36da92075b
Update safe mode reason
2020-09-13 22:57:24 +05:30
5deac8d249
Update board specific safe mode message
2020-09-13 18:22:40 +05:30
2fac4851a5
fix typo, tested hardware, neopixel doesnt work tho
2020-09-12 19:56:13 -04:00
6fff4ec00d
cutie variant
2020-09-12 19:00:26 -04:00
01fdd9598a
disable iimplicit-fallthrough warning inside asf4
...
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes) I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
2020-09-12 17:48:42 -05:00
5729097bc4
atmel-samd: enable build error for implicit fallthrough
...
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate. I only tested a few builds (trinket m0
and metro m4 express)
2020-09-12 15:11:29 -05:00
4da478382d
Fix serial console output & add more boards
2020-09-12 17:46:52 +05:30
305bed6d9e
Added esp32s2 safe_mode & fixed user_safe_mode
2020-09-11 21:06:54 +05:30
cacb0124ac
feather_m4_express: Use quad data mode on flash
...
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.
Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
c7c90f47b0
Add non-DMA SPI support.
...
This fixes SPI with PSRAM allocated buffers. DMA with SPI2 was
attempted but produced junk output. This manual copy is less than
2x slower than DMA when not interrupted.
Fixes #3339
2020-09-10 17:32:20 -07:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
e5dd2a32f4
Merge pull request #3388 from jerryneedell/jerryn_rfm69
...
freeze rfm69 and bus_device libraries into feather_m0_rfm69
2020-09-10 11:49:37 -07:00
683462c1b1
Merge pull request #3326 from tannewt/native_wifi
...
Add native wifi API with ESP32S2 support
2020-09-10 11:20:44 -07:00
2529ee2359
freeze rfm69 and bus_device libraries int feather_m0_rfm69
2020-09-09 14:54:20 -04:00
be199983c1
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-09 13:24:30 -04:00
99f5011d74
Fix heap without PSRAM. Never set heap_size.
2020-09-08 17:06:09 -07:00
b49099c8f3
additional asf4 updates
2020-09-08 15:31:13 -05:00
e066448e36
atmel-samd: add same51, feather_m4_can
...
This is compile-tested, and requires updates in the related submodules:
https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37
This should not be merged until those can also be merged.
2020-09-08 13:06:45 -05:00
14af8e4b42
Added temp_sensor_stop
...
Co-authored-by: hierophect <hierophect@gmail.com>
2020-09-08 21:07:00 +05:30
c68723db3c
Update Processor.c
2020-09-08 15:13:48 +05:30
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
ed6cc64c49
Corrected issue with BLE not working on nrf52840
2020-09-04 16:59:41 -05:00
42df254683
Merge pull request #3373 from dhalbert/trellis-m4-board-i2c
...
fix pins for trellis_m4 board.I2C()
2020-09-04 11:15:18 -04:00
96cf60fbbd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-09-03 16:34:56 -07:00
0b94638aeb
Changes based on Dan's feedback
2020-09-03 16:32:12 -07:00
960888a3bd
fix pins for trellis_m4 board.I2C()
2020-09-03 14:22:18 -04:00
786f4ed114
Merge pull request #3344 from jepler/issue-3184
...
Fix RGBMatrix, FrameBufferDisplay bugs
2020-09-02 15:32:30 -07:00
4733a67226
Add GDB debugging capability
2020-09-02 11:27:42 -04:00
f0e60da51f
Merge pull request #3310 from dhalbert/ble_hci
...
_bleio HCI implementation
2020-09-01 11:28:05 -07:00
952d9bbb4a
samd: Ignore a maybe-uninitialized diagnostic in asf4
...
I encountered this when changing optimization flags for debugging
purposes. The diagnostic appears spurious and unrelated to what
I'm debugging.
2020-09-01 10:55:45 -05:00
ad4bf75367
samd: only set NDEBUG for non-debug builds
2020-09-01 10:55:45 -05:00
4ac7650f22
matrix portal board
2020-08-31 23:56:38 -04:00
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
0adccc50dc
Merge pull request #3346 from tannewt/add_kaluga
...
