boards
2020-06-01 15:21:39 -07:00
323cca8910
Merge remote-tracking branch 'adafruit/master' into wdt-nrf
2020-06-01 15:18:12 -07:00
75eb44f234
Note temporary issue with Nucleo boards
2020-06-01 12:26:08 -04:00
ce337eaa27
Fix port_get_raw_ticks
2020-06-01 11:35:46 +02:00
4667d4de8c
Merge pull request #2975 from dhalbert/aesio-nrf52840
...
enable aesio on all nRF52840 boards
2020-05-29 14:07:30 -04:00
0fe7efdf36
Set correct crystal settings on Discovery boards
2020-05-29 14:01:34 -04:00
ddcae19254
Merge pull request #2964 from hierophect/mimxrt-busio-cleanup
...
mimxrt10xx: Busio cleanup and bugfixes
2020-05-29 10:42:16 -07:00
2fd7a43f2f
Merge remote-tracking branch 'adafruit/master' into wdt-nrf
2020-05-29 10:16:24 -07:00
fe75c7793c
Fix SWO/Analog overlap, style changes
2020-05-29 12:19:37 -04:00
0d2fee95e2
enable aesio on all nRF52840 boards
2020-05-29 11:06:30 -04:00
2fb4fa3289
Spill registers before scanning the stack.
...
From the change:
// xtensa has more registers than an instruction can address. The 16 that
// can be addressed are called the "window". When a function is called or
// returns the window rotates. This allows for more efficient function calls
// because ram doesn't need to be used. It's only used if the window wraps
// around onto itself. At that point values are "spilled" to empty spots in
// the stack that were set aside. When the window rotates back around (on
// function return), the values are restored into the register from ram.
// So, in order to read the values in the stack scan we must make sure all
// of the register values we care about have been spilled to RAM. Luckily,
// there is a HAL call to do it. There is a bit of a race condition here
// because the register value could change after it's been restored but that
// is unlikely to happen with a heap pointer while we do a GC.
Fixes #2907
2020-05-28 18:34:14 -07:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
a9419b5d46
Update ESP IDF
2020-05-28 15:38:48 -07:00
9ee278d2ac
Merge remote-tracking branch 'upstream/master' into mimxrt-busio-cleanup
2020-05-28 12:24:37 -04:00
fd00bb8b7f
Fix pin reset flash conflict error
2020-05-28 12:15:21 -04:00
9380c34cf7
Merge remote-tracking branch 'adafruit/master' into wdt-nrf
2020-05-27 10:47:08 -07:00
0db8b888d3
Merge pull request #2934 from hierophect/mimxrt-uart-oneway
...
mimxrt10xx: add one-directional UART
2020-05-27 10:38:00 -07:00
a59798ed49
Merge branch 'mimxrt-uart-oneway' into mimxrt-busio-cleanup
2020-05-27 12:31:16 -04:00
9f5520135c
translations
2020-05-27 11:54:52 -04:00
a25e10ed59
Merge branch 'mimxrt-uart-oneway' of https://github.com/hierophect/circuitpython into mimxrt-uart-oneway
2020-05-27 11:49:11 -04:00
1e914ac2b0
Change exception text and type
2020-05-27 11:48:52 -04:00
d06a7c4671
Correct HiiBot BlueFi USB_PID
...
Donated a PID set for HiiBot BlueFi.
2020-05-27 11:47:15 -04:00
53fb699436
Add pin resetting across boards, fix array size detection issue
2020-05-27 11:45:15 -04:00
ad988013f0
Merge pull request #2961 from arturo182/i2c-exception
...
mimxrt10xx: Change exception type to match other ports
2020-05-27 11:24:46 +02:00
aac5a4f178
watchdog: use common_hal_watchdog_* pattern
...
This pulls all common functionality into `shared-bindings` and keeps
platform-specific code inside `nrf`. Additionally, this performs most
validation in the `shared-bindings` site.
The only validation that occurs inside platform-specific `common-hal`
code is related to timeout limits that are platform-specific.
Additionally, all documentation is now inside the `shared-bindings`
directory.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:38:29 +08:00
e470376c12
nrf: add ticks (not subticks) to overflow count during reset
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
296ba101ec
nrf: set WDT priority to 2
...
The previous setting of `1` meant that the bluetooth system couldn't be
used when the watchdog timer was enabled.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
d0f1b59be5
nrf: pca10100: disable some unused features to shrink image
...
This removes some features that are largely unused in order to get the
image to fit.
Recommended in
https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632859678
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
33001f4e19
nrf: simmel: shrink filesystem to fit watchdog timer
...
The watchdog timer has increased the amount of code and text that's
required.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
daf7c2857d
nrf: port: save rtc value across reboots
...
