djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,825 Commits 21 Branches 274 Tags 785 MiB
45dee6e77b
Commit Graph

992 Commits

Author SHA1 Message Date
jepler
34e2bab96a nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE 2019-08-01 18:53:07 -05:00
Jeff Epler
76f65ac694 Implement play/pause 
.. and also incidentally fix a problem where a RawSample could only
be looped 131070 times.
 2019-07-31 20:02:56 -05:00
Dan Halbert
91d791afd0 cleanup adapter.address; add uniquish suffix to BLE device name 2019-07-31 00:30:24 -04:00
Dan Halbert
83129b8c63 BLE: peripheral client pairing (not yet bonding); fix time doc formatting 2019-07-30 14:26:26 -04:00
Jeff Epler
b72352949b PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_ 2019-07-29 18:39:00 -04:00
Dan Halbert
28ca05ccdc allow discovery from central or peripheral 2019-07-27 13:22:15 -04:00
Jeff Epler
a183425e00 ports/nrf: Implement audioio.AudioOut using PWM 
This implements AudioOut, with known caveats:
 * pause/resume are not yet implemented (this is just a bug)
 * at best, the sample fidelity is 8 bits (this is a hardware limitation)

Testing performed:

My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker.  There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected.  It is powered from
VUSB.

I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive.  This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270

Nothing about the code I've written should limit the usable pins.

All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
 2019-07-26 07:57:11 -05:00
Jeff Epler
2bc704fe07 ports/nrf: factor out routines for allocating, freeing pwm channels 2019-07-26 07:52:37 -05:00
Scott Shawcroft
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup 
Add STM32 Discovery F412ZG and F411RE support
 2019-07-24 18:49:48 -07:00
hathach
c921f6637f update tinyusb lib to 0.5.x 2019-07-24 16:46:31 +07:00
Dan Halbert
82ab998cd5
Merge pull request #1998 from tannewt/monocolor 
Add support for grayscale displays
 2019-07-22 22:30:28 -04:00
Hierophect
58630a844a Add feature conditionals and clean up 2019-07-22 12:58:28 -04:00
Tavish Naruka
e4d92a3aad
Fix incorrect preprocessor define NRFX_TIMER3/4 
Should be NRF_TIMER3 and NRF_TIMER4
 2019-07-22 20:07:05 +05:30
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth. 
This also improves Palette so it stores the original RGB888 colors.

Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.

Fixes #1828. Fixes #1956
 2019-07-19 16:06:11 -07:00
Scott Shawcroft
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements 
Blip improvements
 2019-07-19 10:52:08 -07:00
Tavish Naruka
724ce4acba enable libraries needed by BlipBoy Shield 2019-07-19 18:48:08 +05:30
Hierophect
43e8a4110f Add missing files for DigitalIO 2019-07-17 14:18:01 -04:00
Dan Halbert
364ee62d10 Address review comments. 2019-07-16 19:53:36 -04:00
Dan Halbert
1cf8a3e8d8 Merge remote-tracking branch 'adafruit/master' into ble-scanner 2019-07-11 18:42:16 -04:00
Scott Shawcroft
6fad383367
Merge pull request #1925 from C47D/rgb_status 
Initial support for RGB led as Status indicator, fixes #1382
 2019-07-09 10:31:34 -07:00
Dan Halbert
6a001786a9 merge from master 2019-07-09 08:58:49 -04:00
Dan Halbert
118b26b335 UARTClient now works both directions 2019-07-09 00:21:46 -04:00
Dan Halbert
09ddff8df1 WIP: Need descriptors for Central CCCD discovery; not done yet 2019-07-07 00:07:47 -04:00
Scott Shawcroft
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset 
it's pins.
 2019-07-06 12:48:16 -07:00
iot49
6e5d70fa19 changed type of receiver_buffer_size to uint16_t 2019-07-03 12:02:01 -07:00
Dan Halbert
bf8a35b2f8 WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service 2019-07-02 22:34:54 -04:00
Dan Halbert
6ea01ea9b0 Central is connecting; characteristics can be read and written 2019-06-29 00:20:06 -04:00
Hierophect
16ba035ba7 first commit, very crude 2019-06-28 15:36:08 -04:00
Dan Halbert
140904ec84 getting Scanner to work 2019-06-22 22:10:15 -04:00
Dan Halbert
4881e1ff55 WIP: Central compiles; now will test 2019-06-21 18:04:04 -04:00
Dan Halbert
23bd861c9a nrf: fix neopixel_write pwm buf size calc 2019-06-20 18:02:14 -04:00
Dan Halbert
24ac1fdcab WIP: backup only; not compiled 2019-06-19 21:54:28 -04:00
Dan Halbert
a1b5d800f3 Update copyrights; get ready for Central 2019-06-19 10:42:36 -04:00
Dan Halbert
35b9191857 Don't operate directly on bleio objects in shared-bindings: use common_hal 
routines instead. Changes made but not yet tested.
 2019-06-18 23:46:20 -04:00
Dan Halbert
1356819de1 Handle None for BLE name; fix ScanEntry bug; compile issue 2019-06-17 23:16:40 -04:00
Dan Halbert
bed6d43a76 merge from upstream; WIP redo Address; no more AddressType 2019-06-13 21:55:07 -04:00
Dan Halbert
62de2506e4 Include display objects in gc. 2019-06-06 17:49:32 -04:00
Dan Halbert
1905d90eaa Make advertising data buffers long-lived 2019-06-05 20:08:53 -04:00
Tavish Naruka
4a7122d354 boards: add support for Electronut labs Blip 
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
 2019-06-05 00:49:29 +05:30
Dan Halbert
613e12f99f Replace Broadcaster with enhanced Peripheral 2019-06-03 20:40:05 -04:00
Dan Halbert
63ac37946d 1. Remove advertising data construction in C: it's all done in Python now 
2. Add scan response capability to advertising.
 2019-06-02 23:21:30 -04:00
Dan Halbert
12f1d9d30c fix advertisement length check; add Service.secondary attribute 2019-05-31 18:03:05 -04:00
Dan Halbert
6cec81bcb5 Need to enable ble before scanning 2019-05-23 22:05:16 -04:00
Dan Halbert
1639354e5f Scanner working, but not very first time 2019-05-23 16:07:54 -04:00
Scott Shawcroft
9feb844b7e
Fix crash in internal filesystem on nrf 
Fixes #1842
 2019-05-08 15:43:18 -07:00
Dan Halbert
15b7946fc4 Off-by-one error for usage of MAX_TX_IN_PROGRESS 2019-04-22 22:07:48 -04:00
Scott Shawcroft
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1 
add support for USER_C_MODULES
 2019-04-17 09:41:20 -07:00
Dan Halbert
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3 
Circuitpython nickzoic 1042 nrf nvm bytearray 3
 2019-04-16 15:05:18 -04:00
Tavish Naruka
32a0855d18 Add support for Electronut Labs Papyr. 
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
 2019-04-16 12:59:42 +05:30
Nick Moore
9c42a72275 Fix up single-byte access to nvm.ByteArray 2019-04-16 14:53:44 +10:00
Nick Moore
83dad37562 Fixups for adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore
02dd32da60 Make some space for NVM adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore
f22c01a05e Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write 
adafruit/circuitpython#1610
 2019-04-16 14:53:44 +10:00
Nick Moore
66e8ceafad switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write 
adafruit/circuitpython#1610
 2019-04-16 14:53:44 +10:00
Nick Moore
fd83cf2048 Add a peripherals/nrf/nvm.c to wrap flash page writes safely 2019-04-16 14:53:44 +10:00
Nick Moore
d0e5af3b09 Working flash pages for nvm.ByteArray adafruit/circuitpython#1042 
import microcontroller

