djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
12,884 Commits 21 Branches 274 Tags 785 MiB
97140e6a62
Commit Graph

1620 Commits

Author SHA1 Message Date
Benjamin Shockley
4acca8b90b
Update board.c 2018-09-29 23:17:24 -05:00
Benjamin Shockley
13364f90fe
Create board.c 2018-09-29 23:16:07 -05:00
Dan Halbert
48a3aafdd2 reset I2C and SPI on ctrl-D 2018-09-25 15:12:10 -04:00
hathach
76d6fb03f0 more clean up 2018-09-26 02:12:06 +07:00
hathach
eba80f7a99 update translate string 2018-09-26 02:10:44 +07:00
hathach
52328c88cd remove space 2018-09-26 02:06:32 +07:00
hathach
74cc55b107 change error type to runtime 2018-09-25 17:31:53 +07:00
hathach
f724647a45 fix feather nrf52840 build error 2018-09-25 17:09:54 +07:00
hathach
dec5c50c45 clean up 2018-09-25 16:22:14 +07:00
hathach
2f0e0bdcaf migrate serial from uart to uarte 2018-09-25 16:14:44 +07:00
hathach
9017c9d29a clean up 2018-09-25 14:29:45 +07:00
hathach
d3e5ba83eb update nrfx to 1.3.0 2018-09-25 13:00:57 +07:00
hathach
d714479924 clean up 2018-09-25 12:48:48 +07:00
hathach
01c1296197 nrf52 uart io rx work reliably 2018-09-25 12:37:31 +07:00
hathach
1782ceab35 uarte malloc if buffer is not in SRAM 2018-09-24 16:18:49 +07:00
hathach
4015023e01 clean up uart io 2018-09-24 16:12:05 +07:00
hathach
7bbd449f06 uarte rx work fine 2018-09-24 15:54:32 +07:00
hathach
fdd3e91753 changing to nrf uarte, tx works fine 2018-09-24 14:56:52 +07:00
hathach
7a1b4ccc9b Merge branch 'master' into nrf52_uart_io 2018-09-24 12:50:48 +07:00
Scott Shawcroft
f2c960e89b
Merge pull request #1205 from hathach/nrf52_autoreload 
add autoreload for nrf52
 2018-09-21 16:48:21 -04:00
hathach
e1fe7e71a1 add autoreload 2018-09-22 02:08:00 +07:00
Scott Shawcroft
a9d094ab74
Fix translations 2018-09-21 12:24:04 -04:00
Scott Shawcroft
e5274959f2
Merge remote-tracking branch 'adafruit/3.x' into merge_3x 2018-09-21 12:22:26 -04:00
Dan Halbert
2c15d12f2f allow multiple I2C and SPI; improve nrfx_config.h 2018-09-20 20:45:30 -04:00
hathach
816ff05253 clean up 2018-09-21 03:53:35 +07:00
hathach
dddc437ea7 got rx working finally 2018-09-21 03:48:13 +07:00
hathach
fe1a297889 still have issue with initial uart rx 2018-09-21 01:27:52 +07:00
Dan Halbert
2309e60c0d WIP; problem with staticly allocated IRQ handlers 2018-09-19 21:59:04 -04:00
hathach
9c25306877 uart rx got some issue with irq 2018-09-20 02:12:21 +07:00
Scott Shawcroft
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master 
3.x master
 2018-09-19 09:58:52 -07:00
hathach
c5593ec074 got uart tx work 2018-09-19 17:59:15 +07:00
hathach
1df3bcf392 add board.UART() function 2018-09-19 14:40:37 +07:00
Dan Halbert
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin 
Add VOLTAGE_MONITOR pin to feather boards pins
 2018-09-18 21:47:09 -04:00
Scott Shawcroft
655f223916
Clock the SAMD21 much faster so it can actually convert at its max 
sample rate of 350ksps.

Also added an error check of sample rate.

Fixes #1196
 2018-09-18 15:29:46 -07:00
Dan Halbert
56b7f3ba64 fix translate omission; pca10059 fix in .travis.yml 2018-09-18 16:28:27 -04:00
Dan Halbert
bc510e714f merge 3.0.2 to master 2018-09-18 15:38:12 -04:00
hathach
d8c8c5f005 remove CFG_HWUART_FOR_SERIAL 2018-09-18 20:26:50 +07:00
Dan Halbert
aaa61d06e3 add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen 2018-09-17 22:22:23 -04:00
Pierrick C
53853289eb Move VOLTAGE_BATTERY line just under D9 line 2018-09-14 09:02:04 +02:00
ladyada
521a14e942 add mic in / out 2018-09-13 21:50:43 -04:00
ladyada
994c066b21 rev B (minus microphone) 2018-09-13 21:34:39 -04:00
ladyada
bec42671b1 missin' reset pin for the radio. tested works. 2018-09-13 21:30:13 -04:00
ladyada
28aabb4d5c trellis m4 variant 2018-09-13 21:30:13 -04:00
Pierrick C
7e8816ad6f Add VOLTAGE_MONITOR alias to pin D31/A7 2018-09-13 23:46:47 +02:00
Pierrick C
8eda4bb473 Add VOLTAGE_MONITOR alias for D9 pin to feather boards 2018-09-13 23:36:04 +02:00
Scott Shawcroft
2dd9407f21
Merge pull request #1186 from dhalbert/uart-enhancements 
UART enhancements
 2018-09-12 16:23:28 -07:00
Dan Halbert
6a72084198 fix nrf builds; sphinx 1.8.0 crashing: use lower version 2018-09-12 18:37:03 -04:00
Scott Shawcroft
f21cf15c38
Add OnDiskBitmap which loads pixel data straight from disk. 
Also, renamed Sprite's palette to pixel_shader so it can be
anything that produces colors based on values (including color values).
Added a ColorConverter that converts RGB888 (found in bitmaps) to
RGB565 for the display.

Fixes #1182
 2018-09-12 15:25:59 -07:00
Dan Halbert
6a046f55c4 UART fixes and enhancements; default board object fix 2018-09-12 17:19:43 -04:00
Dan Halbert
2bd7040fe0 usb_write() output_len was uint8_t instead of uint32_t 2018-09-12 17:16:52 -04:00
Paul Kierstead
02b3f62460 When UART timeout of zero is given, make read() return data already available 2018-09-12 13:25:49 -04:00
Benjamin Shockley
b923324e73
Added HW NEOPIXEL Definition 
Added definition for the built-in Neopixel.  This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
 2018-09-12 07:59:07 -05:00
Dan Halbert
c3918bae57 PWMOut was not claming channels on shared TCCs 2018-09-11 19:46:47 -04:00
Benjamin Shockley
2138b04e45
Update to IS25LP016D 
Changed .supports_qspi_write to true.
 2018-09-11 07:52:23 -05:00
Benjamin Shockley
c7cf38186d
Added IS25LP016D 2018-09-10 14:55:18 -05:00
Benjamin Shockley
08a2d962e3
Delete README.md 2018-09-10 17:01:31 +00:00
Benjamin Shockley
b2f5511de2
Initial Upload of Mini SAM M0 
Initial Upload of Mini SAM M0
 2018-09-10 17:01:00 +00:00
Benjamin Shockley
b03037e512
Create README.md 2018-09-10 16:55:55 +00:00
Dan Halbert
e335c74ac6 use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage 2018-09-09 15:01:28 -04:00
Dan Halbert
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral 
Initial Grand Central definition
 2018-09-07 15:00:13 -04:00
Scott Shawcroft
3ac03a31d8
Fix SDA/SCL 2018-09-07 10:39:18 -07:00
Scott Shawcroft
32c616b5dd
Initial Grand Central definition 
It has a ton of pins in a Mega form-factor

This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
 2018-09-06 16:54:13 -07:00
Scott Shawcroft
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing 2018-09-06 14:54:55 -07:00
Scott Shawcroft
1683eb913d
Minor tweaks based on feedback 2018-09-06 14:49:49 -07:00
Dan Halbert
100603a60b neopixel_write merge; alphabetize stuff in Makefile 2018-09-05 17:38:59 -04:00
Dan Halbert
4c3b4cacfa Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming 2018-09-05 13:15:22 -04:00
Dan Halbert
a0872e8761
Merge pull request #1161 from hathach/nrf52_neopixel 
Nrf52 neopixel
 2018-09-05 08:09:07 -04:00
hathach
ccd87a33b6 use nrf_pwm instead of direct registers 2018-09-05 13:18:36 +07:00
Dan Halbert
b5c03a7085 generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t 2018-09-04 16:43:21 -04:00
hathach
f4a98e909c fix nrf52832 build 2 2018-09-04 23:25:08 +07:00
hathach
b9e8e3cd1f fix nrf52832 build 2018-09-04 20:54:36 +07:00
hathach
1fe3ed87eb run background job while waiting for neopixel write seqend 2018-09-04 19:24:45 +07:00
hathach
0d92c65829 correct disconnection check to only dtr 2018-09-04 18:36:08 +07:00
hathach
3ae24d9f9a add neopixel_write implementation, work ok 2018-09-04 18:33:08 +07:00
hathach
e17253071e adding neopixel write 2018-09-04 15:51:49 +07:00
Paul Kierstead
2d3f1a10bf When UART timeout of zero is given, make read() return data already available 2018-09-01 17:07:30 +00:00
Dan Halbert
4382389e6f fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards 2018-09-01 00:29:36 -04:00
Dan Halbert
9ea809bef7 add pin claiming to devices 2018-08-31 18:38:05 -04:00
Dan Halbert
585597a252 pin files rework; implement pin claiming; add more boards 2018-08-31 18:05:55 -04:00
Dan Halbert
0e8d146184 wip 2018-08-31 18:05:55 -04:00
Scott Shawcroft
121903b6ee
Tweaks based on feedback 2018-08-31 14:21:48 -07:00
Scott Shawcroft
6697544cdf
Introduce displayio to render graphics to displays. 
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.

