djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
26,004 Commits 21 Branches 274 Tags 785 MiB
d486284d5d
Commit Graph

1026 Commits

Author SHA1 Message Date
ndgarage
0537f4e775 restore-ndgarage_ndbit6-to-original 2020-07-01 14:12:52 -06:00
ndgarage
c759c9a2aa add-ndgarage_ndbit6_v2-update 2020-07-01 13:58:07 -06:00
svgops
b80dbb4b2c add-ndgarage_ndbit6_v2 2020-07-01 12:06:59 -06:00
ansonhe97
d4e28dd233 ADD: added more special pins on Wio Terminal 2020-07-01 17:06:26 +08:00
Scott Shawcroft
74ad5e80ce
Merge pull request #3089 from ansonhe97/main 
Add: added Seeed's Wio Terminal Board Support
 2020-06-30 10:58:24 -07:00
ansonhe97
4613f80d7a Fix end of line 2020-06-29 17:41:48 +08:00
ansonhe97
0dd17f4418 Add: Added Seeed Wio Terminal board support 2020-06-29 16:22:41 +08:00
Jeff Epler
f496c0b58d atmel-samd: Add SDIO SD card interface 2020-06-26 11:50:42 -05:00
Dan Halbert
759929c24a hci early wip; refactor supervisor bluetooth.c for nrf: tested 2020-06-25 20:57:17 -04:00
Jeff Epler
1d2cc0b968 I2CPeripheral: Rename class and its module 
This is an incompatible change.
 2020-06-25 11:44:19 -05:00
Jeff Epler
076a96ccc6
Merge pull request #3046 from jepler/same51 
Add basic SAM E54  support and SAM E54 Xplained board
 2020-06-25 06:55:27 -05:00
Jeff Epler
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices 
Compute USB_DEVICES instead of requiring it to be specified
 2020-06-24 13:31:56 -05:00
Jeff Epler
f232aef786 supervisor.mk: Compute USB_DEVICES; remove from boards and ports 
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
 2020-06-23 12:59:01 -05:00
Jeff Epler
38659b566c atmel-samd: Finish disabling USB MIDI and/or HID on certain boards 2020-06-23 10:56:27 -05:00
Jeff Epler
d5074220a8 atmel-samd: Add SAM E54 Xplained board 
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
 2020-06-23 10:41:48 -05:00
Scott Shawcroft
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board 
PID request for a new board configuration
 2020-06-22 15:09:42 -07:00
Jeff Epler
d43449a6d6 sparkfun samd51 thing plus: Fix board.I2C() 
This had the SDA and SCL pins transposed, so nothing worked.
 2020-06-22 10:45:27 -05:00
Florin Trutiu
b316549590 Added the new assigned VID/PID pair 2020-06-19 19:26:29 +03:00
Florin Trutiu
178be2e3c9 loc_ber_m4_base_board 2020-06-19 18:56:20 +03:00
Diego Elio Pettenò
dd5d7c86d2 Fix up end of file and trailing whitespace. 
This can be enforced by pre-commit, but correct it separately to make it easier to review.
 2020-06-03 10:56:35 +01:00
Scott Shawcroft
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0 
Add support for Fluff M0
 2020-05-26 13:18:55 -07:00
Radomir Dopieralski
4974c933b1 Fix swapped SCK and MISO in Fluff M0 2020-05-26 03:29:05 +02:00
Jeff Epler
5cffd7e88d trinket_m0_haxpress: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
eb85304d04 escornabot: disable RTC to make build fit with upcoming translations 2020-05-23 20:48:38 -05:00
Jeff Epler
03866c0598 meowmeow: disable modules to make build fit with upcoming translations 2020-05-23 20:41:25 -05:00
Jeff Epler
2ed40075a5 pyruler: disable RTC to make build fit with upcoming translations 2020-05-23 20:36:33 -05:00
Radomir Dopieralski
4c01ddcbab Add support for Fluff M0 2020-05-22 18:51:12 +02:00
jason
4f54514be4 Initial version 2020-05-20 21:11:06 -05:00
Scott Shawcroft
acf4b1bede
Remove reverse methods from per-board defs 2020-05-19 11:43:57 -07:00
Scott Shawcroft
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins 2020-05-19 10:55:02 -07:00
Scott Shawcroft
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2 2020-05-18 16:46:41 -07:00
Dan Halbert
e175a64036
disable rotaryio in CPX crickit 2020-05-15 20:35:12 -04:00
Scott Shawcroft
8edb8e87c8
Turn reverse methods off for trinket haxpress 2020-05-15 17:22:22 -07:00
Scott Shawcroft
86f865afe0
Turn reverse methods off for cpx_crickit 2020-05-15 16:42:22 -07:00
Dan Halbert
a3ca9401b4
Shrink crickit build 2020-05-15 18:29:37 -04:00
Scott Shawcroft
80129c5a21
Disable countio on trinket haxpress 2020-05-12 18:55:49 -07:00
Scott Shawcroft
277e8d528b
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 18:22:57 -07:00
warriorofwire
5a80f5e606 nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size 2020-05-12 15:23:00 -07:00
Scott Shawcroft
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio 2020-05-12 12:29:05 -07:00
Scott Shawcroft
bc40034a08
Merge branch 'master' into Optical-Encoder-Module 2020-05-12 12:12:51 -07:00
Daniel Pollard
62bdfb74e3 removed lib from catwan_usbstick - updated transalations overflowed 2020-05-12 16:40:23 +10:00
Daniel Pollard
5e5461e77e removed countio from catwan_usbstick build 2020-05-12 16:32:35 +10:00
Daniel Pollard
ee2cb703c8 merged master 2020-05-12 14:41:28 +10:00
warriorofwire
206d0e598a Add vectorio: for drawing shapes 
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
 2020-05-09 15:38:22 -07:00
Dan Halbert
8d00d99ca0
Shrink hallowing_m0_express to fit ko build 2020-05-08 22:51:21 -04:00
Daniel Pollard
7f1be814c8 changed build variables as per advice 2020-05-06 09:04:15 +10:00
Daniel Pollard
f63ee9fb9b excluded countio from other smaller boards 2020-05-05 16:15:57 +10:00
Daniel Pollard
d5c24b99b8 hallowing m0 - exclude countio 2020-05-05 16:04:28 +10:00
Dan Halbert
602eabe668
Squeeze hallowing_m0_express build slightly 
ko build is a little too big.
 2020-05-04 17:18:53 -04:00
Dan Halbert
c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Scott Shawcroft
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power. 
Enable pixelbuf in its place because we'll need it soon.
 2020-04-29 13:57:09 -07:00
Max Holliday
6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Scott Shawcroft
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Max Holliday
86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Lucian Copeland
c6c77726e7 Merge remote-tracking branch 'upstream/master' into stm32-docfix 2020-04-23 13:39:48 -04:00
Lucian Copeland
8791ca6af3 implement requested changes 2020-04-23 13:33:41 -04:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power 
This isn't perfect and needs a bit more testing.
 2020-04-20 18:25:13 -07:00
Scott Shawcroft
a4d86b96fd
Merge pull request #2777 from pewpew-game/master 
Fix RGB/BGR colors in Stage
 2020-04-20 15:25:29 -07:00
Jeff Epler
5fcc6d6286 RGBMatrix: finish renaming from Protomatter 
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
 2020-04-17 18:44:07 -05:00
Radomir Dopieralski
43022d8294 Add copyrights to pewpew m4 and ugame board.c 2020-04-17 09:50:11 +02:00
Radomir Dopieralski
f39ca6052e Fix RGB/BGR colors in Stage 
This makes the colors used by the stage library compatible with those
used by the displayio library.
 2020-04-15 23:41:38 +02:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler
759fdffda5 Update ports/atmel-samd/boards/pyportal_titano/board.c 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Jeff Epler
a51d4f7a45 pycubed: add trailing newline to file 
POSIX specifies that text files end in a trailing newline
 2020-04-14 18:24:54 -05:00
Sabas
cac4fb0318
Merge branch 'master' into nfc_copy 2020-04-09 17:05:11 -05:00
sabas1080
49771b4d7f Update to v1.3 2020-04-09 14:27:51 -05:00
Max Holliday
826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Brian Dean
7cfa8e1a68 board_vina_m0:pins.c: PGM_LED is on PA28 not PA15. 2020-03-29 18:59:00 -04:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity 
Add polarity and phase to FourWire.
 2020-03-28 07:28:37 -05:00
Scott Shawcroft
798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft
b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
Brian Dean
7fa38e8725 Update board name to bdmicro_vina_m0 to eliminate hyphens. 2020-03-27 13:37:59 -04:00
Brian Dean
14a1e5756e Merge branch 'master' of https://github.com/adafruit/circuitpython 2020-03-26 20:28:54 -04:00
Brian Dean
2ae9edcbff Add new board BDMICRO 'Vina M0'. 
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c

