circuitpython

Author	SHA1	Message	Date
Jeff Epler	ba2db853a4	Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory Update mini sam m4 memory	2020-08-20 19:05:39 -05:00
Benjamin Shockley	135626a038	Update mpconfigboard.mk Added support for second type of memory chip.	2020-08-20 13:50:52 -05:00
Brent Rubell	b1a8fb83fa	Merge pull request #3251 from jerryneedell/jerryn_rfm9x RFM9x -- freeze library into build	2020-08-17 17:11:35 -04:00
Dan Halbert	16ff7b167c	bdmicro_vina_m0: inline limit 60 -> 50 The ja translation was not fitting.	2020-08-17 10:05:25 -04:00
Dan Halbert	a28d0f6c80	Merge pull request #3273 from jepler/ja-firmware-size Squeeze firmwares to fit the new ja translation	2020-08-13 12:19:28 -04:00
Jeff Epler	239c8ff87f	metro_m0_express: put back audiobusio this now fits locally (though it's very close to capacity); let's see what the CI says. ``` make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja ... 253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB). ```	2020-08-12 19:11:33 -05:00
Jeff Epler	aa0b4f7045	cpx_display: Put back AUDIOBUSIO, take away ROTARYIO AUDIOBUSIO is needed for the on-board mic using PDMIn	2020-08-12 16:17:48 -05:00
Jeff Epler	ea8e9b8cef	metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO Dan notes that this is more frequently the solution we've chosen	2020-08-12 16:17:13 -05:00
Jeff Epler	299894025a	stringcar_m0_express: make ja translation fit	2020-08-12 13:47:10 -05:00
Jeff Epler	f08ee0db20	itsybitsy_m0_express: make ja translation fit again	2020-08-12 13:44:00 -05:00
Jeff Epler	7bd42244c9	snekboard: make ja translation fit	2020-08-12 13:34:36 -05:00
Jeff Epler	45f6bc1f3e	serpente: make ja translation fit	2020-08-12 13:32:08 -05:00
Jeff Epler	36bfbaae69	feather_radiofruit_zigbee: make ja translation fit	2020-08-12 13:28:30 -05:00
Jeff Epler	813dcd1b73	trinket_m0_haxpress: make ja translation fit	2020-08-12 12:44:17 -05:00
Jeff Epler	88f222f1a1	metro_m0_express: make ja translation fit	2020-08-12 12:38:17 -05:00
Jeff Epler	ba91023fff	itsybitsy_m0_express: make ja translation fit	2020-08-12 12:35:29 -05:00
Jeff Epler	6b9f7c9047	hallowing_m0_express: make ja translation fit	2020-08-12 12:29:30 -05:00
Jeff Epler	58afda342d	feather_m0_supersized: make ja translation fit	2020-08-12 11:53:34 -05:00
Jeff Epler	27c2eb1869	feather_m0_express: make ja translation fit	2020-08-12 11:51:56 -05:00
Jeff Epler	8865e4ca97	circuitplayground_express_displayio: make ja translation fit	2020-08-12 11:46:52 -05:00
Jeff Epler	f3748fe20d	circuitbrains_basic_m0: Use optimization flags to let ja translation fit	2020-08-12 11:46:31 -05:00
bleeptrack	49407b6c06	trailing spaces fix	2020-08-12 13:42:45 +02:00
bleeptrack	e34fac6645	Whitespace and Newline fix	2020-08-11 23:59:32 +02:00
bleeptrack	228d9b5a12	Fixing indentation	2020-08-11 22:18:15 +02:00
bleeptrack	22ae1dbac8	Removing unnecessary pin ignored	2020-08-11 22:17:17 +02:00
bleeptrack	00676ff5a9	PicoPlanet	2020-08-11 21:49:52 +02:00
Jerry Needell	f7961b96a9	update comment	2020-08-06 10:05:18 -04:00
Jerry Needell	c42ffb8f3d	remove usb_hid	2020-08-06 05:44:26 -04:00
Jerry Needell	432f43a472	freeze rfm9x and BusDevice, remove many built-in modules	2020-08-05 11:37:57 -04:00
Dan Halbert	0a60aee3e4	wip: compiles	2020-08-02 11:36:38 -04:00
Dan Halbert	1771858f4a	add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes	2020-08-01 13:20:46 -04:00
Dan Halbert	4b71831d8b	SUPEROPT_VM = 0 for de_DE	2020-08-01 12:36:20 -04:00
Jeff Epler	27c6ffb9a2	atmel-samd: gemma, trinket: Make space for de_DE translation	2020-07-30 11:29:47 -05:00
Jeff Epler	d69f081c04	Merge remote-tracking branch 'origin/main' into blm_badge	2020-07-30 07:24:48 -05:00
Joey Castillo	8acec2ca35	add descriptive pin names	2020-07-29 13:49:08 -04:00
Joey Castillo	ea9bc9b4b6	set screen orientation to portrait	2020-07-29 13:46:10 -04:00
Dan Halbert	ca9eae8eea	Merge pull request #3209 from pewpew-game/fluff-m0-pins fluff_m0: add pin aliases	2020-07-28 15:15:15 -04:00
Scott Shawcroft	b30d89131b	Merge pull request #3215 from ansonhe97/main Added display QSTR to Wio Terminal	2020-07-28 11:53:17 -07:00
Dan Halbert	aa97ea2501	Merge remote-tracking branch 'adafruit/main' into blm_badge	2020-07-28 14:15:02 -04:00
Dan Halbert	e5e132a364	add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT	2020-07-28 11:49:54 -04:00
ansonhe97	e15bcebb6e	Added display QSTR to Wio Terminal	2020-07-28 17:31:17 +08:00
Jerry Needell	945736e9bb	add adjustments for crickit and displayio variants of CPX	2020-07-27 22:13:04 -04:00
Jerry Needell	2bdd62220e	adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice	2020-07-27 21:50:36 -04:00
Scott Shawcroft	f4f2018952	Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2 ndgGarage ndbit6 v2	2020-07-27 15:51:23 -07:00
Radomir Dopieralski	b2c4b0bcfa	fluff_m0: don't exclude portb pins explicitly	2020-07-26 17:26:32 +02:00
Radomir Dopieralski	b1b253c012	fluff_m0: add pin aliases Add aliases for SDI, SDO and EN, so that pin names match the text on the PCB to avoid confusion. Also disable all pins from port B, because that package of SAMD21 doesn't have port B.	2020-07-26 13:39:42 +02:00
Dan Halbert	7ab5c520e6	Merge pull request #3190 from DavePutz/opt-test Changes to allow different compiler optimizations per board	2020-07-25 17:03:10 -04:00
Dan Halbert	b7e6bf959e	Merge pull request #3205 from burtyb/commander-2 Add GamePad to Commander board	2020-07-25 16:57:58 -04:00
Chris Burton	c4a5297ee2	Add GamePad to Commander	2020-07-25 17:53:27 +00:00
ikigaisense	6696915801	fix-ndbit6-for-ndbit6_v2	2020-07-25 10:07:33 -06:00
root	739981b34e	update for pewpew	2020-07-24 17:27:25 -05:00
root	b9cdf195e2	board mk file changes	2020-07-24 10:00:42 -05:00
root	c937fa1760	fix formatting	2020-07-23 19:29:57 -05:00
root	778e8bfda9	Changes to optimization option	2020-07-23 19:27:02 -05:00
ikigaisense	703fb9d4a1	update-ndGarage_ndbit6_v2	2020-07-23 16:08:30 -06:00
