9811c1fe4b
Merge pull request #2896 from theacodes/add-bytearray-decode
...
Add bytearray.decode() for CPython compatibility
2020-05-18 14:38:45 -07:00
058a73128c
mimxrt10xx: Fix cpu.temperature crash
...
Fixes #2514
2020-05-18 22:30:50 +02:00
f92d53eaab
mimxrt1010: Increase max SPI speed
2020-05-18 22:07:38 +02:00
9f7c26c60d
nrf: port: call common_hal_rtc_init() during init
...
Call the new function to set the RTC, or reset it if the offset is not
valid.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:30 +08:00
83680c41db
nrf: rtc: persist rtc offset across reboots
...
Store the RTC value in the .uninitialized section, but make sure to
flank it with some known values. That way we can determine if the RTC
value has been initialized, or if it's random uninitialized garbage.
As part of this, add a `common_hal_rtc_init()` routine to determine if
the value is correct, or reset it to 0 if it is not valid.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:27 +08:00
3b5f5ddaa6
nrf: port: move saved word into .uninitialized section
...
Circuit Python supports saving a single word of data across reboots.
Previously, this data was placed immediately following the .bss.
However, this appeared to not work, as Circuit Python zeroes out the
heap when it starts up, and the heap begins immediately after the .bss.
Switch to using the new .uninitialized section in order to store this
word across resets.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:25 +08:00
192bb155fa
nrf: port: move the heap after .uninitialized
...
Previously, it was placed following .bss. However, now that there is a
new section after .bss, the heap must be moved forward.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:20 +08:00
f002c784c0
nrf: linker: add a new .uninitialized section
...
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.
The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
4f7b4241a2
add hiibot_bluefi
2020-05-18 09:42:37 +08:00
e175a64036
disable rotaryio in CPX crickit
2020-05-15 20:35:12 -04:00
a57da6b808
Add port_fixed_stack for more spresence
2020-05-15 17:22:41 -07:00
8edb8e87c8
Turn reverse methods off for trinket haxpress
2020-05-15 17:22:22 -07:00
86f865afe0
Turn reverse methods off for cpx_crickit
2020-05-15 16:42:22 -07:00
3c1469b0a5
Add port_fixed_stack for more builds
2020-05-15 16:22:33 -07:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
a3ca9401b4
Shrink crickit build
2020-05-15 18:29:37 -04:00
99538c2414
Implement pin claiming, pin reset, and pin protections
2020-05-15 15:16:51 -04:00
0d8bca92e2
Merge pull request #2810 from dherrada/master
...
Pyi integration
2020-05-15 10:31:05 -07:00
db4dbe0752
Merge pull request #2889 from jepler/gamepad-tick
...
Gamepad, GamepadShift: Fix after lower-power by enabling supervisor tick
2020-05-13 11:53:23 -07:00
eb876e21c3
nrf: code style
2020-05-13 10:40:41 -05:00
011acf41c0
nrf: Ensure ticks enabled while playing audio
2020-05-13 10:40:36 -05:00
adef45403b
samd: audio dma: enable/disable supervisor tick as needed
2020-05-13 10:29:36 -05:00
7546d47f77
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-13 08:23:55 -07:00
80129c5a21
Disable countio on trinket haxpress
2020-05-12 18:55:49 -07:00
cde6651721
Merge remote-tracking branch 'adafruit/master' into improve_verification
2020-05-12 18:23:59 -07:00
277e8d528b
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 18:22:57 -07:00
4e8de3c554
Swap sphinx to autoapi and the inline stubs
2020-05-12 17:28:24 -07:00
5a80f5e606
nerf vectorio on a ton of m0 and overcommitted m4 boards due to translation text size
2020-05-12 15:23:00 -07:00
d274074f01
Merge remote-tracking branch 'adafruit/master' into vectorio
2020-05-12 12:29:05 -07:00
bc40034a08
Merge branch 'master' into Optical-Encoder-Module
2020-05-12 12:12:51 -07:00
f7303e6bd0
Merge pull request #2754 from maholli/non-standard-nvm
...
Add non-standard nvm to QSPI for external flash support
2020-05-12 11:56:33 -07:00
62bdfb74e3
removed lib from catwan_usbstick - updated transalations overflowed
2020-05-12 16:40:23 +10:00
5e5461e77e
removed countio from catwan_usbstick build
2020-05-12 16:32:35 +10:00
ee2cb703c8
merged master
2020-05-12 14:41:28 +10:00
ffaeeda749
nrf: simmel: decrease flash filesystem size
...
The flash filesystem must be reduced in order to allow the current
build to fit.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
f7fcd43516
nrf: simmel: disable SPIM3
...
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
370fc7293a
nrf: support disabling SPIM3
...
SPIM3 is faster than all other SPI blocks, and is capable of generating
a 32 MHz clock. However, it cannot be used at the same time as the BLE
radio without dedicating an additional 8 kB of RAM to it.
Therefore, some boards may want to disable this. Support pre-defining
NRFX_SPIM3_ENABLED on the command line to disable it on some bords.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
79c055f958
nrf: simmel: enable aesio
...
This adds AES support to simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
235098efb8
nrf: simmel: correct CSn pin
...
The CSn pin is pin 6 on bank 1, not bank 0.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go
...
add nRF52840 based Makerdiary Pitaya Go
2020-05-11 16:34:27 -07:00
4937d5f1ca
Merge pull request #2866 from hierophect/stm32-lsetimeout
...
STM32: Fix LSE hang at startup
2020-05-11 16:23:09 -07:00
55f78bfb70
Merge pull request #2878 from WarriorOfWire/ujson-stream-protocol
...
ujson: work with mp stream protocol for fast & easy read
2020-05-11 15:40:27 -07:00
801d9655e5
Merge pull request #2881 from DavePutz/Issue2872
...
Added call to rtc_reset() to fix Issue #2872
2020-05-11 15:30:32 -07:00
94949fb46f
Add recovery domain write access, adjust stack
2020-05-11 18:02:40 -04:00
61450cbd56
Add Teensy 4.1 board definition
2020-05-11 13:58:58 -07:00
248704b262
Merge remote-tracking branch 'upstream/master' into stm32-lsetimeout
2020-05-11 14:18:37 -04:00
407938bf3a
Added a check for platforms supporting RTC before calling rtc_reset()
...
Added an #if CIRCUITPY_RTC check for platforms supporting RTC
2020-05-11 12:03:44 -05:00
2ddfab315c
Added call to rtc_reset() in rtc_init()
...
Fix for issue #2872 . The rtc_time_source had not been initialized; causing a time.time() call to fail.
2020-05-11 11:31:18 -05:00
eb3d5fa453
ujson: do not eat trailing whitespace
...
Ujson should only worry about whitespace before JSON. This becomes apparent when you are using MP stream protocol to read directly from input buffers.
When you attempt to read(1) on a UART (and possibly other protocols) you have to wait for either the byte or the timeout.
Fixes:
- Waiting for a timeout after you have completed reading a correct and complete JSON off the input.
- Raising an OSError after reading a correct and complete JSON off the input.
