36bfbaae69
feather_radiofruit_zigbee: make ja translation fit
2020-08-12 13:28:30 -05:00
58a1361d3e
Merge remote-tracking branch 'origin/main' into ja-firmware-size
2020-08-12 13:26:12 -05:00
813dcd1b73
trinket_m0_haxpress: make ja translation fit
2020-08-12 12:44:17 -05:00
88f222f1a1
metro_m0_express: make ja translation fit
2020-08-12 12:38:17 -05:00
ba91023fff
itsybitsy_m0_express: make ja translation fit
2020-08-12 12:35:29 -05:00
6b9f7c9047
hallowing_m0_express: make ja translation fit
2020-08-12 12:29:30 -05:00
58afda342d
feather_m0_supersized: make ja translation fit
2020-08-12 11:53:34 -05:00
27c2eb1869
feather_m0_express: make ja translation fit
2020-08-12 11:51:56 -05:00
8865e4ca97
circuitplayground_express_displayio: make ja translation fit
2020-08-12 11:46:52 -05:00
f3748fe20d
circuitbrains_basic_m0: Use optimization flags to let ja translation fit
2020-08-12 11:46:31 -05:00
f9d1d9d114
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 11:15:34 -05:00
454e616d13
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 10:46:56 -05:00
49407b6c06
trailing spaces fix
2020-08-12 13:42:45 +02:00
e34fac6645
Whitespace and Newline fix
2020-08-11 23:59:32 +02:00
228d9b5a12
Fixing indentation
2020-08-11 22:18:15 +02:00
22ae1dbac8
Removing unnecessary pin ignored
2020-08-11 22:17:17 +02:00
00676ff5a9
PicoPlanet
2020-08-11 21:49:52 +02:00
1cf3762392
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-10 12:54:12 -05:00
1d980d527e
Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x
2020-08-07 12:48:41 -04:00
f7961b96a9
update comment
2020-08-06 10:05:18 -04:00
c42ffb8f3d
remove usb_hid
2020-08-06 05:44:26 -04:00
432f43a472
freeze rfm9x and BusDevice, remove many built-in modules
2020-08-05 11:37:57 -04:00
c7b6e66426
Fixes for pulsein tick handling
2020-08-05 10:03:20 -05:00
93b373d617
"pop from empty %q"
...
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
ac95106b88
service discovery works; need to work on char and descriptor discovery
2020-08-04 18:24:37 -04:00
c849b781c0
Combine 'index out of range' messages
2020-08-04 14:45:45 -05:00
dddd25a776
Combine similar strings to reduce size of translations
...
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used. The net savings on trinket_m0 is
just 32 bytes.
It also means that the translation will include the original English
text, and cannot be translated. These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
0e2d231445
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-03 21:01:53 -05:00
a995a5c58f
wip: partial discovery responses; compiles; not tested
2020-08-03 21:02:57 -04:00
d7eedc5e38
Merge pull request #20 from adafruit/main
...
Update from main
2020-08-03 13:14:01 -05:00
9203a77804
Turn off interrupts while in handler
2020-08-03 11:31:12 -05:00
0a60aee3e4
wip: compiles
2020-08-02 11:36:38 -04:00
12b81618a3
Changes for getting supervisor ticks
2020-08-01 13:27:02 -05:00
1771858f4a
add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes
2020-08-01 13:20:46 -04:00
4b71831d8b
SUPEROPT_VM = 0 for de_DE
2020-08-01 12:36:20 -04:00
27c6ffb9a2
atmel-samd: gemma, trinket: Make space for de_DE translation
2020-07-30 11:29:47 -05:00
d69f081c04
Merge remote-tracking branch 'origin/main' into blm_badge
2020-07-30 07:24:48 -05:00
af135a7560
atmel-samd: move samd-specific script
2020-07-30 07:18:02 -05:00
8acec2ca35
add descriptive pin names
2020-07-29 13:49:08 -04:00
ea9bc9b4b6
set screen orientation to portrait
2020-07-29 13:46:10 -04:00
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins
...
fluff_m0: add pin aliases
2020-07-28 15:15:15 -04:00
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals
...
Use samd peripherals fixed for gcc 10
2020-07-28 15:14:20 -04:00
b30d89131b
Merge pull request #3215 from ansonhe97/main
...
