circuitpython

Author	SHA1	Message	Date
Jonny Bergdahl	38177aff33	Removed 'raw' from error message 'raw in'	2021-05-22 12:36:28 +02:00
Scott Shawcroft	20946d97a1	Merge pull request #4743 from tannewt/simplify_status_led Simplify the status LED to save power	2021-05-21 10:55:11 -07:00
Scott Shawcroft	22e8b20907	Merge pull request #4792 from Neradoc/nera-fix-IPv4Address Fix ipaddress.IPv4Address from returning invalid values	2021-05-21 10:47:41 -07:00
Neradoc	9fa7fb7092	fix ipaddress.IPv4Address from returning invalid values	2021-05-20 23:17:56 +02:00
Scott Shawcroft	561ffec693	Merge remote-tracking branch 'adafruit/main' into simplify_status_led	2021-05-20 13:46:42 -07:00
Dan Halbert	f5aa55c247	Merge pull request #4606 from hierophect/sleep-revamp Internal API revisions to sleep	2021-05-20 16:00:52 -04:00
Scott Shawcroft	5643355e90	Merge remote-tracking branch 'adafruit/main' into simplify_status_led	2021-05-20 08:35:15 -07:00
Scott Shawcroft	ee7a701487	Switch to start_advertising arg	2021-05-19 12:21:48 -07:00
gabewillen	806b39fb22	Update Adapter.c Added support for setting transmitter power	2021-05-19 11:55:01 -07:00
gabewillen	7dee378ade	Update Adapter.h Added support for setting transmitter power	2021-05-19 11:55:01 -07:00
Lucian Copeland	633d83cc3e	Merge remote-tracking branch 'upstream/main' into sleep-revamp	2021-05-17 18:57:10 -04:00
Limor "Ladyada" Fried	9752162508	Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins Update various Trinkey pins and add _pixelbuf	2021-05-15 11:52:33 -04:00
Dan Halbert	1e2a945782	Make busio.SPI be NotImplementedError on proxlight to save space	2021-05-14 21:52:54 -04:00
Scott Shawcroft	689ec86225	Merge pull request #4754 from dhalbert/fix-endpoint-checking Fix endpoint checking; Clean up safe mode printing	2021-05-14 11:25:01 -07:00
Neradoc	3e5ec403fb	time.localtime: low timestamps are ok if epoch is 2000	2021-05-14 12:20:49 +02:00
Dan Halbert	fa6c06fb38	count in/out endpoints; allow more usb modules on low-endpoint boards	2021-05-13 21:59:02 -04:00
Scott Shawcroft	1a0b4193b7	Simplify the status LED to save power This also removes the need to pin share because we don't use the status LED while user code is running. The status flashes fallback to the HW_STATUS LED if no RGB LED is present. Each status has a unique blink pattern as well. One caveat is the REPL state. In order to not pin share, we set the RGB color once. PWM and single color will be shutoff immediately but DotStars and NeoPixels will hold the color until the user overrides it. Fixes #4133	2021-05-13 14:41:20 -07:00
Lucian Copeland	295103bb31	Merge remote-tracking branch 'upstream/main' into sleep-revamp	2021-05-13 16:22:12 -04:00
Scott Shawcroft	35ee4add63	Merge pull request #4388 from hierophect/stm-alarm STM32: Alarms and sleep	2021-05-13 10:27:51 -07:00
Lucian Copeland	0d3c5222d8	Merge remote-tracking branch 'upstream/main' into stm-alarm	2021-05-10 17:30:33 -04:00
James Carr	106429a5e6	Update __init__.c Minor typo.	2021-05-10 21:13:05 +01:00
Jeff Epler	5e06c91244	Merge pull request #4716 from tyomitch/main s/Circuit Python/CircuitPython/g	2021-05-08 08:47:29 -05:00
Jeff Epler	446169e078	Merge pull request #4720 from tannewt/merge_1.13 Merge in MicroPython 1.13	2021-05-08 08:46:03 -05:00
Scott Shawcroft	5c736835de	Fix esp32s2 builds after AP changes	2021-05-07 10:03:02 -07:00
Dan Halbert	c6b9885573	Merge pull request #4721 from dhalbert/update-xtensa-cache-id update github actions xtensa cache id; fix a typo	2021-05-06 16:48:20 -04:00
Dan Halbert	0773e355a7	update github actions xtensa cache id; fix a typo	2021-05-06 15:10:45 -04:00
Scott Shawcroft	42f4065c8a	Merge remote-tracking branch 'adafruit/main' into merge_1.13	2021-05-06 11:17:53 -07:00
Dan Halbert	ebf9dcb47a	Merge pull request #4689 from dhalbert/dynamic-usb-descriptors Dynamic USB descriptors	2021-05-06 13:51:38 -04:00
Scott Shawcroft	71d2536725	Build fixes thanks to jepler	2021-05-06 09:04:56 -07:00
Artyom Skrobov	908d83d1f2	s/Circuit Python/CircuitPython/g Some comments and messages used the non-standard spelling	2021-05-06 16:22:35 +03:00
Scott Shawcroft	3fda0c0a1b	Fix board builds and use MP_ERROR_TEXT in py and extmod	2021-05-05 17:51:52 -07:00
Dan Halbert	8f9c9dd45f	doc error	2021-05-05 13:41:44 -04:00
Dan Halbert	fc8e1c4c2e	address review comments	2021-05-05 12:35:12 -04:00
Scott Shawcroft	30c7aa8fc9	Merge pull request #4650 from anecdata/ap wifi.radio Access Point modes	2021-05-05 08:47:55 -07:00
Scott Shawcroft	f0bb26d70f	Merge MicroPython 1.13 into CircuitPython	2021-05-04 18:06:33 -07:00
Dan Halbert	adc3d7d55e	update Python API according to review comments	2021-05-03 22:29:02 -04:00
Dan Halbert	d2b558993e	merge from main, including MicroPython 1.12 merge	2021-05-03 20:56:04 -04:00
Dan Halbert	5b5de4b92e	fix sHID report doc and API	2021-05-03 20:53:31 -04:00
Dan Halbert	cae31d6762	remove PWMOut from pulseio	2021-05-01 09:31:11 -04:00
microDev	eebcd2eeaf	remove unsupported authmodes	2021-04-30 22:11:32 +05:30
microDev	6640db9555	make authmode settable	2021-04-30 21:35:02 +05:30
Dan Halbert	be7b2b00a8	uncrustify with newer version of uncrustify	2021-04-30 10:40:12 -04:00
Dan Halbert	cc95b71d64	fix type annotations	2021-04-30 09:40:40 -04:00
microDev	7c845818b3	Merge branch 'main' into ap	2021-04-30 17:11:22 +05:30
Dan Halbert	b8b20faa20	doc fixes	2021-04-29 23:51:39 -04:00
Mark	5ef9b10669	Merge pull request #4685 from microDev1/authmode Add AuthMode class	2021-04-29 22:12:58 -05:00
Dan Halbert	71a8cadb09	working!	2021-04-29 22:26:38 -04:00
Jeff Epler	52589691b8	Merge pull request #4651 from lesamouraipourpre/minor-docs-fixes Minor docs fixes in displayio.Bitmap	2021-04-29 08:12:47 -05:00
microDev	1b972c51c3	add authmode class	2021-04-29 18:42:36 +05:30
Dan Halbert	f06d54524d	merge from adafruit	2021-04-28 23:48:26 -04:00
Lucian Copeland	9feef41c82	Merge remote-tracking branch 'upstream/main' into stm-alarm	2021-04-28 15:10:55 -04:00
Dan Halbert	587aedd14f	rework storage allocation	2021-04-28 13:00:44 -04:00
Dan Halbert	d4d96bb25f	Merge pull request #4236 from jun2sak/nrf52-sleep sleep and wakeup for nrf52	2021-04-28 12:11:31 -04:00
Dan Halbert	f98a54628b	wip: compiles	2021-04-27 14:37:36 -04:00
Scott Shawcroft	17fcd499b2	Merge pull request #4649 from tannewt/merge_1.11_2 Merge MicroPython v1.11 into CircuitPython	2021-04-27 11:02:02 -07:00
Dan Halbert	7a40b4daec	very much WIP	2021-04-26 23:54:01 -04:00
Scott Shawcroft	76033d5115	Merge MicroPython v1.11 into CircuitPython	2021-04-26 15:47:41 -07:00
anecdata	a1e2afadce	AP ip_info, gateway, & subnet	2021-04-26 00:22:51 -05:00
Dan Halbert	c26e49c2e6	wip: starting to try to compile	2021-04-25 23:17:41 -04:00
anecdata	f20a53177b	add authmode to start_ap()	2021-04-25 18:20:18 -05:00
anecdata	6f6c0cff81	embellish rtd comments. channel _should_ default to 1 behind the scenes since 0 is out of range, but just to be sure, default channel to 1	2021-04-25 14:30:45 -05:00
Dan Halbert	9d1fcc3b14	merge from main	2021-04-25 10:27:52 -04:00
Dan Halbert	aea3c4d3ab	wip	2021-04-25 10:23:59 -04:00
jun2sak	7accb8b173	modify copyright notice.	2021-04-25 19:57:21 +09:00
anecdata	dc3c47d396	ap channel param	2021-04-25 00:22:08 -05:00
anecdata	de01814cce	call start and stop (oops)	2021-04-24 20:38:04 -05:00
anecdata	354b442867	fixes	2021-04-24 19:36:11 -05:00
anecdata	2e52c0ae62	set all wifi modes; add sta start & sta/ap stop	2021-04-24 16:41:41 -05:00
Dan Halbert	2ba2574ebf	Merge pull request #4619 from tyomitch/microbit [build] Allow USB to be set to 0	2021-04-24 10:31:29 -04:00
anecdata	4d267ef644	add get_ipv4_address_ap	2021-04-23 21:44:34 -05:00
Dan Halbert	556a126917	wip: getting closer	2021-04-23 21:44:13 -04:00
Scott Shawcroft	80e8b4ac14	Merge pull request #4635 from jepler/pcc WIP: Implement 'ParallelImageCapture' for samd51	2021-04-23 13:31:53 -07:00
Jeff Epler	8565a9ab90	shared-bindings: Fix type of Colorspace values in docs	2021-04-23 12:39:37 -05:00
Artyom Skrobov	4e3c1d4a4c	[build] Allow USB to be set to 0 Unify USB-related makefile var and C def as CIRCUITPY_USB. Always define it as 0 or 1, same as all other settings. USB_AVAILABLE was conditionally defined in supervisor.mk, but never actually used to #ifdef USB-related code. Loosely related to #4546	2021-04-23 11:13:34 -04:00
Jeff Epler	05a81a066e	displayio: Improve docs about Colorspaces	2021-04-23 09:57:24 -05:00
James Carr	0be610fd2b	Changes as requested for Bitmap docs.	2021-04-23 14:41:47 +01:00
James Carr	07059dd373	Minor docs fixes in displayio.Bitmap	2021-04-23 12:56:44 +01:00
anecdata	9da8978d40	more of the same	2021-04-22 23:41:57 -05:00
anecdata	632cebafc6	fix comment (stub fail)	2021-04-22 23:33:33 -05:00
Dan Halbert	2b4c88d633	wip: partial HID, still needs rework	2021-04-23 00:18:05 -04:00
anecdata	3544d4e221	.start_ap() & .mac_address_ap	2021-04-22 22:57:07 -05:00
Dan Halbert	01979acd48	Merge pull request #4604 from tannewt/buffer_size Assume max characteristic size when the client	2021-04-20 12:02:06 -04:00
Jeff Epler	99799cded6	imagecapture: implement to review suggestions	2021-04-20 10:21:32 -05:00
Jeff Epler	76d68f21ac	displayio: Add RGB555/565/_SWAPPED format support This is helpful when displaying frames from an OV7670 camera, which uses the RGB565_SWAPPED format internally.	2021-04-19 10:23:47 -05:00
Jeff Epler	fc4538f845	WIP: Implement 'ParallelImageCapture' for samd51	2021-04-16 17:18:59 -05:00
Scott Shawcroft	81e11ae063	Fix type	2021-04-16 11:30:10 -07:00
Lucian Copeland	e0024c70de	Merge remote-tracking branch 'upstream/main' into stm-alarm	2021-04-15 16:32:30 -04:00
Lucian Copeland	7eeea869ac	Fix light sleep global alarms, API revisions	2021-04-15 15:02:42 -04:00
Neradoc	827f67813f	add a filter text field to the support matrix	2021-04-15 19:05:50 +02:00
Dan Halbert	6cb751ab06	wip: revamp API names	2021-04-14 22:10:09 -04:00
Scott Shawcroft	aa28d4f315	Allow setting max_packet_size for PacketBuffer This is handy for remote characteristics because it allows for the PacketBuffer binding code to have the correct max size. This PR also adds checks so we don't write outside the outgoing buffer.	2021-04-14 17:09:48 -07:00
Dan Halbert	4a7e129287	wip: latent usb device enabling/disabling	2021-04-13 23:33:44 -04:00
Artyom Skrobov	c6ee471b52	Merge branch 'main' of https://github.com/adafruit/circuitpython into patch-3	2021-04-13 00:32:19 -04:00
Lucian Copeland	15764b4c24	Merge remote-tracking branch 'upstream/main' into nrf52-sleep	2021-04-09 13:48:45 -04:00
Dan Halbert	72055ff02b	Merge pull request #4578 from tannewt/packetbuffer_lengths Improve PacketBuffer lengths and remove packet_size	2021-04-08 18:55:24 -04:00
Scott Shawcroft	5ec195b5ef	Remove PacketBuffer.packet_size Fixes #2853	2021-04-08 13:29:26 -07:00
Dan Halbert	82479b6a2c	Merge pull request #4503 from hierophect/sleep-api-update Sleep API changes and fix for main.c silent issue	2021-04-06 16:53:25 -04:00
James Carr	8958c1e227	Minor documentation fixes in displayio	2021-04-06 10:47:46 +01:00
Lucian Copeland	bf58afdb2a	Merge pull request #4399 from tyomitch/patch-2 [stm] implementation of audiopwmio	2021-04-05 18:35:39 -04:00
Jeff Epler	78089107bc	displayio.Bitmap: Allow modification though the buffer protocol It is required to call .dirty() with appropriate arguments after modifications through the buffer protocol, or the display might not be updated correctly.	2021-04-03 10:41:20 -05:00
Jeff Epler	3f158450f9	can't xref this right now	2021-04-02 13:09:23 -05:00
Jeff Epler	5a56df989f	can't xref this right now	2021-04-02 13:09:23 -05:00
Jeff Epler	758dc81fcb	displayio: ulab.frombuffer -> ulab.numpy.frombuffer	2021-04-02 13:09:23 -05:00
Jeff Epler	b1dfd64fdc	stubs: ulab.array -> ulab.ndarray	2021-04-02 13:09:23 -05:00
Lucian Copeland	17585e1e07	Clean up API	2021-04-02 14:08:48 -04:00
James Carr	65759622ea	Add a missing parameter to an error message (Fixes #4505 )	2021-03-29 23:03:14 +01:00
Dan Halbert	b274a0497b	Merge pull request #4501 from jepler/rgbmatrix-memoryview RGBMatrix: fix memoryview(matrix)	2021-03-29 16:07:22 -04:00
Lucian Copeland	d35a307ffa	Merge branch 'sleep-api-update' into stm-alarm	2021-03-29 12:27:25 -04:00
Lucian Copeland	00178ca5e0	Sleep API changes, redundancy fix	2021-03-27 14:14:57 -04:00
Lucian Copeland	529fb52309	Style changes and wakeup detection	2021-03-27 13:16:12 -04:00
Jeff Epler	b04f9130c7	RGBMatrix: fix memoryview(matrix) Typical test: ```python import displayio import rgbmatrix import board displayio.release_displays() matrix = rgbmatrix.RGBMatrix( width=128, bit_depth=4, rgb_pins=[board.GP0, board.GP1, board.GP2, board.GP3, board.GP4, board.GP5], addr_pins=[board.GP6, board.GP7, board.GP8, board.GP9], clock_pin=board.GP10, latch_pin=board.GP11, output_enable_pin=board.GP12) mem = memoryview(matrix) mem[0] = 65535 # OK mem[0] = 65536 # errors (out of range) ```	2021-03-27 12:04:27 -05:00
