5deac8d249
Update board specific safe mode message
2020-09-13 18:22:40 +05:30
2fac4851a5
fix typo, tested hardware, neopixel doesnt work tho
2020-09-12 19:56:13 -04:00
6fff4ec00d
cutie variant
2020-09-12 19:00:26 -04:00
01fdd9598a
disable iimplicit-fallthrough warning inside asf4
...
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes) I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
2020-09-12 17:48:42 -05:00
5729097bc4
atmel-samd: enable build error for implicit fallthrough
...
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate. I only tested a few builds (trinket m0
and metro m4 express)
2020-09-12 15:11:29 -05:00
cacb0124ac
feather_m4_express: Use quad data mode on flash
...
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.
Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
2529ee2359
freeze rfm69 and bus_device libraries int feather_m0_rfm69
2020-09-09 14:54:20 -04:00
b49099c8f3
additional asf4 updates
2020-09-08 15:31:13 -05:00
e066448e36
atmel-samd: add same51, feather_m4_can
...
This is compile-tested, and requires updates in the related submodules:
https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37
This should not be merged until those can also be merged.
2020-09-08 13:06:45 -05:00
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c
...
fix pins for trellis_m4 board.I2C()
2020-09-04 11:15:18 -04:00
960888a3bd
fix pins for trellis_m4 board.I2C()
2020-09-03 14:22:18 -04:00
786f4ed114
Merge pull request #3344 from jepler/issue-3184
...
Fix RGBMatrix, FrameBufferDisplay bugs
2020-09-02 15:32:30 -07:00
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci
...
_bleio HCI implementation
2020-09-01 11:28:05 -07:00
952d9bbb4a
samd: Ignore a maybe-uninitialized diagnostic in asf4
...
I encountered this when changing optimization flags for debugging
purposes. The diagnostic appears spurious and unrelated to what
I'm debugging.
2020-09-01 10:55:45 -05:00
ad4bf75367
samd: only set NDEBUG for non-debug builds
2020-09-01 10:55:45 -05:00
4ac7650f22
matrix portal board
2020-08-31 23:56:38 -04:00
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
81870413af
add default I2C
2020-08-28 19:08:36 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
0cc438e6b9
Fix pycubed pwm use
2020-08-24 18:29:34 -07:00
fe0f79adce
Making requested modifications
2020-08-21 20:38:19 -05:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
58573a70e1
bring submodules up to date
2020-08-21 11:10:33 -04:00
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory
...
Update mini sam m4 memory
2020-08-20 19:05:39 -05:00
6eae7ce78f
Requested changes to pulsein
2020-08-20 16:57:00 -05:00
135626a038
Update mpconfigboard.mk
...
Added support for second type of memory chip.
2020-08-20 13:50:52 -05:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors
...
Add usb-endpoint-count checking
2020-08-20 11:21:01 -07:00
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family
...
SAM E54: Use correct CFG_TUSB_MCU
2020-08-20 11:13:05 -07:00
23aefe9509
Add usb-endpoint-count checking
...
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value. Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
2020-08-19 16:47:40 -05:00
6ae5bedf3b
SAM E54: Use correct CFG_TUSB_MCU
...
This doesn't actually change the code that is built, but it is
"more correct".
2020-08-19 11:27:52 -05:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
d01f5dc0bd
Turn off terminalio for ja and ko
...
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.
The serial output will work as usual.
2020-08-17 17:17:59 -07:00
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x
...
RFM9x -- freeze library into build
2020-08-17 17:11:35 -04:00
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50
...
The ja translation was not fitting.
2020-08-17 10:05:25 -04:00
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size
...
Squeeze firmwares to fit the new ja translation
2020-08-13 12:19:28 -04:00
239c8ff87f
metro_m0_express: put back audiobusio
...
this now fits locally (though it's very close to capacity);
let's see what the CI says.
```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
2020-08-12 19:11:33 -05:00
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2
...
Sharp Memory Display displayio support (v2)
2020-08-12 16:53:09 -07:00
aa0b4f7045
cpx_display: Put back AUDIOBUSIO, take away ROTARYIO
...
