Commit Graph

1253 Commits

Author SHA1 Message Date
Jeff Epler 8e895e1986
Add floppyio for rp2040
Tested on RP2040 Feather with a 3.5" Prodigy diskette, the whole
surface reads 100% across 3+ trials.
2022-01-17 16:34:47 -06:00
gamblor21 cf2c8eeec4 Moved init functions to helper python library 2022-01-17 16:13:27 -06:00
Dan Kulinski ca8299e51b Update logic for offset 2022-01-14 15:25:40 -07:00
Dan Kulinski fbd9e3284b Add two byte length check 2022-01-14 15:25:40 -07:00
Jeff Epler ab4e1481fc
Are these files even used? 2022-01-14 15:22:30 -06:00
Jeff Epler 6c53b06a3c
Update adafruit floppy submodule 2022-01-14 14:11:12 -06:00
Jeff Epler d816a4f19d
Add floppyio
Initially enabled for samd51, this enables reading raw flux data as well
as DOS/MFM formatted media.

This is only the low-level code for reading & decoding flux pulses from a floppy drive.
high level details will live in a Python library.

adafruit-circuitpython-floppy will take care of details like stepping
from track to track, etc.
2022-01-13 15:37:36 -06:00
Ben Combee 131b94540e audiomp3: reset decoded_samples when file resets
In testing, I saw that the decoded_samples value kept increasing when I
stopped and restarted playback, as I'd missed setting it back to zero
during the reset operation.
2022-01-02 15:19:25 -06:00
Ben Combee 98b0029a29 audiomp3: add decoded_samples property
In my testing, there is no way to accurately know how far into a MP3 file
you're currently playing. You can use monotonic time, but that can have
drift versus the audio playback system, which may not be running at exactly
the expected sample rate.

To allow syncing animation with timestamps in a MP3 file, this presents a
new property, decoded_samples, that records the number of audio samples
sent out of the decoder. While this may not be a completely accurate time,
due to mixer delays, it's much better position that the monotonic clock
difference.

Implementation is keeping track of this value in the mp3file structure and
adding to it whenever data is sent out of the decoder. The property
implementation was a copy/paste from current properties in the audiomp3
files.
2022-01-01 23:28:43 -06:00
Jeff Epler 8a94d9a255
Merge pull request #5784 from WarriorOfWire/vectorio_contains
vectorio contains(x, y)
2021-12-31 16:11:24 -07:00
Dan Halbert 2c4e3aa880
Merge pull request #5786 from prplz/fix-busdevice-stub-path
Fix busdevice stub path
2021-12-28 10:43:54 -05:00
Michael Himing fe71ee0812 Fix busdevice stub path 2021-12-28 19:31:40 +11:00
Dan Halbert 41d494df0b go into safe mode if not CIRCUITPY available 2021-12-27 18:58:24 -05:00
Kenny 8de5f90086 vectorio contains(x, y)
new utility function for all vectorio shape specializations for testing
whether a screen-space x,y point falls within a shape's x,y.

This respects the current orientation of the screen in the manner of
displayio and vectorio - so your x,y requests are in the same coordinate
domain as your x,y locations and your width/height etc. properties that
ou set on other shapes. I.e., if you're using this for touch points then
you will need to make sure the touch events are in the same x,y domain as
your display.

```
contains(2, 4) -> true
------------------
|                |
|                |
| --             |
| | \            |
| |. \           |
| |   \          |
| |____\         |
|                |
------------------

contains(5, 4) -> false
------------------
|                |
|                |
| --             |
| | \            |
| |  \.          |
| |   \          |
| |____\         |
|                |
------------------
```

This helps provide low overhead introspection of shape coverage on screen.
It's envisioned that this will be used for things like touch-and-drag
widget controls, touch "areas" and may help with random ornament placement
on toy Christmas trees.
2021-12-27 12:01:19 -10:00
foamyguy 2ce9dc7680 Merge branch 'adafruit_main' into tilegrid_size_props 2021-12-20 07:31:08 -06:00
George Waters c615daff30
Explicitly cast float to mp_int_t
Not sure why this is necessary, but it prevents an off-by-one error in
some (rare?) circumstances.
2021-12-17 16:23:58 -05:00
Scott Shawcroft 01f8cffdae
Support 32 bit color with vectorio
Fixes #5639
2021-12-14 17:13:11 -08:00
gamblor21 7c1afb070a Documentation fixes 2021-12-13 22:31:29 -06:00
gamblor21 11ef0b48c0 Change map to tuple to save memory and match _write 2021-12-13 22:31:29 -06:00
gamblor21 9fafd7d7fd Initial commit 2021-12-13 22:31:29 -06:00
foamyguy c4be8a5c94 tilegrid size properties 2021-12-13 09:44:08 -06:00
Kenny 17b53c7ebe vectorio: Add width and height properties to rectangle
Closes: https://github.com/adafruit/circuitpython/issues/5695
2021-12-12 19:50:00 -08:00
microDev b6858e4ca7
allow multiple board buses
Co-authored-by: Neradoc <neraOnGit@ri1.fr>
2021-12-11 23:07:21 +05:30
Jeff Epler bc9ef87d05
print addl debug message 2021-12-08 21:03:06 -06:00
Jeff Epler 11c573ef95
sdcardio: Don't require reaching idle state during early init
.. which is what the addition of cmd25 made happen. We still signal
an error when failing to reach the idle state at any other time,
which _is_ different than adafruit_sdcard but I think that it is
correct.

This fixed #5600 according to Dan's testing on a GCM4 on the internal
SD card slot. There are still some ambiguous results on the MM4 with
external SD card slot on 6" jumper wires.
2021-12-08 21:03:03 -06:00
Scott Shawcroft ee5536386d
Merge remote-tracking branch 'adafruit/main' into rpi 2021-11-24 14:23:23 -08:00
Scott Shawcroft 153ff6031e
Merge pull request #5616 from jepler/bitmaptools-bugfixes
Bitmaptools bugfixes
2021-11-24 11:50:29 -08:00
Scott Shawcroft b09c777d0a
Merge pull request #5584 from gamblor21/is31
IS31FL3741 Framebuffer Driver
2021-11-24 11:41:51 -08:00
Jeff Epler 30c07a772f
bitmaptools: dither: get rid of shifts
this happens to make the occasional FS dither artifact disappear.
I guess `a * b >> 8` and `(a * b) / 256` are not identical.  I'm not
sure if it was just the parens or not, but write the clearer code and
rely on the compiler to substitute an appropriate shift if possible.
2021-11-24 09:51:24 -06:00
Jeff Epler 9af76a2f03
bitmaptools dither: Fix off-by-one error filling row data 2021-11-24 09:51:23 -06:00
Scott Shawcroft 927a720de9
Fix I2C and feedback from Dan 2021-11-23 17:23:13 -08:00
gamblor21 97032fdbd0 Renaming files 2021-11-23 17:21:13 -06:00
gamblor21 9f2660f6ac Capitalization changes 2021-11-23 17:06:39 -06:00
gamblor21 fc3b0340b5 Remove hard coded mapping of LEDs 2021-11-23 13:21:09 -06:00
Timon a1052d5f73
Initial broadcom port for Raspberry Pi
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.

There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
  themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
  mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
  and unnecessary for the vast majority of builds.

