djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
31,324 Commits 21 Branches 274 Tags 785 MiB
e34e1daabb
Commit Graph

10084 Commits

Author SHA1 Message Date
MicroDev
e30126e335
remove sync from espnow 2023-02-03 11:12:07 +05:30
MicroDev
f100838ae5
remove peers_table from espnow 2023-02-03 10:14:50 +05:30
Dan Halbert
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419 
Correct assignment of RMT channels on ESP32C3
 2023-02-02 17:35:37 -05:00
root
750535d4af Correct assignment of RMT channels on ESP32C3 2023-02-02 14:55:57 -06:00
MicroDev
14c3b52b8d
Merge branch 'main' into espnow 2023-02-03 01:37:07 +05:30
MicroDev
7028a3adfe
rework espnow api 2023-02-03 01:32:28 +05:30
Gregory Neverov
77c6daf4b8 don't throw exception 2023-02-01 16:33:22 -08:00
MicroDev
ae4bb75e29
split espnow between bindings and common-hal 2023-02-01 18:53:58 +05:30
Kamil Tomaszewski
3fdebd4f60 spresense: Add HDR camera support 2023-02-01 12:37:29 +01:00
MicroDev
9c430d45d1
use truthiness of the object itself instead of any 2023-02-01 15:27:55 +05:30
MicroDev
d9d94eacca
run updated pre-commit 2023-02-01 13:38:41 +05:30
Dan Halbert
9ab0733a28
Merge pull request #7530 from BrainBoardz/main 
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
 2023-01-31 23:33:34 -05:00
brainboardz
2656ccffe4 Commit01-31 2023-01-31 19:35:57 -05:00
Dan Halbert
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main 
Update mpconfigboard.h  with LED definition for BPI-Bit-S2.
 2023-01-31 16:08:10 -05:00
Scott Shawcroft
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3 
seeed_xiao_esp32c3 flash mode change to dio
 2023-01-31 11:29:24 -08:00
Jeff Epler
b8d6f20308
Add front buttons as D0/1/2, matching the silk 2023-01-31 10:02:21 -06:00
brainboardz
f3b1ceeb81 Seventh Commit 2023-01-30 20:45:57 -05:00
brainboardz
f71b4bc018 Sixth Commit 2023-01-30 20:32:19 -05:00
brainboardz
e10816f34c Fifth Commit 2023-01-30 20:20:37 -05:00
brainboardz
3f3519e0ab Fourth Commit 2023-01-30 20:10:34 -05:00
brainboardz
7c525fdcb0 Third Commit 2023-01-30 19:54:11 -05:00
brainboardz
34f480d735 Second Commit 2023-01-30 19:03:57 -05:00
brainboardz
d6ebf1bf43 First commit 2023-01-30 17:12:21 -05:00
Wind-stormger
6e31cd0a4f Update mpconfigboard.h 2023-01-30 15:41:42 +08:00
RetiredWizard
dc5cd27555 seeed_xiao_esp32c3 flash mode change to dio 
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
 2023-01-30 02:01:33 -05:00
MicroDev
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8 
Espressif ESP32-S3 DevKitC-1-N32R8
 2023-01-29 10:27:08 +05:30
MicroDev
858e212e34
enable octal flash in sdkconfig 2023-01-29 00:23:02 +05:30
Dan Halbert
7522522a0a
Merge pull request #7501 from pypewpew/pewpewm4-cdc 
pewpew m4: enable CDC back
 2023-01-28 12:00:49 -05:00
Radomir Dopieralski
5b814a4561 pewpew m4: enable CDC back 
CDC got disabled on this board by mistake
 2023-01-28 17:20:22 +01:00
MicroDev
401d160c58
opi flash needs to be flashed in dout 2023-01-28 11:04:21 +05:30
MicroDev
cda5689263
move esp32_camera to espcamera 2023-01-27 22:05:43 +05:30
Scott Shawcroft
a7b12de6ee
Merge pull request #7473 from MicroDev1/espulp 
Add ULP FSM
 2023-01-26 09:57:35 -08:00
MicroDev
9b98d485bb
switch to ReadableBuffer and WriteableBuffer 2023-01-26 14:13:38 +05:30
MicroDev
bfb77d0544
move ULPArch to Architecture 2023-01-26 13:01:14 +05:30
MicroDev
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8 2023-01-26 11:21:43 +05:30
MicroDev
e5cfab060d
remove redundant config messages 2023-01-26 11:20:18 +05:30
MicroDev
90e8f9d4a8
fix espressif 32MB partition table 2023-01-26 11:19:22 +05:30
Dan Halbert
5fb0333aa9
Merge pull request #7478 from jepler/fix-esp32s3-reverse-tft-pid 
Feather ESP32-S2 Reverse TFT: Update PID to match internal list
 2023-01-25 21:24:00 -05:00
Jeff Epler
ace2062564
remove board that will not be manufactured 2023-01-25 15:10:06 -06:00
Dan Halbert
19c1eb2d1d update esp-idf from latest release/v4.4 2023-01-25 15:44:43 -05:00
Scott Shawcroft
f56a6a92f4
Merge pull request #7474 from RetiredWizard/broadcomRTC 
Broadcom port: Add 'fake' RTC support
 2023-01-25 11:33:17 -08:00
MicroDev
9487fb51a4
prettify espressif partition tables 2023-01-25 19:40:14 +05:30
RetiredWizard
ecde85734c Remove a couple unneeded includes. 2023-01-23 15:17:24 -05:00
RetiredWizard
fb4def2824 remove CIRCUITPY_RTC = 1 from mpconfigport.mk 
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
 2023-01-23 14:52:20 -05:00
RetiredWizard
43b1d2618e
Remove erroneous left over comment 2023-01-23 14:19:27 -05:00
Jeff Epler
e018c6d022
Update PID to match internal list 2023-01-23 13:13:27 -06:00
MicroDev
3c10dd8b5f
update espnow api 2023-01-23 23:51:10 +05:30
MicroDev
f15e84de6c
update espnow module 2023-01-23 09:42:39 +05:30
RetiredWizard
4f830f1bbb Fix parameter name and remove unnecessary function 2023-01-21 22:57:52 -05:00
RetiredWizard
3361ec390d Broadcom port: Add 'fake' RTC support 
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
 2023-01-21 22:19:10 -05:00
MicroDev
2bb12293f8
add ulp fsm 2023-01-21 17:44:08 +05:30
MicroDev
7330c638b9
minimal changes to make espnow work 2023-01-20 14:12:55 +05:30
MicroDev
59c3618cbd
clone espnow implementation 
Co-authored-by: Nick Moore <nick@zoic.org>
Co-authored-by: shawwwn <shawwwn1@gmail.com>
Co-authored-by: glenn20 <glenn.moloney@gmail.com>
 2023-01-20 13:19:59 +05:30
Dan Halbert
13338df9f1
Merge pull request #7462 from tannewt/fix_rp2_reset_reason 
Tweak RP2040 reset reason
 2023-01-19 21:10:57 -05:00
Dan Halbert
f826904995
Merge pull request #7468 from DavePutz/issue_6975 
Fixes for microcontroller.on_next_reset() on NRF
 2023-01-19 19:03:46 -05:00
root
a30f69aaed Fixes for microcontroller.on_next_reset() on NRF 2023-01-19 15:58:03 -06:00
Scott Shawcroft
8f9d1e241d
Save watch_for_interrupt_char to espressif too 2023-01-19 10:28:56 -08:00
Scott Shawcroft
dca66eb98c
Watch for ctrl-c over BLE workflow serial 
Before this, it was impossible to interrupt a running program over
BLE.
 2023-01-18 16:28:35 -08:00
RetiredWizard
f66e865510 Use low power RTC on mimxrt10xx (Teensy41) boards 
There are apparently two RTC interfaces in the mimxrt10xx dev
kit. The low power interface access the battery backed up hardware.

I've tested this on the Teensy41 and it seems to
fix issue #4574
 2023-01-17 23:30:36 -05:00
Scott Shawcroft
82a313065e
Tweak RP2040 reset reason 
Watchdogs are used to reboot out of the bootloader. There is a
scratch register for user watchdogs. So use sdk functions to better
distinguish these.

Related to #7346
 2023-01-17 16:12:08 -08:00
Scott Shawcroft
683e393878
Add comments for MDNS code 2023-01-17 14:07:30 -08:00
Dan Halbert
79b76f7bea
Merge pull request #7445 from tannewt/fix_rpi_mdns 
Share the web workflow MDNS object with the user
 2023-01-17 14:46:38 -05:00
Scott Shawcroft
8dffd33bdc
Merge pull request #7458 from MicroDev1/board 
Remove pins reserved for flash on microC3
 2023-01-17 11:08:26 -08:00
Colin B
bfba1e4100 Change common_hal_mcu_processor_set_frequency to void 
* Add warning about setting RP2040 frequency
 2023-01-16 21:26:13 -08:00
MicroDev
cc6dbb3738
Merge pull request #7455 from dhalbert/ensure-nonblocking-socket 
espressif: always make new client sockets be non-blocking
 2023-01-16 10:44:23 +05:30
MicroDev
968d8c5b4b
remove pins reserved for flash on microC3 2023-01-16 10:33:34 +05:30
Dan Halbert
40534da92a espressif: always make new client sockets be non-blocking 2023-01-14 17:02:09 -05:00
Kamil Tomaszewski
d4aab422ee spresense: update SDK to 2.6.0 2023-01-14 20:31:06 +01:00
Dan Halbert
79bd88349e
Merge pull request #7444 from tannewt/fix_start_end_w_arrays 
Have start and end kwargs respect element size
 2023-01-13 20:11:41 -05:00
Scott Shawcroft
ee2fe993dd
Fix repeated MDNS use on Pico W 2023-01-12 14:56:06 -08:00
Scott Shawcroft
5c517b7e5a
Handle MDNS deinited better. 2023-01-12 11:24:20 -08:00
Scott Shawcroft
72f4a8ebbc
Merge pull request #7423 from 0xCB-dev/add-0xCB-Helios 
add support for 0xCB Helios rp2040 controller
 2023-01-11 16:27:36 -08:00
Scott Shawcroft
aa2ba4d88b
Have start and end kwargs respect element size 
The comment says it is `buffer[start:end]` but it assumed elements
were a single byte long. Now it correctly does multibyte elements
from array.array.

Fixes #4988
 2023-01-11 15:36:41 -08:00
Scott Shawcroft
78c2fa5b28
Merge pull request #7437 from dhalbert/improve-type-checking-error-msgs 
Improve type validation error messages, especially for pins
 2023-01-11 10:54:22 -08:00
Dan Halbert
6fdaa78245
Merge pull request #7441 from tannewt/fix_light_sleep_after_deep 
Ignore ESP-IDF wakeup cause when light sleeping
 2023-01-10 20:09:59 -05:00
Dan Halbert
828fd7f445
Merge pull request #7439 from jepler/issue7438 
Update cyw43-driver, fix no-password wifi
 2023-01-10 20:09:38 -05:00
Scott Shawcroft
fbd5f27371
Ignore ESP-IDF wakeup cause when light sleeping 
The IDF's wakeup cause is only for deep sleep. Without ignoring it,
light sleep will wake up too early when done after a deep sleep
wake.

