Jeff Epler
2e4a6b94e7
atmel-samd: get most constrained m0 builds to work again
...
By tweaking the optimizer flags, we can get back a few hundred bytes
and allow these builds to work with the gcc9 compiler.
2019-11-26 08:50:45 -06:00
Thomas Sarlandie
11dc572bce
feature: our own PID - thanks @ladyada
2019-11-25 21:56:42 +01:00
Thomas Sarlandie
fc71ed9789
add shirtty board - hackaday supercon 2019 addon
2019-11-25 17:44:41 +01:00
Dan Halbert
13375d16f1
change mpconfigport.mk files so they can be overriden by mpconfigboard.mk
2019-11-22 15:44:51 -05:00
Dan Halbert
e18d3e0f76
Merge branch 'master' into m4-network-ps2io
2019-11-22 15:02:52 -05:00
Dan Halbert
1a62a9cb17
remove network from kicksat_sprite
2019-11-22 14:02:44 -05:00
Dan Halbert
2e9aa38700
turn off network in pewpew_m4
2019-11-22 13:49:33 -05:00
Dan Halbert
1d411d2874
Merge remote-tracking branch 'adafruit/master' into testing-fixes
2019-11-22 11:55:34 -05:00
Dan Halbert
228a619af5
enable network, wiznet5k, and ps2io by default on M4
2019-11-22 10:59:27 -05:00
wallarug
fce7b89087
removed Robo HAT MM1 M0 board.
2019-11-20 21:34:24 +11:00
ndgarage
b3d7467719
add-ndbit6
2019-11-19 14:52:09 -07:00
Cedar Grove Maker Studios
e7df288a34
add USB interface description
...
... to "StringCarM0Ex"
2019-11-16 16:40:40 -08:00
KalbeAbbas
8134ceec83
Update pins.c
2019-11-14 23:16:55 +05:00
KalbeAbbas
799770926b
Update pins.c
2019-11-14 18:51:01 +05:00
KalbeAbbas
949f87fd25
Update pins.c
2019-11-14 18:50:26 +05:00
KalbeAbbas
3db7f2798f
updated
2019-11-14 16:34:08 +05:00
☒ Bjarke Gotfredsen
d745c1023e
Support for XinaBox CC03 and CS11
...
CC03 is a ATSAMD21G18 Cortex-M0+ breakout in xChips format. CS11 is the same, but with a SD Card Interface.
https://xinabox.cc/products/cc03
https://xinabox.cc/products/cs11
2019-11-12 12:48:31 +02:00
Thea Flowers
c7195c4bc5
Allow boards to enable the micropython.native
decorator
...
Adds the `CIRCUITPY_ENABLE_MPY_NATIVE` for `mpconfigboard.mk` that enables
the `micropython.native` decorator.
2019-11-05 14:27:53 -08:00
Thea Flowers
73989dbcaf
Add board configuration for Winterbloom Sol
2019-11-04 23:11:42 -08:00
brentru
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
brentru
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
ladyada
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
ladyada
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
Dan Halbert
1505da784f
wip
2019-10-28 18:15:02 -04:00
ProductDev
4cd5571203
Adds builds for sparkfun_qwiic_micro with and without flash
2019-10-23 15:05:46 -06:00
Dan Halbert
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
Chris Osterwood
137a4f8a5d
Added new flash SKU for production hardware
2019-10-07 14:50:39 -04:00
Scott Shawcroft
cdc116291b
Merge pull request #2177 from wallarug/walla/robohatmm1-production
...