Fixes #4314
2021-11-22 14:54:44 -08:00
gamblor21 5243a33584 Check map to display size 2021-11-20 14:04:49 -06:00
gamblor21 6b2d43d3c8 Mapping for LEDs to diplay 2021-11-20 14:04:49 -06:00
gamblor21 9fa3feffb1 Cleanup 2021-11-20 13:46:12 -06:00
gamblor21 2f277eba3e Cleanup and i2c fix 2021-11-20 13:46:12 -06:00
gamblor21 e877449ae0 Cleanup 2021-11-20 13:46:12 -06:00
gamblor21 aa92d3a476 Cleanup and scaling addition 2021-11-20 13:46:11 -06:00
gamblor21 29c58575b0 Removed prints updated brightness 2021-11-20 13:46:11 -06:00
gamblor21 d063bf2675 Initial commit for IS31 2021-11-20 13:46:11 -06:00
Jeff Epler f4e68e8fae
use mp_get_stream_raise, it's more specific 2021-11-20 08:53:04 -05:00
Jeff Epler ee5e7161af
bitmaptools: use stream API
this allows `readinto` to succeed in the unix port, where the VFS
is not FAT
2021-11-20 08:51:40 -05:00
Jeff Epler edac675c48
rainbowio: optimize for code size
.. this saves 76 bytes on trinket_m0
2021-11-12 17:31:22 -06:00
Jeff Epler c91901dc37
rainbowio: Fix some things the unix build errors about 2021-11-12 17:31:13 -06:00
Jeff Epler d55388a17d
Add bitmaptools to unix build 2021-11-12 10:47:18 -06:00
Jeff Epler c6dbc7df3a
Add displayio bitmaps to unix build 2021-11-12 10:47:17 -06:00
Jeff Epler 340d6b9213
more missing-prototypes fixes 2021-11-10 21:00:17 -06:00
Jeff Epler c9475adb00
Enable -Werror=missing-prototypes on espressif port 2021-11-10 11:07:45 -06:00
Jeff Epler 621953c960
Additional missing-prototypes fixes
I think this correctly enables missing-prototypes in atmel-samd
and raspberrypi ports.
2021-11-10 10:55:53 -06:00
Jeff Epler 63fbf98186
Enable -Wmissing-prototypes for atmel-samd 2021-11-09 20:05:00 -06:00
Jeff Epler cbfa41f238 Merge remote-tracking branch 'origin/main' into dither3 2021-11-08 16:46:36 -06:00
Jeff Epler eaf8bc0abe bitmaptools: add dither
This can convert a BGR565_SWAPPED bitmap to B&W in about 82ms on
esp32-s2.
2021-11-08 10:35:44 -06:00
Jeff Epler dfafab675f Enable L8 mode for alphablend 2021-11-05 11:26:07 -05:00
Jeff Epler 8e8c44afea Merge remote-tracking branch 'origin/main' into alphablend 2021-11-05 11:24:51 -05:00
Jeff Epler 2ec2761ce0 bitmaptools: add alphablend
This blends two "565"-format bitmaps, including byteswapped ones. All
the bitmaps have to have the same memory format.

The routine takes about 63ms on a Kaluga when operating on 320x240 bitmaps.
Of course, displaying the bitmap also takes time.

There's untested code for the L8 (8-bit greyscale) case. This can be
enabled once gifio is merged.
2021-11-05 08:16:48 -05:00
Jeff Epler 334a9c85ce Merge remote-tracking branch 'origin/main' into gifio 2021-11-04 20:22:00 -05:00
Jeff Epler a8614a61dc ParallelImageCapture: Add continuous capture on espressif
By having a pair of buffers, the capture hardware can fill one buffer while
Python code (including displayio, etc) operates on the other buffer.  This
increases the responsiveness of camera-using code.

On the Kaluga it makes the following improvements:
 * 320x240 viewfinder at 30fps instead of 15fps using directio
 * 240x240 animated gif capture at 10fps instead of 7.5fps

As discussed at length on Discord, the "usual end user" code will look like
this:

    camera = ...

    with camera.continuous_capture(buffer1, buffer2) as capture:
        for frame in capture:
            # Do something with frame

However, rather than presenting a context manager, the core code consists of
three new functions to start & stop continuous capture, and to get the next
frame.  The reason is twofold.  First, it's simply easier to implement the
context manager object in pure Python.  Second, for more advanced usage, the
context manager may be too limiting, and it's easier to iterate on the right
design in Python code.  In particular, I noticed that adapting the
JPEG-capturing programs to use continuous capture mode needed a change in
program structure.

The camera app was structured as
```python
while True:
    if shutter button was just pressed:
        capture a jpeg frame
    else:
        update the viewfinder
```

However, "capture a jpeg frame" needs to (A) switch the camera settings and (B)
capture into a different, larger buffer then (C) return to the earlier
settings. This can't be done during continuous capture mode. So just
restructuring it as follows isn't going to work:

```python
with camera.continuous_capture(buffer1, buffer2) as capture:
    for frame in capture:
        if shutter button was just pressed:
            capture a jpeg frame, without disturbing continuous capture mode
        else:
            update the viewfinder
```

The continuous mode is only implemented in the espressif port; others
will throw an exception if the associated methods are invoked.  It's not
impossible to implement there, just not a priority, since these micros don't
have enough RAM for two framebuffer copies at any resonable sizes.

The capture code, including single-shot capture, now take mp_obj_t in the
common-hal layer, instead of a buffer & length.  This was done for the
continuous capture mode because it has to identify & return to the user the
proper Python object representing the original buffer.  In the Espressif port,
it was convenient to implement single capture in terms of a multi-capture,
which is why I changed the singleshot routine's signature too.
2021-11-03 11:02:46 -05:00
Jeff Epler e733876574 dither in x/y, not i/j
The easiest thing to implement was to use the i/j numbers, but they were not
directly related to image x/y coordinates.  This may slow things down a tiny
little bit, but it looks much better.
2021-10-27 16:52:56 -05:00
Jeff Epler ef4623dfae gifio: Add dithered output
It's not a great dither, but we're low on CPU time sooo
2021-10-27 10:54:31 -05:00
Jeff Epler dc00226143 gifio: write block data directly into output buffer 2021-10-27 09:38:07 -05:00
Jeff Epler 7d6ac96001 GifWriter: improve efficiency
* Increase colorspace conversion efficiency.
   This not only avoids a function call, it avoids the time-consuming
   switch statement in conver_pixel (replacing it with a single
   conditional on the byteswap flag + accounting for BGR/RGB during
   palette creation)

 * Buffer all the bytes of a single frame together.  By reducing
   low level write calls we get a decent speed increase even though
   it increases data-shuffling a bit.

Together with some other changes that enable "double buffered" camera
capture, this gets me to 8.8fps capturing QVGA (320x240) gifs and
11fps capturing 240x240 square gifs.
2021-10-26 11:11:28 -05:00
Jeff Epler c34b6f757f Implement gifio.GifWriter
This involves:
 * Adding a new "L8" colorspace for colorconverters
 * factoring out displayio_colorconverter_convert_pixel
 * Making a minimal "colorspace only" version of displayio for the
   unix port (testing purposes)
 * fixing an error message

I only tested writing B&W animated images, with the following script:
```python
import displayio
import gifio

with gifio.GifWriter("foo.gif", 64, 64, displayio.Colorspace.L8) as g:
    for i in range(0, 256, 14):
        data = bytes([i, 255-i] * 32 + [255-i, i] * 32) * 32
        print("add_frame")
        g.add_frame(data)

# expected to raise an error, buffer is not big enough
with gifio.GifWriter("/dev/null", 64, 64, displayio.Colorspace.L8) as g:
    g.add_frame(bytes([3,3,3]))
```
2021-10-26 08:54:18 -05:00
Jeff Epler 015bfb6e63
remove debug print 2021-10-25 16:52:23 -05:00
Jeff Epler f22299d2b3 sdcardio: Use CMD25 across multiple writeblocks() calls
This increases write rates (of gifio from #5490) from about 2.4fps to over
5fps by making more efficient use of the SD card protocol.

Because of details of oofatfs, it usually manages 64 writes in a single
CMD25, then two writes in a different area of the SD card (presumably,
filesystem metadata).  I couldn't find where to increase "64" to a higher
number. This may depend on the allocation size of the filesystem.

I tried preallocating too, but oddly it significantly lowered the write
rate.

Any trailing data is committed when the file is close()d, or when
the `sync` method of the SDCard object is called.
2021-10-25 10:59:28 -05:00
Jeff Epler 3fb12fe289 Introduce SDCard.sync method, does nothing 2021-10-25 10:03:07 -05:00
Dan Halbert fa96ea1f72 Merge remote-tracking branch 'adafruit/main' into hid-boot-protocol 2021-10-18 15:30:24 -04:00
Jeff Epler 9eebb3dbab rotaryio: Add the ability to set the divisor
At present, Adafruit's rotary encoders all move 1 quadrature cycle per
detent, so we originally hard-coded division-by-4.  However, other
encoders exist, including ones without detents, ones with 2 detents per
cycle, and others with 4 detents per cycle.

The new `divisor` property and constructor argument allows selecting
a divisor of 1, 2, or 4; with the default of 4 giving backward
compatibility.

