circuitpython

Author	SHA1	Message	Date
Dan Halbert	1dc3957e72	LocalPeripheral is now Peripheral; more work on basic GATTS support; UART not working yet	2018-12-30 22:33:49 -05:00
Dan Halbert	ef39e72c7c	free event handlers on reset; fix typo in Broadcaster	2018-12-29 13:55:10 -05:00
Dan Halbert	de7cadb9b2	fix typos in internal_flash.c	2018-12-29 00:08:04 -05:00
Dan Halbert	145e110915	Merge remote-tracking branch 'adafruit/master' into bleio-rev	2018-12-29 00:00:39 -05:00
Dan Halbert	4d1f0ec07b	Add Broadcaster. Reset correctly on reload.	2018-12-28 23:34:23 -05:00
hathach	6b0d93cea3	correct i2c max len	2018-12-28 21:14:27 +07:00
hathach	a4ee80832a	fix #1422 correct i2c max xfer len (size in bits)	2018-12-28 16:30:11 +07:00
hathach	3ee766bc01	put received bytes to fifo when error	2018-12-28 01:05:30 +07:00
hathach	d092722ae8	fix #1407 keep receiving in case of error	2018-12-28 00:40:29 +07:00
Jerry Needell	55084b30ef	remome FRAMEBUF from nrf builds - use QSPI for particle ARGON	2018-12-27 09:38:35 -05:00
Dan Halbert	4167bf5b24	wip: advertising works, but not connection	2018-12-27 00:04:04 -05:00
Dan Halbert	f5b15c9b4d	Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev	2018-12-21 21:28:24 -05:00
Dan Halbert	0dfe2dbff0	return error status on more routines; minor simplification of freq setting	2018-12-21 12:30:54 -05:00
Dan Halbert	bce6d124af	Don't check for corrupt heap too early; Fix QSPI timing	2018-12-20 21:28:36 -05:00
Limor "Ladyada" Fried	a9f0b31a15	Update README.rst https://github.com/adafruit/circuitpython/issues/1410	2018-12-19 13:25:18 -05:00
hathach	6752266673	added pulsein using gpiote (gpio interrupt)	2018-12-18 22:05:17 +07:00
Dan Halbert	bfa66861ef	Merge remote-tracking branch 'adafruit/master' into bleio-rev	2018-12-13 16:33:15 -05:00
hathach	b37b2fa7e7	overwrite old data if fifo is full	2018-12-13 23:56:06 +07:00
hathach	e136222ae2	use rbuf for busio uart	2018-12-13 23:48:53 +07:00
Scott Shawcroft	69bb4ae670	Merge pull request #1397 from ShawnHymel/master Added board support for Arduino MKR Zero	2018-12-11 13:09:27 -08:00
Scott Shawcroft	29f9794dcf	Curly brace change to make it more consistent And to queue Travis	2018-12-11 11:57:52 -08:00
Scott Shawcroft	70939ad517	Merge pull request #1395 from jerryneedell/jerryn_cpython enable MICROPY_CPYTHON_COMPAT	2018-12-11 10:54:17 -08:00
Scott Shawcroft	8fc72e8978	Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.	2018-12-10 20:32:19 -08:00
Scott Shawcroft	8a981dc8e8	Merge remote-tracking branch 'adafruit/master' into sfe840	2018-12-10 20:13:36 -08:00
Nick Moore	1dc4c4757e	touchio.TouchIn sensing working on a single pin! adafruit/circuitpython#1048	2018-12-11 14:33:35 +11:00
Jerry Needell	a90343022a	enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds	2018-12-10 16:35:40 -05:00
Nick Moore	901db4797e	progress on NRF touchio.TouchIn #1048	2018-12-09 16:48:33 +11:00
ShawnHymel	f8ded46ad6	Merged field in pin table in README.	2018-12-08 17:42:42 -06:00
ShawnHymel	4c81d9a9ac	Added SD_CD pin definition	2018-12-08 17:40:46 -06:00
Scott Shawcroft	801d9a5abc	Fix running the USB task on nRF. It wasn't being run due to a rework done only on the atmel-samd port. The rework itself isn't needed now that the heap check triggers safe mode instead of throwing a Python exception. So, I've removed the rework.	2018-12-07 16:11:21 -08:00
Dan Halbert	a7a24096f4	bleio WIP: redo for more immutability; use sd_* routines for internal flash write	2018-12-07 16:52:47 -05:00
Scott Shawcroft	df84da5913	Stub out serial_write as well	2018-12-07 09:32:37 -08:00
Scott Shawcroft	808ca676b6	Fix unix	2018-12-06 17:12:30 -08:00
Scott Shawcroft	332ea8853f	Macro guard VDDH inclusion.	2018-12-06 16:38:14 -08:00
Scott Shawcroft	817766acdc	Use the stub for ESP8266 as well.	2018-12-06 15:47:16 -08:00
Scott Shawcroft	6ef8639971	Rework safe mode and have heap overwrite trigger it. This creates a common safe mode mechanic that ports can share. As a result, the nRF52 now has safe mode support as well. The common safe mode adds a 700ms delay at startup where a reset during that window will cause a reset into safe mode. This window is designated by a yellow status pixel and flashing the single led three times. A couple NeoPixel fixes are included for the nRF52 as well. Fixes #1034. Fixes #990. Fixes #615.	2018-12-06 14:24:20 -08:00
Dan Halbert	125901e4e2	Merge remote-tracking branch 'adafruit/master' into bleio-rev	2018-12-06 12:41:38 -05:00
Scott Shawcroft	7ad2e6ace3	Add stack validity check and raise an error when it happens. The backtrace cannot be given because it relies on the validity of the qstr data structures on the heap which may have been corrupted. In fact, it still can crash hard when the bytecode itself is overwritten. To fix, we'd need a way to skip gathering the backtrace completely. This also increases the default stack size on M4s so it can accomodate the stack needed by ASF4s nvm API.	2018-12-04 23:26:04 -08:00
Scott Shawcroft	f59c3bd726	Add flag comment	2018-12-04 18:22:23 -08:00
Scott Shawcroft	b25bf062fb	Add correct flash chip for Particle Mesh boards	2018-12-04 18:20:51 -08:00
Scott Shawcroft	3f5d917b39	Update submodules to merge commits	2018-12-04 18:20:51 -08:00
Scott Shawcroft	15c1fc873c	Add particle boards, fix cp32 and try to speed up atmel build	2018-12-04 18:20:48 -08:00
Dan Halbert	63cd9209f1	allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins	2018-12-04 15:05:39 -05:00
Nick Moore	452a622459	Set up structure for touchio adafruit/circuitpython#1048 (does nothing yet)	2018-12-04 17:12:02 +11:00
Dan Halbert	7f6da78be3	Merge pull request #1344 from bwshockley/master Add Mini SAM M4 board.	2018-12-03 17:37:23 -05:00
Dan Halbert	80db2cec99	UART changes: timeout in secs, write bytes, etc.	2018-12-03 12:04:32 -05:00
ShawnHymel	3d597aae92	Added MKR Zero board definition.	2018-12-02 18:07:19 -06:00
Scott Shawcroft	9aebe2f1ef	Merge branch 'master' into master	2018-11-30 20:49:55 -08:00
Scott Shawcroft	c55183f71a	Merge remote-tracking branch 'adafruit/master' into gc_rev_b	2018-11-30 15:09:15 -08:00
Scott Shawcroft	48928d4b25	Auto build and a couple pin fixes	2018-11-30 15:08:06 -08:00
Scott Shawcroft	3fa8796668	Merge remote-tracking branch 'adafruit/master' into mini_sam	2018-11-30 15:01:03 -08:00
Scott Shawcroft	77760090e2	Fix up spi flash define	2018-11-30 14:55:06 -08:00
Scott Shawcroft	95e0309263	Merge remote-tracking branch 'adafruit/master' into mini_sam	2018-11-30 14:40:01 -08:00
jimblom	09316b35d7	remove non-broken-out nrf pins. re-organize pins.c list.	2018-11-30 14:58:36 -07:00
Scott Shawcroft	6e15ab6385	Stop ignoring SD hex files and improve the error when its missing.	2018-11-30 13:26:12 -08:00
Scott Shawcroft	df18d22a93	Capture stderr as well and work on nRF build	2018-11-30 12:59:05 -08:00
jimblom	f67814fc97	Adding SparkFun nRF52840 Mini board support.	2018-11-30 13:57:22 -07:00
Scott Shawcroft	cf70dc4f1c	Fix BLE build	2018-11-30 11:53:33 -08:00
Scott Shawcroft	56345ff997	A few tweaks based on review feedback	2018-11-30 10:58:27 -08:00
Scott Shawcroft	9d07e95351	Add support for adding release info into adafruit/circuitpython-org This also changes the build script to python with better output.	2018-11-30 00:30:57 -08:00
Scott Shawcroft	c47c495aca	Merge pull request #1329 from notro/oserror_errno Support OSError subclasses and attributes	2018-11-27 22:35:54 -08:00
Scott Shawcroft	913b513929	Merge pull request #1357 from ElectronicCats/add-electroniccats-catwan-usbstick Added board Electronic Cats CatWAN USB Stick	2018-11-27 11:58:26 -08:00
Scott Shawcroft	60480ff4ed	Merge pull request #1351 from jepler/issue1307-ujson json: enable on nrf boards and "large flash" M4 samd boards	2018-11-27 11:29:29 -08:00
Scott Shawcroft	d446d328d8	Fix QSPI on Feather nRF52840 We were writing with quad page program including the address (0x38) which is unsupported by the GD25Q16C but it is supported by the flash on the DK. So, we use the single address, quad data command (0x32).	2018-11-27 00:13:24 -08:00
Dan Halbert	3164b16196	WIP: debug; add hash and __eq__ to UUID	2018-11-26 21:09:17 -05:00
sabas1080	1da2425612	Add Electronic Cats CatWAN USB Stick	2018-11-26 14:39:58 -06:00
Dan Halbert	6fb7590280	Merge remote-tracking branch 'adafruit/master' into bleio-rev	2018-11-26 10:16:29 -05:00
Scott Shawcroft	15eeac5d4b	A few fixes for nRF52840 feather QSPI and neopixel	2018-11-23 14:22:07 -08:00
Scott Shawcroft	324301e3bc	Update tinyusb to include control fixes.	2018-11-23 13:28:10 -08:00
Jeff Epler	52fd151c9c	ports/nrf: enable json module on nrf boards generally	2018-11-22 10:35:57 -06:00
Jeff Epler	78972cc879	ports/atmel-samd: enable json module on M4 boards with lots of flash	2018-11-22 10:35:44 -06:00
Dan Halbert	5fe746f643	Latest Feather nRF52840 pin revisions	2018-11-21 19:46:49 -05:00
Dan Halbert	1763ffe245	More UUID work; use mp_raise for exceptions	2018-11-20 23:04:58 -05:00
Benjamin Shockley	69eb2efced	Update devices.h	2018-11-20 13:21:43 -06:00
Scott Shawcroft	7d1a62e4ba	Update for Grand Central Rev B	2018-11-20 10:54:13 -08:00
Benjamin Shockley	c344d48840	Update devices.h	2018-11-20 12:44:12 -06:00
Dan Halbert	31cc71f7fb	WIP: bleio revisions	2018-11-20 09:36:45 -05:00
Benjamin Shockley	acb9bd7618	Cleanup for Mini SAM M4 Only Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.	2018-11-16 09:46:08 -06:00
Dan Halbert	11de8fdca7	merge 3.x swap of /lib and .frozen; update frozen libs	2018-11-15 15:00:23 -05:00
Scott Shawcroft	b67c53edfa	Factor out of external flash as well. Plus some cleanup. Fixes #1324	2018-11-14 18:30:47 -08:00
Scott Shawcroft	87ddd64481	Factor out fake partition	2018-11-14 17:59:11 -08:00
Scott Shawcroft	47212ee31e	start debug	2018-11-14 17:21:48 -08:00
Noralf Trønnes	704d0c606b	samd51: Support more uerrno errno values Use the default MICROPY_PY_UERRNO_LIST to give libraries access to all the errno values.	2018-11-13 22:07:05 +01:00
Dan Halbert	f190bb2c26	Merge pull request #1332 from tannewt/clear_trellis_neopixels Clear Trellis NeoPixels on board reset.	2018-11-13 15:03:25 -05:00