This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
 2018-08-31 12:31:52 -07:00
Dan Halbert
93100a7517
Merge pull request #1146 from hathach/nrf52_usb_serial_bug 
update tinyusb to fix #1007 serial issue
 2018-08-28 15:39:34 -04:00
hathach
87811ec3a0 update readme board name feather_nrf52832 2018-08-28 16:15:20 +07:00
Scott Shawcroft
569a050e82
Merge pull request #1143 from notro/stat_epoch_fix 
Fix os.stat() epoch and use RTC for file timestamp
 2018-08-26 22:22:45 -07:00
ladyada
ded38d30b6 rename pin.h to nrf_pin.h to avoid conflict with Pin.h 2018-08-26 20:37:12 -04:00
Noralf Trønnes
b61cf8d81f samd: Use RTC to set file timestamp 
Use RTC to set file timestamp for file operations done on the board.
 2018-08-25 20:43:09 +02:00
Jerry Needell
e8b94d0024 adjust SAMD51 neopixel_write timing 2018-08-24 07:01:50 -04:00
Dan Halbert
4cc33f8de6 Merge remote-tracking branch 'adafruit/master' into nrf_board_rename 2018-08-23 16:25:57 -04:00
Dan Halbert
728622f09d
Merge pull request #1139 from hathach/nrf52_usb_serial 
use unique DevicID for usb serial
 2018-08-23 09:30:31 -04:00
hathach
4a8cd03de1 use unique DevicID for usb serial 2018-08-23 14:00:54 +07:00
hathach
fed1960424 remove s140 6.0.0 and s132 6.1.0 (not supported yet) 2018-08-23 00:27:39 +07:00
hathach
0c0ac06fc7 add SD 6.1.0 to download all 2018-08-22 23:09:09 +07:00
hathach
7961103ee6 update SD to v6.1.0 2018-08-22 21:51:30 +07:00
Dan Halbert
05ea9fd296 remove stray underscore 2018-08-22 10:26:52 -04:00
Dan Halbert
eaf4d19dbb Merge remote-tracking branch 'adafruit/master' into nrf_board_rename 
Merge #1137
 2018-08-22 10:24:10 -04:00
hathach
a516d1123f fix typos 2018-08-22 19:42:41 +07:00
hathach
02b1b53153 Merge branch 'master' into nrf52_dfu_touch1200 2018-08-22 15:24:12 +07:00
hathach
fc955b1591 remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader 2018-08-22 15:22:17 +07:00
Dan Halbert
c503cf990b forgot to change .travis.yml 2018-08-21 20:35:58 -04:00
Dan Halbert
85df32907f rename nrf boards to feather_nrf52832 and feather_nrf52840_express 2018-08-21 18:45:37 -04:00
hathach
df4184e478 rename linker file to SD major version only 2018-08-21 16:02:57 +07:00
hathach
1c4accfa39 Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200 2018-08-21 15:17:03 +07:00
hathach
b7dd33b76e add touch 1200 for dfu-flash 2018-08-21 15:15:44 +07:00
Scott Shawcroft
182a8d7120
Merge pull request #1131 from tannewt/hallowing3 
Support Hallowing in 3.x
 2018-08-20 18:26:07 -07:00
Scott Shawcroft
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff. 2018-08-20 18:04:35 -07:00
Scott Shawcroft
44de3d49a8
Speed up zero neopixel pulses. 
SK6812 on 5v is pickier than WS2812 on 5v.

Hopefully fixes #1083.
 2018-08-20 17:04:46 -07:00
ladyada
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested! 2018-08-20 10:52:33 -07:00
Dan Halbert
1768057e87
add HalloWing 2018-08-20 10:52:24 -07:00
Noralf Trønnes
eefb6842a0 i2cslave: Fix missing translate() when raising exceptions 
The translate() changes where applied after travis had checked the
i2cslave PR so this wasn't caught.
 2018-08-18 16:00:06 +02:00
Scott Shawcroft
1a6f6ff8e4
Merge pull request #1122 from Jahor/patch-1 
Fix PWM Support on port 1 of NRF52840
 2018-08-17 16:54:03 -07:00
Scott Shawcroft
4a4d84ba42
Merge pull request #1064 from notro/i2cslave 
Add busio.I2CSlave
 2018-08-17 16:51:45 -07:00
Egor Leonenko
18e9f74738
Fix PWM Support on NRF52840 
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
 2018-08-17 19:34:03 +12:00
Scott Shawcroft
e8cf6a9072
Update to merged peripheral change. 2018-08-16 18:05:53 -07:00
Scott Shawcroft
96534e598e
Fix unix coverage and update translations. 2018-08-16 17:41:53 -07:00
Scott Shawcroft
76e0373576
Fix nrf and unix 2018-08-16 17:41:38 -07:00
Scott Shawcroft
2cd166b573
Fix esp and samd 2018-08-16 17:41:35 -07:00
Scott Shawcroft
de5a9d72dc
Compress all translated strings with Huffman coding. 
This saves code space in builds which use link-time optimization.
The optimization drops the untranslated strings and replaces them
with a compressed_string_t struct. It can then be decompressed to
a c string.

Builds without LTO work as well but include both untranslated
strings and compressed strings.

This work could be expanded to include QSTRs and loaded strings if
a compress method is added to C. Its tracked in #531.
 2018-08-16 17:40:57 -07:00
Noralf Trønnes
11cbeb87ad ports/atmel-samd: Implement i2cslave.I2CSlave 
This adds support for SAMD acting as a I2C slave in polled mode.
 2018-08-16 17:20:49 +02:00
Noralf Trønnes
b6822b86ac busio/I2C: Split out samd_i2c_get_sercom() 
It will be shared with I2CSlave.
 2018-08-16 17:06:40 +02:00
ladyada
d8f2a61c39 Change hallowing to shipping flash type W25Q64JV-IQ. tested! 2018-08-14 13:04:33 -04:00
hathach
e1ccc07841 remove bootloader & dfu-bootloader target 
user should go to bootloader repo to upgrade bootloader
 2018-08-14 20:19:28 +07:00
Dan Halbert
bbc034cd3d
Merge pull request #1104 from tannewt/more_strings 
Fixes and translate more strings.
 2018-08-09 20:00:18 -04:00
Scott Shawcroft
24e53ad591
Rework escaping and fix ESP build. 2018-08-09 15:58:45 -07:00
Scott Shawcroft
86d2154d71
Change file mode back. 2018-08-09 09:14:14 -07:00
Scott Shawcroft
94c5ceab36
Initial SAMR board revision. 2018-08-09 05:36:46 -07:00
Jeff Epler
b0e33f6a11 atmel-samd: UART: allocate rx buffer in long-lived region 
This is not strictly needed in order for #1056 to be resolved,
because the "make long-lived" machinery is unaware of this pointer.

However, as UARTs are assumed to be long-lived, this change is
beneficial because it moves the long-lived buffer into the upper
memory area with other long-lived objects, instead of remaining in
the low heap.
 2018-08-08 19:21:57 -05:00
Dan Halbert
2e80f37709
Merge pull request #1096 from tannewt/tune_neopixel 
Retune neopixel timings on SAMD51. They were too slow.
 2018-08-07 21:33:12 -04:00
Scott Shawcroft
b0dd645e27
Retune neopixel timings on SAMD51. They were too slow. 
Fixes #1083
 2018-08-07 16:58:37 -07:00
Scott Shawcroft
933add6cd8
Support internationalisation. 2018-08-07 14:58:57 -07:00
Dan Halbert
498fec64e2 increase new dynamic stack size to a comfortable value for now 2018-08-03 22:35:20 -04:00
Dan Halbert
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap 
Add basic memory allocation outside Python runtime
 2018-08-02 18:43:06 -04:00
Scott Shawcroft
5704bc8c93
Share memory.c and a bit of polish. 2018-08-02 14:35:46 -07:00
Scott Shawcroft
64e5691fe7
Update to peripherals merge. 2018-08-02 13:59:12 -07:00
Scott Shawcroft
168aa394db
Move pin struct to the peripherals library. 
Its slimmed down by removing the qstr and bit packing TCC info.