Jeff Epler	583fc76cf5	run uncrustify	2021-03-26 15:38:20 -05:00
Artyom Skrobov	8056af8648	[synthio] add a simple MidiTrack implementation	2021-03-26 16:38:10 -04:00
Jeff Epler	a70b679ed5	bitbangio.SPI.read: Support write_value, fix some other nits	2021-03-26 12:24:09 -05:00
Artyom Skrobov	b40d072648	[stm] implementation of audiopwmio Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect Tested on a Meowbit	2021-03-26 13:18:01 -04:00
Dan Halbert	1512ca520b	Fix PWMOut non-error handling and never reset	2021-03-19 09:57:21 -04:00
Dan Halbert	b2d913412f	merge from upstream	2021-03-18 23:14:43 -04:00
Jeff Epler	d0125617fd	Merge pull request #4428 from kmatch98/bitmap-read-2 Add `reverse_rows` to speedy bitmaptools.readinto function	2021-03-18 18:41:35 -05:00
Jeff Epler	623ece2c73	Merge pull request #4429 from jepler/displayio-bitmap-memoryview displayio.Bitmap: Make memoryview()able	2021-03-18 18:38:25 -05:00
microDev	bd95914e88	implement function to check usb connection	2021-03-18 10:00:01 +05:30
Scott Shawcroft	670375dc0d	Merge pull request #4426 from kmatch98/main Add getter for displayio.Palette item transparency/opacity.	2021-03-17 18:13:39 -07:00
Jeff Epler	720d242b4f	doc fix	2021-03-17 16:38:10 -05:00
Jeff Epler	c157ada90c	displayio.Bitmap: Make memoryview()able	2021-03-17 16:26:45 -05:00
Kevin Matocha	c37a1f45f3	ran pre-commit for formatting fixes	2021-03-17 11:00:32 -05:00
Kevin Matocha	ef91e1752c	merge upstream/main	2021-03-17 09:30:51 -05:00
Jeff Epler	bfc8c89536	Merge pull request #4403 from jepler/bitmap-read-2 bitmaptools: Add readinto, arrayblit	2021-03-17 07:57:31 -05:00
Kevin Matocha	592f89f6ae	add back peculiar r to docstring	2021-03-16 20:45:55 -05:00
Kevin Matocha	5c3cce6f5d	add is_transparent getter to displayio.Palette	2021-03-16 20:43:23 -05:00
Jeff Epler	074ba1daff	more doc fixes	2021-03-16 19:05:06 -05:00
Jeff Epler	5810004bc9	fix doc error	2021-03-16 19:01:38 -05:00
Jeff Epler	e1dd396de7	fix stub docs	2021-03-16 13:37:04 -05:00
Jeff Epler	58679dc038	Merge remote-tracking branch 'origin/main' into bitmap-read-2	2021-03-16 12:21:50 -05:00
Jeff Epler	97b6664201	re-format with uncrustify	2021-03-16 12:20:09 -05:00
Kevin Matocha	870dadc85a	update more docstrings	2021-03-16 10:42:46 -05:00
Kevin Matocha	a367e84cea	update docstrings	2021-03-16 10:35:40 -05:00
Kevin Matocha	227ac67463	Add reverse_rows option to bitmaptools.readinto	2021-03-16 10:01:12 -05:00
gamblor21	bdc368895f	Formatting	2021-03-16 08:39:44 -05:00
Jeff Epler	542fb58673	add arrayblit	2021-03-15 20:36:44 -05:00
Mark	e326d7ca80	Merge branch 'main' into rp_dp_parallel	2021-03-15 20:00:13 -05:00
microDev	a52eb88031	run code formatting script	2021-03-15 19:27:36 +05:30
Jeff Epler	3cbff45f9a	Merge pull request #4407 from jposada202020/RTC_doc_corrections RTC and Touchin docs changes	2021-03-14 20:52:19 -05:00
Jeff Epler	651f54b4cc	fix docs	2021-03-14 15:47:15 -05:00
jposada202020	1386a8104a	RTC and Touchin docs changes	2021-03-14 16:20:40 -04:00
Jeff Epler	da030ce7d8	Merge pull request #4402 from jposada202020/analogio_doc_corrections Change in documentation in Analogio	2021-03-14 15:00:48 -05:00
Jeff Epler	9133b23a37	bitmaptools: Add readinto When reading uncompressed bitmap data directly, readinto can work much more quickly than a Python-coded loop. On a Raspberry Pi Pico, I benchmarked a modified version of adafruit_bitmap_font's pcf reader which uses readinto instead of the existing code. My test font was a 72-point file created from Arial. This decreased the time to load all the ASCII glyphs from 4.9 seconds to just 0.44 seconds. While this attempts to support many pixel configurations (1/2/4/8/16/24/32 bpp; swapped words and pixels) only the single combination used by PCF fonts was tested.	2021-03-14 13:57:46 -05:00
jposada202020	6a56d5dc73	Change in documentation in Analogio	2021-03-14 04:15:35 -04:00
Scott Shawcroft	b413535ee1	Merge pull request #4376 from kmatch98/displayio_bitmap add fill_region and draw_line to bitmap_tools	2021-03-12 16:50:39 -08:00
gamblor21	5689307798	Changed frequency to match PIO having 2 instructions	2021-03-11 19:32:44 -06:00
gamblor21	b02b1e9979	Set frequency default 60Mhz	2021-03-11 19:32:44 -06:00
gamblor21	56a219911f	Add frequency support to parallel bus	2021-03-11 19:32:43 -06:00
Lucian Copeland	6b2c9985ff	Extract RTC, implement fake RTC deepsleep	2021-03-11 17:50:05 -05:00
Kevin Matocha	a9afa0d9d4	Move input checks to shared-module, update docstrings	2021-03-11 16:18:17 -06:00
Dan Halbert	08c5dbb003	use return values in STM PWMOut constructor, not exceptions	2021-03-11 08:52:47 -05:00
Kevin Matocha	85f0f07d51	add fill_region and draw_line to bitmaptools	2021-03-10 11:37:27 -06:00
Dan Halbert	24ac8152dd	Clarify further; fix type error	2021-03-07 20:32:59 -05:00
Dan Halbert	1a6c021239	Add clarifying comment re carriage-return char.	2021-03-07 17:04:27 -05:00
Dan Halbert	a6cb7d7069	Document readline() and readlines()	2021-03-07 15:34:07 -05:00
Dan Halbert	d919b7fa4a	fix #4352	2021-03-07 14:13:20 -05:00
Dan Halbert	8594396a07	Add caveat for usb_cdc.Serial.connected	2021-03-07 14:07:07 -05:00
jun2sak	51c7a49853	Merge branch 'main' into nrf52-sleep	2021-03-07 20:50:53 +09:00
Jeff Epler	b23c5b2d68	nvm: fix doc markup closes #4336	2021-03-06 07:54:54 -06:00
Dan Halbert	cd48c5ee83	Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes RP2040: Implement short I2C writes (2 bytes or less) using bitbangio	2021-03-03 12:42:47 -05:00
Jeff Epler	efc2667b5f	Merge pull request #4186 from jepler/update-protomatter-rp2 Enable protomatter on RP2040 builds	2021-03-02 19:01:37 -06:00
Dan Halbert	f31b472309	Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes	2021-03-02 15:17:12 -05:00
Dan Halbert	9939c59caa	wip	2021-03-02 15:16:55 -05:00
Scott Shawcroft	e4f0e47d9f	Merge pull request #4233 from pewpew-game/displayio-group-list displayio: make Group use a python list internally	2021-03-02 09:59:58 -08:00
Lucian Copeland	f1792c8474	Extract EXTI, create base sleep framework	2021-03-02 11:41:53 -05:00
Scott Shawcroft	d0eab5c561	Merge pull request #4256 from kmatch98/bt_cleanup Add `bitmaptools` module	2021-03-01 18:24:12 -08:00
Jeff Epler	238484ec26	Merge remote-tracking branch 'origin/main' into update-protomatter-rp2	2021-03-01 15:18:32 -06:00
ajs256	f722df70c8	Fix formatting in SPI docs Close #4293 by changing `..note::` to `.. note::`.	2021-03-01 09:06:24 -08:00
jun2sak	3e47e00291	address the pretending-to-deep-sleep issue.	2021-02-28 15:57:37 +09:00
Radomir Dopieralski	24473b7983	Separate out mp_obj_list_insert for use in display.Group Note that for some reason this makes the binary 500 bytes larger!	2021-02-27 21:13:55 +01:00
Radomir Dopieralski	38fb7b511b	Remove max_size from displayio.Group Still accept it as an argument. Add deprecation note.	2021-02-27 20:52:38 +01:00
Radomir Dopieralski	e9953754ea	Add displayio.Group.sort() method	2021-02-27 20:52:38 +01:00
Jeff Epler	1d1ff5f308	Merge remote-tracking branch 'origin/main' into update-protomatter-rp2	2021-02-26 09:56:35 -06:00
Scott Shawcroft	3f08cb47b8	Merge remote-tracking branch 'adafruit/main' into busio-uart-rp	2021-02-25 16:59:15 -08:00
Scott Shawcroft	52bc935fa7	A few minor fixes for corner cases * Always clear the peripheral interrupt so we don't hang when full * Store the ringbuf in the object so it gets collected when we're alive * Make UART objects have a finaliser so they are deinit when their memory is freed * Copy bytes into the ringbuf from the FIFO after we read to ensure the interrupt is enabled ASAP * Copy bytes into the ringbuf from the FIFO before measuring our rx available because the interrupt is based on a threshold (not > 0). For example, a single byte won't trigger an interrupt.	2021-02-25 16:50:57 -08:00
Kevin Matocha	c883bb773b	Rearrange input parameters	2021-02-24 16:03:50 -06:00
microDev	5d7fdafcde	implement suggested changes - add internal buffering - rtc initialization fix	2021-02-25 00:48:36 +05:30
Kevin Matocha	cd4d55a573	yet another sphinx try	2021-02-24 08:05:40 -06:00
Kevin Matocha	e858db07f0	Another sphinx try	2021-02-24 07:59:32 -06:00
Kevin Matocha	2815c6dafa	More sphinx attempts	2021-02-24 07:49:34 -06:00
Kevin Matocha	af5ad50125	More sphinx fixes	2021-02-24 01:18:30 -06:00
Kevin Matocha	18658b77f3	Sphinx docstring updates	2021-02-24 01:00:13 -06:00
Kevin Matocha	b720028642	Add bitmaptools module	2021-02-23 23:23:14 -06:00
Dan Halbert	67406488d1	merge from upstream; re-alphabetize	2021-02-19 14:22:50 -05:00
Dan Halbert	9d4442e298	handle reads/writes larger than buffers; add .write_timeout	2021-02-19 14:15:31 -05:00
microDev	b12ccefbe6	uart implementation for rp2040	2021-02-19 18:36:00 +05:30
Jeff Epler	5c758523c0	requested changes	2021-02-18 17:19:34 -06:00
Jeff Epler	ffae89b191	bitops: fix argument parsing	2021-02-18 16:10:57 -06:00
Jeff Epler	d56fe7691d	bitops: doc correction	2021-02-18 15:44:51 -06:00
Jeff Epler	7fd4567893	bitops: rename from _bit_transpose, describe the algorithm	2021-02-18 15:41:23 -06:00
Jeff Epler	ac0ffc5656	_bit_transpose: fix docs	2021-02-18 11:45:48 -06:00
Jeff Epler	c284728621	bit_transpose: Support from 2 to 7 strands, not just 8	2021-02-18 11:33:13 -06:00
Jeff Epler	9cf7d73c6c	core: add bit_transpose function .. this version can only handle exactly 8 bits "across". The restriction may be relaxed in a future revision.	2021-02-18 11:32:47 -06:00
Dan Halbert	ed49c02feb	add timeout; finish up for PR	2021-02-17 23:24:11 -05:00
Dan Halbert	c26de0136a	works! no timeouts	2021-02-16 17:39:36 -05:00
Dan Halbert	0b8f1b9a90	wip: usb_cdc.serials	2021-02-15 20:06:18 -05:00
Dan Halbert	93d788543c	Merge remote-tracking branch 'adafruit/main' into secondary-cdc	2021-02-15 20:03:53 -05:00
Dan Halbert	d54b5861a3	wip	2021-02-12 19:01:14 -05:00
Dan Halbert	3e4328140c	fix off-by-one PWM top issue	2021-02-12 15:53:31 -05:00
Jeff Epler	ff1942cff6	Enable protomatter on RP2040 builds Also found a race condition between timer_disable and redraw, which would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable or put a delay or print inside it. That's what pausing inside reconstruct fixes. So that the "right timer" can be chosen, `timer_allocate` now gets the `self` pointer. It's guaranteed at this point that the pin information is accurate, so you can e.g., find a PWM unit related to the pins themselves. This required touching each port to add the parameter even though it's unused everywhere but raspberrypi.	2021-02-12 08:25:15 -06:00
Dan Halbert	f0564b4986	merge from upstream; complicated webusb merge	2021-02-11 18:50:02 -05:00
Dan Halbert	d7305182f0	Remove adafruit_bus_device.SPIDevice.spi	2021-02-11 10:33:57 -05:00
Jeff Epler	ba2b65586f	sdcardio: add a note about sharing the SPI bus with SD cards and other devices Similar to https://github.com/adafruit/Adafruit_CircuitPython_SD/pull/44	2021-02-09 10:07:21 -06:00
Dan Halbert	3a68ac8abb	Merge pull request #3536 from pewpew-game/pew-get-ticks Fix #3504: Don't use time module in pew.tick()	2021-02-08 17:50:44 -05:00
Dan Halbert	be500fd15c	Merge pull request #4136 from hierophect/socket-portmax Socket: fix inconsistencies in argument types	2021-02-08 16:23:20 -05:00
Dan Halbert	f66caa29b9	Merge pull request #4146 from gamblor21/busdevice_write_read_fix Fix write_then_readinto in adafruit_bus_device I2CDevice	2021-02-08 11:33:06 -05:00
Dan Halbert	1b7f3d11e7	wip	2021-02-08 10:57:41 -05:00
gamblor21	ea4a12005a	Fix write_then_readinto	2021-02-06 10:33:38 -06:00
Lucian Copeland	4d26ffb447	Make timeout core types consistent	2021-02-05 12:32:41 -05:00
Scott Shawcroft	9140bfb5b2	Merge pull request #4049 from hierophect/sslsocket Separate SSLSocket from Socket	2021-02-02 10:35:07 -08:00
Scott Shawcroft	a861498404	Merge pull request #4114 from tannewt/spidevice_spi Add .spi accessor to SPIDevice	2021-02-02 09:53:10 -08:00
Scott Shawcroft	8fd6bff727	Add .spi accessor to SPIDevice Fixes #4108	2021-02-01 20:03:23 -08:00
Scott Shawcroft	8789a2c8a9	Merge pull request #4110 from microDev1/rtc-rp RP2040: Support for RTC	2021-02-01 19:47:44 -08:00
Scott Shawcroft	db7a962802	Merge pull request #4112 from gamblor21/longint_busdevice_fix Fixed for boards without longint	2021-02-01 19:24:57 -08:00
gamblor21	0cf2df48c4	Fixed for boards without longint	2021-02-01 17:58:34 -06:00
microDev	ec03267035	rtc implementation for rp2040	2021-02-02 00:00:00 +05:30
