djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
24,860 Commits 21 Branches 274 Tags 785 MiB
e07bce2bf1
Commit Graph

1799 Commits

Author SHA1 Message Date
Dan Halbert
6abe3cd0ef -Os for SAMD51; fix CSUPEROPT typo 2020-12-14 18:57:31 -05:00
Thea Flowers
fe32dd08b8 Update Big Honking Button configuration to support its newest board revision. 
v5 of the BHB board has:

* GD25Q64C instead of the GD25Q16C.
* Pin PB10 tied to ground for board revision detection.
 2020-12-12 19:16:35 -05:00
Scott Shawcroft
344d3c59cb
Merge branch 'main' into msgpack 2020-12-11 11:10:30 -08:00
Scott Shawcroft
0b4bcd9599
Fix build and more comments 2020-12-08 13:05:21 -08:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep 
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
 2020-12-08 10:52:25 -08:00
Scott Shawcroft
1130b80e2a
Merge pull request #3612 from gamblor21/bus_device 
Moving Adafruit_CircuitPython_BusDevice to core
 2020-12-02 13:23:02 -08:00
Scott Shawcroft
608c98501b
Merge remote-tracking branch 'adafruit/main' into msgpack 2020-12-02 13:10:39 -08:00
Scott Shawcroft
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep 
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
 2020-12-02 12:51:43 -08:00
gamblor21
cb863e4c5c Added to partial builds where frozen removed 2020-12-01 22:19:48 -06:00
Bernhard Boser
59c3e25168
disable on boards tight on memory. add stddef.h to imports (not actually needed). 2020-12-01 18:39:24 -08:00
Dan Halbert
8b7c23c1ee address review comments 2020-12-01 20:01:14 -05:00
Mark
237385798c
Merge branch 'main' into bus_device 2020-12-01 15:47:16 -06:00
Scott Shawcroft
a975ef4971
Merge pull request #3695 from cwalther/movable 
Add movable supervisor allocations
 2020-11-30 16:00:55 -08:00
Scott Shawcroft
98cf7f67d4
Merge pull request #3773 from dhalbert/no-samd21-complex-arithmetic 
Disable complex arithmetic on SAMD21 builds to make space
 2020-11-30 13:47:56 -08:00
Dan Halbert
dbfabddf58 rename ESP TX and RX pins; remove support 2020-11-30 11:11:04 -05:00
Dan Halbert
9768951a2a Disable complex arithmetic on SAMD21 builds to make space 2020-11-29 15:34:38 -05:00
Dan Halbert
848eb28132 esp-uart-pins 2020-11-28 14:52:56 -05:00
Christian Walther
c7404a3ff8 Add movable allocation system. 
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.

By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
 2020-11-28 17:50:23 +01:00
Dan Halbert
28d9e9186e Disable complex arithmetic on SAMD21 builds to make space 2020-11-28 10:12:46 -05:00
Dan Halbert
104a089677 deep sleep working; deep sleep delay when connected 2020-11-26 22:06:37 -05:00
Dan Halbert
ef0830bfe2 merge from upstream + wip 2020-11-25 17:52:06 -05:00
Jeff Epler
e778fc1f87
Merge pull request #3741 from hathach/fix-cdc-connection-race 
update tinyusb to fix cdc connection race
 2020-11-24 19:11:41 -06:00
Scott Shawcroft
8364734ba3
Merge pull request #3749 from skerr92/add-cpsapling-spiflash 
Add cpsapling spiflash
 2020-11-24 15:22:21 -08:00
Jeff Epler
c451b22255 Disable 3-arg pow() function on m0 boards 
`pow(a, b, c)` can compute `(a ** b) % c` efficiently (in time and memory).
This can be useful for extremely specific applications, like implementing
the RSA cryptosystem.  For typical uses of CircuitPython, this is not an
important feature.  A survey of the bundle and learn system didn't find
any uses.

Disable it on M0 builds so that we can fit in needed upgrades to the USB
stack.
 2020-11-24 16:54:33 -06:00
Seth Kerr
686edcef3f fixing PID issues with CI Test (whoops) 2020-11-24 07:41:32 -05:00
Seth Kerr
e5cee98977 removing icy tree files/directory 2020-11-23 19:31:06 -05:00
Seth Kerr
2635132ce5 adding 'haxpress' kind of build for CP Sapling for use with SPI Flash 2020-11-23 19:21:12 -05:00
Scott Shawcroft
491e314799
Merge pull request #3718 from jepler/epd-rotation 
EPaperDisplay: add rotation property
 2020-11-23 15:04:26 -08:00
Dan Halbert
a0f1ec3c4a wip 2020-11-22 19:10:09 -05:00
Dan Halbert
75559f35cc wip: ResetReason to microcontroller.cpu 2020-11-21 23:29:52 -05:00
Seth Kerr
1c92b1bf61 forgot to run pre-commit local 2020-11-20 15:35:52 -05:00
Seth Kerr
c4f4cdd8c1 readding cp_sapling directory 2020-11-20 15:31:49 -05:00
Seth Kerr
29e91424d4 removing cp sapling temporarily to read 2020-11-20 15:29:35 -05:00
Seth Kerr
b69bbfa3d6 fixed issues with trailing whitespace check 2020-11-20 15:17:44 -05:00
Seth Kerr
0a06530d52 adding CP-Sapling 2020-11-20 15:06:57 -05:00
Jeff Epler
aaca3eccf1 samd: PDMIn: Reduce code unrolling on samd21 only 
Instead of unrolling the code 16 times, unroll it 4 times and loop
over it 4 times.  This gives the same 16 iterations, but at an expense
of less flash space.
 2020-11-19 16:19:37 -06:00
Jeff Epler
0556f9f851 Revert "samd21: Enable terse error reporting on resource constrained chip family" 
This reverts commit 9a642fc049.
 2020-11-19 15:12:56 -06:00
Jeff Epler
9a642fc049 samd21: Enable terse error reporting on resource constrained chip family 
This reclaims over 1kB of flash space by simplifying certain exception
messages.  e.g., it will no longer display the requested/actual length
when a fixed list/tuple of N items is needed:

        if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
            mp_raise_ValueError(translate("tuple/list has wrong length"));
        } else {
            mp_raise_ValueError_varg(translate("requested length %d but object has length %d"),
                (int)len, (int)seq_len);

