circuitpython

Author	SHA1	Message	Date
lady ada	999ee68e12	try adding new feather def	2021-01-09 12:22:53 -05:00
foamyguy	13efbf24e5	disable msgpack on boards without room	2021-01-09 10:33:56 -06:00
Caio Henrique de Queiroz Katayama	7b4558b750	Fix socket.recvfrom_into()	2021-01-08 19:17:17 -05:00
anecdata	06ab848a0d	added platform	2021-01-08 16:48:25 -06:00
jerryneedell	de5b138dcf	remove commented line	2021-01-08 14:46:37 -05:00
jerryneedell	7556f38f04	initialize LDO2 in board_init()	2021-01-08 14:40:06 -05:00
Dan Halbert	39c166ba6a	update tinyusb; _ticks_enabled only for SAMD21	2021-01-08 13:30:11 -05:00
Jeff Epler	5f0e41ad60	I2SOut: Enable ticks during audio playback .. otherwise, the background callback to load the I2S fifos does not get run. (I'm not sure this is _correct_ behavior of sleep + background tasks, but it is the current behavior)	2021-01-08 09:01:34 -06:00
Jeff Epler	430bcdb59d	port_i2s_play: fill the initial buffer via background callback There were _possibly_ problems where this routine was being entered by direct call AND by background callback. Schedule the work here, and it will be done almost immediately, without worry about interference. I don't know if this is strictly necessary, but it doesn't hurt. Since the I2S clock is being run all the time, we have to enter the background task to fill the FIFO with zeros constantly anyway.	2021-01-08 08:49:25 -06:00
Jeff Epler	12264cca34	port_i2s_play: remove build error	2021-01-08 08:47:13 -06:00
Jeff Epler	0b7a4c4b2b	i2s_fill_buffer: remove debug print	2021-01-08 08:46:56 -06:00
Jeff Epler	873a300d02	i2s_fill_buffer: Need to fill with zeros when stopping	2021-01-08 08:46:41 -06:00
Jeff Epler	cfd8288dfa	esp2s2: enlarge stack-buffer, use it instead of i2s_zero_dma_buffer .. it's not clear that there was a problem with i2s_zero_dma_buffer, but just in case.	2021-01-07 16:29:52 -06:00
Jeff Epler	d3afda61d8	esp32s2: i2s: must reset buffer, otherwise wave samples don't start .. and other housekeeping when starting to play a sample	2021-01-07 16:29:08 -06:00
Jeff Epler	352226402c	esp32s2: i2s: fix accounting for "stretched" frames	2021-01-07 16:28:33 -06:00
Jeff Epler	010a4e7b0f	esp32s2: port: Ensure JTAG pins are available for debugging	2021-01-07 16:23:21 -06:00
Bernhard Boser	c7dc5f2507	support RTS/CTS hardware flow control	2021-01-07 14:13:19 -08:00
BennyE	115f3e0867	Updated code as per helpful suggestion	2021-01-07 23:05:16 +01:00
Jeff Epler	7bb196b9d2	esp32s2: 'make flash': Allow customizing the esptool flags This can be useful so that e.g., on a Kaluga when programming via the FTDI chip, you can override the variable to specify "--after=hard_reset" to automatically return to running CircuitPython, choose a different baud rate (921600 is about 2s faster than 460800), etc: make BOARD=espressif_kaluga_1 ESPTOOL_FLAGS="-b 921600 --before=default_reset --after=hard_reset"	2021-01-07 15:01:33 -06:00
Jeff Epler	30c6dd3f76	Merge remote-tracking branch 'origin/main' into audioout-esp32	2021-01-07 14:11:14 -06:00
jerryneedell	6976ec6ef9	Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led	2021-01-07 15:02:40 -05:00
Scott Shawcroft	55c80754c7	Merge pull request #3945 from 2bndy5/fix-table-in-a-readme convert esp32s2 port readme to rst	2021-01-07 10:43:34 -08:00
Scott Shawcroft	0b0b476be6	Merge pull request #3940 from caternuson/magtag_accelo_irq_pin Add MagTag accelo IRQ pin	2021-01-07 10:31:33 -08:00
Dan Halbert	5358524941	Merge pull request #3939 from dhalbert/tick-overflow overflowed tick counter needs 64 bits everywhere	2021-01-07 13:01:30 -05:00
brendan	18122e0455	missed a couple inline code snippets	2021-01-06 15:28:19 -08:00
brendan	092331eee1	convert esp32s2 readme to rst	2021-01-06 15:19:40 -08:00
BennyE	66d87782be	Adding authmode keyword	2021-01-06 23:52:30 +01:00
caternuson	9db0a4f265	add magtag accelo irq pin	2021-01-06 09:17:19 -08:00
Scott Shawcroft	a33359762d	Merge pull request #3903 from anecdata/reasons ESP32-S2: Log all Wi-Fi events & remove unneeded call	2021-01-06 08:41:19 -08:00
Dan Halbert	9a1d864331	overflowed tick counter needs 64 bits everywhere	2021-01-06 11:09:06 -05:00
jerryneedell	14e2a02c04	Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led	2021-01-06 05:47:37 -05:00
anecdata	98c9492a8c	change ESP_EARLY_LOG* to ESP_LOG* throughout event_handler	2021-01-05 18:39:51 -06:00
iot49	1a82555803	Merge branch 'main' into msgpack	2021-01-05 11:19:11 -08:00
Kattni Rembor	bbd4de33d1	Add adafruit_bus_device to CPX builds.	2021-01-04 15:53:39 -05:00
jerryneedell	ec02102409	implment use of DotStar for staus led	2021-01-04 07:41:25 -05:00
Limor "Ladyada" Fried	dcf88e1e91	Merge pull request #3923 from bwshockley/Add_dotstar_mini_sam_m4 Add dotstar mini sam m4	2021-01-03 19:40:43 -05:00
Seon Rozenblum	10f178d162	Fixed incorrect pin assignment on header IO13 is for blue LED IO14 is the correct pin header between IO18 and IO12 The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c Silk will be updated on next PCB production run	2021-01-04 10:06:32 +11:00
Benjamin Shockley	9286f26831	Added CP Dotstart Lib to Build Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED.	2021-01-03 10:42:58 -06:00
askpatricw	2ce07209df	changes based on UM's input	2021-01-01 17:23:11 -08:00
askpatricw	220501e159	dupe LED entries	2020-12-31 18:02:44 -08:00
askpatricw	43f93b097f	release and pre-release FeatherS2 NSync	2020-12-31 17:50:41 -08:00
Jeff Epler	5698b8bb0a	Merge pull request #3850 from microDev1/touch-s2 Support for Touch Alarm	2020-12-30 16:25:11 -06:00
microDev	0bad6110d4	update wake-alarm implementation	2020-12-31 02:44:20 +05:30
microDev	b83bdc540d	enable light-sleep functionality	2020-12-31 02:22:20 +05:30
Dan Halbert	fb216148ec	Merge pull request #3900 from jepler/restore-frozen-busdevice Restore frozen adafruit_bus_device module	2020-12-30 13:22:46 -05:00
microDev	28ce5e8988	Merge branch 'main' into touch-s2	2020-12-30 22:44:22 +05:30
Jeff Epler	83c6774a44	Revert "Removing frozen libs" This reverts commit `23ed3ef971`.	2020-12-30 10:55:28 -06:00
microDev	c7f68022ef	add pretend-to-sleep functionality	2020-12-30 22:11:22 +05:30
anecdata	d537d94a4c	see what we're missing	2020-12-30 09:45:15 -06:00
anecdata	0914b71653	remove unneeded set_config (wrong param; called in connect anyway)	2020-12-30 09:26:25 -06:00
Hugo Dahl	72cad49c69	Fix minor typo in ESP32S2 readme	2020-12-29 22:52:59 -06:00
Jeff Epler	a7542598a0	esp32s2: add I2SOut	2020-12-29 14:46:38 -06:00
Jeff Epler	b40a579d18	esp32s2: espidf: Consistent error checking of esp-idf calls By surrounding most ESP-IDF API calls with this new macro, their failure will result in a CircuitPython exception.	2020-12-29 14:06:32 -06:00
Jeff Epler	05ba1431c3	esp32s2: espidf: Add IDFError this is an exception class for "generic" IDF errors that don't have their own exception type.	2020-12-29 14:06:32 -06:00
Jeff Epler	d024df6b06	esp32s2: Use better optimizer flags in debug builds (note that the before and after files both lack trailing newlines; this is how the esp-idf do) OPTIMIZATION_DEFAULT is -Og, which enables optimizations that do not interfere with the debugger: ``` elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT) list(APPEND compile_options "-Og") ```	2020-12-29 14:06:32 -06:00
Jeff Epler	7401aa8e85	Merge pull request #3888 from microDev1/fix-reset-pin FIX : common_hal_reset_pin()	2020-12-29 10:08:47 -06:00
Scott Shawcroft	f9d9c031a9	Merge pull request #3878 from xobs/fomu-fixes-6.0.0 Fomu fixes for 6.0.0	2020-12-28 11:51:26 -08:00
Scott Shawcroft	c3396e4b49	Merge pull request #3868 from BennyE/wifi-enhancement-countrycode esp32-s2: wifi enhancement to include countrycode	2020-12-28 11:49:41 -08:00
Dan Halbert	171efd55e0	Merge pull request #3830 from tannewt/pin_alarm Add pin alarming	2020-12-28 12:59:27 -05:00
microDev	dc332baa87	update common_hal_reset_pin()	2020-12-28 20:04:00 +05:30
Scott Shawcroft	6c7e6abcfd	Downgrade OTA API for IDF 4.2	2020-12-27 20:30:49 -08:00
Uwe Gartmann	2729666d82	SAMD51: change of DAC power setting Fixes wrong DAC output levels at high data rate closes adafruit#3796	2020-12-25 17:53:43 +01:00
BennyE	64bb055700	Updating comment to reflect feedback of espressif from IDFGH-4486 -> works correct as per the protocol	2020-12-24 15:40:53 +01:00
Sean Cross	2f95cc95a4	litex: move more critical code to RAM The XIP SPI flash on Fomu is slow, which results in certain operations taking a long time. This becomes a problem for time-critical operations such as USB. Move various calls into RAM to improve performance. This includes the call to __modsi3 and __udivsi3 which are used by the supervisor handler to determine if periodic callbacks need to be run. This finishes fixing #3841 Signed-off-by: Sean Cross <sean@xobs.io>	2020-12-24 14:06:57 +08:00
Sean Cross	f3e54414e5	litex: ensure we don't re-enable interrups during ISR During an interrupt handler, interrupts are implicitly disabled. They will be re-enabled when the interrupt handler returns. Due to some changes that were made, varous calls will re-enable interrupts after they're finished. Examples of this include calling `CALLBACK_CRITICAL_END` and getting the number of ticks with `port_get_raw_ticks()`. This patch prevents this from happening by doing two things: 1. Use standard calls in `port_get_raw_ticks()` to disable and re-enable interrupts, preventing nesting issues, and 2. Increase the nesting count inside `isr()`, reflecting the implicit call that is made by hardware when an interrupt is handled This helps to address #3841. Signed-off-by: Sean Cross <sean@xobs.io>	2020-12-24 14:03:10 +08:00
Dan Halbert	8061a2574d	Merge branch 'main' into pin_alarm	2020-12-23 22:05:02 -05:00
BennyE	1a6b1b1953	implementing suggested changes	2020-12-24 00:37:37 +01:00
Dan Halbert	a11ad25727	BLE fixes	2020-12-23 16:39:27 -05:00
Scott Shawcroft	1a8033470a	Stub out mp_hal_is_interrupted for UNIX	2020-12-23 12:22:50 -08:00
Scott Shawcroft	eb65765d52	Merge pull request #3867 from dhalbert/frequencyin-fix-6.0.x FrequencyIn: do not raise in interrupt handler	2020-12-23 12:14:16 -08:00
BennyE	e9c9fce15d	Remove debug log messages	2020-12-23 14:59:09 +01:00
Scott Shawcroft	1fca297a2d	A couple sleep fixes * Better messaging when code is stopped by an auto-reload. * Auto-reload works during sleeps on ESP32-S2. Ticks wake up the main task each time. * Made internal naming consistent. CamelCase Python names are NOT separated by an underscore.	2020-12-22 16:13:02 -08:00
Dan Halbert	89079039ad	FrequencyIn: do not raise in interrupt handler	2020-12-22 18:54:42 -05:00
Scott Shawcroft	8b03951fee	Merge pull request #3866 from jepler/use-stub esp32s2: make flash: use the stub	2020-12-22 10:16:54 -08:00