Dan Halbert	459f323247	Merge pull request #4087 from DavePutz/cpu_temp_doc Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus	2021-02-01 12:50:37 -05:00
Lucian Copeland	66639b237f	Merge remote-tracking branch 'upstream/main' into sslsocket	2021-02-01 11:43:01 -05:00
Lucian Copeland	8277ffca86	Fix hash, close, error bugs	2021-02-01 11:04:12 -05:00
root	e1838ff335	Fix typo in documentation.	2021-01-29 11:57:36 -06:00
Lucian Copeland	a724f6f954	Fix documentation builds	2021-01-29 11:58:02 -05:00
root	cfd6ffc649	Adding files for cpu temperature fix	2021-01-28 16:06:30 -06:00
Jeff Epler	0098909757	RGBMatrix: change default to serpentine=True The "serpentine" display order leads to much better wiring (shorter ribbon cables) and is preferred. Change the default accordingly.	2021-01-28 11:42:19 -06:00
Scott Shawcroft	45b3c9ae42	Merge pull request #4068 from jepler/update-protomatter-tiling protomatter: Update to version that supports tiling	2021-01-26 17:31:26 -08:00
Jeff Epler	189ec2fc60	Disallow tile=0	2021-01-26 16:51:31 -06:00
Jeff Epler	20c9f25a65	rgbmatrix: Eliminate some duplicated height-calculating code This was hard to write, so let's have it written in 2 places instead of 4.	2021-01-26 14:35:26 -06:00
Jeff Epler	368977fb90	RGBMatrix: Additional tile tweaks * Introduce explicit serpentine: bool argument instead of using negative numbers (thanks, ghost of @tannewt sitting on one shoulder) * Fix several calculations of height Testing performed (matrixportal): * set up a serpentine 64x64 virtual display with 2 64x32 tiles * tried all 4 rotations * looked at output of REPL	2021-01-26 14:33:48 -06:00
Lucian Copeland	815ab5277b	Fix stubs error, out of sockets error, invalid TLS leak	2021-01-26 14:13:12 -05:00
Dan Halbert	13812a788f	Merge pull request #4060 from dhalbert/regularize-extmod-modules CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup	2021-01-26 12:54:21 -05:00
root	ccdc97d23e	Update documentation for microprossors with multiple cpus	2021-01-26 09:47:21 -06:00
Jeff Epler	51f0544405	protmatter: Update to version that supports tiling	2021-01-26 09:19:44 -06:00
Scott Shawcroft	4241fd4b18	Merge pull request #4051 from jamesbowman/main EVE: change fixed-point integer arguments to floating point	2021-01-25 14:44:48 -08:00
Scott Shawcroft	a2ac2da7cc	Merge pull request #3936 from gamblor21/busdevice_fixes Changing adafruit_bus_device to duck typing	2021-01-25 14:41:53 -08:00
Lucian Copeland	9f34ec78c4	Separate Socket and SSLSocket, add LWIP connect	2021-01-25 17:07:25 -05:00
Dan Halbert	69869e1439	CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup	2021-01-24 23:10:20 -05:00
Christian Walther	8889ac12e1	Add supervisor.set_next_code() function (prototype). Part of #1084.	2021-01-23 23:05:31 +01:00
James Bowman	dff3423c23	Change from fixed-point integer arguments to floating point in EVE API functions Changed calls: PointSize(), LineWidth(), VertexTranslateX() and VertexTranslateY() Units for all the above are now pixels, not fixed-point integers. This matches OpenGL. Docstrings updated accordingly	2021-01-22 15:52:46 -08:00
Scott Shawcroft	10a44af536	Merge pull request #3980 from anecdata/reasons2 ESP32-S2 update docs to match code usage of IPPROTO_*	2021-01-21 15:16:55 -08:00
hierophect	f88a896c03	Merge pull request #3854 from hierophect/esp-tcpserver ESP32S2: Implement TCP Server bindings	2021-01-21 17:25:14 -05:00
Scott Shawcroft	2b4ad1ed03	Fix warnings that come from -O3 (I think)	2021-01-20 19:16:56 -08:00
Scott Shawcroft	733094aead	Add initial RP2040 support The RP2040 is new microcontroller from Raspberry Pi that features two Cortex M0s and eight PIO state machines that are good for crunching lots of data. It has 264k RAM and a built in UF2 bootloader too. Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf	2021-01-20 19:16:56 -08:00
gamblor21	d3995eaf97	Fixes from draft PR	2021-01-16 14:21:57 -06:00
gamblor21	b609bc0124	Removed unused include	2021-01-16 14:21:57 -06:00
gamblor21	ea0e2f80b7	Changing to duck-typing	2021-01-16 14:21:57 -06:00
Lucian Copeland	287770f885	Merge remote-tracking branch 'upstream/main' into esp-tcpserver	2021-01-14 10:21:08 -05:00
anecdata	8febdee264	Rename to match WIFI_REASON. Also include specific error code in "Unknown failure" Exception.	2021-01-13 23:47:23 -06:00
anecdata	d1249fbe47	Include all reason codes.	2021-01-13 23:46:52 -06:00
Lucian Copeland	37a8c1c575	Complete non-blocking implementations, add socket close checking	2021-01-13 19:05:07 -05:00
anecdata	e703e06595	Update shared-bindings/socketpool/SocketPool.c Co-authored-by: Scott Shawcroft <scott@tannewt.org>	2021-01-13 11:17:37 -06:00
Lucian Copeland	4cdb298a20	WIP of non-blocking calls	2021-01-12 15:05:28 -05:00
anecdata	f07dd487af	change IPPROTO_* comments to match usage in current shared-bindings and common-hal code	2021-01-12 13:49:50 -06:00
Jeff Epler	1ca29ec47c	Merge remote-tracking branch 'origin/main' into audioout-esp32	2021-01-12 09:23:07 -06:00
Scott Shawcroft	4db55652a3	Merge pull request #3964 from dhalbert/ble-timing-fixes Round BLE timing values; fix timeout check	2021-01-11 16:52:14 -08:00
Scott Shawcroft	081249f796	Merge pull request #3944 from BennyE/wifi-authmode esp32-s2: Adding authmode keyword	2021-01-11 16:05:28 -08:00
Scott Shawcroft	91245297e8	Merge pull request #3659 from iot49/msgpack module msgpack	2021-01-11 15:22:39 -08:00
Dan Halbert	a397af9bdf	Round BLE timing values; fix timeout check	2021-01-10 13:16:19 -05:00
Dan Halbert	dd10c534c5	restore len(alarm.sleep_memory) and bool(alarm.sleep_memory)	2021-01-08 22:32:23 -05:00
Jeff Epler	30c6dd3f76	Merge remote-tracking branch 'origin/main' into audioout-esp32	2021-01-07 14:11:14 -06:00
BennyE	66d87782be	Adding authmode keyword	2021-01-06 23:52:30 +01:00
Scott Shawcroft	cdad59fbc2	Fix doc build with extra blank lines	2021-01-06 09:03:58 -08:00
adam_cummick:g9T51EHpC9gPQqG6sb9Q@gitlab.com	23c292a2a1	Add native_uart calls	2021-01-06 08:54:26 -05:00
iot49	1a82555803	Merge branch 'main' into msgpack	2021-01-05 11:19:11 -08:00
Bernhard Boser	90a299bb1e	added //\| to (hopefully) get CI to pass	2021-01-05 11:17:09 -08:00
@brrzap	df4c028d29	_pixelbuf: error check in brightness setter (fix #3753 )	2021-01-01 19:49:20 -05:00
microDev	0bad6110d4	update wake-alarm implementation	2020-12-31 02:44:20 +05:30
Adam Cummick	4809c92354	WIP - Add native helper based on displayio	2020-12-30 16:02:07 -05:00
microDev	28ce5e8988	Merge branch 'main' into touch-s2	2020-12-30 22:44:22 +05:30
Jeff Epler	2cd377f1a7	audiobusio: Make PDMIn optional	2020-12-29 14:06:32 -06:00
Scott Shawcroft	c3396e4b49	Merge pull request #3868 from BennyE/wifi-enhancement-countrycode esp32-s2: wifi enhancement to include countrycode	2020-12-28 11:49:41 -08:00
Dan Halbert	8061a2574d	Merge branch 'main' into pin_alarm	2020-12-23 22:05:02 -05:00
Dan Halbert	a11ad25727	BLE fixes	2020-12-23 16:39:27 -05:00
Scott Shawcroft	1fca297a2d	A couple sleep fixes * Better messaging when code is stopped by an auto-reload. * Auto-reload works during sleeps on ESP32-S2. Ticks wake up the main task each time. * Made internal naming consistent. CamelCase Python names are NOT separated by an underscore.	2020-12-22 16:13:02 -08:00
Dan Halbert	d4e9eea397	mark alarm.wake_alarm during gc sweep	2020-12-22 08:11:01 -08:00
Scott Shawcroft	6347a3fcdb	Merge pull request #3812 from microDev1/ota-s2 Support for OTA update	2020-12-21 18:46:13 -08:00
Lucian Copeland	75620884e6	Fix stubs, recv_into error	2020-12-21 13:26:43 -05:00
Lucian Copeland	32736dd2c3	Implement server API	2020-12-20 17:12:03 -05:00
microDev	ecd7c0878e	expose wake pin parameter and more tweaks	2020-12-19 20:54:36 +05:30
Jeff Epler	6c4df5a8b4	adafruit_bus_device: Don't transmit STOP condition in write_then_readinto Closes #3795	2020-12-18 11:13:54 -06:00
microDev	8eaf2b0c19	implement touch alarm	2020-12-18 12:54:36 +05:30
microDev	4512290ba0	Merge branch 'main' into ota-s2	2020-12-18 00:44:00 +05:30
microDev	4863413bc9	rename ota to dualbank	2020-12-18 00:34:56 +05:30
Dan Halbert	8f9cd7075e	Merge pull request #3752 from jepler/gcc10 build: Update to gcc10	2020-12-17 11:03:40 -05:00
Scott Shawcroft	1ad49d9a18	Add alarm.pin that wakes on pin level Fixes #3787	2020-12-15 18:12:59 -08:00
Jeff Epler	3c4562c3ca	camera: Provide correct forward-declaration of camera_imageformat_type This resolves the build error ``` arm-none-eabi-ld: build-spresense/libmpy.a(Camera.o):(.rodata.camera_imageformat_type+0x0): multiple definition of `camera_imageformat_type'; build-spresense/libmpy.a(__init__.o):(.rodata.camera_imageformat_type+0x0): first defined here arm-none-eabi-ld: build-spresense/libmpy.a(ImageFormat.o):(.rodata.camera_imageformat_type+0x0): multiple definition of `camera_imageformat_type'; build-spresense/libmpy.a(__init__.o):(.rodata.camera_imageformat_type+0x0): first defined here arm-none-eabi-ld: build-spresense/libmpy.a(Camera.o):(.rodata.camera_imageformat_type+0x0): multiple definition of `camera_imageformat_type'; build-spresense/libmpy.a(__init__.o):(.rodata.camera_imageformat_type+0x0): first defined here ```	2020-12-15 10:40:24 -06:00
Dan Halbert	e0afa32cfa	use RTC_DATA_ATTR; address review comments	2020-12-14 11:36:54 -05:00
BennyE	210c0ec89c	add country(code) to wifi network objects)	2020-12-13 13:32:12 +01:00
microDev	37ee5e683d	Merge branch 'main' into ota-s2	2020-12-12 05:25:46 +05:30
microDev	92098ca06b	update docs, implement suggested changes	2020-12-12 05:15:25 +05:30
Scott Shawcroft	344d3c59cb	Merge branch 'main' into msgpack	2020-12-11 11:10:30 -08:00
microDev	08e94e6a20	add more docs	2020-12-11 22:55:22 +05:30
Dan Halbert	39124b888b	doc fixes	2020-12-11 09:03:45 -05:00
Dan Halbert	cf938983e9	SleepMemory + set alarm.wake_alarm	2020-12-11 08:10:26 -05:00
Bernhard Boser	d29184b5a0	try without ... in docs	2020-12-10 12:15:43 -08:00
microDev	cb35abfd04	add docs, update translation & fix ota.flash()	2020-12-11 01:01:01 +05:30
Bernhard Boser	6d2329fb09	add blank lines after all comment sections	2020-12-10 10:59:26 -08:00
Dan Halbert	5964163649	Initial SleepMemory code	2020-12-10 13:03:40 -05:00
microDev	07015ad527	add ability to switch boot partition	2020-12-10 16:42:45 +05:30
microDev	bfa2c604ef	add ability to flash in discontinuous chunks	2020-12-10 15:45:25 +05:30
microDev	dee86a014b	factor out esp_ota_end	2020-12-10 14:04:24 +05:30
Bernhard Boser	3c724321d8	cosmetics	2020-12-09 12:01:09 -08:00
Mike Causer	eedcc98cc5	Fix some spelling mistakes	2020-12-10 02:52:18 +11:00
Bernhard Boser	a5c3dc286c	typing ...	2020-12-08 15:48:56 -08:00
Bernhard Boser	9e7a7b9dc4	uglify typing hints	2020-12-08 14:38:20 -08:00
Bernhard Boser	1f14d39364	remove two extra closing angular brackets	2020-12-08 11:50:45 -08:00
Scott Shawcroft	40118bcf57	Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786	2020-12-08 10:52:25 -08:00
Dan Halbert	1df033465a	Merge pull request #3806 from pewpew-game/rotarydoc Remove warning about lack of support on M0 from rotaryio	2020-12-08 13:20:03 -05:00
Radomir Dopieralski	2c546ab768	Remove warning about lack of support on M0 from rotaryio It seems that this warning no longer applies.	2020-12-08 15:54:34 +01:00
microDev	fc23a0cc8a	implement ota module	2020-12-08 11:30:00 +05:30
Bernhard Boser	413885a529	fix typspec in function declarations	2020-12-07 17:45:21 -08:00
Bernhard Boser	9903c9e855	fixed (?) typespec for callback functions	2020-12-07 16:50:52 -08:00
Bernhard Boser	5875a27fa8	removed extra triple quote	2020-12-07 16:32:38 -08:00
Bernhard Boser	9412c3f58e	moved misplaced triple-quote	2020-12-07 16:22:09 -08:00
Bernhard Boser	534b48fcfe	remove a ~ from doc that causes an error; add ExtType.c to circuitpy_defns.mk	2020-12-07 16:08:16 -08:00
Bernhard Boser	b5b6b6d0f2	add ExtType, update doc, add a test	2020-12-07 15:40:02 -08:00
Dan Halbert	054eafd42f	Merge pull request #3797 from dhalbert/reset-reason-run-reason-available Make ResetReason and RunReason available	2020-12-07 15:41:45 -05:00
Dan Halbert	169b487509	Include wifi.radio singleton in gc	2020-12-07 11:07:56 -05:00
Dan Halbert	9391c8f9dd	Make ResetReason and RunReason available	2020-12-06 12:00:00 -05:00
Dan Halbert	2f0e676fcb	update doc per review	2020-12-03 22:06:02 -05:00
Dan Halbert	57fa6bece8	allow radio.enabled to be settable	2020-12-03 21:27:35 -05:00
Scott Shawcroft	1130b80e2a	Merge pull request #3612 from gamblor21/bus_device Moving Adafruit_CircuitPython_BusDevice to core	2020-12-02 13:23:02 -08:00
Scott Shawcroft	608c98501b	Merge remote-tracking branch 'adafruit/main' into msgpack	2020-12-02 13:10:39 -08:00
