djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,488 Commits 21 Branches 274 Tags 785 MiB
2bcc5c06c2
Commit Graph

3323 Commits

Author SHA1 Message Date
Lucian Copeland
c6c77726e7 Merge remote-tracking branch 'upstream/master' into stm32-docfix 2020-04-23 13:39:48 -04:00
Lucian Copeland
8791ca6af3 implement requested changes 2020-04-23 13:33:41 -04:00
hierophect
ead7c6c887
Merge pull request #2785 from k0d/ports_nucleo_f746zg 
STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board
 2020-04-23 12:32:44 -04:00
Mark Olsson
83cc9783cc STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board 2020-04-23 10:48:27 +02:00
Scott Shawcroft
f13de32208
Add HSE_VALUE for STM feather. 2020-04-22 14:37:24 -07:00
Lucian Copeland
d0a2106547 Remove old build flags, add fixes for shared_matrix 2020-04-22 16:06:08 -04:00
Scott Shawcroft
b277944cf0
Fix STM so it matches the correct RTC fields. 2020-04-22 11:10:51 -07:00
Sean Cross
689dd61379 nrf: nrf52833: use s140 v7.0.1 
Previously, we were using v6.1.1 which worked, but was unsupported.
v7.0.1 is the first version of s140 that supports the nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-22 13:34:11 +08:00
Sean Cross
09bef7b0e1 nrf: bluetooth: add s140 v7.0.1 
This is the first version with official support for nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-22 13:33:39 +08:00
Dan Halbert
2f86e31501 fix calculation of nrf firmware size 2020-04-22 00:52:54 -04:00
Dan Halbert
fbc8719fad ringbuf tested 2020-04-21 22:40:12 -04:00
Dan Halbert
77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert
38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Scott Shawcroft
dcb0e50f04
Fix USB midi and hid disable. 2020-04-21 14:15:44 -07:00
Scott Shawcroft
5cc8a3ec82
Add back fake us delay. 2020-04-21 14:14:49 -07:00
Scott Shawcroft
17d038830d
Use our own flag for board crystal config. 2020-04-21 14:14:30 -07:00
Sean Cross
c04e6d6f52 nrf: bleio: parameterize softradio configuration 
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations.  If a
parameter is unspecified then the previously-defined value is used.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:59 +08:00
Sean Cross
3537ad4059 nrf: mpconfigport: support configuration of various sizes 
Conditionally set variables such as the softdevice RAM size, bootloader
size, and the spi m3 buffer size.  This allows ports to adjust these
values to suit their needs.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:58 +08:00
Sean Cross
33720af0c6 nrf: mpconfigport: subtract config size from firmware size 
The BLE Config area needs to be subtracted from the size of the firmware.
THis is because the firmware is counted by walking backwards from the end
of memory, and the BLE config area is placed lower in memory than the
firmware.  Subtracting the BLE config size ensures the internal flash
filesystem doesn't try to use the firmware as storage.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:57 +08:00
Sean Cross
3ed5b87b8f nrf: add support for nrf52833 
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:56 +08:00
Sean Cross
4ad1cbeea3 nrf: make rgbmatrix and framebufferio optional 
Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0
in their .mk file in order to prevent these from being built.  This
is necessary for resource-constrained devices.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 10:44:21 +08:00
Sean Cross
066f486b28 nrf: supervisor: support building without BUSIO 
Only initialize i2c, spi, and uart if building with BUSIO.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 10:44:20 +08:00
Sean Cross
ac9d336f40 nrf: make neopixel support optional 
Add a conditional around the call to neopixel_write(), allowing us
to build for nrf without neopixel support.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 09:56:27 +08:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power 
This isn't perfect and needs a bit more testing.
 2020-04-20 18:25:13 -07:00
Scott Shawcroft
a4d86b96fd
Merge pull request #2777 from pewpew-game/master 
Fix RGB/BGR colors in Stage
 2020-04-20 15:25:29 -07:00
Mark Olsson
506f340c7d STM32: f767: Fixes linker settings. 2020-04-20 19:15:18 +02:00
Jeff Epler
5fcc6d6286 RGBMatrix: finish renaming from Protomatter 
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
 2020-04-17 18:44:07 -05:00
Jeff Epler
3d6258f63d Rename Protomatter -> RGBMatrix 
This is a quick rename, it changes the user-facing names but not the
internal names of things.
 2020-04-17 18:43:57 -05:00
Jeff Epler
a32337718d Rename _protomatter -> protomatter 
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
 2020-04-17 18:43:57 -05:00
Scott Shawcroft
7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
hierophect
1a71c8c515
Merge pull request #2735 from hierophect/stm32x7-setup 
STM32: Add F7 and H7 Support
 2020-04-17 13:02:09 -04:00
Radomir Dopieralski
43022d8294 Add copyrights to pewpew m4 and ugame board.c 2020-04-17 09:50:11 +02:00
Lucian Copeland
9e49fc13f4 startup file crash fix, H7 bin fix 2020-04-16 17:33:48 -04:00
Scott Shawcroft
5b0d9bdeb0
Update copyright to bump the CI 2020-04-16 14:21:26 -07:00
Scott Shawcroft
b3552efc76
Remove accidental file 2020-04-16 11:28:01 -07:00
Sean Cross
61f777c9c6 litex: enable binascii and ujson modules 
Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 10:02:08 +08:00
Sean Cross
bb527ac9ea litex: disable minimal build 
Manually specify available modules and disable any modules
that are currently unsupported on the litex target.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 09:26:08 +08:00
Sean Cross
db3933429a litex: add os module 
Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 09:26:08 +08:00
Sean Cross
6885ffc9af litex: mphalport: add fake mp_hal_delay_us 
Add a mp_hal_delay_us, which is required by some of the modules,
that simply calls mp_hal_delay_ms / 1000.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-16 09:26:08 +08:00
Radomir Dopieralski
f39ca6052e Fix RGB/BGR colors in Stage 
This makes the colors used by the stage library compatible with those
used by the displayio library.
 2020-04-15 23:41:38 +02:00
Lucian Copeland
00b2e6a1db Fix korea translation error, minor submodule change 2020-04-15 13:11:14 -04:00
Lucian Copeland
54abfc2e8b translations-merge 2020-04-15 10:29:05 -04:00
Lucian Copeland
6427994b14 Implement requested changes 2020-04-15 10:22:51 -04:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Scott Shawcroft
7dfcae6067
Tweaks from jepler 2020-04-14 17:09:48 -07:00
Jeff Epler
23bced26da samd: actually disable protomatter timer 
Just setting the timer handler to NO_INTERRUPT doesn't stop the
interrupt from occurring.