- Eating more data than semantically owned off the input buffer.
- Blocking to start parsing JSON until the entire JSON body has been loaded into a potentially large, contiguous Python object.
Code you would write before:
```
line = board_busio_uart_port.read_line()
json_dict = json.loads(line)
```
or reaching for fixed buffers and swapping them around in Python.
Code that did not work before that does now:
```
json_dict = json.load(board_busio_uart_port)
```
- This removes the need for intermediate copies of data when reading JSON from micropython stream protocol inputs.
- It also increases total application speed by parsing JSON concurrently with receiving on boards that read from UART via DMA.
- It simplifies code that users write while improving their apps.
2020-05-10 20:45:42 -07:00
206d0e598a
Add vectorio: for drawing shapes
...
vectorio builds on m4 express feather
Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.
VectorShape provides transpose and x/y positioning for shape implementations.
Included Shapes:
* Circle
- A radius; Circle is positioned at its axis in the VectorShape.
- You can freely modify the radius to grow and shrink the circle in-place.
* Polygon
- An ordered list of points.
- Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last
point and the first point.
- You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a
top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
x and y properties will position the rectangle relative to its top center point
* Rectangle
A width and a height.
2020-05-09 15:38:22 -07:00
e6df8e0989
Merge branch 'master' into non-standard-nvm
2020-05-09 12:22:50 -07:00
8d00d99ca0
Shrink hallowing_m0_express to fit ko build
2020-05-08 22:51:21 -04:00
5249a7b02c
Add timeout and adjustment to LSI
2020-05-08 12:36:39 -04:00
182ae10080
Fix build after #2831 (stm32f4xx rgbmatrix) broke it
2020-05-07 18:32:50 -05:00
c3b3eb4c21
Merge pull request #2831 from jepler/rgbmatrix-stm
...
stm: enable RGBMatrix
2020-05-06 08:35:25 -07:00
4519ddebeb
Merge pull request #2841 from hierophect/mimxrt-spi-oneway
...
mimxrt10xx: add one-directional SPI
2020-05-06 08:32:21 -07:00
7f1be814c8
changed build variables as per advice
2020-05-06 09:04:15 +10:00
a1330747e8
text fixes, postpone warning disable
2020-05-05 12:46:30 -04:00
c311b5c002
Merge pull request #2842 from hierophect/stm32-h7-displayio
...
STM32: Add displayio to F7/H7
2020-05-05 12:37:08 -04:00
f63ee9fb9b
excluded countio from other smaller boards
2020-05-05 16:15:57 +10:00
d5c24b99b8
hallowing m0 - exclude countio
2020-05-05 16:04:28 +10:00
bfa5cd9c13
refactor countio based on feedback
2020-05-05 15:23:38 +10:00
b7836aeac6
address review comments
2020-05-04 19:51:08 -04:00
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
602eabe668
Squeeze hallowing_m0_express build slightly
...
ko build is a little too big.
2020-05-04 17:18:53 -04:00
c377d4bea7
Merge branch 'master' into non-standard-nvm
2020-05-04 16:08:45 -04:00
d6c6f9f4f0
add PacketBuffer .incoming_ and .outgoing_packet_length
2020-05-04 15:59:45 -04:00
4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100
...
nrf: add pca10100
2020-05-04 10:51:01 -04:00
b128399d1e
nrf: simmel: enable CIRCUITPY_USB_HID
...
Simmel had USB HID disabled in order to save space. However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID. This in turn caused HID to be included
in the USB Configuration Descriptor.
For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython. However, in the most recent version this has rightfully
caused asserts to appear during configuration.
Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
cb4fc894d7
nrf: add pca10100
...
This is the nRF52833-DK board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:07:49 +08:00
61b0994631
Fix flag typo
2020-05-01 14:46:06 -04:00
bc581fbdfb
Add-unidirectional-SPI
2020-05-01 13:15:38 -04:00
7dd3ddc06b
use Nordic's VID which seems to be allowed
...
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
2020-05-01 06:10:43 +00:00
a863b0a349
Fix openmv_h7 build
2020-04-30 13:46:12 -07:00
1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-30 13:25:31 -07:00
10c5bf666e
Merge pull request #2836 from hierophect/stm32-openmv-pid
...
STM32: Add correct PID for the OpenMV
2020-04-30 16:07:34 -04:00
06b62721b3
Increase H7 filesystem size
2020-04-30 15:49:17 -04:00
74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout
...
Update teknikio bluebird pin assignments
2020-04-30 11:50:02 -07:00
435aa3d055
Add correct PID for the OpenMV
2020-04-30 14:49:47 -04:00
4f71bd295d
Make PulseIO optional within DisplayIO
2020-04-30 14:47:50 -04:00
f44e1d6a8d
Merge pull request #2828 from simmel-project/add-simmel
...
WIP: add simmel board
2020-04-30 11:40:34 -07:00
89ff5589c4
Add the OpenMV-H7 R1 board
2020-04-30 12:39:20 -04:00
e5be728c1c
stm: enable protomatter
...
Testing performed: on stm32f405 feather, all pins change in plausible ways
on a logic probe. Didn't actually drive a display yet.
2020-04-30 08:58:58 -05:00
36a71560c2
update teknikio bluebird pin assignments
2020-04-30 09:58:27 -04:00
4393a88fb6
add nRF52840 based Makerdiary Pitaya Go
2020-04-30 07:38:20 +00:00
241d7e2ae6
change many ifndefs to ?=
2020-04-29 23:31:34 -04:00
f3078511a6
further cleanup and bug fixing
2020-04-29 23:18:08 -04:00
6aac9233db
nrf: bluetooth: add s147 v7.0.1 softdevice hexfile
...
This was not added as part of the initial v7.0.1 patchset because
.hex files are in this project's .gitignore, and so git ignored it.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-30 10:43:46 +08:00
180f5c6a94
Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes
2020-04-29 22:11:22 -04:00
3d62f87e29
back to '.packet_size' for compatiblity
2020-04-29 22:10:56 -04:00
84cee1ab8d
rename and improve PacketBuffer packet length property
2020-04-29 17:49:31 -04:00
3799c34564
Disable bitbangio on CPX Crickit so we have room for lower_power.
...
Enable pixelbuf in its place because we'll need it soon.
2020-04-29 13:57:09 -07:00
a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-29 10:51:21 -07:00
1d0781bf12
nrf: add simmel board
...
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
2d7cf4b792
Merge pull request #2819 from hierophect/stm32-readme
...
STM32: Add port readme, make flash
2020-04-28 12:32:03 -07:00
b2de5a9df9
fixing my goofy gcc-arm local stuff
2020-04-28 12:24:10 -07:00
6c4decd4e2
decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE
2020-04-28 11:51:07 -07:00
baad9c11df
Merge branch 'master' into non-standard-nvm_cleanup
2020-04-28 11:42:58 -07:00
b9e494b85a
add submodule to TG-Watch02A
2020-04-28 00:03:02 -04:00
b7804f450b
Fix stm32746g_discovery
...
Also, rename it so that matches the other board names.