Bernhard Boser	44bc75af37	output little endian; update example	2020-12-01 18:38:47 -08:00
Bernhard Boser	f38bd59c6b	added signatures to documenation	2020-12-01 18:38:15 -08:00
Bernhard Boser	e19782633a	removed blanks to make pre-commit check happy	2020-12-01 18:38:14 -08:00
Bernhard Boser	513253bc3f	moved logic to shared-module and added documentation	2020-12-01 18:38:14 -08:00
Bernhard Boser	90c203a3dd	add module msgpack	2020-12-01 18:38:14 -08:00
Dan Halbert	72fa7d88b8	fix doc errors	2020-12-01 20:13:46 -05:00
Dan Halbert	8b7c23c1ee	address review comments	2020-12-01 20:01:14 -05:00
gamblor21	d3bbb99e07	Fixing stubs	2020-12-01 17:49:15 -06:00
Mark	237385798c	Merge branch 'main' into bus_device	2020-12-01 15:47:16 -06:00
Dan Halbert	65e2fe4654	fix stub problems; touch up doc	2020-11-27 23:27:15 -05:00
Dan Halbert	596e0e4bd2	merge from upstream	2020-11-27 16:06:57 -05:00
Dan Halbert	e308a9ec11	working! PinAlarm not implemented yet.	2020-11-27 16:03:37 -05:00
Dan Halbert	104a089677	deep sleep working; deep sleep delay when connected	2020-11-26 22:06:37 -05:00
Jeff Epler	7923aa0a62	Merge pull request #3708 from hierophect/esp32s2-udp ESP32-S2: Add UDP with recvfrom_into and sendto	2020-11-25 21:11:20 -06:00
Jeff Epler	6fd123a5c4	Merge pull request #3758 from tannewt/update_connect_doc Update wifi.Radio.connect doc	2020-11-25 21:09:56 -06:00
Dan Halbert	ef0830bfe2	merge from upstream + wip	2020-11-25 17:52:06 -05:00
Dan Halbert	9dbea36eac	changed alarm.time API	2020-11-25 15:09:27 -05:00
Dan Halbert	f868cc5dd0	some API renaming and bug fixes; fix docs	2020-11-24 23:37:05 -05:00
arturo182	ca1a85c47f	displayio: Fix ColorConverter make_* methods	2020-11-25 03:39:14 +01:00
Scott Shawcroft	4ac11c8d31	Update wifi.Radio.connect doc Now it includes bssid info.	2020-11-24 17:54:39 -08:00
hierophect	510f464234	Merge branch 'main' into esp32s2-udp	2020-11-24 18:28:10 -05:00
Lucian Copeland	ba6e15b070	Fix stubs	2020-11-24 11:32:18 -05:00
microDev	9dd1783da5	Merge branch 'main' into ps2io-S2	2020-11-24 11:11:11 +05:30
Dan Halbert	7a45afc549	working, but need to avoid deep sleeping too fast before USB ready	2020-11-23 22:44:53 -05:00
Lucian Copeland	8ffd973e22	Merge remote-tracking branch 'upstream/main' into esp32s2-udp	2020-11-23 18:40:14 -05:00
Dan Halbert	3abee9b256	compiles; maybe ready to test, or almost	2020-11-22 21:52:37 -05:00
Dan Halbert	a0f1ec3c4a	wip	2020-11-22 19:10:09 -05:00
Dan Halbert	75559f35cc	wip: ResetReason to microcontroller.cpu	2020-11-21 23:29:52 -05:00
Dan Halbert	e4c66990e2	compiles	2020-11-20 23:33:39 -05:00
Dan Halbert	39e1f52e28	wip; not compiling yet	2020-11-19 17:47:12 -05:00
Dan Halbert	649c930536	wip	2020-11-19 15:43:39 -05:00
microDev	b56645808c	fix crash on user code exit	2020-11-19 11:44:22 +05:30
Dan Halbert	5bb3c321e9	merge from main	2020-11-19 00:29:14 -05:00
Dan Halbert	682054a216	WIP: redo API; not compiled yet	2020-11-19 00:23:27 -05:00
Jeff Epler	f61f8f999b	EPaperDisplay: add rotation property untested, because I don't want to mess my magtag demo up :) but it builds	2020-11-18 18:06:31 -06:00
Lucian Copeland	0bbdf05936	Implement recvfrom_into and sendto for UDP	2020-11-17 16:11:04 -05:00
Scott Shawcroft	66fb095069	Merge pull request #3667 from microDev1/watchdog-s2 ESP32S2: Support for WatchDog	2020-11-16 15:01:54 -08:00
Dan Halbert	ffff02c053	Merge remote-tracking branch 'adafruit/main' into sleep	2020-11-16 12:06:11 -05:00
Dan Halbert	bb77f1d130	wip: initial code changes, starting from @tannewt's sleepio branch	2020-11-16 11:56:20 -05:00
Scott Shawcroft	78ccac930f	Add .busy property to EPaperDisplay	2020-11-13 18:57:52 -08:00
Scott Shawcroft	8d4296f964	Add board.DISPLAY to MagTag. Fix luma computation * Initialize the EPaper display on the MagTag at start. * Tweak the display send to take a const buffer. * Correct Luma math * Multiply the blue component, not add. * Add all of the components together before dividing. This reduces the impact of truncated division.	2020-11-13 18:57:52 -08:00
Scott Shawcroft	8d3a878152	Merge pull request #3681 from adafruit/6.0.x Merge protomatter update back into `main`	2020-11-12 14:51:53 -08:00
Scott Shawcroft	9da99675b1	Correct display sequence format docs	2020-11-10 16:44:09 -08:00
Lucian Copeland	21ca1b8c2b	Merge remote-tracking branch 'upstream/main' into esp32s2-udp	2020-11-10 14:59:32 -05:00
microDev	10e8b8cf45	move port specific check	2020-11-11 00:24:01 +05:30
Jeff Epler	0ff20cdd85	RGBMatrix: Detect invalid bit_depth selection Closes: #3650	2020-11-09 08:27:46 -06:00
gamblor21	4c93db3595	Renamed to adafruit_bus_device	2020-11-03 18:35:20 -06:00
gamblor21	197539bd82	Moved I2CDevice and SPI to match python library	2020-11-03 17:30:33 -06:00
Scott Shawcroft	9bf77905e3	Merge pull request #3622 from sw23/main Fixing remaining stub mypy issues + run check-stubs to CI	2020-11-02 18:16:32 -08:00
sw23	88fcf4ef7e	Removing implementation-specific values for socket/socketpool class attributes	2020-11-02 19:59:07 -05:00
gamblor21	8bbbb2833a	Fixes from testing SPI	2020-11-01 21:38:20 -06:00
gamblor21	7dd53804a0	Fixed stubs again	2020-11-01 10:31:31 -06:00
gamblor21	76c1153380	Fixed stubs	2020-11-01 08:57:31 -06:00
gamblor21	5ea09fe348	Fixed stubs	2020-10-31 13:37:05 -05:00
gamblor21	78477a374a	Initial SPI commit	2020-10-31 12:17:29 -05:00
Dan Halbert	144eb131ae	Merge pull request #3627 from adafruit/6.0.x Merge 6.0.x bugfixes to main	2020-10-31 12:28:20 -04:00
sw23	1f179b3317	Adding socket and socketpool class attributes	2020-10-30 23:19:27 -04:00
sw23	6a63d20a5d	Fixing remaining stub mypy issues + run check-stubs to CI	2020-10-30 18:56:40 -04:00
sw23	9f3a1fe27b	Fixing stub for wifi_radio_ping	2020-10-30 01:29:58 -04:00
sw23	ad166ca479	Fixing make stub warnings and mypy issuesmak	2020-10-29 20:15:34 -04:00
gamblor21	e7da852db7	Fixing review comments	2020-10-29 16:13:03 -05:00
Scott Shawcroft	7fd73c7d39	Initial UDP work. Need to test	2020-10-28 18:08:31 -07:00
Scott Shawcroft	7cbc50962b	Merge pull request #3611 from tannewt/esp32s2_eink_portal Add Adafruit ESP EInk Portal and grayscale EInk support	2020-10-28 14:45:29 -07:00
Scott Shawcroft	9a4efed8cb	Start tweaking the workflow to sleep	2020-10-27 17:55:03 -07:00
Scott Shawcroft	85dadf3a56	More API changes	2020-10-27 16:18:39 -07:00
Scott Shawcroft	1196d4bcf6	move to new module	2020-10-27 16:18:38 -07:00
microDev	930cf14dce	Add check for invalid io, function to disable all alarms	2020-10-27 16:17:26 -07:00
microDev	e35938971a	Add description of alarm modules	2020-10-27 16:16:55 -07:00
microDev	59df1a11ad	Add alarm_touch module	2020-10-27 16:16:52 -07:00
microDev	da449723df	Fix build error	2020-10-27 16:16:15 -07:00
microDev	4d8ffdca8d	restructure alarm modules	2020-10-27 16:15:09 -07:00
microDev	e5ff55b15c	Renamed alarm modules	2020-10-27 16:13:25 -07:00
microDev	21ba61afbb	Add function to disable alarm	2020-10-27 16:13:25 -07:00
microDev	05a3f203db	Add function to get time elapsed during sleep	2020-10-27 16:13:25 -07:00
microDev	e310b871c8	Get io wake working	2020-10-27 16:13:25 -07:00
microDev	90b9ec6f2c	Initial Sleep Support	2020-10-27 16:13:22 -07:00
gamblor21	2374b0d013	Fixed whitespace issues	2020-10-27 09:13:14 -05:00
gamblor21	9ec224539b	Clean up	2020-10-27 08:43:51 -05:00
Scott Shawcroft	0d1649880f	Add grayscale EInk support	2020-10-26 16:59:59 -07:00
gamblor21	8a379830a8	Added doc and translations	2020-10-26 16:54:24 -05:00
Christian Walther	99a3750a2c	Fix lost board.SPI and board.I2C after explicitly deiniting them. After calling board.SPI().deinit(), calling board.SPI() again would return the unusable deinited object and there was no way of getting it back into an initialized state until the end of the session.	2020-10-26 22:44:38 +01:00
Jeff Epler	c9f7df3bab	canio: Give implementation-specific limits for CAN.Listen	2020-10-26 10:06:49 -05:00
gamblor21	12d770b427	Added __probe_for_device	2020-10-25 10:15:45 -05:00
gamblor21	b637d3911e	Initial commit	2020-10-24 20:48:35 -05:00
Jensen Kuras	38c8248b9e	Merge branch 'main' into color-converter-transparency	2020-10-19 18:13:44 -05:00
Scott Shawcroft	c5d8c12e34	Merge pull request #3563 from gamblor21/recv_into_size_check Add socketpool.socket.recv_into size check	2020-10-19 15:40:41 -07:00
Jensen Kuras	d2dada869c	displayio: Update docs for ColorConverter's make_opaque Co-authored-by: Scott Shawcroft <scott@tannewt.org>	2020-10-19 17:27:01 -05:00
Scott Shawcroft	d606a3e968	Merge pull request #3484 from astrobokonon/esp32s2-morenet Esp32s2: Expose more network parameters	2020-10-19 15:07:20 -07:00
Jensen Kuras	575b2e607b	Merge branch 'main' into color-converter-transparency	2020-10-16 19:55:24 -05:00
Jensen	74c07a4bdc	displayio: Add in opaque pixel option for future	2020-10-16 19:50:41 -05:00
Mark	8e6d3e5b91	Merge branch 'main' into recv_into_size_check	2020-10-16 15:52:45 -05:00
Ryan T. Hamilton	9d840aab0b	Cleaned up and now testing	2020-10-15 23:45:11 -07:00
Ryan T. Hamilton	b336039aab	Disable the long way and return an ap_info object still needs work and cleanup	2020-10-15 23:18:30 -07:00
gamblor21	fa75231ae3	Added max size check to recv_into	2020-10-15 18:46:42 -05:00
microDev	26fd2c6223	Add hostname validation	2020-10-15 16:08:01 +05:30
Jensen	b02a5bcbd5	displayio: Remove verbose error	2020-10-14 23:05:19 -05:00
Jensen	3c5a08628a	Merge branch 'color-converter-transparency' of github.com:jensechu/circuitpython into color-converter-transparency	2020-10-14 21:52:49 -05:00
Jensen	2517e4b486	displayio: ColorConverter handle if opaque color is black	2020-10-14 21:51:40 -05:00
microDev	18fbff4f57	Update wifi hostname method	2020-10-14 11:11:59 +05:30
microDev	ceb531086e	Add method to set custom hostname	2020-10-13 14:22:02 +05:30
Jensen Kuras	de9ea47e8e	Merge branch 'main' into color-converter-transparency	2020-10-12 20:48:55 -05:00
Jensen	337019626a	displayio: Add make_transparent to ColorConverter	2020-10-12 20:48:04 -05:00
Jensen	b359e2945a	displayio: Add make_transparent and make_opaque to ColorConvertor	2020-10-12 20:48:04 -05:00
Jensen	57b44928a3	displayio: Pass transparent_color to ColorConverter Signed-off-by: Jensen <jensechu@gmail.com>	2020-10-12 20:48:04 -05:00
Jeff Epler	5e38bb98cb	rgbmatrix: update protomatter to 1.0.5 tag this is compile-tested on stm32f405 feather matrixportal nrf52840 feather but not actually tested-tested.	2020-10-10 14:30:37 -05:00
Radomir Dopieralski	b227b79dec	Fix #3504 : Don't use time module in pew.tick() The time.sleep() and time.monotonic() functions break the timer interrupt on which PewPew10 display relies, so we can't use them anymore. Instead I'm adding a time-keeping function to the display code itself, which then can be used in pew.tick() internally.	2020-10-10 20:26:33 +02:00
Scott Shawcroft	375676ff58	Merge pull request #3501 from hierophect/esp32-analogin ESP32S2: Add AnalogIn	2020-10-09 14:10:24 -07:00
Ryan T. Hamilton	99f27bea61	Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet	2020-10-08 12:43:52 -07:00
Scott Shawcroft	9fcf96cb64	Replace _bleio.ConnectionError with the native version Replace uses of _bleio.ConnectionError with regular ConnectionError Fixes #3008	2020-10-07 17:11:32 -07:00
Scott Shawcroft	8c428a3bdd	Merge pull request #3492 from hierophect/esp32-update-idf ESP32S2: move to official IDF submodule	2020-10-06 16:53:32 -07:00
Lucian Copeland	68cb384f8f	Remove logging from shared-bindings, fix translations, revert config target macro	2020-10-06 13:29:12 -04:00
hierophect	e93a274f2f	Merge branch 'main' into esp32-analogin	2020-10-05 13:02:42 -04:00
Scott Shawcroft	c27e3857b6	Merge branch 'main' into framebuffer-zero-size	2020-10-01 11:04:21 -07:00
Jeff Epler	e477d27be3	Update shared-bindings/rgbmatrix/RGBMatrix.c Co-authored-by: Scott Shawcroft <scott@tannewt.org>	2020-10-01 10:59:02 -05:00
Scott Shawcroft	5ac3c36d64	Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107 New quirk for sh1107	2020-09-30 12:03:10 -07:00
Mark Roberts	9f19a8a760	Ran pre-commit locally	2020-09-30 11:06:13 -07:00
Lucian Copeland	66b8559fd4	Change submodule, rework all includes	2020-09-30 11:26:07 -04:00
Jeff Epler	88cbf772df	canio.CAN: clarify read-only status of several properties	2020-09-29 20:13:52 -05:00
Jeff Epler	e4b9c16891	rgbmatrix: Check that the number of rgb pins is supported. Having zero RGB pins may not have been caught, nor having a non-multiple-of-6 value. Generally, users will only have 6 RGB pins unless they are driving multiple matrices in parallel. No existing breakouts exist to do this, and there are probably not any efficient pinouts to be had anyway.	2020-09-29 19:55:31 -05:00
