0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
bcda5e133d
Merge pull request #1903 from tannewt/get_area
...
Rework the pixel computation to use areas
2019-05-31 21:27:06 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
3fad7de8db
Rework the pixel computation to use areas
...
This changes the displayio pixel computation from per-pixel to
per-area. This is precursor work to updating portions of the screen
(#1169 ). It should provide mild speedups because bounds checks are
done once per area rather than once per pixel. Filling by area also
allows TileGrid to maintain a row-associative fill pattern even when
the display's refresh is orthogonal to it.
2019-05-21 17:41:06 -07:00
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
80a752da87
Merge latest adafruit/master in.
2019-05-10 10:09:56 -07:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
9ba8191a04
Merge pull request #1855 from dhalbert/frequencyin-no-double-arith
...
avoid double float arithmetic in FrequencyIn
2019-05-08 14:40:18 -04:00
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
f59dadbb4f
avoid double float arithmetic in FrequencyIn
2019-05-07 00:25:22 -04:00
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
9b593cd154
update periph submodule
2019-04-23 18:20:13 -04:00
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
f548305c07
Merge pull request #1815 from dhalbert/stop-flicker
...
Turn off auto_brightness if brightness is set
2019-04-18 15:48:39 -07:00
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
f7c7904e2b
Correct call structure for throwing errors
2019-04-17 13:54:29 -07:00
71c4f100de
Update translations and use same error for PDM too
2019-04-17 11:28:43 -07:00
5865b28592
[audiobusio-I2SOut] Fix translation error
2019-04-17 11:12:38 -07:00
65cc366280
[audiobusio-I2SOut] Fix compilation error by using mp_raise_ValueError_varg
2019-04-17 11:12:38 -07:00
9f63125345
Fix I2SOut message, fix #1765
2019-04-17 11:12:38 -07:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
608bf5076b
Merge pull request #1804 from ITACAInnovation/master
...
Merging updates
2019-04-16 13:54:40 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
55782901d0
Actually call gamepadshift_tick
2019-04-16 11:15:42 -07:00
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
7822d013cd
Merge pull request #1798 from ntavish/papyr
...
Add support for Electronut Labs Papyr.
2019-04-16 10:13:19 -07:00
0e03a321e4
Fully split gamepadshift from gamepad
2019-04-16 10:11:54 -07:00
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
7573da03f6
Merge pull request #1779 from dhalbert/nrf-nvm-2
...
nrf nvm: touchups to nickzoic PR #1768
2019-04-15 14:23:35 -07:00
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
7161038d6b
Turn off `displayio` because it is a satellite
2019-04-12 11:54:32 -07:00
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
2528b67e77
update samd-peripherals
2019-04-04 16:36:14 -04:00
cdd77b5972
remove CPy-specific EIC handlers from samd-peripherals
2019-04-04 16:04:11 -04:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
19278e0284
Merge pull request #1736 from nickzoic/circuitpython-nickzoic-1046-nrf-rtc-2
...
Circuitpython nickzoic 1046 nrf rtc 2
2019-04-02 17:38:24 -04:00
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
e254597c24
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-28 17:27:59 -07:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
54a41e0812
Merge branch 'master' into circuitpython-nickzoic-1046-nrf-rtc
2019-03-28 14:48:10 +11:00
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
f118aef283
copy/paste error
2019-03-27 18:19:39 -04:00
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
7bac10ab6e
Merge pull request #1700 from ITACAInnovation/master
...
uChip board support for Circuitpython environment
2019-03-25 14:05:12 -04:00
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
8543695f9d
Merge pull request #1653 from python-ugame/master
...
Add frozen stage module to ugame10 board
2019-03-19 09:42:20 -07:00
9cceea0d68
nrf: fix internal flash writes
2019-03-18 09:11:40 -04:00
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
ff7e729032
Fix custom pin in use logic for SWD
...
This should allow you to use SWD pins unless a debugger is attached.
You may have trouble connecting to SWD when CircuitPython has already
begun using them.
Fixes #1633
2019-03-14 11:11:35 -07:00
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
494a9d3825
Merge pull request #1640 from tannewt/final_displayio_changes
...
