gamblor21
7321411962
Added frequency to parallel display
2021-03-11 19:32:43 -06:00
gamblor21
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
Scott Shawcroft
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc
...
I2CPeripheral samd51 corrections in the CTRLC bit
2021-03-09 12:58:59 -08:00
jposada202020
be90fa80e8
Initial Changes
2021-03-09 10:48:33 -05:00
Jeff Epler
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
Jeff Epler
4f040af481
vm: Make the speed-size trade-off compile time settable
...
.. and enable for all samd21 boards
2021-03-05 18:29:27 -06:00
Dan Halbert
4cf6579e22
remove general changes; not consistent across builds
2021-03-05 10:10:50 -05:00
Dan Halbert
c97721455a
Shrink the smallest builds with compile options
2021-03-04 23:07:06 -05:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
Dan Halbert
0a58d451ad
Merge pull request #4306 from Neradoc/fix-reset-to-safe
...
press reset to safe mode on ports where reset reason is not implemented
2021-03-02 15:44:52 -05:00
Scott Shawcroft
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list
...
displayio: make Group use a python list internally
2021-03-02 09:59:58 -08:00
Dan Halbert
248acd07c8
shrink builds
2021-03-02 12:25:42 -05:00
Radomir Dopieralski
cb2cf81136
ugame10 - disable pulseio to make more room for the French
2021-03-02 11:11:55 +01:00
Dan Halbert
54d11a8e2d
Merge pull request #4299 from jamesbowman/main
...
Add EVE support for Feather M4 Express
2021-03-01 22:56:50 -05:00
Scott Shawcroft
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup
...
Add `bitmaptools` module
2021-03-01 18:24:12 -08:00
James Bowman
0dabd1ace2
Add EVE support for Feather M4 Express
2021-03-01 14:42:48 -08:00
Jeff Epler
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
Scott Shawcroft
7562b0cbb8
Turn off GC opt on catwan_usbstick
2021-02-26 12:00:01 -08:00
Jeff Epler
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
Kevin Matocha
ec4cd68edc
More mpconfigboard.mk corrections for small builds
2021-02-25 17:48:50 -06:00
Kevin Matocha
a7a4f93ff8
Updated build configs to turn off BITMAPTOOLS for smaller builds
2021-02-25 15:44:32 -06:00
Kamil Tomaszewski
fb32e0a7fd
qtpy_m0_haxpress: Change config to make it fit.
2021-02-25 09:44:33 +01:00
Dan Halbert
a30d4ad25d
set SUPEROPT_VM = 0 on most non-Express SAMD21 boards
2021-02-22 23:03:11 -05:00
Dan Halbert
8470f0fdb7
SAMD21: one endpoint pair for MSC now instead of two
2021-02-21 12:37:59 -05:00
Dan Halbert
e344c6d684
fix some builds
2021-02-18 14:24:58 -05:00
Dan Halbert
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
Seth Kerr
9e626fdd5c
new cp sapling board
2021-02-14 20:00:32 -05:00
Dan Halbert
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
Jeff Epler
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
Scott Shawcroft
f6603aa566
Merge pull request #4168 from BHDynamics/main
...
Add DynaLoRa-USB Dongle
2021-02-10 11:03:16 -08:00
Enrique Casado
983c75fb24
Add more pin names
2021-02-10 12:19:50 +01:00
Dan Halbert
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
Dan Halbert
5bb722b927
Merge pull request #4122 from hathach/fix-3986
...
Fix 3986 background reset remove existing usb callback
2021-02-05 09:13:28 -05:00
Enrique Casado
70e15d61b2
ports/atmel-samd/boards/dynalora_usb/board.c
2021-02-05 13:24:59 +01:00
Dan Halbert
25d456a5b8
shrink a couple of builds
2021-02-04 22:15:32 -05:00
Dan Halbert
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
BiffoBear
4eb396806c
Updated trinket_m0 make file to squeeze all translations as per Dan Halbert.
2021-02-03 11:47:56 +07:00
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Patrick Van Oosterwijck
0dbd3293a9
Add board Silicognition LLC M4-Shim
2021-01-30 18:35:35 -07:00
Dan Halbert
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
Scott Shawcroft
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
Dan Halbert
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
Dan Halbert
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
David Glaude
abd9f7894d
Permit Gameduino 3X Dazzler support on that board.
...
Totally untested, change request based on change made in #2581 .
It might be my first PR in CircuitPython core...
Maybe this should be confirmed by @jamesbowman
Those are the two boards that seems supported:
* Metro M4 Express
* Metro nRF52840 Express
The only Metro that this PR concern:
* Metro M4 AirLift Lite
Other Metro I found and are maybe not supported:
* Metro ESP32-S2
* Metro M0 Express
* Metro M7 1011
2021-01-24 12:53:06 +01:00
Dan Halbert
dc421a6ca8
squeeze some builds
2021-01-23 06:18:15 -05:00
Dan Halbert
8c49c8df0a
shrink arduino_mkr1300
2021-01-22 11:26:33 -05:00
Dan Halbert
e3275be8b1
Merge pull request #3911 from hugodahl/add-translation-for-builtin-object-help
...
Update built-in help output for localization (Issue #3907 )
2021-01-22 03:49:19 -05:00
Dan Halbert
63b5e56c72
shrink feather_m0_adalogger and gemma_m0
2021-01-21 23:49:49 -05:00
Dan Halbert
ea9fe24971
shrink arduino_mkrzero build
2021-01-21 18:02:35 -05:00
Dan Halbert
9b8246f889
shrink sparkfun_samd21_dev de_DE build
2021-01-21 15:56:30 -05:00
mrangen
dea2bcd8f0
Fixed comment in mpconfigboard.h
2021-01-17 21:20:27 -07:00
gamblor21
41b9196167
Disabling in more small boards
2021-01-17 00:00:06 -06:00
gamblor21
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
Jeff Epler
c44c99398d
Merge pull request #3983 from dhalbert/6.1.0-shrink-builds
...
shrink some de_DE builds
2021-01-12 20:19:43 -06:00
Jeff Epler
8d24e72981
Merge pull request #3978 from ladyada/neotrinkey
...
samd21 board with only 4 neopixels + two touchpads
2021-01-12 20:19:01 -06:00
Dan Halbert
4b30412871
shrink some de_DE builds
2021-01-12 18:23:37 -05:00
Dan Halbert
4be5e914ac
Merge pull request #3966 from dhalbert/samd-dac-channels
...
fix atmel-samd DAC channel selection logic
2021-01-12 13:01:50 -05:00
lady ada
748d44892d
fix some precommit complaints
2021-01-12 12:55:02 -05:00
lady ada
f7f97ae1b7
samd21 board with only 4 neopixels + two touchpads
2021-01-12 12:50:08 -05:00
Dan Halbert
452d66dd0e
Update ports/atmel-samd/common-hal/analogio/AnalogOut.c
...
whoops, yes!