root	d83a4ac72d	Changes to add compiler optimization option	2020-07-22 12:44:41 -05:00
DavePutz	39e01c3938	Merge pull request #14 from adafruit/main update from main	2020-07-22 11:30:49 -05:00
Scott Shawcroft	8ff2846bb2	Disable countio on circuitbrains basic	2020-07-21 16:21:49 -07:00
Scott Shawcroft	cb7df2e1ed	Merge pull request #3160 from tannewt/enable_pystack Enable PYSTACK to keep function state out of the heap	2020-07-21 13:38:52 -07:00
Scott Shawcroft	5e3a853db4	Turn off GC opt on uchip board	2020-07-21 12:51:59 -07:00
Scott Shawcroft	678faff464	Be more aggressive with uChip build	2020-07-21 11:02:23 -07:00
root	49decf90c9	Add option for higher optimization levels	2020-07-21 10:11:08 -05:00
Scott Shawcroft	0c6935e336	Merge branch 'main' into disable_network	2020-07-20 16:28:22 -07:00
Scott Shawcroft	12edb57aac	Merge pull request #3166 from theacodes/bhb-adc Add _bhb user module for Big Honking Button	2020-07-20 16:24:36 -07:00
Thea Flowers	7ba89f5330	Add _bhb user module for Big Honking Button BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.	2020-07-18 22:45:08 -07:00
Radomir Dopieralski	11ef43b071	pewpew_m4: Disable USB_HID back German translation fails to build, so I have to disabled USB_HID after all.	2020-07-18 20:09:30 +02:00
Radomir Dopieralski	8d692f33a8	pewpew_m4: Enable analogio and usb_hid The newest version for the Stage library for PewPewM4 no longer contains embedded graphics, which frees enough space in flash to enabled back AnalogIO and also add USB_HID. There is still ~192 bytes left free. If new additions to CircuitPython make it grow further, we can disable USB_HID again.	2020-07-18 19:30:40 +02:00
Scott Shawcroft	610e0171aa	Disable existing native networking. We're moving towards a co-processor model and a Wiznet library is already available. New native APIs will replace these for chips with networking like the ESP32S2 but they won't be these.	2020-07-17 17:43:02 -07:00
Jeff Epler	6912d31560	uchip: reclaim some flash space	2020-07-17 14:32:05 -05:00
Dan Halbert	3fcd999130	Merge pull request #3130 from pewpew-game/brownout-level SAMD: make the brownout detection level configurable per board	2020-07-13 16:26:11 -04:00
Radomir Dopieralski	742f9cfdb0	Fluff M0: additional pins on version 1.3 of the board	2020-07-10 20:40:58 +02:00
Radomir Dopieralski	e0733d153e	SAMD: configurable brownout, separate the variables	2020-07-09 12:17:07 +02:00
Radomir Dopieralski	83a27edd20	SAMD: make the brownout detection level configurable per board Not all boards have external flash or other components that make them require 2.7V -- sometimes we can get considerably longer battery life by decreasing this requirement. In particular, pewpew10 and pewpew_m4 are powered directly from battery, with no LDO, and should work fine down to 1.6V.	2020-07-08 19:59:53 +02:00
Scott Shawcroft	846f01b2c8	Merge pull request #3113 from ansonhe97/main ADD: Added Wio Terminal's functional pins and LCD driver to board init	2020-07-06 14:50:47 -07:00
ndgarage	e514782cc6	update-with-new-usb-PID	2020-07-04 10:39:21 -06:00
ansonhe97	36ef3476de	Fix depreciate terminology	2020-07-04 11:21:58 +08:00
ansonhe97	2ecb46f192	Fix CI	2020-07-03 13:42:27 +08:00
ansonhe97	2a92cf8d8b	ADD: Added LCD driver to board init	2020-07-03 12:44:20 +08:00
ansonhe97	49aacc8596	ADD: Fixed wrong SPI pins and added more functional pins	2020-07-03 12:43:21 +08:00
Scott Shawcroft	4d7b9cde33	Merge pull request #3109 from pewpew-game/fluff_m0 Fluff M0: additional pins on version 1.3 of the board	2020-07-02 15:43:32 -07:00
Radomir Dopieralski	fce35c3481	Fluff M0: additional pins on version 1.3 of the board	2020-07-02 22:57:58 +02:00
ndgarage	0537f4e775	restore-ndgarage_ndbit6-to-original	2020-07-01 14:12:52 -06:00
ndgarage	c759c9a2aa	add-ndgarage_ndbit6_v2-update	2020-07-01 13:58:07 -06:00
svgops	b80dbb4b2c	add-ndgarage_ndbit6_v2	2020-07-01 12:06:59 -06:00
ansonhe97	d4e28dd233	ADD: added more special pins on Wio Terminal	2020-07-01 17:06:26 +08:00
Scott Shawcroft	74ad5e80ce	Merge pull request #3089 from ansonhe97/main Add: added Seeed's Wio Terminal Board Support	2020-06-30 10:58:24 -07:00
ansonhe97	4613f80d7a	Fix end of line	2020-06-29 17:41:48 +08:00
ansonhe97	0dd17f4418	Add: Added Seeed Wio Terminal board support	2020-06-29 16:22:41 +08:00
Jeff Epler	f496c0b58d	atmel-samd: Add SDIO SD card interface	2020-06-26 11:50:42 -05:00
Dan Halbert	759929c24a	hci early wip; refactor supervisor bluetooth.c for nrf: tested	2020-06-25 20:57:17 -04:00
Jeff Epler	1d2cc0b968	I2CPeripheral: Rename class and its module This is an incompatible change.	2020-06-25 11:44:19 -05:00
Jeff Epler	076a96ccc6	Merge pull request #3046 from jepler/same51 Add basic SAM E54 support and SAM E54 Xplained board	2020-06-25 06:55:27 -05:00
Jeff Epler	87835c77e8	Merge pull request #3038 from jepler/compute-usb-devices Compute USB_DEVICES instead of requiring it to be specified	2020-06-24 13:31:56 -05:00
Jeff Epler	f232aef786	supervisor.mk: Compute USB_DEVICES; remove from boards and ports Since Actions passed on the previous commit, where this computed value was checked against the specified value (if any), this is no net change, except that we no longer need to specify it for particular boards or ports.	2020-06-23 12:59:01 -05:00
Jeff Epler	38659b566c	atmel-samd: Finish disabling USB MIDI and/or HID on certain boards	2020-06-23 10:56:27 -05:00
Jeff Epler	d5074220a8	atmel-samd: Add SAM E54 Xplained board Few peripherals are actually tested. However, USB, I2C and GPIO seem to work. Most pins are silkscreened with the "PX00" style, so the board module only includes the small number that are screened differently. The default SPI, I2C, and UART are the ones on the EXT2 header. This is arbitrary, but the I2C on this connector is shared with the on-board I2C devices and the PCC header, making it the most versatile.	2020-06-23 10:41:48 -05:00