This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.

Has been extensively tested with CircuitPython and works well.
 2020-03-26 20:15:54 -04:00
Scott Shawcroft
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight 
Add backlight polarity flag to Display
 2020-03-26 14:00:47 -07:00
Thea Flowers
ff67571e9a Add GD25Q64C as a flash chip for Sol 2020-03-26 12:33:27 -07:00
siddacious
9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
Chris Burton
5e559be9b5 Remove Adafruit_CircuitPython_CircuitPlayground 2020-03-24 21:10:34 +00:00
Chris Burton
39a19d54c2 Add support for Commander 2020-03-22 16:23:56 +00:00
Scott Shawcroft
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button 
Add board support for Winterbloom Big Honking Button
 2020-03-18 17:37:59 -07:00
Thea Flowers
e027aaf433 Remove some build options, fix order of boards in build.yml 2020-03-18 16:49:10 -07:00
Thea Flowers
7332adfa21 Add board support for Winterbloom Big Honking Button 2020-03-18 16:29:44 -07:00
Scott Shawcroft
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab 
update ulab
 2020-03-17 15:33:08 -07:00
Jeff Epler
d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Szymon Klause
c9aa50817c add UARTLogger2 board support for CircuitPython 2020-03-13 21:39:17 +01:00
Dan Halbert
210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Thea Flowers
409a4a9490 Disable the HID USB descriptor for Sol 
It's not used and ends up being confusing for folks.
 2020-03-04 23:22:46 -08:00
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
Jeff Epler
fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
jepler
f20255813f samd51 thing plus: new port 
testing performed:
 * successfully store and retrieve a 500kB file on the flash
 * square wave output on each pin appears on o'scope
 * board.SPI(), board.SERIAL(), board.I2C() all construct
 2020-02-25 11:52:23 -06:00
Dan Halbert
dcc8abf74e
Merge pull request #2638 from fgallaire/master 
Arduino Nano 33 IoT support
 2020-02-22 00:12:06 -05:00
Florent Gallaire
96db16a7a2 Last NINA pins 2020-02-22 04:30:18 +01:00
Florent Gallaire
39ec5d0e51 Add NINA pins 2020-02-21 01:34:52 +01:00
Florent Gallaire
fba0b302ff Add Arduino Nano 33 IoT support 2020-02-19 08:56:06 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master 
New board: PyCubed + updates to SAM32 board
 2020-02-18 22:01:41 -05:00
Max Holliday
2b79d8ffe9 adding PWM to board.c for external WDT 2020-02-18 14:16:54 -08:00
Max Holliday
93760042fa no current need for NVM 2020-02-16 11:43:19 -08:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Max Holliday
b91c4e66cb adding Adafruit_CircuitPython_Register to frozen + updating SAM32 2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e adding new board - PyCubed 
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
 2020-02-08 15:33:25 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master 
update rotation so 0 is the default, for much faster ondiskbitmaps
 2020-02-07 12:59:30 -05:00
Lady Ada
789e311b63 update rotation so 0 is the default, for much faster ondiskbitmaps 2020-02-06 16:28:02 -05:00
neubauek
d93d491a61 Cleaned up CircuitBrains Basic and Deluxe board definitions 2020-02-06 14:47:22 -06:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
neubauek
f3188669e4 Added CircuitBrains Basic and Deluxe Boards 2020-02-05 14:52:47 -06:00
Dan Halbert
a4ebd2f7c1 allow tuple or list for Palette color 2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert
3b95d7c16a add gamepad to specialty cpx builds; update frozen libs 2020-01-30 21:00:47 -05:00
Dan Halbert
6f13979c9b pygamer and pybadge boards were not resetting neopixels 2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6 2020-01-23 12:32:19 -05:00
ndgarage
4675783545 change-name-to-ndgarage_ndbit6 2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc init nfc copy 2020-01-22 20:30:33 -06:00
Dan Halbert
4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8 Merge remote-tracking branch 'origin/master' into capablerobot-usbhub 2020-01-20 13:11:57 -05:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed 
CircuitPython support for the Open Book
 2020-01-15 17:21:19 -05:00
dalegrover
d6e657b593 Initial commit. 2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247 add support for the Open Book 2020-01-14 16:34:46 -05:00
scs217
50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217
18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217
c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Scott Shawcroft
866ac13405
Merge pull request #2450 from Marius-450/marius-display-limit-2 
CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk
 2020-01-07 12:08:59 -08:00
Radomir Dopieralski
59ded1131f Take display offsets for PewPew M4 from the bootloader config 
The PewPew M4 devices come with different displays, which require
different offsets. Since the information about offsets is saved in
the bootloader, we can take it from there.
 2020-01-06 14:24:30 +01:00
Marius-450
3ad3d49959 changes only for monster m4sk 2020-01-04 12:32:49 -05:00
Dan Halbert
32b82032a1
Merge pull request #2423 from pewpew-game/pewpew-m4-update 
Update the PewPew M4 board and circuitpython-stage
 2020-01-01 13:59:02 -05:00
Scott Shawcroft
0223589e6c
Fix default UART too 2019-12-30 11:34:51 -08:00
Scott Shawcroft
e1d026f815
Update pins.c 2019-12-30 11:33:04 -08:00
Radomir Dopieralski
b06057395b Update PewPew M4 
PewPew M4 now has the pew.py added to its frozen libraries. Some
features needed to be disabled to make room for that.
 2019-12-23 18:37:36 +01:00
Scott Shawcroft
f60b6481e0
Turn off gamepad on cpx crickit 2019-12-20 12:14:27 -08:00
Scott Shawcroft
b859e2b710
Remove re from CPX Displayio build to make space. 2019-12-20 11:43:56 -08:00
Jeff Epler
d31a387ace circuitplayground_express_displayio: reduce inlining to make .ko translation fit 2019-12-19 16:11:29 -06:00
ndgarage
16688180c6 add-ndbit6 2019-12-19 07:17:43 -07:00
Dan Halbert
81581b345c Increase CPX stack size slightly 2019-12-16 17:25:22 -05:00
KalbeAbbas
89ed64157d
Merge branch 'master' into master 2019-12-16 13:25:44 +05:00
KalbeAbbas
87dc9bee8b
Update mpconfigboard.mk 2019-12-16 12:25:51 +05:00
KalbeAbbas
6f6d6c01ab
Update mpconfigboard.mk 2019-12-16 12:18:16 +05:00
Dan Halbert
d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert
c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert
68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert
013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Jeff Epler
a08d9e6d8e audiocore: Add MP3File using Adafruit_MP3 library 2019-12-10 14:03:06 -06:00
Dan Halbert
40434d6919 wip 2019-12-05 22:45:53 -05:00
Jeff Epler
002f5c0f1c samd: trinket_m0: make board fit again 2019-12-02 08:25:48 -06:00
Jeff Epler
899202aca7
Merge branch 'master' into gcc9 2019-12-02 07:27:03 -06:00
Jeff Epler
