djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27,181 Commits 21 Branches 274 Tags 785 MiB
e69397468d
Commit Graph

1944 Commits

Author SHA1 Message Date
Scott Shawcroft
19b0b414e6 Remove freetouch files that were accidentally checked in and 
readd the submodule.
 2018-03-28 14:04:53 -07:00
Jeff Epler
abec199c19 Enable high-quality float hash 
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.

Closes: #704
 2018-03-27 21:56:30 -05:00
Dan Halbert
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis 
Allow building on gcc 5.4, while preserving ability to build with 7.2
 2018-03-27 09:28:41 -04:00
Kattni
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang 
Fix I2C init hang when the SCL pin is pulled low.
 2018-03-26 20:08:14 -04:00
Dan Halbert
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis 
Remove 'O', 'P' support in arrays
 2018-03-26 20:01:34 -04:00
Scott Shawcroft
cebcec5e63 Check for floating pins by pulling them low briefly before testing their values. 2018-03-26 16:32:16 -07:00
Jeff Epler
355bf8b553 Conditionally compile out nonstandard array/struct typecodes 
.. defaulting to off for circuitpython-supported boards, on for others.

.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
 2018-03-26 18:13:49 -05:00
Scott Shawcroft
25ba8ee489 Add an s because grammar. 2018-03-26 15:21:08 -07:00
Scott Shawcroft
37538fc0e7 Fix I2C init hang when the SCL pin is pulled low. 
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
 2018-03-26 15:13:52 -07:00
Scott Shawcroft
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix 
Fix 128 Character Max Paste Into REPL
 2018-03-26 13:02:43 -07:00
sommersoft
9bd55cf4c7
minor cleanup 2018-03-26 08:14:37 -05:00
sommersoft
23009fdd63 future-proof for buffer size changes 2018-03-26 06:25:04 +00:00
Dan Halbert
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis 
correct typo in filename
 2018-03-25 23:58:00 -04:00
Jeff Epler
d57397f9c8 Remove an unneeded -Wno-error=lto-type-mismtach 2018-03-25 22:04:15 -05:00
Jeff Epler
c0029e1d97 Don't lose half of the processor's serial number 
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
 2018-03-25 13:01:04 -05:00
Dan Halbert
31f5b6a238 WIP: simple working HID 2018-03-24 18:29:12 -04:00
Jeff Epler
d80e54458d correct typo in filename 2018-03-24 10:44:24 -05:00
sommersoft
6205ed9a0c updated cdc_enabled; now more dynamic status return 2018-03-24 03:42:58 +00:00
sommersoft
ef16109c5d updated with requested changes 2018-03-24 00:55:48 +00:00
sommersoft
f237657e5e extended buffer check to usb_cdc_background 2018-03-23 18:41:27 +00:00
Scott Shawcroft
63d826a52a
Update USB PID 2018-03-23 09:34:02 -07:00
sommersoft
ccbe557e30 removed leftover debugging bits 2018-03-23 15:45:30 +00:00
sommersoft
d434635822 add buffer check before triggering new usb read 2018-03-23 15:07:02 +00:00
Scott Shawcroft
fd7dcff4e9 Add Feather M4 Express support. 
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
 2018-03-23 00:00:13 -07:00
Scott Shawcroft
06b4c83f59 Add reminder to remove Saleae when going fast. 2018-03-22 17:44:44 -07:00
Scott Shawcroft
3bf4d69f67 Update Metro M4 to rev F and make flash reset on start. 2018-03-22 16:42:47 -07:00
Jeff Epler
a7e3c74fed Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive 
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.

It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.

These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.

Closes: #689
 2018-03-22 08:07:32 -05:00
Scott Shawcroft
9ab39eb2d2
Merge pull request #688 from jepler/atsamd-build-reqs 
Better document build requirements and steps
 2018-03-20 10:03:01 -07:00
Scott Shawcroft
0f90f35606
Merge pull request #685 from jepler/uart-diagnostic 
UART: Fix maybe-uninitialized diagnostic
 2018-03-20 09:59:31 -07:00
Jeff Epler
3f82fe8da9 README.rst: document mpy-cross gotcha 
This was biting me, leading to an odd error later on.
 2018-03-20 07:53:30 -05:00
Jeff Epler
fa491b4c32 README.rst: spell out gcc version requirements 
.. the text was adapted from ports/stm32 and a conversation with
Dan Halbert.
 2018-03-20 07:53:30 -05:00
Jeff Epler
dddfad6594 UART: Fix maybe-uninitialized diagnostic 
The following error occurs when building with gcc 5.4.1 (debian stretch):

common-hal/busio/UART.c:104:83: error: 'sercom_index' may be used uninitialized in this function [-Werror=maybe-uninitialized]
                   sercom_insts[rx->sercom[j].index]->USART.CTRLA.bit.ENABLE == 0) ||