The trinket m0 build actually grows by 20 bytes. The arduino zero
build shrinks by 188 bytes.
 2018-08-02 13:59:05 -07:00
Scott Shawcroft
b50f46d4be
Rename to SRC_QSTR_PREPROCESSOR for clarity. 2018-08-02 11:07:22 -07:00
Scott Shawcroft
8cf03d2d00
Speed up QSTR creation by pre-filtering files before pre-processing. 2018-08-02 00:51:52 -07:00
hathach
0bc3432106 Merge branch 'master' into nrf52_sys_module 2018-08-01 11:53:12 +07:00
Dan Halbert
65bd07bb0b
Merge pull request #1074 from hathach/nrf52840_usb_hid 
Nrf52840 usb hid
 2018-08-01 00:47:50 -04:00
hathach
592c190069 PR review clean up 2018-08-01 11:31:32 +07:00
hathach
8640d37149 try to address sys module, compile ok 2018-08-01 10:19:20 +07:00
hathach
200669216e more clean up 2018-08-01 08:52:07 +07:00
hathach
bac233e99b clean up 2018-08-01 08:47:41 +07:00
hathach
533d8dda96 fix samd usb hid typo 2018-08-01 08:40:04 +07:00
hathach
6ddd8583da clean up 2018-08-01 08:20:20 +07:00
Scott Shawcroft
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-) 2018-07-31 12:42:21 -07:00
hathach
1e524f1b98 Merge branch 'master' into nrf52840_usb_hid 2018-08-01 00:58:23 +07:00
hathach
85bd46a4e1 enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS 2018-07-31 23:09:39 +07:00
hathach
4bece22c92 add hid keyboard LED indicator stub 2018-07-31 23:02:15 +07:00
hathach
05139e2aee all hid devices seems to be ok 2018-07-31 22:54:26 +07:00
hathach
2c85f42330 add usb hid syscontrol 2018-07-31 21:57:00 +07:00
hathach
ef58adacd3 usb hid consumer control works 2018-07-31 21:19:02 +07:00
hathach
fd661c1d57 improve usb hid 2018-07-31 21:06:24 +07:00
Scott Shawcroft
b334289669
Reenable LTO for debug. 2018-07-31 05:18:23 -07:00
Scott Shawcroft
12cf5e51c2
Allow for resizing the stack area. 2018-07-31 05:18:23 -07:00
Scott Shawcroft
777542c716
Add basic memory allocation outside Python runtime 
This allows for the heap to fill all space but the stack. It also
allows us to designate space for memory outside the runtime for
things such as USB descriptors, flash cache and main filename.