d843156a5e samd: Consolidate small build optimization flags 
.. inline-unit-growth was the same across all boards, and the highest
max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's
worth a little work to follow the DRY principle
 2019-11-29 10:51:16 -06:00
Dan Halbert
dd6dfeb30a Squeeze pyruler zh_Latn_pinyin 2019-11-27 14:47:35 -05:00
Dan Halbert
e560b419f8
Merge pull request #2325 from sarfata/sarfata/add-shirtty-master 
Add shIRtty board
 2019-11-26 15:23:56 -05:00
Dan Halbert
97d90c6039
Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name 
Set USB_INTERFACE_NAME for winterbloom_sol
 2019-11-26 15:17:14 -05:00
Thea Flowers
e77046d49b
Set USB_INTERFACE_NAME for winterbloom_sol 2019-11-26 10:59:12 -08:00
Thomas Sarlandie
2647ea0754 fix: disable touchio to save some space 2019-11-26 19:26:18 +01:00
Scott Shawcroft
58ad38a88e
Remove DotStar from pIRkey M0 for now to free up space 
Once we use PixelBuf, the library will be much smaller.
 2019-11-26 09:31:44 -08:00
Jeff Epler
82f55dc046 atmel-samd: reduce inlining on constrained boards again 
pewpew10, pirkey_m0, and uchip all fit now.  However, pirkey_m0
now has just 76 bytes flash available.
 2019-11-26 08:50:55 -06:00
Jeff Epler
3ed6de7baf atmel-samd: reduce inlining on pyruler again 
By tweaking the optimizer flags further, this build also fits
 2019-11-26 08:50:55 -06:00
Jeff Epler
2e4a6b94e7 atmel-samd: get most constrained m0 builds to work again 
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
 2019-11-26 08:50:45 -06:00
Thomas Sarlandie
11dc572bce feature: our own PID - thanks @ladyada 2019-11-25 21:56:42 +01:00
Thomas Sarlandie
fc71ed9789 add shirtty board - hackaday supercon 2019 addon 2019-11-25 17:44:41 +01:00
Dan Halbert
13375d16f1 change mpconfigport.mk files so they can be overriden by mpconfigboard.mk 2019-11-22 15:44:51 -05:00
Dan Halbert
e18d3e0f76 Merge branch 'master' into m4-network-ps2io 2019-11-22 15:02:52 -05:00
Dan Halbert
1a62a9cb17 remove network from kicksat_sprite 2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700 turn off network in pewpew_m4 2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874 Merge remote-tracking branch 'adafruit/master' into testing-fixes 2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5 enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00
wallarug
fce7b89087 removed Robo HAT MM1 M0 board. 2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719 add-ndbit6 2019-11-19 14:52:09 -07:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description 
... to "StringCarM0Ex"
 2019-11-16 16:40:40 -08:00
KalbeAbbas
8134ceec83
Update pins.c 2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c 2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c 2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f updated 2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11 
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. 
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
 2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native decorator 
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
 2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf Add board configuration for Winterbloom Sol 2019-11-04 23:11:42 -08:00
brentru
2f04c5891f flip it around 2019-10-31 14:11:50 -04:00
brentru
ab3da3071c flip MADCTL BGR bit to reflect RGB colors 2019-10-31 10:11:47 -04:00
ladyada
d2b613134d we should use native rotation, and tweak madctl (not done yet) 2019-10-29 22:53:44 -04:00
ladyada
1e869d1334 switch to 8-bit mode - tested on hardware! 2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f wip 2019-10-28 18:15:02 -04:00
ProductDev
4cd5571203 Adds builds for sparkfun_qwiic_micro with and without flash 2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX 2019-10-17 18:02:05 +11:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder 2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs 2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions 2019-10-14 11:55:22 -07:00
Chris Osterwood
137a4f8a5d Added new flash SKU for production hardware 2019-10-07 14:50:39 -04:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production 
Robo HAT MM1 - Fixes after testing
 2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a serpente: Update PID and enable as many modules as we can fit 2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb fix spi 2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3 fixed SPI on M4 2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0 updated robohatmm1_m0 2019-09-26 20:02:09 +10:00
wallarug
39265fccf3 included a version number 2019-09-26 19:22:51 +10:00
wallarug
db9495b04b updated board name 2019-09-26 19:21:53 +10:00
wallarug
08b0f80879 updated board name 2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0 remove frozen busio library 2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682 updated pins.c 2019-09-26 19:18:50 +10:00
wallarug
70860e1352 robohatmm1 removed uart and put in correct order 2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b Added TFT pins to HalloWing M4 for code compatibility 2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
341428b4da Added SPEAKER pin to HalloWing M4 for code compatibility 2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9 Added TOUCH pins to HalloWing M4 for code compatibility 2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support 2019-09-17 10:40:07 -07:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master 
Add support for Serpente boards
 2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language 2019-09-16 11:51:46 +02:00
Kattni Rembor
c94310411b Update board def, enable touchio 2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e Add support for Serpente boards 2019-09-14 16:06:28 +02:00
Radomir Dopieralski
d50ed3b6e7 Add support for PewPew M4 board 2019-09-05 10:50:33 +02:00
Scott Shawcroft
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x 2019-08-29 14:38:16 -07:00
Scott Shawcroft
0aa5507c4c
add additional pin aliases 2019-08-29 13:41:28 -07:00
Scott Shawcroft
84839de56f
Hallowing M4 2019-08-29 10:34:46 -07:00
Scott Shawcroft
0876d5c4ad
Disable bitbangio on Itsy M0 
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
 2019-08-27 15:21:47 -07:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review 2019-08-23 15:27:21 -07:00
Scott Shawcroft
b992ca80e7
Rejigger builds to fit under 50 minute limit 2019-08-22 20:29:58 -07:00
Scott Shawcroft
72e7ffa324
More cleanup 2019-08-22 16:16:09 -07:00
Scott Shawcroft
fd8050b369
Turn off features to make room for ePaper 2019-08-22 15:19:45 -07:00
Scott Shawcroft
9993a99906
Add initial Monster M4SK build 2019-08-22 14:24:32 -07:00
Scott Shawcroft
3a98de1236
Add reset() to display busses to detect whether it works 2019-08-22 14:23:33 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out 
NOT TESTED! Just compiles