 2020-04-14 18:24:58 -05:00
Jeff Epler
759fdffda5 Update ports/atmel-samd/boards/pyportal_titano/board.c 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-04-14 18:24:58 -05:00
Jeff Epler
1d8a073c05 nrf: protomatter port 2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Jeff Epler
a51d4f7a45 pycubed: add trailing newline to file 
POSIX specifies that text files end in a trailing newline
 2020-04-14 18:24:54 -05:00
Jeff Epler
db01f88cc3 enable MICROPY_PY_REVERSE_SPECIAL_METHODS where ulab is enabled 2020-04-13 19:58:52 -05:00
Lucian Copeland
83a55f65a4 Implement cache-based reads 2020-04-13 15:14:38 -04:00
Lucian Copeland
426d2afe28 Fix pin mapping for the H7 Nucleo 2020-04-13 14:36:49 -04:00
Lucian Copeland
6227e63cc5 Merge remote-tracking branch 'upstream/master' into stm32x7-setup 2020-04-13 12:03:56 -04:00
Lucian Copeland
5ac38c95cc Various requested fixes 2020-04-13 12:03:05 -04:00
Sabas
cac4fb0318
Merge branch 'master' into nfc_copy 2020-04-09 17:05:11 -05:00
sabas1080
49771b4d7f Update to v1.3 2020-04-09 14:27:51 -05:00
Lucian Copeland
92a0621e59 Add busio support, cleanup 2020-04-09 13:43:19 -04:00
Scott Shawcroft
01941c027b
Fix up STM 
Enable the Alarm IRQ earlier and correct bit clearing.
 2020-04-08 14:41:57 -07:00
Scott Shawcroft
d0a25ca9ac
Tweaks based on dhalberts feedback 2020-04-08 10:49:46 -07:00
Max Holliday
181ecf4a9b fixing my goofy CROSS_COMPILE fix 2020-04-07 21:54:46 -07:00
Max Holliday
a53a26be70 missed a debug flag 2020-04-07 18:24:53 -07:00
Max Holliday
826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft
6544bf52fb
Enable SNVS interrupt 
The iMX RT has a separate wake up controller, the GPC, that replaces
the NVIC when asleep. It adds the ability to only wake up on certain
interrupts. It seems that it requires at least one enabled interrupt
in the NVIC to turn on it's wake up circuitry. It doesn't need to
be the same interrupt as the wake up signal. For example, the RTC
in the SNVS can wake us up if a USB interrupt is enabled. Before
then it won't work. So, we enable the SNVS interrupt on start up
so it can wake us up.
 2020-04-07 17:15:18 -07:00
Scott Shawcroft
aae0ce6bad
Fix autoreload and ticks on IMX RT 2020-04-07 14:16:07 -07:00
Scott Shawcroft
a8dfba235c
Fix alarm so that it is correctly set. 2020-04-07 13:07:29 -07:00
Scott Shawcroft
c0ba2a839f
Updates based on feedback from jepler 2020-04-06 16:03:31 -07:00
arturo182
08f369ea96 mimxrt1011: Only re-init SPI when it's actually needed 
If some crazy code (*cough* FourWire) decides to reconfigure the bus
before every transfer, it might get a bit slow...
 2020-04-06 22:10:12 +02:00
Scott Shawcroft
e99cf6e441
Rework sleep timing 
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
 2020-04-03 18:07:56 -07:00
Scott Shawcroft
7e69d30c02
Fix nRF PulseIn 2020-04-03 14:22:56 -07:00
Lucian Copeland
9761672d42 Linker file restructure, TCM and MPU additions 2020-04-03 16:33:18 -04:00
Scott Shawcroft
46af4bdd0e
Fix SAMD21 PulseIn 2020-04-02 17:35:52 -07:00
Lucian Copeland
47a5d83267 Implement F7 Nucleo 2020-04-02 11:47:16 -04:00
Sean Cross
9845a064ad ports: fomu: move more functions into ram for stability 
The SPI flash on current Fomu firmware is slow.  Circuitpython runs
XIP from SPI flash, and so execution time can also be slow.  Ordinarily
this isn't a problem, however certain operations are time-sensitive.

In particular, USB function needs to be handled quickly in order to
prevent the host from re-enumerating the device.

Place several critical TinyUSB structures into RAM, as well as several
hot functions that are frequently called.  This reduces execution time
at the expense of system memory, and greatly improves system stability.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-02 11:21:22 +08:00
Lucian Copeland
2f764ded63 merge and docs 2020-04-01 13:52:53 -04:00
Lucian Copeland
a89928c13c Implement requested changes 2020-04-01 13:02:05 -04:00
Scott Shawcroft
77562a2acd
Update the supported ports 2020-03-31 18:27:55 -07:00
Scott Shawcroft
75b7f583d2
Update LiteX APIs for new tick 2020-03-31 17:52:23 -07:00
Scott Shawcroft
1071924701
Fix thunderpack build 2020-03-31 17:05:37 -07:00
Scott Shawcroft
317b96e93a
Fix iMX builds 2020-03-31 17:00:30 -07:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Scott Shawcroft
4b063aeb29
Hack up STM32 PulseIn so it builds 2020-03-31 15:12:11 -07:00
Scott Shawcroft
f47b964c5f
Merge pull request #2726 from xobs/fomu-circuitpython 
ports: litex: add port and fomu board
 2020-03-31 13:51:09 -07:00
Scott Shawcroft
cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server 
Fix PacketBuffer server support
 2020-03-31 13:39:34 -07:00
Sean Cross
c69f7f8657 ports: litex: use dfu.py instead of dfu-suffix.py 
dfu.py now generates proper dfu suffixes without the nonstandard prefix.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 13:04:59 +08:00
Sean Cross
34ea140783 ports: fomu: build dfu as part of Makefile 
Now that we have a replacement for `dfu-suffix`, construct a dfu
image rather than a UF2 image.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 11:42:55 +08:00
Sean Cross
065441e58c ports: litex: enable itcm region for fomu 
This adds a new command line flag -DFOMU to indicate we're building
for a Fomu board.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 09:40:38 +08:00
Sean Cross
786e79ebc9 ports: litex: add port and fomu board 
This adds support for Litex, along with support for the Fomu FPGA board.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-03-31 09:40:38 +08:00
Scott Shawcroft
e8cffcf978
Merge pull request #2740 from arturo182/mimxrt10xx_neopixel 
mimxrt10xx: Fix neopixel_write
 2020-03-30 17:49:14 -07:00
arturo182
13022be299 mimxrt10xx: Fix neopixel_write 2020-03-31 01:05:03 +02:00
Brian Dean
7cfa8e1a68 board_vina_m0:pins.c: PGM_LED is on PA28 not PA15. 2020-03-29 18:59:00 -04:00
Lucian Copeland
e2be069686 Support cached internal flash on the H743 2020-03-28 18:30:46 -04:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity 
Add polarity and phase to FourWire.
