djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,466 Commits 21 Branches 274 Tags 785 MiB
dc2f729d19
Commit Graph

3308 Commits

Author SHA1 Message Date
Dan Halbert
23d6a3dc1f merge from upstream 2020-02-20 22:27:16 -05:00
Florent Gallaire
39ec5d0e51 Add NINA pins 2020-02-21 01:34:52 +01:00
Dan Halbert
634d246910 relicense nrf SPI.c to MIT 2020-02-20 16:00:21 -05:00
Scott Shawcroft
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011 
mimxrt10xx: Add Feather M7 1011 board config
 2020-02-20 10:15:57 -08:00
arturo182
feac87901a mimxrt10xx: Enable displayio 
Closes #2466
 2020-02-19 22:26:00 +01:00
arturo182
aa0cf38084 mimxrt10xx: Add Feather M7 1011 board config 2020-02-19 22:08:08 +01:00
Scott Shawcroft
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485 
Addition of RTS/CTS/RS485 capability
 2020-02-19 10:35:57 -08:00
Florent Gallaire
fba0b302ff Add Arduino Nano 33 IoT support 2020-02-19 08:56:06 +01:00
Florent Gallaire
63bcd52a5a Add Arduino Nano 33 IoT documentation 2020-02-19 08:50:27 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master 
New board: PyCubed + updates to SAM32 board
 2020-02-18 22:01:41 -05:00
Dave Marples
24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Dave Marples
f0e5341b0f Addition of support for imxt1010, 1050 and 1060 families 2020-02-18 23:16:40 +00:00
Dave Marples
d388899985 Addition of RS485 support 2020-02-18 23:16:40 +00:00
Dave Marples
84ad3d8393 Addition of RTS/CTS/RS485 UART functionality 2020-02-18 23:16:40 +00:00
Max Holliday
2b79d8ffe9 adding PWM to board.c for external WDT 2020-02-18 14:16:54 -08:00
Scott Shawcroft
2063867899
Merge pull request #2618 from mubes/alignment-warning 
Fix alignment warning
 2020-02-18 13:54:24 -08:00
Max Holliday
93760042fa no current need for NVM 2020-02-16 11:43:19 -08:00
Dave Marples
77ad9aff3c Formatting updates 2020-02-16 00:40:04 +00:00
Dave Marples
d13f04f953 Updated formatting 2020-02-14 23:02:02 +00:00
Dan Halbert
dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Scott Shawcroft
a0760206c6
Merge pull request #2597 from hierophect/stm32-espruino-wifi 
STM32: Espruino Wifi
 2020-02-13 11:17:59 -08:00
Dan Halbert
a65ca3ab19
Merge pull request #2617 from dhalbert/nrf-large-spi-transactions 
use properly-sized SPI transactions
 2020-02-12 23:29:29 -05:00
Dave Marples
4de2a1eb62 Fix alignment warning 2020-02-12 22:36:34 +00:00
Lucian Copeland
afc1c88046 remove bad define 2020-02-12 15:56:24 -05:00
Lucian Copeland
fd2982f5c9 revert cross-board flag strategy 2020-02-12 15:12:05 -05:00
Dan Halbert
e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Lucian Copeland
6d91ed2156 move defaults to avoid conflict 2020-02-12 14:38:27 -05:00
Lucian Copeland
b248486c3b cleanup flag changes 2020-02-12 14:32:50 -05:00
Lucian Copeland
b7bb85a4da Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi 2020-02-12 14:31:08 -05:00
Lucian Copeland
7831c475b9 change flag styling 2020-02-12 14:30:29 -05:00
Scott Shawcroft
35abc48a65
Merge pull request #2589 from hierophect/stm32-temperature-us 
STM32: Core temperature and voltage
 2020-02-12 10:55:00 -08:00
Scott Shawcroft
01507a91db
Merge pull request #2612 from mubes/loadable-binary 
Add directly loadable binary target for imxrt family
 2020-02-12 10:41:59 -08:00
hierophect
4bc093675c
Merge branch 'master' into stm32-temperature-us 2020-02-12 12:13:56 -05:00
Dave Marples
d0870ce484 Update main .bin output file to be bootable artefact 2020-02-12 09:03:11 +00:00
Dan Halbert
2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Dave Marples
f3e4fbd7ba Add directly loadable binary target 2020-02-11 23:01:08 +00:00
Scott Shawcroft
8364c60eb2
Merge pull request #2570 from hierophect/stm32-f407-disco 
STM32: Add STM32F4Discovery support
 2020-02-10 17:19:00 -08:00
Lucian Copeland
c4436910c3 create F407 specific files 2020-02-10 12:44:23 -05:00
Max Holliday
80ba4c8661
Merge pull request #2 from adafruit/master 
merging from upstream
 2020-02-10 09:41:16 -08:00
Lucian Copeland
3f700e7e68 fix missing parameter 2020-02-10 12:16:00 -05:00
Lucian Copeland
b4c60c3355 Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi 2020-02-10 11:52:32 -05:00
Lucian Copeland
baf8d9ef5f Merge remote-tracking branch 'upstream/master' into stm32-temperature-us 2020-02-10 11:45:49 -05:00
Drew Fustini
3bf4b42e2e change OH20 badge pin defs to use SWn for buttons 
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
 2020-02-10 00:49:13 +01:00
Drew Fustini
0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
Max Holliday
b91c4e66cb adding Adafruit_CircuitPython_Register to frozen + updating SAM32 2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e adding new board - PyCubed 
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
 2020-02-08 15:33:25 -08:00
hierophect
b93d6e861b
Merge pull request #2596 from hierophect/stm32-espruino-pico 
STM32: Espruino Pico
 2020-02-07 14:14:49 -05:00
Scott Shawcroft
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement 
Monotonic ns improvement; time.sleep rounds to nearest msec
 2020-02-07 11:03:37 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master 
update rotation so 0 is the default, for much faster ondiskbitmaps
 2020-02-07 12:59:30 -05:00
Dan Halbert
b245f9ca5b
Merge pull request #2591 from neubauek/master 
Added CircuitBrains Basic and Deluxe Boards
 2020-02-07 12:47:20 -05:00
Dan Halbert
005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert
857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Lucian Copeland
41b5f73785 revert mixed up linkers 2020-02-06 18:47:06 -05:00
Lady Ada
789e311b63 update rotation so 0 is the default, for much faster ondiskbitmaps 2020-02-06 16:28:02 -05:00
neubauek
d93d491a61 Cleaned up CircuitBrains Basic and Deluxe board definitions 2020-02-06 14:47:22 -06:00
Lucian Copeland
848577e830 Update PID 2020-02-06 12:55:36 -05:00
Lucian Copeland
aee26b1c79 Add proper PID 2020-02-06 12:25:17 -05:00
Lucian Copeland
4122f85888 Create board definitions, add to board list 2020-02-06 12:19:19 -05:00
Lucian Copeland
383854ac50 Add espruino pico to board list 2020-02-06 11:25:07 -05:00
Lucian Copeland
08cf152aa8 Document flashing process 2020-02-06 11:11:51 -05:00
Lucian Copeland
698ad745f6 Fix oscillator issue, add button and LED pins 2020-02-06 10:49:03 -05:00
Dan Halbert
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error 
Add another error message to BLE
 2020-02-05 23:39:17 -05:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
Scott Shawcroft
72a1bdab30
Add another error message for extended advertisements at the same 
time as scan response. The SD can't do it.
 2020-02-05 15:56:17 -08:00
Lucian Copeland
cdd1622350 Fix oscillator oversight in clocks.c 2020-02-05 18:12:48 -05:00
Lucian Copeland
e28d244a0d Add espruino pico pinout 2020-02-05 18:03:54 -05:00
neubauek
f3188669e4 Added CircuitBrains Basic and Deluxe Boards 2020-02-05 14:52:47 -06:00
Lucian Copeland
788464a594 board uses VBUS 2020-02-05 15:45:27 -05:00
Lucian Copeland
cedf6489f7 Add voltage ADC, standardize mphalport 2020-02-05 12:39:12 -05:00
Dan Halbert
b6da2fa173 nrf: fix i2c frequency setting 2020-02-05 11:25:31 -05:00
Lucian Copeland
4ba050d46d Add ADC for temp sensor 2020-02-04 16:26:24 -05:00
Scott Shawcroft
65045eb3bc
Merge pull request #2568 from hierophect/stm32-loader-linkers 
STM32: UF2 build option for STM32F405
 2020-02-04 12:21:45 -08:00
Lucian Copeland
6f73126756 add correct PID 2020-02-04 10:46:44 -05:00
Lucian Copeland
c1fded5062 Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-02-04 10:40:19 -05:00
Lucian Copeland
3ce6fc89a4 Implement new linker for external flash only 2020-02-04 10:38:45 -05:00
Dan Halbert
a4ebd2f7c1 allow tuple or list for Palette color 2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Lady Ada
5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling
64cafe82bc Adjust OHS2020 madctl for default rotation 
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:14:10 -08:00
Michael Welling
6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:39 -08:00
Michael Welling
33dcdd7c03 Updates to enable working SPI TFT 
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:03 -08:00
Michael Welling
d99c2ffe4f QSPI flash fixes 
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:11:12 -08:00
Lady Ada
dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Lucian Copeland
fa11912b9b New configuration values 2020-01-31 17:28:42 -05:00
Lucian Copeland
61944ef08e Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-01-31 16:38:17 -05:00
Dan Halbert
8258cb851e
Merge pull request #2569 from dhalbert/nrf-increase-connections 
increase max BLE connections from 2 to 5
 2020-01-31 15:59:27 -05:00
Dan Halbert
4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Lucian Copeland
cabc3aa90e Merge branch 'stm32-loader-linkers' of https://github.com/hierophect/circuitpython into stm32-loader-linkers 2020-01-31 14:36:03 -05:00
Lucian Copeland
41aefc819b Fix pyboard 2020-01-31 14:35:54 -05:00
Lucian Copeland
19553b8f7c WIP 2020-01-31 14:33:10 -05:00
Lucian Copeland
c1cf80180d Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-01-31 14:10:21 -05:00
Lucian Copeland
ab031bc25f Create basic board profile 2020-01-31 14:04:54 -05:00
hierophect
f38e12f0ab
Update ports/stm32f4/boards/STM32F405_boot.ld 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-01-31 13:56:08 -05:00
Lucian Copeland
a10e5d1da2 text fixes 2020-01-31 13:17:43 -05:00
Lucian Copeland
7085d91278 dangling edit 2020-01-31 13:13:51 -05:00
Lucian Copeland
b4dcecb266 Add build option for UF2 flash offset 2020-01-31 13:12:58 -05:00
Lucian Copeland
d8016bd52b Merge branch 'master' into stm32-loader-linkers 2020-01-31 12:21:46 -05:00
Dan Halbert
3b95d7c16a add gamepad to specialty cpx builds; update frozen libs 2020-01-30 21:00:47 -05:00
Dan Halbert
b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Scott Shawcroft
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf 2020-01-30 10:59:21 -08:00
Scott Shawcroft
298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes 
nrf: track vm_used_ble better
 2020-01-30 10:33:19 -08:00
Dan Halbert
87f73e2729 track vm_used_ble better 2020-01-30 09:52:06 -05:00
Scott Shawcroft
5d24ade5c9
Tweak error messages to reduce code size. 2020-01-29 17:32:07 -08:00
Lucian Copeland
1a25d3ca83 fix merge issue 2020-01-29 18:46:14 -05:00
hierophect
898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland
100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Lucian Copeland
b9bed98538 Merge stm32-meowbit 2020-01-29 16:05:19 -05:00
Lucian Copeland
8a9c3097e3 Add port-specific requested changes 2020-01-29 16:00:38 -05:00
Lucian Copeland
947c2243bd add feather bootloader settings, cleanup 2020-01-29 15:30:35 -05:00
Lucian Copeland
3c86005546 Implement requested changes 2020-01-28 17:11:25 -05:00
Lucian Copeland
ab9483b7fb Add internal display definitions, fails at startup 2020-01-28 16:00:34 -05:00
Wojtek Siudzinski
df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Scott Shawcroft
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma 
samd: When possible, use one DMA channel for stereo AudioOut
 2020-01-27 14:15:26 -08:00
Scott Shawcroft
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev 
Refine iMX RT memory layout and add three boards
 2020-01-27 14:11:08 -08:00
Jeff Epler
c8f969feb5 samd: audio-dma: avoid memory allocations 
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations.  This was
enough to cause MemoryErrors with regularity.