Final displayio changes before 4.0.0
2019-03-13 18:24:04 -04:00
97140e6a62
wrong arg type for PWMOut variable_frequency
2019-03-12 21:28:30 -04:00
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
3f6713abc1
Fix unix build by using safe mode stub
2019-03-12 11:56:35 -07:00
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
37e10d4a81
Be more careful when initing the board outside the VM.
2019-03-12 11:18:29 -07:00
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
cfb54f0263
Merge pull request #1638 from dhalbert/disable-SPIM3
...
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 10:57:56 -07:00
c4586c0531
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 08:31:03 -04:00
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
b7b74d1f78
update translations
2019-03-02 18:17:58 -06:00
b2520f3147
using the correct name for things is important...
2019-03-02 16:17:23 -06:00
c9eb02d9d2
shore-up inclusion
2019-03-02 10:05:32 -06:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
438eadd63a
re-add frequencyin to 'timer_handler' after upstream merge
2019-03-01 21:47:23 -06:00
a44bfc2730
Merge branch 'master' of https://github.com/adafruit/circuitpython into new_freq_in
2019-03-01 21:24:30 -06:00
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
263134dcd3
Add more guards for CIRCUITPYTHON_PEW
2019-03-01 18:50:00 +01:00
7535326d38
Merge pull request #1605 from dhalbert/pwmout-tcc-lock-ccb
...
Use TCC LUPD lock when updating CCB
2019-03-01 12:03:38 -05:00
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
f5f4932220
Clean unused include from tick.c
2019-03-01 15:09:00 +01:00
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
3c24e893e9
Fix SYNCBUSY loop typo.
2019-02-28 23:38:26 -05:00
808304e827
Use TCC LUPD lock when updating CCB
2019-02-28 19:53:35 -05:00
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
0a5c1c9402
Some cleanup
2019-02-28 23:34:03 +01:00
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
88e40193ae
Add a _pew module
2019-02-28 23:32:58 +01:00
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
4d47ce5c60
fixes set_timer_handler call
2019-02-27 19:28:59 -06:00
9d20380bd4
Merge branch 'master' into new_freq_in
2019-02-26 04:29:16 +00:00
4a9f05a44f
final re-glue; compiles now.
2019-02-25 21:22:52 -06:00
a8204f1bf9
touchup adding frequencyin interrupt handling
2019-02-24 18:07:55 -06:00
f602fa3d9f
fix init deps
2019-02-24 18:07:26 -06:00
e3606461c5
Merge pull request #1558 from siddacious/bmp_bitdepths
...
initial support for additional bitdepths in OnDiskBitmap
2019-02-24 13:21:54 -05:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
2437ab9605
update frequencyin interrupt handler
2019-02-22 17:19:09 -06:00
a1060747f8
Merge branch 'new_master' into new_freq_in
2019-02-22 23:12:11 +00:00
af863a3780
Merge pull request #1586 from sommersoft/shared_timer_handler
...
Move shared_timer_handler
2019-02-22 11:04:27 -08:00
a3f387274f
fix build issues
2019-02-21 20:46:42 -06:00
7a7f6638d2
update peripherals submodule
2019-02-21 18:44:51 -06:00
d218069f03
Merge pull request #1584 from tannewt/disable_concurrent_write_protection
...
Add option to disable the concurrent write protection
2019-02-21 17:15:50 -05:00
ed1ace09e9
Fix unix build by using filesystem stub
2019-02-21 13:23:28 -08:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
55e7c5a41b
handle 'set_timer_handler' on this side, vs samd-periphs.