Other chip families including samd51 keep their current error reporting
capabilities.
 2020-11-18 20:37:36 -06:00
Dan Halbert
ffff02c053 Merge remote-tracking branch 'adafruit/main' into sleep 2020-11-16 12:06:11 -05:00
Dan Halbert
bb77f1d130 wip: initial code changes, starting from @tannewt's sleepio branch 2020-11-16 11:56:20 -05:00
Scott Shawcroft
bda3267432
Save flash space 
* No weak link for modules. It only impacts _os and _time and is
  already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
  M0 Express.
* Change ejected default to false to move it to BSS. It is set on
  USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
  RAM.
 2020-11-13 18:57:52 -08:00
Scott Shawcroft
68eb809fbf
Update parallel bus signatures 2020-11-13 18:57:52 -08:00
Scott Shawcroft
c9952798fb
Merge pull request #3683 from BHDynamics/dynossat_edu 
Rename pins on dynossat_edu_eps to make them the same as the Arduino core
 2020-11-12 12:33:16 -08:00
Enrique Casado
aa68b17223 Freed some more space 2020-11-12 13:26:26 +01:00
Enrique Casado
9774736a50 Rename pins to make them the same as the Arduino core 2020-11-12 12:30:34 +01:00
gamblor21
23ed3ef971 Removing frozen libs 2020-11-11 11:36:04 -06:00
gamblor21
f61c4e62c1 Removing from smaller builds 2020-11-11 10:24:33 -06:00
Dan Halbert
36a8828fa3
Merge pull request #3632 from dhalbert/add-binascii 
add binascii to most builds
 2020-11-05 16:16:41 -05:00
Scott Shawcroft
e02539bdf5
Merge pull request #3633 from ITACAInnovation/patch-2 
Update pins.c
 2020-11-04 10:30:09 -08:00
ITACA Innovation S.R.L
ca935c0daf
Update pins.c 
Changed builtin to standard
 2020-11-03 21:22:19 +01:00
Scott Shawcroft
441c2c41fb
Merge pull request #3641 from adafruit/6.0.x 
Merge 6.0.x bugfixes to main
 2020-11-03 09:46:44 -08:00
Dan Halbert
1f7a3f0dfa Rev C Feather M4 CAN pin changes 2020-11-02 15:28:30 -05:00
Brian Dean
041c2a9f61 .../boards/bdmicro_vina_d51: PAD updates for better resource flexibility. 2020-11-02 08:35:25 -05:00
ITACA Innovation S.R.L
4e52757f26
Update pins.c 
Added LED, BOOST_EN and VEXT_SELECT pins.
 2020-11-01 22:22:55 +01:00
Dan Halbert
72b829dff0 add binascii to most builds 2020-11-01 14:52:03 -05:00
Jerry Needell
1762a36438 restore analogio to feather_m0_rfm9x/rfm69 builds 2020-11-01 05:46:13 -05:00
Dan Halbert
144eb131ae
Merge pull request #3627 from adafruit/6.0.x 
Merge 6.0.x bugfixes to main
 2020-10-31 12:28:20 -04:00
ITACA Innovation S.R.L
9a8484b853
Update mpconfigboard.h 
Removed ignore PA30 PA31 in order to allow using them as pinout
 2020-10-31 11:06:56 +01:00
ITACA Innovation S.R.L
a7616808e9
Updated pinout 2020-10-31 10:12:49 +01:00
Dan Halbert
59b9ca409c matrixportal ESP TX and RX pins were swapped 2020-10-28 20:33:10 -04:00
microDev
930cf14dce
Add check for invalid io, function to disable all alarms 2020-10-27 16:17:26 -07:00
microDev
e35938971a
Add description of alarm modules 2020-10-27 16:16:55 -07:00
Scott Shawcroft
54c0e98a37
Fix openbook build 2020-10-27 13:58:23 -07:00
Jeff Epler
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x 
Merge in two fixes from 6.0.x
 2020-10-21 20:12:20 -05:00
Scott Shawcroft
1a677406bf
Merge pull request #3529 from jensechu/color-converter-transparency 
displayio: Pass transparent_color to ColorConverter
 2020-10-20 10:41:57 -07:00
Scott Shawcroft
8beb36c240
Use one lto partition 
This leads to smaller code size at the expense of slower linking.

We can turn partitioning back on with GCC10 because it produces smaller code.
 2020-10-20 09:24:03 -07:00
Christian Walther
1eab0692b5 Fix missing nproc on macOS. 
396979a breaks building on macOS: `nproc` is a Linux thing, use a cross-platform alternative.
 2020-10-20 16:39:32 +02:00
Scott Shawcroft
eb139c9bab
Correct pins to not reset. 
They must have the PORT_ prefix otherwise they mask the wrong pins.

Fixes #3552
 2020-10-19 17:41:16 -07:00
Jeff Epler
cc411f47eb samd: Update peripherals submodule 
(https://github.com/adafruit/samd-peripherals/pull/37)
 2020-10-17 20:08:32 -05:00
Jeff Epler
fb768dfc14 samd: AnalogOut: Better handle boards which IGNOREd analog pins 2020-10-17 20:08:32 -05:00
Jeff Epler
194d99f588 sparkfun_lumidrive: Can't IGNORE pins that are default bus pins 
The SDA, SCL, and MISO pins were ignored.  This error was not diagnosed
before now.
 2020-10-17 20:08:32 -05:00
Jeff Epler
eb0b023dee samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins 2020-10-17 20:08:32 -05:00
Jeff Epler
4b9fc5de53 samd: update peripherals submodule 
this is possible now that the undefined reference to pin_PA30 has been
resolved.
 2020-10-17 20:08:32 -05:00
Jeff Epler
aa3c890ead samd: pin: Fix 'undefined reference to pin_PA30' 
.. when PA30 is IGNOREd
 2020-10-17 20:08:32 -05:00
Jeff Epler
396979a67e atmel-samd: parallelize lto linking 
This decreases the link time, especially on desktop machines with many CPU
cores.  However, it does come at a slight cost in binary size, making the flash
section about 200 bytes bigger for circuitplayground_express.

Before, linking build-circuitplayground_express/firmware.elf takes
8.8s elapsed time, leaving 3128 bytes free in flash.