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-11 19:12:52 -05:00
Scott Shawcroft
10093d37c5
Merge pull request #3960 from dhalbert/pwmout-tcc-resolution
...
Look up TCC resolution as necessary
2021-01-11 15:33:59 -08:00
Scott Shawcroft
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
Dan Halbert
316bd0c72d
fix atmel-samd DAC channel selection logic
2021-01-10 19:22:15 -05:00
Dan Halbert
908e02439d
Look up TCC resolution as necessary
2021-01-09 15:04:23 -05:00
foamyguy
13efbf24e5
disable msgpack on boards without room
2021-01-09 10:33:56 -06:00
Dan Halbert
39c166ba6a
update tinyusb; _ticks_enabled only for SAMD21
2021-01-08 13:30:11 -05:00
Dan Halbert
9a1d864331
overflowed tick counter needs 64 bits everywhere
2021-01-06 11:09:06 -05:00
iot49
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
Kattni Rembor
bbd4de33d1
Add adafruit_bus_device to CPX builds.
2021-01-04 15:53:39 -05:00
Benjamin Shockley
9286f26831
Added CP Dotstart Lib to Build
...
Added the CircuitPython dotstar library to the Mini SAM M4 build so users do not have to include the library to utilize the built-in APA102 LED.
2021-01-03 10:42:58 -06:00
Jeff Epler
83c6774a44
Revert "Removing frozen libs"
...
This reverts commit 23ed3ef971
2020-12-30 10:55:28 -06:00
microDev
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
Uwe Gartmann
2729666d82
SAMD51: change of DAC power setting
...
Fixes wrong DAC output levels at high data rate
closes adafruit#3796
2020-12-25 17:53:43 +01:00
Scott Shawcroft
eb65765d52
Merge pull request #3867 from dhalbert/frequencyin-fix-6.0.x
...
FrequencyIn: do not raise in interrupt handler
2020-12-23 12:14:16 -08:00
Dan Halbert
89079039ad
FrequencyIn: do not raise in interrupt handler
2020-12-22 18:54:42 -05:00
Dan Halbert
f202eb734a
Merge pull request #3842 from StackRduino/main
...
add stackrduino_m0_pro
2020-12-18 12:33:34 -05:00
Dan Halbert
8f9cd7075e
Merge pull request #3752 from jepler/gcc10
...
build: Update to gcc10
2020-12-17 11:03:40 -05:00
Hany Elkomy
7afa1a1d76
Update mpconfigboard.mk
...
reduced to CFLAGS_INLINE_LIMIT = 35 for tranaslations
2020-12-17 22:47:01 +08:00
Hany Elkomy
06022a5e91
Update mpconfigboard.mk
...
changed CFLAGS_INLINE_LIMIT = 55
2020-12-17 21:58:24 +08:00
Hany Elkomy
81ff95a8eb
Add files via upload
2020-12-17 20:29:54 +08:00
Hany Elkomy
bc95c7f219
Delete board.c
2020-12-17 17:08:52 +08:00
Hany Elkomy
f3fb014166
Delete mpconfigboard.h
2020-12-17 17:08:50 +08:00
Hany Elkomy
1284418fa7
Delete mpconfigboard.mk
2020-12-17 17:08:48 +08:00
Hany Elkomy
736c0d4c3d
Delete pins.c
2020-12-17 17:08:46 +08:00
Hany Elkomy
0a7c74230c
Update mpconfigboard.mk
...
updated for 6.1
2020-12-17 16:26:54 +08:00
Hany Elkomy
109e147b46
Update board.c
...
updated path to board.h
2020-12-17 16:22:47 +08:00
Hany Elkomy
23ad9c7402
Update mpconfigboard.h
...
removed whitespace
2020-12-17 15:17:04 +08:00
Hany Elkomy
3d9e4958c5
Add files via upload
2020-12-17 14:24:24 +08:00
Hany Elkomy
f3b7cd6a5d
Delete pins.c
2020-12-17 14:24:07 +08:00
Hany Elkomy
70739ff639
Update pins.c
2020-12-17 13:11:53 +08:00
Hany Elkomy
fac0bf1db8
Add files via upload
2020-12-17 12:37:32 +08:00
Dan Halbert
4521dfb732
squeeze some smaller boards
2020-12-15 13:23:49 -05:00
Dan Halbert
fb33c4e1c0
-ftree-vrp better diagnostics on -Os builds; -fno-inline-functions for -O2; fix struct init in HCI bleio
2020-12-15 12:23:56 -05:00
Dan Halbert
97947b4fe9
shrink bast_pro_mini_m0; use proper flex-array syntax
2020-12-14 22:07:54 -05:00
Dan Halbert
6abe3cd0ef
-Os for SAMD51; fix CSUPEROPT typo
2020-12-14 18:57:31 -05:00
Thea Flowers
fe32dd08b8
Update Big Honking Button configuration to support its newest board revision.
...
v5 of the BHB board has:
* GD25Q64C instead of the GD25Q16C.
* Pin PB10 tied to ground for board revision detection.
2020-12-12 19:16:35 -05:00
Scott Shawcroft
344d3c59cb
Merge branch 'main' into msgpack
2020-12-11 11:10:30 -08:00
Scott Shawcroft
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
Scott Shawcroft
1130b80e2a
Merge pull request #3612 from gamblor21/bus_device
...
Moving Adafruit_CircuitPython_BusDevice to core
2020-12-02 13:23:02 -08:00
Scott Shawcroft
608c98501b
Merge remote-tracking branch 'adafruit/main' into msgpack
2020-12-02 13:10:39 -08:00
Scott Shawcroft
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
gamblor21
cb863e4c5c
Added to partial builds where frozen removed
2020-12-01 22:19:48 -06:00
Bernhard Boser
59c3e25168
disable on boards tight on memory. add stddef.h to imports (not actually needed).
2020-12-01 18:39:24 -08:00
Dan Halbert
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
Mark
237385798c
Merge branch 'main' into bus_device
2020-12-01 15:47:16 -06:00
Scott Shawcroft
a975ef4971
Merge pull request #3695 from cwalther/movable
...