AUDIOBUSIO is needed for the on-board mic using PDMIn
2020-08-12 16:17:48 -05:00
ea8e9b8cef
metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO
...
Dan notes that this is more frequently the solution we've chosen
2020-08-12 16:17:13 -05:00
299894025a
stringcar_m0_express: make ja translation fit
2020-08-12 13:47:10 -05:00
f08ee0db20
itsybitsy_m0_express: make ja translation fit again
2020-08-12 13:44:00 -05:00
7bd42244c9
snekboard: make ja translation fit
2020-08-12 13:34:36 -05:00
45f6bc1f3e
serpente: make ja translation fit
2020-08-12 13:32:08 -05:00
36bfbaae69
feather_radiofruit_zigbee: make ja translation fit
2020-08-12 13:28:30 -05:00
58a1361d3e
Merge remote-tracking branch 'origin/main' into ja-firmware-size
2020-08-12 13:26:12 -05:00
813dcd1b73
trinket_m0_haxpress: make ja translation fit
2020-08-12 12:44:17 -05:00
88f222f1a1
metro_m0_express: make ja translation fit
2020-08-12 12:38:17 -05:00
ba91023fff
itsybitsy_m0_express: make ja translation fit
2020-08-12 12:35:29 -05:00
6b9f7c9047
hallowing_m0_express: make ja translation fit
2020-08-12 12:29:30 -05:00
58afda342d
feather_m0_supersized: make ja translation fit
2020-08-12 11:53:34 -05:00
27c2eb1869
feather_m0_express: make ja translation fit
2020-08-12 11:51:56 -05:00
8865e4ca97
circuitplayground_express_displayio: make ja translation fit
2020-08-12 11:46:52 -05:00
f3748fe20d
circuitbrains_basic_m0: Use optimization flags to let ja translation fit
2020-08-12 11:46:31 -05:00
f9d1d9d114
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 11:15:34 -05:00
454e616d13
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 10:46:56 -05:00
49407b6c06
trailing spaces fix
2020-08-12 13:42:45 +02:00
e34fac6645
Whitespace and Newline fix
2020-08-11 23:59:32 +02:00
228d9b5a12
Fixing indentation
2020-08-11 22:18:15 +02:00
22ae1dbac8
Removing unnecessary pin ignored
2020-08-11 22:17:17 +02:00
00676ff5a9
PicoPlanet
2020-08-11 21:49:52 +02:00
1cf3762392
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-10 12:54:12 -05:00
1d980d527e
Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x
2020-08-07 12:48:41 -04:00
f7961b96a9
update comment
2020-08-06 10:05:18 -04:00
c42ffb8f3d
remove usb_hid
2020-08-06 05:44:26 -04:00
432f43a472
freeze rfm9x and BusDevice, remove many built-in modules
2020-08-05 11:37:57 -04:00
c7b6e66426
Fixes for pulsein tick handling
2020-08-05 10:03:20 -05:00
93b373d617
"pop from empty %q"
...
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
ac95106b88
service discovery works; need to work on char and descriptor discovery
2020-08-04 18:24:37 -04:00
c849b781c0
Combine 'index out of range' messages
2020-08-04 14:45:45 -05:00
dddd25a776
Combine similar strings to reduce size of translations
...
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used. The net savings on trinket_m0 is
just 32 bytes.
It also means that the translation will include the original English
text, and cannot be translated. These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
0e2d231445
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-03 21:01:53 -05:00
a995a5c58f
wip: partial discovery responses; compiles; not tested
2020-08-03 21:02:57 -04:00
d7eedc5e38
Merge pull request #20 from adafruit/main
...
Update from main
2020-08-03 13:14:01 -05:00
9203a77804
Turn off interrupts while in handler
2020-08-03 11:31:12 -05:00
0a60aee3e4
wip: compiles
2020-08-02 11:36:38 -04:00
12b81618a3
Changes for getting supervisor ticks
2020-08-01 13:27:02 -05:00
1771858f4a
add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes
2020-08-01 13:20:46 -04:00
4b71831d8b
SUPEROPT_VM = 0 for de_DE
2020-08-01 12:36:20 -04:00
27c6ffb9a2
atmel-samd: gemma, trinket: Make space for de_DE translation
2020-07-30 11:29:47 -05:00
d69f081c04
Merge remote-tracking branch 'origin/main' into blm_badge
2020-07-30 07:24:48 -05:00
af135a7560
atmel-samd: move samd-specific script
2020-07-30 07:18:02 -05:00
8acec2ca35
add descriptive pin names
2020-07-29 13:49:08 -04:00
ea9bc9b4b6
set screen orientation to portrait
2020-07-29 13:46:10 -04:00
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins
...
fluff_m0: add pin aliases
2020-07-28 15:15:15 -04:00
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals
...
