Dan Halbert
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
Dan Halbert
bb77f1d130
wip: initial code changes, starting from @tannewt's sleepio branch
2020-11-16 11:56:20 -05:00
microDev
f2824f6a68
update frequency measurement
2020-11-16 12:55:55 +05:30
microDev
2bec02738f
move interrupt handler to iram
2020-11-16 11:44:11 +05:30
BennyE
d4ab00f734
Set station mode early to avoid SoftAP on startup
2020-11-16 00:31:06 +01:00
microDev
c4917cdabd
frequencyio implementation for esp32s2
2020-11-16 00:11:00 +05:30
Jeff Epler
231e3d362d
esp32s2: Update esp-idf submodule to include fix for #3424
...
This re-points the submodule to my personal fork of esp-idf.
Users may need to `git submodule sync` in their existing trees when
this change occurs.
Adds just the following commit in esp-idf:
> esp_crt_bundle: Allow verify_callback to correct BADCERT_BAD_MD
2020-11-14 10:16:39 -06:00
microDev
146adca060
Add watchdog mode raise
2020-11-14 11:41:14 +05:30
Scott Shawcroft
8d4296f964
Add board.DISPLAY to MagTag. Fix luma computation
...
* Initialize the EPaper display on the MagTag at start.
* Tweak the display send to take a const buffer.
* Correct Luma math
* Multiply the blue component, not add.
* Add all of the components together before dividing. This
reduces the impact of truncated division.
2020-11-13 18:57:52 -08:00
Jeff Epler
0f7081781e
esp32s2: wifi: fix several debug-build errors
...
Closes #3688
With this change, I don't get the ESP_ERROR_CHECK failed repeatedly
running code that imports wifi. (I'm not getting a successful connection
but that's probably my own fault, such as a secrets problem)
2020-11-12 20:40:45 -06:00
microDev
ff41180237
pcnt reset on reload
2020-11-12 16:30:30 +05:30
Scott Shawcroft
a47dea4922
Merge pull request #3671 from FoamyGuy/um_feathers2_board_spi_i2c
...
board.SPI() and board.I2C() for UnexpectedMaker Feather S2
2020-11-11 17:22:23 -08:00
microDev
35ef6c687f
nvm implementation for esp32s2
2020-11-11 23:11:12 +05:30
foamyguy
118ca7cff4
adding default uart pins
2020-11-11 06:56:57 -06:00
microDev
f9842566d8
Add default pin definitions
2020-11-11 10:22:48 +05:30
foamyguy
8373146c56
newline end of file
2020-11-10 15:29:17 -06:00
Scott Shawcroft
ddb3590944
Merge pull request #3647 from DavePutz/issue3579
...
Issue3579 - Check for CTRL-C During sleep on esp32s2
2020-11-10 13:09:57 -08:00
foamyguy
1192eebcdf
adding spi and i2c to board for um feather s2
2020-11-10 14:12:44 -06:00
Lucian Copeland
21ca1b8c2b
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-10 14:59:32 -05:00
Lucian Copeland
d16d27a449
Merge remote-tracking branch 'tannewt/esp32s2_udp' into esp32s2-udp
2020-11-10 14:51:36 -05:00
Scott Shawcroft
75a977febd
Merge pull request #3668 from jepler/esp32s2-stack-size
...
esp32s2: Correct port_stack_get_top()
2020-11-10 10:56:12 -08:00
root
fe7ed99939
Split out extern declare to ports/esp32s2/supervisor/esp_port.h
2020-11-10 12:45:39 -06:00
root
44425b8d94
Requested review changes made
2020-11-10 11:32:59 -06:00
Jeff Epler
2d8ebfcf63
esp32s2: Correct port_stack_get_top()
...
Closes #3649
2020-11-10 10:42:53 -06:00
microDev
6c59836c5d
watchdog implementation for esp32s2
2020-11-10 16:32:46 +05:30
Scott Shawcroft
61bf0e99c6
Merge pull request #3653 from tannewt/magtag
...
Rebrand EInk Portal to MagTag
2020-11-09 16:00:09 -08:00
Scott Shawcroft
d1f15d314b
Rename to include display details
2020-11-09 15:03:22 -08:00
microDev
7ba2c5772c
Update license
2020-11-08 11:18:05 +05:30
microDev
55e0e2c4ba
Update rotaryio implementation
2020-11-08 11:12:32 +05:30
microDev
479567059e
Merge branch 'main' into rotaryio-S2
2020-11-08 00:00:01 +05:30
Scott Shawcroft
b2e83952c0
Rebrand EInk Portal to MagTag
2020-11-06 15:27:16 -08:00
Scott Shawcroft
01c7a06dcc
Merge pull request #3615 from microDev1/CountIO-S2
...
ESP32S2: Support for CountIO
2020-11-06 12:29:13 -08:00
root
d948e6570f
Changes to handle Ctrl-C during sleep
2020-11-05 21:27:21 -06:00
microDev
ac8a0faa0d
update peripherals_pcnt_init()
2020-11-06 01:42:20 +05:30
Dan Halbert
81bb92bdd2
Merge pull request #3639 from tannewt/fix_recv
...