Fixes #1691
 2019-08-22 14:23:27 -07:00
Dan Halbert
7cc15e56c8 make translate 2019-08-22 15:20:23 -04:00
Dave Astels
d547d59cba Merge remote-tracking branch 'adafruit/master' into displayio_fill_area 2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263 Make room 2019-08-21 14:46:10 -04:00
Dan Halbert
e2a4c76a37 make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00
brentru
5a8846d33c remove cruft from prv board 2019-08-08 15:12:01 -04:00
brentru
f87f48ab88 adding pyportal titano board definition 2019-08-08 14:56:28 -04:00
Chris Osterwood
d5658860aa Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping. 2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e Merge branch 'master' into capablerobot-usbhub 2019-08-08 14:14:23 -04:00
brentru
1d4700cb6c add pindefs for tft and tft control 2019-08-07 18:29:20 -04:00
brentru
8f6eac98f3 add defs for pyportal titano 2019-08-07 17:10:31 -04:00
Scott Shawcroft
eee759455a
Merge pull request #2018 from keith-packard/snekboard 
Add board support for keithp.com SnekBoard
 2019-07-31 16:38:51 -07:00
Scott Shawcroft
366fdcce18
Merge pull request #2011 from tannewt/ssd1322 
Add knobs for SSD1322 and two displayio fixes.
 2019-07-30 14:15:37 -07:00
Scott Shawcroft
9dd56b1566
Merge branch 'master' into snekboard 2019-07-30 14:12:08 -07:00
wallarug
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld 2019-07-30 19:48:35 +10:00
wallarug
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file 2019-07-30 19:13:33 +10:00
Keith Packard
c6e4ddc88a boards/snekboard: Delete SPI object reference 
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:45:52 -07:00
Keith Packard
9a37c8a4b3 boards/snekboard: Add pin aliases for UART and I2C 
Allow users to use TX/RX and SDA/SCL names.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:45:06 -07:00
Keith Packard
4387ecfdfb Update snekboard PID to official value 
Snekboard has been assigned the following PIDs:

	PID 0x004D  # bootloader
	PID 0x804D  # arduino
	PID 0x804E  # circuitpython

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:15:18 -07:00
Keith Packard
326df70ac2 Fix snekboard names 
Manufacturer -- keithp.com
Product -- snekboard

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:15:18 -07:00
Keith Packard
56f710f64f Add board support for keithp.com SnekBoard 
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:14:37 -07:00
wallarug
dc1eb73ee7
Merge branch 'master' into wallarug-robohat 2019-07-29 21:53:49 +10:00
wallarug
8974c7e843
Added BUTTON to pins.c 2019-07-29 16:37:53 +10:00
wallarug
9e0bea405d
Added BUTTON to pins.c 2019-07-29 16:37:21 +10:00
wallarug
4d30efdc2a
Updated pins.c for GROVE. 2019-07-29 16:29:48 +10:00
wallarug
8838e25cb2
Update pins.c 2019-07-29 16:28:35 +10:00
sommersoft
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards 
Add check to travis to make sure new boards are built, fix #1886
 2019-07-28 22:41:59 -05:00
wallarug
0f30070d58 updated naming schema to match other boards 2019-07-27 17:44:42 +10:00
wallarug
b06fa48735 updated a few files 2019-07-27 16:59:07 +10:00
wallarug
9c57f52d1e updated pins.c for robohat 2019-07-27 16:56:03 +10:00
wallarug
24e84adc6d further robohat cleanups 2019-07-27 16:38:47 +10:00
wallarug
e2b83e2dd9 minor changes robohat d21 2019-07-27 16:36:13 +10:00
wallarug
36008de2ed added custom ld file for samd51 no crystal, ext flash 2019-07-27 16:29:30 +10:00
wallarug
eda3423e35 updated to v1.7 board (samd51) 2019-07-27 16:27:41 +10:00
Scott Shawcroft
c61c874a6d
Reduce feather_m0_supersized build size 
Make it match feather_m0_express
 2019-07-26 00:31:41 -07:00
Scott Shawcroft
a87094e01f
Turn off GC opt to save space on Trinket Haxpress 2019-07-25 22:56:46 -07:00
Scott Shawcroft
4e7de436b4
Update constructors of boards with displays 2019-07-25 22:48:11 -07:00
Scott Shawcroft
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro 2019-07-19 16:11:13 -07:00
Scott Shawcroft
b9b9ef227f
Turn off bitbanging on Hallowing to save code space. 2019-07-19 16:10:33 -07:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth. 
This also improves Palette so it stores the original RGB888 colors.

Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.

Fixes #1828. Fixes #1956
 2019-07-19 16:06:11 -07:00
Kattni Rembor
582acdaa0a Requested changes. 2019-07-09 16:12:24 -04:00
Kattni Rembor
d905958db1 Adding PyRuler to CircuitPython. 2019-07-09 16:02:39 -04:00
jandjstudios
46b7575550 Initial commit to support boards in the datum series. 2019-07-06 13:41:03 -07:00
Chris Osterwood
97e7fea517 Change pin names to be more descriptive 2019-07-04 13:23:57 -04:00
Chris Osterwood
539502c891 Remove pin reservations. Prevents used from inside of CircuitPython code 2019-07-04 13:22:36 -04:00
Radomir Dopieralski
e45eac5016 Switch the terminal font for ugame10 
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).

It might make sense to also use that font in other boards.
 2019-07-01 23:05:07 +02:00
Scott Shawcroft
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402 2019-06-27 14:06:26 -07:00
Scott Shawcroft
fe507db45f
Shrink pIRkey build down. 
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
 2019-06-26 16:49:23 -07:00
Scott Shawcroft
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced 
Add PyGamer Advance and fix Joystick pins
 2019-06-19 12:32:36 -07:00
Scott Shawcroft
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage 
Add support for PyGamer to Stage library
 2019-06-18 18:23:08 -07:00
Scott Shawcroft
352bf7eaf5
Add PyGamer Advance and fix Joystick pins 2019-06-18 12:22:20 -07:00
Radomir Dopieralski
5803245009 Add support for PyGamer to Stage library 2019-06-18 19:05:51 +02:00
Scott Shawcroft
2dddccb99e
Update board inits for new api. 2019-06-17 18:03:30 -07:00
brentru
ea2c068e11 COLMOD is 1 param, remove CASET/RASET in CircuitPython 2019-06-17 11:20:25 -04:00
brentru
207dc885a6 removed incorrect gamma code, looks better now 2019-06-14 16:34:30 -04:00
brentru
4092294e7c tft working init. sequence, still undersaturated 2019-06-14 16:17:05 -04:00
brentru
0bc74172a2 Add pybadge airlift, sans-tft 2019-06-14 14:46:19 -04:00
Scott Shawcroft
0b1f605a9b
Turn off gc opt for more M0 boards 2019-06-12 13:20:21 -07:00
Scott Shawcroft
eb21fc3e31
Add partial display update support. 
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.

Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.

This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.

Fixes #1169. Fixes #1705. Fixes #1923.
 2019-06-12 11:32:39 -07:00
Dan Halbert
ba1b36a800 Uncomment vm.c SUPEROPT (debugging typo); trim a few builds 2019-06-12 13:09:09 -04:00
Dan Halbert
1bb4fccc3b Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files 2019-06-12 11:08:22 -04:00
Dan Halbert
0b3f29780a shrink a bunch of builds to fit 2019-06-11 18:46:06 -04:00
Dan Halbert
4fc189b60c Merge latest 4.0.x fixes into master 2019-06-11 16:16:29 -04:00
shazz
9c49af0597 Added pin for SD CS 2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter
1da8d4b4da Add PS/2 support -- ps2io module 2019-06-04 18:05:46 -03:00
Dan Halbert
4e85c1ef91 Implement forced clean builds for boards so designated. 
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.