Added display QSTR to Wio Terminal
2020-07-28 11:53:17 -07:00
aa97ea2501
Merge remote-tracking branch 'adafruit/main' into blm_badge
2020-07-28 14:15:02 -04:00
92216d6417
Use samd peripherals fixed for gcc 10
2020-07-28 11:14:25 -07:00
e5e132a364
add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT
2020-07-28 11:49:54 -04:00
e15bcebb6e
Added display QSTR to Wio Terminal
2020-07-28 17:31:17 +08:00
945736e9bb
add adjustments for crickit and displayio variants of CPX
2020-07-27 22:13:04 -04:00
2bdd62220e
adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice
2020-07-27 21:50:36 -04:00
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2
...
ndgGarage ndbit6 v2
2020-07-27 15:51:23 -07:00
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations
...
More type hints
2020-07-27 14:26:54 -07:00
d356581651
Fix several type hints
2020-07-27 18:05:13 +09:00
b2c4b0bcfa
fluff_m0: don't exclude portb pins explicitly
2020-07-26 17:26:32 +02:00
b1b253c012
fluff_m0: add pin aliases
...
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.
Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
2020-07-26 13:39:42 +02:00
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test
...
Changes to allow different compiler optimizations per board
2020-07-25 17:03:10 -04:00
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2
...
Add GamePad to Commander board
2020-07-25 16:57:58 -04:00
c4a5297ee2
Add GamePad to Commander
2020-07-25 17:53:27 +00:00
6696915801
fix-ndbit6-for-ndbit6_v2
2020-07-25 10:07:33 -06:00
c4817968ee
Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test
2020-07-24 23:28:41 -05:00
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
739981b34e
update for pewpew
2020-07-24 17:27:25 -05:00
a14101cd13
Use current mpconfigboard.mk with optimization change
2020-07-24 14:09:09 -05:00
b9cdf195e2
board mk file changes
2020-07-24 10:00:42 -05:00
54a342a7f5
Add and correct some type hints
2020-07-24 18:20:03 +09:00
c937fa1760
fix formatting
2020-07-23 19:29:57 -05:00
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
703fb9d4a1
update-ndGarage_ndbit6_v2
2020-07-23 16:08:30 -06:00
2bd6d05663
Add externs. GCC10 complains about duplicate defines
2020-07-22 16:26:46 -07:00
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
39e01c3938
Merge pull request #14 from adafruit/main
...
update from main
2020-07-22 11:30:49 -05:00
8ff2846bb2
Disable countio on circuitbrains basic
2020-07-21 16:21:49 -07:00
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack
...
Enable PYSTACK to keep function state out of the heap
2020-07-21 13:38:52 -07:00
5e3a853db4
Turn off GC opt on uchip board
2020-07-21 12:51:59 -07:00
678faff464
Be more aggressive with uChip build
2020-07-21 11:02:23 -07:00
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
0c6935e336
Merge branch 'main' into disable_network
2020-07-20 16:28:22 -07:00
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc
...
Add _bhb user module for Big Honking Button
2020-07-20 16:24:36 -07:00
7ba89f5330
Add _bhb user module for Big Honking Button
...
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
2020-07-18 22:45:08 -07:00
11ef43b071
pewpew_m4: Disable USB_HID back
...
German translation fails to build, so I have to disabled USB_HID after
all.
2020-07-18 20:09:30 +02:00
8d692f33a8
pewpew_m4: Enable analogio and usb_hid
...
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.
If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
2020-07-18 19:30:40 +02:00
610e0171aa
Disable existing native networking.
...
We're moving towards a co-processor model and a Wiznet library is
already available.
New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
2020-07-17 17:43:02 -07:00
6912d31560
uchip: reclaim some flash space
2020-07-17 14:32:05 -05:00
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
6160d11c5a
supervisor: factor out, Handle USB via background callback
2020-07-15 11:49:44 -05:00
742aa740f6
samd: audio: Move to background callback
...
Testing performed: Played half of the Bartlebeats album :) :)
2020-07-15 09:26:47 -05:00
51c888d4be
Merge pull request #3003 from Flameeyes/master
...
License tagging according to REUSE specifications.
2020-07-13 16:28:49 -07:00
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level
...