Jeff Epler	176b337611	rgbmatrix: validate width= constructor parameter In #3482, @cwalther noted that, hypothetically, a zero byte allocation could be made in the RGBMatrix constructor. Ensure that width is positive. Height was already checked against the number of RGB pins if it was specified, so zero is ruled out there as well.	2020-09-29 19:44:25 -05:00
Jeff Epler	d79f4e2662	canio: doc improvement -- don't needlessly call out deinit behavior	2020-09-29 14:32:27 -05:00
Jeff Epler	611f81ac1a	canio: actually drop the _error_count properties thanks @tannewt	2020-09-29 14:25:53 -05:00
Jeff Epler	1bea099eb2	Allow the _state_count properties to be unimplemented This is the case on the SPI implementations MCP2515 and MCP2518.	2020-09-29 14:05:50 -05:00
Jeff Epler	03bd968450	more doc improvements	2020-09-28 19:56:19 -05:00
Jeff Epler	979ec3a458	can: RemoteTransmissionRequest: remove duplicate docstrings	2020-09-28 19:47:06 -05:00
Ryan T. Hamilton	2a4a244245	Add ap_ssid and ap_bssid	2020-09-28 17:25:09 -07:00
Ryan T. Hamilton	66d55738c1	Enable DNS info	2020-09-28 16:49:20 -07:00
mdroberts1243	b1e1237887	Merge branch 'main' into New_quirk_for_SH1107	2020-09-28 19:40:47 -04:00
Jeff Epler	04e434a7ce	canio: remove stray remote_transmission_request method declaration	2020-09-28 17:22:02 -05:00
Jeff Epler	f4e36fc7f6	CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field	2020-09-28 17:22:00 -05:00
Jeff Epler	13493730a1	canio: CAN.Match: improve how an unspecified `mask` is implemented 0 should actually indicate a "match everything" filter which you otherwise couldn't indicate with any single Match object, and an all-address-bits-set number should indicate a "match single address" filter. Use an optional/default None argument to do the job.	2020-09-28 17:22:00 -05:00
Jeff Epler	4f7f1e8106	canio: CAN.listen: rename argument to 'matches', reflecting that it is a sequence	2020-09-28 17:22:00 -05:00
Jeff Epler	a4cc3ad6cb	canio: RemoteTransmissionRequest: Split implementation, keep one structure This already begins obscuring things, because now there are two sets of shared-module functions for manipulating the same structure, e.g., common_hal_canio_remote_transmission_request_get_id and common_hal_canio_message_get_id	2020-09-28 17:22:00 -05:00
Jeff Epler	ea2f5b6396	canio: Correct type annotations of CAN.send, Listener.receive	2020-09-28 17:22:00 -05:00
Jeff Epler	f4fd5bbfc4	canio: docs: fix how we refer to 'the listen method'	2020-09-28 17:22:00 -05:00
Jeff Epler	8d45be1cd9	canio: Split RemoteTransmissionRequest to its own class It reuses most of canio.Message's implementation, and structure	2020-09-28 17:22:00 -05:00
Jeff Epler	48bda589b8	Listerner: read -> receive, drop readinto This prepares for creating a separate RemoteTransmissionRequest class	2020-09-28 17:22:00 -05:00
Jeff Epler	79ca430ddf	Match: address -> id	2020-09-28 17:22:00 -05:00
Jeff Epler	8b82c239b8	canio: doc improvements	2020-09-28 17:22:00 -05:00
Ryan T. Hamilton	deefeecb45	Fix ap_rssi bound_method Forgot to make it a property!	2020-09-26 14:27:42 -07:00
Ryan T. Hamilton	b9968ea801	Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet	2020-09-26 13:37:14 -07:00
Scott Shawcroft	2c8ee08520	Merge pull request #3471 from tannewt/i2c_100k Change I2C default to 100khz	2020-09-25 14:08:25 -07:00
Scott Shawcroft	b9d68bc5a6	Change I2C default to 100khz Greater that 100khz is technically out of the original spec. Background here: https://github.com/adafruit/Adafruit_CircuitPython_CLUE/issues/36	2020-09-25 11:07:22 -07:00
askpatricw	33952023e8	Print package if it exists for pin or module only if it does not	2020-09-25 10:08:26 -07:00
Mark Roberts	06a3d15266	Mostly-working-version with comments	2020-09-24 22:07:33 -04:00
Scott Shawcroft	dd86cb00ad	Merge pull request #3448 from hierophect/esp32-sd-fix ESP32S2 - Fix SPI's SD card issue, add pin protections	2020-09-23 12:30:01 -07:00
Lucian Copeland	00517b2600	Move missing pin warning to shared-bindings	2020-09-23 11:39:39 -04:00
Jeff Epler	82f37c9252	canio: fix read(), iterable bindings	2020-09-22 10:28:25 -05:00
Jeff Epler	9fd9cf1138	canio: fix bugs in shared-bindings	2020-09-22 09:36:47 -05:00
Mark Roberts	5536e574db	Changes to compile cleanly	2020-09-21 22:08:16 -04:00
Mark Roberts	f21dc253e0	Initial commit bool column_and_page_addressing	2020-09-21 18:42:16 -04:00
Jeff Epler	10245c0ff8	canio: a few more stray _canios	2020-09-21 17:04:30 -05:00
Jeff Epler	a8147c125c	Fix unintentional cross references	2020-09-21 16:47:28 -05:00
Jeff Epler	4869dbdc67	canio: rename from _canio This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.	2020-09-21 16:44:26 -05:00
Jeff Epler	493679da3b	CAN.listen: block until a message comes in or timeout is reached	2020-09-21 16:44:26 -05:00
Jeff Epler	9e8f1820c8	canio.CAN: switch rx/tx, make both mandatory, move declarations around	2020-09-21 16:44:26 -05:00
Jeff Epler	fd9df164c0	canio: Message: remove size property This is just duplicating what len(message.data) gives you.	2020-09-21 16:44:26 -05:00
Jeff Epler	7fd6cab2ac	canio: Make both tx and rx (but not both) optional .. loopback and silent come from the (optional) constructor parameters not guessing based on the pin specification .. docstring & comment improvements	2020-09-21 16:44:26 -05:00
Jeff Epler	c39ec1581e	_canio: Message: setting data clears rtr, and vice versa	2020-09-21 16:44:26 -05:00
Jeff Epler	44c5b2bbb1	Respond to review comments Thanks @tannewt!	2020-09-21 16:44:26 -05:00
Jeff Epler	a69b298aed	Whitespace	2020-09-21 16:44:26 -05:00
Jeff Epler	27cbb690e5	_canio: Add listener matching Lightly tested: * no matches (catch-all) * standard address single address matches (even and odd positions) * standard address mask matches * only tested that extended doesn't match non-extended	2020-09-21 16:44:26 -05:00
Jeff Epler	2cb4707f92	Message: add extended address flag	2020-09-21 16:44:26 -05:00
Jeff Epler	40d4a69133	more doc improvements	2020-09-21 16:44:26 -05:00
Jeff Epler	1eb0587917	correct docstring	2020-09-21 16:44:26 -05:00
Jeff Epler	635fcadb59	_canio.CAN: add error handling & bus state	2020-09-21 16:44:26 -05:00
Jeff Epler	f8dcf2118e	_canio: Add _canio.State enum-like class	2020-09-21 16:44:26 -05:00
Jeff Epler	37af9dde90	Listener: fix doc markup, include in globals of its module	2020-09-21 16:44:26 -05:00
Jeff Epler	a2e1867f69	_canio: Minimal implementation for SAM E5x MCUs Tested & working: * Send standard packets * Receive standard packets (1 FIFO, no filter) Interoperation between SAM E54 Xplained running this tree and MicroPython running on STM32F405 Feather with an external transceiver was also tested. Many other aspects of a full implementation are not yet present, such as error detection and recovery.	2020-09-21 16:44:26 -05:00
Ryan T. Hamilton	04ffd0dca0	Add gateway, subnet, and rssi info for current connected AP ap_rssi is a bound method, which I'm not keen on, but it works	2020-09-19 13:38:04 -07:00
Dan Halbert	dfd09bba57	Merge pull request #3433 from astrobokonon/esp32s2-bssid ESP32S2: Allow connecting to specific bssid	2020-09-18 21:31:15 -04:00
Jeff Epler	28043c94b5	supervisor: Improve serial connection detection These changes remove the caveat from supervisor.runtime.serial_connected. It appears that _tud_cdc_connected() only tracks explicit changes to the "DTR" bit, which leads to disconnects not being registered. Instead: * when line state is changed explicitly, track the dtr value in _serial_connected * when the USB bus is suspended, set _serial_connected to False Testing performed (using sam e54 xplained): Run a program to show the state of `serial_connected` on the LED: ``` import digitalio import supervisor import board led = digitalio.DigitalInOut(board.LED) while True: led.switch_to_output(not supervisor.runtime.serial_connected) ``` Try all the following: * open, close serial terminal program - LED status tracks whether terminal is open * turn on/off data lines using the switchable charge-only cable - LED turns off when switch is in "charger" position - LED turns back on when switch is in Data position and terminal is opened (but doesn't turn back on just because switch position is changed)	2020-09-17 18:32:06 -05:00
Ryan T. Hamilton	1e3241ec6d	Merge branch 'main' into esp32s2-bssid	2020-09-16 17:15:01 -07:00
Ryan T. Hamilton	daa1dd278d	connect now accepts bssid	2020-09-16 16:25:17 -07:00
Dan Halbert	d774678a0f	Merge pull request #3369 from kamtom480/camera Add camera module	2020-09-16 12:29:58 -04:00
Kamil Tomaszewski	61687c81d8	camera: Pass width and height to take_picture()	2020-09-16 13:55:57 +02:00
Ryan T. Hamilton	fead60d2d8	Add BSSID to Network	2020-09-15 23:32:53 -07:00
Scott Shawcroft	3d8bac50e4	Merge pull request #3397 from tannewt/fix_size_0_bug Fix bug with socket.recv_into size == 0.	2020-09-14 14:47:28 -07:00
Kamil Tomaszewski	ce7ee58e92	camera: Update camera module	2020-09-14 13:12:20 +02:00
Kamil Tomaszewski	c2fc592c2c	camera: Change API	2020-09-14 13:11:15 +02:00
Kamil Tomaszewski	064c597b60	camera: Implement new library for camera	2020-09-14 13:11:15 +02:00
Jeff Epler	a81a2cff02	Merge pull request #3411 from jepler/ble-doc-typo _bleio: fix markup typo	2020-09-13 12:50:12 -05:00
Jeff Epler	e5122b1acf	_bleio: fix markup typo	2020-09-13 11:56:34 -05:00
Carl Karsten	2f058029e9	doc fix: remove the text about the non-existing clock specification	2020-09-12 15:25:04 -05:00
Scott Shawcroft	8f58669ddd	Fix bug with socket.recv_into size == 0. It returned 0 when it should have filled the buffer. Python reference: https://docs.python.org/3/library/socket.html#socket.socket.recv_into	2020-09-11 16:17:20 -07:00
Scott Shawcroft	9256e6b376	Merge pull request #3302 from xiongyihui/main support to get HID OUT report	2020-09-10 17:35:04 -07:00
Dan Halbert	f0bb9635bf	MIssed one change for .last_received_report	2020-09-10 14:21:36 -04:00
Dan Halbert	40f3cd3615	Change `.report` to `.last_received_report`	2020-09-10 13:26:51 -04:00
Scott Shawcroft	96cf60fbbd	Merge remote-tracking branch 'adafruit/main' into native_wifi	2020-09-03 16:34:56 -07:00
Scott Shawcroft	0b94638aeb	Changes based on Dan's feedback	2020-09-03 16:32:12 -07:00
Scott Shawcroft	5d17d6402d	Merge pull request #3366 from kmatch98/refresh_now Update refresh to force immediate redraw with `display.refresh()`	2020-09-02 16:37:46 -07:00
Scott Shawcroft	786f4ed114	Merge pull request #3344 from jepler/issue-3184 Fix RGBMatrix, FrameBufferDisplay bugs	2020-09-02 15:32:30 -07:00
Jeff Epler	17a5a85528	rgbmatrix: Move struct definition to shared-module, rename 'core' member	2020-09-02 13:34:16 -05:00
Kevin Matocha	d224183a7e	Delete trailing whitespace	2020-09-02 11:26:37 -05:00
Kevin Matocha	8256bf7ea6	Add backticks to function references in docs	2020-09-02 11:20:30 -05:00
Kevin Matocha	4b9306aa7c	Cleanup for sphinx	2020-09-01 18:10:40 -05:00
Kevin Matocha	554cc356db	Delete trailing whitespace	2020-09-01 15:43:18 -05:00
Kevin Matocha	7b6d805580	Add Optional[int] to docs string	2020-09-01 15:40:55 -05:00
Kevin Matocha	649a955a74	Modified docs to try to pass sphinx build	2020-09-01 15:02:37 -05:00
Kevin Matocha	c6529daac5	Added some backticks to clarify the docs	2020-09-01 14:44:32 -05:00
Kevin Matocha	f5015e4485	Add hanging tab to doc	2020-09-01 14:36:43 -05:00
Kevin Matocha	e14de38528	Revise .refresh input default value for target_frames_per_second to None	2020-09-01 13:57:19 -05:00
Dan Halbert	4e3cb55ce7	share more of _bleio dict; fix one doc error	2020-09-01 12:41:58 -04:00
Kevin Matocha	8be862e644	Remove trailing whitespace	2020-09-01 10:26:48 -05:00
Kevin Matocha	c4b1db006f	delete unnecessary comment	2020-09-01 09:38:57 -05:00
Kevin Matocha	fc513956be	Update refresh to force immediate redraw with display.refresh() or display.refresh(target_frames_per_second=None), even with auto_refresh=False	2020-09-01 09:36:29 -05:00
Dan Halbert	f5a5fc4c84	Fix stub; mismatched triple quotes	2020-08-30 14:59:03 -04:00
Dan Halbert	6dbd369272	merge from upstream	2020-08-30 14:39:03 -04:00
Dan Halbert	b27d511251	address review; use constructor for HCI Adapter	2020-08-30 14:06:48 -04:00
Scott Shawcroft	46dc133d04	Fix stub and doc builds	2020-08-26 17:18:16 -07:00
Scott Shawcroft	8b71e26abd	Merge remote-tracking branch 'adafruit/main' into native_wifi	2020-08-25 16:39:23 -07:00
Scott Shawcroft	380cbfba55	Add hash to Socket so it can be used in dicts	2020-08-25 16:15:45 -07:00
Scott Shawcroft	f3bc712539	Fix SocketPool radio check	2020-08-25 16:15:00 -07:00
Scott Shawcroft	1527a3ce92	Merge remote-tracking branch 'adafruit/main' into add_pwmio	2020-08-24 18:25:18 -07:00