Add Kaluga board definition
2020-08-29 21:05:20 -04:00
7b59ede25e
Add remaining pins
2020-08-28 18:22:22 -07:00
0bb5c6c07f
Add unique USB PID
2020-08-28 16:37:25 -07:00
81870413af
add default I2C
2020-08-28 19:08:36 -04:00
a09243472c
Add Kaluga board definition
2020-08-28 16:08:24 -07:00
893a125dd0
Merge pull request #3338 from jepler/endpoint-count-checking-stm32f405
...
add endpoint count checking on stm32f405
2020-08-28 11:12:31 -04:00
ac06202c21
Merge pull request #3238 from ElectronicCats/bastwifi
...
Add Bastwifi by Electronic Cats
2020-08-28 11:03:52 -04:00
5d8ac0428b
-Os espruino_pico to save space
2020-08-27 13:34:37 -07:00
563e038c0d
stm: Specify max endpoints for stm32f405xx
...
.. which is why we can't have HID or MIDI on the stm32f405 feather
2020-08-27 15:11:17 -05:00
2b71635c49
Fix esp-idf requirements
2020-08-27 11:45:51 -07:00
fd6e63d806
Hopefully final partition scheme.
2020-08-27 11:43:06 -07:00
767ca5c3dc
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-27 11:42:31 -07:00
49a22b0c55
Merge pull request #3320 from hierophect/stm32-meowbit-fix
...
STM32: Fix Meowbit startup and associated bugs
2020-08-27 13:05:56 -05:00
24fb08dbd9
Merge pull request #3337 from hierophect/pulseout-errorstyle
...
Fix problematic whitespace on pulseout parameter errors
2020-08-27 13:22:26 -04:00
350e88d4b9
Merge pull request #3324 from hierophect/esp32-random
...
Add random to ESP32-S2, fix it on STM32
2020-08-27 13:22:05 -04:00
6100027243
Merge pull request #3315 from tannewt/add_psram
...
Add PSRAM support to ESP32S2
2020-08-27 11:58:59 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
772052598d
Merge branch 'main' into stm32-meowbit-fix
2020-08-27 11:00:29 -04:00
a15f948a40
Merge branch 'main' into esp32-random
2020-08-27 10:49:14 -04:00
fe73cfb922
Merge pull request #3333 from hierophect/esp32-enable-ulab
...
Fix all assignments affected by inline makefile comments
2020-08-27 10:36:59 -04:00
8d2299e61e
Merge remote-tracking branch 'upstream/main' into stm32-meowbit-fix
2020-08-26 18:50:26 -04:00
c229345741
improve efficiency of stm32 random gen
2020-08-26 18:47:19 -04:00
553ac576eb
Disable ulab
2020-08-26 17:48:29 -04:00
c77523503b
Fix trailing whitespace errors across ports and docs
2020-08-26 14:48:46 -04:00
44342732a4
Fix DOS line endings, they give my git fits
2020-08-26 10:56:00 -05:00
5755160720
Merge pull request #3322 from microDev1/microS2
...
Added board - microS2
2020-08-26 11:03:46 -04:00
f26d15c5c9
Added PSRAM support
2020-08-26 18:39:30 +05:30
01ddb177fc
Remove whitespace in sdkconfig
2020-08-26 09:07:54 -04:00
f7d224705f
Trim trailing whitespace in pins.c
2020-08-26 09:01:27 -04:00
0425305a73
Change microS2 board name
2020-08-26 08:40:46 +05:30
b019ef2e43
Change microS2 board name
2020-08-26 08:38:42 +05:30
f1f316c502
Change microS2 board name
2020-08-26 08:37:36 +05:30
3f699024d9
Change microS2 board name
2020-08-26 08:36:38 +05:30
1dce6bd7ca
Change microS2 board name
2020-08-26 08:35:09 +05:30
bf2b594066
Change microS2 board name
2020-08-26 08:33:21 +05:30
8b71e26abd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-25 16:39:23 -07:00
380cbfba55
Add hash to Socket so it can be used in dicts
2020-08-25 16:15:45 -07:00
69fc872944
Fix espidf.MemoryError print
2020-08-25 16:14:31 -07:00
f71f6631cc
Enable ulab
2020-08-25 14:24:35 -04:00
05bde255f7
Add random to ESP32-S2, fix it on STM32
2020-08-25 14:00:29 -04:00
89c6a44e4e
Added microS2 specific config files
2020-08-25 20:35:08 +05:30
645adaadb0
Added microS2 specific config files
2020-08-25 20:32:44 +05:30
de9fd4a0fb
Fix null dereference, invert auto_brightness to reenable screen
2020-08-25 10:37:55 -04:00
0cc438e6b9
Fix pycubed pwm use
2020-08-24 18:29:34 -07:00
1527a3ce92
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-24 18:25:18 -07:00
c137a16121
Remove Meowbit LSE flag, harsher failure for LSE issues
2020-08-24 14:49:06 -04:00
3eea3b5311
Added microS2 specific config files
2020-08-24 11:12:35 +05:30
fe0f79adce
Making requested modifications
2020-08-21 20:38:19 -05:00
f39708abb2
Add PSRAM support to ESP32S2
...
