djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
24,722 Commits 21 Branches 274 Tags 785 MiB
60c0271e72
Commit Graph

1784 Commits

Author SHA1 Message Date
Mark Roberts
22a7696fac Changes take 2: missed ugame10 board 2020-09-25 22:17:59 -04:00
Mark Roberts
b921543571 Requested changes take 1 2020-09-25 21:27:29 -04:00
Jeff Epler
eadb4de144 qtpy_m0_haxpress: add 2020-09-24 16:58:24 -05:00
Scott Shawcroft
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0 
fix pins for rev C
 2020-09-23 11:31:28 -07:00
lady ada
9db7625717 neopix is default on! 2020-09-23 11:19:01 -04:00
lady ada
5384479a61 fix pins for rev C 2020-09-22 23:28:23 -04:00
Jeff Epler
59580d0f2d canio: Fix implementation bugs in atmel-sam 2020-09-22 09:36:29 -05:00
Jeff Epler
4869dbdc67 canio: rename from _canio 
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
 2020-09-21 16:44:26 -05:00
Jeff Epler
9e8f1820c8 canio.CAN: switch rx/tx, make both mandatory, move declarations around 2020-09-21 16:44:26 -05:00
Jeff Epler
4e4853dcb2 common.template.ld: remove unneeded line 2020-09-21 16:44:26 -05:00
Jeff Epler
df379b84cb remove unneeded symbols 2020-09-21 16:44:26 -05:00
Jeff Epler
7fd6cab2ac canio: Make both tx and rx (but not both) optional 
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification

.. docstring & comment improvements
 2020-09-21 16:44:26 -05:00
Jeff Epler
09f8a83a75 samd: template.ld: put canram in its own output section 2020-09-21 16:44:26 -05:00
Jeff Epler
a76119afcb add _canio to Feather M4 CAN 2020-09-21 16:44:26 -05:00
Jeff Epler
67d8f108bb Add CAN to SAM E51 clock config 2020-09-21 16:44:26 -05:00
Jeff Epler
44c5b2bbb1 Respond to review comments 
Thanks @tannewt!
 2020-09-21 16:44:26 -05:00
Jeff Epler
58b920ed97 fix whitespace 2020-09-21 16:44:26 -05:00
Jeff Epler
27cbb690e5 _canio: Add listener matching 
Lightly tested:
 * no matches (catch-all)
 * standard address single address matches (even and odd positions)
 * standard address mask matches
 * only tested that extended doesn't match non-extended
 2020-09-21 16:44:26 -05:00
Jeff Epler
635fcadb59 _canio.CAN: add error handling & bus state 2020-09-21 16:44:26 -05:00
Jeff Epler
a2e1867f69 _canio: Minimal implementation for SAM E5x MCUs 
Tested & working:

 * Send standard packets
 * Receive standard packets (1 FIFO, no filter)

Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.

Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
 2020-09-21 16:44:26 -05:00
Jeff Epler
183649aad8 samd: move mcu_find_pin_function to header 
.. it'll be used in can as well as sdio
 2020-09-21 16:44:07 -05:00
Dan Halbert
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21 
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
 2020-09-19 13:41:21 -04:00
Dan Halbert
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4 
samd: SPI: improve conditional code
 2020-09-18 19:14:39 -04:00
Dan Halbert
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1 
sdioio: fix code for the case where there is no SDHC1
 2020-09-18 17:10:59 -04:00
Dan Halbert
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage 
sam e54: disable microcontroller.cpu.voltage
 2020-09-18 15:20:43 -04:00
Jeff Epler
45eec5b5a5 samd: SPI: improve conditional code 
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4.  However, the problem was in our SPI code.

A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.

Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.

Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.

Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
 2020-09-17 18:30:22 -05:00
Jeff Epler
c73182803d sdioio: fix code for the case where there is no SDHC1 
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
 2020-09-17 18:29:31 -05:00
Jeff Epler
1b29ceaf1a sam e54: disable microcontroller.cpu.voltage 
This hangs, and the usual workarounds didn't work.
 2020-09-17 18:27:43 -05:00
Scott Shawcroft
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid 
Automate USB VID/PID Uniqueness Check
 2020-09-17 11:48:46 -07:00
Brian Dean
81ee874531 pins.c: fix trailing whitespace 2020-09-16 16:40:04 -04:00
Brian Dean
847d609ddc rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately 2020-09-16 16:27:24 -04:00
Jeff Epler
1fc797132a
Merge pull request #3237 from DavePutz/issue3216 
Issue#3216 - Needed an alternate way to check if background tasks were run
 2020-09-16 08:47:33 -05:00
Scott Shawcroft
95e27bb8bf
Add more PIDs for unique boards 2020-09-15 13:43:35 -07:00
Dan Halbert
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can 
atmel-samd: add same51, feather_m4_can
 2020-09-14 23:57:51 -04:00
Jeff Epler
067a975875 update submodules to merge commits 2020-09-14 17:22:30 -05:00
DavePutz
2a2a8d6457
Merge pull request #28 from adafruit/main 
Merge from adafruit/main
 2020-09-14 16:50:40 -05:00
DavePutz
2eca4ee902
Update PulseIn.c 2020-09-14 11:04:45 -05:00
DavePutz
c014ac3089
Reworked check for input taking too long 2020-09-14 10:54:57 -05:00
Jeff Epler
af24c8ae06 Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic 
Conflict in locale/circuitpython.pot resolved with 'make translate'
 2020-09-13 14:21:21 -05:00
Jeff Epler
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode 
Add esp32s2 safe mode support & fix user_safe_mode output
 2020-09-13 14:18:59 -05:00
Jeff Epler
90f7340bfc move implicit-fallthrough warning enable to defns.mk 2020-09-13 13:13:09 -05:00
microDev
36da92075b Update safe mode reason 2020-09-13 22:57:24 +05:30
microDev
5deac8d249 Update board specific safe mode message 2020-09-13 18:22:40 +05:30
lady ada
2fac4851a5 fix typo, tested hardware, neopixel doesnt work tho 2020-09-12 19:56:13 -04:00
lady ada
6fff4ec00d cutie variant 2020-09-12 19:00:26 -04:00
Jeff Epler
01fdd9598a disable iimplicit-fallthrough warning inside asf4 
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes)  I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
 2020-09-12 17:48:42 -05:00
Jeff Epler
5729097bc4 atmel-samd: enable build error for implicit fallthrough 
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate.  I only tested a few builds (trinket m0
and metro m4 express)
 2020-09-12 15:11:29 -05:00
Jeff Epler
cacb0124ac feather_m4_express: Use quad data mode on flash 
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.

Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
 2020-09-10 20:20:21 -05:00
Scott Shawcroft
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296 
Correction for Issue #3296 - ble hanging on nrf52840
 2020-09-10 12:36:17 -07:00
Jerry Needell
2529ee2359 freeze rfm69 and bus_device libraries int feather_m0_rfm69 2020-09-09 14:54:20 -04:00
Jeff Epler
b49099c8f3 additional asf4 updates 2020-09-08 15:31:13 -05:00
Jeff Epler
e066448e36 atmel-samd: add same51, feather_m4_can 
This is compile-tested, and requires updates in the related submodules:

https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37

This should not be merged until those can also be merged.
 2020-09-08 13:06:45 -05:00
root
2690faec43 Moved checks for invalid pin to common-hal/microcontroller/Pin.c 2020-09-05 11:42:06 -05:00
Dan Halbert
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c 
fix pins for trellis_m4 board.I2C()
 2020-09-04 11:15:18 -04:00
Dan Halbert
960888a3bd fix pins for trellis_m4 board.I2C() 2020-09-03 14:22:18 -04:00
Scott Shawcroft
786f4ed114
Merge pull request #3344 from jepler/issue-3184 
Fix RGBMatrix, FrameBufferDisplay bugs
 2020-09-02 15:32:30 -07:00
Scott Shawcroft
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci 
_bleio HCI implementation
 2020-09-01 11:28:05 -07:00
Jeff Epler
952d9bbb4a samd: Ignore a maybe-uninitialized diagnostic in asf4 
I encountered this when changing optimization flags for debugging
purposes.  The diagnostic appears spurious and unrelated to what
I'm debugging.
 2020-09-01 10:55:45 -05:00
Jeff Epler
ad4bf75367 samd: only set NDEBUG for non-debug builds 2020-09-01 10:55:45 -05:00
Dan Halbert
4ac7650f22 matrix portal board 2020-08-31 23:56:38 -04:00
Dan Halbert
6dbd369272 merge from upstream 2020-08-30 14:39:03 -04:00
lady ada
81870413af add default I2C 2020-08-28 19:08:36 -04:00
Lucian Copeland
8021da08d3 Fix problematic whitespace on pulseout parameter errors 2020-08-27 11:07:47 -04:00
Scott Shawcroft
0cc438e6b9
Fix pycubed pwm use 2020-08-24 18:29:34 -07:00
root
fe0f79adce Making requested modifications 2020-08-21 20:38:19 -05:00
Scott Shawcroft
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio 2020-08-21 11:13:53 -07:00
Dan Halbert
58573a70e1 bring submodules up to date 2020-08-21 11:10:33 -04:00
Dan Halbert
f714f53552 Merge remote-tracking branch 'adafruit/main' into ble_hci 2020-08-21 10:45:05 -04:00
Dan Halbert
0e30dd8bcc merge from upstream; working; includes debug_out code for debugging via Saleae for posterity 2020-08-20 20:29:57 -04:00
Jeff Epler
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory 
Update mini sam m4 memory
 2020-08-20 19:05:39 -05:00
root
6eae7ce78f Requested changes to pulsein 2020-08-20 16:57:00 -05:00
Benjamin Shockley
135626a038
Update mpconfigboard.mk 
Added support for second type of memory chip.
 2020-08-20 13:50:52 -05:00
Scott Shawcroft
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout 
ESP32-S2: Add PulseOut and PulseIn
 2020-08-20 11:24:08 -07:00
Scott Shawcroft
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors 
Add usb-endpoint-count checking
 2020-08-20 11:21:01 -07:00
Scott Shawcroft
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family 
SAM E54: Use correct CFG_TUSB_MCU
 2020-08-20 11:13:05 -07:00
Jeff Epler
23aefe9509 Add usb-endpoint-count checking 
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value.  Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
 2020-08-19 16:47:40 -05:00
Jeff Epler
6ae5bedf3b SAM E54: Use correct CFG_TUSB_MCU 
This doesn't actually change the code that is built, but it is
"more correct".
 2020-08-19 11:27:52 -05:00
Scott Shawcroft
6857f98426
Split pulseio.PWMOut into pwmio 
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.

Fixes #3211
 2020-08-18 13:08:33 -07:00
Lucian Copeland
da75445cd5 Style changes, reposition runtime errors 2020-08-18 11:42:06 -04:00
Scott Shawcroft
d01f5dc0bd
Turn off terminalio for ja and ko 
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.