Jeff Epler	da8f023665	esp32s2: make flash: use the stub Very long ago, this was apparently not supported in esptool yet, at least when operating over USB CDC. This now works just fine, and our esp webtool relies on it as well. It makes flashing faster, too.	2020-12-22 10:27:42 -06:00
Dan Halbert	d4e9eea397	mark alarm.wake_alarm during gc sweep	2020-12-22 08:11:01 -08:00
Jonathan Giles	aaa3c61819	Add default I2C pins for STM32F411CE	2020-12-22 09:11:05 -05:00
Dan Halbert	d6df43b943	Merge pull request #3863 from dhalbert/adafruit-prefix Add Adafruit to MICROPY_HW_BOARD_NAME for various boards	2020-12-22 08:02:35 -05:00
Dan Halbert	39ca406a31	Add Adafruit to MICROPY_HW_BOARD_NAME for various boards	2020-12-21 23:32:11 -05:00
Scott Shawcroft	6347a3fcdb	Merge pull request #3812 from microDev1/ota-s2 Support for OTA update	2020-12-21 18:46:13 -08:00
Scott Shawcroft	fb0c74c5f1	Merge pull request #3662 from ElectronicCats/bastble Add new board BastBLE	2020-12-21 17:39:08 -08:00
BennyE	ae3b440835	more fixes and still with debug	2020-12-22 00:32:48 +01:00
Lucian Copeland	75620884e6	Fix stubs, recv_into error	2020-12-21 13:26:43 -05:00
Lucian Copeland	32736dd2c3	Implement server API	2020-12-20 17:12:03 -05:00
sabas1080	d24a5d6270	update path board.h	2020-12-20 15:52:19 -06:00
BennyE	2e393ed195	adding debug infos	2020-12-20 22:03:38 +01:00
sabas1080	bd3c5c33fb	define QSPI pinout	2020-12-20 14:57:10 -06:00
sabas1080	88b1e2fe61	remove Internal flash unnecessary	2020-12-20 13:35:15 -06:00
microDev	ecd7c0878e	expose wake pin parameter and more tweaks	2020-12-19 20:54:36 +05:30
microDev	a60fabdffa	add touch alarm support for esp32s2	2020-12-19 12:56:34 +05:30
Dan Halbert	f202eb734a	Merge pull request #3842 from StackRduino/main add stackrduino_m0_pro	2020-12-18 12:33:34 -05:00
microDev	8eaf2b0c19	implement touch alarm	2020-12-18 12:54:36 +05:30
microDev	4512290ba0	Merge branch 'main' into ota-s2	2020-12-18 00:44:00 +05:30
microDev	4863413bc9	rename ota to dualbank	2020-12-18 00:34:56 +05:30
Dan Halbert	8f9cd7075e	Merge pull request #3752 from jepler/gcc10 build: Update to gcc10	2020-12-17 11:03:40 -05:00
Hany Elkomy	7afa1a1d76	Update mpconfigboard.mk reduced to CFLAGS_INLINE_LIMIT = 35 for tranaslations	2020-12-17 22:47:01 +08:00
Hany Elkomy	06022a5e91	Update mpconfigboard.mk changed CFLAGS_INLINE_LIMIT = 55	2020-12-17 21:58:24 +08:00
Hany Elkomy	81ff95a8eb	Add files via upload	2020-12-17 20:29:54 +08:00
Hany Elkomy	bc95c7f219	Delete board.c	2020-12-17 17:08:52 +08:00
Hany Elkomy	f3fb014166	Delete mpconfigboard.h	2020-12-17 17:08:50 +08:00
Hany Elkomy	1284418fa7	Delete mpconfigboard.mk	2020-12-17 17:08:48 +08:00
Hany Elkomy	736c0d4c3d	Delete pins.c	2020-12-17 17:08:46 +08:00
Hany Elkomy	0a7c74230c	Update mpconfigboard.mk updated for 6.1	2020-12-17 16:26:54 +08:00
Hany Elkomy	109e147b46	Update board.c updated path to board.h	2020-12-17 16:22:47 +08:00
Hany Elkomy	23ad9c7402	Update mpconfigboard.h removed whitespace	2020-12-17 15:17:04 +08:00
Hany Elkomy	3d9e4958c5	Add files via upload	2020-12-17 14:24:24 +08:00
Hany Elkomy	f3b7cd6a5d	Delete pins.c	2020-12-17 14:24:07 +08:00
Hany Elkomy	70739ff639	Update pins.c	2020-12-17 13:11:53 +08:00
Hany Elkomy	fac0bf1db8	Add files via upload	2020-12-17 12:37:32 +08:00
Scott Shawcroft	0dcc659d53	Swap to IDF release/4.2 branch for stability	2020-12-15 18:12:59 -08:00
Scott Shawcroft	1ad49d9a18	Add alarm.pin that wakes on pin level Fixes #3787	2020-12-15 18:12:59 -08:00
hierophect	3ad4b12ce1	Merge branch 'main' into esp-analog-hang	2020-12-15 15:08:30 -05:00
Dan Halbert	4521dfb732	squeeze some smaller boards	2020-12-15 13:23:49 -05:00
Dan Halbert	fb33c4e1c0	-ftree-vrp better diagnostics on -Os builds; -fno-inline-functions for -O2; fix struct init in HCI bleio	2020-12-15 12:23:56 -05:00
Jeff Epler	bbbd621b18	nrf: simmel: remove some unneeded modules to make it fit	2020-12-15 10:54:37 -06:00
Dan Halbert	97947b4fe9	shrink bast_pro_mini_m0; use proper flex-array syntax	2020-12-14 22:07:54 -05:00
Scott Shawcroft	d076296659	Merge pull request #3816 from dhalbert/sleepmemory alarm.sleep_memory + alarm.wake_alarm	2020-12-14 17:40:02 -08:00
Scott Shawcroft	d6ee17c6fd	Merge pull request #3817 from BennyE/reserve-pins-only-for-debug esp32s2: Reserve UART pins only if DEBUG=1 is set to address issue 3811	2020-12-14 17:32:17 -08:00
Scott Shawcroft	a1f773d9ed	Merge pull request #3819 from BennyE/issue3663 Fix for issue 3663 by returning early if no scan was started before s…	2020-12-14 17:11:18 -08:00
Scott Shawcroft	dc473b29e3	Merge pull request #3643 from hierophect/esp32-pin-reset ESP32-S2: Add IDF pin resets to Microcontroller	2020-12-14 17:09:29 -08:00
Dan Halbert	6abe3cd0ef	-Os for SAMD51; fix CSUPEROPT typo	2020-12-14 18:57:31 -05:00
Lucian Copeland	d793ec2872	Change pinfunc to default of 0 at reset	2020-12-14 14:25:38 -05:00
Lucian Copeland	cac755ba16	Merge remote-tracking branch 'upstream/main' into esp-analog-hang	2020-12-14 13:00:57 -05:00
Lucian Copeland	f15e2d86c0	Reduce samples from 64 to 2	2020-12-14 12:59:20 -05:00
Dan Halbert	e0afa32cfa	use RTC_DATA_ATTR; address review comments	2020-12-14 11:36:54 -05:00
BennyE	210c0ec89c	add country(code) to wifi network objects)	2020-12-13 13:32:12 +01:00
Thea Flowers	fe32dd08b8	Update Big Honking Button configuration to support its newest board revision. v5 of the BHB board has: * GD25Q64C instead of the GD25Q16C. * Pin PB10 tied to ground for board revision detection.	2020-12-12 19:16:35 -05:00
microDev	37ee5e683d	Merge branch 'main' into ota-s2	2020-12-12 05:25:46 +05:30
BennyE	c5c13620f2	Fix for issue 3663 by returning early if no scan was started before stop is issued	2020-12-12 00:49:53 +01:00
BennyE	81c4871fdf	Set DEBUG CFLAG if set in make	2020-12-11 22:11:39 +01:00
BennyE	e3194ad54e	Reserve UART pins only if DEBUG=1 is set to address issue 3811	2020-12-11 20:35:28 +01:00
Scott Shawcroft	344d3c59cb	Merge branch 'main' into msgpack	2020-12-11 11:10:30 -08:00
Dan Halbert	cf938983e9	SleepMemory + set alarm.wake_alarm	2020-12-11 08:10:26 -05:00
microDev	cb35abfd04	add docs, update translation & fix ota.flash()	2020-12-11 01:01:01 +05:30
Dan Halbert	55f4110983	fix typo	2020-12-10 14:16:25 -05:00
Dan Halbert	5964163649	Initial SleepMemory code	2020-12-10 13:03:40 -05:00
microDev	6a4f74946f	reset ota module on every vm run	2020-12-10 16:48:58 +05:30
microDev	07015ad527	add ability to switch boot partition	2020-12-10 16:42:45 +05:30
microDev	bfa2c604ef	add ability to flash in discontinuous chunks	2020-12-10 15:45:25 +05:30
microDev	ed5add37f6	add ability to flash in continuous chunks	2020-12-10 14:36:49 +05:30
microDev	dee86a014b	factor out esp_ota_end	2020-12-10 14:04:24 +05:30
microDev	20c3184c87	re-organize and clean-up	2020-12-10 12:34:56 +05:30
Scott Shawcroft	e14b148e62	Merge pull request #3803 from skieast/fix_i2c_hang_with_wifi Working, tested with two i2c busses	2020-12-09 10:03:31 -08:00
Scott Shawcroft	133013083a	Merge pull request #3808 from tannewt/panic_safe_mode Enter safe mode after panic or brownout	2020-12-08 16:31:22 -08:00
Scott Shawcroft	57101d7da6	Merge pull request #3807 from tannewt/sleep_tweaks Add `board_deinit` for use with sleep	2020-12-08 16:30:41 -08:00
Lucian Copeland	9a5006e241	Remove problematic calloc	2020-12-08 17:43:39 -05:00
Scott Shawcroft	0b4bcd9599	Fix build and more comments	2020-12-08 13:05:21 -08:00
Scott Shawcroft	d0a806d797	Enter safe mode after panic or brownout Uses the IDF's reset reason. Does nothing before reset. Fixes #3389	2020-12-08 11:03:24 -08:00
Scott Shawcroft	40118bcf57	Add `board_deinit` for use with sleep This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786	2020-12-08 10:52:25 -08:00
microDev	2f95c94ad8	esp32s2 - update common_hal_mcu_reset	2020-12-08 18:00:58 +05:30
microDev	602243748b	add ota support for esp32s2	2020-12-08 11:45:00 +05:30
microDev	fc23a0cc8a	implement ota module	2020-12-08 11:30:00 +05:30
Bruce Segal	571c063c2a	Working, tested with two i2c busses	2020-12-07 17:57:54 -08:00
Scott Shawcroft	44b56f76c4	Store safe mode state in the RTC. Also print backtrace before reset when DEBUG. This will help debug safe mode issues which calls reset.	2020-12-07 16:39:54 -08:00
Scott Shawcroft	22ad76bb48	Merge pull request #3800 from BennyE/wifi-better-logs Enhance debug log for wifi scan, sta_start, sta_stop	2020-12-07 12:32:15 -08:00
Lucian Copeland	c1a2ea27ce	Change to config-based resets	2020-12-07 13:57:47 -05:00
Lucian Copeland	c7b5928833	Fix submodule desync	2020-12-07 11:47:39 -05:00
Lucian Copeland	40a536904f	Merge remote-tracking branch 'upstream/main' into esp32-pin-reset	2020-12-07 11:45:27 -05:00
Dan Halbert	169b487509	Include wifi.radio singleton in gc	2020-12-07 11:07:56 -05:00
BennyE	70827ac3da	debug log for wifi scan, start stop	2020-12-06 23:38:04 +01:00
Scott Shawcroft	1130b80e2a	Merge pull request #3612 from gamblor21/bus_device Moving Adafruit_CircuitPython_BusDevice to core	2020-12-02 13:23:02 -08:00
Dan Halbert	348392f8cc	Merge pull request #3775 from tannewt/nina_certs Use nina-fw root certs	2020-12-02 16:13:19 -05:00
Dan Halbert	9b3186b625	Merge pull request #3776 from tannewt/backup_socket_timeout Two minor socket changes	2020-12-02 16:12:29 -05:00
Scott Shawcroft	608c98501b	Merge remote-tracking branch 'adafruit/main' into msgpack	2020-12-02 13:10:39 -08:00
Dan Halbert	31acfedf93	Merge pull request #3780 from tannewt/block_while_erasing Block all tasks (not interrupts) during flash erase	2020-12-02 16:10:25 -05:00
Bernhard Boser	34bbcc4910	exclude nrf/simmel due to lack of flash	2020-12-02 13:05:00 -08:00
Scott Shawcroft	d7ba641ff6	Merge pull request #3767 from dhalbert/sleep Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented	2020-12-02 12:51:43 -08:00
gamblor21	cb863e4c5c	Added to partial builds where frozen removed	2020-12-01 22:19:48 -06:00
Bernhard Boser	546b15bf1a	add trailing newline	2020-12-01 18:42:07 -08:00
Bernhard Boser	87d4184dd5	exclude spresense	2020-12-01 18:42:06 -08:00
Bernhard Boser	582a47d71a	rename read, write to read_bytes, write_bytes	2020-12-01 18:41:11 -08:00
Bernhard Boser	59c3e25168	disable on boards tight on memory. add stddef.h to imports (not actually needed).	2020-12-01 18:39:24 -08:00
Bernhard Boser	513253bc3f	moved logic to shared-module and added documentation	2020-12-01 18:38:14 -08:00
Bernhard Boser	90c203a3dd	add module msgpack	2020-12-01 18:38:14 -08:00
Scott Shawcroft	73e22f9eeb	Block all tasks (not interrupts) during flash erase Otherwise we risk running code from flash while an erase is in progress, crashing and corrupting the file system. Related to #3744	2020-12-01 18:15:06 -08:00
gamblor21	fe1c2fa6f0	Removed bus device from simmel build	2020-12-01 19:11:17 -06:00
Dan Halbert	8b7c23c1ee	address review comments	2020-12-01 20:01:14 -05:00
Mark	237385798c	Merge branch 'main' into bus_device	2020-12-01 15:47:16 -06:00