Robo HAT MM1 - Fixes after testing
2019-09-26 10:44:55 -07:00
arturo182
21f8c3e40a
serpente: Update PID and enable as many modules as we can fit
2019-09-26 17:22:18 +02:00
wallarug
3c99a23adb
fix spi
2019-09-26 21:47:36 +10:00
wallarug
533a5bc7a3
fixed SPI on M4
2019-09-26 21:43:52 +10:00
wallarug
5cd10b3ba0
updated robohatmm1_m0
2019-09-26 20:02:09 +10:00
wallarug
39265fccf3
included a version number
2019-09-26 19:22:51 +10:00
wallarug
db9495b04b
updated board name
2019-09-26 19:21:53 +10:00
wallarug
08b0f80879
updated board name
2019-09-26 19:21:24 +10:00
wallarug
b7e8a031d0
remove frozen busio library
2019-09-26 19:19:54 +10:00
wallarug
ff13b6f682
updated pins.c
2019-09-26 19:18:50 +10:00
wallarug
70860e1352
robohatmm1 removed uart and put in correct order
2019-09-22 19:47:44 +10:00
Melissa LeBlanc-Williams
9a74bf929b
Added TFT pins to HalloWing M4 for code compatibility
2019-09-19 14:50:10 -07:00
Melissa LeBlanc-Williams
341428b4da
Added SPEAKER pin to HalloWing M4 for code compatibility
2019-09-19 11:23:37 -07:00
Melissa LeBlanc-Williams
8dfb2237d9
Added TOUCH pins to HalloWing M4 for code compatibility
2019-09-19 10:40:13 -07:00
Scott Shawcroft
fc90c942f5
Add custom CPX build for display support
2019-09-17 10:40:07 -07:00
Scott Shawcroft
aa9b57fc81
Merge pull request #2154 from arturo182/master
...
Add support for Serpente boards
2019-09-16 09:20:17 -07:00
arturo182
e1679acaec
Set as small build regardless of language
2019-09-16 11:51:46 +02:00
Kattni Rembor
c94310411b
Update board def, enable touchio
2019-09-14 21:19:35 -04:00
arturo182
28bb901d1e
Add support for Serpente boards
2019-09-14 16:06:28 +02:00
Radomir Dopieralski
d50ed3b6e7
Add support for PewPew M4 board
2019-09-05 10:50:33 +02:00
Scott Shawcroft
9730d4aa1c
Merge remote-tracking branch 'adafruit/4.1.x' into hallowing_m4_5.x
2019-08-29 14:38:16 -07:00
Scott Shawcroft
0aa5507c4c
add additional pin aliases
2019-08-29 13:41:28 -07:00
Scott Shawcroft
84839de56f
Hallowing M4
2019-08-29 10:34:46 -07:00
Scott Shawcroft
0876d5c4ad
Disable bitbangio on Itsy M0
...
Also, switch CIRCUITPY_BITBANG_APA102 to makefile setting so it can alter included files
2019-08-27 15:21:47 -07:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
Scott Shawcroft
b992ca80e7
Rejigger builds to fit under 50 minute limit
2019-08-22 20:29:58 -07:00
Scott Shawcroft
72e7ffa324
More cleanup
2019-08-22 16:16:09 -07:00
Scott Shawcroft
fd8050b369
Turn off features to make room for ePaper
2019-08-22 15:19:45 -07:00
Scott Shawcroft
9993a99906
Add initial Monster M4SK build
2019-08-22 14:24:32 -07:00
Scott Shawcroft
3a98de1236
Add reset() to display busses to detect whether it works
2019-08-22 14:23:33 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
Dan Halbert
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
Dave Astels
d547d59cba
Merge remote-tracking branch 'adafruit/master' into displayio_fill_area
2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263
Make room
2019-08-21 14:46:10 -04:00
Dan Halbert
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
brentru
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
brentru
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
Chris Osterwood
d5658860aa
Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping.
2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e
Merge branch 'master' into capablerobot-usbhub
2019-08-08 14:14:23 -04:00
brentru
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
brentru
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
Scott Shawcroft
eee759455a
Merge pull request #2018 from keith-packard/snekboard
...
Add board support for keithp.com SnekBoard
2019-07-31 16:38:51 -07:00
Scott Shawcroft
366fdcce18
Merge pull request #2011 from tannewt/ssd1322
...
Add knobs for SSD1322 and two displayio fixes.
2019-07-30 14:15:37 -07:00
Scott Shawcroft
9dd56b1566
Merge branch 'master' into snekboard
2019-07-30 14:12:08 -07:00
wallarug
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld
2019-07-30 19:48:35 +10:00
wallarug
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file
2019-07-30 19:13:33 +10:00
Keith Packard
c6e4ddc88a
boards/snekboard: Delete SPI object reference
...
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:52 -07:00
Keith Packard
9a37c8a4b3
boards/snekboard: Add pin aliases for UART and I2C
...