Fixes #1910.
 2019-05-24 15:32:24 -04:00
Dan Halbert
e84f3b1c6a make crickit cpx pinyin build fit 2019-05-23 21:22:50 -04:00
Dan Halbert
0199d9810b Make pinyin fit on cpx 2019-05-21 15:18:56 -04:00
Dan Halbert
008bbc944c correct USB PIDs for several boards 2019-05-16 10:54:15 -04:00
Scott Shawcroft
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub 
Added board definition for Capable Robot Programmable USB Hub
 2019-05-14 13:42:51 -07:00
Chris Osterwood
a0497553fc Fix to prevent critical pins from being reset when MCU restarts or enters REPL 2019-05-14 15:23:33 -04:00
Chris Osterwood
420dbafa9d Added board definition for Capable Robot Programmable USB Hub 2019-05-14 13:28:24 -04:00
sabas1080
9f082ba5cb Fix pin lost 2019-05-13 10:18:53 -05:00
Scott Shawcroft
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech 
Add Escornabot Makech of Electronic Cats
 2019-05-10 12:39:58 -07:00
sabas1080
d174ce8821 Update pins define 2019-05-10 13:34:02 -05:00
Scott Shawcroft
67007282c9
Tighten down inlining on the pIRkey 2019-05-10 11:19:27 -07:00
sabas1080
27ea1df710 Init escornabot 2019-05-08 15:48:17 -05:00
sabas1080
08a170388d fix VID and PID inverted 2019-05-08 10:09:49 -05:00
ladyada
ed8e6e8f45 re-add i2s (its J not G!) 2019-04-29 20:30:53 -04:00
ladyada
fa3a52bc1e similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :) 2019-04-29 20:29:48 -04:00
wallarug
aa3c28787c removed problem libraries from frozen build. 2019-04-28 00:09:13 +10:00
wallarug
b4a70daf17 updated lots 2019-04-27 22:35:12 +10:00
wallarug
cd4aaa13a3 added robohatmm1 board defs. 2019-04-25 21:13:41 +10:00
ladyada
a5697470e1 fix up pybadge for final release board (swap backlite and reset) 2019-04-23 16:43:20 -04:00
Dan Halbert
0113e0970e add Display.__init__() args for brightness and auto_brightness 2019-04-18 15:59:16 -04:00
Dan Halbert
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift 
Add GamePadShift for handling shift-register-based buttons
 2019-04-17 10:22:24 -04:00
Scott Shawcroft
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift 2019-04-16 11:23:41 -07:00
Scott Shawcroft
f58446e937
Merge branch 'master' into master 2019-04-16 10:32:38 -07:00
ITACA Innovation S.R.L
2d303213ed Add files via upload 2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L
4f5a7ffe46 Updates: VID&PID, pinout 
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
 2019-04-16 16:45:47 +02:00
Scott Shawcroft
c927e6b938
Split GamePadShift from GamePad to save space on most boards. 2019-04-15 15:40:06 -07:00
Scott Shawcroft
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage 
Enable _stage module and freeze stage library on the PyBadge
 2019-04-15 14:25:50 -07:00
Radomir Dopieralski
ade6bd8185 Enable _stage module and freeze stage library on the PyBadge 2019-04-15 14:38:02 +02:00
siddacious
5135ee52d9 Changing to support for CP32-M4 wrover 2019-04-14 19:45:44 -07:00
Radomir Dopieralski
eeef5359f9 Merge branch 'master' into gamepad-shift 2019-04-13 11:54:25 +02:00
Dan Halbert
f8473f4a39
Merge pull request #1788 from tannewt/pinyin 
Add Chinese (Pinyin) and slim down boards so it fits
 2019-04-12 20:36:59 -04:00
Scott Shawcroft
defc6dceb0
Slim down feather m0 express 2019-04-12 16:18:08 -07:00
Scott Shawcroft
796fc3f5ab
Update font location and shrink a bunch of builds 2019-04-12 15:25:48 -07:00
Scott Shawcroft
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio 
Enable displayio for the ugame10 board
 2019-04-12 13:26:51 -07:00
Scott Shawcroft
7161038d6b
Turn off displayio because it is a satellite 2019-04-12 11:54:32 -07:00
Radomir Dopieralski
0599286e32 Use never_reset in ugame10 2019-04-12 20:45:52 +02:00
Radomir Dopieralski
947662415c Disable gamepad for feather_m0_express_crickit 2019-04-12 20:43:29 +02:00
Max Holliday
41499ac315
No I2S on G19 2019-04-12 10:06:17 -07:00
Max Holliday
e85b6fb83c
adding kicksat-sprite board 
See https://github.com/RoboticExplorationLab/sprite for details
 2019-04-12 10:06:17 -07:00
Radomir Dopieralski
dabbded622 Got back to using Display object in the Stage library 2019-04-12 11:19:19 +02:00
Radomir Dopieralski
c3136f4f32 Enable displayio for uGame10 board 
Also, make the _stage library work with the fourwire bus, to re-use the
display.
 2019-04-12 01:10:57 +02:00
Radomir Dopieralski
5603d0cd38 Configure the TFT spi to 24MHz by default 
That is (slightly) out of spec for the display, but it works reliably.
 2019-04-11 15:47:26 +02:00
Scott Shawcroft
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline. 2019-04-10 14:09:14 -07:00
ladyada
894c1e9590 Rev D/E (beta) hardware! 2019-04-10 08:37:20 -04:00
Dan Halbert
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free 
Check that a never free pointer is on the heap.
 2019-04-10 08:26:37 -04:00
Scott Shawcroft
44e32506ed
Don't make Pins for those not connected on Itsy M0 2019-04-10 00:06:59 -07:00
Dan Halbert
c0c809ad4b Fix version skew for bast_pro_mini build 2019-04-09 22:52:53 -04:00
Dan Halbert
d8763debf5
shrink sparkfun_lumidrive build 2019-04-09 21:23:28 -04:00
Dan Halbert
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master 
Added Bast Pro Mini M0
 2019-04-09 20:53:05 -04:00
Scott Shawcroft
129e725599
Merge branch 'master' into master 2019-04-09 14:40:36 -07:00
Scott Shawcroft
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi. 
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
 2019-04-09 12:36:14 -07:00
Scott Shawcroft
ef23ffe584
Turn off audiobusio on Hallowing to free rom 
It is about 5kb and the pins aren't broken out for it anyway.
 2019-04-09 12:01:00 -07:00
Scott Shawcroft
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display 2019-04-08 17:15:08 -07:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Radomir Dopieralski
8323721232 Stop hard-coding SPI frequency in FourWire 
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
 2019-04-06 15:15:29 +02:00
Scott Shawcroft
7686f93ef4
Fix crash when getting board.SPI outside the VM 
If one of the default pins was already in use it would crash.

The internal API has been refined to allow us to get the value
without causing an init of the singleton.