It may be related to the addition of rx-only UARTs; gcc is unable
to infer the intended relationship between have_tx and sercom_index
being set (I am still not entirely confident of it myself)
 2018-03-19 20:40:04 -05:00
Kattni
05e2a7d1ac Added digital pin assignments 2018-03-15 20:28:09 -04:00
jerryneedell
04b4026666
fix dotstar for Gemma_M0 in CP3.0 
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access.  same issue as #514 for trinket_m0
 2018-03-14 21:28:56 -04:00
Dan Halbert
f173d45941
Merge pull request #678 from tannewt/m0_no_timer_fix 
Correct NO_TIMER index value for SAMD21.
 2018-03-14 15:04:39 -04:00
Scott Shawcroft
88aa0e2660 Remove SERCOM pointers from pin data structure because index is 
enough.

This saves 380 bytes on the Arduino Zero build. (More pins ==
more savings.)
 2018-03-14 11:14:32 -07:00
Scott Shawcroft
7a3f86d184 Check usb_busy up front in usb background function. 
Waiting to do so risks accidentally queueing another response.

Hopefully fixes #655 but we'll let @jerryneedell confirm.
 2018-03-14 10:32:41 -07:00
Scott Shawcroft
c37ade9aeb Correct NO_TIMER index value for SAMD21. 
We check validity by ensuring it's lower than the total number of
timers. 0 is a terrible number for the NO_TIMER value because its
valid even though it shouldn't be.

Fixes https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO/issues/29
 2018-03-13 12:44:00 -07:00
Dan Halbert
b64d568267
Merge pull request #677 from tannewt/usb_active_read 
Move usb read finish into interrupt.
 2018-03-13 15:16:40 -04:00
Scott Shawcroft
8157248189 Move usb read finish into interrupt. 
Having the `active_read = false` in the background function left
a chance that a new_write occurs before active_read is set to false.

In that case, we'll read the appropriate data rather than write it
and never clear the active write.

Hopefully fixes #655.
 2018-03-13 11:29:29 -07:00
vesperk38
945f2f5aa1
line 172 has a typo correct 2MB to 4MB 2018-03-13 13:42:29 -04:00
Radomir Dopieralski
81ab2526e4 gamepad: Enable the gamepad module for express boards in 3.x 2018-03-11 13:39:54 +01:00
Scott Shawcroft
e7fc0b6aa7 Use DMA for long SPI transactions including those to the SPI Flash. 
QSPI is not currently working so its commented out.

This is progress on #652.
 2018-03-09 12:45:46 -08:00
Bryan Siepert
942b7ffbe0 fixes hardware dotstar support for 3.0 and addresses issue #514 2018-03-08 20:39:47 -08:00
sommersoft
c1c3a79ec4 atmel-samd: changed Status to Runtime; instituted runtime singleton 2018-03-09 02:19:51 +00:00
Scott Shawcroft
01aceaae50 Support all boards and remove erase and page sizes because they never change. 2018-03-01 12:45:12 -08:00
Scott Shawcroft
2ab923862b Structify flash device definitions. 2018-02-28 19:15:54 -08:00
Dan Halbert
568c04e6af
Merge pull request #650 from tannewt/merge_2x 
Merge in commits from 2.x branch.
 2018-02-27 22:03:52 -05:00
Scott Shawcroft
bf05183158 Merge remote-tracking branch 'adafruit/2.x' into merge_2x 2018-02-27 15:24:16 -08:00
Dan Halbert
5c24023240 use CONF_GCLK_DAC_SRC and refactor a bit 2018-02-27 17:21:03 -05:00
Dan Halbert
4895a9d1d8 Use safe clock freqs for AnalogOut; use DAC REFRESH on SAMD51. 2018-02-27 15:44:27 -05:00
Bryan Siepert
e42209a6b2 fixes timer number assumptions for samd51s for issue #646 2018-02-27 00:42:40 -08:00
Dan Halbert
cc7acfd491 consistently brand Itsy Bitsy M0 as 'Express' 2018-02-26 17:37:03 -05:00
Dan Halbert
957a82b592 add board.RX and .TX pins to metro_m4_express_revb 2018-02-23 09:54:39 -05:00
Kattni
7399a1a5c7
Merge pull request #634 from dhalbert/3.0_UART 
Implement UART for 3.0 + related fixes.
 2018-02-21 23:07:27 -05:00
Dan Halbert
9b4477e1dc Implement UART for 3.0 + related fixes. 
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.