The property is not supported (yet?) on espressif MCUs; it throws an
error if a value other than 4 is set.
2021-10-16 09:43:45 -05:00
Jeff Epler a0dd2ccec1 rotaryio: shared_module_softencoder_state_update: no need for BAD state
All we do on a BAD state transition is avoid counting up or down,
but the same is accomplished by using the "0" table value instead.
2021-10-16 09:41:38 -05:00
Jeff Epler 8d8f83bc05 Merge tag 'v1.17' into merge-1.17
F-strings, new machine.I2S class, ESP32-C3 support and LEGO_HUB_NO6 board

This release of MicroPython adds support for f-strings (PEP-498), with a
few limitations compared to normal Python.  F-strings are essentially
syntactic sugar for "".format() and make formatting strings a lot more
convenient.  Other improvements to the core runtime include pretty printing
OSError when it has two arguments (an errno code and a string), scheduling
of KeyboardInterrupt on the main thread, and support for a single argument
to the optimised form of StopIteration.

In the machine module a new I2S class has been added, with support for
esp32 and stm32 ports.  This provides a consistent API for transmit and
receive of audio data in blocking, non-blocking and asyncio-based
operation.  Also, the json module has support for the "separators" argument
in the dump and dumps functions, and framebuf now includes a way to blit
between frame buffers of different formats using a palette.  A new,
portable machine.bitstream function is also added which can output a stream
of bits with configurable timing, and is used as the basis for driving
WS2812 LEDs in a common way across ports.

There has been some restructuring of the repository directory layout, with
all third-party code now in the lib/ directory.  And a new top-level
directory shared/ has been added with first-party code that was previously
in lib/ moved there.

The docs have seen further improvement with enhancements and additions to
the rp2 parts, as well as a new quick reference for the zephyr port.
The terms master/slave have been replaced with controller/peripheral,
mainly relating to I2C and SPI usage.  And u-module references have been
replaced with just the module name without the u-prefix to help clear up
the intended usage of modules in MicroPython.

For the esp8266 and esp32 ports, hidden networks are now included in WLAN
scan results.  On the esp32 the RMT class is enhanced with idle_level and
write_pulses modes.  There is initial support for ESP32-C3 chips with
GENERIC_C3 and GENERIC_C3_USB boards.

The javascript port has had its Makefile and garbage collector
implementation reworked so it compiles and runs with latest the Emscripten
using asyncify.

The mimxrt port sees the addition of hardware I2C and SPI support, as well
as some additional methods to the machine module.  There is also support
for Hyperflash chips.

The nrf port now has full VFS storage support, enables source-line on
traceback, and has .mpy features consistent with other ports.

For the rp2 port there is now more configurability for boards, and more
boards added.

The stm32 port has a new LEGO_HUB_NO6 board definition with detailed
information how to get this LEGO Hub running stock MicroPython.  There is
also now support to change the CPU frequency on STM32WB MCUs.  And USBD_xxx
descriptor options have been renamed to MICROPY_HW_USB_xxx.

Thanks to everyone who contributed to this release: Amir Gonnen, Andrew
Scheller, Bryan Tong Minh, Chris Wilson, Damien George, Daniel Mizyrycki,
David Lechner, David P, Fernando, finefoot, Frank Pilhofer, Glenn Ruben
Bakke, iabdalkader, Jeff Epler, Jim Mussared, Jonathan Hogg, Josh Klar,
Josh Lloyd, Julia Hathaway, Krzysztof Adamski, Matúš Olekšák, Michael
Weiss, Michel Bouwmans, Mike Causer, Mike Teachman, Ned Konz, NitiKaur,
oclyke, Patrick Van Oosterwijck, Peter Hinch, Peter Züger, Philipp
Ebensberger, robert-hh, Roberto Colistete Jr, Sashkoiv, Seon Rozenblum,
Tobias Thyrrestrup, Tom McDermott, Will Sowerbutts, Yonatan Goldschmidt.

What follows is a detailed list of changes, generated from the git commit
history, and organised into sections.

Main components
===============

all:
- fix signed shifts and NULL access errors from -fsanitize=undefined
- update to point to files in new shared/ directory

py core:
- mpstate: make exceptions thread-local
- mpstate: schedule KeyboardInterrupt on main thread
- mperrno: add MP_ECANCELED error code
- makeqstrdefs.py: don't include .h files explicitly in preprocessing
- mark unused arguments from bytecode decoding macros
- objexcept: pretty print OSError also when it has 2 arguments
- makeversionhdr: add --tags arg to git describe
- vm: simplify handling of MP_OBJ_STOP_ITERATION in yield-from opcode
- objexcept: make mp_obj_exception_get_value support subclassed excs
- support single argument to optimised MP_OBJ_STOP_ITERATION
- introduce and use mp_raise_type_arg helper
- modsys: optimise sys.exit for code size by using exception helpers
- objexcept: make mp_obj_new_exception_arg1 inline
- obj: fix formatting of comment for mp_obj_is_integer
- emitnative: reuse need_reg_all func in need_stack_settled
- emitnative: ensure stack settling is safe mid-branch
- runtime: fix bool unary op for subclasses of native types
- builtinimport: fix condition for including do_execute_raw_code()
- mkrules: automatically build mpy-cross if it doesn't exist
- implement partial PEP-498 (f-string) support
- lexer: clear fstring_args vstr on lexer free
- mkrules.mk: do submodule sync in "make submodules"

extmod:
- btstack: add missing call to mp_bluetooth_hci_uart_deinit
- btstack: check that BLE is active before performing operations
- uasyncio: get addr and bind server socket before creating task
- axtls-include: add axtls_os_port.h to customise axTLS
- update for move of crypto-algorithms, re1.5, uzlib to lib
- moduselect: conditionally compile select()
- nimble: fix leak in l2cap_send if send-while-stalled
- btstack/btstack.mk: use -Wno-implicit-fallthrough, not =0
- utime: always invoke mp_hal_delay_ms when >= to 0ms
- modbluetooth: clamp MTU values to 32->UINT16_MAX
- nimble: allow modbluetooth binding to hook "sent HCI packet"
- nimble: add "memory stalling" mechanism for l2cap_send
- uasyncio: in open_connection use address info in socket creation
- modujson: add support for dump/dumps separators keyword-argument
- modlwip: fix close and clean up of UDP and raw sockets
- modbluetooth: add send_update arg to gatts_write
- add machine.bitstream
- modframebuf: enable blit between different formats via a palette

lib:
- tinyusb: update to version 0.10.1
- pico-sdk: update to version 1.2.0
- utils/stdout_helpers: make mp_hal_stdout_tx_strn_cooked efficient
- axtls: switch to repo at micropython/axtls
- axtls: update to latest axtls 2.1.5 wih additional commits
- re1.5: move re1.5 code from extmod to lib
- uzlib: move uzlib code from extmod to lib
- crypto-algorithms: move crypto-algorithms code from extmod to lib
- update README's based on contents of these dirs

drivers:
- neopixel: add common machine.bitstream-based neopixel module
- neopixel: optimize fill() for speed
- neopixel: reduce code size of driver
- cyw43: fix cyw43_deinit so it can be called many times in a row
- cyw43: make wifi join fail if interface is not active

mpy-cross:
- disable stack check when building with Emscripten

Support components
==================

docs:
- library: document new esp32.RMT features and fix wait_done
- library: warn that ustruct doesn't handle spaces in format strings
- esp8266/tutorial: change flash mode from dio to dout
- replace master/slave with controller/peripheral in I2C and SPI
- rp2: enhance quickref and change image to Pico pinout
- rp2: update general section to give a brief technical overview
- library/utime.rst: clarify behaviour and precision of sleep ms/us
- library/uasyncio.rst: document stream readexactly() method
- library/machine.I2S.rst: fix use of sd pin in examples
- zephyr: add quick reference for the Zephyr port
- library/zephyr: add libraries specific to the Zephyr port
- templates: add unix and zephyr quickref links to top-index
- rename ufoo.rst to foo.rst
- replace ufoo with foo in all docs
- library/index.rst: clarify module naming and purpose
- library/builtins.rst: add module title
- library/network.rst: simplify socket import
- add docs for machine.bitstream and neopixel module
- library: fix usage of :term: for frozen module reference
- esp8266: use monospace for software tools
- reference: mention that slicing a memoryview causes allocation