By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
 2020-01-27 08:49:41 -06:00
Lady Ada
f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Jeff Epler
cb6193bbc7 samd: When possible, use one DMA channel for stereo AudioOut 
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time.  This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half.  (the number of bytes transferred
remains the same, though)

In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values.  However, this is the
case that matters for stereo mp3 playback on PyGamer.

Testing performed: Listened to some tracks with good stereo separation.
 2020-01-26 15:36:24 -06:00
Lucian Copeland
b5b94b72c1 Return to bootloader options 2020-01-24 14:47:13 -05:00
Lucian Copeland
70932cab42 Simplify the flash-display conflict fix 2020-01-24 14:33:28 -05:00
Lucian Copeland
2afca4e942 Fix flash-display conflict error 2020-01-24 14:25:36 -05:00
Dan Halbert
6f13979c9b pygamer and pybadge boards were not resetting neopixels 2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Lucian Copeland
d8bc57c1dc Flash and display control 2020-01-23 17:17:02 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6 2020-01-23 12:32:19 -05:00
ndgarage
4675783545 change-name-to-ndgarage_ndbit6 2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc init nfc copy 2020-01-22 20:30:33 -06:00
Lucian Copeland
e9f9cee4d6 Invert duty cycle intensity 2020-01-22 18:47:41 -05:00
Lucian Copeland
36792926d2 Revert dangling pointer issue in PWMOut 2020-01-22 14:41:37 -05:00
Lucian Copeland
b326ee0a3d fix microcontroller pin ommission 2020-01-22 12:12:27 -05:00
Scott Shawcroft
085242bf5c
Use new USB PIDs that aren't used yet. 2020-01-21 18:45:00 -08:00
Scott Shawcroft
87344ff53a
Disable the DCache when USB is initialized. There are still issues enabling it. 2020-01-21 18:32:19 -08:00
Dan Halbert
4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8 Merge remote-tracking branch 'origin/master' into capablerobot-usbhub 2020-01-20 13:11:57 -05:00
Scott Shawcroft
1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Scott Shawcroft
9d5742ebd1
Fix start on power up by providing Reset_Handler ourselves. 
On power up the FlexRAM banks are in an unknown config so we can't
rely on the stack until after we configure FlexRAM.
 2020-01-18 11:54:01 -08:00
Scott Shawcroft
9f4ea2122a
teensy fixes 2020-01-17 18:35:09 -08:00
Scott Shawcroft
7d8dac9211
Refine iMX RT memory layout and add three boards 
Introduces a way to place CircuitPython code and data into
tightly coupled memory (TCM) which is accessible by the CPU in a
single cycle. It also frees up room in the corresponding cache for
intermittent data. Loading from external flash is slow!

The data cache is also now enabled.

Adds support for the iMX RT 1021 chip. Adds three new boards:
* iMX RT 1020 EVK
* iMX RT 1060 EVK
* Teensy 4.0