SAMD: make the brownout detection level configurable per board
2020-07-13 16:26:11 -04:00
f6869c69c5
wip: advertising; not tested
2020-07-12 19:45:23 -04:00
742f9cfdb0
Fluff M0: additional pins on version 1.3 of the board
2020-07-10 20:40:58 +02:00
e0733d153e
SAMD: configurable brownout, separate the variables
2020-07-09 12:17:07 +02:00
83a27edd20
SAMD: make the brownout detection level configurable per board
...
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.
In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
2020-07-08 19:59:53 +02:00
965a4961ce
Merge pull request #3120 from DavePutz/issue#3049
...
Issue#3049 -PulseIn not working in CP5.4
2020-07-07 08:59:22 -07:00
0932b64ae7
Correct for SAMD51 build
2020-07-06 23:25:33 -05:00
1b3cb17abd
Corrected file for SAMD51 build
2020-07-06 21:47:11 -05:00
ab4a453006
Made requested changes
2020-07-06 21:40:38 -05:00
846f01b2c8
Merge pull request #3113 from ansonhe97/main
...
ADD: Added Wio Terminal's functional pins and LCD driver to board init
2020-07-06 14:50:47 -07:00
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
2f80460a2f
Fluff M0: additional pins on version 1.3 of the board
2020-07-06 19:15:41 +01:00
ac33c3fe2c
Implementation of continuous synchronization of RTC during pulsein
...
Flags and code to implement continuous synchronization of RTC during pulsein
2020-07-04 21:17:19 -05:00
94d90742dd
Implementation of RTC continuous synchronization during pulsein
...
Flags and code to implement RTC continuous synchronization during pulsein
2020-07-04 21:15:38 -05:00
e514782cc6
update-with-new-usb-PID
2020-07-04 10:39:21 -06:00
36ef3476de
Fix depreciate terminology
2020-07-04 11:21:58 +08:00
2ecb46f192
Fix CI
2020-07-03 13:42:27 +08:00
2a92cf8d8b
ADD: Added LCD driver to board init
2020-07-03 12:44:20 +08:00
49aacc8596
ADD: Fixed wrong SPI pins and added more functional pins
2020-07-03 12:43:21 +08:00
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0
...
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 15:43:32 -07:00
fce35c3481
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 22:57:58 +02:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
0537f4e775
restore-ndgarage_ndbit6-to-original
2020-07-01 14:12:52 -06:00
c759c9a2aa
add-ndgarage_ndbit6_v2-update
2020-07-01 13:58:07 -06:00
b80dbb4b2c
add-ndgarage_ndbit6_v2
2020-07-01 12:06:59 -06:00
d4e28dd233
ADD: added more special pins on Wio Terminal
2020-07-01 17:06:26 +08:00
11cb3e3b4b
hci skeleton done; not working yet
2020-06-30 23:19:40 -04:00
74ad5e80ce
Merge pull request #3089 from ansonhe97/main
...
Add: added Seeed's Wio Terminal Board Support
2020-06-30 10:58:24 -07:00
4613f80d7a
Fix end of line
2020-06-29 17:41:48 +08:00
0dd17f4418
Add: Added Seeed Wio Terminal board support
2020-06-29 16:22:41 +08:00
c5db97c50f
atmel-sam: sdio: disable debug prints by default
2020-06-26 13:16:16 -05:00
f496c0b58d
atmel-samd: Add SDIO SD card interface
2020-06-26 11:50:42 -05:00
d4b9458512
samd: sdio: Add needed files from atmel start
2020-06-26 11:50:41 -05:00
57fde2e07b
sdcardio: implement new library for SD card I/O
...
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
3e616ccead
update submodules
2020-06-26 12:21:57 -04:00
759929c24a
hci early wip; refactor supervisor bluetooth.c for nrf: tested
2020-06-25 20:57:17 -04:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
076a96ccc6
Merge pull request #3046 from jepler/same51
...
Add basic SAM E54 support and SAM E54 Xplained board
2020-06-25 06:55:27 -05:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices
...
Compute USB_DEVICES instead of requiring it to be specified
2020-06-24 13:31:56 -05:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
38659b566c
atmel-samd: Finish disabling USB MIDI and/or HID on certain boards
2020-06-23 10:56:27 -05:00
d5074220a8
atmel-samd: Add SAM E54 Xplained board
...
Few peripherals are actually tested. However, USB, I2C and GPIO seem to work.
Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.
The default SPI, I2C, and UART are the ones on the EXT2 header. This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00
da733c01da
atmel-samd: Add support for SAM E54 family MCUs
...