Fixes #7300
 2023-01-10 15:34:15 -08:00
Scott Shawcroft
895cd269b3
Merge pull request #7422 from CDarius/m5stack_stick_c 
Add M5Stack Stick C board
 2023-01-10 14:48:47 -08:00
Jeff Epler
e817563ca0
Update cyw43-driver, fix no-password wifi 
Now, open wifi works on Pico W, so this closes #7438.

For the web workflow it's now OK to either
 * specify an empty password string (as before)
 * not have the CIRCUITPY_WIFI_PASSWORD key at all (new functionality)
 2023-01-10 15:07:17 -06:00
Dan Halbert
a974402542 Improve type validation errors messages, especially for pins 2023-01-10 15:02:55 -05:00
Jeff Epler
7db8f92554 Update some build flags to be more like the original tft feathers 
.. enable camera and use default (better) optimization
 2023-01-10 12:28:51 -06:00
Jeff Epler
af70401aa6 Switch the reverse feathers to use modules with psram 
.. by copying the sdkconfig files from the original s2/s3 tft feathers,
as the module is of the same type.
 2023-01-10 12:18:53 -06:00
Jeff Epler
8f0e72ce2b Merge remote-tracking branch 'origin/main' into feather-esp32-s23-reverse-tft 2023-01-10 12:16:31 -06:00
Colin B
a84a8855ed Add frequency setting for RP2040 boards. 2023-01-07 17:41:37 -08:00
Conor Burns
5aa8419455
add pid.codes VID and PID 2023-01-07 13:11:38 +01:00
RetiredWizard
fa514e22b2 mimxrt10xx gpio pins don't deinit 
It looks like a rogue "return" made it's way into the reset pin code
for the mimxrt10xx port resulting in pin.deinit() not working.
 2023-01-05 19:17:08 -05:00
CDario
a2668cdf0d Added PORT A i2c and slowed down display SPI 2023-01-05 22:30:10 +00:00
Conor Burns
56c0f0388d
add 0xCB Helios 2023-01-05 23:02:00 +01:00
CDario
208fb341e2 Added M5Stack Stick C board 2023-01-05 21:29:02 +00:00
Scott Shawcroft
bb3a1c0a2a
Merge pull request #7153 from fonix232/feature/waveshare_rp2040_lcd_1_28 
feat: Add support for Waveshare RP2040-LCD-1.28
 2023-01-04 10:18:01 -08:00
Dan Halbert
4f78d63905
Merge pull request #7412 from 2231puppy/e-fidget 
Add E-Fidget board
 2023-01-04 12:32:27 -05:00
2231puppy
38ebe90f7c Remove unexposed pins from E-Fidget 2023-01-03 19:24:48 -05:00
2231puppy
bea62030b7 Add E-Fidget board 2023-01-03 16:02:24 -05:00
Jozsef Kiraly
f23a96fa09
Update config with proper USB VID 2023-01-03 20:31:18 +00:00
Jozsef Kiraly
463c8d0f11
Merge pull request #2 from adafruit/main 
Merge main
 2023-01-03 20:28:18 +00:00
Pontus Oldberg
14417a21d1
Merge branch 'adafruit:main' into main 2023-01-03 09:31:49 +01:00
Dan Halbert
3cf947ff8f
Merge pull request #7399 from CDarius/m5stack_atom_matrix 
Added M5Stack Atom Matrix board
 2023-01-02 13:28:04 -05:00
Dan Halbert
6d9d593a0d
Merge pull request #7401 from CDarius/m5stack_atom_echo 
Added M5Stack Atom Echo board
 2023-01-02 13:27:48 -05:00
Dan Halbert
d1cd096813
Merge pull request #7358 from dhalbert/read-only-mac-address-rp2040 
Read only mac address rp2040
 2023-01-02 13:23:28 -05:00
Dan Halbert
637d47b058
Merge pull request #7402 from CDarius/m5stack_atom_u 
Added M5Stack Atom U board
 2023-01-02 13:21:48 -05:00
Dan Halbert
03b43b7b3f complete rework for microcontroller.cpu.frequency and wifi.radio MAC addresses 2023-01-02 11:45:58 -05:00
Dan Halbert
a061729dcc
Update ports/espressif/boards/m5stack_atom_matrix/sdkconfig 2023-01-02 10:41:25 -05:00
Dan Halbert
f5c0996fb7
Update ports/espressif/boards/m5stack_atom_echo/sdkconfig 2023-01-02 10:41:11 -05:00
Dan Halbert
01f6762aa1
Update ports/espressif/boards/m5stack_atom_u/sdkconfig 2023-01-02 10:40:49 -05:00
Dan Halbert
2da4e06890 fix up esp32-camera submodule 2023-01-02 10:13:20 -05:00
Dan Halbert
a3adcf0e1a clarify read-only mac address; reuse translate msgs 2023-01-02 10:13:20 -05:00
Dan Halbert
4e31522d08
Merge pull request #7373 from jaygreco/add_nullbits_bit_c_pro 
Add nullbits Bit-C PRO board
 2023-01-02 09:22:16 -05:00
CDario
4fe00ef74a Added M5Stack Atom U 2022-12-31 06:21:49 +00:00
CDario
dec0b272fe Fixed I2C bus definition 2022-12-30 23:21:46 +00:00
CDario
58e32bd2cb Fixed speacker and microphone pins definition 2022-12-30 23:09:38 +00:00
CDario
52ee5a9272 Added M5Stack Atom Echo 2022-12-30 20:21:00 +00:00
CDario
42195a4a29 Added M5Stack Atom Matrix board 2022-12-30 17:37:37 +00:00
Dan Halbert
ed5d9ac448
Merge pull request #7392 from chukwon/main 
Update pins.c for lolin_c3_mini
 2022-12-30 00:08:39 -05:00
Dan Halbert
e8ee4b220e
Merge pull request #7398 from dhalbert/cache-memory-fence 
Use memory fence when disabling cache to avoid -O2 problems
 2022-12-30 00:08:24 -05:00
Dan Halbert
cc92ce4820 Use memory fence when disabling cache to avoid -O2 problems 2022-12-29 19:49:40 -05:00
Dan Halbert
70b838a42d
Merge pull request #7395 from jepler/fix-getenv_int-dos-newlines 
Fix getenv_int handling of "dos-style" newlines
 2022-12-28 18:32:38 -05:00
Jeff Epler
83bbfd1815
Allow the tests to directly call the non-heap using _int and _str variants 
.. of getenv. These can have their own special bugs.
 2022-12-28 12:36:58 -06:00
chukwon
a932fb3fb1
Update pins.c 
also match lolin_c3_mini pins definition of new version
 2022-12-28 21:25:25 +08:00
RetiredWizard
7a40d449e6 mimxrt10xx/common-hal/UART.C: Fix for bits parameter validation. 
I believe this will resolve issue #7389
 2022-12-27 22:07:54 -05:00
Pontus Oldberg
2b8aa9caae
Merge branch 'adafruit:main' into main 2022-12-27 00:33:47 +01:00
Jeff Epler
928fb0a9c4
Make the "name or service not known" message translatable 2022-12-26 13:58:31 -06:00
Jay Greco
cdefd2e674 Add nullbits Bit-C PRO board 2022-12-25 15:21:32 +00:00
Dan Halbert
0d3b7770d1
Merge pull request #7378 from DavePutz/issue_7325 
Issue 7352 - set max value of a pulsein
 2022-12-24 19:16:44 -05:00
Dan Halbert
88d0eba7f4
Merge pull request #7258 from m1cha1s/ESP32DevKitV1 
Esp32 dev kit v1
 2022-12-24 09:12:45 -05:00
root
94dbefacf1 Issue 7352 - set max value of a pulsein 2022-12-23 19:17:45 -06:00
Pontus Oldberg
4bd5316929
Merge branch 'adafruit:main' into main 2022-12-22 21:28:34 +01:00
evildave666
7cfdd24f77
Change flash mode to dio 2022-12-22 09:30:52 +09:00
evildave666
e80ff20583
Remove IO11 from definition 
It is used internally on this particular board version despite being broken out to a pin and marked on silkscreen.
 2022-12-22 09:29:24 +09:00
Pontus Oldberg
9f266c361b Initializing external flash SPI speed to SPI_FLASH_MAX_BAUDRATE, instead of using driver default speed (32MHz), before probing JEDEC identifier. 2022-12-21 16:33:06 +01:00
Dan Halbert
2a1bb72797
Merge pull request #7359 from tannewt/rework_coproc_api 
Rework the coproc API
 2022-12-20 20:42:53 -05:00
Scott Shawcroft
c16b42e972
Tweak arg checking and comments 2022-12-20 11:00:13 -05:00
Scott Shawcroft
e9f032f468
Merge pull request #7364 from jepler/fix-unix-standard-build 
fix ports/unix builds besides coverage
 2022-12-20 06:54:52 -08:00
Jeff Epler
aa63fae0ae
fix ports/unix builds besides coverage 2022-12-20 07:27:26 -06:00
Neradoc
b36d603cf3 add GP25 as status LED on the Raspberry Pi Pico 2022-12-19 22:11:30 +01:00
Scott Shawcroft
0498b1d2ae
Fix indent 2022-12-19 15:51:34 -05:00
Scott Shawcroft
674f0402a9
Fix ESP32 builds 2022-12-19 15:30:03 -05:00
Scott Shawcroft
f8ac1d9261
Rework the coproc API 
It is now a generic `memorymap` API and an ESP specific `espulp` module.