Add movable supervisor allocations
2020-11-30 16:00:55 -08:00
Scott Shawcroft
98cf7f67d4
Merge pull request #3773 from dhalbert/no-samd21-complex-arithmetic
...
Disable complex arithmetic on SAMD21 builds to make space
2020-11-30 13:47:56 -08:00
Dan Halbert
dbfabddf58
rename ESP TX and RX pins; remove support
2020-11-30 11:11:04 -05:00
Dan Halbert
9768951a2a
Disable complex arithmetic on SAMD21 builds to make space
2020-11-29 15:34:38 -05:00
Dan Halbert
848eb28132
esp-uart-pins
2020-11-28 14:52:56 -05:00
Christian Walther
c7404a3ff8
Add movable allocation system.
...
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
Dan Halbert
28d9e9186e
Disable complex arithmetic on SAMD21 builds to make space
2020-11-28 10:12:46 -05:00
Dan Halbert
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
Dan Halbert
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
Jeff Epler
e778fc1f87
Merge pull request #3741 from hathach/fix-cdc-connection-race
...
update tinyusb to fix cdc connection race
2020-11-24 19:11:41 -06:00
Scott Shawcroft
8364734ba3
Merge pull request #3749 from skerr92/add-cpsapling-spiflash
...
Add cpsapling spiflash
2020-11-24 15:22:21 -08:00
Jeff Epler
c451b22255
Disable 3-arg pow() function on m0 boards
...
`pow(a, b, c)` can compute `(a ** b) % c` efficiently (in time and memory).
This can be useful for extremely specific applications, like implementing
the RSA cryptosystem. For typical uses of CircuitPython, this is not an
important feature. A survey of the bundle and learn system didn't find
any uses.
Disable it on M0 builds so that we can fit in needed upgrades to the USB
stack.
2020-11-24 16:54:33 -06:00
Seth Kerr
686edcef3f
fixing PID issues with CI Test (whoops)
2020-11-24 07:41:32 -05:00
Seth Kerr
e5cee98977
removing icy tree files/directory
2020-11-23 19:31:06 -05:00
Seth Kerr
2635132ce5
adding 'haxpress' kind of build for CP Sapling for use with SPI Flash
2020-11-23 19:21:12 -05:00
Scott Shawcroft
491e314799
Merge pull request #3718 from jepler/epd-rotation
...
EPaperDisplay: add rotation property
2020-11-23 15:04:26 -08:00
Dan Halbert
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
Dan Halbert
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
Seth Kerr
1c92b1bf61
forgot to run pre-commit local
2020-11-20 15:35:52 -05:00
Seth Kerr
c4f4cdd8c1
readding cp_sapling directory
2020-11-20 15:31:49 -05:00
Seth Kerr
29e91424d4
removing cp sapling temporarily to read
2020-11-20 15:29:35 -05:00
Seth Kerr
b69bbfa3d6
fixed issues with trailing whitespace check
2020-11-20 15:17:44 -05:00
Seth Kerr
0a06530d52
adding CP-Sapling
2020-11-20 15:06:57 -05:00
Jeff Epler
aaca3eccf1
samd: PDMIn: Reduce code unrolling on samd21 only
...
Instead of unrolling the code 16 times, unroll it 4 times and loop
over it 4 times. This gives the same 16 iterations, but at an expense
of less flash space.
2020-11-19 16:19:37 -06:00
Jeff Epler
0556f9f851
Revert "samd21: Enable terse error reporting on resource constrained chip family"
...
This reverts commit 9a642fc049
2020-11-19 15:12:56 -06:00
Jeff Epler
9a642fc049
samd21: Enable terse error reporting on resource constrained chip family
...
This reclaims over 1kB of flash space by simplifying certain exception
messages. e.g., it will no longer display the requested/actual length
when a fixed list/tuple of N items is needed:
if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
mp_raise_ValueError(translate("tuple/list has wrong length"));
} else {
mp_raise_ValueError_varg(translate("requested length %d but object has length %d"),
(int)len, (int)seq_len);
Other chip families including samd51 keep their current error reporting
capabilities.
2020-11-18 20:37:36 -06:00
Dan Halbert
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
Dan Halbert
bb77f1d130
wip: initial code changes, starting from @tannewt's sleepio branch
2020-11-16 11:56:20 -05:00
Scott Shawcroft
bda3267432
Save flash space
...
* No weak link for modules. It only impacts _os and _time and is
already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
M0 Express.
* Change ejected default to false to move it to BSS. It is set on
USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
RAM.
2020-11-13 18:57:52 -08:00
Scott Shawcroft
68eb809fbf
Update parallel bus signatures
2020-11-13 18:57:52 -08:00
Scott Shawcroft
c9952798fb
Merge pull request #3683 from BHDynamics/dynossat_edu
...
Rename pins on dynossat_edu_eps to make them the same as the Arduino core
2020-11-12 12:33:16 -08:00
Enrique Casado
aa68b17223
Freed some more space
2020-11-12 13:26:26 +01:00
Enrique Casado
9774736a50
Rename pins to make them the same as the Arduino core
2020-11-12 12:30:34 +01:00
gamblor21
23ed3ef971
Removing frozen libs
2020-11-11 11:36:04 -06:00
gamblor21
f61c4e62c1
Removing from smaller builds
2020-11-11 10:24:33 -06:00
Dan Halbert
36a8828fa3
Merge pull request #3632 from dhalbert/add-binascii
...
add binascii to most builds
2020-11-05 16:16:41 -05:00
Scott Shawcroft
e02539bdf5
Merge pull request #3633 from ITACAInnovation/patch-2
...
Update pins.c
2020-11-04 10:30:09 -08:00
ITACA Innovation S.R.L
ca935c0daf
Update pins.c
...
Changed builtin to standard
2020-11-03 21:22:19 +01:00
Scott Shawcroft
441c2c41fb
Merge pull request #3641 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-11-03 09:46:44 -08:00
Dan Halbert
1f7a3f0dfa
Rev C Feather M4 CAN pin changes
2020-11-02 15:28:30 -05:00
Brian Dean
041c2a9f61
.../boards/bdmicro_vina_d51: PAD updates for better resource flexibility.
2020-11-02 08:35:25 -05:00
ITACA Innovation S.R.L
4e52757f26
Update pins.c
...
Added LED, BOOST_EN and VEXT_SELECT pins.