As part of the reset process, save the current tick count to an
uninitialized memory location. That way, the current tick value will be
preserved across reboots.
A reboot will cause us to lose a certain number of ticks, depending on
how long a reboot takes, however if reboots are infrequent then this
will not be a large amount of time lost.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
5edc29c6a5
nrf: microcontroller: use port reset path
...
For `microcontroller.reset()`, don't manually call NVIC_SystemReset().
Instead, call the `port_reset()` in case the port wants to do any
cleanup.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
c7efc94a33
watchdog: move timeout exception to shared-bindings
...
Make this exception globally available to all platforms that have
enabled the watchdog timer.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
c5c13a8ba1
nrf: reset watchdog as part of port_reset()
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
108409c6cd
nrf: common-hal: finish reworking exceptions
...
This finishes the rework of the exception handler, which is once
again stored inside the watchdog timer module.
This also implements a `watchdog_reset()` that is used to disable the
RAISE watchdog, if one is enabled.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
bd086a102e
Revert "add WatchDogTimeout exception"
...
This reverts commit 561e7e619095869f58fc728d428f3ff20e8bfc40.
2020-05-27 11:28:49 +08:00
589cb1af6d
nrf: watchdog: use nrfx_wdt driver
...
Instead of directly poking registers, use `nrfx_wdt`.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
e738f5eaa1
nrf: boot into safe mode sometimes for watchdog reset
...
If the watchdog resets the system and we're plugged into USB, boot into
safe mode.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
08362c9cab
watchdogtimer: refactor to new api
...
This refactors the WatchDogTimer API to use the format proposed in
https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632268227
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
ae950bc050
add WatchDogTimeout exception
...
This adds an exception to be raised when the WatchDogTimer times out.
Note that this currently causes a HardFault, and it's not clear why it's
not behaving properly.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
0169ea5155
nrf: discard arm exception sections
...
Since these exceptions are unused, don't include them in the output
binary.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
8f46133917
nrf: watchdog: implement software watchdogtimer
...
This adds a software WatchDogTimer implementation that can be used for
testing.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
595f6387c2
watchdog: rename module from `wdt` and move to `microcontroller`
...
This also places it under the `microcontroller` object.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
c23f151b6b
nrf: enable wdt for all platforms
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
fbe1c05832
nrf: simmel: enable wdt support
...
This enables WDT support for Simmel. Other platforms cannot yet use
WDT because it overflows their flash storage.
Enable CIRCUITPY_WDT support for the nrf target.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
abd01c5fbb
nrf: add watchdog module
...
Add common-hal bindings to allow the watchdog module to be used
on nrf platforms.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
17ef2df2ca
nrf: ld: add ARM.exidx to output image
...
With the WDT changes, building Circuit Python results in the following error:
/opt/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx LMA [00000000000621c8,00000000000621cf] overlaps section .data LMA [00000000000621c8,0000000000062383]
This is because unwinding data is getting generated, but has nowhere to go.
Re-enable this data in the linker script so it is saved.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio
...
Finish digitalio and pin use tracking for ESP32S2
2020-05-26 19:18:45 -04:00
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi
...
fix racing issue for SAMD when executing WFI
2020-05-26 14:54:24 -07:00
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894
...
Add an increment to tcc_refcount to allow deinit to work correctly
2020-05-26 14:39:59 -07:00
d6c59c4de0
mimxrt10xx: Change exception type to match other ports
2020-05-26 22:36:30 +02:00
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0
...
Add support for Fluff M0
2020-05-26 13:18:55 -07:00
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
19f0d82048
Merge pull request #2955 from BradChan/master
...
Add hiibot_bluefi board definitions
2020-05-26 15:37:35 -04:00
4974c933b1
Fix swapped SCK and MISO in Fluff M0
2020-05-26 03:29:05 +02:00
f1436410bd
Merge pull request #2951 from jepler/remove-modules-to-fit-translations
...
Remove modules to fit translations
2020-05-25 09:51:57 -04:00
e79340601f
fix racing issue for SAMD when executing WFI
2020-05-25 20:51:02 +07:00
5cffd7e88d
trinket_m0_haxpress: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
eb85304d04
escornabot: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
03866c0598
meowmeow: disable modules to make build fit with upcoming translations
2020-05-23 20:41:25 -05:00
2ed40075a5
pyruler: disable RTC to make build fit with upcoming translations
2020-05-23 20:36:33 -05:00
d95022f7bb
Merge remote-tracking branch 'upstream/master' into mimxrt-busio-cleanup
2020-05-22 13:33:08 -04:00
4c01ddcbab
Add support for Fluff M0
2020-05-22 18:51:12 +02:00
fe10a45533
Merge branch 'master' into mimxrt-uart-oneway
2020-05-22 11:32:41 -04:00
75b5142954
Minor style changes and translations
2020-05-22 11:31:52 -04:00
93df3b89e8
allow PORT specifcation for esp32s2 flashing
2020-05-22 09:54:29 -04:00
2e05f628f0
Add an increment to tcc_refcount to allow deinits to work properly
2020-05-21 11:08:26 -05:00
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio
2020-05-21 08:52:39 -07:00
67cf005ee5
nrf: nvm: assume sd is not enabled if interrupts are off
...