The serial output will work as usual.
 2020-08-17 17:17:59 -07:00
Brent Rubell
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x 
RFM9x -- freeze library into build
 2020-08-17 17:11:35 -04:00
Dan Halbert
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50 
The ja translation was not fitting.
 2020-08-17 10:05:25 -04:00
Lucian Copeland
0fc730bc5a Expand PulseOut API, debug cleanup 2020-08-14 16:36:02 -04:00
Dan Halbert
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size 
Squeeze firmwares to fit the new ja translation
 2020-08-13 12:19:28 -04:00
Jeff Epler
239c8ff87f metro_m0_express: put back audiobusio 
this now fits locally (though it's very close to capacity);
let's see what the CI says.

```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express  TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
 2020-08-12 19:11:33 -05:00
Scott Shawcroft
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2 
Sharp Memory Display displayio support (v2)
 2020-08-12 16:53:09 -07:00
Jeff Epler
aa0b4f7045 cpx_display: Put back AUDIOBUSIO, take away ROTARYIO 
AUDIOBUSIO is needed for the on-board mic using PDMIn
 2020-08-12 16:17:48 -05:00
Jeff Epler
ea8e9b8cef metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO 
Dan notes that this is more frequently the solution we've chosen
 2020-08-12 16:17:13 -05:00
Jeff Epler
299894025a stringcar_m0_express: make ja translation fit 2020-08-12 13:47:10 -05:00
Jeff Epler
f08ee0db20 itsybitsy_m0_express: make ja translation fit again 2020-08-12 13:44:00 -05:00
Jeff Epler
7bd42244c9 snekboard: make ja translation fit 2020-08-12 13:34:36 -05:00
Jeff Epler
45f6bc1f3e serpente: make ja translation fit 2020-08-12 13:32:08 -05:00
Jeff Epler
36bfbaae69 feather_radiofruit_zigbee: make ja translation fit 2020-08-12 13:28:30 -05:00
Jeff Epler
58a1361d3e Merge remote-tracking branch 'origin/main' into ja-firmware-size 2020-08-12 13:26:12 -05:00
Jeff Epler
813dcd1b73 trinket_m0_haxpress: make ja translation fit 2020-08-12 12:44:17 -05:00
Jeff Epler
88f222f1a1 metro_m0_express: make ja translation fit 2020-08-12 12:38:17 -05:00
Jeff Epler
ba91023fff itsybitsy_m0_express: make ja translation fit 2020-08-12 12:35:29 -05:00
Jeff Epler
6b9f7c9047 hallowing_m0_express: make ja translation fit 2020-08-12 12:29:30 -05:00
Jeff Epler
58afda342d feather_m0_supersized: make ja translation fit 2020-08-12 11:53:34 -05:00
Jeff Epler
27c2eb1869 feather_m0_express: make ja translation fit 2020-08-12 11:51:56 -05:00
Jeff Epler
8865e4ca97 circuitplayground_express_displayio: make ja translation fit 2020-08-12 11:46:52 -05:00
Jeff Epler
f3748fe20d circuitbrains_basic_m0: Use optimization flags to let ja translation fit 2020-08-12 11:46:31 -05:00
Jeff Epler
f9d1d9d114 atmel-samd: disable FRAMEBUFFERIO on samd21 
.. this disables SHARPMEMORY as well.
 2020-08-12 11:15:34 -05:00
Jeff Epler
454e616d13 atmel-samd: disable FRAMEBUFFERIO on samd21 
.. this disables SHARPMEMORY as well.
 2020-08-12 10:46:56 -05:00
bleeptrack
49407b6c06 trailing spaces fix 2020-08-12 13:42:45 +02:00
bleeptrack
e34fac6645
Whitespace and Newline fix 2020-08-11 23:59:32 +02:00
bleeptrack
228d9b5a12
Fixing indentation 2020-08-11 22:18:15 +02:00
bleeptrack
22ae1dbac8
Removing unnecessary pin ignored 2020-08-11 22:17:17 +02:00
bleeptrack
00676ff5a9
PicoPlanet 2020-08-11 21:49:52 +02:00
Jeff Epler
1cf3762392 Merge remote-tracking branch 'origin/main' into stm32-sdioio 2020-08-10 12:54:12 -05:00
Jerry Needell
1d980d527e Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x 2020-08-07 12:48:41 -04:00
Jerry Needell
f7961b96a9 update comment 2020-08-06 10:05:18 -04:00
Jerry Needell
c42ffb8f3d remove usb_hid 2020-08-06 05:44:26 -04:00
Jerry Needell
432f43a472 freeze rfm9x and BusDevice, remove many built-in modules 2020-08-05 11:37:57 -04:00
root
c7b6e66426 Fixes for pulsein tick handling 2020-08-05 10:03:20 -05:00
Jeff Epler
93b373d617 "pop from empty %q" 
Saves 12 bytes code on trinket m0
 2020-08-04 18:42:09 -05:00
Dan Halbert
ac95106b88 service discovery works; need to work on char and descriptor discovery 2020-08-04 18:24:37 -04:00
Jeff Epler
c849b781c0 Combine 'index out of range' messages 2020-08-04 14:45:45 -05:00
Jeff Epler
dddd25a776 Combine similar strings to reduce size of translations 
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used.  The net savings on trinket_m0 is
just 32 bytes.

It also means that the translation will include the original English
text, and cannot be translated.  These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
 2020-08-04 13:34:29 -05:00
Jeff Epler
0e2d231445 Merge remote-tracking branch 'origin/main' into stm32-sdioio 2020-08-03 21:01:53 -05:00
Dan Halbert
a995a5c58f wip: partial discovery responses; compiles; not tested 2020-08-03 21:02:57 -04:00
DavePutz
d7eedc5e38
Merge pull request #20 from adafruit/main 
Update from main
 2020-08-03 13:14:01 -05:00
root
9203a77804 Turn off interrupts while in handler 2020-08-03 11:31:12 -05:00
Dan Halbert
0a60aee3e4 wip: compiles 2020-08-02 11:36:38 -04:00
root
12b81618a3 Changes for getting supervisor ticks 2020-08-01 13:27:02 -05:00
Dan Halbert
1771858f4a add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes 2020-08-01 13:20:46 -04:00
Dan Halbert
4b71831d8b
SUPEROPT_VM = 0 for de_DE 2020-08-01 12:36:20 -04:00
Jeff Epler
27c6ffb9a2 atmel-samd: gemma, trinket: Make space for de_DE translation 2020-07-30 11:29:47 -05:00
Jeff Epler
d69f081c04 Merge remote-tracking branch 'origin/main' into blm_badge 2020-07-30 07:24:48 -05:00
Jeff Epler
af135a7560 atmel-samd: move samd-specific script 2020-07-30 07:18:02 -05:00
Joey Castillo
8acec2ca35 add descriptive pin names 2020-07-29 13:49:08 -04:00
Joey Castillo
ea9bc9b4b6 set screen orientation to portrait 2020-07-29 13:46:10 -04:00
Dan Halbert
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins 
fluff_m0: add pin aliases
 2020-07-28 15:15:15 -04:00
Dan Halbert
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals 
Use samd peripherals fixed for gcc 10
 2020-07-28 15:14:20 -04:00
Scott Shawcroft
b30d89131b
Merge pull request #3215 from ansonhe97/main 
Added display QSTR to Wio Terminal
 2020-07-28 11:53:17 -07:00
Dan Halbert
aa97ea2501 Merge remote-tracking branch 'adafruit/main' into blm_badge 2020-07-28 14:15:02 -04:00
Scott Shawcroft
92216d6417
Use samd peripherals fixed for gcc 10 2020-07-28 11:14:25 -07:00
Dan Halbert
e5e132a364 add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT 2020-07-28 11:49:54 -04:00
ansonhe97
e15bcebb6e Added display QSTR to Wio Terminal 2020-07-28 17:31:17 +08:00
Jerry Needell
945736e9bb add adjustments for crickit and displayio variants of CPX 2020-07-27 22:13:04 -04:00
Jerry Needell
2bdd62220e adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice 2020-07-27 21:50:36 -04:00
Scott Shawcroft
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2 
