Add BananaPi BPI-PicoW-S3 .
Adds support for the BananaPi BPI-PicoW-S3 Boards. Based on esp32s3 chip. With one WS2812 LED, one monochrome LED, one ceramic antenna. Support double-reset to tinyUF2.
This commit is contained in:
parent
14fc4a0797
commit
376df8ec7e
39
ports/espressif/boards/bpi_picow_s3/board.c
Normal file
39
ports/espressif/boards/bpi_picow_s3/board.c
Normal file
@ -0,0 +1,39 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "supervisor/board.h"
|
||||
#include "mpconfigboard.h"
|
||||
#include "shared-bindings/microcontroller/Pin.h"
|
||||
|
||||
void board_init(void) {
|
||||
// Debug UART
|
||||
#ifdef DEBUG
|
||||
common_hal_never_reset_pin(&pin_GPIO43);
|
||||
common_hal_never_reset_pin(&pin_GPIO44);
|
||||
#endif /* DEBUG */
|
||||
}
|
||||
|
||||
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
|
37
ports/espressif/boards/bpi_picow_s3/mpconfigboard.h
Normal file
37
ports/espressif/boards/bpi_picow_s3/mpconfigboard.h
Normal file
@ -0,0 +1,37 @@
|
||||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
// Micropython setup
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "BPI-PicoW-S3"
|
||||
#define MICROPY_HW_MCU_NAME "ESP32S3"
|
||||
|
||||
#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
|
||||
|
||||
#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
|
||||
#define DEFAULT_UART_BUS_TX (&pin_GPIO43)
|
||||
|
||||
#define DOUBLE_TAP_PIN (&pin_GPIO34)
|
20
ports/espressif/boards/bpi_picow_s3/mpconfigboard.mk
Normal file
20
ports/espressif/boards/bpi_picow_s3/mpconfigboard.mk
Normal file
@ -0,0 +1,20 @@
|
||||
USB_VID = 0x303A
|
||||
USB_PID = 0x812C
|
||||
USB_PRODUCT = "BPI-PicoW-S3"
|
||||
USB_MANUFACTURER = "BananaPi"
|
||||
|
||||
IDF_TARGET = esp32s3
|
||||
|
||||
INTERNAL_FLASH_FILESYSTEM = 1
|
||||
LONGINT_IMPL = MPZ
|
||||
|
||||
# The default queue depth of 16 overflows on release builds,
|
||||
# so increase it to 32.
|
||||
CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
|
||||
|
||||
CIRCUITPY_ESP_FLASH_MODE = dio
|
||||
CIRCUITPY_ESP_FLASH_FREQ = 80m
|
||||
CIRCUITPY_ESP_FLASH_SIZE = 8MB
|
||||
|
||||
# Include these Python libraries in firmware.
|
||||
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
|
58
ports/espressif/boards/bpi_picow_s3/pins.c
Normal file
58
ports/espressif/boards/bpi_picow_s3/pins.c
Normal file
@ -0,0 +1,58 @@
|
||||
#include "shared-bindings/board/__init__.h"
|
||||
|
||||
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
|
||||
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP0), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP1), MP_ROM_PTR(&pin_GPIO44) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP2), MP_ROM_PTR(&pin_GPIO47) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP3), MP_ROM_PTR(&pin_GPIO17) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP4), MP_ROM_PTR(&pin_GPIO15) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP5), MP_ROM_PTR(&pin_GPIO13) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP6), MP_ROM_PTR(&pin_GPIO12) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP7), MP_ROM_PTR(&pin_GPIO14) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP8), MP_ROM_PTR(&pin_GPIO18) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP9), MP_ROM_PTR(&pin_GPIO16) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP10), MP_ROM_PTR(&pin_GPIO21) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP11), MP_ROM_PTR(&pin_GPIO38) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP12), MP_ROM_PTR(&pin_GPIO39) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP13), MP_ROM_PTR(&pin_GPIO40) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP14), MP_ROM_PTR(&pin_GPIO41) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP15), MP_ROM_PTR(&pin_GPIO42) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP16), MP_ROM_PTR(&pin_GPIO1) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP17), MP_ROM_PTR(&pin_GPIO2) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP18), MP_ROM_PTR(&pin_GPIO3) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP19), MP_ROM_PTR(&pin_GPIO4) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP20), MP_ROM_PTR(&pin_GPIO5) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP21), MP_ROM_PTR(&pin_GPIO6) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP22), MP_ROM_PTR(&pin_GPIO7) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP25), MP_ROM_PTR(&pin_GPIO46) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO46) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP26), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP26_A0), MP_ROM_PTR(&pin_GPIO8) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO8) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP27), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP27_A1), MP_ROM_PTR(&pin_GPIO9) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO9) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP28), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP28_A2), MP_ROM_PTR(&pin_GPIO10) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO10) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP29), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_GP29_A3), MP_ROM_PTR(&pin_GPIO11) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO11) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
|
||||
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
|
||||
|
||||
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }
|
||||
};
|
||||
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
|
47
ports/espressif/boards/bpi_picow_s3/sdkconfig
Normal file
47
ports/espressif/boards/bpi_picow_s3/sdkconfig
Normal file
@ -0,0 +1,47 @@
|
||||
#
|
||||
# Component config
|
||||
#
|
||||
#
|
||||
# ESP32S3-Specific
|
||||
#
|
||||
CONFIG_ESP32S3_SPIRAM_SUPPORT=y
|
||||
#
|
||||
# SPI RAM config
|
||||
#
|
||||
CONFIG_SPIRAM_MODE_QUAD=y
|
||||
# CONFIG_SPIRAM_MODE_OCT is not set
|
||||
# CONFIG_SPIRAM_TYPE_AUTO is not set
|
||||
CONFIG_SPIRAM_TYPE_ESPPSRAM16=y
|
||||
# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
|
||||
# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
|
||||
CONFIG_SPIRAM_SIZE=2097152
|
||||
#
|
||||
# PSRAM Clock and CS IO for ESP32S3
|
||||
#
|
||||
CONFIG_DEFAULT_PSRAM_CLK_IO=30
|
||||
CONFIG_DEFAULT_PSRAM_CS_IO=26
|
||||
# end of PSRAM Clock and CS IO for ESP32S3
|
||||
|
||||
# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
|
||||
# CONFIG_SPIRAM_RODATA is not set
|
||||
# CONFIG_SPIRAM_SPEED_120M is not set
|
||||
CONFIG_SPIRAM_SPEED_80M=y
|
||||
# CONFIG_SPIRAM_SPEED_40M is not set
|
||||
CONFIG_SPIRAM=y
|
||||
CONFIG_SPIRAM_BOOT_INIT=y
|
||||
# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
|
||||
CONFIG_SPIRAM_USE_MEMMAP=y
|
||||
# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
|
||||
# CONFIG_SPIRAM_USE_MALLOC is not set
|
||||
CONFIG_SPIRAM_MEMTEST=y
|
||||
# end of SPI RAM config
|
||||
|
||||
# end of ESP32S3-Specific
|
||||
|
||||
#
|
||||
# LWIP
|
||||
#
|
||||
CONFIG_LWIP_LOCAL_HOSTNAME="BPI-PicoW-S3"
|
||||
# end of LWIP
|
||||
|
||||
# end of Component config
|
Loading…
Reference in New Issue
Block a user