2020-04-27 20:34:42 -07:00
e45de39998
Fix nucleo_f746zg build
2020-04-27 20:28:05 -07:00
76b466a38a
add submodule to TG-Watch02A
2020-04-27 22:49:30 -04:00
2a0e176a77
Add readme and dfu-flashing
2020-04-27 20:51:47 -04:00
de42e4af02
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 17:43:32 -07:00
40a1f3edbc
Merge pull request #2811 from jepler/update-ulab
...
ulab: actually update the submodule
2020-04-27 17:41:43 -07:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
faa50df05f
Merge pull request #2817 from jepler/stm-linker-scripts
...
Standardize on FLASH_FIRMWARE section name in linker scripts
2020-04-27 18:43:26 -04:00
7f0f0b30d3
linker scripts: Re-align at ":"
...
With "git show -b" you can verify that this is a whitespace only change
because the diff will be empty.
2020-04-27 17:17:42 -05:00
86943ca8a1
Merge remote-tracking branch 'adafruit/master'
2020-04-27 13:51:51 -07:00
7eff89e9f9
linker scripts: Re-align at ":"
...
With "git show -b" you can verify that this is a whitespace only change
because the diff will be empty.
2020-04-27 12:47:52 -05:00
d9e4155815
Merge branch 'master' into stm32f7_os
2020-04-27 12:58:15 -04:00
31d8e46063
Enables os on STM32F7
...
os.uname() works
os.urandom() doesn't work yet, will enable in another PR
2020-04-27 18:18:43 +02:00
f9096d83ac
Enables PulseIO on STM32F7
...
Tested on nucleo_f746zg
2020-04-27 17:55:07 +02:00
6f6dc835d2
litex: Use FLASH_FIRMWARE instead of FLASH in linker scripts
...
for compatibility with the build_memory_info script
2020-04-27 09:12:45 -05:00
808b456927
mimxrt10xx: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts
...
for compatibility with the build_memory_info script
This change was scripted:
git grep -l FLASH_TEXT | xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/
2020-04-27 08:07:47 -05:00
aff42defda
stm: Use FLASH_FIRMWARE instead of FLASH_TEXT in linker scripts
...
for compatibility with the build_memory_info script
This change was scripted:
git grep -l FLASH_TEXT | xargs sed -i s/FLASH_TEXT/FLASH_FIRMWARE/
2020-04-27 08:07:28 -05:00
485f667141
ulab: disable on espruino pico
...
this non-"express" board is nearly full. Right now it's actually possible
just to disable the "compare" module, but as this leaves it packed
pretty full I prefer to fully disable it in order to avoid the topic
returning again soon.
2020-04-27 07:47:05 -05:00
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb
...
Update tinyusb
2020-04-26 20:55:36 -07:00
652a5de242
Merge pull request #2809 from k0d/stm32f767xx_fix
...
Adds missing declarations in periph.h for stm32f767xx
2020-04-25 14:16:34 -04:00
8814dd038e
Adds missing declarations in periph.h for stm32f767xx
2020-04-25 19:50:48 +02:00
67c053e9c4
Add USB include for LiteX
2020-04-24 17:24:05 -07:00
5c7f6e6211
Remove empty #if and add missing includes.
2020-04-24 11:48:55 -07:00
91fbbcab19
adds support for the stm32f746g_disco board
2020-04-24 16:43:39 +02:00
5a22a5d016
Merge pull request #2598 from hierophect/stm32-docfix
...
Add stm to docs matrix
2020-04-24 10:07:15 -04:00
982a755eae
Merge pull request #2801 from simmel-project/nrf-s140-7.0.1
...
Add NRF S140 7.0.1
2020-04-23 21:59:51 -04:00
bd0df9e3bc
Minor redundancy fix
2020-04-23 17:43:35 -04:00
c6c77726e7
Merge remote-tracking branch 'upstream/master' into stm32-docfix
2020-04-23 13:39:48 -04:00
8791ca6af3
implement requested changes
2020-04-23 13:33:41 -04:00
ead7c6c887
Merge pull request #2785 from k0d/ports_nucleo_f746zg
...
STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board
2020-04-23 12:32:44 -04:00
83cc9783cc
STM32: adds support for stm32f746xx MCU and the nucleo_f746zg board
2020-04-23 10:48:27 +02:00
f13de32208
Add HSE_VALUE for STM feather.
2020-04-22 14:37:24 -07:00
d0a2106547
Remove old build flags, add fixes for shared_matrix
2020-04-22 16:06:08 -04:00
b277944cf0
Fix STM so it matches the correct RTC fields.
2020-04-22 11:10:51 -07:00
689dd61379
nrf: nrf52833: use s140 v7.0.1
...
Previously, we were using v6.1.1 which worked, but was unsupported.
v7.0.1 is the first version of s140 that supports the nRF52833.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-22 13:34:11 +08:00
09bef7b0e1
nrf: bluetooth: add s140 v7.0.1
...
This is the first version with official support for nRF52833.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-22 13:33:39 +08:00
2f86e31501
fix calculation of nrf firmware size
2020-04-22 00:52:54 -04:00
fbc8719fad
ringbuf tested
2020-04-21 22:40:12 -04:00
77cd93ac2d
merge from adafruit
2020-04-21 17:47:51 -04:00
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
dcb0e50f04
Fix USB midi and hid disable.
2020-04-21 14:15:44 -07:00
5cc8a3ec82
Add back fake us delay.
2020-04-21 14:14:49 -07:00
17d038830d
Use our own flag for board crystal config.
2020-04-21 14:14:30 -07:00
c04e6d6f52
nrf: bleio: parameterize softradio configuration
...
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations. If a
parameter is unspecified then the previously-defined value is used.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:59 +08:00
3537ad4059
nrf: mpconfigport: support configuration of various sizes
...
Conditionally set variables such as the softdevice RAM size, bootloader
size, and the spi m3 buffer size. This allows ports to adjust these
values to suit their needs.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:58 +08:00
33720af0c6
nrf: mpconfigport: subtract config size from firmware size
...
The BLE Config area needs to be subtracted from the size of the firmware.
THis is because the firmware is counted by walking backwards from the end
of memory, and the BLE config area is placed lower in memory than the
firmware. Subtracting the BLE config size ensures the internal flash
filesystem doesn't try to use the firmware as storage.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:57 +08:00
3ed5b87b8f
nrf: add support for nrf52833
...
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
4ad1cbeea3
nrf: make rgbmatrix and framebufferio optional
...
Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0
in their .mk file in order to prevent these from being built. This
is necessary for resource-constrained devices.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 10:44:21 +08:00
066f486b28
nrf: supervisor: support building without BUSIO
...
Only initialize i2c, spi, and uart if building with BUSIO.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 10:44:20 +08:00
ac9d336f40
nrf: make neopixel support optional
...
Add a conditional around the call to neopixel_write(), allowing us
to build for nrf without neopixel support.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 09:56:27 +08:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
a4d86b96fd
Merge pull request #2777 from pewpew-game/master
...
Fix RGB/BGR colors in Stage
2020-04-20 15:25:29 -07:00
506f340c7d
STM32: f767: Fixes linker settings.