Rework socketpool.Socket.recv to return sooner
2020-11-05 14:11:13 -05:00
root
c2aa54ae66
Check for Ctrl-C during sleeps
2020-11-05 11:10:40 -06:00
microDev
d8ef9a127b
rename pcnt_handler to pcnt
2020-11-05 10:10:39 +05:30
microDev
fe6bfde590
move pcnt handler
2020-11-04 21:20:24 +05:30
Lucian Copeland
472a5a99ec
Add API reset to reset_pin_number
2020-11-03 16:31:53 -05:00
Ed Hagerty
4055c5ac61
Update README.md
2020-11-03 17:14:58 +00:00
Limor "Ladyada" Fried
4938054c05
Merge pull request #3638 from ladyada/main
...
io naming for gpio (credit to @kattni)
2020-11-03 09:17:33 -05:00
lady ada
c4521287e3
add rx/tx default uart names
2020-11-02 23:22:53 -05:00
Scott Shawcroft
7441344c6f
Add new config options to default
2020-11-02 17:22:24 -08:00
Scott Shawcroft
18838e390a
reduce connection footprint and fix recv
2020-11-02 16:44:55 -08:00
lady ada
6c61a53e0f
io naming for gpio (credit to @kattni)
2020-11-02 18:38:23 -05:00
Lucian Copeland
23afe08b6f
Add GPIO reset to end of neopixel-write
2020-11-02 17:15:19 -05:00
microDev
4438050f79
Add pcnt handler
2020-11-01 18:00:07 +05:30
Scott Shawcroft
7fd73c7d39
Initial UDP work. Need to test
2020-10-28 18:08:31 -07:00
lady ada
25bad660c6
add light sensor, move batt monitor
2020-10-28 19:23:18 -04:00
Scott Shawcroft
7cbc50962b
Merge pull request #3611 from tannewt/esp32s2_eink_portal
...
Add Adafruit ESP EInk Portal and grayscale EInk support
2020-10-28 14:45:29 -07:00
microDev
5e3bfa1956
countio implementation for esp32s2
2020-10-28 20:08:25 +05:30
Scott Shawcroft
9a4efed8cb
Start tweaking the workflow to sleep
2020-10-27 17:55:03 -07:00
microDev
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
microDev
59df1a11ad
Add alarm_touch module
2020-10-27 16:16:52 -07:00
microDev
da449723df
Fix build error
2020-10-27 16:16:15 -07:00
microDev
4d8ffdca8d
restructure alarm modules
2020-10-27 16:15:09 -07:00
microDev
e5ff55b15c
Renamed alarm modules
2020-10-27 16:13:25 -07:00
microDev
21ba61afbb
Add function to disable alarm
2020-10-27 16:13:25 -07:00
microDev
05a3f203db
Add function to get time elapsed during sleep
2020-10-27 16:13:25 -07:00
microDev
e310b871c8
Get io wake working
2020-10-27 16:13:25 -07:00
microDev
90b9ec6f2c
Initial Sleep Support
2020-10-27 16:13:22 -07:00
Scott Shawcroft
557a58b244
Merge pull request #3591 from microDev1/TouchIO-S2
...
ESP32S2: Support for native TouchIO
2020-10-27 14:11:39 -07:00
Scott Shawcroft
73162bda85
Merge pull request #3584 from jepler/can-esp32s2
...
esp32s2: implement canio
2020-10-27 14:01:07 -07:00
microDev
80029f6929
rotaryio implementation for esp32s2
2020-10-28 00:12:13 +05:30
Jeff Epler
3a501a0495
esp32s2: canio: respond to review comments
...
* explain the introduction of the temporary variable in get_t_config
* get rid of unneeded __attribute__
* get rid of unneeded members of canio_can_obj_t
* get rid of unneeded header inclusion
2020-10-26 19:18:37 -05:00
Jeff Epler
2ba6659967
esp32s2: Makefile: restore --no-stub
2020-10-26 19:07:37 -05:00
Scott Shawcroft
95cb5961d2
Fix ESP32-S2 SPI when DMA is sometimes used
2020-10-26 16:59:59 -07:00
Scott Shawcroft
fc591c8d84
Add EInk Portal
2020-10-26 16:59:59 -07:00
Jeff Epler
caca0609bd
Merge pull request #3607 from hierophect/esp32-readme-clarity
...
ESP32-S2: Fix readme link, improve instruction clarity
2020-10-26 12:43:51 -05:00
Lucian Copeland
32f2a8d54c
Fix readme link
2020-10-26 11:03:54 -04:00
Jeff Epler
396d92f867
esp32s2: Add canio
...
This works in loopback mode, though the hardware filtering only permits a
single address or mask filter.
2020-10-26 09:54:58 -05:00
microDev
ef97ed6ab6
Update touchio implementation
2020-10-23 13:17:49 +05:30
Scott Shawcroft
c8808f41a5
Merge pull request #3580 from astrobokonon/esp32s2-FixSTAMODE
...
ESP32S2: Reset sta_mode and ap_mode flags
2020-10-22 13:48:45 -07:00
microDev
f431f859e7
Initial support for native touchio
2020-10-22 21:32:44 +05:30
Scott Shawcroft
50e90088a2
Merge pull request #3586 from Targett363/esp32s2_module_clip
...
Esp32s2 module clip
2020-10-21 12:58:23 -07:00
Ryan T. Hamilton
e202da4dad
Change comment wording
2020-10-20 15:14:35 -07:00
Ryan T. Hamilton
c58b0adf64
Reset sta_mode and ap_mode flags
2020-10-20 14:49:57 -07:00
Targett363
a2fce305d6
Replacing placeholder PIDs with correct PIDs
2020-10-20 10:42:14 +01:00
Scott Shawcroft
d606a3e968
Merge pull request #3484 from astrobokonon/esp32s2-morenet
...