After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed
time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free)

If necessary, we can make this per-board or even per-translation to squeeze full
builds.
 2020-10-17 20:08:32 -05:00
Scott Shawcroft
878f2322e7
Merge pull request #3564 from BHDynamics/dynossat_edu 
Add DynOSSAT-EDU boards
 2020-10-16 11:30:42 -07:00
Enrique Casado
6631c8d393 Add USB VID&PID 2020-10-16 13:52:46 +02:00
Dan Halbert
12ed3fc72f disable on winterbloom_sol and thunderpack 2020-10-15 18:48:28 -04:00
Dan Halbert
f51e75c1d2 cxd56 needed more precise include for __packed; needed SRC_C += on some ports 2020-10-15 15:24:24 -04:00
Dan Halbert
82b49afe43 enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit 2020-10-15 11:27:21 -04:00
Enrique Casado
97fae54659 Add DynOSSAT-EDU boards 2020-10-15 12:39:14 +02:00
Dan Halbert
f1e8f2b404
Merge pull request #3554 from gamblor21/move_ordereddict 
Moved ORDEREDDICT define to central location
 2020-10-14 22:39:04 -04:00
gamblor21
0a9bcc538b Removed ordered dict for all SAMD21 2020-10-14 20:15:21 -05:00
Brian Dean
852a91e1b7 boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen). 2020-10-14 08:29:28 -04:00
Limor "Ladyada" Fried
e9c04bc1f0
Merge pull request #3550 from bd34n/bdmicro_vina_d51 
Add new board to atmel-samd port: bdmicro_vina_d51
 2020-10-13 23:15:25 -04:00
gamblor21
4270061db4 Moved ORDEREDDICT define to central location 2020-10-13 18:52:27 -05:00
Brian Dean
2b33968a1e Add new board to atmel-samd port: bdmicro_vina_d51 2020-10-13 16:46:25 -04:00
Scott Shawcroft
2bc40bcadf
Remove readreq when changing continuous 2020-10-13 10:15:34 -07:00
Scott Shawcroft
379e73af2e
Finer grained, per port tick locking 
Fixes #3504 hopefully.
 2020-10-12 18:43:21 -07:00
Scott Shawcroft
bb046f9983
Merge pull request #3540 from WarriorOfWire/async_syntax 
__await__ magic method and async/await
 2020-10-12 15:31:43 -07:00
Kenny
10badd93c3 leftover newlines 2020-10-11 22:52:27 -07:00
Kenny
94beeabc51 remove unnecessary board configuration and address feedback 2020-10-11 22:42:59 -07:00
Kenny
3c46e3a6aa
Turn off async for circuitplayground express 
Firmware too large
 2020-10-11 08:16:36 -07:00
warriorofwire
f5f1e29dc0 disable async/await on a several small ucontrollers 2020-10-10 15:43:12 -07:00
Radomir Dopieralski
3f6ca7bd32 Make end-of-line-fixer happy 2020-10-10 23:59:44 +02:00
Radomir Dopieralski
b227b79dec Fix #3504: Don't use time module in pew.tick() 
The time.sleep() and time.monotonic() functions break the timer
interrupt on which PewPew10 display relies, so we can't use them
anymore. Instead I'm adding a time-keeping function to the display
code itself, which then can be used in pew.tick() internally.
 2020-10-10 20:26:33 +02:00
lady ada
70a94c8d2d fix for https://github.com/adafruit/circuitpython/issues/3534 2020-10-10 12:27:35 -04:00
Scott Shawcroft
3ccf644dd0
Fix autoreload on SAMD21 
The issue was that a time.sleep() would set the RTC wake up
further into the future even if we wanted to tick every ms. Ticking
every ms is used to time the autoreload delay and without it,
autoreload doesn't work.

Fixes #3528
 2020-10-09 12:53:00 -07:00
gamblor21
085d2a2274 Update submodule to merge commit 2020-10-07 14:09:26 -05:00
Jeff Epler
16ed875f4e canio: remove unused fields 
these relate to properties that were removed as well
 2020-10-06 20:14:50 -05:00
Scott Shawcroft
d62ac24493
Merge pull request #3469 from jepler/noreturn 
Add some NORETURN attributes
 2020-10-01 11:18:36 -07:00
Scott Shawcroft
5ac3c36d64
Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107 
New quirk for sh1107
 2020-09-30 12:03:10 -07:00
Jeff Epler
c129c8f296 Merge remote-tracking branch 'origin/main' into canbus-api-changes 2020-09-29 20:15:11 -05:00
Jeff Epler
2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate 
Update make translate script
 2020-09-29 14:32:49 -05:00
Jeff Epler
611f81ac1a canio: actually drop the _error_count properties 
thanks @tannewt
 2020-09-29 14:25:53 -05:00
microDev
4c7d9e3aaf
Update make translate script 2020-09-29 11:14:30 +05:30
Jeff Epler
726dcdb60a Add some NORETURN attributes 
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
    // precondition: you already verified that a slot was available
    for (int i=0; i<NUM_SLOTS; i++) {
        if( slot_free(i)) {
            return i;
        }
    }
    safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.

So I started by teaching the compiler that reset_into_safe_mode never returned.  This leads at least one level deeper due to reset_cpu needing to be a NORETURN function.  Each port is a little different in this area.  I also marked reset_to_bootloader as NORETURN.
Additional notes:

 * stm32's reset_to_bootloader was not implemented, but now does a bare reset.  Most stm32s are not fitted with uf2 bootloaders anyway.
 * ditto cxd56
 * esp32s2 did not implement reset_cpu at all.  I used esp_restart().  (not tested)
 * litex did not implement reset_cpu at all.  I used reboot_ctrl_write.  But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested).  reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
 * cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
 * In several places, NVIC_SystemReset is redeclared with NORETURN applied.  This is accepted just fine by gcc.  I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
 * the stub safe_mode reset simply aborts.  This is used in mpy-cross.
 2020-09-28 18:55:56 -05:00
mdroberts1243
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107 2020-09-28 19:40:47 -04:00
Jeff Epler
f4e36fc7f6 CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field 2020-09-28 17:22:00 -05:00
Jeff Epler
3e97e9c4be canio: Listener: shuffle function declarations around 2020-09-28 17:22:00 -05:00
Jeff Epler
48bda589b8 Listerner: read -> receive, drop readinto 
This prepares for creating a separate RemoteTransmissionRequest class
 2020-09-28 17:22:00 -05:00
Jeff Epler
79ca430ddf Match: address -> id 2020-09-28 17:22:00 -05:00
Anson He
96323ac3ac Default power on Wio Terminal's 40 Pin 2020-09-27 10:21:25 +08:00
Jeff Epler
791d20f16c give qtpy haxpress its own USB PID 2020-09-26 11:45:53 -05:00
Jeff Epler
9944935fde qtpy haxpress: enable RTC 2020-09-26 11:33:10 -05:00
Mark Roberts
22a7696fac Changes take 2: missed ugame10 board 2020-09-25 22:17:59 -04:00
Mark Roberts
b921543571 Requested changes take 1 2020-09-25 21:27:29 -04:00
Jeff Epler
eadb4de144 qtpy_m0_haxpress: add 2020-09-24 16:58:24 -05:00
Scott Shawcroft
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0 
fix pins for rev C
 2020-09-23 11:31:28 -07:00
lady ada
9db7625717 neopix is default on! 2020-09-23 11:19:01 -04:00
lady ada
5384479a61 fix pins for rev C 2020-09-22 23:28:23 -04:00
Jeff Epler
59580d0f2d canio: Fix implementation bugs in atmel-sam 2020-09-22 09:36:29 -05:00
Jeff Epler
4869dbdc67 canio: rename from _canio 
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
 2020-09-21 16:44:26 -05:00
Jeff Epler
9e8f1820c8 canio.CAN: switch rx/tx, make both mandatory, move declarations around 2020-09-21 16:44:26 -05:00
Jeff Epler
4e4853dcb2 common.template.ld: remove unneeded line 2020-09-21 16:44:26 -05:00
Jeff Epler
df379b84cb remove unneeded symbols 2020-09-21 16:44:26 -05:00
Jeff Epler
7fd6cab2ac canio: Make both tx and rx (but not both) optional 
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification

.. docstring & comment improvements
 2020-09-21 16:44:26 -05:00
Jeff Epler
09f8a83a75 samd: template.ld: put canram in its own output section 2020-09-21 16:44:26 -05:00
Jeff Epler
a76119afcb add _canio to Feather M4 CAN 2020-09-21 16:44:26 -05:00
Jeff Epler
67d8f108bb Add CAN to SAM E51 clock config 2020-09-21 16:44:26 -05:00
Jeff Epler
44c5b2bbb1 Respond to review comments 
Thanks @tannewt!
 2020-09-21 16:44:26 -05:00
Jeff Epler
58b920ed97 fix whitespace 2020-09-21 16:44:26 -05:00
Jeff Epler
27cbb690e5 _canio: Add listener matching 
Lightly tested:
 * no matches (catch-all)
 * standard address single address matches (even and odd positions)
 * standard address mask matches
 * only tested that extended doesn't match non-extended
 2020-09-21 16:44:26 -05:00
Jeff Epler
635fcadb59 _canio.CAN: add error handling & bus state 2020-09-21 16:44:26 -05:00
Jeff Epler
a2e1867f69 _canio: Minimal implementation for SAM E5x MCUs 
Tested & working:

 * Send standard packets
 * Receive standard packets (1 FIFO, no filter)

Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.

Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
 2020-09-21 16:44:26 -05:00
Jeff Epler
183649aad8 samd: move mcu_find_pin_function to header 
.. it'll be used in can as well as sdio
 2020-09-21 16:44:07 -05:00
Dan Halbert
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21 
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
 2020-09-19 13:41:21 -04:00
Dan Halbert
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4 
samd: SPI: improve conditional code
 2020-09-18 19:14:39 -04:00
Dan Halbert
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1 
sdioio: fix code for the case where there is no SDHC1
 2020-09-18 17:10:59 -04:00
Dan Halbert
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage 
sam e54: disable microcontroller.cpu.voltage
 2020-09-18 15:20:43 -04:00
Jeff Epler
45eec5b5a5 samd: SPI: improve conditional code 
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4.  However, the problem was in our SPI code.

A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.

Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.

Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.

Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
 2020-09-17 18:30:22 -05:00
Jeff Epler
c73182803d sdioio: fix code for the case where there is no SDHC1 
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
 2020-09-17 18:29:31 -05:00
Jeff Epler
1b29ceaf1a sam e54: disable microcontroller.cpu.voltage 
This hangs, and the usual workarounds didn't work.
 2020-09-17 18:27:43 -05:00
Scott Shawcroft
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid 
Automate USB VID/PID Uniqueness Check
 2020-09-17 11:48:46 -07:00
Brian Dean
81ee874531 pins.c: fix trailing whitespace 2020-09-16 16:40:04 -04:00
Brian Dean
847d609ddc rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately 2020-09-16 16:27:24 -04:00
Jeff Epler
1fc797132a
Merge pull request #3237 from DavePutz/issue3216 
Issue#3216 - Needed an alternate way to check if background tasks were run
 2020-09-16 08:47:33 -05:00
Scott Shawcroft
95e27bb8bf
Add more PIDs for unique boards 2020-09-15 13:43:35 -07:00
Dan Halbert
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can 
atmel-samd: add same51, feather_m4_can
 2020-09-14 23:57:51 -04:00
Jeff Epler
067a975875 update submodules to merge commits 2020-09-14 17:22:30 -05:00
DavePutz
2a2a8d6457
Merge pull request #28 from adafruit/main 
Merge from adafruit/main
 2020-09-14 16:50:40 -05:00
DavePutz
2eca4ee902
Update PulseIn.c 2020-09-14 11:04:45 -05:00
DavePutz
c014ac3089
Reworked check for input taking too long 2020-09-14 10:54:57 -05:00
Jeff Epler
af24c8ae06 Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic 
Conflict in locale/circuitpython.pot resolved with 'make translate'
 2020-09-13 14:21:21 -05:00
Jeff Epler
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode 
Add esp32s2 safe mode support & fix user_safe_mode output
 2020-09-13 14:18:59 -05:00
Jeff Epler
90f7340bfc move implicit-fallthrough warning enable to defns.mk 2020-09-13 13:13:09 -05:00
microDev
36da92075b Update safe mode reason 2020-09-13 22:57:24 +05:30
microDev
5deac8d249 Update board specific safe mode message 2020-09-13 18:22:40 +05:30
lady ada
2fac4851a5 fix typo, tested hardware, neopixel doesnt work tho 2020-09-12 19:56:13 -04:00
lady ada
6fff4ec00d cutie variant 2020-09-12 19:00:26 -04:00
Jeff Epler
01fdd9598a disable iimplicit-fallthrough warning inside asf4 
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes)  I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
 2020-09-12 17:48:42 -05:00
Jeff Epler
5729097bc4 atmel-samd: enable build error for implicit fallthrough 
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate.  I only tested a few builds (trinket m0
and metro m4 express)
 2020-09-12 15:11:29 -05:00
Jeff Epler
cacb0124ac feather_m4_express: Use quad data mode on flash 
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.

Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
 2020-09-10 20:20:21 -05:00
Scott Shawcroft
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296 
Correction for Issue #3296 - ble hanging on nrf52840
 2020-09-10 12:36:17 -07:00
Jerry Needell
2529ee2359 freeze rfm69 and bus_device libraries int feather_m0_rfm69 2020-09-09 14:54:20 -04:00
Jeff Epler
b49099c8f3 additional asf4 updates 2020-09-08 15:31:13 -05:00
Jeff Epler
e066448e36 atmel-samd: add same51, feather_m4_can 
This is compile-tested, and requires updates in the related submodules:

https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37

This should not be merged until those can also be merged.
 2020-09-08 13:06:45 -05:00
root
2690faec43 Moved checks for invalid pin to common-hal/microcontroller/Pin.c 2020-09-05 11:42:06 -05:00
Dan Halbert
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c 
fix pins for trellis_m4 board.I2C()
 2020-09-04 11:15:18 -04:00
Dan Halbert
960888a3bd fix pins for trellis_m4 board.I2C() 2020-09-03 14:22:18 -04:00
Scott Shawcroft
786f4ed114
Merge pull request #3344 from jepler/issue-3184 
Fix RGBMatrix, FrameBufferDisplay bugs
 2020-09-02 15:32:30 -07:00
Scott Shawcroft
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci 
_bleio HCI implementation
 2020-09-01 11:28:05 -07:00
Jeff Epler
952d9bbb4a samd: Ignore a maybe-uninitialized diagnostic in asf4 
I encountered this when changing optimization flags for debugging
purposes.  The diagnostic appears spurious and unrelated to what
I'm debugging.
 2020-09-01 10:55:45 -05:00
Jeff Epler
ad4bf75367 samd: only set NDEBUG for non-debug builds 2020-09-01 10:55:45 -05:00
Dan Halbert
4ac7650f22 matrix portal board 2020-08-31 23:56:38 -04:00
Dan Halbert
6dbd369272 merge from upstream 2020-08-30 14:39:03 -04:00
lady ada
81870413af add default I2C 2020-08-28 19:08:36 -04:00
Lucian Copeland
8021da08d3 Fix problematic whitespace on pulseout parameter errors 2020-08-27 11:07:47 -04:00
Scott Shawcroft
0cc438e6b9
Fix pycubed pwm use 2020-08-24 18:29:34 -07:00
root
fe0f79adce Making requested modifications 2020-08-21 20:38:19 -05:00
Scott Shawcroft
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio 2020-08-21 11:13:53 -07:00
Dan Halbert
58573a70e1 bring submodules up to date 2020-08-21 11:10:33 -04:00
Dan Halbert
f714f53552 Merge remote-tracking branch 'adafruit/main' into ble_hci 2020-08-21 10:45:05 -04:00
Dan Halbert
0e30dd8bcc merge from upstream; working; includes debug_out code for debugging via Saleae for posterity 2020-08-20 20:29:57 -04:00
Jeff Epler
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory 
Update mini sam m4 memory
 2020-08-20 19:05:39 -05:00
root
6eae7ce78f Requested changes to pulsein 2020-08-20 16:57:00 -05:00
Benjamin Shockley
135626a038
Update mpconfigboard.mk 
Added support for second type of memory chip.
 2020-08-20 13:50:52 -05:00
Scott Shawcroft
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout 
ESP32-S2: Add PulseOut and PulseIn
 2020-08-20 11:24:08 -07:00
Scott Shawcroft
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors 
Add usb-endpoint-count checking
 2020-08-20 11:21:01 -07:00
Scott Shawcroft
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family 
SAM E54: Use correct CFG_TUSB_MCU
 2020-08-20 11:13:05 -07:00
Jeff Epler
23aefe9509 Add usb-endpoint-count checking 
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value.  Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
 2020-08-19 16:47:40 -05:00
Jeff Epler
6ae5bedf3b SAM E54: Use correct CFG_TUSB_MCU 
This doesn't actually change the code that is built, but it is
"more correct".
 2020-08-19 11:27:52 -05:00
Scott Shawcroft
6857f98426
Split pulseio.PWMOut into pwmio 
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.

Fixes #3211
 2020-08-18 13:08:33 -07:00
Lucian Copeland
da75445cd5 Style changes, reposition runtime errors 2020-08-18 11:42:06 -04:00
Scott Shawcroft
d01f5dc0bd
Turn off terminalio for ja and ko 
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.