 2020-03-28 07:28:37 -05:00
Scott Shawcroft
a4a458943d
Correct MIMXRT sdk version 2020-03-27 15:40:17 -07:00
Scott Shawcroft
798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft
e4c4a4a3de
Swap to committed dependencies 2020-03-27 14:39:59 -07:00
Scott Shawcroft
b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
Lucian Copeland
7995bcac40 Flash additions 2020-03-27 14:15:33 -04:00
Brian Dean
7fa38e8725 Update board name to bdmicro_vina_m0 to eliminate hyphens. 2020-03-27 13:37:59 -04:00
Brian Dean
14a1e5756e Merge branch 'master' of https://github.com/adafruit/circuitpython 2020-03-26 20:28:54 -04:00
Brian Dean
2ae9edcbff Add new board BDMICRO 'Vina M0'. 
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c

This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.

Has been extensively tested with CircuitPython and works well.
 2020-03-26 20:15:54 -04:00
Lucian Copeland
348df4be2b Merge remote-tracking branch 'upstream/master' into stm32x7-setup 2020-03-26 18:16:11 -04:00
Lucian Copeland
c4db8b87e2 Add F7 and H7 Support to the STM32 port 
Restructures the STM port of Circuitpython to be more generic about the STM32 chip lines to support
the F7 and H7 series of chips. Adds the new Packages directory to organize different chip layouts
between lines. Makes general changes to the Makefile to condense board-level flags to the minimum
and support the new chip series. Adds the new chip line to the Peripherals directory, along with
new python tools used to generate peripheral text automatically in the tools/ directory.
 2020-03-26 18:01:17 -04:00
Scott Shawcroft
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight 
Add backlight polarity flag to Display
 2020-03-26 14:00:47 -07:00
Scott Shawcroft
3959548054
Merge pull request #2734 from theacodes/add-flash-for-sol 
Add GD25Q64C as a flash chip for Sol
 2020-03-26 13:27:56 -07:00
Thea Flowers
ff67571e9a Add GD25Q64C as a flash chip for Sol 2020-03-26 12:33:27 -07:00
siddacious
9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
siddacious
7bba79363a allowing backlight change 2020-03-25 22:41:23 -07:00
Scott Shawcroft
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling 2020-03-25 17:41:47 -07:00
arturo182
18c12e7822 mimxrt10xx: Return proper UART read length when everything was read 2020-03-26 00:15:48 +01:00
Scott Shawcroft
3551b769a2
Fix connection handle tracking in PacketBuffer when a server. 2020-03-25 13:31:18 -07:00
Scott Shawcroft
59eb35da30
Merge pull request #2727 from burtyb/commander-1 
Add support for Commander
 2020-03-25 11:00:11 -07:00
Scott Shawcroft
ea0ce39962
Simplify STM a bit. 2020-03-24 15:49:24 -07:00
Scott Shawcroft
5e1e4d32db
Get basic sleep going on the iMX RT 1011 2020-03-24 15:46:10 -07:00
Chris Burton
5e559be9b5 Remove Adafruit_CircuitPython_CircuitPlayground 2020-03-24 21:10:34 +00:00
Scott Shawcroft
f414f2b588
Merge pull request #2723 from jgillick/jgillick/circuitpython/stm32f411 
Add new STM board: Thunderpack
 2020-03-24 12:27:20 -07:00
William Moser
c961ed9025 Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files 2020-03-24 13:25:02 -04:00
jgillick
8ed4deee9d Rename pins 2020-03-23 23:06:55 -07:00
Scott Shawcroft
a8ed6d993c
Switch iMX RT to RTC. Untested. 2020-03-23 18:20:58 -07:00
Scott Shawcroft
653b7619ec
Add back microsecond delay to STM32 2020-03-23 16:09:50 -07:00
Scott Shawcroft
c0c4c4403a
Factor out stm32f4xx_hal_conf.h 2020-03-23 14:46:25 -07:00
jgillick
29ce756709 PR feedback. 2020-03-22 18:41:19 -07:00
jgillick
a79ac35173 Rename NVM_BYTEARRAY_BUFFER_SIZE 2020-03-22 15:20:58 -07:00
jgillick
68195a8dfe Update NVM_BYTEARRAY_BUFFER_LEN 2020-03-22 15:19:53 -07:00
Chris Burton
39a19d54c2 Add support for Commander 2020-03-22 16:23:56 +00:00
jgillick
d76b76cb1d Add non-volatile memory support to STM 2020-03-22 02:22:59 -07:00
jgillick
c62b724b24 Merge remote-tracking branch 'circuitpython/master' into jgillick/circuitpython/stm32f412c 2020-03-21 23:36:15 -07:00
Scott Shawcroft
2623022c84
Initial work for STM32. Need to fix us delay and PulseIn still. 2020-03-20 12:58:34 -07:00
jgillick
d9e491a9e8 Remove unnecessary change 2020-03-19 00:02:23 -07:00
jgillick
284073584a Cleanup 2020-03-19 00:01:32 -07:00
jgillick
9be2ab6008 Change the board to use an STM32F411 chip. 2020-03-18 23:55:18 -07:00
Scott Shawcroft
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button 
Add board support for Winterbloom Big Honking Button
 2020-03-18 17:37:59 -07:00
Thea Flowers
e027aaf433 Remove some build options, fix order of boards in build.yml 2020-03-18 16:49:10 -07:00
Thea Flowers
7332adfa21 Add board support for Winterbloom Big Honking Button 2020-03-18 16:29:44 -07:00