Esp32s2: Expose more network parameters
2020-10-19 15:07:20 -07:00
askpatricw
d6805c0dd4
SDA and SCL were flipped
2020-10-18 17:15:59 -07:00
Ryan T. Hamilton
76f1db7a87
Set sta_mode flag for actual use/checking
2020-10-17 00:23:31 -07:00
Ryan T. Hamilton
9d840aab0b
Cleaned up and now testing
2020-10-15 23:45:11 -07:00
Ryan T. Hamilton
b336039aab
Disable the long way and return an ap_info object
...
still needs work and cleanup
2020-10-15 23:18:30 -07:00
Scott Shawcroft
6b272eeb27
Merge pull request #3555 from UnexpectedCircuitPython/main
...
Added default LWIP hostnames to FeatherS2 boards
2020-10-15 15:12:40 -07:00
Scott Shawcroft
31223e4ae5
Merge pull request #3530 from askpatrickw/hostname-example
...
Set default hostname
2020-10-15 15:11:58 -07:00
Seon Rozenblum
45a3bd1c04
Added default LWIP hostnames to FeatherS2 boards
2020-10-16 06:47:59 +11:00
microDev
18fbff4f57
Update wifi hostname method
2020-10-14 11:11:59 +05:30
microDev
ceb531086e
Add method to set custom hostname
2020-10-13 14:22:02 +05:30
Scott Shawcroft
9de96786ad
Merge pull request #3538 from jepler/parallel-qstrlast
...
build: parallelize the qstr build steps
2020-10-12 15:52:43 -07:00
Jeff Epler
8ddbebd2c1
esp32s2: fix build after qstr rule changes
2020-10-12 13:35:15 -05:00
Targett363
60deb321d1
adding USB PID VID
2020-10-10 23:55:05 +01:00
Targett363
5721cf0710
tidying up board names
2020-10-10 22:42:24 +01:00
Targett363
ead0d51fd7
Commenting out Neopixel in pins.c
2020-10-10 22:22:01 +01:00
Targett363
74954286f0
Putting the Saola Wrover files back and adding my Wrover board files this time
2020-10-10 21:44:14 +01:00
Targett363
f38e868e90
Actually adding Wrover board files this time
2020-10-10 21:28:26 +01:00
Targett363
b9e308c248
Adding Wroom and Wrover board files
2020-10-10 21:11:06 +01:00
Lucian Copeland
b435ef0272
Merge remote-tracking branch 'upstream/main' into esp32-analogout
2020-10-09 17:19:46 -04:00
Scott Shawcroft
375676ff58
Merge pull request #3501 from hierophect/esp32-analogin
...
ESP32S2: Add AnalogIn
2020-10-09 14:10:24 -07:00
Scott Shawcroft
506936ea2e
Merge pull request #3525 from UnexpectedCircuitPython/UM_S2_Boards
...
Fixed the FeatherS2 prerelease hardware name
2020-10-09 10:20:13 -07:00
askpatricw
2b2003f3e7
Set default hostname
2020-10-08 22:46:10 -07:00
Ryan T. Hamilton
99f27bea61
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-10-08 12:43:52 -07:00
Lucian Copeland
b5f8321d37
Merge branch 'esp32-analogin' into esp32-analogout
2020-10-08 12:42:00 -04:00
Lucian Copeland
97d217a764
Merge remote-tracking branch 'upstream/main' into esp32-analogin
2020-10-08 12:34:58 -04:00
hathach
e1fc85c56b
fix usb issue with latest idf
2020-10-08 13:30:32 +07:00
Seon Rozenblum
d93a1961c4
Fixed the FeatherS2 prerelease hardware name
2020-10-08 14:03:16 +11:00
hathach
b7ed18d622
change idf to espressif
...
fix hal includes
2020-10-08 00:52:00 +07:00
Lucian Copeland
9ac0aae5a9
Merge remote-tracking branch 'upstream/main' into esp32-analogout
2020-10-07 12:21:04 -04:00
Lucian Copeland
7386a948bd
Merge remote-tracking branch 'upstream/main' into esp32-analogin
2020-10-07 12:20:30 -04:00
Scott Shawcroft
8c428a3bdd
Merge pull request #3492 from hierophect/esp32-update-idf
...
ESP32S2: move to official IDF submodule
2020-10-06 16:53:32 -07:00
Lucian Copeland
d5c8e55769
Add AnalogIO
2020-10-06 15:13:50 -04:00
Lucian Copeland
68cb384f8f
Remove logging from shared-bindings, fix translations, revert config target macro
2020-10-06 13:29:12 -04:00
Lucian Copeland
f90eb23db1
Merge branch 'esp32-update-idf' into esp32-analogin
2020-10-06 12:52:40 -04:00
Lucian Copeland
0d7552b67e
Update ESP-IDF to newer fixed fork
2020-10-06 12:48:28 -04:00
Seon Rozenblum
5c00ba8592
Removed hardware APA settings from mpconfigboard.h because they make the APA flicker on boot. I need to look into why, but I don't think they are being used for anything right now anyway.
2020-10-06 07:40:20 +11:00
hierophect
e93a274f2f
Merge branch 'main' into esp32-analogin
2020-10-05 13:02:42 -04:00
Lucian Copeland
0467a82880
Fix/remove various style issues
2020-10-05 13:00:42 -04:00
Lucian Copeland
a8dfae58d9
Add ADC calibration module support
2020-10-01 17:17:39 -04:00
Scott Shawcroft
d62ac24493
Merge pull request #3469 from jepler/noreturn
...