2020-04-20 19:15:18 +02:00
5fcc6d6286
RGBMatrix: finish renaming from Protomatter
...
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
3d6258f63d
Rename Protomatter -> RGBMatrix
...
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
a32337718d
Rename _protomatter -> protomatter
...
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
7e3d4c61b5
Update TinyUSB and add interrupt hooks.
2020-04-17 14:16:49 -07:00
1a71c8c515
Merge pull request #2735 from hierophect/stm32x7-setup
...
STM32: Add F7 and H7 Support
2020-04-17 13:02:09 -04:00
43022d8294
Add copyrights to pewpew m4 and ugame board.c
2020-04-17 09:50:11 +02:00
9e49fc13f4
startup file crash fix, H7 bin fix
2020-04-16 17:33:48 -04:00
5b0d9bdeb0
Update copyright to bump the CI
2020-04-16 14:21:26 -07:00
b3552efc76
Remove accidental file
2020-04-16 11:28:01 -07:00
61f777c9c6
litex: enable binascii and ujson modules
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-16 10:02:08 +08:00
bb527ac9ea
litex: disable minimal build
...
Manually specify available modules and disable any modules
that are currently unsupported on the litex target.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-16 09:26:08 +08:00
db3933429a
litex: add os module
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-16 09:26:08 +08:00
6885ffc9af
litex: mphalport: add fake mp_hal_delay_us
...
Add a mp_hal_delay_us, which is required by some of the modules,
that simply calls mp_hal_delay_ms / 1000.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-16 09:26:08 +08:00
f39ca6052e
Fix RGB/BGR colors in Stage
...
This makes the colors used by the stage library compatible with those
used by the displayio library.
2020-04-15 23:41:38 +02:00
00b2e6a1db
Fix korea translation error, minor submodule change
2020-04-15 13:11:14 -04:00
54abfc2e8b
translations-merge
2020-04-15 10:29:05 -04:00
6427994b14
Implement requested changes
2020-04-15 10:22:51 -04:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
7dfcae6067
Tweaks from jepler
2020-04-14 17:09:48 -07:00
23bced26da
samd: actually disable protomatter timer
...
Just setting the timer handler to NO_INTERRUPT doesn't stop the
interrupt from occurring.
2020-04-14 18:24:58 -05:00
759fdffda5
Update ports/atmel-samd/boards/pyportal_titano/board.c
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-04-14 18:24:58 -05:00
1d8a073c05
nrf: protomatter port
2020-04-14 18:24:58 -05:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
a51d4f7a45
pycubed: add trailing newline to file
...
POSIX specifies that text files end in a trailing newline
2020-04-14 18:24:54 -05:00
db01f88cc3
enable MICROPY_PY_REVERSE_SPECIAL_METHODS where ulab is enabled
2020-04-13 19:58:52 -05:00
83a55f65a4
Implement cache-based reads
2020-04-13 15:14:38 -04:00
426d2afe28
Fix pin mapping for the H7 Nucleo
2020-04-13 14:36:49 -04:00
6227e63cc5
Merge remote-tracking branch 'upstream/master' into stm32x7-setup
2020-04-13 12:03:56 -04:00
5ac38c95cc
Various requested fixes
2020-04-13 12:03:05 -04:00
cac4fb0318
Merge branch 'master' into nfc_copy
2020-04-09 17:05:11 -05:00
49771b4d7f
Update to v1.3
2020-04-09 14:27:51 -05:00
92a0621e59
Add busio support, cleanup
2020-04-09 13:43:19 -04:00
01941c027b
Fix up STM
...
Enable the Alarm IRQ earlier and correct bit clearing.
2020-04-08 14:41:57 -07:00
d0a25ca9ac
Tweaks based on dhalberts feedback
2020-04-08 10:49:46 -07:00
181ecf4a9b
fixing my goofy CROSS_COMPILE fix
2020-04-07 21:54:46 -07:00
a53a26be70
missed a debug flag
2020-04-07 18:24:53 -07:00
826837186c
adds standard (non-queued) SPI support to QSPI for external flash
2020-04-07 18:17:25 -07:00
6544bf52fb
Enable SNVS interrupt
...
The iMX RT has a separate wake up controller, the GPC, that replaces
the NVIC when asleep. It adds the ability to only wake up on certain
interrupts. It seems that it requires at least one enabled interrupt
in the NVIC to turn on it's wake up circuitry. It doesn't need to
be the same interrupt as the wake up signal. For example, the RTC
in the SNVS can wake us up if a USB interrupt is enabled. Before
then it won't work. So, we enable the SNVS interrupt on start up
so it can wake us up.
2020-04-07 17:15:18 -07:00
aae0ce6bad
Fix autoreload and ticks on IMX RT
2020-04-07 14:16:07 -07:00
a8dfba235c
Fix alarm so that it is correctly set.
2020-04-07 13:07:29 -07:00
c0ba2a839f
Updates based on feedback from jepler
2020-04-06 16:03:31 -07:00
08f369ea96
mimxrt1011: Only re-init SPI when it's actually needed
...
If some crazy code (*cough* FourWire) decides to reconfigure the bus
before every transfer, it might get a bit slow...
2020-04-06 22:10:12 +02:00
e99cf6e441
Rework sleep timing
...
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
2020-04-03 18:07:56 -07:00
7e69d30c02
Fix nRF PulseIn
2020-04-03 14:22:56 -07:00
9761672d42
Linker file restructure, TCM and MPU additions
2020-04-03 16:33:18 -04:00
46af4bdd0e
Fix SAMD21 PulseIn
2020-04-02 17:35:52 -07:00
47a5d83267
Implement F7 Nucleo
2020-04-02 11:47:16 -04:00
9845a064ad
ports: fomu: move more functions into ram for stability
...
The SPI flash on current Fomu firmware is slow. Circuitpython runs
XIP from SPI flash, and so execution time can also be slow. Ordinarily
this isn't a problem, however certain operations are time-sensitive.
In particular, USB function needs to be handled quickly in order to
prevent the host from re-enumerating the device.
Place several critical TinyUSB structures into RAM, as well as several
hot functions that are frequently called. This reduces execution time
at the expense of system memory, and greatly improves system stability.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-02 11:21:22 +08:00
2f764ded63
merge and docs
2020-04-01 13:52:53 -04:00
a89928c13c
Implement requested changes
2020-04-01 13:02:05 -04:00
77562a2acd
Update the supported ports
2020-03-31 18:27:55 -07:00
75b7f583d2
Update LiteX APIs for new tick
2020-03-31 17:52:23 -07:00
1071924701
Fix thunderpack build
2020-03-31 17:05:37 -07:00
317b96e93a
Fix iMX builds
2020-03-31 17:00:30 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
4b063aeb29
Hack up STM32 PulseIn so it builds
2020-03-31 15:12:11 -07:00
f47b964c5f
Merge pull request #2726 from xobs/fomu-circuitpython
...
ports: litex: add port and fomu board
2020-03-31 13:51:09 -07:00
cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server
...