Fixes #754
 2018-07-31 05:18:03 -07:00
hathach
27b2a9fe59 add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO 2018-07-31 17:50:32 +07:00
hathach
d15caf0dbd hid keyboard and mouse work well 2018-07-31 16:42:04 +07:00
hathach
221d54a595 workaround to use lib/utils/interrupt_char.c 2018-07-31 14:28:34 +07:00
hathach
ae783b0b1a update tinyusb, set scsi sense key for unsupported commands 2018-07-31 13:54:58 +07:00
Scott Shawcroft
a6d94b6845
Merge pull request #1068 from dhalbert/micropython-25ae98f-merge 
Micropython 25ae98f merge
 2018-07-30 12:33:44 -07:00
Dan Halbert
fbe98ff9a9
Merge pull request #1071 from dhalbert/3.x-hallowing 
add HalloWing
 2018-07-29 20:24:47 -04:00
Dan Halbert
680597547c add HalloWing 2018-07-29 19:22:16 -04:00
Dan Halbert
bfbb5cde5a put back test in qemu-arm build 2018-07-28 23:40:17 -04:00
Dan Halbert
2e260a0eab Merge remote-tracking branch 'adafruit/master' into micropython-25ae98f-merge 2018-07-28 14:13:54 -04:00
Dan Halbert
f48b70050e merge finished 2018-07-28 13:29:47 -04:00
hathach
368d59796f adding usb_hid 
compiled with undefined ref
 2018-07-27 17:36:41 +07:00
hathach
21339c4155 house keeping 2018-07-27 17:22:21 +07:00
hathach
e86f7d0b88 add usb msc callback description 2018-07-27 00:17:14 +07:00
hathach
5bdf40901f update tusb lib 2018-07-26 17:16:41 +07:00
Dan Halbert
bc760dd341 WIP: complete manual inspection of all significant changes 2018-07-23 21:34:25 -04:00
hathach
bb28faf39c arturo182 review 2018-07-17 23:57:49 +07:00
hathach
a0b9871ba9 use seperate interrupt_char.c for nrf 
move usb descriptors into usb.c
 2018-07-17 21:52:20 +07:00
hathach
d4e84a9bd4 Merge branch 'master' into fix_nrf52840_serial 2018-07-17 21:27:16 +07:00
hathach
3525d65af3 should fix #1021 
- update tinyusb for wanted char
- move usb code into usb.c
 2018-07-17 21:24:49 +07:00
Dan Halbert
2809b4f9dd Merge branch 'master' into micropython-25ae98f-merge 2018-07-16 19:36:40 -04:00
Dan Halbert
a20ab40ed2 Merge 3.0.0 final bugfixes and changes to master 2018-07-16 09:01:46 -04:00
Dan Halbert
e2e01efa84 compiles and runs; hangs on import storage;storage.VfsFat.<tab> 2018-07-13 22:51:10 -04:00
Dan Halbert
bfe14ff824
Merge pull request #1014 from arturo182/nrf_shared_ble 
nrf: Split the ble module into a shared part and the port implementation
 2018-07-13 10:23:37 -04:00
Dan Halbert
414267388d
Merge pull request #1023 from arturo182/nrf_pyocd 
nrf: Fix flashing with pyocd
 2018-07-13 10:02:20 -04:00
arturo182
05c1384b67 nrf: Split the ble module into a shared part and the port implementation 
This allows other ports to implement these shared bindings.
 2018-07-13 16:01:15 +02:00
arturo182
883ca21321 nrf: Fix flashing with pyocd 2018-07-13 15:22:46 +02:00
arturo182
9729fc3d31 nrf: Fix BLE on nRF52840 after adding the USB functionality 2018-07-13 14:55:02 +02:00
Dan Halbert
7c219600a2 WIP: after merge; before testing 2018-07-11 16:45:30 -04:00
hathach
873e20273e fix travis build 2018-07-12 02:17:55 +07:00
hathach
f98c7f708e merge review 2018-07-12 01:37:23 +07:00
hathach
10846d316b Merge branch 'master' into nrf52840_usbboot 2018-07-11 21:35:44 +07:00
Dan Halbert
4962468fff
Merge pull request #1011 from arturo182/nrf_cleanup 
nrf: More cleanup and porting
 2018-07-10 15:44:30 -04:00
hathach
a53b1c7cf1 code format 2018-07-10 22:49:51 +07:00
arturo182
eab00ff140 nrf: Remove even more unused files 2018-07-10 14:59:22 +02:00
arturo182
2c63fb2a94 nrf: Remove the random hal and module 
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
 2018-07-10 14:59:22 +02:00
arturo182
1163462635 nrf: Remove the old time hal and replace with nRFx 2018-07-10 14:59:10 +02:00
Scott Shawcroft
e875f4e52e
Merge pull request #1002 from arturo182/nrfx_gpio 
nrf: Rewrite the DigitalInOut hal using nRFx
 2018-07-09 17:54:38 -07:00
Dan Halbert
8bb363f7c4 must set pull after setting direction with gpio_set_pin routines 2018-07-09 17:18:06 -04:00
hathach
0e819599e7 Merge branch 'master' into nrf52840_usbboot 2018-07-10 02:02:52 +07:00
hathach
7715d19efe update bootloader hex 2018-07-10 01:20:37 +07:00
hathach
97a1ae911e add family option for uf2 2018-07-10 01:18:14 +07:00
hathach
f199e87085 add ARRAY_SIZE 
which is missing when building with debug mode
 2018-07-10 01:06:57 +07:00
hathach
c5089d7274 generate uf2 by default 
update tusb
 2018-07-10 01:02:33 +07:00
Dan Halbert
64b9ee9c74
Merge pull request #985 from tannewt/heap_tweaks3 
A few heap related tweaks
 2018-07-08 23:21:38 -04:00
Scott Shawcroft
a45659c59a
Merge pull request #1000 from arturo182/nrfx_uart 
nrf: Rewrite the UART HAL using nRFx
 2018-07-08 20:17:47 -07:00
Scott Shawcroft
133b99b6f2
Merge pull request #999 from arturo182/nrf_mphalport 
nrf: mphalport cleanup
 2018-07-08 20:13:21 -07:00
Scott Shawcroft
fd5634e4aa
Merge pull request #992 from arturo182/nrf_i2c_fix 
nrf: Fix I2C transfers with data larger than HW allows
 2018-07-08 20:12:09 -07:00
arturo182
388f554ff6 nrf: Rewrite the DigitalInOut hal using nRFx 2018-07-08 17:48:32 +02:00
arturo182
25ece8fb3d nrf: Rewrite the UART HAL using nrfx 2018-07-08 16:42:04 +02:00
arturo182
c6a2a55bc9 nrf: Cleanup mpconfigboard files 
All the removed defines were used by legacy modules that are now
removed.
 2018-07-08 15:18:11 +02:00
arturo182
887486582e nrf: Remove port-specific help 
It contains mentions to the pyb module which was removed.
The ble-specific help will be re-added later when the API
is stabilized.
 2018-07-08 15:18:11 +02:00
arturo182
1ea633c484 nrf: mphalport cleanup 2018-07-08 14:39:30 +02:00
arturo182
da27253693 nrf: Fix I2C transfers with data larger than HW allows 2018-07-06 21:12:24 +02:00
arturo182
ac74edb4e4 nrf: Fix SPI transfers with data larger than HW allows 2018-07-06 21:10:25 +02:00
hathach
baf68a936e remove hal_time files 2018-07-06 15:59:20 +07:00
hathach
3e319694aa mp_hal_delay_ms() to call background task 
remove hal_time.c
 2018-07-06 15:48:01 +07:00
hathach
948ddf8463 make SD default to s140 and s132 for nrf52840 and nrf52832 
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
 2018-07-06 14:39:49 +07:00
hathach
6ef3a0b181 implement filesystem_writable_by_python() 2018-07-06 13:01:07 +07:00
Scott Shawcroft
54179a0189
Use .s in samd Makefile too. 2018-07-05 04:44:00 -07:00
hathach
0806c0a38b update fatfs cached sector when running write10 2018-07-05 17:43:38 +07:00
hathach
4e5d9a029d clean up 2018-07-05 17:26:07 +07:00
hathach
0365912e28 implement msc with internal_flash api 
Note: only work with SD is disabled.
 2018-07-05 16:19:04 +07:00
hathach
3564e98181 implement msc flash, seems to work 2018-07-05 15:22:23 +07:00
hathach
1745e20391 replace jlink with native usb cdc for serial REPL 2018-07-05 11:30:12 +07:00
hathach
be2ff20e42 enable usb cdc interface 
not handle anything yet.
 2018-07-04 17:15:49 +07:00
hathach
7fff7f5e70 add usb msc support for nrf52840 2018-07-04 16:40:53 +07:00
Scott Shawcroft
8fb976f0bd
Split out assembly source files. 2018-07-03 07:25:54 -07:00
mrmcwethy
d9723bb613
include RTC fix for SAMd51 in circuitpython build 2018-07-03 06:52:05 -07:00
Scott Shawcroft
074c5ea144
Merge pull request #977 from dhalbert/update_crickit_libs-2 
update crickit-related libs
 2018-07-03 12:04:05 -07:00
Dan Halbert
bf9981e8db bring all frozen libraries up to date 2018-07-03 14:39:21 -04:00
Scott Shawcroft
dbc977485c
Support gathering register values on nrf. 2018-07-03 06:31:07 -07:00
Scott Shawcroft
ec78d3cefd
Mark pointers in cpu registers as in use. 
This prevents bugs where gc_collect is called from C code that did
a recent allocation.
 2018-07-03 05:45:50 -07:00
hathach
46c453cf0a add tinyusb as submodule 2018-07-03 17:46:08 +07:00
hathach
b14b28067e Merge branch 'master' into nrf52840_usbboot 2018-07-03 17:29:28 +07:00
Scott Shawcroft
bf00cde37d
Comment tweak after board change 2018-07-02 14:51:06 -07:00
Scott Shawcroft
b91202969a
Merge pull request #982 from arturo182/nrf_makefile 
nrf: Save some flash bytes by using extra compile flags
 2018-07-02 14:33:47 -07:00
Scott Shawcroft
05a088b369
Merge pull request #972 from arturo182/nrf_i2c 
nrf: Rewrite the I2C common-hal using nrfx
 2018-07-02 14:33:06 -07:00
arturo182
da491ec961 nrf: Save some flash bytes by using extra compile flags 
Both of these are used in the atsamd port as well.
 2018-07-02 22:00:04 +02:00
Dan Halbert
7c9a0e2996 remove unnecessary extern in nrf/mphalport.c 2018-06-29 16:06:51 -04:00
Dan Halbert
7028a399c2 remove previously added esp8266/mphalport.{c,h} 2018-06-29 16:04:18 -04:00
Dan Halbert
2a0b857643 implement mp_hal_delay_us() to not need interrupts, and use it 2018-06-29 16:01:46 -04:00
mrmcwethy
df4469f92b Test the BOARD parameter for nullness; display a error if nothing provided 2018-06-29 12:22:31 -07:00
mrmcwethy
d392f01f2c include RTC fix for SAMd51 in circuitpython build 2018-06-29 05:45:38 -07:00
Dan Halbert
b4fd77bb7c fix nrf and esp8266 builds for OneWire fix 2018-06-29 00:00:05 -04:00
Dan Halbert
52a11547cb fix OneWire timing and DigitalInOut.switch_to_input() 2018-06-28 23:32:20 -04:00
Scott Shawcroft
429168d4ac
Merge pull request #970 from arturo182/nrf_softdev 
nrf: Remove unsupported softdevice defines
 2018-06-28 14:01:19 -07:00
Scott Shawcroft
007155276a
Merge pull request #969 from arturo182/nrf_more_commonhal 
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
 2018-06-28 14:00:45 -07:00
Scott Shawcroft
039b4dc00a
Merge pull request #968 from arturo182/nrf_qstr 
nrf: Remove old qstr defines
 2018-06-28 13:57:46 -07:00
Scott Shawcroft
ae82a93b56
Merge pull request #967 from arturo182/nrf_os 
nrf: Rewrite the os common-hal using nrfx
 2018-06-28 13:55:34 -07:00
arturo182
178c089045 nrf: Rewrite the I2C common-hal using nrfx 2018-06-28 22:45:02 +02:00
arturo182
6e6a500801 nrf: Rewrite the os common-hal using nrfx 2018-06-27 21:01:07 +02:00
arturo182
af5cb9c492 nrf: Remove unneeded hal files 2018-06-27 21:00:34 +02:00
arturo182
b87bba8a28 nrf: Rewrite more common-hal with nrfx and sync with atsamd port 2018-06-27 20:55:29 +02:00
arturo182
1fa8fac5d7 nrf: Remove old qstr defines 
These were used by the microbit music module, which was removed.
 2018-06-27 20:52:13 +02:00
arturo182
b9f02ca3c5 nrf: Remove unsupported softdevice defines 2018-06-27 20:48:57 +02:00
arturo182
2a12fcd18b nrf: Rewrite the AnalogIn common-hal using nrfx 2018-06-27 20:41:30 +02:00
hathach
c4f11dfd32 flash target update bootloader setting to skip crc checksum 2018-06-27 15:22:44 +07:00
hathach
8fbe1d73e9 clean up makefile 2018-06-27 15:13:20 +07:00
hathach
4920cc47ca move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it 2018-06-27 14:31:08 +07:00
hathach
bed7310fd7 update bin files 2018-06-27 14:13:18 +07:00
hathach
ecd3993d43 update pin map for feather52840 2018-06-27 14:06:15 +07:00
Dan Halbert
1f3de5174e Freeze Adafruit_CircuitPython_Crickit into crickit builds 2018-06-26 19:49:55 -04:00
Scott Shawcroft
91427b0b23
Merge pull request #959 from arturo182/nrf_spim 
nrf: Rewrite the SPI common-hal using nrfx
 2018-06-26 11:00:12 -07:00
Scott Shawcroft
d7d132d5a3
Merge pull request #960 from arturo182/nrf_stm_cleanup 
nrf: Remove leftovers from stm32 code copy
 2018-06-26 10:52:04 -07:00
arturo182
16973d0559 nrf: Remove unused hal files 
Makes it easier to keep track of what's left to rewrite.
 2018-06-26 00:13:41 +02:00
arturo182
2f1e678d60 nrf: Rewrite the SPI common-hal using nrfx 
Use SPIM2 on nRF52832 and SPIM3 on nRF52840. SPIM3 is able to go
up to 32MHz!
 2018-06-25 23:46:34 +02:00
arturo182
b14d13e318 nrf: Remove leftovers from stm32 code copy 2018-06-25 23:38:10 +02:00
hathach
8d065fe0e6 update reamde 2018-06-26 00:16:58 +07:00
hathach
54547683f9 add uf2, bootloader target 2018-06-25 23:31:14 +07:00
hathach
4722371be9 update bootloader hex with uf2 2018-06-25 23:27:00 +07:00
hathach
f5be5ed6ee Merge branch 'master' into nrf52840_usbboot 2018-06-25 17:12:24 +07:00
arturo182
596a1d8843 nrf: Rename feather52 to feather52832 in readme files 2018-06-22 10:04:39 +02:00
Damien George
a2ac7e4fc9 stm32/boards: Add .ld and af.csv files for STM32F722. 
These files can also be used for F723, F732 and F733 MCUs.
 2018-06-22 15:39:10 +10:00
Damien George
ec7982ec6d stm32/mboot: Add support for erase/read/write of external SPI flash. 
This patch adds support to mboot for programming external SPI flash.  It
allows SPI flash to be programmed via a USB DFU utility in the same way
that internal MCU flash is programmed.
 2018-06-22 15:30:34 +10:00
Damien George
7f41f73f0f stm32/qspi: Don't require data reads and writes to be a multiple of 4. 
Prior to this patch the QSPI driver assumed that the length of all data
reads and writes was a multiple of 4.  This patch allows any length.  Reads
are optimised for speed by using 32-bit transfers when possible, but writes
always use a byte transfer because they only use a single data IO line and
are relatively slow.
 2018-06-22 15:07:01 +10:00
jerryneedell
de4cd1ee73 add pins D3/D4 to pins.c 
fixes  #948
 2018-06-20 22:26:59 -04:00
arturo182
25e71a56d4 nrf: Update the PCA10056 example to use new pin naming 2018-06-20 23:39:36 +02:00
arturo182
deec17e4fe nrf: Remove really old examples 
These examples rely on machine and pyb modules, so they have to get.
Leaving 3 BLE examples that also rely on those modules, but can be
fixed to use CP's modules.
 2018-06-20 23:38:18 +02:00
arturo182
9c08db55ff nrf: Cleanup machine and microbit leftovers 
The music module was useful when this port had support for the
microbit, now that it was removed, it's not so useful.
 2018-06-20 23:30:34 +02:00
arturo182
c2d4d0a10b nrf: Simplify pin generation and definition 
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
 2018-06-20 23:26:32 +02:00
arturo182
ff918556cd nrf: Simplify the board makefiles 
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
 2018-06-20 21:21:45 +02:00
arturo182
5509f394dc nrf: Add a nrfx submodule and prepare for using the new drivers 2018-06-20 20:43:59 +02:00
arturo182
7cd34f2a94 nrf: Cleanup Makefile after nrf51 removal 2018-06-20 18:21:18 +02:00
arturo182
97f10241f9 nrf: Fix default board after feather52 rename 2018-06-20 18:21:18 +02:00
arturo182
b47a67d566 nrf: Remove machine, pyb and utime modules 
Micropython legacy, keeping it consistent with atsam port.
 2018-06-20 18:21:18 +02:00
jerryneedell
80d16cb7df
add pins D3/D4 to pins.c 
fixes  #948
 2018-06-19 22:34:29 -04:00
Damien George
561ae9a91b stm32/boards/NUCLEO_F091RC: Fix TICK_INT_PRIORITY so it is highest prio. 
Fixes issue #3880.
 2018-06-20 12:24:18 +10:00
Damien George
5962c210c5 stm32/mboot: Define constants for reset mode cycling and timeout. 
And fix timeout value so that it does actually finish with reset_mode=1.
 2018-06-19 23:23:17 +10:00
hathach
61437106e7 update bootloader for feather nrf52840 2018-06-19 15:27:07 +07:00
hathach
6d2702ed98 Merge branch 'master' into nrf52840_usbboot 2018-06-19 14:50:17 +07:00
Scott Shawcroft
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6 
nrf: Use the production version of s140 6.0.0
 2018-06-18 16:29:41 -07:00
arturo182
feee808955 nrf: Use the production version of s140 6.0.0 2018-06-18 23:12:28 +02:00
Scott Shawcroft
05547b72ac Switch to Feather52s full name to avoid confusion with the nrf52840 later. 
Fixes #940
 2018-06-18 10:51:04 -07:00
Damien George
e49cd106b4 stm32/spi: Fix SPI driver so it can send/recv more than 65535 bytes. 
The DMA peripheral is limited to transferring 65535 elements at a time so
in order to send more than that the SPI driver must split the transfers up.