2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
  a. async USART driver
  b. bringing Atmel START configuration closer to what we use
  c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
 2018-02-21 17:18:49 -05:00
James Devine
9c5a9e3411
Update boards URL in README.rst 
Corrected a (probably) old URL in the read me.
 2018-02-21 16:14:46 +00:00
Scott Shawcroft
d02251f8cd Add a new board for Metro M4 Express Rev B. This is the board 
send to community members for testing.

Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
 2018-02-20 12:34:07 -08:00
Scott Shawcroft
653fc8877d Remove breakpoint instruction used for debugging. 2018-02-19 21:38:14 -08:00
sommersoft
60d6ccc731 changed spaced supervisor/Status.c line to tabbed 2018-02-20 03:44:45 +00:00
Scott Shawcroft
15f626be58 m4 qspi works. m0 compiles 2018-02-19 14:02:04 -08:00
Scott Shawcroft
f20d5723aa Reorganize things. Reading jdec works. 2018-02-19 14:02:04 -08:00
Scott Shawcroft
4710a2adba Compiles for m4. Untested on m0. 
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
 2018-02-19 14:02:04 -08:00
Scott Shawcroft
a2bd772d5c Begin rework to add qspi support. 2018-02-19 14:02:04 -08:00
sommersoft
9ee4d13756 added Status submodule to ports/atmel-samd/common-hal/supervisor; issue #544 2018-02-19 20:49:18 +00:00
Scott Shawcroft
a2b18b75d4 Fix loops and comma style. 2018-02-16 10:05:28 -08:00
Scott Shawcroft
eb2b41810a Turn on lto 2018-02-15 16:12:58 -08:00
Scott Shawcroft
538081528d pulsein works on m0 2018-02-15 16:04:39 -08:00
Scott Shawcroft
fcde138ea3 pulsein works on m4 2018-02-15 15:12:58 -08:00
Scott Shawcroft
07230f2637 pulsein compiles but doesn't work 2018-02-14 16:59:04 -08:00
Scott Shawcroft
c7af17525b m4 pulseout works 2018-02-14 11:38:52 -08:00
Scott Shawcroft
6a7d889dd4 m0 pulseout works. Factored out shared timer code. 2018-02-13 18:17:20 -08:00
Scott Shawcroft
8479eef578 m0 tc and tcc work 2018-02-13 16:44:04 -08:00
Scott Shawcroft
6c3075bec6 m4 tc and tcc works. multi-tcc channels ok too. 2018-02-13 14:22:55 -08:00
Scott Shawcroft
cc616aea4e m4 tc output works. Watch out for the PAC! 2018-02-12 23:41:26 -08:00
Scott Shawcroft
0397202288 m4 compiles, pwmout implemented but TC0 (A1) doesn't run 2018-02-09 17:21:06 -08:00
Scott Shawcroft
0398f308fa m4 compiles, pwmout implemented 2018-02-09 16:37:27 -08:00
Scott Shawcroft
190e7d629e WIP 2018-02-09 16:37:27 -08:00
Dan Halbert
b001c0711b Correct _etext location; clean up .ld files 
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
 2018-02-09 11:31:18 -05:00
Dan Halbert
6be6df6ae4
Merge pull request #609 from tannewt/bitbangio 
Enable bitbangio now that we have digitalio.
 2018-02-08 21:24:32 -05:00
Scott Shawcroft
3e63f59867 Use write instead of set because it clears the bits before setting them. 2018-02-08 16:12:33 -08:00
Scott Shawcroft
aeae0090af Enable bitbangio now that we have digitalio. 
Also remove a rogue neopixel_write.
 2018-02-08 16:03:05 -08:00
Scott Shawcroft
82bc11585e ports/atmel-samd: Re-enable analogio 
This introduces SAMD51 support and re-enables SAMD21 support.