Add some NORETURN attributes
2020-10-01 11:18:36 -07:00
Scott Shawcroft
2ad54f8413
Merge pull request #3463 from UnexpectedCircuitPython/UM_S2_Boards
...
Updated UM FeatherS2 boards
2020-10-01 10:56:55 -07:00
Lucian Copeland
9a3bd82f40
Update TinyUSB include compatibility
2020-10-01 13:19:54 -04:00
Lucian Copeland
0bbd067a17
Revert ADC calibration removal, complete merge
2020-10-01 13:06:48 -04:00
Lucian Copeland
c624c1e838
Merge branch 'esp32-update-idf' into esp32-analogin
2020-09-30 16:51:19 -04:00
Lucian Copeland
e01e8dd6b9
Revert HAL refactor changes to avoid USB breaking changes past esp-idf dde6222cd
2020-09-30 16:36:13 -04:00
Scott Shawcroft
a739d314f1
Add Metro ESP32S2
...
Also fix two bugs:
* Crash when resetting board.SPI when it hasn't been inited.
* Reading back the output value is always false. Fixes #3353
2020-09-30 12:57:39 -07:00
Scott Shawcroft
a09a158ddc
Fix trailing line
2020-09-30 11:36:51 -07:00
Lucian Copeland
66b8559fd4
Change submodule, rework all includes
2020-09-30 11:26:07 -04:00
Seon Rozenblum
819b5faa71
Removed ProS2 board files for now
2020-09-30 10:23:54 +10:00
Seon Rozenblum
4b1a7d812e
Updated UM boards
2020-09-30 10:16:24 +10:00
Seon Rozenblum
a2a0aa058f
Updated UM boards
2020-09-30 10:13:05 +10:00
Ryan T. Hamilton
2f6d7c9002
Make sure you're a STA before connecting
2020-09-29 13:41:56 -07:00
Jeff Epler
2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate
...
Update make translate script
2020-09-29 14:32:49 -05:00
microDev
4c7d9e3aaf
Update make translate script
2020-09-29 11:14:30 +05:30
Jeff Epler
d4ee440a91
Merge pull request #3475 from tannewt/esp_uf2
...
Reorganize sdkconfigs and release UF2s
2020-09-28 20:39:37 -05:00
Ryan T. Hamilton
2a4a244245
Add ap_ssid and ap_bssid
2020-09-28 17:25:09 -07:00
Jeff Epler
1dbb59271c
esp32: Use esp_restart from reset_to_bootloader; redeclare it NORETURN
2020-09-28 18:56:01 -05:00
Jeff Epler
726dcdb60a
Add some NORETURN attributes
...
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
// precondition: you already verified that a slot was available
for (int i=0; i<NUM_SLOTS; i++) {
if( slot_free(i)) {
return i;
}
}
safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.
So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN.
Additional notes:
* stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway.
* ditto cxd56
* esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested)
* litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
* cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
* In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
* the stub safe_mode reset simply aborts. This is used in mpy-cross.
2020-09-28 18:55:56 -05:00
Ryan T. Hamilton
66d55738c1
Enable DNS info
2020-09-28 16:49:20 -07:00
Scott Shawcroft
abdbbf9e24
One grep
2020-09-28 15:10:12 -07:00
Lucian Copeland
128b4a013b
Add non-calibrated ADC
2020-09-28 12:11:08 -04:00
Ryan T. Hamilton
b9968ea801
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-09-26 13:37:14 -07:00
Scott Shawcroft
dd86cb00ad
Merge pull request #3448 from hierophect/esp32-sd-fix
...
ESP32S2 - Fix SPI's SD card issue, add pin protections
2020-09-23 12:30:01 -07:00
Lucian Copeland
00517b2600
Move missing pin warning to shared-bindings
2020-09-23 11:39:39 -04:00
microDev
add230b4da
Update port.c
2020-09-22 11:37:12 +05:30
Ryan T. Hamilton
a77966a736
Try to reuse/share existing objects
2020-09-21 21:36:46 -07:00
Ryan T. Hamilton
2fa269ccbc
Additional error handling
2020-09-21 20:56:03 -07:00
Lucian Copeland
22d9a94f2b
Use write_value, add missing pin exceptions
2020-09-21 13:47:14 -04:00
Scott Shawcroft
c963771b4b
Merge pull request #3445 from microDev1/boardInfo
...
Update microS2 config files
2020-09-21 10:33:38 -07:00
microDev
40ec7a66e4
Update microS2 config files
2020-09-21 14:39:31 +05:30
Ryan T. Hamilton
bc8863a3c7
Simplify now that I have it working
...
still need to figure out the bound method business
2020-09-19 21:04:07 -07:00
Ryan T. Hamilton
04ffd0dca0
Add gateway, subnet, and rssi info for current connected AP
...
ap_rssi is a bound method, which I'm not keen on, but it works
2020-09-19 13:38:04 -07:00
Dan Halbert
dfd09bba57
Merge pull request #3433 from astrobokonon/esp32s2-bssid
...
ESP32S2: Allow connecting to specific bssid
2020-09-18 21:31:15 -04:00
Scott Shawcroft
17bdc969db
Reorganize sdkconfigs and release UF2s
2020-09-17 16:01:23 -07:00
Ryan T. Hamilton
1805e92038
Add else case for non-bssid usage
2020-09-17 15:04:27 -07:00
Scott Shawcroft
7f60ebd6c7
Merge pull request #3426 from tannewt/esp_flash_sizes
...