When configured the CircuitPython heap will be on the external RAM.
When not available, the heap will be 48k inside the IDF heap.
2020-08-21 16:20:58 -07:00
da61845f56
Add missing include
2020-08-21 13:32:59 -07:00
644d2ba7a2
Add more "extern" declarations for gcc10 compat
...
gcc has tightened the restrictions on forward declarations that lack
"extern". Fix them up.
2020-08-21 14:39:37 -05:00
83deea0e03
Fix copy pasta and stub build
2020-08-21 11:17:42 -07:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
701e80a025
Make socket reads interruptable
2020-08-21 11:00:02 -07:00
58573a70e1
bring submodules up to date
2020-08-21 11:10:33 -04:00
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
ba2db853a4
Merge pull request #3308 from bwshockley/update_Mini_sam_m4_memory
...
Update mini sam m4 memory
2020-08-20 19:05:39 -05:00
6eae7ce78f
Requested changes to pulsein
2020-08-20 16:57:00 -05:00
135626a038
Update mpconfigboard.mk
...
Added support for second type of memory chip.
2020-08-20 13:50:52 -05:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
e47447ba59
Merge pull request #3306 from kamtom480/usb_fix
...
spresense: call usb_background function
2020-08-20 11:23:16 -07:00
31a3d0e815
Merge pull request #3304 from jepler/count-usb-descriptors
...
Add usb-endpoint-count checking
2020-08-20 11:21:01 -07:00
a86d6aeac4
Merge pull request #3303 from jepler/samd-tinyusb-family
...
SAM E54: Use correct CFG_TUSB_MCU
2020-08-20 11:13:05 -07:00
e2891bc7d4
spresense: call usb_background function
2020-08-20 16:21:25 +02:00
80b15f6b3b
Add error handling w/temp debug logs
2020-08-19 17:51:33 -07:00
23aefe9509
Add usb-endpoint-count checking
...
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value. Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
2020-08-19 16:47:40 -05:00
eb8b42aff1
Add basic error handling
2020-08-19 14:23:28 -07:00
9602ee6265
Disable wifi debug logging and memory log
2020-08-19 14:23:28 -07:00
dcc42f6281
Remove debug prints
2020-08-19 14:23:28 -07:00
1034cc1217
Add espidf module.
2020-08-19 14:23:28 -07:00
b3a449c276
Turn on json and enable socket.close
2020-08-19 14:23:28 -07:00
430530c74b
SSL works until it runs out of memory
2020-08-19 14:23:28 -07:00
eb2c38825e
HTTP works with my adafruit_requests
2020-08-19 14:23:18 -07:00
c9ece21c28
SocketPool stubbed out
2020-08-19 14:22:13 -07:00
7bdd243bf6
Ping works!
2020-08-19 14:22:13 -07:00
3860991111
Ping work and start to add socketpool
2020-08-19 14:22:13 -07:00
cdab5e793e
Update to latest idf
2020-08-19 14:22:13 -07:00
c62ab6e09a
Add ipaddress
2020-08-19 14:22:12 -07:00
ddcff85fa2
Add debugging. Scanning doesn't crash but returns no results. Need to config station.
2020-08-19 14:22:12 -07:00
1a6f4e0fe0
Scanning WIP. Need to sort out supervisor memory
2020-08-19 14:22:12 -07:00
c5b8401a15
First crack at native wifi API
2020-08-19 14:21:59 -07:00
6ae5bedf3b
SAM E54: Use correct CFG_TUSB_MCU
...
This doesn't actually change the code that is built, but it is
"more correct".
2020-08-19 11:27:52 -05:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
8e77981ad5
Merge pull request #3297 from simmel-project/i2c
...
Update Simmel board definition to reflect DVT hardware
2020-08-18 12:55:45 -07:00
dd425ee6c5
Remove breaking parenthesis
2020-08-18 15:54:50 -04:00
24ca5c0218
Merge pull request #3295 from tannewt/turn_off_terminalio
...