Fixes #1753
 2019-04-05 19:06:37 -07:00
Melissa LeBlanc-Williams
36b10104d6 Adjusted inline limit to fix Hallowing PL build 2019-04-05 12:17:16 -07:00
Melissa LeBlanc-Williams
7872a33f8b Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331 2019-04-05 11:10:02 -07:00
Dan Halbert
50d72ed993 shrink sparkfun_lumidrive to make room for large translations 2019-04-05 11:23:47 -04:00
Melissa LeBlanc-Williams
af3d809980 Updated boards files with displays 2019-04-04 23:18:15 -07:00
Dan Halbert
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor 
ROTARYIO_MODULE typo; EIC interrupt handler refactor
 2019-04-04 23:53:46 -04:00
Dan Halbert
682e83a63c Turn off rotaryio on pewpew10 so de_DE will fit 2019-04-04 20:28:32 -04:00
Dan Halbert
29df5930dd #if EIC handlers; turn off rotaryio in pirkey for space reasons 2019-04-04 16:48:38 -04:00
Sabas
19c6b8aa0c
Merge branch 'master' into master 2019-04-02 23:15:56 -06:00
Dan Halbert
709de9ce9f
Merge pull request #1732 from ladyada/master 
add airlift lite - samd51j19 + 2MB QSPI
 2019-04-02 17:11:59 -04:00
Dan Halbert
10e35f30f0 shrink inline-limit to allow large Hallowing translation to fit 2019-04-01 12:18:25 -04:00
ladyada
8159272a8b remove old comment 2019-03-31 23:17:19 -04:00
ladyada
89cf60eac3 add airlift lite - samd51j19 + 2MB QSPI 2019-03-31 19:20:15 -04:00
sabas1080
bb7bb80b4a update bast pro mini m0 2019-03-30 15:28:23 -06:00
Melissa LeBlanc-Williams
8087cb41e5 Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix 2019-03-27 20:18:37 -07:00
Dan Halbert
88068876ed turn off frequencyio for all SAMD21 builds 2019-03-27 17:54:36 -04:00
Dan Halbert
df79e9a732
Merge pull request #1687 from jrcutler/master 
Enable nvm storage for all samd21x18 boards
 2019-03-27 11:10:22 -04:00
Melissa LeBlanc-Williams
f4cede4747 Removed parameter so CS is always toggled 2019-03-26 18:46:13 -07:00
Melissa LeBlanc-Williams
b2ad16f5c8 Removed parameter so CS is always toggled 2019-03-26 18:34:07 -07:00
Melissa LeBlanc-Williams
5f0e71ccb4 Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix 2019-03-26 18:23:02 -07:00
Melissa LeBlanc-Williams
0df40534f3 Merge branch 'master' of https://github.com/adafruit/circuitpython 2019-03-26 18:22:30 -07:00
ITACA Innovation S.R.L
74c5705a9a
Update mpconfigboard.mk 2019-03-25 17:19:40 +01:00
ITACA Innovation S.R.L
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c 2019-03-25 15:59:22 +01:00
ITACA Innovation S.R.L
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk 2019-03-25 15:59:00 +01:00
ITACA Innovation S.R.L
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h 2019-03-25 15:58:37 +01:00
ITACA Innovation S.R.L
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c 2019-03-25 15:57:35 +01:00
ITACA Innovation S.R.L
4886451000
Add files via upload 
This is a pull request to add support for uChip into the Circuitpython environment.

We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!


What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
 2019-03-25 13:06:31 +01:00
Melissa LeBlanc-Williams
c3329e224d Added Single Byte Boundaries option for certain displays 2019-03-24 23:59:28 -07:00
Justin R. Cutler
41f4f269f1 Disable frequencyio support for samd21-based catwan_usbstick target. 2019-03-24 14:22:23 -04:00
Justin R. Cutler
d6c7bda6d1 Enable 256b of nvm storage for all samd21x18-bootloader.ld boards. 2019-03-24 12:02:07 -04:00
Melissa LeBlanc-Williams
0c33f7fdb4 Enable CS toggle for displayio by default 2019-03-23 20:23:23 -07:00
Melissa LeBlanc-Williams
d2a0ec28a0 Fixed display init on boards with displays 2019-03-23 19:32:15 -07:00
Dan Halbert
eca23a7279 remove i2cslave from feather m0 crickit 2019-03-20 15:38:52 -04:00
Dan Halbert
fbf166af1a enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit 2019-03-20 14:36:24 -04:00
Radomir Dopieralski
a50ee4f650 Add frozen stage module to ugame10 board 
And also ignore some more pins.