If interrupts are disabled, then calling sd_* functions will hardfault.
Instead, assume that it's safe to write if interrupts are disabled.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-21 22:04:20 +08:00
fd4ef233c6
nrf: port: add memory barrier before wfi
...
ARM recommends issuing a DSB instruction propr to issuing WFI, as it is
required on many parts suchas Cortex-M7. This is effectively a no-op on
the Cortex-M4 used in most NRF parts, however it ensures that we won't
be surprised when new parts come out.
See
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0321a/BIHICBGB.html
for more information.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-21 21:46:37 +08:00
77cf4dce8f
nrf: disable interrupts before running wfi
...
In order to ensure we don't have any outstanding requests, disable
interrupts prior to issuing `WFI`.
As part of this process, check to see if there are any pending USB
requests, and only execute the `WFI` if there is no pending data.
This fixes #2855 on NRF.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-21 21:43:52 +08:00
4f54514be4
Initial version
2020-05-20 21:11:06 -05:00
c32214ccc7
Merge pull request #2932 from simmel-project/nrf-rtc-reset
...
nrf: reset rtc as part of port_reset()
2020-05-20 11:39:16 -07:00
a43876ad1e
Fix esp wrover
2020-05-20 11:37:29 -07:00
0af5dd59f2
Merge pull request #2898 from hierophect/mimxrt-claiming
...
MIMXRT: Implement pin claiming, pin reset, and pin protections
2020-05-20 11:32:22 -07:00
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-20 10:48:27 -07:00
66c09efae2
Add UART one-way instance search, fix bugs in stm32 implementation
2020-05-20 12:48:01 -04:00
fd0420d432
Update digitalio api for other ports
2020-05-20 09:23:42 -07:00
4cca455c9b
nrf: reset rtc as part of port_reset()
...
On NRF, the `rtc_reset()` function is never called. As a result,
calls to `time.time()` return a cryptic error>
```
>>> import time
>>> time.time()
'' object has no attribute 'datetime'
>>>
```
This is because `MP_STATE_VM(rtc_time_source)` is not initialized
due to `rtc_reset()` never being called.
If `CIRCUITPY_RTC` is enabled, call `rtc_reset()` as part of the
`reset_port()` call. This ensures that `time.time()` works as expected.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-20 16:44:18 +08:00
80517c4cf6
First try at critical section support
2020-05-19 17:49:17 -07:00
49090d1378
Fully implement digitalio and pin-in-use tracking.
...
Fixes #2901
2020-05-19 17:46:29 -07:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
38fd9c25f2
Re-add APA102
2020-05-19 15:33:34 -04:00
acf4b1bede
Remove reverse methods from per-board defs
2020-05-19 11:43:57 -07:00
b310b04007
Remove pin/port distinction
2020-05-19 14:20:07 -04:00
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins
2020-05-19 10:55:02 -07:00
2acd173e14
Implement core requested changes
2020-05-19 13:54:47 -04:00
c1bcc25b88
nrf: _bleio: clean up timeout calculation
...
The timeout value is calculated by the common-hal layer now, so we don't
need to be quite so clever about calculating it here.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 21:56:39 +08:00
34f91f01c6
bleio: adapter: add advertising timeout and status
...
Add a field to allow specifying a timeout when initiating advertising.
As part of this, add a new property to determine if the device is still
advertising.
Additionally, have the `anonymous` property require a timeout, and set
the timeout to the maximum possible value if no timeout is specified.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:19 +08:00
cfe65742a3
_bleio: support anonymous advertising
...
Add a new parameter to the `start_advertising()` function to enable
anonymous advertising. This forces a call to `sd_ble_gap_privacy_set()`
with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and
`private_addr_type` set to
`BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`.
With this, addresses will cycle at a predefined rate (currently once
every 15 minutes).