Related to #2492, #2472 and #2477. Fixes #2475.
 2020-01-17 17:36:08 -08:00
Hierophect
3f43155b63 Meowbit bus conflict WIP 2020-01-17 13:31:12 -05:00
arturo182
69785cccfe
mimxrt1011: Fix pin definition 2020-01-17 14:45:29 +01:00
Michael Welling
cc77e86408 Update the VID and USB company string 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 15:43:49 -08:00
Michael Welling
cc03d68984 Fix backlight pin registration 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 14:53:07 -08:00
Michael Welling
86d454adf3 Initial board support for OHS2020 Badge 
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 13:46:56 -08:00
Scott Shawcroft
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm 
nrf: Add bonding to BLE pairing support
 2020-01-15 16:11:09 -08:00
Dan Halbert
765a54afb5
Merge pull request #2525 from aramcon-badge/badge_2019_upstream 
Add board definition files for AramCon Badge 2019
 2020-01-15 18:29:36 -05:00
Benny Meisels
4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed 
CircuitPython support for the Open Book
 2020-01-15 17:21:19 -05:00
Dan Halbert
85dc4089b9 address review comments 2020-01-14 17:23:16 -05:00
dalegrover
d6e657b593 Initial commit. 2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247 add support for the Open Book 2020-01-14 16:34:46 -05:00
Hierophect
1070f2c853 Merge remote-tracking branch 'upstream/master' into stm32-meowbit 2020-01-14 16:11:59 -05:00
Hierophect
05093f7f54 Fix VTOR relocate, add bootloader makefile handling 2020-01-14 15:50:00 -05:00
hierophect
7775513a5b
Merge pull request #2463 from hierophect/stm32-i2c-rework 
STM32: I2C fix & general busio cleanup
 2020-01-14 15:06:31 -05:00
Scott Shawcroft
b5df5ce1ce
Merge pull request #2507 from kamtom480/circuitpython-mkspk 
Add mkspk source files
 2020-01-14 12:05:36 -08:00
Hierophect
5aae8df5d7 style changes, fix i2c typo 2020-01-14 13:30:16 -05:00
Hierophect
c0dacba80f remove comment confusing py tools 2020-01-14 13:06:10 -05:00
scs217
50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217
18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217
c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Dan Halbert
0367ba7495 fix some typos and leftovers 2020-01-13 18:29:34 -05:00
Dan Halbert
2a75196aa3 merge from adafruit/circuitpython 2020-01-13 18:15:32 -05:00
Dan Halbert
4ad004f24e put bonding to-do flags into Connection objects instead of using a heap-allocated queue 2020-01-13 17:52:32 -05:00
Hierophect
de2379bc30 minor WIP debug edits 2020-01-13 17:24:52 -05:00
Scott Shawcroft
2eb26a6d0b
Merge pull request #2457 from hierophect/stm32-cpython-compat 
STM32: Cpython compatibility flag 2
 2020-01-13 13:47:55 -08:00
Kamil Tomaszewski
402f6f66bd Add mkspk source files 2020-01-13 07:53:24 +01:00
Dan Halbert
9e7f8743c2 fix CCCD bonding store; avoid excessive bonding writes 2020-01-12 23:32:51 -05:00
Dan Halbert
346ce3b73b wip: HID bonding works! 2020-01-10 23:55:45 -05:00
Scott Shawcroft
6ea1785457
Merge pull request #2501 from kamtom480/timerhook 
Fix board_timerhook
 2020-01-10 11:57:54 -08:00
Scott Shawcroft
6ea8d8a6c2
Merge pull request #2498 from dhalbert/optional-i2c-pullup-checking 
Make requiring I2C pullups be optional
 2020-01-10 11:42:44 -08:00
Scott Shawcroft
8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults 
Urandom hardfaults
 2020-01-10 11:37:59 -08:00
Hierophect
1544d60000 working control 2020-01-10 13:09:14 -05:00
Hierophect
1229de4499 attempt to get control going again 2020-01-10 12:56:22 -05:00
Dan Halbert
360c876be4 add flag to i.mx port 2020-01-10 09:20:21 -05:00
Kamil Tomaszewski
357506dd9a Fix board_timerhook 2020-01-10 13:59:52 +01:00
Dan Halbert
9c167af17a wip; redid flash writing to be compatible with SD 2020-01-09 17:40:02 -05:00
Dan Halbert
189f2d5f07 Make requiring I2C pullups be optional 2020-01-09 17:31:50 -05:00
Hierophect
4ec588bb37 spacing changes and text fix 2020-01-09 16:17:57 -05:00
Hierophect
e509115630 Merge branch 'master' into stm32-i2c-rework 2020-01-09 16:01:31 -05:00
Jeff Epler
d7c6d9cabd
Merge pull request #2459 from hierophect/stm32-spi-oneline 
STM32: Allow simplex SPI
 2020-01-09 10:03:44 -06:00
Jeff Epler
1c6efb9e66 os.urandom: remove unneeded sleep 2020-01-08 16:48:17 -06:00
Hierophect
10eed78dd8 use CFLAG to properly set define 2020-01-08 17:37:20 -05:00
Hierophect
b74e78d2c0 Merge remote-tracking branch 'upstream/master' into stm32-cpython-compat 2020-01-08 17:11:50 -05:00
Hierophect
270f0dfc7c text fix 2020-01-08 15:58:20 -05:00
Hierophect
ae22305869 Corrections to I2C, style 2020-01-08 15:55:53 -05:00
Scott Shawcroft
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes 
Fixes for JEplayer
 2020-01-08 12:50:13 -08:00
Hierophect
a9633a3c94 Reorganize I2C workaround, style changes 2020-01-08 15:33:35 -05:00
Roy Hooper
1caf6bd8d3 add missing .h file 2020-01-08 15:23:38 -05:00
Roy Hooper
e1c1e32ceb address code review 2020-01-08 15:17:54 -05:00
Roy Hooper
4e040b0152 add reset of heap to board reset for nrf port 2020-01-08 15:15:27 -05:00
Roy Hooper
34c9e00f08 try (re)using the buffer in neopixel_write 2020-01-08 15:14:53 -05:00
Scott Shawcroft
7a94940c89
Replace magic number and add comment. 2020-01-08 11:01:43 -08:00
Scott Shawcroft
d4492aaed0
Merge remote-tracking branch 'adafruit/master' into packet_buffer 2020-01-08 10:44:37 -08:00
Hierophect
d222c64538 Merge branch 'stm32-spi-oneline' into stm32-i2c-rework 2020-01-08 13:03:38 -05:00
Hierophect
90613aa5fb more cleanup and style syncing 2020-01-08 13:03:25 -05:00
Hierophect
b0f08ba465 Close algorithm edge case to match SPI 2020-01-08 12:32:43 -05:00
Jeff Epler
b3fb024301 nrf: Call into sd as many times as necessary to fill urandom request 
Generating 51200 bytes in one go takes 4.966s, so that's a rate of about
10KiB/s.
 2020-01-08 10:06:55 -06:00
Hierophect
3d5528b88f style edits 2020-01-08 10:53:53 -05:00
Dan Halbert
8d629a957d
Merge pull request #2367 from iot49/mtime 
fix mtime on file creation
 2020-01-07 17:19:40 -05:00
Scott Shawcroft
817c4af60c
Merge pull request #2456 from arturo182/mimxrt10xx 
Add initial MIMXRT10XX port implementation
 2020-01-07 13:58:09 -08:00
arturo182
cc7b57c8d4 mimxrt10xx: Add license for NXP code 2020-01-07 22:07:27 +01:00
Scott Shawcroft
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2 
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
 2020-01-07 12:08:59 -08:00
arturo182
19803c664f mimxrt10xx: Add info on clock config source 2020-01-07 20:05:57 +01:00
Hierophect
d645ea222d Text fixes for consistency 2020-01-07 13:25:24 -05:00
Hierophect
6ab75fe8c5 Allow MOSI/MISO exclusion 2020-01-07 13:19:00 -05:00
arturo182
ff6d9d8a52
mimxrt10xx: Use the correct error for not implemented functionality 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-01-07 09:29:47 +01:00
Hierophect
b778aee21d Make inclusion non-conditional 2020-01-06 17:08:52 -05:00
Hierophect
0bbeae1786 WIP edits 2020-01-06 15:37:37 -05:00
arturo182
13e0cba6f1 Add initial MIMXRT10XX port 2020-01-06 21:08:49 +01:00
Hierophect
fff5f8eb65 Merge remote-tracking branch 'upstream/master' into stm32-meowbit 2020-01-06 11:31:25 -05:00
Hierophect
7198cc8ed6 Changes to UF2 settings, reboot working, no usb 2020-01-06 11:30:23 -05:00
Radomir Dopieralski
59ded1131f Take display offsets for PewPew M4 from the bootloader config 
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
 2020-01-06 14:24:30 +01:00
Dan Halbert
390337b9a5 wip; compiles 2020-01-05 23:33:42 -05:00
Hierophect
f355642eab Boot linker edits 2020-01-04 16:29:31 -05:00
Hierophect
d0fab1c728 Clean up debugging edits 2020-01-04 13:53:31 -05:00
Hierophect
36088becc9 PWM Fix, plus debugging 2020-01-04 13:35:53 -05:00
Marius-450
3ad3d49959 changes only for monster m4sk 2020-01-04 12:32:49 -05:00
Scott Shawcroft
82fb761c0f
Add PacketBuffer and MTU negotiation support. 
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.