Fix PacketBuffer server support
2020-03-31 13:39:34 -07:00
c69f7f8657
ports: litex: use dfu.py instead of dfu-suffix.py
...
dfu.py now generates proper dfu suffixes without the nonstandard prefix.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 13:04:59 +08:00
34ea140783
ports: fomu: build dfu as part of Makefile
...
Now that we have a replacement for `dfu-suffix`, construct a dfu
image rather than a UF2 image.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 11:42:55 +08:00
065441e58c
ports: litex: enable itcm region for fomu
...
This adds a new command line flag -DFOMU to indicate we're building
for a Fomu board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 09:40:38 +08:00
786e79ebc9
ports: litex: add port and fomu board
...
This adds support for Litex, along with support for the Fomu FPGA board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-03-31 09:40:38 +08:00
e8cffcf978
Merge pull request #2740 from arturo182/mimxrt10xx_neopixel
...
mimxrt10xx: Fix neopixel_write
2020-03-30 17:49:14 -07:00
13022be299
mimxrt10xx: Fix neopixel_write
2020-03-31 01:05:03 +02:00
7cfa8e1a68
board_vina_m0:pins.c: PGM_LED is on PA28 not PA15.
2020-03-29 18:59:00 -04:00
e2be069686
Support cached internal flash on the H743
2020-03-28 18:30:46 -04:00
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
a4a458943d
Correct MIMXRT sdk version
2020-03-27 15:40:17 -07:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
e4c4a4a3de
Swap to committed dependencies
2020-03-27 14:39:59 -07:00
b043384949
Update built in display init
2020-03-27 14:35:29 -07:00
7995bcac40
Flash additions
2020-03-27 14:15:33 -04:00
7fa38e8725
Update board name to bdmicro_vina_m0 to eliminate hyphens.
2020-03-27 13:37:59 -04:00
14a1e5756e
Merge branch 'master' of https://github.com/adafruit/circuitpython
2020-03-26 20:28:54 -04:00
2ae9edcbff
Add new board BDMICRO 'Vina M0'.
...
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.h
ports/atmel-samd/boards/bdmicro_vina_m0/mpconfigboard.mk
ports/atmel-samd/boards/bdmicro_vina_m0/board.c
This board includes the newly added MX25L51245G 64MB SPI flash chip
for the CircuitPython file system. Also included is the PCF2129T/2,518
high accuracy, battery backed, RTC. Also includes an independent USB
HOST connector in addition to USB DEVICE making it easy to connect USB
peripherals. Designed mainly as a general purpose module to piggy back
onto application-specific boards, it can also run low power standalone
in harsh environments for data logging and other control applications
using an appropriate enclosure.
Has been extensively tested with CircuitPython and works well.
2020-03-26 20:15:54 -04:00
348df4be2b
Merge remote-tracking branch 'upstream/master' into stm32x7-setup
2020-03-26 18:16:11 -04:00
c4db8b87e2
Add F7 and H7 Support to the STM32 port
...
Restructures the STM port of Circuitpython to be more generic about the STM32 chip lines to support
the F7 and H7 series of chips. Adds the new Packages directory to organize different chip layouts
between lines. Makes general changes to the Makefile to condense board-level flags to the minimum
and support the new chip series. Adds the new chip line to the Peripherals directory, along with
new python tools used to generate peripheral text automatically in the tools/ directory.
2020-03-26 18:01:17 -04:00
aec3b2419b
Merge pull request #2733 from oshwabadge2020/change_backlight
...
Add backlight polarity flag to Display
2020-03-26 14:00:47 -07:00
3959548054
Merge pull request #2734 from theacodes/add-flash-for-sol
...
Add GD25Q64C as a flash chip for Sol
2020-03-26 13:27:56 -07:00
ff67571e9a
Add GD25Q64C as a flash chip for Sol
2020-03-26 12:33:27 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
7bba79363a
allowing backlight change
2020-03-25 22:41:23 -07:00
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling
2020-03-25 17:41:47 -07:00
18c12e7822
mimxrt10xx: Return proper UART read length when everything was read
2020-03-26 00:15:48 +01:00
3551b769a2
Fix connection handle tracking in PacketBuffer when a server.
2020-03-25 13:31:18 -07:00
59eb35da30
Merge pull request #2727 from burtyb/commander-1
...
Add support for Commander
2020-03-25 11:00:11 -07:00
ea0ce39962
Simplify STM a bit.
2020-03-24 15:49:24 -07:00
5e1e4d32db
Get basic sleep going on the iMX RT 1011
2020-03-24 15:46:10 -07:00
5e559be9b5
Remove Adafruit_CircuitPython_CircuitPlayground
2020-03-24 21:10:34 +00:00
f414f2b588
Merge pull request #2723 from jgillick/jgillick/circuitpython/stm32f411
...
Add new STM board: Thunderpack
2020-03-24 12:27:20 -07:00
c961ed9025
Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files
2020-03-24 13:25:02 -04:00
8ed4deee9d
Rename pins
2020-03-23 23:06:55 -07:00
a8ed6d993c
Switch iMX RT to RTC. Untested.
2020-03-23 18:20:58 -07:00
653b7619ec
Add back microsecond delay to STM32
2020-03-23 16:09:50 -07:00
c0c4c4403a
Factor out stm32f4xx_hal_conf.h
2020-03-23 14:46:25 -07:00
29ce756709
PR feedback.
2020-03-22 18:41:19 -07:00
a79ac35173
Rename NVM_BYTEARRAY_BUFFER_SIZE
2020-03-22 15:20:58 -07:00
68195a8dfe
Update NVM_BYTEARRAY_BUFFER_LEN
2020-03-22 15:19:53 -07:00
39a19d54c2
Add support for Commander
2020-03-22 16:23:56 +00:00
d76b76cb1d
Add non-volatile memory support to STM
2020-03-22 02:22:59 -07:00
c62b724b24
Merge remote-tracking branch 'circuitpython/master' into jgillick/circuitpython/stm32f412c
2020-03-21 23:36:15 -07:00
2623022c84
Initial work for STM32. Need to fix us delay and PulseIn still.
2020-03-20 12:58:34 -07:00
d9e491a9e8
Remove unnecessary change
2020-03-19 00:02:23 -07:00
284073584a
Cleanup
2020-03-19 00:01:32 -07:00
9be2ab6008
Change the board to use an STM32F411 chip.
2020-03-18 23:55:18 -07:00
5dc3a8960b
Merge pull request #2719 from theacodes/add-honking-button
...
Add board support for Winterbloom Big Honking Button
2020-03-18 17:37:59 -07:00
e027aaf433
Remove some build options, fix order of boards in build.yml
2020-03-18 16:49:10 -07:00
7332adfa21
Add board support for Winterbloom Big Honking Button
2020-03-18 16:29:44 -07:00
679314a22e
Fix disable VBUS sensing.
2020-03-18 00:35:20 -07:00
4603c6ddd7
Merge pull request #2711 from jepler/update-ulab
...
update ulab
2020-03-17 15:33:08 -07:00
6db11cf68b
Fix up Spresense build. It doesn't sleep.