def dump(n = microcontroller.nvm):
    for i in range(0,len(n)):
        print ("%02X " % n[i], end="")
        if i % 16 == 15: print('')

microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
 2019-04-16 14:53:44 +10:00
Nick Moore
531cf7eb4c switch CIRCUITPY_NVM on! 2019-04-16 14:53:44 +10:00
Nick Moore
933500c448 nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore
df89156f2f Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet) 2019-04-16 14:53:44 +10:00
Scott Shawcroft
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768" 2019-04-15 18:50:33 -07:00
Dan Halbert
864910559b fix subscripting 2019-04-10 21:41:55 -04:00
Dan Halbert
3618461f9b Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2 2019-04-10 14:09:26 -04:00
Scott Shawcroft
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks 
Don't let a background task call run_background_tasks()
 2019-04-09 18:39:28 -07:00
Dan Halbert
d633928a16 Don't let a background task call run_background_tasks() 2019-04-09 20:23:01 -04:00
Nick Moore
18908c21f7 Fixups for adafruit/circuitpython#1042 2019-04-09 12:53:11 +10:00
Nick Moore
fdaff00c78 Make some space for NVM adafruit/circuitpython#1042 2019-04-09 10:56:53 +10:00
Nick Moore
bcb87ffd6c Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write 
adafruit/circuitpython#1610
 2019-04-09 10:56:53 +10:00
Nick Moore
bc92441803 switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write 
adafruit/circuitpython#1610
 2019-04-09 10:55:39 +10:00
Nick Moore
cd69db7770 Add a peripherals/nrf/nvm.c to wrap flash page writes safely 2019-04-09 10:55:39 +10:00
Nick Moore
8e7fee2246 Working flash pages for nvm.ByteArray adafruit/circuitpython#1042 
import microcontroller

def dump(n = microcontroller.nvm):
    for i in range(0,len(n)):
        print ("%02X " % n[i], end="")
        if i % 16 == 15: print('')

microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
 2019-04-09 10:55:39 +10:00
Nick Moore
592bd0140a switch CIRCUITPY_NVM on! 2019-04-09 10:55:15 +10:00
Nick Moore
492431a694 nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042 2019-04-09 10:54:11 +10:00
Nick Moore
f8e5e2da64 Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet) 2019-04-09 10:54:11 +10:00
Scott Shawcroft
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display 2019-04-08 17:15:08 -07:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Scott Shawcroft
049b9ca094
Remove terse TODOs 2019-04-08 14:46:45 -07:00
Radomir Dopieralski
8323721232 Stop hard-coding SPI frequency in FourWire 
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
 2019-04-06 15:15:29 +02:00
Damiano Mazzella
8428fa0f64
Update Makefile 2019-04-05 21:42:29 +02:00
Scott Shawcroft
ceb6f2e4fc
Rework flash flush so it preserves the cache 
This should make filesystem writes quicker and cause less heap
churn.
 2019-04-03 18:28:27 -07:00
Nick Moore
781d301bb6 Remove unnecessary MP_WEAK declarations 2019-04-02 13:33:22 +11:00
Scott Shawcroft
92095eb666 Update comment 2019-04-02 13:28:35 +11:00
Nick Moore
94bda3bde1 Change nRF RTC implementation to use RTC2 #1046 
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
 2019-04-02 13:28:22 +11:00
Nick Moore
6afe23d0b0 There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046 2019-04-02 13:28:03 +11:00
Nick Moore
6206fa9a82 adafruit/circuitpython#1046 handle overflows in the RTC counter 2019-04-02 13:27:45 +11:00
Nick Moore
f846fa109e enable NRFX RTC adafruit/circuitpython#1046 2019-04-02 13:27:28 +11:00
Nick Moore
f88f9fd748 more fake RTC code ... adafruit/circuitpython#1046 
(works if MP_WEAK common_hal_rtc_get_time is removed)
 2019-04-02 13:27:13 +11:00
Nick Moore
4a5c52fbd6 starting on #1046 rtc for nRF 2019-04-02 13:27:00 +11:00
Dan Halbert
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc" 2019-03-29 16:41:29 -04:00
Scott Shawcroft
98811a9675
Update comment 2019-03-28 09:29:18 -07:00
Nick Moore
71622a4515 There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046 2019-03-28 09:50:09 +11:00
Nick Moore
28254def0b adafruit/circuitpython#1046 handle overflows in the RTC counter 2019-03-28 09:50:09 +11:00
Nick Moore
b09d2c3c62 enable NRFX RTC adafruit/circuitpython#1046 2019-03-28 09:50:09 +11:00
Nick Moore
69cf33e6a1 more fake RTC code ... adafruit/circuitpython#1046 
(works if MP_WEAK common_hal_rtc_get_time is removed)
 2019-03-28 09:50:09 +11:00
Nick Moore
77f307c642 starting on #1046 rtc for nRF 2019-03-28 09:50:09 +11:00
Scott Shawcroft
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush 
flush flash filesystem once a second
 2019-03-26 13:47:43 -07:00
Radomir Dopieralski
f440e41819 Really fix the error messages in bleio, this time 2019-03-25 14:04:50 +01:00
Radomir Dopieralski
bb10a8aaa1 Fix error messages in bleio 2019-03-25 09:19:48 +01:00
Dan Halbert
fe555a4098 Allow NFC pins to be used for other purposes. 2019-03-21 11:22:58 -04:00
Dan Halbert