Fixes #263
 2018-02-08 14:48:08 -08:00
Bryan Siepert
dfc2b82ede Added SAMD51G support as per issue #597 2018-02-07 21:23:25 -08:00
Dan Halbert
eb49359aec CPX: typo in mpconfigboard.h broke CIRCUITPY 2018-01-30 15:48:22 -05:00
Dan Halbert
e550b024c5 atmel-samd: Correct computation of SPI baud rate. 
all: Add .frequency read-only property for busio.SPI to return actual frequency.

Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
 2018-01-30 12:08:41 -05:00
Dan Halbert
a1e279a9d8
Merge pull request #556 from python-ugame/ugame10-3.0 
Update ugame port for the final ugame10 version
 2018-01-29 13:35:06 -08:00
Radomir Dopieralski
d595a03bbd Update ugame port for the final ugame10 version 
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
 2018-01-29 22:19:09 +01:00
Radomir Dopieralski
189c62ac7d Bring back the _stage library 
I have tested the _stage module, and it works fine, so I'm including it
in he sources again. It's still disabled by default in the
mpconfigport.h.
 2018-01-29 21:24:46 +01:00
Dan Halbert
efbf08266b make _estack be double-word aligned 2018-01-24 19:24:36 -05:00
Scott Shawcroft
6560596864 Switch to m_malloc_maybe and m_free to reduce our dependence on gc_alloc. 
gc_alloc's API is changing and we shouldn't need to care about it.
So, we switch to m_malloc which has the default behavior we expect.
 2018-01-23 16:45:07 -08:00
brentrubell
ab1f133667 issue #536 CPX change SPI pin designations to externally available pins (#540) 
* issue #536 CPX

* switched pin assignment
 2018-01-22 19:31:55 -08:00
Tony DiCola
4bd1d09d74 Add missing Feather M0 RadioFruit boards: RFM69, RFM9x (#539) 2018-01-19 11:53:47 -08:00
sommersoft
44bc1711aa Added Unique ID Functions/Updated Support Matrix (#527) 
shared_bindings/index.rst: updated Support Matrix format as discussed in PR #503 & Issue #448.

shared-bindings/microcontroller/Processor.c & .h: added UID lookup functionality for use with all ports. Fixes #462.
 2018-01-18 11:39:11 -08:00
Dan Halbert
01443a9619 Make chosen features consistent across all boards and ports atmel-samd, esp8266, and nrf. 
1. Turn off MICROPY_CPYTHON_COMPAT, which includes a number of minor CPython compatibility features,
most of which have workarounds, but uses up significant flash.
2. Turn on MICROPY_PY_SYS_MAXSIZE, which implements sys.maxsize.
3. Turn on MICROPY_CAN_OVERRIDE_BUILTINS, which implements "_" as the most recent value in the REPL,
and also enables redefining builtins.
 2018-01-16 18:11:54 -08:00
Dan Halbert
2d5483082d Checked wrong RCAUSE bit for system_reset 2018-01-08 15:45:07 -08:00
Dan Halbert
1805bcac76 enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge) (#513) 
enable use of CIRCUITPY_CANARY_WORD (needed for 2.2 merge)

