28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
343d5aa0ac
Delete redundant file
2019-07-26 16:48:23 -04:00
90b1701b6c
Add CDC REPL access
2019-07-26 14:06:27 -04:00
a183425e00
ports/nrf: Implement audioio.AudioOut using PWM
...
This implements AudioOut, with known caveats:
* pause/resume are not yet implemented (this is just a bug)
* at best, the sample fidelity is 8 bits (this is a hardware limitation)
Testing performed:
My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected. It is powered from
VUSB.
I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive. This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270
Nothing about the code I've written should limit the usable pins.
All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
2019-07-26 07:57:11 -05:00
2bc704fe07
ports/nrf: factor out routines for allocating, freeing pwm channels
2019-07-26 07:52:37 -05:00
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
d99d3bd471
Merge pull request #2010 from jepler/audiocore
...
audiocore: Factor from audioio
2019-07-25 13:52:30 -07:00
6b44e40ee8
audiocore: Factor from audioio
...
When nrf pwm audio is introduced, it will be called `audiopwmio`. To
enable code sharing with the existing (dac-based) `audioio`, factor
the sample and mixer types to `audiocore`.
INCOMPATIBLE CHANGE: Now, `Mixer`, `RawSample` and `WaveFile` must
be imported from `audiocore`, not `audioio`.
2019-07-25 06:44:26 -05:00
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup
...
Add STM32 Discovery F412ZG and F411RE support
2019-07-24 18:49:48 -07:00
295afaaf6c
Update SystemCoreClock macro
2019-07-24 16:31:25 -04:00
981398406c
Implement working (if useless) USB on F411
2019-07-24 16:23:35 -04:00
21f1ae51df
Merge in PR edits
2019-07-24 15:02:26 -04:00
d66c9590af
Merge tinyusb changes from upstream
2019-07-24 14:54:22 -04:00
a63df51893
Requested changes, general cleanup
2019-07-24 14:21:27 -04:00
c921f6637f
update tinyusb lib to 0.5.x
2019-07-24 16:46:31 +07:00
267468834d
Pin down some TUSB issues
2019-07-23 19:40:26 -04:00
0dee1a1646
Setup for changes
2019-07-23 17:04:03 -04:00
f9b5a9af4e
Merge branch 'F3xx-port-setup' into f411re-tinyusb
2019-07-23 15:17:18 -04:00
5cfde7b6ea
Switch to submodule for cube files
2019-07-23 14:37:30 -04:00
9c1487cff6
Python doc generator fixes
2019-07-23 13:48:59 -04:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
7cb2aa2d62
Merge pull request #1986 from AnthonyDiGirolamo/patch-1
...
Update Arch Linux ARM compiler installation instructions
2019-07-22 19:29:53 -07:00
a3673cc79b
Set up for new tinyusb integration. Not yet functional.
2019-07-22 17:16:33 -04:00
58630a844a
Add feature conditionals and clean up
2019-07-22 12:58:28 -04:00
e4d92a3aad
Fix incorrect preprocessor define NRFX_TIMER3/4
...
Should be NRF_TIMER3 and NRF_TIMER4
2019-07-22 20:07:05 +05:30
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
cdfc169ab6
Correct typo in line meant to turn off frequencyio on M0 which saves 2k code space.
2019-07-19 16:10:32 -07:00
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
10b9ca5a92
pin selection cleanup, tinyUSB update
2019-07-19 15:09:45 -04:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
734012aa8b
Makefile cleanup
2019-07-18 17:55:57 -04:00
755b86e38b
Deinit-capable USB on 411
2019-07-18 17:17:46 -04:00
43e8a4110f
Add missing files for DigitalIO
2019-07-17 14:18:01 -04:00
45e73c414a
fix gitignore
2019-07-17 14:14:03 -04:00
c588cc6db0
first pass of DigitalIO
2019-07-17 14:07:33 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
f31a0d9cf5
Serial REPL support
2019-07-11 13:41:10 -04:00
d12e1a8d74
Merge pull request #1990 from kattni/pyruler
...
Adding PyRuler to CircuitPython.
2019-07-10 12:28:43 -07:00
a0e6975b9d
Add some usb reference material, non functional
2019-07-10 14:26:57 -04:00
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
7742a97c22
Add STM32F412-DISCO support, cleanup
2019-07-09 13:03:22 -04:00
f0cf9a4e75
Merge pull request #1988 from jandjstudios/datum
...