2020-03-17 14:21:45 -07:00
d9e68156b2
fix up SAMD21 sleep
2020-03-17 12:10:35 -07:00
d6342af980
ulab: rename enable macro so it appears in the support matrix
2020-03-17 09:33:03 -05:00
24d1fd2bf1
PR Cleanup.
2020-03-17 00:48:19 -07:00
d41ef45a9b
Update clock.
2020-03-17 00:36:18 -07:00
cbc0e0344d
Revert changes to system_stm32f4xx.c
2020-03-17 00:36:12 -07:00
07549b7fd9
Bring back trimmed spaces.
2020-03-17 00:27:04 -07:00
c8d9edd939
Merge pull request #2705 from NightSkySK/UARTlogger2
...
add UARTLogger2 board support for CircuitPython
2020-03-16 16:28:42 -07:00
bb3ed3a827
Merge branch 'master' into stm32x7-setup
2020-03-16 12:37:53 -04:00
8a93a81a26
Chip specific code.
2020-03-15 22:31:36 -07:00
5dbdf72472
Fix LED port.
2020-03-15 19:36:16 -07:00
f884c2b9b6
Incremental update
2020-03-15 19:34:41 -07:00
6f153804da
Add initial thunderpack port files.
2020-03-14 00:03:14 -07:00
76ca13b6ed
Fix SAMD51 pulsein
2020-03-13 17:21:15 -07:00
7100d5e485
Fix autoreload and ticks in general
2020-03-13 16:13:24 -07:00
df5be65423
Update FrequencyIn for new clock API.
2020-03-13 16:12:52 -07:00
c9aa50817c
add UARTLogger2 board support for CircuitPython
2020-03-13 21:39:17 +01:00
4fba4eb133
Switch from 1k RTC input to 32k output
2020-03-13 11:16:41 -07:00
48b5f2a384
Initial work on SAMD
2020-03-13 11:16:41 -07:00
affd3fcc2a
Clear the pending IRQ in the NVIC as well.
2020-03-13 11:16:38 -07:00
00d5f63e7c
Hopefully fix PulseIn
2020-03-13 11:12:31 -07:00
ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well.
2020-03-13 11:12:31 -07:00
418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD
2020-03-13 11:12:31 -07:00
6f60afe8c5
First try at lowering the power consumption
2020-03-13 11:12:30 -07:00
3a5f79acef
Merge pull request #2701 from hierophect/stm32-submodule-swap
...
STM32: Change ST drivers submodule to match TinyUSB
2020-03-13 10:47:54 -07:00
85f44e20cb
Merge pull request #2695 from TG-Techie/master
...
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
ef7370d023
Change ST drivers submodule to match TinyUSB
2020-03-12 17:14:09 -04:00
18442c5b00
Merge remote-tracking branch 'upstream/master' into stm32-port-namechange
2020-03-12 15:40:44 -04:00
0155fab356
Revise style on interrupt handler functions
2020-03-12 15:03:47 -04:00
bb167f04fa
WIP
2020-03-12 14:54:43 -04:00
ead32ea6e6
Comment change for CI
2020-03-12 11:21:32 -04:00
197dc344af
fix requested changes
2020-03-12 02:31:13 -04:00
127e531271
remove old directory
2020-03-11 18:16:52 -04:00
be7def128a
submodule move and sync
2020-03-11 18:16:16 -04:00
53b1544f41
create copy
2020-03-11 18:13:06 -04:00
38064750f9
Merge remote-tracking branch 'upstream/master' into stm32-pulsein
2020-03-11 16:39:11 -04:00
2b161d37df
stm32: add PulseIn module
2020-03-11 16:37:40 -04:00
b967a2071f
changed TG-Watch02A HW_BOARD_NAME
2020-03-10 23:07:25 -04:00
50b451ae0c
add TG-Watch02A board def
2020-03-10 22:40:55 -04:00
6363b5ad06
Merge pull request #2693 from jepler/ulab-enable
...
ulab: enable on most builds
2020-03-10 09:48:46 -04:00
03a2b2faf1
ulab: don't enable on m0 boards
2020-03-09 23:00:21 -05:00
66aa0dec60
stm32: enable ulab
...
This is needed because stm32 defines CIRCUITPY_MINIMAL_BUILD "for early
port".
2020-03-09 15:54:40 -05:00
e128d770f1
cdx56: prepare to enable ulab
...
This involves fixing support for SRC_MOD and enabling INTERNAL_LIBM
including adding support for SRC_LIBM.
2020-03-09 15:54:40 -05:00
fec84054d9
ah
2020-03-06 15:03:37 -05:00
7198056bc3
Merge pull request #2 from adafruit/5.0.x
...
5.0.x
2020-03-06 13:57:31 -05:00
03dfd28121
trying to pull 5.0.x
2020-03-06 13:52:47 -05:00
210c3274e5
Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup
2020-03-05 17:47:01 -05:00
409a4a9490
Disable the HID USB descriptor for Sol
...
It's not used and ends up being confusing for folks.
2020-03-04 23:22:46 -08:00
b4e1955526
Merge pull request #2583 from jepler/ulab
...
Add 'ulab' as an extmod; enable on nrf and most samd51 boards
2020-03-04 11:46:17 -08:00
4aec5d1e83
Merge pull request #2680 from hierophect/stm32-clock-hotfix
...
STM32: Fix restriction on GPIO clock enables for F407 Discovery board
2020-03-04 11:43:33 -08:00
da31acfcc4
Merge remote-tracking branch 'origin/master' into ulab
2020-03-03 20:13:53 -06:00
55e13715a9
Expand GPIO clock enables for F405 and F407
2020-03-03 17:21:47 -05:00
3178462218
Merge branch 'master' into stm32-pulseout
2020-03-03 15:03:19 -05:00
2fea811c30
Merge pull request #2672 from jepler/fuzz
...
Makefiles: add targets to build unix port, mpy-cross for fuzzing
2020-03-03 11:36:53 -08:00
17458ad81a
Merge pull request #2662 from jepler/issue2332
...
Fix unaligned disk reads properly
2020-03-03 11:27:50 -08:00
eb71bfe9d3
Exclude SoCs without basic timers
2020-03-02 11:22:40 -05:00
74bf17bb0d
Makefiles: add targets to build unix port, mpy-cross for fuzzing
...
This assumes you have properly install afl-fuzz with afl-clang-fast.
Tested with AFLplusplus 2.60c-75-g2c6847b.
2020-03-01 11:48:33 -06:00
dc64857a7d
Merge branch 'master' into ulab
2020-02-29 21:54:39 -06:00
8435935429
update uses of assert_pin_free; remove redundant checks
2020-02-29 15:37:32 -05:00
611ef27ac2
stm32: Add PulseOut support
...
Matches the implementations of the NRF and Atmel ports. TIM7 is used as it does not have a tied pin. Contains some register micromanagement since HAL support for the TIM7 timer is limited.