jgillick
679314a22e Fix disable VBUS sensing. 2020-03-18 00:35:20 -07:00
Scott Shawcroft
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab 
update ulab
 2020-03-17 15:33:08 -07:00
Scott Shawcroft
6db11cf68b
Fix up Spresense build. It doesn't sleep. 2020-03-17 14:21:45 -07:00
Scott Shawcroft
d9e68156b2
fix up SAMD21 sleep 2020-03-17 12:10:35 -07:00
Jeff Epler
d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
jgillick
24d1fd2bf1 PR Cleanup. 2020-03-17 00:48:19 -07:00
jgillick
d41ef45a9b Update clock. 2020-03-17 00:36:18 -07:00
jgillick
cbc0e0344d Revert changes to system_stm32f4xx.c 2020-03-17 00:36:12 -07:00
jgillick
07549b7fd9 Bring back trimmed spaces. 2020-03-17 00:27:04 -07:00
Scott Shawcroft
c8d9edd939
Merge pull request #2705 from NightSkySK/UARTlogger2 
add UARTLogger2 board support for CircuitPython
 2020-03-16 16:28:42 -07:00
Lucian Copeland
bb3ed3a827 Merge branch 'master' into stm32x7-setup 2020-03-16 12:37:53 -04:00
jgillick
8a93a81a26 Chip specific code. 2020-03-15 22:31:36 -07:00
jgillick
5dbdf72472 Fix LED port. 2020-03-15 19:36:16 -07:00
jgillick
f884c2b9b6 Incremental update 2020-03-15 19:34:41 -07:00
jgillick
6f153804da Add initial thunderpack port files. 2020-03-14 00:03:14 -07:00
Scott Shawcroft
76ca13b6ed
Fix SAMD51 pulsein 2020-03-13 17:21:15 -07:00
Scott Shawcroft
7100d5e485
Fix autoreload and ticks in general 2020-03-13 16:13:24 -07:00
Scott Shawcroft
df5be65423
Update FrequencyIn for new clock API. 2020-03-13 16:12:52 -07:00
Szymon Klause
c9aa50817c add UARTLogger2 board support for CircuitPython 2020-03-13 21:39:17 +01:00
Scott Shawcroft
4fba4eb133
Switch from 1k RTC input to 32k output 2020-03-13 11:16:41 -07:00
Scott Shawcroft
48b5f2a384
Initial work on SAMD 2020-03-13 11:16:41 -07:00
Scott Shawcroft
affd3fcc2a
Clear the pending IRQ in the NVIC as well. 2020-03-13 11:16:38 -07:00
Scott Shawcroft
00d5f63e7c
Hopefully fix PulseIn 2020-03-13 11:12:31 -07:00
Scott Shawcroft
ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well. 2020-03-13 11:12:31 -07:00
Scott Shawcroft
418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD 2020-03-13 11:12:31 -07:00
Scott Shawcroft
6f60afe8c5
First try at lowering the power consumption 2020-03-13 11:12:30 -07:00
Scott Shawcroft
3a5f79acef
Merge pull request #2701 from hierophect/stm32-submodule-swap 
STM32: Change ST drivers submodule to match TinyUSB
 2020-03-13 10:47:54 -07:00
Scott Shawcroft
85f44e20cb
Merge pull request #2695 from TG-Techie/master 
Add new TG-Watch02A to the nrf boards directory
 2020-03-13 10:46:48 -07:00
Lucian Copeland
ef7370d023 Change ST drivers submodule to match TinyUSB 2020-03-12 17:14:09 -04:00
Lucian Copeland
18442c5b00 Merge remote-tracking branch 'upstream/master' into stm32-port-namechange 2020-03-12 15:40:44 -04:00
Lucian Copeland
0155fab356 Revise style on interrupt handler functions 2020-03-12 15:03:47 -04:00
Lucian Copeland
bb167f04fa WIP 2020-03-12 14:54:43 -04:00
Lucian Copeland
ead32ea6e6 Comment change for CI 2020-03-12 11:21:32 -04:00
TG-Techie
197dc344af fix requested changes 2020-03-12 02:31:13 -04:00
Lucian Copeland
127e531271 remove old directory 2020-03-11 18:16:52 -04:00
Lucian Copeland
be7def128a submodule move and sync 2020-03-11 18:16:16 -04:00
Lucian Copeland
53b1544f41 create copy 2020-03-11 18:13:06 -04:00
Lucian Copeland
38064750f9 Merge remote-tracking branch 'upstream/master' into stm32-pulsein 2020-03-11 16:39:11 -04:00
Lucian Copeland
2b161d37df stm32: add PulseIn module 2020-03-11 16:37:40 -04:00
TG-Techie
b967a2071f changed TG-Watch02A HW_BOARD_NAME 2020-03-10 23:07:25 -04:00
TG-Techie
50b451ae0c add TG-Watch02A board def 2020-03-10 22:40:55 -04:00
Dan Halbert
6363b5ad06
Merge pull request #2693 from jepler/ulab-enable 
ulab: enable on most builds
 2020-03-10 09:48:46 -04:00
Jeff Epler
03a2b2faf1 ulab: don't enable on m0 boards 2020-03-09 23:00:21 -05:00
Jeff Epler
66aa0dec60 stm32: enable ulab 
This is needed because stm32 defines CIRCUITPY_MINIMAL_BUILD "for early
port".
 2020-03-09 15:54:40 -05:00
Jeff Epler
e128d770f1 cdx56: prepare to enable ulab 
This involves fixing support for SRC_MOD and enabling INTERNAL_LIBM
including adding support for SRC_LIBM.
 2020-03-09 15:54:40 -05:00
TG-Techie
fec84054d9 ah 2020-03-06 15:03:37 -05:00
TG-Techie
7198056bc3
Merge pull request #2 from adafruit/5.0.x 
5.0.x
 2020-03-06 13:57:31 -05:00
TG-Techie
03dfd28121 trying to pull 5.0.x 2020-03-06 13:52:47 -05:00
Dan Halbert
210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Thea Flowers
409a4a9490 Disable the HID USB descriptor for Sol 
It's not used and ends up being confusing for folks.