Fixes #7218. Fixes #3234. Fixes #7300.
 2022-12-19 14:08:38 -05:00
root
aac324c4d1 added frozen modules, changed to 8BM FLASH 2022-12-18 22:49:28 +00:00
Dan Halbert
77a98e6107
Merge pull request #7355 from pypewpew/esp32-camera-xclk 
esp32-camera: make the master_clock_pin really optional
 2022-12-17 21:15:31 -05:00
Radomir Dopieralski
90c805d858 esp32-camera: make the master_clock_pin really optional 
The master_clock_pin was already optional, but not specifying it would
result in a crash. This fixes it, so it really can be omitted, when the
camera module has its own clock source built in.
 2022-12-16 21:53:50 +01:00
Dan Halbert
66efed5ba5 fix AuthMode printing regression 2022-12-15 15:49:58 -05:00
Scott Shawcroft
c6ea3e803a
Merge pull request #7345 from dhalbert/mimx-fix-build 
redo pin never resetting for mimxrt10xx
 2022-12-15 12:21:21 -08:00
Dan Halbert
b90a6413c2 refactor to reduce duplicate code 2022-12-15 13:17:28 -05:00
Dan Halbert
5c569f03c2 redo pin never resetting for mimxrt10xx 2022-12-14 19:34:26 -05:00
Jeff Epler
297657ea9a
Refactor so that all sites of name lookup failure result in gaierror 2022-12-14 14:45:32 -06:00
Dan Halbert
398b7c26ca
Merge pull request #7321 from jepler/dotenv-becomes-toml 
Dotenv becomes toml
 2022-12-13 19:56:36 -05:00
Dan Halbert
369507e1da cxd56 was not using SRC_SHARED_MODULE_INTERNAL 2022-12-13 18:39:25 -05:00
Jeff Epler
56d4f8f552
can't use object-based calls at this time 2022-12-13 11:32:33 -06:00
Jeff Epler
d49af4d784
make wording a bit clearer 2022-12-13 08:11:47 -06:00
Pontus Oldberg
aa5b1e063f Added new RP2040 board with integrated SD/Card reader and RTC 2022-12-13 13:34:28 +01:00
Jeff Epler
adff93c61a
Mark cyw43 pins "never reset" before reset_port 
reset_port calls reset_all_pins, which disables the built-in pull
down. In theory, this could allow some CYW43 interfacing pin to float
to an inappropriate value. There's no proof of this! but the move can't
really hurt, either
 2022-12-12 20:14:08 -06:00
Jeff Epler
90894014a2
Use the HW LED as status indicator 
For me this made a rare startup failure stop, which is nonsense.
 2022-12-12 19:43:10 -06:00
Jeff Epler
31fd7cb51b
Merge remote-tracking branch 'origin/main' into dotenv-becomes-toml 2022-12-11 11:06:51 -06:00
Pontus Oldberg
66eca9c35e Updated formatting. 2022-12-11 17:25:26 +01:00
Pontus Oldberg
f7e735b492 Added LDO control pin, new flash variants and support functions for the LDO control pin. 2022-12-11 17:11:24 +01:00
Pontus Oldberg
9ef5b7d118 Merge branch 'main' of https://github.com/PontusO/circuitpython 2022-12-11 13:02:03 +01:00
Pontus Oldberg
da413094f8 Added LDO control pin and initial setup 2022-12-11 13:01:00 +01:00
Jeff Epler
2bf5d2bc07
Merge remote-tracking branch 'origin/main' into dotenv-becomes-toml 2022-12-10 15:39:50 -06:00
Jeff Epler
dd6dd5df21
rework the getenv test again 
* use a virtual fat filesystem during the test
 * this makes the file I/O part more closely patch runtime which is nice
 * side-steps the need to add a special function for testing
   * but test still can't be run on a device, because the vfs calls
     are incompatible, and you intentionally can't remount "/" anyway
 * and side-steps problems with storing 'bad' toml files
 2022-12-10 12:58:08 -06:00
Jeff Epler
3ab71d7448
Rename test function, make 'bad' files binary & add another test 2022-12-09 15:23:56 -06:00
Jeff Epler
6dca9db225
Rename test function & fix a bug with default value handling 2022-12-09 14:35:50 -06:00
Jeff Epler
1f504e5c0f
Remove line accidentally duplicated 2022-12-09 14:15:00 -06:00
Jeff Epler
44f15d563d
Rename "environ" errors to "getenv" errors 2022-12-09 14:14:53 -06:00
Jeff Epler
678a466d1a
alphabetize 2022-12-09 14:12:43 -06:00
Jeff Epler
3a92c079fc
Finish renaming os_environ_get_key to os_getenv 
.. for consistency.
 2022-12-09 14:07:23 -06:00
Jeff Epler
3cb628d290
fix nrf build 2022-12-08 16:45:58 -06:00
Dan Halbert
4fa0c4d108
Merge pull request #7320 from dhalbert/seeed-xiao-nrf52840-charge-rate-pin 
Add pin for charge rate for Seeed XIAO nRF52840 Sense
 2022-12-08 16:51:26 -05:00
Jeff Epler
3459fe322b
Withdraw the _environ module 
This existed solely for testing, so expose it a different way during
the unix coverage build

Also turn off os.getenv support on samd21.
 2022-12-08 15:33:10 -06:00
Jeff Epler
243ecc2502
remove debugging prints 2022-12-08 14:18:22 -06:00
Jeff Epler
170918995c
fix mistaken code formatting 
I wanted to use the idiom
```c
#if GUARD
if (condition) {
    alternate code
} else
#else
{
    common default code
}
```
idiom, in which the common default code is conditioned both on a
compile-time check and a run-time check. However, I got it wrong
and uncrustify chipped in, adding extra brackets around a following
piece of code and re-indenting it.
 2022-12-08 14:16:53 -06:00
Dan Halbert
4e7d65251f Add pin for charge rate for Seeed XIAO nRF52840 Sense 2022-12-08 14:09:44 -05:00
Jeff Epler
1fe05cb8cd
pico w: re-use previous connection if ssid matches 2022-12-08 12:44:34 -06:00
Jeff Epler
ef2bfdb5db
dotenv becomes settings.toml 2022-12-08 12:44:20 -06:00
RetiredWizard
68d510cb2f
Update mpconfigboard.h 
Configure LED pin for STATUS display and to prevent ESP floating pins from constantly lighting led dimly.
 2022-12-07 23:00:09 -05:00
Dan Halbert
295f7b490f
Merge pull request #7313 from jepler/cyw43-additional-delay 
Add an additional large delay time at start for pico w boards
 2022-12-07 19:17:45 -05:00
Dan Halbert
44af05283a
Merge pull request #7291 from jepler/issue6502 
Ensure orderly shutdown of ssl socket
 2022-12-07 19:12:12 -05:00
Jeff Epler
2326b49b24
switch this header to 'pragma once' since I'm touching it already 2022-12-07 15:14:54 -06:00
Jeff Epler
a1dd8405f4
use a more standard method of forward-declaring the structure 2022-12-07 15:14:30 -06:00
Jeff Epler
ff8d051eff
Add an additional large delay time at start for pico w boards 2022-12-07 15:10:13 -06:00
Dan Halbert
676e40d62f
Merge pull request #7311 from dhalbert/esp32-box-lite-sdkconfig 
make esp32-box-lite sdkconfig same as box
 2022-12-06 21:31:45 -05:00
Dan Halbert
3965ef9c2a make esp32-box-lite sdkconfig same as box 2022-12-06 19:27:00 -05:00
Scott Shawcroft
b354cec8cb
Three small ESP web workflow fixes 
* Set nonblock on all accepted sockets. Not just ones for user code.
* Close an open websocket if another is accepted.
* Set debug level to INFO rather than DEBUG because DEBUG crashes
  on ESP32-S3 USB OTG.
 2022-12-06 11:49:04 -08:00
Scott Shawcroft
ac239c0fb3
Merge pull request #7306 from evildave666/add-luatos-core-esp32c3 
Add Luatos Core ESP32C3 Board
 2022-12-05 13:27:08 -08:00
Scott Shawcroft
d7874e65c2
Merge pull request #7299 from BooleanMattock/main 
Fix to Issue #7224 - Servo update slow due to PWM channel duty cycle update busy-wait
 2022-12-05 12:54:41 -08:00
evildave666
eaf39b4c10
Update pins.c 2022-12-05 16:40:36 +09:00
evildave666
14b430ed35
Fix pre-commit issues 2022-12-05 16:35:48 +09:00
evildave666
5b6f06d84c
Add additional files 2022-12-05 16:08:12 +09:00
evildave666
05a8bf8c38
Create board.c 2022-12-05 16:06:50 +09:00
BooleanMattock
afb5301cef Fix to Issue #7224 - tested 2022-12-02 20:21:40 -05:00
Scott Shawcroft
4c064c263e
Merge pull request #7294 from tannewt/analogbufio_rework 
Rework the analogbufio API.
 2022-12-02 14:53:16 -08:00
Scott Shawcroft
f7504ff857
Tweaks based on review comments 2022-12-02 10:19:31 -08:00
Dan Halbert
6e40949f6e
Merge pull request #7295 from tannewt/fix_mdns_conflict 
Fix MDNS hostname mangling
 2022-12-02 11:13:07 -05:00
m1cha1s
b5dda0b770 Removed esp32_devkit_v1 folder 2022-12-02 14:26:46 +01:00
Jeff Epler
ddc56f5fdf
Merge pull request #7101 from bill88t/picow-ap 
Attempt at pi cow ap
 2022-12-01 19:55:17 -06:00
Scott Shawcroft
ded0ee4816
Fix MDNS hostname mangling 
cpy-MAC hostnames were being mangled on circuitpython.local
conflicts.

Fixes #6869
 2022-12-01 17:54:41 -08:00
Scott Shawcroft
255e997345
Rework the analogbufio API. 
* read() is now readinto() and takes the buffer to write into.
* readinto() returns the number of valid samples.
* readinto() can be interrupted by ctrl-c.
* readinto() API doesn't support signed numbers because it never did.
* sample_rate is now required in the constructor because supported
  values will vary per-port.
* 16 bit values are full range. 12 bit samples from RP2040 are stretched
  in the same way they are for AnalogIn.

Fixes #7226
 2022-12-01 17:46:07 -08:00
Jeff Epler
7583ccad2a
Ensure orderly shutdown of ssl socket 
A crash would occur if an SSL socket was not shut down before
`gc_deinit()`.

I do not fully understand the root cause, but some object deinitialization
/ deallocation prior to `gc_deinit` leaves the SSL object in an
inconsistent state.

Rather than resolve the root cause, instead ensure that the closing of
the user socket also closes the SSL socket.

Closes: #6502
 2022-12-01 19:29:20 -06:00
Dan Halbert
082b0d1aed
Merge pull request #7191 from jepler/fastpixelmap 
Add a fast PixelMap-like class
 2022-12-01 11:43:00 -05:00
Dan Halbert
b41f7460b7
Merge pull request #7181 from jepler/more-string-qstr-savings 
More space savings
 2022-11-30 21:36:07 -05:00
Bill Sideris
3fb4fd81e9
Revert "debug_dhcp to follow general debug" 2022-11-30 22:44:18 +02:00
Jeff Epler
ed33f65fd9
move define to proper place 2022-11-30 14:39:52 -06:00
Jeff Epler
c46e219795
Having an input-only pin is rare, save a string on other ports 2022-11-30 14:39:49 -06:00
Bill Sideris
0738d50834
debug_dhcp to follow general debug 2022-11-30 22:24:21 +02:00
Dan Halbert
845b68c351
Merge pull request #7204 from jepler/build-python3x 
return to using python 3.x for builds
 2022-11-30 15:18:29 -05:00
Bill Sideris
f8070d2141
Change comment, and logic on dhcpserver 2022-11-30 21:51:50 +02:00
m1cha1s
d904d8e9a0 Renamed the board folder to doit_esp32_devkit_v1 2022-11-30 20:26:41 +01:00
Jeff Epler
beb053a94d
more thoroughly disable UART when 2022-11-30 12:06:19 -06:00
Jeff Epler
e489b73d88
update esp-idf to merge commit 2022-11-30 12:04:47 -06:00
Bill Sideris
44d5326d4c
fix picow-ap 2022-11-30 19:36:00 +02:00
Bill Sideris
362018dcca
Merge branch 'main' into picow-ap 2022-11-30 19:11:03 +02:00
Dan Halbert
2f5ec1cab0
Merge pull request #7281 from jepler/esp32-trailing-dot 
handle domain with trailing dot
 2022-11-30 11:18:47 -05:00
Dan Halbert
c8390a7918
Merge pull request #7069 from jepler/exception-chain 
Implement chained exceptions
 2022-11-30 11:13:57 -05:00
Jeff Epler
286efc18fc
handle domain with trailing dot 
Closes: #7032
 2022-11-30 09:29:21 -06:00
Scott Shawcroft
a8c70aa7bd
Fix S3 deep sleep 
Adding `-u ld_include_highint_hdl` forces the linker to keep the
high priority interrupt handler that calls the ipc_isr handler.

The deep sleep is waiting for this interrupt to be handled on core
0 before sleeping from core 1.