Scott Shawcroft	927624468d	Two minor socket changes * Remove BrokenPipeError and prefer to return the number of bytes received. (May be zero.) * Add two minute backup timeout to reduce the chance we hang on recv accidentally.	2020-11-30 18:39:50 -08:00
Scott Shawcroft	4ac4faaaf6	Use nina-fw root certs That way we have one set we use for all of Adafruit's connected devices.	2020-11-30 17:02:26 -08:00
Scott Shawcroft	5b3c930e38	Merge pull request #3738 from microDev1/fix-touch ESP32S2: Fix multiple touchpad don't work simultaneously	2020-11-30 16:03:16 -08:00
Scott Shawcroft	a975ef4971	Merge pull request #3695 from cwalther/movable Add movable supervisor allocations	2020-11-30 16:00:55 -08:00
Scott Shawcroft	98cf7f67d4	Merge pull request #3773 from dhalbert/no-samd21-complex-arithmetic Disable complex arithmetic on SAMD21 builds to make space	2020-11-30 13:47:56 -08:00
Dan Halbert	dbfabddf58	rename ESP TX and RX pins; remove support	2020-11-30 11:11:04 -05:00
Dan Halbert	9768951a2a	Disable complex arithmetic on SAMD21 builds to make space	2020-11-29 15:34:38 -05:00
Dan Halbert	848eb28132	esp-uart-pins	2020-11-28 14:52:56 -05:00
Christian Walther	c7404a3ff8	Add movable allocation system. This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap. By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.	2020-11-28 17:50:23 +01:00
Dan Halbert	28d9e9186e	Disable complex arithmetic on SAMD21 builds to make space	2020-11-28 10:12:46 -05:00
Dan Halbert	596e0e4bd2	merge from upstream	2020-11-27 16:06:57 -05:00
Dan Halbert	e308a9ec11	working! PinAlarm not implemented yet.	2020-11-27 16:03:37 -05:00
Dan Halbert	104a089677	deep sleep working; deep sleep delay when connected	2020-11-26 22:06:37 -05:00
microDev	e90cb3ad86	Merge branch 'main' into fix-touch	2020-11-26 11:33:45 +05:30
microDev	6af48bb24c	reset touchin on every vm run	2020-11-26 11:22:44 +05:30
Jeff Epler	7923aa0a62	Merge pull request #3708 from hierophect/esp32s2-udp ESP32-S2: Add UDP with recvfrom_into and sendto	2020-11-25 21:11:20 -06:00
Jeff Epler	6fd123a5c4	Merge pull request #3758 from tannewt/update_connect_doc Update wifi.Radio.connect doc	2020-11-25 21:09:56 -06:00
Scott Shawcroft	abff2615cb	Merge pull request #3754 from hierophect/esp-spi-pinclaim ESP32S2: fix pin claiming bugs	2020-11-25 15:11:29 -08:00
Dan Halbert	ef0830bfe2	merge from upstream + wip	2020-11-25 17:52:06 -05:00
Dan Halbert	9dbea36eac	changed alarm.time API	2020-11-25 15:09:27 -05:00
Lucian Copeland	a854da35d3	Fix masking issue causing pin claim problems	2020-11-25 12:14:56 -05:00
Lucian Copeland	c9bc877683	Merge remote-tracking branch 'upstream/main' into esp-spi-pinclaim	2020-11-25 10:43:35 -05:00
Scott Shawcroft	9a692c3222	Exit faster on recv when TLS connection closed When a TLS connection is closed by the server it usually sends a notice. We see this incoming byte with lwip_ioctl and try to read it. The read returns 0 but we keep trying anyway. Now, we quit trying when we get zero back. If the connection was still alive it'd either read a byte or delay until a byte could be read.	2020-11-24 18:14:22 -08:00
Scott Shawcroft	4ac11c8d31	Update wifi.Radio.connect doc Now it includes bssid info.	2020-11-24 17:54:39 -08:00
Jeff Epler	e778fc1f87	Merge pull request #3741 from hathach/fix-cdc-connection-race update tinyusb to fix cdc connection race	2020-11-24 19:11:41 -06:00
hierophect	510f464234	Merge branch 'main' into esp32s2-udp	2020-11-24 18:28:10 -05:00
Scott Shawcroft	8364734ba3	Merge pull request #3749 from skerr92/add-cpsapling-spiflash Add cpsapling spiflash	2020-11-24 15:22:21 -08:00
Jeff Epler	c451b22255	Disable 3-arg pow() function on m0 boards `pow(a, b, c)` can compute `(a ** b) % c` efficiently (in time and memory). This can be useful for extremely specific applications, like implementing the RSA cryptosystem. For typical uses of CircuitPython, this is not an important feature. A survey of the bundle and learn system didn't find any uses. Disable it on M0 builds so that we can fit in needed upgrades to the USB stack.	2020-11-24 16:54:33 -06:00
Scott Shawcroft	669f17e5bf	Merge pull request #3678 from microDev1/nvm-s2 ESP32S2: Support for NVM	2020-11-24 14:45:35 -08:00
Lucian Copeland	59458a9013	Add pin claiming to SPI construct	2020-11-24 16:46:11 -05:00
hierophect	d0e75e635a	Merge pull request #3714 from microDev1/ps2io-S2 ESP32S2: Support for PS/2-IO	2020-11-24 14:56:09 -05:00
Lucian Copeland	0c5e0954db	Add closed socket identification	2020-11-24 14:51:06 -05:00
Lucian Copeland	1031fe2992	correct submodule	2020-11-24 14:46:43 -05:00
Jeff Epler	0836abba41	Merge pull request #3720 from tannewt/more_wifi_retry Retry connection when getting NOT_AUTHED	2020-11-24 09:54:54 -06:00
Seth Kerr	686edcef3f	fixing PID issues with CI Test (whoops)	2020-11-24 07:41:32 -05:00
jgillick	f8499a468e	Remove filesystem from linker script.	2020-11-23 22:56:38 -08:00
microDev	bbe13490b5	Merge branch 'main' into nvm-s2	2020-11-24 12:24:48 +05:30
jgillick	570353b946	Merge remote-tracking branch 'circuitpython/main' into thunderpack1.2	2020-11-23 22:40:47 -08:00
microDev	6ff24410eb	use values pointer directly	2020-11-24 11:44:11 +05:30
microDev	9dd1783da5	Merge branch 'main' into ps2io-S2	2020-11-24 11:11:11 +05:30
Dan Halbert	7a45afc549	working, but need to avoid deep sleeping too fast before USB ready	2020-11-23 22:44:53 -05:00
Dan Halbert	ebdc48ae22	Merge pull request #3745 from kattni/magtag-pin-update Add pin names from silk	2020-11-23 19:48:12 -05:00
Seth Kerr	e5cee98977	removing icy tree files/directory	2020-11-23 19:31:06 -05:00
Seth Kerr	2635132ce5	adding 'haxpress' kind of build for CP Sapling for use with SPI Flash	2020-11-23 19:21:12 -05:00
Lucian Copeland	1c9f33a372	Replace reset with mux change	2020-11-23 19:01:30 -05:00
Lucian Copeland	86694262b8	Merge remote-tracking branch 'upstream/main' into esp32-pin-reset	2020-11-23 18:58:46 -05:00
Lucian Copeland	8ffd973e22	Merge remote-tracking branch 'upstream/main' into esp32s2-udp	2020-11-23 18:40:14 -05:00
Scott Shawcroft	a80bf22211	Merge pull request #3727 from BennyE/wifi-full-scan esp32s2: Do a full scan when channel/BSSID are not given	2020-11-23 15:19:57 -08:00
Scott Shawcroft	f8dcb25170	Merge pull request #3694 from jepler/update-ulab2 ulab: Update to release tag 1.1.0	2020-11-23 15:17:46 -08:00
Scott Shawcroft	491e314799	Merge pull request #3718 from jepler/epd-rotation EPaperDisplay: add rotation property	2020-11-23 15:04:26 -08:00
Scott Shawcroft	c67f5892ff	Merge pull request #3704 from microDev1/frequencyio-S2 ESP32S2: Support for FrequencyIO	2020-11-23 14:59:27 -08:00
Kattni Rembor	7928a0d454	Blank lines to group aliases.	2020-11-23 16:02:45 -05:00
Kattni Rembor	3730862362	Update to match silk rev 1	2020-11-23 15:56:36 -05:00
Kattni Rembor	efda912437	Add pin names from silk	2020-11-23 15:53:28 -05:00
Jeff Epler	16fe2de703	Merge pull request #3732 from skerr92/add-cpsapling adding CP-Sapling	2020-11-23 10:29:58 -06:00
Jeff Epler	70e978f48b	stm: disable ulab on two resource-constrained boards	2020-11-23 10:23:53 -06:00
jgillick	4c5e7520f5	Fix NVM by clearing FLASH_FLAG_PGPERR	2020-11-23 00:25:41 -08:00
Dan Halbert	3abee9b256	compiles; maybe ready to test, or almost	2020-11-22 21:52:37 -05:00
jgillick	661c20dd18	Create a new linker script with more space for the firmware.	2020-11-22 18:25:37 -08:00
Dan Halbert	25591a3f8a	Merge branch 'esp32s2-common-hal-mcu-delay-us' into sleep	2020-11-22 21:01:49 -05:00
Dan Halbert	a0f1ec3c4a	wip	2020-11-22 19:10:09 -05:00
Dan Halbert	f62ea25331	ESP32S2: common_hal_mcu_delay_us() now calls mp_hal_delay_us()	2020-11-22 19:08:27 -05:00
microDev	f3b5ca5f01	replace goto with conditional break	2020-11-22 19:20:21 +05:30
microDev	048ca2a570	get multiple touchpad working	2020-11-22 18:54:18 +05:30
jgillick	fe6e50b770	Update USB_PID	2020-11-22 01:49:23 -08:00
jgillick	56634eb00e	Rename thunderpack to v11	2020-11-22 01:31:41 -08:00
jgillick	381889f6bc	Cleanup	2020-11-22 01:19:28 -08:00
jgillick	0b858440b0	Fix formatting.	2020-11-22 01:15:05 -08:00
jgillick	63b0bf9075	Merge remote-tracking branch 'origin/main' into thunderpack1.2	2020-11-22 01:07:03 -08:00
Dan Halbert	75559f35cc	wip: ResetReason to microcontroller.cpu	2020-11-21 23:29:52 -05:00
Dan Halbert	e4c66990e2	compiles	2020-11-20 23:33:39 -05:00
Seth Kerr	1c92b1bf61	forgot to run pre-commit local	2020-11-20 15:35:52 -05:00
Seth Kerr	c4f4cdd8c1	readding cp_sapling directory	2020-11-20 15:31:49 -05:00
Seth Kerr	29e91424d4	removing cp sapling temporarily to read	2020-11-20 15:29:35 -05:00
Seth Kerr	b69bbfa3d6	fixed issues with trailing whitespace check	2020-11-20 15:17:44 -05:00
Seth Kerr	0a06530d52	adding CP-Sapling	2020-11-20 15:06:57 -05:00
BennyE	2773f534c9	Update ports/esp32s2/common-hal/wifi/Radio.c adding suggested changes	2020-11-20 09:40:32 +01:00
BennyE	6760cdf678	Let connect() choose strongest AP if channel and BSSID are not given	2020-11-20 00:11:17 +01:00
Dan Halbert	39e1f52e28	wip; not compiling yet	2020-11-19 17:47:12 -05:00
BennyE	17a8bafe05	Choose best AP in range if no channel/bssid given	2020-11-19 23:39:48 +01:00
Scott Shawcroft	2f14609044	Merge pull request #3716 from jepler/keep-event-loop esp32s2: don't delete the event loop	2020-11-19 14:28:31 -08:00
Jeff Epler	aaca3eccf1	samd: PDMIn: Reduce code unrolling on samd21 only Instead of unrolling the code 16 times, unroll it 4 times and loop over it 4 times. This gives the same 16 iterations, but at an expense of less flash space.	2020-11-19 16:19:37 -06:00
Jeff Epler	c06fc8e02d	Introduce, use mp_raise_arg1 This raises an exception with a given object value. Saves a bit of code size.	2020-11-19 16:15:06 -06:00
Jeff Epler	0556f9f851	Revert "samd21: Enable terse error reporting on resource constrained chip family" This reverts commit `9a642fc049`.	2020-11-19 15:12:56 -06:00
Dan Halbert	cd436bad1a	Merge remote-tracking branch 'adafruit/main' into sleep	2020-11-19 15:43:49 -05:00
Dan Halbert	649c930536	wip	2020-11-19 15:43:39 -05:00
microDev	a25b27520d	update nvm implementation	2020-11-20 00:22:00 +05:30
microDev	bc9036f353	use pointer to get nvs handle	2020-11-20 00:15:30 +05:30
Jeff Epler	dd108b755d	esp32s2: initialize event loop ane netif only once deinitting these seems to cause problems.	2020-11-19 11:36:02 -06:00
Kamil Tomaszewski	76d4824728	spresense: Return fixed stack	2020-11-19 15:04:52 +01:00
microDev	040eaa0443	re-organize and clean-up	2020-11-19 15:30:15 +05:30
microDev	b56645808c	fix crash on user code exit	2020-11-19 11:44:22 +05:30
Dan Halbert	5bb3c321e9	merge from main	2020-11-19 00:29:14 -05:00
Dan Halbert	682054a216	WIP: redo API; not compiled yet	2020-11-19 00:23:27 -05:00