Use samd peripherals fixed for gcc 10
2020-07-28 15:14:20 -04:00
b30d89131b
Merge pull request #3215 from ansonhe97/main
...
Added display QSTR to Wio Terminal
2020-07-28 11:53:17 -07:00
aa97ea2501
Merge remote-tracking branch 'adafruit/main' into blm_badge
2020-07-28 14:15:02 -04:00
92216d6417
Use samd peripherals fixed for gcc 10
2020-07-28 11:14:25 -07:00
e5e132a364
add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT
2020-07-28 11:49:54 -04:00
e15bcebb6e
Added display QSTR to Wio Terminal
2020-07-28 17:31:17 +08:00
945736e9bb
add adjustments for crickit and displayio variants of CPX
2020-07-27 22:13:04 -04:00
2bdd62220e
adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice
2020-07-27 21:50:36 -04:00
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2
...
ndgGarage ndbit6 v2
2020-07-27 15:51:23 -07:00
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations
...
More type hints
2020-07-27 14:26:54 -07:00
d356581651
Fix several type hints
2020-07-27 18:05:13 +09:00
b2c4b0bcfa
fluff_m0: don't exclude portb pins explicitly
2020-07-26 17:26:32 +02:00
b1b253c012
fluff_m0: add pin aliases
...
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.
Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
2020-07-26 13:39:42 +02:00
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test
...
Changes to allow different compiler optimizations per board
2020-07-25 17:03:10 -04:00
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2
...
Add GamePad to Commander board
2020-07-25 16:57:58 -04:00
c4a5297ee2
Add GamePad to Commander
2020-07-25 17:53:27 +00:00
6696915801
fix-ndbit6-for-ndbit6_v2
2020-07-25 10:07:33 -06:00
c4817968ee
Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test
2020-07-24 23:28:41 -05:00
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
739981b34e
update for pewpew
2020-07-24 17:27:25 -05:00
a14101cd13
Use current mpconfigboard.mk with optimization change
2020-07-24 14:09:09 -05:00
b9cdf195e2
board mk file changes
2020-07-24 10:00:42 -05:00
54a342a7f5
Add and correct some type hints
2020-07-24 18:20:03 +09:00
c937fa1760
fix formatting
2020-07-23 19:29:57 -05:00
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
703fb9d4a1
update-ndGarage_ndbit6_v2
2020-07-23 16:08:30 -06:00
2bd6d05663
Add externs. GCC10 complains about duplicate defines
2020-07-22 16:26:46 -07:00
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
39e01c3938
Merge pull request #14 from adafruit/main
...
update from main
2020-07-22 11:30:49 -05:00
8ff2846bb2
Disable countio on circuitbrains basic
2020-07-21 16:21:49 -07:00
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack
...
Enable PYSTACK to keep function state out of the heap
2020-07-21 13:38:52 -07:00
5e3a853db4
Turn off GC opt on uchip board
2020-07-21 12:51:59 -07:00
678faff464
Be more aggressive with uChip build
2020-07-21 11:02:23 -07:00
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
0c6935e336
Merge branch 'main' into disable_network
2020-07-20 16:28:22 -07:00
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc
...
Add _bhb user module for Big Honking Button
2020-07-20 16:24:36 -07:00
7ba89f5330
Add _bhb user module for Big Honking Button
...
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
2020-07-18 22:45:08 -07:00
11ef43b071
pewpew_m4: Disable USB_HID back
...
German translation fails to build, so I have to disabled USB_HID after
all.
2020-07-18 20:09:30 +02:00
8d692f33a8
pewpew_m4: Enable analogio and usb_hid
...