Fixes #6090
 2022-11-29 17:20:38 -08:00
Jeff Epler
49ac82564c
Merge pull request #7278 from jepler/sdcardio-failures 
Sdcardio failures
 2022-11-29 15:13:53 -06:00
Jeff Epler
4af95f1cb1
atmel-samd: Ensure sdioio.SDCard pins are released 2022-11-29 13:45:18 -06:00
Jeff Epler
8e83f36c36
SAM E54 Xplained devkit hardfaults at start with -O2 
I don't know why, but other samd5x are using -Os too, see the block above.

Closes: #7277
 2022-11-29 13:05:39 -06:00
Scott Shawcroft
c13ca95da1
Add MDNS support to Pico W 
This adds both cpy-MAC.local and circuitpython.local support.

Fixes #7214
 2022-11-28 16:15:28 -08:00
Scott Shawcroft
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow 
Enable* web workflow for Pico W
 2022-11-28 14:19:42 -08:00
m1cha1s
680e56c52a Changed creator id 2022-11-25 14:09:35 +01:00
m1cha1s
26fbb25653 Fixed formatting 2022-11-25 13:55:06 +01:00
m1cha1s
fb46e7c4d8 Defined esp32 board for the esp32 devkit v1 2022-11-25 12:13:44 +01:00
foamyguy
c6ca2bdd59 disable pixelmap on bluemicro833 2022-11-24 09:09:48 -06:00
Dan Halbert
79f4344860 fix playing mono files on stereo output 2022-11-23 22:11:41 -05:00
Scott Shawcroft
30563655d7
Merge pull request #7249 from dhalbert/wifi-connect-ap-api 
correct Radio.connect() and .start_ap() signatures; clean up some code
 2022-11-23 10:29:05 -08:00
Dan Halbert
17be447c4b correct Radio.connect() and .start_ap() signatures; clean up some code 2022-11-22 17:11:03 -05:00
Dan Halbert
6d022733b3
Merge pull request #7162 from rhooper/boards-list 
add boards list to make error message
 2022-11-21 23:18:37 -05:00
foamyguy
19f1119994 Merge branch 'main' into fastpixelmap 
# Conflicts:
#	shared-module/adafruit_pixelbuf/PixelBuf.c
 2022-11-21 20:25:58 -06:00
Scott Shawcroft
c3a96a63c0
Enable* web workflow for Pico W 
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.

Progress on #7214
 2022-11-21 16:24:05 -08:00
Bill Sideris
b40facd0b4
Error msg changes 2022-11-22 01:00:34 +02:00
Dan Halbert
df0150ff0e Add common settings to sdkconfig-esp32c3.defaults 2022-11-21 15:15:26 -05:00
Dan Halbert
85a83b8150 Simplify some ESP32-C3 board sdkconfig files 2022-11-21 12:35:10 -05:00
Dan Halbert
d4834cb7ec
Merge pull request #7234 from jepler/espressif-uart-console-break 
Interrupt on UART 'break'
 2022-11-19 14:46:18 -05:00
Dan Halbert
96fc85cd18
Merge pull request #7229 from dhalbert/rp2040-spi-mode-3 
RP2040: have clock start high when SPI polarity high
 2022-11-19 14:32:02 -05:00
Jeff Epler
4e0f8e7fcd
Interrupt on UART 'break' 
Tested and working with the CH9102F USB converter on Adafruit's
Feather ESP32 V2 (& tio as the software on the host computer)

Closes: #7233
 2022-11-19 10:57:21 -06:00
Dan Halbert
1611cf98da have clock start high in SPI mode 3 2022-11-18 18:27:38 -05:00
Bill Sideris
88bd9ef6b8
just change the ap error 2022-11-18 22:51:05 +02:00
MicroDev
7c51201e88
fix nRF build directory naming 2022-11-19 00:23:03 +05:30
MicroDev
c3c1717813
refactor common port specific Makefile code 2022-11-18 23:00:28 +05:30
MicroDev
e2a3597263
add awesome new make error message 
Copied from initial implementation on atmel-samd

Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
 2022-11-18 11:27:23 +05:30
MicroDev
3a418379d3
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8 2022-11-18 09:40:20 +05:30
Bill Sideris
b8cd6c093f
picow-ap progress 2022-11-17 21:47:39 +02:00
Neradoc
f9f1edbb08 setup PWM status LED on aithinker ESP32-C3 boards 2022-11-17 20:32:50 +01:00
Dan Halbert
be53193dde
Merge pull request #7219 from tannewt/c3_pwm_in_use 
Fix PWM status LED never_reset
 2022-11-17 13:59:47 -05:00
Bill Sideris
a234b74e87
Merge branch 'adafruit:main' into picow-ap 2022-11-16 21:32:46 +02:00
Scott Shawcroft
6689b9ad09
Merge pull request #7208 from domdfcoding/weact_pico_16mb 
Add support for the 16MB WeAct Studio Pico
 2022-11-16 09:59:37 -08:00
Scott Shawcroft
a4bd7721e9
Merge pull request #7217 from dhalbert/samd21-tick-event 
samd21: port_disable_tick() should disable event channel
 2022-11-16 09:05:48 -08:00
Dan Halbert
b74893eb07 samd21: port_disable_tick() should disable event channel 2022-11-15 21:52:12 -05:00
Jeff Epler
12545fb060
Add prototype feather esp32s2/s3 reverse tft board definition 
This is not final hardware and may change!
 2022-11-15 20:22:20 -06:00
Scott Shawcroft
8e4e84c58b
Match channel number, not timer number 2022-11-15 16:51:47 -08:00
Scott Shawcroft
93ee54a2fb
Fix PWM status LED never_reset 
It doesn't need never reset because the status LED is only active
when user code isn't.

This also fixes PWM never reset on espressif so that deinit will
undo it.

Fixes #6223
 2022-11-15 16:14:31 -08:00
Jeff Epler
ef34378b1d
Merge pull request #7201 from jepler/rp2040-light-sleep 
raspberrypi: Make port_idle_until_interrupt work
 2022-11-15 17:25:48 -06:00
Jeff Epler
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug 
Fix pi cow debug compilation
 2022-11-15 14:08:44 -06:00
Jeff Epler
412df210ad
Merge remote-tracking branch 'origin/main' into build-python3x 2022-11-15 14:02:09 -06:00
Scott Shawcroft
b8a2d3ffdc
Merge pull request #7212 from dhalbert/stm-pwm-fix 
STM: off-by-one TIMx reference; other code cleanup and minor fixes
 2022-11-15 11:50:53 -08:00
Dan Halbert
11dcd69f2c
Merge pull request #7207 from jepler/nicer-pin-checking 
shared-bindings: Get rid of CYW43 special cases in shared-bindings
 2022-11-14 23:35:26 -05:00
Bill Sideris
6954e569b7
since it ain't leaving.. 2022-11-15 00:05:01 +02:00
Bill Sideris
fde1c05e6d
Revert "remove lwip_src" 
This reverts commit 398e9122a0.
It fails on LINK without them.
 2022-11-14 20:03:41 +02:00
Dan Halbert
fdeaf805d3 STM: off-by-one TIMx reference; other code cleanup and minor fixes 2022-11-14 13:00:32 -05:00
Bill Sideris
398e9122a0
remove lwip_src 2022-11-14 19:33:06 +02:00
Bill Sideris
6ad61a3fd1
Radio.c work 2022-11-14 19:31:18 +02:00
Jeff Epler
14b20087b5
only ignore sdkconfig* files in the espressif port's top directory 
danh and microdev1 noticed that this ignore pattern was over-broad
and caused added sdkconfig files in boards/ (which should be committed)
to be ignored and not proposed for addition by common tools like
git status, git gui, etc.

This pattern anchors the search so that it only matches in the
ports/espressif directory, so ports/espressif/sdkconfig is ignored
but ports/espressif/boards/example/sdkconfig is not ignored anymore
 2022-11-14 11:29:18 -06:00
Bill Sideris
2e6dd1bf1f
Radio.c no longer needs ping.h 2022-11-14 18:36:42 +02:00
Jeff Epler
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings 
.. by moving it into a new weak function that can be replaced
just by the picow build.
 2022-11-14 08:44:08 -06:00
Dominic Davis-Foster
e1046b1050
Add support for the 16MB WeAct Studio Pico 2022-11-14 14:04:07 +00:00
Dan Halbert
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor 
Add ability to read VOLTAGE_MONITOR on Pico W
 2022-11-13 22:40:54 -05:00
Jeff Epler
f3169246ba
Implement chained exceptions 
This adds the __cause__, __context__ and __suppress_context__
members to exception objects and makes e.g., `raise exc from cause`
set them in the same way as standard Python.
 2022-11-13 19:52:50 -06:00
Jeff Epler
b8f5def985
return to using python 3.x for builds 2022-11-13 09:26:49 -06:00
Dan Halbert
6e9909c65e
Merge pull request #7198 from CRCibernetica/crcibernetica-ideaboard 
Add new board crcibernetica-ideaboard
 2022-11-13 09:12:43 -05:00
root
43566dec5b allow inclusion of board while blocking build files 2022-11-13 12:13:32 +00:00
Dan Halbert
c96208902f
Merge pull request #7199 from MicroDev1/espressif 
Enable `microcontroller.cpu.temperature` on esp32s3
 2022-11-12 11:16:45 -05:00
Jeff Epler
e4d620f055
make whitespace match 2022-11-12 09:17:52 -06:00
Jeff Epler
78fc43baab
raspberrypi: Make port_idle_until_interrupt work 
This needs thorough testing before it's merged, as we tried
and reverted this once before (#5341 and #5356).

I think that besides checking for tinyusb having "something to do",
the fact that `port_interrupt_after_ticks` and `port_disable_tick`
weren't implemented that was causing a secondary problem.

I've tested this on a pico w over reboot-cycles and ctrl-c-cycles,
with and without drive automounting, with and without serial repl open,
and on a power-only connection.

I didn't notice the problem reported in #5356 after merely implementing
port_idle_until_interrupt; but I did notice that sleeps in general would
take over-long until "something" (like writing to the USB drive) happened;
I think "something" was probably calling port_enable_tick(). When this
problem was happening, sleeps would take a lot longer; for instance,
`sleep(.001)` would take about 1/20s and `sleep(.1)` would take about 1/7s.
 2022-11-12 09:16:41 -06:00
Dan Halbert
9e94d7e758
Merge pull request #7196 from dhalbert/rp2-pin-alarm-race 
RP2040: ignore pin changes before deep sleep
 2022-11-12 09:36:15 -05:00
MicroDev
512cda8b73
enable microcontroller.cpu.temperature on esp32s3 2022-11-12 10:03:00 +05:30
root
6c3b9b64da add crcibernetica-ideaboard 2022-11-12 03:22:15 +00:00
Dan Halbert
983502d6e3 ignore pin changes before sleep 2022-11-11 15:31:49 -05:00
Jeff Epler
f5c637dc10
Add adafruit_pixelmap.PixelMap 
.. a fast helper for animations. It is similar to and inspired by the
PixelMap helper in Adafruit LED Animation library, but with an extremely
fast 'paste' method for setting a series of pixels. This is a common
operation for many animations, and can give a substantial speed improvement.

It's named `adafruit_pixelmap` so that we can package a compatible version
in pure Python for systems that can't fit it in C in flash, or for
Blinka.