Scott Shawcroft	5b1a1c773f	Merge pull request #3275 from kmatch98/bitmap_v2 Add `bitmap.blit` command for bitmap copy	2020-08-24 17:58:53 -07:00
Kevin Matocha	f55f2bfee1	shorten error strings	2020-08-21 21:40:46 -05:00
Kevin Matocha	7f629624db	Added hanging indents to docs per @sommersoft's suggestion	2020-08-21 20:50:15 -05:00
Kevin Matocha	983e1af33d	remove other extraneous files	2020-08-21 19:10:13 -05:00
Kevin Matocha	dc502a5f26	remove extraneous files	2020-08-21 19:08:25 -05:00
Kevin Matocha	5b6313e642	More tweaks to try to fix documentation failing	2020-08-21 16:13:18 -05:00
Kevin Matocha	f1fb2cde17	Minor tweaks to try to fix documentation failing	2020-08-21 16:12:40 -05:00
Dan Halbert	770c204d5a	sphinx fixes	2020-08-21 17:03:45 -04:00
Kevin Matocha	9a6a156512	Update documentation string with blank line	2020-08-21 15:26:50 -05:00
Scott Shawcroft	644d2ba7a2	Add more "extern" declarations for gcc10 compat gcc has tightened the restrictions on forward declarations that lack "extern". Fix them up.	2020-08-21 14:39:37 -05:00
Kevin Matocha	a9f6d147c4	Merge adafruit/main latest	2020-08-21 14:37:32 -05:00
Kevin Matocha	7e529ed4c5	Merge with latest adafruit/main	2020-08-21 14:28:24 -05:00
Kevin Matocha	3753ea3cd8	Merge remote-tracking branch 'source/main' into main	2020-08-21 14:19:58 -05:00
Kevin Matocha	24ca133396	Updating main to adafruit/main	2020-08-21 14:19:28 -05:00
Kevin Matocha	3747ea29c2	Merge remote-tracking branch 'source/main' into main	2020-08-21 14:14:38 -05:00
Scott Shawcroft	9a8b4e98bf	Add empty lines	2020-08-21 11:36:50 -07:00
Scott Shawcroft	83deea0e03	Fix copy pasta and stub build	2020-08-21 11:17:42 -07:00
Scott Shawcroft	a5b01f7361	Merge remote-tracking branch 'adafruit/main' into add_pwmio	2020-08-21 11:13:53 -07:00
Scott Shawcroft	701e80a025	Make socket reads interruptable	2020-08-21 11:00:02 -07:00
Dan Halbert	8d785cbbe5	fix stubs; make translate	2020-08-21 11:37:15 -04:00
Dan Halbert	f714f53552	Merge remote-tracking branch 'adafruit/main' into ble_hci	2020-08-21 10:45:05 -04:00
Dan Halbert	0e30dd8bcc	merge from upstream; working; includes debug_out code for debugging via Saleae for posterity	2020-08-20 20:29:57 -04:00
Scott Shawcroft	400701004b	Merge pull request #3279 from hierophect/esp32-pulseinout ESP32-S2: Add PulseOut and PulseIn	2020-08-20 11:24:08 -07:00
Scott Shawcroft	80b15f6b3b	Add error handling w/temp debug logs	2020-08-19 17:51:33 -07:00
Scott Shawcroft	eb8b42aff1	Add basic error handling	2020-08-19 14:23:28 -07:00
Scott Shawcroft	dcc42f6281	Remove debug prints	2020-08-19 14:23:28 -07:00
Scott Shawcroft	b3a449c276	Turn on json and enable socket.close	2020-08-19 14:23:28 -07:00
Scott Shawcroft	430530c74b	SSL works until it runs out of memory	2020-08-19 14:23:28 -07:00
Scott Shawcroft	eb2c38825e	HTTP works with my adafruit_requests	2020-08-19 14:23:18 -07:00
Scott Shawcroft	c9ece21c28	SocketPool stubbed out	2020-08-19 14:22:13 -07:00
Scott Shawcroft	7bdd243bf6	Ping works!	2020-08-19 14:22:13 -07:00
Scott Shawcroft	3860991111	Ping work and start to add socketpool	2020-08-19 14:22:13 -07:00
Scott Shawcroft	c53a72d3f5	Fix ipaddress import and parse ipv4 strings	2020-08-19 14:22:13 -07:00
Scott Shawcroft	c62ab6e09a	Add ipaddress	2020-08-19 14:22:12 -07:00
Scott Shawcroft	ddcff85fa2	Add debugging. Scanning doesn't crash but returns no results. Need to config station.	2020-08-19 14:22:12 -07:00
Scott Shawcroft	1a6f4e0fe0	Scanning WIP. Need to sort out supervisor memory	2020-08-19 14:22:12 -07:00
Scott Shawcroft	c5b8401a15	First crack at native wifi API	2020-08-19 14:21:59 -07:00
Yihui Xiong	9aca580195	fix	2020-08-19 21:33:51 +08:00
Yihui Xiong	8bab7b664c	support to get HID OUT report	2020-08-19 20:18:17 +08:00
Scott Shawcroft	6857f98426	Split pulseio.PWMOut into pwmio This gives us better granularity when implementing new ports because PWMOut is commonly implemented before PulseIn and PulseOut. Fixes #3211	2020-08-18 13:08:33 -07:00
Lucian Copeland	da75445cd5	Style changes, reposition runtime errors	2020-08-18 11:42:06 -04:00
Dan Halbert	6e5c2b3fe2	Merge pull request #3260 from rhooper/pixelbuf-iterable Make pixelbuf support iterables and floats	2020-08-17 11:56:31 -04:00
Kevin Matocha	6c199c5d69	Update documentation to remove whitespaces	2020-08-15 15:58:04 -05:00
Dan Halbert	1c8e11b2cb	bug in char get_value; raise NotImpl; better arg validation	2020-08-14 23:38:58 -04:00
Lucian Copeland	0fc730bc5a	Expand PulseOut API, debug cleanup	2020-08-14 16:36:02 -04:00
Kevin Matocha	bfa9904f3e	Corrected erroneous edit to fill description to -> None	2020-08-14 14:28:06 -05:00
Kevin Matocha	e84723abba	Bug fixes related to input parameter handling x1,y1. Update comments	2020-08-14 14:22:34 -05:00
Kevin Matocha	b1fce9e933	Deleted trailing whitespace	2020-08-14 13:36:59 -05:00
Kevin Matocha	a66ef32da2	Added inclusive indexing for x2,y2, fixed default value handling for x1,y1, added bitmap palette comparison	2020-08-14 13:15:01 -05:00
Margaret Matocha	824f47d6e9	Added bitmap.blit function for bitmap slice copy	2020-08-14 12:59:57 -05:00
Margaret Matocha	4ba9ff892c	Added bitmap.blit function for copying slices of bitmaps	2020-08-14 12:59:48 -05:00
Lucian Copeland	f9512983ff	Add PulseOut	2020-08-14 12:21:41 -04:00
Yihui Xiong	52990a332d	fix	2020-08-14 17:48:15 +08:00
Kevin Matocha	14f5d03b6d	bringing up to date	2020-08-13 18:59:00 -05:00
Scott Shawcroft	ff5902f9f8	Merge branch 'main' into pixelbuf-iterable	2020-08-13 11:55:51 -07:00
Yihui Xiong	e7da652711	able to change ble mac address	2020-08-13 16:54:29 +08:00
Jeff Epler	c1400bae9b	sharpmemory: Implement support for Sharp Memory Displays in framebufferio	2020-08-12 07:32:18 -05:00
Jeff Epler	9c4f644641	framebufferio: add dirty row tracking	2020-08-12 07:32:18 -05:00
Dan Halbert	06f3b4048a	fix #3228 for nrf; still needs to be fixed for HCI; tested	2020-08-11 16:21:16 -04:00
Roy Hooper	1b7709f325	use the stack	2020-08-10 18:42:05 -04:00
Roy Hooper	ef1782f85e	fix trailing whitespace	2020-08-10 12:04:44 -04:00
Roy Hooper	00a3a25b94	revert error to avoid translation changes	2020-08-08 18:40:45 -04:00
sommersoft	ce9bc1258a	support_matrix.rst: pre-process space chars in internal link names; would cause a no-id situation when names like 'ndGarage[n°] Bit6: FeatherSnow-v2' were parsed.	2020-08-08 11:37:49 -05:00
Dan Halbert	0f4b969d62	discovery of Nordic UART service working	2020-08-08 00:29:37 -04:00
sommersoft	c374368053	support_matrix.rst: add internal links to boards in the table	2020-08-07 22:52:34 -05:00
Roy Hooper	e73dba21d2	make pixelbuf handle floats and iterables	2020-08-07 18:42:06 -04:00
Margaret Matocha	64c9baa6aa	Added bitmap.insert function for slice copy into a bitmap from another bitmap	2020-08-07 15:46:00 -05:00
Jeff Epler	354edd9431	Merge pull request #3252 from ciscorn/pyi Some improvements to the core module docs	2020-08-07 10:11:40 -05:00
Taku Fukada	56c898da80	Modify some Python stubs	2020-08-07 01:01:28 +09:00
Taku Fukada	887eb3b6d9	Apply a Sphinx transform to make the core module docs look better	2020-08-07 00:01:31 +09:00
Jeff Epler	93b373d617	"pop from empty %q" Saves 12 bytes code on trinket m0	2020-08-04 18:42:09 -05:00
Jeff Epler	c37a25f0e5	Use qstrs to save an additional 4 bytes	2020-08-04 14:45:45 -05:00
Jeff Epler	dddd25a776	Combine similar strings to reduce size of translations This is a slight trade-off with code size, in places where a "_varg" mp_raise variant is now used. The net savings on trinket_m0 is just 32 bytes. It also means that the translation will include the original English text, and cannot be translated. These are usually names of Python types such as int, set, or dict or special values such as "inf" or "Nan".	2020-08-04 13:34:29 -05:00
Dan Halbert	0a60aee3e4	wip: compiles	2020-08-02 11:36:38 -04:00
Jeff Epler	d69f081c04	Merge remote-tracking branch 'origin/main' into blm_badge	2020-07-30 07:24:48 -05:00
Christian Walther	8498e7f2cd	Fix inability to set values in 32-bit Bitmap.	2020-07-30 00:35:25 +02:00
Scott Shawcroft	5e86262694	Merge pull request #3187 from jepler/ulab-restructure-document Upgrade ulab	2020-07-29 10:48:27 -07:00
Scott Shawcroft	05a1519e5d	Merge pull request #3214 from kmatch98/bitmap_write Updated Group.c to correct bug with insert into displayio.Group	2020-07-29 10:46:33 -07:00
Jeff Epler	9b8df7f635	Upgrade ulab This version * moves source files to reflect module structure * adds inline documentation suitable for extract_pyi * incompatibly moves spectrogram to fft * incompatibly removes "extras" There are some remaining markup errors in the specific revision of extmod/ulab but they do not prevent the doc building process from completing.	2020-07-28 16:57:48 -05:00
Margaret Matocha	0887bc2112	Updated to remove else statment, attempt to remove excess mpy-cross... file	2020-07-28 15:03:51 -05:00
Margaret Matocha	076c5f946f	Updated to remove unnecessary else statement	2020-07-28 14:53:50 -05:00
Margaret Matocha	fd7801415a	Deleted mpy-cross file	2020-07-28 14:53:09 -05:00
Dan Halbert	aa97ea2501	Merge remote-tracking branch 'adafruit/main' into blm_badge	2020-07-28 14:15:02 -04:00
Dan Halbert	e5e132a364	add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT	2020-07-28 11:49:54 -04:00
Margaret Matocha	db26e894fb	Updated Group.c to correct bug with insert into groups	2020-07-27 22:25:21 -05:00
Taku Fukada	d356581651	Fix several type hints	2020-07-27 18:05:13 +09:00
Taku Fukada	54a342a7f5	Add and correct some type hints	2020-07-24 18:20:03 +09:00
Scott Shawcroft	543708416b	Merge pull request #3195 from tannewt/remove_i2c_stop Remove stop kwarg from I2C writeto.	2020-07-23 14:39:51 -07:00
Scott Shawcroft	4b6e02949d	Remove stop kwarg from I2C writeto. Fixes #2082	2020-07-23 11:06:14 -07:00
Scott Shawcroft	2bd6d05663	Add externs. GCC10 complains about duplicate defines	2020-07-22 16:26:46 -07:00
Scott Shawcroft	049921fec8	Merge branch 'main' into memmonitor	2020-07-22 14:00:28 -07:00
Scott Shawcroft	1ec3580946	Merge branch 'main' into memmonitor	2020-07-22 12:24:19 -07:00
Scott Shawcroft	eb24653d3f	Fix BluetoothError doc typo we copied	2020-07-21 18:30:29 -07:00
Scott Shawcroft	ee019a96ba	Updates based on review	2020-07-21 16:08:41 -07:00
dherrada	9e3fa863f1	Merge branch 'main' into type_hints	2020-07-21 16:18:51 -04:00
Scott Shawcroft	0c6935e336	Merge branch 'main' into disable_network	2020-07-20 16:28:22 -07:00
Kenny	efeae0d84f	fix 3169: Polygon.points property The getter for vectorio.Polygon#points was not updated with the data type change of the stored points list. This moves the implementation to shared_module and updates the data type to reflect the actual state.	2020-07-19 12:27:35 -07:00
Scott Shawcroft	610e0171aa	Disable existing native networking. We're moving towards a co-processor model and a Wiznet library is already available. New native APIs will replace these for chips with networking like the ESP32S2 but they won't be these.	2020-07-17 17:43:02 -07:00
Scott Shawcroft	07f031c708	Add ignore() and fix docs	2020-07-17 17:15:04 -07:00
Scott Shawcroft	a1e4814a27	Get AllocationAlarm working	2020-07-17 17:15:03 -07:00
Scott Shawcroft	518d909b2c	Add memorymonitor module	2020-07-17 17:15:03 -07:00
dherrada	612c6bb86b	Merge branch 'main' into type_hints	2020-07-17 14:55:30 -04:00
dherrada	d64b4e3059	Made more requested changes	2020-07-17 14:53:51 -04:00
Dan Halbert	6494bbdc64	snapshot	2020-07-16 23:14:49 -04:00
dherrada	bfcaa4b2b4	Made requested changes in displayio	2020-07-16 16:11:22 -04:00
Dan Halbert	b08b0264cc	back to working; check for extended advertising support	2020-07-15 09:46:13 -04:00
Scott Shawcroft	08375c7930	Merge pull request #2780 from AndrewR-L/patch-1 busio/UART: Correct and clarify readline() return.	2020-07-13 16:29:58 -07:00
Scott Shawcroft	51c888d4be	Merge pull request #3003 from Flameeyes/master License tagging according to REUSE specifications.	2020-07-13 16:28:49 -07:00
Dan Halbert	f6869c69c5	wip: advertising; not tested	2020-07-12 19:45:23 -04:00
Dan Halbert	f03045b97e	address working; improved pkt dump	2020-07-08 23:15:48 -04:00
Jeff Epler	6d97f6fccc	audioio: Remove compatibility code These items were aliased from audiocore to audioio for compatibility with 4.x, but according to our deprecation schedule can be removed in 6.0.	2020-07-08 20:31:35 -05:00
Dan Halbert	a5ab2829eb	use zephyr include files; wip: compiles	2020-07-08 09:33:41 -04:00
Diego Elio Pettenò	34b4993d63	Add license to some obvious files.	2020-07-06 19:16:25 +01:00
dherrada	bce77adecd	Added type hints previously missed	2020-07-03 16:03:19 -04:00
dherrada	9911b64fa1	Added type hints to ustack	2020-07-03 15:52:53 -04:00