Add partition layouts for 8 and 16 MB as well.
2020-09-17 13:27:58 -07:00
Scott Shawcroft
9cf9441ba6
Merge pull request #3393 from tannewt/fix_spi_psram
...
Add non-DMA SPI support.
2020-09-17 11:11:56 -07:00
Scott Shawcroft
78338ac12b
Merge pull request #3417 from hierophect/esp32s2-readme
...
ESP32S2: Add Readme
2020-09-17 10:58:17 -07:00
Ryan T. Hamilton
1e3241ec6d
Merge branch 'main' into esp32s2-bssid
2020-09-16 17:15:01 -07:00
Ryan T. Hamilton
daa1dd278d
connect now accepts bssid
2020-09-16 16:25:17 -07:00
Scott Shawcroft
c55deb54f0
Merge pull request #3427 from usini/muselab_nanoesp32_s2
...
Added board - Muselab nanoESP32-S2
2020-09-16 12:23:41 -07:00
askpatricw
18285f96e8
RTC is pickd up automatically
2020-09-16 10:13:07 -07:00
Lucian Copeland
478a4b6405
Clarify location of port root
2020-09-16 10:51:08 -04:00
Rémi Sarrailh
c06aeda399
Add Muselab nanoesp32 s2 definition
2020-09-16 13:10:01 +02:00
Ryan T. Hamilton
fead60d2d8
Add BSSID to Network
2020-09-15 23:32:53 -07:00
Scott Shawcroft
2bd169ec32
Add partition layouts for 8 and 16 MB as well.
2020-09-15 18:12:06 -07:00
askpatricw
bd381e434f
Revert "code review feedback"
...
This reverts commit f9f614b3a2
2020-09-15 13:02:26 -07:00
askpatricw
f9f614b3a2
code review feedback
2020-09-15 11:28:31 -07:00
askpatricw
8fcdc7da16
RTC enabled
2020-09-14 23:24:44 -07:00
Lucian Copeland
3640ef2b7f
Fix toctree, incorrect flash port assumptions
2020-09-14 17:37:55 -04:00
Lucian Copeland
6ecfdda580
Add Readme
2020-09-14 13:18:51 -04:00
Lucian Copeland
e504438fd2
Remove unlicensed file, fix reset pin type check
2020-09-14 11:58:13 -04:00
Lucian Copeland
ecc219fe50
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-14 10:44:31 -04:00
microDev
4da478382d
Fix serial console output & add more boards
2020-09-12 17:46:52 +05:30
microDev
305bed6d9e
Added esp32s2 safe_mode & fixed user_safe_mode
2020-09-11 21:06:54 +05:30
Scott Shawcroft
c7c90f47b0
Add non-DMA SPI support.
...
This fixes SPI with PSRAM allocated buffers. DMA with SPI2 was
attempted but produced junk output. This manual copy is less than
2x slower than DMA when not interrupted.
Fixes #3339
2020-09-10 17:32:20 -07:00
Scott Shawcroft
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
Scott Shawcroft
683462c1b1
Merge pull request #3326 from tannewt/native_wifi
...
Add native wifi API with ESP32S2 support
2020-09-10 11:20:44 -07:00
Lucian Copeland
be199983c1
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-09 13:24:30 -04:00
Scott Shawcroft
99f5011d74
Fix heap without PSRAM. Never set heap_size.
2020-09-08 17:06:09 -07:00
microDev
14af8e4b42
Added temp_sensor_stop
...
Co-authored-by: hierophect <hierophect@gmail.com>
2020-09-08 21:07:00 +05:30
microDev
c68723db3c
Update Processor.c
2020-09-08 15:13:48 +05:30
root
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
Scott Shawcroft
96cf60fbbd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-09-03 16:34:56 -07:00
Scott Shawcroft
0b94638aeb
Changes based on Dan's feedback
2020-09-03 16:32:12 -07:00
Lucian Copeland
4733a67226
Add GDB debugging capability
2020-09-02 11:27:42 -04:00
Scott Shawcroft
7b59ede25e
Add remaining pins
2020-08-28 18:22:22 -07:00
Scott Shawcroft
0bb5c6c07f
Add unique USB PID
2020-08-28 16:37:25 -07:00
Scott Shawcroft
a09243472c
Add Kaluga board definition
2020-08-28 16:08:24 -07:00
Dan Halbert
ac06202c21
Merge pull request #3238 from ElectronicCats/bastwifi
...
Add Bastwifi by Electronic Cats
2020-08-28 11:03:52 -04:00
Scott Shawcroft
2b71635c49
Fix esp-idf requirements
2020-08-27 11:45:51 -07:00
Scott Shawcroft
fd6e63d806
Hopefully final partition scheme.
2020-08-27 11:43:06 -07:00
Scott Shawcroft
767ca5c3dc
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-27 11:42:31 -07:00
Dan Halbert
24fb08dbd9
Merge pull request #3337 from hierophect/pulseout-errorstyle
...
Fix problematic whitespace on pulseout parameter errors
2020-08-27 13:22:26 -04:00
Dan Halbert
350e88d4b9
Merge pull request #3324 from hierophect/esp32-random
...
Add random to ESP32-S2, fix it on STM32
2020-08-27 13:22:05 -04:00
Dan Halbert
6100027243
Merge pull request #3315 from tannewt/add_psram
...