2020-11-01 22:22:55 +01:00
Dan Halbert
72b829dff0
add binascii to most builds
2020-11-01 14:52:03 -05:00
Jerry Needell
1762a36438
restore analogio to feather_m0_rfm9x/rfm69 builds
2020-11-01 05:46:13 -05:00
Dan Halbert
144eb131ae
Merge pull request #3627 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-10-31 12:28:20 -04:00
ITACA Innovation S.R.L
9a8484b853
Update mpconfigboard.h
...
Removed ignore PA30 PA31 in order to allow using them as pinout
2020-10-31 11:06:56 +01:00
ITACA Innovation S.R.L
a7616808e9
Updated pinout
2020-10-31 10:12:49 +01:00
Dan Halbert
59b9ca409c
matrixportal ESP TX and RX pins were swapped
2020-10-28 20:33:10 -04:00
microDev
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
microDev
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
Scott Shawcroft
54c0e98a37
Fix openbook build
2020-10-27 13:58:23 -07:00
Jeff Epler
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x
...
Merge in two fixes from 6.0.x
2020-10-21 20:12:20 -05:00
Scott Shawcroft
1a677406bf
Merge pull request #3529 from jensechu/color-converter-transparency
...
displayio: Pass transparent_color to ColorConverter
2020-10-20 10:41:57 -07:00
Scott Shawcroft
8beb36c240
Use one lto partition
...
This leads to smaller code size at the expense of slower linking.
We can turn partitioning back on with GCC10 because it produces smaller code.
2020-10-20 09:24:03 -07:00
Christian Walther
1eab0692b5
Fix missing nproc on macOS.
...
396979a
2020-10-20 16:39:32 +02:00
Scott Shawcroft
eb139c9bab
Correct pins to not reset.
...
They must have the PORT_ prefix otherwise they mask the wrong pins.
Fixes #3552
2020-10-19 17:41:16 -07:00
Jeff Epler
cc411f47eb
samd: Update peripherals submodule
...
(https://github.com/adafruit/samd-peripherals/pull/37 )
2020-10-17 20:08:32 -05:00
Jeff Epler
fb768dfc14
samd: AnalogOut: Better handle boards which IGNOREd analog pins
2020-10-17 20:08:32 -05:00
Jeff Epler
194d99f588
sparkfun_lumidrive: Can't IGNORE pins that are default bus pins
...
The SDA, SCL, and MISO pins were ignored. This error was not diagnosed
before now.
2020-10-17 20:08:32 -05:00
Jeff Epler
eb0b023dee
samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins
2020-10-17 20:08:32 -05:00
Jeff Epler
4b9fc5de53
samd: update peripherals submodule
...
this is possible now that the undefined reference to pin_PA30 has been
resolved.
2020-10-17 20:08:32 -05:00
Jeff Epler
aa3c890ead
samd: pin: Fix 'undefined reference to pin_PA30'
...
.. when PA30 is IGNOREd
2020-10-17 20:08:32 -05:00
Jeff Epler
396979a67e
atmel-samd: parallelize lto linking
...
This decreases the link time, especially on desktop machines with many CPU
cores. However, it does come at a slight cost in binary size, making the flash
section about 200 bytes bigger for circuitplayground_express.
Before, linking build-circuitplayground_express/firmware.elf takes
8.8s elapsed time, leaving 3128 bytes free in flash.
After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed
time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free)
If necessary, we can make this per-board or even per-translation to squeeze full
builds.
2020-10-17 20:08:32 -05:00
Scott Shawcroft
878f2322e7
Merge pull request #3564 from BHDynamics/dynossat_edu
...
Add DynOSSAT-EDU boards
2020-10-16 11:30:42 -07:00
Enrique Casado
6631c8d393
Add USB VID&PID
2020-10-16 13:52:46 +02:00
Dan Halbert
12ed3fc72f
disable on winterbloom_sol and thunderpack
2020-10-15 18:48:28 -04:00
Dan Halbert
f51e75c1d2
cxd56 needed more precise include for __packed; needed SRC_C += on some ports
2020-10-15 15:24:24 -04:00
Dan Halbert
82b49afe43
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit
2020-10-15 11:27:21 -04:00
Enrique Casado
97fae54659
Add DynOSSAT-EDU boards
2020-10-15 12:39:14 +02:00
Dan Halbert
f1e8f2b404
Merge pull request #3554 from gamblor21/move_ordereddict
...
Moved ORDEREDDICT define to central location
2020-10-14 22:39:04 -04:00
gamblor21
0a9bcc538b
Removed ordered dict for all SAMD21
2020-10-14 20:15:21 -05:00
Brian Dean
852a91e1b7
boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen).
2020-10-14 08:29:28 -04:00
Limor "Ladyada" Fried
e9c04bc1f0
Merge pull request #3550 from bd34n/bdmicro_vina_d51
...
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 23:15:25 -04:00
gamblor21
4270061db4
Moved ORDEREDDICT define to central location
2020-10-13 18:52:27 -05:00
Brian Dean
2b33968a1e
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 16:46:25 -04:00
Scott Shawcroft
2bc40bcadf
Remove readreq when changing continuous
2020-10-13 10:15:34 -07:00
Scott Shawcroft
379e73af2e
Finer grained, per port tick locking
...
Fixes #3504 hopefully.
2020-10-12 18:43:21 -07:00
Scott Shawcroft
bb046f9983
Merge pull request #3540 from WarriorOfWire/async_syntax
...
__await__ magic method and async/await
2020-10-12 15:31:43 -07:00
Kenny
10badd93c3
leftover newlines
2020-10-11 22:52:27 -07:00
Kenny
94beeabc51
remove unnecessary board configuration and address feedback
2020-10-11 22:42:59 -07:00
Kenny
3c46e3a6aa
Turn off async for circuitplayground express
...
Firmware too large
2020-10-11 08:16:36 -07:00
warriorofwire
f5f1e29dc0
disable async/await on a several small ucontrollers
2020-10-10 15:43:12 -07:00
Radomir Dopieralski
3f6ca7bd32
Make end-of-line-fixer happy
2020-10-10 23:59:44 +02:00
Radomir Dopieralski
b227b79dec
Fix #3504 : Don't use time module in pew.tick()
...
The time.sleep() and time.monotonic() functions break the timer
interrupt on which PewPew10 display relies, so we can't use them
anymore. Instead I'm adding a time-keeping function to the display
code itself, which then can be used in pew.tick() internally.
2020-10-10 20:26:33 +02:00
lady ada
70a94c8d2d
fix for https://github.com/adafruit/circuitpython/issues/3534
2020-10-10 12:27:35 -04:00
Scott Shawcroft
3ccf644dd0
Fix autoreload on SAMD21
...