This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
 2020-01-03 17:29:54 -08:00
Scott Shawcroft
776c9b011c
Merge pull request #2432 from tannewt/fix_nrf_uart 
Fix nRF UART reset
 2020-01-03 16:57:59 -08:00
Scott Shawcroft
f6ec1ea172
Throw an error when we cannot allocate PWM pixel buffer 2020-01-03 15:15:36 -08:00
Scott Shawcroft
6afb8dadbc
Change SPI and I2C in the same way. 2020-01-03 15:14:37 -08:00
Dan Halbert
242d572470 wip 2020-01-03 10:24:07 -05:00
Jeff Epler
bd8650d35b samd/peripherals: take upstream update 2020-01-02 17:55:50 -06:00
Dan Halbert
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update 
Update the PewPew M4 board and circuitpython-stage
 2020-01-01 13:59:02 -05:00
Dan Halbert
c7d68fc3bc
Merge pull request #2440 from adafruit/tannewt-hwm4-uart-pins 
Fix Hallowing M4 Express UART pin mapping
 2019-12-30 23:45:14 -05:00
Dan Halbert
f0d34da556 add display support; rotation 270 2019-12-30 17:39:39 -05:00
Dan Halbert
3f9ebd2fed initial CLUE board defn 2019-12-30 17:10:42 -05:00
Hierophect
28b1d718a3 Tests for PWM issues, style changes 2019-12-30 15:15:55 -05:00
Scott Shawcroft
0223589e6c
Fix default UART too 2019-12-30 11:34:51 -08:00
Scott Shawcroft
e1d026f815
Update pins.c 2019-12-30 11:33:04 -08:00
Dan Halbert
264abd4741
Merge pull request #2428 from hathach/samd-improve-usb 
improve usb dcd samd51
 2019-12-30 13:39:17 -05:00
Hierophect
e9dbc34d80 add cypthon compat setting 2019-12-30 11:35:02 -05:00
Hierophect
5b9209aa02 Merge remote-tracking branch 'upstream/master' into stm32-meowbit 2019-12-30 11:17:12 -05:00
Scott Shawcroft
cfd71d9023
Fix nRF UART reset 
disable only turns off ENABLE but doesn't set the init tracking that
nrfx uses. uninit hangs if ENABLE is off and is called because it
waits forever for TX to stop.
 2019-12-27 20:18:07 -08:00
hathach
62c4028cde
sync with https://github.com/hathach/tinyusb/pull/246 
should fix slow enumeration
 2019-12-26 23:04:16 +07:00
Jerry Needell
d38a0007f1 define board.VOLTAGE_MONITOR for feather_stm32f405_express 2019-12-26 08:46:27 -05:00
Jeff Epler
5aa3e3eabb samd/peripherals: update 2019-12-24 09:36:19 -06:00
Hierophect
b49ecc52b9 text fixes 2019-12-23 14:55:26 -05:00
Radomir Dopieralski
b06057395b Update PewPew M4 
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
 2019-12-23 18:37:36 +01:00
Ha Thach
21cbd5ce96
Merge pull request #2379 from hierophect/update-tusb 
Update Tinyusb
 2019-12-23 17:58:26 +07:00
Scott Shawcroft
f60b6481e0
Turn off gamepad on cpx crickit 2019-12-20 12:14:27 -08:00
Scott Shawcroft
b859e2b710
Remove re from CPX Displayio build to make space. 2019-12-20 11:43:56 -08:00
Scott Shawcroft
f08c7d470d
Merge pull request #2410 from jepler/nrf-extended-samplerate 
nrf: PWMAudioOut: 62500Hz limitation is not needed
 2019-12-20 09:31:02 -08:00
Jeff Epler
d31a387ace circuitplayground_express_displayio: reduce inlining to make .ko translation fit 2019-12-19 16:11:29 -06:00
Jeff Epler
51af8aadb7 nrf: PWMAudioOut: 62500Hz limitation is not needed 
.. and it gets in the way of some example programs, due to the way
circuitplayground library generates different frequency sine waves
 2019-12-19 10:34:56 -06:00
ndgarage
16688180c6 add-ndbit6 2019-12-19 07:17:43 -07:00
Hierophect
902e242237 Revert "enable internal SPI intercepts. can brick USB" 
This reverts commit 5b70fa0a64.
 2019-12-18 17:17:06 -05:00
Hierophect
5b70fa0a64 enable internal SPI intercepts. can brick USB 2019-12-18 15:40:08 -05:00
Hierophect
3a5de7effd Remove merge overflow 2019-12-18 14:46:12 -05:00
hathach
d1f045880d Merge branch 'master' into hierophect-update-tusb 2019-12-18 16:52:04 +07:00
Ha Thach
25df6e613a
Merge pull request #2395 from hathach/nrfx-v2 
upgrade nrfx API to v2
 2019-12-18 16:14:25 +07:00
hathach
dad2663337 update nrfx submodule to v2 2019-12-18 15:39:11 +07:00
Scott Shawcroft
e9cb47ffbd
Merge pull request #2393 from dhalbert/increase-cpx-stack 
Increase CPX stack size slightly
 2019-12-17 14:35:37 -08:00
Hierophect
ba19cd9ecb Internal filesystem displayIO test 2019-12-17 17:33:49 -05:00
Hierophect
f136ef2b91 add most remaining pindefs 2019-12-17 14:00:35 -05:00
Hierophect
4bfb255a1c merge Thach's suggestion 2019-12-17 12:58:16 -05:00
Jeff Epler
8137ac4c49 nRF: PWMAudioOut: handle non-looping rawsamples 2019-12-17 08:59:08 -06:00
hathach
894cad2e17 upgrade nrfx API to v2 2019-12-17 21:39:52 +07:00
hathach
ebc21144b8
stm32 explicitily enable/disable vbus sense, fix warning 2019-12-17 10:55:19 +07:00
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
JoeBakalor
03ea9ff66e reset atmel-samd submodule to correct commit 2019-12-16 16:31:44 -05:00
Joe Bakalor
822828b9a4
Merge pull request #6 from adafruit/master 
Pull master
 2019-12-16 15:06:58 -05:00
JoeBakalor
2abccc1745 update vid and pid for teknikio_bluebird 2019-12-16 08:58:56 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk 2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk 2019-12-16 12:18:16 +05:00
JoeBakalor
32744a04e1 update bluebird make file 2019-12-13 09:08:21 -05:00
Joe Bakalor
3992a870e5
Merge branch 'master' into teknikio/bluebird 2019-12-13 08:55:15 -05:00
JoeBakalor
4bee6536c9 updates to bluebird 2019-12-13 08:52:03 -05:00
Joe Bakalor
b484c89b73
Merge pull request #4 from adafruit/master 
Pull master
 2019-12-13 08:51:06 -05:00
Hierophect
99c02b5afb usb not working... 2019-12-12 17:53:04 -05:00
Hierophect
e4fb414b91 clean up definitions post merge 2019-12-12 17:17:29 -05:00
Hierophect
ab3762d8f5 Merge branch 'dumb-git-stuff' into stm32-meowbit 2019-12-12 16:34:11 -05:00
Hierophect
7e0719117b Revert "remove F401 additions to streamline" 
This reverts commit 12737e2821.
 2019-12-12 16:32:33 -05:00
Hierophect
2be18a7b53 revert dumb thing 2019-12-12 16:30:24 -05:00
Hierophect
842f8b2d3d Revert "Remove meowbit for now" 
This reverts commit 006182f4e8.
 2019-12-12 16:27:32 -05:00
Dan Halbert
ef2ef7a6b8 merge from master 2019-12-12 15:51:13 -05:00
Dan Halbert
e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
Dan Halbert
7889b999cc Fix flash write error handling; clean up safe mode message printing 2019-12-12 14:41:49 -05:00
Hierophect
9339903a30 Revert "delete old boards" 
This reverts commit 00e953e86c.
 2019-12-12 13:24:46 -05:00
Hierophect
d44a758a2d Add no VBUS option to blackpill 2019-12-12 12:48:37 -05:00
Hierophect
39f3063ed4 Merge remote-tracking branch 'upstream/master' into update-tusb 2019-12-12 12:47:48 -05:00
Hierophect
885a1415d0 Update stm32 usb.c 2019-12-12 12:47:40 -05:00
JoeBakalor
dde7c5e145 Merge branch 'master' of https://github.com/Teknikio/circuitpython 2019-12-12 08:59:37 -05:00
Joe Bakalor
bf4138b0e4
Merge pull request #3 from adafruit/master 
Pull master
 2019-12-12 08:59:22 -05:00
Dan Halbert
fd03fd5e4f sd_flash_operation_status should be volatile 2019-12-12 00:19:03 -05:00
Dan Halbert
8176325130 Merge remote-tracking branch 'adafruit/master' into ld-cleanup 2019-12-11 22:52:59 -05:00
Hierophect
70d899d354 WIP to successful USB test 2019-12-11 17:58:21 -05:00
Dan Halbert
ae64a669dd address review comments 2019-12-11 15:43:06 -05:00
JoeBakalor
0da5dceccf update bluebird makefile 2019-12-11 15:25:16 -05:00
JoeBakalor
a273a7c55e add remaining peripheral pin maps and digital/analog pin definitions 2019-12-11 15:23:16 -05:00
JoeBakalor
006d85d5c2 add make file and board configuration, add accelerometer pin mappings 2019-12-11 14:49:59 -05:00
Scott Shawcroft
e5adf3c43f
Merge pull request #2361 from hierophect/stm32-blackpill 
STM32: Blackpill Support
 2019-12-11 11:07:23 -08:00
Dan Halbert
1e11f2708b remove debugging leftovers 2019-12-11 09:34:56 -05:00
iot49
73b6e5d8e6 added correct include files 2019-12-10 19:44:11 -08:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
hierophect
30aba46735
Merge branch 'master' into stm32-blackpill 2019-12-10 15:38:42 -05:00
Hierophect
33233934e9 text fix 2019-12-10 15:13:11 -05:00
Hierophect
0e2a03e3bd revert usb.c additions 2019-12-10 15:07:39 -05:00
Jeff Epler
a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Jeff Epler
a484a93b29 nRF: disk_read must be 4-byte aligned 
.. a requirement that oofatfs needs to be taught to respect.

This problem can be demonstrated with the following snippet, except
that the related file ("test.bin") must also be contiguous on the
filesystem.  You can ensure this by reformatting your device's filesystem
before testing, then copying any single file bigger than 4kB to test.bin.

    f = open("test.bin", "rb")
    f.seek(2048)
    b = bytearray(2048)
    v = memoryview(b)
    f.readinto(v[909:])

Closes: #2332
 2019-12-10 14:03:06 -06:00
Hierophect
e328e9c106 minor text changes 2019-12-10 15:02:38 -05:00
Scott Shawcroft
387ab6c87e
Merge pull request #2315 from hierophect/stm32-pyb-nano 
STM32: Add PYB Nano support
 2019-12-10 11:25:07 -08:00
Scott Shawcroft
dda9ea09b1
Merge pull request #2363 from jepler/samd-neopixel 
samd: neopixel: Fix neopixels after #2297
 2019-12-10 11:23:18 -08:00
Scott Shawcroft
8497ea8aab
Merge pull request #2365 from dhalbert/cpb-power-switch 
Add POWER_SWITCH pin to CPB
 2019-12-10 10:53:45 -08:00
Joe Bakalor
dbc28e35c5
Merge pull request #2 from adafruit/master 
Pull master
 2019-12-10 11:50:49 -05:00
iot49
0712c95225 fix mtime on file creation 2019-12-09 23:14:26 -08:00
Dan Halbert
60f399395a Add POWER_SWITCH pin to CPB 2019-12-09 18:30:24 -05:00
Scott Shawcroft
19ac8aea8c
Merge pull request #2353 from jepler/audiosample-protocol 
Convert audiosamples to use micropython "protocols" (safely)
 2019-12-09 14:50:16 -08:00
Hierophect
b0a5e81c46 Merge remote-tracking branch 'upstream/master' into stm32-meowbit 2019-12-09 12:29:00 -05:00
Hierophect
00e953e86c delete old boards 2019-12-09 12:28:25 -05:00
Jeff Epler
13620cc4db nRF: PWMAudioOut: fix half-speed playback of stereo samples 
The "spacing" of "buffer structure" is confusing, use the "channel count"
instead.

Testing performed on nrf52840 feather:

Play stereo and mono, 8- and 16-bit, 8kHz RawSamples representing 333.33Hz
square waves.

Use both mono and stereo PWMAudioOut instances.

Scope the RC-filtered signal and use the scope's frequency
measurement function, verify the frequency is 333 or 334Hz in all tested
cases.

In the "stereo output" cases, verify both the L and R channels.  Verify
the output amplitude is the same in both channels.

In the "stereo output" cases, run a second test where the L channel's
amplitude is attenuated 50%. Verify the output amplitude is correct
in each channel.
 2019-12-09 10:57:55 -06:00
Jeff Epler
1905d0746d samd: neopixel: Fix neopixels after #2297 
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.