ndgGarage ndbit6 v2
 2020-07-27 15:51:23 -07:00
Scott Shawcroft
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations 
More type hints
 2020-07-27 14:26:54 -07:00
Taku Fukada
d356581651 Fix several type hints 2020-07-27 18:05:13 +09:00
Radomir Dopieralski
b2c4b0bcfa fluff_m0: don't exclude portb pins explicitly 2020-07-26 17:26:32 +02:00
Radomir Dopieralski
b1b253c012 fluff_m0: add pin aliases 
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.

Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
 2020-07-26 13:39:42 +02:00
Dan Halbert
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test 
Changes to allow different compiler optimizations per board
 2020-07-25 17:03:10 -04:00
Dan Halbert
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2 
Add GamePad to Commander board
 2020-07-25 16:57:58 -04:00
Chris Burton
c4a5297ee2 Add GamePad to Commander 2020-07-25 17:53:27 +00:00
ikigaisense
6696915801 fix-ndbit6-for-ndbit6_v2 2020-07-25 10:07:33 -06:00
root
c4817968ee Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test 2020-07-24 23:28:41 -05:00
DavePutz
3dfed3c4aa
Merge pull request #15 from adafruit/main 
update from main
 2020-07-24 20:29:53 -05:00
root
739981b34e update for pewpew 2020-07-24 17:27:25 -05:00
DavePutz
a14101cd13
Use current mpconfigboard.mk with optimization change 2020-07-24 14:09:09 -05:00
root
b9cdf195e2 board mk file changes 2020-07-24 10:00:42 -05:00
Taku Fukada
54a342a7f5 Add and correct some type hints 2020-07-24 18:20:03 +09:00
root
c937fa1760 fix formatting 2020-07-23 19:29:57 -05:00
root
778e8bfda9 Changes to optimization option 2020-07-23 19:27:02 -05:00
ikigaisense
703fb9d4a1 update-ndGarage_ndbit6_v2 2020-07-23 16:08:30 -06:00
Scott Shawcroft
2bd6d05663
Add externs. GCC10 complains about duplicate defines 2020-07-22 16:26:46 -07:00
root
d83a4ac72d Changes to add compiler optimization option 2020-07-22 12:44:41 -05:00
DavePutz
39e01c3938
Merge pull request #14 from adafruit/main 
update from main
 2020-07-22 11:30:49 -05:00
Scott Shawcroft
8ff2846bb2
Disable countio on circuitbrains basic 2020-07-21 16:21:49 -07:00
Scott Shawcroft
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack 
Enable PYSTACK to keep function state out of the heap
 2020-07-21 13:38:52 -07:00
Scott Shawcroft
5e3a853db4
Turn off GC opt on uchip board 2020-07-21 12:51:59 -07:00
Scott Shawcroft
678faff464
Be more aggressive with uChip build 2020-07-21 11:02:23 -07:00
root
49decf90c9 Add option for higher optimization levels 2020-07-21 10:11:08 -05:00
Scott Shawcroft
0c6935e336
Merge branch 'main' into disable_network 2020-07-20 16:28:22 -07:00
Scott Shawcroft
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc 
Add _bhb user module for Big Honking Button
 2020-07-20 16:24:36 -07:00
Thea Flowers
7ba89f5330 Add _bhb user module for Big Honking Button 
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
 2020-07-18 22:45:08 -07:00
Radomir Dopieralski
11ef43b071 pewpew_m4: Disable USB_HID back 
German translation fails to build, so I have to disabled USB_HID after
all.
 2020-07-18 20:09:30 +02:00
Radomir Dopieralski
8d692f33a8 pewpew_m4: Enable analogio and usb_hid 
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.

If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
 2020-07-18 19:30:40 +02:00
Scott Shawcroft
610e0171aa
Disable existing native networking. 
We're moving towards a co-processor model and a Wiznet library is
already available.

New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
 2020-07-17 17:43:02 -07:00
Jeff Epler
6912d31560 uchip: reclaim some flash space 2020-07-17 14:32:05 -05:00
Jeff Epler
1df48176ce supervisor: factor supervisor_background_tasks from sundry ports 2020-07-15 11:49:44 -05:00
Jeff Epler
6160d11c5a supervisor: factor out, Handle USB via background callback 2020-07-15 11:49:44 -05:00
Jeff Epler
742aa740f6 samd: audio: Move to background callback 
Testing performed: Played half of the Bartlebeats album :) :)
 2020-07-15 09:26:47 -05:00
Scott Shawcroft
51c888d4be
Merge pull request #3003 from Flameeyes/master 
License tagging according to REUSE specifications.
 2020-07-13 16:28:49 -07:00
Dan Halbert
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level 
SAMD: make the brownout detection level configurable per board
 2020-07-13 16:26:11 -04:00
Dan Halbert
f6869c69c5 wip: advertising; not tested 2020-07-12 19:45:23 -04:00
Radomir Dopieralski
742f9cfdb0 Fluff M0: additional pins on version 1.3 of the board 2020-07-10 20:40:58 +02:00
Radomir Dopieralski
e0733d153e SAMD: configurable brownout, separate the variables 2020-07-09 12:17:07 +02:00
Radomir Dopieralski
83a27edd20 SAMD: make the brownout detection level configurable per board 
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.

In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
 2020-07-08 19:59:53 +02:00
Scott Shawcroft
965a4961ce
Merge pull request #3120 from DavePutz/issue#3049 
Issue#3049 -PulseIn not working in CP5.4
 2020-07-07 08:59:22 -07:00
DavePutz
0932b64ae7
Correct for SAMD51 build 2020-07-06 23:25:33 -05:00
DavePutz
1b3cb17abd
Corrected file for SAMD51 build 2020-07-06 21:47:11 -05:00
DavePutz
ab4a453006
Made requested changes 2020-07-06 21:40:38 -05:00
Scott Shawcroft
846f01b2c8
Merge pull request #3113 from ansonhe97/main 
ADD: Added Wio Terminal's functional pins and LCD driver to board init
 2020-07-06 14:50:47 -07:00
Diego Elio Pettenò
34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Radomir Dopieralski
2f80460a2f Fluff M0: additional pins on version 1.3 of the board 2020-07-06 19:15:41 +01:00
DavePutz
ac33c3fe2c
Implementation of continuous synchronization of RTC during pulsein 
Flags and code to implement continuous synchronization of RTC during pulsein
 2020-07-04 21:17:19 -05:00
DavePutz
94d90742dd
Implementation of RTC continuous synchronization during pulsein 
Flags and code to implement RTC continuous synchronization during pulsein
 2020-07-04 21:15:38 -05:00
ndgarage
e514782cc6 update-with-new-usb-PID 2020-07-04 10:39:21 -06:00
ansonhe97
36ef3476de Fix depreciate terminology 2020-07-04 11:21:58 +08:00
ansonhe97
2ecb46f192 Fix CI 2020-07-03 13:42:27 +08:00
ansonhe97
2a92cf8d8b ADD: Added LCD driver to board init 2020-07-03 12:44:20 +08:00
ansonhe97
49aacc8596 ADD: Fixed wrong SPI pins and added more functional pins 2020-07-03 12:43:21 +08:00
Scott Shawcroft
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0 
Fluff M0: additional pins on version 1.3 of the board
 2020-07-02 15:43:32 -07:00
Radomir Dopieralski
fce35c3481 Fluff M0: additional pins on version 1.3 of the board 2020-07-02 22:57:58 +02:00
Jeff Epler
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio 
Add busio support for the ESP32-S2
 2020-07-01 21:02:08 -05:00
ndgarage
0537f4e775 restore-ndgarage_ndbit6-to-original 2020-07-01 14:12:52 -06:00
ndgarage
