f40504b7bc
enable MP3
2023-03-22 12:16:29 -05:00
04bb0513df
enable audiomixer
2023-03-22 12:16:26 -05:00
c6bc9c48c9
mimxrt10xx: implement i2sout
...
tested on metro m7 (green prototype version) with max98357a i2s amplifier and the following test code:
```py
import board
import time
import digitalio
from audiobusio import I2SOut
from audiocore import RawSample
from microcontroller import pin
from ulab import numpy as np
n = np.array(np.sin(np.linspace(0, np.pi*2, 218, endpoint=False)) * 200, dtype=np.int16)
print(n)
r = RawSample(n, sample_rate=8000, channel_count=2)
def main():
with digitalio.DigitalInOut(board.LED) as l:
l.switch_to_output(True)
value = False
while True:
with I2SOut(pin.GPIO_06, pin.GPIO_07, pin.GPIO_04) as i:
time.sleep(.01)
l.value = value = not value
i.play(r, loop=True)
print(i.playing)
time.sleep(.5)
i.stop()
print("STOPPED")
print(i.playing)
time.sleep(.5)
i.play(r, loop=True)
print(i.playing)
print("PLAY AGAIN")
time.sleep(.5)
time.sleep(1)
```
Only stereo, 16-bit, raw samples were tested; the sample rate is actually fixed
at 48kHz in the core right now. There is more to do, but the basics work.
# Conflicts:
# ports/mimxrt10xx/Makefile
# ports/mimxrt10xx/mpconfigport.mk
2023-03-22 12:15:25 -05:00
45257147dc
Merge pull request #7772 from jepler/fix-struct-pack
...
struct: Check that argument counts match, similar to cpython3
2023-03-22 13:11:34 -04:00
1e1172bc24
fix sorting of block
2023-03-22 12:04:34 -05:00
08358ecd50
constify spi, i2c, uart bank data
2023-03-22 12:03:20 -05:00
e1f16472c1
Merge pull request #7766 from tannewt/switch_nxp_sdk
...
Switch iMX RT sdk to NXP repo
2023-03-22 09:57:12 -07:00
349dedca54
struct: Check that argument counts match, similar to cpython3
...
.. and test our struct module during the build-time tests
Closes #7771
2023-03-22 09:35:09 -05:00
c93560144b
Merge pull request #7678 from FoamyGuy/boundary_fill_background_tasks
...
do background tasks and handle interrupt during boundary fill
2023-03-21 23:38:05 -04:00
9c3c0555dd
Switch iMX RT sdk to NXP repo
...
Fixes #7645
2023-03-21 16:21:57 -07:00
67e0a49a1f
Merge pull request #7724 from tannewt/get_perfbench_running
...
Improve iMX RT performance
2023-03-21 09:00:48 -07:00
b45d128726
fix lwip name in 01space_lcd042_esp32c3
2023-03-21 16:46:08 +01:00
36e4dc2588
Adding 01space OLED 0.42 C3
2023-03-21 05:01:17 +01:00
41a8ada327
Merge pull request #7750 from Neradoc/add-ttgo-tdisplay-esp32
...
Add Lilygo TTGO T-display ESP32 board
2023-03-20 14:40:16 -07:00
32a596df39
Merge pull request #7757 from adafruit/8.0.x
...
Merge latest 8.0.x changes
2023-03-20 14:34:59 -07:00
b75d99c5d7
Merge pull request #7745 from Neradoc/lilygo-twatch-v3-MAIN
...
Add Lilygo T-Watch 2020 V3 (ESP32)
2023-03-20 14:31:32 -07:00
bdf592089a
Fix .bin, .hex and .uf2 with new linker sections
...
Also, format perfbench output in table with reference timing from
the host.
2023-03-20 14:02:57 -07:00
3ac696e7ba
Merge pull request #7731 from kreasteve/statemachine_run_fix
...
Statemachine run fix
2023-03-19 20:47:09 -05:00
b88e76d3a4
Add builtin display support with shared board.I2C to Lolin S2 Pico
2023-03-19 17:48:36 +01:00
fecc1bdedb
fix typos (partial) detected by codepell
2023-03-18 22:17:02 +07:00
e7c349ea43
Add Lilygo TTGO T-display ESP32 board
2023-03-18 15:27:59 +01:00
f1b7612b5a
Add Lilygo T-Watch 2020 V3 (ESP32)
...
- DISPLAY is in, brightness is ok
- default busses and pin names
- enabled PSRAM
2023-03-18 01:17:46 +01:00
ca292f3427
Turn off mkfs FAT32 on all SAMD21 builds; note in doc
2023-03-17 12:18:24 -04:00
f35af4c9ce
Update mpconfigboard.mk
...
Added trailing line
2023-03-16 16:54:55 -05:00
d59a57ecc9
Update pins.c
...
Changed GIO00 to GIO0
2023-03-16 16:54:38 -05:00
eab8633a9e
Updated Fig Pi Pins and Added Memory Option
...
Updated the Fig Pi pin definition to match latest production and fix errors. Added an optional memory chip for parts shortage issues.
2023-03-16 16:41:49 -05:00
208c081c95
bugfix_#7706
2023-03-16 11:10:57 +01:00
d7fb21ec76
Revert "bugfix"
...
This reverts commit 4f1627f68e
2023-03-16 11:02:41 +01:00
4f1627f68e
bugfix
2023-03-16 10:56:22 +01:00
37b9f778e1
Merge pull request #7237 from kdb424/main
...
Add Boardsource Blok
2023-03-16 00:02:10 +05:30
6062e75b08
add Blok
2023-03-15 08:58:53 -07:00
f2931dec7a
empty RUN_BACKGROUND_TASKS for unix port
2023-03-14 18:26:23 -05:00
5bb8a7a7c6
Improve iMX RT performance
...
* Enable dcache for OCRAM where the VM heap lives.
* Add CIRCUITPY_SWO_TRACE for pushing program counters out over the
SWO pin via the ITM module in the CPU. Exempt some functions from
instrumentation to reduce traffic and allow inlining.
* Place more functions in ITCM to handle errors using code in RAM-only
and speed up CP.
* Use SET and CLEAR registers for digitalio. The SDK does read, mask
and write.
* Switch to 2MiB reserved for CircuitPython code. Up from 1MiB.
* Run USB interrupts during flash erase and write.
* Allow storage writes from CP if the USB drive is disabled.
* Get perf bench tests running on CircuitPython and increase timeouts
so it works when instrumentation is active.
2023-03-14 12:30:58 -07:00
d4840cbf10
translate() messages must be one string
2023-03-14 13:13:58 -04:00
9083ae02de
Merge pull request #7710 from PaintYourDragon/pb-feather-dvi
...
Add Feather RP2040 DVI
2023-03-14 13:10:47 -04:00
141a43cdce
Merge pull request #7702 from dhalbert/tinyusb-update
...
update tinyusb to latest
2023-03-14 09:59:45 -07:00
b432cf6201
fix rp2040 with new shared irq usb handler
2023-03-13 22:46:27 +07:00
f5b8b8d6f2
tailing whitespace removed (pre-commit run failed)
2023-03-13 15:30:52 +07:00
49e9ea2e9a
add missing pins 4, 36 and 39 - and 4 aliases
...
The original list left D4 (GPIO4), VN (GPIO39) and VP (GPIO36) out.
Added aliases for 1, 3, 16 and 17 with their GPIO names, even though they won't be used as such since they are UART0 and UART2
2023-03-13 15:17:55 +07:00
daa927a114
switch STM to dwc2 USB
2023-03-12 14:02:38 -04:00
7163ab390c
Merge pull request #7715 from bill88t/waveshare_esp32s2_pico
...
Even more board definition improvements for `waveshare_esp32s2_pico`
2023-03-12 07:46:42 +05:30
bfc551c158
Invert led
2023-03-11 14:14:47 +02:00
76e83a432c
Debug uart, default spi/i2c
2023-03-11 14:05:45 +02:00
5f0aa4a608
change board config of some esp32s3 boards
...
- remove unnecessary optimization flags
- shrink adafruit_feather_esp32s3_reverse_tft
2023-03-11 08:53:44 +05:30
ff0a17d095
Merge branch 'adafruit:main' into main
2023-03-10 13:45:53 -08:00
b6a7613350
Merge pull request #7470 from microdev1/espnow
...
Add ESP-NOW Support
2023-03-10 12:21:56 -05:00
838450643e
Merge branch 'adafruit:main' into main
2023-03-10 09:50:27 -05:00
0f31ba676b
update errata fixes for RP2040
2023-03-09 17:40:53 -05:00
353411af4b
Merge pull request #7701 from dhalbert/background-task-for-7673
...
run background tasks during multi-part DMA
2023-03-09 17:25:42 -05:00
58f28b98be
minor doc fix
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-03-10 00:01:44 +05:30
fe40035cb9
Merge pull request #7697 from dhalbert/pico-sdk-cyw43-update
...
pico-sdk to 1.5.0; cyw43-driver to 0.9.0
2023-03-09 10:02:45 -08:00
fcc4299b92
Merge pull request #7686 from gamblor21/esp_family_spi_speed_increase
...
ESP32 Family: Add multiple transctions to SPI for improved efficency
2023-03-09 10:01:02 -08:00
96e2a72d71
run background tasks during multi-part DMA
2023-03-09 11:53:16 -05:00
2ebc0ea51c
GitHub online editor introduced spaces on blank lines :(
2023-03-09 11:30:38 -05:00
de3c5ad2f4
add blank lines around aliased pins
2023-03-09 11:00:55 -05:00
0054362784
Updated Pin Assignments (Add SPI definition)
...
Changed incorrect i2C pins assignment in mpconfigboard.h (changed SDA/SCL to GPIO 8/GPIO 9.
Rename SD_MOSI, SD_MISO and SD_SCK to MOSI, MISO and SCK
Added SPI define in mpconfigboard.h for SPI
2023-03-09 10:26:54 -05:00
874ba4ec68
revert `Communicate` class and more
2023-03-09 12:04:50 +05:30
fef9571400
pico-sdk to 1.5.0; cyw43-driver to 0.9.0
2023-03-08 22:43:12 -05:00
ab70506178
Move background tasks to slower routine
2023-03-08 16:14:58 -06:00
6da2ca6770
Update pins.c
...
Added a comma (,) to the the end of the definition for board_spi_obj
2023-03-08 16:46:31 -05:00
1200fe405f
Change GPIO pins for SDA and SCL
...
Chnage the SDA pin define to GPIO9 and SCL pin define to GPIO8. This now matches the currect GPIO pins numbers in pins.c
The previous GPIO pins number in mpconfigboard.h were incorrect
2023-03-08 16:38:16 -05:00
c133e79a08
Updated mpconfigboard.h
...
Add #defines for SPI_BUS_SCK, SPI_BUS_MOSI and SPI_BUS.MISO
2023-03-08 16:31:47 -05:00
7f8a3052be
Updated Pins.c definitions for SPI and I2C
...
Removed "CD" from the pin definitions for (MISO, MOSI and SCK pins). Specifically Pins 13, 15 and 14. Added Pin definitions for I2C and SPI objects
2023-03-08 16:25:18 -05:00
fa55669da5
Merge branch 'main' of https://github.com/PaintYourDragon/circuitpython
2023-03-08 12:55:23 -08:00
a2514ca304
Add board adafruit_feather_rp2040_dvi
...
Based on Feather RP2040 SCORPIO, but new USB PID (from MBAdafruitBoards/Production) and pin name changes for GP16-23 (CKN/CKP etc., from board schematic).