The serial output will work as usual.
 2020-08-17 17:17:59 -07:00
Brent Rubell
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x 
RFM9x -- freeze library into build
 2020-08-17 17:11:35 -04:00
Dan Halbert
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50 
The ja translation was not fitting.
 2020-08-17 10:05:25 -04:00
Lucian Copeland
0fc730bc5a Expand PulseOut API, debug cleanup 2020-08-14 16:36:02 -04:00
Dan Halbert
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size 
Squeeze firmwares to fit the new ja translation
 2020-08-13 12:19:28 -04:00
Jeff Epler
239c8ff87f metro_m0_express: put back audiobusio 
this now fits locally (though it's very close to capacity);
let's see what the CI says.

```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express  TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
 2020-08-12 19:11:33 -05:00
Scott Shawcroft
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2 
Sharp Memory Display displayio support (v2)
 2020-08-12 16:53:09 -07:00
Jeff Epler
aa0b4f7045 cpx_display: Put back AUDIOBUSIO, take away ROTARYIO 
AUDIOBUSIO is needed for the on-board mic using PDMIn
 2020-08-12 16:17:48 -05:00
Jeff Epler
ea8e9b8cef metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO 
Dan notes that this is more frequently the solution we've chosen
 2020-08-12 16:17:13 -05:00
Jeff Epler
299894025a stringcar_m0_express: make ja translation fit 2020-08-12 13:47:10 -05:00
Jeff Epler
f08ee0db20 itsybitsy_m0_express: make ja translation fit again 2020-08-12 13:44:00 -05:00
Jeff Epler
7bd42244c9 snekboard: make ja translation fit 2020-08-12 13:34:36 -05:00
Jeff Epler
45f6bc1f3e serpente: make ja translation fit 2020-08-12 13:32:08 -05:00
Jeff Epler
36bfbaae69 feather_radiofruit_zigbee: make ja translation fit 2020-08-12 13:28:30 -05:00
Jeff Epler
58a1361d3e Merge remote-tracking branch 'origin/main' into ja-firmware-size 2020-08-12 13:26:12 -05:00
Jeff Epler
813dcd1b73 trinket_m0_haxpress: make ja translation fit 2020-08-12 12:44:17 -05:00
Jeff Epler
88f222f1a1 metro_m0_express: make ja translation fit 2020-08-12 12:38:17 -05:00
Jeff Epler
ba91023fff itsybitsy_m0_express: make ja translation fit 2020-08-12 12:35:29 -05:00
Jeff Epler
6b9f7c9047 hallowing_m0_express: make ja translation fit 2020-08-12 12:29:30 -05:00
Jeff Epler
58afda342d feather_m0_supersized: make ja translation fit 2020-08-12 11:53:34 -05:00
Jeff Epler
27c2eb1869 feather_m0_express: make ja translation fit 2020-08-12 11:51:56 -05:00
Jeff Epler
8865e4ca97 circuitplayground_express_displayio: make ja translation fit 2020-08-12 11:46:52 -05:00
Jeff Epler
f3748fe20d circuitbrains_basic_m0: Use optimization flags to let ja translation fit 2020-08-12 11:46:31 -05:00
Jeff Epler
f9d1d9d114 atmel-samd: disable FRAMEBUFFERIO on samd21 
.. this disables SHARPMEMORY as well.
 2020-08-12 11:15:34 -05:00
Jeff Epler
454e616d13 atmel-samd: disable FRAMEBUFFERIO on samd21 
.. this disables SHARPMEMORY as well.
 2020-08-12 10:46:56 -05:00
bleeptrack
49407b6c06 trailing spaces fix 2020-08-12 13:42:45 +02:00
bleeptrack
e34fac6645
Whitespace and Newline fix 2020-08-11 23:59:32 +02:00
bleeptrack
228d9b5a12
Fixing indentation 2020-08-11 22:18:15 +02:00
bleeptrack
22ae1dbac8
Removing unnecessary pin ignored 2020-08-11 22:17:17 +02:00
bleeptrack
00676ff5a9
PicoPlanet 2020-08-11 21:49:52 +02:00
Jeff Epler
1cf3762392 Merge remote-tracking branch 'origin/main' into stm32-sdioio 2020-08-10 12:54:12 -05:00
Jerry Needell
1d980d527e Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x 2020-08-07 12:48:41 -04:00
Jerry Needell
f7961b96a9 update comment 2020-08-06 10:05:18 -04:00
Jerry Needell
c42ffb8f3d remove usb_hid 2020-08-06 05:44:26 -04:00
Jerry Needell
432f43a472 freeze rfm9x and BusDevice, remove many built-in modules 2020-08-05 11:37:57 -04:00
root
c7b6e66426 Fixes for pulsein tick handling 2020-08-05 10:03:20 -05:00
Jeff Epler
93b373d617 "pop from empty %q" 
Saves 12 bytes code on trinket m0
 2020-08-04 18:42:09 -05:00
Dan Halbert
ac95106b88 service discovery works; need to work on char and descriptor discovery 2020-08-04 18:24:37 -04:00
Jeff Epler
c849b781c0 Combine 'index out of range' messages 2020-08-04 14:45:45 -05:00
Jeff Epler
dddd25a776 Combine similar strings to reduce size of translations 
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used.  The net savings on trinket_m0 is
just 32 bytes.

It also means that the translation will include the original English
text, and cannot be translated.  These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
 2020-08-04 13:34:29 -05:00
Jeff Epler
0e2d231445 Merge remote-tracking branch 'origin/main' into stm32-sdioio 2020-08-03 21:01:53 -05:00
Dan Halbert
a995a5c58f wip: partial discovery responses; compiles; not tested 2020-08-03 21:02:57 -04:00
DavePutz
d7eedc5e38
Merge pull request #20 from adafruit/main 
Update from main
 2020-08-03 13:14:01 -05:00
root
9203a77804 Turn off interrupts while in handler 2020-08-03 11:31:12 -05:00
Dan Halbert
0a60aee3e4 wip: compiles 2020-08-02 11:36:38 -04:00
root
12b81618a3 Changes for getting supervisor ticks 2020-08-01 13:27:02 -05:00
Dan Halbert
1771858f4a add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes 2020-08-01 13:20:46 -04:00
Dan Halbert
4b71831d8b
SUPEROPT_VM = 0 for de_DE 2020-08-01 12:36:20 -04:00
Jeff Epler
27c6ffb9a2 atmel-samd: gemma, trinket: Make space for de_DE translation 2020-07-30 11:29:47 -05:00
Jeff Epler
d69f081c04 Merge remote-tracking branch 'origin/main' into blm_badge 2020-07-30 07:24:48 -05:00
Jeff Epler
af135a7560 atmel-samd: move samd-specific script 2020-07-30 07:18:02 -05:00
Joey Castillo
8acec2ca35 add descriptive pin names 2020-07-29 13:49:08 -04:00
Joey Castillo
ea9bc9b4b6 set screen orientation to portrait 2020-07-29 13:46:10 -04:00
Dan Halbert
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins 
fluff_m0: add pin aliases
 2020-07-28 15:15:15 -04:00
Dan Halbert
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals 
Use samd peripherals fixed for gcc 10
 2020-07-28 15:14:20 -04:00
Scott Shawcroft