Scott Shawcroft	0b99baccb8	Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board PID request for a new board configuration	2020-06-22 15:09:42 -07:00
Jeff Epler	d43449a6d6	sparkfun samd51 thing plus: Fix board.I2C() This had the SDA and SCL pins transposed, so nothing worked.	2020-06-22 10:45:27 -05:00
Florin Trutiu	b316549590	Added the new assigned VID/PID pair	2020-06-19 19:26:29 +03:00
Florin Trutiu	178be2e3c9	loc_ber_m4_base_board	2020-06-19 18:56:20 +03:00
Diego Elio Pettenò	dd5d7c86d2	Fix up end of file and trailing whitespace. This can be enforced by pre-commit, but correct it separately to make it easier to review.	2020-06-03 10:56:35 +01:00
Scott Shawcroft	665fe7a839	Merge pull request #2945 from pewpew-game/fluff_m0 Add support for Fluff M0	2020-05-26 13:18:55 -07:00
Radomir Dopieralski	4974c933b1	Fix swapped SCK and MISO in Fluff M0	2020-05-26 03:29:05 +02:00
Jeff Epler	5cffd7e88d	trinket_m0_haxpress: disable RTC to make build fit with upcoming translations	2020-05-23 20:48:38 -05:00
Jeff Epler	eb85304d04	escornabot: disable RTC to make build fit with upcoming translations	2020-05-23 20:48:38 -05:00
Jeff Epler	03866c0598	meowmeow: disable modules to make build fit with upcoming translations	2020-05-23 20:41:25 -05:00
Jeff Epler	2ed40075a5	pyruler: disable RTC to make build fit with upcoming translations	2020-05-23 20:36:33 -05:00
Radomir Dopieralski	4c01ddcbab	Add support for Fluff M0	2020-05-22 18:51:12 +02:00
jason	4f54514be4	Initial version	2020-05-20 21:11:06 -05:00
Scott Shawcroft	acf4b1bede	Remove reverse methods from per-board defs	2020-05-19 11:43:57 -07:00
Scott Shawcroft	9eb85a5feb	shrink Xinabox CS11 by turning off unused pins	2020-05-19 10:55:02 -07:00
Scott Shawcroft	cf690bd390	Merge remote-tracking branch 'adafruit/master' into esp32s2	2020-05-18 16:46:41 -07:00
Dan Halbert	e175a64036	disable rotaryio in CPX crickit	2020-05-15 20:35:12 -04:00
Scott Shawcroft	8edb8e87c8	Turn reverse methods off for trinket haxpress	2020-05-15 17:22:22 -07:00
Scott Shawcroft	86f865afe0	Turn reverse methods off for cpx_crickit	2020-05-15 16:42:22 -07:00
Dan Halbert	a3ca9401b4	Shrink crickit build	2020-05-15 18:29:37 -04:00
Scott Shawcroft	80129c5a21	Disable countio on trinket haxpress	2020-05-12 18:55:49 -07:00
Scott Shawcroft	277e8d528b	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 18:22:57 -07:00
warriorofwire	5a80f5e606	nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size	2020-05-12 15:23:00 -07:00
Scott Shawcroft	d274074f01	Merge remote-tracking branch 'adafruit/master' into vectorio	2020-05-12 12:29:05 -07:00
Scott Shawcroft	bc40034a08	Merge branch 'master' into Optical-Encoder-Module	2020-05-12 12:12:51 -07:00
Daniel Pollard	62bdfb74e3	removed lib from catwan_usbstick - updated transalations overflowed	2020-05-12 16:40:23 +10:00
Daniel Pollard	5e5461e77e	removed countio from catwan_usbstick build	2020-05-12 16:32:35 +10:00
Daniel Pollard	ee2cb703c8	merged master	2020-05-12 14:41:28 +10:00
warriorofwire	206d0e598a	Add vectorio: for drawing shapes vectorio builds on m4 express feather Concrete shapes are composed into a VectorShape which is put into a displayio Group for display. VectorShape provides transpose and x/y positioning for shape implementations. Included Shapes: * Circle - A radius; Circle is positioned at its axis in the VectorShape. - You can freely modify the radius to grow and shrink the circle in-place. * Polygon - An ordered list of points. - Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last point and the first point. - You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape x and y properties will position the rectangle relative to its top center point * Rectangle A width and a height.	2020-05-09 15:38:22 -07:00
Dan Halbert	8d00d99ca0	Shrink hallowing_m0_express to fit ko build	2020-05-08 22:51:21 -04:00
Daniel Pollard	7f1be814c8	changed build variables as per advice	2020-05-06 09:04:15 +10:00
Daniel Pollard	f63ee9fb9b	excluded countio from other smaller boards	2020-05-05 16:15:57 +10:00
Daniel Pollard	d5c24b99b8	hallowing m0 - exclude countio	2020-05-05 16:04:28 +10:00
Dan Halbert	602eabe668	Squeeze hallowing_m0_express build slightly ko build is a little too big.	2020-05-04 17:18:53 -04:00
Dan Halbert	c377d4bea7	Merge branch 'master' into non-standard-nvm	2020-05-04 16:08:45 -04:00
Scott Shawcroft	3799c34564	Disable bitbangio on CPX Crickit so we have room for lower_power. Enable pixelbuf in its place because we'll need it soon.	2020-04-29 13:57:09 -07:00
Max Holliday	6c4decd4e2	decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE	2020-04-28 11:51:07 -07:00
Scott Shawcroft	755d404edf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-27 16:45:10 -07:00
Max Holliday	86943ca8a1	Merge remote-tracking branch 'adafruit/master'	2020-04-27 13:51:51 -07:00
Lucian Copeland	c6c77726e7	Merge remote-tracking branch 'upstream/master' into stm32-docfix	2020-04-23 13:39:48 -04:00
Lucian Copeland	8791ca6af3	implement requested changes	2020-04-23 13:33:41 -04:00
Scott Shawcroft	bebf27e733	Merge remote-tracking branch 'adafruit/master' into lower_power This isn't perfect and needs a bit more testing.	2020-04-20 18:25:13 -07:00
Scott Shawcroft	a4d86b96fd	Merge pull request #2777 from pewpew-game/master Fix RGB/BGR colors in Stage	2020-04-20 15:25:29 -07:00
Jeff Epler	5fcc6d6286	RGBMatrix: finish renaming from Protomatter This gets all the purely internal references. Some uses of protomatter/Protomatter/PROTOMATTER remain, as they are references to symbols in the Protomatter C library itself.	2020-04-17 18:44:07 -05:00
Radomir Dopieralski	43022d8294	Add copyrights to pewpew m4 and ugame board.c	2020-04-17 09:50:11 +02:00
Radomir Dopieralski	f39ca6052e	Fix RGB/BGR colors in Stage This makes the colors used by the stage library compatible with those used by the displayio library.	2020-04-15 23:41:38 +02:00
Scott Shawcroft	b580b34cbf	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-04-14 17:14:44 -07:00