Jeff Epler	9a642fc049	samd21: Enable terse error reporting on resource constrained chip family This reclaims over 1kB of flash space by simplifying certain exception messages. e.g., it will no longer display the requested/actual length when a fixed list/tuple of N items is needed: if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) { mp_raise_ValueError(translate("tuple/list has wrong length")); } else { mp_raise_ValueError_varg(translate("requested length %d but object has length %d"), (int)len, (int)seq_len); Other chip families including samd51 keep their current error reporting capabilities.	2020-11-18 20:37:36 -06:00
Scott Shawcroft	081aec4429	Retry connection when getting NOT_AUTHED I saw it once with a correct password. Retrying may still fail but at least it'll try first.	2020-11-18 16:39:34 -08:00
Jeff Epler	83d790ad8f	esp32s2: don't delete the event loop .. it seems to make the esp-idf grumpy.	2020-11-18 17:45:42 -06:00
microDev	0d3e81f969	update interrupt handling	2020-11-18 22:22:42 +05:30
microDev	bab41afce7	ps2io implementation for esp32s2	2020-11-18 12:34:56 +05:30
microDev	c457d373e1	update init_timer & frequency calculation	2020-11-18 12:24:48 +05:30
microDev	ff987e7496	add timer peripheral	2020-11-18 12:16:14 +05:30
Jeff Epler	9206925bf8	esp32s2: port_get_raw_ticks: Use a more efficient, monotonic routine While trying to debug #3572, I noticed that I would frequently break in the midst of gettimeofday and that the routine get_adjusted_boot_time had to take and release locks. Furthermore, we don't want "adjusted" boot time, which could go forwards or backwards depending on the adjustment (such as setting the clock used by gettimeofday() to the network time)	2020-11-17 17:45:41 -06:00
Jeff Epler	1bc770c3dc	esp32s2: PulseIn: Fix supervisor tick enabling Before, there were two problems: * Even if a pulsein was never constructed, supervisor_disable_tick would occur during restart. This could cancel out a supervisor_enable_tick from someplace else, with unexpected results. * If two or more pulseins were constructed, each one would enable ticks, but only the last one deinited (or the reset routine) would disable, leaving ticks running indefinitely. In my testing, it seemed that this led to the board sometimes stopping when it should have auto-reloaded.	2020-11-17 17:45:41 -06:00
Scott Shawcroft	e2b5ae2d77	Merge pull request #3689 from jepler/issue-3688 esp32s2: wifi: fix several debug-build errors	2020-11-17 13:26:43 -08:00
Lucian Copeland	0bbdf05936	Implement recvfrom_into and sendto for UDP	2020-11-17 16:11:04 -05:00
jgillick	5f0a372a22	Merge tag '6.0.0' into thunderpack1.2	2020-11-17 00:02:24 -08:00
jgillick	119e9d3820	Add Thunderpack 1.2	2020-11-16 23:50:00 -08:00
sabas1080	33ca357094	fix VID and PID	2020-11-16 22:10:37 -06:00
sabas1080	089fa82067	Fix pre-commit	2020-11-16 21:21:24 -06:00
Scott Shawcroft	66fb095069	Merge pull request #3667 from microDev1/watchdog-s2 ESP32S2: Support for WatchDog	2020-11-16 15:01:54 -08:00
Scott Shawcroft	f4fd236605	Merge pull request #3698 from BennyE/disablesoftap esp32s2: Set station mode early to avoid SoftAP on startup	2020-11-16 14:51:57 -08:00
Scott Shawcroft	f8eed1f74c	Merge pull request #3691 from jepler/issue-3424 esp32s2: Update esp-idf submodule to include fix for #3424	2020-11-16 14:21:13 -08:00
microDev	0686cde226	update internal nvm size	2020-11-17 01:19:12 +05:30
microDev	18e463cca5	add pcnt overflow handler & clean-up	2020-11-16 23:32:22 +05:30
Dan Halbert	ffff02c053	Merge remote-tracking branch 'adafruit/main' into sleep	2020-11-16 12:06:11 -05:00
Dan Halbert	bb77f1d130	wip: initial code changes, starting from @tannewt's sleepio branch	2020-11-16 11:56:20 -05:00
microDev	f2824f6a68	update frequency measurement	2020-11-16 12:55:55 +05:30
microDev	2bec02738f	move interrupt handler to iram	2020-11-16 11:44:11 +05:30
BennyE	d4ab00f734	Set station mode early to avoid SoftAP on startup	2020-11-16 00:31:06 +01:00
microDev	c4917cdabd	frequencyio implementation for esp32s2	2020-11-16 00:11:00 +05:30
Jeff Epler	231e3d362d	esp32s2: Update esp-idf submodule to include fix for #3424 This re-points the submodule to my personal fork of esp-idf. Users may need to `git submodule sync` in their existing trees when this change occurs. Adds just the following commit in esp-idf: > esp_crt_bundle: Allow verify_callback to correct BADCERT_BAD_MD	2020-11-14 10:16:39 -06:00
microDev	146adca060	Add watchdog mode raise	2020-11-14 11:41:14 +05:30
Scott Shawcroft	bda3267432	Save flash space * No weak link for modules. It only impacts _os and _time and is already disabled for non-full builds. * Turn off PA00 and PA01 because they are the crystal on the Metro M0 Express. * Change ejected default to false to move it to BSS. It is set on USB connection anyway. * Set sinc_filter to const. Doesn't help flash but keeps it out of RAM.	2020-11-13 18:57:52 -08:00
Scott Shawcroft	68eb809fbf	Update parallel bus signatures	2020-11-13 18:57:52 -08:00
Scott Shawcroft	8d4296f964	Add board.DISPLAY to MagTag. Fix luma computation * Initialize the EPaper display on the MagTag at start. * Tweak the display send to take a const buffer. * Correct Luma math * Multiply the blue component, not add. * Add all of the components together before dividing. This reduces the impact of truncated division.	2020-11-13 18:57:52 -08:00
Jeff Epler	0f7081781e	esp32s2: wifi: fix several debug-build errors Closes #3688 With this change, I don't get the ESP_ERROR_CHECK failed repeatedly running code that imports wifi. (I'm not getting a successful connection but that's probably my own fault, such as a secrets problem)	2020-11-12 20:40:45 -06:00
Scott Shawcroft	c9952798fb	Merge pull request #3683 from BHDynamics/dynossat_edu Rename pins on dynossat_edu_eps to make them the same as the Arduino core	2020-11-12 12:33:16 -08:00
Enrique Casado	aa68b17223	Freed some more space	2020-11-12 13:26:26 +01:00
Enrique Casado	9774736a50	Rename pins to make them the same as the Arduino core	2020-11-12 12:30:34 +01:00
microDev	ff41180237	pcnt reset on reload	2020-11-12 16:30:30 +05:30
Scott Shawcroft	a47dea4922	Merge pull request #3671 from FoamyGuy/um_feathers2_board_spi_i2c board.SPI() and board.I2C() for UnexpectedMaker Feather S2	2020-11-11 17:22:23 -08:00
microDev	35ef6c687f	nvm implementation for esp32s2	2020-11-11 23:11:12 +05:30
gamblor21	23ed3ef971	Removing frozen libs	2020-11-11 11:36:04 -06:00
gamblor21	f61c4e62c1	Removing from smaller builds	2020-11-11 10:24:33 -06:00
foamyguy	118ca7cff4	adding default uart pins	2020-11-11 06:56:57 -06:00
microDev	f9842566d8	Add default pin definitions	2020-11-11 10:22:48 +05:30
foamyguy	8373146c56	newline end of file	2020-11-10 15:29:17 -06:00
Scott Shawcroft	ddb3590944	Merge pull request #3647 from DavePutz/issue3579 Issue3579 - Check for CTRL-C During sleep on esp32s2	2020-11-10 13:09:57 -08:00
foamyguy	1192eebcdf	adding spi and i2c to board for um feather s2	2020-11-10 14:12:44 -06:00
Lucian Copeland	21ca1b8c2b	Merge remote-tracking branch 'upstream/main' into esp32s2-udp	2020-11-10 14:59:32 -05:00
Lucian Copeland	d16d27a449	Merge remote-tracking branch 'tannewt/esp32s2_udp' into esp32s2-udp	2020-11-10 14:51:36 -05:00
Scott Shawcroft	75a977febd	Merge pull request #3668 from jepler/esp32s2-stack-size esp32s2: Correct port_stack_get_top()	2020-11-10 10:56:12 -08:00
microDev	10e8b8cf45	move port specific check	2020-11-11 00:24:01 +05:30
root	fe7ed99939	Split out extern declare to ports/esp32s2/supervisor/esp_port.h	2020-11-10 12:45:39 -06:00
root	44425b8d94	Requested review changes made	2020-11-10 11:32:59 -06:00
Jeff Epler	2d8ebfcf63	esp32s2: Correct port_stack_get_top() Closes #3649	2020-11-10 10:42:53 -06:00
microDev	6c59836c5d	watchdog implementation for esp32s2	2020-11-10 16:32:46 +05:30
Scott Shawcroft	61bf0e99c6	Merge pull request #3653 from tannewt/magtag Rebrand EInk Portal to MagTag	2020-11-09 16:00:09 -08:00
Scott Shawcroft	d1f15d314b	Rename to include display details	2020-11-09 15:03:22 -08:00
microDev	7ba2c5772c	Update license	2020-11-08 11:18:05 +05:30
microDev	55e0e2c4ba	Update rotaryio implementation	2020-11-08 11:12:32 +05:30
sabas1080	6a6e998ea5	Added BastBLE	2020-11-07 19:21:36 -06:00
microDev	479567059e	Merge branch 'main' into rotaryio-S2	2020-11-08 00:00:01 +05:30
Scott Shawcroft	b2e83952c0	Rebrand EInk Portal to MagTag	2020-11-06 15:27:16 -08:00
Scott Shawcroft	01c7a06dcc	Merge pull request #3615 from microDev1/CountIO-S2 ESP32S2: Support for CountIO	2020-11-06 12:29:13 -08:00
root	d948e6570f	Changes to handle Ctrl-C during sleep	2020-11-05 21:27:21 -06:00
Dan Halbert	36a8828fa3	Merge pull request #3632 from dhalbert/add-binascii add binascii to most builds	2020-11-05 16:16:41 -05:00
microDev	ac8a0faa0d	update peripherals_pcnt_init()	2020-11-06 01:42:20 +05:30
Dan Halbert	81bb92bdd2	Merge pull request #3639 from tannewt/fix_recv Rework socketpool.Socket.recv to return sooner	2020-11-05 14:11:13 -05:00
Scott Shawcroft	8fc1be5ef2	Merge pull request #3645 from BradChan/main Modify the pins of the hiibot_bluefi.	2020-11-05 11:02:40 -08:00
root	c2aa54ae66	Check for Ctrl-C during sleeps	2020-11-05 11:10:40 -06:00
microDev	d8ef9a127b	rename pcnt_handler to pcnt	2020-11-05 10:10:39 +05:30
cyz	92cd599ea3	Modify the pins of the hiibot_bluefi.	2020-11-05 09:14:53 +08:00
Scott Shawcroft	e02539bdf5	Merge pull request #3633 from ITACAInnovation/patch-2 Update pins.c	2020-11-04 10:30:09 -08:00
microDev	fe6bfde590	move pcnt handler	2020-11-04 21:20:24 +05:30
Lucian Copeland	472a5a99ec	Add API reset to reset_pin_number	2020-11-03 16:31:53 -05:00
Scott Shawcroft	5a079256d5	Merge pull request #3642 from ehagerty/patch-1 Update README.md	2020-11-03 13:02:58 -08:00
ITACA Innovation S.R.L	ca935c0daf	Update pins.c Changed builtin to standard	2020-11-03 21:22:19 +01:00
Scott Shawcroft	441c2c41fb	Merge pull request #3641 from adafruit/6.0.x Merge 6.0.x bugfixes to main	2020-11-03 09:46:44 -08:00
Ed Hagerty	4055c5ac61	Update README.md	2020-11-03 17:14:58 +00:00
Limor "Ladyada" Fried	4938054c05	Merge pull request #3638 from ladyada/main io naming for gpio (credit to @kattni)	2020-11-03 09:17:33 -05:00
Limor "Ladyada" Fried	0d0436bf69	Merge pull request #3637 from hierophect/esp32s2-neopixel-parallel ESP32S2: Fix parallel strip issue with Neopixels	2020-11-02 23:39:37 -05:00
lady ada	c4521287e3	add rx/tx default uart names	2020-11-02 23:22:53 -05:00
Scott Shawcroft	7441344c6f	Add new config options to default	2020-11-02 17:22:24 -08:00
Scott Shawcroft	18838e390a	reduce connection footprint and fix recv	2020-11-02 16:44:55 -08:00
lady ada	6c61a53e0f	io naming for gpio (credit to @kattni)	2020-11-02 18:38:23 -05:00
Lucian Copeland	23afe08b6f	Add GPIO reset to end of neopixel-write	2020-11-02 17:15:19 -05:00
Dan Halbert	1f7a3f0dfa	Rev C Feather M4 CAN pin changes	2020-11-02 15:28:30 -05:00
Brian Dean	041c2a9f61	.../boards/bdmicro_vina_d51: PAD updates for better resource flexibility.	2020-11-02 08:35:25 -05:00