This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)

Testing performed on a Metro M4:
 * measured timings using o'scope and found all values within
   datasheet tolerance.
 * Drove a string of 96 neopixels without visible glitches
 * on-board neopixel worked

Testing performed on a Circuit Playground Express (M0):
 * Color wheel code works on built-in neopixels
 * Color wheel code works on 96 neopixel strip

As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)

Closes: #2297
 2019-12-07 19:19:45 -06:00
Dan Halbert
f5e913101c
Merge pull request #2301 from tannewt/support_extended_advertising 
Add support for extended (>31 byte) BLE advertisements.
 2019-12-06 23:51:05 -05:00
Scott Shawcroft
da0ea979ff
Check connection validity after service discovery. 
Fixes #2347
 2019-12-06 16:03:14 -08:00
Hierophect
dd4d3a662d conditional for F412 register difference 2019-12-06 16:44:17 -05:00
Hierophect
252da17bc9 Create VBUS disable interface in shared supervisor 2019-12-06 15:55:00 -05:00
Dan Halbert
559ce6a949
Merge pull request #2356 from tannewt/central_pairing 
Add connection interval and debugging
 2019-12-06 15:19:40 -05:00
Dan Halbert
d628d2a261 atmel-samd working 2019-12-06 15:18:20 -05:00
Scott Shawcroft
840f88b8f0
Merge pull request #2350 from hierophect/stm32-neopixel-fix 
Fix for neopixels on <100MHz STM32 boards
 2019-12-06 10:40:50 -08:00
Hierophect
6c8503b3c6 VBUS fix actually doesn't work 2019-12-06 12:39:22 -05:00
Hierophect
2a01f0806e text fixes 2019-12-06 11:58:26 -05:00
Hierophect
0ae08e275d remove pyb nano folder 2019-12-06 11:54:01 -05:00
Hierophect
f6d0e912c9 remove old 401 files 2019-12-06 11:52:40 -05:00
Hierophect
2dcfc9d411 USB fixes and cleanup 2019-12-06 11:41:38 -05:00
Dan Halbert
a0721fc94a Merge remote-tracking branch 'adafruit/master' into ld-cleanup 2019-12-05 22:46:38 -05:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Hierophect
9b43d5ced4 Merge remote-tracking branch 'upstream/master' into stm32-blackpill 2019-12-05 14:25:39 -05:00
Hierophect
c53496a55e remove redundant NOPs 2019-12-05 12:45:09 -05:00
Hierophect
f3f2c7f5de change default phase for SPI 2019-12-05 11:38:20 -05:00
Scott Shawcroft
17c8356b8c
Add connection interval and debugging 
This also sets TinyUSB to master and to not include its submodules.

It also fixes an old displayio example comment and retries gattc
reads.
 2019-12-04 14:39:02 -08:00
Scott Shawcroft
19dc219ff7
Merge pull request #2351 from hierophect/stm32-i2c-never-reset 
STM32: Add I2C never reset
 2019-12-04 10:26:51 -08:00
Hierophect
3de1b9edbe Merge remote-tracking branch 'upstream/master' into stm32-displayio 2019-12-04 10:50:14 -05:00
Jeff Epler
238e121236 protocols: Allow them to be (optionally) type-safe 
Protocols are nice, but there is no way for C code to verify whether
a type's "protocol" structure actually implements some particular
protocol.  As a result, you can pass an object that implements the
"vfs" protocol to one that expects the "stream" protocol, and the
opposite of awesomeness ensues.

This patch adds an OPTIONAL (but enabled by default) protocol identifier
as the first member of any protocol structure.  This identifier is
simply a unique QSTR chosen by the protocol designer and used by each
protocol implementer.  When checking for protocol support, instead of
just checking whether the object's type has a non-NULL protocol field,
use `mp_proto_get` which implements the protocol check when possible.

The existing protocols are now named:
    protocol_framebuf
    protocol_i2c
    protocol_pin
    protocol_stream
    protocol_spi
    protocol_vfs
(most of these are unused in CP and are just inherited from MP; vfs and
stream are definitely used though)

I did not find any crashing examples, but here's one to give a flavor of what
is improved, using `micropython_coverage`.  Before the change,
the vfs "ioctl" protocol is invoked, and the result is not intelligible
as json (but it could have resulted in a hard fault, potentially):

    >>> import uos, ujson
    >>> u = uos.VfsPosix('/tmp')
    >>> ujson.load(u)
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    ValueError: syntax error in JSON

After the change, the vfs object is correctly detected as not supporting
the stream protocol:
    >>> ujson.load(p)
    Traceback (most recent call last):
      File "<stdin>", line 1, in <module>
    OSError: stream operation not supported
 2019-12-04 09:29:57 -06:00
Hierophect
e6b45656f9 Add module and empty parallelbus 2019-12-03 17:18:42 -05:00
Hierophect
012b3bdf18 Add I2C never reset, SPI bugfix 2019-12-03 16:18:49 -05:00
Hierophect
45a6b03d40 copy from busted branch 2019-12-03 15:30:12 -05:00
Scott Shawcroft
fce81e6868
Merge pull request #2297 from jepler/tick-refactor 
Call background tasks only once per ms
 2019-12-02 16:45:51 -08:00
Hierophect
12737e2821 remove F401 additions to streamline 2019-12-02 12:28:48 -05:00
Jeff Epler
002f5c0f1c samd: trinket_m0: make board fit again 2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9 2019-12-02 07:27:03 -06:00
Jeff Epler
95d9c49e43 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-29 11:27:09 -06:00
Jeff Epler
d843156a5e samd: Consolidate small build optimization flags 
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
 2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a Squeeze pyruler zh_Latn_pinyin 2019-11-27 14:47:35 -05:00
Dan Halbert
b32a9192df make UART.write be blocking on SAMD; add timeout property 2019-11-27 13:05:29 -05:00
Scott Shawcroft
3fc58cee38
Merge remote-tracking branch 'adafruit/master' into support_extended_advertising 2019-11-26 13:12:43 -08:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master 
Add shIRtty board
 2019-11-26 15:23:56 -05:00
Dan Halbert
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name 
Set USB_INTERFACE_NAME for winterbloom_sol
 2019-11-26 15:17:14 -05:00
Thea Flowers
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol 2019-11-26 10:59:12 -08:00
Thomas Sarlandie
2647ea0754 fix: disable touchio to save some space 2019-11-26 19:26:18 +01:00
Scott Shawcroft
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space 
Once we use PixelBuf, the library will be much smaller.
 2019-11-26 09:31:44 -08:00
Jeff Epler
82f55dc046 atmel-samd: reduce inlining on constrained boards again 
pewpew10, pirkey_m0, and uchip all fit now.  However, pirkey_m0
now has just 76 bytes flash available.
 2019-11-26 08:50:55 -06:00
Jeff Epler
3ed6de7baf atmel-samd: reduce inlining on pyruler again 
By tweaking the optimizer flags further, this build also fits
 2019-11-26 08:50:55 -06:00
Jeff Epler
2e4a6b94e7 atmel-samd: get most constrained m0 builds to work again 
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
 2019-11-26 08:50:45 -06:00
Scott Shawcroft
e5dd78d393
Merge pull request #2324 from jepler/nrf-i2s-channels-widths 
nrf: assign channel width and count correctly
 2019-11-25 16:59:08 -08:00
Scott Shawcroft
2653455ded
Merge pull request #2321 from jepler/nrf-i2s-buglets 
Nrf i2s buglets
 2019-11-25 16:11:43 -08:00
Thomas Sarlandie
11dc572bce feature: our own PID - thanks @ladyada 2019-11-25 21:56:42 +01:00
Jeff Epler
1ee35fd6fd nrf: i2sout: move register settings closer together 
.. just for consistency's sake
 2019-11-25 11:43:51 -06:00
Jeff Epler
47a6eaa297 nrf: i2sout: Assign SWIDTH 
The sample width register was never set, so all samples were played
as though they were 16 bit.

After this change, 8-bit samples no longer produce audio on the MAX 98357A
BOB, because only 16-, 24-, and 32-bit samples are supported by the
hardware.  This will be addressed by a future change to pad samples to
16 bits; see #2323 and the 98357A datasheet page 6.
 2019-11-25 11:43:29 -06:00
Jeff Epler
8f4bab2d24 i2sout: Correctly retrieve channel_count 
The meaning of the "single channel" parameter is not well-documented,
but in fact it seems that "true" must be passed or else the returned
channel_count is always 1.  This caused stereo samples to be played
incorrectly.
 2019-11-25 10:59:59 -06:00
Thomas Sarlandie
fc71ed9789 add shirtty board - hackaday supercon 2019 addon 2019-11-25 17:44:41 +01:00
Dan Halbert
d154d11911
Merge pull request #2320 from jepler/nrf-unsigned-audio-crash 
nrf: i2sout: Fix double-increment when copying samples
 2019-11-25 11:42:16 -05:00
Jeff Epler
c9946dfd63 nrf: i2sout: Use <, not !=, for loop condition 
This is good C style, h/t @danh
 2019-11-25 09:35:57 -06:00
Jeff Epler
19d122e546 nrf: i2sout: Fix double-increment when copying samples 
This caused two problems when playing unsigned samples:
 * When an even number of samples were present, it "worked" but only
   every other sample was copied into the output, changing the waveform
 * When an odd number of samples were present, the copy continued beyond
   the end of the buffers and caused a hard fault
 2019-11-25 09:07:20 -06:00
Dan Halbert
1ccb7b4c5e cosmetic commit, mostly to re-run 2019-11-22 16:30:10 -05:00
Dan Halbert
13375d16f1 change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
Jeff Epler
bfdfe0e681 stm32: fix uses of ticks_ms global 2019-11-22 14:30:08 -06:00
Jeff Epler
77b78d7fb9 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-22 14:28:51 -06:00
Jeff Epler
1c6c9a3e1f nrf: i2sout: Ensure hardware I2S is stopped at deinit 
.. otherwise, it may be possible under some scenario, for the background
task to continue and overwrite unrelated memory.
 2019-11-22 14:15:07 -06:00
Dan Halbert
e18d3e0f76 Merge branch 'master' into m4-network-ps2io 2019-11-22 15:02:52 -05:00
Jeff Epler
aabb56c840 nrf: i2sout: Only update hold_value when appropriate 
If we put no samples into the buffer, then there is no last
sample to fill out hold_value with.  (and, in fact, the expression such
as *(uint32_t*)(buffer-4) is outside an allocated region)

Detect this condition, and leave the prior value in place.