Jeff Epler	759fdffda5	Update ports/atmel-samd/boards/pyportal_titano/board.c Co-Authored-By: Scott Shawcroft <scott@tannewt.org>	2020-04-14 18:24:58 -05:00
Jeff Epler	09dc46a984	Add Protomatter and FramebufferDisplay	2020-04-14 18:24:54 -05:00
Jeff Epler	a51d4f7a45	pycubed: add trailing newline to file POSIX specifies that text files end in a trailing newline	2020-04-14 18:24:54 -05:00
Sabas	cac4fb0318	Merge branch 'master' into nfc_copy	2020-04-09 17:05:11 -05:00
sabas1080	49771b4d7f	Update to v1.3	2020-04-09 14:27:51 -05:00
Max Holliday	826837186c	adds standard (non-queued) SPI support to QSPI for external flash	2020-04-07 18:17:25 -07:00
Scott Shawcroft	8fe512c7e9	Merge remote-tracking branch 'adafruit/master' into lower_power	2020-03-31 15:13:58 -07:00
Brian Dean	7cfa8e1a68	board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.	2020-03-29 18:59:00 -04:00
Jeff Epler	54e8c63b4f	Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity Add polarity and phase to FourWire.	2020-03-28 07:28:37 -05:00
Scott Shawcroft	798118b74f	Update board.c's to remove remaining tick.h	2020-03-27 14:52:35 -07:00
Scott Shawcroft	b043384949	Update built in display init	2020-03-27 14:35:29 -07:00
Brian Dean	7fa38e8725	Update board name to bdmicro_vina_m0 to eliminate hyphens.	2020-03-27 13:37:59 -04:00
Brian Dean	14a1e5756e	Merge branch 'master' of https://github.com/adafruit/circuitpython	2020-03-26 20:28:54 -04:00
Brian Dean	2ae9edcbff	Add new board BDMICRO 'Vina M0'. ports/atmel-samd/boards/bdmicro_vina_m0/board.c ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk ports/atmel-samd/boards/bdmicro_vina_m0/board.c This board includes the newly added MX25L51245G 64MB SPI flash chip for the CircuitPython file system. Also included is the PCF2129T/2,518 high accuracy, battery backed, RTC. Also includes an independent USB HOST connector in addition to USB DEVICE making it easy to connect USB peripherals. Designed mainly as a general purpose module to piggy back onto application-specific boards, it can also run low power standalone in harsh environments for data logging and other control applications using an appropriate enclosure. Has been extensively tested with CircuitPython and works well.	2020-03-26 20:15:54 -04:00
Scott Shawcroft	aec3b2419b	Merge pull request #2733 from oshwabadge2020/change_backlight Add backlight polarity flag to Display	2020-03-26 14:00:47 -07:00
Thea Flowers	ff67571e9a	Add GD25Q64C as a flash chip for Sol	2020-03-26 12:33:27 -07:00
siddacious	9e0c00dfd4	adding a backlight polarity flag to Display	2020-03-25 22:51:20 -07:00
Chris Burton	5e559be9b5	Remove Adafruit_CircuitPython_CircuitPlayground	2020-03-24 21:10:34 +00:00
Chris Burton	39a19d54c2	Add support for Commander	2020-03-22 16:23:56 +00:00
Scott Shawcroft	5dc3a8960b	Merge pull request #2719 from theacodes/add-honking-button Add board support for Winterbloom Big Honking Button	2020-03-18 17:37:59 -07:00
Thea Flowers	e027aaf433	Remove some build options, fix order of boards in build.yml	2020-03-18 16:49:10 -07:00
Thea Flowers	7332adfa21	Add board support for Winterbloom Big Honking Button	2020-03-18 16:29:44 -07:00
Scott Shawcroft	4603c6ddd7	Merge pull request #2711 from jepler/update-ulab update ulab	2020-03-17 15:33:08 -07:00
Jeff Epler	d6342af980	ulab: rename enable macro so it appears in the support matrix	2020-03-17 09:33:03 -05:00
Szymon Klause	c9aa50817c	add UARTLogger2 board support for CircuitPython	2020-03-13 21:39:17 +01:00
Dan Halbert	210c3274e5	Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup	2020-03-05 17:47:01 -05:00
Thea Flowers	409a4a9490	Disable the HID USB descriptor for Sol It's not used and ends up being confusing for folks.	2020-03-04 23:22:46 -08:00
Dan Halbert	b6206406de	new pin validation routines; don't use mp_const_none if NULL will do	2020-02-28 23:43:04 -05:00
Jeff Epler	fa3b9eba92	ulab: Incorporate it	2020-02-27 11:03:03 -06:00
jepler	f20255813f	samd51 thing plus: new port testing performed: * successfully store and retrieve a 500kB file on the flash * square wave output on each pin appears on o'scope * board.SPI(), board.SERIAL(), board.I2C() all construct	2020-02-25 11:52:23 -06:00
Dan Halbert	dcc8abf74e	Merge pull request #2638 from fgallaire/master Arduino Nano 33 IoT support	2020-02-22 00:12:06 -05:00
Florent Gallaire	96db16a7a2	Last NINA pins	2020-02-22 04:30:18 +01:00
Florent Gallaire	39ec5d0e51	Add NINA pins	2020-02-21 01:34:52 +01:00
Florent Gallaire	fba0b302ff	Add Arduino Nano 33 IoT support	2020-02-19 08:56:06 +01:00
Dan Halbert	1f148242db	Merge pull request #2605 from maholli/master New board: PyCubed + updates to SAM32 board	2020-02-18 22:01:41 -05:00
Max Holliday	2b79d8ffe9	adding PWM to board.c for external WDT	2020-02-18 14:16:54 -08:00
Max Holliday	93760042fa	no current need for NVM	2020-02-16 11:43:19 -08:00
Scott Shawcroft	e97b0cfc61	Merge pull request #2581 from jamesbowman/master First draft of eveL, the low-level module of the Gameduino bindings	2020-02-13 11:21:32 -08:00
Max Holliday	b91c4e66cb	adding Adafruit_CircuitPython_Register to frozen + updating SAM32	2020-02-08 16:09:47 -08:00
Max Holliday	84fa0c187e	adding new board - PyCubed open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples	2020-02-08 15:33:25 -08:00
Limor "Ladyada" Fried	71672fd244	Merge pull request #2599 from ladyada/master update rotation so 0 is the default, for much faster ondiskbitmaps	2020-02-07 12:59:30 -05:00
Lady Ada	789e311b63	update rotation so 0 is the default, for much faster ondiskbitmaps	2020-02-06 16:28:02 -05:00
neubauek	d93d491a61	Cleaned up CircuitBrains Basic and Deluxe board definitions	2020-02-06 14:47:22 -06:00
James Bowman	acef93a253	Rename eveL to _eve, EVEL to _EVE	2020-02-05 18:17:58 -08:00
neubauek	f3188669e4	Added CircuitBrains Basic and Deluxe Boards	2020-02-05 14:52:47 -06:00
Dan Halbert	a4ebd2f7c1	allow tuple or list for Palette color	2020-02-03 22:09:53 -05:00