c759c9a2aa add-ndgarage_ndbit6_v2-update 2020-07-01 13:58:07 -06:00
svgops
b80dbb4b2c add-ndgarage_ndbit6_v2 2020-07-01 12:06:59 -06:00
ansonhe97
d4e28dd233 ADD: added more special pins on Wio Terminal 2020-07-01 17:06:26 +08:00
Dan Halbert
11cb3e3b4b hci skeleton done; not working yet 2020-06-30 23:19:40 -04:00
Scott Shawcroft
74ad5e80ce
Merge pull request #3089 from ansonhe97/main 
Add: added Seeed's Wio Terminal Board Support
 2020-06-30 10:58:24 -07:00
ansonhe97
4613f80d7a Fix end of line 2020-06-29 17:41:48 +08:00
ansonhe97
0dd17f4418 Add: Added Seeed Wio Terminal board support 2020-06-29 16:22:41 +08:00
Jeff Epler
c5db97c50f atmel-sam: sdio: disable debug prints by default 2020-06-26 13:16:16 -05:00
Jeff Epler
f496c0b58d atmel-samd: Add SDIO SD card interface 2020-06-26 11:50:42 -05:00
Jeff Epler
d4b9458512 samd: sdio: Add needed files from atmel start 2020-06-26 11:50:41 -05:00
Jeff Epler
57fde2e07b sdcardio: implement new library for SD card I/O 
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot

This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
 2020-06-26 11:50:23 -05:00
Dan Halbert
3e616ccead update submodules 2020-06-26 12:21:57 -04:00
Dan Halbert
759929c24a hci early wip; refactor supervisor bluetooth.c for nrf: tested 2020-06-25 20:57:17 -04:00
Jeff Epler
1d2cc0b968 I2CPeripheral: Rename class and its module 
This is an incompatible change.
 2020-06-25 11:44:19 -05:00
Jeff Epler
076a96ccc6
Merge pull request #3046 from jepler/same51 
Add basic SAM E54  support and SAM E54 Xplained board
 2020-06-25 06:55:27 -05:00
Scott Shawcroft
c5fa9730a8
Compiles! 2020-06-24 12:47:59 -07:00
Scott Shawcroft
a26102607e
Add UART support 2020-06-24 12:47:58 -07:00
Jeff Epler
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices 
Compute USB_DEVICES instead of requiring it to be specified
 2020-06-24 13:31:56 -05:00
Jeff Epler
f232aef786 supervisor.mk: Compute USB_DEVICES; remove from boards and ports 
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
 2020-06-23 12:59:01 -05:00
Jeff Epler
38659b566c atmel-samd: Finish disabling USB MIDI and/or HID on certain boards 2020-06-23 10:56:27 -05:00
Jeff Epler
d5074220a8 atmel-samd: Add SAM E54 Xplained board 
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
 2020-06-23 10:41:48 -05:00
Jeff Epler
da733c01da atmel-samd: Add support for SAM E54 family MCUs 
This introduces the new macro SAM_D5X_E5X.  This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
 2020-06-23 10:41:48 -05:00
Scott Shawcroft
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board 
PID request for a new board configuration
 2020-06-22 15:09:42 -07:00
Scott Shawcroft
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay 
delay 1ms on SAMD51 when reading processor voltage
 2020-06-22 14:29:43 -07:00
Jeff Epler
d43449a6d6 sparkfun samd51 thing plus: Fix board.I2C() 
This had the SDA and SCL pins transposed, so nothing worked.
 2020-06-22 10:45:27 -05:00
Jeff Epler
a770b5a919 never_reset_pin: Move pin validity check before first use of pin number 2020-06-22 10:45:27 -05:00
Jeff Epler
6638bc32c3 samd: Makefile: Regularize whitespace 2020-06-22 10:45:27 -05:00
Jeff Epler
a580f0f1c4 _pew: move to common-hal 
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10).  Move it.

There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
 2020-06-22 10:45:27 -05:00
Dan Halbert
1687c8b1e3 delay 1ms on SAMD51 when reading processor voltage 2020-06-19 15:25:04 -04:00
Florin Trutiu
b316549590 Added the new assigned VID/PID pair 2020-06-19 19:26:29 +03:00
Florin Trutiu
178be2e3c9 loc_ber_m4_base_board 2020-06-19 18:56:20 +03:00
Jeff Epler
3c3cad5ae6 docs: Improve 5.0.x <-> main branch doc linkrot 
This improves, but does not entirely fix, the broken links that result
from the autoapi change.  It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
 2020-06-14 11:12:35 -05:00
Diego Elio Pettenò
dd5d7c86d2 Fix up end of file and trailing whitespace. 
This can be enforced by pre-commit, but correct it separately to make it easier to review.
 2020-06-03 10:56:35 +01:00
Scott Shawcroft
796373b8be
A number of small ESP32S2 fixes: 
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
 2020-05-28 15:43:55 -07:00
Dan Halbert
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio 
Finish digitalio and pin use tracking for ESP32S2
 2020-05-26 19:18:45 -04:00
Scott Shawcroft
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi 
fix racing issue for SAMD when executing WFI
 2020-05-26 14:54:24 -07:00
Scott Shawcroft
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894 
Add an increment to tcc_refcount to allow deinit to work correctly
 2020-05-26 14:39:59 -07:00
Scott Shawcroft
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0 
Add support for Fluff M0
 2020-05-26 13:18:55 -07:00
Scott Shawcroft
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio 2020-05-26 13:09:57 -07:00
Radomir Dopieralski
4974c933b1 Fix swapped SCK and MISO in Fluff M0 2020-05-26 03:29:05 +02:00
hathach
e79340601f fix racing issue for SAMD when executing WFI 2020-05-25 20:51:02 +07:00
Jeff Epler
5cffd7e88d trinket_m0_haxpress: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
eb85304d04 escornabot: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
03866c0598 meowmeow: disable modules to make build fit with upcoming translations 2020-05-23 20:41:25 -05:00
Jeff Epler
2ed40075a5 pyruler: disable RTC to make build fit with upcoming translations 2020-05-23 20:36:33 -05:00
Radomir Dopieralski
4c01ddcbab Add support for Fluff M0 2020-05-22 18:51:12 +02:00
DavePutz
2e05f628f0
Add an increment to tcc_refcount to allow deinits to work properly 2020-05-21 11:08:26 -05:00
Scott Shawcroft
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio 2020-05-21 08:52:39 -07:00
jason
4f54514be4 Initial version 2020-05-20 21:11:06 -05:00
Scott Shawcroft
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio 2020-05-20 10:48:27 -07:00
Scott Shawcroft
fd0420d432
Update digitalio api for other ports 2020-05-20 09:23:42 -07:00
Scott Shawcroft
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2 
Add initial ESP32S2 support
 2020-05-19 12:53:23 -07:00
Scott Shawcroft
acf4b1bede
Remove reverse methods from per-board defs 2020-05-19 11:43:57 -07:00
Scott Shawcroft
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins 2020-05-19 10:55:02 -07:00
Scott Shawcroft
2c2b53303d
Merge pull request #2837 from k0d/serial-debug 
Add support for a debug console, such as ST-Link VCP.
 2020-05-18 18:13:31 -07:00
Mark Olsson
007c92ee6a Enable showing the console on a debug uart 2020-05-19 02:02:52 +02:00
Scott Shawcroft
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2 2020-05-18 16:46:41 -07:00
Scott Shawcroft
9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode 
Add bytearray.decode() for CPython compatibility