The issue was that a time.sleep() would set the RTC wake up
further into the future even if we wanted to tick every ms. Ticking
every ms is used to time the autoreload delay and without it,
autoreload doesn't work.
Fixes #3528
2020-10-09 12:53:00 -07:00
gamblor21
085d2a2274
Update submodule to merge commit
2020-10-07 14:09:26 -05:00
Jeff Epler
16ed875f4e
canio: remove unused fields
...
these relate to properties that were removed as well
2020-10-06 20:14:50 -05:00
Scott Shawcroft
d62ac24493
Merge pull request #3469 from jepler/noreturn
...
Add some NORETURN attributes
2020-10-01 11:18:36 -07:00
Scott Shawcroft
5ac3c36d64
Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107
...
New quirk for sh1107
2020-09-30 12:03:10 -07:00
Jeff Epler
c129c8f296
Merge remote-tracking branch 'origin/main' into canbus-api-changes
2020-09-29 20:15:11 -05:00
Jeff Epler
2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate
...
Update make translate script
2020-09-29 14:32:49 -05:00
Jeff Epler
611f81ac1a
canio: actually drop the _error_count properties
...
thanks @tannewt
2020-09-29 14:25:53 -05:00
microDev
4c7d9e3aaf
Update make translate script
2020-09-29 11:14:30 +05:30
Jeff Epler
726dcdb60a
Add some NORETURN attributes
...
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
// precondition: you already verified that a slot was available
for (int i=0; i<NUM_SLOTS; i++) {
if( slot_free(i)) {
return i;
}
}
safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.
So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN.
Additional notes:
* stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway.
* ditto cxd56
* esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested)
* litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
* cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
* In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
* the stub safe_mode reset simply aborts. This is used in mpy-cross.
2020-09-28 18:55:56 -05:00
mdroberts1243
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107
2020-09-28 19:40:47 -04:00
Jeff Epler
f4e36fc7f6
CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field
2020-09-28 17:22:00 -05:00
Jeff Epler
3e97e9c4be
canio: Listener: shuffle function declarations around
2020-09-28 17:22:00 -05:00
Jeff Epler
48bda589b8
Listerner: read -> receive, drop readinto
...
This prepares for creating a separate RemoteTransmissionRequest class
2020-09-28 17:22:00 -05:00
Jeff Epler
79ca430ddf
Match: address -> id
2020-09-28 17:22:00 -05:00
Anson He
96323ac3ac
Default power on Wio Terminal's 40 Pin
2020-09-27 10:21:25 +08:00
Jeff Epler
791d20f16c
give qtpy haxpress its own USB PID
2020-09-26 11:45:53 -05:00
Jeff Epler
9944935fde
qtpy haxpress: enable RTC
2020-09-26 11:33:10 -05:00
Mark Roberts
22a7696fac
Changes take 2: missed ugame10 board
2020-09-25 22:17:59 -04:00
Mark Roberts
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
Jeff Epler
eadb4de144
qtpy_m0_haxpress: add
2020-09-24 16:58:24 -05:00
Scott Shawcroft
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0
...
fix pins for rev C
2020-09-23 11:31:28 -07:00
lady ada
9db7625717
neopix is default on!
2020-09-23 11:19:01 -04:00
lady ada
5384479a61
fix pins for rev C
2020-09-22 23:28:23 -04:00
Jeff Epler
59580d0f2d
canio: Fix implementation bugs in atmel-sam
2020-09-22 09:36:29 -05:00
Jeff Epler
4869dbdc67
canio: rename from _canio
...
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
Jeff Epler
9e8f1820c8
canio.CAN: switch rx/tx, make both mandatory, move declarations around
2020-09-21 16:44:26 -05:00
Jeff Epler
4e4853dcb2
common.template.ld: remove unneeded line
2020-09-21 16:44:26 -05:00
Jeff Epler
df379b84cb
remove unneeded symbols
2020-09-21 16:44:26 -05:00
Jeff Epler
7fd6cab2ac
canio: Make both tx and rx (but not both) optional
...
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification
.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
Jeff Epler
09f8a83a75
samd: template.ld: put canram in its own output section
2020-09-21 16:44:26 -05:00
Jeff Epler
a76119afcb
add _canio to Feather M4 CAN
2020-09-21 16:44:26 -05:00
Jeff Epler
67d8f108bb
Add CAN to SAM E51 clock config
2020-09-21 16:44:26 -05:00
Jeff Epler
44c5b2bbb1
Respond to review comments
...
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
Jeff Epler
58b920ed97
fix whitespace
2020-09-21 16:44:26 -05:00
Jeff Epler
27cbb690e5
_canio: Add listener matching
...
Lightly tested:
* no matches (catch-all)
* standard address single address matches (even and odd positions)
* standard address mask matches
* only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
Jeff Epler
635fcadb59
_canio.CAN: add error handling & bus state
2020-09-21 16:44:26 -05:00
Jeff Epler
a2e1867f69
_canio: Minimal implementation for SAM E5x MCUs
...
Tested & working:
* Send standard packets
* Receive standard packets (1 FIFO, no filter)
Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.
Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
Jeff Epler
183649aad8
samd: move mcu_find_pin_function to header
...
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
Dan Halbert
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21
...
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
2020-09-19 13:41:21 -04:00
Dan Halbert
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
...
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
Dan Halbert
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
...
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
Dan Halbert
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
...
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
Jeff Epler
45eec5b5a5
samd: SPI: improve conditional code
...
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4. However, the problem was in our SPI code.
A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.
Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.
Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.
Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
Jeff Epler
c73182803d
sdioio: fix code for the case where there is no SDHC1
...
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
Jeff Epler
1b29ceaf1a
sam e54: disable microcontroller.cpu.voltage
...
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
Scott Shawcroft
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
...
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
Brian Dean
81ee874531
pins.c: fix trailing whitespace
2020-09-16 16:40:04 -04:00
Brian Dean
847d609ddc
rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately
2020-09-16 16:27:24 -04:00
Jeff Epler
1fc797132a
Merge pull request #3237 from DavePutz/issue3216
...
Issue#3216 - Needed an alternate way to check if background tasks were run
2020-09-16 08:47:33 -05:00
Scott Shawcroft
95e27bb8bf
Add more PIDs for unique boards
2020-09-15 13:43:35 -07:00
Dan Halbert
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can
...
atmel-samd: add same51, feather_m4_can
2020-09-14 23:57:51 -04:00
Jeff Epler
067a975875
update submodules to merge commits
2020-09-14 17:22:30 -05:00
DavePutz
2a2a8d6457
Merge pull request #28 from adafruit/main
...