2019-02-19 20:18:21 -06:00
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00
339a22752b
Remove rtc from pirkey_m0 to make TRANSLATION=fr fit
2019-02-18 09:02:26 -05:00
97aeb1953b
correct weak module links; samd module only in m4 ports; update libraries
2019-02-17 23:48:08 -05:00
5ec92415b0
fix module weak links; add missing nrf features
2019-02-17 17:29:28 -05:00
dafc370d22
moves 'shared_timer_handler' back to atmel-samd from samd-peripherals
2019-02-16 19:54:16 -06:00
ea9200a042
starting again; initial addition of 'frequencyio.FrequencyIn'
2019-02-16 19:26:24 -06:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
72c03268a4
remove circuitpy_rules.mk; not used
2019-02-15 19:24:34 -05:00
5a32c88db3
merge from upstream and move ure options;make translate
2019-02-15 19:19:52 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
cf545cd477
WIP: fix issues with remaining atmel-samd builds
2019-02-15 09:52:45 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
77ff17cc8d
atmel-samd: Enable extra ure functionality on Express boards
...
This enables ure.sub(), Match.span/start/end() and the
ure.Compile.search/match() pos/endpos arguments.
2019-02-14 15:42:46 +01:00
9cdffe5e8c
atmel-samd: Remove samd module from SAMD21 builds
...
Remove the samd module which has representations of the clocks.
This is done to save on precious flash.
2019-02-14 15:42:32 +01:00
f99b9ddcf1
Merge pull request #1546 from tannewt/fix_safe_mode
...
A safe mode fix and displayio fixes
2019-02-13 21:15:14 -05:00
a1a4959071
Merge pull request #1541 from dhalbert/nrf-two-uarts
...
nrf: Add second UARTE to busio.UART. Init uarts on startup.
2019-02-13 17:31:55 -08:00
d6cbd5be92
Merge pull request #1540 from TG-Techie/patch-6
...
PYPORTAL: pindefs incorrect
2019-02-13 17:21:22 -08:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
473bdf48f6
A safe mode fix and displayio fixes
...
* Fixes safe mode on the SAMD51. The "preserved" value was being
clobbered by the bootloader.
* Fixes auto-reload loop when in safe mode.
* Fixes reading Group children with [].
* Check that a TileGrid actually moves before queueing a refresh.
2019-02-13 15:31:06 -08:00
da5008f4d8
Fix atmel UART after ASF4 pruning.
2019-02-13 11:42:09 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
e901317fd7
PYPORTAL: pindefs incorrect
...
@jerryneedell suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works!
used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
board.TOUCH_YD, board.TOUCH_YU,
calibration=((5200, 59000), (5800, 57000)),
size=(320, 240))
while True:
p = ts.touch_point
if p:
time.sleep(.5)
print(p)
```
2019-02-12 22:18:36 -05:00
70f40a03cb
Rotate pyportal screen to be correct
2019-02-12 13:53:27 -08:00
b4306314aa
Move terminal font to terminalio from board.
2019-02-12 10:10:02 -08:00
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd.
2019-02-11 20:55:06 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
1a6ad20943
Get space back by using less ASF4 and combining register writes
2019-02-11 17:36:34 -08:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
844c20106b
Turn off `micropython.mem_info` on SAMD to get ~1k back
2019-02-04 18:00:18 -08:00
90e5964703
Set auto brightness on by default for boards with displays built in.
2019-02-03 13:42:03 -08:00
03068a9388
Fix built-in inits and terminal allocate
2019-02-01 01:00:10 -08:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
601a910f4e
More improvements to Terminal:
...
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
2019-01-31 11:42:14 -08:00
69bc5e189b
Rudamentary backlight support
2019-01-31 11:42:14 -08:00
1a1dbef992
Hook up the terminal based on the first display.
2019-01-31 11:42:14 -08:00
fb0970ec6e
Add terminalio
2019-01-31 11:42:13 -08:00
73cf490635
Add TileGrid
2019-01-31 11:42:13 -08:00
63d456127b
Merge pull request #1508 from adafruit/tannewt-patch-8
...