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.
If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
2020-07-18 19:30:40 +02:00
610e0171aa
Disable existing native networking.
...
We're moving towards a co-processor model and a Wiznet library is
already available.
New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
2020-07-17 17:43:02 -07:00
6912d31560
uchip: reclaim some flash space
2020-07-17 14:32:05 -05:00
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
6160d11c5a
supervisor: factor out, Handle USB via background callback
2020-07-15 11:49:44 -05:00
742aa740f6
samd: audio: Move to background callback
...
Testing performed: Played half of the Bartlebeats album :) :)
2020-07-15 09:26:47 -05:00
51c888d4be
Merge pull request #3003 from Flameeyes/master
...
License tagging according to REUSE specifications.
2020-07-13 16:28:49 -07:00
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level
...
SAMD: make the brownout detection level configurable per board
2020-07-13 16:26:11 -04:00
f6869c69c5
wip: advertising; not tested
2020-07-12 19:45:23 -04:00
742f9cfdb0
Fluff M0: additional pins on version 1.3 of the board
2020-07-10 20:40:58 +02:00
e0733d153e
SAMD: configurable brownout, separate the variables
2020-07-09 12:17:07 +02:00
83a27edd20
SAMD: make the brownout detection level configurable per board
...
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.
In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
2020-07-08 19:59:53 +02:00
965a4961ce
Merge pull request #3120 from DavePutz/issue#3049
...
Issue#3049 -PulseIn not working in CP5.4
2020-07-07 08:59:22 -07:00
0932b64ae7
Correct for SAMD51 build
2020-07-06 23:25:33 -05:00
1b3cb17abd
Corrected file for SAMD51 build
2020-07-06 21:47:11 -05:00
ab4a453006
Made requested changes
2020-07-06 21:40:38 -05:00
846f01b2c8
Merge pull request #3113 from ansonhe97/main
...
ADD: Added Wio Terminal's functional pins and LCD driver to board init
2020-07-06 14:50:47 -07:00
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
2f80460a2f
Fluff M0: additional pins on version 1.3 of the board
2020-07-06 19:15:41 +01:00
ac33c3fe2c
Implementation of continuous synchronization of RTC during pulsein
...
Flags and code to implement continuous synchronization of RTC during pulsein
2020-07-04 21:17:19 -05:00
94d90742dd
Implementation of RTC continuous synchronization during pulsein
...
Flags and code to implement RTC continuous synchronization during pulsein
2020-07-04 21:15:38 -05:00
e514782cc6
update-with-new-usb-PID
2020-07-04 10:39:21 -06:00
36ef3476de
Fix depreciate terminology
2020-07-04 11:21:58 +08:00
2ecb46f192
Fix CI
2020-07-03 13:42:27 +08:00
2a92cf8d8b
ADD: Added LCD driver to board init
2020-07-03 12:44:20 +08:00
49aacc8596
ADD: Fixed wrong SPI pins and added more functional pins
2020-07-03 12:43:21 +08:00
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0
...
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 15:43:32 -07:00
fce35c3481
Fluff M0: additional pins on version 1.3 of the board
2020-07-02 22:57:58 +02:00
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
0537f4e775
restore-ndgarage_ndbit6-to-original
2020-07-01 14:12:52 -06:00
c759c9a2aa
add-ndgarage_ndbit6_v2-update
2020-07-01 13:58:07 -06:00
b80dbb4b2c
add-ndgarage_ndbit6_v2
2020-07-01 12:06:59 -06:00
d4e28dd233
ADD: added more special pins on Wio Terminal
2020-07-01 17:06:26 +08:00
11cb3e3b4b
hci skeleton done; not working yet
2020-06-30 23:19:40 -04:00
74ad5e80ce
Merge pull request #3089 from ansonhe97/main
...