Scott Shawcroft	4ae4cc11e0	Clear Trellis NeoPixels on board reset. This makes it easier to change code in cases where the pixels may cause a brownout.	2018-11-13 11:27:18 -08:00
Scott Shawcroft	a3a690dc01	Add pragma to ensure neopixel_write is always -Os	2018-11-13 10:56:00 -08:00
Scott Shawcroft	ed9db80760	Switch SAMD51 back to -Os It messes up neopixel timing otherwise. Fixes #1326	2018-11-13 10:43:18 -08:00
Scott Shawcroft	355abc835e	Fix output overflow and make help translatable	2018-11-09 16:41:08 -08:00
Scott Shawcroft	43f7ca7985	Incorporate feedback: * Clean up board defines. * Add flush on eject and stay ejected. * Swith back to NONE protocol for CDC.	2018-11-09 11:33:56 -08:00
Scott Shawcroft	688f0e388b	Update MKR1300 board definition too	2018-11-09 00:49:02 -08:00
Scott Shawcroft	be6b49c712	Add back internal flash header and slim it down.	2018-11-09 00:27:18 -08:00
Scott Shawcroft	9d91111b1b	Move atmel-samd to tinyusb and support nRF flash. This started while adding USB MIDI support (and descriptor support is in this change.) When seeing that I'd have to implement the MIDI class logic twice, once for atmel-samd and once for nrf, I decided to refactor the USB stack so its shared across ports. This has led to a number of changes that remove items from the ports folder and move them into supervisor. Furthermore, we had external SPI flash support for nrf pending so I factored out the connection between the usb stack and the flash API as well. This PR also includes the QSPI support for nRF.	2018-11-08 17:25:30 -08:00
Dan Halbert	64d457dad9	bring bleio PR up to date	2018-11-07 14:12:22 -05:00
Scott Shawcroft	f24c225664	Merge pull request #1312 from dhalbert/adafruit_nrfx Use adafruit/nrfx fork of NordicSemiconductor/nrfx	2018-11-04 11:42:12 -08:00
Scott Shawcroft	6aca9762c9	Merge pull request #1313 from siddacious/master adding support for the CP32-M4	2018-11-04 11:26:14 -08:00
Dan Halbert	a15ed0b912	Fix Trellis M4 DotStar pin assignments.	2018-11-04 00:07:42 -04:00
ATMakersBill	bd4188a092	adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh	2018-11-03 14:42:27 -04:00
ATMakersBill	4f2f571536	Adding the serial_bytes_available() method to the 3.x branch	2018-11-03 14:01:30 -04:00
Dan Halbert	4dfba2f8ac	put .frozen before /lib in sys.path; update frozen libraries	2018-11-01 19:57:10 -04:00
Bryan Siepert	844b674a1e	adding support for the CP32-M4	2018-11-01 09:42:48 -07:00
Dan Halbert	e203ce9ce5	Use adafruit/nrfx fork of NordicSemiconductor/nrfx	2018-10-31 23:18:59 -04:00
Bryan Siepert	dc82fd556b	Updating devices.h to add new devices, fix a typo and address #1239	2018-10-31 01:54:09 -07:00
Dan Halbert	bd79c0c0de	Merge pull request #1295 from ElectronicCats/mkr1300 Add board MKR1300 by Arduino	2018-10-26 20:15:20 -04:00
Benjamin Shockley	aec39fd027	Updated to new D21G18 MCU Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4	2018-10-26 12:09:59 -05:00
Nick Moore	bbf8334166	Fix build without network code	2018-10-25 13:14:27 +11:00
Nick Moore	f6482699a0	Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native	2018-10-25 12:20:50 +11:00
Scott Shawcroft	dc9d338612	Merge pull request #1167 from notro/cpython_stdlib Support CPython standard library	2018-10-24 12:57:41 -07:00
Noralf Trønnes	d882ff6328	samd51: Set stack size to 8k This is necessary in order to run unittest. Heavy tests like those in the stdlib need 12-14k.	2018-10-24 19:33:01 +02:00
Noralf Trønnes	1b86e5fc83	samd51: Enable functionality to support CPython stdlib This enables various things in order to support the CPython standard library. MICROPY_PY_BUILTINS_NOTIMPLEMENTED: Support NotImplemented for easy conversion of stdlib. It doesn't do fallbacks though, only raises TypeError. MICROPY_PY_COLLECTIONS_ORDEREDDICT: collections.OrderedDict MICROPY_PY_FUNCTION_ATTRS: Support function.__name__ for use as key in the function attribute workaround. MICROPY_PY_IO: uio module: BytesIO, FileIO, StringIO, TextIOWrapper Also add 'io' alias. MICROPY_PY_REVERSE_SPECIAL_METHODS: Support the __r*__ special methods. MICROPY_PY_SYS_EXC_INFO: sys.exc_info() used by unittest when collecting exceptions. MICROPY_CPYTHON_COMPAT: Some of the things it adds: >>> object.__init__ <function> >>> object.__new__ <function> >>> object.__class__ <class 'type'> >>> object().__class__ <class 'object'> >>> object.__name__ 'object' >>> 'Hello'.encode() b'Hello' >>> b'Hello'.decode() 'Hello' Named tuple field names from string: namedtuple('Point', 'x y')	2018-10-24 19:33:01 +02:00
Noralf Trønnes	cec9a69a15	samd51: Make errno, os, and time module aliases Add alias for uerrno so the user doesn't have to know about the CircuitPython special names for the module. Make os and time weak modules (aliases) making it possible to add functionality to those modules written in python. Example: 'import os' will now look in the path for an os module and if not found it will import the builtin module. An os module written in python will import the builtin module through its name prefixed with an underscore (_os) following the C module naming practice in CPython. Also right align the macro values to increase readability making it easier to compare the values for samd21 and samd51. Even the longest macro from py/mpconfig.h will fit with this alignment.	2018-10-24 19:31:53 +02:00
Scott Shawcroft	554f82fe9b	Merge pull request #1286 from klardotsh/topic-nrf52840-mdk Add support for MakerDiary nRF52840 MDK board	2018-10-22 17:47:14 -07:00
sabas1080	f0d7073a12	Add Arduino MKR1300	2018-10-22 19:38:24 -05:00
arturo182	4bc24c4f60	bleio: Fix errors after rebase	2018-10-21 17:15:27 +02:00
arturo182	eceb21a017	bleio: Don't register the services until needed Because of the very specific way nRF requires service registration (characteristics can be added only to last added service), we would have to write the Python code in a specific way. With this patch the user has more freedom.	2018-10-21 16:00:04 +02:00
arturo182	19fab4af5a	bleio: Remove deep copy constructor for UUID	2018-10-21 15:59:50 +02:00
arturo182	b5e5805bb4	bleio: Remove redundant struct field	2018-10-21 15:59:46 +02:00
arturo182	c7b42d80b3	bleio: A bit of cleanup	2018-10-21 15:59:42 +02:00
arturo182	cf79316002	nrf: Fix ble uart using the new API	2018-10-21 15:59:36 +02:00
arturo182	d5a71a4b8a	nrf: Move bluetooth driver to the 'bluetooth' folder	2018-10-21 15:55:25 +02:00
arturo182	17f13ecc2c	nrf: Cleanup of the ble driver Moved the functions to classes that they belong to.	2018-10-21 15:54:13 +02:00
arturo182	77eeecbfd9	nrf: BLE driver cleanup	2018-10-21 15:52:36 +02:00
arturo182	6545aa99a9	nrf: Remove the ble drv specific characteristic struct	2018-10-21 15:51:04 +02:00
arturo182	98aa8c5923	nrf: Remove the ble drv specific service struct	2018-10-21 15:51:01 +02:00
arturo182	3df7dea2cc	nrf: Remove the ble drv specific advertisement data struct	2018-10-21 15:50:59 +02:00
arturo182	4b344812bf	nrf: Remove the ble drv specific address struct	2018-10-21 15:50:56 +02:00
arturo182	3bd65fbae5	nrf: Move the Peripheral class to bleio as Device This was the last class from ubluepy and so that module is now gone. The Device class offers both Peripheral and Central functionality. See the inline docs for more info.	2018-10-21 15:50:45 +02:00
arturo182	bda734223e	nrf: Move the Service class from ubluepy to the shared bleio module	2018-10-21 15:43:51 +02:00
arturo182	cc78249226	nrf: Move the Characteristic class from ubluepy to the shared bleio module	2018-10-21 15:43:48 +02:00
arturo182	61bf4a16a7	nrf: Remove unused ubluepy classes	2018-10-21 15:43:39 +02:00
arturo182	1c6bf9a150	bleio: Move the Scanner class to a shared module	2018-10-21 15:43:29 +02:00
arturo182	7390dc7dab	bleio: Move ScanEntry to shared module and add a new AdvertisementData class	2018-10-21 15:43:24 +02:00
arturo182	345334aaf1	bleio: Add a new Address class Use the new in the Adapter singleton.	2018-10-21 15:43:21 +02:00
arturo182	d5f942a971	bleio: Add a AddressType enum-like class	2018-10-21 15:43:17 +02:00
arturo182	20b8d5169d	nrf: Move the Descriptor class from ubluepy to the shared bleio module	2018-10-21 15:43:13 +02:00
arturo182	f4940c9aec	nrf: Move the UUID class from ubluepy to the shared bleio module Also added a UUIDType enum-like class for determining UUID type.	2018-10-21 15:43:08 +02:00
Josh Klar	aefabc5353	Update docs to reflect proper size of device	2018-10-20 03:29:20 -07:00
Josh Klar	4c75a60bd3	Declobber a DEFINE	2018-10-20 02:57:17 -07:00
Josh Klar	16ca9c8c7c	Makefile fixes and some docs	2018-10-20 02:43:13 -07:00
Josh Klar	3d7b96aeb1	Add board and pin defs for MakerDiary NRF52840 MDK	2018-10-20 02:43:12 -07:00
Benjamin Shockley	5d190a5615	Update mpconfigboard.h Corrected NVM size.	2018-10-19 21:18:19 -05:00
Benjamin Shockley	548e6893cd	Create pins.c	2018-10-19 21:16:21 -05:00
Benjamin Shockley	88fd5d7daa	Create mpconfigboard.mk	2018-10-19 21:15:50 -05:00
Benjamin Shockley	1593f4e3a8	Create mpconfigboard.h	2018-10-19 21:14:46 -05:00
Benjamin Shockley	6d974593c7	Create board.c	2018-10-19 20:52:23 -05:00
Scott Shawcroft	b436666e85	Merge pull request #1272 from sajattack/battery add pin def for BAT	2018-10-17 12:15:38 -07:00
Dan Halbert	298756eef8	Merge pull request #1280 from tannewt/precondition_dac Ramp values to and from a default value while active.	2018-10-17 15:00:11 -04:00
Scott Shawcroft	8161178415	Merge pull request #1275 from ElectronicCats/board-meowmeow Added board Meow Meow by Electronic Cats	2018-10-17 11:41:57 -07:00
Scott Shawcroft	4eb1fe18e5	Tweaks from feedback: * default_value is now quiescent_value * Use step = -step format for sign switch * Add note about analogout_reset being empty	2018-10-17 11:31:08 -07:00
Scott Shawcroft	c209165d43	Ramp values to and from a default value while active. This reduces the popping sound on initial playback of an audio sample. The M4 DAC has a pop on startup that cannot be prevented. It also does not allow readback so current values of the DAC are ignored. Fixes #1090	2018-10-16 16:23:29 -07:00
Paul Sajna	089e2cc099	remove BATTERY from itsybitsy	2018-10-16 14:55:21 -07:00