ITACA Innovation S.R.L	4e52757f26	Update pins.c Added LED, BOOST_EN and VEXT_SELECT pins.	2020-11-01 22:22:55 +01:00
Dan Halbert	72b829dff0	add binascii to most builds	2020-11-01 14:52:03 -05:00
microDev	4438050f79	Add pcnt handler	2020-11-01 18:00:07 +05:30
Jerry Needell	1762a36438	restore analogio to feather_m0_rfm9x/rfm69 builds	2020-11-01 05:46:13 -05:00
Dan Halbert	144eb131ae	Merge pull request #3627 from adafruit/6.0.x Merge 6.0.x bugfixes to main	2020-10-31 12:28:20 -04:00
ITACA Innovation S.R.L	9a8484b853	Update mpconfigboard.h Removed ignore PA30 PA31 in order to allow using them as pinout	2020-10-31 11:06:56 +01:00
ITACA Innovation S.R.L	a7616808e9	Updated pinout	2020-10-31 10:12:49 +01:00
Scott Shawcroft	09ae9aefa8	Merge pull request #3610 from Edrig/main Add new board to nrf port: holyiot_nrf52840	2020-10-30 12:03:34 -07:00
Scott Shawcroft	7fd73c7d39	Initial UDP work. Need to test	2020-10-28 18:08:31 -07:00
Dan Halbert	59b9ca409c	matrixportal ESP TX and RX pins were swapped	2020-10-28 20:33:10 -04:00
lady ada	25bad660c6	add light sensor, move batt monitor	2020-10-28 19:23:18 -04:00
Scott Shawcroft	7cbc50962b	Merge pull request #3611 from tannewt/esp32s2_eink_portal Add Adafruit ESP EInk Portal and grayscale EInk support	2020-10-28 14:45:29 -07:00
Gaetan	5ab2f16f64	Change Board Name to ADM_B_NRF52840_1 edit : .github/workflows/build.yml rename : ports/nrf/boards/holyiot_nrf52840/board.c -> ports/nrf/boards/ADM_B_NRF52840_1/board.c rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk rename : ports/nrf/boards/holyiot_nrf52840/pins.c -> ports/nrf/boards/ADM_B_NRF52840_1/pins.c	2020-10-28 22:08:10 +01:00
microDev	5e3bfa1956	countio implementation for esp32s2	2020-10-28 20:08:25 +05:30
Scott Shawcroft	9a4efed8cb	Start tweaking the workflow to sleep	2020-10-27 17:55:03 -07:00
Gaetan	b44011d196	fix railing Whitespace pin.c	2020-10-28 01:43:42 +01:00
Gaetan	b5c95e3b1a	Merge branch 'main' of https://github.com/Edrig/circuitpython into main modifié : boards/holyiot_nrf52840/pins.c	2020-10-28 00:40:46 +01:00
Gaetan	9b911b2211	modifié : pins.c	2020-10-28 00:38:07 +01:00
Gaetan	27827a4fef	Fix EOF error modifié : mpconfigboard.mk modifié : pins.c	2020-10-28 00:34:07 +01:00
microDev	930cf14dce	Add check for invalid io, function to disable all alarms	2020-10-27 16:17:26 -07:00
microDev	e35938971a	Add description of alarm modules	2020-10-27 16:16:55 -07:00
microDev	59df1a11ad	Add alarm_touch module	2020-10-27 16:16:52 -07:00
microDev	da449723df	Fix build error	2020-10-27 16:16:15 -07:00
microDev	4d8ffdca8d	restructure alarm modules	2020-10-27 16:15:09 -07:00
microDev	e5ff55b15c	Renamed alarm modules	2020-10-27 16:13:25 -07:00
microDev	21ba61afbb	Add function to disable alarm	2020-10-27 16:13:25 -07:00
microDev	05a3f203db	Add function to get time elapsed during sleep	2020-10-27 16:13:25 -07:00
microDev	e310b871c8	Get io wake working	2020-10-27 16:13:25 -07:00
microDev	90b9ec6f2c	Initial Sleep Support	2020-10-27 16:13:22 -07:00
Noel Gaetan	d0426b3438	Update pins.c fix mistake	2020-10-27 23:54:46 +01:00
Scott Shawcroft	557a58b244	Merge pull request #3591 from microDev1/TouchIO-S2 ESP32S2: Support for native TouchIO	2020-10-27 14:11:39 -07:00
Scott Shawcroft	73162bda85	Merge pull request #3584 from jepler/can-esp32s2 esp32s2: implement canio	2020-10-27 14:01:07 -07:00
Scott Shawcroft	54c0e98a37	Fix openbook build	2020-10-27 13:58:23 -07:00
microDev	80029f6929	rotaryio implementation for esp32s2	2020-10-28 00:12:13 +05:30
Jeff Epler	5110fec312	Merge pull request #3608 from adafruit/6.0.x Update main with latest 6.0.x	2020-10-27 11:47:44 -05:00
Jeff Epler	3a501a0495	esp32s2: canio: respond to review comments * explain the introduction of the temporary variable in get_t_config * get rid of unneeded __attribute__ * get rid of unneeded members of canio_can_obj_t * get rid of unneeded header inclusion	2020-10-26 19:18:37 -05:00
Jeff Epler	2ba6659967	esp32s2: Makefile: restore --no-stub	2020-10-26 19:07:37 -05:00
Scott Shawcroft	95cb5961d2	Fix ESP32-S2 SPI when DMA is sometimes used	2020-10-26 16:59:59 -07:00
Scott Shawcroft	fc591c8d84	Add EInk Portal	2020-10-26 16:59:59 -07:00
Gaetan	5deb045a81	Ready to PR * ../../.github/workflows/build.yml + boards/holyiot_nrf52840/board.c + boards/holyiot_nrf52840/mpconfigboard.h + boards/holyiot_nrf52840/mpconfigboard.mk + boards/holyiot_nrf52840/pins.c	2020-10-26 23:32:57 +01:00
Jeff Epler	caca0609bd	Merge pull request #3607 from hierophect/esp32-readme-clarity ESP32-S2: Fix readme link, improve instruction clarity	2020-10-26 12:43:51 -05:00
Lucian Copeland	32f2a8d54c	Fix readme link	2020-10-26 11:03:54 -04:00
Jeff Epler	396d92f867	esp32s2: Add canio This works in loopback mode, though the hardware filtering only permits a single address or mask filter.	2020-10-26 09:54:58 -05:00
microDev	ef97ed6ab6	Update touchio implementation	2020-10-23 13:17:49 +05:30
Scott Shawcroft	c8808f41a5	Merge pull request #3580 from astrobokonon/esp32s2-FixSTAMODE ESP32S2: Reset sta_mode and ap_mode flags	2020-10-22 13:48:45 -07:00
microDev	f431f859e7	Initial support for native touchio	2020-10-22 21:32:44 +05:30
Jeff Epler	fa4c4c2c10	Merge pull request #3587 from adafruit/6.0.x Merge in two fixes from 6.0.x	2020-10-21 20:12:20 -05:00
Jerry Needell	ff69ab603d	fix CPB SPI pin definitions	2020-10-21 17:07:30 -04:00
Scott Shawcroft	50e90088a2	Merge pull request #3586 from Targett363/esp32s2_module_clip Esp32s2 module clip	2020-10-21 12:58:23 -07:00
Ryan T. Hamilton	e202da4dad	Change comment wording	2020-10-20 15:14:35 -07:00
Ryan T. Hamilton	c58b0adf64	Reset sta_mode and ap_mode flags	2020-10-20 14:49:57 -07:00
Scott Shawcroft	1a677406bf	Merge pull request #3529 from jensechu/color-converter-transparency displayio: Pass transparent_color to ColorConverter	2020-10-20 10:41:57 -07:00
Scott Shawcroft	8beb36c240	Use one lto partition This leads to smaller code size at the expense of slower linking. We can turn partitioning back on with GCC10 because it produces smaller code.	2020-10-20 09:24:03 -07:00
Christian Walther	1eab0692b5	Fix missing `nproc` on macOS. `396979a` breaks building on macOS: `nproc` is a Linux thing, use a cross-platform alternative.	2020-10-20 16:39:32 +02:00
Targett363	a2fce305d6	Replacing placeholder PIDs with correct PIDs	2020-10-20 10:42:14 +01:00
Scott Shawcroft	eb139c9bab	Correct pins to not reset. They must have the PORT_ prefix otherwise they mask the wrong pins. Fixes #3552	2020-10-19 17:41:16 -07:00
Scott Shawcroft	d606a3e968	Merge pull request #3484 from astrobokonon/esp32s2-morenet Esp32s2: Expose more network parameters	2020-10-19 15:07:20 -07:00
Scott Shawcroft	d98b312886	Merge pull request #3541 from jepler/lto-parallel atmel-samd: parallelize lto linking	2020-10-19 15:05:45 -07:00
askpatricw	d6805c0dd4	SDA and SCL were flipped	2020-10-18 17:15:59 -07:00
Jeff Epler	cc411f47eb	samd: Update peripherals submodule (https://github.com/adafruit/samd-peripherals/pull/37)	2020-10-17 20:08:32 -05:00
Jeff Epler	fb768dfc14	samd: AnalogOut: Better handle boards which IGNOREd analog pins	2020-10-17 20:08:32 -05:00
Jeff Epler	194d99f588	sparkfun_lumidrive: Can't IGNORE pins that are default bus pins The SDA, SCL, and MISO pins were ignored. This error was not diagnosed before now.	2020-10-17 20:08:32 -05:00
Jeff Epler	eb0b023dee	samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins	2020-10-17 20:08:32 -05:00
Jeff Epler	4b9fc5de53	samd: update peripherals submodule this is possible now that the undefined reference to pin_PA30 has been resolved.	2020-10-17 20:08:32 -05:00
Jeff Epler	aa3c890ead	samd: pin: Fix 'undefined reference to pin_PA30' .. when PA30 is IGNOREd	2020-10-17 20:08:32 -05:00
Jeff Epler	396979a67e	atmel-samd: parallelize lto linking This decreases the link time, especially on desktop machines with many CPU cores. However, it does come at a slight cost in binary size, making the flash section about 200 bytes bigger for circuitplayground_express. Before, linking build-circuitplayground_express/firmware.elf takes 8.8s elapsed time, leaving 3128 bytes free in flash. After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free) If necessary, we can make this per-board or even per-translation to squeeze full builds.	2020-10-17 20:08:32 -05:00
Ryan T. Hamilton	76f1db7a87	Set sta_mode flag for actual use/checking	2020-10-17 00:23:31 -07:00
Scott Shawcroft	878f2322e7	Merge pull request #3564 from BHDynamics/dynossat_edu Add DynOSSAT-EDU boards	2020-10-16 11:30:42 -07:00
Scott Shawcroft	6e355ec598	Merge pull request #3560 from dhalbert/pervasive-bleio-hci enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit	2020-10-16 10:00:50 -07:00
Enrique Casado	6631c8d393	Add USB VID&PID	2020-10-16 13:52:46 +02:00
Ryan T. Hamilton	9d840aab0b	Cleaned up and now testing	2020-10-15 23:45:11 -07:00
Ryan T. Hamilton	b336039aab	Disable the long way and return an ap_info object still needs work and cleanup	2020-10-15 23:18:30 -07:00
Dan Halbert	12ed3fc72f	disable on winterbloom_sol and thunderpack	2020-10-15 18:48:28 -04:00
Scott Shawcroft	6b272eeb27	Merge pull request #3555 from UnexpectedCircuitPython/main Added default LWIP hostnames to FeatherS2 boards	2020-10-15 15:12:40 -07:00
Scott Shawcroft	31223e4ae5	Merge pull request #3530 from askpatrickw/hostname-example Set default hostname	2020-10-15 15:11:58 -07:00
Dan Halbert	1d05ad6b22	no _bleio for litex; ESP32S2 defines BIT() already	2020-10-15 16:34:19 -04:00
Seon Rozenblum	45a3bd1c04	Added default LWIP hostnames to FeatherS2 boards	2020-10-16 06:47:59 +11:00
Dan Halbert	f51e75c1d2	cxd56 needed more precise include for __packed; needed SRC_C += on some ports	2020-10-15 15:24:24 -04:00
Scott Shawcroft	b67acea587	Merge pull request #3547 from microDev1/wifiHost Add method to set custom hostname	2020-10-15 11:17:07 -07:00
Dan Halbert	82b49afe43	enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit	2020-10-15 11:27:21 -04:00
Enrique Casado	97fae54659	Add DynOSSAT-EDU boards	2020-10-15 12:39:14 +02:00
Dan Halbert	f1e8f2b404	Merge pull request #3554 from gamblor21/move_ordereddict Moved ORDEREDDICT define to central location	2020-10-14 22:39:04 -04:00
gamblor21	0a9bcc538b	Removed ordered dict for all SAMD21	2020-10-14 20:15:21 -05:00
gamblor21	e6d0b207ec	Removed MICROPY_PY_COLLECTIONS_NAMEDTUPLE__ASDICT from unix coverage	2020-10-14 14:06:34 -05:00
Scott Shawcroft	cc8f8d8604	Merge pull request #3549 from tannewt/stm_alarm_tweak Fix stm sleep too long	2020-10-14 11:12:26 -07:00
Brian Dean	852a91e1b7	boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen).	2020-10-14 08:29:28 -04:00
microDev	18fbff4f57	Update wifi hostname method	2020-10-14 11:11:59 +05:30