Merge from adafruit/main
2020-09-14 16:50:40 -05:00
DavePutz
2eca4ee902
Update PulseIn.c
2020-09-14 11:04:45 -05:00
DavePutz
c014ac3089
Reworked check for input taking too long
2020-09-14 10:54:57 -05:00
Jeff Epler
af24c8ae06
Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic
...
Conflict in locale/circuitpython.pot resolved with 'make translate'
2020-09-13 14:21:21 -05:00
Jeff Epler
73ad78ed1b
Merge pull request #3395 from microDev1/safeMode
...
Add esp32s2 safe mode support & fix user_safe_mode output
2020-09-13 14:18:59 -05:00
Jeff Epler
90f7340bfc
move implicit-fallthrough warning enable to defns.mk
2020-09-13 13:13:09 -05:00
microDev
36da92075b
Update safe mode reason
2020-09-13 22:57:24 +05:30
microDev
5deac8d249
Update board specific safe mode message
2020-09-13 18:22:40 +05:30
lady ada
2fac4851a5
fix typo, tested hardware, neopixel doesnt work tho
2020-09-12 19:56:13 -04:00
lady ada
6fff4ec00d
cutie variant
2020-09-12 19:00:26 -04:00
Jeff Epler
01fdd9598a
disable iimplicit-fallthrough warning inside asf4
...
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes) I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
2020-09-12 17:48:42 -05:00
Jeff Epler
5729097bc4
atmel-samd: enable build error for implicit fallthrough
...
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate. I only tested a few builds (trinket m0
and metro m4 express)
2020-09-12 15:11:29 -05:00
Jeff Epler
cacb0124ac
feather_m4_express: Use quad data mode on flash
...
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.
Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
Scott Shawcroft
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
Jerry Needell
2529ee2359
freeze rfm69 and bus_device libraries int feather_m0_rfm69
2020-09-09 14:54:20 -04:00
Jeff Epler
b49099c8f3
additional asf4 updates
2020-09-08 15:31:13 -05:00
Jeff Epler
e066448e36
atmel-samd: add same51, feather_m4_can
...
This is compile-tested, and requires updates in the related submodules:
https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37
This should not be merged until those can also be merged.
2020-09-08 13:06:45 -05:00
root
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
Dan Halbert
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c
...
fix pins for trellis_m4 board.I2C()
2020-09-04 11:15:18 -04:00
Dan Halbert
960888a3bd
fix pins for trellis_m4 board.I2C()
2020-09-03 14:22:18 -04:00
Scott Shawcroft
786f4ed114
Merge pull request #3344 from jepler/issue-3184
...
Fix RGBMatrix, FrameBufferDisplay bugs
2020-09-02 15:32:30 -07:00
Scott Shawcroft
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci
...
_bleio HCI implementation
2020-09-01 11:28:05 -07:00
Jeff Epler
952d9bbb4a
samd: Ignore a maybe-uninitialized diagnostic in asf4
...
I encountered this when changing optimization flags for debugging
purposes. The diagnostic appears spurious and unrelated to what
I'm debugging.
2020-09-01 10:55:45 -05:00
Jeff Epler
ad4bf75367
samd: only set NDEBUG for non-debug builds
2020-09-01 10:55:45 -05:00
Dan Halbert
4ac7650f22
matrix portal board
2020-08-31 23:56:38 -04:00
Dan Halbert
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
lady ada
81870413af
add default I2C
2020-08-28 19:08:36 -04:00
Lucian Copeland
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
Scott Shawcroft
0cc438e6b9
Fix pycubed pwm use
2020-08-24 18:29:34 -07:00
root
fe0f79adce
Making requested modifications
2020-08-21 20:38:19 -05:00
Scott Shawcroft
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
Dan Halbert
58573a70e1
bring submodules up to date
2020-08-21 11:10:33 -04:00
Dan Halbert
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
Dan Halbert
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
Jeff Epler
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory
...
Update mini sam m4 memory
2020-08-20 19:05:39 -05:00
root
6eae7ce78f
Requested changes to pulsein
2020-08-20 16:57:00 -05:00
Benjamin Shockley
135626a038
Update mpconfigboard.mk
...
Added support for second type of memory chip.
2020-08-20 13:50:52 -05:00
Scott Shawcroft
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
Scott Shawcroft
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors
...
Add usb-endpoint-count checking
2020-08-20 11:21:01 -07:00
Scott Shawcroft
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family
...
SAM E54: Use correct CFG_TUSB_MCU
2020-08-20 11:13:05 -07:00
Jeff Epler
23aefe9509
Add usb-endpoint-count checking
...
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value. Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
2020-08-19 16:47:40 -05:00
Jeff Epler
6ae5bedf3b
SAM E54: Use correct CFG_TUSB_MCU
...
This doesn't actually change the code that is built, but it is
"more correct".
2020-08-19 11:27:52 -05:00
Scott Shawcroft
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
Lucian Copeland
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
Scott Shawcroft
d01f5dc0bd
Turn off terminalio for ja and ko
...
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.
The serial output will work as usual.
2020-08-17 17:17:59 -07:00
Brent Rubell
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x
...
RFM9x -- freeze library into build
2020-08-17 17:11:35 -04:00
Dan Halbert
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50
...
The ja translation was not fitting.
2020-08-17 10:05:25 -04:00
Lucian Copeland
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
Dan Halbert
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size
...
Squeeze firmwares to fit the new ja translation
2020-08-13 12:19:28 -04:00
Jeff Epler
239c8ff87f
metro_m0_express: put back audiobusio
...
this now fits locally (though it's very close to capacity);
let's see what the CI says.
```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
2020-08-12 19:11:33 -05:00
Scott Shawcroft
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2
...
Sharp Memory Display displayio support (v2)
2020-08-12 16:53:09 -07:00
Jeff Epler
aa0b4f7045
cpx_display: Put back AUDIOBUSIO, take away ROTARYIO
...
AUDIOBUSIO is needed for the on-board mic using PDMIn
2020-08-12 16:17:48 -05:00
Jeff Epler
ea8e9b8cef
metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO
...