b30d89131b
Merge pull request #3215 from ansonhe97/main 
Added display QSTR to Wio Terminal
 2020-07-28 11:53:17 -07:00
Dan Halbert
aa97ea2501 Merge remote-tracking branch 'adafruit/main' into blm_badge 2020-07-28 14:15:02 -04:00
Scott Shawcroft
92216d6417
Use samd peripherals fixed for gcc 10 2020-07-28 11:14:25 -07:00
Dan Halbert
e5e132a364 add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT 2020-07-28 11:49:54 -04:00
ansonhe97
e15bcebb6e Added display QSTR to Wio Terminal 2020-07-28 17:31:17 +08:00
Jerry Needell
945736e9bb add adjustments for crickit and displayio variants of CPX 2020-07-27 22:13:04 -04:00
Jerry Needell
2bdd62220e adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice 2020-07-27 21:50:36 -04:00
Scott Shawcroft
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2 
ndgGarage ndbit6 v2
 2020-07-27 15:51:23 -07:00
Scott Shawcroft
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations 
More type hints
 2020-07-27 14:26:54 -07:00
Taku Fukada
d356581651 Fix several type hints 2020-07-27 18:05:13 +09:00
Radomir Dopieralski
b2c4b0bcfa fluff_m0: don't exclude portb pins explicitly 2020-07-26 17:26:32 +02:00
Radomir Dopieralski
b1b253c012 fluff_m0: add pin aliases 
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.

Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
 2020-07-26 13:39:42 +02:00
Dan Halbert
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test 
Changes to allow different compiler optimizations per board
 2020-07-25 17:03:10 -04:00
Dan Halbert
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2 
Add GamePad to Commander board
 2020-07-25 16:57:58 -04:00
Chris Burton
c4a5297ee2 Add GamePad to Commander 2020-07-25 17:53:27 +00:00
ikigaisense
6696915801 fix-ndbit6-for-ndbit6_v2 2020-07-25 10:07:33 -06:00
root
c4817968ee Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test 2020-07-24 23:28:41 -05:00
DavePutz
3dfed3c4aa
Merge pull request #15 from adafruit/main 
update from main
 2020-07-24 20:29:53 -05:00
root
739981b34e update for pewpew 2020-07-24 17:27:25 -05:00
DavePutz
a14101cd13
Use current mpconfigboard.mk with optimization change 2020-07-24 14:09:09 -05:00
root
b9cdf195e2 board mk file changes 2020-07-24 10:00:42 -05:00
Taku Fukada
54a342a7f5 Add and correct some type hints 2020-07-24 18:20:03 +09:00
root
c937fa1760 fix formatting 2020-07-23 19:29:57 -05:00
root
778e8bfda9 Changes to optimization option 2020-07-23 19:27:02 -05:00
ikigaisense
703fb9d4a1 update-ndGarage_ndbit6_v2 2020-07-23 16:08:30 -06:00
Scott Shawcroft
2bd6d05663
Add externs. GCC10 complains about duplicate defines 2020-07-22 16:26:46 -07:00
root
d83a4ac72d Changes to add compiler optimization option 2020-07-22 12:44:41 -05:00
DavePutz
39e01c3938
Merge pull request #14 from adafruit/main 
update from main
 2020-07-22 11:30:49 -05:00
Scott Shawcroft
8ff2846bb2
Disable countio on circuitbrains basic 2020-07-21 16:21:49 -07:00
Scott Shawcroft
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack 
Enable PYSTACK to keep function state out of the heap
 2020-07-21 13:38:52 -07:00
Scott Shawcroft
5e3a853db4
Turn off GC opt on uchip board 2020-07-21 12:51:59 -07:00
Scott Shawcroft
678faff464
Be more aggressive with uChip build 2020-07-21 11:02:23 -07:00
root
49decf90c9 Add option for higher optimization levels 2020-07-21 10:11:08 -05:00
Scott Shawcroft
0c6935e336
Merge branch 'main' into disable_network 2020-07-20 16:28:22 -07:00
Scott Shawcroft
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc 
Add _bhb user module for Big Honking Button
 2020-07-20 16:24:36 -07:00
Thea Flowers
7ba89f5330 Add _bhb user module for Big Honking Button 
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
 2020-07-18 22:45:08 -07:00
Radomir Dopieralski
11ef43b071 pewpew_m4: Disable USB_HID back 
German translation fails to build, so I have to disabled USB_HID after
all.
 2020-07-18 20:09:30 +02:00
Radomir Dopieralski
8d692f33a8 pewpew_m4: Enable analogio and usb_hid 
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.

If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
 2020-07-18 19:30:40 +02:00
Scott Shawcroft
610e0171aa
Disable existing native networking. 
We're moving towards a co-processor model and a Wiznet library is
already available.

New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
 2020-07-17 17:43:02 -07:00
Jeff Epler
6912d31560 uchip: reclaim some flash space 2020-07-17 14:32:05 -05:00
Jeff Epler
1df48176ce supervisor: factor supervisor_background_tasks from sundry ports 2020-07-15 11:49:44 -05:00
Jeff Epler
6160d11c5a supervisor: factor out, Handle USB via background callback 2020-07-15 11:49:44 -05:00
Jeff Epler
742aa740f6 samd: audio: Move to background callback 
Testing performed: Played half of the Bartlebeats album :) :)
 2020-07-15 09:26:47 -05:00
Scott Shawcroft
51c888d4be
Merge pull request #3003 from Flameeyes/master 
License tagging according to REUSE specifications.
 2020-07-13 16:28:49 -07:00
Dan Halbert
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level 
SAMD: make the brownout detection level configurable per board
 2020-07-13 16:26:11 -04:00
Dan Halbert
f6869c69c5 wip: advertising; not tested 2020-07-12 19:45:23 -04:00
Radomir Dopieralski
742f9cfdb0 Fluff M0: additional pins on version 1.3 of the board 2020-07-10 20:40:58 +02:00
Radomir Dopieralski
e0733d153e SAMD: configurable brownout, separate the variables 2020-07-09 12:17:07 +02:00
Radomir Dopieralski
83a27edd20 SAMD: make the brownout detection level configurable per board 
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.

In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
 2020-07-08 19:59:53 +02:00
Scott Shawcroft
965a4961ce
Merge pull request #3120 from DavePutz/issue#3049 
Issue#3049 -PulseIn not working in CP5.4
 2020-07-07 08:59:22 -07:00
DavePutz
0932b64ae7
Correct for SAMD51 build 2020-07-06 23:25:33 -05:00
DavePutz
1b3cb17abd
Corrected file for SAMD51 build 2020-07-06 21:47:11 -05:00
DavePutz
ab4a453006
Made requested changes 2020-07-06 21:40:38 -05:00
Scott Shawcroft
846f01b2c8