This improves clicks heard when pausing and resuming a waveform.
 2019-11-22 13:54:37 -06:00
Dan Halbert
1a62a9cb17 remove network from kicksat_sprite 2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700 turn off network in pewpew_m4 2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874 Merge remote-tracking branch 'adafruit/master' into testing-fixes 2019-11-22 11:55:34 -05:00
Hierophect
352bd95f5a remove blackpill 2019-11-22 11:19:39 -05:00
Dan Halbert
228a619af5 enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00
Hierophect
0d8eb3cfb4 add correct VID/PID pairs 2019-11-22 10:54:35 -05:00
Hierophect
6a7c8d6341 minor fix 2019-11-21 20:56:05 -05:00
Scott Shawcroft
743bc829ab
Clean up debug changes 2019-11-21 16:39:57 -08:00
Scott Shawcroft
e63796c7bc
Special exception message for when pairing prompt is ignored. 2019-11-21 16:32:42 -08:00
Scott Shawcroft
39f4046f70
Fix pairing when peripheral. Central untested. 2019-11-21 16:32:42 -08:00
Hierophect
b5ff9684bb remove misplaced status LED definitions 2019-11-21 17:09:28 -05:00
Hierophect
4e4ecafd97 Add definitions for PYB Nano and blackpill 2019-11-21 16:53:06 -05:00
Dan Halbert
2adecda5eb
Merge pull request #2311 from tannewt/redo_bleio_errors 
Use BluetoothError in _bleio
 2019-11-21 16:44:26 -05:00
Dan Halbert
e06dc72359
Merge pull request #2307 from hierophect/stm32-spi-cleanup 
STM32: SPI clock rate fix and cleanup
 2019-11-21 16:12:06 -05:00
Hierophect
a96317d566 requested style changes 2019-11-21 14:30:07 -05:00
Hierophect
13d786b2ef added pin defs 2019-11-21 14:27:59 -05:00
Scott Shawcroft
5e857fdb67
Use BluetoothError in _bleio 
This better differentiates errors than using OSError everywhere.
 2019-11-20 14:02:15 -08:00
Hierophect
006182f4e8 Remove meowbit for now 2019-11-20 15:56:00 -05:00
Hierophect
d8d95d9998 Minor meowbit changes 2019-11-20 15:55:13 -05:00
Hierophect
cf4a3237e7 Merge remote-tracking branch 'upstream/master' into stm32-meowbit-etc 2019-11-20 15:31:55 -05:00
Hierophect
9764006f81 add F401 pin definition 2019-11-20 15:30:31 -05:00
Hierophect
3d1b6d9fc8 fix typo 2019-11-20 12:07:12 -05:00
Hierophect
bd9893ab98 clean up SPI module readability 2019-11-20 12:00:45 -05:00
Hierophect
0b558e8714 fix error in SPI busclock selection 2019-11-20 11:34:49 -05:00
wallarug
fce7b89087 removed Robo HAT MM1 M0 board. 2019-11-20 21:34:24 +11:00
Scott Shawcroft
11c2c3443f
Add support for extended (>31 byte) BLE advertisements. 2019-11-19 13:55:58 -08:00
ndgarage
b3d7467719 add-ndbit6 2019-11-19 14:52:09 -07:00
Dan Halbert
1a22d8a0f2
Merge pull request #2291 from hierophect/stm32-neopixel 
STM32: Neopixel support
 2019-11-18 23:45:09 -05:00
Hierophect
4a25c2344e implement os urandom 2019-11-18 18:27:25 -05:00
Hierophect
256abf5505 Add board folders 2019-11-18 16:13:27 -05:00
Hierophect
a4797327cd add microcontroller toggles for status LED 2019-11-18 13:51:59 -05:00
Jeff Epler
40a47d41df samd: background: Allow monitoring time taken in background task 
If you define MONITOR_BACKGROUND_TASK, then a physical output pin
(Metro M4 Express's "SCL" pin by default) will be set HIGH while in
the background task and LOW at other times
 2019-11-18 11:01:24 -06:00
Jeff Epler
7f744a2369 Supervisor: move most of systick to the supervisor 
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports.  This mostly would
have broken gamepad tick support on non-samd ports.

The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read.  Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).

Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.

Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
 2019-11-18 11:01:23 -06:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description 
... to "StringCarM0Ex"
 2019-11-16 16:40:40 -08:00
Hierophect
51078cc38f timing tweaks with testing 2019-11-15 17:17:05 -05:00
Hierophect
98fd372d5b Add missing define 2019-11-15 13:19:37 -05:00
Hierophect
ee1559b921 Merge branch 'pin-commonhal-additions' into stm32-neopixel 2019-11-15 13:09:59 -05:00
Hierophect
81223c76bd revert error 2019-11-15 13:04:25 -05:00
Hierophect
5f290d091e Merge branch 'pin-commonhal-additions' into stm32-neopixel 2019-11-15 13:00:11 -05:00
Hierophect
2c6781f74d move neopixel_in_use flag to shared-bindings 2019-11-15 12:59:52 -05:00
Hierophect
e1579a1cc5 Merge branch 'pin-commonhal-additions' into stm32-neopixel 2019-11-15 12:47:23 -05:00
Hierophect
de5691acf5 Add never_reset and reset to pin common hal, adjust files 2019-11-15 12:47:00 -05:00
Hierophect
6cce2d6d14 Implement Neopixel write, add defaults to f405 2019-11-15 12:28:16 -05:00
KalbeAbbas
8134ceec83
Update pins.c 2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c 2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c 2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f updated 2019-11-14 16:34:08 +05:00
Hierophect
6e96b1945e Raise clock speed, adjust divisors 2019-11-13 13:18:43 -05:00
Dan Halbert
166518fc9b
Merge pull request #2272 from hierophect/stm32-microcontroller-fillout 
STM32: add us delay
 2019-11-12 18:03:55 -05:00
Hierophect
e40bd07fcf fix conflicting definitions on discovery boards 2019-11-12 13:03:13 -05:00
Hierophect
bbc366b85b Style overhaul, extra error checks 2019-11-12 11:26:14 -05:00
Hierophect
ed3e377390 Merge remote-tracking branch 'upstream/master' into stm32-uart 2019-11-12 09:49:17 -05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11 
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. 
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
 2019-11-12 12:48:31 +02:00
Hierophect
14b70806a5 de-init check 2019-11-11 15:47:47 -05:00
Hierophect
e076f14ea3 text fixes 2019-11-11 15:32:47 -05:00
Hierophect
c38086fc4a fix typo 2019-11-11 15:04:22 -05:00
Hierophect
3f8b4727f5 Revise us delay to include interrupt/non-interrupt versions 2019-11-11 14:58:45 -05:00
Dan Halbert
91156670e9
Merge pull request #2271 from theacodes/enable-micropython-native 
Allow boards to enable the `micropython.native` decorator
 2019-11-08 13:42:17 -05:00
Hierophect
d42c4b082d revert sublime being a dumb 2019-11-06 14:55:16 -05:00
Hierophect
39dbcb529a revert git being a dumb 2019-11-06 14:54:07 -05:00
Hierophect
adfef8b520 Merge remote-tracking branch 'upstream/master' into stm32-dac-deinit 2019-11-06 14:46:56 -05:00
Dan Halbert
b8373aca0c
Merge pull request #2266 from hierophect/stm32-defaults 
STM32: Add board defaults
 2019-11-06 14:29:29 -05:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator 
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
 2019-11-05 14:27:53 -08:00
Hierophect
e66fcb5e1f add missing newline 2019-11-05 16:32:34 -05:00
Hierophect
8a098c154d Fix unsaved file 2019-11-05 16:25:30 -05:00
Hierophect
1a7060af25 Add us delay 2019-11-05 16:23:59 -05:00
Joe Bakalor
ba83a4a2ac
Merge pull request #1 from adafruit/master 
Update base
 2019-11-05 11:06:18 -05:00
Hierophect
0b85c4bb20 Merge remote-tracking branch 'upstream/master' into stm32-uart 2019-11-05 10:56:57 -05:00
JoeBakalor
8ab3ef44dd add bluebird template files 2019-11-05 10:52:25 -05:00
Hierophect
dfe73a063d Fix error that would carry past python exception 2019-11-05 10:50:57 -05:00
Thea Flowers
73989dbcaf Add board configuration for Winterbloom Sol 2019-11-04 23:11:42 -08:00
Dan Halbert
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks 
Refine _bleio
 2019-11-04 22:27:54 -05:00
Dan Halbert
c87d6cc6a5
Merge pull request #2248 from hierophect/stm32-PWM 
STM32: PWMOut
 2019-11-04 22:08:01 -05:00
Dan Halbert
f185b30d71
Update PWMOut.h 2019-11-04 20:41:54 -05:00
Hierophect
38e38b9f8d remove redundant comment 2019-11-04 17:20:10 -05:00
Hierophect
632b3267dc Add auto-shutoff of DAC when channels de-inited 2019-11-04 17:08:00 -05:00
Hierophect
40f920fbdf complete attribution edits 2019-11-04 14:39:41 -05:00
Hierophect
ca1eb4def1 Add other board globals 2019-11-04 14:35:23 -05:00
Hierophect
2111a7c4cf Merge branch 'master' into stm32-defaults 2019-11-04 14:32:00 -05:00
Hierophect
3526fed611 add board global 2019-11-04 14:31:57 -05:00
Hierophect
15d8d88950 Add default defines 2019-11-04 14:15:26 -05:00
Hierophect
ccff7e70ca Style changes and refactors 2019-11-04 11:30:49 -05:00
Dan Halbert
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable 
cpb: Disable the onboard speaker until request
 2019-11-03 18:34:29 -05:00
Hierophect
1c4f49bb83 attribution changes 2019-11-03 16:33:01 -05:00
Scott Shawcroft
cd3fcc87ab
Merge pull request #2252 from dhalbert/cpb-two-i2c 
nrf: allocate two I2C on CPB
 2019-11-03 13:15:36 -08:00
Dan Halbert
85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
jepler
2bdccf03a7 cpb: define the SPEAKER_ENABLE_PIN 
This allows the board to disable the onboard speaker until explicitly
enabled in user code.