Dan notes that this is more frequently the solution we've chosen
2020-08-12 16:17:13 -05:00
Jeff Epler
299894025a
stringcar_m0_express: make ja translation fit
2020-08-12 13:47:10 -05:00
Jeff Epler
f08ee0db20
itsybitsy_m0_express: make ja translation fit again
2020-08-12 13:44:00 -05:00
Jeff Epler
7bd42244c9
snekboard: make ja translation fit
2020-08-12 13:34:36 -05:00
Jeff Epler
45f6bc1f3e
serpente: make ja translation fit
2020-08-12 13:32:08 -05:00
Jeff Epler
36bfbaae69
feather_radiofruit_zigbee: make ja translation fit
2020-08-12 13:28:30 -05:00
Jeff Epler
58a1361d3e
Merge remote-tracking branch 'origin/main' into ja-firmware-size
2020-08-12 13:26:12 -05:00
Jeff Epler
813dcd1b73
trinket_m0_haxpress: make ja translation fit
2020-08-12 12:44:17 -05:00
Jeff Epler
88f222f1a1
metro_m0_express: make ja translation fit
2020-08-12 12:38:17 -05:00
Jeff Epler
ba91023fff
itsybitsy_m0_express: make ja translation fit
2020-08-12 12:35:29 -05:00
Jeff Epler
6b9f7c9047
hallowing_m0_express: make ja translation fit
2020-08-12 12:29:30 -05:00
Jeff Epler
58afda342d
feather_m0_supersized: make ja translation fit
2020-08-12 11:53:34 -05:00
Jeff Epler
27c2eb1869
feather_m0_express: make ja translation fit
2020-08-12 11:51:56 -05:00
Jeff Epler
8865e4ca97
circuitplayground_express_displayio: make ja translation fit
2020-08-12 11:46:52 -05:00
Jeff Epler
f3748fe20d
circuitbrains_basic_m0: Use optimization flags to let ja translation fit
2020-08-12 11:46:31 -05:00
Jeff Epler
f9d1d9d114
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 11:15:34 -05:00
Jeff Epler
454e616d13
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 10:46:56 -05:00
bleeptrack
49407b6c06
trailing spaces fix
2020-08-12 13:42:45 +02:00
bleeptrack
e34fac6645
Whitespace and Newline fix
2020-08-11 23:59:32 +02:00
bleeptrack
228d9b5a12
Fixing indentation
2020-08-11 22:18:15 +02:00
bleeptrack
22ae1dbac8
Removing unnecessary pin ignored
2020-08-11 22:17:17 +02:00
bleeptrack
00676ff5a9
PicoPlanet
2020-08-11 21:49:52 +02:00
Jeff Epler
1cf3762392
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-10 12:54:12 -05:00
Jerry Needell
1d980d527e
Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x
2020-08-07 12:48:41 -04:00
Jerry Needell
f7961b96a9
update comment
2020-08-06 10:05:18 -04:00
Jerry Needell
c42ffb8f3d
remove usb_hid
2020-08-06 05:44:26 -04:00
Jerry Needell
432f43a472
freeze rfm9x and BusDevice, remove many built-in modules
2020-08-05 11:37:57 -04:00
root
c7b6e66426
Fixes for pulsein tick handling
2020-08-05 10:03:20 -05:00
Jeff Epler
93b373d617
"pop from empty %q"
...
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
Dan Halbert
ac95106b88
service discovery works; need to work on char and descriptor discovery
2020-08-04 18:24:37 -04:00
Jeff Epler
c849b781c0
Combine 'index out of range' messages
2020-08-04 14:45:45 -05:00
Jeff Epler
dddd25a776
Combine similar strings to reduce size of translations
...
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used. The net savings on trinket_m0 is
just 32 bytes.
It also means that the translation will include the original English
text, and cannot be translated. These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
Jeff Epler
0e2d231445
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-03 21:01:53 -05:00
Dan Halbert
a995a5c58f
wip: partial discovery responses; compiles; not tested
2020-08-03 21:02:57 -04:00
DavePutz
d7eedc5e38
Merge pull request #20 from adafruit/main
...
Update from main
2020-08-03 13:14:01 -05:00
root
9203a77804
Turn off interrupts while in handler
2020-08-03 11:31:12 -05:00
Dan Halbert
0a60aee3e4
wip: compiles
2020-08-02 11:36:38 -04:00
root
12b81618a3
Changes for getting supervisor ticks
2020-08-01 13:27:02 -05:00
Dan Halbert
1771858f4a
add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes
2020-08-01 13:20:46 -04:00
Dan Halbert
4b71831d8b
SUPEROPT_VM = 0 for de_DE
2020-08-01 12:36:20 -04:00
Jeff Epler
27c6ffb9a2
atmel-samd: gemma, trinket: Make space for de_DE translation
2020-07-30 11:29:47 -05:00
Jeff Epler
d69f081c04
Merge remote-tracking branch 'origin/main' into blm_badge
2020-07-30 07:24:48 -05:00
Jeff Epler
af135a7560
atmel-samd: move samd-specific script
2020-07-30 07:18:02 -05:00
Joey Castillo
8acec2ca35
add descriptive pin names
2020-07-29 13:49:08 -04:00
Joey Castillo
ea9bc9b4b6
set screen orientation to portrait
2020-07-29 13:46:10 -04:00
Dan Halbert
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins
...
fluff_m0: add pin aliases
2020-07-28 15:15:15 -04:00
Dan Halbert
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals
...
Use samd peripherals fixed for gcc 10
2020-07-28 15:14:20 -04:00
Scott Shawcroft
b30d89131b
Merge pull request #3215 from ansonhe97/main
...
Added display QSTR to Wio Terminal
2020-07-28 11:53:17 -07:00
Dan Halbert
aa97ea2501
Merge remote-tracking branch 'adafruit/main' into blm_badge
2020-07-28 14:15:02 -04:00
Scott Shawcroft
92216d6417
Use samd peripherals fixed for gcc 10
2020-07-28 11:14:25 -07:00
Dan Halbert
e5e132a364
add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT
2020-07-28 11:49:54 -04:00
ansonhe97
e15bcebb6e
Added display QSTR to Wio Terminal
2020-07-28 17:31:17 +08:00
Jerry Needell
945736e9bb
add adjustments for crickit and displayio variants of CPX
2020-07-27 22:13:04 -04:00
Jerry Needell
2bdd62220e
adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice
2020-07-27 21:50:36 -04:00
Scott Shawcroft
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2
...
ndgGarage ndbit6 v2
2020-07-27 15:51:23 -07:00
Scott Shawcroft
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations
...
More type hints
2020-07-27 14:26:54 -07:00
Taku Fukada
d356581651
Fix several type hints
2020-07-27 18:05:13 +09:00
Radomir Dopieralski
b2c4b0bcfa
fluff_m0: don't exclude portb pins explicitly
2020-07-26 17:26:32 +02:00
Radomir Dopieralski
b1b253c012
fluff_m0: add pin aliases
...