fbf166af1a enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit 2019-03-20 14:36:24 -04:00
Dan Halbert
2459eabd66 flush flash filesystem once a second 2019-03-20 12:21:36 -04:00
Dan Halbert
9cceea0d68 nrf: fix internal flash writes 2019-03-18 09:11:40 -04:00
Dan Halbert
c4586c0531 nrf: Disable SPIM3; add SPIM1; remove TWIM1 2019-03-12 08:31:03 -04:00
sommersoft
2cd6a79016 better handle frequencyio inclusion 2019-03-01 22:46:57 -06:00
Jerry Needell
bd13834a74 implement default busses for particle boards 2019-02-24 09:34:33 -05:00
Kattni
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer 
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
 2019-02-21 12:28:41 -05:00
Dan Halbert
99da3b9646 Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list 2019-02-21 00:19:31 -05:00
Dan Halbert
9c24c804fb Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD. 2019-02-18 22:44:31 -05:00
Dan Halbert
5ec92415b0 fix module weak links; add missing nrf features 2019-02-17 17:29:28 -05:00
Dan Halbert
7b3f7605b8 address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE 2019-02-15 20:32:32 -05:00
Dan Halbert
a345ef28f2 finish Makefile refactoring; nrf builds work 2019-02-15 18:55:10 -05:00
Dan Halbert
5154e0581e WIP: atmel-samd trinket build works 2019-02-15 00:28:20 -05:00
Dan Halbert
ab4194f752 don't allocate DMA buffer as long-lived 2019-02-13 19:49:57 -05:00
Dan Halbert
e92d90ce9c Add second UARTE to busio.UART. Init uarts on startup. 2019-02-12 22:34:05 -05:00
Scott Shawcroft
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd. 2019-02-11 20:55:06 -08:00
Scott Shawcroft
c17f147be9
A variety of displayio improvements 
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
  a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
 2019-02-11 20:55:05 -08:00
Scott Shawcroft
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio 
Circuitpython nickzoic 1045 nrf rotaryio
 2019-02-07 10:38:20 -08:00
Nick Moore
b9db977a2d Change pin mode to pullup for adafruit/circuitpython#1045 2019-02-07 09:47:56 +11:00
Nick Moore
a7c349bc6e Add quarter-click logic to adafruit/circuitpython#1045 2019-02-05 16:41:33 +11:00
Nick Moore
95454ecde0 useful output from rotaryio adafruit/circuitpython#1045 2019-02-05 16:41:33 +11:00
Nick Moore
21eb7e8e64 GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045 2019-02-05 14:15:13 +11:00
Nick Moore
ee21cc163f Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!) 2019-02-05 14:15:03 +11:00
Scott Shawcroft
ec03887040
Fix hallowing and nrf builds 2019-01-31 11:42:15 -08:00
hathach
a51f2b0716 refactor nrfx from supervisor/usb.c 2019-01-30 22:30:23 +07:00
hathach
164e1e2341 re-init usb hardware when enable/disable SD 2019-01-30 14:13:07 +07:00
hathach
d1fb384a4a
update tinyusb, work better with sd 2019-01-29 21:03:18 +07:00
Scott Shawcroft
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048 
Nickzoic/circuitpython nrf touchin 1048
 2019-01-28 00:22:34 -08:00
Nick Moore
294b026aca Automatically set a default threshold for touchio.TouchIn channels 2019-01-28 18:22:57 +11:00
Nick Moore
539aaf08b5 speed up measurement loop 2019-01-27 21:54:59 +11:00
Nick Moore
4a093294ac hugely simplified version of the touchio.TouchIn.get_raw_reading code (adafruit/circuitpython#1048) 2019-01-27 15:08:03 +11:00
Dan Halbert
7998a7696d also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android: 2019-01-23 22:12:38 -05:00
Dan Halbert
b1f1bb1389 support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices 2019-01-23 21:07:23 -05:00
Scott Shawcroft
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD 2019-01-22 14:02:07 -08:00
Dan Halbert
e170e03f8c Merge remote-tracking branch 'adafruit/master' into bleio2 2019-01-21 20:38:26 -05:00
Dan Halbert
28cfd8a513 CharacteristicBuffer: make it be a stream class; add locking 2019-01-19 19:45:35 -05:00
Roy Hooper
50af08a6f3 Merge branch 'master' into pixelbuf 2019-01-19 16:33:59 -05:00
Scott Shawcroft
edc8383e22
Improvements thanks to danh's review 2019-01-18 16:37:06 -08:00
Scott Shawcroft
fddc98858a
fix nonetype handling and nrf never reset 2019-01-17 18:51:40 -08:00
Scott Shawcroft
6404aaf411
Fix up nrf and using board.SPI in FourWire 2019-01-17 18:19:07 -08:00
Scott Shawcroft
760bd8d8a4
share fourwire and make nrf compile 2019-01-17 15:15:59 -08:00
Scott Shawcroft
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle 
Add Makerdiary nRF52840 MDK USB dongle support.
 2019-01-15 23:05:15 -08:00
Gregory P. Smith
91452ec9cb Mention the MDK USB Dongle. 2019-01-15 21:24:36 -08:00
dsiee
af0f1a7542
Update pins.c 
whitespace
 2019-01-16 15:02:48 +11:00
dsiee
c2d39a7ab7
Update pins.c 2019-01-16 14:58:16 +11:00
dsiee
ac238838f2
Update pins.c 
add declaration for RED_LED as D3 to match silkscreen.
 2019-01-16 14:48:41 +11:00
Gregory P. Smith
7296b647ef Add MDK nRF52840 MDK USB Dongle support. 
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/.