Testing performed on a CPB:
 * Touching the AUDIO pin with a fingertip no longer generates noise/buzz
 * Generating a waveform with `simpleio.tone` produces no sound by default
 * When the board.SPEAKER_ENABLE is configured as a digital output and
   set True, `simpleio.tone` does produce sound

Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to

    speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
    speaker_enable.direction = digitalio.Direction.OUTPUT
    speaker_enable.value = True

before using the internal speaker.

Closes: #2258
 2019-11-01 16:26:03 -05:00
jepler
fe47eba97f nRF: Handle SPEAKER_ENABLE_PIN 
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
 2019-11-01 16:23:35 -05:00
Hierophect
8d0cc71aee Add write protections, fix edge case read halt 2019-11-01 17:00:01 -04:00
Scott Shawcroft
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks 2019-11-01 13:20:58 -07:00
Hierophect
e605ce6317 Debugging additions 2019-11-01 14:30:28 -04:00
Hierophect
0a1a12b867 Revise PWM period generation algorithm to match other ports 2019-10-31 16:59:44 -04:00
brentru
2f04c5891f flip it around 2019-10-31 14:11:50 -04:00
brentru
ab3da3071c flip MADCTL BGR bit to reflect RGB colors 2019-10-31 10:11:47 -04:00
Hierophect
c78d79938d remove debug output 2019-10-30 17:07:16 -04:00
Hierophect
a8070a4185 Revise IRQ managment, add restart on failure 2019-10-30 16:59:53 -04:00
Hierophect
bb8046dbb3 remove debug messages 2019-10-30 10:00:50 -04:00
ladyada
d2b613134d we should use native rotation, and tweak madctl (not done yet) 2019-10-29 22:53:44 -04:00
ladyada
1e869d1334 switch to 8-bit mode - tested on hardware! 2019-10-29 21:14:45 -04:00
Hierophect
6b0cb87cbf Dynamic prescaler adjustment, adjust pulse resolution 2019-10-29 17:17:26 -04:00
Hierophect
4de5a33a43 Style changes 2019-10-29 10:24:26 -04:00
Hierophect
33deb6752b Add harder resets to UART 2019-10-29 09:41:52 -04:00
Dan Halbert
e35eb08f1d nrf: allocate two I2C on CPB 2019-10-28 21:08:53 -04:00
Dan Halbert
1505da784f wip 2019-10-28 18:15:02 -04:00
Dan Halbert
56ac41fabf
Merge pull request #2240 from theacodes/fix-2086 
Track unadjusted PWM duty cycle to avoid accumulating conversion errors
 2019-10-28 14:50:01 -04:00
Hierophect
3034cfc82f Merge remote-tracking branch 'upstream/master' into stm32-uart 2019-10-28 12:16:01 -04:00
Hierophect
69bf926211 Merge remote-tracking branch 'upstream/master' into stm32-PWM 2019-10-28 12:01:28 -04:00
Dan Halbert
1d7d9043c1 CXD56 is a better platform name 2019-10-28 10:47:09 -04:00
Dan Halbert
358920db0e Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only 2019-10-28 10:40:10 -04:00
Hierophect
c0f1ce590e Add support across dev boards 2019-10-27 20:17:10 -04:00
Hierophect
7fd5e9b867 Fix issue with changing frequency 2019-10-27 19:41:01 -04:00
Hierophect
0cd8c3d5a8 Add all basic functions, never reset, dynamic pulse changes 2019-10-27 19:17:01 -04:00
Jeff Epler
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express 
Initial Itsy nRF52840 defn
 2019-10-27 16:46:28 -05:00
Hierophect
cb491e855c WIP 2019-10-27 14:31:25 -04:00
Dan Halbert
76817eaa10 Merge remote-tracking branch 'adafruit/master' into nano-33-ble 2019-10-25 22:41:26 -04:00
Dan Halbert
ab6fd34828 add object types to rgb status objects;mark spi rgb objects as never_reset 2019-10-25 22:32:43 -04:00
Dan Halbert
7d04d9109e use bitbang SPI for DotStar; still need to fix hw SPI for dotstar 2019-10-25 15:37:27 -04:00
Thea Flowers
4b742f88d9
Fix spelling 2019-10-25 10:50:27 -07:00
Dan Halbert
cdeb0857a9 Initial Itsy nRF52840 defn 2019-10-25 11:15:34 -04:00
Hierophect
cf7efee0d3 Add f405 pindefs 2019-10-24 18:00:50 -04:00
Hierophect
7f769580bd Merge remote-tracking branch 'upstream/master' into stm32-PWM 2019-10-24 14:11:51 -04:00
hierophect
3683ee3ffa
Merge pull request #2243 from hierophect/f405-rename-and-fixes 
STM32: rename feather_stm32f405_express, fix makefile defs issue
 2019-10-24 14:11:17 -04:00
Hierophect
511071e1ba Rename feather across folders and config, fix makefile def issue 2019-10-24 12:51:40 -04:00
Hierophect
64337775f8 PWM Base functionality testing for F405 2019-10-24 12:43:34 -04:00
Thea Flowers
4fdf518251
Track unadjusted PWM duty cycle to avoid accumulating conversion errors 
Fixes #2086

When the frequency of a `PWMOut` is change it re-sets the PWM's duty cycle as
well, since the registers have to be re-calculated based on the new frequency.
Unfortunately, `common_hal_pulseio_pwmout_get_duty_cycle`
will return a value very close to, but not exactly, the value passed to `common_hal_pulseio_pwmout_set_duty_cycle`. If the frequency is modified
without the calling code also re-setting the duty cycle then the duty cycle
will decay over time. This fixes that problem by tracking the unadjusted duty
cycle and re-setting the duty cycle to that value when the frequency is changed.
 2019-10-23 14:34:14 -07:00
ProductDev
4cd5571203 Adds builds for sparkfun_qwiic_micro with and without flash 2019-10-23 15:05:46 -06:00
Dan Halbert
af1fab1915
Merge pull request #2226 from kamtom480/circuitpython-device-open 
Do not open the same PWM device if it is already open
 2019-10-23 15:08:40 -04:00
Scott Shawcroft
91c9d519ae
Refine comments and switch prefix_len to size_t 2019-10-22 23:09:56 -07:00
Hierophect
1d8a75fa3f minor WIP 2019-10-22 13:11:45 -04:00
Hierophect
ca4b7f81e5 Initial template setup 2019-10-22 11:09:46 -04:00
Scott Shawcroft
ae30a1e5aa
Refine _bleio 
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.

It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.

Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.