examples: no changes specific to this component/port

tests:
- extmod: make uasyncio_heaplock test more deterministic
- cpydiff/modules_struct_whitespace_in_format: run black
- extmod/ujson: add tests for dump/dumps separators argument
- run-multitests.py: add broadcast and wait facility
- multi_bluetooth/ble_subscribe.py: add test for subscription
- extmod/vfs_fat_finaliser.py: ensure alloc at never-used GC blocks
- basics: split f-string debug printing to separate file with .exp
- pybnative: make while.py test run on boards without pyb.delay

tools:
- autobuild: add scripts to build release firmware
- remove obsolete build-stm-latest.sh script
- ci.sh: run apt-get update in ci_powerpc_setup
- makemanifest.py: allow passing flags to mpy-tool.py
- autobuild: add mimxrt port to build scripts for nightly builds
- pyboard.py: add cmd-line option to make soft reset configurable
- mpremote: swap order of PID and VID in connect-list output
- ci.sh: build unix dev variant as part of macOS CI
- ci.sh: build GENERIC_C3 board as part of esp32 CI
- autobuild: use separate IDF version to build newer esp32 SoCs
- autobuild: add FeatherS2 and TinyS2 to esp32 auto builds
- mpremote: add seek whence for mounted files
- mpremote: raise OSError on unsupported RemoteFile.seek
- autobuild: add the MIMXRT1050_EVKB board to the daily builds
- ci.sh: add mpy-cross build to nrf port
- codeformat.py: include ports/nrf/modules/nrf in code formatting
- gen-cpydiff.py: don't rename foo to ufoo in diff output
- autobuild: add auto build for Silicognition wESP32
- mpremote: fix connect-list in case VID/PID are None
- mpremote: add "devs" shortcut for "connect list"
- mpremote: remove support for pyb.USB_VCP in/out specialisation
- autobuild: don't use "-B" for make, it's already a fresh build
- pyboard.py: move --no-exclusive/--soft-reset out of mutex group
- pyboard.py: make --no-follow use same variable as --follow
- pyboard.py: add --exclusive to match --no-exclusive
- pyboard.py: make --no-soft-reset consistent with other args
- uncrustify: force 1 newline at end of file
- mpremote: bump version to 0.0.6

CI:
- workflows: add workflow to build and test javascript port
- workflows: switch from Coveralls to Codecov
- workflows: switch from lcov to gcov
- workflows: add workflow to build and test unix dev variant

The ports
=========

all ports:
- use common mp_hal_stdout_tx_strn_cooked instead of custom one
- update for move of crypto-algorithms, uzlib to lib
- rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID

bare-arm port: no changes specific to this component/port

cc3200 port: no changes specific to this component/port

esp8266 port:
- add __len__ to NeoPixel driver to support iterating
- Makefile: add more libm files to build
- include hidden networks in WLAN.scan results
- replace esp.neopixel with machine.bitstream
- remove dead code for end_ticks in machine_bitstream

esp32 port:
- boards/sdkconfig.base: disable MEMPROT_FEATURE to alloc from IRAM
- add __len__ to NeoPixel driver to support iterating
- main: allow MICROPY_DIR to be overridden
- esp32_rmt: fix RMT looping in newer IDF versions
- esp32_rmt: enhance RMT with idle_level and write_pulses modes
- add new machine.I2S class for I2S protocol support
- machine_spi: calculate actual attained baudrate
- machine_hw_spi: use a 2 item SPI queue for long transfers
- machine_dac: add MICROPY_PY_MACHINE_DAC option, enable by default
- machine_i2s: add MICROPY_PY_MACHINE_I2S option, enable by default
- fix use of mp_int_t, size_t and uintptr_t
- add initial support for ESP32C3 SoCs
- boards/GENERIC_C3: add generic C3-based board
- modmachine: release the GIL in machine.idle()
- mphalport: always yield at least once in delay_ms
- machine_uart: add flow kw-arg to enable hardware flow control
- boards: add Silicognition wESP32 board configuration
- mpconfigport.h: enable reverse and inplace special methods
- include hidden networks in WLAN.scan results
- makeimg.py: get bootloader and partition offset from sdkconfig
- enable MICROPY_PY_FSTRINGS by default
- machine_hw_spi: release GIL during transfers
- machine_pin: make check for non-output pins respect chip variant
- replace esp.neopixel with machine.bitstream
- remove dead code for end_ticks in machine_bitstream
- boards: add GENERIC_C3_USB board with USB serial/JTAG support

javascript port:
- rework Makefile and GC so it works with latest Emscripten
- Makefile: suppress compiler errors from array bounds
- Makefile: change variable to EXPORTED_RUNTIME_METHODS

mimxrt port:
- move calc_weekday helper function to timeutils
- machine_spi: add the SPI class to the machine module
- moduos: seed the PRNG on boot using the TRNG
- boards: set vfs partition start to 1 MBbyte
- main: skip running main.py if boot.py failed
- main: extend the information returned by help()
- mimxrt_flash: remove commented-out code
- modmachine: add a few minor methods to the machine module
- machine_led: use mp_raise_msg_varg helper
- machine_i2c: add hardware-based machine.I2C to machine module
- add support for Hyperflash chips
- boards: add support for the MIMXRT1050_EVKB board
- machine_pin: implement ioctl for Pin

minimal port:
- Makefile: add support for building with user C modules

nrf port:
- modules: replace master/slave with controller/peripheral in SPI
- boards/common.ld: calculate unused flash region
- modules/nrf: add new nrf module with flash block device
- drivers: add support for using flash block device with SoftDevice
- mpconfigport.h: expose nrf module when MICROPY_PY_NRF is set
- README: update README.md to reflect internal file systems
- mpconfigport.h: tune FAT FS configuration
- Makefile: add _fs_size linker script override from make
- modules/uos: allow a board to configure MICROPY_VFS_FAT/LFS1/LFS2
- mpconfigport.h: enable MICROPY_PY_IO_FILEIO when an FS is enabled
- qstrdefsport.h: add entries for in-built FS mount points
- main: add auto mount and auto format hook for internal flash FS
- boards: enable needed features for FAT/LFS1/LFS2
- facilitate use of freeze manifest
- boards: set FROZEN_MANIFEST blank when SD present on nrf51 targets
- modules/scripts: add file system formatting script
- Makefile: set default manifest file for all targets
- mphalport: add dummy function for mp_hal_time_ns()
- boards: enable MICROPY_VFS_LFS2 for all target boards
- modules/uos: add ilistdir to uos module
- modules/nrf: add function to enable/disable DCDC
- enable source line on tracebacks
- set .mpy features consistent with documentation and other ports

pic16bit port: no changes specific to this component/port

powerpc port: no changes specific to this component/port

qemu-arm port: no changes specific to this component/port

rp2 port:
- use 0=Monday datetime convention in RTC
- machine_rtc: in RTC.datetime, compute weekday automatically
- CMakeLists.txt: suppress compiler errors for pico-sdk and tinyusb
- tusb_config.h: set CFG_TUD_CDC_EP_BUFSIZE to 256
- machine_uart: add hardware flow control support
- machine_uart: allow overriding default machine UART pins
- machine_i2c: allow boards to configure I2C pins using new macros
- machine_spi: allow boards to configure SPI pins using new macros
- machine_uart: fix poll ioctl to also check hardware FIFO
- machine_uart: fix read when FIFO has chars but ringbuf doesn't
- tusb_port: allow boards to configure USB VID and PID
- boards/ADAFRUIT_FEATHER_RP2040: configure custom VID/PID
- boards/ADAFRUIT_FEATHER_RP2040: configure I2C/SPI default pins
- boards/SPARKFUN_PROMICRO: configure UART/I2C/SPI default pins
- boards/SPARKFUN_THINGPLUS: configure I2C/SPI default pins
- boards: add Adafruit ItsyBitsy RP2040
- boards: add Adafruit QT Py RP2040
- boards: add Pimoroni Pico LiPo 4MB
- boards: add Pimoroni Pico LiPo 16MB
- boards: add Pimoroni Tiny 2040
- CMakeLists.txt: allow a board's cmake to set the manifest path
- enable MICROPY_PY_FSTRINGS by default
- Makefile: add "submodules" target, to match other ports
- rp2_flash: disable IRQs while calling flash_erase/program
- CMakeLists.txt: add option to enable double tap reset to bootrom
- mpconfigport.h: allow boards to add root pointers