Scott Shawcroft	c69b67f453	Merge pull request #1277 from dhalbert/nrf-pulseout PulseOut working	2018-10-16 10:19:55 -07:00
Dan Halbert	b3c7746a7f	fix copyright notice	2018-10-16 11:09:37 -04:00
Dan Halbert	2262efc311	PulseOut working	2018-10-16 11:05:02 -04:00
Nick Moore	a15f3361aa	add mechanism for timer ticks in NICs	2018-10-16 23:09:25 +11:00
sabas1080	c103a05579	Add board Meow Meow by Electronic Cats https://github.com/ElectronicCats/MeowMeow	2018-10-15 19:17:04 -05:00
Paul Sajna	1447df3fa6	change BAT to BATTERY	2018-10-14 23:34:49 -07:00
Paul Sajna	f1028b5f96	add pin def for BAT	2018-10-13 15:53:22 -07:00
Dan Halbert	8b531f3fba	Merge pull request #1263 from tannewt/trellis_m4_revD Support rev D for the Trellis M4 Express	2018-10-10 23:34:59 -04:00
Nick Moore	aab28748bb	Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native	2018-10-11 14:19:10 +11:00
Nick Moore	8d75c3d339	Changed to only build wiznet for {feather\|metro}_m[04]_express	2018-10-11 13:42:26 +11:00
Scott Shawcroft	e5d2fae801	Merge pull request #1261 from jepler/esp8266-prebuilt-sdk esp8266/README: comment on the specific binary SDK used	2018-10-10 12:03:12 -07:00
Scott Shawcroft	b5e26130d7	Support rev D for the Trellis M4 Express	2018-10-10 11:21:35 -07:00
Dan Halbert	8d58093328	Merge pull request #1259 from dhalbert/nrf-pwmout Allow variable freq PWMOut; use multiple channels if same freq	2018-10-10 12:27:27 -04:00
Scott Shawcroft	df80ad8e6e	Merge pull request #1193 from ATMakersBill/master Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.	2018-10-09 23:58:43 -07:00
Dan Halbert	ca737e6f7c	Don't disable tempoarily in deinit().	2018-10-09 21:23:47 -04:00
Jeff Epler	012cc466a4	esp8266/README: comment on the specific binary SDK used	2018-10-09 20:17:38 -05:00
Dan Halbert	91a88cf568	Allow variable freq PWMOut; use multiple channels if same freq	2018-10-09 20:52:55 -04:00
ATMakersBill	9f94712ad1	replacing change to input() with separate method to check for USB Serial input	2018-10-09 18:37:52 -04:00
Scott Shawcroft	a647ab83df	Merge remote-tracking branch 'adafruit/master' into mixer	2018-10-09 13:31:17 -07:00
Nick Moore	a60700b1c5	Get DHCP working ...	2018-10-09 16:28:30 +11:00
Nick Moore	6e624b9c6a	Split wiznet.WIZNET5K off into its own file	2018-10-09 13:05:58 +11:00
Jerry Needell	fd0ea85549	add force_create to nrf filesystem_init()	2018-10-06 08:03:27 -04:00
Scott Shawcroft	2b0356c61f	Disable framebuf by default on express builds.	2018-10-05 15:19:09 -07:00
Scott Shawcroft	76008ce304	Introduce audioio.Mixer which can mix multiple audio samples to produce a single sample. Only works with 16 bit samples on the M4. Fixes #987	2018-10-05 15:12:23 -07:00
hathach	21ddb6b9b9	fix tinyusb cdc issue	2018-10-05 21:37:16 +07:00
Benjamin Shockley	091c5106ef	Cleanup Files	2018-10-04 21:26:28 -05:00
Benjamin Shockley	62d316bffb	W25Q16JV IQ and IM Indicate the differences between IQ and IM with the 2 MiB version of the W25Q chip.	2018-10-04 21:26:05 -05:00
Benjamin Shockley	2ef29c2cec	Changed FLASH DEVICE Changed the flash device to W25Q16JV_IM - the type actually used.	2018-10-04 21:14:07 -05:00
Benjamin Shockley	f6b9f101dc	Added W25Q16JV_IM Added new flash module: W25Q16JV_IM	2018-10-04 21:13:05 -05:00
Nick Moore	15b59bee1b	change initialization method + mod_network names	2018-10-04 22:31:47 +10:00
Nick Moore	f9bda0ff93	Makefile & mpconfigport for atmel-samd with wiznet	2018-10-04 22:02:25 +10:00
Dan Halbert	6049776b26	Merge branch 'master' into nrf52_uart_io	2018-10-03 13:31:48 -04:00
Scott Shawcroft	86ae707b08	Merge pull request #1223 from dhalbert/spi-baudrate nrf: remove error check for SPI baudrate too high; round to nearest baudrate	2018-10-03 10:11:44 -07:00
hathach	b8884ccc8b	Merge branch 'master' into nrf52_uart_io	2018-10-03 23:13:56 +07:00
Dan Halbert	d79b0a6b17	Merge pull request #1232 from platipo/master Fix 'advertisement' typo	2018-10-03 09:14:28 -04:00
Enrico Paganin	4b9099358f	Fix 'advertisement' typo	2018-10-03 09:56:30 +02:00
hathach	08cbb03bdd	implement common_hal_busio_uart_clear_rx_buffer	2018-10-03 11:39:01 +07:00
hathach	f543c8415d	"busio.UART not yet implemented -> not available	2018-10-03 11:30:31 +07:00
Dan Halbert	21d331c8cc	round SPI freq down; check max freq	2018-10-02 21:06:40 -04:00
Dan Halbert	036a1490e3	Merge pull request #1227 from tannewt/trellis_m4 Update Trellis M4 Express for Rev C	2018-10-02 20:33:27 -04:00
Scott Shawcroft	3c743f2664	Update Trellis M4 Express for Rev C	2018-10-02 11:56:09 -07:00
Dan Halbert	aa95526428	nrf: remove error check for SPI baudrate too high; round to nearest baudrate	2018-10-01 18:54:13 -04:00
Benjamin Shockley	1f3a3fe5a0	Merge remote-tracking branch 'upstream/master'	2018-10-01 12:28:42 -05:00
Benjamin Shockley	862d5a06fd	Create pins.c	2018-09-29 23:33:07 -05:00
Benjamin Shockley	8e52d922cc	Create mpconfigboard.mk	2018-09-29 23:26:15 -05:00
Benjamin Shockley	5ab4f09b2f	Create mpconfigboard.h	2018-09-29 23:24:32 -05:00
Benjamin Shockley	4acca8b90b	Update board.c	2018-09-29 23:17:24 -05:00
Benjamin Shockley	13364f90fe	Create board.c	2018-09-29 23:16:07 -05:00
Dan Halbert	48a3aafdd2	reset I2C and SPI on ctrl-D	2018-09-25 15:12:10 -04:00
hathach	76d6fb03f0	more clean up	2018-09-26 02:12:06 +07:00
hathach	eba80f7a99	update translate string	2018-09-26 02:10:44 +07:00
hathach	52328c88cd	remove space	2018-09-26 02:06:32 +07:00
hathach	74cc55b107	change error type to runtime	2018-09-25 17:31:53 +07:00
hathach	f724647a45	fix feather nrf52840 build error	2018-09-25 17:09:54 +07:00
hathach	dec5c50c45	clean up	2018-09-25 16:22:14 +07:00
hathach	2f0e0bdcaf	migrate serial from uart to uarte	2018-09-25 16:14:44 +07:00
hathach	9017c9d29a	clean up	2018-09-25 14:29:45 +07:00
hathach	d3e5ba83eb	update nrfx to 1.3.0	2018-09-25 13:00:57 +07:00
hathach	d714479924	clean up	2018-09-25 12:48:48 +07:00
hathach	01c1296197	nrf52 uart io rx work reliably	2018-09-25 12:37:31 +07:00
hathach	1782ceab35	uarte malloc if buffer is not in SRAM	2018-09-24 16:18:49 +07:00
hathach	4015023e01	clean up uart io	2018-09-24 16:12:05 +07:00
hathach	7bbd449f06	uarte rx work fine	2018-09-24 15:54:32 +07:00
hathach	fdd3e91753	changing to nrf uarte, tx works fine	2018-09-24 14:56:52 +07:00
hathach	7a1b4ccc9b	Merge branch 'master' into nrf52_uart_io	2018-09-24 12:50:48 +07:00
Scott Shawcroft	f2c960e89b	Merge pull request #1205 from hathach/nrf52_autoreload add autoreload for nrf52	2018-09-21 16:48:21 -04:00
hathach	e1fe7e71a1	add autoreload	2018-09-22 02:08:00 +07:00
Scott Shawcroft	a9d094ab74	Fix translations	2018-09-21 12:24:04 -04:00
Scott Shawcroft	e5274959f2	Merge remote-tracking branch 'adafruit/3.x' into merge_3x	2018-09-21 12:22:26 -04:00
Dan Halbert	2c15d12f2f	allow multiple I2C and SPI; improve nrfx_config.h	2018-09-20 20:45:30 -04:00
hathach	816ff05253	clean up	2018-09-21 03:53:35 +07:00
hathach	dddc437ea7	got rx working finally	2018-09-21 03:48:13 +07:00
hathach	fe1a297889	still have issue with initial uart rx	2018-09-21 01:27:52 +07:00
Dan Halbert	2309e60c0d	WIP; problem with staticly allocated IRQ handlers	2018-09-19 21:59:04 -04:00
hathach	9c25306877	uart rx got some issue with irq	2018-09-20 02:12:21 +07:00
Scott Shawcroft	3f380ded6b	Merge pull request #1197 from dhalbert/3.x-master 3.x master	2018-09-19 09:58:52 -07:00
hathach	c5593ec074	got uart tx work	2018-09-19 17:59:15 +07:00
hathach	1df3bcf392	add board.UART() function	2018-09-19 14:40:37 +07:00
Dan Halbert	8172a2ca9d	Merge pull request #1189 from arofarn/add-BATTERY-pin Add VOLTAGE_MONITOR pin to feather boards pins	2018-09-18 21:47:09 -04:00
Scott Shawcroft	655f223916	Clock the SAMD21 much faster so it can actually convert at its max sample rate of 350ksps. Also added an error check of sample rate. Fixes #1196	2018-09-18 15:29:46 -07:00
Dan Halbert	56b7f3ba64	fix translate omission; pca10059 fix in .travis.yml	2018-09-18 16:28:27 -04:00
Dan Halbert	bc510e714f	merge 3.0.2 to master	2018-09-18 15:38:12 -04:00
hathach	d8c8c5f005	remove CFG_HWUART_FOR_SERIAL	2018-09-18 20:26:50 +07:00
Dan Halbert	aaa61d06e3	add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen	2018-09-17 22:22:23 -04:00
Pierrick C	53853289eb	Move VOLTAGE_BATTERY line just under D9 line	2018-09-14 09:02:04 +02:00
ladyada	521a14e942	add mic in / out	2018-09-13 21:50:43 -04:00
ladyada	994c066b21	rev B (minus microphone)	2018-09-13 21:34:39 -04:00
ladyada	bec42671b1	missin' reset pin for the radio. tested works.	2018-09-13 21:30:13 -04:00
ladyada	28aabb4d5c	trellis m4 variant	2018-09-13 21:30:13 -04:00
Pierrick C	7e8816ad6f	Add VOLTAGE_MONITOR alias to pin D31/A7	2018-09-13 23:46:47 +02:00
Pierrick C	8eda4bb473	Add VOLTAGE_MONITOR alias for D9 pin to feather boards	2018-09-13 23:36:04 +02:00
Scott Shawcroft	2dd9407f21	Merge pull request #1186 from dhalbert/uart-enhancements UART enhancements	2018-09-12 16:23:28 -07:00
Dan Halbert	6a72084198	fix nrf builds; sphinx 1.8.0 crashing: use lower version	2018-09-12 18:37:03 -04:00
Scott Shawcroft	f21cf15c38	Add OnDiskBitmap which loads pixel data straight from disk. Also, renamed Sprite's palette to pixel_shader so it can be anything that produces colors based on values (including color values). Added a ColorConverter that converts RGB888 (found in bitmaps) to RGB565 for the display. Fixes #1182	2018-09-12 15:25:59 -07:00
Dan Halbert	6a046f55c4	UART fixes and enhancements; default board object fix	2018-09-12 17:19:43 -04:00
Dan Halbert	2bd7040fe0	usb_write() output_len was uint8_t instead of uint32_t	2018-09-12 17:16:52 -04:00
Paul Kierstead	02b3f62460	When UART timeout of zero is given, make read() return data already available	2018-09-12 13:25:49 -04:00
Benjamin Shockley	b923324e73	Added HW NEOPIXEL Definition Added definition for the built-in Neopixel. This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10	2018-09-12 07:59:07 -05:00
Dan Halbert	c3918bae57	PWMOut was not claming channels on shared TCCs	2018-09-11 19:46:47 -04:00
Benjamin Shockley	2138b04e45	Update to IS25LP016D Changed .supports_qspi_write to true.	2018-09-11 07:52:23 -05:00
Benjamin Shockley	c7cf38186d	Added IS25LP016D	2018-09-10 14:55:18 -05:00
Benjamin Shockley	08a2d962e3	Delete README.md	2018-09-10 17:01:31 +00:00