 2020-03-04 23:22:46 -08:00
Scott Shawcroft
b4e1955526
Merge pull request #2583 from jepler/ulab 
Add 'ulab' as an extmod; enable on nrf and most samd51 boards
 2020-03-04 11:46:17 -08:00
Scott Shawcroft
4aec5d1e83
Merge pull request #2680 from hierophect/stm32-clock-hotfix 
STM32: Fix restriction on GPIO clock enables for F407 Discovery board
 2020-03-04 11:43:33 -08:00
Jeff Epler
da31acfcc4 Merge remote-tracking branch 'origin/master' into ulab 2020-03-03 20:13:53 -06:00
Lucian Copeland
55e13715a9 Expand GPIO clock enables for F405 and F407 2020-03-03 17:21:47 -05:00
hierophect
3178462218
Merge branch 'master' into stm32-pulseout 2020-03-03 15:03:19 -05:00
Scott Shawcroft
2fea811c30
Merge pull request #2672 from jepler/fuzz 
Makefiles: add targets to build unix port, mpy-cross for fuzzing
 2020-03-03 11:36:53 -08:00
Scott Shawcroft
17458ad81a
Merge pull request #2662 from jepler/issue2332 
Fix unaligned disk reads properly
 2020-03-03 11:27:50 -08:00
Lucian Copeland
eb71bfe9d3 Exclude SoCs without basic timers 2020-03-02 11:22:40 -05:00
Jeff Epler
74bf17bb0d Makefiles: add targets to build unix port, mpy-cross for fuzzing 
This assumes you have properly install afl-fuzz with afl-clang-fast.
Tested with AFLplusplus 2.60c-75-g2c6847b.
 2020-03-01 11:48:33 -06:00
Jeff Epler
dc64857a7d
Merge branch 'master' into ulab 2020-02-29 21:54:39 -06:00
Dan Halbert
8435935429 update uses of assert_pin_free; remove redundant checks 2020-02-29 15:37:32 -05:00
Lucian Copeland
611ef27ac2 stm32: Add PulseOut support 
Matches the implementations of the NRF and Atmel ports. TIM7 is used as it does not have a tied pin. Contains some register micromanagement since HAL support for the TIM7 timer is limited.
 2020-02-29 14:47:47 -05:00
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
arturo182
0af00cf914 Freeze adafruit_requests and adafruit_esp32spi into feather_m7_1011 2020-02-29 00:39:22 +01:00
arturo182
3f26a0b06b Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011 2020-02-29 00:26:39 +01:00
Jeff Epler
eef742bf45 oofatfs: Remove _FS_DISK_READ_ALIGNED 
This workaround is no longer needed, so it can be removed.

Closes: #2332
 2020-02-28 10:04:28 -06:00
Jeff Epler
1e6c08fc30 nrf: sqpi_flash: Handle unaligned reads 2020-02-28 10:03:37 -06:00
TG-Techie
527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie
6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
Jeff Epler
fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
Jeff Epler
4c710cf13b unix port: add help(), help('modules') 2020-02-27 08:31:01 -06:00
Dave Marples
09a3153bf4 Fix I2C clock divider 2020-02-27 14:08:39 +00:00
arturo182
1b33cd11fc
Merge pull request #2658 from mubes/spi_fixes 
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixups
 2020-02-26 16:37:05 +01:00
Dave Marples
aadb0bfc1e Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixup 2020-02-26 14:28:54 +00:00
ladyada
86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
jepler
f20255813f samd51 thing plus: new port 
testing performed:
 * successfully store and retrieve a 500kB file on the flash
 * square wave output on each pin appears on o'scope
 * board.SPI(), board.SERIAL(), board.I2C() all construct
 2020-02-25 11:52:23 -06:00
Scott Shawcroft
28c7a1e9c3
Fix crash after empty REPL session 
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
 2020-02-24 16:11:17 -08:00
Dan Halbert
dcc8abf74e
Merge pull request #2638 from fgallaire/master 
Arduino Nano 33 IoT support
 2020-02-22 00:12:06 -05:00
Florent Gallaire
96db16a7a2 Last NINA pins 2020-02-22 04:30:18 +01:00
Dan Halbert
f63b2c0d0c use realloc instead 2020-02-21 17:36:15 -05:00
Dan Halbert
9cf46ec947 put neopixel_write buffer in root pointers 2020-02-21 08:44:25 -05:00
Dan Halbert
23d6a3dc1f merge from upstream 2020-02-20 22:27:16 -05:00
Florent Gallaire
39ec5d0e51 Add NINA pins 2020-02-21 01:34:52 +01:00
Dan Halbert
634d246910 relicense nrf SPI.c to MIT 2020-02-20 16:00:21 -05:00
Scott Shawcroft
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011 
mimxrt10xx: Add Feather M7 1011 board config
 2020-02-20 10:15:57 -08:00
arturo182
feac87901a mimxrt10xx: Enable displayio 
Closes #2466
 2020-02-19 22:26:00 +01:00
arturo182
aa0cf38084 mimxrt10xx: Add Feather M7 1011 board config 2020-02-19 22:08:08 +01:00
Scott Shawcroft
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485 
Addition of RTS/CTS/RS485 capability
 2020-02-19 10:35:57 -08:00
Florent Gallaire
fba0b302ff Add Arduino Nano 33 IoT support 2020-02-19 08:56:06 +01:00
Florent Gallaire
63bcd52a5a Add Arduino Nano 33 IoT documentation 2020-02-19 08:50:27 +01:00
Dan Halbert
1f148242db
Merge pull request #2605 from maholli/master 
New board: PyCubed + updates to SAM32 board
 2020-02-18 22:01:41 -05:00
Dave Marples
24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Dave Marples
f0e5341b0f Addition of support for imxt1010, 1050 and 1060 families 2020-02-18 23:16:40 +00:00
Dave Marples
d388899985 Addition of RS485 support 2020-02-18 23:16:40 +00:00
Dave Marples
84ad3d8393 Addition of RTS/CTS/RS485 UART functionality 2020-02-18 23:16:40 +00:00
Max Holliday