The user must be aware of this limit if they are relying on precise timing
of the entire SPI transfer, because there might be a small delay between
the split transfers.

Fixes issue #3851, and thanks to @kwagyeman for the original fix.
 2018-06-18 17:41:14 +10:00
Damien George
338af99a7f stm32/can: Use MP_OBJ_ARRAY_TYPECODE_FLAG_RW where appropriate. 2018-06-18 13:42:05 +10:00
rolandvs
ca2b1d6b36 stm32/boards/NUCLEO_F091RC: Add Arduino-named pins and rename CPU pins. 
To match pin labels on other NUCLEO 64 boards.
 2018-06-18 13:06:27 +10:00
rolandvs
0d3de68669 stm32/boards/stm32f091_af.csv: Split labels that are multiple funcs. 2018-06-18 13:05:24 +10:00
Damien George
a5f5552a0a tests/unix/extra_coverage: Don't test stream objs with NULL write fun. 
This behaviour of a NULL write C method on a stream that uses the write
adaptor objects is no longer supported.  It was only ever used by the
coverage build for testing the fail path of mp_get_stream_raise().
 2018-06-18 12:35:56 +10:00
Damien George
ceff433fcc stm32/mboot: Adjust user-reset-mode timeout so it ends with mode=1. 
If the user button is held down indefinitely (eg unintenionally, or because
the GPIO signal of the user button is connected to some external device)
then it makes sense to end the reset mode cycle with the default mode of
1, which executes code as normal.
 2018-06-18 12:23:27 +10:00
Dan Halbert
be5eb91df8
Merge pull request #938 from sommersoft/esp_busio_fix 
ESP8266: Fix pin locking during busio.SPI.configure
 2018-06-16 11:49:20 -04:00
Scott Shawcroft
a5e03b76a6 Split out the peripherals library in preparation of sharing with MakeCode. 2018-06-15 16:16:21 -07:00
Limor "Ladyada" Fried
9fc0ec6af8
Merge pull request #934 from microbuilder/usbboot 
[WIP] nRF52840 USB Bootloader
 2018-06-15 09:35:30 -07:00
Damien George
34b2f6b6fc esp32/modules: Include umqtt library in frozen modules. 2018-06-15 16:39:49 +10:00
Damien George
d61d119c94 esp32: Update to latest ESP IDF. 2018-06-15 16:23:53 +10:00
sommersoft
23b6d33455 fixes #642; spi_init_gpio() is now bypassed for both construct and configure 2018-06-15 05:03:52 +00:00
Damien George
7be4a23c0c stm32/i2cslave: Fix ordering of event callbacks in slave IRQ handler. 
It's possible (at least on F4 MCU's) to have RXNE and STOPF set at the same
time during a call to the slave IRQ handler.  In such cases RXNE should be
handled before STOPF so that all bytes are processed before
i2c_slave_process_rx_end() is called.
 2018-06-15 14:15:31 +10:00
Damien George
bc5e8a2cb6 stm32/i2c: Fix num_acks calculation in i2c_write for F0 and F7 MCU's. 
Due to buffering of outgoing bytes on the I2C bus, detection of a NACK
using the ISR_NACKF flag needs to account for the case where ISR_NACKF
corresponds to the previous-to-previous byte.
 2018-06-15 14:10:53 +10:00
Dan Halbert
fa814a32ce Make Trinket M0 build fit; make RAMFS in vfs_fat_* tests be compliant with expected API 2018-06-14 21:02:12 -04:00
Damien George
37a7257aff stm32/timer: Support TIM1 on F0 MCUs. 2018-06-15 10:50:08 +10:00
Dan Halbert
e724bc1c4e Fix playing audio from SD card 2018-06-14 18:47:40 -04:00
Damien George
cc5a94044a drivers/memory/spiflash: Rename functions to indicate they use cache. 
This patch renames the existing SPI flash API functions to reflect the fact
that the go through the cache:

    mp_spiflash_flush -> mp_spiflash_cache_flush
    mp_spiflash_read  -> mp_spiflash_cached_read
    mp_spiflash_write -> mp_spiflash_cached_write
 2018-06-14 16:52:56 +10:00
Damien George
335d26b27d stm32/boards/STM32L476DISC: Update SPI flash config for cache change. 2018-06-14 16:52:56 +10:00
hathach
35d38dbfed update nrf52840 bootloader hex 2018-06-13 17:27:55 +07:00
Damien George
cf1509c911 esp32/fatfs_port: Implement get_fattime so FAT files have a timestamp. 
Fixes issue #3859.
 2018-06-13 14:13:34 +10:00
Scott Shawcroft
618943d90a
Merge pull request #926 from nickzoic/circuitpython-nickzoic-716-pulseio-esp8266 
Implement pulseio.PulseIn and PulseOut for ESP8266 #716
 2018-06-12 18:33:16 -07:00
Scott Shawcroft
ee817a2fa8 Correct UART reads to return error on timeout. 
This causes read to correctly return None instead of b''.

Fixes #874
 2018-06-12 14:03:27 -07:00
Dan Halbert
4691b30c02 PDMIn: turn serializer on when starting DMA 2018-06-12 12:35:51 -04:00
Damien George
5042d98514 stm32/Makefile: Rebuild all qstrs when any board configuration changes. 2018-06-12 13:53:43 +10:00
Damien George
0501427907 esp32: Remove port-specific uhashlib implementation and use common one. 
Now that the common module has mbedtls support for both SHA1 and SHA256 it
can now be used on this port.
 2018-06-12 13:50:11 +10:00
Damien George
565f590586 ports: Enable IOBase on unix, stm32, esp8266 and esp32. 
It's a core feature, in particular required for user-streams with uasyncio.
 2018-06-12 12:29:26 +10:00
Damien George
b2fa1b50ed ports: Call gc_sweep_all() when doing a soft reset. 
This calls finalisers of things like files and sockets to cleanly close
them.
 2018-06-12 11:56:25 +10:00
Scott Shawcroft
73dadb0669 Update to the latest ASF4 which includes an I2C timeout extension while waiting for clock stretching. 
Fixes #778
 2018-06-11 18:37:48 -07:00
Dan Halbert
068ffd04a6
Merge pull request #919 from adafruit/jerryneedell-patch-2 
fix #918
 2018-06-10 09:17:49 -04:00
Nick Moore
f72dcc64e6 Fixes #918 (PulseIn.get_paused) ... 2018-06-10 22:37:15 +10:00
Nick Moore
b25cbd340b Merge commit '2129bbe160278f7cd2cece939f81900a41f8aa86' into circuitpython-nickzoic-716-pulseio-esp8266 2018-06-10 22:08:58 +10:00
Nick Moore
972b03850f Merge branch 'master' into circuitpython-nickzoic-716-pulseio-esp8266 2018-06-10 22:01:35 +10:00
jerryneedell
8150150a24
return "false" for stub call 
See #918 for discussion
 2018-06-10 07:11:44 -04:00
jerryneedell
2129bbe160
Update PulseIn.c 2018-06-10 07:08:56 -04:00
jerryneedell
5724fd795a
fix #918 
Add stub for common_hal_pulseio_pulsein_get_paused  to make ESP8266 build compatible with PR #901
 2018-06-10 05:59:20 -04:00
Dan Halbert
b2d98edb4e
Merge pull request #901 from tannewt/pulseio_too_fast 
Prevent freezing USB during high frequency PulseIn.
 2018-06-08 17:59:06 -04:00
Scott Shawcroft
8fb34a5846 Use bool not int. 2018-06-08 14:57:20 -07:00
Scott Shawcroft
8195df1b55 Stub out get_paused in nrf builds. 2018-06-08 14:01:54 -07:00
Scott Shawcroft
66b79723b6 Add code size analysis tool and shrink samd.clock a smidge. 2018-06-08 12:56:32 -07:00
Scott Shawcroft
769788d3c7 Turn off USB pin objects since they are always used for USB. 2018-06-08 12:56:32 -07:00
Scott Shawcroft
383bf9a59e Wait for the DFLL to be stable. 2018-06-08 12:56:32 -07:00
Scott Shawcroft
07a8899c72 Support M4 2018-06-08 12:56:32 -07:00
Scott Shawcroft
2fbab8067a Prevent freezing USB during high frequency PulseIn. 
We now track the last time the background task ran and bail on the
PulseIn if it starves the background work. In practice, this
happens after the numbers from pulsein are no longer accurate.