Add: added Seeed's Wio Terminal Board Support
2020-06-30 10:58:24 -07:00
4613f80d7a
Fix end of line
2020-06-29 17:41:48 +08:00
0dd17f4418
Add: Added Seeed Wio Terminal board support
2020-06-29 16:22:41 +08:00
c5db97c50f
atmel-sam: sdio: disable debug prints by default
2020-06-26 13:16:16 -05:00
f496c0b58d
atmel-samd: Add SDIO SD card interface
2020-06-26 11:50:42 -05:00
d4b9458512
samd: sdio: Add needed files from atmel start
2020-06-26 11:50:41 -05:00
57fde2e07b
sdcardio: implement new library for SD card I/O
...
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
3e616ccead
update submodules
2020-06-26 12:21:57 -04:00
759929c24a
hci early wip; refactor supervisor bluetooth.c for nrf: tested
2020-06-25 20:57:17 -04:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
076a96ccc6
Merge pull request #3046 from jepler/same51
...
Add basic SAM E54 support and SAM E54 Xplained board
2020-06-25 06:55:27 -05:00
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices
...
Compute USB_DEVICES instead of requiring it to be specified
2020-06-24 13:31:56 -05:00
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
38659b566c
atmel-samd: Finish disabling USB MIDI and/or HID on certain boards
2020-06-23 10:56:27 -05:00
d5074220a8
atmel-samd: Add SAM E54 Xplained board
...
Few peripherals are actually tested. However, USB, I2C and GPIO seem to work.
Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.
The default SPI, I2C, and UART are the ones on the EXT2 header. This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00
da733c01da
atmel-samd: Add support for SAM E54 family MCUs
...
This introduces the new macro SAM_D5X_E5X. This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
2020-06-23 10:41:48 -05:00
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board
...
PID request for a new board configuration
2020-06-22 15:09:42 -07:00
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay
...
delay 1ms on SAMD51 when reading processor voltage
2020-06-22 14:29:43 -07:00
d43449a6d6
sparkfun samd51 thing plus: Fix board.I2C()
...
This had the SDA and SCL pins transposed, so nothing worked.
2020-06-22 10:45:27 -05:00
a770b5a919
never_reset_pin: Move pin validity check before first use of pin number
2020-06-22 10:45:27 -05:00
6638bc32c3
samd: Makefile: Regularize whitespace
2020-06-22 10:45:27 -05:00
a580f0f1c4
_pew: move to common-hal
...
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10). Move it.
There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
2020-06-22 10:45:27 -05:00
1687c8b1e3
delay 1ms on SAMD51 when reading processor voltage
2020-06-19 15:25:04 -04:00
b316549590
Added the new assigned VID/PID pair
2020-06-19 19:26:29 +03:00
178be2e3c9
loc_ber_m4_base_board
2020-06-19 18:56:20 +03:00
3c3cad5ae6
docs: Improve 5.0.x <-> main branch doc linkrot
...
This improves, but does not entirely fix, the broken links that result
from the autoapi change. It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
2020-06-14 11:12:35 -05:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
3574670226
Merge pull request #2931 from tannewt/esp32s2_digitalio
...
Finish digitalio and pin use tracking for ESP32S2
2020-05-26 19:18:45 -04:00
c917270da7
Merge pull request #2956 from hathach/fix-samd-wfi
...
fix racing issue for SAMD when executing WFI
2020-05-26 14:54:24 -07:00
ffe0e0edc3
Merge pull request #2938 from DavePutz/issue2894
...
Add an increment to tcc_refcount to allow deinit to work correctly
2020-05-26 14:39:59 -07:00
665fe7a839
Merge pull request #2945 from pewpew-game/fluff_m0
...
Add support for Fluff M0
2020-05-26 13:18:55 -07:00
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
4974c933b1
Fix swapped SCK and MISO in Fluff M0
2020-05-26 03:29:05 +02:00
e79340601f
fix racing issue for SAMD when executing WFI
2020-05-25 20:51:02 +07:00
microDev
lady ada
Jeff Epler
Scott Shawcroft
Jerry Needell
root
Dan Halbert
Dan Halbert
Lucian Copeland
Scott Shawcroft
Jeff Epler
Benjamin Shockley
Brent Rubell
bleeptrack
DavePutz
Joey Castillo
ansonhe97
Taku Fukada
Radomir Dopieralski
Chris Burton
ikigaisense
Thea Flowers
Diego Elio Pettenò
svgops
Jeff Epler
Florin Trutiu
hathach