Allow users to use TX/RX and SDA/SCL names.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:45:06 -07:00
Keith Packard
4387ecfdfb
Update snekboard PID to official value
...
Snekboard has been assigned the following PIDs:
PID 0x004D # bootloader
PID 0x804D # arduino
PID 0x804E # circuitpython
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
Keith Packard
326df70ac2
Fix snekboard names
...
Manufacturer -- keithp.com
Product -- snekboard
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:15:18 -07:00
Keith Packard
56f710f64f
Add board support for keithp.com SnekBoard
...
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.
Signed-off-by: Keith Packard <keithp@keithp.com>
2019-07-29 13:14:37 -07:00
wallarug
dc1eb73ee7
Merge branch 'master' into wallarug-robohat
2019-07-29 21:53:49 +10:00
wallarug
8974c7e843
Added BUTTON to pins.c
2019-07-29 16:37:53 +10:00
wallarug
9e0bea405d
Added BUTTON to pins.c
2019-07-29 16:37:21 +10:00
wallarug
4d30efdc2a
Updated pins.c for GROVE.
2019-07-29 16:29:48 +10:00
wallarug
8838e25cb2
Update pins.c
2019-07-29 16:28:35 +10:00
sommersoft
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards
...
Add check to travis to make sure new boards are built, fix #1886
2019-07-28 22:41:59 -05:00
wallarug
0f30070d58
updated naming schema to match other boards
2019-07-27 17:44:42 +10:00
wallarug
b06fa48735
updated a few files
2019-07-27 16:59:07 +10:00
wallarug
9c57f52d1e
updated pins.c for robohat
2019-07-27 16:56:03 +10:00
wallarug
24e84adc6d
further robohat cleanups
2019-07-27 16:38:47 +10:00
wallarug
e2b83e2dd9
minor changes robohat d21
2019-07-27 16:36:13 +10:00
wallarug
36008de2ed
added custom ld file for samd51 no crystal, ext flash
2019-07-27 16:29:30 +10:00
wallarug
eda3423e35
updated to v1.7 board (samd51)
2019-07-27 16:27:41 +10:00
Scott Shawcroft
c61c874a6d
Reduce feather_m0_supersized build size
...
Make it match feather_m0_express
2019-07-26 00:31:41 -07:00
Scott Shawcroft
a87094e01f
Turn off GC opt to save space on Trinket Haxpress
2019-07-25 22:56:46 -07:00
Scott Shawcroft
4e7de436b4
Update constructors of boards with displays
2019-07-25 22:48:11 -07:00
Scott Shawcroft
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro
2019-07-19 16:11:13 -07:00
Scott Shawcroft
b9b9ef227f
Turn off bitbanging on Hallowing to save code space.
2019-07-19 16:10:33 -07:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
Kattni Rembor
582acdaa0a
Requested changes.
2019-07-09 16:12:24 -04:00
Kattni Rembor
d905958db1
Adding PyRuler to CircuitPython.
2019-07-09 16:02:39 -04:00
jandjstudios
46b7575550
Initial commit to support boards in the datum series.
2019-07-06 13:41:03 -07:00
Chris Osterwood
97e7fea517
Change pin names to be more descriptive
2019-07-04 13:23:57 -04:00
Chris Osterwood
539502c891
Remove pin reservations. Prevents used from inside of CircuitPython code
2019-07-04 13:22:36 -04:00
Radomir Dopieralski
e45eac5016
Switch the terminal font for ugame10
...
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).
It might make sense to also use that font in other boards.
2019-07-01 23:05:07 +02:00
Scott Shawcroft
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402
2019-06-27 14:06:26 -07:00
Scott Shawcroft
fe507db45f
Shrink pIRkey build down.
...
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
2019-06-26 16:49:23 -07:00
Scott Shawcroft
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced
...
Add PyGamer Advance and fix Joystick pins
2019-06-19 12:32:36 -07:00
Scott Shawcroft
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage
...
Add support for PyGamer to Stage library
2019-06-18 18:23:08 -07:00
Scott Shawcroft
352bf7eaf5
Add PyGamer Advance and fix Joystick pins
2019-06-18 12:22:20 -07:00
Radomir Dopieralski
5803245009
Add support for PyGamer to Stage library
2019-06-18 19:05:51 +02:00
Scott Shawcroft
2dddccb99e
Update board inits for new api.