2023-03-08 11:37:51 -08:00
35e82a5f5e
Merge pull request #7676 from microdev1/ci
...
CI: Enhancements & Refactoring
2023-03-08 10:36:05 -08:00
7f5f93126c
Move background task check
2023-03-06 16:26:22 -06:00
dd05118645
Add multiple transctions to SPI
2023-03-05 22:59:10 -06:00
bd889926e5
Merge pull request #7679 from dhalbert/socket-fix
...
be more careful when setting socket to non-blocking
2023-03-04 16:07:02 -05:00
08c9eb9f00
be more careful when setting socket to non-blocking
2023-03-04 14:40:06 -05:00
4e169bb956
Merge pull request #7673 from gamblor21/atmel-spi-tx-len-fix
...
Fix for long length SPI writes on ATMEL
2023-03-04 09:21:27 -06:00
b17364a447
conditionally build all languages
2023-03-04 15:08:54 +05:30
8a10069995
Merge pull request #7674 from jepler/m7-bootloader-reset
...
use right DBL_TAP_REG when resetting to bootloader
2023-03-03 13:44:22 -08:00
b2a08e2cce
use right DBL_TAP_REG when resetting to bootloader
...
This helps my development scripts work better, and probably also fixes
a problem switching from the circuitpython environment back to arduino.
(specifically, the "1200 baud" serial trick was not rebooting into
the bootloader but was just resetting)
2023-03-03 10:09:31 -06:00
6987d3d752
Fix for long length writes
2023-03-02 21:55:21 -06:00
e2c6cf5929
fix: Increases drive strength of 32kHz external crystal, in line with calculations specified in ST AN2867 sections 3.3, 3.4, and STM32L4 datasheet DS12023 Table 58. LSE oscillator characteristics.
...
The drive strength RCC_LSEDRIVE_LOW is marginal for the 32kHz crystal oscillator stability, and RCC_LSEDRIVE_MEDIUMLOW meets the calculated drive strength with a small margin for parasitic capacitance.
2023-02-28 14:34:10 -08:00
859a48723f
Merge pull request #7633 from tannewt/fix_imx_pwm
...
Fix `pwmio` on iMX RT.
2023-02-28 14:11:06 -05:00
8e4626ffba
Merge pull request #7559 from startup-potech/main
...
Request to add a COSMO-Pico board
2023-02-28 09:49:31 -08:00
482ba05958
Merge pull request #7658 from titimoby/8.0.x.add_Lilygo_tembed
...
add support Lilygo T-embed esp32s3 board
2023-02-28 09:45:21 -08:00
c6d38e4ba8
add support Lilygo T-embed esp32s3 board
2023-02-28 14:02:21 +00:00
f22f2a3662
enable bus device on hallowing M0
2023-02-27 18:44:08 +01:00
26bab620f7
Merge pull request #7626 from bill88t/wspico-psram-speedup
...
Waveshare ESP32-S2 Pico psram definition improvements
2023-02-25 16:15:24 +05:30
f9831b3bbc
Merge pull request #7639 from adafruit/8.0.x
...
Merge 8.0.x up to main
2023-02-24 19:32:09 -05:00
8c714ec864
Merge pull request #7497 from tannewt/banglejs2
...
Add Bangle.js 2, JDI memory displays and ACeP epd
2023-02-24 18:20:06 -05:00
adf5b7a23c
Merge pull request #7602 from milindmovasha/espressif-analogbufio
...
Espressif analogbufio implementation
2023-02-24 13:09:27 -08:00
144aed40e3
Rename flag. Turn on UTF-8 and flag on unix
...
Also added label portion to the test.
2023-02-24 12:23:59 -08:00
f832386cda
Merge remote-tracking branch 'adafruit/main' into banglejs2
2023-02-23 14:43:38 -08:00
b79661d631
Alphabetize, fix typo and remove incorrect comment
2023-02-23 14:34:54 -08:00
8996fda049
"an array" -> "array"
2023-02-23 13:55:52 -05:00
9058beb573
"a array" to "an array"
2023-02-23 13:41:49 -05:00
d5e936ce7b
Merge pull request #7628 from RetiredWizard/broadcomspi
...
Port/Broadcom Switch to "unmeasured" core clock speed check
2023-02-23 09:53:38 -08:00
9e73e8351a
Calling stop_dma function while retruning errors from start_dma after configuring dma
2023-02-23 14:47:05 +05:30
09f84e3513
Changed the code structure to start and stop dma from readinto function as per review comment to support one shot conversion mode for analogbufio
...
Added check for verifying the buffer type passed to readinto is H
2023-02-23 13:32:48 +05:30
ea8dd95931
Update common-hal routines with new params
2023-02-22 23:04:41 -05:00
08ac95a2eb
Added updated submodule back
2023-02-22 23:03:53 -05:00
7cfc689f72
Removed peripherals submodule
2023-02-22 22:59:55 -05:00
c8dd0369a4
Added broadcom-peripherals back in
2023-02-22 20:12:39 -05:00
9cc27be0bf
Removed broadcom-peripherals
2023-02-22 20:00:53 -05:00
460dda0426
Merge pull request #7616 from dhalbert/8.0.x-fix-atmel-uart
...
Fix pad assignments on atmel-samd UART
2023-02-22 17:24:29 -05:00
1acf65ee22
Fix `pwmio` on iMX RT.
...
It now handles deinit, never_reset and sharing tracking. PWM
now runs in the WAIT state as well during a time.sleep().
_reset_ok() was removed because it was called in one spot right
before deinit().
Some PWMOut were also switched to a bitmap for use instead of
reference count. That way init and deinit are idempotent.
Fixes #6589 . Fixes #4841 . Fixes #4541 .
2023-02-22 11:22:39 -08:00
1461e9448d
Merge branch 'adafruit:main' into wspico-psram-speedup
2023-02-22 20:30:54 +02:00
c2c7b9345e
Merge pull request #7625 from ftab/ftab-lyrat
...
Add ESP32-LyraT board
2023-02-22 10:27:40 -08:00
b67c0b7949
Merge pull request #7585 from bill88t/settings-toml-pystack
...
Settings.toml-configurable pystack
2023-02-22 10:13:31 -08:00
c73f008688
Make vcmailbox call change for AUX SPI instances
2023-02-22 11:58:13 -05:00
de9233f84a
raspberrypi: SSLSocket: raise OSError when appropriate
...
Rather than returning the negative error value.
This is intended to close #7606 , though I did not test with mqtt.
Instead, I created a simple standalone test program:
```python
import wifi, socketpool, ssl, time
#wifi.radio.connect(<omitted>)
import socketpool
socket = socketpool.SocketPool(wifi.radio)
ctx = ssl.create_default_context()
b = bytearray(8)
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
sss = ctx.wrap_socket(s, server_hostname='example.com')
sss.connect(('example.com', 443))
sss.setblocking(False)
r = sss.recv_into(b)
print(r, b) # prints 4294967285 which is -11 as unsigned
sss.close()
```
Before the change, r was the out of range value 4294967285. After the
change, the recv_into call raises OSError instead.
This is comparable to the behavior on standard Python, though an
SSLWantReadError is raised instead.
The original (mis)behavior seems to match what was uncovered deep inside
minimqtt by adding logging:
```
370.578: DEBUG - PKT: _sock_exact_recv: recv_len = 4294967285
```
2023-02-22 10:07:48 -06:00
d1f5004121
Add ESP32-LyraT board
2023-02-22 10:54:44 -05:00
1d12014ec7
disable pixelmap
2023-02-22 13:31:15 +02:00
7c717a54f3
Switch to "unmeasured" core clock speed check
2023-02-21 22:10:36 -05:00
1ea118684c
120M qspi
2023-02-22 00:49:55 +02:00
c7d9eecfd6
Merge pull request #7623 from DavePutz/issue_7606
...
Correctly raise OS error in socketpool_socket_recv_into()
2023-02-21 16:17:30 -05:00
de5f58a61d
Merge branch 'main' into banglejs2
2023-02-21 12:04:28 -08:00
a8b34bd067
Merge pull request #7549 from gamblor21/gif_displayio_support
...
Animated GIF support
2023-02-21 11:39:29 -08:00
7e6e824d56
Correctly raise OS error in socketpool_socket_recv_into()
2023-02-21 13:38:29 -06:00
650c4c5d92
pystack+ rainbow-
2023-02-21 20:50:07 +02:00
5dba32ed07
Try to pass ci with rainbowio
2023-02-21 17:42:08 +02:00
b0384b5721
Merge branch 'adafruit:main' into settings-toml-pystack
2023-02-21 13:35:19 +02:00
8ffa7b1d55
Add Adafruit HUZZAH32 breakout
2023-02-20 20:04:22 -05:00
2684aeb838
don't check for RX and TX both none in ports: now checked in shared-bindings
2023-02-20 19:11:16 -05:00
6d51356324
Fix pad assignments on atmel-samd UART
2023-02-19 20:42:44 -05:00
f1b6deacda
Yet another formatting change related to whitespaces
2023-02-18 14:49:11 +05:30
b2c6fad713
Additional formatting change related to whitespaces
2023-02-18 14:45:37 +05:30
4683e48337
Further formatting changes related to whitespaces
2023-02-18 14:40:12 +05:30
ead5751803
Pre-commit: Done the formatting changes
...
Pre-commit: Fixed compilation error for other ESP32C3/ESP32S3/ESP32H2 boards
Review comment: Removed the self->pin NULL check
Review comment: Using raise_ValueError_invalid_pin when adc_index is not ADC_UNIT1 for ESP32
Review comment: Optimized the code to set data in buffer from DMA results
Fix: For ESP32C3 boards continuing collecting samples after channel mismatch as DMA runs in alternating UNIT mode
Fix: For ESP32S3 and ESP32H2 setting conversion mode to type2
2023-02-18 14:26:50 +05:30
508f2015b6
Merge pull request #7605 from Neradoc/pico-uart-in-use-error
...
Tweak the UART in use message on RP2040
2023-02-18 08:35:52 +05:30
13716c9c30
tweak the UART in use message on RP2040
2023-02-17 23:29:44 +01:00
58532ece3f
Moved CIRCUITPY_ANALOGBUFIO flag to correct place in alphabetical order
2023-02-17 23:50:41 +05:30
f71b418a7d
Merge branch 'adafruit:main' into settings-toml-pystack
2023-02-17 16:58:03 +02:00
8a4a408707
Disable settable-pystack too to make more space
2023-02-17 16:35:16 +02:00
5635077853
Espressif analogbufio implementation
2023-02-17 19:19:15 +05:30
388279d9c1
Disable rainbowio instead.
2023-02-17 15:24:27 +02:00
17e2598fa1
Revert "settable pystack = 0 for kicksat-sprite"
...
This reverts commit f05c730a01
2023-02-17 15:23:01 +02:00
a2c22521b4
Updates to waveshare-esp32s2-pico board definition
2023-02-17 15:16:18 +02:00
f05c730a01
settable pystack = 0 for kicksat-sprite
2023-02-17 15:14:09 +02:00
bbadc00599
Merge pull request #7577 from dhalbert/safemode-py
...
Implement safemode.py
2023-02-16 14:15:20 -05:00
fd1c3ca784
Increase number of LWIP timers for MDNS
2023-02-15 16:40:45 -08:00
931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
...
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
that safe mode messages show up on the display.
ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.
For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
converted colors at each index.