Benjamin Shockley	b2f5511de2	Initial Upload of Mini SAM M0 Initial Upload of Mini SAM M0	2018-09-10 17:01:00 +00:00
Benjamin Shockley	b03037e512	Create README.md	2018-09-10 16:55:55 +00:00
Dan Halbert	e335c74ac6	use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage	2018-09-09 15:01:28 -04:00
Dan Halbert	34bcb069cf	Merge pull request #1165 from tannewt/grandcentral Initial Grand Central definition	2018-09-07 15:00:13 -04:00
Scott Shawcroft	3ac03a31d8	Fix SDA/SCL	2018-09-07 10:39:18 -07:00
Scott Shawcroft	32c616b5dd	Initial Grand Central definition It has a ton of pins in a Mega form-factor This also includes a change to init the stack earlier. It fixes a crash that occurs if the flash doesn't start correctly and the original spot isn't reached.	2018-09-06 16:54:13 -07:00
Scott Shawcroft	c2e49dc87f	Merge remote-tracking branch 'adafruit/master' into hallowing	2018-09-06 14:54:55 -07:00
Scott Shawcroft	1683eb913d	Minor tweaks based on feedback	2018-09-06 14:49:49 -07:00
Dan Halbert	100603a60b	neopixel_write merge; alphabetize stuff in Makefile	2018-09-05 17:38:59 -04:00
Dan Halbert	4c3b4cacfa	Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming	2018-09-05 13:15:22 -04:00
Dan Halbert	a0872e8761	Merge pull request #1161 from hathach/nrf52_neopixel Nrf52 neopixel	2018-09-05 08:09:07 -04:00
hathach	ccd87a33b6	use nrf_pwm instead of direct registers	2018-09-05 13:18:36 +07:00
Dan Halbert	b5c03a7085	generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t	2018-09-04 16:43:21 -04:00
hathach	f4a98e909c	fix nrf52832 build 2	2018-09-04 23:25:08 +07:00
hathach	b9e8e3cd1f	fix nrf52832 build	2018-09-04 20:54:36 +07:00
hathach	1fe3ed87eb	run background job while waiting for neopixel write seqend	2018-09-04 19:24:45 +07:00
hathach	0d92c65829	correct disconnection check to only dtr	2018-09-04 18:36:08 +07:00
hathach	3ae24d9f9a	add neopixel_write implementation, work ok	2018-09-04 18:33:08 +07:00
hathach	e17253071e	adding neopixel write	2018-09-04 15:51:49 +07:00
Paul Kierstead	2d3f1a10bf	When UART timeout of zero is given, make read() return data already available	2018-09-01 17:07:30 +00:00
Dan Halbert	4382389e6f	fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards	2018-09-01 00:29:36 -04:00
Dan Halbert	9ea809bef7	add pin claiming to devices	2018-08-31 18:38:05 -04:00
Dan Halbert	585597a252	pin files rework; implement pin claiming; add more boards	2018-08-31 18:05:55 -04:00
Dan Halbert	0e8d146184	wip	2018-08-31 18:05:55 -04:00
Scott Shawcroft	121903b6ee	Tweaks based on feedback	2018-08-31 14:21:48 -07:00
Scott Shawcroft	6697544cdf	Introduce displayio to render graphics to displays. It's designed to minimize RAM footprint by using Sprites to represent objects on the screen. The object model also facilitates partial screen updating which reduces the bandwidth needed to display. This is all handled in C. Python simply manipulates the objects with the ability to synchronize to frame timing.	2018-08-31 12:31:52 -07:00
Dan Halbert	93100a7517	Merge pull request #1146 from hathach/nrf52_usb_serial_bug update tinyusb to fix #1007 serial issue	2018-08-28 15:39:34 -04:00
hathach	87811ec3a0	update readme board name feather_nrf52832	2018-08-28 16:15:20 +07:00
Scott Shawcroft	569a050e82	Merge pull request #1143 from notro/stat_epoch_fix Fix os.stat() epoch and use RTC for file timestamp	2018-08-26 22:22:45 -07:00
ladyada	ded38d30b6	rename pin.h to nrf_pin.h to avoid conflict with Pin.h	2018-08-26 20:37:12 -04:00
Noralf Trønnes	b61cf8d81f	samd: Use RTC to set file timestamp Use RTC to set file timestamp for file operations done on the board.	2018-08-25 20:43:09 +02:00
Jerry Needell	e8b94d0024	adjust SAMD51 neopixel_write timing	2018-08-24 07:01:50 -04:00
Dan Halbert	4cc33f8de6	Merge remote-tracking branch 'adafruit/master' into nrf_board_rename	2018-08-23 16:25:57 -04:00
Dan Halbert	728622f09d	Merge pull request #1139 from hathach/nrf52_usb_serial use unique DevicID for usb serial	2018-08-23 09:30:31 -04:00
hathach	4a8cd03de1	use unique DevicID for usb serial	2018-08-23 14:00:54 +07:00
hathach	fed1960424	remove s140 6.0.0 and s132 6.1.0 (not supported yet)	2018-08-23 00:27:39 +07:00
hathach	0c0ac06fc7	add SD 6.1.0 to download all	2018-08-22 23:09:09 +07:00
hathach	7961103ee6	update SD to v6.1.0	2018-08-22 21:51:30 +07:00
Dan Halbert	05ea9fd296	remove stray underscore	2018-08-22 10:26:52 -04:00
Dan Halbert	eaf4d19dbb	Merge remote-tracking branch 'adafruit/master' into nrf_board_rename Merge #1137	2018-08-22 10:24:10 -04:00
hathach	a516d1123f	fix typos	2018-08-22 19:42:41 +07:00
hathach	02b1b53153	Merge branch 'master' into nrf52_dfu_touch1200	2018-08-22 15:24:12 +07:00
hathach	fc955b1591	remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader	2018-08-22 15:22:17 +07:00
Dan Halbert	c503cf990b	forgot to change .travis.yml	2018-08-21 20:35:58 -04:00
Dan Halbert	85df32907f	rename nrf boards to feather_nrf52832 and feather_nrf52840_express	2018-08-21 18:45:37 -04:00
hathach	df4184e478	rename linker file to SD major version only	2018-08-21 16:02:57 +07:00
hathach	1c4accfa39	Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200	2018-08-21 15:17:03 +07:00
hathach	b7dd33b76e	add touch 1200 for dfu-flash	2018-08-21 15:15:44 +07:00
Scott Shawcroft	182a8d7120	Merge pull request #1131 from tannewt/hallowing3 Support Hallowing in 3.x	2018-08-20 18:26:07 -07:00
Scott Shawcroft	2b6b0ffcd2	Remove HID from hallowing so we have more room for other stuff.	2018-08-20 18:04:35 -07:00
Scott Shawcroft	44de3d49a8	Speed up zero neopixel pulses. SK6812 on 5v is pickier than WS2812 on 5v. Hopefully fixes #1083.	2018-08-20 17:04:46 -07:00
ladyada	aeeb40e02c	Change hallowing to shipping flash type W25Q64JV-IQ. tested!	2018-08-20 10:52:33 -07:00
Dan Halbert	1768057e87	add HalloWing	2018-08-20 10:52:24 -07:00
Noralf Trønnes	eefb6842a0	i2cslave: Fix missing translate() when raising exceptions The translate() changes where applied after travis had checked the i2cslave PR so this wasn't caught.	2018-08-18 16:00:06 +02:00
Scott Shawcroft	1a6f6ff8e4	Merge pull request #1122 from Jahor/patch-1 Fix PWM Support on port 1 of NRF52840	2018-08-17 16:54:03 -07:00
Scott Shawcroft	4a4d84ba42	Merge pull request #1064 from notro/i2cslave Add busio.I2CSlave	2018-08-17 16:51:45 -07:00
Egor Leonenko	18e9f74738	Fix PWM Support on NRF52840 Replace usage of pin number alone with port+pin combination in NRF port of PWMOut	2018-08-17 19:34:03 +12:00
Scott Shawcroft	e8cf6a9072	Update to merged peripheral change.	2018-08-16 18:05:53 -07:00
Scott Shawcroft	96534e598e	Fix unix coverage and update translations.	2018-08-16 17:41:53 -07:00
Scott Shawcroft	76e0373576	Fix nrf and unix	2018-08-16 17:41:38 -07:00
Scott Shawcroft	2cd166b573	Fix esp and samd	2018-08-16 17:41:35 -07:00
Scott Shawcroft	de5a9d72dc	Compress all translated strings with Huffman coding. This saves code space in builds which use link-time optimization. The optimization drops the untranslated strings and replaces them with a compressed_string_t struct. It can then be decompressed to a c string. Builds without LTO work as well but include both untranslated strings and compressed strings. This work could be expanded to include QSTRs and loaded strings if a compress method is added to C. Its tracked in #531.	2018-08-16 17:40:57 -07:00
Noralf Trønnes	11cbeb87ad	ports/atmel-samd: Implement i2cslave.I2CSlave This adds support for SAMD acting as a I2C slave in polled mode.	2018-08-16 17:20:49 +02:00
Noralf Trønnes	b6822b86ac	busio/I2C: Split out samd_i2c_get_sercom() It will be shared with I2CSlave.	2018-08-16 17:06:40 +02:00
ladyada	d8f2a61c39	Change hallowing to shipping flash type W25Q64JV-IQ. tested!	2018-08-14 13:04:33 -04:00
hathach	e1ccc07841	remove bootloader & dfu-bootloader target user should go to bootloader repo to upgrade bootloader	2018-08-14 20:19:28 +07:00
Dan Halbert	bbc034cd3d	Merge pull request #1104 from tannewt/more_strings Fixes and translate more strings.	2018-08-09 20:00:18 -04:00
Scott Shawcroft	24e53ad591	Rework escaping and fix ESP build.	2018-08-09 15:58:45 -07:00
Scott Shawcroft	86d2154d71	Change file mode back.	2018-08-09 09:14:14 -07:00
Scott Shawcroft	94c5ceab36	Initial SAMR board revision.	2018-08-09 05:36:46 -07:00
Jeff Epler	b0e33f6a11	atmel-samd: UART: allocate rx buffer in long-lived region This is not strictly needed in order for #1056 to be resolved, because the "make long-lived" machinery is unaware of this pointer. However, as UARTs are assumed to be long-lived, this change is beneficial because it moves the long-lived buffer into the upper memory area with other long-lived objects, instead of remaining in the low heap.	2018-08-08 19:21:57 -05:00
Dan Halbert	2e80f37709	Merge pull request #1096 from tannewt/tune_neopixel Retune neopixel timings on SAMD51. They were too slow.	2018-08-07 21:33:12 -04:00
Scott Shawcroft	b0dd645e27	Retune neopixel timings on SAMD51. They were too slow. Fixes #1083	2018-08-07 16:58:37 -07:00
Scott Shawcroft	933add6cd8	Support internationalisation.	2018-08-07 14:58:57 -07:00
Dan Halbert	498fec64e2	increase new dynamic stack size to a comfortable value for now	2018-08-03 22:35:20 -04:00
Dan Halbert	dfa2581ffd	Merge pull request #1057 from tannewt/flexible_heap Add basic memory allocation outside Python runtime	2018-08-02 18:43:06 -04:00
Scott Shawcroft	5704bc8c93	Share memory.c and a bit of polish.	2018-08-02 14:35:46 -07:00
Scott Shawcroft	64e5691fe7	Update to peripherals merge.	2018-08-02 13:59:12 -07:00
Scott Shawcroft	168aa394db	Move pin struct to the peripherals library. Its slimmed down by removing the qstr and bit packing TCC info. The trinket m0 build actually grows by 20 bytes. The arduino zero build shrinks by 188 bytes.	2018-08-02 13:59:05 -07:00
Scott Shawcroft	b50f46d4be	Rename to SRC_QSTR_PREPROCESSOR for clarity.	2018-08-02 11:07:22 -07:00
Scott Shawcroft	8cf03d2d00	Speed up QSTR creation by pre-filtering files before pre-processing.	2018-08-02 00:51:52 -07:00
hathach	0bc3432106	Merge branch 'master' into nrf52_sys_module	2018-08-01 11:53:12 +07:00