This is a proof of concept and can make a very fast comet animation:
```python
import time
import adafruit_pixelbuf
import adafruti_pixelmap
import board
import neopixel
from supervisor import ticks_ms
from adafruit_led_animation.animation.solid import Solid
from adafruit_led_animation import color

pixel_pin = board.GP0
pixel_num = 96

pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB")

evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2)))
odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4))
print(odd_indices)
odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices)
assert len(odds) == len(odd_indices)


comet_length = 16

comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4)
        for i in range(comet_length)]
comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4)
        for i in range(comet_length)]

pos1 = 0
pos2 = 96//4

while True:
    evens.paste(comet1, pos1, wrap=True, reverse=False, others=0)
    pos1 = (pos1 + 1) % len(evens)

    odds.paste(comet2, pos2, wrap=True, reverse=True, others=0)
    pos2 = (pos2 - 1) % len(odds)
    pixels.show()

    m = ticks_ms()
    if m % 2000 > 1000:
        time.sleep(.02)
```
 2022-11-11 07:54:33 -06:00
Bill Sideris
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c 
u32_t -> uint32_t

Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
 2022-11-11 14:40:47 +02:00
Bill Sideris
0bf9df232a
fix debug 2022-11-11 14:17:57 +02:00
dronecz
a37c36c383
Merge branch 'adafruit:main' into main 2022-11-10 21:47:23 +01:00
paul-1
11f1174658
picow: Change init to use country code routine.....place holder for future improvements to allow country code setting. 2022-11-10 17:24:09 +02:00
paul-1
851c2cd8cb
picow: Add channel setting when starting AP 2022-11-10 17:23:59 +02:00
paul-1
8fdb2df0bf
picow: enable dhcpserver for apmode. 2022-11-10 17:23:38 +02:00
Bill Sideris
25c0a0aca9
Merge branch 'adafruit:main' into picow-ap 2022-11-10 17:04:21 +02:00
Dan Halbert
d90bc1760f
Merge pull request #7188 from kylemccreery/pillbug 
Add new board PillBug
 2022-11-10 09:10:40 -05:00
Kyle McCreery
1f332e7007 Adding pillbug initial commit 2022-11-09 23:15:38 -05:00
Dan Halbert
e6936decac
Merge pull request #7169 from blues/pdmin 
STM32L4 PDMIn support
 2022-11-09 14:19:51 -05:00
dronecz
11ce074318
Update mpconfigboard.mk 2022-11-08 23:43:13 +01:00
Matthew McGowan
97f693d2d8 docs(swan_r5): updated copyright notices 2022-11-08 14:18:54 -08:00
Matthew McGowan
843d6b42f9 formatting(swan_r5): lexicographically sorted the board module names in the swan_r5 makefile include [ci-skip][skip-ci]. Skip CI since this is a cosmetic change only. 2022-11-08 12:04:30 -08:00
Jeff Epler
7f36a365cf
delay 100us for analog voltage to stabilize 
.. otherwise, depending on the prior state of the pin as a digital
input, the value read could be 20% low.
 2022-11-08 10:43:14 -06:00
Jeff Epler
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W 
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.

Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.

Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.

```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```

Closes: #7020
 2022-11-08 09:37:15 -06:00
dronecz
28e4834da8
Merge branch 'adafruit:main' into main 2022-11-08 01:02:46 +01:00
dronecz
a568a5c2e2
Rename sdkonfig to sdkconfig 2022-11-06 22:14:19 +01:00
dronecz
f1e658f8bb
Update sdkonfig 2022-11-06 22:07:12 +01:00
Jeff Epler
452ebe27ae
socketpool: make socket objects selectable 
.. which will lead to them being usable in async contexts, pending
relevant changes in asyncio
 2022-11-05 12:05:19 -05:00
Matthew McGowan
ad9db01f5f Implements PDMIn for STM32L4 using the SAI peripheral and decimation/filtering in software. 2022-11-04 17:27:08 -07:00
Petr Sedlacek
f3ec46bbb5 Add missing pin definitions for 42. Keebs Frood 2022-11-04 15:33:16 +01:00
dronecz
882100a87a
Create sdkonfig 2022-11-02 22:10:44 +01:00
dronecz
71b5e6088b
Update mpconfigboard.mk 2022-11-02 22:07:28 +01:00
dronecz
d6fe378456
Update mpconfigboard.h 2022-11-02 22:05:39 +01:00
Jeff Epler
403a5b2681
Merge pull request #7126 from jepler/scorpio 
add feather rp2040 scorpio
 2022-11-02 14:47:40 -05:00
Rose Hooper
8933f93439 simplify and use columns for boardlist 2022-11-01 11:00:48 -04:00
Rose Hooper
36c4cc7d30 fix output layout of board list 2022-11-01 00:18:46 -04:00
Rose Hooper
dec128f508 add boards list to make error message 2022-10-31 23:57:59 -04:00
dronecz
9b1181804c
Merge branch 'adafruit:main' into main 2022-10-30 19:16:05 +01:00
dronecz
468709abcc
Update pins.c 
Hopefully last change nefore merge.
 2022-10-30 18:51:46 +01:00
Dan Halbert
952812cdea
Merge pull request #7154 from dhalbert/alarm-lifetime 
Save wake alarm info in static storage, simplifying recording of alarm
 2022-10-30 12:28:50 -04:00
dronecz
ae8f415bd5
Update board.c 2022-10-30 02:17:38 +02:00
Neradoc
0aa41fa92e change BOARD_USER_SAFE_MODE_ACTION into a separate sentence 2022-10-30 01:55:42 +02:00
Neradoc
934d2a7004 remove duplicate press boot button, it's already the default 2022-10-30 01:52:17 +02:00
dronecz
5d7c58da5d
Update pins.c 
Attempt to fix build issue
 2022-10-30 01:52:09 +02:00
Dan Halbert
ded134c346 store wake_alarm in a static object 2022-10-29 16:26:36 -04:00
Jozsef Kiraly
992e97d84b fix: pre-commit 2022-10-29 20:00:37 +01:00
Jozsef Kiraly
9ca057385a feat: Add support for Waveshare RP2040-LCD-1.28 2022-10-29 18:52:43 +01:00
Dan Halbert
a064b52ad7
CIRCUITPY_ESP32_CAMERA, not CIRCUITPY_USB_CAMERA 2022-10-29 10:13:11 -04:00
Dan Halbert
2ffd16a10c
Update mpconfigboard.mk 2022-10-29 09:27:09 -04:00
CDario
19fd9107a2 Merded with main branch 2022-10-29 07:46:54 +00:00
CDarius
7282bd9c9a
Removed boilerplate already handled by MP_WEAK definitions 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-10-29 09:34:45 +02:00
Dan Halbert
053d0fa8b5
Merge pull request #7145 from chukwon/fix_lolin_s3 
fix and add lolin_s3 pins definition
 2022-10-28 23:50:53 -04:00
Dan Halbert
d95a085be4
Merge pull request #7144 from CDarius/add_m5stack_core_safe_mode 
Added safe mode button and fix coyright attribution
 2022-10-28 15:59:59 -04:00
Dan Halbert
0221cc8df7 Merge remote-tracking branch 'adafruit/main' into alarm-lifetime 2022-10-28 14:11:32 -04:00
chukwon
9c66320474 fix and add lolin_s3 pins definition 2022-10-28 21:40:35 +08:00
Dan Halbert
4e20049c38
Merge pull request #7122 from jepler/picow-ssl-server 
pico w: implement sslsocket bind, listen, accept
 2022-10-28 09:33:21 -04:00
CDario
b815a4cc5e Added safe mode button and fix coyright attribution 2022-10-28 12:06:11 +00:00
CDario
27142d090b Fixed copyright attribution 2022-10-28 11:08:30 +00:00
microDev
9a09c62eee
espressif add back ESP32_CAMERA 2022-10-28 13:55:33 +05:30
CDario
b276ed7af9 Fixed copyright attribution 2022-10-28 05:32:09 +00:00
CDario
b94447fde5 Added safe mode button 2022-10-28 05:00:54 +00:00
Dan Halbert
9307b62ad5 wip 2022-10-27 22:42:04 -04:00
Dan Halbert
8fe44a23d2
Merge pull request #7140 from dhalbert/esp32-s3-box-spiram-fix 
correct SPIRAM settings for ESP32-S3-BOX
 2022-10-27 16:09:59 -04:00
Dan Halbert
26688fa826 correct SPIRAM settings for ESP32-S3-BOX 2022-10-27 14:45:29 -04:00
MicroDev
baa44a2dba
Merge pull request #7133 from CDarius/fix_m5stack_core_basic 
Fixed wrong configuration in sdkconfig
 2022-10-27 18:34:07 +05:30
dronecz
d774f3d34f
Update board.c 
Fix for CLI
 2022-10-27 15:02:44 +02:00
dronecz
0e0c106740 Add Maker badge board 2022-10-27 01:06:38 +02:00
CDario
cdbad53649 Fixed wrong configuration in sdkconfig 2022-10-26 20:06:27 +00:00
CDario
be07722bbc Added board M5Stack Atom Lite 2022-10-26 19:57:23 +00:00
Dan Halbert
ca25016b52
Merge pull request #7119 from jepler/picow-reuseaddr 
Enable, use SOF_REUSEADDR
 2022-10-26 15:25:50 -04:00
Dan Halbert
5ebdf281cb
Merge pull request #7125 from dhalbert/esp-pin-alarm-fix 
Fix setup of Espressif PinAlarms
 2022-10-26 15:24:58 -04:00
Jeff Epler
7545e02a8e
add feather rp2040 scorpio 2022-10-26 10:05:37 -05:00
Jeff Epler
366cf4a048
Merge pull request #7113 from CDarius/m5stack_core_fire 
Added M5Stack Core Fire board
 2022-10-26 09:10:50 -05:00
Jeff Epler
0bc986ea7a
Merge pull request #7124 from piit79/frood 
Adds support for the 42. Keebs Frood RP2040 board
 2022-10-26 09:09:42 -05:00
Jeff Epler
76ed0445bb
Merge pull request #7120 from CDarius/m5stack_core_basic 
Added M5Stack Core Basic board
 2022-10-26 09:09:11 -05:00
Dan Halbert
56d8b9451f don't wait for pulls in PinAlarm 2022-10-25 20:42:08 -04:00
Dan Halbert
e49cd00d60 fix debug UART pins on Metro ESP32-S2 2022-10-25 20:41:08 -04:00
Georg Bøe
032bf63f2d Raise error with positive code in recv_into for espressif 2022-10-25 22:53:01 +02:00
Jeff Epler
0cf096dda1
pico w: implement sslsocket bind, listen, accept 2022-10-25 14:46:41 -05:00
CDario
f6e2369bbd Removed not available UART in board 2022-10-25 16:53:42 +00:00
CDario
f9983ff556 Added M5Stack Core Basic board 2022-10-25 16:42:14 +00:00
Jeff Epler
f997d0053d
Enable, use SOF_REUSEADDR 
This is the lwip no-os version of SO_REUSEADDR, which is set on all
listening sockets in the espressif port; do so here as well,
it makes running servers easier. The "address in use" error does
not occur.
 2022-10-25 10:09:16 -05:00
Petr Sedlacek
bd7f0e23d7 Adds support for the 42. Keebs Frood RP2040 board 
https://github.com/piit79/Frood
 2022-10-25 16:40:32 +02:00
CDario
c8191e8830 Better pins definitions 2022-10-25 11:41:39 +00:00
Kattni Rembor
5ea8b75e17 Add STEMMA_I2C() object to Picos for Cowbells. 2022-10-24 16:27:32 -04:00
CDario
5fa67548ea Added missing sdkconfig file 2022-10-24 20:03:06 +00:00
CDario
39171d7626 Removed unnecessary compiler flags 2022-10-24 19:21:26 +00:00
CDario
beab76c325 Added M5Stack Core Fire board 2022-10-24 18:38:30 +00:00
MicroDev
773bb99c96
Merge pull request #7099 from Neradoc/add-m5stampc3-board 
Add M5Stack Stamp C3 Board
 2022-10-23 00:05:44 +05:30
Neradoc
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk 
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
 2022-10-22 16:23:27 +02:00
microDev
8f0a674a1b
coproc module enhancements 
- add light and pretend-to-deep sleep support
- check coproc running status
 2022-10-22 19:08:49 +05:30
microDev
83b54d003d
implement more checks in coproc module 
- check memory address range
- check firmware size at an earlier stage
 2022-10-22 19:05:48 +05:30
Bill Sideris
7a50beb67e
PicoW more ap work 2022-10-22 11:58:44 +03:00
askpatrickw
d147712522 Add M5 Stamp C3 board 2022-10-22 00:45:54 +02:00
Dan Halbert
da7edf80e0
Merge pull request #7091 from MicroDev1/corpoc 
Add `CoprocAlarm`
 2022-10-21 13:36:01 -04:00
microDev
5b2728bd65
reorganize espressif mpconfigport.mk 2022-10-21 17:35:59 +05:30
microDev
2285dd1838
update espressif risc-v build configuration 
- use optimization level O2
- explicitly state risc-v arch
 2022-10-21 17:11:56 +05:30
Bill Sideris
8cc536bb7f
PicoW start_ap() 2022-10-21 13:20:16 +03:00
microDev
b33a2b45dc
add coproc alarm 2022-10-20 18:38:20 +05:30
MicroDev
b5b649801b
Merge pull request #6902 from MicroDev1/coproc 
Add `coproc` module
 2022-10-20 12:51:59 +05:30
microDev
5232e3f6c3
add coproc module 2022-10-20 09:09:44 +05:30
Dan Halbert
7015b7396e
Merge pull request #7089 from jepler/picow-gpio-number 
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
 2022-10-19 22:42:16 -04:00
Jeff Epler
576a1ac700
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated 
You might wonder how this fixes a problem with PulseIn, when the
changes aren't to any of those files! PulseIn is implemented in terms of
StateMachine, which had some assumptions about the relation between
the index of a pin object in mcu_pin_global_dict_table and its "pin
number". This was true, until some pins were removed from the
microcontroller module on Pico W.

Closes: #7078
 2022-10-19 21:09:50 -05:00
Jeff Epler
8bef4282c0
pico w: implement static configuration methods in wifi.Radio 2022-10-19 20:54:53 -05:00
Dan Halbert
31d7c91c85
Merge pull request #7059 from jepler/asyncio-tests-dogfood 
asyncio: we should dogfood our own asyncio implementation during automated tests
 2022-10-19 15:11:04 -04:00
Dan Halbert
08e1cdb282
Merge pull request #7079 from jepler/picow-2xmss 
Pico W grab bag
 2022-10-19 15:03:00 -04:00
Dan Halbert
607e917363
Merge pull request #7073 from MicroDev1/patch 
Fix 2/4MB Partition Tables & Makefile
 2022-10-17 22:29:16 -04:00
Jeff Epler
6e350a65cf
Merge pull request #7076 from bill88t/early-wifi 
Implement async wifi connection on picow
 2022-10-17 19:54:58 -05:00
Jeff Epler
3b7feccd9b
picow: Implement stop_station 
Weirdly we have to stop the AP too (which we never started),
or cyw43_tcpip_link_status still reports that STA is connected.
As long as AP mode isn't implemented, this doesn't matter and
we can just do it.
 2022-10-17 19:42:10 -05:00
Jeff Epler
57756863ef
picow: depending on memory pressure, may only be able to write 1 MSS 
Foamyguy discovered that trying to send >2920 bytes at once consistently
failed. I further discovered that sometimes trying to send >1460 bytes
would fail too.  By "fail", I mean that it would take a very long time
(around 200 * 50ms) before erroneously reporting that all bytes were
written.

In my testing, this change causes larger writes to successfully
send either 2920 or 1460 bytes (possibly after doing some 50ms waits
for a previous packet to clear).

The documentation of socket.send always stated that it COULD send fewer
bytes than requested, but adafruit_httpserver assumed that the number
of requested bytes were always sent, so after this change alone,
adafruit_httpserver will still not work properly.

Closes: #7077 (albeit fixes are needed in adafruit_httpserver too)
 2022-10-17 19:42:07 -05:00
Jeff Epler
861b22730e
picow: if initial write fails, write at most 1 TCP MSS of data 2022-10-17 19:28:02 -05:00
Jeff Epler
1975742d9f
picow: fix formatting numbers in lwip debug output 2022-10-17 19:28:02 -05:00
Jeff Epler
6128f4e5af
picow: add resolution of ".local" names 2022-10-17 19:28:01 -05:00
microDev
fb91c2f436
cleanup sdkconfig-esp32.defaults 
- remove log level: set by -opt or -debug sdkconfig
- remove lwip hostname: set by board specific sdkconfig
 2022-10-17 22:05:20 +05:30
Bill Sideris
47c373e67e
Use cyw43_tcpip_link_status instead 2022-10-17 18:33:32 +03:00
Bill Sideris
bce024f59e
Implement async wifi connection on picow 2022-10-17 18:17:14 +03:00
Jeff Epler
47541afc7c
picow: ask at a lower level if the interface is up 
Closes: #7072