* ColorConverter now caches the last converted color. It should make
conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
f79459cb70
Try -fweb -frename-registers to make more SAMD21 builds fit
2023-02-15 16:38:24 -05:00
fe40181144
Turn back on for pewpew_m4, turn off terminalio for incomplete fonts in pewpew_m4
2023-02-15 14:45:15 -05:00
32d86c3ea3
Merge pull request #7580 from adafruit/8.0.x
...
Merge 8.0.x up to main
2023-02-15 09:16:51 +05:30
48077daa7f
Merge pull request #7581 from gneverov/issue_7333
...
Add function common_hal_busio_uart_never_reset for rp2
2023-02-15 09:16:25 +05:30
0be53977f9
Merge pull request #7570 from RetiredWizard/broadcomNeopix
...
Broadcom pi zero2w neopixel misbehaving/crash fix
2023-02-14 09:56:18 -08:00
98b61279e4
Add function common_hal_busio_uart_never_reset for rp2
2023-02-14 09:05:24 -08:00
0f099cdb31
Turn off safemode.py for pewpew_m4
2023-02-13 22:52:39 -05:00
c39a51527f
Turn safemode.py off on non-external-flash SAMD21 builds
2023-02-13 21:48:03 -05:00
6ebb911a4d
pre-commit formatting fix
2023-02-13 21:06:47 -05:00
09ccf2988d
Replace bitwise or with boolean or
2023-02-13 21:04:11 -05:00
39d3d97ea4
Remove unnecessary memory barriers
2023-02-13 19:46:35 -05:00
fa435468fa
Merge branch 'main' into gif_displayio_support
2023-02-13 18:30:51 -06:00
d8231f1588
Implement safemode.py
2023-02-13 18:26:38 -05:00
be67cb72ad
Disable for pewpew_m4 for space
2023-02-13 17:04:54 -06:00
dcb6955fa5
use boolean and symbols
2023-02-13 14:58:37 -05:00
791aefd388
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:54 -05:00
575f177dd0
Update ports/broadcom/common-hal/neopixel_write/__init__.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2023-02-13 14:44:46 -05:00
7d236f2782
Merge pull request #7547 from ajs256/add_sprig
...
Add new board hack_club_sprig
2023-02-13 10:25:04 -08:00
676cbb308d
minor update to boards.c to fix mismatched number of LEDs causing LEDs not to be reset
2023-02-13 09:52:18 -06:00
5c2bd38684
Removed gifio module from tests
2023-02-13 09:40:16 -06:00
ec90d79d61
Merge pull request #7553 from kamtom480/sdk2.6.0
...
spresense: update SDK to 2.6.0
2023-02-13 09:04:35 -05:00
1679790481
Tweaked to run without delays on zero w
2023-02-11 20:21:25 -05:00
359a27e166
Pre-commit is stubborn
2023-02-11 12:19:21 -05:00
2104708c58
missed a trailing space
2023-02-11 12:17:55 -05:00
f29cd4a836
Pre-commit fix trim trailing whitespace
2023-02-11 12:13:34 -05:00
a462a316bd
Fix pre-commit formatting
2023-02-11 12:10:03 -05:00
a2bbca1428
Broadcom Raspberry Pi Zero2W neopixel timing fix
...
These changes result in working neopixel functionality. I've tested on
both the zero2w and the pi4b (The 4b didn't exhibit the original issue)
and the boards now behave properly with 1 to 30 pixels and the board hanging
no longer occurs.
Remove mod that didn't help during testing
Restoring back to original structure
Replace 2 microsecond delay w/deterministic loop
Remove unneded check for empty queue
Put transmit delay outside loop so Queue is used
Make sure last transmission is complete
2023-02-11 11:38:11 -05:00
e125370cd4
first commit
2023-02-09 01:59:59 +00:00
b9f689adf4
Use lowest drive level for PIO
2023-02-08 16:18:58 -06:00
e78143a2f5
fix copyright header
2023-02-05 11:18:23 -08:00
6c54bc9fd9
more espnow changes
...
- improve docs
- use existing list methods
- change `recv` to `read`
2023-02-05 12:31:08 +05:30
c0a9c71057
replace `ESPNowStats` with `Communicate` class and more
2023-02-05 01:42:32 +05:30
07e8506b79
Add board hack_club_sprig
2023-02-03 20:19:11 -08:00
b03eed32fb
espressif: i2sout: wait a short time to succesfully write data
2023-02-03 14:22:03 -06:00
41dff5d8cc
espressif: i2sout: don't needlessly set sample rate
...
this may reduce glitches when starting samples
2023-02-03 14:22:03 -06:00
75ed28665c
espressif: i2sout: enlarge buffers
2023-02-03 14:22:03 -06:00
ff95e96160
add `ESPNowStats` class and more
2023-02-04 01:23:45 +05:30
f13e6d8758
update flash chip for Metro M7 1011
2023-02-03 11:56:42 -05:00
a1644f15ea
use esp error for espnow
2023-02-03 15:42:44 +05:30
cac90a6969
refactor common espnow functions
2023-02-03 12:35:06 +05:30
e30126e335
remove `sync` from espnow
2023-02-03 11:12:07 +05:30
f100838ae5
remove `peers_table` from espnow
2023-02-03 10:14:50 +05:30
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419
...
Correct assignment of RMT channels on ESP32C3
2023-02-02 17:35:37 -05:00
750535d4af
Correct assignment of RMT channels on ESP32C3
2023-02-02 14:55:57 -06:00
14c3b52b8d
Merge branch 'main' into espnow
2023-02-03 01:37:07 +05:30
7028a3adfe
rework espnow api
2023-02-03 01:32:28 +05:30
77c6daf4b8
don't throw exception
2023-02-01 16:33:22 -08:00
ae4bb75e29
split espnow between bindings and common-hal
2023-02-01 18:53:58 +05:30
3fdebd4f60
spresense: Add HDR camera support
2023-02-01 12:37:29 +01:00
9c430d45d1
use truthiness of the object itself instead of `any`
2023-02-01 15:27:55 +05:30
d9d94eacca
run updated pre-commit
2023-02-01 13:38:41 +05:30
9ab0733a28
Merge pull request #7530 from BrainBoardz/main
...
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
2023-01-31 23:33:34 -05:00
2656ccffe4
Commit01-31
2023-01-31 19:35:57 -05:00
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main
...
Update mpconfigboard.h with LED definition for BPI-Bit-S2.
2023-01-31 16:08:10 -05:00
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3
...
seeed_xiao_esp32c3 flash mode change to dio
2023-01-31 11:29:24 -08:00
b8d6f20308
Add front buttons as D0/1/2, matching the silk
2023-01-31 10:02:21 -06:00
f3b1ceeb81
Seventh Commit
2023-01-30 20:45:57 -05:00
f71b4bc018
Sixth Commit
2023-01-30 20:32:19 -05:00
e10816f34c
Fifth Commit
2023-01-30 20:20:37 -05:00
3f3519e0ab
Fourth Commit
2023-01-30 20:10:34 -05:00
7c525fdcb0
Third Commit
2023-01-30 19:54:11 -05:00
34f480d735
Second Commit
2023-01-30 19:03:57 -05:00
d6ebf1bf43
First commit
2023-01-30 17:12:21 -05:00
6e31cd0a4f
Update mpconfigboard.h
2023-01-30 15:41:42 +08:00
dc5cd27555
seeed_xiao_esp32c3 flash mode change to dio
...
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
2023-01-30 02:01:33 -05:00
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8
...
Espressif ESP32-S3 DevKitC-1-N32R8
2023-01-29 10:27:08 +05:30
858e212e34
enable octal flash in sdkconfig
2023-01-29 00:23:02 +05:30
7522522a0a
Merge pull request #7501 from pypewpew/pewpewm4-cdc
...
pewpew m4: enable CDC back
2023-01-28 12:00:49 -05:00
5b814a4561
pewpew m4: enable CDC back
...
CDC got disabled on this board by mistake
2023-01-28 17:20:22 +01:00
401d160c58
opi flash needs to be flashed in dout
2023-01-28 11:04:21 +05:30
cda5689263
move `esp32_camera` to `espcamera`
2023-01-27 22:05:43 +05:30
a7b12de6ee
Merge pull request #7473 from MicroDev1/espulp
...
Add ULP FSM
2023-01-26 09:57:35 -08:00
9b98d485bb
switch to `ReadableBuffer` and `WriteableBuffer`
2023-01-26 14:13:38 +05:30
bfb77d0544
move `ULPArch` to `Architecture`
2023-01-26 13:01:14 +05:30
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2023-01-26 11:21:43 +05:30
e5cfab060d
remove redundant config messages
2023-01-26 11:20:18 +05:30
90e8f9d4a8
fix espressif 32MB partition table
2023-01-26 11:19:22 +05:30
5fb0333aa9
Merge pull request #7478 from jepler/fix-esp32s3-reverse-tft-pid
...
Feather ESP32-S2 Reverse TFT: Update PID to match internal list
2023-01-25 21:24:00 -05:00
ace2062564
remove board that will not be manufactured
2023-01-25 15:10:06 -06:00
19c1eb2d1d
update esp-idf from latest release/v4.4
2023-01-25 15:44:43 -05:00
f56a6a92f4
Merge pull request #7474 from RetiredWizard/broadcomRTC
...
Broadcom port: Add 'fake' RTC support
2023-01-25 11:33:17 -08:00
9487fb51a4
prettify espressif partition tables
2023-01-25 19:40:14 +05:30
ecde85734c
Remove a couple unneeded includes.
2023-01-23 15:17:24 -05:00
fb4def2824
remove CIRCUITPY_RTC = 1 from mpconfigport.mk
...
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
2023-01-23 14:52:20 -05:00
43b1d2618e
Remove erroneous left over comment
2023-01-23 14:19:27 -05:00
e018c6d022
Update PID to match internal list
2023-01-23 13:13:27 -06:00
3c10dd8b5f
update espnow api
2023-01-23 23:51:10 +05:30
f15e84de6c
update espnow module
2023-01-23 09:42:39 +05:30
4f830f1bbb
Fix parameter name and remove unnecessary function
2023-01-21 22:57:52 -05:00
3361ec390d
Broadcom port: Add 'fake' RTC support
...
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
2023-01-21 22:19:10 -05:00
2bb12293f8
add ulp fsm
2023-01-21 17:44:08 +05:30
7330c638b9
minimal changes to make espnow work
2023-01-20 14:12:55 +05:30
59c3618cbd
clone espnow implementation
...
Co-authored-by: Nick Moore <nick@zoic.org>
Co-authored-by: shawwwn <shawwwn1@gmail.com>
Co-authored-by: glenn20 <glenn.moloney@gmail.com>
2023-01-20 13:19:59 +05:30
13338df9f1
Merge pull request #7462 from tannewt/fix_rp2_reset_reason
...
Tweak RP2040 reset reason
2023-01-19 21:10:57 -05:00
f826904995
Merge pull request #7468 from DavePutz/issue_6975
...
Fixes for microcontroller.on_next_reset() on NRF
2023-01-19 19:03:46 -05:00
a30f69aaed
Fixes for microcontroller.on_next_reset() on NRF
2023-01-19 15:58:03 -06:00
8f9d1e241d
Save watch_for_interrupt_char to espressif too
2023-01-19 10:28:56 -08:00
dca66eb98c
Watch for ctrl-c over BLE workflow serial
...
Before this, it was impossible to interrupt a running program over
BLE.