2019-06-17 18:03:30 -07:00
brentru
ea2c068e11
COLMOD is 1 param, remove CASET/RASET in CircuitPython
2019-06-17 11:20:25 -04:00
brentru
207dc885a6
removed incorrect gamma code, looks better now
2019-06-14 16:34:30 -04:00
brentru
4092294e7c
tft working init. sequence, still undersaturated
2019-06-14 16:17:05 -04:00
brentru
0bc74172a2
Add pybadge airlift, sans-tft
2019-06-14 14:46:19 -04:00
Scott Shawcroft
0b1f605a9b
Turn off gc opt for more M0 boards
2019-06-12 13:20:21 -07:00
Scott Shawcroft
eb21fc3e31
Add partial display update support.
...
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.
Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.
This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.
Fixes #1169 . Fixes #1705 . Fixes #1923 .
2019-06-12 11:32:39 -07:00
Dan Halbert
ba1b36a800
Uncomment vm.c SUPEROPT (debugging typo); trim a few builds
2019-06-12 13:09:09 -04:00
Dan Halbert
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
Dan Halbert
0b3f29780a
shrink a bunch of builds to fit
2019-06-11 18:46:06 -04:00
Dan Halbert
4fc189b60c
Merge latest 4.0.x fixes into master
2019-06-11 16:16:29 -04:00
shazz
9c49af0597
Added pin for SD CS
2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter
1da8d4b4da
Add PS/2 support -- ps2io module
2019-06-04 18:05:46 -03:00
Dan Halbert
4e85c1ef91
Implement forced clean builds for boards so designated.
...
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.
Fixes #1910 .
2019-05-24 15:32:24 -04:00
Dan Halbert
e84f3b1c6a
make crickit cpx pinyin build fit
2019-05-23 21:22:50 -04:00
Dan Halbert
0199d9810b
Make pinyin fit on cpx
2019-05-21 15:18:56 -04:00
Dan Halbert
008bbc944c
correct USB PIDs for several boards
2019-05-16 10:54:15 -04:00
Scott Shawcroft
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub
...
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:42:51 -07:00
Chris Osterwood
a0497553fc
Fix to prevent critical pins from being reset when MCU restarts or enters REPL
2019-05-14 15:23:33 -04:00
Chris Osterwood
420dbafa9d
Added board definition for Capable Robot Programmable USB Hub
2019-05-14 13:28:24 -04:00
sabas1080
9f082ba5cb
Fix pin lost
2019-05-13 10:18:53 -05:00
Scott Shawcroft
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech
...
Add Escornabot Makech of Electronic Cats
2019-05-10 12:39:58 -07:00
sabas1080
d174ce8821
Update pins define
2019-05-10 13:34:02 -05:00
Scott Shawcroft
67007282c9
Tighten down inlining on the pIRkey
2019-05-10 11:19:27 -07:00
sabas1080
27ea1df710
Init escornabot
2019-05-08 15:48:17 -05:00
sabas1080
08a170388d
fix VID and PID inverted
2019-05-08 10:09:49 -05:00
ladyada
ed8e6e8f45
re-add i2s (its J not G!)
2019-04-29 20:30:53 -04:00
ladyada
fa3a52bc1e
similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :)
2019-04-29 20:29:48 -04:00
wallarug
aa3c28787c
removed problem libraries from frozen build.
2019-04-28 00:09:13 +10:00
wallarug
b4a70daf17
updated lots
2019-04-27 22:35:12 +10:00
wallarug
cd4aaa13a3
added robohatmm1 board defs.
2019-04-25 21:13:41 +10:00
ladyada
a5697470e1
fix up pybadge for final release board (swap backlite and reset)
2019-04-23 16:43:20 -04:00
Dan Halbert
0113e0970e
add Display.__init__() args for brightness and auto_brightness
2019-04-18 15:59:16 -04:00
Dan Halbert
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift
...
Add GamePadShift for handling shift-register-based buttons
2019-04-17 10:22:24 -04:00
Scott Shawcroft
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift
2019-04-16 11:23:41 -07:00
Scott Shawcroft
f58446e937
Merge branch 'master' into master
2019-04-16 10:32:38 -07:00
ITACA Innovation S.R.L
2d303213ed
Add files via upload
2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L
4f5a7ffe46
Updates: VID&PID, pinout
...