2020-02-29 14:47:47 -05:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
0af00cf914
Freeze adafruit_requests and adafruit_esp32spi into feather_m7_1011
2020-02-29 00:39:22 +01:00
3f26a0b06b
Freeze adafruit_requests and adafruit_esp32spi into feather_mimxrt1011
2020-02-29 00:26:39 +01:00
eef742bf45
oofatfs: Remove _FS_DISK_READ_ALIGNED
...
This workaround is no longer needed, so it can be removed.
Closes : #2332
2020-02-28 10:04:28 -06:00
1e6c08fc30
nrf: sqpi_flash: Handle unaligned reads
2020-02-28 10:03:37 -06:00
527eb2444c
added TG-Watch02A pins
2020-02-28 04:11:54 -05:00
6d4ffc69fd
add TG-Watch02A
2020-02-28 02:52:46 -05:00
fa3b9eba92
ulab: Incorporate it
2020-02-27 11:03:03 -06:00
4c710cf13b
unix port: add help(), help('modules')
2020-02-27 08:31:01 -06:00
09a3153bf4
Fix I2C clock divider
2020-02-27 14:08:39 +00:00
1b33cd11fc
Merge pull request #2658 from mubes/spi_fixes
...
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixups
2020-02-26 16:37:05 +01:00
aadb0bfc1e
Fix SPI clock speed on mimxrt10xx family & mimxrt1020 pinmux fixup
2020-02-26 14:28:54 +00:00
86e9fd170a
move red LED to D13 and make D3 lsm6ds IRQ
2020-02-25 18:00:23 -05:00
f20255813f
samd51 thing plus: new port
...
testing performed:
* successfully store and retrieve a 500kB file on the flash
* square wave output on each pin appears on o'scope
* board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
28c7a1e9c3
Fix crash after empty REPL session
...
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
dcc8abf74e
Merge pull request #2638 from fgallaire/master
...
Arduino Nano 33 IoT support
2020-02-22 00:12:06 -05:00
96db16a7a2
Last NINA pins
2020-02-22 04:30:18 +01:00
f63b2c0d0c
use realloc instead
2020-02-21 17:36:15 -05:00
9cf46ec947
put neopixel_write buffer in root pointers
2020-02-21 08:44:25 -05:00
23d6a3dc1f
merge from upstream
2020-02-20 22:27:16 -05:00
39ec5d0e51
Add NINA pins
2020-02-21 01:34:52 +01:00
634d246910
relicense nrf SPI.c to MIT
2020-02-20 16:00:21 -05:00
1e7ec1b952
Merge pull request #2641 from arturo182/feather_m7_1011
...
mimxrt10xx: Add Feather M7 1011 board config
2020-02-20 10:15:57 -08:00
feac87901a
mimxrt10xx: Enable displayio
...
Closes #2466
2020-02-19 22:26:00 +01:00
aa0cf38084
mimxrt10xx: Add Feather M7 1011 board config
2020-02-19 22:08:08 +01:00
4552aff125
Merge pull request #2629 from mubes/rtsctsrs485
...
Addition of RTS/CTS/RS485 capability
2020-02-19 10:35:57 -08:00
fba0b302ff
Add Arduino Nano 33 IoT support
2020-02-19 08:56:06 +01:00
63bcd52a5a
Add Arduino Nano 33 IoT documentation
2020-02-19 08:50:27 +01:00
1f148242db
Merge pull request #2605 from maholli/master
...
New board: PyCubed + updates to SAM32 board
2020-02-18 22:01:41 -05:00
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
f0e5341b0f
Addition of support for imxt1010, 1050 and 1060 families
2020-02-18 23:16:40 +00:00
d388899985
Addition of RS485 support
2020-02-18 23:16:40 +00:00
84ad3d8393
Addition of RTS/CTS/RS485 UART functionality
2020-02-18 23:16:40 +00:00
2b79d8ffe9
adding PWM to board.c for external WDT
2020-02-18 14:16:54 -08:00
2063867899
Merge pull request #2618 from mubes/alignment-warning
...
Fix alignment warning
2020-02-18 13:54:24 -08:00
93760042fa
no current need for NVM
2020-02-16 11:43:19 -08:00
77ad9aff3c
Formatting updates
2020-02-16 00:40:04 +00:00
d13f04f953
Updated formatting
2020-02-14 23:02:02 +00:00
dc97b0d844
correct chec^Cfor flash erase boundaries
2020-02-13 17:41:05 -05:00
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
a0760206c6
Merge pull request #2597 from hierophect/stm32-espruino-wifi
...
STM32: Espruino Wifi
2020-02-13 11:17:59 -08:00
a65ca3ab19
Merge pull request #2617 from dhalbert/nrf-large-spi-transactions
...
use properly-sized SPI transactions
2020-02-12 23:29:29 -05:00
4de2a1eb62
Fix alignment warning
2020-02-12 22:36:34 +00:00
afc1c88046
remove bad define
2020-02-12 15:56:24 -05:00
fd2982f5c9
revert cross-board flag strategy
2020-02-12 15:12:05 -05:00
e00b3269fe
use properly-sized SPI transactions
2020-02-12 15:04:19 -05:00
6d91ed2156
move defaults to avoid conflict
2020-02-12 14:38:27 -05:00
b248486c3b
cleanup flag changes
2020-02-12 14:32:50 -05:00
b7bb85a4da
Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi
2020-02-12 14:31:08 -05:00
7831c475b9
change flag styling
2020-02-12 14:30:29 -05:00
35abc48a65
Merge pull request #2589 from hierophect/stm32-temperature-us
...
STM32: Core temperature and voltage
2020-02-12 10:55:00 -08:00
01507a91db
Merge pull request #2612 from mubes/loadable-binary
...
Add directly loadable binary target for imxrt family
2020-02-12 10:41:59 -08:00
4bc093675c
Merge branch 'master' into stm32-temperature-us
2020-02-12 12:13:56 -05:00
d0870ce484
Update main .bin output file to be bootable artefact
2020-02-12 09:03:11 +00:00
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
f3e4fbd7ba
Add directly loadable binary target
2020-02-11 23:01:08 +00:00
8364c60eb2
Merge pull request #2570 from hierophect/stm32-f407-disco
...
STM32: Add STM32F4Discovery support
2020-02-10 17:19:00 -08:00
c4436910c3
create F407 specific files
2020-02-10 12:44:23 -05:00
80ba4c8661
Merge pull request #2 from adafruit/master
...
merging from upstream
2020-02-10 09:41:16 -08:00
3f700e7e68
fix missing parameter
2020-02-10 12:16:00 -05:00
b4c60c3355
Merge remote-tracking branch 'upstream/master' into stm32-espruino-wifi
2020-02-10 11:52:32 -05:00
baf8d9ef5f
Merge remote-tracking branch 'upstream/master' into stm32-temperature-us
2020-02-10 11:45:49 -05:00
3bf4b42e2e
change OH20 badge pin defs to use SWn for buttons
...