This also adjusts interrupt priorities so most are the lowest level
except for the tick and USB interrupts.

Fixes #516 and #876
 2018-06-08 12:56:32 -07:00
Dan Halbert
218930d18b Check for PDMIn DMA getting stuck. 2018-06-08 08:23:52 -04:00
hathach
418e28c7dc update nrf52840 bootloader hex and target 2018-06-08 16:10:49 +07:00
hathach
2b3436e87c add feather nrf52 uart rts, cts support 2018-06-08 15:59:38 +07:00
hathach
c10899d13f allow to flash feather52 and feather52840 with jlink 
add crc bypass magic to bootloader settting
 2018-06-08 15:11:17 +07:00
Nick Moore
6af1fbacc9 Work on pulseio.PulseOut for #716 ESP8266 
Switch to ets_delay_us but the PWM is still way too slow to be useful.
 2018-06-08 16:41:42 +10:00
Nick Moore
011edf2472 Clean up interrupt handling for pulseio.PulseIn implementation for #716 ESP8266 2018-06-08 15:31:16 +10:00
Damien George
24c416cc66 stm32/mboot: Increase USB rx_buf and DFU buf sizes to full 2048 bytes. 
The DFU USB config descriptor returns 0x0800=2048 for the supported
transfer size, and this applies to both TX (IN) and RX (OUT).  So increase
the rx_buf to support this size without having a buffer overflow on
received data.

With this patch mboot in USB DFU mode now works with dfu-util.
 2018-06-08 15:29:52 +10:00
Nick Moore
c4cf1c5221 Initial pulseio.PulseOut implementation for #716 ESP8266 2018-06-08 15:28:05 +10:00
Nick Moore
7adc69baf9 Initial pulseio.PulseIn implmentation for #716 ESP8266 2018-06-08 15:27:59 +10:00
Glenn Moloney
039f196c56 esp32/modnetwork: Fix isconnected() when using static IP config. 
Currently <WLAN>.isconnected() always returns True if a static IP is set,
regardless of the state of the connection.

This patch introduces a new flag 'wifi_sta_connected' which is set in
event_handler() when GOT_IP event is received and reset when DISCONNECTED
event is received (unless re-connect is successful).  isconnected() now
simply returns the status of this flag (for STA_IF).

The pre-existing flag misleadingly named 'wifi_sta_connected" is also
renamed to 'wifi_sta_connect_requested'.

Fixes issue #3837
 2018-06-08 13:13:21 +10:00
Damien George
190c7dba89 stm32/mpconfigport.h: Enable DELATTR_SETATTR and BUILTINS_NOTIMPLEMENTED 
MICROPY_PY_DELATTR_SETATTR can now be enabled without a performance hit for
classes that don't use this feature.

MICROPY_PY_BUILTINS_NOTIMPLEMENTED is a minor addition that improves
compatibility with CPython.
 2018-06-08 12:55:18 +10:00
Damien George
93150a0d40 ports: Enable descriptors on stm32, esp8266, esp32 ports. 
They are now efficient (in runtime performance) and provide a useful
feature that's hard to obtain without them enabled.

See issue #3644 and PR #3826 for background.
 2018-06-08 12:23:08 +10:00
Kattni Rembor
ba7e0e2f86 Add Adafruit to other M4 board name strings 2018-06-07 13:39:04 -04:00
Kattni Rembor
7b2875d54a Add Adafruit to board name string 2018-06-07 13:33:13 -04:00
Kattni Rembor
0ab2a60dcd Update ItsyBitsy board name to one word 2018-06-07 13:12:44 -04:00
hathach
c854e2dc17 Merge branch 'master' into usbboot 2018-06-07 13:51:21 +07:00
hathach
9bb4ded5fa Merge remote-tracking branch 'upstream/master' 2018-06-07 13:50:04 +07:00
Damien George
fadd6bbe43 unix/moduos_vfs: Add missing uos functions from traditional uos module. 
Now that the coverage build has fully switched to the VFS sub-system these
functions were no longer available, so add them to the uos_vfs module.

Also, vfs_open is no longer needed, it's available as the built-in open.
 2018-06-06 14:28:23 +10:00
Damien George
1d40f12e44 unix: Support MICROPY_VFS_POSIX and enable it in coverage build. 
The unix coverage build is now switched fully to the VFS implementation, ie
the uos module is the uos_vfs module.  For example, one can now sandbox uPy
to their home directory via:

    $ ./micropython_coverage

    >>> import uos
    >>> uos.umount('/') # unmount existing root VFS
    >>> vfs = uos.VfsPosix('/home/user') # create new POSIX VFS
    >>> uos.mount(vfs, '/') # mount new POSIX VFS at root

Some filesystem/OS features may no longer work with the coverage build due
to this change, and these need to be gradually fixed.

The standard unix port remains unchanged, it still uses the traditional uos
module which directly accesses the underlying host filesystem.
 2018-06-06 14:28:23 +10:00
Damien George
f35aae366c extmod/vfs_fat: Rename FileIO/TextIO types to mp_type_vfs_fat_XXX. 
So they don't clash with other VFS implementations.
 2018-06-06 14:28:23 +10:00
Dan Halbert
9ba6990228 Feather M0 Express build with Crickit libraries 2018-06-05 18:21:47 -04:00
Dan Halbert
74ced174ce
Merge pull request #898 from dhalbert/feather_m4_d4 
add PA14 as D4 to Feather M4 Express
 2018-06-05 11:41:31 -04:00
Dan Halbert
7e7e33e460 add PA14 as D4 to Feather M4 Exprses 2018-06-05 08:15:34 -04:00
Damien George
aace60a75e esp8266/modules/ntptime.py: Remove print of newly-set time. 
It should be up to the user if they want to print the new time out or not.

Fixes issue #3766.
 2018-06-05 14:30:35 +10:00
Damien George
a90124a9e2 esp32: Add support for building with external SPI RAM. 
This patch adds support for building the firmware with external SPI RAM
enabled.  It is disabled by default because it adds overhead (due to
silicon workarounds) and reduces performance (because it's slower to have
bytecode and objects stored in external RAM).

To enable it, either use "make CONFIG_SPIRAM_SUPPORT=1", or add this line
to you custom makefile/GNUmakefile (before "include Makefile"):

    CONFIG_SPIRAM_SUPPORT = 1

When this option is enabled the MicroPython heap is automatically allocated
in external SPI RAM.

Thanks to Angus Gratton for help with the compiler and linker settings.
 2018-06-05 13:57:59 +10:00
Angus Gratton
bc92206f89 esp32/Makefile: Extract common C & C++ flags for consistent compilation. 2018-06-05 13:05:12 +10:00
Scott Shawcroft
0c7c0821fc
Merge pull request #891 from godlygeek/low_flash_errno_fixes 
Human readable OSError messages for low flash devices
 2018-06-04 17:22:57 -07:00
Damien George
df13ecde06 cc3200/mods: Include stream.h to get definition of mp_stream_p_t. 2018-06-04 16:58:45 +10:00
Damien George
309fe39dbb stm32/modnetwork: Fix arg indexing in generic ifconfig method. 2018-06-03 21:50:49 +10:00
Matt Wozniski
d0e6bb269f Use the system errno's on nrf 2018-06-02 12:55:07 -04:00
Scott Shawcroft
e580d22f4a Use the external crystal on SAMD21 again. 
Also, re-enable calibration storage for CircuitPlayground Express.
Tested with a 500hz PWMOut on Metro M0 with Saleae:
 * with crystal 500hz
 * with usb 500hz +- 0.1hz
 * without either 487hz += 0.1hz

SAMD51 is skipped due to DFLL errata and the fact it defaults to a
factory calibrated 48mhz that works fine for USB.