RCAUSE (reset cause) is fetched differently in SAMD21 vs SAMD51
 2018-01-08 09:44:06 -08:00
Dan Halbert
d0cc8abd31 revise boards/ files for 3.0. All now compiled (but I don't have all to test). 2018-01-04 14:16:53 -05:00
Dan Halbert
d8686cc002 use correct LD_FILE in mpconfigboard.mk for boards with external flash 2018-01-03 16:49:38 -05:00
Dan Halbert
065e82015f merge from 2.2.0 + fix up board defs 2018-01-02 21:25:41 -05:00
Dan Halbert
ce81c8dda9 Avoid gcc 7.2.1 compiler issues in nlr_push() (#506) 
Avoid gcc 7.2.1 compiler issues in nlr_push()
 2018-01-02 13:41:34 -08:00
Dan Halbert
72c911be97 Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now. 2017-11-27 21:00:24 -05:00
Stewart
fb1dcd326d ports/atmel-samd: feather_m0_adalogger readme updates (#460) 
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
- Added Setup information regarding arm complier packages
- README - Updated to reflect that feather_m0_adalogger microSD is supported
 2017-11-26 21:10:01 -08:00
Stewart Colborne
5eb7958425 ports/atmel-samd/boards/feather_m0_adalogger/pins: Added missing pins 
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
 2017-11-25 22:00:32 -08:00
mrmcwethy
e0eae5cb2a Enable the Neopixel status light on Metro M0 Express and Feather M0 Express boards 2017-11-21 14:39:56 -08:00
Dan Halbert
6f662e9bbc samd51 peripheral clocks were defined as 12MHz, but were really 120MHz 2017-11-20 21:11:30 -08:00
Dan Halbert
a9f75a71c5
Merge pull request #443 from dhalbert/3.0_spi 
non-DMA SPI working; adding this now for testing; will continue with DMA
 2017-11-16 19:28:24 -05:00
Dan Halbert
312444bbd2 non-DMA SPI working; adding this now for testing; will continue with DMA 
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5

Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
 2017-11-16 19:09:35 -05:00
Scott Shawcroft
ecc47d5258 Create supervisor module. 
It can control autoreload and the rgb status led.
 2017-11-16 09:04:17 -08:00
Scott Shawcroft
ef9a7f262a atmel-samd: Turn off nvmctl cache and rework active_read. 2017-11-08 16:01:38 -08:00
Scott Shawcroft
971bd7e9a6 atmel-samd: Improve MSC reliability. 
* Be more liberal with critical sections to ensure ordering.
* Correct usb_busy so that it is busy when no errors occur on
  transfer. I believe it worked before because it would be false
  momentarily until a second transfer was attempted and a busy
  error was returned, therefore setting usb_busy to true. That
  risks the first "failed" transfer completing before a second one
  is attempted.
 2017-11-08 12:42:50 -08:00
Scott Shawcroft
7a901cfccd atmel-samd: Align SCSI responses. 2017-11-08 10:47:22 -08:00
Scott Shawcroft
3cb5e7ea58 atmel-samd: Update Feather M0 Express USB PID 
This makes it different from the bootloaders and Arduino.
 2017-11-07 14:26:37 -08:00
Dan Halbert
9060df5af6 DigitalInOut: Use pin value % 32 to accomodate PORTB and up. 
Fixes #407.
 2017-11-07 10:08:34 -08:00
Dan Halbert
7292984204 Implement busio.I2c. 
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
  functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.

simpler reset of SERCOMs; remove unused routine
 2017-11-07 09:59:54 -08:00
Scott Shawcroft
182a946b0e atmel-samd: Tweak mass storage code to finish read sooner. 2017-11-06 16:30:11 -08:00
Scott Shawcroft
a8ee0012d7 atmel-samd: Enable -Os for SAMD51 and update neopixel accordingly. 2017-11-06 16:30:11 -08:00
Scott Shawcroft
4140b3b944 atmel-samd: Stop double CSW after MSC reads 
This explicit zero length xfer leads to a second CSW packet. If
another read was started between the two CSWs then the host gets
confused and resets the device.