Turn off terminalio for ja and ko
2020-08-18 12:10:31 -07:00
771388cde2
Remove trailing space.
2020-08-18 11:44:31 -07:00
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
211c134950
add I2C, remove unused pins
2020-08-18 19:02:23 +08:00
a4508f846d
stash config
2020-08-18 18:16:49 +08:00
d01f5dc0bd
Turn off terminalio for ja and ko
...
The font is missing many characters and the build needs the space.
We can optimize font storage when we get a good font.
The serial output will work as usual.
2020-08-17 17:17:59 -07:00
94ecf33a5c
Merge pull request #3281 from dhalbert/fix-spim3-buffer-location
...
SPIM3 buffer must be in first 64kB of RAM
2020-08-17 19:28:03 -04:00
19706a7eec
Merge pull request #3280 from hierophect/esp32-wroom-neopixel
...
ESP32-S2: Add Neopixel to Wroom
2020-08-17 15:07:19 -07:00
377503e61c
Merge pull request #3284 from dhalbert/fix-3171-evt-handler
...
Remove event handler before setting it to NULL
2020-08-17 15:02:29 -07:00
b1a8fb83fa
Merge pull request #3251 from jerryneedell/jerryn_rfm9x
...
RFM9x -- freeze library into build
2020-08-17 17:11:35 -04:00
6e5c2b3fe2
Merge pull request #3260 from rhooper/pixelbuf-iterable
...
Make pixelbuf support iterables and floats
2020-08-17 11:56:31 -04:00
16ff7b167c
bdmicro_vina_m0: inline limit 60 -> 50
...
The ja translation was not fitting.
2020-08-17 10:05:25 -04:00
ef40f83f99
Remove event handler before setting it to NULL
2020-08-15 14:39:53 -04:00
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
7078c63062
Add missing Neopixel pin definition
2020-08-14 16:58:24 -04:00
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
88fcc19e24
Add PulseIn
2020-08-14 15:30:48 -04:00
f9512983ff
Add PulseOut
2020-08-14 12:21:41 -04:00
98469322b7
Merge pull request #3276 from xiongyihui/main
...
support to change ble mac address
2020-08-14 11:14:36 -04:00
52990a332d
fix
2020-08-14 17:48:15 +08:00
a28d0f6c80
Merge pull request #3273 from jepler/ja-firmware-size
...
Squeeze firmwares to fit the new ja translation
2020-08-13 12:19:28 -04:00
329f4fb2e6
Update mpconfigboard.mk
...
The stm boards default to `-O2`. Changing to `-Os` brings it back to ~43kB (!) free even for ja.
2020-08-13 10:09:46 -04:00
42b860e91a
stm: meowbit_v121: remove _pixelbuf to fit ja translation
2020-08-13 07:49:45 -05:00
e7da652711
able to change ble mac address
2020-08-13 16:54:29 +08:00
44c9c43cd1
ble_uart_echo_test works
2020-08-13 00:03:39 -04:00
239c8ff87f
metro_m0_express: put back audiobusio
...
this now fits locally (though it's very close to capacity);
let's see what the CI says.
```
make BOARD=metro_m0_express clean && make BOARD=metro_m0_express TRANSLATION=ja
...
253448 bytes used, 248 bytes free in flash firmware space out of 253696 bytes (247.75kB).
```
2020-08-12 19:11:33 -05:00
7ffa2a103c
Merge pull request #3269 from jepler/sharpdisplay-v2
...
Sharp Memory Display displayio support (v2)
2020-08-12 16:53:09 -07:00
aa0b4f7045
cpx_display: Put back AUDIOBUSIO, take away ROTARYIO
...
AUDIOBUSIO is needed for the on-board mic using PDMIn
2020-08-12 16:17:48 -05:00
ea8e9b8cef
metro_m0_express: Put back GAMEPAD, take away AUDIOBUSIO
...
