s/Circuit Python/CircuitPython/g

Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00 · 2021-05-06 16:22:35 +03:00 · 908d83d1f2
commit 908d83d1f2
parent 03a4f85556
19 changed files with 19 additions and 19 deletions
--- a/ports/atmel-samd/asf4_conf/samd21/hpl_gclk_config.h
+++ b/ports/atmel-samd/asf4_conf/samd21/hpl_gclk_config.h
@ -1,4 +1,4 @@
-// Circuit Python SAMD21 clock tree:
+// CircuitPython SAMD21 clock tree:
 // DFLL48M (with USBCRM on to sync with external USB ref) -> GCLK0, GCLK1
 //   GCLK0 (48MHz) -> peripherals
 //   GLCK1 (48MHz divided by 150 = 320Khz) -> DAC peripheral (DAC requires 350KHz or lower)
--- a/ports/atmel-samd/asf4_conf/samd51/hpl_gclk_config.h
+++ b/ports/atmel-samd/asf4_conf/samd51/hpl_gclk_config.h
@ -1,4 +1,4 @@
-// Circuit Python SAMD51 clock tree:
+// CircuitPython SAMD51 clock tree:
 // DFLL48M (with USBCRM on to sync with external USB ref) -> GCLK1, GCLK5, GCLK6
 //   GCLK1 (48MHz) -> 48 MHz peripherals
 //   GCLK5 (48 MHz divided down to 2 MHz) -> DPLL0
--- a/ports/atmel-samd/asf4_conf/same51/hpl_gclk_config.h
+++ b/ports/atmel-samd/asf4_conf/same51/hpl_gclk_config.h
@ -1,4 +1,4 @@
-// Circuit Python SAMD51 clock tree:
+// CircuitPython SAMD51 clock tree:
 // DFLL48M (with USBCRM on to sync with external USB ref) -> GCLK1, GCLK5, GCLK6
 //   GCLK1 (48MHz) -> 48 MHz peripherals
 //   GCLK5 (48 MHz divided down to 2 MHz) -> DPLL0
--- a/ports/atmel-samd/asf4_conf/same54/hpl_gclk_config.h
+++ b/ports/atmel-samd/asf4_conf/same54/hpl_gclk_config.h
@ -1,4 +1,4 @@
-// Circuit Python SAMD51 clock tree:
+// CircuitPython SAMD51 clock tree:
 // DFLL48M (with USBCRM on to sync with external USB ref) -> GCLK1, GCLK5, GCLK6
 //   GCLK1 (48MHz) -> 48 MHz peripherals
 //   GCLK5 (48 MHz divided down to 2 MHz) -> DPLL0
--- a/ports/nrf/boards/common.template.ld
+++ b/ports/nrf/boards/common.template.ld
@ -136,7 +136,7 @@ SECTIONS
        . = ALIGN(4);
    } >APP_RAM

-    /* Remove exception unwinding information, since Circuit Python
+    /* Remove exception unwinding information, since CircuitPython
       does not support this GCC feature. */
    /DISCARD/ :
    {
--- a/ports/nrf/common-hal/rtc/RTC.c
+++ b/ports/nrf/common-hal/rtc/RTC.c
@ -42,7 +42,7 @@ __attribute__((section(".uninitialized"))) static uint32_t rtc_offset[3];
 // the system crashes or reboots, these values will remain undisturbed and the
 // RTC offset will remain valid.
 //
-// If Circuit Python is updated or these symbols shift around, the prefix and
+// If CircuitPython is updated or these symbols shift around, the prefix and
 // suffix will no longer match, and the time will no longer be valid.
 #define RTC_OFFSET_CHECK_PREFIX 0x25ea7e2a
 #define RTC_OFFSET_CHECK_SUFFIX 0x2b80b69e
--- a/ports/nrf/supervisor/port.c
+++ b/ports/nrf/supervisor/port.c
@ -282,7 +282,7 @@ void reset_cpu(void) {
 }

 // The uninitialized data section is placed directly after BSS, under the theory
-// that Circuit Python has a lot more .data and .bss than the bootloader.  As a
+// that CircuitPython has a lot more .data and .bss than the bootloader.  As a
 // result, this section is less likely to be tampered with by the bootloader.
 extern uint32_t _euninitialized;

--- a/shared-bindings/_pixelbuf/PixelBuf.c
+++ b/shared-bindings/_pixelbuf/PixelBuf.c
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-bindings/_pixelbuf/PixelBuf.h
+++ b/shared-bindings/_pixelbuf/PixelBuf.h
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-bindings/_pixelbuf/init.c
+++ b/shared-bindings/_pixelbuf/init.c
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-bindings/_pixelbuf/init.h
+++ b/shared-bindings/_pixelbuf/init.h
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-bindings/aesio/aes.c
+++ b/shared-bindings/aesio/aes.c
@ -28,7 +28,7 @@
 //|              from binascii import hexlify
 //|
 //|              key = b'Sixteen byte key'
-//|              inp = b'Circuit Python!!' # Note: 16-bytes long
+//|              inp = b'CircuitPython!!!' # Note: 16-bytes long
 //|              outp = bytearray(len(inp))
 //|              cipher = aesio.AES(key, aesio.mode.MODE_ECB)
 //|              cipher.encrypt_into(inp, outp)
--- a/shared-bindings/bitops/init.c
+++ b/shared-bindings/bitops/init.c
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-bindings/bitops/init.h
+++ b/shared-bindings/bitops/init.h
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-module/_pixelbuf/PixelBuf.c
+++ b/shared-module/_pixelbuf/PixelBuf.c
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-module/_pixelbuf/PixelBuf.h
+++ b/shared-module/_pixelbuf/PixelBuf.h
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-module/bitops/init.c
+++ b/shared-module/bitops/init.c
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/shared-module/bitops/init.h
+++ b/shared-module/bitops/init.h
@ -1,5 +1,5 @@
 /*
- * This file is part of the Circuit Python project, https://github.com/adafruit/circuitpython
+ * This file is part of the CircuitPython project, https://github.com/adafruit/circuitpython
 *
 * The MIT License (MIT)
 *
--- a/tools/cpboard.py
+++ b/tools/cpboard.py
@ -630,7 +630,7 @@ def print_error_exit(args, e):
 def main():
    import argparse

-    cmd_parser = argparse.ArgumentParser(description="Circuit Python Board Tool")
+    cmd_parser = argparse.ArgumentParser(description="CircuitPython Board Tool")
    cmd_parser.add_argument("board", help="build_name, vid:pid or /dev/tty")
    cmd_parser.add_argument("-f", "--firmware", help="upload UF2 firmware file")
    cmd_parser.add_argument("-c", "--command", help="program passed in as string")