A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
 2019-01-15 01:37:22 -08:00
Roy Hooper
ffe734edf7 Fresh combined checkin of _pixelbuf library. 2019-01-13 23:51:13 -05:00
Scott Shawcroft
62a8cc2825
Merge pull request #1453 from tannewt/text_on_pyportal 
Enable the display on pyportal
 2019-01-11 10:33:16 -08:00
Dan Halbert
50ee5ef24c merge translations; add bleio comments; fix minor sphinx issues in midi 2019-01-10 21:12:17 -05:00
Scott Shawcroft
19db886645
Support the display on the pyportal. 
Also fix #1390, reload during sleep broken.
 2019-01-10 17:29:34 -08:00
Dan Halbert
516d7da641
Merge pull request #1449 from tannewt/midi 
Add USB MIDI support for SAMD and nRF.
 2019-01-10 19:49:33 -05:00
hathach
ee410b2cf1 Merge branch 'master' into nrf52_pulsein 2019-01-10 10:54:40 +07:00
Dan Halbert
d3b8581ce0 fix merge conflicts; address some comments 2019-01-09 19:59:48 -05:00
Scott Shawcroft
b5e40f52c2
Add USB MIDI support for SAMD and nRF. 
The API should be identical to using a UART for MIDI.

Fixes #672
 2019-01-09 14:02:11 -08:00
Dan Halbert
d41ed768dc Fix sphinx build issues; add better travis fold reporting; update author info 2019-01-09 16:22:19 -05:00
Dan Halbert
89af666093 fix sphinx complaint; more travis fold status reporting 2019-01-09 10:36:38 -05:00
hathach
f366e3feea Merge branch 'master' into nrf52_pulsein 2019-01-09 20:39:35 +07:00
hathach
cfc4c8cbfa
minor clean up 2019-01-09 15:43:54 +07:00
hathach
db82160eef
fix pulsein incorrect compute 2019-01-09 15:15:30 +07:00
Dan Halbert
13d607698e m_tx_in_progress might underflow (check on this) 2019-01-08 16:37:14 -05:00
Dan Halbert
50641c4152 remove debugging printf's 2019-01-08 15:52:21 -05:00
Dan Halbert
f66f55b4ed add CharacteristicBuffer; UART seems to work! 2019-01-07 22:46:20 -05:00
hathach
215008f78c
clean up neopixel write !! 2019-01-08 00:21:31 +07:00
Dan Halbert
a77b2363ef evt handler list bugs; unique evt handler names; remove uuid128_reference 2019-01-03 21:42:42 -05:00
Dan Halbert
8dea6f53bb forgot to store data when reading a gatts value 2019-01-03 14:16:41 -05:00
Dan Halbert
87c6f33bcc Broadcaster now takes whole packet. Also should be scannable 2019-01-01 14:11:59 -05:00
Dan Halbert
941ccf87c8 don't free event handler list manually; let gc do it 2018-12-31 09:02:43 -05:00
Dan Halbert
b6b5ed9c89 Remove nRF52832 support 2018-12-30 22:49:20 -05:00
Dan Halbert
1dc3957e72 LocalPeripheral is now Peripheral; more work on basic GATTS support; UART not working yet 2018-12-30 22:33:49 -05:00
Dan Halbert
ef39e72c7c free event handlers on reset; fix typo in Broadcaster 2018-12-29 13:55:10 -05:00
Dan Halbert
de7cadb9b2 fix typos in internal_flash.c 2018-12-29 00:08:04 -05:00
Dan Halbert
145e110915 Merge remote-tracking branch 'adafruit/master' into bleio-rev 2018-12-29 00:00:39 -05:00
Dan Halbert
4d1f0ec07b Add Broadcaster. Reset correctly on reload. 2018-12-28 23:34:23 -05:00
hathach
6b0d93cea3
correct i2c max len 2018-12-28 21:14:27 +07:00
hathach
a4ee80832a
fix #1422 correct i2c max xfer len (size in bits) 2018-12-28 16:30:11 +07:00
hathach
3ee766bc01
put received bytes to fifo when error 2018-12-28 01:05:30 +07:00
hathach
d092722ae8
fix #1407 keep receiving in case of error 2018-12-28 00:40:29 +07:00
Jerry Needell
55084b30ef remome FRAMEBUF from nrf builds - use QSPI for particle ARGON 2018-12-27 09:38:35 -05:00
Dan Halbert
4167bf5b24 wip: advertising works, but not connection 2018-12-27 00:04:04 -05:00
Dan Halbert
f5b15c9b4d Merge remote-tracking branch 'origin/feather52840-rgb-qspi-fixes' into bleio-rev 2018-12-21 21:28:24 -05:00
Dan Halbert
0dfe2dbff0 return error status on more routines; minor simplification of freq setting 2018-12-21 12:30:54 -05:00
Dan Halbert
bce6d124af Don't check for corrupt heap too early; Fix QSPI timing 2018-12-20 21:28:36 -05:00
hathach
6752266673 added pulsein using gpiote (gpio interrupt) 2018-12-18 22:05:17 +07:00
Dan Halbert
bfa66861ef Merge remote-tracking branch 'adafruit/master' into bleio-rev 2018-12-13 16:33:15 -05:00
hathach
b37b2fa7e7 overwrite old data if fifo is full 2018-12-13 23:56:06 +07:00
hathach
e136222ae2 use rbuf for busio uart 2018-12-13 23:48:53 +07:00
Scott Shawcroft
70939ad517
Merge pull request #1395 from jerryneedell/jerryn_cpython 
enable MICROPY_CPYTHON_COMPAT
 2018-12-11 10:54:17 -08:00
Scott Shawcroft
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis. 2018-12-10 20:32:19 -08:00
Scott Shawcroft
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840 2018-12-10 20:13:36 -08:00
Nick Moore
1dc4c4757e touchio.TouchIn sensing working on a single pin! adafruit/circuitpython#1048 2018-12-11 14:33:35 +11:00
Jerry Needell
a90343022a enble MICROPYTHON_CPYTHON_COMPAT - fix mpconfigport.h to allow and enable a few more items for compatiblilty with other builds 2018-12-10 16:35:40 -05:00
Nick Moore
901db4797e progress on NRF touchio.TouchIn #1048 2018-12-09 16:48:33 +11:00
Scott Shawcroft
801d9a5abc
Fix running the USB task on nRF. 
It wasn't being run due to a rework done only on the atmel-samd port.
The rework itself isn't needed now that the heap check triggers safe
mode instead of throwing a Python exception. So, I've removed the
rework.
 2018-12-07 16:11:21 -08:00
Dan Halbert
a7a24096f4 bleio WIP: redo for more immutability; use sd_* routines for internal flash write 2018-12-07 16:52:47 -05:00
Scott Shawcroft
332ea8853f
Macro guard VDDH inclusion. 2018-12-06 16:38:14 -08:00
Scott Shawcroft
6ef8639971
Rework safe mode and have heap overwrite trigger it. 
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.

The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.

A couple NeoPixel fixes are included for the nRF52 as well.

Fixes #1034. Fixes #990. Fixes #615.
 2018-12-06 14:24:20 -08:00
Dan Halbert
125901e4e2 Merge remote-tracking branch 'adafruit/master' into bleio-rev 2018-12-06 12:41:38 -05:00
Scott Shawcroft
b25bf062fb
Add correct flash chip for Particle Mesh boards 2018-12-04 18:20:51 -08:00
Scott Shawcroft
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build 2018-12-04 18:20:48 -08:00
Dan Halbert
63cd9209f1 allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins 2018-12-04 15:05:39 -05:00
Nick Moore
452a622459 Set up structure for touchio adafruit/circuitpython#1048 (does nothing yet) 2018-12-04 17:12:02 +11:00
Dan Halbert
80db2cec99 UART changes: timeout in secs, write bytes, etc. 2018-12-03 12:04:32 -05:00
jimblom
09316b35d7 remove non-broken-out nrf pins. re-organize pins.c list. 2018-11-30 14:58:36 -07:00
Scott Shawcroft
6e15ab6385
Stop ignoring SD hex files and improve the error when its missing. 2018-11-30 13:26:12 -08:00
Scott Shawcroft
df18d22a93
Capture stderr as well and work on nRF build 2018-11-30 12:59:05 -08:00
jimblom
f67814fc97 Adding SparkFun nRF52840 Mini board support. 2018-11-30 13:57:22 -07:00
Scott Shawcroft
cf70dc4f1c
Fix BLE build 2018-11-30 11:53:33 -08:00
Scott Shawcroft
9d07e95351
Add support for adding release info into adafruit/circuitpython-org 
This also changes the build script to python with better output.
 2018-11-30 00:30:57 -08:00
Scott Shawcroft
60480ff4ed
Merge pull request #1351 from jepler/issue1307-ujson 
json: enable on nrf boards and "large flash" M4 samd boards
 2018-11-27 11:29:29 -08:00
Scott Shawcroft
d446d328d8
Fix QSPI on Feather nRF52840 
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
 2018-11-27 00:13:24 -08:00
Dan Halbert
3164b16196 WIP: debug; add hash and __eq__ to UUID 2018-11-26 21:09:17 -05:00
Dan Halbert
6fb7590280 Merge remote-tracking branch 'adafruit/master' into bleio-rev 2018-11-26 10:16:29 -05:00
Scott Shawcroft
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel 2018-11-23 14:22:07 -08:00
Scott Shawcroft
324301e3bc
Update tinyusb to include control fixes. 2018-11-23 13:28:10 -08:00
Jeff Epler
52fd151c9c ports/nrf: enable json module on nrf boards generally 2018-11-22 10:35:57 -06:00
Dan Halbert
5fe746f643 Latest Feather nRF52840 pin revisions 2018-11-21 19:46:49 -05:00
Dan Halbert
1763ffe245 More UUID work; use mp_raise for exceptions 2018-11-20 23:04:58 -05:00
Dan Halbert
31cc71f7fb WIP: bleio revisions 2018-11-20 09:36:45 -05:00
Scott Shawcroft
b67c53edfa
Factor out of external flash as well. 
Plus some cleanup.