2023-01-18 16:28:35 -08:00
f66e865510
Use low power RTC on mimxrt10xx (Teensy41) boards
...
There are apparently two RTC interfaces in the mimxrt10xx dev
kit. The low power interface access the battery backed up hardware.
I've tested this on the Teensy41 and it seems to
fix issue #4574
2023-01-17 23:30:36 -05:00
82a313065e
Tweak RP2040 reset reason
...
Watchdogs are used to reboot out of the bootloader. There is a
scratch register for user watchdogs. So use sdk functions to better
distinguish these.
Related to #7346
2023-01-17 16:12:08 -08:00
683e393878
Add comments for MDNS code
2023-01-17 14:07:30 -08:00
79b76f7bea
Merge pull request #7445 from tannewt/fix_rpi_mdns
...
Share the web workflow MDNS object with the user
2023-01-17 14:46:38 -05:00
8dffd33bdc
Merge pull request #7458 from MicroDev1/board
...
Remove pins reserved for flash on microC3
2023-01-17 11:08:26 -08:00
bfba1e4100
Change common_hal_mcu_processor_set_frequency to void
...
* Add warning about setting RP2040 frequency
2023-01-16 21:26:13 -08:00
cc6dbb3738
Merge pull request #7455 from dhalbert/ensure-nonblocking-socket
...
espressif: always make new client sockets be non-blocking
2023-01-16 10:44:23 +05:30
968d8c5b4b
remove pins reserved for flash on microC3
2023-01-16 10:33:34 +05:30
40534da92a
espressif: always make new client sockets be non-blocking
2023-01-14 17:02:09 -05:00
d4aab422ee
spresense: update SDK to 2.6.0
2023-01-14 20:31:06 +01:00
79bd88349e
Merge pull request #7444 from tannewt/fix_start_end_w_arrays
...
Have start and end kwargs respect element size
2023-01-13 20:11:41 -05:00
ee2fe993dd
Fix repeated MDNS use on Pico W
2023-01-12 14:56:06 -08:00
5c517b7e5a
Handle MDNS deinited better.
2023-01-12 11:24:20 -08:00
72f4a8ebbc
Merge pull request #7423 from 0xCB-dev/add-0xCB-Helios
...
add support for 0xCB Helios rp2040 controller
2023-01-11 16:27:36 -08:00
aa2ba4d88b
Have start and end kwargs respect element size
...
The comment says it is `buffer[start:end]` but it assumed elements
were a single byte long. Now it correctly does multibyte elements
from array.array.
Fixes #4988
2023-01-11 15:36:41 -08:00
78c2fa5b28
Merge pull request #7437 from dhalbert/improve-type-checking-error-msgs
...
Improve type validation error messages, especially for pins
2023-01-11 10:54:22 -08:00
6fdaa78245
Merge pull request #7441 from tannewt/fix_light_sleep_after_deep
...
Ignore ESP-IDF wakeup cause when light sleeping
2023-01-10 20:09:59 -05:00
828fd7f445
Merge pull request #7439 from jepler/issue7438
...
Update cyw43-driver, fix no-password wifi
2023-01-10 20:09:38 -05:00
fbd5f27371
Ignore ESP-IDF wakeup cause when light sleeping
...
The IDF's wakeup cause is only for deep sleep. Without ignoring it,
light sleep will wake up too early when done after a deep sleep
wake.
Fixes #7300
2023-01-10 15:34:15 -08:00
895cd269b3
Merge pull request #7422 from CDarius/m5stack_stick_c
...
Add M5Stack Stick C board
2023-01-10 14:48:47 -08:00
e817563ca0
Update cyw43-driver, fix no-password wifi
...
Now, open wifi works on Pico W, so this closes #7438 .
For the web workflow it's now OK to either
* specify an empty password string (as before)
* not have the CIRCUITPY_WIFI_PASSWORD key at all (new functionality)
2023-01-10 15:07:17 -06:00
a974402542
Improve type validation errors messages, especially for pins
2023-01-10 15:02:55 -05:00
7db8f92554
Update some build flags to be more like the original tft feathers
...
.. enable camera and use default (better) optimization
2023-01-10 12:28:51 -06:00
af70401aa6
Switch the reverse feathers to use modules with psram
...
.. by copying the sdkconfig files from the original s2/s3 tft feathers,
as the module is of the same type.
2023-01-10 12:18:53 -06:00
8f0e72ce2b
Merge remote-tracking branch 'origin/main' into feather-esp32-s23-reverse-tft
2023-01-10 12:16:31 -06:00
a84a8855ed
Add frequency setting for RP2040 boards.
2023-01-07 17:41:37 -08:00
5aa8419455
add pid.codes VID and PID
2023-01-07 13:11:38 +01:00
fa514e22b2
mimxrt10xx gpio pins don't deinit
...
It looks like a rogue "return" made it's way into the reset pin code
for the mimxrt10xx port resulting in pin.deinit() not working.
2023-01-05 19:17:08 -05:00
a2668cdf0d
Added PORT A i2c and slowed down display SPI
2023-01-05 22:30:10 +00:00
56c0f0388d
add 0xCB Helios
2023-01-05 23:02:00 +01:00
208fb341e2
Added M5Stack Stick C board
2023-01-05 21:29:02 +00:00
bb3a1c0a2a
Merge pull request #7153 from fonix232/feature/waveshare_rp2040_lcd_1_28
...
feat: Add support for Waveshare RP2040-LCD-1.28
2023-01-04 10:18:01 -08:00
4f78d63905
Merge pull request #7412 from 2231puppy/e-fidget
...
Add E-Fidget board
2023-01-04 12:32:27 -05:00
38ebe90f7c
Remove unexposed pins from E-Fidget
2023-01-03 19:24:48 -05:00
bea62030b7
Add E-Fidget board
2023-01-03 16:02:24 -05:00
f23a96fa09
Update config with proper USB VID
2023-01-03 20:31:18 +00:00
463c8d0f11
Merge pull request #2 from adafruit/main
...
Merge main
2023-01-03 20:28:18 +00:00
14417a21d1
Merge branch 'adafruit:main' into main
2023-01-03 09:31:49 +01:00
3cf947ff8f
Merge pull request #7399 from CDarius/m5stack_atom_matrix
...
Added M5Stack Atom Matrix board
2023-01-02 13:28:04 -05:00
6d9d593a0d
Merge pull request #7401 from CDarius/m5stack_atom_echo
...
Added M5Stack Atom Echo board
2023-01-02 13:27:48 -05:00
d1cd096813
Merge pull request #7358 from dhalbert/read-only-mac-address-rp2040
...
Read only mac address rp2040
2023-01-02 13:23:28 -05:00
637d47b058
Merge pull request #7402 from CDarius/m5stack_atom_u
...
Added M5Stack Atom U board
2023-01-02 13:21:48 -05:00
03b43b7b3f
complete rework for microcontroller.cpu.frequency and wifi.radio MAC addresses
2023-01-02 11:45:58 -05:00
a061729dcc
Update ports/espressif/boards/m5stack_atom_matrix/sdkconfig
2023-01-02 10:41:25 -05:00
f5c0996fb7
Update ports/espressif/boards/m5stack_atom_echo/sdkconfig
2023-01-02 10:41:11 -05:00
01f6762aa1
Update ports/espressif/boards/m5stack_atom_u/sdkconfig
2023-01-02 10:40:49 -05:00
2da4e06890
fix up esp32-camera submodule
2023-01-02 10:13:20 -05:00
a3adcf0e1a
clarify read-only mac address; reuse translate msgs
2023-01-02 10:13:20 -05:00
4e31522d08
Merge pull request #7373 from jaygreco/add_nullbits_bit_c_pro
...
Add nullbits Bit-C PRO board
2023-01-02 09:22:16 -05:00
4fe00ef74a
Added M5Stack Atom U
2022-12-31 06:21:49 +00:00
dec0b272fe
Fixed I2C bus definition
2022-12-30 23:21:46 +00:00
58e32bd2cb
Fixed speacker and microphone pins definition
2022-12-30 23:09:38 +00:00
52ee5a9272
Added M5Stack Atom Echo
2022-12-30 20:21:00 +00:00
42195a4a29
Added M5Stack Atom Matrix board
2022-12-30 17:37:37 +00:00
ed5d9ac448
Merge pull request #7392 from chukwon/main
...
Update pins.c for lolin_c3_mini
2022-12-30 00:08:39 -05:00
e8ee4b220e
Merge pull request #7398 from dhalbert/cache-memory-fence
...
Use memory fence when disabling cache to avoid -O2 problems
2022-12-30 00:08:24 -05:00
cc92ce4820
Use memory fence when disabling cache to avoid -O2 problems
2022-12-29 19:49:40 -05:00
70b838a42d
Merge pull request #7395 from jepler/fix-getenv_int-dos-newlines
...
Fix getenv_int handling of "dos-style" newlines
2022-12-28 18:32:38 -05:00
83bbfd1815
Allow the tests to directly call the non-heap using _int and _str variants
...
.. of getenv. These can have their own special bugs.
2022-12-28 12:36:58 -06:00
a932fb3fb1
Update pins.c
...
also match lolin_c3_mini pins definition of new version
2022-12-28 21:25:25 +08:00
7a40d449e6
mimxrt10xx/common-hal/UART.C: Fix for bits parameter validation.
...
I believe this will resolve issue #7389
2022-12-27 22:07:54 -05:00
2b8aa9caae
Merge branch 'adafruit:main' into main
2022-12-27 00:33:47 +01:00
928fb0a9c4
Make the "name or service not known" message translatable
2022-12-26 13:58:31 -06:00
cdefd2e674
Add nullbits Bit-C PRO board
2022-12-25 15:21:32 +00:00
0d3b7770d1
Merge pull request #7378 from DavePutz/issue_7325
...
Issue 7352 - set max value of a pulsein
2022-12-24 19:16:44 -05:00
88d0eba7f4
Merge pull request #7258 from m1cha1s/ESP32DevKitV1
...
Esp32 dev kit v1
2022-12-24 09:12:45 -05:00
94dbefacf1
Issue 7352 - set max value of a pulsein
2022-12-23 19:17:45 -06:00
4bd5316929
Merge branch 'adafruit:main' into main
2022-12-22 21:28:34 +01:00
7cfdd24f77
Change flash mode to dio
2022-12-22 09:30:52 +09:00
e80ff20583
Remove IO11 from definition
...
It is used internally on this particular board version despite being broken out to a pin and marked on silkscreen.
2022-12-22 09:29:24 +09:00
9f266c361b
Initializing external flash SPI speed to SPI_FLASH_MAX_BAUDRATE, instead of using driver default speed (32MHz), before probing JEDEC identifier.
2022-12-21 16:33:06 +01:00
2a1bb72797
Merge pull request #7359 from tannewt/rework_coproc_api
...
Rework the coproc API
2022-12-20 20:42:53 -05:00
c16b42e972
Tweak arg checking and comments
2022-12-20 11:00:13 -05:00
e9f032f468
Merge pull request #7364 from jepler/fix-unix-standard-build
...
fix ports/unix builds besides coverage
2022-12-20 06:54:52 -08:00
aa63fae0ae
fix ports/unix builds besides coverage
2022-12-20 07:27:26 -06:00
b36d603cf3
add GP25 as status LED on the Raspberry Pi Pico
2022-12-19 22:11:30 +01:00
0498b1d2ae
Fix indent
2022-12-19 15:51:34 -05:00
674f0402a9
Fix ESP32 builds
2022-12-19 15:30:03 -05:00
f8ac1d9261
Rework the coproc API
...