James Bowman	7fd30e7d20	First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. [adafruit/circuitpython#2578]	2020-02-03 16:46:14 -08:00
Dan Halbert	be4e681d07	fix UICR check; do not use NULL for no MISO	2020-01-31 18:57:41 -05:00
Dan Halbert	3b95d7c16a	add gamepad to specialty cpx builds; update frozen libs	2020-01-30 21:00:47 -05:00
Dan Halbert	6f13979c9b	pygamer and pybadge boards were not resetting neopixels	2020-01-24 09:32:28 -05:00
Dan Halbert	68f9aee992	reset NeoPixels on CPB on soft reload	2020-01-23 20:16:31 -05:00
Limor "Ladyada" Fried	fe70072d68	Merge branch 'master' into ndbit6	2020-01-23 12:32:19 -05:00
ndgarage	4675783545	change-name-to-ndgarage_ndbit6	2020-01-23 09:55:17 -07:00
Sabas	41a85b71fc	init nfc copy	2020-01-22 20:30:33 -06:00
Dan Halbert	4923caf85e	Increase CPX stack size by 256	2020-01-21 18:53:55 -05:00
Chris Osterwood	97420994e8	Merge remote-tracking branch 'origin/master' into capablerobot-usbhub	2020-01-20 13:11:57 -05:00
Dan Halbert	f496b6cdc8	Merge pull request #2520 from joeycastillo/openbook-squashed CircuitPython support for the Open Book	2020-01-15 17:21:19 -05:00
dalegrover	d6e657b593	Initial commit.	2020-01-14 16:51:27 -05:00
Joey Castillo	eb481c9247	add support for the Open Book	2020-01-14 16:34:46 -05:00
scs217	50e718be99	second revision to line breaks for visibility per dhalbert	2020-01-13 22:13:39 -05:00
scs217	18957786f2	inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert	2020-01-13 22:00:42 -05:00
scs217	c735289ddf	Added Dxx names to analog pins on Feather M4 Express pins.c file	2020-01-13 21:19:17 -05:00
Scott Shawcroft	866ac13405	Merge pull request #2450 from Marius-450/marius-display-limit-2 CIRCUITPY_DISPLAY_LIMIT = 2 for monster m4sk	2020-01-07 12:08:59 -08:00
Radomir Dopieralski	59ded1131f	Take display offsets for PewPew M4 from the bootloader config The PewPew M4 devices come with different displays, which require different offsets. Since the information about offsets is saved in the bootloader, we can take it from there.	2020-01-06 14:24:30 +01:00
Marius-450	3ad3d49959	changes only for monster m4sk	2020-01-04 12:32:49 -05:00
Dan Halbert	32b82032a1	Merge pull request #2423 from pewpew-game/pewpew-m4-update Update the PewPew M4 board and circuitpython-stage	2020-01-01 13:59:02 -05:00
Scott Shawcroft	0223589e6c	Fix default UART too	2019-12-30 11:34:51 -08:00
Scott Shawcroft	e1d026f815	Update pins.c	2019-12-30 11:33:04 -08:00
Radomir Dopieralski	b06057395b	Update PewPew M4 PewPew M4 now has the pew.py added to its frozen libraries. Some features needed to be disabled to make room for that.	2019-12-23 18:37:36 +01:00
Scott Shawcroft	f60b6481e0	Turn off `gamepad` on cpx crickit	2019-12-20 12:14:27 -08:00
Scott Shawcroft	b859e2b710	Remove `re` from CPX Displayio build to make space.	2019-12-20 11:43:56 -08:00
Jeff Epler	d31a387ace	circuitplayground_express_displayio: reduce inlining to make .ko translation fit	2019-12-19 16:11:29 -06:00
ndgarage	16688180c6	add-ndbit6	2019-12-19 07:17:43 -07:00
Dan Halbert	81581b345c	Increase CPX stack size slightly	2019-12-16 17:25:22 -05:00
KalbeAbbas	89ed64157d	Merge branch 'master' into master	2019-12-16 13:25:44 +05:00
KalbeAbbas	87dc9bee8b	Update mpconfigboard.mk	2019-12-16 12:25:51 +05:00
KalbeAbbas	6f6d6c01ab	Update mpconfigboard.mk	2019-12-16 12:18:16 +05:00
Dan Halbert	d9ca4c9a60	fix build failures	2019-12-10 22:39:44 -05:00
Dan Halbert	c6221c5956	Remove no-longer-used nrf and atmel-samd .ld files	2019-12-10 21:22:17 -05:00
Dan Halbert	68ae47907c	merge from upstream	2019-12-10 21:04:46 -05:00
Dan Halbert	013c840862	working on all ports	2019-12-10 20:27:30 -05:00
Jeff Epler	a08d9e6d8e	audiocore: Add MP3File using Adafruit_MP3 library	2019-12-10 14:03:06 -06:00
Dan Halbert	40434d6919	wip	2019-12-05 22:45:53 -05:00
Jeff Epler	002f5c0f1c	samd: trinket_m0: make board fit again	2019-12-02 08:25:48 -06:00
Jeff Epler	899202aca7	Merge branch 'master' into gcc9	2019-12-02 07:27:03 -06:00
Jeff Epler	d843156a5e	samd: Consolidate small build optimization flags .. inline-unit-growth was the same across all boards, and the highest max-inline-insns-auto parameter was shared across 2 of 5 boards, so it's worth a little work to follow the DRY principle	2019-11-29 10:51:16 -06:00
Dan Halbert	dd6dfeb30a	Squeeze pyruler zh_Latn_pinyin	2019-11-27 14:47:35 -05:00
Dan Halbert	e560b419f8	Merge pull request #2325 from sarfata/sarfata/add-shirtty-master Add shIRtty board	2019-11-26 15:23:56 -05:00
Dan Halbert	97d90c6039	Merge pull request #2329 from theacodes/set-winterbloom-sol-usb-name Set USB_INTERFACE_NAME for winterbloom_sol	2019-11-26 15:17:14 -05:00
Thea Flowers	e77046d49b	Set USB_INTERFACE_NAME for winterbloom_sol	2019-11-26 10:59:12 -08:00
Thomas Sarlandie	2647ea0754	fix: disable touchio to save some space	2019-11-26 19:26:18 +01:00
Scott Shawcroft	58ad38a88e	Remove DotStar from pIRkey M0 for now to free up space Once we use PixelBuf, the library will be much smaller.	2019-11-26 09:31:44 -08:00
Jeff Epler	82f55dc046	atmel-samd: reduce inlining on constrained boards again pewpew10, pirkey_m0, and uchip all fit now. However, pirkey_m0 now has just 76 bytes flash available.	2019-11-26 08:50:55 -06:00
Jeff Epler	3ed6de7baf	atmel-samd: reduce inlining on pyruler again By tweaking the optimizer flags further, this build also fits	2019-11-26 08:50:55 -06:00
Jeff Epler	2e4a6b94e7	atmel-samd: get most constrained m0 builds to work again By tweaking the optimizer flags, we can get back a few hundred bytes and allow these builds to work with the gcc9 compiler.	2019-11-26 08:50:45 -06:00
Thomas Sarlandie	11dc572bce	feature: our own PID - thanks @ladyada	2019-11-25 21:56:42 +01:00
Thomas Sarlandie	fc71ed9789	add shirtty board - hackaday supercon 2019 addon	2019-11-25 17:44:41 +01:00
Dan Halbert	13375d16f1	change mpconfigport.mk files so they can be overriden by mpconfigboard.mk	2019-11-22 15:44:51 -05:00
Dan Halbert	e18d3e0f76	Merge branch 'master' into m4-network-ps2io	2019-11-22 15:02:52 -05:00