Fixes #1324
 2018-11-14 18:30:47 -08:00
Scott Shawcroft
87ddd64481
Factor out fake partition 2018-11-14 17:59:11 -08:00
Scott Shawcroft
47212ee31e
start debug 2018-11-14 17:21:48 -08:00
Scott Shawcroft
355abc835e
Fix output overflow and make help translatable 2018-11-09 16:41:08 -08:00
Scott Shawcroft
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash. 
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
 2018-11-08 17:25:30 -08:00
Dan Halbert
64d457dad9 bring bleio PR up to date 2018-11-07 14:12:22 -05:00
Dan Halbert
e203ce9ce5 Use adafruit/nrfx fork of NordicSemiconductor/nrfx 2018-10-31 23:18:59 -04:00
arturo182
4bc24c4f60 bleio: Fix errors after rebase 2018-10-21 17:15:27 +02:00
arturo182
eceb21a017 bleio: Don't register the services until needed 
Because of the very specific way nRF requires service registration
(characteristics can be added only to last added service), we would
have to write the Python code in a specific way. With this patch the
user has more freedom.
 2018-10-21 16:00:04 +02:00
arturo182
19fab4af5a bleio: Remove deep copy constructor for UUID 2018-10-21 15:59:50 +02:00
arturo182
b5e5805bb4 bleio: Remove redundant struct field 2018-10-21 15:59:46 +02:00
arturo182
c7b42d80b3 bleio: A bit of cleanup 2018-10-21 15:59:42 +02:00
arturo182
cf79316002 nrf: Fix ble uart using the new API 2018-10-21 15:59:36 +02:00
arturo182
d5a71a4b8a nrf: Move bluetooth driver to the 'bluetooth' folder 2018-10-21 15:55:25 +02:00
arturo182
17f13ecc2c nrf: Cleanup of the ble driver 
Moved the functions to classes that they belong to.
 2018-10-21 15:54:13 +02:00
arturo182
77eeecbfd9 nrf: BLE driver cleanup 2018-10-21 15:52:36 +02:00
arturo182
6545aa99a9 nrf: Remove the ble drv specific characteristic struct 2018-10-21 15:51:04 +02:00
arturo182
98aa8c5923 nrf: Remove the ble drv specific service struct 2018-10-21 15:51:01 +02:00
arturo182
3df7dea2cc nrf: Remove the ble drv specific advertisement data struct 2018-10-21 15:50:59 +02:00
arturo182
4b344812bf nrf: Remove the ble drv specific address struct 2018-10-21 15:50:56 +02:00
arturo182
3bd65fbae5 nrf: Move the Peripheral class to bleio as Device 
This was the last class from ubluepy and so that module is now gone.
The Device class offers both Peripheral and Central functionality.
See the inline docs for more info.
 2018-10-21 15:50:45 +02:00
arturo182
bda734223e nrf: Move the Service class from ubluepy to the shared bleio module 2018-10-21 15:43:51 +02:00
arturo182
cc78249226 nrf: Move the Characteristic class from ubluepy to the shared bleio module 2018-10-21 15:43:48 +02:00
arturo182
61bf4a16a7 nrf: Remove unused ubluepy classes 2018-10-21 15:43:39 +02:00
arturo182
1c6bf9a150 bleio: Move the Scanner class to a shared module 2018-10-21 15:43:29 +02:00
arturo182
7390dc7dab bleio: Move ScanEntry to shared module and add a new AdvertisementData class 2018-10-21 15:43:24 +02:00
arturo182
345334aaf1 bleio: Add a new Address class 
Use the new in the Adapter singleton.
 2018-10-21 15:43:21 +02:00
arturo182
d5f942a971 bleio: Add a AddressType enum-like class 2018-10-21 15:43:17 +02:00
arturo182
20b8d5169d nrf: Move the Descriptor class from ubluepy to the shared bleio module 2018-10-21 15:43:13 +02:00
arturo182
f4940c9aec nrf: Move the UUID class from ubluepy to the shared bleio module 
Also added a UUIDType enum-like class for determining UUID type.
 2018-10-21 15:43:08 +02:00
Josh Klar
aefabc5353
Update docs to reflect proper size of device 2018-10-20 03:29:20 -07:00
Josh Klar
4c75a60bd3
Declobber a DEFINE 2018-10-20 02:57:17 -07:00
Josh Klar
16ca9c8c7c
Makefile fixes and some docs 2018-10-20 02:43:13 -07:00
Josh Klar
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK 2018-10-20 02:43:12 -07:00
Dan Halbert
b3c7746a7f fix copyright notice 2018-10-16 11:09:37 -04:00
Dan Halbert
2262efc311 PulseOut working 2018-10-16 11:05:02 -04:00
Dan Halbert
8d58093328
Merge pull request #1259 from dhalbert/nrf-pwmout 
Allow variable freq PWMOut; use multiple channels if same freq
 2018-10-10 12:27:27 -04:00
Scott Shawcroft
df80ad8e6e
Merge pull request #1193 from ATMakersBill/master 
Add supervisor.runtime.serial_bytes_available so that input() can be used without blocking.
 2018-10-09 23:58:43 -07:00
Dan Halbert
ca737e6f7c Don't disable tempoarily in deinit(). 2018-10-09 21:23:47 -04:00
Dan Halbert
91a88cf568 Allow variable freq PWMOut; use multiple channels if same freq 2018-10-09 20:52:55 -04:00
ATMakersBill
9f94712ad1 replacing change to input() with separate method to check for USB Serial input 2018-10-09 18:37:52 -04:00
Jerry Needell
fd0ea85549 add force_create to nrf filesystem_init() 2018-10-06 08:03:27 -04:00
hathach
21ddb6b9b9 fix tinyusb cdc issue 2018-10-05 21:37:16 +07:00
Dan Halbert
6049776b26
Merge branch 'master' into nrf52_uart_io 2018-10-03 13:31:48 -04:00
Scott Shawcroft
86ae707b08
Merge pull request #1223 from dhalbert/spi-baudrate 
nrf: remove error check for SPI baudrate too high; round to nearest baudrate
 2018-10-03 10:11:44 -07:00
hathach
b8884ccc8b Merge branch 'master' into nrf52_uart_io 2018-10-03 23:13:56 +07:00
Enrico Paganin
4b9099358f Fix 'advertisement' typo 2018-10-03 09:56:30 +02:00
hathach
08cbb03bdd implement common_hal_busio_uart_clear_rx_buffer 2018-10-03 11:39:01 +07:00
hathach
f543c8415d "busio.UART not yet implemented -> not available 2018-10-03 11:30:31 +07:00
Dan Halbert
21d331c8cc round SPI freq down; check max freq 2018-10-02 21:06:40 -04:00
Dan Halbert
aa95526428 nrf: remove error check for SPI baudrate too high; round to nearest baudrate 2018-10-01 18:54:13 -04:00
Dan Halbert
48a3aafdd2 reset I2C and SPI on ctrl-D 2018-09-25 15:12:10 -04:00
hathach
76d6fb03f0 more clean up 2018-09-26 02:12:06 +07:00
hathach
eba80f7a99 update translate string 2018-09-26 02:10:44 +07:00
hathach
52328c88cd remove space 2018-09-26 02:06:32 +07:00