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
2019-04-16 16:45:47 +02:00
Scott Shawcroft
c927e6b938
Split GamePadShift from GamePad to save space on most boards.
2019-04-15 15:40:06 -07:00
Scott Shawcroft
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage
...
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:25:50 -07:00
Radomir Dopieralski
ade6bd8185
Enable _stage module and freeze stage library on the PyBadge
2019-04-15 14:38:02 +02:00
siddacious
5135ee52d9
Changing to support for CP32-M4 wrover
2019-04-14 19:45:44 -07:00
Radomir Dopieralski
eeef5359f9
Merge branch 'master' into gamepad-shift
2019-04-13 11:54:25 +02:00
Dan Halbert
f8473f4a39
Merge pull request #1788 from tannewt/pinyin
...
Add Chinese (Pinyin) and slim down boards so it fits
2019-04-12 20:36:59 -04:00
Scott Shawcroft
defc6dceb0
Slim down feather m0 express
2019-04-12 16:18:08 -07:00
Scott Shawcroft
796fc3f5ab
Update font location and shrink a bunch of builds
2019-04-12 15:25:48 -07:00
Scott Shawcroft
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio
...
Enable displayio for the ugame10 board
2019-04-12 13:26:51 -07:00
Scott Shawcroft
7161038d6b
Turn off displayio
because it is a satellite
2019-04-12 11:54:32 -07:00
Radomir Dopieralski
0599286e32
Use never_reset in ugame10
2019-04-12 20:45:52 +02:00
Radomir Dopieralski
947662415c
Disable gamepad for feather_m0_express_crickit
2019-04-12 20:43:29 +02:00
Max Holliday
41499ac315
No I2S on G19
2019-04-12 10:06:17 -07:00
Max Holliday
e85b6fb83c
adding kicksat-sprite board
...
See https://github.com/RoboticExplorationLab/sprite for details
2019-04-12 10:06:17 -07:00
Radomir Dopieralski
dabbded622
Got back to using Display object in the Stage library
2019-04-12 11:19:19 +02:00
Radomir Dopieralski
c3136f4f32
Enable displayio for uGame10 board
...
Also, make the _stage library work with the fourwire bus, to re-use the
display.
2019-04-12 01:10:57 +02:00
Radomir Dopieralski
5603d0cd38
Configure the TFT spi to 24MHz by default
...
That is (slightly) out of spec for the display, but it works reliably.
2019-04-11 15:47:26 +02:00
Scott Shawcroft
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline.
2019-04-10 14:09:14 -07:00
ladyada
894c1e9590
Rev D/E (beta) hardware!
2019-04-10 08:37:20 -04:00
Dan Halbert
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free
...
Check that a never free pointer is on the heap.
2019-04-10 08:26:37 -04:00
Scott Shawcroft
44e32506ed
Don't make Pins for those not connected on Itsy M0
2019-04-10 00:06:59 -07:00
Dan Halbert
c0c809ad4b
Fix version skew for bast_pro_mini build
2019-04-09 22:52:53 -04:00
Dan Halbert
d8763debf5
shrink sparkfun_lumidrive build
2019-04-09 21:23:28 -04:00
Dan Halbert
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master
...
Added Bast Pro Mini M0
2019-04-09 20:53:05 -04:00
Scott Shawcroft
129e725599
Merge branch 'master' into master
2019-04-09 14:40:36 -07:00
Scott Shawcroft
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi.
...
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
2019-04-09 12:36:14 -07:00
Scott Shawcroft
ef23ffe584
Turn off audiobusio on Hallowing to free rom
...
It is about 5kb and the pins aren't broken out for it anyway.
2019-04-09 12:01:00 -07:00
Scott Shawcroft
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
Radomir Dopieralski
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
Scott Shawcroft
7686f93ef4
Fix crash when getting board.SPI outside the VM
...
If one of the default pins was already in use it would crash.
The internal API has been refined to allow us to get the value
without causing an init of the singleton.