Add PSRAM support to ESP32S2
2020-08-27 11:58:59 -04:00
Lucian Copeland
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
hierophect
a15f948a40
Merge branch 'main' into esp32-random
2020-08-27 10:49:14 -04:00
Dan Halbert
fe73cfb922
Merge pull request #3333 from hierophect/esp32-enable-ulab
...
Fix all assignments affected by inline makefile comments
2020-08-27 10:36:59 -04:00
Lucian Copeland
553ac576eb
Disable ulab
2020-08-26 17:48:29 -04:00
Lucian Copeland
c77523503b
Fix trailing whitespace errors across ports and docs
2020-08-26 14:48:46 -04:00
Jeff Epler
44342732a4
Fix DOS line endings, they give my git fits
2020-08-26 10:56:00 -05:00
Dan Halbert
5755160720
Merge pull request #3322 from microDev1/microS2
...
Added board - microS2
2020-08-26 11:03:46 -04:00
microDev
f26d15c5c9
Added PSRAM support
2020-08-26 18:39:30 +05:30
Dan Halbert
01ddb177fc
Remove whitespace in sdkconfig
2020-08-26 09:07:54 -04:00
Dan Halbert
f7d224705f
Trim trailing whitespace in pins.c
2020-08-26 09:01:27 -04:00
microDev
0425305a73
Change microS2 board name
2020-08-26 08:40:46 +05:30
microDev
b019ef2e43
Change microS2 board name
2020-08-26 08:38:42 +05:30
microDev
f1f316c502
Change microS2 board name
2020-08-26 08:37:36 +05:30
microDev
3f699024d9
Change microS2 board name
2020-08-26 08:36:38 +05:30
microDev
1dce6bd7ca
Change microS2 board name
2020-08-26 08:35:09 +05:30
microDev
bf2b594066
Change microS2 board name
2020-08-26 08:33:21 +05:30
Scott Shawcroft
8b71e26abd
Merge remote-tracking branch 'adafruit/main' into native_wifi
2020-08-25 16:39:23 -07:00
Scott Shawcroft
380cbfba55
Add hash to Socket so it can be used in dicts
2020-08-25 16:15:45 -07:00
Scott Shawcroft
69fc872944
Fix espidf.MemoryError print
2020-08-25 16:14:31 -07:00
Lucian Copeland
f71f6631cc
Enable ulab
2020-08-25 14:24:35 -04:00
Lucian Copeland
05bde255f7
Add random to ESP32-S2, fix it on STM32
2020-08-25 14:00:29 -04:00
microDev
89c6a44e4e
Added microS2 specific config files
2020-08-25 20:35:08 +05:30
microDev
645adaadb0
Added microS2 specific config files
2020-08-25 20:32:44 +05:30
microDev
3eea3b5311
Added microS2 specific config files
2020-08-24 11:12:35 +05:30
Scott Shawcroft
f39708abb2
Add PSRAM support to ESP32S2
...
When configured the CircuitPython heap will be on the external RAM.
When not available, the heap will be 48k inside the IDF heap.
2020-08-21 16:20:58 -07:00
Scott Shawcroft
da61845f56
Add missing include
2020-08-21 13:32:59 -07:00
Scott Shawcroft
83deea0e03
Fix copy pasta and stub build
2020-08-21 11:17:42 -07:00
Scott Shawcroft
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
Scott Shawcroft
701e80a025
Make socket reads interruptable
2020-08-21 11:00:02 -07:00
Scott Shawcroft
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
Scott Shawcroft
80b15f6b3b
Add error handling w/temp debug logs
2020-08-19 17:51:33 -07:00
Scott Shawcroft
eb8b42aff1
Add basic error handling
2020-08-19 14:23:28 -07:00
Scott Shawcroft
9602ee6265
Disable wifi debug logging and memory log
2020-08-19 14:23:28 -07:00
Scott Shawcroft
dcc42f6281
Remove debug prints
2020-08-19 14:23:28 -07:00
Scott Shawcroft
1034cc1217
Add espidf module.
2020-08-19 14:23:28 -07:00
Scott Shawcroft
b3a449c276
Turn on json and enable socket.close
2020-08-19 14:23:28 -07:00
Scott Shawcroft
430530c74b
SSL works until it runs out of memory
2020-08-19 14:23:28 -07:00
Scott Shawcroft
eb2c38825e
HTTP works with my adafruit_requests
2020-08-19 14:23:18 -07:00
Scott Shawcroft
c9ece21c28
SocketPool stubbed out
2020-08-19 14:22:13 -07:00
Scott Shawcroft
7bdd243bf6
Ping works!
2020-08-19 14:22:13 -07:00
Scott Shawcroft
3860991111
Ping work and start to add socketpool
2020-08-19 14:22:13 -07:00
Scott Shawcroft
cdab5e793e
Update to latest idf
2020-08-19 14:22:13 -07:00
Scott Shawcroft
c62ab6e09a
Add ipaddress
2020-08-19 14:22:12 -07:00
Scott Shawcroft
ddcff85fa2
Add debugging. Scanning doesn't crash but returns no results. Need to config station.