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:18 +08:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
03b6f7b87b
Add commend about FreeRTOS stack canary
2020-05-18 17:28:13 -07:00
164628282d
Update TinyUSB and shorten USB task delay
2020-05-18 17:27:49 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2
2020-05-18 16:46:41 -07:00
32617d5f2f
Merge pull request #2925 from arturo182/imx-spi
...
mimxrt1010: Increase max SPI speed
2020-05-18 15:22:42 -07:00
ebfc1f2599
Merge pull request #2926 from arturo182/imx-temperature-fix
...
mimxrt10xx: Fix cpu.temperature crash
2020-05-18 15:20:21 -07:00
af68ddebef
Merge pull request #2924 from simmel-project/nrf-rtc-persist
...
NRF: Persist RTC offset across reboots
2020-05-18 15:06:42 -07:00
9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode
...
Add bytearray.decode() for CPython compatibility
2020-05-18 14:38:45 -07:00
058a73128c
mimxrt10xx: Fix cpu.temperature crash
...
Fixes #2514
2020-05-18 22:30:50 +02:00
f92d53eaab
mimxrt1010: Increase max SPI speed
2020-05-18 22:07:38 +02:00
9f7c26c60d
nrf: port: call common_hal_rtc_init() during init
...
Call the new function to set the RTC, or reset it if the offset is not
valid.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:30 +08:00
83680c41db
nrf: rtc: persist rtc offset across reboots
...
Store the RTC value in the .uninitialized section, but make sure to
flank it with some known values. That way we can determine if the RTC
value has been initialized, or if it's random uninitialized garbage.
As part of this, add a `common_hal_rtc_init()` routine to determine if
the value is correct, or reset it to 0 if it is not valid.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:27 +08:00
3b5f5ddaa6
nrf: port: move saved word into .uninitialized section
...
Circuit Python supports saving a single word of data across reboots.
Previously, this data was placed immediately following the .bss.
However, this appeared to not work, as Circuit Python zeroes out the
heap when it starts up, and the heap begins immediately after the .bss.
Switch to using the new .uninitialized section in order to store this
word across resets.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:25 +08:00
192bb155fa
nrf: port: move the heap after .uninitialized
...
Previously, it was placed following .bss. However, now that there is a
new section after .bss, the heap must be moved forward.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:20 +08:00
f002c784c0
nrf: linker: add a new .uninitialized section
...
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.
The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
4f7b4241a2
add hiibot_bluefi
2020-05-18 09:42:37 +08:00
e175a64036
disable rotaryio in CPX crickit
2020-05-15 20:35:12 -04:00
a57da6b808
Add port_fixed_stack for more spresence
2020-05-15 17:22:41 -07:00
8edb8e87c8
Turn reverse methods off for trinket haxpress
2020-05-15 17:22:22 -07:00
86f865afe0
Turn reverse methods off for cpx_crickit
2020-05-15 16:42:22 -07:00
3c1469b0a5
Add port_fixed_stack for more builds
2020-05-15 16:22:33 -07:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
a3ca9401b4
Shrink crickit build
2020-05-15 18:29:37 -04:00
99538c2414
Implement pin claiming, pin reset, and pin protections
2020-05-15 15:16:51 -04:00
0d8bca92e2
Merge pull request #2810 from dherrada/master
...
Pyi integration
2020-05-15 10:31:05 -07:00
db4dbe0752
Merge pull request #2889 from jepler/gamepad-tick
...
Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick
2020-05-13 11:53:23 -07:00
eb876e21c3
nrf: code style
2020-05-13 10:40:41 -05:00
011acf41c0
nrf: Ensure ticks enabled while playing audio
2020-05-13 10:40:36 -05:00
adef45403b
samd: audio dma: enable/disable supervisor tick as needed
2020-05-13 10:29:36 -05:00
7546d47f77
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-13 08:23:55 -07:00
80129c5a21
Disable countio on trinket haxpress
2020-05-12 18:55:49 -07:00
cde6651721
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-12 18:23:59 -07:00
277e8d528b
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 18:22:57 -07:00
4e8de3c554
Swap sphinx to autoapi and the inline stubs
2020-05-12 17:28:24 -07:00
5a80f5e606
nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size
2020-05-12 15:23:00 -07:00
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio
2020-05-12 12:29:05 -07:00
bc40034a08
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 12:12:51 -07:00
Dan Halbert
Yihui Xiong
Jeff Epler
Dan Halbert
Scott Shawcroft
bleeptrack
Scott Shawcroft
Jeff Epler
Lucian Copeland
Jerry Needell
root
DavePutz
sabas1080
Joey Castillo
hathach
ansonhe97
Taku Fukada
Radomir Dopieralski
Chris Burton
ikigaisense
ikigaisense
Thea Flowers
TinkeringTech
arms22
Arudinne
Diego Elio Pettenò
Kamil Tomaszewski
svgops
jgillick
Timon
Jeff Epler
Florin Trutiu
Mark Olsson
Nick
Sean Cross
arturo182
jason
cyz
warriorofwire