Dan Halbert	65bd07bb0b	Merge pull request #1074 from hathach/nrf52840_usb_hid Nrf52840 usb hid	2018-08-01 00:47:50 -04:00
hathach	592c190069	PR review clean up	2018-08-01 11:31:32 +07:00
hathach	8640d37149	try to address sys module, compile ok	2018-08-01 10:19:20 +07:00
hathach	200669216e	more clean up	2018-08-01 08:52:07 +07:00
hathach	bac233e99b	clean up	2018-08-01 08:47:41 +07:00
hathach	533d8dda96	fix samd usb hid typo	2018-08-01 08:40:04 +07:00
hathach	6ddd8583da	clean up	2018-08-01 08:20:20 +07:00
Scott Shawcroft	a88cdaca6a	Remove rogue execute bit. Must a common incorrect shortcut for me. :-)	2018-07-31 12:42:21 -07:00
hathach	1e524f1b98	Merge branch 'master' into nrf52840_usb_hid	2018-08-01 00:58:23 +07:00
hathach	85bd46a4e1	enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS	2018-07-31 23:09:39 +07:00
hathach	4bece22c92	add hid keyboard LED indicator stub	2018-07-31 23:02:15 +07:00
hathach	05139e2aee	all hid devices seems to be ok	2018-07-31 22:54:26 +07:00
hathach	2c85f42330	add usb hid syscontrol	2018-07-31 21:57:00 +07:00
hathach	ef58adacd3	usb hid consumer control works	2018-07-31 21:19:02 +07:00
hathach	fd661c1d57	improve usb hid	2018-07-31 21:06:24 +07:00
Scott Shawcroft	b334289669	Reenable LTO for debug.	2018-07-31 05:18:23 -07:00
Scott Shawcroft	12cf5e51c2	Allow for resizing the stack area.	2018-07-31 05:18:23 -07:00
Scott Shawcroft	777542c716	Add basic memory allocation outside Python runtime This allows for the heap to fill all space but the stack. It also allows us to designate space for memory outside the runtime for things such as USB descriptors, flash cache and main filename. Fixes #754	2018-07-31 05:18:03 -07:00
hathach	27b2a9fe59	add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO	2018-07-31 17:50:32 +07:00
hathach	d15caf0dbd	hid keyboard and mouse work well	2018-07-31 16:42:04 +07:00
hathach	221d54a595	workaround to use lib/utils/interrupt_char.c	2018-07-31 14:28:34 +07:00
hathach	ae783b0b1a	update tinyusb, set scsi sense key for unsupported commands	2018-07-31 13:54:58 +07:00
Scott Shawcroft	a6d94b6845	Merge pull request #1068 from dhalbert/micropython-25ae98f-merge Micropython `25ae98f` merge	2018-07-30 12:33:44 -07:00
Dan Halbert	fbe98ff9a9	Merge pull request #1071 from dhalbert/3.x-hallowing add HalloWing	2018-07-29 20:24:47 -04:00
Dan Halbert	680597547c	add HalloWing	2018-07-29 19:22:16 -04:00
Dan Halbert	bfbb5cde5a	put back test in qemu-arm build	2018-07-28 23:40:17 -04:00
Dan Halbert	2e260a0eab	Merge remote-tracking branch 'adafruit/master' into micropython-25ae98f-merge	2018-07-28 14:13:54 -04:00
Dan Halbert	f48b70050e	merge finished	2018-07-28 13:29:47 -04:00
hathach	368d59796f	adding usb_hid compiled with undefined ref	2018-07-27 17:36:41 +07:00
hathach	21339c4155	house keeping	2018-07-27 17:22:21 +07:00
hathach	e86f7d0b88	add usb msc callback description	2018-07-27 00:17:14 +07:00
hathach	5bdf40901f	update tusb lib	2018-07-26 17:16:41 +07:00
Dan Halbert	bc760dd341	WIP: complete manual inspection of all significant changes	2018-07-23 21:34:25 -04:00
hathach	bb28faf39c	arturo182 review	2018-07-17 23:57:49 +07:00
hathach	a0b9871ba9	use seperate interrupt_char.c for nrf move usb descriptors into usb.c	2018-07-17 21:52:20 +07:00
hathach	d4e84a9bd4	Merge branch 'master' into fix_nrf52840_serial	2018-07-17 21:27:16 +07:00
hathach	3525d65af3	should fix #1021 - update tinyusb for wanted char - move usb code into usb.c	2018-07-17 21:24:49 +07:00
Dan Halbert	2809b4f9dd	Merge branch 'master' into micropython-25ae98f-merge	2018-07-16 19:36:40 -04:00
Dan Halbert	a20ab40ed2	Merge 3.0.0 final bugfixes and changes to master	2018-07-16 09:01:46 -04:00
Dan Halbert	e2e01efa84	compiles and runs; hangs on import storage;storage.VfsFat.<tab>	2018-07-13 22:51:10 -04:00
Dan Halbert	bfe14ff824	Merge pull request #1014 from arturo182/nrf_shared_ble nrf: Split the ble module into a shared part and the port implementation	2018-07-13 10:23:37 -04:00
Dan Halbert	414267388d	Merge pull request #1023 from arturo182/nrf_pyocd nrf: Fix flashing with pyocd	2018-07-13 10:02:20 -04:00
arturo182	05c1384b67	nrf: Split the ble module into a shared part and the port implementation This allows other ports to implement these shared bindings.	2018-07-13 16:01:15 +02:00
arturo182	883ca21321	nrf: Fix flashing with pyocd	2018-07-13 15:22:46 +02:00
arturo182	9729fc3d31	nrf: Fix BLE on nRF52840 after adding the USB functionality	2018-07-13 14:55:02 +02:00
Dan Halbert	7c219600a2	WIP: after merge; before testing	2018-07-11 16:45:30 -04:00
hathach	873e20273e	fix travis build	2018-07-12 02:17:55 +07:00
hathach	f98c7f708e	merge review	2018-07-12 01:37:23 +07:00
hathach	10846d316b	Merge branch 'master' into nrf52840_usbboot	2018-07-11 21:35:44 +07:00
Dan Halbert	4962468fff	Merge pull request #1011 from arturo182/nrf_cleanup nrf: More cleanup and porting	2018-07-10 15:44:30 -04:00
hathach	a53b1c7cf1	code format	2018-07-10 22:49:51 +07:00
arturo182	eab00ff140	nrf: Remove even more unused files	2018-07-10 14:59:22 +02:00
arturo182	2c63fb2a94	nrf: Remove the random hal and module Thus getting rid of the whole old hal! The module is not needed because the common-hal nRF implementation uses HW RNG anyway.	2018-07-10 14:59:22 +02:00
arturo182	1163462635	nrf: Remove the old time hal and replace with nRFx	2018-07-10 14:59:10 +02:00
Scott Shawcroft	e875f4e52e	Merge pull request #1002 from arturo182/nrfx_gpio nrf: Rewrite the DigitalInOut hal using nRFx	2018-07-09 17:54:38 -07:00
Dan Halbert	8bb363f7c4	must set pull after setting direction with gpio_set_pin routines	2018-07-09 17:18:06 -04:00
hathach	0e819599e7	Merge branch 'master' into nrf52840_usbboot	2018-07-10 02:02:52 +07:00
hathach	7715d19efe	update bootloader hex	2018-07-10 01:20:37 +07:00
hathach	97a1ae911e	add family option for uf2	2018-07-10 01:18:14 +07:00
hathach	f199e87085	add ARRAY_SIZE which is missing when building with debug mode	2018-07-10 01:06:57 +07:00
hathach	c5089d7274	generate uf2 by default update tusb	2018-07-10 01:02:33 +07:00
Dan Halbert	64b9ee9c74	Merge pull request #985 from tannewt/heap_tweaks3 A few heap related tweaks	2018-07-08 23:21:38 -04:00
Scott Shawcroft	a45659c59a	Merge pull request #1000 from arturo182/nrfx_uart nrf: Rewrite the UART HAL using nRFx	2018-07-08 20:17:47 -07:00
Scott Shawcroft	133b99b6f2	Merge pull request #999 from arturo182/nrf_mphalport nrf: mphalport cleanup	2018-07-08 20:13:21 -07:00
Scott Shawcroft	fd5634e4aa	Merge pull request #992 from arturo182/nrf_i2c_fix nrf: Fix I2C transfers with data larger than HW allows	2018-07-08 20:12:09 -07:00
arturo182	388f554ff6	nrf: Rewrite the DigitalInOut hal using nRFx	2018-07-08 17:48:32 +02:00
arturo182	25ece8fb3d	nrf: Rewrite the UART HAL using nrfx	2018-07-08 16:42:04 +02:00
arturo182	c6a2a55bc9	nrf: Cleanup mpconfigboard files All the removed defines were used by legacy modules that are now removed.	2018-07-08 15:18:11 +02:00
arturo182	887486582e	nrf: Remove port-specific help It contains mentions to the pyb module which was removed. The ble-specific help will be re-added later when the API is stabilized.	2018-07-08 15:18:11 +02:00
arturo182	1ea633c484	nrf: mphalport cleanup	2018-07-08 14:39:30 +02:00
arturo182	da27253693	nrf: Fix I2C transfers with data larger than HW allows	2018-07-06 21:12:24 +02:00
arturo182	ac74edb4e4	nrf: Fix SPI transfers with data larger than HW allows	2018-07-06 21:10:25 +02:00
hathach	baf68a936e	remove hal_time files	2018-07-06 15:59:20 +07:00
hathach	3e319694aa	mp_hal_delay_ms() to call background task remove hal_time.c	2018-07-06 15:48:01 +07:00
hathach	948ddf8463	make SD default to s140 and s132 for nrf52840 and nrf52832 add CFG_HWUART_FOR_SERIAL for using jlink as REPL	2018-07-06 14:39:49 +07:00
hathach	6ef3a0b181	implement filesystem_writable_by_python()	2018-07-06 13:01:07 +07:00
Scott Shawcroft	54179a0189	Use .s in samd Makefile too.	2018-07-05 04:44:00 -07:00
hathach	0806c0a38b	update fatfs cached sector when running write10	2018-07-05 17:43:38 +07:00
hathach	4e5d9a029d	clean up	2018-07-05 17:26:07 +07:00
hathach	0365912e28	implement msc with internal_flash api Note: only work with SD is disabled.	2018-07-05 16:19:04 +07:00
hathach	3564e98181	implement msc flash, seems to work	2018-07-05 15:22:23 +07:00
hathach	1745e20391	replace jlink with native usb cdc for serial REPL	2018-07-05 11:30:12 +07:00
hathach	be2ff20e42	enable usb cdc interface not handle anything yet.	2018-07-04 17:15:49 +07:00
hathach	7fff7f5e70	add usb msc support for nrf52840	2018-07-04 16:40:53 +07:00
Scott Shawcroft	8fb976f0bd	Split out assembly source files.	2018-07-03 07:25:54 -07:00
mrmcwethy	d9723bb613	include RTC fix for SAMd51 in circuitpython build	2018-07-03 06:52:05 -07:00
Scott Shawcroft	074c5ea144	Merge pull request #977 from dhalbert/update_crickit_libs-2 update crickit-related libs	2018-07-03 12:04:05 -07:00
Dan Halbert	bf9981e8db	bring all frozen libraries up to date	2018-07-03 14:39:21 -04:00
Scott Shawcroft	dbc977485c	Support gathering register values on nrf.	2018-07-03 06:31:07 -07:00
Scott Shawcroft	ec78d3cefd	Mark pointers in cpu registers as in use. This prevents bugs where gc_collect is called from C code that did a recent allocation.	2018-07-03 05:45:50 -07:00
hathach	46c453cf0a	add tinyusb as submodule	2018-07-03 17:46:08 +07:00
hathach	b14b28067e	Merge branch 'master' into nrf52840_usbboot	2018-07-03 17:29:28 +07:00
Scott Shawcroft	bf00cde37d	Comment tweak after board change	2018-07-02 14:51:06 -07:00
Scott Shawcroft	b91202969a	Merge pull request #982 from arturo182/nrf_makefile nrf: Save some flash bytes by using extra compile flags	2018-07-02 14:33:47 -07:00
Scott Shawcroft	05a088b369	Merge pull request #972 from arturo182/nrf_i2c nrf: Rewrite the I2C common-hal using nrfx	2018-07-02 14:33:06 -07:00
arturo182	da491ec961	nrf: Save some flash bytes by using extra compile flags Both of these are used in the atsamd port as well.	2018-07-02 22:00:04 +02:00
Dan Halbert	7c9a0e2996	remove unnecessary extern in nrf/mphalport.c	2018-06-29 16:06:51 -04:00
Dan Halbert	7028a399c2	remove previously added esp8266/mphalport.{c,h}	2018-06-29 16:04:18 -04:00