2020-08-19 14:22:12 -07:00
Scott Shawcroft
1a6f4e0fe0
Scanning WIP. Need to sort out supervisor memory
2020-08-19 14:22:12 -07:00
Scott Shawcroft
c5b8401a15
First crack at native wifi API
2020-08-19 14:21:59 -07:00
Scott Shawcroft
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
Lucian Copeland
dd425ee6c5
Remove breaking parenthesis
2020-08-18 15:54:50 -04:00
Lucian Copeland
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
Lucian Copeland
7078c63062
Add missing Neopixel pin definition
2020-08-14 16:58:24 -04:00
Lucian Copeland
0fc730bc5a
Expand PulseOut API, debug cleanup
2020-08-14 16:36:02 -04:00
Lucian Copeland
88fcc19e24
Add PulseIn
2020-08-14 15:30:48 -04:00
Lucian Copeland
f9512983ff
Add PulseOut
2020-08-14 12:21:41 -04:00
Scott Shawcroft
3197c579e0
Merge pull request #3262 from tannewt/fix_fs_corruption
...
Fix writing sector 0 as the first write.
2020-08-12 08:14:55 -07:00
Scott Shawcroft
8488b31aa0
Init directly
2020-08-11 11:19:40 -07:00
Scott Shawcroft
87c78be8f4
Fix writing sector 0 as the first write.
...
This was the FS issue I saw when debugging wifi and only happens
when the first write is to sector 0. It causes issues because it
blanks all of sector 0 after the first block.
Fixes #3133
2020-08-10 17:14:49 -07:00
Lucian Copeland
d47bd5529c
Fix neopixel macro issue, set default neopixel color
2020-08-10 13:16:20 -04:00
Lucian Copeland
78d049d0f1
Fix pwm reset spew, protect against null reference in led status
2020-08-05 14:05:53 -04:00
Lucian Copeland
14b3b51c58
Rework build flags, prevent idf errors
2020-08-04 18:40:24 -04:00
sabas1080
0e30fe1cc5
Update VID & PID codes
2020-08-02 19:54:11 -05:00
sabas1080
b074f8a161
update for build test
2020-08-02 00:42:36 -05:00
sabas1080
fea1cad02c
add support for Bast Wifi Electronic Cats
2020-08-01 17:51:45 -05:00
Lucian Copeland
94b2561860
Fix include error
2020-08-01 09:22:18 -04:00
Lucian Copeland
1c1df053d5
Add neopixel support
2020-07-31 15:34:12 -04:00
sabas1080
d37326326d
init bastwifi
2020-07-28 00:56:37 -05:00
DavePutz
3dfed3c4aa
Merge pull request #15 from adafruit/main
...
update from main
2020-07-24 20:29:53 -05:00
root
778e8bfda9
Changes to optimization option
2020-07-23 19:27:02 -05:00
Scott Shawcroft
6a46fd5b91
Merge pull request #3185 from hierophect/esp32-pulseio
...
ESP32-S2: PWMOut
2020-07-23 13:11:33 -07:00
Lucian Copeland
cf0a4d208e
Fix unintended timer reset, style changes
2020-07-23 14:01:10 -04:00
Lucian Copeland
61a2e4f94b
Add PWMOut
2020-07-22 16:34:18 -04:00
root
d83a4ac72d
Changes to add compiler optimization option
2020-07-22 12:44:41 -05:00
root
db5c3c9676
dded optimization for esp32s2
2020-07-21 17:54:47 -05:00
root
49decf90c9
Add option for higher optimization levels
2020-07-21 10:11:08 -05:00
Lucian Copeland
207369ec09
Add boilerplate, create basic PWMOut test
2020-07-17 17:28:23 -04:00
Jeff Epler
9cdf5e148a
Merge pull request #2879 from jepler/background-callback
...
Use a linked list of background tasks to perform
2020-07-17 15:46:03 -05:00
Scott Shawcroft
72f6d7ee21
Merge pull request #3155 from jepler/esp32s2-parallel-build
...
esp32s2: Take care to invoke the sub-build-system only once
2020-07-16 11:26:53 -07:00
Jeff Epler
1df48176ce
supervisor: factor supervisor_background_tasks from sundry ports
2020-07-15 11:49:44 -05:00
Jeff Epler
a2919a6fb2
esp32s2: Use the device's EUI-48 address as unique ID
...
On my hardware, esptool reports
MAC: 7c:df:a1:02:6c:b8
after this change, the USB descriptor says SerialNumber: 7CDFA1026CB8
and microcontroller.cpu.id has
>>> "".join("%02x" % byte for byte in microcontroller.cpu.uid)
'c7fd1a20c68b'
Note that the nibble-swapping between USB and cpu.uid is typical.
For instance, an stm32 board has USB SerialNumber
24002500F005D42445632302 but hex-converted microcontroller.cpu.id
420052000f504d4254363220.
2020-07-15 11:45:13 -05:00
Jeff Epler
910f69c42b
esp32s2: Take care to invoke the sub-build-system only once
...
This allows "make -j" in the outer build system to function properly,
with a potentially large decrease in build times on high end desktop
systems.
2020-07-15 10:30:07 -05:00
Diego Elio Pettenò
34b4993d63
Add license to some obvious files.
2020-07-06 19:16:25 +01:00
Jeff Epler
fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
...
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
Scott Shawcroft
367d3800fc
Return false if we already have the lock
2020-07-01 14:35:25 -07:00
Scott Shawcroft
5028804878
Remove fixed pointers and check UART return
2020-06-30 15:29:42 -07:00
Scott Shawcroft
69b3d47564
Fix other esp builds
2020-06-29 18:21:53 -07:00
jerryneedell
bbedd43273
change CMake verision requirement
2020-06-27 13:27:42 -04:00
Scott Shawcroft
7f6bef3251
Remove debug prints
2020-06-26 16:56:17 -07:00
Scott Shawcroft
08749630a2
Fix SPI RX and remove debug prints
2020-06-26 16:30:24 -07:00
Scott Shawcroft
2d579cc995
Use NULL for deinited DigitalInOut
...