 2020-05-18 14:38:45 -07:00
Dan Halbert
e175a64036
disable rotaryio in CPX crickit 2020-05-15 20:35:12 -04:00
Scott Shawcroft
8edb8e87c8
Turn reverse methods off for trinket haxpress 2020-05-15 17:22:22 -07:00
Scott Shawcroft
86f865afe0
Turn reverse methods off for cpx_crickit 2020-05-15 16:42:22 -07:00
Scott Shawcroft
6aaab005c5
Initial ESP32S2 port. 
Basic blinky works but doesn't check pins.
 2020-05-15 15:36:16 -07:00
Dan Halbert
a3ca9401b4
Shrink crickit build 2020-05-15 18:29:37 -04:00
Scott Shawcroft
0d8bca92e2
Merge pull request #2810 from dherrada/master 
Pyi integration
 2020-05-15 10:31:05 -07:00
Scott Shawcroft
db4dbe0752
Merge pull request #2889 from jepler/gamepad-tick 
Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick
 2020-05-13 11:53:23 -07:00
Jeff Epler
adef45403b samd: audio dma: enable/disable supervisor tick as needed 2020-05-13 10:29:36 -05:00
Scott Shawcroft
7546d47f77
Merge remote-tracking branch 'adafruit/master' into improve_verification 2020-05-13 08:23:55 -07:00
Scott Shawcroft
80129c5a21
Disable countio on trinket haxpress 2020-05-12 18:55:49 -07:00
Scott Shawcroft
cde6651721
Merge remote-tracking branch 'adafruit/master' into improve_verification 2020-05-12 18:23:59 -07:00
Scott Shawcroft
277e8d528b
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 18:22:57 -07:00
Scott Shawcroft
4e8de3c554
Swap sphinx to autoapi and the inline stubs 2020-05-12 17:28:24 -07:00
warriorofwire
5a80f5e606 nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size 2020-05-12 15:23:00 -07:00
Scott Shawcroft
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio 2020-05-12 12:29:05 -07:00
Scott Shawcroft
bc40034a08
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 12:12:51 -07:00
Scott Shawcroft
f7303e6bd0
Merge pull request #2754 from maholli/non-standard-nvm 
Add non-standard nvm to QSPI for external flash support
 2020-05-12 11:56:33 -07:00
Daniel Pollard
62bdfb74e3 removed lib from catwan_usbstick - updated transalations overflowed 2020-05-12 16:40:23 +10:00
Daniel Pollard
5e5461e77e removed countio from catwan_usbstick build 2020-05-12 16:32:35 +10:00
Daniel Pollard
ee2cb703c8 merged master 2020-05-12 14:41:28 +10:00
Scott Shawcroft
55f78bfb70
Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol 
ujson: work with mp stream protocol for fast & easy read
 2020-05-11 15:40:27 -07:00
DavePutz
407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset() 
Added an #if CIRCUITPY_RTC check  for platforms supporting RTC
 2020-05-11 12:03:44 -05:00
DavePutz
2ddfab315c
Added call to rtc_reset() in rtc_init() 
Fix for issue #2872. The rtc_time_source had not been initialized; causing a time.time() call to fail.
 2020-05-11 11:31:18 -05:00
warriorofwire
eb3d5fa453 ujson: do not eat trailing whitespace 
Ujson should only worry about whitespace before JSON.  This becomes apparent when you are using MP stream protocol to read directly from input buffers.

When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout.

Fixes:
- Waiting for a timeout after you have completed reading a correct and complete JSON off the input.
- Raising an OSError after reading a correct and complete JSON off the input.
- Eating more data than semantically owned off the input buffer.
- Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object.

Code you would write before:
```
line = board_busio_uart_port.read_line()
json_dict = json.loads(line)
```
or reaching for fixed buffers and swapping them around in Python.

Code that did not work before that does now:
```
json_dict = json.load(board_busio_uart_port)
```

- This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs.
- It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA.
- It simplifies code that users write while improving their apps.
 2020-05-10 20:45:42 -07:00
warriorofwire
206d0e598a Add vectorio: for drawing shapes 
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
 2020-05-09 15:38:22 -07:00
Dan Halbert
8d00d99ca0
Shrink hallowing_m0_express to fit ko build 2020-05-08 22:51:21 -04:00
Daniel Pollard
7f1be814c8 changed build variables as per advice 2020-05-06 09:04:15 +10:00
Daniel Pollard
f63ee9fb9b excluded countio from other smaller boards 2020-05-05 16:15:57 +10:00
Daniel Pollard
d5c24b99b8 hallowing m0 - exclude countio 2020-05-05 16:04:28 +10:00
Daniel Pollard
bfa5cd9c13 refactor countio based on feedback 2020-05-05 15:23:38 +10:00
Dan Halbert
602eabe668
Squeeze hallowing_m0_express build slightly 
ko build is a little too big.
 2020-05-04 17:18:53 -04:00
Dan Halbert
c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Scott Shawcroft
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power. 
Enable pixelbuf in its place because we'll need it soon.
 2020-04-29 13:57:09 -07:00
Max Holliday
b2de5a9df9 fixing my goofy gcc-arm local stuff 2020-04-28 12:24:10 -07:00
Max Holliday
6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Scott Shawcroft
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Max Holliday
86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Scott Shawcroft
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb 
Update tinyusb
 2020-04-26 20:55:36 -07:00
Lucian Copeland
bd0df9e3bc Minor redundancy fix 2020-04-23 17:43:35 -04:00
Lucian Copeland
c6c77726e7 Merge remote-tracking branch 'upstream/master' into stm32-docfix 2020-04-23 13:39:48 -04:00
Lucian Copeland
8791ca6af3 implement requested changes 2020-04-23 13:33:41 -04:00
Scott Shawcroft
dcb0e50f04
Fix USB midi and hid disable. 2020-04-21 14:15:44 -07:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power 
This isn't perfect and needs a bit more testing.
 2020-04-20 18:25:13 -07:00
Scott Shawcroft
a4d86b96fd
Merge pull request #2777 from pewpew-game/master 
Fix RGB/BGR colors in Stage
 2020-04-20 15:25:29 -07:00
Jeff Epler
5fcc6d6286 RGBMatrix: finish renaming from Protomatter 
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
 2020-04-17 18:44:07 -05:00
Jeff Epler
3d6258f63d Rename Protomatter -> RGBMatrix 
This is a quick rename, it changes the user-facing names but not the
internal names of things.
 2020-04-17 18:43:57 -05:00
Jeff Epler
a32337718d Rename _protomatter -> protomatter 
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
 2020-04-17 18:43:57 -05:00
Scott Shawcroft
7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
Radomir Dopieralski
43022d8294 Add copyrights to pewpew m4 and ugame board.c 2020-04-17 09:50:11 +02:00
Scott Shawcroft
b3552efc76
Remove accidental file 2020-04-16 11:28:01 -07:00
Radomir Dopieralski
f39ca6052e Fix RGB/BGR colors in Stage 
This makes the colors used by the stage library compatible with those
used by the displayio library.
 2020-04-15 23:41:38 +02:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler
23bced26da samd: actually disable protomatter timer 
Just setting the timer handler to NO_INTERRUPT doesn't stop the