dherrada	657c651e0e	Added type hints to uheap	2020-07-03 15:51:39 -04:00
dherrada	4c5a9d1e3a	Added type hints to time	2020-07-03 15:49:51 -04:00
dherrada	4758081e10	Added type hints to struct	2020-07-03 15:45:29 -04:00
dherrada	45b6e0174e	Added type hints to storage	2020-07-03 15:38:40 -04:00
dherrada	a88004e509	Added type hints to rtc	2020-07-03 15:27:11 -04:00
dherrada	97d405e109	Added type hints to random	2020-07-03 15:25:58 -04:00
dherrada	e237dfe3c5	Added type hints to os	2020-07-03 15:18:44 -04:00
dherrada	aaa550b33e	Added type hints to network	2020-07-03 15:10:56 -04:00
dherrada	9122d0b9f4	Added type hints to multiterminal	2020-07-03 15:08:16 -04:00
dherrada	591cc1a243	Added type hints to math	2020-07-03 15:04:43 -04:00
dherrada	f56deb60c6	Added type hints to _eve	2020-07-03 14:48:16 -04:00
dherrada	d0d949cd24	Made every init return None	2020-07-03 14:23:34 -04:00
dherrada	d358c915c3	Fixed init formatting	2020-07-03 14:00:06 -04:00
dherrada	3df03a5650	Made most of the requested changes	2020-07-03 13:49:00 -04:00
dherrada	843ff5d302	Added type hints to wiznet	2020-07-03 11:44:16 -04:00
dherrada	5163618d23	Added type hints to watchdog	2020-07-03 11:42:07 -04:00
dherrada	9c842c5a67	Added type hints to usb_midi	2020-07-03 11:40:20 -04:00
dherrada	e089862a6c	Added type hints to usb_hid	2020-07-03 11:38:02 -04:00
dherrada	0a657091c6	Added type hints to touchio	2020-07-03 11:34:45 -04:00
dherrada	f8229372bd	Added type hints to terminalio	2020-07-03 11:31:57 -04:00
dherrada	6e4c76a926	Added type hints to _stage	2020-07-03 11:26:48 -04:00
dherrada	9116470fd7	Added type hints to socket	2020-07-03 11:24:53 -04:00
dherrada	71ec419da6	Added type hints to sdioio	2020-07-03 11:16:41 -04:00
dherrada	48443ce02b	Added type hints to sdcardio	2020-07-03 11:15:22 -04:00
dherrada	d9a98bd05c	Added type hints to rotaryio	2020-07-03 11:13:16 -04:00
dherrada	c8437e6595	Added type hints to rgbmatrix	2020-07-03 11:10:13 -04:00
dherrada	93d20077cc	Added type hints to pulseio	2020-07-03 11:04:03 -04:00
dherrada	a2c7e2795b	Added type hints to ps2io	2020-07-03 10:51:39 -04:00
dherrada	41f12a7a6c	Added type hints to pixelbuf	2020-07-03 10:47:44 -04:00
dherrada	e273b9a11f	Added type hints to _pew	2020-07-03 10:42:57 -04:00
dherrada	0abf45a446	Added type hints to nvm	2020-07-03 10:37:55 -04:00
dherrada	0a8d9eed45	Added type hints to microcontroller	2020-07-03 10:33:28 -04:00
dherrada	2e8b8c7b95	Added type hints to i2cperipheral	2020-07-03 10:29:39 -04:00
dherrada	6a3968d805	Added type hints to gnss	2020-07-03 10:26:31 -04:00
dherrada	d73348f673	Added type hints to gamepadshift	2020-07-03 10:19:34 -04:00
dherrada	ff8604bb82	Added type hints to gamepad	2020-07-03 10:17:35 -04:00
dherrada	51841447be	Added type hints to frequencyio	2020-07-03 10:14:40 -04:00
dherrada	ca0e8ea1eb	Added type hints to framebufferio	2020-07-03 10:12:04 -04:00
dherrada	48ea2271b7	Added type hints to fontio	2020-07-03 10:08:25 -04:00
dherrada	783cc4de39	Added type hints to displayio	2020-07-03 10:05:14 -04:00
Scott Shawcroft	70fdde4aaa	Remove trailing space	2020-07-02 15:11:40 -07:00
dherrada	9b4ffc0571	Changed unions to ReadableBuffer and WriteableBuffer	2020-07-02 17:47:52 -04:00
Scott Shawcroft	c33542f978	Merge branch 'main' into patch-1	2020-07-02 13:56:09 -07:00
dherrada	dd27fdfbe3	Added type hints to countio	2020-07-02 14:15:43 -04:00
dherrada	51fd286cbf	Added type hints to board	2020-07-02 14:14:05 -04:00
dherrada	26f1fd0071	Added type hints to _bleio	2020-07-02 14:11:25 -04:00
dherrada	54cb1feea0	Removed all 'self, )'	2020-07-02 13:28:36 -04:00
dherrada	522b17ca93	Made suggested changes	2020-07-02 13:25:07 -04:00
dherrada	ac113fdc81	Changed bytearray to a union	2020-07-02 12:39:17 -04:00
dherrada	ffc5f0c338	Added type hints to bitbangio	2020-07-02 12:37:03 -04:00
dherrada	ed476a417c	Added type hints to audiopwmio	2020-07-02 12:07:03 -04:00
dherrada	e114b31a7a	Added type hints to audiomp3	2020-07-02 12:02:21 -04:00
dherrada	24bca06db0	Added type hints to audiomixer	2020-07-02 12:02:13 -04:00
dherrada	3d1e0051e6	Added type hints to audioio	2020-07-02 12:02:07 -04:00
dherrada	b26ee6c1f6	Added type hints to audiocore	2020-07-02 12:02:02 -04:00
dherrada	2681bd52b5	Did audiobusio	2020-07-02 11:33:18 -04:00
dherrada	627ecadb3f	Did aesio	2020-07-02 11:10:53 -04:00
dherrada	cb259de5ef	Did busio, fixed up analogio	2020-07-02 10:23:17 -04:00
dherrada	6fd6747e9e	Added type hints for analogio	2020-07-02 09:36:22 -04:00
Jeff Epler	fcddfd0f39	Merge pull request #3083 from tannewt/esp32s2_busio Add busio support for the ESP32-S2	2020-07-01 21:02:08 -05:00
Jeff Epler	e33accae4d	ulab: document sosfilt	2020-07-01 10:15:09 -05:00
Dan Halbert	11cb3e3b4b	hci skeleton done; not working yet	2020-06-30 23:19:40 -04:00
Dan Halbert	f879114c43	do HCI pin init in Python, not here	2020-06-26 19:27:05 -04:00
Dan Halbert	1bc2e979eb	wip; compiles; much commented out	2020-06-26 17:23:20 -04:00
Jeff Epler	472a04ba4b	sdioio: Remove junk in comments	2020-06-26 13:17:00 -05:00
Jeff Epler	0f2fb93d14	Update shared-bindings/sdcardio/SDCard.c Co-authored-by: Scott Shawcroft <scott@tannewt.org>	2020-06-26 13:15:30 -05:00
Jeff Epler	05837b2841	sdioio: Add shared-bindings There is no implementation yet.	2020-06-26 11:50:25 -05:00
Jeff Epler	159728b550	shared-bindings: Factor out validate_list_is_free_pins This will ultimately be used by SDIO, where a variable length list of data lines is called for.	2020-06-26 11:50:24 -05:00
Jeff Epler	57fde2e07b	sdcardio: implement new library for SD card I/O Testing performed: That a card is successfully mounted on Pygamer with the built in SD card slot This module is enabled for most FULL_BUILD boards, but is disabled for samd21 ("M0"), litex, and pca10100 for various reasons.	2020-06-26 11:50:23 -05:00
Dan Halbert	759929c24a	hci early wip; refactor supervisor bluetooth.c for nrf: tested	2020-06-25 20:57:17 -04:00
Jeff Epler	1d2cc0b968	I2CPeripheral: Rename class and its module This is an incompatible change.	2020-06-25 11:44:19 -05:00
Jeff Epler	9110e36636	Use main/selected terminology in docstrings Also copy some notes from busio docstrings to bitbangio docstrings	2020-06-25 11:42:23 -05:00
Scott Shawcroft	c5fa9730a8	Compiles!	2020-06-24 12:47:59 -07:00
Scott Shawcroft	a26102607e	Add UART support	2020-06-24 12:47:58 -07:00
Kamil Tomaszewski	ab4c09cea7	gnss: Add timestamp	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	3509dad5b3	gnss: Remove start and stop	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	c49f4bcc85	gnss: add a comment about the units	2020-06-24 11:14:44 +02:00
Kamil Tomaszewski	84f424f631	gnss: Implement new library for GNSS	2020-06-24 11:14:44 +02:00
Jeff Epler	a580f0f1c4	_pew: move to common-hal I noticed that this code was referring to samd-specific functionality, and isn't enabled except in one samd board (pewpew10). Move it. There is incomplte support for _pew in mimxrt10xx which then caused build errors; adding a #if guard to check for _pew being enabled fixes it. The _pew module is not likely to be important on mimxrt but I'll leave the choice to remove it to someone else.	2020-06-22 10:45:27 -05:00
Jeff Epler	32a29ffdff	shared-bindings: Change docstrings with '\x...' chars to raw strings Closes: #3032	2020-06-14 13:05:08 -05:00
Jeff Epler	3c3cad5ae6	docs: Improve 5.0.x <-> main branch doc linkrot This improves, but does not entirely fix, the broken links that result from the autoapi change. It fixes module-level links, but class links still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x) is now just /shared-bindings/displayio/#displayio.Palette).	2020-06-14 11:12:35 -05:00
Diego Elio Pettenò	dd5d7c86d2	Fix up end of file and trailing whitespace. This can be enforced by pre-commit, but correct it separately to make it easier to review.	2020-06-03 10:56:35 +01:00
Scott Shawcroft	959f7297da	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-06-01 17:01:16 -07:00
Scott Shawcroft	a170c5e13a	Merge branch 'master' into update-ulab	2020-06-01 15:19:21 -07:00
Scott Shawcroft	323cca8910	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-06-01 15:18:12 -07:00
Jeff Epler	8af77cb91f	ulab: docs: Fix markup error	2020-06-01 11:02:51 -05:00
Jeff Epler	5061405eb3	fix spelling	2020-06-01 09:16:55 -05:00
Jeff Epler	18c659780e	ulab: update .. add new modules and functions to our shared-bindings stubs	2020-06-01 09:02:29 -05:00
Jeff Epler	89bd87d9fc	shared-bindings: Fix docs of storage.VfsFat This is almost, but not entirely, a whitespace change. "..." was missing or mis-placed in several places The invalid syntax 'def f(self, ):' was used in several places.	2020-05-31 10:35:42 -05:00
Scott Shawcroft	2fd7a43f2f	Merge remote-tracking branch 'adafruit/master' into wdt-nrf	2020-05-29 10:16:24 -07:00
Jeff Epler	90571e7b7f	Various doc examples: Fix the "/ 18" copypasta bug	2020-05-27 16:43:35 -05:00
Scott Shawcroft	1ed4978620	Remove NONE from mode enum and doc tweaks	2020-05-27 10:58:21 -07:00
Sean Cross	aac5a4f178	watchdog: use common_hal_watchdog_* pattern This pulls all common functionality into `shared-bindings` and keeps platform-specific code inside `nrf`. Additionally, this performs most validation in the `shared-bindings` site. The only validation that occurs inside platform-specific `common-hal` code is related to timeout limits that are platform-specific. Additionally, all documentation is now inside the `shared-bindings` directory. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:38:29 +08:00
Sean Cross	dbf1bef56a	watchdog: support catching the timeout With this patch, the exception can now be caught: import microcontroller import watchdog import time wdt = microcontroller.watchdog wdt.timeout = 5 while True: wdt.mode = watchdog.WatchDogMode.RAISE print("Starting loop -- should exit after five seconds") try: while True: time.sleep(10) # pass # This also works for a spinloop except watchdog.WatchDogTimeout as e: print("Watchdog Expired (PASS)") except Exception as e: print("Other exception (FAIL)") print("Exited loop") This prints: Starting loop -- should exit after five seconds Watchdog Expired (PASS) Starting loop -- should exit after five seconds Watchdog Expired (PASS) Starting loop -- should exit after five seconds Watchdog Expired (PASS) Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:50 +08:00
Sean Cross	c7efc94a33	watchdog: move timeout exception to shared-bindings Make this exception globally available to all platforms that have enabled the watchdog timer. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	08362c9cab	watchdogtimer: refactor to new api This refactors the WatchDogTimer API to use the format proposed in https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632268227 Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	87737fb50a	watchdog: fix documentation build error Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	595f6387c2	watchdog: rename module from `wdt` and move to `microcontroller` This also places it under the `microcontroller` object. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:49 +08:00
Sean Cross	f4719609f7	wdt: add watchdog support This adds shared bindings for a watchdog timer, based on the API provided by micropython. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-27 11:28:48 +08:00
Dan Halbert	3574670226	Merge pull request #2931 from tannewt/esp32s2_digitalio Finish digitalio and pin use tracking for ESP32S2	2020-05-26 19:18:45 -04:00
Scott Shawcroft	2ffd70417d	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-26 13:09:57 -07:00
Roy Hooper	d13d0244ec	Adjust docs to reflect behaviour.	2020-05-24 20:39:53 -04:00
George Waters	c592a2b4db	Simplify pixelbuf set_pixels function	2020-05-22 21:19:17 -04:00
George Waters	f078055f59	Use mp_int_t for setting pixelbuf slice indices When handling negative steps, start and stop need to be mp_int_t so they can be checked against a potential negative value during the for loop used to set the slice values.	2020-05-22 16:28:09 -04:00
George Waters	16ffc731f3	Implement negative step for pixelbuf slices	2020-05-21 21:57:45 -04:00
Scott Shawcroft	3bb6a32a20	Merge branch 'master' into esp32s2_digitalio	2020-05-21 08:52:39 -07:00
George Waters	02d0881fca	Fix error when getting a pixelbuf slice	2020-05-20 17:56:08 -04:00
Scott Shawcroft	ba724fffb4	Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio	2020-05-20 10:48:27 -07:00
Scott Shawcroft	49090d1378	Fully implement digitalio and pin-in-use tracking. Fixes #2901	2020-05-19 17:46:29 -07:00