It is now a generic `memorymap` API and an ESP specific `espulp` module.
Fixes #7218 . Fixes #3234 . Fixes #7300 .
2022-12-19 14:08:38 -05:00
aac324c4d1
added frozen modules, changed to 8BM FLASH
2022-12-18 22:49:28 +00:00
77a98e6107
Merge pull request #7355 from pypewpew/esp32-camera-xclk
...
esp32-camera: make the master_clock_pin really optional
2022-12-17 21:15:31 -05:00
90c805d858
esp32-camera: make the master_clock_pin really optional
...
The master_clock_pin was already optional, but not specifying it would
result in a crash. This fixes it, so it really can be omitted, when the
camera module has its own clock source built in.
2022-12-16 21:53:50 +01:00
66efed5ba5
fix AuthMode printing regression
2022-12-15 15:49:58 -05:00
c6ea3e803a
Merge pull request #7345 from dhalbert/mimx-fix-build
...
redo pin never resetting for mimxrt10xx
2022-12-15 12:21:21 -08:00
b90a6413c2
refactor to reduce duplicate code
2022-12-15 13:17:28 -05:00
5c569f03c2
redo pin never resetting for mimxrt10xx
2022-12-14 19:34:26 -05:00
297657ea9a
Refactor so that all sites of name lookup failure result in gaierror
2022-12-14 14:45:32 -06:00
398b7c26ca
Merge pull request #7321 from jepler/dotenv-becomes-toml
...
Dotenv becomes toml
2022-12-13 19:56:36 -05:00
369507e1da
cxd56 was not using SRC_SHARED_MODULE_INTERNAL
2022-12-13 18:39:25 -05:00
56d4f8f552
can't use object-based calls at this time
2022-12-13 11:32:33 -06:00
d49af4d784
make wording a bit clearer
2022-12-13 08:11:47 -06:00
aa5b1e063f
Added new RP2040 board with integrated SD/Card reader and RTC
2022-12-13 13:34:28 +01:00
adff93c61a
Mark cyw43 pins "never reset" before reset_port
...
reset_port calls reset_all_pins, which disables the built-in pull
down. In theory, this could allow some CYW43 interfacing pin to float
to an inappropriate value. There's no proof of this! but the move can't
really hurt, either
2022-12-12 20:14:08 -06:00
90894014a2
Use the HW LED as status indicator
...
For me this made a rare startup failure stop, which is nonsense.
2022-12-12 19:43:10 -06:00
31fd7cb51b
Merge remote-tracking branch 'origin/main' into dotenv-becomes-toml
2022-12-11 11:06:51 -06:00
66eca9c35e
Updated formatting.
2022-12-11 17:25:26 +01:00
f7e735b492
Added LDO control pin, new flash variants and support functions for the LDO control pin.
2022-12-11 17:11:24 +01:00
9ef5b7d118
Merge branch 'main' of https://github.com/PontusO/circuitpython
2022-12-11 13:02:03 +01:00
da413094f8
Added LDO control pin and initial setup
2022-12-11 13:01:00 +01:00
2bf5d2bc07
Merge remote-tracking branch 'origin/main' into dotenv-becomes-toml
2022-12-10 15:39:50 -06:00
dd6dd5df21
rework the getenv test again
...
* use a virtual fat filesystem during the test
* this makes the file I/O part more closely patch runtime which is nice
* side-steps the need to add a special function for testing
* but test still can't be run on a device, because the vfs calls
are incompatible, and you intentionally can't remount "/" anyway
* and side-steps problems with storing 'bad' toml files
2022-12-10 12:58:08 -06:00
3ab71d7448
Rename test function, make 'bad' files binary & add another test
2022-12-09 15:23:56 -06:00
6dca9db225
Rename test function & fix a bug with default value handling
2022-12-09 14:35:50 -06:00
1f504e5c0f
Remove line accidentally duplicated
2022-12-09 14:15:00 -06:00
44f15d563d
Rename "environ" errors to "getenv" errors
2022-12-09 14:14:53 -06:00
678a466d1a
alphabetize
2022-12-09 14:12:43 -06:00
3a92c079fc
Finish renaming os_environ_get_key to os_getenv
...
.. for consistency.
2022-12-09 14:07:23 -06:00
3cb628d290
fix nrf build
2022-12-08 16:45:58 -06:00
4fa0c4d108
Merge pull request #7320 from dhalbert/seeed-xiao-nrf52840-charge-rate-pin
...
Add pin for charge rate for Seeed XIAO nRF52840 Sense
2022-12-08 16:51:26 -05:00
3459fe322b
Withdraw the _environ module
...
This existed solely for testing, so expose it a different way during
the unix coverage build
Also turn off os.getenv support on samd21.
2022-12-08 15:33:10 -06:00
243ecc2502
remove debugging prints
2022-12-08 14:18:22 -06:00
170918995c
fix mistaken code formatting
...
I wanted to use the idiom
```c
#if GUARD
if (condition) {
alternate code
} else
#else
{
common default code
}
```
idiom, in which the common default code is conditioned both on a
compile-time check and a run-time check. However, I got it wrong
and uncrustify chipped in, adding extra brackets around a following
piece of code and re-indenting it.
2022-12-08 14:16:53 -06:00
4e7d65251f
Add pin for charge rate for Seeed XIAO nRF52840 Sense
2022-12-08 14:09:44 -05:00
1fe05cb8cd
pico w: re-use previous connection if ssid matches
2022-12-08 12:44:34 -06:00
ef2bfdb5db
dotenv becomes settings.toml
2022-12-08 12:44:20 -06:00
68d510cb2f
Update mpconfigboard.h
...
Configure LED pin for STATUS display and to prevent ESP floating pins from constantly lighting led dimly.
2022-12-07 23:00:09 -05:00
295f7b490f
Merge pull request #7313 from jepler/cyw43-additional-delay
...
Add an additional large delay time at start for pico w boards
2022-12-07 19:17:45 -05:00
44af05283a
Merge pull request #7291 from jepler/issue6502
...
Ensure orderly shutdown of ssl socket
2022-12-07 19:12:12 -05:00
2326b49b24
switch this header to 'pragma once' since I'm touching it already
2022-12-07 15:14:54 -06:00
a1dd8405f4
use a more standard method of forward-declaring the structure
2022-12-07 15:14:30 -06:00
ff8d051eff
Add an additional large delay time at start for pico w boards
2022-12-07 15:10:13 -06:00
676e40d62f
Merge pull request #7311 from dhalbert/esp32-box-lite-sdkconfig
...
make esp32-box-lite sdkconfig same as box
2022-12-06 21:31:45 -05:00
3965ef9c2a
make esp32-box-lite sdkconfig same as box
2022-12-06 19:27:00 -05:00
b354cec8cb
Three small ESP web workflow fixes
...
* Set nonblock on all accepted sockets. Not just ones for user code.
* Close an open websocket if another is accepted.
* Set debug level to INFO rather than DEBUG because DEBUG crashes
on ESP32-S3 USB OTG.
2022-12-06 11:49:04 -08:00
ac239c0fb3
Merge pull request #7306 from evildave666/add-luatos-core-esp32c3
...
Add Luatos Core ESP32C3 Board
2022-12-05 13:27:08 -08:00
d7874e65c2
Merge pull request #7299 from BooleanMattock/main
...
Fix to Issue #7224 - Servo update slow due to PWM channel duty cycle update busy-wait
2022-12-05 12:54:41 -08:00
eaf39b4c10
Update pins.c
2022-12-05 16:40:36 +09:00
14b430ed35
Fix pre-commit issues
2022-12-05 16:35:48 +09:00
5b6f06d84c
Add additional files
2022-12-05 16:08:12 +09:00
05a8bf8c38
Create board.c
2022-12-05 16:06:50 +09:00
afb5301cef
Fix to Issue #7224 - tested
2022-12-02 20:21:40 -05:00
4c064c263e
Merge pull request #7294 from tannewt/analogbufio_rework
...
Rework the analogbufio API.
2022-12-02 14:53:16 -08:00
f7504ff857
Tweaks based on review comments
2022-12-02 10:19:31 -08:00
6e40949f6e
Merge pull request #7295 from tannewt/fix_mdns_conflict
...
Fix MDNS hostname mangling
2022-12-02 11:13:07 -05:00
b5dda0b770
Removed esp32_devkit_v1 folder
2022-12-02 14:26:46 +01:00
ddc56f5fdf
Merge pull request #7101 from bill88t/picow-ap
...
Attempt at pi cow ap
2022-12-01 19:55:17 -06:00
ded0ee4816
Fix MDNS hostname mangling
...
cpy-MAC hostnames were being mangled on circuitpython.local
conflicts.
Fixes #6869
2022-12-01 17:54:41 -08:00
255e997345
Rework the analogbufio API.
...
* read() is now readinto() and takes the buffer to write into.
* readinto() returns the number of valid samples.
* readinto() can be interrupted by ctrl-c.
* readinto() API doesn't support signed numbers because it never did.
* sample_rate is now required in the constructor because supported
values will vary per-port.
* 16 bit values are full range. 12 bit samples from RP2040 are stretched
in the same way they are for AnalogIn.
Fixes #7226
2022-12-01 17:46:07 -08:00
7583ccad2a
Ensure orderly shutdown of ssl socket
...
A crash would occur if an SSL socket was not shut down before
`gc_deinit()`.
I do not fully understand the root cause, but some object deinitialization
/ deallocation prior to `gc_deinit` leaves the SSL object in an
inconsistent state.
Rather than resolve the root cause, instead ensure that the closing of
the user socket also closes the SSL socket.
Closes : #6502
2022-12-01 19:29:20 -06:00
082b0d1aed
Merge pull request #7191 from jepler/fastpixelmap
...
Add a fast PixelMap-like class
2022-12-01 11:43:00 -05:00
b41f7460b7
Merge pull request #7181 from jepler/more-string-qstr-savings
...
More space savings
2022-11-30 21:36:07 -05:00
3fb4fd81e9
Revert "debug_dhcp to follow general debug"
2022-11-30 22:44:18 +02:00
ed33f65fd9
move define to proper place
2022-11-30 14:39:52 -06:00
c46e219795
Having an input-only pin is rare, save a string on other ports
2022-11-30 14:39:49 -06:00
0738d50834
debug_dhcp to follow general debug
2022-11-30 22:24:21 +02:00
845b68c351
Merge pull request #7204 from jepler/build-python3x
...
return to using python 3.x for builds
2022-11-30 15:18:29 -05:00
f8070d2141
Change comment, and logic on dhcpserver
2022-11-30 21:51:50 +02:00
d904d8e9a0
Renamed the board folder to doit_esp32_devkit_v1
2022-11-30 20:26:41 +01:00
beb053a94d
more thoroughly disable UART when
2022-11-30 12:06:19 -06:00
e489b73d88
update esp-idf to merge commit
2022-11-30 12:04:47 -06:00
44d5326d4c
fix picow-ap
2022-11-30 19:36:00 +02:00
362018dcca
Merge branch 'main' into picow-ap
2022-11-30 19:11:03 +02:00
2f5ec1cab0
Merge pull request #7281 from jepler/esp32-trailing-dot
...
handle domain with trailing dot
2022-11-30 11:18:47 -05:00
c8390a7918
Merge pull request #7069 from jepler/exception-chain
...
Implement chained exceptions
2022-11-30 11:13:57 -05:00
286efc18fc
handle domain with trailing dot
...