2b79d8ffe9 adding PWM to board.c for external WDT 2020-02-18 14:16:54 -08:00
Scott Shawcroft
2063867899
Merge pull request #2618 from mubes/alignment-warning 
Fix alignment warning
 2020-02-18 13:54:24 -08:00
Max Holliday
93760042fa no current need for NVM 2020-02-16 11:43:19 -08:00
Dave Marples
77ad9aff3c Formatting updates 2020-02-16 00:40:04 +00:00
Dave Marples
d13f04f953 Updated formatting 2020-02-14 23:02:02 +00:00
Dan Halbert
dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Scott Shawcroft
a0760206c6
Merge pull request #2597 from hierophect/stm32-espruino-wifi 
STM32: Espruino Wifi
 2020-02-13 11:17:59 -08:00
Dan Halbert
a65ca3ab19
Merge pull request #2617 from dhalbert/nrf-large-spi-transactions 
use properly-sized SPI transactions
 2020-02-12 23:29:29 -05:00
Dave Marples
4de2a1eb62 Fix alignment warning 2020-02-12 22:36:34 +00:00
Lucian Copeland
afc1c88046 remove bad define 2020-02-12 15:56:24 -05:00
Lucian Copeland
fd2982f5c9 revert cross-board flag strategy 2020-02-12 15:12:05 -05:00
Dan Halbert
e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Lucian Copeland
6d91ed2156 move defaults to avoid conflict 2020-02-12 14:38:27 -05:00
Lucian Copeland
b248486c3b cleanup flag changes 2020-02-12 14:32:50 -05:00
Lucian Copeland
b7bb85a4da Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi 2020-02-12 14:31:08 -05:00
Lucian Copeland
7831c475b9 change flag styling 2020-02-12 14:30:29 -05:00
Scott Shawcroft
35abc48a65
Merge pull request #2589 from hierophect/stm32-temperature-us 
STM32: Core temperature and voltage
 2020-02-12 10:55:00 -08:00
Scott Shawcroft
01507a91db
Merge pull request #2612 from mubes/loadable-binary 
Add directly loadable binary target for imxrt family
 2020-02-12 10:41:59 -08:00
hierophect
4bc093675c
Merge branch 'master' into stm32-temperature-us 2020-02-12 12:13:56 -05:00
Dave Marples
d0870ce484 Update main .bin output file to be bootable artefact 2020-02-12 09:03:11 +00:00
Dan Halbert
2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Dave Marples
f3e4fbd7ba Add directly loadable binary target 2020-02-11 23:01:08 +00:00
Scott Shawcroft
8364c60eb2
Merge pull request #2570 from hierophect/stm32-f407-disco 
STM32: Add STM32F4Discovery support
 2020-02-10 17:19:00 -08:00
Lucian Copeland
c4436910c3 create F407 specific files 2020-02-10 12:44:23 -05:00
Max Holliday
80ba4c8661
Merge pull request #2 from adafruit/master 
merging from upstream
 2020-02-10 09:41:16 -08:00
Lucian Copeland
3f700e7e68 fix missing parameter 2020-02-10 12:16:00 -05:00
Lucian Copeland
b4c60c3355 Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi 2020-02-10 11:52:32 -05:00
Lucian Copeland
baf8d9ef5f Merge remote-tracking branch 'upstream/master' into stm32-temperature-us 2020-02-10 11:45:49 -05:00
Drew Fustini
3bf4b42e2e change OH20 badge pin defs to use SWn for buttons 
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
 2020-02-10 00:49:13 +01:00
Drew Fustini
0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
Max Holliday
b91c4e66cb adding Adafruit_CircuitPython_Register to frozen + updating SAM32 2020-02-08 16:09:47 -08:00
Max Holliday
84fa0c187e adding new board - PyCubed 
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
 2020-02-08 15:33:25 -08:00
hierophect
b93d6e861b
Merge pull request #2596 from hierophect/stm32-espruino-pico 
STM32: Espruino Pico
 2020-02-07 14:14:49 -05:00
Scott Shawcroft
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement 
Monotonic ns improvement; time.sleep rounds to nearest msec
 2020-02-07 11:03:37 -08:00
Limor "Ladyada" Fried
71672fd244
Merge pull request #2599 from ladyada/master 
update rotation so 0 is the default, for much faster ondiskbitmaps
 2020-02-07 12:59:30 -05:00
Dan Halbert
b245f9ca5b
Merge pull request #2591 from neubauek/master 
Added CircuitBrains Basic and Deluxe Boards
 2020-02-07 12:47:20 -05:00
Dan Halbert
005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert
857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Lucian Copeland
41b5f73785 revert mixed up linkers 2020-02-06 18:47:06 -05:00
Lady Ada
789e311b63 update rotation so 0 is the default, for much faster ondiskbitmaps 2020-02-06 16:28:02 -05:00
neubauek
d93d491a61 Cleaned up CircuitBrains Basic and Deluxe board definitions 2020-02-06 14:47:22 -06:00
Lucian Copeland
848577e830 Update PID 2020-02-06 12:55:36 -05:00
Lucian Copeland
aee26b1c79 Add proper PID 2020-02-06 12:25:17 -05:00
Lucian Copeland
4122f85888 Create board definitions, add to board list 2020-02-06 12:19:19 -05:00
Lucian Copeland
383854ac50 Add espruino pico to board list 2020-02-06 11:25:07 -05:00
Lucian Copeland
08cf152aa8 Document flashing process 2020-02-06 11:11:51 -05:00
Lucian Copeland
698ad745f6 Fix oscillator issue, add button and LED pins 2020-02-06 10:49:03 -05:00
Dan Halbert
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error 
Add another error message to BLE
 2020-02-05 23:39:17 -05:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
Scott Shawcroft
72a1bdab30
Add another error message for extended advertisements at the same 
time as scan response. The SD can't do it.