This introduces the new macro SAM_D5X_E5X. This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
2020-06-23 10:41:48 -05:00
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board
...
PID request for a new board configuration
2020-06-22 15:09:42 -07:00
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay
...
delay 1ms on SAMD51 when reading processor voltage
2020-06-22 14:29:43 -07:00
d43449a6d6
sparkfun samd51 thing plus: Fix board.I2C()
...
This had the SDA and SCL pins transposed, so nothing worked.
2020-06-22 10:45:27 -05:00
a770b5a919
never_reset_pin: Move pin validity check before first use of pin number
2020-06-22 10:45:27 -05:00
6638bc32c3
samd: Makefile: Regularize whitespace
2020-06-22 10:45:27 -05:00
a580f0f1c4
_pew: move to common-hal
...
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10). Move it.
There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
1687c8b1e3
delay 1ms on SAMD51 when reading processor voltage
2020-06-19 15:25:04 -04:00
b316549590
Added the new assigned VID/PID pair
2020-06-19 19:26:29 +03:00
178be2e3c9
loc_ber_m4_base_board
2020-06-19 18:56:20 +03:00
3c3cad5ae6
docs: Improve 5.0.x <-> main branch doc linkrot
...
This improves, but does not entirely fix, the broken links that result
from the autoapi change. It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
2020-06-14 11:12:35 -05:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio
...
Finish digitalio and pin use tracking for ESP32S2
2020-05-26 19:18:45 -04:00
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi
...
fix racing issue for SAMD when executing WFI
2020-05-26 14:54:24 -07:00
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894
...
Add an increment to tcc_refcount to allow deinit to work correctly
2020-05-26 14:39:59 -07:00
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0
...
Add support for Fluff M0
2020-05-26 13:18:55 -07:00
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
4974c933b1
Fix swapped SCK and MISO in Fluff M0
2020-05-26 03:29:05 +02:00
e79340601f
fix racing issue for SAMD when executing WFI
2020-05-25 20:51:02 +07:00
5cffd7e88d
trinket_m0_haxpress: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
eb85304d04
escornabot: disable RTC to make build fit with upcoming translations
2020-05-23 20:48:38 -05:00
03866c0598
meowmeow: disable modules to make build fit with upcoming translations
2020-05-23 20:41:25 -05:00
2ed40075a5
pyruler: disable RTC to make build fit with upcoming translations
2020-05-23 20:36:33 -05:00
4c01ddcbab
Add support for Fluff M0
2020-05-22 18:51:12 +02:00
2e05f628f0
Add an increment to tcc_refcount to allow deinits to work properly
2020-05-21 11:08:26 -05:00
3bb6a32a20
Merge branch 'master' into esp32s2_digitalio
2020-05-21 08:52:39 -07:00
4f54514be4
Initial version
2020-05-20 21:11:06 -05:00
ba724fffb4
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-20 10:48:27 -07:00
fd0420d432
Update digitalio api for other ports
2020-05-20 09:23:42 -07:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
acf4b1bede
Remove reverse methods from per-board defs
2020-05-19 11:43:57 -07:00
9eb85a5feb
shrink Xinabox CS11 by turning off unused pins
2020-05-19 10:55:02 -07:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
cf690bd390
Merge remote-tracking branch 'adafruit/master' into esp32s2
2020-05-18 16:46:41 -07:00
9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode
...
Add bytearray.decode() for CPython compatibility
2020-05-18 14:38:45 -07:00
e175a64036
disable rotaryio in CPX crickit
2020-05-15 20:35:12 -04:00
8edb8e87c8
Turn reverse methods off for trinket haxpress
2020-05-15 17:22:22 -07:00
86f865afe0
Turn reverse methods off for cpx_crickit
2020-05-15 16:42:22 -07:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
a3ca9401b4
Shrink crickit build
2020-05-15 18:29:37 -04:00
0d8bca92e2
Merge pull request #2810 from dherrada/master
...
Pyi integration
2020-05-15 10:31:05 -07:00
db4dbe0752
Merge pull request #2889 from jepler/gamepad-tick
...
Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick
2020-05-13 11:53:23 -07:00
adef45403b
samd: audio dma: enable/disable supervisor tick as needed
2020-05-13 10:29:36 -05:00
7546d47f77
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-13 08:23:55 -07:00
80129c5a21
Disable countio on trinket haxpress
2020-05-12 18:55:49 -07:00
cde6651721
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-12 18:23:59 -07:00
277e8d528b
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 18:22:57 -07:00
4e8de3c554
Swap sphinx to autoapi and the inline stubs
2020-05-12 17:28:24 -07:00
5a80f5e606
nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size
2020-05-12 15:23:00 -07:00
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio
2020-05-12 12:29:05 -07:00
bc40034a08
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 12:12:51 -07:00
f7303e6bd0
Merge pull request #2754 from maholli/non-standard-nvm
...
Add non-standard nvm to QSPI for external flash support
2020-05-12 11:56:33 -07:00
62bdfb74e3
removed lib from catwan_usbstick - updated transalations overflowed
2020-05-12 16:40:23 +10:00
5e5461e77e
removed countio from catwan_usbstick build
2020-05-12 16:32:35 +10:00
ee2cb703c8
merged master
2020-05-12 14:41:28 +10:00
55f78bfb70
Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol
...
ujson: work with mp stream protocol for fast & easy read
2020-05-11 15:40:27 -07:00
407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset()
...
Added an #if CIRCUITPY_RTC check for platforms supporting RTC
2020-05-11 12:03:44 -05:00
2ddfab315c
Added call to rtc_reset() in rtc_init()
...
Fix for issue #2872 . The rtc_time_source had not been initialized; causing a time.time() call to fail.
2020-05-11 11:31:18 -05:00
eb3d5fa453
ujson: do not eat trailing whitespace
...
Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers.
When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout.
Fixes:
- Waiting for a timeout after you have completed reading a correct and complete JSON off the input.
- Raising an OSError after reading a correct and complete JSON off the input.
- Eating more data than semantically owned off the input buffer.
- Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object.
Code you would write before:
```
line = board_busio_uart_port.read_line()
json_dict = json.loads(line)
```
or reaching for fixed buffers and swapping them around in Python.
Code that did not work before that does now:
```
json_dict = json.load(board_busio_uart_port)
```
- This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs.
- It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA.
- It simplifies code that users write while improving their apps.
2020-05-10 20:45:42 -07:00
206d0e598a
Add vectorio: for drawing shapes
...
vectorio builds on m4 express feather
Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.
VectorShape provides transpose and x/y positioning for shape implementations.
Included Shapes:
* Circle
- A radius; Circle is positioned at its axis in the VectorShape.
- You can freely modify the radius to grow and shrink the circle in-place.
* Polygon
- An ordered list of points.
- Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last
point and the first point.
- You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a
top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
x and y properties will position the rectangle relative to its top center point
* Rectangle
A width and a height.
2020-05-09 15:38:22 -07:00
8d00d99ca0
Shrink hallowing_m0_express to fit ko build
2020-05-08 22:51:21 -04:00
7f1be814c8
changed build variables as per advice
2020-05-06 09:04:15 +10:00
f63ee9fb9b
excluded countio from other smaller boards
2020-05-05 16:15:57 +10:00
d5c24b99b8
hallowing m0 - exclude countio
2020-05-05 16:04:28 +10:00
bfa5cd9c13
refactor countio based on feedback
2020-05-05 15:23:38 +10:00
602eabe668
Squeeze hallowing_m0_express build slightly
...
ko build is a little too big.
2020-05-04 17:18:53 -04:00
c377d4bea7
Merge branch 'master' into non-standard-nvm
2020-05-04 16:08:45 -04:00
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power.
...
Enable pixelbuf in its place because we'll need it soon.
2020-04-29 13:57:09 -07:00
b2de5a9df9
fixing my goofy gcc-arm local stuff
2020-04-28 12:24:10 -07:00
6c4decd4e2
decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE
2020-04-28 11:51:07 -07:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
86943ca8a1
Merge remote-tracking branch 'adafruit/master'
2020-04-27 13:51:51 -07:00
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb
...
Update tinyusb
2020-04-26 20:55:36 -07:00
bd0df9e3bc
Minor redundancy fix
2020-04-23 17:43:35 -04:00
c6c77726e7
Merge remote-tracking branch 'upstream/master' into stm32-docfix
2020-04-23 13:39:48 -04:00
8791ca6af3
implement requested changes
2020-04-23 13:33:41 -04:00
dcb0e50f04
Fix USB midi and hid disable.
2020-04-21 14:15:44 -07:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
a4d86b96fd
Merge pull request #2777 from pewpew-game/master
...