This fixes a Display issue where no backlight pin is given but it's
still deinitialized.
2020-06-26 12:33:50 -07:00
Scott Shawcroft
a9f257bcd6
Store host_id so that never reset works
2020-06-26 12:32:56 -07:00
Scott Shawcroft
0f074fb956
Merge pull request #3072 from PTS93/patch-2
...
Update minimum required cmake to 3.16
2020-06-26 10:02:24 -07:00
Timon
a80d7479d0
Update minimum required cmake to 3.16
...
Earliest tested version that compiles.
Failed with version 3.10
2020-06-26 02:04:14 +02:00
Timon
0a41b86f6b
Fix typo inserting IDF_PATH variable
2020-06-26 01:36:03 +02:00
Jeff Epler
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
Scott Shawcroft
03e5043af4
Turn off Idle WDT and speed up CPU
2020-06-24 13:10:31 -07:00
Scott Shawcroft
ed6e81d688
Switch SPI to polling DMA and enable displayio
2020-06-24 13:10:08 -07:00
Scott Shawcroft
496e16d99b
Handle memory (hopefully). Short TX works
2020-06-24 12:47:59 -07:00
Scott Shawcroft
c5fa9730a8
Compiles!
2020-06-24 12:47:59 -07:00
Scott Shawcroft
fc9c0ba573
Initial SPI implementation. Almost certainly doesn't compile
2020-06-24 12:47:59 -07:00
Scott Shawcroft
f52f60b17d
Add UF2 build target
2020-06-24 12:47:59 -07:00
Scott Shawcroft
7b56617f8e
Turn off stub so flash works over native usb
2020-06-24 12:47:58 -07:00
Scott Shawcroft
a26102607e
Add UART support
2020-06-24 12:47:58 -07:00
Scott Shawcroft
6f050d7af3
Add pull up testing, proper us delay and stop supporting 45 and 46 for I2C
2020-06-24 12:47:58 -07:00
Scott Shawcroft
ae52d052cb
Fix I2C thanks to Mark!
2020-06-24 12:47:58 -07:00
Scott Shawcroft
d0401f02a9
Add initial I2C support, not quite working fully though
2020-06-24 12:47:58 -07:00
Jeff Epler
f232aef786
supervisor.mk: Compute USB_DEVICES; remove from boards and ports
...
Since Actions passed on the previous commit, where this computed value
was checked against the specified value (if any), this is no net change,
except that we no longer need to specify it for particular boards or
ports.
2020-06-23 12:59:01 -05:00
Jeff Epler
458eef052e
esp32s2: Disable USB MIDI
...
.. it was not in the USB descriptors anyway (lack of enough endpoints?)
2020-06-23 10:57:25 -05:00
DavePutz
ec7a3feeba
Redid formula for calculating subticks
...
changed subticks calculation to give a range from 0 to 32767.
2020-06-09 10:08:49 -05:00
DavePutz
d8bb2d7c6d
Correct ticks being returned from port_get_raw_ticks()
...
Issue #2958 . Correct calculation of usec back to ticks in port_get_raw_ticks().
2020-06-08 10:52:27 -05:00
Diego Elio Pettenò
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
Scott Shawcroft
2fb4fa3289
Spill registers before scanning the stack.
...
From the change:
// xtensa has more registers than an instruction can address. The 16 that
// can be addressed are called the "window". When a function is called or
// returns the window rotates. This allows for more efficient function calls
// because ram doesn't need to be used. It's only used if the window wraps
// around onto itself. At that point values are "spilled" to empty spots in
// the stack that were set aside. When the window rotates back around (on
// function return), the values are restored into the register from ram.
// So, in order to read the values in the stack scan we must make sure all
// of the register values we care about have been spilled to RAM. Luckily,
// there is a HAL call to do it. There is a bit of a race condition here
// because the register value could change after it's been restored but that
// is unlikely to happen with a heap pointer while we do a GC.
Fixes #2907
2020-05-28 18:34:14 -07:00
Scott Shawcroft
796373b8be
A number of small ESP32S2 fixes:
...
* Fix flash writes that don't end on a sector boundary. Fixes #2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
2020-05-28 15:43:55 -07:00
Scott Shawcroft
a9419b5d46
Update ESP IDF
2020-05-28 15:38:48 -07:00
Scott Shawcroft
2ffd70417d
Merge remote-tracking branch 'adafruit/master' into esp32s2_digitalio
2020-05-26 13:09:57 -07:00
jerryneedell
93df3b89e8
allow PORT specifcation for esp32s2 flashing
2020-05-22 09:54:29 -04:00
Scott Shawcroft
a43876ad1e
Fix esp wrover
2020-05-20 11:37:29 -07:00
Scott Shawcroft
80517c4cf6
First try at critical section support
2020-05-19 17:49:17 -07:00
Scott Shawcroft
49090d1378
Fully implement digitalio and pin-in-use tracking.
...
Fixes #2901
2020-05-19 17:46:29 -07:00
Scott Shawcroft
03b6f7b87b
Add commend about FreeRTOS stack canary
2020-05-18 17:28:13 -07:00
Scott Shawcroft
164628282d
Update TinyUSB and shorten USB task delay
2020-05-18 17:27:49 -07:00
Scott Shawcroft
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