hathach
74cc55b107 change error type to runtime 2018-09-25 17:31:53 +07:00
hathach
f724647a45 fix feather nrf52840 build error 2018-09-25 17:09:54 +07:00
hathach
dec5c50c45 clean up 2018-09-25 16:22:14 +07:00
hathach
2f0e0bdcaf migrate serial from uart to uarte 2018-09-25 16:14:44 +07:00
hathach
9017c9d29a clean up 2018-09-25 14:29:45 +07:00
hathach
d3e5ba83eb update nrfx to 1.3.0 2018-09-25 13:00:57 +07:00
hathach
d714479924 clean up 2018-09-25 12:48:48 +07:00
hathach
01c1296197 nrf52 uart io rx work reliably 2018-09-25 12:37:31 +07:00
hathach
1782ceab35 uarte malloc if buffer is not in SRAM 2018-09-24 16:18:49 +07:00
hathach
4015023e01 clean up uart io 2018-09-24 16:12:05 +07:00
hathach
7bbd449f06 uarte rx work fine 2018-09-24 15:54:32 +07:00
hathach
fdd3e91753 changing to nrf uarte, tx works fine 2018-09-24 14:56:52 +07:00
hathach
7a1b4ccc9b Merge branch 'master' into nrf52_uart_io 2018-09-24 12:50:48 +07:00
Scott Shawcroft
f2c960e89b
Merge pull request #1205 from hathach/nrf52_autoreload 
add autoreload for nrf52
 2018-09-21 16:48:21 -04:00
hathach
e1fe7e71a1 add autoreload 2018-09-22 02:08:00 +07:00
Dan Halbert
2c15d12f2f allow multiple I2C and SPI; improve nrfx_config.h 2018-09-20 20:45:30 -04:00
hathach
816ff05253 clean up 2018-09-21 03:53:35 +07:00
hathach
dddc437ea7 got rx working finally 2018-09-21 03:48:13 +07:00
hathach
fe1a297889 still have issue with initial uart rx 2018-09-21 01:27:52 +07:00
Dan Halbert
2309e60c0d WIP; problem with staticly allocated IRQ handlers 2018-09-19 21:59:04 -04:00
hathach
9c25306877 uart rx got some issue with irq 2018-09-20 02:12:21 +07:00
Scott Shawcroft
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master 
3.x master
 2018-09-19 09:58:52 -07:00
hathach
c5593ec074 got uart tx work 2018-09-19 17:59:15 +07:00
hathach
1df3bcf392 add board.UART() function 2018-09-19 14:40:37 +07:00
Dan Halbert
56b7f3ba64 fix translate omission; pca10059 fix in .travis.yml 2018-09-18 16:28:27 -04:00
Dan Halbert
bc510e714f merge 3.0.2 to master 2018-09-18 15:38:12 -04:00
hathach
d8c8c5f005 remove CFG_HWUART_FOR_SERIAL 2018-09-18 20:26:50 +07:00
Pierrick C
7e8816ad6f Add VOLTAGE_MONITOR alias to pin D31/A7 2018-09-13 23:46:47 +02:00
Dan Halbert
6a72084198 fix nrf builds; sphinx 1.8.0 crashing: use lower version 2018-09-12 18:37:03 -04:00
Dan Halbert
e335c74ac6 use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage 2018-09-09 15:01:28 -04:00
Dan Halbert
100603a60b neopixel_write merge; alphabetize stuff in Makefile 2018-09-05 17:38:59 -04:00
Dan Halbert
4c3b4cacfa Merge remote-tracking branch 'adafruit/master' into nrf-pin-claiming 2018-09-05 13:15:22 -04:00
hathach
ccd87a33b6 use nrf_pwm instead of direct registers 2018-09-05 13:18:36 +07:00
Dan Halbert
b5c03a7085 generalize # of ports; remove atmel neopixel code; remove pin name in mc_pin_obj_t 2018-09-04 16:43:21 -04:00
hathach
f4a98e909c fix nrf52832 build 2 2018-09-04 23:25:08 +07:00
hathach
b9e8e3cd1f fix nrf52832 build 2018-09-04 20:54:36 +07:00
hathach
1fe3ed87eb run background job while waiting for neopixel write seqend 2018-09-04 19:24:45 +07:00
hathach
0d92c65829 correct disconnection check to only dtr 2018-09-04 18:36:08 +07:00
hathach
3ae24d9f9a add neopixel_write implementation, work ok 2018-09-04 18:33:08 +07:00
hathach
e17253071e adding neopixel write 2018-09-04 15:51:49 +07:00
Dan Halbert
4382389e6f fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards 2018-09-01 00:29:36 -04:00
Dan Halbert
9ea809bef7 add pin claiming to devices 2018-08-31 18:38:05 -04:00
Dan Halbert
585597a252 pin files rework; implement pin claiming; add more boards 2018-08-31 18:05:55 -04:00
Dan Halbert
0e8d146184 wip 2018-08-31 18:05:55 -04:00
hathach
87811ec3a0 update readme board name feather_nrf52832 2018-08-28 16:15:20 +07:00
ladyada
ded38d30b6 rename pin.h to nrf_pin.h to avoid conflict with Pin.h 2018-08-26 20:37:12 -04:00
Dan Halbert
4cc33f8de6 Merge remote-tracking branch 'adafruit/master' into nrf_board_rename 2018-08-23 16:25:57 -04:00
Dan Halbert
728622f09d
Merge pull request #1139 from hathach/nrf52_usb_serial 
use unique DevicID for usb serial
 2018-08-23 09:30:31 -04:00
hathach
4a8cd03de1 use unique DevicID for usb serial 2018-08-23 14:00:54 +07:00
hathach
fed1960424 remove s140 6.0.0 and s132 6.1.0 (not supported yet) 2018-08-23 00:27:39 +07:00
hathach
0c0ac06fc7 add SD 6.1.0 to download all 2018-08-22 23:09:09 +07:00
hathach
7961103ee6 update SD to v6.1.0 2018-08-22 21:51:30 +07:00
Dan Halbert
05ea9fd296 remove stray underscore 2018-08-22 10:26:52 -04:00
Dan Halbert
eaf4d19dbb Merge remote-tracking branch 'adafruit/master' into nrf_board_rename 
Merge #1137
 2018-08-22 10:24:10 -04:00
hathach
a516d1123f fix typos 2018-08-22 19:42:41 +07:00
hathach
02b1b53153 Merge branch 'master' into nrf52_dfu_touch1200 2018-08-22 15:24:12 +07:00
hathach
fc955b1591 remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader 2018-08-22 15:22:17 +07:00
Dan Halbert
c503cf990b forgot to change .travis.yml 2018-08-21 20:35:58 -04:00
Dan Halbert
85df32907f rename nrf boards to feather_nrf52832 and feather_nrf52840_express 2018-08-21 18:45:37 -04:00
hathach
df4184e478 rename linker file to SD major version only 2018-08-21 16:02:57 +07:00
hathach
1c4accfa39 Merge branch 'nrf52_remove_boot_target' into nrf52_dfu_touch1200 2018-08-21 15:17:03 +07:00
hathach
b7dd33b76e add touch 1200 for dfu-flash 2018-08-21 15:15:44 +07:00
Egor Leonenko
18e9f74738
Fix PWM Support on NRF52840 
Replace usage of pin number alone with port+pin combination in NRF port of PWMOut
 2018-08-17 19:34:03 +12:00
Scott Shawcroft
76e0373576
Fix nrf and unix 2018-08-16 17:41:38 -07:00
Scott Shawcroft
2cd166b573
Fix esp and samd 2018-08-16 17:41:35 -07:00
hathach
e1ccc07841 remove bootloader & dfu-bootloader target 