 2020-02-05 15:56:17 -08:00
Lucian Copeland
cdd1622350 Fix oscillator oversight in clocks.c 2020-02-05 18:12:48 -05:00
Lucian Copeland
e28d244a0d Add espruino pico pinout 2020-02-05 18:03:54 -05:00
neubauek
f3188669e4 Added CircuitBrains Basic and Deluxe Boards 2020-02-05 14:52:47 -06:00
Lucian Copeland
788464a594 board uses VBUS 2020-02-05 15:45:27 -05:00
Lucian Copeland
cedf6489f7 Add voltage ADC, standardize mphalport 2020-02-05 12:39:12 -05:00
Dan Halbert
b6da2fa173 nrf: fix i2c frequency setting 2020-02-05 11:25:31 -05:00
Lucian Copeland
4ba050d46d Add ADC for temp sensor 2020-02-04 16:26:24 -05:00
Scott Shawcroft
65045eb3bc
Merge pull request #2568 from hierophect/stm32-loader-linkers 
STM32: UF2 build option for STM32F405
 2020-02-04 12:21:45 -08:00
Lucian Copeland
6f73126756 add correct PID 2020-02-04 10:46:44 -05:00
Lucian Copeland
c1fded5062 Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-02-04 10:40:19 -05:00
Lucian Copeland
3ce6fc89a4 Implement new linker for external flash only 2020-02-04 10:38:45 -05:00
Dan Halbert
a4ebd2f7c1 allow tuple or list for Palette color 2020-02-03 22:09:53 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Lady Ada
5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling
64cafe82bc Adjust OHS2020 madctl for default rotation 
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:14:10 -08:00
Michael Welling
6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:39 -08:00
Michael Welling
33dcdd7c03 Updates to enable working SPI TFT 
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:03 -08:00
Michael Welling
d99c2ffe4f QSPI flash fixes 
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:11:12 -08:00
Lady Ada
dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Lucian Copeland
fa11912b9b New configuration values 2020-01-31 17:28:42 -05:00
Lucian Copeland
61944ef08e Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-01-31 16:38:17 -05:00
Dan Halbert
8258cb851e
Merge pull request #2569 from dhalbert/nrf-increase-connections 
increase max BLE connections from 2 to 5
 2020-01-31 15:59:27 -05:00
Dan Halbert
4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Lucian Copeland
cabc3aa90e Merge branch 'stm32-loader-linkers' of https://github.com/hierophect/circuitpython into stm32-loader-linkers 2020-01-31 14:36:03 -05:00
Lucian Copeland
41aefc819b Fix pyboard 2020-01-31 14:35:54 -05:00
Lucian Copeland
19553b8f7c WIP 2020-01-31 14:33:10 -05:00
Lucian Copeland
c1cf80180d Merge branch 'stm32-loader-linkers' into stm32-f407-disco 2020-01-31 14:10:21 -05:00
Lucian Copeland
ab031bc25f Create basic board profile 2020-01-31 14:04:54 -05:00
hierophect
f38e12f0ab
Update ports/stm32f4/boards/STM32F405_boot.ld 
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
 2020-01-31 13:56:08 -05:00
Lucian Copeland
a10e5d1da2 text fixes 2020-01-31 13:17:43 -05:00
Lucian Copeland
7085d91278 dangling edit 2020-01-31 13:13:51 -05:00
Lucian Copeland
b4dcecb266 Add build option for UF2 flash offset 2020-01-31 13:12:58 -05:00
Lucian Copeland
d8016bd52b Merge branch 'master' into stm32-loader-linkers 2020-01-31 12:21:46 -05:00
Dan Halbert
3b95d7c16a add gamepad to specialty cpx builds; update frozen libs 2020-01-30 21:00:47 -05:00
Dan Halbert
b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Scott Shawcroft
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf 2020-01-30 10:59:21 -08:00
Scott Shawcroft
298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes 
nrf: track vm_used_ble better
 2020-01-30 10:33:19 -08:00
Dan Halbert
87f73e2729 track vm_used_ble better 2020-01-30 09:52:06 -05:00
Scott Shawcroft
5d24ade5c9
Tweak error messages to reduce code size. 2020-01-29 17:32:07 -08:00
Lucian Copeland
1a25d3ca83 fix merge issue 2020-01-29 18:46:14 -05:00
hierophect
898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland
100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Lucian Copeland
b9bed98538 Merge stm32-meowbit 2020-01-29 16:05:19 -05:00
Lucian Copeland
8a9c3097e3 Add port-specific requested changes 2020-01-29 16:00:38 -05:00
Lucian Copeland
947c2243bd add feather bootloader settings, cleanup 2020-01-29 15:30:35 -05:00
Lucian Copeland
3c86005546 Implement requested changes 2020-01-28 17:11:25 -05:00
Lucian Copeland
ab9483b7fb Add internal display definitions, fails at startup 2020-01-28 16:00:34 -05:00
Wojtek Siudzinski
df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Scott Shawcroft
eb0ef3726f
Merge pull request #2552 from jepler/samd-stereo-single-dma 
samd: When possible, use one DMA channel for stereo AudioOut
 2020-01-27 14:15:26 -08:00
Scott Shawcroft
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev 
Refine iMX RT memory layout and add three boards
 2020-01-27 14:11:08 -08:00
Jeff Epler
c8f969feb5 samd: audio-dma: avoid memory allocations 
With the previous change, stereo mp3 playback changed from needing
4 2304-byte allocations to needing 2 4604-byte allocations.  This was
enough to cause MemoryErrors with regularity.

By using m_realloc() here, the existing memory region can be used.
m_realloc() also works on the first invocation, because m_realloc(NULL, sz)
just calls m_malloc of sz.
 2020-01-27 08:49:41 -06:00
Lady Ada
f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Jeff Epler
cb6193bbc7 samd: When possible, use one DMA channel for stereo AudioOut 
.. the documentation doesn't make this clear, but in practice it works
to write both of the DATABUF registers at the same time.  This should
also reduce the amount of wear and tear DMA puts on the system, as the
number of transfers is cut in half.  (the number of bytes transferred
remains the same, though)

In principle, this could cover all stereo cases if audio_dma_convert_signed
also learned to 16-bit extend and swap values.  However, this is the
case that matters for stereo mp3 playback on PyGamer.

Testing performed: Listened to some tracks with good stereo separation.
 2020-01-26 15:36:24 -06:00
Lucian Copeland
b5b94b72c1 Return to bootloader options 2020-01-24 14:47:13 -05:00
Lucian Copeland
70932cab42 Simplify the flash-display conflict fix 2020-01-24 14:33:28 -05:00
Lucian Copeland
2afca4e942 Fix flash-display conflict error 2020-01-24 14:25:36 -05:00
Dan Halbert
6f13979c9b pygamer and pybadge boards were not resetting neopixels 2020-01-24 09:32:28 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Lucian Copeland
d8bc57c1dc Flash and display control 2020-01-23 17:17:02 -05:00
Limor "Ladyada" Fried
fe70072d68
Merge branch 'master' into ndbit6 2020-01-23 12:32:19 -05:00
ndgarage
4675783545 change-name-to-ndgarage_ndbit6 2020-01-23 09:55:17 -07:00
Sabas
41a85b71fc init nfc copy 2020-01-22 20:30:33 -06:00
Lucian Copeland
e9f9cee4d6 Invert duty cycle intensity 2020-01-22 18:47:41 -05:00
Lucian Copeland
36792926d2 Revert dangling pointer issue in PWMOut 2020-01-22 14:41:37 -05:00
Lucian Copeland
b326ee0a3d fix microcontroller pin ommission 2020-01-22 12:12:27 -05:00
Scott Shawcroft
085242bf5c
Use new USB PIDs that aren't used yet. 2020-01-21 18:45:00 -08:00
Scott Shawcroft
87344ff53a
Disable the DCache when USB is initialized. There are still issues enabling it. 2020-01-21 18:32:19 -08:00
Dan Halbert
4923caf85e Increase CPX stack size by 256 2020-01-21 18:53:55 -05:00
Chris Osterwood
97420994e8 Merge remote-tracking branch 'origin/master' into capablerobot-usbhub 2020-01-20 13:11:57 -05:00
Scott Shawcroft
1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Scott Shawcroft
9d5742ebd1
Fix start on power up by providing Reset_Handler ourselves. 