Dan Halbert	2a0b857643	implement mp_hal_delay_us() to not need interrupts, and use it	2018-06-29 16:01:46 -04:00
mrmcwethy	df4469f92b	Test the BOARD parameter for nullness; display a error if nothing provided	2018-06-29 12:22:31 -07:00
mrmcwethy	d392f01f2c	include RTC fix for SAMd51 in circuitpython build	2018-06-29 05:45:38 -07:00
Dan Halbert	b4fd77bb7c	fix nrf and esp8266 builds for OneWire fix	2018-06-29 00:00:05 -04:00
Dan Halbert	52a11547cb	fix OneWire timing and DigitalInOut.switch_to_input()	2018-06-28 23:32:20 -04:00
Scott Shawcroft	429168d4ac	Merge pull request #970 from arturo182/nrf_softdev nrf: Remove unsupported softdevice defines	2018-06-28 14:01:19 -07:00
Scott Shawcroft	007155276a	Merge pull request #969 from arturo182/nrf_more_commonhal nrf: Rewrite more common-hal with nrfx and sync with atsamd port	2018-06-28 14:00:45 -07:00
Scott Shawcroft	039b4dc00a	Merge pull request #968 from arturo182/nrf_qstr nrf: Remove old qstr defines	2018-06-28 13:57:46 -07:00
Scott Shawcroft	ae82a93b56	Merge pull request #967 from arturo182/nrf_os nrf: Rewrite the os common-hal using nrfx	2018-06-28 13:55:34 -07:00
arturo182	178c089045	nrf: Rewrite the I2C common-hal using nrfx	2018-06-28 22:45:02 +02:00
arturo182	6e6a500801	nrf: Rewrite the os common-hal using nrfx	2018-06-27 21:01:07 +02:00
arturo182	af5cb9c492	nrf: Remove unneeded hal files	2018-06-27 21:00:34 +02:00
arturo182	b87bba8a28	nrf: Rewrite more common-hal with nrfx and sync with atsamd port	2018-06-27 20:55:29 +02:00
arturo182	1fa8fac5d7	nrf: Remove old qstr defines These were used by the microbit music module, which was removed.	2018-06-27 20:52:13 +02:00
arturo182	b9f02ca3c5	nrf: Remove unsupported softdevice defines	2018-06-27 20:48:57 +02:00
arturo182	2a12fcd18b	nrf: Rewrite the AnalogIn common-hal using nrfx	2018-06-27 20:41:30 +02:00
hathach	c4f11dfd32	flash target update bootloader setting to skip crc checksum	2018-06-27 15:22:44 +07:00
hathach	8fbe1d73e9	clean up makefile	2018-06-27 15:13:20 +07:00
hathach	4920cc47ca	move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it	2018-06-27 14:31:08 +07:00
hathach	bed7310fd7	update bin files	2018-06-27 14:13:18 +07:00
hathach	ecd3993d43	update pin map for feather52840	2018-06-27 14:06:15 +07:00
Dan Halbert	1f3de5174e	Freeze Adafruit_CircuitPython_Crickit into crickit builds	2018-06-26 19:49:55 -04:00
Scott Shawcroft	91427b0b23	Merge pull request #959 from arturo182/nrf_spim nrf: Rewrite the SPI common-hal using nrfx	2018-06-26 11:00:12 -07:00
Scott Shawcroft	d7d132d5a3	Merge pull request #960 from arturo182/nrf_stm_cleanup nrf: Remove leftovers from stm32 code copy	2018-06-26 10:52:04 -07:00
arturo182	16973d0559	nrf: Remove unused hal files Makes it easier to keep track of what's left to rewrite.	2018-06-26 00:13:41 +02:00
arturo182	2f1e678d60	nrf: Rewrite the SPI common-hal using nrfx Use SPIM2 on nRF52832 and SPIM3 on nRF52840. SPIM3 is able to go up to 32MHz!	2018-06-25 23:46:34 +02:00
arturo182	b14d13e318	nrf: Remove leftovers from stm32 code copy	2018-06-25 23:38:10 +02:00
hathach	8d065fe0e6	update reamde	2018-06-26 00:16:58 +07:00
hathach	54547683f9	add uf2, bootloader target	2018-06-25 23:31:14 +07:00
hathach	4722371be9	update bootloader hex with uf2	2018-06-25 23:27:00 +07:00
hathach	f5be5ed6ee	Merge branch 'master' into nrf52840_usbboot	2018-06-25 17:12:24 +07:00
arturo182	596a1d8843	nrf: Rename feather52 to feather52832 in readme files	2018-06-22 10:04:39 +02:00
Damien George	a2ac7e4fc9	stm32/boards: Add .ld and af.csv files for STM32F722. These files can also be used for F723, F732 and F733 MCUs.	2018-06-22 15:39:10 +10:00
Damien George	ec7982ec6d	stm32/mboot: Add support for erase/read/write of external SPI flash. This patch adds support to mboot for programming external SPI flash. It allows SPI flash to be programmed via a USB DFU utility in the same way that internal MCU flash is programmed.	2018-06-22 15:30:34 +10:00
Damien George	7f41f73f0f	stm32/qspi: Don't require data reads and writes to be a multiple of 4. Prior to this patch the QSPI driver assumed that the length of all data reads and writes was a multiple of 4. This patch allows any length. Reads are optimised for speed by using 32-bit transfers when possible, but writes always use a byte transfer because they only use a single data IO line and are relatively slow.	2018-06-22 15:07:01 +10:00
jerryneedell	de4cd1ee73	add pins D3/D4 to pins.c fixes #948	2018-06-20 22:26:59 -04:00
arturo182	25e71a56d4	nrf: Update the PCA10056 example to use new pin naming	2018-06-20 23:39:36 +02:00
arturo182	deec17e4fe	nrf: Remove really old examples These examples rely on machine and pyb modules, so they have to get. Leaving 3 BLE examples that also rely on those modules, but can be fixed to use CP's modules.	2018-06-20 23:38:18 +02:00
arturo182	9c08db55ff	nrf: Cleanup machine and microbit leftovers The music module was useful when this port had support for the microbit, now that it was removed, it's not so useful.	2018-06-20 23:30:34 +02:00
arturo182	c2d4d0a10b	nrf: Simplify pin generation and definition This commit cleans up the pin generation code, all the pins and their AF (only ADC, for now) are specified in nrf52_af.csv and board use their own csv file to specify which pins are available on that board and if they have any special names.	2018-06-20 23:26:32 +02:00
arturo182	ff918556cd	nrf: Simplify the board makefiles With the only difference between a SD and non-SD build is the linker file, there's no need to have two separate .mk per board files, just use a conditional.	2018-06-20 21:21:45 +02:00
arturo182	5509f394dc	nrf: Add a nrfx submodule and prepare for using the new drivers	2018-06-20 20:43:59 +02:00
arturo182	7cd34f2a94	nrf: Cleanup Makefile after nrf51 removal	2018-06-20 18:21:18 +02:00
arturo182	97f10241f9	nrf: Fix default board after feather52 rename	2018-06-20 18:21:18 +02:00
arturo182	b47a67d566	nrf: Remove machine, pyb and utime modules Micropython legacy, keeping it consistent with atsam port.	2018-06-20 18:21:18 +02:00
jerryneedell	80d16cb7df	add pins D3/D4 to pins.c fixes #948	2018-06-19 22:34:29 -04:00
Damien George	561ae9a91b	stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio. Fixes issue #3880.	2018-06-20 12:24:18 +10:00
Damien George	5962c210c5	stm32/mboot: Define constants for reset mode cycling and timeout. And fix timeout value so that it does actually finish with reset_mode=1.	2018-06-19 23:23:17 +10:00
hathach	61437106e7	update bootloader for feather nrf52840	2018-06-19 15:27:07 +07:00
hathach	6d2702ed98	Merge branch 'master' into nrf52840_usbboot	2018-06-19 14:50:17 +07:00
Scott Shawcroft	4e7eee3553	Merge pull request #946 from arturo182/nrf_sd6 nrf: Use the production version of s140 6.0.0	2018-06-18 16:29:41 -07:00
arturo182	feee808955	nrf: Use the production version of s140 6.0.0	2018-06-18 23:12:28 +02:00
Scott Shawcroft	05547b72ac	Switch to Feather52s full name to avoid confusion with the nrf52840 later. Fixes #940	2018-06-18 10:51:04 -07:00
Damien George	e49cd106b4	stm32/spi: Fix SPI driver so it can send/recv more than 65535 bytes. The DMA peripheral is limited to transferring 65535 elements at a time so in order to send more than that the SPI driver must split the transfers up. The user must be aware of this limit if they are relying on precise timing of the entire SPI transfer, because there might be a small delay between the split transfers. Fixes issue #3851, and thanks to @kwagyeman for the original fix.	2018-06-18 17:41:14 +10:00
Damien George	338af99a7f	stm32/can: Use MP_OBJ_ARRAY_TYPECODE_FLAG_RW where appropriate.	2018-06-18 13:42:05 +10:00
rolandvs	ca2b1d6b36	stm32/boards/NUCLEO_F091RC: Add Arduino-named pins and rename CPU pins. To match pin labels on other NUCLEO 64 boards.	2018-06-18 13:06:27 +10:00
rolandvs	0d3de68669	stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs.	2018-06-18 13:05:24 +10:00
Damien George	a5f5552a0a	tests/unix/extra_coverage: Don't test stream objs with NULL write fun. This behaviour of a NULL write C method on a stream that uses the write adaptor objects is no longer supported. It was only ever used by the coverage build for testing the fail path of mp_get_stream_raise().	2018-06-18 12:35:56 +10:00
Damien George	ceff433fcc	stm32/mboot: Adjust user-reset-mode timeout so it ends with mode=1. If the user button is held down indefinitely (eg unintenionally, or because the GPIO signal of the user button is connected to some external device) then it makes sense to end the reset mode cycle with the default mode of 1, which executes code as normal.	2018-06-18 12:23:27 +10:00
Dan Halbert	be5eb91df8	Merge pull request #938 from sommersoft/esp_busio_fix ESP8266: Fix pin locking during busio.SPI.configure	2018-06-16 11:49:20 -04:00
Scott Shawcroft	a5e03b76a6	Split out the peripherals library in preparation of sharing with MakeCode.	2018-06-15 16:16:21 -07:00
Limor "Ladyada" Fried	9fc0ec6af8	Merge pull request #934 from microbuilder/usbboot [WIP] nRF52840 USB Bootloader	2018-06-15 09:35:30 -07:00
Damien George	34b2f6b6fc	esp32/modules: Include umqtt library in frozen modules.	2018-06-15 16:39:49 +10:00
Damien George	d61d119c94	esp32: Update to latest ESP IDF.	2018-06-15 16:23:53 +10:00
sommersoft	23b6d33455	fixes #642 ; spi_init_gpio() is now bypassed for both construct and configure	2018-06-15 05:03:52 +00:00
Damien George	7be4a23c0c	stm32/i2cslave: Fix ordering of event callbacks in slave IRQ handler. It's possible (at least on F4 MCU's) to have RXNE and STOPF set at the same time during a call to the slave IRQ handler. In such cases RXNE should be handled before STOPF so that all bytes are processed before i2c_slave_process_rx_end() is called.	2018-06-15 14:15:31 +10:00
Damien George	bc5e8a2cb6	stm32/i2c: Fix num_acks calculation in i2c_write for F0 and F7 MCU's. Due to buffering of outgoing bytes on the I2C bus, detection of a NACK using the ISR_NACKF flag needs to account for the case where ISR_NACKF corresponds to the previous-to-previous byte.	2018-06-15 14:10:53 +10:00