Limor "Ladyada" Fried	e9c04bc1f0	Merge pull request #3550 from bd34n/bdmicro_vina_d51 Add new board to atmel-samd port: bdmicro_vina_d51	2020-10-13 23:15:25 -04:00
gamblor21	4270061db4	Moved ORDEREDDICT define to central location	2020-10-13 18:52:27 -05:00
Scott Shawcroft	56427d9abe	Fix stm sleep too long	2020-10-13 14:02:29 -07:00
Brian Dean	2b33968a1e	Add new board to atmel-samd port: bdmicro_vina_d51	2020-10-13 16:46:25 -04:00
Scott Shawcroft	3d21eec3cd	Merge pull request #3546 from tannewt/rtc_irq Finer grained, per port tick locking	2020-10-13 13:39:32 -07:00
Scott Shawcroft	2bc40bcadf	Remove readreq when changing continuous	2020-10-13 10:15:34 -07:00
Scott Shawcroft	33dee4ae07	Merge pull request #3545 from tannewt/stm_rtc Fix STM RTC read so it's atomic.	2020-10-13 10:10:50 -07:00
microDev	ceb531086e	Add method to set custom hostname	2020-10-13 14:22:02 +05:30
Scott Shawcroft	379e73af2e	Finer grained, per port tick locking Fixes #3504 hopefully.	2020-10-12 18:43:21 -07:00
Scott Shawcroft	a0e5e961c5	Fix STM RTC read so it's atomic. Fixes #3376	2020-10-12 17:43:25 -07:00
Scott Shawcroft	9de96786ad	Merge pull request #3538 from jepler/parallel-qstrlast build: parallelize the qstr build steps	2020-10-12 15:52:43 -07:00
Scott Shawcroft	bb046f9983	Merge pull request #3540 from WarriorOfWire/async_syntax __await__ magic method and async/await	2020-10-12 15:31:43 -07:00
Scott Shawcroft	638c7f7b57	Merge pull request #3514 from hierophect/esp32-analogout ESP32-S2: AnalogOut	2020-10-12 15:08:50 -07:00
Jeff Epler	8ddbebd2c1	esp32s2: fix build after qstr rule changes	2020-10-12 13:35:15 -05:00
Kenny	10badd93c3	leftover newlines	2020-10-11 22:52:27 -07:00
Kenny	94beeabc51	remove unnecessary board configuration and address feedback	2020-10-11 22:42:59 -07:00
Kenny	3c46e3a6aa	Turn off async for circuitplayground express Firmware too large	2020-10-11 08:16:36 -07:00
Targett363	60deb321d1	adding USB PID VID	2020-10-10 23:55:05 +01:00
warriorofwire	f5f1e29dc0	disable async/await on a several small ucontrollers	2020-10-10 15:43:12 -07:00
Radomir Dopieralski	3f6ca7bd32	Make end-of-line-fixer happy	2020-10-10 23:59:44 +02:00
Targett363	5721cf0710	tidying up board names	2020-10-10 22:42:24 +01:00
Targett363	ead0d51fd7	Commenting out Neopixel in pins.c	2020-10-10 22:22:01 +01:00
Targett363	74954286f0	Putting the Saola Wrover files back and adding my Wrover board files this time	2020-10-10 21:44:14 +01:00
Targett363	f38e868e90	Actually adding Wrover board files this time	2020-10-10 21:28:26 +01:00
Targett363	b9e308c248	Adding Wroom and Wrover board files	2020-10-10 21:11:06 +01:00
Radomir Dopieralski	b227b79dec	Fix #3504 : Don't use time module in pew.tick() The time.sleep() and time.monotonic() functions break the timer interrupt on which PewPew10 display relies, so we can't use them anymore. Instead I'm adding a time-keeping function to the display code itself, which then can be used in pew.tick() internally.	2020-10-10 20:26:33 +02:00
lady ada	70a94c8d2d	fix for https://github.com/adafruit/circuitpython/issues/3534	2020-10-10 12:27:35 -04:00
Scott Shawcroft	c7d87cea62	Merge pull request #3532 from tannewt/samd21_autoreload Fix autoreload on SAMD21	2020-10-09 14:49:48 -07:00
Lucian Copeland	b435ef0272	Merge remote-tracking branch 'upstream/main' into esp32-analogout	2020-10-09 17:19:46 -04:00
Scott Shawcroft	375676ff58	Merge pull request #3501 from hierophect/esp32-analogin ESP32S2: Add AnalogIn	2020-10-09 14:10:24 -07:00
Scott Shawcroft	699f19f44a	Merge pull request #3522 from tannewt/imx_metro Unify iMX RT flash config and add Metro M7 1011	2020-10-09 13:48:58 -07:00
Scott Shawcroft	3ccf644dd0	Fix autoreload on SAMD21 The issue was that a time.sleep() would set the RTC wake up further into the future even if we wanted to tick every ms. Ticking every ms is used to time the autoreload delay and without it, autoreload doesn't work. Fixes #3528	2020-10-09 12:53:00 -07:00
Lucian Copeland	ccbc15046a	Fix submodule issue	2020-10-09 13:29:35 -04:00
Scott Shawcroft	506936ea2e	Merge pull request #3525 from UnexpectedCircuitPython/UM_S2_Boards Fixed the FeatherS2 prerelease hardware name	2020-10-09 10:20:13 -07:00
askpatricw	2b2003f3e7	Set default hostname	2020-10-08 22:46:10 -07:00
Scott Shawcroft	b578afa02f	Merge pull request #3523 from tannewt/ble_connectionerror Replace _bleio.ConnectionError with the native version	2020-10-08 13:00:06 -07:00
Ryan T. Hamilton	99f27bea61	Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet	2020-10-08 12:43:52 -07:00
Lucian Copeland	5af1e054a7	Fix strange merge submodule edit	2020-10-08 14:57:41 -04:00
Lucian Copeland	b5f8321d37	Merge branch 'esp32-analogin' into esp32-analogout	2020-10-08 12:42:00 -04:00
Lucian Copeland	97d217a764	Merge remote-tracking branch 'upstream/main' into esp32-analogin	2020-10-08 12:34:58 -04:00
hierophect	4bec77652b	Merge pull request #3519 from hathach/fix-idf-latest fix espressif latest idf	2020-10-08 12:22:24 -04:00
hathach	e1fc85c56b	fix usb issue with latest idf	2020-10-08 13:30:32 +07:00
Seon Rozenblum	d93a1961c4	Fixed the FeatherS2 prerelease hardware name	2020-10-08 14:03:16 +11:00
Scott Shawcroft	9fcf96cb64	Replace _bleio.ConnectionError with the native version Replace uses of _bleio.ConnectionError with regular ConnectionError Fixes #3008	2020-10-07 17:11:32 -07:00
Scott Shawcroft	ef42d6bb6c	Update USB PID	2020-10-07 16:12:07 -07:00
Scott Shawcroft	09bc415751	Unify iMX flash config and add Metro M7 1011 This unifies the flash config to the settings used by the Boot ROM. This makes the config unique per board which allows for changing quad enable and status bit differences per flash device. It also allows for timing differences due to the board layout. This change also tweaks linker layout to leave more ram space for the CircuitPython heap.	2020-10-07 15:23:47 -07:00
gamblor21	085d2a2274	Update submodule to merge commit	2020-10-07 14:09:26 -05:00
hathach	b7ed18d622	change idf to espressif fix hal includes	2020-10-08 00:52:00 +07:00
Lucian Copeland	9ac0aae5a9	Merge remote-tracking branch 'upstream/main' into esp32-analogout	2020-10-07 12:21:04 -04:00
Lucian Copeland	7386a948bd	Merge remote-tracking branch 'upstream/main' into esp32-analogin	2020-10-07 12:20:30 -04:00
Jeff Epler	16ed875f4e	canio: remove unused fields these relate to properties that were removed as well	2020-10-06 20:14:50 -05:00
Jeff Epler	81d7ef0256	stm: canio: remove stray optimization flag for debugging	2020-10-06 20:13:23 -05:00
Jeff Epler	eed3387f4e	stm32: canio: Fix message cancellation .. it's necessary to wait for a cancellation request to actually free the respective Tx mailbox	2020-10-06 20:12:10 -05:00
Jeff Epler	abe0405d6e	stm32: canio: Fix canio.CAN.restart()	2020-10-06 20:12:06 -05:00
Jeff Epler	e5a0af9216	stm32: canio: When Tx mailboxes are full, cancel an old message .. also add the 8ms wait for transmission that the atmel sam port has	2020-10-06 20:11:58 -05:00
Jeff Epler	a7dccb39a4	stm32: canio: remove unused functions	2020-10-06 20:11:51 -05:00
Jeff Epler	23bd2496de	stm32: canio: remove some unneeded declarations	2020-10-06 20:11:43 -05:00
Jeff Epler	7df01d3fbd	stm32: canio: enable on all stm32f405 boards	2020-10-06 20:11:39 -05:00
Jeff Epler	01e9e355ce	canio: implement for stm32f405 The has successfully run my loopback self-test program for CAN, which tests transmission, reception, and filtering. The 1M baud rate setting was also verified on saleae to be accurate.	2020-10-06 20:11:35 -05:00
Scott Shawcroft	8c428a3bdd	Merge pull request #3492 from hierophect/esp32-update-idf ESP32S2: move to official IDF submodule	2020-10-06 16:53:32 -07:00
Lucian Copeland	d5c8e55769	Add AnalogIO	2020-10-06 15:13:50 -04:00
Lucian Copeland	68cb384f8f	Remove logging from shared-bindings, fix translations, revert config target macro	2020-10-06 13:29:12 -04:00
Lucian Copeland	f90eb23db1	Merge branch 'esp32-update-idf' into esp32-analogin	2020-10-06 12:52:40 -04:00
Lucian Copeland	0d7552b67e	Update ESP-IDF to newer fixed fork	2020-10-06 12:48:28 -04:00
Seon Rozenblum	5c00ba8592	Removed hardware APA settings from mpconfigboard.h because they make the APA flicker on boot. I need to look into why, but I don't think they are being used for anything right now anyway.	2020-10-06 07:40:20 +11:00
hierophect	e93a274f2f	Merge branch 'main' into esp32-analogin	2020-10-05 13:02:42 -04:00
Lucian Copeland	0467a82880	Fix/remove various style issues	2020-10-05 13:00:42 -04:00
Lucian Copeland	a8dfae58d9	Add ADC calibration module support	2020-10-01 17:17:39 -04:00
Scott Shawcroft	d62ac24493	Merge pull request #3469 from jepler/noreturn Add some NORETURN attributes	2020-10-01 11:18:36 -07:00
Scott Shawcroft	2ad54f8413	Merge pull request #3463 from UnexpectedCircuitPython/UM_S2_Boards Updated UM FeatherS2 boards	2020-10-01 10:56:55 -07:00
Lucian Copeland	9a3bd82f40	Update TinyUSB include compatibility	2020-10-01 13:19:54 -04:00
Lucian Copeland	0bbd067a17	Revert ADC calibration removal, complete merge	2020-10-01 13:06:48 -04:00
Lucian Copeland	c624c1e838	Merge branch 'esp32-update-idf' into esp32-analogin	2020-09-30 16:51:19 -04:00
Lucian Copeland	e01e8dd6b9	Revert HAL refactor changes to avoid USB breaking changes past esp-idf dde6222cd	2020-09-30 16:36:13 -04:00
Scott Shawcroft	a739d314f1	Add Metro ESP32S2 Also fix two bugs: * Crash when resetting board.SPI when it hasn't been inited. * Reading back the output value is always false. Fixes #3353	2020-09-30 12:57:39 -07:00
Scott Shawcroft	7f803c0b51	Merge pull request #3489 from astrobokonon/esp32s2-fixconnection ESP32S2: Enter station mode before connecting	2020-09-30 12:16:15 -07:00
Scott Shawcroft	5ac3c36d64	Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107 New quirk for sh1107	2020-09-30 12:03:10 -07:00
Scott Shawcroft	a09a158ddc	Fix trailing line	2020-09-30 11:36:51 -07:00
Lucian Copeland	66b8559fd4	Change submodule, rework all includes	2020-09-30 11:26:07 -04:00
Jeff Epler	c129c8f296	Merge remote-tracking branch 'origin/main' into canbus-api-changes	2020-09-29 20:15:11 -05:00
Seon Rozenblum	819b5faa71	Removed ProS2 board files for now	2020-09-30 10:23:54 +10:00
Seon Rozenblum	4b1a7d812e	Updated UM boards	2020-09-30 10:16:24 +10:00
Seon Rozenblum	a2a0aa058f	Updated UM boards	2020-09-30 10:13:05 +10:00
Ryan T. Hamilton	2f6d7c9002	Make sure you're a STA before connecting	2020-09-29 13:41:56 -07:00
Jeff Epler	2bb44f6c4d	Merge pull request #3486 from microDev1/fixTranslate Update make translate script	2020-09-29 14:32:49 -05:00
Jeff Epler	611f81ac1a	canio: actually drop the _error_count properties thanks @tannewt	2020-09-29 14:25:53 -05:00
microDev	4c7d9e3aaf	Update make translate script	2020-09-29 11:14:30 +05:30
Jeff Epler	d4ee440a91	Merge pull request #3475 from tannewt/esp_uf2 Reorganize sdkconfigs and release UF2s	2020-09-28 20:39:37 -05:00