Dan Halbert	1a62a9cb17	remove network from kicksat_sprite	2019-11-22 14:02:44 -05:00
Dan Halbert	2e9aa38700	turn off network in pewpew_m4	2019-11-22 13:49:33 -05:00
Dan Halbert	1d411d2874	Merge remote-tracking branch 'adafruit/master' into testing-fixes	2019-11-22 11:55:34 -05:00
Dan Halbert	228a619af5	enable network, wiznet5k, and ps2io by default on M4	2019-11-22 10:59:27 -05:00
wallarug	fce7b89087	removed Robo HAT MM1 M0 board.	2019-11-20 21:34:24 +11:00
ndgarage	b3d7467719	add-ndbit6	2019-11-19 14:52:09 -07:00
Cedar Grove Maker Studios	e7df288a34	add USB interface description ... to "StringCarM0Ex"	2019-11-16 16:40:40 -08:00
KalbeAbbas	8134ceec83	Update pins.c	2019-11-14 23:16:55 +05:00
KalbeAbbas	799770926b	Update pins.c	2019-11-14 18:51:01 +05:00
KalbeAbbas	949f87fd25	Update pins.c	2019-11-14 18:50:26 +05:00
KalbeAbbas	3db7f2798f	updated	2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen	d745c1023e	Support for XinaBox CC03 and CS11 CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface. https://xinabox.cc/products/cc03 https://xinabox.cc/products/cs11	2019-11-12 12:48:31 +02:00
Thea Flowers	c7195c4bc5	Allow boards to enable the `micropython.native` decorator Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables the `micropython.native` decorator.	2019-11-05 14:27:53 -08:00
Thea Flowers	73989dbcaf	Add board configuration for Winterbloom Sol	2019-11-04 23:11:42 -08:00
brentru	2f04c5891f	flip it around	2019-10-31 14:11:50 -04:00
brentru	ab3da3071c	flip MADCTL BGR bit to reflect RGB colors	2019-10-31 10:11:47 -04:00
ladyada	d2b613134d	we should use native rotation, and tweak madctl (not done yet)	2019-10-29 22:53:44 -04:00
ladyada	1e869d1334	switch to 8-bit mode - tested on hardware!	2019-10-29 21:14:45 -04:00
Dan Halbert	1505da784f	wip	2019-10-28 18:15:02 -04:00
ProductDev	4cd5571203	Adds builds for sparkfun_qwiic_micro with and without flash	2019-10-23 15:05:46 -06:00
Dan Halbert	7b79ac3739	Parameterize linker script	2019-10-20 23:50:12 -04:00
wallarug	8f2e5990db	Changed to follow standard that Pad 0 is always TX	2019-10-17 18:02:05 +11:00
Cedar Grove Maker Studios	bd608e0807	remove placeholder	2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios	b04a218bbc	initial load of stringcar m0 express defs	2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios	44ebc4c95d	establish stringcar m0 express definitions	2019-10-14 11:55:22 -07:00
Chris Osterwood	137a4f8a5d	Added new flash SKU for production hardware	2019-10-07 14:50:39 -04:00
Scott Shawcroft	cdc116291b	Merge pull request #2177 from wallarug/walla/robohatmm1-production Robo HAT MM1 - Fixes after testing	2019-09-26 10:44:55 -07:00
arturo182	21f8c3e40a	serpente: Update PID and enable as many modules as we can fit	2019-09-26 17:22:18 +02:00
wallarug	3c99a23adb	fix spi	2019-09-26 21:47:36 +10:00
wallarug	533a5bc7a3	fixed SPI on M4	2019-09-26 21:43:52 +10:00
wallarug	5cd10b3ba0	updated robohatmm1_m0	2019-09-26 20:02:09 +10:00
wallarug	39265fccf3	included a version number	2019-09-26 19:22:51 +10:00
wallarug	db9495b04b	updated board name	2019-09-26 19:21:53 +10:00
wallarug	08b0f80879	updated board name	2019-09-26 19:21:24 +10:00
wallarug	b7e8a031d0	remove frozen busio library	2019-09-26 19:19:54 +10:00
wallarug	ff13b6f682	updated pins.c	2019-09-26 19:18:50 +10:00
wallarug	70860e1352	robohatmm1 removed uart and put in correct order	2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams	9a74bf929b	Added TFT pins to HalloWing M4 for code compatibility	2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams	341428b4da	Added SPEAKER pin to HalloWing M4 for code compatibility	2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams	8dfb2237d9	Added TOUCH pins to HalloWing M4 for code compatibility	2019-09-19 10:40:13 -07:00
Scott Shawcroft	fc90c942f5	Add custom CPX build for display support	2019-09-17 10:40:07 -07:00
Scott Shawcroft	aa9b57fc81	Merge pull request #2154 from arturo182/master Add support for Serpente boards	2019-09-16 09:20:17 -07:00
arturo182	e1679acaec	Set as small build regardless of language	2019-09-16 11:51:46 +02:00
Kattni Rembor	c94310411b	Update board def, enable touchio	2019-09-14 21:19:35 -04:00
arturo182	28bb901d1e	Add support for Serpente boards	2019-09-14 16:06:28 +02:00
Radomir Dopieralski	d50ed3b6e7	Add support for PewPew M4 board	2019-09-05 10:50:33 +02:00
Scott Shawcroft	9730d4aa1c	Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x	2019-08-29 14:38:16 -07:00
Scott Shawcroft	0aa5507c4c	add additional pin aliases	2019-08-29 13:41:28 -07:00
Scott Shawcroft	84839de56f	Hallowing M4	2019-08-29 10:34:46 -07:00
Scott Shawcroft	0876d5c4ad	Disable bitbangio on Itsy M0 Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files	2019-08-27 15:21:47 -07:00
Scott Shawcroft	7324b70a7c	Rework based on Dan's review	2019-08-23 15:27:21 -07:00
Scott Shawcroft	b992ca80e7	Rejigger builds to fit under 50 minute limit	2019-08-22 20:29:58 -07:00
Scott Shawcroft	72e7ffa324	More cleanup	2019-08-22 16:16:09 -07:00
Scott Shawcroft	fd8050b369	Turn off features to make room for ePaper	2019-08-22 15:19:45 -07:00
Scott Shawcroft	9993a99906	Add initial Monster M4SK build	2019-08-22 14:24:32 -07:00
Scott Shawcroft	3a98de1236	Add reset() to display busses to detect whether it works	2019-08-22 14:23:33 -07:00
Scott Shawcroft	36a23e0fe3	Rework refresh API and factor common display stuff out NOT TESTED! Just compiles Fixes #1691	2019-08-22 14:23:27 -07:00
Dan Halbert	7cc15e56c8	make translate	2019-08-22 15:20:23 -04:00
Dave Astels	d547d59cba	Merge remote-tracking branch 'adafruit/master' into displayio_fill_area	2019-08-21 15:02:51 -04:00
Dave Astels	dcf36db263	Make room	2019-08-21 14:46:10 -04:00
Dan Halbert	e2a4c76a37	make nrf touchio be generic: now available for SAMD51 too	2019-08-18 08:44:10 -04:00
brentru	5a8846d33c	remove cruft from prv board	2019-08-08 15:12:01 -04:00