Rather than use A, B, C and D
Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
0a54f88751
add pin defs for buttons on the OHS2020 badge
2020-02-10 00:32:16 +01:00
b91c4e66cb
adding Adafruit_CircuitPython_Register to frozen + updating SAM32
2020-02-08 16:09:47 -08:00
84fa0c187e
adding new board - PyCubed
...
open source and radiation tested hardware + software platform for small satellites called CubeSats. See pycubed.org for more info. See quickstart.pycubed.org for lots of circuitpython examples
2020-02-08 15:33:25 -08:00
b93d6e861b
Merge pull request #2596 from hierophect/stm32-espruino-pico
...
STM32: Espruino Pico
2020-02-07 14:14:49 -05:00
51004f8336
Merge pull request #2601 from dhalbert/monotonic_ns-improvement
...
Monotonic ns improvement; time.sleep rounds to nearest msec
2020-02-07 11:03:37 -08:00
71672fd244
Merge pull request #2599 from ladyada/master
...
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-07 12:59:30 -05:00
b245f9ca5b
Merge pull request #2591 from neubauek/master
...
Added CircuitBrains Basic and Deluxe Boards
2020-02-07 12:47:20 -05:00
005c4caf8c
fix function defs for compiler
2020-02-07 10:32:37 -05:00
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
41b5f73785
revert mixed up linkers
2020-02-06 18:47:06 -05:00
789e311b63
update rotation so 0 is the default, for much faster ondiskbitmaps
2020-02-06 16:28:02 -05:00
d93d491a61
Cleaned up CircuitBrains Basic and Deluxe board definitions
2020-02-06 14:47:22 -06:00
848577e830
Update PID
2020-02-06 12:55:36 -05:00
aee26b1c79
Add proper PID
2020-02-06 12:25:17 -05:00
4122f85888
Create board definitions, add to board list
2020-02-06 12:19:19 -05:00
383854ac50
Add espruino pico to board list
2020-02-06 11:25:07 -05:00
08cf152aa8
Document flashing process
2020-02-06 11:11:51 -05:00
698ad745f6
Fix oscillator issue, add button and LED pins
2020-02-06 10:49:03 -05:00
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error
...
Add another error message to BLE
2020-02-05 23:39:17 -05:00
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
72a1bdab30
Add another error message for extended advertisements at the same
...
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
cdd1622350
Fix oscillator oversight in clocks.c
2020-02-05 18:12:48 -05:00
e28d244a0d
Add espruino pico pinout
2020-02-05 18:03:54 -05:00
f3188669e4
Added CircuitBrains Basic and Deluxe Boards
2020-02-05 14:52:47 -06:00
788464a594
board uses VBUS
2020-02-05 15:45:27 -05:00
cedf6489f7
Add voltage ADC, standardize mphalport
2020-02-05 12:39:12 -05:00
b6da2fa173
nrf: fix i2c frequency setting
2020-02-05 11:25:31 -05:00
4ba050d46d
Add ADC for temp sensor
2020-02-04 16:26:24 -05:00
65045eb3bc
Merge pull request #2568 from hierophect/stm32-loader-linkers
...
STM32: UF2 build option for STM32F405
2020-02-04 12:21:45 -08:00
6f73126756
add correct PID
2020-02-04 10:46:44 -05:00
c1fded5062
Merge branch 'stm32-loader-linkers' into stm32-f407-disco
2020-02-04 10:40:19 -05:00
3ce6fc89a4
Implement new linker for external flash only
2020-02-04 10:38:45 -05:00
a4ebd2f7c1
allow tuple or list for Palette color
2020-02-03 22:09:53 -05:00
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
5a29b222eb
add bluefruit sense - tested
2020-02-03 13:52:30 -05:00
64cafe82bc
Adjust OHS2020 madctl for default rotation
...
Make to go faster I guess.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
6804b2a7fd
Add I2C pin definitions for interoperability with Adafruit libraries
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
33dcdd7c03
Updates to enable working SPI TFT
...
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.
As fixed the improper SPI bus pins definitions and it works!
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
d99c2ffe4f
QSPI flash fixes
...
We had the pin names swapped on the schematic and a different flash was populated.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
dc964b346c
adjust CLUE madctl so rotation 0 is 'right'
2020-01-31 20:17:39 -05:00
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
fa11912b9b
New configuration values
2020-01-31 17:28:42 -05:00
61944ef08e
Merge branch 'stm32-loader-linkers' into stm32-f407-disco
2020-01-31 16:38:17 -05:00
8258cb851e
Merge pull request #2569 from dhalbert/nrf-increase-connections
...
increase max BLE connections from 2 to 5
2020-01-31 15:59:27 -05:00
4abd5f1f7b
increase max connections from 2 to 5
2020-01-31 14:58:23 -05:00
cabc3aa90e
Merge branch 'stm32-loader-linkers' of https://github.com/hierophect/circuitpython into stm32-loader-linkers
2020-01-31 14:36:03 -05:00
41aefc819b
Fix pyboard
2020-01-31 14:35:54 -05:00
19553b8f7c
WIP
2020-01-31 14:33:10 -05:00
c1cf80180d
Merge branch 'stm32-loader-linkers' into stm32-f407-disco
2020-01-31 14:10:21 -05:00
ab031bc25f
Create basic board profile
2020-01-31 14:04:54 -05:00
f38e12f0ab
Update ports/stm32f4/boards/STM32F405_boot.ld
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-01-31 13:56:08 -05:00
a10e5d1da2
text fixes
2020-01-31 13:17:43 -05:00
7085d91278
dangling edit
2020-01-31 13:13:51 -05:00
b4dcecb266
Add build option for UF2 flash offset
2020-01-31 13:12:58 -05:00
d8016bd52b
Merge branch 'master' into stm32-loader-linkers
2020-01-31 12:21:46 -05:00
3b95d7c16a
add gamepad to specialty cpx builds; update frozen libs
2020-01-30 21:00:47 -05:00
b6358182d3
Update CLUE to Rev C
2020-01-30 15:22:26 -05:00
55eb1730b8
Merge remote-tracking branch 'adafruit/master' into tweak_pixelbuf
2020-01-30 10:59:21 -08:00
298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes
...
nrf: track vm_used_ble better
2020-01-30 10:33:19 -08:00
87f73e2729
track vm_used_ble better
2020-01-30 09:52:06 -05:00
5d24ade5c9
Tweak error messages to reduce code size.
2020-01-29 17:32:07 -08:00
1a25d3ca83
fix merge issue
2020-01-29 18:46:14 -05:00
898f4e1f72
Merge branch 'master' into stm32-meowbit
2020-01-29 16:32:08 -05:00
100409961a
Move board_init to main.c
2020-01-29 16:29:43 -05:00
Scott Shawcroft
arturo182
Sean Cross
cyz
Dan Halbert
Scott Shawcroft
Lucian Copeland
Jeff Epler
warriorofwire
Daniel Pollard
DavePutz
Max Holliday
Dan Halbert
Yihui Xiong
JoeBakalor
TG-Techie
Mark Olsson
Radomir Dopieralski
Jeff Epler
Sabas
sabas1080
Brian Dean
Jeff Epler
Thea Flowers
siddacious
Chris Burton
William Moser
jgillick
Szymon Klause
TG-Techie
Dave Marples
ladyada
Florent Gallaire
Drew Fustini
neubauek
James Bowman
Michael Welling