On reads, the CSW is automatically sent when we reply with the
total length. Writes must do it manually so they can wait for the
disk to flush the data.
 2017-11-03 15:08:55 -07:00
Scott Shawcroft
c90a2d9b42 atmel-samd: Fix SAMD51 SWCLK reset so we can connect the JLink 
while CircuitPython is running.
 2017-11-02 14:00:38 -07:00
Scott Shawcroft
a49200d5cb tools: Switch to using separate usb_descriptor repo. 2017-11-02 13:00:50 -07:00
Scott Shawcroft
3cfb06042e atmel-samd: update to October 2017 ASF4. 2017-11-02 12:19:50 -07:00
Scott Shawcroft
a8dae22ae9 atmel-samd: Fix the neopixel delay method so it handles overflow better. 2017-11-01 11:56:54 -07:00
Dan Halbert
3b17980822
Merge pull request #391 from tannewt/longint_usb_fix 
Enable LONGINT on M4 + usb fix
 2017-11-01 14:19:17 -04:00
Scott Shawcroft
cfbb74ffe7 atmel-samd: Reorder mpconfigport.mk and mpconfigboard.mk includes. 
This allows mpconfigport.mk to set this conditionally based on
$(CHIP_FAMILY).
 2017-11-01 11:01:34 -07:00
Dan Halbert
0076a3c868
Merge pull request #393 from tannewt/m4_neopixel 
Now with more blinky!!!
 2017-11-01 08:17:41 -04:00
Scott Shawcroft
f4c8256345 atmel-samd: Add TX/RX led support for Metro M4. 2017-10-31 22:39:16 -07:00
Scott Shawcroft
54f2b698ce atmel-samd: remove infinite loop if USB MSC read fails. 2017-10-31 22:38:52 -07:00
Scott Shawcroft
3177e10e9e atmel-samd: Add samd21 neopixel support. 
Also, fix and enable the status neopixel.

Fixes #264
 2017-10-31 22:38:09 -07:00
Tony DiCola
d023879bea atmel-samd: Update and enable neopixel_write for ASF4, tested on SAMD21 only. 2017-10-31 16:06:36 -07:00
Scott Shawcroft
15dcc7011c atmel-samd: Turn on slice assignment in all builds. 
This costs 376 bytes on a Trinket M0 leaving 33412 bytes free.

Fixes #193
 2017-10-31 15:57:56 -07:00
Scott Shawcroft
9db321d505 atmel-samd: Enable longints for M4 builds. 
Fixes #110
 2017-10-31 15:46:42 -07:00
Scott Shawcroft
268bf6f99e atmel-samd: Fix non-DEBUG USB cdc. 
I believe the issue was that LTO exacerbates a problem where a CDC
read is initiated but fails and leaves pending_read true
preventing further reads.
 2017-10-31 15:43:45 -07:00
Radomir Dopieralski
8c7571a75d Create the build directory before running gen_usb_descriptor 
Otherwise it fails to create the file in that directory.
 2017-10-31 13:35:22 -07:00
Scott Shawcroft
4aeef100f6 atmel-samd: More USB polish 
* Introduce a python script to generate the USB descriptor instead of
  a bunch of C macros. In the future, we can use this dynamically in
  CircuitPython.
* Add support for detecting read-only mass storage mounts.

Fixes #377
 2017-10-30 18:29:20 -07:00
Dan Halbert
8e45dc041f Read serial input as a background task so we can check for the interrupt character. 2017-10-27 17:32:13 -04:00
Dan Halbert
10b3a90189 Check INTERNAL_LIBM make flag in a safer way. 2017-10-27 17:32:13 -04:00
Dan Halbert
7f88ba3b26 Revert "Allow main.py to be interrupted by ctrl-C" (#381) 
* Revert "Read serial input as a background task so we can check for the interrupt character."

This reverts commit 046092e8a2.

* Revert "Check INTERNAL_LIBM make flag in a safer way."

This reverts commit 2b80add22f.
 2017-10-27 17:32:13 -04:00
Dan Halbert
2487226dff Read serial input as a background task so we can check for the interrupt character. 2017-10-27 17:32:13 -04:00
Dan Halbert
f0a12d9620 Check INTERNAL_LIBM make flag in a safer way. 2017-10-27 17:32:13 -04:00
Dan Halbert
4232a0a196 Sync with https://github.com/adafruit/asf4/pull/3 2017-10-26 09:30:59 -04:00
Scott Shawcroft
ee18b5cbab Don't use ERR_ABORTED. (#375) 2017-10-26 09:08:29 -04:00
Scott Shawcroft
d613776f0d atmel-samd: Add support for ERR_ABORTED to indicate medium not present. 2017-10-25 21:02:01 -04:00
Scott Shawcroft
ab7da9353a atmel-samd: Stop hanging on usb write when a terminal isn't connected by checking DTR status. 2017-10-25 21:02:01 -04:00
Scott Shawcroft
73c15dcf8b Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge 
This is prep for merging in the NRF5 pull request.
 2017-10-24 22:31:16 -07:00