Dan notes that this is more frequently the solution we've chosen
2020-08-12 16:17:13 -05:00
299894025a
stringcar_m0_express: make ja translation fit
2020-08-12 13:47:10 -05:00
f08ee0db20
itsybitsy_m0_express: make ja translation fit again
2020-08-12 13:44:00 -05:00
7bd42244c9
snekboard: make ja translation fit
2020-08-12 13:34:36 -05:00
45f6bc1f3e
serpente: make ja translation fit
2020-08-12 13:32:08 -05:00
36bfbaae69
feather_radiofruit_zigbee: make ja translation fit
2020-08-12 13:28:30 -05:00
58a1361d3e
Merge remote-tracking branch 'origin/main' into ja-firmware-size
2020-08-12 13:26:12 -05:00
06f6cd067d
nrf: Improve commenting about disabled warnings
2020-08-12 12:59:48 -05:00
813dcd1b73
trinket_m0_haxpress: make ja translation fit
2020-08-12 12:44:17 -05:00
88f222f1a1
metro_m0_express: make ja translation fit
2020-08-12 12:38:17 -05:00
ba91023fff
itsybitsy_m0_express: make ja translation fit
2020-08-12 12:35:29 -05:00
6b9f7c9047
hallowing_m0_express: make ja translation fit
2020-08-12 12:29:30 -05:00
58afda342d
feather_m0_supersized: make ja translation fit
2020-08-12 11:53:34 -05:00
27c2eb1869
feather_m0_express: make ja translation fit
2020-08-12 11:51:56 -05:00
8865e4ca97
circuitplayground_express_displayio: make ja translation fit
2020-08-12 11:46:52 -05:00
f3748fe20d
circuitbrains_basic_m0: Use optimization flags to let ja translation fit
2020-08-12 11:46:31 -05:00
f9d1d9d114
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 11:15:34 -05:00
454e616d13
atmel-samd: disable FRAMEBUFFERIO on samd21
...
.. this disables SHARPMEMORY as well.
2020-08-12 10:46:56 -05:00
3197c579e0
Merge pull request #3262 from tannewt/fix_fs_corruption
...
Fix writing sector 0 as the first write.
2020-08-12 08:14:55 -07:00
32fc8b0676
nrf: reset_pin_number: reset pin clears never-reset, mirroring samd
2020-08-12 07:32:18 -05:00
760a171903
nrf: Make port build with -Werror=undef
...
.. build-tested on particle_xenon
2020-08-12 07:32:18 -05:00
49407b6c06
trailing spaces fix
2020-08-12 13:42:45 +02:00
e34fac6645
Whitespace and Newline fix
2020-08-11 23:59:32 +02:00
06f3b4048a
fix #3228 for nrf; still needs to be fixed for HCI; tested
2020-08-11 16:21:16 -04:00
228d9b5a12
Fixing indentation
2020-08-11 22:18:15 +02:00
22ae1dbac8
Removing unnecessary pin ignored
2020-08-11 22:17:17 +02:00
00676ff5a9
PicoPlanet
2020-08-11 21:49:52 +02:00
8488b31aa0
Init directly
2020-08-11 11:19:40 -07:00
bbac68e77c
Merge pull request #3232 from hierophect/esp32-neopixel
...
ESP32-S2: Add Neopixel support
2020-08-11 11:04:39 -07:00
87c78be8f4
Fix writing sector 0 as the first write.
...
This was the FS issue I saw when debugging wifi and only happens
when the first write is to sector 0. It causes issues because it
blanks all of sector 0 after the first block.
Fixes #3133
2020-08-10 17:14:49 -07:00
807f049dc3
Merge pull request #3244 from xiongyihui/main
...
add an option to turn off QSPI when sleep
2020-08-10 16:06:57 -05:00
1cf3762392
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-10 12:54:12 -05:00
d47bd5529c
Fix neopixel macro issue, set default neopixel color
2020-08-10 13:16:20 -04:00
0f4b969d62
discovery of Nordic UART service working
2020-08-08 00:29:37 -04:00
1d980d527e
Merge remote-tracking branch 'upstream/main' into jerryn_rfm9x
2020-08-07 12:48:41 -04:00
af1291ec28
dynamically enable or disable QSPI by default
2020-08-07 16:23:42 +08:00
f7961b96a9
update comment
2020-08-06 10:05:18 -04:00
c42ffb8f3d
remove usb_hid
2020-08-06 05:44:26 -04:00
d8257380d7
add qspi_disable()
2020-08-06 09:56:05 +08:00
78d049d0f1
Fix pwm reset spew, protect against null reference in led status
2020-08-05 14:05:53 -04:00
432f43a472
freeze rfm9x and BusDevice, remove many built-in modules
2020-08-05 11:37:57 -04:00
c7b6e66426
Fixes for pulsein tick handling
2020-08-05 10:03:20 -05:00
7854625c4e
avoid using the RGB LEDs to save energy
2020-08-05 16:08:13 +08:00
dbe47a6a2a
adjust
2020-08-05 16:07:18 +08:00
93b373d617
"pop from empty %q"
...