brentru	f87f48ab88	adding pyportal titano board definition	2019-08-08 14:56:28 -04:00
Chris Osterwood	d5658860aa	Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.	2019-08-08 14:39:50 -04:00
Chris Osterwood	fb2712410e	Merge branch 'master' into capablerobot-usbhub	2019-08-08 14:14:23 -04:00
brentru	1d4700cb6c	add pindefs for tft and tft control	2019-08-07 18:29:20 -04:00
brentru	8f6eac98f3	add defs for pyportal titano	2019-08-07 17:10:31 -04:00
Scott Shawcroft	eee759455a	Merge pull request #2018 from keith-packard/snekboard Add board support for keithp.com SnekBoard	2019-07-31 16:38:51 -07:00
Scott Shawcroft	366fdcce18	Merge pull request #2011 from tannewt/ssd1322 Add knobs for SSD1322 and two displayio fixes.	2019-07-30 14:15:37 -07:00
Scott Shawcroft	9dd56b1566	Merge branch 'master' into snekboard	2019-07-30 14:12:08 -07:00
wallarug	ecfffac3a8	Delete samd51x19-bootloader-external-flash-crystalless.ld	2019-07-30 19:48:35 +10:00
wallarug	ff6ae1aefb	Update mpconfigboard.mk to use standard linker file	2019-07-30 19:13:33 +10:00
Keith Packard	c6e4ddc88a	boards/snekboard: Delete SPI object reference Snekboard does not expose any pins for SPI to the user, so delete the SPI object reference as that won't work. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:45:52 -07:00
Keith Packard	9a37c8a4b3	boards/snekboard: Add pin aliases for UART and I2C Allow users to use TX/RX and SDA/SCL names. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:45:06 -07:00
Keith Packard	4387ecfdfb	Update snekboard PID to official value Snekboard has been assigned the following PIDs: PID 0x004D # bootloader PID 0x804D # arduino PID 0x804E # circuitpython Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:15:18 -07:00
Keith Packard	326df70ac2	Fix snekboard names Manufacturer -- keithp.com Product -- snekboard Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:15:18 -07:00
Keith Packard	56f710f64f	Add board support for keithp.com SnekBoard This is another SAMDG2118A design with built-in 9V motor controllers that are designed to be used with Lego PowerFunctions devices. Signed-off-by: Keith Packard <keithp@keithp.com>	2019-07-29 13:14:37 -07:00
wallarug	dc1eb73ee7	Merge branch 'master' into wallarug-robohat	2019-07-29 21:53:49 +10:00
wallarug	8974c7e843	Added BUTTON to pins.c	2019-07-29 16:37:53 +10:00
wallarug	9e0bea405d	Added BUTTON to pins.c	2019-07-29 16:37:21 +10:00
wallarug	4d30efdc2a	Updated pins.c for GROVE.	2019-07-29 16:29:48 +10:00
wallarug	8838e25cb2	Update pins.c	2019-07-29 16:28:35 +10:00
sommersoft	8eab946c5b	Merge pull request #2003 from C47D/travis_check_new_boards Add check to travis to make sure new boards are built, fix #1886	2019-07-28 22:41:59 -05:00
wallarug	0f30070d58	updated naming schema to match other boards	2019-07-27 17:44:42 +10:00
wallarug	b06fa48735	updated a few files	2019-07-27 16:59:07 +10:00
wallarug	9c57f52d1e	updated pins.c for robohat	2019-07-27 16:56:03 +10:00
wallarug	24e84adc6d	further robohat cleanups	2019-07-27 16:38:47 +10:00
wallarug	e2b83e2dd9	minor changes robohat d21	2019-07-27 16:36:13 +10:00
wallarug	36008de2ed	added custom ld file for samd51 no crystal, ext flash	2019-07-27 16:29:30 +10:00
wallarug	eda3423e35	updated to v1.7 board (samd51)	2019-07-27 16:27:41 +10:00
Scott Shawcroft	c61c874a6d	Reduce feather_m0_supersized build size Make it match feather_m0_express	2019-07-26 00:31:41 -07:00
Scott Shawcroft	a87094e01f	Turn off GC opt to save space on Trinket Haxpress	2019-07-25 22:56:46 -07:00
Scott Shawcroft	4e7de436b4	Update constructors of boards with displays	2019-07-25 22:48:11 -07:00
Scott Shawcroft	1d1b8703b6	Review feedback including NO_BRIGHTNESS_COMMAND macro	2019-07-19 16:11:13 -07:00
Scott Shawcroft	b9b9ef227f	Turn off bitbanging on Hallowing to save code space.	2019-07-19 16:10:33 -07:00
Scott Shawcroft	6797ec6ed3	Add support for grayscale displays that are < 8 bit depth. This also improves Palette so it stores the original RGB888 colors. Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly useful for the SSD1306. Fixes #1828. Fixes #1956	2019-07-19 16:06:11 -07:00
Kattni Rembor	582acdaa0a	Requested changes.	2019-07-09 16:12:24 -04:00
Kattni Rembor	d905958db1	Adding PyRuler to CircuitPython.	2019-07-09 16:02:39 -04:00
jandjstudios	46b7575550	Initial commit to support boards in the datum series.	2019-07-06 13:41:03 -07:00
Chris Osterwood	97e7fea517	Change pin names to be more descriptive	2019-07-04 13:23:57 -04:00
Chris Osterwood	539502c891	Remove pin reservations. Prevents used from inside of CircuitPython code	2019-07-04 13:22:36 -04:00
Radomir Dopieralski	e45eac5016	Switch the terminal font for ugame10 I designed this really tiny, minimalist font for use on very small displays. On uGame it lets one see the whole text that CircuitPython prints on boot. The characters are 4x6 pixels each, and they are optimized for legibility (large x-height, right angles, blocky shapes). It might make sense to also use that font in other boards.	2019-07-01 23:05:07 +02:00
Scott Shawcroft	0cce7fcaa3	Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402	2019-06-27 14:06:26 -07:00
Scott Shawcroft	fe507db45f	Shrink pIRkey build down. Rollback HID to save string space and remove board mapping for default buses that don't exist.	2019-06-26 16:49:23 -07:00
Scott Shawcroft	7ad229ec27	Merge pull request #1958 from tannewt/pygamer_advanced Add PyGamer Advance and fix Joystick pins	2019-06-19 12:32:36 -07:00
Scott Shawcroft	5e5252ced0	Merge pull request #1955 from pewpew-game/pygamer-stage Add support for PyGamer to Stage library	2019-06-18 18:23:08 -07:00
Scott Shawcroft	352bf7eaf5	Add PyGamer Advance and fix Joystick pins	2019-06-18 12:22:20 -07:00
Radomir Dopieralski	5803245009	Add support for PyGamer to Stage library	2019-06-18 19:05:51 +02:00
Scott Shawcroft	2dddccb99e	Update board inits for new api.	2019-06-17 18:03:30 -07:00
brentru	ea2c068e11	COLMOD is 1 param, remove CASET/RASET in CircuitPython	2019-06-17 11:20:25 -04:00