Fixes #1753
2019-04-05 19:06:37 -07:00
Melissa LeBlanc-Williams
36b10104d6
Adjusted inline limit to fix Hallowing PL build
2019-04-05 12:17:16 -07:00
Melissa LeBlanc-Williams
7872a33f8b
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331
2019-04-05 11:10:02 -07:00
Dan Halbert
50d72ed993
shrink sparkfun_lumidrive to make room for large translations
2019-04-05 11:23:47 -04:00
Melissa LeBlanc-Williams
af3d809980
Updated boards files with displays
2019-04-04 23:18:15 -07:00
Dan Halbert
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor
...
ROTARYIO_MODULE typo; EIC interrupt handler refactor
2019-04-04 23:53:46 -04:00
Dan Halbert
682e83a63c
Turn off rotaryio on pewpew10 so de_DE will fit
2019-04-04 20:28:32 -04:00
Dan Halbert
29df5930dd
#if EIC handlers; turn off rotaryio in pirkey for space reasons
2019-04-04 16:48:38 -04:00
Sabas
19c6b8aa0c
Merge branch 'master' into master
2019-04-02 23:15:56 -06:00
Dan Halbert
709de9ce9f
Merge pull request #1732 from ladyada/master
...
add airlift lite - samd51j19 + 2MB QSPI
2019-04-02 17:11:59 -04:00
Dan Halbert
10e35f30f0
shrink inline-limit to allow large Hallowing translation to fit
2019-04-01 12:18:25 -04:00
ladyada
8159272a8b
remove old comment
2019-03-31 23:17:19 -04:00
ladyada
89cf60eac3
add airlift lite - samd51j19 + 2MB QSPI
2019-03-31 19:20:15 -04:00
sabas1080
bb7bb80b4a
update bast pro mini m0
2019-03-30 15:28:23 -06:00
Melissa LeBlanc-Williams
8087cb41e5
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-27 20:18:37 -07:00
Dan Halbert
88068876ed
turn off frequencyio for all SAMD21 builds
2019-03-27 17:54:36 -04:00
Dan Halbert
df79e9a732
Merge pull request #1687 from jrcutler/master
...
Enable nvm storage for all samd21x18 boards
2019-03-27 11:10:22 -04:00
Melissa LeBlanc-Williams
f4cede4747
Removed parameter so CS is always toggled
2019-03-26 18:46:13 -07:00
Melissa LeBlanc-Williams
b2ad16f5c8
Removed parameter so CS is always toggled
2019-03-26 18:34:07 -07:00
Melissa LeBlanc-Williams
5f0e71ccb4
Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix
2019-03-26 18:23:02 -07:00
Melissa LeBlanc-Williams
0df40534f3
Merge branch 'master' of https://github.com/adafruit/circuitpython
2019-03-26 18:22:30 -07:00
ITACA Innovation S.R.L
74c5705a9a
Update mpconfigboard.mk
2019-03-25 17:19:40 +01:00
ITACA Innovation S.R.L
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c
2019-03-25 15:59:22 +01:00
ITACA Innovation S.R.L
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk
2019-03-25 15:59:00 +01:00
ITACA Innovation S.R.L
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h
2019-03-25 15:58:37 +01:00
ITACA Innovation S.R.L
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c
2019-03-25 15:57:35 +01:00
ITACA Innovation S.R.L
4886451000
Add files via upload
...
This is a pull request to add support for uChip into the Circuitpython environment.
We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!
What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
2019-03-25 13:06:31 +01:00
Melissa LeBlanc-Williams
c3329e224d
Added Single Byte Boundaries option for certain displays
2019-03-24 23:59:28 -07:00
Justin R. Cutler
41f4f269f1
Disable frequencyio support for samd21-based catwan_usbstick target.
2019-03-24 14:22:23 -04:00
Justin R. Cutler
d6c7bda6d1
Enable 256b of nvm storage for all samd21x18-bootloader.ld boards.
2019-03-24 12:02:07 -04:00
Melissa LeBlanc-Williams
0c33f7fdb4
Enable CS toggle for displayio by default
2019-03-23 20:23:23 -07:00
Melissa LeBlanc-Williams
d2a0ec28a0
Fixed display init on boards with displays
2019-03-23 19:32:15 -07:00
Dan Halbert
eca23a7279
remove i2cslave from feather m0 crickit
2019-03-20 15:38:52 -04:00
Dan Halbert
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
Radomir Dopieralski
a50ee4f650
Add frozen stage module to ugame10 board
...