Dan Halbert	fa814a32ce	Make Trinket M0 build fit; make RAMFS in vfs_fat_* tests be compliant with expected API	2018-06-14 21:02:12 -04:00
Damien George	37a7257aff	stm32/timer: Support TIM1 on F0 MCUs.	2018-06-15 10:50:08 +10:00
Dan Halbert	e724bc1c4e	Fix playing audio from SD card	2018-06-14 18:47:40 -04:00
Damien George	cc5a94044a	drivers/memory/spiflash: Rename functions to indicate they use cache. This patch renames the existing SPI flash API functions to reflect the fact that the go through the cache: mp_spiflash_flush -> mp_spiflash_cache_flush mp_spiflash_read -> mp_spiflash_cached_read mp_spiflash_write -> mp_spiflash_cached_write	2018-06-14 16:52:56 +10:00
Damien George	335d26b27d	stm32/boards/STM32L476DISC: Update SPI flash config for cache change.	2018-06-14 16:52:56 +10:00
hathach	35d38dbfed	update nrf52840 bootloader hex	2018-06-13 17:27:55 +07:00
Damien George	cf1509c911	esp32/fatfs_port: Implement get_fattime so FAT files have a timestamp. Fixes issue #3859.	2018-06-13 14:13:34 +10:00
Scott Shawcroft	618943d90a	Merge pull request #926 from nickzoic/circuitpython-nickzoic-716-pulseio-esp8266 Implement pulseio.PulseIn and PulseOut for ESP8266 #716	2018-06-12 18:33:16 -07:00
Scott Shawcroft	ee817a2fa8	Correct UART reads to return error on timeout. This causes read to correctly return None instead of b''. Fixes #874	2018-06-12 14:03:27 -07:00
Dan Halbert	4691b30c02	PDMIn: turn serializer on when starting DMA	2018-06-12 12:35:51 -04:00
Damien George	5042d98514	stm32/Makefile: Rebuild all qstrs when any board configuration changes.	2018-06-12 13:53:43 +10:00
Damien George	0501427907	esp32: Remove port-specific uhashlib implementation and use common one. Now that the common module has mbedtls support for both SHA1 and SHA256 it can now be used on this port.	2018-06-12 13:50:11 +10:00
Damien George	565f590586	ports: Enable IOBase on unix, stm32, esp8266 and esp32. It's a core feature, in particular required for user-streams with uasyncio.	2018-06-12 12:29:26 +10:00
Damien George	b2fa1b50ed	ports: Call gc_sweep_all() when doing a soft reset. This calls finalisers of things like files and sockets to cleanly close them.	2018-06-12 11:56:25 +10:00
Scott Shawcroft	73dadb0669	Update to the latest ASF4 which includes an I2C timeout extension while waiting for clock stretching. Fixes #778	2018-06-11 18:37:48 -07:00
Dan Halbert	068ffd04a6	Merge pull request #919 from adafruit/jerryneedell-patch-2 fix #918	2018-06-10 09:17:49 -04:00
Nick Moore	f72dcc64e6	Fixes #918 (PulseIn.get_paused) ...	2018-06-10 22:37:15 +10:00
Nick Moore	b25cbd340b	Merge commit '2129bbe160278f7cd2cece939f81900a41f8aa86' into circuitpython-nickzoic-716-pulseio-esp8266	2018-06-10 22:08:58 +10:00
Nick Moore	972b03850f	Merge branch 'master' into circuitpython-nickzoic-716-pulseio-esp8266	2018-06-10 22:01:35 +10:00
jerryneedell	8150150a24	return "false" for stub call See #918 for discussion	2018-06-10 07:11:44 -04:00
jerryneedell	2129bbe160	Update PulseIn.c	2018-06-10 07:08:56 -04:00
jerryneedell	5724fd795a	fix #918 Add stub for common_hal_pulseio_pulsein_get_paused to make ESP8266 build compatible with PR #901	2018-06-10 05:59:20 -04:00
Dan Halbert	b2d98edb4e	Merge pull request #901 from tannewt/pulseio_too_fast Prevent freezing USB during high frequency PulseIn.	2018-06-08 17:59:06 -04:00
Scott Shawcroft	8fb34a5846	Use bool not int.	2018-06-08 14:57:20 -07:00
Scott Shawcroft	8195df1b55	Stub out get_paused in nrf builds.	2018-06-08 14:01:54 -07:00
Scott Shawcroft	66b79723b6	Add code size analysis tool and shrink samd.clock a smidge.	2018-06-08 12:56:32 -07:00
Scott Shawcroft	769788d3c7	Turn off USB pin objects since they are always used for USB.	2018-06-08 12:56:32 -07:00
Scott Shawcroft	383bf9a59e	Wait for the DFLL to be stable.	2018-06-08 12:56:32 -07:00
Scott Shawcroft	07a8899c72	Support M4	2018-06-08 12:56:32 -07:00
Scott Shawcroft	2fbab8067a	Prevent freezing USB during high frequency PulseIn. We now track the last time the background task ran and bail on the PulseIn if it starves the background work. In practice, this happens after the numbers from pulsein are no longer accurate. This also adjusts interrupt priorities so most are the lowest level except for the tick and USB interrupts. Fixes #516 and #876	2018-06-08 12:56:32 -07:00
Dan Halbert	218930d18b	Check for PDMIn DMA getting stuck.	2018-06-08 08:23:52 -04:00
hathach	418e28c7dc	update nrf52840 bootloader hex and target	2018-06-08 16:10:49 +07:00
hathach	2b3436e87c	add feather nrf52 uart rts, cts support	2018-06-08 15:59:38 +07:00
hathach	c10899d13f	allow to flash feather52 and feather52840 with jlink add crc bypass magic to bootloader settting	2018-06-08 15:11:17 +07:00
Nick Moore	6af1fbacc9	Work on pulseio.PulseOut for #716 ESP8266 Switch to ets_delay_us but the PWM is still way too slow to be useful.	2018-06-08 16:41:42 +10:00
Nick Moore	011edf2472	Clean up interrupt handling for pulseio.PulseIn implementation for #716 ESP8266	2018-06-08 15:31:16 +10:00
Damien George	24c416cc66	stm32/mboot: Increase USB rx_buf and DFU buf sizes to full 2048 bytes. The DFU USB config descriptor returns 0x0800=2048 for the supported transfer size, and this applies to both TX (IN) and RX (OUT). So increase the rx_buf to support this size without having a buffer overflow on received data. With this patch mboot in USB DFU mode now works with dfu-util.	2018-06-08 15:29:52 +10:00
Nick Moore	c4cf1c5221	Initial pulseio.PulseOut implementation for #716 ESP8266	2018-06-08 15:28:05 +10:00
Nick Moore	7adc69baf9	Initial pulseio.PulseIn implmentation for #716 ESP8266	2018-06-08 15:27:59 +10:00
Glenn Moloney	039f196c56	esp32/modnetwork: Fix isconnected() when using static IP config. Currently <WLAN>.isconnected() always returns True if a static IP is set, regardless of the state of the connection. This patch introduces a new flag 'wifi_sta_connected' which is set in event_handler() when GOT_IP event is received and reset when DISCONNECTED event is received (unless re-connect is successful). isconnected() now simply returns the status of this flag (for STA_IF). The pre-existing flag misleadingly named 'wifi_sta_connected" is also renamed to 'wifi_sta_connect_requested'. Fixes issue #3837	2018-06-08 13:13:21 +10:00
Damien George	190c7dba89	stm32/mpconfigport.h: Enable DELATTR_SETATTR and BUILTINS_NOTIMPLEMENTED MICROPY_PY_DELATTR_SETATTR can now be enabled without a performance hit for classes that don't use this feature. MICROPY_PY_BUILTINS_NOTIMPLEMENTED is a minor addition that improves compatibility with CPython.	2018-06-08 12:55:18 +10:00
Damien George	93150a0d40	ports: Enable descriptors on stm32, esp8266, esp32 ports. They are now efficient (in runtime performance) and provide a useful feature that's hard to obtain without them enabled. See issue #3644 and PR #3826 for background.	2018-06-08 12:23:08 +10:00
Kattni Rembor	ba7e0e2f86	Add Adafruit to other M4 board name strings	2018-06-07 13:39:04 -04:00
Kattni Rembor	7b2875d54a	Add Adafruit to board name string	2018-06-07 13:33:13 -04:00
Kattni Rembor	0ab2a60dcd	Update ItsyBitsy board name to one word	2018-06-07 13:12:44 -04:00
hathach	c854e2dc17	Merge branch 'master' into usbboot	2018-06-07 13:51:21 +07:00
hathach	9bb4ded5fa	Merge remote-tracking branch 'upstream/master'	2018-06-07 13:50:04 +07:00
Damien George	fadd6bbe43	unix/moduos_vfs: Add missing uos functions from traditional uos module. Now that the coverage build has fully switched to the VFS sub-system these functions were no longer available, so add them to the uos_vfs module. Also, vfs_open is no longer needed, it's available as the built-in open.	2018-06-06 14:28:23 +10:00
Damien George	1d40f12e44	unix: Support MICROPY_VFS_POSIX and enable it in coverage build. The unix coverage build is now switched fully to the VFS implementation, ie the uos module is the uos_vfs module. For example, one can now sandbox uPy to their home directory via: $ ./micropython_coverage >>> import uos >>> uos.umount('/') # unmount existing root VFS >>> vfs = uos.VfsPosix('/home/user') # create new POSIX VFS >>> uos.mount(vfs, '/') # mount new POSIX VFS at root Some filesystem/OS features may no longer work with the coverage build due to this change, and these need to be gradually fixed. The standard unix port remains unchanged, it still uses the traditional uos module which directly accesses the underlying host filesystem.	2018-06-06 14:28:23 +10:00
Damien George	f35aae366c	extmod/vfs_fat: Rename FileIO/TextIO types to mp_type_vfs_fat_XXX. So they don't clash with other VFS implementations.	2018-06-06 14:28:23 +10:00
Dan Halbert	9ba6990228	Feather M0 Express build with Crickit libraries	2018-06-05 18:21:47 -04:00
Dan Halbert	74ced174ce	Merge pull request #898 from dhalbert/feather_m4_d4 add PA14 as D4 to Feather M4 Express	2018-06-05 11:41:31 -04:00
Dan Halbert	7e7e33e460	add PA14 as D4 to Feather M4 Exprses	2018-06-05 08:15:34 -04:00
Damien George	aace60a75e	esp8266/modules/ntptime.py: Remove print of newly-set time. It should be up to the user if they want to print the new time out or not. Fixes issue #3766.	2018-06-05 14:30:35 +10:00
Damien George	a90124a9e2	esp32: Add support for building with external SPI RAM. This patch adds support for building the firmware with external SPI RAM enabled. It is disabled by default because it adds overhead (due to silicon workarounds) and reduces performance (because it's slower to have bytecode and objects stored in external RAM). To enable it, either use "make CONFIG_SPIRAM_SUPPORT=1", or add this line to you custom makefile/GNUmakefile (before "include Makefile"): CONFIG_SPIRAM_SUPPORT = 1 When this option is enabled the MicroPython heap is automatically allocated in external SPI RAM. Thanks to Angus Gratton for help with the compiler and linker settings.	2018-06-05 13:57:59 +10:00
Angus Gratton	bc92206f89	esp32/Makefile: Extract common C & C++ flags for consistent compilation.	2018-06-05 13:05:12 +10:00
Scott Shawcroft	0c7c0821fc	Merge pull request #891 from godlygeek/low_flash_errno_fixes Human readable OSError messages for low flash devices	2018-06-04 17:22:57 -07:00