Closes : #7032
2022-11-30 09:29:21 -06:00
a8c70aa7bd
Fix S3 deep sleep
...
Adding `-u ld_include_highint_hdl` forces the linker to keep the
high priority interrupt handler that calls the ipc_isr handler.
The deep sleep is waiting for this interrupt to be handled on core
0 before sleeping from core 1.
Fixes #6090
2022-11-29 17:20:38 -08:00
49ac82564c
Merge pull request #7278 from jepler/sdcardio-failures
...
Sdcardio failures
2022-11-29 15:13:53 -06:00
4af95f1cb1
atmel-samd: Ensure sdioio.SDCard pins are released
2022-11-29 13:45:18 -06:00
8e83f36c36
SAM E54 Xplained devkit hardfaults at start with -O2
...
I don't know why, but other samd5x are using -Os too, see the block above.
Closes : #7277
2022-11-29 13:05:39 -06:00
c13ca95da1
Add MDNS support to Pico W
...
This adds both cpy-MAC.local and circuitpython.local support.
Fixes #7214
2022-11-28 16:15:28 -08:00
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
...
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
680e56c52a
Changed creator id
2022-11-25 14:09:35 +01:00
26fbb25653
Fixed formatting
2022-11-25 13:55:06 +01:00
fb46e7c4d8
Defined esp32 board for the esp32 devkit v1
2022-11-25 12:13:44 +01:00
c6ca2bdd59
disable pixelmap on bluemicro833
2022-11-24 09:09:48 -06:00
79f4344860
fix playing mono files on stereo output
2022-11-23 22:11:41 -05:00
30563655d7
Merge pull request #7249 from dhalbert/wifi-connect-ap-api
...
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-23 10:29:05 -08:00
17be447c4b
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-22 17:11:03 -05:00
6d022733b3
Merge pull request #7162 from rhooper/boards-list
...
add boards list to make error message
2022-11-21 23:18:37 -05:00
19f1119994
Merge branch 'main' into fastpixelmap
...
# Conflicts:
# shared-module/adafruit_pixelbuf/PixelBuf.c
2022-11-21 20:25:58 -06:00
c3a96a63c0
Enable* web workflow for Pico W
...
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.
Progress on #7214
2022-11-21 16:24:05 -08:00
b40facd0b4
Error msg changes
2022-11-22 01:00:34 +02:00
df0150ff0e
Add common settings to sdkconfig-esp32c3.defaults
2022-11-21 15:15:26 -05:00
85a83b8150
Simplify some ESP32-C3 board sdkconfig files
2022-11-21 12:35:10 -05:00
d4834cb7ec
Merge pull request #7234 from jepler/espressif-uart-console-break
...
Interrupt on UART 'break'
2022-11-19 14:46:18 -05:00
96fc85cd18
Merge pull request #7229 from dhalbert/rp2040-spi-mode-3
...
RP2040: have clock start high when SPI polarity high
2022-11-19 14:32:02 -05:00
4e0f8e7fcd
Interrupt on UART 'break'
...
Tested and working with the CH9102F USB converter on Adafruit's
Feather ESP32 V2 (& tio as the software on the host computer)
Closes : #7233
2022-11-19 10:57:21 -06:00
1611cf98da
have clock start high in SPI mode 3
2022-11-18 18:27:38 -05:00
88bd9ef6b8
just change the ap error
2022-11-18 22:51:05 +02:00
7c51201e88
fix nRF build directory naming
2022-11-19 00:23:03 +05:30
c3c1717813
refactor common port specific Makefile code
2022-11-18 23:00:28 +05:30
e2a3597263
add awesome new make error message
...
Copied from initial implementation on atmel-samd
Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
2022-11-18 11:27:23 +05:30
3a418379d3
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2022-11-18 09:40:20 +05:30
b8cd6c093f
picow-ap progress
2022-11-17 21:47:39 +02:00
f9f1edbb08
setup PWM status LED on aithinker ESP32-C3 boards
2022-11-17 20:32:50 +01:00
be53193dde
Merge pull request #7219 from tannewt/c3_pwm_in_use
...
Fix PWM status LED never_reset
2022-11-17 13:59:47 -05:00
a234b74e87
Merge branch 'adafruit:main' into picow-ap
2022-11-16 21:32:46 +02:00
6689b9ad09
Merge pull request #7208 from domdfcoding/weact_pico_16mb
...
Add support for the 16MB WeAct Studio Pico
2022-11-16 09:59:37 -08:00
a4bd7721e9
Merge pull request #7217 from dhalbert/samd21-tick-event
...
samd21: port_disable_tick() should disable event channel
2022-11-16 09:05:48 -08:00
b74893eb07
samd21: port_disable_tick() should disable event channel
2022-11-15 21:52:12 -05:00
12545fb060
Add prototype feather esp32s2/s3 reverse tft board definition
...
This is not final hardware and may change!
2022-11-15 20:22:20 -06:00
8e4e84c58b
Match channel number, not timer number
2022-11-15 16:51:47 -08:00
93ee54a2fb
Fix PWM status LED never_reset
...
It doesn't need never reset because the status LED is only active
when user code isn't.
This also fixes PWM never reset on espressif so that deinit will
undo it.
Fixes #6223
2022-11-15 16:14:31 -08:00
ef34378b1d
Merge pull request #7201 from jepler/rp2040-light-sleep
...
raspberrypi: Make port_idle_until_interrupt work
2022-11-15 17:25:48 -06:00
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug
...
Fix pi cow debug compilation
2022-11-15 14:08:44 -06:00
412df210ad
Merge remote-tracking branch 'origin/main' into build-python3x
2022-11-15 14:02:09 -06:00
b8a2d3ffdc
Merge pull request #7212 from dhalbert/stm-pwm-fix
...
STM: off-by-one TIMx reference; other code cleanup and minor fixes
2022-11-15 11:50:53 -08:00
11dcd69f2c
Merge pull request #7207 from jepler/nicer-pin-checking
...
shared-bindings: Get rid of CYW43 special cases in shared-bindings
2022-11-14 23:35:26 -05:00
6954e569b7
since it ain't leaving..
2022-11-15 00:05:01 +02:00
fde1c05e6d
Revert "remove lwip_src"
...
This reverts commit 398e9122a0
2022-11-14 20:03:41 +02:00
fdeaf805d3
STM: off-by-one TIMx reference; other code cleanup and minor fixes
2022-11-14 13:00:32 -05:00
398e9122a0
remove lwip_src
2022-11-14 19:33:06 +02:00
6ad61a3fd1
Radio.c work
2022-11-14 19:31:18 +02:00
14b20087b5
only ignore sdkconfig* files in the espressif port's top directory
...
danh and microdev1 noticed that this ignore pattern was over-broad
and caused added sdkconfig files in boards/ (which should be committed)
to be ignored and not proposed for addition by common tools like
git status, git gui, etc.
This pattern anchors the search so that it only matches in the
ports/espressif directory, so ports/espressif/sdkconfig is ignored
but ports/espressif/boards/example/sdkconfig is not ignored anymore
2022-11-14 11:29:18 -06:00
2e6dd1bf1f
Radio.c no longer needs ping.h
2022-11-14 18:36:42 +02:00
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings
...
.. by moving it into a new weak function that can be replaced
just by the picow build.
2022-11-14 08:44:08 -06:00
e1046b1050
Add support for the 16MB WeAct Studio Pico
2022-11-14 14:04:07 +00:00
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor
...
Add ability to read VOLTAGE_MONITOR on Pico W
2022-11-13 22:40:54 -05:00
f3169246ba
Implement chained exceptions
...
This adds the __cause__, __context__ and __suppress_context__
members to exception objects and makes e.g., `raise exc from cause`
set them in the same way as standard Python.
2022-11-13 19:52:50 -06:00
b8f5def985
return to using python 3.x for builds
2022-11-13 09:26:49 -06:00
6e9909c65e
Merge pull request #7198 from CRCibernetica/crcibernetica-ideaboard
...
Add new board crcibernetica-ideaboard
2022-11-13 09:12:43 -05:00
43566dec5b
allow inclusion of board while blocking build files
2022-11-13 12:13:32 +00:00
c96208902f
Merge pull request #7199 from MicroDev1/espressif
...
Enable `microcontroller.cpu.temperature` on esp32s3
2022-11-12 11:16:45 -05:00
e4d620f055
make whitespace match
2022-11-12 09:17:52 -06:00
78fc43baab
raspberrypi: Make port_idle_until_interrupt work
...
This needs thorough testing before it's merged, as we tried
and reverted this once before (#5341 and #5356 ).
I think that besides checking for tinyusb having "something to do",
the fact that `port_interrupt_after_ticks` and `port_disable_tick`
weren't implemented that was causing a secondary problem.
I've tested this on a pico w over reboot-cycles and ctrl-c-cycles,
with and without drive automounting, with and without serial repl open,
and on a power-only connection.
I didn't notice the problem reported in #5356 after merely implementing
port_idle_until_interrupt; but I did notice that sleeps in general would
take over-long until "something" (like writing to the USB drive) happened;
I think "something" was probably calling port_enable_tick(). When this
problem was happening, sleeps would take a lot longer; for instance,
`sleep(.001)` would take about 1/20s and `sleep(.1)` would take about 1/7s.
2022-11-12 09:16:41 -06:00
9e94d7e758
Merge pull request #7196 from dhalbert/rp2-pin-alarm-race
...
RP2040: ignore pin changes before deep sleep
2022-11-12 09:36:15 -05:00
512cda8b73
enable `microcontroller.cpu.temperature` on esp32s3
2022-11-12 10:03:00 +05:30
6c3b9b64da
add crcibernetica-ideaboard
2022-11-12 03:22:15 +00:00
983502d6e3
ignore pin changes before sleep
2022-11-11 15:31:49 -05:00
f5c637dc10
Add adafruit_pixelmap.PixelMap
...
.. a fast helper for animations. It is similar to and inspired by the
PixelMap helper in Adafruit LED Animation library, but with an extremely
fast 'paste' method for setting a series of pixels. This is a common
operation for many animations, and can give a substantial speed improvement.
It's named `adafruit_pixelmap` so that we can package a compatible version
in pure Python for systems that can't fit it in C in flash, or for
Blinka.
This is a proof of concept and can make a very fast comet animation:
```python
import time
import adafruit_pixelbuf
import adafruti_pixelmap
import board
import neopixel
from supervisor import ticks_ms
from adafruit_led_animation.animation.solid import Solid
from adafruit_led_animation import color
pixel_pin = board.GP0
pixel_num = 96
pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB")
evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2)))
odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4))
print(odd_indices)
odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices)
assert len(odds) == len(odd_indices)
comet_length = 16
comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4)
for i in range(comet_length)]
comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4)
for i in range(comet_length)]
pos1 = 0
pos2 = 96//4
while True:
evens.paste(comet1, pos1, wrap=True, reverse=False, others=0)
pos1 = (pos1 + 1) % len(evens)
odds.paste(comet2, pos2, wrap=True, reverse=True, others=0)
pos2 = (pos2 - 1) % len(odds)
pixels.show()
m = ticks_ms()
if m % 2000 > 1000:
time.sleep(.02)
```
2022-11-11 07:54:33 -06:00
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c
...
u32_t -> uint32_t
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-11-11 14:40:47 +02:00
0bf9df232a
fix debug
2022-11-11 14:17:57 +02:00
a37c36c383
Merge branch 'adafruit:main' into main
2022-11-10 21:47:23 +01:00
11f1174658
picow: Change init to use country code routine.....place holder for future improvements to allow country code setting.