Fixes #648
 2018-06-01 18:01:42 -07:00
Matt Wozniski
22f4438787 Prune atmel-samd errno list 
Remove errnos that are only raised by modules that aren't linked into
the atmel-samd port.
 2018-06-01 19:04:14 -04:00
Matt Wozniski
e798b67ca2 Begin a custom list of errnos for atmel-samd 
The uerrno module was written to allow boards to customize the list of
errnos they can raise.  Start by copying the default list.
 2018-06-01 19:04:04 -04:00
Scott Shawcroft
717199018b Adapt for feedback and hack around pIRkey size constraint. 2018-06-01 15:08:52 -07:00
Dan Halbert
f386144428 redo state algorithm 2018-06-01 15:08:52 -07:00
Scott Shawcroft
9920f0a5de atmel-samd: Make ticks more atomic. 
Always use current_tick when sub millisecond precision is required.
Otherwise getting the ms/us to correspond is tricky.
 2018-06-01 15:08:52 -07:00
Scott Shawcroft
d0fb6e7a2f atmel-samd: Add rotary encoder support. 
Fixes #283
 2018-06-01 15:08:48 -07:00
Scott Shawcroft
fd71e56891 atmel-samd: Re-org helper peripheral files into their own subdirectory. 
Ideally in the future they won't depend on ASF4 or MicroPython.
 2018-06-01 15:07:31 -07:00
Dan Halbert
ae31c4ac18
Merge pull request #889 from tannewt/audioio_timers_in_use 
Turn off timer on AudioOut deinit.
 2018-06-01 18:03:29 -04:00
Dan Halbert
ea95eb730a
Merge pull request #890 from tannewt/brownout3 
Support brownout to safe mode. Fixes #870
 2018-06-01 18:02:13 -04:00
Scott Shawcroft
f38ce1060c Support brownout to safe mode. Fixes #870 2018-06-01 13:45:28 -07:00
Scott Shawcroft
bf1f0b3d11 Turn off timer on AudioOut deinit. 
Thanks to @sommersoft for spotting the error.

Fixes #850
 2018-06-01 13:32:45 -07:00
Noralf Trønnes
e158702a68 atmel-samd/samd51: Use crystal for RTC 
This uses the crystal to clock the RTC on boards which have a crystal.

Disable clock generator 2 which was enabled in commit
8e2080411f ("atmel-samd: Add rtc module support").
samd51 differs from samd21 when it comes to the RTC clock. samd51 doesn't
have an explicit clock peripheral so no need for a clock generator.

The same commit didn't even setup XOSC32K correctly, it missed EN1K and XTALEN.

The RTC uses the 1k clock output, so enable it on the OSCULP32K even if it works without it.
 2018-06-01 18:03:23 +02:00
Noralf Trønnes
ab7ddfddd5 atmel-samd/samd51: Refactor clock setup 
Refactor the convoluted asf4 clock setup into something more readable.

enable_clock_generator() has 2 changes:
- Set 'Output enabled' to match the current clock setup
- Handle divisors above 511

Add an enable_clock_generator_sync() version which makes it possible to setup
clocks without waiting for syncing. The bootup would hang without this.

I have checked these registers:

 NVMCTRL->CTRLA = 0x00000004

 Peripheral clocks (only non-zero shown):
 PCHCTRL[1]=0x00000045
 PCHCTRL[10]=0x00000041

 Generator clocks (only non-zero shown):
 GENCTRL[0] = 0x00010907
 GENCTRL[1] = 0x00010906
-GENCTRL[2] = 0x00041104
+GENCTRL[2] = 0x00200904
 GENCTRL[4] = 0x00010907
 GENCTRL[5] = 0x00180906

 DFLL clock:
 OSCCTRL->DFLLCTRLA = 0x00000082
 OSCCTRL->DFLLCTRLB = 0x00000000
 OSCCTRL->DFLLVAL = 0x00008082
 OSCCTRL->DFLLMUL = 0x00000000

 DPLL clocks:
 OSCCTRL->Dpll[0].DPLLCTRLA=0x00000002
 OSCCTRL->Dpll[0].DPLLCTRLB=0x00000000
 OSCCTRL->Dpll[0].DPLLRATIO=0x0000003b
 OSCCTRL->Dpll[1].DPLLCTRLA=0x00000080
 OSCCTRL->Dpll[1].DPLLCTRLB=0x00000020
 OSCCTRL->Dpll[1].DPLLRATIO=0x00000000

 OSC32KCTRL clock:
 OSC32KCTRL->RTCCTRL = 0x00000000
 OSC32KCTRL->XOSC32K = 0x00002082
 OSC32KCTRL->CFDCTRL = 0x00000000
 OSC32KCTRL->EVCTRL = 0x00000000
 OSC32KCTRL->OSCULP32K = 0x00002300

Only gen2 changed which is due to samd51 having more bits in the simple
division register so DIVSEL wasn't necessary, and it didn't have OE set.
 2018-06-01 18:02:35 +02:00
Noralf Trønnes
5c6aea9fd8 atmel-samd/samd51: Implement samd.clock 
Fill out the dummy implementation.
 2018-06-01 18:01:08 +02:00
Damien George
7d86ac6c01 stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP. 
The Wiznet5k series of chips support a MACRAW mode which allows the host to
send and receive Ethernet frames directly.  This can be hooked into the
lwIP stack to provide a full "socket" implementation using this Wiznet
Ethernet device.  This patch adds support for this feature.

To enable the feature one must add the following to mpconfigboard.mk, or
mpconfigport.mk:

    MICROPY_PY_WIZNET5K = 5500

and the following to mpconfigboard.h, or mpconfigport.h:

    #define MICROPY_PY_LWIP (1)

After wiring up the module (X5=CS, X4=RST), usage on a pyboard is:

    import time, network
    nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
    nic.active(1)
    while not nic.isconnected():
        time.sleep_ms(50) # needed to poll the NIC
    print(nic.ifconfig())

Then use the socket module as usual.

Compared to using the built-in TCP/IP stack on the Wiznet module, some
performance is lost in MACRAW mode: with a lot of memory allocated to lwIP
buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared
with 1M/sec when using the TCP/IP stack on the Wiznet module.
 2018-06-01 14:21:38 +10:00
Damien George
d9f1ecece2 stm32/modnetwork: Provide generic implementation of ifconfig method. 
All it needs is a lwIP netif to function.
 2018-06-01 13:33:14 +10:00
Damien George
7437215ad7 stm32/modnetwork: Change base entry of NIC object from type to base. 
mod_network_nic_type_t doesn't need to be an actual uPy type, it just needs
to be an object.
 2018-06-01 13:31:28 +10:00
Damien George
6d87aa54d6 stm32/modnetwork: Don't take netif's down when network is deinited. 
It should be up to the NIC itself to decide if the network interface is
removed upon soft reset.  Some NICs can keep the interface up over a soft
reset, which improves usability of the network.
 2018-06-01 13:27:06 +10:00
Radomir Dopieralski
d02899f822 Add gamepad_singleto to root pointers for the nrf port 2018-05-30 23:11:23 +02:00
Radomir Dopieralski
b219ce6d37 Add gamepad_singleton to root pointers 2018-05-30 23:11:22 +02:00
Dan Halbert
eab8e43188 rev E feather M4 express; remove named AREF pins 2018-05-29 20:25:28 -04:00
Damien George
a1acbad27a stm32/flash: Increase H7 flash size to full 2MiB. 2018-05-30 09:54:51 +10:00
rolandvs
958fa74521 stm32/boards: Ensure USB OTG power is off for NUCLEO_F767ZI. 
And update the GPIO init for NUCLEO_H743ZI to consistently use the mphal
functions.
 2018-05-30 09:51:19 +10:00
rolandvs
50bc34d4a4 stm32/boards: Split combined alt-func labels and fix some other errors. 
Pins with multiple alt-funcs for the same peripheral (eg USART_CTS_NSS)
need to be split into individual alt-funcs for make-pins.py to work
correctly.

This patch changes the following:
- Split `..._CTS_NSS` into `..._CTS/..._NSS`
- Split `..._RTS_DE` into `..._RTS/..._DE`
- Split `JTDO_SWO` into `JTDO/TRACESWO` for consistency
- Fixed `TRACECK` to `TRACECLK` for consistency
 2018-05-29 21:37:49 +10:00
Damien George
98d1609358 stm32/README: Update to include STM32F0 in list of supported MCUs. 2018-05-28 22:04:08 +10:00
Damien George
e681372017 stm32/boards: Add NUCLEO_F091RC board configuration files. 2018-05-28 21:49:49 +10:00
Damien George
1163400039 stm32/boards: Add alt-func CSV list and linker script for STM32F091. 2018-05-28 21:49:49 +10:00
Damien George
ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George
4a7d157a5b stm32/boards: Add startup_stm32f0.s for STM32F0 MCUs. 
Sourced from STM32Cube_FW_F0_V1.9.0.
 2018-05-28 21:49:49 +10:00
Damien George
6d83468a30 stm32: Allow a board to disable MICROPY_VFS_FAT. 2018-05-28 21:46:20 +10:00
Damien George
5c0685912f stm32/timer: Make timer_get_source_freq more efficient by using regs. 
Use direct register access to get the APB clock divider.  This reduces code
size and makes the code more efficient.
 2018-05-28 21:46:20 +10:00
Damien George
070937fe93 stm32: Add support for Cortex-M0 CPUs. 2018-05-28 21:46:20 +10:00
Damien George
f497723802 stm32: Allow to have no storage support if there are no block devices. 
If no block devices are defined by a board then storage support will be
disabled.  This means there is no filesystem provided by either the
internal flash or external SPI flash.  But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
 2018-05-28 21:45:46 +10:00
Damien George
aa4a7a8732 stm32/usb: Guard USB device code with #if for whether USB is enabled. 
With this change, all the USB source code can now be passed through the
compiler even if the MCU does not have a USB peripheral.
 2018-05-28 21:45:46 +10:00
Nick Moore
ef4c8e6e97 esp32: Silence ESP-IDF log messages when in raw REPL mode. 
This prevents clients such as ampy, mpy-utils, etc getting confused by
extraneous data.
 2018-05-28 20:15:08 +10:00
Dan Halbert
754c36bb37
Merge pull request #867 from dhalbert/fix_pirkey_apa102 
3.0 pirkey build including appropriate frozen modules
 2018-05-24 22:07:14 -04:00
Dan Halbert
ee896cdd41 restore I2C and UART. Don't do port.c resets and inits for modules that are not available. 2018-05-24 20:20:18 -04:00
Scott Shawcroft
42bf3a1306 Remove asf3 nvm code. 2018-05-24 13:14:40 -07:00
Dan Halbert
b9f36184f5 refine pirkey build 2018-05-24 13:28:03 -04:00
Damien George
15ddc20436 stm32: Add new component, the mboot bootloader. 
Mboot is a custom bootloader for STM32 MCUs.  It can provide a USB DFU
interface on either the FS or HS peripherals, as well as a custom I2C
bootloader interface.
 2018-05-24 23:21:19 +10:00
Damien George
f47eeab0ad stm32: Add low-level hardware I2C slave driver. 2018-05-24 23:11:13 +10:00
Damien George
4200018a05 stm32: Remove unneeded HTML release notes from usbdev and usbhost dirs. 
These files provide no additional information, all the version and license
information is captured in the relevant files in these subdirectories.