Saves 12 bytes code on trinket m0
2020-08-04 18:42:09 -05:00
14b3b51c58
Rework build flags, prevent idf errors
2020-08-04 18:40:24 -04:00
ac95106b88
service discovery works; need to work on char and descriptor discovery
2020-08-04 18:24:37 -04:00
c849b781c0
Combine 'index out of range' messages
2020-08-04 14:45:45 -05:00
89797fd3f9
various: Use mp_obj_get_type_qstr more widely
...
This removes runtime allocations of the cstring version of the qstring.
It is not a size improvement
2020-08-04 14:45:45 -05:00
dddd25a776
Combine similar strings to reduce size of translations
...
This is a slight trade-off with code size, in places where a "_varg"
mp_raise variant is now used. The net savings on trinket_m0 is
just 32 bytes.
It also means that the translation will include the original English
text, and cannot be translated. These are usually names of Python
types such as int, set, or dict or special values such as "inf" or
"Nan".
2020-08-04 13:34:29 -05:00
6dc0f4f1b6
add an option to turn off QSPI when sleep
2020-08-05 01:10:58 +08:00
0e2d231445
Merge remote-tracking branch 'origin/main' into stm32-sdioio
2020-08-03 21:01:53 -05:00
a995a5c58f
wip: partial discovery responses; compiles; not tested
2020-08-03 21:02:57 -04:00
d7eedc5e38
Merge pull request #20 from adafruit/main
...
Update from main
2020-08-03 13:14:01 -05:00
9203a77804
Turn off interrupts while in handler
2020-08-03 11:31:12 -05:00
4900668778
Merge remote-tracking branch 'upstream/main' into esp32-neopixel
2020-08-03 12:26:37 -04:00
0e30fe1cc5
Update VID & PID codes
2020-08-02 19:54:11 -05:00
0a60aee3e4
wip: compiles
2020-08-02 11:36:38 -04:00
b074f8a161
update for build test
2020-08-02 00:42:36 -05:00
fea1cad02c
add support for Bast Wifi Electronic Cats
2020-08-01 17:51:45 -05:00
12b81618a3
Changes for getting supervisor ticks
2020-08-01 13:27:02 -05:00
1771858f4a
add RELEASE_NEEDS_CLEAN_BUILD for lang-specific CFLAGS_INLINE_LIMIT changes
2020-08-01 13:20:46 -04:00
4b71831d8b
SUPEROPT_VM = 0 for de_DE
2020-08-01 12:36:20 -04:00
94b2561860
Fix include error
2020-08-01 09:22:18 -04:00
1c1df053d5
Add neopixel support
2020-07-31 15:34:12 -04:00
27c6ffb9a2
atmel-samd: gemma, trinket: Make space for de_DE translation
2020-07-30 11:29:47 -05:00
d69f081c04
Merge remote-tracking branch 'origin/main' into blm_badge
2020-07-30 07:24:48 -05:00
531c1e046c
Merge pull request #3226 from joeycastillo/main
...
Small updates to Open Book board
2020-07-30 07:21:50 -05:00
f175a49444
stm: sdioio: include header for common_hal_mcu_pin_claim
2020-07-30 07:18:12 -05:00
b57e6e9856
stm: sdioio: call common_hal_mcu_pin_claim
2020-07-30 07:18:12 -05:00
d73505a027
stm: fix if-guard of conditional code
2020-07-30 07:18:12 -05:00
60dd5a8d7d
stm: sdioio: remove unused code related to "SD Card detect pin"
...
.. this probably came from the examples that I studied at the beginning
of implementation.
The card detection feature is unused. As a "detect pin" is not
sent from the shared-bindings, there is no way to get the correct pin
anyway. Instead, if code needs to detect the insertion state it can
directly use the pin as GPIO in Python code.
2020-07-30 07:18:02 -05:00
ccd3013396
stm: stioio: correctly claim pins
2020-07-30 07:18:02 -05:00
3cf1258c87
stm: sdioio: Get rid of debug code and useless comments
2020-07-30 07:18:02 -05:00
6a99a7b551
stm: Use 'Invalid %q pin selection' more places
2020-07-30 07:18:02 -05:00
92d2f47503
feather_stm32f405_express: sdio_data_tuple should be static
2020-07-30 07:18:02 -05:00
4adbd23b75
stm: Add sdioio support for feather_stm32f405_express
...