Fix RGB/BGR colors in Stage
2020-04-20 15:25:29 -07:00
5fcc6d6286
RGBMatrix: finish renaming from Protomatter
...
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
3d6258f63d
Rename Protomatter -> RGBMatrix
...
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
a32337718d
Rename _protomatter -> protomatter
...
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
7e3d4c61b5
Update TinyUSB and add interrupt hooks.
2020-04-17 14:16:49 -07:00
43022d8294
Add copyrights to pewpew m4 and ugame board.c
2020-04-17 09:50:11 +02:00
b3552efc76
Remove accidental file
2020-04-16 11:28:01 -07:00
f39ca6052e
Fix RGB/BGR colors in Stage
...
This makes the colors used by the stage library compatible with those
used by the displayio library.
2020-04-15 23:41:38 +02:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
23bced26da
samd: actually disable protomatter timer
...
Just setting the timer handler to NO_INTERRUPT doesn't stop the
interrupt from occurring.
2020-04-14 18:24:58 -05:00
759fdffda5
Update ports/atmel-samd/boards/pyportal_titano/board.c
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-04-14 18:24:58 -05:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
a51d4f7a45
pycubed: add trailing newline to file
...
POSIX specifies that text files end in a trailing newline
2020-04-14 18:24:54 -05:00
cac4fb0318
Merge branch 'master' into nfc_copy
2020-04-09 17:05:11 -05:00
49771b4d7f
Update to v1.3
2020-04-09 14:27:51 -05:00
d0a25ca9ac
Tweaks based on dhalberts feedback
2020-04-08 10:49:46 -07:00
181ecf4a9b
fixing my goofy CROSS_COMPILE fix
2020-04-07 21:54:46 -07:00
a53a26be70
missed a debug flag
2020-04-07 18:24:53 -07:00
826837186c
adds standard (non-queued) SPI support to QSPI for external flash
2020-04-07 18:17:25 -07:00
c0ba2a839f
Updates based on feedback from jepler
2020-04-06 16:03:31 -07:00
e99cf6e441
Rework sleep timing
...
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
2020-04-03 18:07:56 -07:00
46af4bdd0e
Fix SAMD21 PulseIn
2020-04-02 17:35:52 -07:00
77562a2acd
Update the supported ports
2020-03-31 18:27:55 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
7cfa8e1a68
board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.
2020-03-29 18:59:00 -04:00
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
e4c4a4a3de
Swap to committed dependencies
2020-03-27 14:39:59 -07:00
b043384949
Update built in display init
2020-03-27 14:35:29 -07:00
7fa38e8725
Update board name to bdmicro_vina_m0 to eliminate hyphens.
2020-03-27 13:37:59 -04:00
14a1e5756e
Merge branch 'master' of https://github.com/adafruit/circuitpython
2020-03-26 20:28:54 -04:00
2ae9edcbff
Add new board BDMICRO 'Vina M0'.
...
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.
Has been extensively tested with CircuitPython and works well.
2020-03-26 20:15:54 -04:00
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight
...
Add backlight polarity flag to Display
2020-03-26 14:00:47 -07:00
ff67571e9a
Add GD25Q64C as a flash chip for Sol
2020-03-26 12:33:27 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
5e559be9b5
Remove Adafruit_CircuitPython_CircuitPlayground
2020-03-24 21:10:34 +00:00
39a19d54c2
Add support for Commander
2020-03-22 16:23:56 +00:00
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button
...
Add board support for Winterbloom Big Honking Button
2020-03-18 17:37:59 -07:00
e027aaf433
Remove some build options, fix order of boards in build.yml
2020-03-18 16:49:10 -07:00
7332adfa21
Add board support for Winterbloom Big Honking Button
2020-03-18 16:29:44 -07:00
Jeff Epler
bleeptrack
Jerry Needell
root
Dan Halbert
DavePutz
Dan Halbert
Joey Castillo
Scott Shawcroft
Scott Shawcroft
ansonhe97
Taku Fukada
Radomir Dopieralski
Chris Burton
ikigaisense
Thea Flowers
Diego Elio Pettenò
Jeff Epler
svgops
Jeff Epler
Florin Trutiu
hathach
jason
Mark Olsson
warriorofwire
Daniel Pollard
Max Holliday
Lucian Copeland
Sabas
sabas1080
Brian Dean
siddacious