interrupt from occurring.
 2020-04-14 18:24:58 -05:00
Jeff Epler
759fdffda5 Update ports/atmel-samd/boards/pyportal_titano/board.c 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Jeff Epler
a51d4f7a45 pycubed: add trailing newline to file 
POSIX specifies that text files end in a trailing newline
 2020-04-14 18:24:54 -05:00
Sabas
cac4fb0318
Merge branch 'master' into nfc_copy 2020-04-09 17:05:11 -05:00
sabas1080
49771b4d7f Update to v1.3 2020-04-09 14:27:51 -05:00
Scott Shawcroft
d0a25ca9ac
Tweaks based on dhalberts feedback 2020-04-08 10:49:46 -07:00
Max Holliday
181ecf4a9b fixing my goofy CROSS_COMPILE fix 2020-04-07 21:54:46 -07:00
Max Holliday
a53a26be70 missed a debug flag 2020-04-07 18:24:53 -07:00
Max Holliday
826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft
c0ba2a839f
Updates based on feedback from jepler 2020-04-06 16:03:31 -07:00
Scott Shawcroft
e99cf6e441
Rework sleep timing 
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
 2020-04-03 18:07:56 -07:00
Scott Shawcroft
46af4bdd0e
Fix SAMD21 PulseIn 2020-04-02 17:35:52 -07:00
Scott Shawcroft
77562a2acd
Update the supported ports 2020-03-31 18:27:55 -07:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Brian Dean
7cfa8e1a68 board_vina_m0:pins.c: PGM_LED is on PA28 not PA15. 2020-03-29 18:59:00 -04:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity 
Add polarity and phase to FourWire.
 2020-03-28 07:28:37 -05:00
Scott Shawcroft
798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft
e4c4a4a3de
Swap to committed dependencies 2020-03-27 14:39:59 -07:00
Scott Shawcroft
b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
Brian Dean
7fa38e8725 Update board name to bdmicro_vina_m0 to eliminate hyphens. 2020-03-27 13:37:59 -04:00
Brian Dean
14a1e5756e Merge branch 'master' of https://github.com/adafruit/circuitpython 2020-03-26 20:28:54 -04:00
Brian Dean
2ae9edcbff Add new board BDMICRO 'Vina M0'. 
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c

This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.

Has been extensively tested with CircuitPython and works well.
 2020-03-26 20:15:54 -04:00
Scott Shawcroft
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight 
Add backlight polarity flag to Display
 2020-03-26 14:00:47 -07:00
Thea Flowers
ff67571e9a Add GD25Q64C as a flash chip for Sol 2020-03-26 12:33:27 -07:00
siddacious
9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
Chris Burton
5e559be9b5 Remove Adafruit_CircuitPython_CircuitPlayground 2020-03-24 21:10:34 +00:00
Chris Burton
39a19d54c2 Add support for Commander 2020-03-22 16:23:56 +00:00
Scott Shawcroft
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button 
Add board support for Winterbloom Big Honking Button
 2020-03-18 17:37:59 -07:00
Thea Flowers
e027aaf433 Remove some build options, fix order of boards in build.yml 2020-03-18 16:49:10 -07:00
Thea Flowers
7332adfa21 Add board support for Winterbloom Big Honking Button 2020-03-18 16:29:44 -07:00
Scott Shawcroft
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab 
update ulab
 2020-03-17 15:33:08 -07:00
Scott Shawcroft
6db11cf68b
Fix up Spresense build. It doesn't sleep. 2020-03-17 14:21:45 -07:00
Scott Shawcroft
d9e68156b2
fix up SAMD21 sleep 2020-03-17 12:10:35 -07:00
Jeff Epler
d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Scott Shawcroft
76ca13b6ed
Fix SAMD51 pulsein 2020-03-13 17:21:15 -07:00
Scott Shawcroft
7100d5e485
Fix autoreload and ticks in general 2020-03-13 16:13:24 -07:00
Scott Shawcroft
df5be65423
Update FrequencyIn for new clock API. 2020-03-13 16:12:52 -07:00
Szymon Klause
c9aa50817c add UARTLogger2 board support for CircuitPython 2020-03-13 21:39:17 +01:00
Scott Shawcroft
4fba4eb133
Switch from 1k RTC input to 32k output 2020-03-13 11:16:41 -07:00
Scott Shawcroft
48b5f2a384
Initial work on SAMD 2020-03-13 11:16:41 -07:00
Dan Halbert
6363b5ad06
Merge pull request #2693 from jepler/ulab-enable 
ulab: enable on most builds
 2020-03-10 09:48:46 -04:00
Jeff Epler
03a2b2faf1 ulab: don't enable on m0 boards 2020-03-09 23:00:21 -05:00
Dan Halbert
210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Thea Flowers
409a4a9490 Disable the HID USB descriptor for Sol 
It's not used and ends up being confusing for folks.
 2020-03-04 23:22:46 -08:00
Dan Halbert
8435935429 update uses of assert_pin_free; remove redundant checks 2020-02-29 15:37:32 -05:00
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
Jeff Epler
fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
jepler
f20255813f samd51 thing plus: new port 
testing performed:
 * successfully store and retrieve a 500kB file on the flash
 * square wave output on each pin appears on o'scope
 * board.SPI(), board.SERIAL(), board.I2C() all construct
 2020-02-25 11:52:23 -06:00
Dan Halbert
dcc8abf74e
Merge pull request #2638 from fgallaire/master 
Arduino Nano 33 IoT support
 2020-02-22 00:12:06 -05:00
Florent Gallaire
96db16a7a2 Last NINA pins 2020-02-22 04:30:18 +01:00
Florent Gallaire
39ec5d0e51 Add NINA pins 2020-02-21 01:34:52 +01:00
Scott Shawcroft
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485 
Addition of RTS/CTS/RS485 capability
 2020-02-19 10:35:57 -08:00
Florent Gallaire
fba0b302ff Add Arduino Nano 33 IoT support 2020-02-19 08:56:06 +01:00
Florent Gallaire
63bcd52a5a Add Arduino Nano 33 IoT documentation 2020-02-19 08:50:27 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master 
New board: PyCubed + updates to SAM32 board
 2020-02-18 22:01:41 -05:00
Dave Marples
24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Max Holliday
2b79d8ffe9 adding PWM to board.c for external WDT 2020-02-18 14:16:54 -08:00
Max Holliday
93760042fa no current need for NVM 2020-02-16 11:43:19 -08:00
Dan Halbert
dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Max Holliday
b91c4e66cb adding Adafruit_CircuitPython_Register to frozen + updating SAM32 2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e adding new board - PyCubed 
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
 2020-02-08 15:33:25 -08:00
Scott Shawcroft
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement 
Monotonic ns improvement; time.sleep rounds to nearest msec
 2020-02-07 11:03:37 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master 
update rotation so 0 is the default, for much faster ondiskbitmaps
 2020-02-07 12:59:30 -05:00
Dan Halbert
005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert
857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Lady Ada
789e311b63 update rotation so 0 is the default, for much faster ondiskbitmaps 2020-02-06 16:28:02 -05:00
neubauek
d93d491a61 Cleaned up CircuitBrains Basic and Deluxe board definitions 2020-02-06 14:47:22 -06:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
neubauek
f3188669e4 Added CircuitBrains Basic and Deluxe Boards 2020-02-05 14:52:47 -06:00