Ryan T. Hamilton	2a4a244245	Add ap_ssid and ap_bssid	2020-09-28 17:25:09 -07:00
Jeff Epler	dd6e7f5a8a	mimxrt10xx: Add required header for NORETURN definition	2020-09-28 18:56:01 -05:00
Jeff Epler	1dbb59271c	esp32: Use esp_restart from reset_to_bootloader; redeclare it NORETURN	2020-09-28 18:56:01 -05:00
Jeff Epler	726dcdb60a	Add some NORETURN attributes I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom: ``` int find_unused_slot(void) { // precondition: you already verified that a slot was available for (int i=0; i<NUM_SLOTS; i++) { if( slot_free(i)) { return i; } } safe_mode_reset(MICROPY_FATAL_ERROR); } ``` However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN. So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN. Additional notes: * stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway. * ditto cxd56 * esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested) * litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added. * cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added. * In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared. * the stub safe_mode reset simply aborts. This is used in mpy-cross.	2020-09-28 18:55:56 -05:00
Ryan T. Hamilton	7b7ef8edde	Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet	2020-09-28 16:50:02 -07:00
Ryan T. Hamilton	66d55738c1	Enable DNS info	2020-09-28 16:49:20 -07:00
mdroberts1243	b1e1237887	Merge branch 'main' into New_quirk_for_SH1107	2020-09-28 19:40:47 -04:00
Jeff Epler	f4e36fc7f6	CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field	2020-09-28 17:22:00 -05:00
Jeff Epler	3e97e9c4be	canio: Listener: shuffle function declarations around	2020-09-28 17:22:00 -05:00
Jeff Epler	48bda589b8	Listerner: read -> receive, drop readinto This prepares for creating a separate RemoteTransmissionRequest class	2020-09-28 17:22:00 -05:00
Jeff Epler	79ca430ddf	Match: address -> id	2020-09-28 17:22:00 -05:00
Scott Shawcroft	abdbbf9e24	One grep	2020-09-28 15:10:12 -07:00
Lucian Copeland	128b4a013b	Add non-calibrated ADC	2020-09-28 12:11:08 -04:00
Anson He	96323ac3ac	Default power on Wio Terminal's 40 Pin	2020-09-27 10:21:25 +08:00
Ryan T. Hamilton	b9968ea801	Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet	2020-09-26 13:37:14 -07:00
Jeff Epler	791d20f16c	give qtpy haxpress its own USB PID	2020-09-26 11:45:53 -05:00
Jeff Epler	9944935fde	qtpy haxpress: enable RTC	2020-09-26 11:33:10 -05:00
Mark Roberts	22a7696fac	Changes take 2: missed ugame10 board	2020-09-25 22:17:59 -04:00
Mark Roberts	b921543571	Requested changes take 1	2020-09-25 21:27:29 -04:00
Jeff Epler	eadb4de144	qtpy_m0_haxpress: add	2020-09-24 16:58:24 -05:00
Scott Shawcroft	dd86cb00ad	Merge pull request #3448 from hierophect/esp32-sd-fix ESP32S2 - Fix SPI's SD card issue, add pin protections	2020-09-23 12:30:01 -07:00
Scott Shawcroft	bcabf5e019	Merge pull request #3457 from ladyada/qtpy_m0 fix pins for rev C	2020-09-23 11:31:28 -07:00
Lucian Copeland	00517b2600	Move missing pin warning to shared-bindings	2020-09-23 11:39:39 -04:00
lady ada	9db7625717	neopix is default on!	2020-09-23 11:19:01 -04:00
lady ada	5384479a61	fix pins for rev C	2020-09-22 23:28:23 -04:00
Scott Shawcroft	98185e914b	Merge pull request #3425 from jepler/canbus canio: Initial implementation for SAM E5x MCUs	2020-09-22 12:39:52 -07:00
Jeff Epler	59580d0f2d	canio: Fix implementation bugs in atmel-sam	2020-09-22 09:36:29 -05:00
microDev	add230b4da	Update port.c	2020-09-22 11:37:12 +05:30
Ryan T. Hamilton	a77966a736	Try to reuse/share existing objects	2020-09-21 21:36:46 -07:00
Ryan T. Hamilton	2fa269ccbc	Additional error handling	2020-09-21 20:56:03 -07:00
Jeff Epler	4869dbdc67	canio: rename from _canio This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.	2020-09-21 16:44:26 -05:00
Jeff Epler	9e8f1820c8	canio.CAN: switch rx/tx, make both mandatory, move declarations around	2020-09-21 16:44:26 -05:00
Jeff Epler	4e4853dcb2	common.template.ld: remove unneeded line	2020-09-21 16:44:26 -05:00
Jeff Epler	df379b84cb	remove unneeded symbols	2020-09-21 16:44:26 -05:00
Jeff Epler	7fd6cab2ac	canio: Make both tx and rx (but not both) optional .. loopback and silent come from the (optional) constructor parameters not guessing based on the pin specification .. docstring & comment improvements	2020-09-21 16:44:26 -05:00
Jeff Epler	09f8a83a75	samd: template.ld: put canram in its own output section	2020-09-21 16:44:26 -05:00
Jeff Epler	a76119afcb	add _canio to Feather M4 CAN	2020-09-21 16:44:26 -05:00
Jeff Epler	67d8f108bb	Add CAN to SAM E51 clock config	2020-09-21 16:44:26 -05:00
Jeff Epler	44c5b2bbb1	Respond to review comments Thanks @tannewt!	2020-09-21 16:44:26 -05:00
Jeff Epler	58b920ed97	fix whitespace	2020-09-21 16:44:26 -05:00
Jeff Epler	27cbb690e5	_canio: Add listener matching Lightly tested: * no matches (catch-all) * standard address single address matches (even and odd positions) * standard address mask matches * only tested that extended doesn't match non-extended	2020-09-21 16:44:26 -05:00
Jeff Epler	635fcadb59	_canio.CAN: add error handling & bus state	2020-09-21 16:44:26 -05:00
Jeff Epler	a2e1867f69	_canio: Minimal implementation for SAM E5x MCUs Tested & working: * Send standard packets * Receive standard packets (1 FIFO, no filter) Interoperation between SAM E54 Xplained running this tree and MicroPython running on STM32F405 Feather with an external transceiver was also tested. Many other aspects of a full implementation are not yet present, such as error detection and recovery.	2020-09-21 16:44:26 -05:00
Jeff Epler	183649aad8	samd: move mcu_find_pin_function to header .. it'll be used in can as well as sdio	2020-09-21 16:44:07 -05:00
Lucian Copeland	22d9a94f2b	Use write_value, add missing pin exceptions	2020-09-21 13:47:14 -04:00
Scott Shawcroft	c963771b4b	Merge pull request #3445 from microDev1/boardInfo Update microS2 config files	2020-09-21 10:33:38 -07:00
microDev	40ec7a66e4	Update microS2 config files	2020-09-21 14:39:31 +05:30
Jeff Epler	ce266425e1	Merge pull request #3441 from hierophect/stm32-rgbmatrix-crashfix STM32: Add never_reset reservation to RGBMatrix init	2020-09-20 07:51:09 -05:00
Ryan T. Hamilton	bc8863a3c7	Simplify now that I have it working still need to figure out the bound method business	2020-09-19 21:04:07 -07:00
Ryan T. Hamilton	04ffd0dca0	Add gateway, subnet, and rssi info for current connected AP ap_rssi is a bound method, which I'm not keen on, but it works	2020-09-19 13:38:04 -07:00
Dan Halbert	9cc803eb95	Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21 Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.	2020-09-19 13:41:21 -04:00
Dan Halbert	b28b31196d	Merge pull request #3438 from nitz/patch-1 [Makerdiary nRF52840 M.2 Devkit] Add SDA & SDL, RX & TX to pins.c	2020-09-18 21:51:22 -04:00
Dan Halbert	dfd09bba57	Merge pull request #3433 from astrobokonon/esp32s2-bssid ESP32S2: Allow connecting to specific bssid	2020-09-18 21:31:15 -04:00
Dan Halbert	8cf0171c06	Merge pull request #3431 from hierophect/stm32-spi-writevalue STM32: Change SPI Read to acknowledge write_value	2020-09-18 19:46:21 -04:00
Dan Halbert	5116375604	Merge pull request #3436 from jepler/fix-spi-sercom4 samd: SPI: improve conditional code	2020-09-18 19:14:39 -04:00
Dan Halbert	23dd7c7c96	Merge pull request #3435 from jepler/fix-sdhc1 sdioio: fix code for the case where there is no SDHC1	2020-09-18 17:10:59 -04:00
nitz	8d6a28a9ff	Update user button names.	2020-09-18 17:01:44 -04:00
Dan Halbert	550b42e4d3	Merge pull request #3434 from jepler/same54-disable-cpu-voltage sam e54: disable microcontroller.cpu.voltage	2020-09-18 15:20:43 -04:00
nitz	5249a228a0	More pin names cleanup.	2020-09-18 14:27:00 -04:00
Lucian Copeland	3a59d30e1a	Remove timer debug messages	2020-09-18 12:48:15 -04:00
Lucian Copeland	c58bd4c047	Add never_reset reservation to RGBMatrix init	2020-09-18 12:38:15 -04:00
nitz	db078922e4	Removed TXD/RXD, fixed whitespace.	2020-09-17 21:32:19 -04:00
Chris Dailey	be3e478fce	Add SDA & SDL, RX & TX to pins.c Despite the [silk on the dock board](https://wiki.makerdiary.com/nrf52840-m2-devkit/resources/nrf52840_m2_devkit_hw_diagram_v1_0.pdf), the SDA/SCL pins weren't defined. Though, they were already defined in `mpconfigboard.h`. Same for RX/TX. It looks like it declared `TXD` and `RXD`, so I didn't want to remove those, but I think it makes sense to have the "standard" pin names, but I moved ithem to illustrate they were all referencing the same pins. I mimicked the whitespace I saw in the metro_nrf52840_express port.	2020-09-17 20:46:59 -04:00
Jeff Epler	45eec5b5a5	samd: SPI: improve conditional code I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in asf4. However, the problem was in our SPI code. A special case for samr21 MCUs was being applied to same54p20a and possibly other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all. Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only defined if special function F of pin PC19 is SERCOM4 PAD0. Reorganize the code a little bit so that brace-matching in editors is not confused by the conditionalized code, including an unrelated change for APA102_SCK's condition. Revert the change to the Makefile that incorrectly attempted to silence the diagnostic.	2020-09-17 18:30:22 -05:00
Jeff Epler	c73182803d	sdioio: fix code for the case where there is no SDHC1 .. it doesn't really make a difference (the old code created an empty else{} statement) but this is more correct.	2020-09-17 18:29:31 -05:00
Jeff Epler	1b29ceaf1a	sam e54: disable microcontroller.cpu.voltage This hangs, and the usual workarounds didn't work.	2020-09-17 18:27:43 -05:00
Scott Shawcroft	17bdc969db	Reorganize sdkconfigs and release UF2s	2020-09-17 16:01:23 -07:00
Ryan T. Hamilton	1805e92038	Add else case for non-bssid usage	2020-09-17 15:04:27 -07:00
Scott Shawcroft	7f60ebd6c7	Merge pull request #3426 from tannewt/esp_flash_sizes Add partition layouts for 8 and 16 MB as well.	2020-09-17 13:27:58 -07:00
Scott Shawcroft	4b827b25ad	Merge pull request #2966 from sommersoft/ci_check_vid_pid Automate USB VID/PID Uniqueness Check	2020-09-17 11:48:46 -07:00
Scott Shawcroft	9cf9441ba6	Merge pull request #3393 from tannewt/fix_spi_psram Add non-DMA SPI support.	2020-09-17 11:11:56 -07:00
Scott Shawcroft	78338ac12b	Merge pull request #3417 from hierophect/esp32s2-readme ESP32S2: Add Readme	2020-09-17 10:58:17 -07:00
Ryan T. Hamilton	1e3241ec6d	Merge branch 'main' into esp32s2-bssid	2020-09-16 17:15:01 -07:00
Ryan T. Hamilton	daa1dd278d	connect now accepts bssid	2020-09-16 16:25:17 -07:00
Brian Dean	81ee874531	pins.c: fix trailing whitespace	2020-09-16 16:40:04 -04:00
Brian Dean	847d609ddc	rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately	2020-09-16 16:27:24 -04:00