Add support for boards in the datum series.
2019-07-09 09:33:13 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
f4a64a2e80
Merge pull request #1989 from rce1086/master
...
Added conditional compilation around selection of TX pad candidates
2019-07-08 14:07:04 -07:00
64507207da
Added conditional compilation around selection of TX pad candidates
...
Original code was correct for SAMD21
New code for SAMD51 only permits pad-0 for TX
2019-07-08 02:08:39 +01:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
4c72a3991e
updated samd and esp8266 ports
2019-07-05 10:01:51 -07:00
55f15e3c05
Update Arch Linux ARM compiler installation instructions
...
- Add copy-pasteable Arch Linux `arm-none-eabi-gcc` install line similar to Ubuntu example
- Add `arm-none-eabi-newlib` as a required package for Arch
- Reformat Ubuntu and Arch install code-blocks to catch the eye for the impatient
Arch Linux changed their packaging for [arm-none-eabi-gcc](https://www.archlinux.org/packages/community/x86_64/arm-none-eabi-gcc/ ) by creating [arm-none-eabi-newlib](https://www.archlinux.org/packages/community/any/arm-none-eabi-newlib/ ) as an optional package. Without it users will get errors about missing header files like:
```
In file included from asf4/samd51/include/samd51j19a.h:49,
from asf4/samd51/include/sam.h:38,
from ./mpconfigport.h:31,
from ../../py/mpconfig.h:45,
from ../../py/emitnx64.c:3:
/usr/lib/gcc/arm-none-eabi/9.1.0/include/stdint.h:9:16: fatal error: stdint.h: No such file or directory
9 | # include_next <stdint.h>
| ^~~~~~~~~~
compilation terminated.
```
2019-07-04 11:14:50 -07:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
040acc3a32
remove dependencies for stable build
2019-07-01 19:47:10 -04:00
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
94a2eff05c
remove build, fix link issues)
2019-06-28 19:22:23 -04:00
04a9bc0d35
case changes
2019-06-28 16:45:07 -04:00
b93f93f174
name change but actually
2019-06-28 16:34:27 -04:00
caed59ec64
name change
2019-06-28 16:21:13 -04:00
16ba035ba7
first commit, very crude
2019-06-28 15:36:08 -04:00
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
d3adfde22a
Merge pull request #1968 from adafruit/4.0.x
...
Merge in nrf neopixel fix
2019-06-25 11:35:58 -07:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
1356819de1
Handle None for BLE name; fix ScanEntry bug; compile issue
2019-06-17 23:16:40 -04:00
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
a91ad05774
Change to one lto partition for ultimate optimization.
2019-06-12 11:37:46 -07:00
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
608bf5076b
Merge pull request #1804 from ITACAInnovation/master
...
Merging updates
2019-04-16 13:54:40 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
7822d013cd
Merge pull request #1798 from ntavish/papyr
...
Add support for Electronut Labs Papyr.
2019-04-16 10:13:19 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
7573da03f6
Merge pull request #1779 from dhalbert/nrf-nvm-2
...
nrf nvm: touchups to nickzoic PR #1768
2019-04-15 14:23:35 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
19278e0284
Merge pull request #1736 from nickzoic/circuitpython-nickzoic-1046-nrf-rtc-2
...
Circuitpython nickzoic 1046 nrf rtc 2
2019-04-02 17:38:24 -04:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
e254597c24
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-28 17:27:59 -07:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
54a41e0812
Merge branch 'master' into circuitpython-nickzoic-1046-nrf-rtc
2019-03-28 14:48:10 +11:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
Dan Halbert
wallarug
Hierophect
Jeff Epler
Scott Shawcroft
Scott Shawcroft
hathach
Dan Halbert
Tavish Naruka
siddacious
Kattni Rembor
Carl Elkins
jandjstudios
iot49
Anthony DiGirolamo
Radomir Dopieralski
brentru
shazz
Elvis Pfützenreuter
Chris Osterwood
sabas1080
ladyada
ladyada
Carlos
ITACA Innovation S.R.L
Nick Moore
siddacious
Max Holliday
Damiano Mazzella
Melissa LeBlanc-Williams
Sabas