Dan Halbert
a4ebd2f7c1 allow tuple or list for Palette color 2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert
3b95d7c16a add gamepad to specialty cpx builds; update frozen libs 2020-01-30 21:00:47 -05:00
Scott Shawcroft
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf 2020-01-30 10:59:21 -08:00
Scott Shawcroft
5d24ade5c9
Tweak error messages to reduce code size. 2020-01-29 17:32:07 -08:00
hierophect
898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland
100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Scott Shawcroft
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma 
samd: When possible, use one DMA channel for stereo AudioOut
 2020-01-27 14:15:26 -08:00
Scott Shawcroft
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev 
Refine iMX RT memory layout and add three boards
 2020-01-27 14:11:08 -08:00
Jeff Epler
c8f969feb5 samd: audio-dma: avoid memory allocations 
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations.  This was
enough to cause MemoryErrors with regularity.

By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
 2020-01-27 08:49:41 -06:00
Jeff Epler
cb6193bbc7 samd: When possible, use one DMA channel for stereo AudioOut 
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time.  This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half.  (the number of bytes transferred
remains the same, though)

In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values.  However, this is the
case that matters for stereo mp3 playback on PyGamer.

Testing performed: Listened to some tracks with good stereo separation.
 2020-01-26 15:36:24 -06:00
Dan Halbert
6f13979c9b pygamer and pybadge boards were not resetting neopixels 2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6 2020-01-23 12:32:19 -05:00
ndgarage
4675783545 change-name-to-ndgarage_ndbit6 2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc init nfc copy 2020-01-22 20:30:33 -06:00
Dan Halbert
4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8 Merge remote-tracking branch 'origin/master' into capablerobot-usbhub 2020-01-20 13:11:57 -05:00
Scott Shawcroft
1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Scott Shawcroft
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm 
nrf: Add bonding to BLE pairing support
 2020-01-15 16:11:09 -08:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed 
CircuitPython support for the Open Book
 2020-01-15 17:21:19 -05:00
dalegrover
d6e657b593 Initial commit. 2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247 add support for the Open Book 2020-01-14 16:34:46 -05:00
scs217
50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217
18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217
c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Dan Halbert
2a75196aa3 merge from adafruit/circuitpython 2020-01-13 18:15:32 -05:00
Dan Halbert
189f2d5f07 Make requiring I2C pullups be optional 2020-01-09 17:31:50 -05:00
Scott Shawcroft
a10cd8580c
Merge pull request #2445 from jepler/mp3-jeplayer-fixes 
Fixes for JEplayer
 2020-01-08 12:50:13 -08:00
Scott Shawcroft
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2 
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
 2020-01-07 12:08:59 -08:00
Radomir Dopieralski
59ded1131f Take display offsets for PewPew M4 from the bootloader config 
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
 2020-01-06 14:24:30 +01:00
Marius-450
3ad3d49959 changes only for monster m4sk 2020-01-04 12:32:49 -05:00
Dan Halbert
242d572470 wip 2020-01-03 10:24:07 -05:00
Jeff Epler
bd8650d35b samd/peripherals: take upstream update 2020-01-02 17:55:50 -06:00
Dan Halbert
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update 
Update the PewPew M4 board and circuitpython-stage
 2020-01-01 13:59:02 -05:00
Scott Shawcroft
0223589e6c
Fix default UART too 2019-12-30 11:34:51 -08:00
Scott Shawcroft
e1d026f815
Update pins.c 2019-12-30 11:33:04 -08:00
hathach
62c4028cde
sync with https://github.com/hathach/tinyusb/pull/246 
should fix slow enumeration
 2019-12-26 23:04:16 +07:00
Jeff Epler
5aa3e3eabb samd/peripherals: update 2019-12-24 09:36:19 -06:00
Radomir Dopieralski
b06057395b Update PewPew M4 
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
 2019-12-23 18:37:36 +01:00
Scott Shawcroft
f60b6481e0
Turn off gamepad on cpx crickit 2019-12-20 12:14:27 -08:00
Scott Shawcroft
b859e2b710
Remove re from CPX Displayio build to make space. 2019-12-20 11:43:56 -08:00
Jeff Epler
d31a387ace circuitplayground_express_displayio: reduce inlining to make .ko translation fit 2019-12-19 16:11:29 -06:00
ndgarage
16688180c6 add-ndbit6 2019-12-19 07:17:43 -07:00
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk 2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk 2019-12-16 12:18:16 +05:00
Dan Halbert
e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
Dan Halbert
ae64a669dd address review comments 2019-12-11 15:43:06 -05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Jeff Epler
a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Jeff Epler
1905d0746d samd: neopixel: Fix neopixels after #2297 
This adapts the "inline assembler" code from the UF2 bootloader, which
in turn is said to be adapted from the arduino neopixel library.

This requires the cache remain ON when using M0, and be turned OFF on M4
(determined by trial and error)

Testing performed on a Metro M4:
 * measured timings using o'scope and found all values within
   datasheet tolerance.
 * Drove a string of 96 neopixels without visible glitches
 * on-board neopixel worked

Testing performed on a Circuit Playground Express (M0):
 * Color wheel code works on built-in neopixels
 * Color wheel code works on 96 neopixel strip

As a bonus, this may have freed up a bit of flash on M0 targets. (2988 ->
3068 bytes free on Trinket M0)

Closes: #2297
 2019-12-07 19:19:45 -06:00
Dan Halbert
d628d2a261 atmel-samd working 2019-12-06 15:18:20 -05:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Scott Shawcroft
fce81e6868
Merge pull request #2297 from jepler/tick-refactor 
Call background tasks only once per ms
 2019-12-02 16:45:51 -08:00
Jeff Epler
002f5c0f1c samd: trinket_m0: make board fit again 2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9 2019-12-02 07:27:03 -06:00
Jeff Epler
95d9c49e43 Merge remote-tracking branch 'origin/master' into tick-refactor 2019-11-29 11:27:09 -06:00
Jeff Epler
d843156a5e samd: Consolidate small build optimization flags 
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
 2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a Squeeze pyruler zh_Latn_pinyin 2019-11-27 14:47:35 -05:00
Dan Halbert
b32a9192df make UART.write be blocking on SAMD; add timeout property 2019-11-27 13:05:29 -05:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master 
Add shIRtty board
 2019-11-26 15:23:56 -05:00