samd port:
- add support for building with user C modules

stm32 port:
- softtimer: add soft_timer_reinsert() helper function
- mpbthciport: change from systick to soft-timer for BT scheduling
- provide a custom BTstack runloop that integrates with soft timer
- usb: make irq's default trigger enable all events
- boardctrl: skip running main.py if boot.py had an error
- sdio: fix undefined reference to DMA stream on H7
- dma: add DMAMUX configuration for H7 to fix dma_nohal_init
- main: call mp_deinit() at end of main
- adc: allow using ADC12 and ADC3 for H7
- adc: define the ADC instance used for internal channels
- adc: simplify and generalise how pin_adcX table is defined
- add new machine.I2S class for I2S protocol support
- boards/NUCLEO_F446RE: fix I2C1 pin assignment to match datasheet
- replace master/slave with controller/peripheral in I2C and SPI
- systick: always POLL_HOOK when delaying for milliseconds
- sdram: make SDRAM test cache aware, and optional failure with msg
- boards/NUCLEO_F446RE: enable CAN bus support
- boards: add support for SparkFun STM32 MicroMod Processor board
- uart: fix LPUART1 baudrate set/get
- uart: support low baudrates on LPUART1
- boards/STM32F429DISC: set correct UART2 pins and add UART3/6
- boards/NUCLEO_F439ZI: add board definition for NUCLEO_F439ZI
- boards/LEGO_HUB_NO6: add board definition for LEGO_HUB_NO6
- Makefile: update to only pull in used Bluetooth library
- README.md: update supported MCUs, and submodule and mboot use
- usbd_desc: rename USBD_xxx descriptor opts to MICROPY_HW_USB_xxx
- usbd_cdc_interface: rename USBD_CDC_xx opts to MICROPY_HW_USB_xx
- powerctrl: support changing frequency on WB MCUs
- boards/NUCLEO_H743ZI2: add modified version of NUCLEO_H743ZI
- mbedtls: fix compile warning about uninitialized val
- enable MICROPY_PY_FSTRINGS by default
- add implementation of machine.bitstream
- Makefile: allow GIT_SUBMODULES and LIBS to be extended
- stm32_it: support TIM17 IRQs on WB MCUs
- disable computed goto on constrained boards
- storage: make extended-block-device more configurable
- boards/LEGO_HUB_NO6: change SPI flash storage to use hardware SPI
- boards/LEGO_HUB_NO6: skip first 1MiB of SPI flash for storage
- boards/LEGO_HUB_NO6: add make commands to backup/restore firmware

teensy port: no changes specific to this component/port

unix port:
- modffi: add option to lock GC in callback, and cfun access
- Makefile: add back LIB_SRC_C to list of object files
- variants: enable help and help("modules") on standard and dev
- Makefile: disable error compression on arm-linux-gnueabi-gcc

windows port:
- Makefile: add .exe extension to executables name
- appveyor: update to VS 2017 and use Python 3.8 for build/test

zephyr port:
- machine_spi: add support for hardware SPI
2021-10-15 08:20:54 -05:00
Dan Halbert a911cbef51 check that boot device is interface #0; remove instrumentation 2021-10-13 12:30:01 -04:00
Dan Halbert 75f1019436 Merge remote-tracking branch 'adafruit/main' into hid-boot-protocol 2021-10-13 09:40:45 -04:00
Radomir Dopieralski caa3d3726f Stage: add support for viewport scrolling 2021-10-09 00:05:49 +02:00
Jeff Epler 14ec6b70cf
Merge pull request #5403 from blues/add-strm32l4t5-swan-support
stm32l4r5 Swan support
2021-10-07 11:00:59 -05:00
Dan Halbert 1ae69b5cc5 debugging, with instrumentation 2021-10-07 08:19:53 -04:00
Radomir Dopieralski 57dee6406d _stage: Fix handling of scaled display in the stage library
The "scale" parameter wasn't exposed in the library, and there
were some problems in how it was handled.

This also fixes some types in the pixel-drawing functions.
2021-10-07 12:58:43 +02:00
Dan Halbert 24c6295ed4 Boot protocol and feature reports: compiles; needs to be tested 2021-10-04 22:48:18 -04:00
Matthew McGowan 295cc18190 style(swan_r5): pre-commit whitespace style changes 2021-09-28 18:52:03 -07:00
Matthew McGowan 7b7b4997a4 docs(swan_r5): misc comments/formatting 2021-09-28 18:52:02 -07:00
Brandon Satrom 48f67d007e feat: add Blues Swan R5 support
complete pin mapping for Feather pins

stubbed out files needed for complilation. still to be modified

0 out all CPY modules in mpconfigboard.mk until we get the build running

add csv for pin generation for STM32L4R5

add F4R5 references in peripherals files

refactored out board files BECAUSE I AM AN IDIOT; add L4 series system clocks file from CubeMX

took a guess at the number of USB endpoint pairs to get the build done

guess was close, but wrong. It is 8

clean up peripheral DEFs

Fixes build error:
```
In file included from ../../py/mpstate.h:33,
                 from ../../py/mpstate.c:27:
../../py/misc.h: In function 'vstr_str':
../../py/misc.h:196:1: sorry, unimplemented: Thumb-1 hard-float VFP ABI
 static inline char *vstr_str(vstr_t *vstr) {
 ^~~~~~
```
Sleuthing steps:
* verify that the feather_stm32f4_express board builds correctly
* put a `#error` at the bottom of the `mpstate.c` file.
* build for the feather and swan boards, with V=2 to capture the build command for that file.
* use a differencing tool to inspect the differences between the two invocations
* inspecting the differences, I saw a missing `-mcpu=cortex-m4` I tested by adding that to the Swan build command. The file built fine (stopping at the hard error, but no other warnings.)

A grep through the sources revealed where this flag was being set for the stm ports.

With this commit, the build gets further, but does not complete. The next exciting episode in this unfolding coding saga is just a commit away!

working build with minimal set of modules for the Blues Swan r5

chore:change header copyright name to Blues Wireless Contributors

USB operational.  Fixed up clocks to be hardwired for LSE no HSE case. (Trying to combine HSE in there made the code much more complex, and I don't have a board to test it out on.)

USART working

adds support for `ENABLE_3V3` and `DISCHARGE_3V3` pins.  I am surprised that pin definitions are quite low-level and don't include default direction and state, so the code currently has to initialize `ENABLE_3V3` pin as output.  The LED takes over a second to discharge, so I wonder if the board startup code is not having the desired affect.

short circuit implementation of backup memory for the STM32L4

all the ports

remove company name from board name to be consistent with the Arduino board definition.

add default pins for I2C, SPI and UART, so that `board.I2C` et al. works as expected.  Confirmed I2C timing.

fix board name

fix incorrect pin definition. add test to allow manual check of each output pin

analog IO

code changes for WebUSB. Doesn't appear to work, will revisit later.

ensure that `sys.platform` is available

checkin missing file

feat: make room for a larger filesystem so the sensor tutorial will fit on the device.

fix:(stm32l4r5zi.csv): merged AF0-7 and AF8-15 into single lines and removed extraneous headers mixed in with the data.

fix(parse_af_csv.py): pin index in the csv is 0 not 1, and AF index made 1 larger

chore(Swan R5): update peripherals pins from `parse_af_csv.py` output

optimize flash sector access
2021-09-28 18:52:02 -07:00
microDev 3da86b0ac2
add initial esp32c3 support 2021-09-26 09:39:40 +05:30
Jeff Epler 10fdc80b9c
Merge pull request #5378 from jepler/esp32s2-paralleldisplay-i2s
Espressif: Use i2s peripheral for parallel LCD displays
2021-09-23 20:25:43 -05:00
Michael Thomson 94ca3f594e Enable CS "active-high" device support
Reference https://github.com/adafruit/Adafruit_CircuitPython_BusDevice/issues/71

Add a new parameter cs_active_value for devices that require CS to use "active high" logic.