Relates to #586
 2019-10-21 18:57:03 -07:00
Hierophect
a596213526 non-functional WIP 2019-10-21 17:06:40 -04:00
Kamil Tomaszewski
e4574fa3bf Clean UART on reset 2019-10-21 13:17:51 +02:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Hierophect
af28474b06 IRQ priority and port clearing scratchwork 2019-10-18 14:10:41 -04:00
Kamil Tomaszewski
e2cb29f2a0 Change default stack size to 64kiB for Spresense 2019-10-18 15:43:06 +02:00
Kamil Tomaszewski
3ad13e14d8 Do not open the same UART device again 2019-10-18 12:39:52 +02:00
Kamil Tomaszewski
b39ca3f8be Do not open the same PWM device again 2019-10-18 12:39:22 +02:00
Kamil Tomaszewski
1decd111d5 Do not open the same ADC device again 2019-10-18 12:38:39 +02:00
Kamil Tomaszewski
4338511b28 Add get top and limit functions for Spresense 2019-10-18 11:10:22 +02:00
Kamil Tomaszewski
96756b3945 Add functions to get top and limit stack 2019-10-18 11:04:45 +02:00
Kamil Tomaszewski
30c9ad2b2a Update Spresense SDK to 1.4.1 2019-10-18 10:29:32 +02:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX 2019-10-17 18:02:05 +11:00
Hierophect
14c64159c8 Implement requested changes, refactors 2019-10-16 13:50:54 -04:00
Hierophect
323fe418f7 Add support for other F4 MCUs 2019-10-16 13:14:57 -04:00
Hierophect
552900f18e Merge remote-tracking branch 'upstream/master' into stm32-uart 2019-10-16 12:33:31 -04:00
Hierophect
b4a6246e30 Cleanup 2019-10-16 12:32:34 -04:00
Hierophect
14eefaafee Hack in interrupt support 2019-10-16 11:33:55 -04:00
Dan Halbert
be8136dc6d Merge remote-tracking branch 'adafruit/master' into bonding1 2019-10-15 15:55:21 -04:00
Scott Shawcroft
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master 
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
 2019-10-15 09:46:39 -07:00
Scott Shawcroft
6f2e2faff2
Merge pull request #2214 from dhalbert/remove-unused-ports 
Remove non-CircuitPython ports
 2019-10-15 09:45:53 -07:00
Dan Halbert
a0d18ac4e6 add dummy common_hal_mcu_processor_get_voltage() for spresense 2019-10-15 09:07:12 -04:00
Dan Halbert
eca73436c9 Merge remote-tracking branch 'adafruit/master' into cpu-voltage 2019-10-15 09:03:24 -04:00
Dan Halbert
fdd7ebef2d change calibration from analogin_reset() to analogin_init() 2019-10-14 23:38:41 -04:00
Scott Shawcroft
1a7c787d3c
Merge branch 'master' into master 2019-10-14 19:47:46 -07:00
Dan Halbert
615ec7f74d merge from upstream 2019-10-14 18:12:58 -04:00
Scott Shawcroft
51582abc87
Merge pull request #2207 from kamtom480/circuitpython-spresense 
Add Spresense board
 2019-10-14 14:19:09 -07:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder 2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs 2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions 2019-10-14 11:55:22 -07:00
Kamil Tomaszewski
b750ed3a0f Change Spresense firmware download link 2019-10-14 08:42:10 +02:00
Kamil Tomaszewski
8dfc8b584f Change Spresense reference_voltage to 0.0 (None) 2019-10-14 08:22:14 +02:00
Dan Halbert
9c8f969b34 remove ports/zephyr 2019-10-13 11:09:55 -04:00
Dan Halbert
0bed5f490a remove ports/windows 2019-10-13 11:09:43 -04:00
Dan Halbert
8f792127da remove ports/teensy 2019-10-13 11:09:03 -04:00
Dan Halbert
fc033bd954 remove ports/stm32 2019-10-13 11:08:52 -04:00
Dan Halbert
7bc02ad3ba remove ports/qemu-arm 2019-10-13 11:08:35 -04:00
Dan Halbert
6dcaeae8c7 remove ports/pic16bit 2019-10-13 11:08:08 -04:00
Dan Halbert
c575cd7bc7 remove ports/minimal 2019-10-13 11:07:40 -04:00
Dan Halbert
7692e06230 remove ports/esp8266 2019-10-13 11:07:07 -04:00
Dan Halbert
41ef2ab591 remove ports/esp32 2019-10-13 11:06:54 -04:00
Dan Halbert
b0d656683b remove ports/cc3200 2019-10-13 11:06:33 -04:00
Dan Halbert
3d17e1d418 remove ports/bare-arm 2019-10-13 11:06:17 -04:00
Dan Halbert
c1ab2486f9 return chip vcc value 2019-10-12 15:42:15 -04:00
Jeff Epler
fae6e29546 nrf: PWMAudioOut: deactivate PWM when deinitting self 
.. otherwise, when an AudioPWMOut object was deinitted without being
explicitly stop()ped, it would use up a slot in active_audio[]; the
5th iteration would create a non-working audio object which would just
buzz instead of playing the right thing.

Closes: #2203
 2019-10-12 14:01:35 +09:00
Jeff Epler
ef459326cb nrf: PWMAudioOut: coding style 2019-10-12 13:57:31 +09:00
Hierophect
1140ff5cd5 WIP 2019-10-11 15:47:55 -04:00
Kamil Tomaszewski
6b9375804c Rename circuitpython.spk to firmware.spk 2019-10-11 17:15:25 +02:00
Kamil Tomaszewski
771f43591a Add links to serial drivers 2019-10-11 12:57:43 +02:00
Kamil Tomaszewski
eb1dfd2312 Add .gitignore 2019-10-11 12:11:48 +02:00
Kamil Tomaszewski
0d139e4eca Add a way to change serial device name 2019-10-11 12:09:51 +02:00
Kamil Tomaszewski
c062990830 Make Makefile work across OS 2019-10-11 12:09:51 +02:00
Kamil Tomaszewski
8f653d6238 Use CXD56 pin names 2019-10-11 12:09:51 +02:00
Kamil Tomaszewski
5f09609d41 Add Spresense board folder 2019-10-11 12:09:51 +02:00
Kamil Tomaszewski
1fa8841d20 Change port name to cxd56 2019-10-11 08:23:51 +02:00
Hierophect
bfebbaee32 Merge remote-tracking branch 'upstream/master' into stm32-uart 2019-10-10 14:28:19 -04:00
Hierophect
06b2fed518 improve macro readability 2019-10-09 16:06:23 -04:00
hierophect
4ce7a4cfdb
Merge branch 'master' into stm32-DAC 2019-10-09 15:47:43 -04:00
Hierophect
5f33c542b4 Fix include issues 2019-10-09 14:52:30 -04:00
Hierophect
8a94f25181 Text fixes 2019-10-09 13:54:40 -04:00
Hierophect
cb0ed264c4 Implement DAC 2019-10-09 13:34:20 -04:00
Kamil Tomaszewski
6d1748fd59 Add spresense-exported-sdk submodule 2019-10-09 08:38:50 +02:00
Kamil Tomaszewski
526925f1c6 Add Spresense board 2019-10-09 08:27:08 +02:00
Hierophect
f58d54cd22 Preliminary read system, not buffered 2019-10-08 16:03:51 -04:00
kamtom480
f6e553f89f
Merge branch 'master' into circuitpython-number-endpoint 2019-10-08 09:41:29 +02:00
Chris Osterwood
137a4f8a5d Added new flash SKU for production hardware 2019-10-07 14:50:39 -04:00
Hierophect
cc3a17845c Fix USB issues, frequency macro, F412 tests 2019-10-07 14:22:12 -04:00
hierophect
59ed879c8f
Merge pull request #2197 from hierophect/always-build-modules 
Sort some modules into ALWAYS-BUILD in mpconfig
 2019-10-07 09:09:28 -04:00
Kamil Tomaszewski
7aefcc449a Add an alternative way to number the USB endpoints 
Two options available:
- relative numbering (USB_RELATIVE_EP_NUM = 1) - default
- absolute numbering (USB_RELATIVE_EP_NUM = 0) - new!
 2019-10-07 12:31:42 +02:00
Dan Halbert
fc19e03128 WIP: bonding 2019-10-06 21:30:26 -04:00
Hierophect
0b85172ba6 WIP 2019-10-04 14:37:18 -04:00
Hierophect
51901f7de0 Add peripheral definitions 2019-10-04 11:42:38 -04:00
Hierophect
dc4abb922b Revert accidental OS delete 2019-10-03 15:40:46 -04:00
hierophect
f4922a530a
Merge pull request #2186 from hierophect/stm32-spi-flash 
STM32: SPI Flash
 2019-10-03 15:32:56 -04:00
Hierophect
7a2f60c43d Add Always Build flag, remove redundancy 2019-10-03 15:23:45 -04:00
Hierophect
eacdb1da6e Disable timeout, remove redundancy 2019-10-03 14:43:25 -04:00
Dan Halbert
463415a7ef update stm32f4 port to use tinyusb synopsys tree 2019-10-03 13:26:03 -04:00
Hierophect
83c49a5c80 Increase SPI timeout duration 2019-10-03 09:14:54 -04:00
Hierophect
5a6194839b Timeout fix for I2C device testing 2019-10-02 17:59:42 -04:00
Hierophect
86305bfdfe Make all errors value errors 2019-10-02 17:32:54 -04:00
Hierophect
9aa6d215fd Add some definitions for when F412 can be implemented 2019-10-02 16:03:22 -04:00
Hierophect
5a2f82095a Implement SPI flash settings, bugfix for SPI pin assignment 2019-10-02 15:17:49 -04:00
Scott Shawcroft
d6e987e587
Merge pull request #2182 from hierophect/stm32-spi 
STM32: SPI Support
 2019-09-30 20:00:23 -07:00
Hierophect
b66700720b improve error readability 2019-09-30 18:05:07 -04:00
Hierophect
1f90cffc89 protect against edge case 2019-09-30 13:33:20 -04:00
Hierophect
56eb9666ea Implement never-reset, fix F412 2019-09-30 11:35:40 -04:00
Hierophect
a475b667b5 Clean up debugging messages, remove shortcuts 2019-09-30 11:04:09 -04:00
Hierophect
492bc3eedc Expand pin definitions for all boards 2019-09-30 10:45:02 -04:00
Hierophect
e2d0ad6adc Add settings reconfiguration 2019-09-29 15:01:32 -04:00
Hierophect
bf7b841020 Further reversion 2019-09-29 13:22:12 -04:00
Hierophect
89315999e2 Fix bad returns, revert flash changes 2019-09-29 13:18:43 -04:00
Hierophect
270396a882 Refine SPI settings for testing 2019-09-29 13:01:27 -04:00
Hierophect
d7443fce54 First implementation of read write 2019-09-27 17:59:55 -04:00
Hierophect
ad33950966 Flash memory changes - non functional 2019-09-27 11:00:09 -04:00
Dan Halbert
aa1eed3bd3 initial Arduino Nano 33 BLE board definition 2019-09-26 15:28:57 -04:00