And also ignore some more pins.
This is needed for the builds on the circuitpython.org to be functional.
2019-03-17 14:03:50 +01:00
Scott Shawcroft
e05ab64398
Squeeze down the feather crickit build
2019-03-13 17:20:18 -07:00
Scott Shawcroft
96a924f5f0
Turn off networking on M0s.
...
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
2019-03-12 17:18:30 -07:00
Scott Shawcroft
2e500a8a29
Copy inline setting on feather m0 express that the metro has.
2019-03-12 14:06:01 -07:00
Scott Shawcroft
b1c572e82e
Fixup the pybadge definition so the screen works.
2019-03-12 11:18:29 -07:00
John Reese
ef4a74e201
Add basic Pybadge board definition
...
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:
```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
2019-03-12 11:12:35 -07:00
Scott Shawcroft
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER
...
add SPEAKER pin alias for PyPortal
2019-03-11 19:16:01 -07:00
caternuson
46fc8a8a86
change order so SPEAKER is first
2019-03-11 17:45:27 -07:00
caternuson
53b7055283
add SPEAKER pin alias for PyPortal
2019-03-11 15:12:29 -07:00
Radomir Dopieralski
caf51cf4eb
Add default devices and tweak brightness in boards/pewpew10
2019-03-11 19:09:21 +01:00
Dan Halbert
26ed411936
Shrink build so de_DE fits
2019-03-07 07:47:18 -05:00
sommersoft
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
Dan Halbert
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x
...
Add support for PewPew 10.x boards
2019-03-01 14:07:32 -05:00
Radomir Dopieralski
2bfafd1fc9
Enable math for pewpew10
2019-03-01 16:55:54 +01:00
Radomir Dopieralski
5d85d54026
Move the frozen pew.py into a submodule
2019-03-01 16:24:22 +01:00
Radomir Dopieralski
89b2788d11
Apply review fixes:
...
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
2019-03-01 16:05:15 +01:00
Radomir Dopieralski
3826ca4194
Rename internal pins to add underscore in front
2019-03-01 15:10:43 +01:00
Radomir Dopieralski
18870255ea
Remove the pewpew70 board definition, leave only pewpew10
2019-03-01 15:06:24 +01:00
Dan Halbert
fb027f2024
Update PyPortal pins to rev C
2019-03-01 09:06:03 -05:00
Radomir Dopieralski
45fea86554
Rebase on top of CircuitPython 4.x
2019-03-01 14:59:21 +01:00
Radomir Dopieralski
59f63eaef6
Handle new buttons
2019-02-28 23:34:03 +01:00
Radomir Dopieralski
55b511a5d8
Use a dedicated timer
2019-02-28 23:33:37 +01:00
Radomir Dopieralski
7ac11ed8e1
Enlarge the usb disk
2019-02-28 23:25:18 +01:00
Radomir Dopieralski
5a1e69f5b8
Correct a typo in the pin name
2019-02-28 23:23:26 +01:00
Radomir Dopieralski
a41ea27596
Add pewpew70 board
2019-02-28 23:23:26 +01:00
Bryan Siepert
3afcd3f5bc
another/different size tweak for the DE hallowing build
2019-02-23 20:18:22 -08:00
Bryan Siepert
2cb31ea546
Merge branch 'master' into bmp_bitdepths
2019-02-23 20:16:57 -08:00
Bryan Siepert
3843e96edc
Tweaking German hallowing build for size
2019-02-23 19:47:58 -08:00
ladyada
85421f9766
final pin names, tested with final release
2019-02-23 15:40:28 -05:00
Dan Halbert
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap
...
Fix displaying images off of SD cards.
2019-02-19 19:28:53 -05:00
Scott Shawcroft
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout
...
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
2019-02-19 16:14:33 -08:00
Scott Shawcroft
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation.
2019-02-19 14:51:39 -08:00
Dan Halbert
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7
...
PYPORTAL:make it easier for people to hookup in spi mode
2019-02-19 14:12:30 -05:00
Dan Halbert
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
TG-Techie
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic
2019-02-18 15:00:14 -05:00