Thanks to @JoeSc for the original patch.
 2018-05-24 11:28:54 +10:00
Dan Halbert
083f91363a pirkey APA102 defs were commented out in mpconfigboard.h 2018-05-23 18:21:07 -04:00
Scott Shawcroft
aa86a1457f Use merged in FreeTouch 2018-05-23 11:57:35 -07:00
Dan Halbert
6af5fc2796
Merge pull request #861 from tannewt/touchio3 
Turn on touchio for M0 boards.
 2018-05-23 14:20:15 -04:00
Scott Shawcroft
641caaa6dd Gain space back in non-Express builds by using -finline-limit 2018-05-23 10:36:59 -07:00
Damien George
df9b7e8f24 esp32/esp32.custom_common.ld: Put soc code in iram0. 
This is what the IDF does, it must be done.
 2018-05-23 12:57:50 +10:00
Scott Shawcroft
3607d3ba2c Correctly reset the PTC 2018-05-22 14:20:35 -07:00
Scott Shawcroft
31bcd1c45c Fixup gclk init 2018-05-22 13:56:12 -07:00
Scott Shawcroft
99123a8621 Turn on touchio for M0 boards. M4 will come later once its supported 
by FreeTouch.

Fixes #670
 2018-05-22 13:49:08 -07:00
Dan Halbert
22405d6bdb
Merge pull request #860 from dhalbert/3.0-cpx-crickit 
turn off longint on cpx crickit; update frozen libs
 2018-05-22 16:28:42 -04:00
Scott Shawcroft
165b28438a
Merge pull request #854 from python-ugame/extra-override 
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
 2018-05-22 10:22:35 -07:00
Dan Halbert
0d7db29630 turn off longint on cpx crickit; update frozen libs 2018-05-22 13:03:13 -04:00
Dan Halbert
49a81d5c4b LONGLONG typo 2018-05-22 09:35:29 -04:00
Dan Halbert
45db48bbaa make longint choice mechanism more readable 2018-05-22 08:04:14 -04:00
Damien George
20b4b85f72 ports: Enable MICROPY_PY_BUILTINS_ROUND_INT on selected ports. 2018-05-22 14:18:16 +10:00
Dan Halbert
5680933483 refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00
Damien George
e773a2cdba stm32/main: Use consistent indenting of macro #if's. 2018-05-22 13:17:03 +10:00
Damien George
f68e722005 stm32/rng: Use Yasmarang for rng_get() if MCU doesn't have HW RNG. 2018-05-22 10:36:03 +10:00
Damien George
cda964198a stm32: Integrate lwIP as implementation of usocket module. 
This patch allows to use lwIP as the implementation of the usocket module,
instead of the existing socket-multiplexer that delegates the entire TCP/IP
layer to the NIC itself.

This is disabled by default, and enabled by defining MICROPY_PY_LWIP to 1.

When enabled, the lwIP TCP/IP stack will be included in the build with
default settings for memory usage and performance (see
lwip_inc/lwipopts.h).  It is then up to a particular NIC to register itself
with lwIP using the standard lwIP netif API.
 2018-05-21 17:36:06 +10:00
Radomir Dopieralski
6a6ab2b0ec Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h 
Some boards (like the uGame10) may want to have their own set of extra
modules. This change lets them override EXTRA_BUILTIN_MODULES in their
mpconfigboard.h and makes the ugame10 board do that.
 2018-05-21 09:23:58 +02:00
Damien George
6c955932f3 stm32/rtc: Don't try to set SubSeconds value on RTC. 
The hardware doesn't allow it, instead the value is reset to 255 upon
setting the other calendar/time values.
 2018-05-21 14:08:37 +10:00
Daniel Shaulov
cac2eddc16 minimal/main: Allow to compile without GC enabled. 2018-05-21 13:13:21 +10:00
Damien George
afd0701bf7 esp8266: Change UART(0) to attach to REPL via uos.dupterm interface. 
This patch makes it so that UART(0) can by dynamically attached to and
detached from the REPL by using the uos.dupterm function.  Since WebREPL
uses dupterm slot 0 the UART uses dupterm slot 1 (a slot which is newly
introduced by this patch).  UART(0) must now be attached manually in
boot.py (or otherwise) and inisetup.py is changed to provide code to do
this.  For example, to attach use:

    import uos, machine
    uart = machine.UART(0, 115200)
    uos.dupterm(uart, 1)

and to detach use:

    uos.dupterm(None, 1)

When attached, all incoming chars on UART(0) go straight to stdin so
uart.read() will always return None.  Use sys.stdin.read() if it's needed
to read characters from the UART(0) while it's also used for the REPL (or
detach, read, then reattach).  When detached the UART(0) can be used for
other purposes.

If there are no objects in any of the dupterm slots when the REPL is
started (on hard or soft reset) then UART(0) is automatically attached.
Without this, the only way to recover a board without a REPL would be to
completely erase and reflash (which would install the default boot.py which
attaches the REPL).
 2018-05-21 11:31:59 +10:00
Damien George
2923671a0c esp32/Makefile: Update to latest ESP IDF version. 2018-05-21 11:28:36 +10:00
Paul Sokolovsky
478410b409 zephyr/Makefile: Add kobj_types_h_target to Z_EXPORTS. 
New generated Zephyr header file, without it build breaks.
 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
5a023372df zephyr: Add prj_disco_l475_iot1.conf with sensor drivers. 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
7afbc49863 zephyr/prj_base.conf: Enable DHCP and group static IPs together. 
Add CONFIG_NET_DHCPV4, which, after
https://github.com/zephyrproject-rtos/zephyr/pull/5750 works as follows:
static addresses are configured after boot, and DHCP requests are sent
at the same time. If valid DHCP reply is received, it overrides static
addresses.

This setup works out of the box for both direct connection to a
workstation (DHCP server usually is not available) and for connection
to a router (DHCP is available and required).
 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
0e52ee957d zephyr/modzsensor: Zephyr sensor subsystem bindings. 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
080b0be1c8 zephyr/mpconfigport.h: Enable uhashlib and ubinascii modules. 
To be able to use data integrity checks in various tests.
 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
9480c188e8 zephyr/main: After builtin testsuite, drop to REPL. 
It makes sense to make even testsuite-enabled builds be suitable for
interactive use.
 2018-05-21 10:35:16 +10:00
Paul Sokolovsky
1050045979 zephyr/README: Hint about existence of qemu_x86_nommu. 2018-05-21 10:35:16 +10:00
Tobias Badertscher
769e37b646 stm32/boards: Add config files for new board, STM32L496GDISC. 2018-05-18 22:39:49 +10:00
Tobias Badertscher
4005c63571 stm32/boards: Add board ld and af.csv files for STM32L496 MCU. 2018-05-18 22:39:44 +10:00
Tobias Badertscher
708cdb6276 stm32: Add support for STM32L496 MCU. 2018-05-18 22:37:30 +10:00
Noralf Trønnes
cf33ad9a54 atmel-samd/samd21: Enable long int on Express boards 
This is necessary for using 1970 epoch in the time module.
 2018-05-18 12:35:26 +02:00
Matt Land
06b293af29 pirkey, trinket, ugame 2018-05-17 13:56:10 -04:00
Matt Land
a84845c0ae itsbitsy, metro 2018-05-17 13:48:33 -04:00
Matt Land
173a0a5faa arduino, circuitplayground, feather boards 2018-05-17 13:42:08 -04:00
Matt Land
fc2b4526d3 worked 2018-05-17 13:33:26 -04:00
Matt Land
e1cccd3dac rename to UART 2018-05-17 13:21:15 -04:00
Matt Land
2210fc60b1 Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-default-serial 2018-05-17 13:08:43 -04:00
Matt Land
c846f4bdae remove newline 2018-05-17 12:17:06 -04:00
Matt Land
4fd4adf974 not working 2018-05-17 12:14:51 -04:00
Damien George
58331e3c28 esp8266/modmachine: Allow I2C and SPI to be configured out of the build. 
I2C costs about 3000 bytes of code, and SPI costs about 4400 bytes.
 2018-05-17 23:37:12 +10:00
Damien George
dd13065843 esp8266/modnetwork: Raise ValueError when getting invalid WLAN id. 
Instead of crashing due to out-of-bounds array access.  Fixes #3348.
 2018-05-17 22:12:24 +10:00