Update mpconfigboard.mk to disable pyb_nano_v2 from core build as its flash is too small now.
2021-09-23 09:14:39 +01:00
Jeff Epler a0cfceec28 Stub out the non-sequential parallel bus constructor
.. most boards can't support non-sequential pins, so share the
implementation of the error routine so we get an identical message.
2021-09-21 15:00:43 -05:00
Jeff Epler 72bfd39a17 keypad: Event: add timestamp.
this will probably need simplification before it fits on constrained
boards.
2021-09-16 21:08:05 -05:00
James Carr 56ecdee5a0
Correct the 24bit decoding in bitmaptools.readinto() 2021-09-13 19:50:35 +01:00
James Carr 145836e7e5
Make the x and y bounds checking functions static 2021-09-11 17:10:21 +01:00
James Carr 2bc260a102
Rework of changes to bounds checking of location in VectorShape, moving most of the code into shared-module. 2021-09-10 21:48:01 +01:00
James Carr c6f2dae591
Remove unused varg part of Error calls. 2021-09-10 09:39:20 +01:00
James Carr 1f446916c3
Improve the bounds checking on the location (the x, y co-ordinates) of a
VectorShape object so that it is consistent no matter where it is set from:
 * the constructor
 * the x and y setters
 * the location setter
2021-09-10 09:39:12 +01:00
Scott Shawcroft 771b4c7464
Add two space saving knobs
* Reduce the number of supported HID reports of IDs per descriptor.
  This saves ~200 bytes in the default HID objects.
* (Not enabled) Compute QSTR attrs on init. This trades 1k RAM for
  flash. Flash is the default (1).
2021-08-31 13:02:34 -07:00
Jeff Epler 83120eb1b2 Actually fix building ports without parallel displays 2021-08-29 11:49:47 -05:00
Jeff Epler 7520feed1c Move ParallelBus to its own module 2021-08-29 07:33:54 -05:00
Dan Halbert dd89ff244d
Merge pull request #5249 from dhalbert/usb_hid-gc-fix
Fix usb_hid_gc_collect()
2021-08-27 19:27:55 -04:00
Scott Shawcroft b17216d9d4
Merge pull request #5199 from aramcon-badge/aramcon/quick-refresh
Adding quick refresh support
2021-08-27 08:54:44 -07:00
Dan Halbert 29ae444dc6 Fix usb_hid_gc_collect() 2021-08-27 11:36:56 -04:00
Amit Sides 98f026fbb4 Fixing comments for PR 2021-08-25 15:07:19 -07:00
microDev 8c2a16e65c
Merge pull request #5207 from lesamouraipourpre/pixel-luma
Remove the `pixel_luma` parameter from `compute_tricolor`
2021-08-24 12:28:10 +05:30
Dan Halbert 7587a521cb
Merge pull request #5145 from FoamyGuy/bitmaptools_paint_fill
Bitmaptools boundary_fill
2021-08-23 16:20:38 -04:00
Scott Shawcroft 6d49a9f0c5
Merge pull request #5205 from jepler/deprecate-vertical-scroll
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 12:52:12 -07:00
microDev 57b4d0176f
Merge pull request #5077 from microDev1/atexit
Add atexit module
2021-08-23 19:49:46 +05:30
Jeff Epler 379461df7d Deprecate Display's constructor arg set_vertical_scroll 2021-08-23 09:17:59 -05:00
foamyguy 80c7a15df7 fix dirty area initial points 2021-08-22 10:52:28 -05:00
James Carr cba71ea157
Remove `displayio_copy_coords`. It is a duplicate of `displayio_area_copy` 2021-08-22 10:58:39 +01:00
foamyguy 0f478d59fe remove string import. use minimum sized dirty area 2021-08-21 16:15:59 -05:00
Amit Sides 1b6283a5ae Adding quick refresh support 2021-08-21 23:51:24 +03:00
foamyguy aeeba3904b changed argument names and make replaced_color_value argument optional 2021-08-21 11:08:25 -05:00
James Carr 16a0306e29 Remove the pixel_luma parameter from displayio_colorconverter_compute_tricolor (Closes #5194)
Not tested, I don't currently have a three colour eInk screen to test with.
2021-08-21 16:32:36 +01:00
microDev 25437dcb33
Merge branch 'main' into atexit 2021-08-20 09:45:54 +05:30
Dan Halbert 5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes
Support multiple reports per device in usb_hid
2021-08-17 17:14:28 -04:00
Dan Halbert 1bcf66ff8d Check buffer existence in tud callbacks (addresses #5020) 2021-08-17 15:34:48 -04:00
Jeff Epler d67acb8a64 MP3Decoder: Fix playback stopping issue
Closes: #5164
2021-08-17 10:03:47 -05:00
Dan Halbert 38f42818e9 fix gc; update KEYBOARD report descriptor
The default KEYBOARD report descriptor had a signed/unsigned error,
and also could have allowed more keycodes. So I changed it, using the
very vanilla descriptor from a very plain extremely common commercial
keyboard, modifying it only have 5 LED's instead of 3, and added a
report ID.
2021-08-16 18:59:41 -04:00
microDev bdf8bc58ed
allow exception raise inside atexit callback 2021-08-16 22:35:04 +05:30
microDev 1c4a6c3667
atexit module refinements
- add test for atexit module
- add callback to gc collection
- fix callback memory allocation
- execute callback on both code and repl exit
2021-08-16 21:37:32 +05:30
foamyguy 6f783060c2 ignore points outside of bitmap 2021-08-15 19:11:15 -05:00
Dan Halbert f37e1d7bf5 squeeze a couple of boards 2021-08-14 17:36:05 -04:00
Dan Halbert 3dc2b4c2d3 at least original functionality with new API 2021-08-14 12:36:40 -04:00
Dan Halbert 4f8ff12afa wip 2021-08-14 12:36:40 -04:00
foamyguy ec8b31e7b4 code format and translations 2021-08-13 10:13:38 -05:00
foamyguy c1e164e1ff rename to boundary_fill and clean up comments 2021-08-13 09:52:51 -05:00
foamyguy 0bbb0f1d06 Merge branch 'adafruit_main' into bitmaptools_paint_fill 2021-08-13 09:49:24 -05:00
Scott Shawcroft de796e2304
Move OneWire to `onewireio` from `busio`
This will allow finer grained inclusion in 8.0.0

Fixes #5135
2021-08-12 10:47:14 -07:00
Scott Shawcroft ebf0901558
Merge pull request #5079 from dhalbert/debug-audio
Fix various RP2040 and SAMD audio issues
2021-08-11 11:19:53 -07:00
Dan Halbert 24e61a7da8 Track more carefully which audio buffers to fill, based on interrupt channels 2021-08-10 22:00:09 -04:00
microDev 93c9d59960
Merge branch 'main' into getpass 2021-08-10 01:00:10 +05:30
microDev 3495cc1ff6
Merge pull request #5110 from jepler/format-exception
Implement `traceback.format_exception`
2021-08-10 00:47:18 +05:30
Kattni c87d90ec4b
Merge pull request #5090 from WarriorOfWire/draw_protocol
Draw protocol
2021-08-09 15:04:36 -04:00
foamyguy fd372cf06c it works! 2021-08-09 13:15:58 -05:00
Dan Halbert 2451c788f4 valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad 2021-08-09 09:47:13 -04:00
foamyguy 87358f81b2 trying to check next pixel 2021-08-09 08:30:12 -05:00
Jeff Epler c1ffab7476 Reduce code duplication in traceback module 2021-08-09 08:27:28 -05:00
Jeff Epler bfea6947e5 Improve mp_printf with support for compressed strings
* The new nonstandard '%S' format takes a pointer to compressed_string_t
   and prints it

 * The new mp_cprintf and mp_vcprintf take a format string that is a
   compressed_string_t
2021-08-09 08:27:28 -05:00
microDev 51f8603783
add getpass module 2021-08-09 17:50:28 +05:30
Kenny cf2712d23f transposing and mirroring work
* fix absolute_transform dirtying early instead of after the change, missing the draw
* fix transpose and mirror. (0,0) -> location in all vector shapes now in all rotations.
2021-08-08 17:01:36 -07:00
Kenny 7eece7d959 dirty area computed for non-transposed but at least d-1 2021-08-08 15:35:36 -07:00
foamyguy 158048e56b trying to make lists 2021-08-08 14:33:07 -05:00
foamyguy 6d57f43eb3 try adding print 2021-08-08 09:34:52 -05:00
foamyguy bcfec10552 starting bitmaptools.paint_fill 2021-08-08 09:31:09 -05:00
Kenny 9897ac6b5c yet more failures of local pre-commit to find that which github pre-commit does 2021-08-08 00:25:17 -07:00
Kenny a1fff320fb add location property to vectorshape and all composed shapes 2021-08-08 00:14:53 -07:00
Kenny bb25aeee51 fix code formatting that pre-commit --all-files did not locally report 2021-08-07 19:40:07 -07:00
Kenny 051d7a970e fix rotation and mirroring
now works with all vector shapes, even those with internal reference locations
that are negative. All shape locations are anchored to their 0,0 but they can
display pixels from negative coordinates if the shape's location on the screen
would have room for it.
2021-08-07 19:32:02 -07:00
Kenny b5837b157d improve transpose and mirror
* add heuristic to avoid drawing area unnecessarily
* fix Polygon.points
* fix transpose
* fix mirror x and y