```
Adafruit CircuitPython 8.0.0-beta.2-9-g5192082e64-dirty on 2022-10-17; Raspberry Pi Pico W with rp2040
>>> import wifi
>>> print(wifi.radio.ipv4_address)
None
>>> import os
>>> wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
>>> print(wifi.radio.ipv4_address)
10.0.2.94
```
 2022-10-17 10:08:50 -05:00
microDev
434c6d5604
fix uf2 bootloader condition in makefile 2022-10-17 19:45:48 +05:30
microDev
5114ae7a31
fix 2MB-no-uf2 partition table 2022-10-17 19:44:08 +05:30
microDev
f86377e0f1
fix 4MB-no-uf2 partition table 2022-10-17 19:42:41 +05:30
Jeff Epler
d4b1d4d430
Fix GPIO state when initializing CYW43 pin 
Closes: #7063
 2022-10-15 13:10:22 -05:00
microDev
e7b25dbf73
improve dualbank errors 2022-10-15 13:20:10 +05:30
Jeff Epler
6a8bc738ec
Make it easy to test just a subset of tests 
with e.g., 'make TEST_EXTRA="extmod/uasyncio*.py" test'
 2022-10-14 17:07:27 -05:00
Jeff Epler
963a51487a
unix Makefile: easy wait to print test failures as diffs 2022-10-14 14:44:52 -05:00
Dan Halbert
0ce84b27e8
Merge pull request #7053 from CytronTechnologies/add-pin-definitions-maker-feather-aiot-s3 
Added Pin Definitions for Cytron Maker Feather AIoT S3
 2022-10-14 11:31:53 -04:00
Dan Halbert
062d63ee3a
Merge pull request #7050 from jepler/picow-wirelsess-off-in-deep-sleep 
picow: Turn off wifi co-processor regulator when entering deep sleep
 2022-10-14 08:17:16 -04:00
Dan Halbert
8caafd9079
Merge pull request #7051 from jepler/picow-hashlib 
implement hashlib for picow
 2022-10-14 08:14:41 -04:00
Kong Wai Weng
fc00a6675e Added some pin definitions to match with the Arduino core. 2022-10-14 17:25:24 +08:00
microDev
66b539d768
fix espressif log level 2022-10-14 11:33:10 +05:30
Jeff Epler
3b3fe44174
implement hashlib for picow 2022-10-13 20:42:50 -05:00
Jeff Epler
0c5fd55c16
picow: Turn off wifi co-processor regulator when entering deep sleep 
This reduces power consumption during true deep sleep.

In my measurements with ppk2 and a program that _irrevocably_ entered
deep sleep (no time alarm or pin alarm), power usage as measured on a
ppk2 decreased from ~10mA to ~1mA.
 2022-10-13 20:10:10 -05:00
Dan Halbert
bb3e04a078
Merge pull request #7048 from georgboe/fix-recvinto-errno 
Return correct errno in raspberrypi's Socket.c
 2022-10-13 18:19:02 -04:00
Georg Bøe
e768b9ebb3 Return correct errno 2022-10-13 21:00:51 +02:00
Dan Halbert
de7a9c38fc Merge remote-tracking branch 'adafruit/main' into add-os-utime-function 2022-10-13 14:15:13 -04:00
Dan Halbert
1569c7ed33
Merge pull request #7045 from jepler/smaller-microcontroller-temperature-samd 
samd: Size-optimize the temperature code with an 0.5 to 2.0 degree relative additional error
 2022-10-13 14:02:51 -04:00
Dan Halbert
7e4b2a09eb
Merge pull request #7000 from MicroDev1/storage-extend 
Add Storage Extension Support
 2022-10-13 10:05:55 -04:00
microDev
728fea4ca4
add storage extension python api 2022-10-13 09:53:33 +05:30
Jeff Epler
f7d39ceae4
comment on the revised algorithm 2022-10-12 16:25:09 -05:00
Jeff Epler
a943167d69
samd: Reduce a further 48 bytes for non-full builds 
Another reduction of -48 bytes can be had if the fine calculation
step is skipped. The worst difference compared to the old reference
code with my calibration values in the 0° to 60° was 2°C,
and the difference at 25°C is 1°C.

The final size decrease for non-full builds like Trinket M0 is 268
bytes.
 2022-10-12 15:53:44 -05:00
Jeff Epler
b251e78ac5
samd: size-optimize microcontroller temp calc 
Perform most arithmetic with scaled integer values.
For my calibration values
```
const uint32_t NVMCTRL_TEMP_LOG[]={0xfc05511e, 0xcc7ac0f7};
```
the maximum difference between the old and new calculation is 0.50°C.
The difference is smallest (0.13°) at 25.87°C in the old scale.

This reduces mcu_processor_get_temperature from 568 bytes to 348 bytes
(-220 bytes)
 2022-10-12 15:44:14 -05:00
Jeff Epler
874ddd67bf
Pico W: ssl: factor out do_handshake 2022-10-12 11:38:30 -05:00
Jeff Epler
1641a7c002
Pico W: ssl: Correctly handle errors in send/recv 
The prefixed versions raise Python exceptions, the un-prefixed return
negative error values. We don't want to raise an exception from here,
it leaves the SSL stack in an undefined state.
 2022-10-12 11:38:30 -05:00
Jeff Epler
7c849fdadb
Pico W: ssl: Raise MemoryError for allocation errors 2022-10-12 11:38:29 -05:00
Jeff Epler
b1f7940297
Pico W: Correctly treat empty cadata= as disabling host checking 2022-10-12 11:38:29 -05:00
Jeff Epler
ca9523b814
Pico w: socket: Correctly return negative error code from recv_into 2022-10-12 11:38:29 -05:00
Jeff Epler
62cbd3bcd8
Pico w: socket: correctly track sockets generated by accept() 2022-10-12 11:38:26 -05:00
MicroDev
ab22d5a8cd
Merge pull request #7024 from flom84/stm-include-headers-fixes 
Remove redundant header files in STM port
 2022-10-12 10:22:29 +05:30
Dan Halbert
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev 
Add BananaPi BPI-PicoW-S3 .
 2022-10-11 22:53:37 -04:00
Wind-stormger
376df8ec7e Add BananaPi BPI-PicoW-S3 . 
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
 2022-10-12 09:11:25 +08:00
Dan Halbert
e19abef57e forgot to add these! 2022-10-11 13:12:43 -04:00
Dan Halbert
851f8a188d Merge remote-tracking branch 'adafruit/main' into HEAD 2022-10-11 12:21:59 -04:00
Dan Halbert
4cd370ecf8 Merge remote-tracking branch 'adafruit/main' into add-os-utime-function 2022-10-10 17:51:59 -04:00
Jeff Epler
0c8b261ec9
picow: Add support of self-signed certificates. 
## Testing self-signed certificates and `load_verify_locations`

Obtain the badssl "self-signed" certificate in the correct form:

```sh
openssl s_client -servername self-signed.badssl.com -connect untrusted-root.badssl.com:443 < /dev/null | openssl x509 > self-signed.pem
```

Copy it and the script to CIRCUITPY:
```python
import os
import wifi
import socketpool
import ssl
import adafruit_requests

TEXT_URL = "https://self-signed.badssl.com/"
if not wifi.radio.ipv4_address:
    wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))

pool = socketpool.SocketPool(wifi.radio)
context = ssl.create_default_context()
requests = adafruit_requests.Session(pool, context)

print(f"Fetching from {TEXT_URL} without certificate (should fail)")
try:
    response = requests.get(TEXT_URL)
except Exception as e:
    print(f"Failed: {e}")
else:
    print(f"{response.status_code=}, should have failed with exception")

print("Loading server certificate")
with open("/self-signed.pem", "rb") as certfile:
    context.load_verify_locations(cadata=certfile.read())
requests = adafruit_requests.Session(pool, context)

print(f"Fetching from {TEXT_URL} with certificate (should succeed)")
try:
    response = requests.get(TEXT_URL)
except Exception as e:
    print(f"Unexpected exception: {e}")
else:
    print(f"{response.status_code=}, should be 200 OK")
```
 2022-10-10 15:53:56 -05:00
Jeff Epler
c98174eea5
Add support for SSL client certificate (load_cert_chain) 
Tested with badssl.com:

 1. Get client certificates from https://badssl.com/download/
 2. Convert public portion with `openssl x509 -in badssl.com-client.pem -out CIRCUITPY/cert.pem`
 3. Convert private portion with `openssl rsa -in badssl.com-client.pem -out CIRCUITPY/privkey.pem` and the password `badssl.com`
 4. Put wifi settings in CIRCUITPY/.env
 5. Run the below Python script:

```py
import os
import wifi
import socketpool
import ssl
import adafruit_requests

TEXT_URL = "https://client.badssl.com/"
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))

pool = socketpool.SocketPool(wifi.radio)
context = ssl.create_default_context()
requests = adafruit_requests.Session(pool, context)

print(f"Fetching from {TEXT_URL} without certificate (should fail)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 400 Bad Request")
input("hit enter to continue\r")

print("Loading client certificate")
context.load_cert_chain("/cert.pem", "privkey.pem")
requests = adafruit_requests.Session(pool, context)

print(f"Fetching from {TEXT_URL} with certificate (should succeed)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 200 OK")
```
 2022-10-10 15:10:53 -05:00
flom84
81d227de73 Use types from circuitpython. 2022-10-10 20:55:44 +02:00
Florin Maticu
ab1de66dd3 Remove redundant header files. 2022-10-10 20:37:31 +02:00
Dan Halbert
14c9028c1f
Merge pull request #7026 from dhalbert/minor-space-savings 
save about 112 bytes
 2022-10-10 13:55:56 -04:00
Dan Halbert
de95463deb
Merge pull request #7023 from dhalbert/wifi-scanning-fixes 
update esp-idf; allow start/stop channels in wifi scanning
 2022-10-10 13:54:54 -04:00
Dan Halbert
8d344459cd
Merge pull request #7021 from jepler/pico-w-vbus-sense 
pico w: pins improvements
 2022-10-10 11:56:30 -04:00
Dan Halbert
86a0f9a861 save about 112 bytes 2022-10-09 19:22:39 -04:00
Dan Halbert
987030e706
Merge branch 'main' into add-os-utime-function 2022-10-07 22:45:51 -04:00
Dan Halbert
b097c0736a shrink some small builds 2022-10-07 22:44:06 -04:00
Dan Halbert
747dc7746d handle scan channel bounds but note they do nothing for RP2040 CYW43 2022-10-07 16:22:17 -04:00
Dan Halbert
21c0c4c1a6 update esp-idf; allow start/stop channels in wifi scanning 2022-10-07 15:29:09 -04:00
MicroDev
fc549fe345
Merge pull request #7014 from jepler/restore-nvm-module 
restore nvm module
 2022-10-08 00:12:41 +05:30
Dan Halbert
78b278e091 disable rainbowio on arduino_zero 2022-10-07 10:39:30 -04:00
Jeff Epler
f882571366
pico w: pins improvements 
Closes: #7017

 * Remove the 'GP23' alias for CYW1
 * Remove the 'CYW0' alias for CYW0
 * Switch VBUS_SENSE to CYW2, remove 'GP24' alias

Code that wants to use SMPS_MODE, VBUS_SENSE and LED while being
portable to the W and non-W variants should use those names, not alias
names.

 * Remove A3 / VOLTAGE_MONITOR

Right now this cannot be used. The ability to check the voltage monitor
should be added back in some fashion in the future.
 2022-10-07 08:48:36 -05:00
Dan Halbert
041885da1b
Merge pull request #7011 from jepler/pico-w-resize-circuitpy-again 
switch flash split to leave 512kB for CIRCUITPY
 2022-10-07 08:32:18 -04:00
Neradoc
3a6382d1ea cyw43.CywPin should be the class, not a string 2022-10-07 02:11:05 +02:00
Jeff Epler
644d293641
Fix CIRCUITPY drive offset in flash correctly, accounting for NVM 
.. and fix nvm to read/right the correct area.

.. putting a comment in link.ld to explain it all

Closes #7012
 2022-10-06 12:39:46 -05:00
Jeff Epler
07cd2ff065
restore 4kB gap pending resolution of #7011 2022-10-06 11:20:48 -05:00
Dan Halbert
8d82e4ba5f
Merge pull request #7008 from MicroDev1/patch 
Cleanup `mpconfigboard.mk` of espressif boards
 2022-10-06 11:20:11 -04:00
Jeff Epler
6e2c24083a
switch flash split to leave 512kB for CIRCUITPY 2022-10-06 10:12:22 -05:00
Dan Halbert
e0517c7379
Merge pull request #6999 from jepler/picow-ssl 
pico_w: implement ssl with caveats
 2022-10-06 10:51:36 -04:00
microDev
4f753251db
cleanup mpconfigboard.mk of espressif boards 
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
 2022-10-06 16:15:01 +05:30
microDev
b0ef35d50b
update storage extension implementation 2022-10-06 09:19:56 +05:30
Dan Halbert
296960dd89 shorten board.c 2022-10-05 20:23:19 -04:00
Neradoc
d31acdef6c
we don't use AUTORESET_DELAY_MS 2022-10-06 02:19:48 +02:00
Jeff Epler
2dc283f578
close underlying socket object when closing ssl socket 2022-10-05 15:10:14 -05:00
Jeff Epler
4a9389d347
remove debug message 2022-10-05 14:57:04 -05:00
Jeff Epler
14f2309b6f
Enable more key exchange methods 
This is intended (but not entirely verified) to match our esp32 builds.
It does fix accessing https://circuitpython.org, which failed before with
"MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE".

It still doesn't work on a personal website of mine with valid letsencrypt
certificate but I haven't verified whether it works on esp32s2 with CP.
That site only allows TLS 1.3, while this mbedtls only supports up to
1.2.
The version of mbedtls we adopted based on micropython's use has no
TLS 1.3 support, but the one in espressif esp-idf does.
 2022-10-05 14:56:27 -05:00
Jeff Epler
fabfdcf6fe
More ssl work 2022-10-05 14:56:26 -05:00
Jeff Epler
944d388158
copy esp_crt_bundle.c from esp-idf@d51f7d8821 2022-10-05 14:56:26 -05:00
Jeff Epler
a64c1a11c5
move nina-fw certificates so it can be shared with other ports 2022-10-05 14:56:25 -05:00
Jeff Epler
09023abcd2
Update espressif function prototype to match 2022-10-05 14:56:25 -05:00
Kyle Mohr
dd5f9411c8
Merge branch 'adafruit:main' into main 2022-10-05 13:44:12 -05:00
Jeff Epler
dcb650c513 pico w: add ssl module 
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
 2022-10-05 13:12:43 -04:00
Jeff Epler
2bd50673b6
Finish adapting flash storage size 
Before this, CIRCUITPY would start at 1MB anyway. This appeared to work
only because I hadn't checked the actual size of the CIRCUITPY drive,
and because until now the flash hadn't actually crossed that 1MB
boundary into CIRCUITPY storage.

WARNING: on pico_w, upgrading/downgrading CircuitPython across this commit
boundary will erase the CIRCUITPY filesystem. After this commit,
switching between pico and pico_w firmware will erase the CIRCUITPY
filesystem
 2022-10-05 10:02:38 -05:00
Jeff Epler
52bca95208
Refactor dotenv module so that it can be tested on host 
.. it needs to operate on a FILE* rather than FIL depending on
the build.

Note that this is comparing output to expected, not to cpython dotenv
package. Because run-tests.py starts the CPython interpreter with the
'-S' (skip site initialization) flag, pip-installed packages are
not available for import inside a test file. Instead, the exp
file is generated manually:
```
circuitpython/tests$ python3 circuitpython/dotenv_test.py > circuitpython/dotenv_test.py.exp
```

Unfortunately, the test fails on test e15:
```diff
FAILURE /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py
--- /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py.exp	2022-10-04 09:48:16.307703128 -0500
+++ /home/jepler/src/circuitpython/tests/results/circuitpython_dotenv_test.py.out	2022-10-04 09:48:16.307703128 -0500
@@ -14,7 +14,7 @@
 line
 e13 e13value
 e14 None
-e15 e15value
+e15 None
 e16 #
 e17 def
 e18 #has a hash
```
 2022-10-04 09:51:27 -05:00
microDev
2618e11002
use next update partition 2022-10-04 19:42:48 +05:30
microDev
9fe7308b88
conditionally add storage extension 2022-10-04 17:26:28 +05:30
microDev
7d8ff20dac
add initial storage extension support 2022-10-04 17:25:48 +05:30
Kyle Mohr
02e115cbc2
Update mpconfigboard.mk 2022-10-04 00:03:59 -05:00
Kyle Mohr
330b96726a add newlines to end of files 2022-10-04 04:56:31 +00:00
Kyle Mohr
5268ef01c9
Utilize VID/PID from native USB port 2022-10-03 23:45:28 -05:00
Kyle Mohr
cffc1bfcab
sdkconfig didn't get committed for some reason... 2022-10-03 22:54:31 -05:00
Kyle Mohr
a948dc399b add esp32-s2-devkitc-1-n8r2 variant 2022-10-04 03:51:51 +00:00
Dan Halbert
90f6096955 fix ai-thinker creation ids; fix some typos elsewhere 2022-10-03 15:29:03 -04:00
Dan Halbert
ad79f595a5
Merge pull request #6974 from MicroDev1/patch 
Couple Minor Fixes
 2022-10-01 13:12:01 -04:00
Dan Halbert
7bb90dbf45 remove redundant port/*/.gitignore; cleanup others 2022-10-01 11:52:36 -04:00
Jeff Epler
40c2de833d
doc improvements 2022-10-01 10:09:33 -05:00
Jeff Epler
d3e85d165e
Set cyw43 power management as needed, default to disabled 
.. the value actually needs to be enforced each time the STA or AP
is enabled, because internally there's a call to cyw43_wifi_pm with the
library's defaut power management value, not ours.

Add a getter, though it only returns our idea of what the power
management register is set to, it doesn't read out from the actual
hardware, sadly.
 2022-10-01 08:20:34 -05:00
Jeff Epler
943b992bfc
Improve cyw43.set_power_management documentation 
.. and provide 4 preset values
 2022-10-01 07:52:08 -05:00
microDev
7eaeca4eb3
update espressif port's .gitignore 2022-10-01 09:14:48 +05:30
Dan Halbert
f9e655da47
Merge pull request #6962 from dhalbert/espressif-deep-sleep-hold-pins 
Espressif: do not hold pins during deep sleep if not necessary
 2022-09-30 22:20:44 -04:00
Dan Halbert
bced76887e
Merge pull request #6973 from jepler/rp2040-fix-warnings 
Rp2040 fix warnings
 2022-09-30 16:21:31 -04:00
Jeff Epler
c02602ace1
Enable strict-overflow diagnostic 2022-09-30 11:19:23 -05:00
Jeff Epler
afc1c0e3bb
Fix unused variable diagnostics, make it a fatal error 2022-09-30 11:19:22 -05:00
Jeff Epler
37620d4eb0
Fix several classes of compiler diagnostic & make fatal 
* -Wno-nested-externs
 * -Wno-strict-prototypes
 * -Wno-double-promotion
 * -Wno-sign-compare
 2022-09-30 11:19:22 -05:00
Jeff Epler
c6eef3931f
Enable warning for unused static functions 2022-09-30 11:19:22 -05:00
Jeff Epler
2c9c6fc80e
Remove unused static functions 2022-09-30 11:19:21 -05:00
Jeff Epler
907c5d387f
Tweak black_bindings 
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.

Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation

This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)

It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.

I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
 2022-09-30 11:18:13 -05:00
Jeff Epler
fcf7cfe838
Merge pull request #6960 from jepler/picow-server 
Pico W: implement more things
 2022-09-30 11:15:37 -05:00
Jeff Epler
0912889106
raspberrypi: statically allocate storage for hostname 2022-09-30 10:05:11 -05:00
Jeff Epler
84c7ac4a81
Make cyw43.set_power_management() be a function as intended 2022-09-30 07:56:59 -05:00
Jeff Epler
3281e14be1
fix reference to board module 2022-09-29 21:37:34 -05:00
Jeff Epler
4de9487820
It turns out you CAN have too many GPIO 2022-09-29 20:10:33 -05:00
Dan Halbert
9d1b12066d Espressif: do not hold pins during deep sleep if not necessary 2022-09-29 20:11:48 -04:00
flom84
7af8a23ddf Use macro for computing size of array. 2022-09-29 22:10:21 +02:00
flom84
3609c29b27 Update STM DFU mode software implementation. 
- fix for sizeof array calculation.

 - follow ARM recommendation to turn off interruptions with NVIC.
 2022-09-29 21:15:51 +02:00
Jeff Epler
510bd11f58
Enable reading back value of cyw43 pin 
Now, `led.value = not led.value` works as a way to toggle the LED state.

Closes: #6959
 2022-09-29 11:06:11 -05:00
Jeff Epler
a3bcfd6911
Add pin_CYW1 for SMPS_MODE 2022-09-29 10:54:06 -05:00
Jeff Epler
72b06021c0
fix doc formatting 2022-09-29 10:27:13 -05:00
Jeff Epler
74cdf42ece
pico w: implement bind, listen, accept 
this works with some simple tcp & udp echo service code
 2022-09-29 10:02:20 -05:00
Jeff Epler
12ea04ca70
Add cyw43.set_power_management 2022-09-29 10:02:20 -05:00
Jeff Epler
91f1266db5
Document CywPin 2022-09-29 10:02:19 -05:00
Jeff Epler
56f9f0d136
add tx power get/set 2022-09-29 10:02:19 -05:00
Jeff Epler
71a00157ba
Add hostname setting 2022-09-29 10:02:19 -05:00
Jeff Epler
c6d3163841
remove comment about something the Makefile does now 2022-09-29 10:02:18 -05:00
Dan Halbert
db065a299f
Merge pull request #6933 from jepler/🥧🐮 
Implement a useful subset of `wifi` and `socketpool` modules on 🥧🐮
 2022-09-28 18:09:24 -04:00
Jeff Epler
2dd6df9d93
better to explain why this file has no useful content 2022-09-28 15:19:06 -05:00
Jeff Epler
72bce51ce3
restore submodule commits 2022-09-28 14:48:54 -05:00
Jeff Epler
3d76aa00f5
implementations not needed 2022-09-28 14:38:13 -05:00
Jeff Epler
09d4fbc557
Remove FIXME 
this was verbatim-copied from micropython
 2022-09-28 14:38:13 -05:00
Jeff Epler
6189156a0b
Add missing NotImplementedErrors 2022-09-28 14:38:12 -05:00
Jeff Epler
edf1efd728
Add CYW43 guards to more things 2022-09-28 14:38:12 -05:00
Jeff Epler
e100981d90
revert CFLAGS change 2022-09-28 14:38:12 -05:00
Jeff Epler
4380292848
comment why not actually reset wifi 2022-09-28 14:38:11 -05:00
Jeff Epler
ff7731491e
Implement enough of socketpool to do ntp and non-https requests 2022-09-28 10:06:34 -05:00
Jeff Epler
a7a1bd7880
Implement DNS resolution 
```
>>> s = socketpool.SocketPool(wifi.radio)
>>> s.getaddrinfo("google.com", 80)
[(0, 0, 0, '', ('142.250.81.206', 80))]
```
 2022-09-28 10:06:33 -05:00
Jeff Epler
6c3cdceb45
Implement scan, connect, ping 
My pings go out, and then they come back