On power up the FlexRAM banks are in an unknown config so we can't
rely on the stack until after we configure FlexRAM.
 2020-01-18 11:54:01 -08:00
Scott Shawcroft
9f4ea2122a
teensy fixes 2020-01-17 18:35:09 -08:00
Scott Shawcroft
7d8dac9211
Refine iMX RT memory layout and add three boards 
Introduces a way to place CircuitPython code and data into
tightly coupled memory (TCM) which is accessible by the CPU in a
single cycle. It also frees up room in the corresponding cache for
intermittent data. Loading from external flash is slow!

The data cache is also now enabled.

Adds support for the iMX RT 1021 chip. Adds three new boards:
* iMX RT 1020 EVK
* iMX RT 1060 EVK
* Teensy 4.0

Related to #2492, #2472 and #2477. Fixes #2475.
 2020-01-17 17:36:08 -08:00
Hierophect
3f43155b63 Meowbit bus conflict WIP 2020-01-17 13:31:12 -05:00
arturo182
69785cccfe
mimxrt1011: Fix pin definition 2020-01-17 14:45:29 +01:00
Michael Welling
cc77e86408 Update the VID and USB company string 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 15:43:49 -08:00
Michael Welling
cc03d68984 Fix backlight pin registration 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 14:53:07 -08:00
Michael Welling
86d454adf3 Initial board support for OHS2020 Badge 
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 13:46:56 -08:00
Scott Shawcroft
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm 
nrf: Add bonding to BLE pairing support
 2020-01-15 16:11:09 -08:00
Dan Halbert
765a54afb5
Merge pull request #2525 from aramcon-badge/badge_2019_upstream 
Add board definition files for AramCon Badge 2019
 2020-01-15 18:29:36 -05:00
Benny Meisels
4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00
Dan Halbert
f496b6cdc8
Merge pull request #2520 from joeycastillo/openbook-squashed 
CircuitPython support for the Open Book
 2020-01-15 17:21:19 -05:00
Dan Halbert
85dc4089b9 address review comments 2020-01-14 17:23:16 -05:00
dalegrover
d6e657b593 Initial commit. 2020-01-14 16:51:27 -05:00
Joey Castillo
eb481c9247 add support for the Open Book 2020-01-14 16:34:46 -05:00
Hierophect
1070f2c853 Merge remote-tracking branch 'upstream/master' into stm32-meowbit 2020-01-14 16:11:59 -05:00
Hierophect
05093f7f54 Fix VTOR relocate, add bootloader makefile handling 2020-01-14 15:50:00 -05:00
hierophect
7775513a5b
Merge pull request #2463 from hierophect/stm32-i2c-rework 
STM32: I2C fix & general busio cleanup
 2020-01-14 15:06:31 -05:00
Scott Shawcroft
b5df5ce1ce
Merge pull request #2507 from kamtom480/circuitpython-mkspk 
Add mkspk source files
 2020-01-14 12:05:36 -08:00
Hierophect
5aae8df5d7 style changes, fix i2c typo 2020-01-14 13:30:16 -05:00
Hierophect
c0dacba80f remove comment confusing py tools 2020-01-14 13:06:10 -05:00
scs217
50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217
18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217
c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Dan Halbert
0367ba7495 fix some typos and leftovers 2020-01-13 18:29:34 -05:00
Dan Halbert
2a75196aa3 merge from adafruit/circuitpython 2020-01-13 18:15:32 -05:00
Dan Halbert
4ad004f24e put bonding to-do flags into Connection objects instead of using a heap-allocated queue 2020-01-13 17:52:32 -05:00
Hierophect
de2379bc30 minor WIP debug edits 2020-01-13 17:24:52 -05:00
Scott Shawcroft
2eb26a6d0b
Merge pull request #2457 from hierophect/stm32-cpython-compat 
STM32: Cpython compatibility flag 2
 2020-01-13 13:47:55 -08:00
Kamil Tomaszewski
402f6f66bd Add mkspk source files 2020-01-13 07:53:24 +01:00
Dan Halbert
9e7f8743c2 fix CCCD bonding store; avoid excessive bonding writes 2020-01-12 23:32:51 -05:00
Dan Halbert
346ce3b73b wip: HID bonding works! 2020-01-10 23:55:45 -05:00
Scott Shawcroft
6ea1785457
Merge pull request #2501 from kamtom480/timerhook 
Fix board_timerhook
 2020-01-10 11:57:54 -08:00
Scott Shawcroft
6ea8d8a6c2
Merge pull request #2498 from dhalbert/optional-i2c-pullup-checking 
Make requiring I2C pullups be optional
 2020-01-10 11:42:44 -08:00
Scott Shawcroft
8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults 
Urandom hardfaults
 2020-01-10 11:37:59 -08:00
Hierophect
1544d60000 working control 2020-01-10 13:09:14 -05:00
Hierophect
1229de4499 attempt to get control going again 2020-01-10 12:56:22 -05:00
Dan Halbert
360c876be4 add flag to i.mx port 2020-01-10 09:20:21 -05:00
Kamil Tomaszewski
357506dd9a Fix board_timerhook 2020-01-10 13:59:52 +01:00
Dan Halbert
9c167af17a wip; redid flash writing to be compatible with SD 2020-01-09 17:40:02 -05:00
Dan Halbert
189f2d5f07 Make requiring I2C pullups be optional 2020-01-09 17:31:50 -05:00
Hierophect
4ec588bb37 spacing changes and text fix 2020-01-09 16:17:57 -05:00
Hierophect
e509115630 Merge branch 'master' into stm32-i2c-rework 2020-01-09 16:01:31 -05:00
Jeff Epler
d7c6d9cabd
Merge pull request #2459 from hierophect/stm32-spi-oneline 
STM32: Allow simplex SPI
 2020-01-09 10:03:44 -06:00
Jeff Epler
1c6efb9e66 os.urandom: remove unneeded sleep 2020-01-08 16:48:17 -06:00
Hierophect
10eed78dd8 use CFLAG to properly set define 2020-01-08 17:37:20 -05:00
Hierophect
b74e78d2c0 Merge remote-tracking branch 'upstream/master' into stm32-cpython-compat 2020-01-08 17:11:50 -05:00
Hierophect
270f0dfc7c text fix 2020-01-08 15:58:20 -05:00