2022-11-10 17:24:09 +02:00
851c2cd8cb
picow: Add channel setting when starting AP
2022-11-10 17:23:59 +02:00
8fdb2df0bf
picow: enable dhcpserver for apmode.
2022-11-10 17:23:38 +02:00
25c0a0aca9
Merge branch 'adafruit:main' into picow-ap
2022-11-10 17:04:21 +02:00
d90bc1760f
Merge pull request #7188 from kylemccreery/pillbug
...
Add new board PillBug
2022-11-10 09:10:40 -05:00
1f332e7007
Adding pillbug initial commit
2022-11-09 23:15:38 -05:00
e6936decac
Merge pull request #7169 from blues/pdmin
...
STM32L4 PDMIn support
2022-11-09 14:19:51 -05:00
11ce074318
Update mpconfigboard.mk
2022-11-08 23:43:13 +01:00
97f693d2d8
docs(swan_r5): updated copyright notices
2022-11-08 14:18:54 -08:00
843d6b42f9
formatting(swan_r5): lexicographically sorted the board module names in the swan_r5 makefile include [ci-skip][skip-ci]. Skip CI since this is a cosmetic change only.
2022-11-08 12:04:30 -08:00
7f36a365cf
delay 100us for analog voltage to stabilize
...
.. otherwise, depending on the prior state of the pin as a digital
input, the value read could be 20% low.
2022-11-08 10:43:14 -06:00
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W
...
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.
Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.
Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.
```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```
Closes : #7020
2022-11-08 09:37:15 -06:00
28e4834da8
Merge branch 'adafruit:main' into main
2022-11-08 01:02:46 +01:00
a568a5c2e2
Rename sdkonfig to sdkconfig
2022-11-06 22:14:19 +01:00
f1e658f8bb
Update sdkonfig
2022-11-06 22:07:12 +01:00
452ebe27ae
socketpool: make socket objects selectable
...
.. which will lead to them being usable in async contexts, pending
relevant changes in asyncio
2022-11-05 12:05:19 -05:00
ad9db01f5f
Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software.
2022-11-04 17:27:08 -07:00
f3ec46bbb5
Add missing pin definitions for 42. Keebs Frood
2022-11-04 15:33:16 +01:00
882100a87a
Create sdkonfig
2022-11-02 22:10:44 +01:00
71b5e6088b
Update mpconfigboard.mk
2022-11-02 22:07:28 +01:00
d6fe378456
Update mpconfigboard.h
2022-11-02 22:05:39 +01:00
403a5b2681
Merge pull request #7126 from jepler/scorpio
...
add feather rp2040 scorpio
2022-11-02 14:47:40 -05:00
8933f93439
simplify and use columns for boardlist
2022-11-01 11:00:48 -04:00
36c4cc7d30
fix output layout of board list
2022-11-01 00:18:46 -04:00
dec128f508
add boards list to make error message
2022-10-31 23:57:59 -04:00
9b1181804c
Merge branch 'adafruit:main' into main
2022-10-30 19:16:05 +01:00
468709abcc
Update pins.c
...
Hopefully last change nefore merge.
2022-10-30 18:51:46 +01:00
952812cdea
Merge pull request #7154 from dhalbert/alarm-lifetime
...
Save wake alarm info in static storage, simplifying recording of alarm
2022-10-30 12:28:50 -04:00
ae8f415bd5
Update board.c
2022-10-30 02:17:38 +02:00
0aa41fa92e
change BOARD_USER_SAFE_MODE_ACTION into a separate sentence
2022-10-30 01:55:42 +02:00
934d2a7004
remove duplicate press boot button, it's already the default
2022-10-30 01:52:17 +02:00
5d7c58da5d
Update pins.c
...
Attempt to fix build issue
2022-10-30 01:52:09 +02:00
ded134c346
store wake_alarm in a static object
2022-10-29 16:26:36 -04:00
992e97d84b
fix: pre-commit
2022-10-29 20:00:37 +01:00
9ca057385a
feat: Add support for Waveshare RP2040-LCD-1.28
2022-10-29 18:52:43 +01:00
a064b52ad7
CIRCUITPY_ESP32_CAMERA, not CIRCUITPY_USB_CAMERA
2022-10-29 10:13:11 -04:00
2ffd16a10c
Update mpconfigboard.mk
2022-10-29 09:27:09 -04:00
19fd9107a2
Merded with main branch
2022-10-29 07:46:54 +00:00
7282bd9c9a
Removed boilerplate already handled by MP_WEAK definitions
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-10-29 09:34:45 +02:00
053d0fa8b5
Merge pull request #7145 from chukwon/fix_lolin_s3
...
fix and add lolin_s3 pins definition
2022-10-28 23:50:53 -04:00
d95a085be4
Merge pull request #7144 from CDarius/add_m5stack_core_safe_mode
...
Added safe mode button and fix coyright attribution
2022-10-28 15:59:59 -04:00
0221cc8df7
Merge remote-tracking branch 'adafruit/main' into alarm-lifetime
2022-10-28 14:11:32 -04:00
9c66320474
fix and add lolin_s3 pins definition
2022-10-28 21:40:35 +08:00
4e20049c38
Merge pull request #7122 from jepler/picow-ssl-server
...
pico w: implement sslsocket bind, listen, accept
2022-10-28 09:33:21 -04:00
b815a4cc5e
Added safe mode button and fix coyright attribution
2022-10-28 12:06:11 +00:00
27142d090b
Fixed copyright attribution
2022-10-28 11:08:30 +00:00
9a09c62eee
espressif add back `ESP32_CAMERA`
2022-10-28 13:55:33 +05:30
b276ed7af9
Fixed copyright attribution
2022-10-28 05:32:09 +00:00
b94447fde5
Added safe mode button
2022-10-28 05:00:54 +00:00
9307b62ad5
wip
2022-10-27 22:42:04 -04:00
8fe44a23d2
Merge pull request #7140 from dhalbert/esp32-s3-box-spiram-fix
...
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 16:09:59 -04:00
26688fa826
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 14:45:29 -04:00
baa44a2dba
Merge pull request #7133 from CDarius/fix_m5stack_core_basic
...
Fixed wrong configuration in sdkconfig
2022-10-27 18:34:07 +05:30
d774f3d34f
Update board.c
...
Fix for CLI
2022-10-27 15:02:44 +02:00
0e0c106740
Add Maker badge board
2022-10-27 01:06:38 +02:00
cdbad53649
Fixed wrong configuration in sdkconfig
2022-10-26 20:06:27 +00:00
be07722bbc
Added board M5Stack Atom Lite
2022-10-26 19:57:23 +00:00
ca25016b52
Merge pull request #7119 from jepler/picow-reuseaddr
...
Enable, use SOF_REUSEADDR
2022-10-26 15:25:50 -04:00
5ebdf281cb
Merge pull request #7125 from dhalbert/esp-pin-alarm-fix
...
Fix setup of Espressif PinAlarms
2022-10-26 15:24:58 -04:00
7545e02a8e
add feather rp2040 scorpio
2022-10-26 10:05:37 -05:00
366cf4a048
Merge pull request #7113 from CDarius/m5stack_core_fire
...
Added M5Stack Core Fire board
2022-10-26 09:10:50 -05:00
0bc986ea7a
Merge pull request #7124 from piit79/frood
...
Adds support for the 42. Keebs Frood RP2040 board
2022-10-26 09:09:42 -05:00
76ed0445bb
Merge pull request #7120 from CDarius/m5stack_core_basic
...
Added M5Stack Core Basic board
2022-10-26 09:09:11 -05:00
56d8b9451f
don't wait for pulls in PinAlarm
2022-10-25 20:42:08 -04:00
e49cd00d60
fix debug UART pins on Metro ESP32-S2
2022-10-25 20:41:08 -04:00
032bf63f2d
Raise error with positive code in recv_into for espressif
2022-10-25 22:53:01 +02:00
0cf096dda1
pico w: implement sslsocket bind, listen, accept
2022-10-25 14:46:41 -05:00
f6e2369bbd
Removed not available UART in board
2022-10-25 16:53:42 +00:00
f9983ff556
Added M5Stack Core Basic board
2022-10-25 16:42:14 +00:00
f997d0053d
Enable, use SOF_REUSEADDR
...
This is the lwip no-os version of SO_REUSEADDR, which is set on all
listening sockets in the espressif port; do so here as well,
it makes running servers easier. The "address in use" error does
not occur.
2022-10-25 10:09:16 -05:00
bd7f0e23d7
Adds support for the 42. Keebs Frood RP2040 board
...
https://github.com/piit79/Frood
2022-10-25 16:40:32 +02:00
c8191e8830
Better pins definitions
2022-10-25 11:41:39 +00:00
5ea8b75e17
Add STEMMA_I2C() object to Picos for Cowbells.
2022-10-24 16:27:32 -04:00
5fa67548ea
Added missing sdkconfig file
2022-10-24 20:03:06 +00:00
39171d7626
Removed unnecessary compiler flags
2022-10-24 19:21:26 +00:00
beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
773bb99c96
Merge pull request #7099 from Neradoc/add-m5stampc3-board
...
Add M5Stack Stamp C3 Board
2022-10-23 00:05:44 +05:30
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
8f0a674a1b
coproc module enhancements
...
- add light and pretend-to-deep sleep support
- check coproc running status
2022-10-22 19:08:49 +05:30
83b54d003d
implement more checks in coproc module
...
- check memory address range
- check firmware size at an earlier stage
2022-10-22 19:05:48 +05:30
7a50beb67e
PicoW more ap work
2022-10-22 11:58:44 +03:00
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
da7edf80e0
Merge pull request #7091 from MicroDev1/corpoc
...
Add `CoprocAlarm`
2022-10-21 13:36:01 -04:00
5b2728bd65
reorganize espressif `mpconfigport.mk`
2022-10-21 17:35:59 +05:30
2285dd1838
update espressif risc-v build configuration
...
- use optimization level O2
- explicitly state risc-v arch
2022-10-21 17:11:56 +05:30
8cc536bb7f
PicoW start_ap()
2022-10-21 13:20:16 +03:00
b33a2b45dc
add coproc alarm
2022-10-20 18:38:20 +05:30
b5b649801b
Merge pull request #6902 from MicroDev1/coproc
...
Add `coproc` module
2022-10-20 12:51:59 +05:30
5232e3f6c3
add coproc module
2022-10-20 09:09:44 +05:30
7015b7396e
Merge pull request #7089 from jepler/picow-gpio-number
...
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
2022-10-19 22:42:16 -04:00
576a1ac700
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
...
You might wonder how this fixes a problem with PulseIn, when the
changes aren't to any of those files! PulseIn is implemented in terms of
StateMachine, which had some assumptions about the relation between
the index of a pin object in mcu_pin_global_dict_table and its "pin
number". This was true, until some pins were removed from the
microcontroller module on Pico W.
Closes : #7078
2022-10-19 21:09:50 -05:00
8bef4282c0
pico w: implement static configuration methods in wifi.Radio
2022-10-19 20:54:53 -05:00
31d7c91c85
Merge pull request #7059 from jepler/asyncio-tests-dogfood
...
asyncio: we should dogfood our own asyncio implementation during automated tests
2022-10-19 15:11:04 -04:00
08e1cdb282
Merge pull request #7079 from jepler/picow-2xmss
...
Pico W grab bag
2022-10-19 15:03:00 -04:00
607e917363
Merge pull request #7073 from MicroDev1/patch
...
