countio implementation for esp32s2

ports/esp32s2/common-hal/countio/Counter.c

@@ -0,0 +1,69 @@
+#include "common-hal/countio/Counter.h"
+
+#include "py/runtime.h"
+#include "supervisor/shared/translate.h"
+
+#include "driver/pcnt.h"
+
+static void pcnt_init(countio_counter_obj_t* self) {
+    int unit = PCNT_UNIT_0;
+    // Prepare configuration for the PCNT unit
+    pcnt_config_t pcnt_config = {
+        // Set PCNT input signal and control GPIOs
+        .pulse_gpio_num = self->pin->number,
+        .ctrl_gpio_num = PCNT_PIN_NOT_USED,
+        .channel = PCNT_CHANNEL_0,
+        .unit = unit,
+        // What to do on the positive / negative edge of pulse input?
+        .pos_mode = PCNT_COUNT_INC,   // Count up on the positive edge
+        .neg_mode = PCNT_COUNT_DIS,   // Keep the counter value on the negative edge
+    };
+    // Initialize PCNT unit
+    pcnt_unit_config(&pcnt_config);
+
+    // Configure and enable the input filter
+    pcnt_set_filter_value(unit, 100);
+    pcnt_filter_enable(unit);
+
+    // Initialize PCNT's counter
+    pcnt_counter_pause(unit);
+    pcnt_counter_clear(unit);
+
+    // Everything is set up, now go to counting
+    pcnt_counter_resume(unit);
+}
+
+void common_hal_countio_counter_construct(countio_counter_obj_t* self,
+    const mcu_pin_obj_t* pin) {
+    claim_pin(pin);
+    self->pin = pin;
+    pcnt_init(self);
+}
+
+bool common_hal_countio_counter_deinited(countio_counter_obj_t* self) {
+    return self->pin == NULL;
+}
+
+void common_hal_countio_counter_deinit(countio_counter_obj_t* self) {
+    if (common_hal_countio_counter_deinited(self)) {
+        return;
+    }
+    reset_pin_number(self->pin->number);
+    self->pin = NULL;
+}
+
+mp_int_t common_hal_countio_counter_get_count(countio_counter_obj_t* self) {
+    int16_t count;
+    pcnt_get_counter_value(PCNT_UNIT_0, &count);
+    return count+self->count;
+}
+
+void common_hal_countio_counter_set_count(countio_counter_obj_t* self,
+        mp_int_t new_count) {
+    self->count = new_count;
+    pcnt_counter_clear(PCNT_UNIT_0);
+}
+
+void common_hal_countio_counter_reset(countio_counter_obj_t* self) {
+   common_hal_countio_counter_set_count(self, 0);
+}

ports/esp32s2/common-hal/countio/Counter.h

@@ -0,0 +1,15 @@
+
+#ifndef MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H
+#define MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNTER_H
+
+#include "common-hal/microcontroller/Pin.h"
+
+#include "py/obj.h"
+
+typedef struct {
+    mp_obj_base_t base;
+    const mcu_pin_obj_t * pin;
+    mp_int_t count;
+} countio_counter_obj_t;
+
+#endif // MICROPY_INCLUDED_ESP32S2_COMMON_HAL_COUNTIO_COUNT_H

ports/esp32s2/common-hal/countio/__init__.c

@@ -0,0 +1 @@
+//No countio module functions

ports/esp32s2/mpconfigport.mk

@@ -17,7 +17,7 @@ CIRCUITPY_FULL_BUILD = 1
 CIRCUITPY_AUDIOBUSIO = 0
 CIRCUITPY_AUDIOIO = 0
 CIRCUITPY_CANIO = 1
-CIRCUITPY_COUNTIO = 0
+CIRCUITPY_COUNTIO = 1
 CIRCUITPY_FREQUENCYIO = 0
 CIRCUITPY_I2CPERIPHERAL = 0
 CIRCUITPY_ROTARYIO = 0