Damien George	df13ecde06	cc3200/mods: Include stream.h to get definition of mp_stream_p_t.	2018-06-04 16:58:45 +10:00
Damien George	309fe39dbb	stm32/modnetwork: Fix arg indexing in generic ifconfig method.	2018-06-03 21:50:49 +10:00
Matt Wozniski	d0e6bb269f	Use the system errno's on nrf	2018-06-02 12:55:07 -04:00
Scott Shawcroft	e580d22f4a	Use the external crystal on SAMD21 again. Also, re-enable calibration storage for CircuitPlayground Express. Tested with a 500hz PWMOut on Metro M0 with Saleae: * with crystal 500hz * with usb 500hz +- 0.1hz * without either 487hz += 0.1hz SAMD51 is skipped due to DFLL errata and the fact it defaults to a factory calibrated 48mhz that works fine for USB. Fixes #648	2018-06-01 18:01:42 -07:00
Matt Wozniski	22f4438787	Prune atmel-samd errno list Remove errnos that are only raised by modules that aren't linked into the atmel-samd port.	2018-06-01 19:04:14 -04:00
Matt Wozniski	e798b67ca2	Begin a custom list of errnos for atmel-samd The uerrno module was written to allow boards to customize the list of errnos they can raise. Start by copying the default list.	2018-06-01 19:04:04 -04:00
Scott Shawcroft	717199018b	Adapt for feedback and hack around pIRkey size constraint.	2018-06-01 15:08:52 -07:00
Dan Halbert	f386144428	redo state algorithm	2018-06-01 15:08:52 -07:00
Scott Shawcroft	9920f0a5de	atmel-samd: Make ticks more atomic. Always use current_tick when sub millisecond precision is required. Otherwise getting the ms/us to correspond is tricky.	2018-06-01 15:08:52 -07:00
Scott Shawcroft	d0fb6e7a2f	atmel-samd: Add rotary encoder support. Fixes #283	2018-06-01 15:08:48 -07:00
Scott Shawcroft	fd71e56891	atmel-samd: Re-org helper peripheral files into their own subdirectory. Ideally in the future they won't depend on ASF4 or MicroPython.	2018-06-01 15:07:31 -07:00
Dan Halbert	ae31c4ac18	Merge pull request #889 from tannewt/audioio_timers_in_use Turn off timer on AudioOut deinit.	2018-06-01 18:03:29 -04:00
Dan Halbert	ea95eb730a	Merge pull request #890 from tannewt/brownout3 Support brownout to safe mode. Fixes #870	2018-06-01 18:02:13 -04:00
Scott Shawcroft	f38ce1060c	Support brownout to safe mode. Fixes #870	2018-06-01 13:45:28 -07:00
Scott Shawcroft	bf1f0b3d11	Turn off timer on AudioOut deinit. Thanks to @sommersoft for spotting the error. Fixes #850	2018-06-01 13:32:45 -07:00
Noralf Trønnes	e158702a68	atmel-samd/samd51: Use crystal for RTC This uses the crystal to clock the RTC on boards which have a crystal. Disable clock generator 2 which was enabled in commit `8e2080411f` ("atmel-samd: Add rtc module support"). samd51 differs from samd21 when it comes to the RTC clock. samd51 doesn't have an explicit clock peripheral so no need for a clock generator. The same commit didn't even setup XOSC32K correctly, it missed EN1K and XTALEN. The RTC uses the 1k clock output, so enable it on the OSCULP32K even if it works without it.	2018-06-01 18:03:23 +02:00
Noralf Trønnes	ab7ddfddd5	atmel-samd/samd51: Refactor clock setup Refactor the convoluted asf4 clock setup into something more readable. enable_clock_generator() has 2 changes: - Set 'Output enabled' to match the current clock setup - Handle divisors above 511 Add an enable_clock_generator_sync() version which makes it possible to setup clocks without waiting for syncing. The bootup would hang without this. I have checked these registers: NVMCTRL->CTRLA = 0x00000004 Peripheral clocks (only non-zero shown): PCHCTRL[1]=0x00000045 PCHCTRL[10]=0x00000041 Generator clocks (only non-zero shown): GENCTRL[0] = 0x00010907 GENCTRL[1] = 0x00010906 -GENCTRL[2] = 0x00041104 +GENCTRL[2] = 0x00200904 GENCTRL[4] = 0x00010907 GENCTRL[5] = 0x00180906 DFLL clock: OSCCTRL->DFLLCTRLA = 0x00000082 OSCCTRL->DFLLCTRLB = 0x00000000 OSCCTRL->DFLLVAL = 0x00008082 OSCCTRL->DFLLMUL = 0x00000000 DPLL clocks: OSCCTRL->Dpll[0].DPLLCTRLA=0x00000002 OSCCTRL->Dpll[0].DPLLCTRLB=0x00000000 OSCCTRL->Dpll[0].DPLLRATIO=0x0000003b OSCCTRL->Dpll[1].DPLLCTRLA=0x00000080 OSCCTRL->Dpll[1].DPLLCTRLB=0x00000020 OSCCTRL->Dpll[1].DPLLRATIO=0x00000000 OSC32KCTRL clock: OSC32KCTRL->RTCCTRL = 0x00000000 OSC32KCTRL->XOSC32K = 0x00002082 OSC32KCTRL->CFDCTRL = 0x00000000 OSC32KCTRL->EVCTRL = 0x00000000 OSC32KCTRL->OSCULP32K = 0x00002300 Only gen2 changed which is due to samd51 having more bits in the simple division register so DIVSEL wasn't necessary, and it didn't have OE set.	2018-06-01 18:02:35 +02:00
Noralf Trønnes	5c6aea9fd8	atmel-samd/samd51: Implement samd.clock Fill out the dummy implementation.	2018-06-01 18:01:08 +02:00
Damien George	7d86ac6c01	stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP. The Wiznet5k series of chips support a MACRAW mode which allows the host to send and receive Ethernet frames directly. This can be hooked into the lwIP stack to provide a full "socket" implementation using this Wiznet Ethernet device. This patch adds support for this feature. To enable the feature one must add the following to mpconfigboard.mk, or mpconfigport.mk: MICROPY_PY_WIZNET5K = 5500 and the following to mpconfigboard.h, or mpconfigport.h: #define MICROPY_PY_LWIP (1) After wiring up the module (X5=CS, X4=RST), usage on a pyboard is: import time, network nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4) nic.active(1) while not nic.isconnected(): time.sleep_ms(50) # needed to poll the NIC print(nic.ifconfig()) Then use the socket module as usual. Compared to using the built-in TCP/IP stack on the Wiznet module, some performance is lost in MACRAW mode: with a lot of memory allocated to lwIP buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared with 1M/sec when using the TCP/IP stack on the Wiznet module.	2018-06-01 14:21:38 +10:00
Damien George	d9f1ecece2	stm32/modnetwork: Provide generic implementation of ifconfig method. All it needs is a lwIP netif to function.	2018-06-01 13:33:14 +10:00
Damien George	7437215ad7	stm32/modnetwork: Change base entry of NIC object from type to base. mod_network_nic_type_t doesn't need to be an actual uPy type, it just needs to be an object.	2018-06-01 13:31:28 +10:00
Damien George	6d87aa54d6	stm32/modnetwork: Don't take netif's down when network is deinited. It should be up to the NIC itself to decide if the network interface is removed upon soft reset. Some NICs can keep the interface up over a soft reset, which improves usability of the network.	2018-06-01 13:27:06 +10:00
Radomir Dopieralski	d02899f822	Add gamepad_singleto to root pointers for the nrf port	2018-05-30 23:11:23 +02:00
Radomir Dopieralski	b219ce6d37	Add gamepad_singleton to root pointers	2018-05-30 23:11:22 +02:00
Dan Halbert	eab8e43188	rev E feather M4 express; remove named AREF pins	2018-05-29 20:25:28 -04:00
Damien George	a1acbad27a	stm32/flash: Increase H7 flash size to full 2MiB.	2018-05-30 09:54:51 +10:00
rolandvs	958fa74521	stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI. And update the GPIO init for NUCLEO_H743ZI to consistently use the mphal functions.	2018-05-30 09:51:19 +10:00
rolandvs	50bc34d4a4	stm32/boards: Split combined alt-func labels and fix some other errors. Pins with multiple alt-funcs for the same peripheral (eg USART_CTS_NSS) need to be split into individual alt-funcs for make-pins.py to work correctly. This patch changes the following: - Split `..._CTS_NSS` into `..._CTS/..._NSS` - Split `..._RTS_DE` into `..._RTS/..._DE` - Split `JTDO_SWO` into `JTDO/TRACESWO` for consistency - Fixed `TRACECK` to `TRACECLK` for consistency	2018-05-29 21:37:49 +10:00
Damien George	98d1609358	stm32/README: Update to include STM32F0 in list of supported MCUs.	2018-05-28 22:04:08 +10:00
Damien George	e681372017	stm32/boards: Add NUCLEO_F091RC board configuration files.	2018-05-28 21:49:49 +10:00
Damien George	1163400039	stm32/boards: Add alt-func CSV list and linker script for STM32F091.	2018-05-28 21:49:49 +10:00
Damien George	ea7e747979	stm32: Add support for STM32F0 MCUs.	2018-05-28 21:49:49 +10:00
Damien George	4a7d157a5b	stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs. Sourced from STM32Cube_FW_F0_V1.9.0.	2018-05-28 21:49:49 +10:00
Damien George	6d83468a30	stm32: Allow a board to disable MICROPY_VFS_FAT.	2018-05-28 21:46:20 +10:00
Damien George	5c0685912f	stm32/timer: Make timer_get_source_freq more efficient by using regs. Use direct register access to get the APB clock divider. This reduces code size and makes the code more efficient.	2018-05-28 21:46:20 +10:00
Damien George	070937fe93	stm32: Add support for Cortex-M0 CPUs.	2018-05-28 21:46:20 +10:00
Damien George	f497723802	stm32: Allow to have no storage support if there are no block devices. If no block devices are defined by a board then storage support will be disabled. This means there is no filesystem provided by either the internal flash or external SPI flash. But the VFS system can still be enabled and filesystems provided on external devices like an SD card.	2018-05-28 21:45:46 +10:00
Damien George	aa4a7a8732	stm32/usb: Guard USB device code with #if for whether USB is enabled. With this change, all the USB source code can now be passed through the compiler even if the MCU does not have a USB peripheral.	2018-05-28 21:45:46 +10:00
Nick Moore	ef4c8e6e97	esp32: Silence ESP-IDF log messages when in raw REPL mode. This prevents clients such as ampy, mpy-utils, etc getting confused by extraneous data.	2018-05-28 20:15:08 +10:00
Dan Halbert	754c36bb37	Merge pull request #867 from dhalbert/fix_pirkey_apa102 3.0 pirkey build including appropriate frozen modules	2018-05-24 22:07:14 -04:00
Dan Halbert	ee896cdd41	restore I2C and UART. Don't do port.c resets and inits for modules that are not available.	2018-05-24 20:20:18 -04:00
Scott Shawcroft	42bf3a1306	Remove asf3 nvm code.	2018-05-24 13:14:40 -07:00
Dan Halbert	b9f36184f5	refine pirkey build	2018-05-24 13:28:03 -04:00
Damien George	15ddc20436	stm32: Add new component, the mboot bootloader. Mboot is a custom bootloader for STM32 MCUs. It can provide a USB DFU interface on either the FS or HS peripherals, as well as a custom I2C bootloader interface.	2018-05-24 23:21:19 +10:00

... 10 11 12 13 14 ...

1966 Commits