user should go to bootloader repo to upgrade bootloader
 2018-08-14 20:19:28 +07:00
Dan Halbert
498fec64e2 increase new dynamic stack size to a comfortable value for now 2018-08-03 22:35:20 -04:00
Dan Halbert
dfa2581ffd
Merge pull request #1057 from tannewt/flexible_heap 
Add basic memory allocation outside Python runtime
 2018-08-02 18:43:06 -04:00
Scott Shawcroft
5704bc8c93
Share memory.c and a bit of polish. 2018-08-02 14:35:46 -07:00
hathach
0bc3432106 Merge branch 'master' into nrf52_sys_module 2018-08-01 11:53:12 +07:00
hathach
592c190069 PR review clean up 2018-08-01 11:31:32 +07:00
hathach
8640d37149 try to address sys module, compile ok 2018-08-01 10:19:20 +07:00
hathach
200669216e more clean up 2018-08-01 08:52:07 +07:00
hathach
bac233e99b clean up 2018-08-01 08:47:41 +07:00
hathach
6ddd8583da clean up 2018-08-01 08:20:20 +07:00
Scott Shawcroft
a88cdaca6a
Remove rogue execute bit. Must a common incorrect shortcut for me. :-) 2018-07-31 12:42:21 -07:00
hathach
1e524f1b98 Merge branch 'master' into nrf52840_usb_hid 2018-08-01 00:58:23 +07:00
hathach
85bd46a4e1 enable MICROPY_PY_ARRAY_SLICE_ASSIGN, MICROPY_PY_BUILTINS_SLICE_ATTRS 2018-07-31 23:09:39 +07:00
hathach
4bece22c92 add hid keyboard LED indicator stub 2018-07-31 23:02:15 +07:00
hathach
05139e2aee all hid devices seems to be ok 2018-07-31 22:54:26 +07:00
hathach
2c85f42330 add usb hid syscontrol 2018-07-31 21:57:00 +07:00
hathach
ef58adacd3 usb hid consumer control works 2018-07-31 21:19:02 +07:00
hathach
fd661c1d57 improve usb hid 2018-07-31 21:06:24 +07:00
Scott Shawcroft
12cf5e51c2
Allow for resizing the stack area. 2018-07-31 05:18:23 -07:00
hathach
27b2a9fe59 add usb_desc, disable tinyusb stack CFG_TUD_DESC_AUTO 2018-07-31 17:50:32 +07:00
hathach
d15caf0dbd hid keyboard and mouse work well 2018-07-31 16:42:04 +07:00
hathach
221d54a595 workaround to use lib/utils/interrupt_char.c 2018-07-31 14:28:34 +07:00
hathach
ae783b0b1a update tinyusb, set scsi sense key for unsupported commands 2018-07-31 13:54:58 +07:00
Dan Halbert
2e260a0eab Merge remote-tracking branch 'adafruit/master' into micropython-25ae98f-merge 2018-07-28 14:13:54 -04:00
Dan Halbert
f48b70050e merge finished 2018-07-28 13:29:47 -04:00
hathach
368d59796f adding usb_hid 
compiled with undefined ref
 2018-07-27 17:36:41 +07:00
hathach
21339c4155 house keeping 2018-07-27 17:22:21 +07:00
hathach
e86f7d0b88 add usb msc callback description 2018-07-27 00:17:14 +07:00
hathach
5bdf40901f update tusb lib 2018-07-26 17:16:41 +07:00
Dan Halbert
bc760dd341 WIP: complete manual inspection of all significant changes 2018-07-23 21:34:25 -04:00
hathach
bb28faf39c arturo182 review 2018-07-17 23:57:49 +07:00
hathach
a0b9871ba9 use seperate interrupt_char.c for nrf 
move usb descriptors into usb.c
 2018-07-17 21:52:20 +07:00
hathach
d4e84a9bd4 Merge branch 'master' into fix_nrf52840_serial 2018-07-17 21:27:16 +07:00
hathach
3525d65af3 should fix #1021 
- update tinyusb for wanted char
- move usb code into usb.c
 2018-07-17 21:24:49 +07:00
Dan Halbert
a20ab40ed2 Merge 3.0.0 final bugfixes and changes to master 2018-07-16 09:01:46 -04:00
Dan Halbert
bfe14ff824
Merge pull request #1014 from arturo182/nrf_shared_ble 
nrf: Split the ble module into a shared part and the port implementation
 2018-07-13 10:23:37 -04:00
Dan Halbert
414267388d
Merge pull request #1023 from arturo182/nrf_pyocd 
nrf: Fix flashing with pyocd
 2018-07-13 10:02:20 -04:00
arturo182
05c1384b67 nrf: Split the ble module into a shared part and the port implementation 
This allows other ports to implement these shared bindings.
 2018-07-13 16:01:15 +02:00
arturo182
883ca21321 nrf: Fix flashing with pyocd 2018-07-13 15:22:46 +02:00
arturo182
9729fc3d31 nrf: Fix BLE on nRF52840 after adding the USB functionality 2018-07-13 14:55:02 +02:00
hathach
f98c7f708e merge review 2018-07-12 01:37:23 +07:00
hathach
10846d316b Merge branch 'master' into nrf52840_usbboot 2018-07-11 21:35:44 +07:00
Dan Halbert
4962468fff
Merge pull request #1011 from arturo182/nrf_cleanup 
nrf: More cleanup and porting
 2018-07-10 15:44:30 -04:00
hathach
a53b1c7cf1 code format 2018-07-10 22:49:51 +07:00
arturo182
eab00ff140 nrf: Remove even more unused files 2018-07-10 14:59:22 +02:00
arturo182
2c63fb2a94 nrf: Remove the random hal and module 
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
 2018-07-10 14:59:22 +02:00
arturo182
1163462635 nrf: Remove the old time hal and replace with nRFx 2018-07-10 14:59:10 +02:00
Scott Shawcroft
e875f4e52e
Merge pull request #1002 from arturo182/nrfx_gpio 
nrf: Rewrite the DigitalInOut hal using nRFx
 2018-07-09 17:54:38 -07:00
hathach
0e819599e7 Merge branch 'master' into nrf52840_usbboot 2018-07-10 02:02:52 +07:00
hathach
7715d19efe update bootloader hex 2018-07-10 01:20:37 +07:00
hathach
97a1ae911e add family option for uf2 2018-07-10 01:18:14 +07:00
hathach
f199e87085 add ARRAY_SIZE 
which is missing when building with debug mode
 2018-07-10 01:06:57 +07:00
hathach
c5089d7274 generate uf2 by default 
update tusb
 2018-07-10 01:02:33 +07:00
Dan Halbert
64b9ee9c74
Merge pull request #985 from tannewt/heap_tweaks3 
A few heap related tweaks
 2018-07-08 23:21:38 -04:00
Scott Shawcroft
a45659c59a
Merge pull request #1000 from arturo182/nrfx_uart 
nrf: Rewrite the UART HAL using nRFx
 2018-07-08 20:17:47 -07:00
Scott Shawcroft
133b99b6f2
Merge pull request #999 from arturo182/nrf_mphalport 
nrf: mphalport cleanup
 2018-07-08 20:13:21 -07:00
Scott Shawcroft
fd5634e4aa
Merge pull request #992 from arturo182/nrf_i2c_fix 
nrf: Fix I2C transfers with data larger than HW allows
 2018-07-08 20:12:09 -07:00
arturo182
388f554ff6 nrf: Rewrite the DigitalInOut hal using nRFx 2018-07-08 17:48:32 +02:00
arturo182
25ece8fb3d nrf: Rewrite the UART HAL using nrfx 2018-07-08 16:42:04 +02:00
arturo182
c6a2a55bc9 nrf: Cleanup mpconfigboard files 