Fix up board build
2019-01-31 14:22:32 -05:00
39240516f3
Correct pin capitalization
2019-01-31 09:11:30 -08:00
323108e2ba
Merge pull request #1503 from hathach/nrf-tinyusb-sd
...
update tinyusb, work better with sd
2019-01-31 10:36:12 -05:00
3225878f63
for redboard turbo too
2019-01-30 22:55:36 -08:00
fe2a092f1c
Fix board_bus location
2019-01-30 22:54:26 -08:00
b124071e10
Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml
2019-01-30 16:13:08 -07:00
178cfc1623
Adds make config files for SparkFun LumiDrive and Redboard Turbo
2019-01-30 13:50:29 -07:00
a51f2b0716
refactor nrfx from supervisor/usb.c
2019-01-30 22:30:23 +07:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
d1fb384a4a
update tinyusb, work better with sd
2019-01-29 21:03:18 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3
...
fixed compiling error for datalore ip m4
2019-01-27 14:07:16 -08:00
de2861969b
Merge pull request #1494 from TG-Techie/patch-2
...
add displayio to TG-Techie's first board
2019-01-27 14:06:47 -08:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
dd5165c92c
Added support for SparkFun SAMD21 Dev
2019-01-25 12:27:31 -06:00
468faf4e2b
fixed compiling error
2019-01-25 12:42:43 -05:00
65dc8d0c74
Updated .travis.yml and samd README with SparkFun SAMD21 Dev pinout
2019-01-25 11:08:19 -06:00
e9538dbc7f
add displayio to TG-Techie's first board
2019-01-25 12:06:05 -05:00
d79615f96b
Revert "Updated samd readme with SparkFun SAMD21 Dev pinout"
...
This reverts commit d10fa4a8cb
2019-01-25 11:02:22 -06:00
d10fa4a8cb
Updated samd readme with SparkFun SAMD21 Dev pinout
2019-01-25 10:14:53 -06:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space.
2019-01-22 18:49:37 -08:00
0cdbc004e6
Enable displayio on all Express boards.
2019-01-22 17:59:31 -08:00
f43379c771
No pixelbuf on Hallowing
2019-01-22 14:38:34 -08:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
f46ec0253d
Merge pull request #1484 from larsks/issue/1483
...
tell people that esp8266 is no longer supported
2019-01-22 13:24:51 -08:00
3d3c50f927
tell people that esp8266 is no longer supported
...
Closes #1483
2019-01-22 15:40:00 -05:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
ae52c964c2
Cleanup display rework for PR.
...
Fixes #1465 . Fixes #1337 . Fixes #1168
2019-01-18 13:47:40 -08:00
58a2009cc1
Fix unix build
2019-01-18 12:52:27 -08:00
0318a9a9bc
More make_new fixes for unix build
2019-01-18 11:53:09 -08:00
41dad1ea1e
Fix pin defs
2019-01-18 11:43:35 -08:00
96e2c717fc
Fix build
2019-01-17 22:10:11 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
2d136d58bf
Fix other builds and hallowing
2019-01-17 14:45:29 -08:00
5277138c99
pyportal compiles and tweak blinka colors
2019-01-17 10:57:05 -08:00
84292ad890
External fourwire works and blinka splash after
2019-01-17 00:20:16 -08:00
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel.
2019-01-16 12:05:20 -08:00
076ddfd66b
Merge pull request #1474 from ladyada/master
...
more pyportal pins
2019-01-16 11:11:56 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
19b6c5c802
more pins!
2019-01-16 01:49:12 -05:00
91452ec9cb
Mention the MDK USB Dongle.
2019-01-15 21:24:36 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
c1dfee6575
Merge pull request #1466 from TG-Techie/patch-1
...
Update DLIPM4 mpconfigboard.mk
2019-01-15 18:40:46 -08:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
Dan Halbert
shazz
Elvis Pfützenreuter
Tavish Naruka
Dan Halbert
Scott Shawcroft
Scott Shawcroft
Chris Osterwood
sabas1080
ladyada
wallarug
ladyada
Carlos
ITACA Innovation S.R.L
Nick Moore
Radomir Dopieralski
siddacious
Max Holliday
Damiano Mazzella
Melissa LeBlanc-Williams
Sabas
Justin R. Cutler
John Reese
caternuson
sommersoft
Jerry Needell
Kattni
TG-Techie
Noralf Trønnes
Elias Santistevan
hathach
ShawnHymel
Lars Kellogg-Stedman
Roy Hooper
Gregory P. Smith
dsiee