brentru	207dc885a6	removed incorrect gamma code, looks better now	2019-06-14 16:34:30 -04:00
brentru	4092294e7c	tft working init. sequence, still undersaturated	2019-06-14 16:17:05 -04:00
brentru	0bc74172a2	Add pybadge airlift, sans-tft	2019-06-14 14:46:19 -04:00
Scott Shawcroft	0b1f605a9b	Turn off gc opt for more M0 boards	2019-06-12 13:20:21 -07:00
Scott Shawcroft	eb21fc3e31	Add partial display update support. Different operations to the display tree have different costs. Be aware of these costs when optimizing your code. * Changing tiles indices in a TileGrid will update an area covering them all. * Changing a palette will refresh every object that references it. * Moving a TileGrid will update both where it was and where it moved to. * Adding something to a Group will refresh each individual area it covers. * Removing things from a Group will refresh one area that covers all previous locations. (Not separate areas like add.) * Setting a new top level Group will refresh the entire display. Only TileGrid moves are optimized for overlap. All other overlaps cause sending of duplicate pixels. This also adds flip_x, flip_y and transpose_xy to TileGrid. They change the direction of the pixels but not the location. Fixes #1169. Fixes #1705. Fixes #1923.	2019-06-12 11:32:39 -07:00
Dan Halbert	ba1b36a800	Uncomment vm.c SUPEROPT (debugging typo); trim a few builds	2019-06-12 13:09:09 -04:00
Dan Halbert	1bb4fccc3b	Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files	2019-06-12 11:08:22 -04:00
Dan Halbert	0b3f29780a	shrink a bunch of builds to fit	2019-06-11 18:46:06 -04:00
Dan Halbert	4fc189b60c	Merge latest 4.0.x fixes into master	2019-06-11 16:16:29 -04:00
shazz	9c49af0597	Added pin for SD CS	2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter	1da8d4b4da	Add PS/2 support -- ps2io module	2019-06-04 18:05:46 -03:00
Dan Halbert	4e85c1ef91	Implement forced clean builds for boards so designated. Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds. Fixes #1910.	2019-05-24 15:32:24 -04:00
Dan Halbert	e84f3b1c6a	make crickit cpx pinyin build fit	2019-05-23 21:22:50 -04:00
Dan Halbert	0199d9810b	Make pinyin fit on cpx	2019-05-21 15:18:56 -04:00
Dan Halbert	008bbc944c	correct USB PIDs for several boards	2019-05-16 10:54:15 -04:00
Scott Shawcroft	f3ab820fc2	Merge pull request #1884 from CapableRobot/capablerobot-usbhub Added board definition for Capable Robot Programmable USB Hub	2019-05-14 13:42:51 -07:00
Chris Osterwood	a0497553fc	Fix to prevent critical pins from being reset when MCU restarts or enters REPL	2019-05-14 15:23:33 -04:00
Chris Osterwood	420dbafa9d	Added board definition for Capable Robot Programmable USB Hub	2019-05-14 13:28:24 -04:00
sabas1080	9f082ba5cb	Fix pin lost	2019-05-13 10:18:53 -05:00
Scott Shawcroft	36e2faf8d2	Merge pull request #1873 from ElectronicCats/escornabot_makech Add Escornabot Makech of Electronic Cats	2019-05-10 12:39:58 -07:00
sabas1080	d174ce8821	Update pins define	2019-05-10 13:34:02 -05:00
Scott Shawcroft	67007282c9	Tighten down inlining on the pIRkey	2019-05-10 11:19:27 -07:00
sabas1080	27ea1df710	Init escornabot	2019-05-08 15:48:17 -05:00
sabas1080	08a170388d	fix VID and PID inverted	2019-05-08 10:09:49 -05:00
ladyada	ed8e6e8f45	re-add i2s (its J not G!)	2019-04-29 20:30:53 -04:00
ladyada	fa3a52bc1e	similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)	2019-04-29 20:29:48 -04:00
wallarug	aa3c28787c	removed problem libraries from frozen build.	2019-04-28 00:09:13 +10:00
wallarug	b4a70daf17	updated lots	2019-04-27 22:35:12 +10:00
wallarug	cd4aaa13a3	added robohatmm1 board defs.	2019-04-25 21:13:41 +10:00
ladyada	a5697470e1	fix up pybadge for final release board (swap backlite and reset)	2019-04-23 16:43:20 -04:00
Dan Halbert	0113e0970e	add Display.__init__() args for brightness and auto_brightness	2019-04-18 15:59:16 -04:00
Dan Halbert	6684a3c723	Merge pull request #1778 from pewpew-game/gamepad-shift Add GamePadShift for handling shift-register-based buttons	2019-04-17 10:22:24 -04:00
Scott Shawcroft	2fa1bf4351	Merge remote-tracking branch 'adafruit/master' into gamepadshift	2019-04-16 11:23:41 -07:00
Scott Shawcroft	f58446e937	Merge branch 'master' into master	2019-04-16 10:32:38 -07:00
ITACA Innovation S.R.L	2d303213ed	Add files via upload	2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L	4f5a7ffe46	Updates: VID&PID, pinout Changed VID & PID to new ones. Changed the layout accordingly to the prototype version.	2019-04-16 16:45:47 +02:00
Scott Shawcroft	c927e6b938	Split GamePadShift from GamePad to save space on most boards.	2019-04-15 15:40:06 -07:00
Scott Shawcroft	22889ca29a	Merge pull request #1790 from pewpew-game/pybadge-stage Enable _stage module and freeze stage library on the PyBadge	2019-04-15 14:25:50 -07:00
Radomir Dopieralski	ade6bd8185	Enable _stage module and freeze stage library on the PyBadge	2019-04-15 14:38:02 +02:00
siddacious	5135ee52d9	Changing to support for CP32-M4 wrover	2019-04-14 19:45:44 -07:00
Radomir Dopieralski	eeef5359f9	Merge branch 'master' into gamepad-shift	2019-04-13 11:54:25 +02:00
Dan Halbert	f8473f4a39	Merge pull request #1788 from tannewt/pinyin Add Chinese (Pinyin) and slim down boards so it fits	2019-04-12 20:36:59 -04:00
Scott Shawcroft	defc6dceb0	Slim down feather m0 express	2019-04-12 16:18:08 -07:00
Scott Shawcroft	796fc3f5ab	Update font location and shrink a bunch of builds	2019-04-12 15:25:48 -07:00
Scott Shawcroft	c064deaaf5	Merge pull request #1785 from pewpew-game/ugame-displayio Enable displayio for the ugame10 board	2019-04-12 13:26:51 -07:00
Scott Shawcroft	7161038d6b	Turn off `displayio` because it is a satellite	2019-04-12 11:54:32 -07:00
Radomir Dopieralski	0599286e32	Use never_reset in ugame10	2019-04-12 20:45:52 +02:00
Radomir Dopieralski	947662415c	Disable gamepad for feather_m0_express_crickit	2019-04-12 20:43:29 +02:00

... 6 7 8 9 10 ...

1057 Commits