All the removed defines were used by legacy modules that are now
removed.
 2018-07-08 15:18:11 +02:00
arturo182
887486582e nrf: Remove port-specific help 
It contains mentions to the pyb module which was removed.
The ble-specific help will be re-added later when the API
is stabilized.
 2018-07-08 15:18:11 +02:00
arturo182
1ea633c484 nrf: mphalport cleanup 2018-07-08 14:39:30 +02:00
arturo182
da27253693 nrf: Fix I2C transfers with data larger than HW allows 2018-07-06 21:12:24 +02:00
arturo182
ac74edb4e4 nrf: Fix SPI transfers with data larger than HW allows 2018-07-06 21:10:25 +02:00
hathach
baf68a936e remove hal_time files 2018-07-06 15:59:20 +07:00
hathach
3e319694aa mp_hal_delay_ms() to call background task 
remove hal_time.c
 2018-07-06 15:48:01 +07:00
hathach
948ddf8463 make SD default to s140 and s132 for nrf52840 and nrf52832 
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
 2018-07-06 14:39:49 +07:00
hathach
6ef3a0b181 implement filesystem_writable_by_python() 2018-07-06 13:01:07 +07:00
hathach
0806c0a38b update fatfs cached sector when running write10 2018-07-05 17:43:38 +07:00
hathach
4e5d9a029d clean up 2018-07-05 17:26:07 +07:00
hathach
0365912e28 implement msc with internal_flash api 
Note: only work with SD is disabled.
 2018-07-05 16:19:04 +07:00
hathach
3564e98181 implement msc flash, seems to work 2018-07-05 15:22:23 +07:00
hathach
1745e20391 replace jlink with native usb cdc for serial REPL 2018-07-05 11:30:12 +07:00
hathach
be2ff20e42 enable usb cdc interface 
not handle anything yet.
 2018-07-04 17:15:49 +07:00
hathach
7fff7f5e70 add usb msc support for nrf52840 2018-07-04 16:40:53 +07:00
Scott Shawcroft
8fb976f0bd
Split out assembly source files. 2018-07-03 07:25:54 -07:00
Scott Shawcroft
dbc977485c
Support gathering register values on nrf. 2018-07-03 06:31:07 -07:00
hathach
46c453cf0a add tinyusb as submodule 2018-07-03 17:46:08 +07:00
hathach
b14b28067e Merge branch 'master' into nrf52840_usbboot 2018-07-03 17:29:28 +07:00
Scott Shawcroft
b91202969a
Merge pull request #982 from arturo182/nrf_makefile 
nrf: Save some flash bytes by using extra compile flags
 2018-07-02 14:33:47 -07:00
Scott Shawcroft
05a088b369
Merge pull request #972 from arturo182/nrf_i2c 
nrf: Rewrite the I2C common-hal using nrfx
 2018-07-02 14:33:06 -07:00
arturo182
da491ec961 nrf: Save some flash bytes by using extra compile flags 
Both of these are used in the atsamd port as well.
 2018-07-02 22:00:04 +02:00
Dan Halbert
7c9a0e2996 remove unnecessary extern in nrf/mphalport.c 2018-06-29 16:06:51 -04:00
Dan Halbert
2a0b857643 implement mp_hal_delay_us() to not need interrupts, and use it 2018-06-29 16:01:46 -04:00
Dan Halbert
b4fd77bb7c fix nrf and esp8266 builds for OneWire fix 2018-06-29 00:00:05 -04:00
Dan Halbert
52a11547cb fix OneWire timing and DigitalInOut.switch_to_input() 2018-06-28 23:32:20 -04:00
Scott Shawcroft
429168d4ac
Merge pull request #970 from arturo182/nrf_softdev 
nrf: Remove unsupported softdevice defines
 2018-06-28 14:01:19 -07:00
Scott Shawcroft
007155276a
Merge pull request #969 from arturo182/nrf_more_commonhal 
nrf: Rewrite more common-hal with nrfx and sync with atsamd port
 2018-06-28 14:00:45 -07:00
Scott Shawcroft
039b4dc00a
Merge pull request #968 from arturo182/nrf_qstr 
nrf: Remove old qstr defines
 2018-06-28 13:57:46 -07:00
Scott Shawcroft
ae82a93b56
Merge pull request #967 from arturo182/nrf_os 
nrf: Rewrite the os common-hal using nrfx
 2018-06-28 13:55:34 -07:00
arturo182
178c089045 nrf: Rewrite the I2C common-hal using nrfx 2018-06-28 22:45:02 +02:00
arturo182
6e6a500801 nrf: Rewrite the os common-hal using nrfx 2018-06-27 21:01:07 +02:00
arturo182
af5cb9c492 nrf: Remove unneeded hal files 2018-06-27 21:00:34 +02:00
arturo182
b87bba8a28 nrf: Rewrite more common-hal with nrfx and sync with atsamd port 2018-06-27 20:55:29 +02:00
arturo182
1fa8fac5d7 nrf: Remove old qstr defines 
These were used by the microbit music module, which was removed.
 2018-06-27 20:52:13 +02:00
arturo182
b9f02ca3c5 nrf: Remove unsupported softdevice defines 2018-06-27 20:48:57 +02:00
arturo182
2a12fcd18b nrf: Rewrite the AnalogIn common-hal using nrfx 2018-06-27 20:41:30 +02:00
hathach
c4f11dfd32 flash target update bootloader setting to skip crc checksum 2018-06-27 15:22:44 +07:00
hathach
8fbe1d73e9 clean up makefile 2018-06-27 15:13:20 +07:00
hathach
4920cc47ca move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it 2018-06-27 14:31:08 +07:00
hathach
bed7310fd7 update bin files 2018-06-27 14:13:18 +07:00
hathach
ecd3993d43 update pin map for feather52840 2018-06-27 14:06:15 +07:00
Scott Shawcroft
91427b0b23
Merge pull request #959 from arturo182/nrf_spim 
nrf: Rewrite the SPI common-hal using nrfx
 2018-06-26 11:00:12 -07:00
Scott Shawcroft
d7d132d5a3
Merge pull request #960 from arturo182/nrf_stm_cleanup 
nrf: Remove leftovers from stm32 code copy
 2018-06-26 10:52:04 -07:00
arturo182
16973d0559 nrf: Remove unused hal files 
Makes it easier to keep track of what's left to rewrite.
 2018-06-26 00:13:41 +02:00
arturo182
2f1e678d60 nrf: Rewrite the SPI common-hal using nrfx 
Use SPIM2 on nRF52832 and SPIM3 on nRF52840. SPIM3 is able to go
up to 32MHz!
 2018-06-25 23:46:34 +02:00
arturo182
b14d13e318 nrf: Remove leftovers from stm32 code copy 2018-06-25 23:38:10 +02:00
hathach
8d065fe0e6 update reamde 2018-06-26 00:16:58 +07:00
hathach
54547683f9 add uf2, bootloader target 2018-06-25 23:31:14 +07:00
hathach
4722371be9 update bootloader hex with uf2 2018-06-25 23:27:00 +07:00
hathach
f5be5ed6ee Merge branch 'master' into nrf52840_usbboot 2018-06-25 17:12:24 +07:00
arturo182
596a1d8843 nrf: Rename feather52 to feather52832 in readme files 2018-06-22 10:04:39 +02:00
arturo182
25e71a56d4 nrf: Update the PCA10056 example to use new pin naming 2018-06-20 23:39:36 +02:00