Sean Cross	34f91f01c6	bleio: adapter: add advertising timeout and status Add a field to allow specifying a timeout when initiating advertising. As part of this, add a new property to determine if the device is still advertising. Additionally, have the `anonymous` property require a timeout, and set the timeout to the maximum possible value if no timeout is specified. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 15:01:19 +08:00
Sean Cross	cfe65742a3	_bleio: support anonymous advertising Add a new parameter to the `start_advertising()` function to enable anonymous advertising. This forces a call to `sd_ble_gap_privacy_set()` with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and `private_addr_type` set to `BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`. With this, addresses will cycle at a predefined rate (currently once every 15 minutes). Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-19 15:01:18 +08:00
Scott Shawcroft	2c2b53303d	Merge pull request #2837 from k0d/serial-debug Add support for a debug console, such as ST-Link VCP.	2020-05-18 18:13:31 -07:00
Mark Olsson	007c92ee6a	Enable showing the console on a debug uart	2020-05-19 02:02:52 +02:00
warriorofwire	dde66cadde	remove a duplication in polygon.c	2020-05-18 13:32:06 -07:00
warriorofwire	4bbb80e31a	vectorio: speed up polygon This change takes polygon from 126k pixels per second fill to 240k pps fill on a reference 5 point star 50x66px polygon, updating both location and shape at 10hz. Tested on an m4 express feather. As a curiosity, the flat-out fill rate of a shape whose get_pixel is `return 0;` fills just shy of 375k pixels per second.	2020-05-18 13:32:06 -07:00
ppolk-nocimed	c6406c74ec	Added DigitalInOut suggestion	2020-05-16 13:21:34 -07:00
ppolk-nocimed	f76ff1eb69	Fixed Optional[Pull]	2020-05-16 13:14:50 -07:00
ppolk-nocimed	db924fb01e	Digital In Out Type Hints	2020-05-16 12:47:49 -07:00
Thea Flowers	7d167560af	Note that nvm.ByteArray is available at microcontroller.nvm Fixes #2766	2020-05-15 14:53:14 -07:00
Scott Shawcroft	0d8bca92e2	Merge pull request #2810 from dherrada/master Pyi integration	2020-05-15 10:31:05 -07:00
Sean Cross	f9ed3acf6d	aesio: specify writable buffers for destination buffers When calling `AES.decrypt_into()` or `AES.encrypt_into()`, the destination buffers may be any buffer kind. However, we currently aren't checking to make sure the destination buffer is actually writable. Specify `MP_BUFFER_WRITE` for the destination buffers of both of these objects so we don't inadvertently write to immutable data. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-15 10:22:42 +08:00
Sean Cross	aba36e4abf	aesio: use bufinfo rather than mp_str_bytes In order to accept both `bytes` objects and `bytearray` objects, use a `bufinfo` construct to retrieve the data rather than `mp_obj_str_get_data()`. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-15 10:16:00 +08:00
Scott Shawcroft	15c2d16bf9	Fix help doc	2020-05-14 16:06:13 -07:00
Scott Shawcroft	afc84c2fd1	Fix ulab, math and template.	2020-05-14 15:58:36 -07:00
dherrada	b477c4812d	Fixed minor indentation issue	2020-05-14 16:58:25 -04:00
Scott Shawcroft	db4dbe0752	Merge pull request #2889 from jepler/gamepad-tick Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick	2020-05-13 11:53:23 -07:00
Scott Shawcroft	3ffa5604fc	Update countio to python stub docs	2020-05-13 08:36:16 -07:00
Scott Shawcroft	7546d47f77	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-13 08:23:55 -07:00
Jeff Epler	23ba58bbf5	Gamepad & GamepadShift: Initially allocate as long-lived This makes less heap churn and decreases code size a tiny bit	2020-05-13 10:14:37 -05:00
Jeff Epler	fbf052bb27	Gamepad & GamepadShift: Enable ticks while object exists Otherwise, button presses might not be noticed.	2020-05-13 10:14:37 -05:00
Scott Shawcroft	4e646ee6e4	Move vectorio to stubs	2020-05-12 18:40:02 -07:00
Scott Shawcroft	cde6651721	Merge remote-tracking branch 'adafruit/master' into improve_verification	2020-05-12 18:23:59 -07:00
Scott Shawcroft	277e8d528b	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 18:22:57 -07:00
Scott Shawcroft	4e8de3c554	Swap sphinx to autoapi and the inline stubs	2020-05-12 17:28:24 -07:00
Scott Shawcroft	d274074f01	Merge remote-tracking branch 'adafruit/master' into vectorio	2020-05-12 12:29:05 -07:00
Scott Shawcroft	bc40034a08	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 12:12:51 -07:00
Scott Shawcroft	a1091bbfbb	Merge pull request #2871 from DavePutz/Issue2812 Throw a NotImplementedError for time functions on boards without long ints	2020-05-12 11:40:49 -07:00
dherrada	c534a872a2	Merge branch 'master' into master	2020-05-12 12:26:02 -04:00
dherrada	6490137812	Did usb_hid, usb_midi, ustack, wiznet	2020-05-12 12:08:46 -04:00
dherrada	e4589543fb	Did time, touchio, uheap	2020-05-12 11:43:24 -04:00
dherrada	991045b9ce	Did struct, supervisor, terminalio	2020-05-12 11:28:33 -04:00
Daniel Pollard	22bf99ccc4	Fixed underline in documentation	2020-05-12 14:52:48 +10:00
Daniel Pollard	ee2cb703c8	merged master	2020-05-12 14:41:28 +10:00
warriorofwire	78444a1018	fix VectorShape on_dirty callback registration being set for the wrong type	2020-05-11 21:21:05 -07:00
warriorofwire	040beb0577	Clean up circle documentation	2020-05-11 21:15:40 -07:00
DavePutz	4712f9f104	Merge branch 'master' into Issue2812	2020-05-11 21:48:54 -05:00
Scott Shawcroft	1b0c52c8ca	Merge pull request #2877 from rhooper/pixelbuf-doc-fix Pixelbuf doc fix	2020-05-11 15:42:33 -07:00
dherrada	603df58f97	Did stage, socket, storage	2020-05-11 13:40:02 -04:00
dherrada	c7a9d49cba	Did rgbmatrix, rotaryio, and RTC	2020-05-11 13:00:19 -04:00
dherrada	838b6c5685	Did ps2io, pulseio, random	2020-05-11 10:48:11 -04:00
warriorofwire	eb3d5fa453	ujson: do not eat trailing whitespace Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers. When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout. Fixes: - Waiting for a timeout after you have completed reading a correct and complete JSON off the input. - Raising an OSError after reading a correct and complete JSON off the input. - Eating more data than semantically owned off the input buffer. - Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object. Code you would write before: ``` line = board_busio_uart_port.read_line() json_dict = json.loads(line) ``` or reaching for fixed buffers and swapping them around in Python. Code that did not work before that does now: ``` json_dict = json.load(board_busio_uart_port) ``` - This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs. - It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA. - It simplifies code that users write while improving their apps.	2020-05-10 20:45:42 -07:00
Roy Hooper	09fedb3fd5	fix another doc error (pixelsx - thanks @theacodes)	2020-05-10 21:35:37 -04:00
Roy Hooper	70f2ef3f8e	Fix docs some more	2020-05-10 19:50:10 -04:00
Roy Hooper	2f7c0ec8e4	Minor fixes to _pixelbuf.PixelBuf docs	2020-05-10 16:22:01 -04:00
warriorofwire	4086600b61	vectorio: switch per-shape transform to Display Rather than maintain a transform per-shape, we'll just use whatever settings are on the Display. Currently only transpose is done.	2020-05-09 22:15:51 -07:00
warriorofwire	206d0e598a	Add vectorio: for drawing shapes vectorio builds on m4 express feather Concrete shapes are composed into a VectorShape which is put into a displayio Group for display. VectorShape provides transpose and x/y positioning for shape implementations. Included Shapes: * Circle - A radius; Circle is positioned at its axis in the VectorShape. - You can freely modify the radius to grow and shrink the circle in-place. * Polygon - An ordered list of points. - Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last point and the first point. - You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape x and y properties will position the rectangle relative to its top center point * Rectangle A width and a height.	2020-05-09 15:38:22 -07:00
DavePutz	e7fc806034	Throw a NotImplementedError for time functions on boards without long ints Fix for Issue #2812. Instead of reporting a missing attribute for functions such as time.time() and time.mktime(); platforms that do not have long integer support will raise a NotImplementedError	2020-05-08 16:33:26 -05:00
dherrada	09530e5dc3	Did os, _pixelbuf, _pew	2020-05-08 16:03:39 -04:00
Kattni Rembor	a83d1d7b4b	Update wheel to colorwheel and fix RGB order.	2020-05-08 14:44:41 -04:00
Kattni Rembor	37e5ff7757	Update colorwheel from GRB to RGB.	2020-05-08 13:25:52 -04:00
dherrada	d750096bef	Did neopixel, network, nvm	2020-05-07 18:40:46 -04:00
dherrada	e31e9eeaa1	Did math, microcontroller, and multiterminal	2020-05-07 15:59:52 -04:00
dherrada	4f33a20d17	Added gamepad, gamepadshift, and i2cslave	2020-05-07 15:10:44 -04:00
dherrada	a3d5adb43c	Did _eve, fontio, framebufferio, and frequencyio	2020-05-07 11:56:46 -04:00
dherrada	2ebe3035df	Did board, digitalio, displayio	2020-05-07 10:54:09 -04:00
Daniel Pollard	84c806a4be	updated descriptions and build variable	2020-05-07 12:42:46 +10:00
spkuehl	af55af216a	Fix type in RTC documentation.	2020-05-06 14:11:11 -05:00
Sean Cross	b168784fa0	aesio: add basic AES encryption and decryption This adds initial support for an AES module named aesio. This implementation supports only a subset of AES modes, namely ECB, CBC, and CTR modes. Example usage: ``` >>> import aesio >>> >>> key = b'Sixteen byte key' >>> cipher = aesio.AES(key, aesio.MODE_ECB) >>> output = bytearray(16) >>> cipher.encrypt_into(b'Circuit Python!!', output) >>> output bytearray(b'E\x14\x85\x18\x9a\x9c\r\x95>\xa7kV\xa2`\x8b\n') >>> ``` This key is 16-bytes, so it uses AES128. If your key is 24- or 32- bytes long, it will switch to AES192 or AES256 respectively. This has been tested with many of the official NIST test vectors, such as those used in `pycryptodome` at `39626a5b01/lib/Crypto/SelfTest/Cipher/test_vectors/AES` CTR has not been tested as NIST does not provide test vectors for it. Signed-off-by: Sean Cross <sean@xobs.io>	2020-05-06 17:40:06 +08:00
Daniel Pollard	8961dd9fe7	changed build variables as per advice	2020-05-06 09:05:14 +10:00
Daniel Pollard	bfa5cd9c13	refactor countio based on feedback	2020-05-05 15:23:38 +10:00
Dan Halbert	e1366d78b1	trivial change to force rebuild	2020-05-04 23:05:47 -04:00
Dan Halbert	b7836aeac6	address review comments	2020-05-04 19:51:08 -04:00
Dan Halbert	bae7a5e433	make translate again	2020-05-04 17:26:59 -04:00
Dan Halbert	d6c6f9f4f0	add PacketBuffer .incoming_ and .outgoing_packet_length	2020-05-04 15:59:45 -04:00
dherrada	0e465e63b9	Did audiopwmio, bitbangio, and _bleio	2020-05-01 18:23:27 -04:00
Scott Shawcroft	242063e1d0	Merge pull request #2838 from spkuehl/UART_sharedbinding_fix Fix #2814 Corrected UART output.	2020-05-01 11:05:24 -07:00
spkuehl	a3a2dd0f70	Corrected UART output.	2020-04-30 19:14:51 -05:00
dherrada	d65e851044	Did audioio, audiomixer, audiomp3	2020-04-30 13:06:09 -04:00
Dan Halbert	46298ddcb4	PacketBuffer doc fixes	2020-04-30 00:36:01 -04:00
Dan Halbert	f3078511a6	further cleanup and bug fixing	2020-04-29 23:18:08 -04:00
Dan Halbert	180f5c6a94	Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes	2020-04-29 22:11:22 -04:00
Dan Halbert	3d62f87e29	back to '.packet_size' for compatiblity	2020-04-29 22:10:56 -04:00
Dan Halbert	84cee1ab8d	rename and improve PacketBuffer packet length property	2020-04-29 17:49:31 -04:00
dherrada	7ff9b9bc80	Did first 3	2020-04-29 17:36:28 -04:00
dherrada	a2a32fea1a	Added newlines after every ellipsis	2020-04-29 15:55:06 -04:00
dherrada	093461e816	Fixed indentation	2020-04-29 15:45:19 -04:00
dherrada	deccdcc1d6	Did the same for the rest of busio	2020-04-29 15:20:05 -04:00
dherrada	93d1e53c66	Hopefully fixed whitespace issues	2020-04-29 14:19:04 -04:00
dherrada	c7b721f4f1	Fixed some more whitespace	2020-04-28 19:22:03 -04:00
dherrada	aacca61598	Fixed whitespace on audiocore	2020-04-28 18:56:19 -04:00
dherrada	c3897d0add	Fixed whitespace in analogio	2020-04-28 18:43:40 -04:00
dherrada	724dcda3ec	Fixed whitespace in busio	2020-04-28 18:39:58 -04:00
Scott Shawcroft	755d404edf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-27 16:45:10 -07:00
dherrada	829da5c127	Added inline pyi to audiomp3	2020-04-27 17:29:50 -04:00
dherrada	8330471068	Added inline pyi to audiomixer	2020-04-27 17:20:40 -04:00
dherrada	1363e6e724	Added inline pyi to audiocore	2020-04-27 17:02:48 -04:00
dherrada	088b5b1785	Added inline pyi to audiocore	2020-04-27 16:49:12 -04:00
dherrada	e96235d0cf	Added inline pyi to audiobusio	2020-04-27 16:35:03 -04:00

... 15 16 17 18 19 ...

2498 Commits