Known broken:
Polygon with negative Y coordinates does not work right.
2021-08-07 19:31:22 -07:00
microDev 063e3946d6
Merge pull request #5094 from jepler/quirc
Add qrio: Decode QR codes with quirc lib
2021-08-07 09:30:20 +05:30
Scott Shawcroft be2342f32f
Merge pull request #5072 from microDev1/traceback
Add traceback module
2021-08-06 12:10:17 -07:00
Jeff Epler 67551c1ac0 qrio: Split QRInfo & PixelPolicy to their own .c/.h files 2021-08-06 09:53:17 -05:00
Jeff Epler 2e8eb43dcc Use new quirc define for small stacks
.. and revert stack enlargement of esp32-s2
2021-08-05 12:52:43 -05:00
microDev 870f26bfc4
traceback module refinements 2021-08-05 20:11:15 +05:30
Jeff Epler bd903f2f03 Add qrio: Decode QR codes with quirc lib 2021-08-04 09:16:00 -05:00
Kenny 8c22993e28 fix linter 2021-08-02 20:38:37 -07:00
Kenny 8607cdd783 vectorio: add draw protocol
* Removes VectorShape from user python interactions
* Re-integrates vectorio with displayio behind draw protocol implementations
* Implements draw protocol with VectorShape
* Composes VectorShape behaviors into Rectangle, Circle and Polygon
* Fixes terrible pixel garbage being left behind
* Improves redraw performance (heuristically) by tracking dirty area separately from current area.

Known Issues:
It does not work with transposed views.
2021-08-02 20:19:54 -07:00
Scott Shawcroft 1e225610cc
Add ability to disable BLE workflow
Call `supervisor.disable_ble_workflow()` and the BLE workflow will
be disabled until the chip is reset.

This also includes a couple fixes:
1. Terminals can now be deinit by setting the tilegrid to NULL. This
  prevents using the tilegrid before display is init.
2. Fix BLE serial send amount when sending more than a single packet.

Fixes #5049
2021-08-02 18:37:19 -07:00
Kenny 1b67b91edd fix inverted logic 2021-07-31 16:59:44 -07:00
Kenny 0afd863224 vectorio: palettes don't color dirty rectangles
This is a breaking change with previous palette semantic with respect to python code that uses vectorio.
Displayio has breaking changes in cpy 7 for Group's removal of max_size parameter so this is as good a
time as any to break everything.

Currently:
To color vectorio shapes correctly you have to pass in a palette with length 2. Palette[0] must be set transparent and palette[1] must be the color you want.

New:
To color vectorio shapes correctly you pass in a palette with length >= 1. Palette[0] will be the color of the shape.

Also improves pixels per second when skipping areas that aren't covered by the shape.
2021-07-31 16:32:01 -07:00
microDev a3998d0626
add atexit module 2021-07-30 09:32:28 +05:30
microDev f371c0a609
add traceback module 2021-07-28 18:06:23 +05:30
Dan Halbert 901a6c27c0 remove gamepad; deprecate gamepadshift 2021-07-26 22:15:09 -04:00
Scott Shawcroft f84cb94819
Remove OSError(0) and old network modules
The newer modules are `socketpool` and `ssl`.

Fixes #3924, related to #2021, closes #1880, closes #2273, closes #2274
2021-07-21 17:33:40 -07:00
Dan Halbert f1d2eee58f Make KeyMatrix row output switch faster 2021-07-21 09:08:32 -04:00
Jeff Epler 2556fce862 OnDiskBitmap: Fix memory corruption when using palette image
The number of palette entries set was accidentally 4x too much,
because the wrong looping variable was used.
2021-07-19 09:25:26 -05:00
microDev 40b085746a
Merge pull request #5006 from tannewt/scanentry_match_all
ScanEntry.matches() kwarg all -> match_all
2021-07-18 09:45:58 +05:30
Kattni Rembor c21e16162c Remove _ from common_hal__adafruit_pixelbuf. 2021-07-16 14:08:39 -04:00
Kattni Rembor dc2907ac1b Rename _pixelbuf to adafruit_pixelbuf, alias. 2021-07-16 13:31:40 -04:00
Scott Shawcroft 448597b4a0
ScanEntry.matches() kwarg all -> match_all
Related to #3007
2021-07-15 14:36:57 -07:00
Scott Shawcroft 0fadf028ef
Create first BLE-only board, Micro:Bit v2
This fixes build issues with USB off, tweaks the README to allow
for BLE-only boards and adds the Micro:Bit v2 definition.

Fixes #4546
2021-07-14 09:55:51 -07:00
Kattni Rembor 4579bf9b12 Rename rainbow to rainbowio 2021-07-12 14:40:01 -04:00
Kattni Rembor 825a706135 Turn off MIDI on one build, fix name. 2021-07-08 17:31:10 -04:00
Kattni Rembor 289575a811 Adding rainbow module. 2021-07-08 15:55:13 -04:00
Dan Halbert c37f354d2d
Merge pull request #4958 from dhalbert/rp2040-audio-fixes
RP2040 PWMAudioOut: Release DMA channels after play has finished
2021-07-02 10:03:54 -04:00
Dan Halbert 33bbb8b1f4 RP2040 PWMAudioOut: Release DMA channels after play has finished. 2021-07-01 17:36:29 -04:00
Jeff Epler d83a21b984 ColorConverter: Add "BGR" color modes.
The BGR565_SWAPPED mode is needed for OV2640 cameras.
2021-06-30 10:29:31 -05:00
Dan Halbert 62aca944f4 Failed to advance buffer ptrs in usb_cdc.Serial properly 2021-06-25 09:50:31 -04:00
Scott Shawcroft 57f898b774
Merge pull request #4915 from Neradoc/fix-4193
Fix 4193 - set hidden_by_parent when adding to displayio group
2021-06-24 15:23:33 -07:00
Scott Shawcroft b81573d439
Merge pull request #4891 from dhalbert/keypad-scanning-events
keypad: support for vector and matrix key scanning
2021-06-24 10:25:21 -07:00
Neradoc 63bcee0a2c set hidden_by_parent when adding to displayio group 2021-06-24 17:19:06 +02:00
Dan Halbert 4f538b6c09 remove pressed() and get_states_into() 2021-06-23 15:10:38 -04:00
Dan Halbert 7774b18895 Add reset() to scanners. Clear .overflow on EventQueue.clear(). 2021-06-23 15:04:09 -04:00
Dan Halbert acf90fbb43 many renamings; add overflowed flag to EventQuque 2021-06-23 09:57:15 -04:00
Dan Halbert f052dc4d8b ShiftRegisterKeys: allow specifying sense of latch 2021-06-21 19:50:05 -04:00
Dan Halbert 51c547a5b9 add generic arg validation routines; add interval args to keypad 2021-06-21 12:13:39 -04:00
Dan Halbert 154e91ab85 add EventQueue.store_next() to allow reusing event objects 2021-06-21 08:18:06 -04:00
Dan Halbert 8cd7e774e7 add KeyMatrix columns_to_anodes arg 2021-06-18 12:03:47 -04:00
Dan Halbert af66931f71 Added keypad.ShiftRegisterKeys 2021-06-17 20:51:45 -04:00
Dan Halbert a152bd3b72 add .num_keys and .store_states() to Keys and KeyMatrix 2021-06-17 12:02:54 -04:00
Dan Halbert cd31136c30 factor out keypad.EventQueue 2021-06-16 15:55:54 -04:00
Dan Halbert 3d18c5c327 Use a single list of keypad scanners 2021-06-16 13:29:38 -04:00
Dan Halbert 1803a6a71d both Keys and KeyMatrix work 2021-06-15 11:15:09 -04:00
Dan Halbert 350652ee21 Keys works; more testing to do 2021-06-14 22:59:17 -04:00
Dan Halbert 32eec85230 compiles 2021-06-14 20:54:43 -04:00
Dan Halbert 627c426259 wip 2021-06-14 16:00:15 -04:00
Dan Halbert 01a8a95b2c fix signed/unsigned compilation problem 2021-06-10 01:14:16 -04:00
Dan Halbert d3d9e0a487 add debouncing 2021-06-10 00:07:23 -04:00
Tsutomu IKEGAMI 0a7c839c13 Fix format (expand tab) 2021-06-10 12:11:12 +09:00
Tsutomu IKEGAMI 72c4a5a523 Fix coordinate conversion algorithm of partial refresh area in displayio.TileGrid 2021-06-10 11:47:51 +09:00
Dan Halbert 7d23206018 Inital keypad work: Keys working: one pin per key
keypad.Buttons and keypad.State