Scott Shawcroft	c55deb54f0	Merge pull request #3427 from usini/muselab_nanoesp32_s2 Added board - Muselab nanoESP32-S2	2020-09-16 12:23:41 -07:00
Lucian Copeland	00ee94d24b	Add SPI memset, optional flags	2020-09-16 14:22:18 -04:00
Scott Shawcroft	fb90daa0ff	Merge pull request #3422 from askpatrickw/rtc-support RTC enabled	2020-09-16 11:12:00 -07:00
askpatricw	18285f96e8	RTC is pickd up automatically	2020-09-16 10:13:07 -07:00
Dan Halbert	d774678a0f	Merge pull request #3369 from kamtom480/camera Add camera module	2020-09-16 12:29:58 -04:00
Lucian Copeland	478a4b6405	Clarify location of port root	2020-09-16 10:51:08 -04:00
Jeff Epler	1fc797132a	Merge pull request #3237 from DavePutz/issue3216 Issue#3216 - Needed an alternate way to check if background tasks were run	2020-09-16 08:47:33 -05:00
Kamil Tomaszewski	61687c81d8	camera: Pass width and height to take_picture()	2020-09-16 13:55:57 +02:00
Rémi Sarrailh	c06aeda399	Add Muselab nanoesp32 s2 definition	2020-09-16 13:10:01 +02:00
Ryan T. Hamilton	fead60d2d8	Add BSSID to Network	2020-09-15 23:32:53 -07:00
Scott Shawcroft	2bd169ec32	Add partition layouts for 8 and 16 MB as well.	2020-09-15 18:12:06 -07:00
Scott Shawcroft	95e27bb8bf	Add more PIDs for unique boards	2020-09-15 13:43:35 -07:00
askpatricw	bd381e434f	Revert "code review feedback" This reverts commit `f9f614b3a2`.	2020-09-15 13:02:26 -07:00
askpatricw	f9f614b3a2	code review feedback	2020-09-15 11:28:31 -07:00
askpatricw	8fcdc7da16	RTC enabled	2020-09-14 23:24:44 -07:00
Dan Halbert	3c6af94fb3	Merge pull request #3384 from jepler/feather_m4_can atmel-samd: add same51, feather_m4_can	2020-09-14 23:57:51 -04:00
Jeff Epler	067a975875	update submodules to merge commits	2020-09-14 17:22:30 -05:00
DavePutz	2a2a8d6457	Merge pull request #28 from adafruit/main Merge from adafruit/main	2020-09-14 16:50:40 -05:00
Lucian Copeland	3640ef2b7f	Fix toctree, incorrect flash port assumptions	2020-09-14 17:37:55 -04:00
Lucian Copeland	6ecfdda580	Add Readme	2020-09-14 13:18:51 -04:00
DavePutz	2eca4ee902	Update PulseIn.c	2020-09-14 11:04:45 -05:00
Lucian Copeland	e504438fd2	Remove unlicensed file, fix reset pin type check	2020-09-14 11:58:13 -04:00
DavePutz	c014ac3089	Reworked check for input taking too long	2020-09-14 10:54:57 -05:00
Lucian Copeland	ecc219fe50	Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix	2020-09-14 10:44:31 -04:00
Kamil Tomaszewski	ce7ee58e92	camera: Update camera module	2020-09-14 13:12:20 +02:00
Kamil Tomaszewski	c2fc592c2c	camera: Change API	2020-09-14 13:11:15 +02:00
Kamil Tomaszewski	143a1ff94a	spresense: change the GC to do 32-byte blocks	2020-09-14 13:11:15 +02:00
Kamil Tomaszewski	1fde8ef9bc	spresense: Add support for camera	2020-09-14 13:11:15 +02:00
Jeff Epler	b3bdd4686b	PacketBuffer: add missing 'break's, remove unneeded {}	2020-09-13 15:10:38 -05:00
Jeff Epler	af24c8ae06	Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic Conflict in locale/circuitpython.pot resolved with 'make translate'	2020-09-13 14:21:21 -05:00
Jeff Epler	73ad78ed1b	Merge pull request #3395 from microDev1/safeMode Add esp32s2 safe mode support & fix user_safe_mode output	2020-09-13 14:18:59 -05:00
Jeff Epler	90f7340bfc	move implicit-fallthrough warning enable to defns.mk	2020-09-13 13:13:09 -05:00
microDev	36da92075b	Update safe mode reason	2020-09-13 22:57:24 +05:30
microDev	5deac8d249	Update board specific safe mode message	2020-09-13 18:22:40 +05:30
lady ada	2fac4851a5	fix typo, tested hardware, neopixel doesnt work tho	2020-09-12 19:56:13 -04:00
lady ada	6fff4ec00d	cutie variant	2020-09-12 19:00:26 -04:00
Jeff Epler	01fdd9598a	disable iimplicit-fallthrough warning inside asf4 .. there is an instance of it that looks like a "true positive", but it only affects sdhc transfers that are not a multiple of 4 bytes, which I don't think happens. (sd card blocks are always 512 bytes) I can fix this in our asf4 repo but that would mean this should be deferred until after #3384 is merged, since that also touches asf4 very invasively by adding a whole new chip family.	2020-09-12 17:48:42 -05:00
Jeff Epler	5729097bc4	atmel-samd: enable build error for implicit fallthrough If any diagnostics occur, we will want to either add `/* FALLTHROUGH */` or `break;` as appropriate. I only tested a few builds (trinket m0 and metro m4 express)	2020-09-12 15:11:29 -05:00
microDev	4da478382d	Fix serial console output & add more boards	2020-09-12 17:46:52 +05:30
microDev	305bed6d9e	Added esp32s2 safe_mode & fixed user_safe_mode	2020-09-11 21:06:54 +05:30
Jeff Epler	cacb0124ac	feather_m4_express: Use quad data mode on flash Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed. Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.	2020-09-10 20:20:21 -05:00
Scott Shawcroft	c7c90f47b0	Add non-DMA SPI support. This fixes SPI with PSRAM allocated buffers. DMA with SPI2 was attempted but produced junk output. This manual copy is less than 2x slower than DMA when not interrupted. Fixes #3339	2020-09-10 17:32:20 -07:00
Scott Shawcroft	9e722c8c99	Merge pull request #3375 from DavePutz/issue3296 Correction for Issue #3296 - ble hanging on nrf52840	2020-09-10 12:36:17 -07:00
Scott Shawcroft	e5dd2a32f4	Merge pull request #3388 from jerryneedell/jerryn_rfm69 freeze rfm69 and bus_device libraries into feather_m0_rfm69	2020-09-10 11:49:37 -07:00
Scott Shawcroft	683462c1b1	Merge pull request #3326 from tannewt/native_wifi Add native wifi API with ESP32S2 support	2020-09-10 11:20:44 -07:00
Jerry Needell	2529ee2359	freeze rfm69 and bus_device libraries int feather_m0_rfm69	2020-09-09 14:54:20 -04:00
Lucian Copeland	be199983c1	Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix	2020-09-09 13:24:30 -04:00
Scott Shawcroft	99f5011d74	Fix heap without PSRAM. Never set heap_size.	2020-09-08 17:06:09 -07:00
Jeff Epler	b49099c8f3	additional asf4 updates	2020-09-08 15:31:13 -05:00
Jeff Epler	e066448e36	atmel-samd: add same51, feather_m4_can This is compile-tested, and requires updates in the related submodules: https://github.com/adafruit/samd-peripherals/pull/35 https://github.com/adafruit/asf4/pull/37 This should not be merged until those can also be merged.	2020-09-08 13:06:45 -05:00
microDev	14af8e4b42	Added temp_sensor_stop Co-authored-by: hierophect <hierophect@gmail.com>	2020-09-08 21:07:00 +05:30
microDev	c68723db3c	Update Processor.c	2020-09-08 15:13:48 +05:30
root	2690faec43	Moved checks for invalid pin to common-hal/microcontroller/Pin.c	2020-09-05 11:42:06 -05:00
root	ed6cc64c49	Corrected issue with BLE not working on nrf52840	2020-09-04 16:59:41 -05:00
Dan Halbert	42df254683	Merge pull request #3373 from dhalbert/trellis-m4-board-i2c fix pins for trellis_m4 board.I2C()	2020-09-04 11:15:18 -04:00
Scott Shawcroft	96cf60fbbd	Merge remote-tracking branch 'adafruit/main' into native_wifi	2020-09-03 16:34:56 -07:00
Scott Shawcroft	0b94638aeb	Changes based on Dan's feedback	2020-09-03 16:32:12 -07:00
Dan Halbert	960888a3bd	fix pins for trellis_m4 board.I2C()	2020-09-03 14:22:18 -04:00
Scott Shawcroft	786f4ed114	Merge pull request #3344 from jepler/issue-3184 Fix RGBMatrix, FrameBufferDisplay bugs	2020-09-02 15:32:30 -07:00
Lucian Copeland	4733a67226	Add GDB debugging capability	2020-09-02 11:27:42 -04:00
Scott Shawcroft	f0e60da51f	Merge pull request #3310 from dhalbert/ble_hci _bleio HCI implementation	2020-09-01 11:28:05 -07:00
Jeff Epler	952d9bbb4a	samd: Ignore a maybe-uninitialized diagnostic in asf4 I encountered this when changing optimization flags for debugging purposes. The diagnostic appears spurious and unrelated to what I'm debugging.	2020-09-01 10:55:45 -05:00
Jeff Epler	ad4bf75367	samd: only set NDEBUG for non-debug builds	2020-09-01 10:55:45 -05:00
Dan Halbert	4ac7650f22	matrix portal board	2020-08-31 23:56:38 -04:00
Dan Halbert	6dbd369272	merge from upstream	2020-08-30 14:39:03 -04:00
Limor "Ladyada" Fried	0adccc50dc	Merge pull request #3346 from tannewt/add_kaluga Add Kaluga board definition	2020-08-29 21:05:20 -04:00
Scott Shawcroft	7b59ede25e	Add remaining pins	2020-08-28 18:22:22 -07:00
Scott Shawcroft	0bb5c6c07f	Add unique USB PID	2020-08-28 16:37:25 -07:00
lady ada	81870413af	add default I2C	2020-08-28 19:08:36 -04:00
Scott Shawcroft	a09243472c	Add Kaluga board definition	2020-08-28 16:08:24 -07:00
Dan Halbert	893a125dd0	Merge pull request #3338 from jepler/endpoint-count-checking-stm32f405 add endpoint count checking on stm32f405	2020-08-28 11:12:31 -04:00
Dan Halbert	ac06202c21	Merge pull request #3238 from ElectronicCats/bastwifi Add Bastwifi by Electronic Cats	2020-08-28 11:03:52 -04:00
Scott Shawcroft	5d8ac0428b	-Os espruino_pico to save space	2020-08-27 13:34:37 -07:00
Jeff Epler	563e038c0d	stm: Specify max endpoints for stm32f405xx .. which is why we can't have HID or MIDI on the stm32f405 feather	2020-08-27 15:11:17 -05:00
Scott Shawcroft	2b71635c49	Fix esp-idf requirements	2020-08-27 11:45:51 -07:00
Scott Shawcroft	fd6e63d806	Hopefully final partition scheme.	2020-08-27 11:43:06 -07:00
Scott Shawcroft	767ca5c3dc	Merge remote-tracking branch 'adafruit/main' into native_wifi	2020-08-27 11:42:31 -07:00
Jeff Epler	49a22b0c55	Merge pull request #3320 from hierophect/stm32-meowbit-fix STM32: Fix Meowbit startup and associated bugs	2020-08-27 13:05:56 -05:00
Dan Halbert	24fb08dbd9	Merge pull request #3337 from hierophect/pulseout-errorstyle Fix problematic whitespace on pulseout parameter errors	2020-08-27 13:22:26 -04:00
Dan Halbert	350e88d4b9	Merge pull request #3324 from hierophect/esp32-random Add random to ESP32-S2, fix it on STM32	2020-08-27 13:22:05 -04:00
Dan Halbert	6100027243	Merge pull request #3315 from tannewt/add_psram Add PSRAM support to ESP32S2	2020-08-27 11:58:59 -04:00
Lucian Copeland	8021da08d3	Fix problematic whitespace on pulseout parameter errors	2020-08-27 11:07:47 -04:00
hierophect	772052598d	Merge branch 'main' into stm32-meowbit-fix	2020-08-27 11:00:29 -04:00
hierophect	a15f948a40	Merge branch 'main' into esp32-random	2020-08-27 10:49:14 -04:00
Dan Halbert	fe73cfb922	Merge pull request #3333 from hierophect/esp32-enable-ulab Fix all assignments affected by inline makefile comments	2020-08-27 10:36:59 -04:00
Lucian Copeland	8d2299e61e	Merge remote-tracking branch 'upstream/main' into stm32-meowbit-fix	2020-08-26 18:50:26 -04:00
Lucian Copeland	c229345741	improve efficiency of stm32 random gen	2020-08-26 18:47:19 -04:00
Lucian Copeland	553ac576eb	Disable ulab	2020-08-26 17:48:29 -04:00
Lucian Copeland	c77523503b	Fix trailing whitespace errors across ports and docs	2020-08-26 14:48:46 -04:00
Jeff Epler	44342732a4	Fix DOS line endings, they give my git fits	2020-08-26 10:56:00 -05:00
Dan Halbert	5755160720	Merge pull request #3322 from microDev1/microS2 Added board - microS2	2020-08-26 11:03:46 -04:00
microDev	f26d15c5c9	Added PSRAM support	2020-08-26 18:39:30 +05:30

... 12 13 14 15 16 ...

4946 Commits