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.
Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
2020-07-26 13:39:42 +02:00
Dan Halbert
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test
...
Changes to allow different compiler optimizations per board
2020-07-25 17:03:10 -04:00
Dan Halbert
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2
...
Add GamePad to Commander board
2020-07-25 16:57:58 -04:00
Chris Burton
c4a5297ee2
Add GamePad to Commander
2020-07-25 17:53:27 +00:00
ikigaisense
6696915801
fix-ndbit6-for-ndbit6_v2
2020-07-25 10:07:33 -06:00
root
c4817968ee
Merge branch 'opt-test' of https://github.com/DavePutz/circuitpython into opt-test
2020-07-24 23:28:41 -05:00
DavePutz
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
root
739981b34e
update for pewpew
2020-07-24 17:27:25 -05:00
DavePutz
a14101cd13
Use current mpconfigboard.mk with optimization change
2020-07-24 14:09:09 -05:00
root
b9cdf195e2
board mk file changes
2020-07-24 10:00:42 -05:00
Taku Fukada
54a342a7f5
Add and correct some type hints
2020-07-24 18:20:03 +09:00
root
c937fa1760
fix formatting
2020-07-23 19:29:57 -05:00
root
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
ikigaisense
703fb9d4a1
update-ndGarage_ndbit6_v2
2020-07-23 16:08:30 -06:00
Scott Shawcroft
2bd6d05663
Add externs. GCC10 complains about duplicate defines
2020-07-22 16:26:46 -07:00
root
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
DavePutz
39e01c3938
Merge pull request #14 from adafruit/main
...
update from main
2020-07-22 11:30:49 -05:00
Scott Shawcroft
8ff2846bb2
Disable countio on circuitbrains basic
2020-07-21 16:21:49 -07:00
Scott Shawcroft
cb7df2e1ed
Merge pull request #3160 from tannewt/enable_pystack
...
Enable PYSTACK to keep function state out of the heap
2020-07-21 13:38:52 -07:00
Scott Shawcroft
5e3a853db4
Turn off GC opt on uchip board
2020-07-21 12:51:59 -07:00
Scott Shawcroft
678faff464
Be more aggressive with uChip build
2020-07-21 11:02:23 -07:00
root
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
Scott Shawcroft
0c6935e336
Merge branch 'main' into disable_network
2020-07-20 16:28:22 -07:00
Scott Shawcroft
12edb57aac
Merge pull request #3166 from theacodes/bhb-adc
...
Add _bhb user module for Big Honking Button
2020-07-20 16:24:36 -07:00
Thea Flowers
7ba89f5330
Add _bhb user module for Big Honking Button
...
BHB needs better accuracy from the ADC readings. To avoid changing the ADC configuration for all boards or adding complexity to AnalogIn, I implemented a custom user module to allow the BHB to talk to the ADC in the way that it needs to. I'm open to other approaches here, but this seemed like the least invasive and complex option.
2020-07-18 22:45:08 -07:00
Radomir Dopieralski
11ef43b071
pewpew_m4: Disable USB_HID back
...
German translation fails to build, so I have to disabled USB_HID after
all.
2020-07-18 20:09:30 +02:00
Radomir Dopieralski
8d692f33a8
pewpew_m4: Enable analogio and usb_hid
...
The newest version for the Stage library for PewPewM4 no longer contains
embedded graphics, which frees enough space in flash to enabled back
AnalogIO and also add USB_HID. There is still ~192 bytes left free.
If new additions to CircuitPython make it grow further, we can disable
USB_HID again.
2020-07-18 19:30:40 +02:00
Scott Shawcroft
610e0171aa
Disable existing native networking.
...
We're moving towards a co-processor model and a Wiznet library is
already available.
New native APIs will replace these for chips with networking like the
ESP32S2 but they won't be these.
2020-07-17 17:43:02 -07:00
Jeff Epler
6912d31560
uchip: reclaim some flash space
2020-07-17 14:32:05 -05:00
Jeff Epler
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
Jeff Epler
6160d11c5a
supervisor: factor out, Handle USB via background callback
2020-07-15 11:49:44 -05:00
Jeff Epler
742aa740f6
samd: audio: Move to background callback
...
Testing performed: Played half of the Bartlebeats album :) :)
2020-07-15 09:26:47 -05:00
Scott Shawcroft
51c888d4be
Merge pull request #3003 from Flameeyes/master
...
License tagging according to REUSE specifications.
2020-07-13 16:28:49 -07:00
Dan Halbert
3fcd999130
Merge pull request #3130 from pewpew-game/brownout-level
...
SAMD: make the brownout detection level configurable per board
2020-07-13 16:26:11 -04:00
Dan Halbert
f6869c69c5
wip: advertising; not tested
2020-07-12 19:45:23 -04:00
Radomir Dopieralski
742f9cfdb0
Fluff M0: additional pins on version 1.3 of the board
2020-07-10 20:40:58 +02:00
Radomir Dopieralski
e0733d153e
SAMD: configurable brownout, separate the variables
2020-07-09 12:17:07 +02:00
Radomir Dopieralski
83a27edd20
SAMD: make the brownout detection level configurable per board
...
Not all boards have external flash or other components that make them
require 2.7V -- sometimes we can get considerably longer battery life
by decreasing this requirement.
In particular, pewpew10 and pewpew_m4 are powered directly from
battery, with no LDO, and should work fine down to 1.6V.
2020-07-08 19:59:53 +02:00
Scott Shawcroft
965a4961ce
Merge pull request #3120 from DavePutz/issue#3049
...
Issue#3049 -PulseIn not working in CP5.4
2020-07-07 08:59:22 -07:00
DavePutz
0932b64ae7
Correct for SAMD51 build
2020-07-06 23:25:33 -05:00
DavePutz
1b3cb17abd
Corrected file for SAMD51 build
2020-07-06 21:47:11 -05:00
DavePutz
ab4a453006
Made requested changes
2020-07-06 21:40:38 -05:00
Scott Shawcroft
846f01b2c8
Merge pull request #3113 from ansonhe97/main
...
ADD: Added Wio Terminal's functional pins and LCD driver to board init
2020-07-06 14:50:47 -07:00
Diego Elio Pettenò
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
Radomir Dopieralski
2f80460a2f
Fluff M0: additional pins on version 1.3 of the board
2020-07-06 19:15:41 +01:00