Merge pull request #3113 from ansonhe97/main 
ADD: Added Wio Terminal's functional pins and LCD driver to board init
 2020-07-06 14:50:47 -07:00
Diego Elio Pettenò
34b4993d63 Add license to some obvious files. 2020-07-06 19:16:25 +01:00
Radomir Dopieralski
2f80460a2f Fluff M0: additional pins on version 1.3 of the board 2020-07-06 19:15:41 +01:00
DavePutz
ac33c3fe2c
Implementation of continuous synchronization of RTC during pulsein 
Flags and code to implement continuous synchronization of RTC during pulsein
 2020-07-04 21:17:19 -05:00
DavePutz
94d90742dd
Implementation of RTC continuous synchronization during pulsein 
Flags and code to implement RTC continuous synchronization during pulsein
 2020-07-04 21:15:38 -05:00
ndgarage
e514782cc6 update-with-new-usb-PID 2020-07-04 10:39:21 -06:00
ansonhe97
36ef3476de Fix depreciate terminology 2020-07-04 11:21:58 +08:00
ansonhe97
2ecb46f192 Fix CI 2020-07-03 13:42:27 +08:00
ansonhe97
2a92cf8d8b ADD: Added LCD driver to board init 2020-07-03 12:44:20 +08:00
ansonhe97
49aacc8596 ADD: Fixed wrong SPI pins and added more functional pins 2020-07-03 12:43:21 +08:00
Scott Shawcroft
4d7b9cde33
Merge pull request #3109 from pewpew-game/fluff_m0 
Fluff M0: additional pins on version 1.3 of the board
 2020-07-02 15:43:32 -07:00
Radomir Dopieralski
fce35c3481 Fluff M0: additional pins on version 1.3 of the board 2020-07-02 22:57:58 +02:00
Jeff Epler
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio 
Add busio support for the ESP32-S2
 2020-07-01 21:02:08 -05:00
ndgarage
0537f4e775 restore-ndgarage_ndbit6-to-original 2020-07-01 14:12:52 -06:00
ndgarage
c759c9a2aa add-ndgarage_ndbit6_v2-update 2020-07-01 13:58:07 -06:00
svgops
b80dbb4b2c add-ndgarage_ndbit6_v2 2020-07-01 12:06:59 -06:00
ansonhe97
d4e28dd233 ADD: added more special pins on Wio Terminal 2020-07-01 17:06:26 +08:00
Dan Halbert
11cb3e3b4b hci skeleton done; not working yet 2020-06-30 23:19:40 -04:00
Scott Shawcroft
74ad5e80ce
Merge pull request #3089 from ansonhe97/main 
Add: added Seeed's Wio Terminal Board Support
 2020-06-30 10:58:24 -07:00
ansonhe97
4613f80d7a Fix end of line 2020-06-29 17:41:48 +08:00
ansonhe97
0dd17f4418 Add: Added Seeed Wio Terminal board support 2020-06-29 16:22:41 +08:00
Jeff Epler
c5db97c50f atmel-sam: sdio: disable debug prints by default 2020-06-26 13:16:16 -05:00
Jeff Epler
f496c0b58d atmel-samd: Add SDIO SD card interface 2020-06-26 11:50:42 -05:00
Jeff Epler
d4b9458512 samd: sdio: Add needed files from atmel start 2020-06-26 11:50:41 -05:00
Jeff Epler
57fde2e07b sdcardio: implement new library for SD card I/O 
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot

This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
 2020-06-26 11:50:23 -05:00
Dan Halbert
3e616ccead update submodules 2020-06-26 12:21:57 -04:00
Dan Halbert
759929c24a hci early wip; refactor supervisor bluetooth.c for nrf: tested 2020-06-25 20:57:17 -04:00
Jeff Epler
1d2cc0b968 I2CPeripheral: Rename class and its module 
This is an incompatible change.
 2020-06-25 11:44:19 -05:00
Jeff Epler
076a96ccc6
Merge pull request #3046 from jepler/same51 
Add basic SAM E54  support and SAM E54 Xplained board
 2020-06-25 06:55:27 -05:00
Scott Shawcroft
c5fa9730a8
Compiles! 2020-06-24 12:47:59 -07:00
Scott Shawcroft
a26102607e
Add UART support 2020-06-24 12:47:58 -07:00
Jeff Epler
87835c77e8
Merge pull request #3038 from jepler/compute-usb-devices 
Compute USB_DEVICES instead of requiring it to be specified
 2020-06-24 13:31:56 -05:00
Jeff Epler
f232aef786 supervisor.mk: Compute USB_DEVICES; remove from boards and ports 
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
 2020-06-23 12:59:01 -05:00
Jeff Epler
38659b566c atmel-samd: Finish disabling USB MIDI and/or HID on certain boards 2020-06-23 10:56:27 -05:00
Jeff Epler
d5074220a8 atmel-samd: Add SAM E54 Xplained board 
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
 2020-06-23 10:41:48 -05:00
Jeff Epler
da733c01da atmel-samd: Add support for SAM E54 family MCUs 
This introduces the new macro SAM_D5X_E5X.  This is mostly the same
as SAMD51 before, except in a few places where a special case for
SAME54 is required
 2020-06-23 10:41:48 -05:00
Scott Shawcroft
0b99baccb8
Merge pull request #3050 from florin-trutiu/loc-ber-m4-base-board 
PID request for a new board configuration
 2020-06-22 15:09:42 -07:00
Scott Shawcroft
54b66d9484
Merge pull request #3052 from dhalbert/samd51-voltage-check-delay 
delay 1ms on SAMD51 when reading processor voltage
 2020-06-22 14:29:43 -07:00
Jeff Epler
d43449a6d6 sparkfun samd51 thing plus: Fix board.I2C() 
This had the SDA and SCL pins transposed, so nothing worked.
 2020-06-22 10:45:27 -05:00
Jeff Epler
a770b5a919 never_reset_pin: Move pin validity check before first use of pin number 2020-06-22 10:45:27 -05:00
Jeff Epler
6638bc32c3 samd: Makefile: Regularize whitespace 2020-06-22 10:45:27 -05:00
Jeff Epler
a580f0f1c4 _pew: move to common-hal 
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10).  Move it.

There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
 2020-06-22 10:45:27 -05:00
Dan Halbert
1687c8b1e3 delay 1ms on SAMD51 when reading processor voltage 2020-06-19 15:25:04 -04:00
Florin Trutiu
b316549590 Added the new assigned VID/PID pair 2020-06-19 19:26:29 +03:00
Florin Trutiu
178be2e3c9 loc_ber_m4_base_board 2020-06-19 18:56:20 +03:00
Jeff Epler
3c3cad5ae6 docs: Improve 5.0.x <-> main branch doc linkrot 
This improves, but does not entirely fix, the broken links that result
from the autoapi change.  It fixes module-level links, but class links
still do not work (e.g., /shared-bindings/displayio/Palette.html (5.0.x)
is now just /shared-bindings/displayio/#displayio.Palette).
 2020-06-14 11:12:35 -05:00
Diego Elio Pettenò
dd5d7c86d2 Fix up end of file and trailing whitespace. 
This can be enforced by pre-commit, but correct it separately to make it easier to review.
 2020-06-03 10:56:35 +01:00
Scott Shawcroft
796373b8be
A number of small ESP32S2 fixes: 
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
 2020-05-28 15:43:55 -07:00