Currently, only the bus specs of the stm32f405xx have been coded.
Other stm-family chips need (at a minimum) the specs added in their
periph.[ch] files.
2020-07-30 07:18:02 -05:00
d30f11163c
stm: enable SD module in HAL
2020-07-30 07:18:02 -05:00
af135a7560
atmel-samd: move samd-specific script
2020-07-30 07:18:02 -05:00
8acec2ca35
add descriptive pin names
2020-07-29 13:49:08 -04:00
ea9bc9b4b6
set screen orientation to portrait
2020-07-29 13:46:10 -04:00
b2ec77e554
Merge remote-tracking branch 'adafruit/main' into improve-highspeed-usb
2020-07-29 23:14:52 +07:00
b6724e843c
update CDC/MIDI bufsize to at least 512 for highspeed port
2020-07-29 16:22:27 +07:00
6063828279
replace USB_MSC_MAX_PACKET_SIZE with USB_HIGHSPEED in descriptor gen tool
2020-07-29 15:38:55 +07:00
ca9eae8eea
Merge pull request #3209 from pewpew-game/fluff-m0-pins
...
fluff_m0: add pin aliases
2020-07-28 15:15:15 -04:00
824a57c6f4
Merge pull request #3218 from tannewt/use_gcc10_peripherals
...
Use samd peripherals fixed for gcc 10
2020-07-28 15:14:20 -04:00
b30d89131b
Merge pull request #3215 from ansonhe97/main
...
Added display QSTR to Wio Terminal
2020-07-28 11:53:17 -07:00
aa97ea2501
Merge remote-tracking branch 'adafruit/main' into blm_badge
2020-07-28 14:15:02 -04:00
92216d6417
Use samd peripherals fixed for gcc 10
2020-07-28 11:14:25 -07:00
e5e132a364
add blm_badge; add CIRCUITPY_AUDIOBUSIOIO_I2SOUT
2020-07-28 11:49:54 -04:00
e15bcebb6e
Added display QSTR to Wio Terminal
2020-07-28 17:31:17 +08:00
d37326326d
init bastwifi
2020-07-28 00:56:37 -05:00
945736e9bb
add adjustments for crickit and displayio variants of CPX
2020-07-27 22:13:04 -04:00
2bdd62220e
adjust stack for SAMD21 to accomodate larger pystack -- update frozen module adafruit_busdevice
2020-07-27 21:50:36 -04:00
debbf1028a
Merge pull request #3196 from IkigaiSense/ikigaisense_vita
...
add-ikigaisense_vita-nRF52840
2020-07-27 16:10:57 -07:00
f4f2018952
Merge pull request #3101 from ndGarage/ndgarage_ndbit6_v2
...
ndgGarage ndbit6 v2
2020-07-27 15:51:23 -07:00
7be9837f73
Merge pull request #3193 from ciscorn/type-annotations
...
More type hints
2020-07-27 14:26:54 -07:00
d356581651
Fix several type hints
2020-07-27 18:05:13 +09:00
b2c4b0bcfa
fluff_m0: don't exclude portb pins explicitly
2020-07-26 17:26:32 +02:00
b1b253c012
fluff_m0: add pin aliases
...
Add aliases for SDI, SDO and EN, so that pin names match the text on the
PCB to avoid confusion.
Also disable all pins from port B, because that package of SAMD21
doesn't have port B.
2020-07-26 13:39:42 +02:00
7ab5c520e6
Merge pull request #3190 from DavePutz/opt-test
...
Changes to allow different compiler optimizations per board
2020-07-25 17:03:10 -04:00
b7e6bf959e
Merge pull request #3205 from burtyb/commander-2
...
Add GamePad to Commander board
2020-07-25 16:57:58 -04:00
c4a5297ee2
Add GamePad to Commander
2020-07-25 17:53:27 +00:00
microDev
lady ada
Jeff Epler
Scott Shawcroft
Scott Shawcroft
Jerry Needell
Lucian Copeland
root
Dan Halbert
Dan Halbert
Jeff Epler
Jeff Epler
Benjamin Shockley
Kamil Tomaszewski
bunnie
Brent Rubell
Yihui Xiong
bleeptrack
DavePutz
sabas1080
Joey Castillo
hathach
ansonhe97
Taku Fukada
Radomir Dopieralski
Chris Burton