Buttons -> Keys; further work

wip

wip

wip: compiles

about to try

keypad.Keys working
2021-06-08 20:27:31 -04:00
lady ada 467a4e7664 fix comment 2021-06-07 19:51:57 -04:00
lady ada b39dd84560 move the col/row offsets to the top so oleds can take advantage of em 2021-06-07 19:43:49 -04:00
lady ada 2ff9e9766f handclang 2021-06-07 12:39:59 -04:00
lady ada 8f1c25c8ae fix SH110x mode, the SH1107 is actually column not row mode BUT the SD1107 module we use is vertical orientation (confusing!) so row/col are NOT swapped. we will have to fix the SH1107 driver to match. this fix required for SH1106 (which uses the same page mode commands but ISNT rotated) 2021-06-06 18:25:40 -04:00
Tsutomu IKEGAMI a4be61912c Fix move cursor esc sequence of terminalio to meet ANSI standard 2021-06-03 20:40:37 +09:00
Dan Halbert 3930440bc5 Fix usb_cdc.enable(console=False, data=True) 2021-06-02 11:29:56 -04:00
Scott Shawcroft 6ee9acc900
Merge pull request #4755 from jepler/esp32s2-protomatter
Esp32s2 protomatter
2021-06-01 13:32:34 -07:00
Jeff Epler 9df8f235b1 OnDiskBitmap: INCOMPATIBLE CHANGE: Allow them to use palettes
Before, when an OnDiskBitmap was a paletted bitmap type, the palette
was internal to the OnDiskBitmap, and it internally performed the palette
conversion itself.  When using with a tilegrid, a ColorConverter() object
always had to be passed.

Now, an OnDiskBitmap has a "pixel_shader" property.  If the bitmap is
a paletted bitmap type, it is a (modifiable) Palette object.  Otherwise,
it is a ColorConverter() object as before. This allows palette effects
to be applied to paletted OnDiskBitmaps.

Code that used to say:
```python
face = displayio.TileGrid(odb, pixel_shader=displayio.ColorConverter())
```
must be updated to say:
```python
face = displayio.TileGrid(odb, pixel_shader=odb.pixel_shader)
```

Compatible code for 6.x and 7.x can say
```python
face = displayio.TileGrid(odb, pixel_shader=getattr(odb, 'pixel_shader', ColorConverter())
```
2021-05-28 10:53:21 -05:00
Jeff Epler 9ff6ccba48 remove commented-out code 2021-05-27 11:33:17 -05:00
Jeff Epler 11288c1c28 esp32s2: Add rgbmatrix support 2021-05-26 11:21:59 -05:00
Jeff Epler 0d7f257eae displayio: Pause rgbmatrix during soft-reset
We can't handle rgbmatrix's interrupts from here until the display is
reinitialized, so set the display as paused.

With this change, I can survive multiple cycles with wifi+rgbmatrix
on an esp32s2.  Before, it usually failed.
2021-05-26 11:18:02 -05:00
Dan Halbert 0f66832829
Merge branch 'main' into hid_devices-gc 2021-05-24 18:17:52 -04:00
Scott Shawcroft 0d92558012
Merge pull request #4800 from dhalbert/too-many-hid-devices
Handle too many HID devices properly
2021-05-24 14:26:41 -07:00
Dan Halbert 5a9b95e611 unlock board.I2C() on reset 2021-05-21 17:49:50 -04:00
Dan Halbert c6eb0283dc Don't set num_hid_devices before it's validated 2021-05-21 17:34:30 -04:00
Dan Halbert 5a81f275cf Don't change number of HID devices until it's vetted 2021-05-21 17:29:21 -04:00
Dan Halbert 7d0cda2614 gc all pointers in hid_devices properly 2021-05-21 16:32:55 -04:00
Scott Shawcroft 5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led 2021-05-20 08:35:15 -07:00
Dan Halbert aebee2de73 Handle USB_HIGHSPEED for MIDI also 2021-05-19 07:43:47 -04:00
Kamil Tomaszewski da248d1594 spresense: Fix USB CDC and MSC 2021-05-18 17:02:16 +02:00
Dan Halbert fa6c06fb38 count in/out endpoints; allow more usb modules on low-endpoint boards 2021-05-13 21:59:02 -04:00
Scott Shawcroft 1a0b4193b7
Simplify the status LED to save power
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
2021-05-13 14:41:20 -07:00
Scott Shawcroft a70fc0caee
Merge pull request #4744 from tannewt/merge_1.14
Merge MicroPython 1.14
2021-05-11 16:11:58 -07:00
Scott Shawcroft e02a26453c
Merge MicroPython 1.14 into CircuitPython 2021-05-11 15:07:40 -07:00
ajs256 3c8b8cdba7 `make translate` 2021-05-10 16:57:38 -07:00
ajs256 7cd8e98962 Make two error messages sentence case 2021-05-10 16:51:13 -07:00
Dan Halbert f504af3127 fix HID; fix interface name table creation 2021-05-09 00:42:45 -04:00
Jeff Epler 5e06c91244
Merge pull request #4716 from tyomitch/main
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
Scott Shawcroft 42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13 2021-05-06 11:17:53 -07:00
Artyom Skrobov 908d83d1f2 s/Circuit Python/CircuitPython/g
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
Scott Shawcroft 3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod 2021-05-05 17:51:52 -07:00
Dan Halbert adc3d7d55e update Python API according to review comments 2021-05-03 22:29:02 -04:00
Dan Halbert d2b558993e merge from main, including MicroPython 1.12 merge 2021-05-03 20:56:04 -04:00
Dan Halbert 5b5de4b92e fix sHID report doc and API 2021-05-03 20:53:31 -04:00
Scott Shawcroft b35fa44c8a
Merge MicroPython 1.12 into CircuitPython 2021-05-03 14:01:18 -07:00
Dan Halbert be7b2b00a8 uncrustify with newer version of uncrustify 2021-04-30 10:40:12 -04:00
Dan Halbert 71a8cadb09 working! 2021-04-29 22:26:38 -04:00
Dan Halbert abfb020d41 MSC, CDC, HID keyboard definitely working 2021-04-29 17:41:43 -04:00
Dan Halbert f06d54524d merge from adafruit 2021-04-28 23:48:26 -04:00
Dan Halbert 587aedd14f rework storage allocation 2021-04-28 13:00:44 -04:00
Dan Halbert 8500e846c6 partially working 2021-04-27 23:53:23 -04:00
Dan Halbert f98a54628b wip: compiles 2021-04-27 14:37:36 -04:00
Scott Shawcroft 17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
Dan Halbert 7a40b4daec very much WIP 2021-04-26 23:54:01 -04:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
Dan Halbert c26e49c2e6 wip: starting to try to compile 2021-04-25 23:17:41 -04:00
Dan Halbert 9d1fcc3b14 merge from main 2021-04-25 10:27:52 -04:00
Dan Halbert aea3c4d3ab wip 2021-04-25 10:23:59 -04:00
Dan Halbert 2ba2574ebf
Merge pull request #4619 from tyomitch/microbit
[build] Allow USB to be set to 0
2021-04-24 10:31:29 -04:00
Dan Halbert 556a126917 wip: getting closer 2021-04-23 21:44:13 -04:00
Scott Shawcroft 80e8b4ac14
Merge pull request #4635 from jepler/pcc
WIP: Implement 'ParallelImageCapture' for samd51
2021-04-23 13:31:53 -07:00
Artyom Skrobov 4e3c1d4a4c [build] Allow USB to be set to 0
Unify USB-related makefile var and C def as CIRCUITPY_USB.

Always define it as 0 or 1, same as all other settings.

USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.

Loosely related to #4546
2021-04-23 11:13:34 -04:00