This is needed for the builds on the circuitpython.org to be functional.
 2019-03-17 14:03:50 +01:00
Scott Shawcroft
e05ab64398
Squeeze down the feather crickit build 2019-03-13 17:20:18 -07:00
Scott Shawcroft
96a924f5f0
Turn off networking on M0s. 
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
 2019-03-12 17:18:30 -07:00
Scott Shawcroft
2e500a8a29
Copy inline setting on feather m0 express that the metro has. 2019-03-12 14:06:01 -07:00
Scott Shawcroft
b1c572e82e
Fixup the pybadge definition so the screen works. 2019-03-12 11:18:29 -07:00
John Reese
ef4a74e201
Add basic Pybadge board definition 
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:

```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
 with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
 2019-03-12 11:12:35 -07:00
Scott Shawcroft
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER 
add SPEAKER pin alias for PyPortal
 2019-03-11 19:16:01 -07:00
caternuson
46fc8a8a86 change order so SPEAKER is first 2019-03-11 17:45:27 -07:00
caternuson
53b7055283 add SPEAKER pin alias for PyPortal 2019-03-11 15:12:29 -07:00
Radomir Dopieralski
caf51cf4eb Add default devices and tweak brightness in boards/pewpew10 2019-03-11 19:09:21 +01:00
Dan Halbert
26ed411936 Shrink build so de_DE fits 2019-03-07 07:47:18 -05:00
sommersoft
2cd6a79016 better handle frequencyio inclusion 2019-03-01 22:46:57 -06:00
Dan Halbert
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x 
Add support for PewPew 10.x boards
 2019-03-01 14:07:32 -05:00
Radomir Dopieralski
2bfafd1fc9 Enable math for pewpew10 2019-03-01 16:55:54 +01:00
Radomir Dopieralski
5d85d54026 Move the frozen pew.py into a submodule 2019-03-01 16:24:22 +01:00
Radomir Dopieralski
89b2788d11 Apply review fixes: 
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
 2019-03-01 16:05:15 +01:00
Radomir Dopieralski
3826ca4194 Rename internal pins to add underscore in front 2019-03-01 15:10:43 +01:00
Radomir Dopieralski
18870255ea Remove the pewpew70 board definition, leave only pewpew10 2019-03-01 15:06:24 +01:00
Dan Halbert
fb027f2024 Update PyPortal pins to rev C 2019-03-01 09:06:03 -05:00
Radomir Dopieralski
45fea86554 Rebase on top of CircuitPython 4.x 2019-03-01 14:59:21 +01:00
Radomir Dopieralski
59f63eaef6 Handle new buttons 2019-02-28 23:34:03 +01:00
Radomir Dopieralski
55b511a5d8 Use a dedicated timer 2019-02-28 23:33:37 +01:00
Radomir Dopieralski
7ac11ed8e1 Enlarge the usb disk 2019-02-28 23:25:18 +01:00
Radomir Dopieralski
5a1e69f5b8 Correct a typo in the pin name 2019-02-28 23:23:26 +01:00
Radomir Dopieralski
a41ea27596 Add pewpew70 board 2019-02-28 23:23:26 +01:00
Bryan Siepert
3afcd3f5bc another/different size tweak for the DE hallowing build 2019-02-23 20:18:22 -08:00
Bryan Siepert
2cb31ea546 Merge branch 'master' into bmp_bitdepths 2019-02-23 20:16:57 -08:00
Bryan Siepert
3843e96edc Tweaking German hallowing build for size 2019-02-23 19:47:58 -08:00
ladyada
85421f9766 final pin names, tested with final release 2019-02-23 15:40:28 -05:00
Dan Halbert
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap 
Fix displaying images off of SD cards.
 2019-02-19 19:28:53 -05:00
Scott Shawcroft
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout 
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
 2019-02-19 16:14:33 -08:00
Scott Shawcroft
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation. 2019-02-19 14:51:39 -08:00
Dan Halbert
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7 
PYPORTAL:make it easier for people to hookup in spi mode
 2019-02-19 14:12:30 -05:00
Dan Halbert
9c24c804fb Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD. 2019-02-18 22:44:31 -05:00
TG-Techie
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic 2019-02-18 15:00:14 -05:00
Dan Halbert
339a22752b Remove rtc from pirkey_m0 to make TRANSLATION=fr fit 2019-02-18 09:02:26 -05:00
Dan Halbert
cf545cd477 WIP: fix issues with remaining atmel-samd builds 2019-02-15 09:52:45 -05:00
Dan Halbert
5154e0581e WIP: atmel-samd trinket build works 2019-02-15 00:28:20 -05:00
TG-Techie
e901317fd7
PYPORTAL: pindefs incorrect 
@jerryneedell  suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works! 

used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
                                      board.TOUCH_YD, board.TOUCH_YU,
                                      calibration=((5200, 59000), (5800, 57000)),
                                      size=(320, 240))

while True:
    p = ts.touch_point
    if p:
        time.sleep(.5)
        print(p)
```
 2019-02-12 22:18:36 -05:00
Scott Shawcroft
70f40a03cb
Rotate pyportal screen to be correct 2019-02-12 13:53:27 -08:00
Scott Shawcroft
b4306314aa
Move terminal font to terminalio from board. 2019-02-12 10:10:02 -08:00
Scott Shawcroft
c17f147be9
A variety of displayio improvements 
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
  a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
 2019-02-11 20:55:05 -08:00
Max Holliday
2e48739a4e standardizing on "BATTERY" pin; and load-leveling Travis 2019-02-06 10:50:57 -08:00
Max Holliday
4c1b85cdcd elaborating on include path for board_busses 2019-02-05 20:21:54 -08:00
Max Holliday
30fcb14017 correcting VID/PID and adding sam32 to travis 2019-02-05 19:20:43 -08:00
Max Holliday
a2936c4c20 adding SAM32 board 
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
 2019-02-05 17:22:34 -08:00
Scott Shawcroft
90e5964703
Set auto brightness on by default for boards with displays built in. 2019-02-03 13:42:03 -08:00
Scott Shawcroft
03068a9388
Fix built-in inits and terminal allocate 2019-02-01 01:00:10 -08:00
Scott Shawcroft
ec03887040
Fix hallowing and nrf builds 2019-01-31 11:42:15 -08:00
Scott Shawcroft
601a910f4e
More improvements to Terminal: 
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
 2019-01-31 11:42:14 -08:00
Scott Shawcroft
69bc5e189b
Rudamentary backlight support 2019-01-31 11:42:14 -08:00
Scott Shawcroft
39240516f3
Correct pin capitalization 2019-01-31 09:11:30 -08:00
Scott Shawcroft
3225878f63
for redboard turbo too 2019-01-30 22:55:36 -08:00
Scott Shawcroft
fe2a092f1c
Fix board_bus location 2019-01-30 22:54:26 -08:00
Elias Santistevan
b124071e10 Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml 2019-01-30 16:13:08 -07:00
Elias Santistevan
178cfc1623 Adds make config files for SparkFun LumiDrive and Redboard Turbo 2019-01-30 13:50:29 -07:00
Scott Shawcroft
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3 
fixed compiling error for datalore ip m4
 2019-01-27 14:07:16 -08:00
Scott Shawcroft
de2861969b
Merge pull request #1494 from TG-Techie/patch-2 
add displayio to TG-Techie's first board
 2019-01-27 14:06:47 -08:00
ShawnHymel
dd5165c92c Added support for SparkFun SAMD21 Dev 2019-01-25 12:27:31 -06:00
TG-Techie
468faf4e2b
fixed compiling error 2019-01-25 12:42:43 -05:00
TG-Techie
e9538dbc7f
add displayio to TG-Techie's first board 2019-01-25 12:06:05 -05:00
Scott Shawcroft
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space. 2019-01-22 18:49:37 -08:00
Scott Shawcroft
f43379c771
No pixelbuf on Hallowing 2019-01-22 14:38:34 -08:00
Scott Shawcroft
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD 2019-01-22 14:02:07 -08:00
Roy Hooper
50af08a6f3 Merge branch 'master' into pixelbuf 2019-01-19 16:33:59 -05:00
Scott Shawcroft
ae52c964c2
Cleanup display rework for PR. 
Fixes #1465. Fixes #1337. Fixes #1168
 2019-01-18 13:47:40 -08:00
Scott Shawcroft
41dad1ea1e
Fix pin defs 2019-01-18 11:43:35 -08:00
Scott Shawcroft
2d136d58bf
Fix other builds and hallowing 2019-01-17 14:45:29 -08:00
Scott Shawcroft
5277138c99
pyportal compiles and tweak blinka colors 2019-01-17 10:57:05 -08:00
Scott Shawcroft
84292ad890
External fourwire works and blinka splash after 2019-01-17 00:20:16 -08:00
Scott Shawcroft
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel. 2019-01-16 12:05:20 -08:00
ladyada
19b6c5c802 more pins! 2019-01-16 01:49:12 -05:00
TG-Techie
f667d4d887
Update mpconfigboard.mk 
oops, forgot to change those when i copied the folder
 2019-01-14 14:43:34 -05:00
Roy Hooper
ffe734edf7 Fresh combined checkin of _pixelbuf library. 2019-01-13 23:51:13 -05:00
TG-Techie
ef6c9e7df6 removed commented code 2019-01-12 23:19:40 -05:00
TG-Techie
309a02efa1 added datalore ip m4 to boards 2019-01-12 23:06:12 -05:00
Dan Halbert
5f9980fb6b support winbond 8MB chips on all boards that might use them 2019-01-12 13:24:35 -05:00
Scott Shawcroft
b2cec6275c
Fix screen rotation and reset pin 2019-01-11 00:10:41 -08:00
Scott Shawcroft
19db886645
Support the display on the pyportal. 
Also fix #1390, reload during sleep broken.
 2019-01-10 17:29:34 -08:00