Fix 2/4MB Partition Tables & Makefile
2022-10-17 22:29:16 -04:00
6e350a65cf
Merge pull request #7076 from bill88t/early-wifi
...
Implement async wifi connection on picow
2022-10-17 19:54:58 -05:00
3b7feccd9b
picow: Implement stop_station
...
Weirdly we have to stop the AP too (which we never started),
or cyw43_tcpip_link_status still reports that STA is connected.
As long as AP mode isn't implemented, this doesn't matter and
we can just do it.
2022-10-17 19:42:10 -05:00
57756863ef
picow: depending on memory pressure, may only be able to write 1 MSS
...
Foamyguy discovered that trying to send >2920 bytes at once consistently
failed. I further discovered that sometimes trying to send >1460 bytes
would fail too. By "fail", I mean that it would take a very long time
(around 200 * 50ms) before erroneously reporting that all bytes were
written.
In my testing, this change causes larger writes to successfully
send either 2920 or 1460 bytes (possibly after doing some 50ms waits
for a previous packet to clear).
The documentation of socket.send always stated that it COULD send fewer
bytes than requested, but adafruit_httpserver assumed that the number
of requested bytes were always sent, so after this change alone,
adafruit_httpserver will still not work properly.
Closes : #7077 (albeit fixes are needed in adafruit_httpserver too)
2022-10-17 19:42:07 -05:00
861b22730e
picow: if initial write fails, write at most 1 TCP MSS of data
2022-10-17 19:28:02 -05:00
1975742d9f
picow: fix formatting numbers in lwip debug output
2022-10-17 19:28:02 -05:00
6128f4e5af
picow: add resolution of ".local" names
2022-10-17 19:28:01 -05:00
fb91c2f436
cleanup `sdkconfig-esp32.defaults`
...
- remove log level: set by -opt or -debug sdkconfig
- remove lwip hostname: set by board specific sdkconfig
2022-10-17 22:05:20 +05:30
47c373e67e
Use `cyw43_tcpip_link_status` instead
2022-10-17 18:33:32 +03:00
bce024f59e
Implement async wifi connection on picow
2022-10-17 18:17:14 +03:00
47541afc7c
picow: ask at a lower level if the interface is up
...
Closes : #7072
```
Adafruit CircuitPython 8.0.0-beta.2-9-g5192082e64-dirty on 2022-10-17; Raspberry Pi Pico W with rp2040
>>> import wifi
>>> print(wifi.radio.ipv4_address)
None
>>> import os
>>> wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
>>> print(wifi.radio.ipv4_address)
10.0.2.94
```
2022-10-17 10:08:50 -05:00
434c6d5604
fix uf2 bootloader condition in makefile
2022-10-17 19:45:48 +05:30
5114ae7a31
fix `2MB-no-uf2` partition table
2022-10-17 19:44:08 +05:30
f86377e0f1
fix `4MB-no-uf2` partition table
2022-10-17 19:42:41 +05:30
d4b1d4d430
Fix GPIO state when initializing CYW43 pin
...
Closes : #7063
2022-10-15 13:10:22 -05:00
e7b25dbf73
improve `dualbank` errors
2022-10-15 13:20:10 +05:30
6a8bc738ec
Make it easy to test just a subset of tests
...
with e.g., 'make TEST_EXTRA="extmod/uasyncio*.py" test'
2022-10-14 17:07:27 -05:00
963a51487a
unix Makefile: easy wait to print test failures as diffs
2022-10-14 14:44:52 -05:00
0ce84b27e8
Merge pull request #7053 from CytronTechnologies/add-pin-definitions-maker-feather-aiot-s3
...
Added Pin Definitions for Cytron Maker Feather AIoT S3
2022-10-14 11:31:53 -04:00
062d63ee3a
Merge pull request #7050 from jepler/picow-wirelsess-off-in-deep-sleep
...
picow: Turn off wifi co-processor regulator when entering deep sleep
2022-10-14 08:17:16 -04:00
8caafd9079
Merge pull request #7051 from jepler/picow-hashlib
...
implement hashlib for picow
2022-10-14 08:14:41 -04:00
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
66b539d768
fix espressif log level
2022-10-14 11:33:10 +05:30
3b3fe44174
implement hashlib for picow
2022-10-13 20:42:50 -05:00
0c5fd55c16
picow: Turn off wifi co-processor regulator when entering deep sleep
...
This reduces power consumption during true deep sleep.
In my measurements with ppk2 and a program that _irrevocably_ entered
deep sleep (no time alarm or pin alarm), power usage as measured on a
ppk2 decreased from ~10mA to ~1mA.
2022-10-13 20:10:10 -05:00
bb3e04a078
Merge pull request #7048 from georgboe/fix-recvinto-errno
...
Return correct errno in raspberrypi's Socket.c
2022-10-13 18:19:02 -04:00
e768b9ebb3
Return correct errno
2022-10-13 21:00:51 +02:00
de7a9c38fc
Merge remote-tracking branch 'adafruit/main' into add-os-utime-function
2022-10-13 14:15:13 -04:00
1569c7ed33
Merge pull request #7045 from jepler/smaller-microcontroller-temperature-samd
...
samd: Size-optimize the temperature code with an 0.5 to 2.0 degree relative additional error
2022-10-13 14:02:51 -04:00
7e4b2a09eb
Merge pull request #7000 from MicroDev1/storage-extend
...
Add Storage Extension Support
2022-10-13 10:05:55 -04:00
728fea4ca4
add storage extension python api
2022-10-13 09:53:33 +05:30
f7d39ceae4
comment on the revised algorithm
2022-10-12 16:25:09 -05:00
a943167d69
samd: Reduce a further 48 bytes for non-full builds
...
Another reduction of -48 bytes can be had if the fine calculation
step is skipped. The worst difference compared to the old reference
code with my calibration values in the 0° to 60° was 2°C,
and the difference at 25°C is 1°C.
The final size decrease for non-full builds like Trinket M0 is 268
bytes.
2022-10-12 15:53:44 -05:00
b251e78ac5
samd: size-optimize microcontroller temp calc
...
Perform most arithmetic with scaled integer values.
For my calibration values
```
const uint32_t NVMCTRL_TEMP_LOG[]={0xfc05511e, 0xcc7ac0f7};
```
the maximum difference between the old and new calculation is 0.50°C.
The difference is smallest (0.13°) at 25.87°C in the old scale.
This reduces mcu_processor_get_temperature from 568 bytes to 348 bytes
(-220 bytes)
2022-10-12 15:44:14 -05:00
874ddd67bf
Pico W: ssl: factor out do_handshake
2022-10-12 11:38:30 -05:00
1641a7c002
Pico W: ssl: Correctly handle errors in send/recv
...
The prefixed versions raise Python exceptions, the un-prefixed return
negative error values. We don't want to raise an exception from here,
it leaves the SSL stack in an undefined state.
2022-10-12 11:38:30 -05:00
7c849fdadb
Pico W: ssl: Raise MemoryError for allocation errors
2022-10-12 11:38:29 -05:00
b1f7940297
Pico W: Correctly treat empty cadata= as disabling host checking
2022-10-12 11:38:29 -05:00
ca9523b814
Pico w: socket: Correctly return negative error code from recv_into
2022-10-12 11:38:29 -05:00
62cbd3bcd8
Pico w: socket: correctly track sockets generated by accept()
2022-10-12 11:38:26 -05:00
ab22d5a8cd
Merge pull request #7024 from flom84/stm-include-headers-fixes
...
Remove redundant header files in STM port
2022-10-12 10:22:29 +05:30
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev
...
Add BananaPi BPI-PicoW-S3 .
2022-10-11 22:53:37 -04:00
376df8ec7e
Add BananaPi BPI-PicoW-S3 .
...
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
2022-10-12 09:11:25 +08:00
e19abef57e
forgot to add these!
2022-10-11 13:12:43 -04:00
851f8a188d
Merge remote-tracking branch 'adafruit/main' into HEAD
2022-10-11 12:21:59 -04:00
4cd370ecf8
Merge remote-tracking branch 'adafruit/main' into add-os-utime-function
2022-10-10 17:51:59 -04:00
0c8b261ec9
picow: Add support of self-signed certificates.
...
## Testing self-signed certificates and `load_verify_locations`
Obtain the badssl "self-signed" certificate in the correct form:
```sh
openssl s_client -servername self-signed.badssl.com -connect untrusted-root.badssl.com:443 < /dev/null | openssl x509 > self-signed.pem
```
Copy it and the script to CIRCUITPY:
```python
import os
import wifi
import socketpool
import ssl
import adafruit_requests
TEXT_URL = "https://self-signed.badssl.com/ "
if not wifi.radio.ipv4_address:
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
pool = socketpool.SocketPool(wifi.radio)
context = ssl.create_default_context()
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} without certificate (should fail)")
try:
response = requests.get(TEXT_URL)
except Exception as e:
print(f"Failed: {e}")
else:
print(f"{response.status_code=}, should have failed with exception")
print("Loading server certificate")
with open("/self-signed.pem", "rb") as certfile:
context.load_verify_locations(cadata=certfile.read())
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} with certificate (should succeed)")
try:
response = requests.get(TEXT_URL)
except Exception as e:
print(f"Unexpected exception: {e}")
else:
print(f"{response.status_code=}, should be 200 OK")
```
2022-10-10 15:53:56 -05:00
c98174eea5
Add support for SSL client certificate (load_cert_chain)
...
Tested with badssl.com:
1. Get client certificates from https://badssl.com/download/
2. Convert public portion with `openssl x509 -in badssl.com-client.pem -out CIRCUITPY/cert.pem`
3. Convert private portion with `openssl rsa -in badssl.com-client.pem -out CIRCUITPY/privkey.pem` and the password `badssl.com`
4. Put wifi settings in CIRCUITPY/.env
5. Run the below Python script:
```py
import os
import wifi
import socketpool
import ssl
import adafruit_requests
TEXT_URL = "https://client.badssl.com/ "
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
pool = socketpool.SocketPool(wifi.radio)
context = ssl.create_default_context()
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} without certificate (should fail)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 400 Bad Request")
input("hit enter to continue\r")
print("Loading client certificate")
context.load_cert_chain("/cert.pem", "privkey.pem")
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} with certificate (should succeed)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 200 OK")
```
2022-10-10 15:10:53 -05:00
81d227de73
Use types from circuitpython.
2022-10-10 20:55:44 +02:00
Jeff Epler
Dan Halbert
Scott Shawcroft
Neradoc
hathach
Dan Halbert
Benjamin Shockley
kreasteve
MicroDev
Kyle Brown
foamyguy
Matthias Kreier
Bill Sideris
Paint Your Dragon
BrainBoardz
gamblor21
Matthew McGowan
Thierry Chantier
Milind
RetiredWizard
Dennis Field
root
Gregory Neverov
Mark
Pierre Constantineau
Ubuntu
Alex
Gregory Neverov
Kamil Tomaszewski
brainboardz
Wind-stormger
Radomir Dopieralski
Colin B
Conor Burns
CDario
2231puppy
Jozsef Kiraly
Pontus Oldberg
chukwon
Jay Greco
evildave666
root
BooleanMattock
m1cha1s
Dominic Davis-Foster
dronecz
paul-1
Kyle McCreery
Petr Sedlacek
Rose Hooper
chukwon
Georg Bøe
Kattni Rembor
Neradoc
askpatrickw
Kong Wai Weng
flom84