Merge pull request #7402 from CDarius/m5stack_atom_u

Added M5Stack Atom U board

ports/espressif/boards/m5stack_atom_u/board.c

@@ -0,0 +1,29 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 CDarius
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/m5stack_atom_u/mpconfigboard.h

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 CDarius
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "M5Stack Atom U"
+#define MICROPY_HW_MCU_NAME         "ESP32"
+
+#define MICROPY_HW_NEOPIXEL         (&pin_GPIO27)
+
+#define CIRCUITPY_BOARD_I2C         (1)
+#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO32, .sda = &pin_GPIO26}}
+
+#define CIRCUITPY_BOARD_SPI         (1)
+#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO23, .mosi = &pin_GPIO19, .miso = &pin_GPIO33}}
+
+// For entering safe mode
+#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO39)
+
+// Explanation of how a user got into safe mode
+#define BOARD_USER_SAFE_MODE_ACTION translate("The central button was pressed at start up.\n")
+
+// UART pins attached to the USB-serial converter chip
+#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO1)
+#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO3)

ports/espressif/boards/m5stack_atom_u/mpconfigboard.mk

@@ -0,0 +1,10 @@
+CIRCUITPY_CREATOR_ID =  0x10151015
+CIRCUITPY_CREATION_ID = 0x00320006
+
+IDF_TARGET = esp32
+
+CIRCUITPY_ESP_FLASH_MODE = dio
+CIRCUITPY_ESP_FLASH_FREQ = 40m
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+
+CIRCUITPY_ESP32_CAMERA = 0

ports/espressif/boards/m5stack_atom_u/pins.c

@@ -0,0 +1,42 @@
+#include "shared-bindings/board/__init__.h"
+#include "shared-module/displayio/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // External pins are in silkscreen order, from top to bottom, left side, then right side
+
+    { MP_ROM_QSTR(MP_QSTR_A25), MP_ROM_PTR(&pin_GPIO25) },
+    { MP_ROM_QSTR(MP_QSTR_D25), MP_ROM_PTR(&pin_GPIO25) },
+    { MP_ROM_QSTR(MP_QSTR_DAC1), MP_ROM_PTR(&pin_GPIO25) },
+
+    { MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_GPIO33) },
+    { MP_ROM_QSTR(MP_QSTR_A33), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_D22), MP_ROM_PTR(&pin_GPIO22) },
+
+    { MP_ROM_QSTR(MP_QSTR_D21), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_ROM_QSTR(MP_QSTR_PORTA_SDA), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_A26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_D26), MP_ROM_PTR(&pin_GPIO26) },
+    { MP_ROM_QSTR(MP_QSTR_DAC2), MP_ROM_PTR(&pin_GPIO25) },
+
+    { MP_ROM_QSTR(MP_QSTR_PORTA_SCL), MP_ROM_PTR(&pin_GPIO32) },
+    { MP_ROM_QSTR(MP_QSTR_A32), MP_ROM_PTR(&pin_GPIO32) },
+    { MP_ROM_QSTR(MP_QSTR_D32), MP_ROM_PTR(&pin_GPIO32) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO27) },
+
+    { MP_ROM_QSTR(MP_QSTR_BTN), MP_ROM_PTR(&pin_GPIO39) },
+
+    { MP_ROM_QSTR(MP_QSTR_IR_LED), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_PDM_MIC_CLK), MP_ROM_PTR(&pin_GPIO5) },
+
+    { MP_ROM_QSTR(MP_QSTR_PDM_MIC_DATA), MP_ROM_PTR(&pin_GPIO19) },
+
+    { MP_ROM_QSTR(MP_QSTR_PORTA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/m5stack_atom_u/sdkconfig

@@ -0,0 +1,26 @@
+CONFIG_ESP32_SPIRAM_SUPPORT=n
+
+# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="M5StaskAtomU"
+# end of LWIP
+
+# Uncomment (remove ###) to send ESP_LOG  output to TX/RX pins
+### #
+### # ESP System Settings
+### #
+### CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y
+### # CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set
+### CONFIG_ESP_CONSOLE_UART_CUSTOM=y
+### CONFIG_ESP_CONSOLE_NONE is not set
+### CONFIG_ESP_CONSOLE_UART=y
+### CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_0=y
+### # CONFIG_ESP_CONSOLE_UART_CUSTOM_NUM_1 is not set
+### CONFIG_ESP_CONSOLE_UART_NUM=0
+### CONFIG_ESP_CONSOLE_UART_TX_GPIO=17
+### CONFIG_ESP_CONSOLE_UART_RX_GPIO=16
+### CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
+### # CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
+### # end of ESP System Settings