```py
import os
import wifi
import ipaddress

wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
 2022-09-28 10:06:33 -05:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out 2022-09-28 10:06:33 -05:00
Jeff Epler
22b04aef22
Reindent a block 2022-09-28 10:05:53 -05:00
Jeff Epler
9caa65cf28
allow a board to override link.ld 2022-09-28 10:05:53 -05:00
Jeff Epler
77fcb8a5a3
disable rainbowio on this arduino_nano_33_iot 
The gpio changes took away enough code space that it doesn't fit.
 2022-09-28 10:05:32 -05:00
Dan Halbert
39492b3403
Merge pull request #6951 from jepler/black-bindings 
Black bindings
 2022-09-27 17:57:07 -04:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings 2022-09-27 15:21:42 -05:00
Jeff Epler
4e96667d50
Manual fix for oddball cases 2022-09-27 15:19:32 -05:00
Kattni Rembor
ea5e4b20b0 Add more spacing for aliased pins. 2022-09-27 15:50:30 -04:00
Kattni Rembor
9c4c7241d0 Update pin order to match silk. 2022-09-27 15:24:07 -04:00
flom_84
96a83ecbfe
Update mpconfigboard.h 2022-09-26 19:58:33 +02:00
flom84
e626502fd2 Add USB VID and PID from STM. 2022-09-26 19:45:33 +02:00
flom84
2bd2406d13 Update license info and remove redundant board functions. 2022-09-26 19:39:07 +02:00
Florin Maticu
8754a6ec53 Add circuitpython support for STM Nucleo-F446RE. 2022-09-26 19:12:42 +02:00
Dan Halbert
de80db681f
Merge pull request #6915 from dhalbert/ringbuf-cleanup 
ringbuf cleanup
 2022-09-25 17:50:21 -04:00
Jeff Epler
1c8e12660c
Merge pull request #6944 from Neradoc/doc-fix-usb-cdc 
docs: usb_cdc.Serial.readinto has no nbytes parameter
 2022-09-25 13:35:58 -05:00
Dan Halbert
e25c195b78 fix broadcom UART ringbuf init 2022-09-25 09:12:23 -04:00
Neradoc
5346b89b08 don't use @property in docs, just document as a property 2022-09-25 07:18:18 +02:00
Dan Halbert
d44edc4a0c
Merge pull request #6937 from jepler/issue6839 
Use new unique ID for this board
 2022-09-24 23:55:06 -04:00
Jeff Epler
f12136af7f
esp32-camera: sync doc with code. 
Closes: #6836
 2022-09-23 08:54:00 -05:00
Jeff Epler
5bbbca4d44
lock and unlock i2c bus around any ops that might access it 2022-09-22 17:03:05 -05:00
Jeff Epler
a769beed3f
Use new unique ID for this board 2022-09-22 16:23:38 -05:00
Dan Halbert
ea15a9118a ringbuf cleanup 2022-09-21 10:03:05 -04:00
Dan Halbert
c567b43441 add CIRCUITPY_USB_IDENTIFICATION to turn off on smallest builds 2022-09-20 14:32:38 -04:00
Florin Maticu
745d83adac DFU mode implementation for STM32F4 MCU. 2022-09-18 18:24:38 +02:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main 
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
 2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4 2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition 2022-09-17 16:53:24 -04:00
Dan Halbert
8a568d18b5
Merge pull request #6757 from latkinso42/adcdma 
analogbufio
 2022-09-16 08:32:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep 
allow preserving pin state during deep sleep
 2022-09-16 17:52:04 +05:30
MicroDev
f994b11d52
Merge pull request #6909 from dhalbert/fesp32s2tft-remove-unneeded-code 
Remove unneeded workaround for Feather ESP32-S2 TFT
 2022-09-16 10:18:13 +05:30
Dan Halbert
7914870f9a
Merge pull request #6908 from dhalbert/nrf-busio-none-empty-uart-read 
nrf: return None when UART.read() reads nothing
 2022-09-15 22:12:06 -04:00
Dan Halbert
6bb47038d5 Merge remote-tracking branch 'adafruit/main' into adcdma 2022-09-15 20:42:51 -04:00
Dan Halbert
0ab4f12dc4 fix some submodules commit skew 2022-09-15 20:36:29 -04:00
Dan Halbert
82694b7265 remove extraneous copyrights 2022-09-15 20:31:08 -04:00
Dan Halbert
4df8a51982 Remove unneeded workaround for Feather ESP32-S2 TFT 2022-09-15 20:06:47 -04:00
Dan Halbert
3abfd212ec nrf: return None when UART.read() reads nothing 2022-09-15 19:40:02 -04:00
Dan Halbert
60f43b1703 allow preserving pin state during deep sleep 2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf Add BananaPi BPI-Leaf-S3. 
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
 2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset 
Espressif pwmout reset fixes
 2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR 
Add BananaPi BPI-Bit-S2 .
 2022-09-13 23:02:46 -04:00